git.oblomov.eu Git - linux-2.6/blob - drivers/infiniband/hw/ipath/ipath_init_chip.c

   1 /*
   2  * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
   3  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
   4  *
   5  * This software is available to you under a choice of one of two
   6  * licenses.  You may choose to be licensed under the terms of the GNU
   7  * General Public License (GPL) Version 2, available from the file
   8  * COPYING in the main directory of this source tree, or the
   9  * OpenIB.org BSD license below:
  10  *
  11  *     Redistribution and use in source and binary forms, with or
  12  *     without modification, are permitted provided that the following
  13  *     conditions are met:
  14  *
  15  *      - Redistributions of source code must retain the above
  16  *        copyright notice, this list of conditions and the following
  17  *        disclaimer.
  18  *
  19  *      - Redistributions in binary form must reproduce the above
  20  *        copyright notice, this list of conditions and the following
  21  *        disclaimer in the documentation and/or other materials
  22  *        provided with the distribution.
  23  *
  24  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  25  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  26  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  27  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  28  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  29  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  30  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  31  * SOFTWARE.
  32  */
  33
  34 #include <linux/pci.h>
  35 #include <linux/netdevice.h>
  36 #include <linux/vmalloc.h>
  37
  38 #include "ipath_kernel.h"
  39 #include "ipath_common.h"
  40
  41 /*
  42  * min buffers we want to have per port, after driver
  43  */
  44 #define IPATH_MIN_USER_PORT_BUFCNT 8
  45
  46 /*
  47  * Number of ports we are configured to use (to allow for more pio
  48  * buffers per port, etc.)  Zero means use chip value.
  49  */
  50 static ushort ipath_cfgports;
  51
  52 module_param_named(cfgports, ipath_cfgports, ushort, S_IRUGO);
  53 MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
  54
  55 /*
  56  * Number of buffers reserved for driver (verbs and layered drivers.)
  57  * Reserved at end of buffer list.   Initialized based on
  58  * number of PIO buffers if not set via module interface.
  59  * The problem with this is that it's global, but we'll use different
  60  * numbers for different chip types.  So the default value is not
  61  * very useful.  I've redefined it for the 1.3 release so that it's
  62  * zero unless set by the user to something else, in which case we
  63  * try to respect it.
  64  */
  65 static ushort ipath_kpiobufs;
  66
  67 static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
  68
  69 module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
  70                   &ipath_kpiobufs, S_IWUSR | S_IRUGO);
  71 MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
  72
  73 /**
  74  * create_port0_egr - allocate the eager TID buffers
  75  * @dd: the infinipath device
  76  *
  77  * This code is now quite different for user and kernel, because
  78  * the kernel uses skb's, for the accelerated network performance.
  79  * This is the kernel (port0) version.
  80  *
  81  * Allocate the eager TID buffers and program them into infinipath.
  82  * We use the network layer alloc_skb() allocator to allocate the
  83  * memory, and either use the buffers as is for things like verbs
  84  * packets, or pass the buffers up to the ipath layered driver and
  85  * thence the network layer, replacing them as we do so (see
  86  * ipath_rcv_layer()).
  87  */
  88 static int create_port0_egr(struct ipath_devdata *dd)
  89 {
  90         unsigned e, egrcnt;
  91         struct ipath_skbinfo *skbinfo;
  92         int ret;
  93
  94         egrcnt = dd->ipath_rcvegrcnt;
  95
  96         skbinfo = vmalloc(sizeof(*dd->ipath_port0_skbinfo) * egrcnt);
  97         if (skbinfo == NULL) {
  98                 ipath_dev_err(dd, "allocation error for eager TID "
  99                               "skb array\n");
 100                 ret = -ENOMEM;
 101                 goto bail;
 102         }
 103         for (e = 0; e < egrcnt; e++) {
 104                 /*
 105                  * This is a bit tricky in that we allocate extra
 106                  * space for 2 bytes of the 14 byte ethernet header.
 107                  * These two bytes are passed in the ipath header so
 108                  * the rest of the data is word aligned.  We allocate
 109                  * 4 bytes so that the data buffer stays word aligned.
 110                  * See ipath_kreceive() for more details.
 111                  */
 112                 skbinfo[e].skb = ipath_alloc_skb(dd, GFP_KERNEL);
 113                 if (!skbinfo[e].skb) {
 114                         ipath_dev_err(dd, "SKB allocation error for "
 115                                       "eager TID %u\n", e);
 116                         while (e != 0)
 117                                 dev_kfree_skb(skbinfo[--e].skb);
 118                         vfree(skbinfo);
 119                         ret = -ENOMEM;
 120                         goto bail;
 121                 }
 122         }
 123         /*
 124          * After loop above, so we can test non-NULL to see if ready
 125          * to use at receive, etc.
