1 /* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */
3 Written 1998-2001 by Donald Becker.
5 Current Maintainer: Roger Luethi <rl@hellgate.ch>
7 This software may be used and distributed according to the terms of
8 the GNU General Public License (GPL), incorporated herein by reference.
9 Drivers based on or derived from this code fall under the GPL and must
10 retain the authorship, copyright and license notice. This file is not
11 a complete program and may only be used when the entire operating
12 system is licensed under the GPL.
14 This driver is designed for the VIA VT86C100A Rhine-I.
15 It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM
16 and management NIC 6105M).
18 The author may be reached as becker@scyld.com, or C/O
19 Scyld Computing Corporation
20 410 Severn Ave., Suite 210
24 This driver contains some changes from the original Donald Becker
25 version. He may or may not be interested in bug reports on this
26 code. You can find his versions at:
27 http://www.scyld.com/network/via-rhine.html
28 [link no longer provides useful info -jgarzik]
32 #define DRV_NAME "via-rhine"
33 #define DRV_VERSION "1.4.3"
34 #define DRV_RELDATE "2007-03-06"
37 /* A few user-configurable values.
38 These may be modified when a driver module is loaded. */
40 static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
41 static int max_interrupt_work = 20;
43 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
44 Setting to > 1518 effectively disables this feature. */
45 static int rx_copybreak;
47 /* Work-around for broken BIOSes: they are unable to get the chip back out of
48 power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
52 * In case you are looking for 'options[]' or 'full_duplex[]', they
53 * are gone. Use ethtool(8) instead.
56 /* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
57 The Rhine has a 64 element 8390-like hash table. */
58 static const int multicast_filter_limit = 32;
61 /* Operational parameters that are set at compile time. */
63 /* Keep the ring sizes a power of two for compile efficiency.
64 The compiler will convert <unsigned>'%'<2^N> into a bit mask.
65 Making the Tx ring too large decreases the effectiveness of channel
66 bonding and packet priority.
67 There are no ill effects from too-large receive rings. */
68 #define TX_RING_SIZE 16
69 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
70 #ifdef CONFIG_VIA_RHINE_NAPI
71 #define RX_RING_SIZE 64
73 #define RX_RING_SIZE 16
77 /* Operational parameters that usually are not changed. */
79 /* Time in jiffies before concluding the transmitter is hung. */
80 #define TX_TIMEOUT (2*HZ)
82 #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
84 #include <linux/module.h>
85 #include <linux/moduleparam.h>
86 #include <linux/kernel.h>
87 #include <linux/string.h>
88 #include <linux/timer.h>
89 #include <linux/errno.h>
90 #include <linux/ioport.h>
91 #include <linux/slab.h>
92 #include <linux/interrupt.h>
93 #include <linux/pci.h>
94 #include <linux/dma-mapping.h>
95 #include <linux/netdevice.h>
96 #include <linux/etherdevice.h>
97 #include <linux/skbuff.h>
98 #include <linux/init.h>
99 #include <linux/delay.h>
100 #include <linux/mii.h>
101 #include <linux/ethtool.h>
102 #include <linux/crc32.h>
103 #include <linux/bitops.h>
104 #include <asm/processor.h> /* Processor type for cache alignment. */
107 #include <asm/uaccess.h>
108 #include <linux/dmi.h>
110 /* These identify the driver base version and may not be removed. */
111 static char version[] __devinitdata =
112 KERN_INFO DRV_NAME ".c:v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n";
114 /* This driver was written to use PCI memory space. Some early versions
115 of the Rhine may only work correctly with I/O space accesses. */
116 #ifdef CONFIG_VIA_RHINE_MMIO
121 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
122 MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
123 MODULE_LICENSE("GPL");
125 module_param(max_interrupt_work, int, 0);
126 module_param(debug, int, 0);
127 module_param(rx_copybreak, int, 0);
128 module_param(avoid_D3, bool, 0);
129 MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
130 MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
131 MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
132 MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
137 I. Board Compatibility
139 This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
142 II. Board-specific settings
144 Boards with this chip are functional only in a bus-master PCI slot.
146 Many operational settings are loaded from the EEPROM to the Config word at
147 offset 0x78. For most of these settings, this driver assumes that they are
149 If this driver is compiled to use PCI memory space operations the EEPROM
150 must be configured to enable memory ops.
152 III. Driver operation
156 This driver uses two statically allocated fixed-size descriptor lists
157 formed into rings by a branch from the final descriptor to the beginning of
158 the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
160 IIIb/c. Transmit/Receive Structure
162 This driver attempts to use a zero-copy receive and transmit scheme.
164 Alas, all data buffers are required to start on a 32 bit boundary, so
165 the driver must often copy transmit packets into bounce buffers.
167 The driver allocates full frame size skbuffs for the Rx ring buffers at
168 open() time and passes the skb->data field to the chip as receive data
169 buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
170 a fresh skbuff is allocated and the frame is copied to the new skbuff.
171 When the incoming frame is larger, the skbuff is passed directly up the
172 protocol stack. Buffers consumed this way are replaced by newly allocated
173 skbuffs in the last phase of rhine_rx().
175 The RX_COPYBREAK value is chosen to trade-off the memory wasted by
176 using a full-sized skbuff for small frames vs. the copying costs of larger
177 frames. New boards are typically used in generously configured machines
178 and the underfilled buffers have negligible impact compared to the benefit of
179 a single allocation size, so the default value of zero results in never
180 copying packets. When copying is done, the cost is usually mitigated by using
181 a combined copy/checksum routine. Copying also preloads the cache, which is
182 most useful with small frames.
184 Since the VIA chips are only able to transfer data to buffers on 32 bit
185 boundaries, the IP header at offset 14 in an ethernet frame isn't
186 longword aligned for further processing. Copying these unaligned buffers
187 has the beneficial effect of 16-byte aligning the IP header.
189 IIId. Synchronization
191 The driver runs as two independent, single-threaded flows of control. One
192 is the send-packet routine, which enforces single-threaded use by the
193 dev->priv->lock spinlock. The other thread is the interrupt handler, which
194 is single threaded by the hardware and interrupt handling software.
196 The send packet thread has partial control over the Tx ring. It locks the
197 dev->priv->lock whenever it's queuing a Tx packet. If the next slot in the ring
198 is not available it stops the transmit queue by calling netif_stop_queue.
