git.oblomov.eu Git - linux-2.6/blob - drivers/net/irda/nsc-ircc.c

   1 /*********************************************************************
   2  *
   3  * Filename:      nsc-ircc.c
   4  * Version:       1.0
   5  * Description:   Driver for the NSC PC'108 and PC'338 IrDA chipsets
   6  * Status:        Stable.
   7  * Author:        Dag Brattli <dagb@cs.uit.no>
   8  * Created at:    Sat Nov  7 21:43:15 1998
   9  * Modified at:   Wed Mar  1 11:29:34 2000
  10  * Modified by:   Dag Brattli <dagb@cs.uit.no>
  11  *
  12  *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
  13  *     Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
  14  *     Copyright (c) 1998 Actisys Corp., www.actisys.com
  15  *     Copyright (c) 2000-2004 Jean Tourrilhes <jt@hpl.hp.com>
  16  *     All Rights Reserved
  17  *
  18  *     This program is free software; you can redistribute it and/or
  19  *     modify it under the terms of the GNU General Public License as
  20  *     published by the Free Software Foundation; either version 2 of
  21  *     the License, or (at your option) any later version.
  22  *
  23  *     Neither Dag Brattli nor University of Tromsø admit liability nor
  24  *     provide warranty for any of this software. This material is
  25  *     provided "AS-IS" and at no charge.
  26  *
  27  *     Notice that all functions that needs to access the chip in _any_
  28  *     way, must save BSR register on entry, and restore it on exit.
  29  *     It is _very_ important to follow this policy!
  30  *
  31  *         __u8 bank;
  32  *
  33  *         bank = inb(iobase+BSR);
  34  *
  35  *         do_your_stuff_here();
  36  *
  37  *         outb(bank, iobase+BSR);
  38  *
  39  *    If you find bugs in this file, its very likely that the same bug
  40  *    will also be in w83977af_ir.c since the implementations are quite
  41  *    similar.
  42  *
  43  ********************************************************************/
  44
  45 #include <linux/module.h>
  46
  47 #include <linux/kernel.h>
  48 #include <linux/types.h>
  49 #include <linux/skbuff.h>
  50 #include <linux/netdevice.h>
  51 #include <linux/ioport.h>
  52 #include <linux/delay.h>
  53 #include <linux/slab.h>
  54 #include <linux/init.h>
  55 #include <linux/rtnetlink.h>
  56 #include <linux/dma-mapping.h>
  57 #include <linux/pnp.h>
  58 #include <linux/platform_device.h>
  59
  60 #include <asm/io.h>
  61 #include <asm/dma.h>
  62 #include <asm/byteorder.h>
  63
  64 #include <net/irda/wrapper.h>
  65 #include <net/irda/irda.h>
  66 #include <net/irda/irda_device.h>
  67
  68 #include "nsc-ircc.h"
  69
  70 #define CHIP_IO_EXTENT 8
  71 #define BROKEN_DONGLE_ID
  72
  73 static char *driver_name = "nsc-ircc";
  74
  75 /* Power Management */
  76 #define NSC_IRCC_DRIVER_NAME                  "nsc-ircc"
  77 static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
  78 static int nsc_ircc_resume(struct platform_device *dev);
  79
  80 static struct platform_driver nsc_ircc_driver = {
  81         .suspend        = nsc_ircc_suspend,
  82         .resume         = nsc_ircc_resume,
  83         .driver         = {
  84                 .name   = NSC_IRCC_DRIVER_NAME,
  85         },
  86 };
  87
  88 /* Module parameters */
  89 static int qos_mtt_bits = 0x07;  /* 1 ms or more */
  90 static int dongle_id;
  91
  92 /* Use BIOS settions by default, but user may supply module parameters */
  93 static unsigned int io[]  = { ~0, ~0, ~0, ~0, ~0 };
  94 static unsigned int irq[] = {  0,  0,  0,  0,  0 };
  95 static unsigned int dma[] = {  0,  0,  0,  0,  0 };
  96
  97 static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info);
  98 static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info);
  99 static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info);
 100 static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info);
 101 static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info);
 102 static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info);
 103 static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id);
 104
 105 /* These are the known NSC chips */
 106 static nsc_chip_t chips[] = {
 107 /*  Name, {cfg registers}, chip id index reg, chip id expected value, revision mask */
 108         { "PC87108", { 0x150, 0x398, 0xea }, 0x05, 0x10, 0xf0,
 109           nsc_ircc_probe_108, nsc_ircc_init_108 },
 110         { "PC87338", { 0x398, 0x15c, 0x2e }, 0x08, 0xb0, 0xf8,
 111           nsc_ircc_probe_338, nsc_ircc_init_338 },
 112         /* Contributed by Steffen Pingel - IBM X40 */
 113         { "PC8738x", { 0x164e, 0x4e, 0x2e }, 0x20, 0xf4, 0xff,
 114           nsc_ircc_probe_39x, nsc_ircc_init_39x },
 115         /* Contributed by Jan Frey - IBM A30/A31 */
 116         { "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff,
 117           nsc_ircc_probe_39x, nsc_ircc_init_39x },
 118         /* IBM ThinkPads using PC8738x (T60/X60/Z60) */
 119         { "IBM-PC8738x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff,
 120           nsc_ircc_probe_39x, nsc_ircc_init_39x },
 121         /* IBM ThinkPads using PC8394T (T43/R52/?) */
 122         { "IBM-PC8394T", { 0x2e, 0x4e, 0x0 }, 0x20, 0xf9, 0xff,
 123           nsc_ircc_probe_39x, nsc_ircc_init_39x },
 124         { NULL }
 125 };
 126
 127 static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL, NULL };
 128
 129 static char *dongle_types[] = {
 130         "Differential serial interface",
 131         "Differential serial interface",
 132         "Reserved",
 133         "Reserved",
 134         "Sharp RY5HD01",
 135         "Reserved",
 136         "Single-ended serial interface",
 137         "Consumer-IR only",
 138         "HP HSDL-2300, HP HSDL-3600/HSDL-3610",
 139         "IBM31T1100 or Temic TFDS6000/TFDS6500",
 140         "Reserved",
 141         "Reserved",
 142         "HP HSDL-1100/HSDL-2100",
 143         "HP HSDL-1100/HSDL-2100",
 144         "Supports SIR Mode only",
 145         "No dongle connected",
 146 };
 147
 148 /* PNP probing */
 149 static chipio_t pnp_info;
 150 static const struct pnp_device_id nsc_ircc_pnp_table[] = {
 151         { .id = "NSC6001", .driver_data = 0 },
 152         { .id = "IBM0071", .driver_data = 0 },
 153         { }
 154 };
 155
 156 MODULE_DEVICE_TABLE(pnp, nsc_ircc_pnp_table);
 157
 158 static struct pnp_driver nsc_ircc_pnp_driver = {
 159         .name = "nsc-ircc",
 160         .id_table = nsc_ircc_pnp_table,
 161         .probe = nsc_ircc_pnp_probe,
 162 };
 163
 164 /* Some prototypes */
 165 static int  nsc_ircc_open(chipio_t *info);
 166 static int  nsc_ircc_close(struct nsc_ircc_cb *self);
 167 static int  nsc_ircc_setup(chipio_t *info);
 168 static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self);
 169 static int  nsc_ircc_dma_receive(struct nsc_ircc_cb *self);
 170 static int  nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase);
 171 static int  nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
 172 static int  nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
 173 static int  nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
 174 static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase);
 175 static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 baud);
 176 static int  nsc_ircc_is_receiving(struct nsc_ircc_cb *self);
 177 static int  nsc_ircc_read_dongle_id (int iobase);
 178 static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id);
 179
 180 static int  nsc_ircc_net_open(struct net_device *dev);
 181 static int  nsc_ircc_net_close(struct net_device *dev);
 182 static int  nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 183 static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev);
 184
 185 /* Globals */
 186 static int pnp_registered;
 187 static int pnp_succeeded;
 188
 189 /*
 190  * Function nsc_ircc_init ()
 191  *
 192  *    Initialize chip. Just try to find out how many chips we are dealing with
 193  *    and where they are
 194  */
 195 static int __init nsc_ircc_init(void)
 196 {
 197         chipio_t info;
 198         nsc_chip_t *chip;
 199         int ret;
 200         int cfg_base;
 201         int cfg, id;
 202         int reg;
 203         int i = 0;
 204
 205         ret = platform_driver_register(&nsc_ircc_driver);
 206         if (ret) {
 207                 IRDA_ERROR("%s, Can't register driver!\n", driver_name);
 208                 return ret;
 209         }
 210
 211         /* Register with PnP subsystem to detect disable ports */
 212         ret = pnp_register_driver(&nsc_ircc_pnp_driver);
 213
 214         if (!ret)
 215                 pnp_registered = 1;
 216
 217         ret = -ENODEV;
 218
 219         /* Probe for all the NSC chipsets we know about */
 220         for (chip = chips; chip->name ; chip++) {
 221                 IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
 222                            chip->name);
 223
 224                 /* Try all config registers for this chip */
 225                 for (cfg = 0; cfg < ARRAY_SIZE(chip->cfg); cfg++) {
 226                         cfg_base = chip->cfg[cfg];
 227                         if (!cfg_base)
 228                                 continue;
 229
 230                         /* Read index register */
 231                         reg = inb(cfg_base);
 232                         if (reg == 0xff) {
 233                                 IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base);
 234                                 continue;
 235                         }
 236
 237                         /* Read chip identification register */
 238                         outb(chip->cid_index, cfg_base);
 239                         id = inb(cfg_base+1);
 240                         if ((id & chip->cid_mask) == chip->cid_value) {
 241                                 IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
 242                                            __FUNCTION__, chip->name, id & ~chip->cid_mask);
 243
 244                                 /*
 245                                  * If we found a correct PnP setting,
 246                                  * we first try it.
 247                                  */
 248                                 if (pnp_succeeded) {
 249                                         memset(&info, 0, sizeof(chipio_t));
 250                                         info.cfg_base = cfg_base;
 251                                         info.fir_base = pnp_info.fir_base;
 252                                         info.dma = pnp_info.dma;
 253                                         info.irq = pnp_info.irq;
 254
 255                                         if (info.fir_base < 0x2000) {
 256                                                 IRDA_MESSAGE("%s, chip->init\n", driver_name);
 257                                                 chip->init(chip, &info);
 258                                         } else
 259                                                 chip->probe(chip, &info);
 260
 261                                         if (nsc_ircc_open(&info) >= 0)
 262                                                 ret = 0;
 263                                 }
 264
 265                                 /*
 266                                  * Opening based on PnP values failed.
