Merge ../to-linus
[linux-2.6] / drivers / acpi / events / evgpeblk.c
1 /******************************************************************************
2  *
3  * Module Name: evgpeblk - GPE block creation and initialization.
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2005, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include <acpi/acevents.h>
46 #include <acpi/acnamesp.h>
47
48 #define _COMPONENT          ACPI_EVENTS
49 ACPI_MODULE_NAME("evgpeblk")
50
51 /* Local prototypes */
52 static acpi_status
53 acpi_ev_save_method_info(acpi_handle obj_handle,
54                          u32 level, void *obj_desc, void **return_value);
55
56 static acpi_status
57 acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
58                           u32 level, void *info, void **return_value);
59
60 static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
61                                                                interrupt_number);
62
63 static acpi_status
64 acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt);
65
66 static acpi_status
67 acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
68                           u32 interrupt_number);
69
70 static acpi_status
71 acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block);
72
73 /*******************************************************************************
74  *
75  * FUNCTION:    acpi_ev_valid_gpe_event
76  *
77  * PARAMETERS:  gpe_event_info              - Info for this GPE
78  *
79  * RETURN:      TRUE if the gpe_event is valid
80  *
81  * DESCRIPTION: Validate a GPE event.  DO NOT CALL FROM INTERRUPT LEVEL.
82  *              Should be called only when the GPE lists are semaphore locked
83  *              and not subject to change.
84  *
85  ******************************************************************************/
86
87 u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info)
88 {
89         struct acpi_gpe_xrupt_info *gpe_xrupt_block;
90         struct acpi_gpe_block_info *gpe_block;
91
92         ACPI_FUNCTION_ENTRY();
93
94         /* No need for spin lock since we are not changing any list elements */
95
96         /* Walk the GPE interrupt levels */
97
98         gpe_xrupt_block = acpi_gbl_gpe_xrupt_list_head;
99         while (gpe_xrupt_block) {
100                 gpe_block = gpe_xrupt_block->gpe_block_list_head;
101
102                 /* Walk the GPE blocks on this interrupt level */
103
104                 while (gpe_block) {
105                         if ((&gpe_block->event_info[0] <= gpe_event_info) &&
106                             (&gpe_block->
107                              event_info[((acpi_size) gpe_block->
108                                          register_count) * 8] >
109                              gpe_event_info)) {
110                                 return (TRUE);
111                         }
112
113                         gpe_block = gpe_block->next;
114                 }
115
116                 gpe_xrupt_block = gpe_xrupt_block->next;
117         }
118
119         return (FALSE);
120 }
121
122 /*******************************************************************************
123  *
124  * FUNCTION:    acpi_ev_walk_gpe_list
125  *
126  * PARAMETERS:  gpe_walk_callback   - Routine called for each GPE block
127  *
128  * RETURN:      Status
129  *
130  * DESCRIPTION: Walk the GPE lists.
131  *
132  ******************************************************************************/
133
134 acpi_status acpi_ev_walk_gpe_list(ACPI_GPE_CALLBACK gpe_walk_callback)
135 {
136         struct acpi_gpe_block_info *gpe_block;
137         struct acpi_gpe_xrupt_info *gpe_xrupt_info;
138         acpi_status status = AE_OK;
139         u32 flags;
140
141         ACPI_FUNCTION_TRACE("ev_walk_gpe_list");
142
143         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
144
145         /* Walk the interrupt level descriptor list */
146
147         gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
148         while (gpe_xrupt_info) {
149                 /* Walk all Gpe Blocks attached to this interrupt level */
150
151                 gpe_block = gpe_xrupt_info->gpe_block_list_head;
152                 while (gpe_block) {
153                         /* One callback per GPE block */
154
155                         status = gpe_walk_callback(gpe_xrupt_info, gpe_block);
156                         if (ACPI_FAILURE(status)) {
157                                 goto unlock_and_exit;
158                         }
159
160                         gpe_block = gpe_block->next;
161                 }
162
163                 gpe_xrupt_info = gpe_xrupt_info->next;
164         }
165
166       unlock_and_exit:
167         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
168         return_ACPI_STATUS(status);
169 }
170
171 /*******************************************************************************
172  *
173  * FUNCTION:    acpi_ev_delete_gpe_handlers
174  *
175  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
176  *              gpe_block           - Gpe Block info
177  *
178  * RETURN:      Status
179  *
180  * DESCRIPTION: Delete all Handler objects found in the GPE data structs.
181  *              Used only prior to termination.