 126          */
 127         dd->ipath_port0_skbinfo = skbinfo;
 128
 129         for (e = 0; e < egrcnt; e++) {
 130                 dd->ipath_port0_skbinfo[e].phys =
 131                   ipath_map_single(dd->pcidev,
 132                                    dd->ipath_port0_skbinfo[e].skb->data,
 133                                    dd->ipath_ibmaxlen, PCI_DMA_FROMDEVICE);
 134                 dd->ipath_f_put_tid(dd, e + (u64 __iomem *)
 135                                     ((char __iomem *) dd->ipath_kregbase +
 136                                      dd->ipath_rcvegrbase),
 137                                     RCVHQ_RCV_TYPE_EAGER,
 138                                     dd->ipath_port0_skbinfo[e].phys);
 139         }
 140
 141         ret = 0;
 142
 143 bail:
 144         return ret;
 145 }
 146
 147 static int bringup_link(struct ipath_devdata *dd)
 148 {
 149         u64 val, ibc;
 150         int ret = 0;
 151
 152         /* hold IBC in reset */
 153         dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
 154         ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
 155                          dd->ipath_control);
 156
 157         /*
 158          * Note that prior to try 14 or 15 of IB, the credit scaling
 159          * wasn't working, because it was swapped for writes with the
 160          * 1 bit default linkstate field
 161          */
 162
 163         /* ignore pbc and align word */
 164         val = dd->ipath_piosize2k - 2 * sizeof(u32);
 165         /*
 166          * for ICRC, which we only send in diag test pkt mode, and we
 167          * don't need to worry about that for mtu
 168          */
 169         val += 1;
 170         /*
 171          * Set the IBC maxpktlength to the size of our pio buffers the
 172          * maxpktlength is in words.  This is *not* the IB data MTU.
 173          */
 174         ibc = (val / sizeof(u32)) << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
 175         /* in KB */
 176         ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
 177         /*
 178          * How often flowctrl sent.  More or less in usecs; balance against
 179          * watermark value, so that in theory senders always get a flow
 180          * control update in time to not let the IB link go idle.
 181          */
 182         ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT;
 183         /* max error tolerance */
 184         ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
 185         /* use "real" buffer space for */
 186         ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT;
 187         /* IB credit flow control. */
 188         ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
 189         /* initially come up waiting for TS1, without sending anything. */
 190         dd->ipath_ibcctrl = ibc;
 191         /*
 192          * Want to start out with both LINKCMD and LINKINITCMD in NOP
 193          * (0 and 0).  Don't put linkinitcmd in ipath_ibcctrl, want that
 194          * to stay a NOP
 195          */
 196         ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
 197                 INFINIPATH_IBCC_LINKINITCMD_SHIFT;
 198         ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
 199                    (unsigned long long) ibc);
 200         ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);
 201
 202         // be sure chip saw it
 203         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
 204
 205         ret = dd->ipath_f_bringup_serdes(dd);
 206
 207         if (ret)
 208                 dev_info(&dd->pcidev->dev, "Could not initialize SerDes, "
 209                          "not usable\n");
 210         else {
 211                 /* enable IBC */
 212                 dd->ipath_control |= INFINIPATH_C_LINKENABLE;
 213                 ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
 214                                  dd->ipath_control);
 215         }
 216
 217         return ret;
 218 }
 219
 220 static struct ipath_portdata *create_portdata0(struct ipath_devdata *dd)
 221 {
 222         struct ipath_portdata *pd = NULL;
 223
 224         pd = kzalloc(sizeof(*pd), GFP_KERNEL);
 225         if (pd) {
 226                 pd->port_dd = dd;
 227                 pd->port_cnt = 1;
 228                 /* The port 0 pkey table is used by the layer interface. */
 229                 pd->port_pkeys[0] = IPATH_DEFAULT_P_KEY;
 230         }
 231         return pd;
 232 }
 233
 234 static int init_chip_first(struct ipath_devdata *dd,
 235                            struct ipath_portdata **pdp)
 236 {
 237         struct ipath_portdata *pd = NULL;
 238         int ret = 0;
 239         u64 val;
 240
 241         /*
 242          * skip cfgports stuff because we are not allocating memory,
 243          * and we don't want problems if the portcnt changed due to
 244          * cfgports.  We do still check and report a difference, if
 245          * not same (should be impossible).
 246          */
 247         dd->ipath_portcnt =
 248                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
 249         if (!ipath_cfgports)
 250                 dd->ipath_cfgports = dd->ipath_portcnt;
 251         else if (ipath_cfgports <= dd->ipath_portcnt) {
 252                 dd->ipath_cfgports = ipath_cfgports;
 253                 ipath_dbg("Configured to use %u ports out of %u in chip\n",
 254                           dd->ipath_cfgports, dd->ipath_portcnt);
 255         } else {
 256                 dd->ipath_cfgports = dd->ipath_portcnt;
 257                 ipath_dbg("Tried to configured to use %u ports; chip "
 258                           "only supports %u\n", ipath_cfgports,
 259                           dd->ipath_portcnt);
 260         }
 261         /*
 262          * Allocate full portcnt array, rather than just cfgports, because
 263          * cleanup iterates across all possible ports.