 267                                  * Let's fallback to user values, or probe
 268                                  * the chip.
 269                                  */
 270                                 if (ret) {
 271                                         IRDA_DEBUG(2, "%s, PnP init failed\n", driver_name);
 272                                         memset(&info, 0, sizeof(chipio_t));
 273                                         info.cfg_base = cfg_base;
 274                                         info.fir_base = io[i];
 275                                         info.dma = dma[i];
 276                                         info.irq = irq[i];
 277
 278                                         /*
 279                                          * If the user supplies the base address, then
 280                                          * we init the chip, if not we probe the values
 281                                          * set by the BIOS
 282                                          */
 283                                         if (io[i] < 0x2000) {
 284                                                 chip->init(chip, &info);
 285                                         } else
 286                                                 chip->probe(chip, &info);
 287
 288                                         if (nsc_ircc_open(&info) >= 0)
 289                                                 ret = 0;
 290                                 }
 291                                 i++;
 292                         } else {
 293                                 IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
 294                         }
 295                 }
 296         }
 297
 298         if (ret) {
 299                 platform_driver_unregister(&nsc_ircc_driver);
 300                 pnp_unregister_driver(&nsc_ircc_pnp_driver);
 301                 pnp_registered = 0;
 302         }
 303
 304         return ret;
 305 }
 306
 307 /*
 308  * Function nsc_ircc_cleanup ()
 309  *
 310  *    Close all configured chips
 311  *
 312  */
 313 static void __exit nsc_ircc_cleanup(void)
 314 {
 315         int i;
 316
 317         for (i = 0; i < ARRAY_SIZE(dev_self); i++) {
 318                 if (dev_self[i])
 319                         nsc_ircc_close(dev_self[i]);
 320         }
 321
 322         platform_driver_unregister(&nsc_ircc_driver);
 323
 324         if (pnp_registered)
 325                 pnp_unregister_driver(&nsc_ircc_pnp_driver);
 326
 327         pnp_registered = 0;
 328 }
 329
 330 /*
 331  * Function nsc_ircc_open (iobase, irq)
 332  *
 333  *    Open driver instance
 334  *
 335  */
 336 static int __init nsc_ircc_open(chipio_t *info)
 337 {
 338         struct net_device *dev;
 339         struct nsc_ircc_cb *self;
 340         void *ret;
 341         int err, chip_index;
 342
 343         IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
 344
 345
 346         for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
 347                 if (!dev_self[chip_index])
 348                         break;
 349         }
 350
 351         if (chip_index == ARRAY_SIZE(dev_self)) {
 352                 IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__);
 353                 return -ENOMEM;
 354         }
 355
 356         IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
 357                      info->cfg_base);
 358
 359         if ((nsc_ircc_setup(info)) == -1)
 360                 return -1;
 361
 362         IRDA_MESSAGE("%s, driver loaded (Dag Brattli)\n", driver_name);
 363
 364         dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
 365         if (dev == NULL) {
 366                 IRDA_ERROR("%s(), can't allocate memory for "
 367                            "control block!\n", __FUNCTION__);
 368                 return -ENOMEM;
 369         }
 370
 371         self = dev->priv;
 372         self->netdev = dev;
 373         spin_lock_init(&self->lock);
 374
 375         /* Need to store self somewhere */
 376         dev_self[chip_index] = self;
 377         self->index = chip_index;
 378
 379         /* Initialize IO */
 380         self->io.cfg_base  = info->cfg_base;
 381         self->io.fir_base  = info->fir_base;
 382         self->io.irq       = info->irq;
 383         self->io.fir_ext   = CHIP_IO_EXTENT;
 384         self->io.dma       = info->dma;
 385         self->io.fifo_size = 32;
 386
 387         /* Reserve the ioports that we need */
 388         ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
 389         if (!ret) {
 390                 IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
 391                              __FUNCTION__, self->io.fir_base);
 392                 err = -ENODEV;
 393                 goto out1;
 394         }
 395
 396         /* Initialize QoS for this device */
 397         irda_init_max_qos_capabilies(&self->qos);
 398
 399         /* The only value we must override it the baudrate */
 400         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
 401                 IR_115200|IR_576000|IR_1152000 |(IR_4000000 << 8);
 402
 403         self->qos.min_turn_time.bits = qos_mtt_bits;
 404         irda_qos_bits_to_value(&self->qos);
 405
 406         /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
 407         self->rx_buff.truesize = 14384;
 408         self->tx_buff.truesize = 14384;
 409
 410         /* Allocate memory if needed */
 411         self->rx_buff.head =
 412                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
 413                                    &self->rx_buff_dma, GFP_KERNEL);
 414         if (self->rx_buff.head == NULL) {
 415                 err = -ENOMEM;
 416                 goto out2;
 417
 418         }
 419         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
 420
 421         self->tx_buff.head =
 422                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
 423                                    &self->tx_buff_dma, GFP_KERNEL);
 424         if (self->tx_buff.head == NULL) {
 425                 err = -ENOMEM;
 426                 goto out3;
 427         }
 428         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
 429
 430         self->rx_buff.in_frame = FALSE;
 431         self->rx_buff.state = OUTSIDE_FRAME;
 432         self->tx_buff.data = self->tx_buff.head;
 433         self->rx_buff.data = self->rx_buff.head;
 434
 435         /* Reset Tx queue info */
 436         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
 437         self->tx_fifo.tail = self->tx_buff.head;
 438
 439         /* Override the network functions we need to use */
 440         dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
 441         dev->open            = nsc_ircc_net_open;
 442         dev->stop            = nsc_ircc_net_close;
 443         dev->do_ioctl        = nsc_ircc_net_ioctl;
 444         dev->get_stats       = nsc_ircc_net_get_stats;
 445
 446         err = register_netdev(dev);
 447         if (err) {
 448                 IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
 449                 goto out4;
 450         }
 451         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
 452
 453         /* Check if user has supplied a valid dongle id or not */
 454         if ((dongle_id <= 0) ||
 455             (dongle_id >= ARRAY_SIZE(dongle_types))) {
 456                 dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base);
 457
 458                 IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name,
 459                              dongle_types[dongle_id]);
 460         } else {
 461                 IRDA_MESSAGE("%s, Using dongle: %s\n", driver_name,
 462                              dongle_types[dongle_id]);
 463         }
 464
 465         self->io.dongle_id = dongle_id;
 466         nsc_ircc_init_dongle_interface(self->io.fir_base, dongle_id);
 467
 468         self->pldev = platform_device_register_simple(NSC_IRCC_DRIVER_NAME,
 469                                                       self->index, NULL, 0);
 470         if (IS_ERR(self->pldev)) {
 471                 err = PTR_ERR(self->pldev);
 472                 goto out5;
 473         }
 474         platform_set_drvdata(self->pldev, self);
 475
 476         return chip_index;
 477
 478  out5:
 479         unregister_netdev(dev);
 480  out4:
 481         dma_free_coherent(NULL, self->tx_buff.truesize,
 482                           self->tx_buff.head, self->tx_buff_dma);
 483  out3:
 484         dma_free_coherent(NULL, self->rx_buff.truesize,
 485                           self->rx_buff.head, self->rx_buff_dma);
 486  out2:
 487         release_region(self->io.fir_base, self->io.fir_ext);
 488  out1:
 489         free_netdev(dev);
 490         dev_self[chip_index] = NULL;
 491         return err;
 492 }
 493
 494 /*
 495  * Function nsc_ircc_close (self)
 496  *
 497  *    Close driver instance
 498  *
 499  */
 500 static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 501 {
 502         int iobase;
 503
 504         IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
 505
 506         IRDA_ASSERT(self != NULL, return -1;);
 507
 508         iobase = self->io.fir_base;
 509
 510         platform_device_unregister(self->pldev);
 511
 512         /* Remove netdevice */
 513         unregister_netdev(self->netdev);
 514
 515         /* Release the PORT that this driver is using */
 516         IRDA_DEBUG(4, "%s(), Releasing Region %03x\n",
 517                    __FUNCTION__, self->io.fir_base);
 518         release_region(self->io.fir_base, self->io.fir_ext);
 519
 520         if (self->tx_buff.head)
 521                 dma_free_coherent(NULL, self->tx_buff.truesize,
 522                                   self->tx_buff.head, self->tx_buff_dma);
 523
 524         if (self->rx_buff.head)
 525                 dma_free_coherent(NULL, self->rx_buff.truesize,
 526                                   self->rx_buff.head, self->rx_buff_dma);
 527
 528         dev_self[self->index] = NULL;
 529         free_netdev(self->netdev);
 530
 531         return 0;
 532 }
 533
 534 /*
 535  * Function nsc_ircc_init_108 (iobase, cfg_base, irq, dma)
 536  *
 537  *    Initialize the NSC '108 chip
 538  *
 539  */
 540 static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 541 {
 542         int cfg_base = info->cfg_base;
 543         __u8 temp=0;
 544
 545         outb(2, cfg_base);      /* Mode Control Register (MCTL) */
 546         outb(0x00, cfg_base+1); /* Disable device */
 547
 548         /* Base Address and Interrupt Control Register (BAIC) */
 549         outb(CFG_108_BAIC, cfg_base);
 550         switch (info->fir_base) {
 551         case 0x3e8: outb(0x14, cfg_base+1); break;
 552         case 0x2e8: outb(0x15, cfg_base+1); break;
 553         case 0x3f8: outb(0x16, cfg_base+1); break;
 554         case 0x2f8: outb(0x17, cfg_base+1); break;
 555         default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__);
 556         }
 557
 558         /* Control Signal Routing Register (CSRT) */
 559         switch (info->irq) {
 560         case 3:  temp = 0x01; break;
 561         case 4:  temp = 0x02; break;
 562         case 5:  temp = 0x03; break;
 563         case 7:  temp = 0x04; break;
 564         case 9:  temp = 0x05; break;
 565         case 11: temp = 0x06; break;
 566         case 15: temp = 0x07; break;
 567         default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__);
 568         }
 569         outb(CFG_108_CSRT, cfg_base);
 570
 571         switch (info->dma) {
 572         case 0: outb(0x08+temp, cfg_base+1); break;
 573         case 1: outb(0x10+temp, cfg_base+1); break;
 574         case 3: outb(0x18+temp, cfg_base+1); break;
 575         default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__);
 576         }
 577
 578         outb(CFG_108_MCTL, cfg_base);      /* Mode Control Register (MCTL) */