200 The interrupt handler has exclusive control over the Rx ring and records stats
201 from the Tx ring. After reaping the stats, it marks the Tx queue entry as
202 empty by incrementing the dirty_tx mark. If at least half of the entries in
203 the Rx ring are available the transmit queue is woken up if it was stopped.
209 Preliminary VT86C100A manual from http://www.via.com.tw/
210 http://www.scyld.com/expert/100mbps.html
211 http://www.scyld.com/expert/NWay.html
212 ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf
213 ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF
218 The VT86C100A manual is not reliable information.
219 The 3043 chip does not handle unaligned transmit or receive buffers, resulting
220 in significant performance degradation for bounce buffer copies on transmit
221 and unaligned IP headers on receive.
222 The chip does not pad to minimum transmit length.
227 /* This table drives the PCI probe routines. It's mostly boilerplate in all
228 of the drivers, and will likely be provided by some future kernel.
229 Note the matching code -- the first table entry matchs all 56** cards but
230 second only the 1234 card.
237 VT8231 = 0x50, /* Integrated MAC */
238 VT8233 = 0x60, /* Integrated MAC */
239 VT8235 = 0x74, /* Integrated MAC */
240 VT8237 = 0x78, /* Integrated MAC */
247 VT6105M = 0x90, /* Management adapter */
251 rqWOL = 0x0001, /* Wake-On-LAN support */
252 rqForceReset = 0x0002,
253 rq6patterns = 0x0040, /* 6 instead of 4 patterns for WOL */
254 rqStatusWBRace = 0x0080, /* Tx Status Writeback Error possible */
255 rqRhineI = 0x0100, /* See comment below */
258 * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable
259 * MMIO as well as for the collision counter and the Tx FIFO underflow
260 * indicator. In addition, Tx and Rx buffers need to 4 byte aligned.
263 /* Beware of PCI posted writes */
264 #define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0)
266 static const struct pci_device_id rhine_pci_tbl[] = {
267 { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */
268 { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */
269 { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */
270 { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */
271 { } /* terminate list */
273 MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
276 /* Offsets to the device registers. */
277 enum register_offsets {
278 StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
280 IntrStatus=0x0C, IntrEnable=0x0E,
281 MulticastFilter0=0x10, MulticastFilter1=0x14,
282 RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
283 MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E,
284 MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
285 ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
286 RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
287 StickyHW=0x83, IntrStatus2=0x84,
288 WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4,
289 WOLcrClr1=0xA6, WOLcgClr=0xA7,
290 PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD,
293 /* Bits in ConfigD */
295 BackOptional=0x01, BackModify=0x02,
296 BackCaptureEffect=0x04, BackRandom=0x08
300 /* Registers we check that mmio and reg are the same. */
301 static const int mmio_verify_registers[] = {
302 RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD,
307 /* Bits in the interrupt status/mask registers. */
308 enum intr_status_bits {
309 IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
310 IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
312 IntrStatsMax=0x0080, IntrRxEarly=0x0100,
313 IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
314 IntrTxAborted=0x2000, IntrLinkChange=0x4000,
316 IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
317 IntrTxDescRace=0x080000, /* mapped from IntrStatus2 */
318 IntrTxErrSummary=0x082218,
321 /* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */
330 /* The Rx and Tx buffer descriptors. */
333 u32 desc_length; /* Chain flag, Buffer/frame length */
339 u32 desc_length; /* Chain flag, Tx Config, Frame length */
344 /* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */
345 #define TXDESC 0x00e08000
347 enum rx_status_bits {
348 RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F
351 /* Bits in *_desc.*_status */
352 enum desc_status_bits {
356 /* Bits in ChipCmd. */
358 CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08,
359 CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40,
360 Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04,
361 Cmd1NoTxPoll=0x08, Cmd1Reset=0x80,
364 struct rhine_private {
365 /* Descriptor rings */
366 struct rx_desc *rx_ring;
367 struct tx_desc *tx_ring;
368 dma_addr_t rx_ring_dma;
369 dma_addr_t tx_ring_dma;
371 /* The addresses of receive-in-place skbuffs. */
372 struct sk_buff *rx_skbuff[RX_RING_SIZE];
373 dma_addr_t rx_skbuff_dma[RX_RING_SIZE];
375 /* The saved address of a sent-in-place packet/buffer, for later free(). */
376 struct sk_buff *tx_skbuff[TX_RING_SIZE];
377 dma_addr_t tx_skbuff_dma[TX_RING_SIZE];
379 /* Tx bounce buffers (Rhine-I only) */
380 unsigned char *tx_buf[TX_RING_SIZE];
381 unsigned char *tx_bufs;
382 dma_addr_t tx_bufs_dma;
384 struct pci_dev *pdev;
386 struct net_device_stats stats;
389 /* Frequently used values: keep some adjacent for cache effect. */
391 struct rx_desc *rx_head_desc;
392 unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
393 unsigned int cur_tx, dirty_tx;
394 unsigned int rx_buf_sz; /* Based on MTU+slack. */
397 u8 tx_thresh, rx_thresh;
399 struct mii_if_info mii_if;
403 static int mdio_read(struct net_device *dev, int phy_id, int location);
404 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
405 static int rhine_open(struct net_device *dev);
406 static void rhine_tx_timeout(struct net_device *dev);
407 static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
408 static irqreturn_t rhine_interrupt(int irq, void *dev_instance);
409 static void rhine_tx(struct net_device *dev);
410 static int rhine_rx(struct net_device *dev, int limit);
411 static void rhine_error(struct net_device *dev, int intr_status);
412 static void rhine_set_rx_mode(struct net_device *dev);
413 static struct net_device_stats *rhine_get_stats(struct net_device *dev);
414 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
415 static const struct ethtool_ops netdev_ethtool_ops;
416 static int rhine_close(struct net_device *dev);
417 static void rhine_shutdown (struct pci_dev *pdev);
419 #define RHINE_WAIT_FOR(condition) do { \
421 while (!(condition) && --i) \
423 if (debug > 1 && i < 512) \
424 printk(KERN_INFO "%s: %4d cycles used @ %s:%d\n", \
425 DRV_NAME, 1024-i, __func__, __LINE__); \
428 static inline u32 get_intr_status(struct net_device *dev)
430 struct rhine_private *rp = netdev_priv(dev);
431 void __iomem *ioaddr = rp->base;
434 intr_status = ioread16(ioaddr + IntrStatus);
435 /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
436 if (rp->quirks & rqStatusWBRace)
437 intr_status |= ioread8(ioaddr + IntrStatus2) << 16;
442 * Get power related registers into sane state.