 264          */
 265         dd->ipath_pd = kzalloc(sizeof(*dd->ipath_pd) * dd->ipath_portcnt,
 266                                GFP_KERNEL);
 267
 268         if (!dd->ipath_pd) {
 269                 ipath_dev_err(dd, "Unable to allocate portdata array, "
 270                               "failing\n");
 271                 ret = -ENOMEM;
 272                 goto done;
 273         }
 274
 275         dd->ipath_lastegrheads = kzalloc(sizeof(*dd->ipath_lastegrheads)
 276                                          * dd->ipath_cfgports,
 277                                          GFP_KERNEL);
 278         dd->ipath_lastrcvhdrqtails =
 279                 kzalloc(sizeof(*dd->ipath_lastrcvhdrqtails)
 280                         * dd->ipath_cfgports, GFP_KERNEL);
 281
 282         if (!dd->ipath_lastegrheads || !dd->ipath_lastrcvhdrqtails) {
 283                 ipath_dev_err(dd, "Unable to allocate head arrays, "
 284                               "failing\n");
 285                 ret = -ENOMEM;
 286                 goto done;
 287         }
 288
 289         pd = create_portdata0(dd);
 290
 291         if (!pd) {
 292                 ipath_dev_err(dd, "Unable to allocate portdata for port "
 293                               "0, failing\n");
 294                 ret = -ENOMEM;
 295                 goto done;
 296         }
 297         dd->ipath_pd[0] = pd;
 298
 299         dd->ipath_rcvtidcnt =
 300                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
 301         dd->ipath_rcvtidbase =
 302                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
 303         dd->ipath_rcvegrcnt =
 304                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
 305         dd->ipath_rcvegrbase =
 306                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
 307         dd->ipath_palign =
 308                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
 309         dd->ipath_piobufbase =
 310                 ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufbase);
 311         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
 312         dd->ipath_piosize2k = val & ~0U;
 313         dd->ipath_piosize4k = val >> 32;
 314         /*
 315          * Note: the chips support a maximum MTU of 4096, but the driver
 316          * hasn't implemented this feature yet, so set the initial value
 317          * to 2048.
 318          */
 319         dd->ipath_ibmtu = 2048;
 320         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
 321         dd->ipath_piobcnt2k = val & ~0U;
 322         dd->ipath_piobcnt4k = val >> 32;
 323         dd->ipath_pio2kbase =
 324                 (u32 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
 325                                  (dd->ipath_piobufbase & 0xffffffff));
 326         if (dd->ipath_piobcnt4k) {
 327                 dd->ipath_pio4kbase = (u32 __iomem *)
 328                         (((char __iomem *) dd->ipath_kregbase) +
 329                          (dd->ipath_piobufbase >> 32));
 330                 /*
 331                  * 4K buffers take 2 pages; we use roundup just to be
 332                  * paranoid; we calculate it once here, rather than on
 333                  * ever buf allocate
 334                  */
 335                 dd->ipath_4kalign = ALIGN(dd->ipath_piosize4k,
 336                                           dd->ipath_palign);
 337                 ipath_dbg("%u 2k(%x) piobufs @ %p, %u 4k(%x) @ %p "
 338                           "(%x aligned)\n",
 339                           dd->ipath_piobcnt2k, dd->ipath_piosize2k,
 340                           dd->ipath_pio2kbase, dd->ipath_piobcnt4k,
 341                           dd->ipath_piosize4k, dd->ipath_pio4kbase,
 342                           dd->ipath_4kalign);
 343         }
 344         else ipath_dbg("%u 2k piobufs @ %p\n",
 345                        dd->ipath_piobcnt2k, dd->ipath_pio2kbase);
 346
 347         spin_lock_init(&dd->ipath_tid_lock);
 348
 349         spin_lock_init(&dd->ipath_gpio_lock);
 350         spin_lock_init(&dd->ipath_eep_st_lock);
 351         sema_init(&dd->ipath_eep_sem, 1);
 352
 353 done:
 354         *pdp = pd;
 355         return ret;
 356 }
 357
 358 /**
 359  * init_chip_reset - re-initialize after a reset, or enable
 360  * @dd: the infinipath device
 361  * @pdp: output for port data
 362  *
 363  * sanity check at least some of the values after reset, and
 364  * ensure no receive or transmit (explictly, in case reset
 365  * failed
 366  */
 367 static int init_chip_reset(struct ipath_devdata *dd,
 368                            struct ipath_portdata **pdp)
 369 {
 370         u32 rtmp;
 371
 372         *pdp = dd->ipath_pd[0];
 373         /* ensure chip does no sends or receives while we re-initialize */
 374         dd->ipath_control = dd->ipath_sendctrl = dd->ipath_rcvctrl = 0U;
 375         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, 0);
 376         ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0);
 377         ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0);
 378
 379         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
 380         if (dd->ipath_portcnt != rtmp)
 381                 dev_info(&dd->pcidev->dev, "portcnt was %u before "
 382                          "reset, now %u, using original\n",
 383                          dd->ipath_portcnt, rtmp);
 384         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
 385         if (rtmp != dd->ipath_rcvtidcnt)