 579         outb(0x03, cfg_base+1); /* Enable device */
 580
 581         return 0;
 582 }
 583
 584 /*
 585  * Function nsc_ircc_probe_108 (chip, info)
 586  *
 587  *
 588  *
 589  */
 590 static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 591 {
 592         int cfg_base = info->cfg_base;
 593         int reg;
 594
 595         /* Read address and interrupt control register (BAIC) */
 596         outb(CFG_108_BAIC, cfg_base);
 597         reg = inb(cfg_base+1);
 598
 599         switch (reg & 0x03) {
 600         case 0:
 601                 info->fir_base = 0x3e8;
 602                 break;
 603         case 1:
 604                 info->fir_base = 0x2e8;
 605                 break;
 606         case 2:
 607                 info->fir_base = 0x3f8;
 608                 break;
 609         case 3:
 610                 info->fir_base = 0x2f8;
 611                 break;
 612         }
 613         info->sir_base = info->fir_base;
 614         IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
 615                    info->fir_base);
 616
 617         /* Read control signals routing register (CSRT) */
 618         outb(CFG_108_CSRT, cfg_base);
 619         reg = inb(cfg_base+1);
 620
 621         switch (reg & 0x07) {
 622         case 0:
 623                 info->irq = -1;
 624                 break;
 625         case 1:
 626                 info->irq = 3;
 627                 break;
 628         case 2:
 629                 info->irq = 4;
 630                 break;
 631         case 3:
 632                 info->irq = 5;
 633                 break;
 634         case 4:
 635                 info->irq = 7;
 636                 break;
 637         case 5:
 638                 info->irq = 9;
 639                 break;
 640         case 6:
 641                 info->irq = 11;
 642                 break;
 643         case 7:
 644                 info->irq = 15;
 645                 break;
 646         }
 647         IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
 648
 649         /* Currently we only read Rx DMA but it will also be used for Tx */
 650         switch ((reg >> 3) & 0x03) {
 651         case 0:
 652                 info->dma = -1;
 653                 break;
 654         case 1:
 655                 info->dma = 0;
 656                 break;
 657         case 2:
 658                 info->dma = 1;
 659                 break;
 660         case 3:
 661                 info->dma = 3;
 662                 break;
 663         }
 664         IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
 665
 666         /* Read mode control register (MCTL) */
 667         outb(CFG_108_MCTL, cfg_base);
 668         reg = inb(cfg_base+1);
 669
 670         info->enabled = reg & 0x01;
 671         info->suspended = !((reg >> 1) & 0x01);
 672
 673         return 0;
 674 }
 675
 676 /*
 677  * Function nsc_ircc_init_338 (chip, info)
 678  *
 679  *    Initialize the NSC '338 chip. Remember that the 87338 needs two
 680  *    consecutive writes to the data registers while CPU interrupts are
 681  *    disabled. The 97338 does not require this, but shouldn't be any
 682  *    harm if we do it anyway.
 683  */
 684 static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info)
 685 {
 686         /* No init yet */
 687
 688         return 0;
 689 }
 690
 691 /*
 692  * Function nsc_ircc_probe_338 (chip, info)
 693  *
 694  *
 695  *
 696  */
 697 static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
 698 {
 699         int cfg_base = info->cfg_base;
 700         int reg, com = 0;
 701         int pnp;
 702
 703         /* Read funtion enable register (FER) */
 704         outb(CFG_338_FER, cfg_base);
 705         reg = inb(cfg_base+1);
 706
 707         info->enabled = (reg >> 2) & 0x01;
 708
 709         /* Check if we are in Legacy or PnP mode */
 710         outb(CFG_338_PNP0, cfg_base);
 711         reg = inb(cfg_base+1);
 712
 713         pnp = (reg >> 3) & 0x01;
 714         if (pnp) {
 715                 IRDA_DEBUG(2, "(), Chip is in PnP mode\n");
 716                 outb(0x46, cfg_base);
 717                 reg = (inb(cfg_base+1) & 0xfe) << 2;
 718
 719                 outb(0x47, cfg_base);
 720                 reg |= ((inb(cfg_base+1) & 0xfc) << 8);
 721
 722                 info->fir_base = reg;
 723         } else {
 724                 /* Read function address register (FAR) */
 725                 outb(CFG_338_FAR, cfg_base);
 726                 reg = inb(cfg_base+1);
 727
 728                 switch ((reg >> 4) & 0x03) {
 729                 case 0:
 730                         info->fir_base = 0x3f8;
 731                         break;
 732                 case 1:
 733                         info->fir_base = 0x2f8;
 734                         break;
 735                 case 2:
 736                         com = 3;
 737                         break;
 738                 case 3:
 739                         com = 4;
 740                         break;
 741                 }
 742
 743                 if (com) {
 744                         switch ((reg >> 6) & 0x03) {
 745                         case 0:
 746                                 if (com == 3)
 747                                         info->fir_base = 0x3e8;
 748                                 else
 749                                         info->fir_base = 0x2e8;
 750                                 break;
 751                         case 1:
 752                                 if (com == 3)
 753                                         info->fir_base = 0x338;
 754                                 else
 755                                         info->fir_base = 0x238;
 756                                 break;
 757                         case 2:
 758                                 if (com == 3)
 759                                         info->fir_base = 0x2e8;
 760                                 else
 761                                         info->fir_base = 0x2e0;
 762                                 break;
 763                         case 3:
 764                                 if (com == 3)
 765                                         info->fir_base = 0x220;
 766                                 else
 767                                         info->fir_base = 0x228;
 768                                 break;
 769                         }
 770                 }
 771         }
 772         info->sir_base = info->fir_base;
 773
 774         /* Read PnP register 1 (PNP1) */
 775         outb(CFG_338_PNP1, cfg_base);
 776         reg = inb(cfg_base+1);
 777
 778         info->irq = reg >> 4;
 779
 780         /* Read PnP register 3 (PNP3) */
 781         outb(CFG_338_PNP3, cfg_base);
 782         reg = inb(cfg_base+1);
 783
 784         info->dma = (reg & 0x07) - 1;
 785
 786         /* Read power and test register (PTR) */
 787         outb(CFG_338_PTR, cfg_base);
 788         reg = inb(cfg_base+1);
 789
 790         info->suspended = reg & 0x01;
 791
 792         return 0;
 793 }
 794
 795
 796 /*
 797  * Function nsc_ircc_init_39x (chip, info)
 798  *
 799  *    Now that we know it's a '39x (see probe below), we need to
 800  *    configure it so we can use it.
 801  *
 802  * The NSC '338 chip is a Super I/O chip with a "bank" architecture,
 803  * the configuration of the different functionality (serial, parallel,
 804  * floppy...) are each in a different bank (Logical Device Number).
 805  * The base address, irq and dma configuration registers are common
 806  * to all functionalities (index 0x30 to 0x7F).
 807  * There is only one configuration register specific to the
 808  * serial port, CFG_39X_SPC.
 809  * JeanII
 810  *
 811  * Note : this code was written by Jan Frey <janfrey@web.de>
 812  */
 813 static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
 814 {
 815         int cfg_base = info->cfg_base;
 816         int enabled;
 817
 818         /* User is sure about his config... accept it. */
 819         IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
 820                    "io=0x%04x, irq=%d, dma=%d\n",
 821                    __FUNCTION__, info->fir_base, info->irq, info->dma);
 822
 823         /* Access bank for SP2 */
 824         outb(CFG_39X_LDN, cfg_base);
 825         outb(0x02, cfg_base+1);
 826
 827         /* Configure SP2 */
 828
 829         /* We want to enable the device if not enabled */
 830         outb(CFG_39X_ACT, cfg_base);
 831         enabled = inb(cfg_base+1) & 0x01;
 832
 833         if (!enabled) {
 834                 /* Enable the device */
 835                 outb(CFG_39X_SIOCF1, cfg_base);
 836                 outb(0x01, cfg_base+1);
 837                 /* May want to update info->enabled. Jean II */
 838         }
 839
 840         /* Enable UART bank switching (bit 7) ; Sets the chip to normal
 841          * power mode (wake up from sleep mode) (bit 1) */
 842         outb(CFG_39X_SPC, cfg_base);
 843         outb(0x82, cfg_base+1);
 844
 845         return 0;
 846 }
 847
 848 /*
 849  * Function nsc_ircc_probe_39x (chip, info)
 850  *
 851  *    Test if we really have a '39x chip at the given address
 852  *
 853  * Note : this code was written by Jan Frey <janfrey@web.de>
 854  */
 855 static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
 856 {
 857         int cfg_base = info->cfg_base;
 858         int reg1, reg2, irq, irqt, dma1, dma2;
 859         int enabled, susp;
 860
 861         IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
 862                    __FUNCTION__, cfg_base);
 863
 864         /* This function should be executed with irq off to avoid
 865          * another driver messing with the Super I/O bank - Jean II */
 866
 867         /* Access bank for SP2 */
 868         outb(CFG_39X_LDN, cfg_base);
 869         outb(0x02, cfg_base+1);
 870
 871         /* Read infos about SP2 ; store in info struct */
 872         outb(CFG_39X_BASEH, cfg_base);
 873         reg1 = inb(cfg_base+1);
 874         outb(CFG_39X_BASEL, cfg_base);
 875         reg2 = inb(cfg_base+1);
 876         info->fir_base = (reg1 << 8) | reg2;
 877
 878         outb(CFG_39X_IRQNUM, cfg_base);
 879         irq = inb(cfg_base+1);
 880         outb(CFG_39X_IRQSEL, cfg_base);
 881         irqt = inb(cfg_base+1);
 882         info->irq = irq;
 883
 884         outb(CFG_39X_DMA0, cfg_base);
 885         dma1 = inb(cfg_base+1);
 886         outb(CFG_39X_DMA1, cfg_base);
 887         dma2 = inb(cfg_base+1);
 888         info->dma = dma1 -1;
 889
 890         outb(CFG_39X_ACT, cfg_base);
 891         info->enabled = enabled = inb(cfg_base+1) & 0x01;
 892
 893         outb(CFG_39X_SPC, cfg_base);
 894         susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
 895
 896         IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
 897
 898         /* Configure SP2 */
 899
 900         /* We want to enable the device if not enabled */
 901         outb(CFG_39X_ACT, cfg_base);
 902         enabled = inb(cfg_base+1) & 0x01;
 903
 904         if (!enabled) {
 905                 /* Enable the device */
 906                 outb(CFG_39X_SIOCF1, cfg_base);
 907                 outb(0x01, cfg_base+1);
 908                 /* May want to update info->enabled. Jean II */
 909         }
 910
 911         /* Enable UART bank switching (bit 7) ; Sets the chip to normal
 912          * power mode (wake up from sleep mode) (bit 1) */
 913         outb(CFG_39X_SPC, cfg_base);
 914         outb(0x82, cfg_base+1);
 915
 916         return 0;
 917 }
 918
 919 /* PNP probing */
 920 static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
 921 {
 922         memset(&pnp_info, 0, sizeof(chipio_t));
 923         pnp_info.irq = -1;
 924         pnp_info.dma = -1;
 925         pnp_succeeded = 1;
 926
 927         /* There don't seem to be any way to get the cfg_base.