182  *
183  ******************************************************************************/
184
185 acpi_status
186 acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
187                             struct acpi_gpe_block_info *gpe_block)
188 {
189         struct acpi_gpe_event_info *gpe_event_info;
190         acpi_native_uint i;
191         acpi_native_uint j;
192
193         ACPI_FUNCTION_TRACE("ev_delete_gpe_handlers");
194
195         /* Examine each GPE Register within the block */
196
197         for (i = 0; i < gpe_block->register_count; i++) {
198                 /* Now look at the individual GPEs in this byte register */
199
200                 for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
201                         gpe_event_info =
202                             &gpe_block->
203                             event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j];
204
205                         if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
206                             ACPI_GPE_DISPATCH_HANDLER) {
207                                 ACPI_MEM_FREE(gpe_event_info->dispatch.handler);
208                                 gpe_event_info->dispatch.handler = NULL;
209                                 gpe_event_info->flags &=
210                                     ~ACPI_GPE_DISPATCH_MASK;
211                         }
212                 }
213         }
214
215         return_ACPI_STATUS(AE_OK);
216 }
217
218 /*******************************************************************************
219  *
220  * FUNCTION:    acpi_ev_save_method_info
221  *
222  * PARAMETERS:  Callback from walk_namespace
223  *
224  * RETURN:      Status
225  *
226  * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
227  *              control method under the _GPE portion of the namespace.
228  *              Extract the name and GPE type from the object, saving this
229  *              information for quick lookup during GPE dispatch
230  *
231  *              The name of each GPE control method is of the form:
232  *              "_Lxx" or "_Exx"
233  *              Where:
234  *                  L      - means that the GPE is level triggered
235  *                  E      - means that the GPE is edge triggered
236  *                  xx     - is the GPE number [in HEX]
237  *
238  ******************************************************************************/
239
240 static acpi_status
241 acpi_ev_save_method_info(acpi_handle obj_handle,
242                          u32 level, void *obj_desc, void **return_value)
243 {
244         struct acpi_gpe_block_info *gpe_block = (void *)obj_desc;
245         struct acpi_gpe_event_info *gpe_event_info;
246         u32 gpe_number;
247         char name[ACPI_NAME_SIZE + 1];
248         u8 type;
249         acpi_status status;
250
251         ACPI_FUNCTION_TRACE("ev_save_method_info");
252
253         /*
254          * _Lxx and _Exx GPE method support
255          *
256          * 1) Extract the name from the object and convert to a string
257          */
258         ACPI_MOVE_32_TO_32(name,
259                            &((struct acpi_namespace_node *)obj_handle)->name.
260                            integer);
261         name[ACPI_NAME_SIZE] = 0;
262
263         /*
264          * 2) Edge/Level determination is based on the 2nd character
265          *    of the method name
266          *
267          * NOTE: Default GPE type is RUNTIME.  May be changed later to WAKE
268          * if a _PRW object is found that points to this GPE.
269          */
270         switch (name[1]) {
271         case 'L':
272                 type = ACPI_GPE_LEVEL_TRIGGERED;
273                 break;
274
275         case 'E':
276                 type = ACPI_GPE_EDGE_TRIGGERED;
277                 break;
278
279         default:
280                 /* Unknown method type, just ignore it! */
281
282                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
283                                   "Unknown GPE method type: %s (name not of form _Lxx or _Exx)\n",
284                                   name));
285                 return_ACPI_STATUS(AE_OK);
286         }
287
288         /* Convert the last two characters of the name to the GPE Number */
289
290         gpe_number = ACPI_STRTOUL(&name[2], NULL, 16);
291         if (gpe_number == ACPI_UINT32_MAX) {
292                 /* Conversion failed; invalid method, just ignore it */
293
294                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
295                                   "Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)\n",
296                                   name));
297                 return_ACPI_STATUS(AE_OK);
298         }
299
300         /* Ensure that we have a valid GPE number for this GPE block */
301
302         if ((gpe_number < gpe_block->block_base_number) ||
303             (gpe_number >=
304              (gpe_block->block_base_number +
305               (gpe_block->register_count * 8)))) {
306                 /*
307                  * Not valid for this GPE block, just ignore it
308                  * However, it may be valid for a different GPE block, since GPE0 and GPE1
309                  * methods both appear under \_GPE.
310                  */
311                 return_ACPI_STATUS(AE_OK);
312         }
313
314         /*
315          * Now we can add this information to the gpe_event_info block
316          * for use during dispatch of this GPE.  Default type is RUNTIME, although
317          * this may change when the _PRW methods are executed later.