 386                 dev_info(&dd->pcidev->dev, "tidcnt was %u before "
 387                          "reset, now %u, using original\n",
 388                          dd->ipath_rcvtidcnt, rtmp);
 389         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
 390         if (rtmp != dd->ipath_rcvtidbase)
 391                 dev_info(&dd->pcidev->dev, "tidbase was %u before "
 392                          "reset, now %u, using original\n",
 393                          dd->ipath_rcvtidbase, rtmp);
 394         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
 395         if (rtmp != dd->ipath_rcvegrcnt)
 396                 dev_info(&dd->pcidev->dev, "egrcnt was %u before "
 397                          "reset, now %u, using original\n",
 398                          dd->ipath_rcvegrcnt, rtmp);
 399         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
 400         if (rtmp != dd->ipath_rcvegrbase)
 401                 dev_info(&dd->pcidev->dev, "egrbase was %u before "
 402                          "reset, now %u, using original\n",
 403                          dd->ipath_rcvegrbase, rtmp);
 404
 405         return 0;
 406 }
 407
 408 static int init_pioavailregs(struct ipath_devdata *dd)
 409 {
 410         int ret;
 411
 412         dd->ipath_pioavailregs_dma = dma_alloc_coherent(
 413                 &dd->pcidev->dev, PAGE_SIZE, &dd->ipath_pioavailregs_phys,
 414                 GFP_KERNEL);
 415         if (!dd->ipath_pioavailregs_dma) {
 416                 ipath_dev_err(dd, "failed to allocate PIOavail reg area "
 417                               "in memory\n");
 418                 ret = -ENOMEM;
 419                 goto done;
 420         }
 421
 422         /*
 423          * we really want L2 cache aligned, but for current CPUs of
 424          * interest, they are the same.
 425          */
 426         dd->ipath_statusp = (u64 *)
 427                 ((char *)dd->ipath_pioavailregs_dma +
 428                  ((2 * L1_CACHE_BYTES +
 429                    dd->ipath_pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
 430         /* copy the current value now that it's really allocated */
 431         *dd->ipath_statusp = dd->_ipath_status;
 432         /*
 433          * setup buffer to hold freeze msg, accessible to apps,
 434          * following statusp
 435          */
 436         dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1];
 437         /* and its length */
 438         dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);
 439
 440         ret = 0;
 441
 442 done:
 443         return ret;
 444 }
 445
 446 /**
 447  * init_shadow_tids - allocate the shadow TID array
 448  * @dd: the infinipath device
 449  *
 450  * allocate the shadow TID array, so we can ipath_munlock previous
 451  * entries.  It may make more sense to move the pageshadow to the
 452  * port data structure, so we only allocate memory for ports actually
 453  * in use, since we at 8k per port, now.
 454  */
 455 static void init_shadow_tids(struct ipath_devdata *dd)
 456 {
 457         struct page **pages;
 458         dma_addr_t *addrs;
 459
 460         pages = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
 461                         sizeof(struct page *));
 462         if (!pages) {
 463                 ipath_dev_err(dd, "failed to allocate shadow page * "
 464                               "array, no expected sends!\n");
 465                 dd->ipath_pageshadow = NULL;
 466                 return;
 467         }
 468
 469         addrs = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
 470                         sizeof(dma_addr_t));
 471         if (!addrs) {
 472                 ipath_dev_err(dd, "failed to allocate shadow dma handle "
 473                               "array, no expected sends!\n");
 474                 vfree(dd->ipath_pageshadow);
 475                 dd->ipath_pageshadow = NULL;
 476                 return;
 477         }
 478
 479         memset(pages, 0, dd->ipath_cfgports * dd->ipath_rcvtidcnt *
 480                sizeof(struct page *));
 481
 482         dd->ipath_pageshadow = pages;
 483         dd->ipath_physshadow = addrs;
 484 }
 485
 486 static void enable_chip(struct ipath_devdata *dd,
 487                         struct ipath_portdata *pd, int reinit)
 488 {
 489         u32 val;
 490         int i;
 491
 492         if (!reinit)
 493                 init_waitqueue_head(&ipath_state_wait);
 494
 495         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
 496                          dd->ipath_rcvctrl);
 497
 498         /* Enable PIO send, and update of PIOavail regs to memory. */
 499         dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE |
 500                 INFINIPATH_S_PIOBUFAVAILUPD;
 501         ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 502                          dd->ipath_sendctrl);
 503
 504         /*
 505          * enable port 0 receive, and receive interrupt.  other ports
 506          * done as user opens and inits them.
 507          */
 508         dd->ipath_rcvctrl = INFINIPATH_R_TAILUPD |
 509                 (1ULL << INFINIPATH_R_PORTENABLE_SHIFT) |
 510                 (1ULL << INFINIPATH_R_INTRAVAIL_SHIFT);
 511         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
 512                          dd->ipath_rcvctrl);
 513
 514         /*
 515          * now ready for use.  this should be cleared whenever we
 516          * detect a reset, or initiate one.