 928          * On my box, cfg_base is in the PnP descriptor of the
 929          * motherboard. Oh well... Jean II */
 930
 931         if (pnp_port_valid(dev, 0) &&
 932                 !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED))
 933                 pnp_info.fir_base = pnp_port_start(dev, 0);
 934
 935         if (pnp_irq_valid(dev, 0) &&
 936                 !(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED))
 937                 pnp_info.irq = pnp_irq(dev, 0);
 938
 939         if (pnp_dma_valid(dev, 0) &&
 940                 !(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED))
 941                 pnp_info.dma = pnp_dma(dev, 0);
 942
 943         IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
 944                    __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
 945
 946         if((pnp_info.fir_base == 0) ||
 947            (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
 948                 /* Returning an error will disable the device. Yuck ! */
 949                 //return -EINVAL;
 950                 pnp_succeeded = 0;
 951         }
 952
 953         return 0;
 954 }
 955
 956 /*
 957  * Function nsc_ircc_setup (info)
 958  *
 959  *    Returns non-negative on success.
 960  *
 961  */
 962 static int nsc_ircc_setup(chipio_t *info)
 963 {
 964         int version;
 965         int iobase = info->fir_base;
 966
 967         /* Read the Module ID */
 968         switch_bank(iobase, BANK3);
 969         version = inb(iobase+MID);
 970
 971         IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
 972                    __FUNCTION__, driver_name, version);
 973
 974         /* Should be 0x2? */
 975         if (0x20 != (version & 0xf0)) {
 976                 IRDA_ERROR("%s, Wrong chip version %02x\n",
 977                            driver_name, version);
 978                 return -1;
 979         }
 980
 981         /* Switch to advanced mode */
 982         switch_bank(iobase, BANK2);
 983         outb(ECR1_EXT_SL, iobase+ECR1);
 984         switch_bank(iobase, BANK0);
 985
 986         /* Set FIFO threshold to TX17, RX16, reset and enable FIFO's */
 987         switch_bank(iobase, BANK0);
 988         outb(FCR_RXTH|FCR_TXTH|FCR_TXSR|FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
 989
 990         outb(0x03, iobase+LCR);         /* 8 bit word length */
 991         outb(MCR_SIR, iobase+MCR);      /* Start at SIR-mode, also clears LSR*/
 992
 993         /* Set FIFO size to 32 */
 994         switch_bank(iobase, BANK2);
 995         outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
 996
 997         /* IRCR2: FEND_MD is not set */
 998         switch_bank(iobase, BANK5);
 999         outb(0x02, iobase+4);
1000
1001         /* Make sure that some defaults are OK */
1002         switch_bank(iobase, BANK6);
1003         outb(0x20, iobase+0); /* Set 32 bits FIR CRC */
1004         outb(0x0a, iobase+1); /* Set MIR pulse width */
1005         outb(0x0d, iobase+2); /* Set SIR pulse width to 1.6us */
1006         outb(0x2a, iobase+4); /* Set beginning frag, and preamble length */
1007
1008         /* Enable receive interrupts */
1009         switch_bank(iobase, BANK0);
1010         outb(IER_RXHDL_IE, iobase+IER);
1011
1012         return 0;
1013 }
1014
1015 /*
1016  * Function nsc_ircc_read_dongle_id (void)
1017  *
1018  * Try to read dongle indentification. This procedure needs to be executed
1019  * once after power-on/reset. It also needs to be used whenever you suspect
1020  * that the user may have plugged/unplugged the IrDA Dongle.
1021  */
1022 static int nsc_ircc_read_dongle_id (int iobase)
1023 {
1024         int dongle_id;
1025         __u8 bank;
1026
1027         bank = inb(iobase+BSR);
1028
1029         /* Select Bank 7 */
1030         switch_bank(iobase, BANK7);
1031
1032         /* IRCFG4: IRSL0_DS and IRSL21_DS are cleared */
1033         outb(0x00, iobase+7);
1034
1035         /* ID0, 1, and 2 are pulled up/down very slowly */
1036         udelay(50);
1037
1038         /* IRCFG1: read the ID bits */
1039         dongle_id = inb(iobase+4) & 0x0f;
1040
1041 #ifdef BROKEN_DONGLE_ID
1042         if (dongle_id == 0x0a)
1043                 dongle_id = 0x09;
1044 #endif
1045         /* Go back to  bank 0 before returning */
1046         switch_bank(iobase, BANK0);
1047
1048         outb(bank, iobase+BSR);
1049
1050         return dongle_id;
1051 }
1052
1053 /*
1054  * Function nsc_ircc_init_dongle_interface (iobase, dongle_id)
1055  *
1056  *     This function initializes the dongle for the transceiver that is
1057  *     used. This procedure needs to be executed once after
1058  *     power-on/reset. It also needs to be used whenever you suspect that
1059  *     the dongle is changed.
1060  */
1061 static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
1062 {
1063         int bank;
1064
1065         /* Save current bank */
1066         bank = inb(iobase+BSR);
1067
1068         /* Select Bank 7 */
1069         switch_bank(iobase, BANK7);
1070
1071         /* IRCFG4: set according to dongle_id */
1072         switch (dongle_id) {
1073         case 0x00: /* same as */
1074         case 0x01: /* Differential serial interface */
1075                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1076                            __FUNCTION__, dongle_types[dongle_id]);
1077                 break;
1078         case 0x02: /* same as */
1079         case 0x03: /* Reserved */
1080                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1081                            __FUNCTION__, dongle_types[dongle_id]);
1082                 break;
1083         case 0x04: /* Sharp RY5HD01 */
1084                 break;
1085         case 0x05: /* Reserved, but this is what the Thinkpad reports */
1086                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1087                            __FUNCTION__, dongle_types[dongle_id]);
1088                 break;
1089         case 0x06: /* Single-ended serial interface */
1090                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1091                            __FUNCTION__, dongle_types[dongle_id]);
1092                 break;
1093         case 0x07: /* Consumer-IR only */
1094                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
1095                            __FUNCTION__, dongle_types[dongle_id]);
1096                 break;
1097         case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
1098                 IRDA_DEBUG(0, "%s(), %s\n",
1099                            __FUNCTION__, dongle_types[dongle_id]);
1100                 break;
1101         case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
1102                 outb(0x28, iobase+7); /* Set irsl[0-2] as output */
1103                 break;
1104         case 0x0A: /* same as */
1105         case 0x0B: /* Reserved */
1106                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1107                            __FUNCTION__, dongle_types[dongle_id]);
1108                 break;
1109         case 0x0C: /* same as */
1110         case 0x0D: /* HP HSDL-1100/HSDL-2100 */
1111                 /*
1112                  * Set irsl0 as input, irsl[1-2] as output, and separate
1113                  * inputs are used for SIR and MIR/FIR
1114                  */
1115                 outb(0x48, iobase+7);
1116                 break;
1117         case 0x0E: /* Supports SIR Mode only */
1118                 outb(0x28, iobase+7); /* Set irsl[0-2] as output */
1119                 break;
1120         case 0x0F: /* No dongle connected */
1121                 IRDA_DEBUG(0, "%s(), %s\n",
1122                            __FUNCTION__, dongle_types[dongle_id]);
1123
1124                 switch_bank(iobase, BANK0);
1125                 outb(0x62, iobase+MCR);
1126                 break;
1127         default:
1128                 IRDA_DEBUG(0, "%s(), invalid dongle_id %#x",
1129                            __FUNCTION__, dongle_id);
1130         }
1131
1132         /* IRCFG1: IRSL1 and 2 are set to IrDA mode */
1133         outb(0x00, iobase+4);
1134
1135         /* Restore bank register */
1136         outb(bank, iobase+BSR);
1137
1138 } /* set_up_dongle_interface */
1139
1140 /*
1141  * Function nsc_ircc_change_dongle_speed (iobase, speed, dongle_id)
1142  *
1143  *    Change speed of the attach dongle
1144  *
1145  */
1146 static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
1147 {
1148         __u8 bank;
1149
1150         /* Save current bank */
1151         bank = inb(iobase+BSR);
1152
1153         /* Select Bank 7 */
1154         switch_bank(iobase, BANK7);
1155
1156         /* IRCFG1: set according to dongle_id */
1157         switch (dongle_id) {
1158         case 0x00: /* same as */
1159         case 0x01: /* Differential serial interface */
1160                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1161                            __FUNCTION__, dongle_types[dongle_id]);
1162                 break;
1163         case 0x02: /* same as */
1164         case 0x03: /* Reserved */
1165                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1166                            __FUNCTION__, dongle_types[dongle_id]);
1167                 break;
1168         case 0x04: /* Sharp RY5HD01 */
1169                 break;
1170         case 0x05: /* Reserved */
1171                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1172                            __FUNCTION__, dongle_types[dongle_id]);
1173                 break;
1174         case 0x06: /* Single-ended serial interface */
1175                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1176                            __FUNCTION__, dongle_types[dongle_id]);
1177                 break;
1178         case 0x07: /* Consumer-IR only */
1179                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
1180                            __FUNCTION__, dongle_types[dongle_id]);
1181                 break;
1182         case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
1183                 IRDA_DEBUG(0, "%s(), %s\n",
1184                            __FUNCTION__, dongle_types[dongle_id]);
1185                 outb(0x00, iobase+4);
1186                 if (speed > 115200)
1187                         outb(0x01, iobase+4);
1188                 break;
1189         case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
1190                 outb(0x01, iobase+4);
1191
1192                 if (speed == 4000000) {
1193                         /* There was a cli() there, but we now are already
1194                          * under spin_lock_irqsave() - JeanII */
1195                         outb(0x81, iobase+4);
1196                         outb(0x80, iobase+4);
1197                 } else
1198                         outb(0x00, iobase+4);
1199                 break;
1200         case 0x0A: /* same as */
1201         case 0x0B: /* Reserved */
1202                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1203                            __FUNCTION__, dongle_types[dongle_id]);
1204                 break;
1205         case 0x0C: /* same as */
1206         case 0x0D: /* HP HSDL-1100/HSDL-2100 */
1207                 break;
1208         case 0x0E: /* Supports SIR Mode only */
1209                 break;
1210         case 0x0F: /* No dongle connected */
1211                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
1212                            __FUNCTION__, dongle_types[dongle_id]);
1213
1214                 switch_bank(iobase, BANK0);
1215                 outb(0x62, iobase+MCR);
1216                 break;
1217         default:
1218                 IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
1219         }
1220         /* Restore bank register */
1221         outb(bank, iobase+BSR);
1222 }
1223
1224 /*
1225  * Function nsc_ircc_change_speed (self, baud)
1226  *
1227  *    Change the speed of the device
1228  *
1229  * This function *must* be called with irq off and spin-lock.