443 * Notify user about past WOL event.
445 static void rhine_power_init(struct net_device *dev)
447 struct rhine_private *rp = netdev_priv(dev);
448 void __iomem *ioaddr = rp->base;
451 if (rp->quirks & rqWOL) {
452 /* Make sure chip is in power state D0 */
453 iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW);
455 /* Disable "force PME-enable" */
456 iowrite8(0x80, ioaddr + WOLcgClr);
458 /* Clear power-event config bits (WOL) */
459 iowrite8(0xFF, ioaddr + WOLcrClr);
460 /* More recent cards can manage two additional patterns */
461 if (rp->quirks & rq6patterns)
462 iowrite8(0x03, ioaddr + WOLcrClr1);
464 /* Save power-event status bits */
465 wolstat = ioread8(ioaddr + PwrcsrSet);
466 if (rp->quirks & rq6patterns)
467 wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8;
469 /* Clear power-event status bits */
470 iowrite8(0xFF, ioaddr + PwrcsrClr);
471 if (rp->quirks & rq6patterns)
472 iowrite8(0x03, ioaddr + PwrcsrClr1);
478 reason = "Magic packet";
481 reason = "Link went up";
484 reason = "Link went down";
487 reason = "Unicast packet";
490 reason = "Multicast/broadcast packet";
495 printk(KERN_INFO "%s: Woke system up. Reason: %s.\n",
501 static void rhine_chip_reset(struct net_device *dev)
503 struct rhine_private *rp = netdev_priv(dev);
504 void __iomem *ioaddr = rp->base;
506 iowrite8(Cmd1Reset, ioaddr + ChipCmd1);
509 if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
510 printk(KERN_INFO "%s: Reset not complete yet. "
511 "Trying harder.\n", DRV_NAME);
514 if (rp->quirks & rqForceReset)
515 iowrite8(0x40, ioaddr + MiscCmd);
517 /* Reset can take somewhat longer (rare) */
518 RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset));
522 printk(KERN_INFO "%s: Reset %s.\n", dev->name,
523 (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
524 "failed" : "succeeded");
528 static void enable_mmio(long pioaddr, u32 quirks)
531 if (quirks & rqRhineI) {
532 /* More recent docs say that this bit is reserved ... */
533 n = inb(pioaddr + ConfigA) | 0x20;
534 outb(n, pioaddr + ConfigA);
536 n = inb(pioaddr + ConfigD) | 0x80;
537 outb(n, pioaddr + ConfigD);
543 * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM
544 * (plus 0x6C for Rhine-I/II)
546 static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev)
548 struct rhine_private *rp = netdev_priv(dev);
549 void __iomem *ioaddr = rp->base;
551 outb(0x20, pioaddr + MACRegEEcsr);
552 RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20));
556 * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable
557 * MMIO. If reloading EEPROM was done first this could be avoided, but
558 * it is not known if that still works with the "win98-reboot" problem.
560 enable_mmio(pioaddr, rp->quirks);
563 /* Turn off EEPROM-controlled wake-up (magic packet) */
564 if (rp->quirks & rqWOL)
565 iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA);
569 #ifdef CONFIG_NET_POLL_CONTROLLER
570 static void rhine_poll(struct net_device *dev)
572 disable_irq(dev->irq);
573 rhine_interrupt(dev->irq, (void *)dev);
574 enable_irq(dev->irq);
578 #ifdef CONFIG_VIA_RHINE_NAPI
579 static int rhine_napipoll(struct net_device *dev, int *budget)
581 struct rhine_private *rp = netdev_priv(dev);
582 void __iomem *ioaddr = rp->base;
583 int done, limit = min(dev->quota, *budget);
585 done = rhine_rx(dev, limit);
590 netif_rx_complete(dev);
592 iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
593 IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
594 IntrTxDone | IntrTxError | IntrTxUnderrun |
595 IntrPCIErr | IntrStatsMax | IntrLinkChange,
596 ioaddr + IntrEnable);
604 static void rhine_hw_init(struct net_device *dev, long pioaddr)
606 struct rhine_private *rp = netdev_priv(dev);
608 /* Reset the chip to erase previous misconfiguration. */
609 rhine_chip_reset(dev);
611 /* Rhine-I needs extra time to recuperate before EEPROM reload */
612 if (rp->quirks & rqRhineI)
615 /* Reload EEPROM controlled bytes cleared by soft reset */
616 rhine_reload_eeprom(pioaddr, dev);
619 static int __devinit rhine_init_one(struct pci_dev *pdev,
620 const struct pci_device_id *ent)
622 struct net_device *dev;
623 struct rhine_private *rp;
628 void __iomem *ioaddr;
637 /* when built into the kernel, we only print version if device is found */
639 static int printed_version;
640 if (!printed_version++)
648 if (pdev->revision < VTunknown0) {
652 else if (pdev->revision >= VT6102) {
653 quirks = rqWOL | rqForceReset;
654 if (pdev->revision < VT6105) {
656 quirks |= rqStatusWBRace; /* Rhine-II exclusive */
659 phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */
660 if (pdev->revision >= VT6105_B0)
661 quirks |= rq6patterns;
662 if (pdev->revision < VT6105M)
665 name = "Rhine III (Management Adapter)";
669 rc = pci_enable_device(pdev);
673 /* this should always be supported */
674 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
676 printk(KERN_ERR "32-bit PCI DMA addresses not supported by "
682 if ((pci_resource_len(pdev, 0) < io_size) ||
683 (pci_resource_len(pdev, 1) < io_size)) {
685 printk(KERN_ERR "Insufficient PCI resources, aborting\n");
689 pioaddr = pci_resource_start(pdev, 0);
690 memaddr = pci_resource_start(pdev, 1);
692 pci_set_master(pdev);
694 dev = alloc_etherdev(sizeof(struct rhine_private));
697 printk(KERN_ERR "alloc_etherdev failed\n");
700 SET_MODULE_OWNER(dev);
701 SET_NETDEV_DEV(dev, &pdev->dev);
703 rp = netdev_priv(dev);
705 rp->pioaddr = pioaddr;