 517          */
 518         dd->ipath_flags |= IPATH_INITTED;
 519
 520         /*
 521          * init our shadow copies of head from tail values, and write
 522          * head values to match.
 523          */
 524         val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
 525         (void)ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
 526         dd->ipath_port0head = ipath_read_ureg32(dd, ur_rcvhdrtail, 0);
 527
 528         /* Initialize so we interrupt on next packet received */
 529         (void)ipath_write_ureg(dd, ur_rcvhdrhead,
 530                                dd->ipath_rhdrhead_intr_off |
 531                                dd->ipath_port0head, 0);
 532
 533         /*
 534          * by now pioavail updates to memory should have occurred, so
 535          * copy them into our working/shadow registers; this is in
 536          * case something went wrong with abort, but mostly to get the
 537          * initial values of the generation bit correct.
 538          */
 539         for (i = 0; i < dd->ipath_pioavregs; i++) {
 540                 __le64 val;
 541
 542                 /*
 543                  * Chip Errata bug 6641; even and odd qwords>3 are swapped.
 544                  */
 545                 if (i > 3) {
 546                         if (i & 1)
 547                                 val = dd->ipath_pioavailregs_dma[i - 1];
 548                         else
 549                                 val = dd->ipath_pioavailregs_dma[i + 1];
 550                 }
 551                 else
 552                         val = dd->ipath_pioavailregs_dma[i];
 553                 dd->ipath_pioavailshadow[i] = le64_to_cpu(val);
 554         }
 555         /* can get counters, stats, etc. */
 556         dd->ipath_flags |= IPATH_PRESENT;
 557 }
 558
 559 static int init_housekeeping(struct ipath_devdata *dd,
 560                              struct ipath_portdata **pdp, int reinit)
 561 {
 562         char boardn[32];
 563         int ret = 0;
 564
 565         /*
 566          * have to clear shadow copies of registers at init that are
 567          * not otherwise set here, or all kinds of bizarre things
 568          * happen with driver on chip reset
 569          */
 570         dd->ipath_rcvhdrsize = 0;
 571
 572         /*
 573          * Don't clear ipath_flags as 8bit mode was set before
 574          * entering this func. However, we do set the linkstate to
 575          * unknown, so we can watch for a transition.
 576          * PRESENT is set because we want register reads to work,
 577          * and the kernel infrastructure saw it in config space;
 578          * We clear it if we have failures.
 579          */
 580         dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
 581         dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
 582                              IPATH_LINKDOWN | IPATH_LINKINIT);
 583
 584         ipath_cdbg(VERBOSE, "Try to read spc chip revision\n");
 585         dd->ipath_revision =
 586                 ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
 587
 588         /*
 589          * set up fundamental info we need to use the chip; we assume
 590          * if the revision reg and these regs are OK, we don't need to
 591          * special case the rest
 592          */
 593         dd->ipath_sregbase =
 594                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_sendregbase);
 595         dd->ipath_cregbase =
 596                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_counterregbase);
 597         dd->ipath_uregbase =
 598                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_userregbase);
 599         ipath_cdbg(VERBOSE, "ipath_kregbase %p, sendbase %x usrbase %x, "
 600                    "cntrbase %x\n", dd->ipath_kregbase, dd->ipath_sregbase,
 601                    dd->ipath_uregbase, dd->ipath_cregbase);
 602         if ((dd->ipath_revision & 0xffffffff) == 0xffffffff
 603             || (dd->ipath_sregbase & 0xffffffff) == 0xffffffff
 604             || (dd->ipath_cregbase & 0xffffffff) == 0xffffffff
 605             || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
 606                 ipath_dev_err(dd, "Register read failures from chip, "
 607                               "giving up initialization\n");
 608                 dd->ipath_flags &= ~IPATH_PRESENT;
 609                 ret = -ENODEV;
 610                 goto done;
 611         }
 612
 613
 614         /* clear diagctrl register, in case diags were running and crashed */
 615         ipath_write_kreg (dd, dd->ipath_kregs->kr_hwdiagctrl, 0);
 616
 617         /* clear the initial reset flag, in case first driver load */
 618         ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
 619                          INFINIPATH_E_RESET);
 620
 621         if (reinit)
 622                 ret = init_chip_reset(dd, pdp);
 623         else
 624                 ret = init_chip_first(dd, pdp);
 625
 626         if (ret)
 627                 goto done;
 628
 629         ipath_cdbg(VERBOSE, "Revision %llx (PCI %x), %u ports, %u tids, "
 630                    "%u egrtids\n", (unsigned long long) dd->ipath_revision,
 631                    dd->ipath_pcirev, dd->ipath_portcnt, dd->ipath_rcvtidcnt,
 632                    dd->ipath_rcvegrcnt);
 633
 634         if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) &
 635              INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) {
 636                 ipath_dev_err(dd, "Driver only handles version %d, "
 637                               "chip swversion is %d (%llx), failng\n",