1230  */
1231 static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
1232 {
1233         struct net_device *dev = self->netdev;
1234         __u8 mcr = MCR_SIR;
1235         int iobase;
1236         __u8 bank;
1237         __u8 ier;                  /* Interrupt enable register */
1238
1239         IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);
1240
1241         IRDA_ASSERT(self != NULL, return 0;);
1242
1243         iobase = self->io.fir_base;
1244
1245         /* Update accounting for new speed */
1246         self->io.speed = speed;
1247
1248         /* Save current bank */
1249         bank = inb(iobase+BSR);
1250
1251         /* Disable interrupts */
1252         switch_bank(iobase, BANK0);
1253         outb(0, iobase+IER);
1254
1255         /* Select Bank 2 */
1256         switch_bank(iobase, BANK2);
1257
1258         outb(0x00, iobase+BGDH);
1259         switch (speed) {
1260         case 9600:   outb(0x0c, iobase+BGDL); break;
1261         case 19200:  outb(0x06, iobase+BGDL); break;
1262         case 38400:  outb(0x03, iobase+BGDL); break;
1263         case 57600:  outb(0x02, iobase+BGDL); break;
1264         case 115200: outb(0x01, iobase+BGDL); break;
1265         case 576000:
1266                 switch_bank(iobase, BANK5);
1267
1268                 /* IRCR2: MDRS is set */
1269                 outb(inb(iobase+4) | 0x04, iobase+4);
1270
1271                 mcr = MCR_MIR;
1272                 IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
1273                 break;
1274         case 1152000:
1275                 mcr = MCR_MIR;
1276                 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
1277                 break;
1278         case 4000000:
1279                 mcr = MCR_FIR;
1280                 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
1281                 break;
1282         default:
1283                 mcr = MCR_FIR;
1284                 IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n",
1285                            __FUNCTION__, speed);
1286                 break;
1287         }
1288
1289         /* Set appropriate speed mode */
1290         switch_bank(iobase, BANK0);
1291         outb(mcr | MCR_TX_DFR, iobase+MCR);
1292
1293         /* Give some hits to the transceiver */
1294         nsc_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);
1295
1296         /* Set FIFO threshold to TX17, RX16 */
1297         switch_bank(iobase, BANK0);
1298         outb(0x00, iobase+FCR);
1299         outb(FCR_FIFO_EN, iobase+FCR);
1300         outb(FCR_RXTH|     /* Set Rx FIFO threshold */
1301              FCR_TXTH|     /* Set Tx FIFO threshold */
1302              FCR_TXSR|     /* Reset Tx FIFO */
1303              FCR_RXSR|     /* Reset Rx FIFO */
1304              FCR_FIFO_EN,  /* Enable FIFOs */
1305              iobase+FCR);
1306
1307         /* Set FIFO size to 32 */
1308         switch_bank(iobase, BANK2);
1309         outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
1310
1311         /* Enable some interrupts so we can receive frames */
1312         switch_bank(iobase, BANK0);
1313         if (speed > 115200) {
1314                 /* Install FIR xmit handler */
1315                 dev->hard_start_xmit = nsc_ircc_hard_xmit_fir;
1316                 ier = IER_SFIF_IE;
1317                 nsc_ircc_dma_receive(self);
1318         } else {
1319                 /* Install SIR xmit handler */
1320                 dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
1321                 ier = IER_RXHDL_IE;
1322         }
1323         /* Set our current interrupt mask */
1324         outb(ier, iobase+IER);
1325
1326         /* Restore BSR */
1327         outb(bank, iobase+BSR);
1328
1329         /* Make sure interrupt handlers keep the proper interrupt mask */
1330         return(ier);
1331 }
1332
1333 /*
1334  * Function nsc_ircc_hard_xmit (skb, dev)
1335  *
1336  *    Transmit the frame!
1337  *
1338  */
1339 static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
1340 {
1341         struct nsc_ircc_cb *self;
1342         unsigned long flags;
1343         int iobase;
1344         __s32 speed;
1345         __u8 bank;
1346
1347         self = (struct nsc_ircc_cb *) dev->priv;
1348
1349         IRDA_ASSERT(self != NULL, return 0;);
1350
1351         iobase = self->io.fir_base;
1352
1353         netif_stop_queue(dev);
1354
1355         /* Make sure tests *& speed change are atomic */
1356         spin_lock_irqsave(&self->lock, flags);
1357
1358         /* Check if we need to change the speed */
1359         speed = irda_get_next_speed(skb);
1360         if ((speed != self->io.speed) && (speed != -1)) {
1361                 /* Check for empty frame. */
1362                 if (!skb->len) {
1363                         /* If we just sent a frame, we get called before
1364                          * the last bytes get out (because of the SIR FIFO).
1365                          * If this is the case, let interrupt handler change
1366                          * the speed itself... Jean II */
1367                         if (self->io.direction == IO_RECV) {
1368                                 nsc_ircc_change_speed(self, speed);
1369                                 /* TODO : For SIR->SIR, the next packet
1370                                  * may get corrupted - Jean II */
1371                                 netif_wake_queue(dev);
1372                         } else {
1373                                 self->new_speed = speed;
1374                                 /* Queue will be restarted after speed change
1375                                  * to make sure packets gets through the
1376                                  * proper xmit handler - Jean II */
1377                         }
1378                         dev->trans_start = jiffies;
1379                         spin_unlock_irqrestore(&self->lock, flags);
1380                         dev_kfree_skb(skb);
1381                         return 0;
1382                 } else
1383                         self->new_speed = speed;
1384         }
1385
1386         /* Save current bank */
1387         bank = inb(iobase+BSR);
1388
1389         self->tx_buff.data = self->tx_buff.head;
1390
1391         self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
1392                                            self->tx_buff.truesize);
1393
1394         self->stats.tx_bytes += self->tx_buff.len;
1395
1396         /* Add interrupt on tx low level (will fire immediately) */
1397         switch_bank(iobase, BANK0);
1398         outb(IER_TXLDL_IE, iobase+IER);
1399
1400         /* Restore bank register */
1401         outb(bank, iobase+BSR);
1402
1403         dev->trans_start = jiffies;
1404         spin_unlock_irqrestore(&self->lock, flags);
1405
1406         dev_kfree_skb(skb);
1407
1408         return 0;
1409 }
1410
1411 static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
1412 {
1413         struct nsc_ircc_cb *self;
1414         unsigned long flags;
1415         int iobase;
1416         __s32 speed;
1417         __u8 bank;
1418         int mtt, diff;
1419
1420         self = (struct nsc_ircc_cb *) dev->priv;
1421         iobase = self->io.fir_base;
1422
1423         netif_stop_queue(dev);
1424
1425         /* Make sure tests *& speed change are atomic */
1426         spin_lock_irqsave(&self->lock, flags);
1427
1428         /* Check if we need to change the speed */
1429         speed = irda_get_next_speed(skb);
1430         if ((speed != self->io.speed) && (speed != -1)) {
1431                 /* Check for empty frame. */
1432                 if (!skb->len) {
1433                         /* If we are currently transmitting, defer to
1434                          * interrupt handler. - Jean II */
1435                         if(self->tx_fifo.len == 0) {
1436                                 nsc_ircc_change_speed(self, speed);
1437                                 netif_wake_queue(dev);
1438                         } else {
1439                                 self->new_speed = speed;
1440                                 /* Keep queue stopped :
1441                                  * the speed change operation may change the
1442                                  * xmit handler, and we want to make sure
1443                                  * the next packet get through the proper
1444                                  * Tx path, so block the Tx queue until
1445                                  * the speed change has been done.