318          */
319         gpe_event_info =
320             &gpe_block->event_info[gpe_number - gpe_block->block_base_number];
321
322         gpe_event_info->flags = (u8) (type | ACPI_GPE_DISPATCH_METHOD |
323                                       ACPI_GPE_TYPE_RUNTIME);
324
325         gpe_event_info->dispatch.method_node =
326             (struct acpi_namespace_node *)obj_handle;
327
328         /* Update enable mask, but don't enable the HW GPE as of yet */
329
330         status = acpi_ev_enable_gpe(gpe_event_info, FALSE);
331
332         ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
333                           "Registered GPE method %s as GPE number 0x%.2X\n",
334                           name, gpe_number));
335         return_ACPI_STATUS(status);
336 }
337
338 /*******************************************************************************
339  *
340  * FUNCTION:    acpi_ev_match_prw_and_gpe
341  *
342  * PARAMETERS:  Callback from walk_namespace
343  *
344  * RETURN:      Status.  NOTE: We ignore errors so that the _PRW walk is
345  *              not aborted on a single _PRW failure.
346  *
347  * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
348  *              Device.  Run the _PRW method.  If present, extract the GPE
349  *              number and mark the GPE as a WAKE GPE.
350  *
351  ******************************************************************************/
352
353 static acpi_status
354 acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
355                           u32 level, void *info, void **return_value)
356 {
357         struct acpi_gpe_walk_info *gpe_info = (void *)info;
358         struct acpi_namespace_node *gpe_device;
359         struct acpi_gpe_block_info *gpe_block;
360         struct acpi_namespace_node *target_gpe_device;
361         struct acpi_gpe_event_info *gpe_event_info;
362         union acpi_operand_object *pkg_desc;
363         union acpi_operand_object *obj_desc;
364         u32 gpe_number;
365         acpi_status status;
366
367         ACPI_FUNCTION_TRACE("ev_match_prw_and_gpe");
368
369         /* Check for a _PRW method under this device */
370
371         status = acpi_ut_evaluate_object(obj_handle, METHOD_NAME__PRW,
372                                          ACPI_BTYPE_PACKAGE, &pkg_desc);
373         if (ACPI_FAILURE(status)) {
374                 /* Ignore all errors from _PRW, we don't want to abort the subsystem */
375
376                 return_ACPI_STATUS(AE_OK);
377         }
378
379         /* The returned _PRW package must have at least two elements */
380
381         if (pkg_desc->package.count < 2) {
382                 goto cleanup;
383         }
384
385         /* Extract pointers from the input context */
386
387         gpe_device = gpe_info->gpe_device;
388         gpe_block = gpe_info->gpe_block;
389
390         /*
391          * The _PRW object must return a package, we are only interested
392          * in the first element
393          */
394         obj_desc = pkg_desc->package.elements[0];
395
396         if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
397                 /* Use FADT-defined GPE device (from definition of _PRW) */
398
399                 target_gpe_device = acpi_gbl_fadt_gpe_device;
400
401                 /* Integer is the GPE number in the FADT described GPE blocks */
402
403                 gpe_number = (u32) obj_desc->integer.value;
404         } else if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) {
405                 /* Package contains a GPE reference and GPE number within a GPE block */
406
407                 if ((obj_desc->package.count < 2) ||
408                     (ACPI_GET_OBJECT_TYPE(obj_desc->package.elements[0]) !=
409                      ACPI_TYPE_LOCAL_REFERENCE)
410                     || (ACPI_GET_OBJECT_TYPE(obj_desc->package.elements[1]) !=
411                         ACPI_TYPE_INTEGER)) {
412                         goto cleanup;
413                 }
414
415                 /* Get GPE block reference and decode */
416
417                 target_gpe_device =
418                     obj_desc->package.elements[0]->reference.node;
419                 gpe_number = (u32) obj_desc->package.elements[1]->integer.value;
420         } else {
421                 /* Unknown type, just ignore it */
422
423                 goto cleanup;
424         }
425
426         /*
427          * Is this GPE within this block?
428          *
429          * TRUE iff these conditions are true:
430          *     1) The GPE devices match.
431          *     2) The GPE index(number) is within the range of the Gpe Block
432          *          associated with the GPE device.
433          */
434         if ((gpe_device == target_gpe_device) &&
435             (gpe_number >= gpe_block->block_base_number) &&
436             (gpe_number <
437              gpe_block->block_base_number + (gpe_block->register_count * 8))) {
438                 gpe_event_info =
439                     &gpe_block->event_info[gpe_number -
440                                            gpe_block->block_base_number];
441
442                 /* Mark GPE for WAKE-ONLY but WAKE_DISABLED */
443
444                 gpe_event_info->flags &=
445                     ~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED);
446                 status =
447                     acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
448                 if (ACPI_FAILURE(status)) {
449                         goto cleanup;
450                 }
451                 status =
452                     acpi_ev_update_gpe_enable_masks(gpe_event_info,
453                                                     ACPI_GPE_DISABLE);
454         }
455
456       cleanup:
457         acpi_ut_remove_reference(pkg_desc);
458         return_ACPI_STATUS(AE_OK);
459 }
460
461 /*******************************************************************************
462  *
463  * FUNCTION:    acpi_ev_get_gpe_xrupt_block
464  *
465  * PARAMETERS:  interrupt_number     - Interrupt for a GPE block
466  *
467  * RETURN:      A GPE interrupt block
468  *
469  * DESCRIPTION: Get or Create a GPE interrupt block.  There is one interrupt
470  *              block per unique interrupt level used for GPEs.