 638                               IPATH_CHIP_SWVERSION,
 639                               (int)(dd->ipath_revision >>
 640                                     INFINIPATH_R_SOFTWARE_SHIFT) &
 641                               INFINIPATH_R_SOFTWARE_MASK,
 642                               (unsigned long long) dd->ipath_revision);
 643                 ret = -ENOSYS;
 644                 goto done;
 645         }
 646         dd->ipath_majrev = (u8) ((dd->ipath_revision >>
 647                                   INFINIPATH_R_CHIPREVMAJOR_SHIFT) &
 648                                  INFINIPATH_R_CHIPREVMAJOR_MASK);
 649         dd->ipath_minrev = (u8) ((dd->ipath_revision >>
 650                                   INFINIPATH_R_CHIPREVMINOR_SHIFT) &
 651                                  INFINIPATH_R_CHIPREVMINOR_MASK);
 652         dd->ipath_boardrev = (u8) ((dd->ipath_revision >>
 653                                     INFINIPATH_R_BOARDID_SHIFT) &
 654                                    INFINIPATH_R_BOARDID_MASK);
 655
 656         ret = dd->ipath_f_get_boardname(dd, boardn, sizeof boardn);
 657
 658         snprintf(dd->ipath_boardversion, sizeof(dd->ipath_boardversion),
 659                  "ChipABI %u.%u, %s, InfiniPath%u %u.%u, PCI %u, "
 660                  "SW Compat %u\n",
 661                  IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn,
 662                  (unsigned)(dd->ipath_revision >> INFINIPATH_R_ARCH_SHIFT) &
 663                  INFINIPATH_R_ARCH_MASK,
 664                  dd->ipath_majrev, dd->ipath_minrev, dd->ipath_pcirev,
 665                  (unsigned)(dd->ipath_revision >>
 666                             INFINIPATH_R_SOFTWARE_SHIFT) &
 667                  INFINIPATH_R_SOFTWARE_MASK);
 668
 669         ipath_dbg("%s", dd->ipath_boardversion);
 670
 671 done:
 672         return ret;
 673 }
 674
 675
 676 /**
 677  * ipath_init_chip - do the actual initialization sequence on the chip
 678  * @dd: the infinipath device
 679  * @reinit: reinitializing, so don't allocate new memory
 680  *
 681  * Do the actual initialization sequence on the chip.  This is done
 682  * both from the init routine called from the PCI infrastructure, and
 683  * when we reset the chip, or detect that it was reset internally,
 684  * or it's administratively re-enabled.
 685  *
 686  * Memory allocation here and in called routines is only done in
 687  * the first case (reinit == 0).  We have to be careful, because even
 688  * without memory allocation, we need to re-write all the chip registers
 689  * TIDs, etc. after the reset or enable has completed.
 690  */
 691 int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 692 {
 693         int ret = 0, i;
 694         u32 val32, kpiobufs;
 695         u32 piobufs, uports;
 696         u64 val;
 697         struct ipath_portdata *pd = NULL; /* keep gcc4 happy */
 698         gfp_t gfp_flags = GFP_USER | __GFP_COMP;
 699
 700         ret = init_housekeeping(dd, &pd, reinit);
 701         if (ret)
 702                 goto done;
 703
 704         /*
 705          * we ignore most issues after reporting them, but have to specially
 706          * handle hardware-disabled chips.
 707          */
 708         if (ret == 2) {
 709                 /* unique error, known to ipath_init_one */
 710                 ret = -EPERM;
 711                 goto done;
 712         }
 713
 714         /*
 715          * We could bump this to allow for full rcvegrcnt + rcvtidcnt,
 716          * but then it no longer nicely fits power of two, and since
 717          * we now use routines that backend onto __get_free_pages, the
 718          * rest would be wasted.
 719          */
 720         dd->ipath_rcvhdrcnt = dd->ipath_rcvegrcnt;
 721         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt,
 722                          dd->ipath_rcvhdrcnt);
 723
 724         /*
 725          * Set up the shadow copies of the piobufavail registers,
 726          * which we compare against the chip registers for now, and
 727          * the in memory DMA'ed copies of the registers.  This has to
 728          * be done early, before we calculate lastport, etc.
 729          */
 730         piobufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
 731         /*
 732          * calc number of pioavail registers, and save it; we have 2
 733          * bits per buffer.
 734          */
 735         dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2)
 736                 / (sizeof(u64) * BITS_PER_BYTE / 2);
 737         uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0;
 738         if (ipath_kpiobufs == 0) {
 739                 /* not set by user (this is default) */
 740                 if (piobufs > 144)
 741                         kpiobufs = 32;
 742                 else
 743                         kpiobufs = 16;
 744         }
 745         else
 746                 kpiobufs = ipath_kpiobufs;
 747
 748         if (kpiobufs + (uports * IPATH_MIN_USER_PORT_BUFCNT) > piobufs) {
 749                 i = (int) piobufs -
 750                         (int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
 751                 if (i < 0)
 752                         i = 0;
 753                 dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
 754                          "%d for kernel leaves too few for %d user ports "
 755                          "(%d each); using %u\n", kpiobufs,
 756                          piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i);
 757                 /*
 758                  * shouldn't change ipath_kpiobufs, because could be
 759                  * different for different devices...