1446                                  * Jean II */
1447                         }
1448                         dev->trans_start = jiffies;
1449                         spin_unlock_irqrestore(&self->lock, flags);
1450                         dev_kfree_skb(skb);
1451                         return 0;
1452                 } else {
1453                         /* Change speed after current frame */
1454                         self->new_speed = speed;
1455                 }
1456         }
1457
1458         /* Save current bank */
1459         bank = inb(iobase+BSR);
1460
1461         /* Register and copy this frame to DMA memory */
1462         self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
1463         self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
1464         self->tx_fifo.tail += skb->len;
1465
1466         self->stats.tx_bytes += skb->len;
1467
1468         skb_copy_from_linear_data(skb, self->tx_fifo.queue[self->tx_fifo.free].start,
1469                       skb->len);
1470         self->tx_fifo.len++;
1471         self->tx_fifo.free++;
1472
1473         /* Start transmit only if there is currently no transmit going on */
1474         if (self->tx_fifo.len == 1) {
1475                 /* Check if we must wait the min turn time or not */
1476                 mtt = irda_get_mtt(skb);
1477                 if (mtt) {
1478                         /* Check how much time we have used already */
1479                         do_gettimeofday(&self->now);
1480                         diff = self->now.tv_usec - self->stamp.tv_usec;
1481                         if (diff < 0)
1482                                 diff += 1000000;
1483
1484                         /* Check if the mtt is larger than the time we have
1485                          * already used by all the protocol processing
1486                          */
1487                         if (mtt > diff) {
1488                                 mtt -= diff;
1489
1490                                 /*
1491                                  * Use timer if delay larger than 125 us, and
1492                                  * use udelay for smaller values which should
1493                                  * be acceptable
1494                                  */
1495                                 if (mtt > 125) {
1496                                         /* Adjust for timer resolution */
1497                                         mtt = mtt / 125;
1498
1499                                         /* Setup timer */
1500                                         switch_bank(iobase, BANK4);
1501                                         outb(mtt & 0xff, iobase+TMRL);
1502                                         outb((mtt >> 8) & 0x0f, iobase+TMRH);
1503
1504                                         /* Start timer */
1505                                         outb(IRCR1_TMR_EN, iobase+IRCR1);
1506                                         self->io.direction = IO_XMIT;
1507
1508                                         /* Enable timer interrupt */
1509                                         switch_bank(iobase, BANK0);
1510                                         outb(IER_TMR_IE, iobase+IER);
1511
1512                                         /* Timer will take care of the rest */
1513                                         goto out;
1514                                 } else
1515                                         udelay(mtt);
1516                         }
1517                 }
1518                 /* Enable DMA interrupt */
1519                 switch_bank(iobase, BANK0);
1520                 outb(IER_DMA_IE, iobase+IER);
1521
1522                 /* Transmit frame */
1523                 nsc_ircc_dma_xmit(self, iobase);
1524         }
1525  out:
1526         /* Not busy transmitting anymore if window is not full,
1527          * and if we don't need to change speed */
1528         if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0))
1529                 netif_wake_queue(self->netdev);
1530
1531         /* Restore bank register */
1532         outb(bank, iobase+BSR);
1533
1534         dev->trans_start = jiffies;
1535         spin_unlock_irqrestore(&self->lock, flags);
1536         dev_kfree_skb(skb);
1537
1538         return 0;
1539 }
1540
1541 /*
1542  * Function nsc_ircc_dma_xmit (self, iobase)
1543  *
1544  *    Transmit data using DMA
1545  *
1546  */
1547 static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase)
1548 {
1549         int bsr;
1550
1551         /* Save current bank */
1552         bsr = inb(iobase+BSR);
1553
1554         /* Disable DMA */
1555         switch_bank(iobase, BANK0);
1556         outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
1557
1558         self->io.direction = IO_XMIT;
1559
1560         /* Choose transmit DMA channel  */
1561         switch_bank(iobase, BANK2);
1562         outb(ECR1_DMASWP|ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
1563
1564         irda_setup_dma(self->io.dma,
1565                        ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
1566                         self->tx_buff.head) + self->tx_buff_dma,
1567                        self->tx_fifo.queue[self->tx_fifo.ptr].len,
1568                        DMA_TX_MODE);
1569
1570         /* Enable DMA and SIR interaction pulse */
1571         switch_bank(iobase, BANK0);
1572         outb(inb(iobase+MCR)|MCR_TX_DFR|MCR_DMA_EN|MCR_IR_PLS, iobase+MCR);
1573
1574         /* Restore bank register */
1575         outb(bsr, iobase+BSR);
1576 }
1577
1578 /*
1579  * Function nsc_ircc_pio_xmit (self, iobase)
1580  *
1581  *    Transmit data using PIO. Returns the number of bytes that actually
1582  *    got transferred
1583  *
1584  */
1585 static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
1586 {
1587         int actual = 0;
1588         __u8 bank;
1589
1590         IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
1591
1592         /* Save current bank */
1593         bank = inb(iobase+BSR);
1594
1595         switch_bank(iobase, BANK0);
1596         if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
1597                 IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
1598                            __FUNCTION__);
1599
1600                 /* FIFO may still be filled to the Tx interrupt threshold */
1601                 fifo_size -= 17;
1602         }
1603
1604         /* Fill FIFO with current frame */
1605         while ((fifo_size-- > 0) && (actual < len)) {
1606                 /* Transmit next byte */
1607                 outb(buf[actual++], iobase+TXD);
1608         }
1609
1610         IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n",
1611                    __FUNCTION__, fifo_size, actual, len);
1612
1613         /* Restore bank */
1614         outb(bank, iobase+BSR);
1615
1616         return actual;
1617 }
1618
1619 /*
1620  * Function nsc_ircc_dma_xmit_complete (self)
1621  *
1622  *    The transfer of a frame in finished. This function will only be called
1623  *    by the interrupt handler
1624  *
1625  */
1626 static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
1627 {
1628         int iobase;
1629         __u8 bank;
1630         int ret = TRUE;
1631
1632         IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
1633
1634         iobase = self->io.fir_base;
1635
1636         /* Save current bank */
1637         bank = inb(iobase+BSR);
1638
1639         /* Disable DMA */
1640         switch_bank(iobase, BANK0);
1641         outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
1642
1643         /* Check for underrrun! */
1644         if (inb(iobase+ASCR) & ASCR_TXUR) {
1645                 self->stats.tx_errors++;
1646                 self->stats.tx_fifo_errors++;
1647
1648                 /* Clear bit, by writing 1 into it */
1649                 outb(ASCR_TXUR, iobase+ASCR);
1650         } else {
1651                 self->stats.tx_packets++;
1652         }
1653
1654         /* Finished with this frame, so prepare for next */
1655         self->tx_fifo.ptr++;
1656         self->tx_fifo.len--;
1657
1658         /* Any frames to be sent back-to-back? */
1659         if (self->tx_fifo.len) {
1660                 nsc_ircc_dma_xmit(self, iobase);
1661
1662                 /* Not finished yet! */
1663                 ret = FALSE;
1664         } else {
1665                 /* Reset Tx FIFO info */
1666                 self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1667                 self->tx_fifo.tail = self->tx_buff.head;
1668         }
1669
1670         /* Make sure we have room for more frames and
1671          * that we don't need to change speed */
1672         if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0)) {
1673                 /* Not busy transmitting anymore */
1674                 /* Tell the network layer, that we can accept more frames */
1675                 netif_wake_queue(self->netdev);
1676         }
1677
1678         /* Restore bank */
1679         outb(bank, iobase+BSR);
1680
1681         return ret;
1682 }
1683
1684 /*
1685  * Function nsc_ircc_dma_receive (self)
1686  *
1687  *    Get ready for receiving a frame. The device will initiate a DMA
1688  *    if it starts to receive a frame.
1689  *
1690  */
1691 static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self)
1692 {
1693         int iobase;
1694         __u8 bsr;
1695
1696         iobase = self->io.fir_base;
1697
1698         /* Reset Tx FIFO info */
1699         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1700         self->tx_fifo.tail = self->tx_buff.head;
1701
1702         /* Save current bank */
1703         bsr = inb(iobase+BSR);
1704
1705         /* Disable DMA */
1706         switch_bank(iobase, BANK0);
1707         outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
1708
1709         /* Choose DMA Rx, DMA Fairness, and Advanced mode */
1710         switch_bank(iobase, BANK2);
1711         outb(ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
1712
1713         self->io.direction = IO_RECV;
1714         self->rx_buff.data = self->rx_buff.head;
1715
1716         /* Reset Rx FIFO. This will also flush the ST_FIFO */
1717         switch_bank(iobase, BANK0);
1718         outb(FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
1719
1720         self->st_fifo.len = self->st_fifo.pending_bytes = 0;
1721         self->st_fifo.tail = self->st_fifo.head = 0;
1722
1723         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1724                        DMA_RX_MODE);
1725
1726         /* Enable DMA */
1727         switch_bank(iobase, BANK0);
1728         outb(inb(iobase+MCR)|MCR_DMA_EN, iobase+MCR);
1729
1730         /* Restore bank register */
1731         outb(bsr, iobase+BSR);
1732
1733         return 0;
1734 }
1735
1736 /*
1737  * Function nsc_ircc_dma_receive_complete (self)
1738  *
1739  *    Finished with receiving frames
1740  *
1741  *
1742  */
1743 static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
1744 {
1745         struct st_fifo *st_fifo;
1746         struct sk_buff *skb;
1747         __u8 status;
1748         __u8 bank;
1749         int len;
1750
1751         st_fifo = &self->st_fifo;
1752
1753         /* Save current bank */
1754         bank = inb(iobase+BSR);
1755
1756         /* Read all entries in status FIFO */
1757         switch_bank(iobase, BANK5);
1758         while ((status = inb(iobase+FRM_ST)) & FRM_ST_VLD) {
1759                 /* We must empty the status FIFO no matter what */
1760                 len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
1761
1762                 if (st_fifo->tail >= MAX_RX_WINDOW) {
1763                         IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
1764                         continue;
1765                 }
1766
1767                 st_fifo->entries[st_fifo->tail].status = status;
1768                 st_fifo->entries[st_fifo->tail].len = len;
1769                 st_fifo->pending_bytes += len;
1770                 st_fifo->tail++;
1771                 st_fifo->len++;
1772         }
1773         /* Try to process all entries in status FIFO */
1774         while (st_fifo->len > 0) {
1775                 /* Get first entry */
1776                 status = st_fifo->entries[st_fifo->head].status;
1777                 len    = st_fifo->entries[st_fifo->head].len;
1778                 st_fifo->pending_bytes -= len;
1779                 st_fifo->head++;
1780                 st_fifo->len--;
1781
1782                 /* Check for errors */
1783                 if (status & FRM_ST_ERR_MSK) {
1784                         if (status & FRM_ST_LOST_FR) {
1785                                 /* Add number of lost frames to stats */
1786                                 self->stats.rx_errors += len;
1787                         } else {
1788                                 /* Skip frame */
1789                                 self->stats.rx_errors++;
1790
1791                                 self->rx_buff.data += len;
1792
1793                                 if (status & FRM_ST_MAX_LEN)
1794                                         self->stats.rx_length_errors++;
1795
1796                                 if (status & FRM_ST_PHY_ERR)
1797                                         self->stats.rx_frame_errors++;
1798
1799                                 if (status & FRM_ST_BAD_CRC)
1800                                         self->stats.rx_crc_errors++;
1801                         }
1802                         /* The errors below can be reported in both cases */
1803                         if (status & FRM_ST_OVR1)
1804                                 self->stats.rx_fifo_errors++;
1805
1806                         if (status & FRM_ST_OVR2)
1807                                 self->stats.rx_fifo_errors++;
1808                 } else {
1809                         /*
1810                          * First we must make sure that the frame we
1811                          * want to deliver is all in main memory. If we
1812                          * cannot tell, then we check if the Rx FIFO is
1813                          * empty. If not then we will have to take a nap
1814                          * and try again later.