708 rc = pci_request_regions(pdev, DRV_NAME);
710 goto err_out_free_netdev;
712 ioaddr = pci_iomap(pdev, bar, io_size);
715 printk(KERN_ERR "ioremap failed for device %s, region 0x%X "
716 "@ 0x%lX\n", pci_name(pdev), io_size, memaddr);
717 goto err_out_free_res;
721 enable_mmio(pioaddr, quirks);
723 /* Check that selected MMIO registers match the PIO ones */
725 while (mmio_verify_registers[i]) {
726 int reg = mmio_verify_registers[i++];
727 unsigned char a = inb(pioaddr+reg);
728 unsigned char b = readb(ioaddr+reg);
731 printk(KERN_ERR "MMIO do not match PIO [%02x] "
732 "(%02x != %02x)\n", reg, a, b);
736 #endif /* USE_MMIO */
738 dev->base_addr = (unsigned long)ioaddr;
741 /* Get chip registers into a sane state */
742 rhine_power_init(dev);
743 rhine_hw_init(dev, pioaddr);
745 for (i = 0; i < 6; i++)
746 dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
747 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
749 if (!is_valid_ether_addr(dev->perm_addr)) {
751 printk(KERN_ERR "Invalid MAC address\n");
755 /* For Rhine-I/II, phy_id is loaded from EEPROM */
757 phy_id = ioread8(ioaddr + 0x6C);
759 dev->irq = pdev->irq;
761 spin_lock_init(&rp->lock);
762 rp->mii_if.dev = dev;
763 rp->mii_if.mdio_read = mdio_read;
764 rp->mii_if.mdio_write = mdio_write;
765 rp->mii_if.phy_id_mask = 0x1f;
766 rp->mii_if.reg_num_mask = 0x1f;
768 /* The chip-specific entries in the device structure. */
769 dev->open = rhine_open;
770 dev->hard_start_xmit = rhine_start_tx;
771 dev->stop = rhine_close;
772 dev->get_stats = rhine_get_stats;
773 dev->set_multicast_list = rhine_set_rx_mode;
774 dev->do_ioctl = netdev_ioctl;
775 dev->ethtool_ops = &netdev_ethtool_ops;
776 dev->tx_timeout = rhine_tx_timeout;
777 dev->watchdog_timeo = TX_TIMEOUT;
778 #ifdef CONFIG_NET_POLL_CONTROLLER
779 dev->poll_controller = rhine_poll;
781 #ifdef CONFIG_VIA_RHINE_NAPI
782 dev->poll = rhine_napipoll;
785 if (rp->quirks & rqRhineI)
786 dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
788 /* dev->name not defined before register_netdev()! */
789 rc = register_netdev(dev);
793 printk(KERN_INFO "%s: VIA %s at 0x%lx, ",
802 for (i = 0; i < 5; i++)
803 printk("%2.2x:", dev->dev_addr[i]);
804 printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], pdev->irq);
806 pci_set_drvdata(pdev, dev);
810 int mii_status = mdio_read(dev, phy_id, 1);
811 mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE;
812 mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
813 if (mii_status != 0xffff && mii_status != 0x0000) {
814 rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
815 printk(KERN_INFO "%s: MII PHY found at address "
816 "%d, status 0x%4.4x advertising %4.4x "
817 "Link %4.4x.\n", dev->name, phy_id,
818 mii_status, rp->mii_if.advertising,
819 mdio_read(dev, phy_id, 5));
821 /* set IFF_RUNNING */
822 if (mii_status & BMSR_LSTATUS)
823 netif_carrier_on(dev);
825 netif_carrier_off(dev);
829 rp->mii_if.phy_id = phy_id;
830 if (debug > 1 && avoid_D3)
831 printk(KERN_INFO "%s: No D3 power state at shutdown.\n",
837 pci_iounmap(pdev, ioaddr);
839 pci_release_regions(pdev);
846 static int alloc_ring(struct net_device* dev)
848 struct rhine_private *rp = netdev_priv(dev);
852 ring = pci_alloc_consistent(rp->pdev,
853 RX_RING_SIZE * sizeof(struct rx_desc) +
854 TX_RING_SIZE * sizeof(struct tx_desc),
857 printk(KERN_ERR "Could not allocate DMA memory.\n");
860 if (rp->quirks & rqRhineI) {
861 rp->tx_bufs = pci_alloc_consistent(rp->pdev,
862 PKT_BUF_SZ * TX_RING_SIZE,
864 if (rp->tx_bufs == NULL) {
865 pci_free_consistent(rp->pdev,
866 RX_RING_SIZE * sizeof(struct rx_desc) +
867 TX_RING_SIZE * sizeof(struct tx_desc),
874 rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc);
875 rp->rx_ring_dma = ring_dma;
876 rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc);
881 static void free_ring(struct net_device* dev)
883 struct rhine_private *rp = netdev_priv(dev);
885 pci_free_consistent(rp->pdev,
886 RX_RING_SIZE * sizeof(struct rx_desc) +
887 TX_RING_SIZE * sizeof(struct tx_desc),
888 rp->rx_ring, rp->rx_ring_dma);
892 pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE,
893 rp->tx_bufs, rp->tx_bufs_dma);
899 static void alloc_rbufs(struct net_device *dev)
901 struct rhine_private *rp = netdev_priv(dev);
905 rp->dirty_rx = rp->cur_rx = 0;
907 rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
908 rp->rx_head_desc = &rp->rx_ring[0];
909 next = rp->rx_ring_dma;
911 /* Init the ring entries */
912 for (i = 0; i < RX_RING_SIZE; i++) {
913 rp->rx_ring[i].rx_status = 0;
914 rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz);
915 next += sizeof(struct rx_desc);
916 rp->rx_ring[i].next_desc = cpu_to_le32(next);
917 rp->rx_skbuff[i] = NULL;
919 /* Mark the last entry as wrapping the ring. */
920 rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma);
922 /* Fill in the Rx buffers. Handle allocation failure gracefully. */
923 for (i = 0; i < RX_RING_SIZE; i++) {
924 struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
925 rp->rx_skbuff[i] = skb;
928 skb->dev = dev; /* Mark as being used by this device. */
930 rp->rx_skbuff_dma[i] =
931 pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz,
934 rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]);
935 rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn);
937 rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
940 static void free_rbufs(struct net_device* dev)
942 struct rhine_private *rp = netdev_priv(dev);