471  *              Should be called only when the GPE lists are semaphore locked
472  *              and not subject to change.
473  *
474  ******************************************************************************/
475
476 static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
477                                                                interrupt_number)
478 {
479         struct acpi_gpe_xrupt_info *next_gpe_xrupt;
480         struct acpi_gpe_xrupt_info *gpe_xrupt;
481         acpi_status status;
482         u32 flags;
483
484         ACPI_FUNCTION_TRACE("ev_get_gpe_xrupt_block");
485
486         /* No need for lock since we are not changing any list elements here */
487
488         next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
489         while (next_gpe_xrupt) {
490                 if (next_gpe_xrupt->interrupt_number == interrupt_number) {
491                         return_PTR(next_gpe_xrupt);
492                 }
493
494                 next_gpe_xrupt = next_gpe_xrupt->next;
495         }
496
497         /* Not found, must allocate a new xrupt descriptor */
498
499         gpe_xrupt = ACPI_MEM_CALLOCATE(sizeof(struct acpi_gpe_xrupt_info));
500         if (!gpe_xrupt) {
501                 return_PTR(NULL);
502         }
503
504         gpe_xrupt->interrupt_number = interrupt_number;
505
506         /* Install new interrupt descriptor with spin lock */
507
508         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
509         if (acpi_gbl_gpe_xrupt_list_head) {
510                 next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
511                 while (next_gpe_xrupt->next) {
512                         next_gpe_xrupt = next_gpe_xrupt->next;
513                 }
514
515                 next_gpe_xrupt->next = gpe_xrupt;
516                 gpe_xrupt->previous = next_gpe_xrupt;
517         } else {
518                 acpi_gbl_gpe_xrupt_list_head = gpe_xrupt;
519         }
520         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
521
522         /* Install new interrupt handler if not SCI_INT */
523
524         if (interrupt_number != acpi_gbl_FADT->sci_int) {
525                 status = acpi_os_install_interrupt_handler(interrupt_number,
526                                                            acpi_ev_gpe_xrupt_handler,
527                                                            gpe_xrupt);
528                 if (ACPI_FAILURE(status)) {
529                         ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
530                                           "Could not install GPE interrupt handler at level 0x%X\n",
531                                           interrupt_number));
532                         return_PTR(NULL);
533                 }
534         }
535
536         return_PTR(gpe_xrupt);
537 }
538
539 /*******************************************************************************
540  *
541  * FUNCTION:    acpi_ev_delete_gpe_xrupt
542  *
543  * PARAMETERS:  gpe_xrupt       - A GPE interrupt info block
544  *
545  * RETURN:      Status
546  *
547  * DESCRIPTION: Remove and free a gpe_xrupt block. Remove an associated
548  *              interrupt handler if not the SCI interrupt.
549  *
550  ******************************************************************************/
551
552 static acpi_status
553 acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
554 {
555         acpi_status status;
556         u32 flags;
557
558         ACPI_FUNCTION_TRACE("ev_delete_gpe_xrupt");
559
560         /* We never want to remove the SCI interrupt handler */
561
562         if (gpe_xrupt->interrupt_number == acpi_gbl_FADT->sci_int) {
563                 gpe_xrupt->gpe_block_list_head = NULL;
564                 return_ACPI_STATUS(AE_OK);
565         }
566
567         /* Disable this interrupt */
568
569         status = acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
570                                                   acpi_ev_gpe_xrupt_handler);
571         if (ACPI_FAILURE(status)) {
572                 return_ACPI_STATUS(status);
573         }
574
575         /* Unlink the interrupt block with lock */
576
577         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
578         if (gpe_xrupt->previous) {
579                 gpe_xrupt->previous->next = gpe_xrupt->next;
580         }
581
582         if (gpe_xrupt->next) {
583                 gpe_xrupt->next->previous = gpe_xrupt->previous;
584         }
585         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
586
587         /* Free the block */
588
589         ACPI_MEM_FREE(gpe_xrupt);
590         return_ACPI_STATUS(AE_OK);
591 }
592
593 /*******************************************************************************
594  *
595  * FUNCTION:    acpi_ev_install_gpe_block
596  *
597  * PARAMETERS:  gpe_block       - New GPE block
598  *              interrupt_number - Xrupt to be associated with this GPE block
599  *
600  * RETURN:      Status
601  *
602  * DESCRIPTION: Install new GPE block with mutex support
603  *
604  ******************************************************************************/
605
606 static acpi_status
607 acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
608                           u32 interrupt_number)
609 {
610         struct acpi_gpe_block_info *next_gpe_block;
611         struct acpi_gpe_xrupt_info *gpe_xrupt_block;