1815                          */
1816                         if (st_fifo->pending_bytes < self->io.fifo_size) {
1817                                 switch_bank(iobase, BANK0);
1818                                 if (inb(iobase+LSR) & LSR_RXDA) {
1819                                         /* Put this entry back in fifo */
1820                                         st_fifo->head--;
1821                                         st_fifo->len++;
1822                                         st_fifo->pending_bytes += len;
1823                                         st_fifo->entries[st_fifo->head].status = status;
1824                                         st_fifo->entries[st_fifo->head].len = len;
1825                                         /*
1826                                          * DMA not finished yet, so try again
1827                                          * later, set timer value, resolution
1828                                          * 125 us
1829                                          */
1830                                         switch_bank(iobase, BANK4);
1831                                         outb(0x02, iobase+TMRL); /* x 125 us */
1832                                         outb(0x00, iobase+TMRH);
1833
1834                                         /* Start timer */
1835                                         outb(IRCR1_TMR_EN, iobase+IRCR1);
1836
1837                                         /* Restore bank register */
1838                                         outb(bank, iobase+BSR);
1839
1840                                         return FALSE; /* I'll be back! */
1841                                 }
1842                         }
1843
1844                         /*
1845                          * Remember the time we received this frame, so we can
1846                          * reduce the min turn time a bit since we will know
1847                          * how much time we have used for protocol processing
1848                          */
1849                         do_gettimeofday(&self->stamp);
1850
1851                         skb = dev_alloc_skb(len+1);
1852                         if (skb == NULL)  {
1853                                 IRDA_WARNING("%s(), memory squeeze, "
1854                                              "dropping frame.\n",
1855                                              __FUNCTION__);
1856                                 self->stats.rx_dropped++;
1857
1858                                 /* Restore bank register */
1859                                 outb(bank, iobase+BSR);
1860
1861                                 return FALSE;
1862                         }
1863
1864                         /* Make sure IP header gets aligned */
1865                         skb_reserve(skb, 1);
1866
1867                         /* Copy frame without CRC */
1868                         if (self->io.speed < 4000000) {
1869                                 skb_put(skb, len-2);
1870                                 skb_copy_to_linear_data(skb,
1871                                                         self->rx_buff.data,
1872                                                         len - 2);
1873                         } else {
1874                                 skb_put(skb, len-4);
1875                                 skb_copy_to_linear_data(skb,
1876                                                         self->rx_buff.data,
1877                                                         len - 4);
1878                         }
1879
1880                         /* Move to next frame */
1881                         self->rx_buff.data += len;
1882                         self->stats.rx_bytes += len;
1883                         self->stats.rx_packets++;
1884
1885                         skb->dev = self->netdev;
1886                         skb_reset_mac_header(skb);
1887                         skb->protocol = htons(ETH_P_IRDA);
1888                         netif_rx(skb);
1889                         self->netdev->last_rx = jiffies;
1890                 }
1891         }
1892         /* Restore bank register */
1893         outb(bank, iobase+BSR);
1894
1895         return TRUE;
1896 }
1897
1898 /*
1899  * Function nsc_ircc_pio_receive (self)
1900  *
1901  *    Receive all data in receiver FIFO
1902  *
1903  */
1904 static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self)
1905 {
1906         __u8 byte;
1907         int iobase;
1908
1909         iobase = self->io.fir_base;
1910
1911         /*  Receive all characters in Rx FIFO */
1912         do {
1913                 byte = inb(iobase+RXD);
1914                 async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
1915                                   byte);
1916         } while (inb(iobase+LSR) & LSR_RXDA); /* Data available */
1917 }
1918
1919 /*
1920  * Function nsc_ircc_sir_interrupt (self, eir)
1921  *
1922  *    Handle SIR interrupt
1923  *
1924  */
1925 static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
1926 {
1927         int actual;
1928
1929         /* Check if transmit FIFO is low on data */
1930         if (eir & EIR_TXLDL_EV) {
1931                 /* Write data left in transmit buffer */
1932                 actual = nsc_ircc_pio_write(self->io.fir_base,
1933                                            self->tx_buff.data,
1934                                            self->tx_buff.len,
1935                                            self->io.fifo_size);
1936                 self->tx_buff.data += actual;
1937                 self->tx_buff.len  -= actual;
1938
1939                 self->io.direction = IO_XMIT;
1940
1941                 /* Check if finished */
1942                 if (self->tx_buff.len > 0)
1943                         self->ier = IER_TXLDL_IE;
1944                 else {
1945
1946                         self->stats.tx_packets++;
1947                         netif_wake_queue(self->netdev);
1948                         self->ier = IER_TXEMP_IE;
1949                 }
1950
1951         }
1952         /* Check if transmission has completed */
1953         if (eir & EIR_TXEMP_EV) {
1954                 /* Turn around and get ready to receive some data */
1955                 self->io.direction = IO_RECV;
1956                 self->ier = IER_RXHDL_IE;
1957                 /* Check if we need to change the speed?
1958                  * Need to be after self->io.direction to avoid race with
1959                  * nsc_ircc_hard_xmit_sir() - Jean II */
1960                 if (self->new_speed) {
1961                         IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
1962                         self->ier = nsc_ircc_change_speed(self,
1963                                                           self->new_speed);
1964                         self->new_speed = 0;
1965                         netif_wake_queue(self->netdev);
1966
1967                         /* Check if we are going to FIR */
1968                         if (self->io.speed > 115200) {
1969                                 /* No need to do anymore SIR stuff */
1970                                 return;
1971                         }
1972                 }
1973         }
1974
1975         /* Rx FIFO threshold or timeout */
1976         if (eir & EIR_RXHDL_EV) {
1977                 nsc_ircc_pio_receive(self);
1978
1979                 /* Keep receiving */
1980                 self->ier = IER_RXHDL_IE;
1981         }
1982 }
1983
1984 /*
1985  * Function nsc_ircc_fir_interrupt (self, eir)
1986  *
1987  *    Handle MIR/FIR interrupt
1988  *
1989  */
1990 static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase,
1991                                    int eir)
1992 {
1993         __u8 bank;
1994
1995         bank = inb(iobase+BSR);
1996
1997         /* Status FIFO event*/
1998         if (eir & EIR_SFIF_EV) {
1999                 /* Check if DMA has finished */
2000                 if (nsc_ircc_dma_receive_complete(self, iobase)) {
2001                         /* Wait for next status FIFO interrupt */
2002                         self->ier = IER_SFIF_IE;
2003                 } else {
2004                         self->ier = IER_SFIF_IE | IER_TMR_IE;
2005                 }
2006         } else if (eir & EIR_TMR_EV) { /* Timer finished */
2007                 /* Disable timer */
2008                 switch_bank(iobase, BANK4);
2009                 outb(0, iobase+IRCR1);
2010
2011                 /* Clear timer event */
2012                 switch_bank(iobase, BANK0);
2013                 outb(ASCR_CTE, iobase+ASCR);
2014
2015                 /* Check if this is a Tx timer interrupt */
2016                 if (self->io.direction == IO_XMIT) {
2017                         nsc_ircc_dma_xmit(self, iobase);
2018
2019                         /* Interrupt on DMA */
2020                         self->ier = IER_DMA_IE;
2021                 } else {
2022                         /* Check (again) if DMA has finished */
2023                         if (nsc_ircc_dma_receive_complete(self, iobase)) {
2024                                 self->ier = IER_SFIF_IE;
2025                         } else {
2026                                 self->ier = IER_SFIF_IE | IER_TMR_IE;
2027                         }
2028                 }
2029         } else if (eir & EIR_DMA_EV) {
2030                 /* Finished with all transmissions? */
2031                 if (nsc_ircc_dma_xmit_complete(self)) {
2032                         if(self->new_speed != 0) {
2033                                 /* As we stop the Tx queue, the speed change
2034                                  * need to be done when the Tx fifo is
2035                                  * empty. Ask for a Tx done interrupt */
2036                                 self->ier = IER_TXEMP_IE;
2037                         } else {
2038                                 /* Check if there are more frames to be
2039                                  * transmitted */
2040                                 if (irda_device_txqueue_empty(self->netdev)) {
2041                                         /* Prepare for receive */
2042                                         nsc_ircc_dma_receive(self);
2043                                         self->ier = IER_SFIF_IE;
2044                                 } else
2045                                         IRDA_WARNING("%s(), potential "
2046                                                      "Tx queue lockup !\n",
2047                                                      __FUNCTION__);
2048                         }
2049                 } else {
2050                         /*  Not finished yet, so interrupt on DMA again */
2051                         self->ier = IER_DMA_IE;
2052                 }
2053         } else if (eir & EIR_TXEMP_EV) {
2054                 /* The Tx FIFO has totally drained out, so now we can change
2055                  * the speed... - Jean II */
2056                 self->ier = nsc_ircc_change_speed(self, self->new_speed);
2057                 self->new_speed = 0;
2058                 netif_wake_queue(self->netdev);
2059                 /* Note : nsc_ircc_change_speed() restarted Rx fifo */
2060         }
2061
2062         outb(bank, iobase+BSR);
2063 }
2064
2065 /*
2066  * Function nsc_ircc_interrupt (irq, dev_id, regs)
2067  *
2068  *    An interrupt from the chip has arrived. Time to do some work
2069  *
2070  */
2071 static irqreturn_t nsc_ircc_interrupt(int irq, void *dev_id)
2072 {
2073         struct net_device *dev = dev_id;
2074         struct nsc_ircc_cb *self;
2075         __u8 bsr, eir;
2076         int iobase;
2077
2078         self = dev->priv;
2079
2080         spin_lock(&self->lock);
2081
2082         iobase = self->io.fir_base;
2083
2084         bsr = inb(iobase+BSR);  /* Save current bank */
2085
2086         switch_bank(iobase, BANK0);
2087         self->ier = inb(iobase+IER);
2088         eir = inb(iobase+EIR) & self->ier; /* Mask out the interesting ones */
2089
2090         outb(0, iobase+IER); /* Disable interrupts */
2091
2092         if (eir) {
2093                 /* Dispatch interrupt handler for the current speed */
2094                 if (self->io.speed > 115200)
2095                         nsc_ircc_fir_interrupt(self, iobase, eir);
2096                 else
2097                         nsc_ircc_sir_interrupt(self, eir);
2098         }
2099
2100         outb(self->ier, iobase+IER); /* Restore interrupts */
2101         outb(bsr, iobase+BSR);       /* Restore bank register */
2102
2103         spin_unlock(&self->lock);
2104         return IRQ_RETVAL(eir);
2105 }
2106
2107 /*
2108  * Function nsc_ircc_is_receiving (self)
2109  *
2110  *    Return TRUE is we are currently receiving a frame
2111  *
2112  */
2113 static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self)
2114 {
2115         unsigned long flags;
2116         int status = FALSE;
2117         int iobase;
2118         __u8 bank;
2119
2120         IRDA_ASSERT(self != NULL, return FALSE;);
2121
2122         spin_lock_irqsave(&self->lock, flags);
2123
2124         if (self->io.speed > 115200) {
2125                 iobase = self->io.fir_base;
2126
2127                 /* Check if rx FIFO is not empty */
2128                 bank = inb(iobase+BSR);
2129                 switch_bank(iobase, BANK2);
2130                 if ((inb(iobase+RXFLV) & 0x3f) != 0) {
2131                         /* We are receiving something */
2132                         status =  TRUE;
2133                 }
2134                 outb(bank, iobase+BSR);
2135         } else
2136                 status = (self->rx_buff.state != OUTSIDE_FRAME);
2137
2138         spin_unlock_irqrestore(&self->lock, flags);
2139
2140         return status;
2141 }
2142
2143 /*
2144  * Function nsc_ircc_net_open (dev)
2145  *
2146  *    Start the device
2147  *
2148  */
2149 static int nsc_ircc_net_open(struct net_device *dev)
2150 {
2151         struct nsc_ircc_cb *self;
2152         int iobase;
2153         char hwname[32];
2154         __u8 bank;
2155
2156         IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
2157
2158         IRDA_ASSERT(dev != NULL, return -1;);
2159         self = (struct nsc_ircc_cb *) dev->priv;
2160
2161         IRDA_ASSERT(self != NULL, return 0;);
2162
2163         iobase = self->io.fir_base;
2164
2165         if (request_irq(self->io.irq, nsc_ircc_interrupt, 0, dev->name, dev)) {
2166                 IRDA_WARNING("%s, unable to allocate irq=%d\n",
2167                              driver_name, self->io.irq);
2168                 return -EAGAIN;
2169         }
2170         /*
2171          * Always allocate the DMA channel after the IRQ, and clean up on
2172          * failure.