945 /* Free all the skbuffs in the Rx queue. */
946 for (i = 0; i < RX_RING_SIZE; i++) {
947 rp->rx_ring[i].rx_status = 0;
948 rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
949 if (rp->rx_skbuff[i]) {
950 pci_unmap_single(rp->pdev,
951 rp->rx_skbuff_dma[i],
952 rp->rx_buf_sz, PCI_DMA_FROMDEVICE);
953 dev_kfree_skb(rp->rx_skbuff[i]);
955 rp->rx_skbuff[i] = NULL;
959 static void alloc_tbufs(struct net_device* dev)
961 struct rhine_private *rp = netdev_priv(dev);
965 rp->dirty_tx = rp->cur_tx = 0;
966 next = rp->tx_ring_dma;
967 for (i = 0; i < TX_RING_SIZE; i++) {
968 rp->tx_skbuff[i] = NULL;
969 rp->tx_ring[i].tx_status = 0;
970 rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
971 next += sizeof(struct tx_desc);
972 rp->tx_ring[i].next_desc = cpu_to_le32(next);
973 if (rp->quirks & rqRhineI)
974 rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
976 rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
980 static void free_tbufs(struct net_device* dev)
982 struct rhine_private *rp = netdev_priv(dev);
985 for (i = 0; i < TX_RING_SIZE; i++) {
986 rp->tx_ring[i].tx_status = 0;
987 rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
988 rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
989 if (rp->tx_skbuff[i]) {
990 if (rp->tx_skbuff_dma[i]) {
991 pci_unmap_single(rp->pdev,
992 rp->tx_skbuff_dma[i],
993 rp->tx_skbuff[i]->len,
996 dev_kfree_skb(rp->tx_skbuff[i]);
998 rp->tx_skbuff[i] = NULL;
999 rp->tx_buf[i] = NULL;
1003 static void rhine_check_media(struct net_device *dev, unsigned int init_media)
1005 struct rhine_private *rp = netdev_priv(dev);
1006 void __iomem *ioaddr = rp->base;
1008 mii_check_media(&rp->mii_if, debug, init_media);
1010 if (rp->mii_if.full_duplex)
1011 iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex,
1014 iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
1017 printk(KERN_INFO "%s: force_media %d, carrier %d\n", dev->name,
1018 rp->mii_if.force_media, netif_carrier_ok(dev));
1021 /* Called after status of force_media possibly changed */
1022 static void rhine_set_carrier(struct mii_if_info *mii)
1024 if (mii->force_media) {
1025 /* autoneg is off: Link is always assumed to be up */
1026 if (!netif_carrier_ok(mii->dev))
1027 netif_carrier_on(mii->dev);
1029 else /* Let MMI library update carrier status */
1030 rhine_check_media(mii->dev, 0);
1032 printk(KERN_INFO "%s: force_media %d, carrier %d\n",
1033 mii->dev->name, mii->force_media,
1034 netif_carrier_ok(mii->dev));
1037 static void init_registers(struct net_device *dev)
1039 struct rhine_private *rp = netdev_priv(dev);
1040 void __iomem *ioaddr = rp->base;
1043 for (i = 0; i < 6; i++)
1044 iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
1046 /* Initialize other registers. */
1047 iowrite16(0x0006, ioaddr + PCIBusConfig); /* Tune configuration??? */
1048 /* Configure initial FIFO thresholds. */
1049 iowrite8(0x20, ioaddr + TxConfig);
1050 rp->tx_thresh = 0x20;
1051 rp->rx_thresh = 0x60; /* Written in rhine_set_rx_mode(). */
1053 iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr);
1054 iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr);
1056 rhine_set_rx_mode(dev);
1058 netif_poll_enable(dev);
1060 /* Enable interrupts by setting the interrupt mask. */
1061 iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
1062 IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
1063 IntrTxDone | IntrTxError | IntrTxUnderrun |
1064 IntrPCIErr | IntrStatsMax | IntrLinkChange,
1065 ioaddr + IntrEnable);
1067 iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8),
1069 rhine_check_media(dev, 1);
1072 /* Enable MII link status auto-polling (required for IntrLinkChange) */
1073 static void rhine_enable_linkmon(void __iomem *ioaddr)
1075 iowrite8(0, ioaddr + MIICmd);
1076 iowrite8(MII_BMSR, ioaddr + MIIRegAddr);
1077 iowrite8(0x80, ioaddr + MIICmd);
1079 RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20));
1081 iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr);
1084 /* Disable MII link status auto-polling (required for MDIO access) */
1085 static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
1087 iowrite8(0, ioaddr + MIICmd);
1089 if (quirks & rqRhineI) {
1090 iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
1092 /* Can be called from ISR. Evil. */
1095 /* 0x80 must be set immediately before turning it off */
1096 iowrite8(0x80, ioaddr + MIICmd);
1098 RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20);
1100 /* Heh. Now clear 0x80 again. */
1101 iowrite8(0, ioaddr + MIICmd);
1104 RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80);
1107 /* Read and write over the MII Management Data I/O (MDIO) interface. */
1109 static int mdio_read(struct net_device *dev, int phy_id, int regnum)
1111 struct rhine_private *rp = netdev_priv(dev);
1112 void __iomem *ioaddr = rp->base;
1115 rhine_disable_linkmon(ioaddr, rp->quirks);
1117 /* rhine_disable_linkmon already cleared MIICmd */
1118 iowrite8(phy_id, ioaddr + MIIPhyAddr);
1119 iowrite8(regnum, ioaddr + MIIRegAddr);
1120 iowrite8(0x40, ioaddr + MIICmd); /* Trigger read */
1121 RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40));
1122 result = ioread16(ioaddr + MIIData);
1124 rhine_enable_linkmon(ioaddr);
1128 static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value)
1130 struct rhine_private *rp = netdev_priv(dev);
1131 void __iomem *ioaddr = rp->base;
1133 rhine_disable_linkmon(ioaddr, rp->quirks);
1135 /* rhine_disable_linkmon already cleared MIICmd */