612         acpi_status status;
613         u32 flags;
614
615         ACPI_FUNCTION_TRACE("ev_install_gpe_block");
616
617         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
618         if (ACPI_FAILURE(status)) {
619                 return_ACPI_STATUS(status);
620         }
621
622         gpe_xrupt_block = acpi_ev_get_gpe_xrupt_block(interrupt_number);
623         if (!gpe_xrupt_block) {
624                 status = AE_NO_MEMORY;
625                 goto unlock_and_exit;
626         }
627
628         /* Install the new block at the end of the list with lock */
629
630         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
631         if (gpe_xrupt_block->gpe_block_list_head) {
632                 next_gpe_block = gpe_xrupt_block->gpe_block_list_head;
633                 while (next_gpe_block->next) {
634                         next_gpe_block = next_gpe_block->next;
635                 }
636
637                 next_gpe_block->next = gpe_block;
638                 gpe_block->previous = next_gpe_block;
639         } else {
640                 gpe_xrupt_block->gpe_block_list_head = gpe_block;
641         }
642
643         gpe_block->xrupt_block = gpe_xrupt_block;
644         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
645
646       unlock_and_exit:
647         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
648         return_ACPI_STATUS(status);
649 }
650
651 /*******************************************************************************
652  *
653  * FUNCTION:    acpi_ev_delete_gpe_block
654  *
655  * PARAMETERS:  gpe_block       - Existing GPE block
656  *
657  * RETURN:      Status
658  *
659  * DESCRIPTION: Remove a GPE block
660  *
661  ******************************************************************************/
662
663 acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block)
664 {
665         acpi_status status;
666         u32 flags;
667
668         ACPI_FUNCTION_TRACE("ev_install_gpe_block");
669
670         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
671         if (ACPI_FAILURE(status)) {
672                 return_ACPI_STATUS(status);
673         }
674
675         /* Disable all GPEs in this block */
676
677         status = acpi_hw_disable_gpe_block(gpe_block->xrupt_block, gpe_block);
678
679         if (!gpe_block->previous && !gpe_block->next) {
680                 /* This is the last gpe_block on this interrupt */
681
682                 status = acpi_ev_delete_gpe_xrupt(gpe_block->xrupt_block);
683                 if (ACPI_FAILURE(status)) {
684                         goto unlock_and_exit;
685                 }
686         } else {
687                 /* Remove the block on this interrupt with lock */
688
689                 flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
690                 if (gpe_block->previous) {
691                         gpe_block->previous->next = gpe_block->next;
692                 } else {
693                         gpe_block->xrupt_block->gpe_block_list_head =
694                             gpe_block->next;
695                 }
696
697                 if (gpe_block->next) {
698                         gpe_block->next->previous = gpe_block->previous;
699                 }
700                 acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
701         }
702
703         /* Free the gpe_block */
704
705         ACPI_MEM_FREE(gpe_block->register_info);
706         ACPI_MEM_FREE(gpe_block->event_info);
707         ACPI_MEM_FREE(gpe_block);
708
709       unlock_and_exit:
710         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
711         return_ACPI_STATUS(status);
712 }
713
714 /*******************************************************************************
715  *
716  * FUNCTION:    acpi_ev_create_gpe_info_blocks
717  *
718  * PARAMETERS:  gpe_block   - New GPE block
719  *
720  * RETURN:      Status
721  *
722  * DESCRIPTION: Create the register_info and event_info blocks for this GPE block
723  *
724  ******************************************************************************/
725
726 static acpi_status
727 acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
728 {
729         struct acpi_gpe_register_info *gpe_register_info = NULL;
730         struct acpi_gpe_event_info *gpe_event_info = NULL;
731         struct acpi_gpe_event_info *this_event;
732         struct acpi_gpe_register_info *this_register;
733         acpi_native_uint i;
734         acpi_native_uint j;
735         acpi_status status;
736
737         ACPI_FUNCTION_TRACE("ev_create_gpe_info_blocks");
738
739         /* Allocate the GPE register information block */
740
741         gpe_register_info = ACPI_MEM_CALLOCATE((acpi_size) gpe_block->
742                                                register_count *
743                                                sizeof(struct
744                                                       acpi_gpe_register_info));
745         if (!gpe_register_info) {
746                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
747                                   "Could not allocate the gpe_register_info table\n"));
748                 return_ACPI_STATUS(AE_NO_MEMORY);
749         }
750
751         /*
752          * Allocate the GPE event_info block. There are eight distinct GPEs
753          * per register.  Initialization to zeros is sufficient.