 760                  */
 761                 kpiobufs = i;
 762         }
 763         dd->ipath_lastport_piobuf = piobufs - kpiobufs;
 764         dd->ipath_pbufsport =
 765                 uports ? dd->ipath_lastport_piobuf / uports : 0;
 766         val32 = dd->ipath_lastport_piobuf - (dd->ipath_pbufsport * uports);
 767         if (val32 > 0) {
 768                 ipath_dbg("allocating %u pbufs/port leaves %u unused, "
 769                           "add to kernel\n", dd->ipath_pbufsport, val32);
 770                 dd->ipath_lastport_piobuf -= val32;
 771                 ipath_dbg("%u pbufs/port leaves %u unused, add to kernel\n",
 772                           dd->ipath_pbufsport, val32);
 773         }
 774         dd->ipath_lastpioindex = dd->ipath_lastport_piobuf;
 775         ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
 776                    "each for %u user ports\n", kpiobufs,
 777                    piobufs, dd->ipath_pbufsport, uports);
 778
 779         dd->ipath_f_early_init(dd);
 780         /*
 781          * cancel any possible active sends from early driver load.
 782          * Follows early_init because some chips have to initialize
 783          * PIO buffers in early_init to avoid false parity errors.
 784          */
 785         ipath_cancel_sends(dd);
 786
 787         /* early_init sets rcvhdrentsize and rcvhdrsize, so this must be
 788          * done after early_init */
 789         dd->ipath_hdrqlast =
 790                 dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
 791         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize,
 792                          dd->ipath_rcvhdrentsize);
 793         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
 794                          dd->ipath_rcvhdrsize);
 795
 796         if (!reinit) {
 797                 ret = init_pioavailregs(dd);
 798                 init_shadow_tids(dd);
 799                 if (ret)
 800                         goto done;
 801         }
 802
 803         (void)ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
 804                                dd->ipath_pioavailregs_phys);
 805         /*
 806          * this is to detect s/w errors, which the h/w works around by
 807          * ignoring the low 6 bits of address, if it wasn't aligned.
 808          */
 809         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpioavailaddr);
 810         if (val != dd->ipath_pioavailregs_phys) {
 811                 ipath_dev_err(dd, "Catastrophic software error, "
 812                               "SendPIOAvailAddr written as %lx, "
 813                               "read back as %llx\n",
 814                               (unsigned long) dd->ipath_pioavailregs_phys,
 815                               (unsigned long long) val);
 816                 ret = -EINVAL;
 817                 goto done;
 818         }
 819
 820         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP);
 821
 822         /*
 823          * make sure we are not in freeze, and PIO send enabled, so
 824          * writes to pbc happen
 825          */
 826         ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, 0ULL);
 827         ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
 828                          ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
 829         ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
 830         ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 831                          INFINIPATH_S_PIOENABLE);
 832
 833         /*
 834          * before error clears, since we expect serdes pll errors during
 835          * this, the first time after reset
 836          */
 837         if (bringup_link(dd)) {
 838                 dev_info(&dd->pcidev->dev, "Failed to bringup IB link\n");
 839                 ret = -ENETDOWN;
 840                 goto done;
 841         }
 842
 843         /*
 844          * clear any "expected" hwerrs from reset and/or initialization
 845          * clear any that aren't enabled (at least this once), and then
 846          * set the enable mask
 847          */
 848         dd->ipath_f_init_hwerrors(dd);
 849         ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
 850                          ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
 851         ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
 852                          dd->ipath_hwerrmask);
 853
 854         dd->ipath_maskederrs = dd->ipath_ignorederrs;
 855         /* clear all */
 856         ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
 857         /* enable errors that are masked, at least this first time. */
 858         ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
 859                          ~dd->ipath_maskederrs);
 860         /* clear any interrups up to this point (ints still not enabled) */
 861         ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
 862
 863         /*
 864          * Set up the port 0 (kernel) rcvhdr q and egr TIDs.  If doing
 865          * re-init, the simplest way to handle this is to free
 866          * existing, and re-allocate.
 867          * Need to re-create rest of port 0 portdata as well.
 868          */
 869         if (reinit) {
 870                 /* Alloc and init new ipath_portdata for port0,
 871                  * Then free old pd. Could lead to fragmentation, but also
 872                  * makes later support for hot-swap easier.