1136 iowrite8(phy_id, ioaddr + MIIPhyAddr);
1137 iowrite8(regnum, ioaddr + MIIRegAddr);
1138 iowrite16(value, ioaddr + MIIData);
1139 iowrite8(0x20, ioaddr + MIICmd); /* Trigger write */
1140 RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20));
1142 rhine_enable_linkmon(ioaddr);
1145 static int rhine_open(struct net_device *dev)
1147 struct rhine_private *rp = netdev_priv(dev);
1148 void __iomem *ioaddr = rp->base;
1151 rc = request_irq(rp->pdev->irq, &rhine_interrupt, IRQF_SHARED, dev->name,
1157 printk(KERN_DEBUG "%s: rhine_open() irq %d.\n",
1158 dev->name, rp->pdev->irq);
1160 rc = alloc_ring(dev);
1162 free_irq(rp->pdev->irq, dev);
1167 rhine_chip_reset(dev);
1168 init_registers(dev);
1170 printk(KERN_DEBUG "%s: Done rhine_open(), status %4.4x "
1171 "MII status: %4.4x.\n",
1172 dev->name, ioread16(ioaddr + ChipCmd),
1173 mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
1175 netif_start_queue(dev);
1180 static void rhine_tx_timeout(struct net_device *dev)
1182 struct rhine_private *rp = netdev_priv(dev);
1183 void __iomem *ioaddr = rp->base;
1185 printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
1186 "%4.4x, resetting...\n",
1187 dev->name, ioread16(ioaddr + IntrStatus),
1188 mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
1190 /* protect against concurrent rx interrupts */
1191 disable_irq(rp->pdev->irq);
1193 spin_lock(&rp->lock);
1195 /* clear all descriptors */
1201 /* Reinitialize the hardware. */
1202 rhine_chip_reset(dev);
1203 init_registers(dev);
1205 spin_unlock(&rp->lock);
1206 enable_irq(rp->pdev->irq);
1208 dev->trans_start = jiffies;
1209 rp->stats.tx_errors++;
1210 netif_wake_queue(dev);
1213 static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
1215 struct rhine_private *rp = netdev_priv(dev);
1216 void __iomem *ioaddr = rp->base;
1219 /* Caution: the write order is important here, set the field
1220 with the "ownership" bits last. */
1222 /* Calculate the next Tx descriptor entry. */
1223 entry = rp->cur_tx % TX_RING_SIZE;
1225 if (skb_padto(skb, ETH_ZLEN))
1228 rp->tx_skbuff[entry] = skb;
1230 if ((rp->quirks & rqRhineI) &&
1231 (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) {
1232 /* Must use alignment buffer. */
1233 if (skb->len > PKT_BUF_SZ) {
1234 /* packet too long, drop it */
1236 rp->tx_skbuff[entry] = NULL;
1237 rp->stats.tx_dropped++;
1241 /* Padding is not copied and so must be redone. */
1242 skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
1243 if (skb->len < ETH_ZLEN)
1244 memset(rp->tx_buf[entry] + skb->len, 0,
1245 ETH_ZLEN - skb->len);
1246 rp->tx_skbuff_dma[entry] = 0;
1247 rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
1248 (rp->tx_buf[entry] -
1251 rp->tx_skbuff_dma[entry] =
1252 pci_map_single(rp->pdev, skb->data, skb->len,
1254 rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]);
1257 rp->tx_ring[entry].desc_length =
1258 cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
1261 spin_lock_irq(&rp->lock);
1263 rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
1268 /* Non-x86 Todo: explicitly flush cache lines here. */
1270 /* Wake the potentially-idle transmit channel */
1271 iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
1275 if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN)
1276 netif_stop_queue(dev);
1278 dev->trans_start = jiffies;
1280 spin_unlock_irq(&rp->lock);
1283 printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
1284 dev->name, rp->cur_tx-1, entry);
1289 /* The interrupt handler does all of the Rx thread work and cleans up
1290 after the Tx thread. */
1291 static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
1293 struct net_device *dev = dev_instance;
1294 struct rhine_private *rp = netdev_priv(dev);
1295 void __iomem *ioaddr = rp->base;
1297 int boguscnt = max_interrupt_work;
1300 while ((intr_status = get_intr_status(dev))) {
1303 /* Acknowledge all of the current interrupt sources ASAP. */
1304 if (intr_status & IntrTxDescRace)
1305 iowrite8(0x08, ioaddr + IntrStatus2);
1306 iowrite16(intr_status & 0xffff, ioaddr + IntrStatus);
1310 printk(KERN_DEBUG "%s: Interrupt, status %8.8x.\n",
1311 dev->name, intr_status);
1313 if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
1314 IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
1315 #ifdef CONFIG_VIA_RHINE_NAPI
1316 iowrite16(IntrTxAborted |
1317 IntrTxDone | IntrTxError | IntrTxUnderrun |
1318 IntrPCIErr | IntrStatsMax | IntrLinkChange,
1319 ioaddr + IntrEnable);
1321 netif_rx_schedule(dev);
1323 rhine_rx(dev, RX_RING_SIZE);
1327 if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
1328 if (intr_status & IntrTxErrSummary) {
1329 /* Avoid scavenging before Tx engine turned off */
1330 RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn));
1332 ioread8(ioaddr+ChipCmd) & CmdTxOn)
1333 printk(KERN_WARNING "%s: "
1334 "rhine_interrupt() Tx engine"
1335 "still on.\n", dev->name);
1340 /* Abnormal error summary/uncommon events handlers. */
1341 if (intr_status & (IntrPCIErr | IntrLinkChange |
1342 IntrStatsMax | IntrTxError | IntrTxAborted |
1343 IntrTxUnderrun | IntrTxDescRace))
1344 rhine_error(dev, intr_status);
1346 if (--boguscnt < 0) {
1347 printk(KERN_WARNING "%s: Too much work at interrupt, "
1349 dev->name, intr_status);
1355 printk(KERN_DEBUG "%s: exiting interrupt, status=%8.8x.\n",
1356 dev->name, ioread16(ioaddr + IntrStatus));
1357 return IRQ_RETVAL(handled);