754          */
755         gpe_event_info = ACPI_MEM_CALLOCATE(((acpi_size) gpe_block->
756                                              register_count *
757                                              ACPI_GPE_REGISTER_WIDTH) *
758                                             sizeof(struct acpi_gpe_event_info));
759         if (!gpe_event_info) {
760                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
761                                   "Could not allocate the gpe_event_info table\n"));
762                 status = AE_NO_MEMORY;
763                 goto error_exit;
764         }
765
766         /* Save the new Info arrays in the GPE block */
767
768         gpe_block->register_info = gpe_register_info;
769         gpe_block->event_info = gpe_event_info;
770
771         /*
772          * Initialize the GPE Register and Event structures.  A goal of these
773          * tables is to hide the fact that there are two separate GPE register sets
774          * in a given gpe hardware block, the status registers occupy the first half,
775          * and the enable registers occupy the second half.
776          */
777         this_register = gpe_register_info;
778         this_event = gpe_event_info;
779
780         for (i = 0; i < gpe_block->register_count; i++) {
781                 /* Init the register_info for this GPE register (8 GPEs) */
782
783                 this_register->base_gpe_number =
784                     (u8) (gpe_block->block_base_number +
785                           (i * ACPI_GPE_REGISTER_WIDTH));
786
787                 ACPI_STORE_ADDRESS(this_register->status_address.address,
788                                    (gpe_block->block_address.address + i));
789
790                 ACPI_STORE_ADDRESS(this_register->enable_address.address,
791                                    (gpe_block->block_address.address
792                                     + i + gpe_block->register_count));
793
794                 this_register->status_address.address_space_id =
795                     gpe_block->block_address.address_space_id;
796                 this_register->enable_address.address_space_id =
797                     gpe_block->block_address.address_space_id;
798                 this_register->status_address.register_bit_width =
799                     ACPI_GPE_REGISTER_WIDTH;
800                 this_register->enable_address.register_bit_width =
801                     ACPI_GPE_REGISTER_WIDTH;
802                 this_register->status_address.register_bit_offset =
803                     ACPI_GPE_REGISTER_WIDTH;
804                 this_register->enable_address.register_bit_offset =
805                     ACPI_GPE_REGISTER_WIDTH;
806
807                 /* Init the event_info for each GPE within this register */
808
809                 for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
810                         this_event->register_bit = acpi_gbl_decode_to8bit[j];
811                         this_event->register_info = this_register;
812                         this_event++;
813                 }
814
815                 /*
816                  * Clear the status/enable registers.  Note that status registers
817                  * are cleared by writing a '1', while enable registers are cleared
818                  * by writing a '0'.
819                  */
820                 status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0x00,
821                                                  &this_register->
822                                                  enable_address);
823                 if (ACPI_FAILURE(status)) {
824                         goto error_exit;
825                 }
826
827                 status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0xFF,
828                                                  &this_register->
829                                                  status_address);
830                 if (ACPI_FAILURE(status)) {
831                         goto error_exit;
832                 }
833
834                 this_register++;
835         }
836
837         return_ACPI_STATUS(AE_OK);
838
839       error_exit:
840         if (gpe_register_info) {
841                 ACPI_MEM_FREE(gpe_register_info);
842         }
843         if (gpe_event_info) {
844                 ACPI_MEM_FREE(gpe_event_info);
845         }
846
847         return_ACPI_STATUS(status);
848 }
849
850 /*******************************************************************************
851  *
852  * FUNCTION:    acpi_ev_create_gpe_block
853  *
854  * PARAMETERS:  gpe_device          - Handle to the parent GPE block
855  *              gpe_block_address   - Address and space_iD
856  *              register_count      - Number of GPE register pairs in the block
857  *              gpe_block_base_number - Starting GPE number for the block
858  *              interrupt_number    - H/W interrupt for the block
859  *              return_gpe_block    - Where the new block descriptor is returned
860  *
861  * RETURN:      Status
862  *
863  * DESCRIPTION: Create and Install a block of GPE registers
864  *
865  ******************************************************************************/
866
867 acpi_status
868 acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
869                          struct acpi_generic_address *gpe_block_address,
870                          u32 register_count,
871                          u8 gpe_block_base_number,
872                          u32 interrupt_number,
873                          struct acpi_gpe_block_info **return_gpe_block)
874 {
875         struct acpi_gpe_block_info *gpe_block;
876         struct acpi_gpe_event_info *gpe_event_info;
877         acpi_native_uint i;
878         acpi_native_uint j;
879         u32 wake_gpe_count;
880         u32 gpe_enabled_count;
881         acpi_status status;
882         struct acpi_gpe_walk_info gpe_info;
883
884         ACPI_FUNCTION_TRACE("ev_create_gpe_block");
885
886         if (!register_count) {
887                 return_ACPI_STATUS(AE_OK);
888         }
889
890         /* Allocate a new GPE block */
891
892         gpe_block = ACPI_MEM_CALLOCATE(sizeof(struct acpi_gpe_block_info));
893         if (!gpe_block) {
894                 return_ACPI_STATUS(AE_NO_MEMORY);
895         }
896
897         /* Initialize the new GPE block */
898
899         gpe_block->register_count = register_count;