2173          */
2174         if (request_dma(self->io.dma, dev->name)) {
2175                 IRDA_WARNING("%s, unable to allocate dma=%d\n",
2176                              driver_name, self->io.dma);
2177                 free_irq(self->io.irq, dev);
2178                 return -EAGAIN;
2179         }
2180
2181         /* Save current bank */
2182         bank = inb(iobase+BSR);
2183
2184         /* turn on interrupts */
2185         switch_bank(iobase, BANK0);
2186         outb(IER_LS_IE | IER_RXHDL_IE, iobase+IER);
2187
2188         /* Restore bank register */
2189         outb(bank, iobase+BSR);
2190
2191         /* Ready to play! */
2192         netif_start_queue(dev);
2193
2194         /* Give self a hardware name */
2195         sprintf(hwname, "NSC-FIR @ 0x%03x", self->io.fir_base);
2196
2197         /*
2198          * Open new IrLAP layer instance, now that everything should be
2199          * initialized properly
2200          */
2201         self->irlap = irlap_open(dev, &self->qos, hwname);
2202
2203         return 0;
2204 }
2205
2206 /*
2207  * Function nsc_ircc_net_close (dev)
2208  *
2209  *    Stop the device
2210  *
2211  */
2212 static int nsc_ircc_net_close(struct net_device *dev)
2213 {
2214         struct nsc_ircc_cb *self;
2215         int iobase;
2216         __u8 bank;
2217
2218         IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
2219
2220         IRDA_ASSERT(dev != NULL, return -1;);
2221
2222         self = (struct nsc_ircc_cb *) dev->priv;
2223         IRDA_ASSERT(self != NULL, return 0;);
2224
2225         /* Stop device */
2226         netif_stop_queue(dev);
2227
2228         /* Stop and remove instance of IrLAP */
2229         if (self->irlap)
2230                 irlap_close(self->irlap);
2231         self->irlap = NULL;
2232
2233         iobase = self->io.fir_base;
2234
2235         disable_dma(self->io.dma);
2236
2237         /* Save current bank */
2238         bank = inb(iobase+BSR);
2239
2240         /* Disable interrupts */
2241         switch_bank(iobase, BANK0);
2242         outb(0, iobase+IER);
2243
2244         free_irq(self->io.irq, dev);
2245         free_dma(self->io.dma);
2246
2247         /* Restore bank register */
2248         outb(bank, iobase+BSR);
2249
2250         return 0;
2251 }
2252
2253 /*
2254  * Function nsc_ircc_net_ioctl (dev, rq, cmd)
2255  *
2256  *    Process IOCTL commands for this device
2257  *
2258  */
2259 static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2260 {
2261         struct if_irda_req *irq = (struct if_irda_req *) rq;
2262         struct nsc_ircc_cb *self;
2263         unsigned long flags;
2264         int ret = 0;
2265
2266         IRDA_ASSERT(dev != NULL, return -1;);
2267
2268         self = dev->priv;
2269
2270         IRDA_ASSERT(self != NULL, return -1;);
2271
2272         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
2273
2274         switch (cmd) {
2275         case SIOCSBANDWIDTH: /* Set bandwidth */
2276                 if (!capable(CAP_NET_ADMIN)) {
2277                         ret = -EPERM;
2278                         break;
2279                 }
2280                 spin_lock_irqsave(&self->lock, flags);
2281                 nsc_ircc_change_speed(self, irq->ifr_baudrate);
2282                 spin_unlock_irqrestore(&self->lock, flags);
2283                 break;
2284         case SIOCSMEDIABUSY: /* Set media busy */
2285                 if (!capable(CAP_NET_ADMIN)) {
2286                         ret = -EPERM;
2287                         break;
2288                 }
2289                 irda_device_set_media_busy(self->netdev, TRUE);
2290                 break;
2291         case SIOCGRECEIVING: /* Check if we are receiving right now */
2292                 /* This is already protected */
2293                 irq->ifr_receiving = nsc_ircc_is_receiving(self);
2294                 break;
2295         default:
2296                 ret = -EOPNOTSUPP;
2297         }
2298         return ret;
2299 }
2300
2301 static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev)
2302 {
2303         struct nsc_ircc_cb *self = (struct nsc_ircc_cb *) dev->priv;
2304
2305         return &self->stats;
2306 }
2307
2308 static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
2309 {
2310         struct nsc_ircc_cb *self = platform_get_drvdata(dev);
2311         int bank;
2312         unsigned long flags;
2313         int iobase = self->io.fir_base;
2314
2315         if (self->io.suspended)
2316                 return 0;
2317
2318         IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
2319
2320         rtnl_lock();
2321         if (netif_running(self->netdev)) {
2322                 netif_device_detach(self->netdev);
2323                 spin_lock_irqsave(&self->lock, flags);
2324                 /* Save current bank */
2325                 bank = inb(iobase+BSR);
2326
2327                 /* Disable interrupts */
2328                 switch_bank(iobase, BANK0);
2329                 outb(0, iobase+IER);
2330
2331                 /* Restore bank register */
2332                 outb(bank, iobase+BSR);
2333
2334                 spin_unlock_irqrestore(&self->lock, flags);
2335                 free_irq(self->io.irq, self->netdev);
2336                 disable_dma(self->io.dma);
2337         }
2338         self->io.suspended = 1;
2339         rtnl_unlock();
2340
2341         return 0;
2342 }
2343
2344 static int nsc_ircc_resume(struct platform_device *dev)
2345 {
2346         struct nsc_ircc_cb *self = platform_get_drvdata(dev);
2347         unsigned long flags;
2348
2349         if (!self->io.suspended)
2350                 return 0;
2351
2352         IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
2353
2354         rtnl_lock();
2355         nsc_ircc_setup(&self->io);
2356         nsc_ircc_init_dongle_interface(self->io.fir_base, self->io.dongle_id);
2357
2358         if (netif_running(self->netdev)) {
2359                 if (request_irq(self->io.irq, nsc_ircc_interrupt, 0,
2360                                 self->netdev->name, self->netdev)) {
2361                         IRDA_WARNING("%s, unable to allocate irq=%d\n",
2362                                      driver_name, self->io.irq);
2363
2364                         /*
2365                          * Don't fail resume process, just kill this
2366                          * network interface
2367                          */
2368                         unregister_netdevice(self->netdev);
2369                 } else {
2370                         spin_lock_irqsave(&self->lock, flags);
2371                         nsc_ircc_change_speed(self, self->io.speed);
2372                         spin_unlock_irqrestore(&self->lock, flags);
2373                         netif_device_attach(self->netdev);
2374                 }
2375
2376         } else {
2377                 spin_lock_irqsave(&self->lock, flags);
2378                 nsc_ircc_change_speed(self, 9600);
2379                 spin_unlock_irqrestore(&self->lock, flags);
2380         }
2381         self->io.suspended = 0;
2382         rtnl_unlock();
2383
2384         return 0;
2385 }
2386
2387 MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
2388 MODULE_DESCRIPTION("NSC IrDA Device Driver");
2389 MODULE_LICENSE("GPL");
2390
2391
2392 module_param(qos_mtt_bits, int, 0);
2393 MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
2394 module_param_array(io, int, NULL, 0);
2395 MODULE_PARM_DESC(io, "Base I/O addresses");
2396 module_param_array(irq, int, NULL, 0);
2397 MODULE_PARM_DESC(irq, "IRQ lines");
2398 module_param_array(dma, int, NULL, 0);
2399 MODULE_PARM_DESC(dma, "DMA channels");
2400 module_param(dongle_id, int, 0);
2401 MODULE_PARM_DESC(dongle_id, "Type-id of used dongle");
2402
2403 module_init(nsc_ircc_init);
2404 module_exit(nsc_ircc_cleanup);
2405