1360 /* This routine is logically part of the interrupt handler, but isolated
1362 static void rhine_tx(struct net_device *dev)
1364 struct rhine_private *rp = netdev_priv(dev);
1365 int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE;
1367 spin_lock(&rp->lock);
1369 /* find and cleanup dirty tx descriptors */
1370 while (rp->dirty_tx != rp->cur_tx) {
1371 txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
1373 printk(KERN_DEBUG "Tx scavenge %d status %8.8x.\n",
1375 if (txstatus & DescOwn)
1377 if (txstatus & 0x8000) {
1379 printk(KERN_DEBUG "%s: Transmit error, "
1380 "Tx status %8.8x.\n",
1381 dev->name, txstatus);
1382 rp->stats.tx_errors++;
1383 if (txstatus & 0x0400) rp->stats.tx_carrier_errors++;
1384 if (txstatus & 0x0200) rp->stats.tx_window_errors++;
1385 if (txstatus & 0x0100) rp->stats.tx_aborted_errors++;
1386 if (txstatus & 0x0080) rp->stats.tx_heartbeat_errors++;
1387 if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
1388 (txstatus & 0x0800) || (txstatus & 0x1000)) {
1389 rp->stats.tx_fifo_errors++;
1390 rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
1391 break; /* Keep the skb - we try again */
1393 /* Transmitter restarted in 'abnormal' handler. */
1395 if (rp->quirks & rqRhineI)
1396 rp->stats.collisions += (txstatus >> 3) & 0x0F;
1398 rp->stats.collisions += txstatus & 0x0F;
1400 printk(KERN_DEBUG "collisions: %1.1x:%1.1x\n",
1401 (txstatus >> 3) & 0xF,
1403 rp->stats.tx_bytes += rp->tx_skbuff[entry]->len;
1404 rp->stats.tx_packets++;
1406 /* Free the original skb. */
1407 if (rp->tx_skbuff_dma[entry]) {
1408 pci_unmap_single(rp->pdev,
1409 rp->tx_skbuff_dma[entry],
1410 rp->tx_skbuff[entry]->len,
1413 dev_kfree_skb_irq(rp->tx_skbuff[entry]);
1414 rp->tx_skbuff[entry] = NULL;
1415 entry = (++rp->dirty_tx) % TX_RING_SIZE;
1417 if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4)
1418 netif_wake_queue(dev);
1420 spin_unlock(&rp->lock);
1423 /* Process up to limit frames from receive ring */
1424 static int rhine_rx(struct net_device *dev, int limit)
1426 struct rhine_private *rp = netdev_priv(dev);
1428 int entry = rp->cur_rx % RX_RING_SIZE;
1431 printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n",
1433 le32_to_cpu(rp->rx_head_desc->rx_status));
1436 /* If EOP is set on the next entry, it's a new packet. Send it up. */
1437 for (count = 0; count < limit; ++count) {
1438 struct rx_desc *desc = rp->rx_head_desc;
1439 u32 desc_status = le32_to_cpu(desc->rx_status);
1440 int data_size = desc_status >> 16;
1442 if (desc_status & DescOwn)
1446 printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n",
1449 if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
1450 if ((desc_status & RxWholePkt) != RxWholePkt) {
1451 printk(KERN_WARNING "%s: Oversized Ethernet "
1452 "frame spanned multiple buffers, entry "
1453 "%#x length %d status %8.8x!\n",
1454 dev->name, entry, data_size,
1456 printk(KERN_WARNING "%s: Oversized Ethernet "
1457 "frame %p vs %p.\n", dev->name,
1458 rp->rx_head_desc, &rp->rx_ring[entry]);
1459 rp->stats.rx_length_errors++;
1460 } else if (desc_status & RxErr) {
1461 /* There was a error. */
1463 printk(KERN_DEBUG "rhine_rx() Rx "
1464 "error was %8.8x.\n",
1466 rp->stats.rx_errors++;
1467 if (desc_status & 0x0030) rp->stats.rx_length_errors++;
1468 if (desc_status & 0x0048) rp->stats.rx_fifo_errors++;
1469 if (desc_status & 0x0004) rp->stats.rx_frame_errors++;
1470 if (desc_status & 0x0002) {
1471 /* this can also be updated outside the interrupt handler */
1472 spin_lock(&rp->lock);
1473 rp->stats.rx_crc_errors++;
1474 spin_unlock(&rp->lock);
1478 struct sk_buff *skb;
1479 /* Length should omit the CRC */
1480 int pkt_len = data_size - 4;
1482 /* Check if the packet is long enough to accept without
1483 copying to a minimally-sized skbuff. */
1484 if (pkt_len < rx_copybreak &&
1485 (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
1486 skb_reserve(skb, 2); /* 16 byte align the IP header */
1487 pci_dma_sync_single_for_cpu(rp->pdev,
1488 rp->rx_skbuff_dma[entry],
1490 PCI_DMA_FROMDEVICE);
1492 skb_copy_to_linear_data(skb,
1493 rp->rx_skbuff[entry]->data,
1495 skb_put(skb, pkt_len);
1496 pci_dma_sync_single_for_device(rp->pdev,
1497 rp->rx_skbuff_dma[entry],
1499 PCI_DMA_FROMDEVICE);
1501 skb = rp->rx_skbuff[entry];
1503 printk(KERN_ERR "%s: Inconsistent Rx "
1504 "descriptor chain.\n",
1508 rp->rx_skbuff[entry] = NULL;
1509 skb_put(skb, pkt_len);
1510 pci_unmap_single(rp->pdev,
1511 rp->rx_skbuff_dma[entry],
1513 PCI_DMA_FROMDEVICE);
1515 skb->protocol = eth_type_trans(skb, dev);
1516 #ifdef CONFIG_VIA_RHINE_NAPI
1517 netif_receive_skb(skb);
1521 dev->last_rx = jiffies;
1522 rp->stats.rx_bytes += pkt_len;
1523 rp->stats.rx_packets++;
1525 entry = (++rp->cur_rx) % RX_RING_SIZE;
1526 rp->rx_head_desc = &rp->rx_ring[entry];
1529 /* Refill the Rx ring buffers. */
1530 for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) {
1531 struct sk_buff *skb;
1532 entry = rp->dirty_rx % RX_RING_SIZE;
1533 if (rp->rx_skbuff[entry] == NULL) {
1534 skb = dev_alloc_skb(rp->rx_buf_sz);
1535 rp->rx_skbuff[entry] = skb;
1537 break; /* Better luck next round. */
1538 skb->dev = dev; /* Mark as being used by this device. */
1539 rp->rx_skbuff_dma[entry] =
1540 pci_map_single(rp->pdev, skb->data,
1542 PCI_DMA_FROMDEVICE);
1543 rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]);
1545 rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn);
1552 * Clears the "tally counters" for CRC errors and missed frames(?).