900         gpe_block->block_base_number = gpe_block_base_number;
901         gpe_block->node = gpe_device;
902
903         ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address,
904                     sizeof(struct acpi_generic_address));
905
906         /* Create the register_info and event_info sub-structures */
907
908         status = acpi_ev_create_gpe_info_blocks(gpe_block);
909         if (ACPI_FAILURE(status)) {
910                 ACPI_MEM_FREE(gpe_block);
911                 return_ACPI_STATUS(status);
912         }
913
914         /* Install the new block in the global list(s) */
915
916         status = acpi_ev_install_gpe_block(gpe_block, interrupt_number);
917         if (ACPI_FAILURE(status)) {
918                 ACPI_MEM_FREE(gpe_block);
919                 return_ACPI_STATUS(status);
920         }
921
922         /* Find all GPE methods (_Lxx, _Exx) for this block */
923
924         status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device,
925                                         ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK,
926                                         acpi_ev_save_method_info, gpe_block,
927                                         NULL);
928
929         /*
930          * Runtime option: Should Wake GPEs be enabled at runtime?  The default
931          * is No, they should only be enabled just as the machine goes to sleep.
932          */
933         if (acpi_gbl_leave_wake_gpes_disabled) {
934                 /*
935                  * Differentiate RUNTIME vs WAKE GPEs, via the _PRW control methods.
936                  * (Each GPE that has one or more _PRWs that reference it is by
937                  * definition a WAKE GPE and will not be enabled while the machine
938                  * is running.)
939                  */
940                 gpe_info.gpe_block = gpe_block;
941                 gpe_info.gpe_device = gpe_device;
942
943                 status =
944                     acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
945                                            ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK,
946                                            acpi_ev_match_prw_and_gpe, &gpe_info,
947                                            NULL);
948         }
949
950         /*
951          * Enable all GPEs in this block that are 1) "runtime" or "run/wake" GPEs,
952          * and 2) have a corresponding _Lxx or _Exx method.  All other GPEs must
953          * be enabled via the acpi_enable_gpe() external interface.
954          */
955         wake_gpe_count = 0;
956         gpe_enabled_count = 0;
957
958         for (i = 0; i < gpe_block->register_count; i++) {
959                 for (j = 0; j < 8; j++) {
960                         /* Get the info block for this particular GPE */
961
962                         gpe_event_info =
963                             &gpe_block->
964                             event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j];
965
966                         if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
967                              ACPI_GPE_DISPATCH_METHOD)
968                             && (gpe_event_info->
969                                 flags & ACPI_GPE_TYPE_RUNTIME)) {
970                                 gpe_enabled_count++;
971                         }
972
973                         if (gpe_event_info->flags & ACPI_GPE_TYPE_WAKE) {
974                                 wake_gpe_count++;
975                         }
976                 }
977         }
978
979         /* Dump info about this GPE block */
980
981         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
982                           "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n",
983                           (u32) gpe_block->block_base_number,
984                           (u32) (gpe_block->block_base_number +
985                                  ((gpe_block->register_count *
986                                    ACPI_GPE_REGISTER_WIDTH) - 1)),
987                           gpe_device->name.ascii, gpe_block->register_count,
988                           interrupt_number));
989
990         /* Enable all valid GPEs found above */
991
992         status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block);
993
994         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
995                           "Found %u Wake, Enabled %u Runtime GPEs in this block\n",
996                           wake_gpe_count, gpe_enabled_count));
997
998         /* Return the new block */
999
1000         if (return_gpe_block) {
1001                 (*return_gpe_block) = gpe_block;
1002         }
1003
1004         return_ACPI_STATUS(AE_OK);
1005 }
1006
1007 /*******************************************************************************
1008  *
1009  * FUNCTION:    acpi_ev_gpe_initialize
1010  *
1011  * PARAMETERS:  None
1012  *
1013  * RETURN:      Status
1014  *
1015  * DESCRIPTION: Initialize the GPE data structures
1016  *
1017  ******************************************************************************/
1018
1019 acpi_status acpi_ev_gpe_initialize(void)
1020 {
1021         u32 register_count0 = 0;
1022         u32 register_count1 = 0;
1023         u32 gpe_number_max = 0;
1024         acpi_status status;
1025
1026         ACPI_FUNCTION_TRACE("ev_gpe_initialize");
1027
1028         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
1029         if (ACPI_FAILURE(status)) {
1030                 return_ACPI_STATUS(status);
1031         }
1032
1033         /*
1034          * Initialize the GPE Block(s) defined in the FADT
1035          *
1036          * Why the GPE register block lengths are divided by 2:  From the ACPI Spec,
1037          * section "General-Purpose Event Registers", we have:
1038          *
1039          * "Each register block contains two registers of equal length
1040          *  GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
1041          *  GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
1042          *  The length of the GPE1_STS and GPE1_EN registers is equal to
1043          *  half the GPE1_LEN. If a generic register block is not supported
1044          *  then its respective block pointer and block length values in the
1045          *  FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
1046          *  to be the same size."