 873                  */
 874                 struct ipath_portdata *npd;
 875                 npd = create_portdata0(dd);
 876                 if (npd) {
 877                         ipath_free_pddata(dd, pd);
 878                         dd->ipath_pd[0] = pd = npd;
 879                 } else {
 880                         ipath_dev_err(dd, "Unable to allocate portdata for"
 881                                       "  port 0, failing\n");
 882                         ret = -ENOMEM;
 883                         goto done;
 884                 }
 885         }
 886         dd->ipath_f_tidtemplate(dd);
 887         ret = ipath_create_rcvhdrq(dd, pd);
 888         if (!ret) {
 889                 dd->ipath_hdrqtailptr =
 890                         (volatile __le64 *)pd->port_rcvhdrtail_kvaddr;
 891                 ret = create_port0_egr(dd);
 892         }
 893         if (ret)
 894                 ipath_dev_err(dd, "failed to allocate port 0 (kernel) "
 895                               "rcvhdrq and/or egr bufs\n");
 896         else
 897                 enable_chip(dd, pd, reinit);
 898
 899
 900         if (!ret && !reinit) {
 901             /* used when we close a port, for DMA already in flight at close */
 902                 dd->ipath_dummy_hdrq = dma_alloc_coherent(
 903                         &dd->pcidev->dev, pd->port_rcvhdrq_size,
 904                         &dd->ipath_dummy_hdrq_phys,
 905                         gfp_flags);
 906                 if (!dd->ipath_dummy_hdrq ) {
 907                         dev_info(&dd->pcidev->dev,
 908                                 "Couldn't allocate 0x%lx bytes for dummy hdrq\n",
 909                                 pd->port_rcvhdrq_size);
 910                         /* fallback to just 0'ing */
 911                         dd->ipath_dummy_hdrq_phys = 0UL;
 912                 }
 913         }
 914
 915         /*
 916          * cause retrigger of pending interrupts ignored during init,
 917          * even if we had errors
 918          */
 919         ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
 920
 921         if(!dd->ipath_stats_timer_active) {
 922                 /*
 923                  * first init, or after an admin disable/enable
 924                  * set up stats retrieval timer, even if we had errors
 925                  * in last portion of setup
 926                  */
 927                 init_timer(&dd->ipath_stats_timer);
 928                 dd->ipath_stats_timer.function = ipath_get_faststats;
 929                 dd->ipath_stats_timer.data = (unsigned long) dd;
 930                 /* every 5 seconds; */
 931                 dd->ipath_stats_timer.expires = jiffies + 5 * HZ;
 932                 /* takes ~16 seconds to overflow at full IB 4x bandwdith */
 933                 add_timer(&dd->ipath_stats_timer);
 934                 dd->ipath_stats_timer_active = 1;
 935         }
 936
 937 done:
 938         if (!ret) {
 939                 *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
 940                 if (!dd->ipath_f_intrsetup(dd)) {
 941                         /* now we can enable all interrupts from the chip */
 942                         ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
 943                                          -1LL);
 944                         /* force re-interrupt of any pending interrupts. */
 945                         ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear,
 946                                          0ULL);
 947                         /* chip is usable; mark it as initialized */
 948                         *dd->ipath_statusp |= IPATH_STATUS_INITTED;
 949                 } else
 950                         ipath_dev_err(dd, "No interrupts enabled, couldn't "
 951                                       "setup interrupt address\n");
 952
 953                 if (dd->ipath_cfgports > ipath_stats.sps_nports)
 954                         /*
 955                          * sps_nports is a global, so, we set it to
 956                          * the highest number of ports of any of the
 957                          * chips we find; we never decrement it, at
 958                          * least for now.  Since this might have changed
 959                          * over disable/enable or prior to reset, always
 960                          * do the check and potentially adjust.
 961                          */
 962                         ipath_stats.sps_nports = dd->ipath_cfgports;
 963         } else
 964                 ipath_dbg("Failed (%d) to initialize chip\n", ret);
 965
 966         /* if ret is non-zero, we probably should do some cleanup
 967            here... */
 968         return ret;
 969 }
 970
 971 static int ipath_set_kpiobufs(const char *str, struct kernel_param *kp)
 972 {
 973         struct ipath_devdata *dd;
 974         unsigned long flags;
 975         unsigned short val;
 976         int ret;
 977
 978         ret = ipath_parse_ushort(str, &val);
 979
 980         spin_lock_irqsave(&ipath_devs_lock, flags);
 981
 982         if (ret < 0)
 983                 goto bail;
 984
 985         if (val == 0) {
 986                 ret = -EINVAL;
 987                 goto bail;
 988         }
 989
 990         list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
 991                 if (dd->ipath_kregbase)
 992                         continue;
 993                 if (val > (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
 994                            (dd->ipath_cfgports *
 995                             IPATH_MIN_USER_PORT_BUFCNT)))
 996                 {
 997                         ipath_dev_err(
 998                                 dd,
 999                                 "Allocating %d PIO bufs for kernel leaves "
1000                                 "too few for %d user ports (%d each)\n",
1001                                 val, dd->ipath_cfgports - 1,
1002                                 IPATH_MIN_USER_PORT_BUFCNT);
1003                         ret = -EINVAL;
1004                         goto bail;
1005                 }
1006                 dd->ipath_lastport_piobuf =
1007                         dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - val;
1008         }
1009
1010         ipath_kpiobufs = val;
1011         ret = 0;
1012 bail:
1013         spin_unlock_irqrestore(&ipath_devs_lock, flags);
1014
1015         return ret;
1016 }