1047          */
1048
1049         /*
1050          * Determine the maximum GPE number for this machine.
1051          *
1052          * Note: both GPE0 and GPE1 are optional, and either can exist without
1053          * the other.
1054          *
1055          * If EITHER the register length OR the block address are zero, then that
1056          * particular block is not supported.
1057          */
1058         if (acpi_gbl_FADT->gpe0_blk_len && acpi_gbl_FADT->xgpe0_blk.address) {
1059                 /* GPE block 0 exists (has both length and address > 0) */
1060
1061                 register_count0 = (u16) (acpi_gbl_FADT->gpe0_blk_len / 2);
1062
1063                 gpe_number_max =
1064                     (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
1065
1066                 /* Install GPE Block 0 */
1067
1068                 status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
1069                                                   &acpi_gbl_FADT->xgpe0_blk,
1070                                                   register_count0, 0,
1071                                                   acpi_gbl_FADT->sci_int,
1072                                                   &acpi_gbl_gpe_fadt_blocks[0]);
1073
1074                 if (ACPI_FAILURE(status)) {
1075                         ACPI_REPORT_ERROR(("Could not create GPE Block 0, %s\n",
1076                                            acpi_format_exception(status)));
1077                 }
1078         }
1079
1080         if (acpi_gbl_FADT->gpe1_blk_len && acpi_gbl_FADT->xgpe1_blk.address) {
1081                 /* GPE block 1 exists (has both length and address > 0) */
1082
1083                 register_count1 = (u16) (acpi_gbl_FADT->gpe1_blk_len / 2);
1084
1085                 /* Check for GPE0/GPE1 overlap (if both banks exist) */
1086
1087                 if ((register_count0) &&
1088                     (gpe_number_max >= acpi_gbl_FADT->gpe1_base)) {
1089                         ACPI_REPORT_ERROR(("GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1\n", gpe_number_max, acpi_gbl_FADT->gpe1_base, acpi_gbl_FADT->gpe1_base + ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1)));
1090
1091                         /* Ignore GPE1 block by setting the register count to zero */
1092
1093                         register_count1 = 0;
1094                 } else {
1095                         /* Install GPE Block 1 */
1096
1097                         status =
1098                             acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
1099                                                      &acpi_gbl_FADT->xgpe1_blk,
1100                                                      register_count1,
1101                                                      acpi_gbl_FADT->gpe1_base,
1102                                                      acpi_gbl_FADT->sci_int,
1103                                                      &acpi_gbl_gpe_fadt_blocks
1104                                                      [1]);
1105
1106                         if (ACPI_FAILURE(status)) {
1107                                 ACPI_REPORT_ERROR(("Could not create GPE Block 1, %s\n", acpi_format_exception(status)));
1108                         }
1109
1110                         /*
1111                          * GPE0 and GPE1 do not have to be contiguous in the GPE number
1112                          * space. However, GPE0 always starts at GPE number zero.
1113                          */
1114                         gpe_number_max = acpi_gbl_FADT->gpe1_base +
1115                             ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
1116                 }
1117         }
1118
1119         /* Exit if there are no GPE registers */
1120
1121         if ((register_count0 + register_count1) == 0) {
1122                 /* GPEs are not required by ACPI, this is OK */
1123
1124                 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
1125                                   "There are no GPE blocks defined in the FADT\n"));
1126                 status = AE_OK;
1127                 goto cleanup;
1128         }
1129
1130         /* Check for Max GPE number out-of-range */
1131
1132         if (gpe_number_max > ACPI_GPE_MAX) {
1133                 ACPI_REPORT_ERROR(("Maximum GPE number from FADT is too large: 0x%X\n", gpe_number_max));
1134                 status = AE_BAD_VALUE;
1135                 goto cleanup;
1136         }
1137
1138       cleanup:
1139         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
1140         return_ACPI_STATUS(AE_OK);
1141 }