1553 * It has been reported that some chips need a write of 0 to clear
1554 * these, for others the counters are set to 1 when written to and
1555 * instead cleared when read. So we clear them both ways ...
1557 static inline void clear_tally_counters(void __iomem *ioaddr)
1559 iowrite32(0, ioaddr + RxMissed);
1560 ioread16(ioaddr + RxCRCErrs);
1561 ioread16(ioaddr + RxMissed);
1564 static void rhine_restart_tx(struct net_device *dev) {
1565 struct rhine_private *rp = netdev_priv(dev);
1566 void __iomem *ioaddr = rp->base;
1567 int entry = rp->dirty_tx % TX_RING_SIZE;
1571 * If new errors occured, we need to sort them out before doing Tx.
1572 * In that case the ISR will be back here RSN anyway.
1574 intr_status = get_intr_status(dev);
1576 if ((intr_status & IntrTxErrSummary) == 0) {
1578 /* We know better than the chip where it should continue. */
1579 iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc),
1580 ioaddr + TxRingPtr);
1582 iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn,
1584 iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
1589 /* This should never happen */
1591 printk(KERN_WARNING "%s: rhine_restart_tx() "
1592 "Another error occured %8.8x.\n",
1593 dev->name, intr_status);
1598 static void rhine_error(struct net_device *dev, int intr_status)
1600 struct rhine_private *rp = netdev_priv(dev);
1601 void __iomem *ioaddr = rp->base;
1603 spin_lock(&rp->lock);
1605 if (intr_status & IntrLinkChange)
1606 rhine_check_media(dev, 0);
1607 if (intr_status & IntrStatsMax) {
1608 rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
1609 rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
1610 clear_tally_counters(ioaddr);
1612 if (intr_status & IntrTxAborted) {
1614 printk(KERN_INFO "%s: Abort %8.8x, frame dropped.\n",
1615 dev->name, intr_status);
1617 if (intr_status & IntrTxUnderrun) {
1618 if (rp->tx_thresh < 0xE0)
1619 iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
1621 printk(KERN_INFO "%s: Transmitter underrun, Tx "
1622 "threshold now %2.2x.\n",
1623 dev->name, rp->tx_thresh);
1625 if (intr_status & IntrTxDescRace) {
1627 printk(KERN_INFO "%s: Tx descriptor write-back race.\n",
1630 if ((intr_status & IntrTxError) &&
1631 (intr_status & (IntrTxAborted |
1632 IntrTxUnderrun | IntrTxDescRace)) == 0) {
1633 if (rp->tx_thresh < 0xE0) {
1634 iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
1637 printk(KERN_INFO "%s: Unspecified error. Tx "
1638 "threshold now %2.2x.\n",
1639 dev->name, rp->tx_thresh);
1641 if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace |
1643 rhine_restart_tx(dev);
1645 if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun |
1646 IntrTxError | IntrTxAborted | IntrNormalSummary |
1649 printk(KERN_ERR "%s: Something Wicked happened! "
1650 "%8.8x.\n", dev->name, intr_status);
1653 spin_unlock(&rp->lock);
1656 static struct net_device_stats *rhine_get_stats(struct net_device *dev)
1658 struct rhine_private *rp = netdev_priv(dev);
1659 void __iomem *ioaddr = rp->base;
1660 unsigned long flags;
1662 spin_lock_irqsave(&rp->lock, flags);
1663 rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
1664 rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
1665 clear_tally_counters(ioaddr);
1666 spin_unlock_irqrestore(&rp->lock, flags);
1671 static void rhine_set_rx_mode(struct net_device *dev)
1673 struct rhine_private *rp = netdev_priv(dev);
1674 void __iomem *ioaddr = rp->base;
1675 u32 mc_filter[2]; /* Multicast hash filter */
1676 u8 rx_mode; /* Note: 0x02=accept runt, 0x01=accept errs */
1678 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
1680 iowrite32(0xffffffff, ioaddr + MulticastFilter0);
1681 iowrite32(0xffffffff, ioaddr + MulticastFilter1);
1682 } else if ((dev->mc_count > multicast_filter_limit)
1683 || (dev->flags & IFF_ALLMULTI)) {
1684 /* Too many to match, or accept all multicasts. */
1685 iowrite32(0xffffffff, ioaddr + MulticastFilter0);
1686 iowrite32(0xffffffff, ioaddr + MulticastFilter1);
1689 struct dev_mc_list *mclist;
1691 memset(mc_filter, 0, sizeof(mc_filter));
1692 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
1693 i++, mclist = mclist->next) {
1694 int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
1696 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
1698 iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
1699 iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
1702 iowrite8(rp->rx_thresh | rx_mode, ioaddr + RxConfig);
1705 static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1707 struct rhine_private *rp = netdev_priv(dev);
1709 strcpy(info->driver, DRV_NAME);
1710 strcpy(info->version, DRV_VERSION);
1711 strcpy(info->bus_info, pci_name(rp->pdev));
1714 static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1716 struct rhine_private *rp = netdev_priv(dev);
1719 spin_lock_irq(&rp->lock);
1720 rc = mii_ethtool_gset(&rp->mii_if, cmd);
1721 spin_unlock_irq(&rp->lock);
1726 static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1728 struct rhine_private *rp = netdev_priv(dev);
1731 spin_lock_irq(&rp->lock);
1732 rc = mii_ethtool_sset(&rp->mii_if, cmd);
1733 spin_unlock_irq(&rp->lock);
1734 rhine_set_carrier(&rp->mii_if);
1739 static int netdev_nway_reset(struct net_device *dev)
1741 struct rhine_private *rp = netdev_priv(dev);
1743 return mii_nway_restart(&rp->mii_if);
1746 static u32 netdev_get_link(struct net_device *dev)
1748 struct rhine_private *rp = netdev_priv(dev);
1750 return mii_link_ok(&rp->mii_if);
1753 static u32 netdev_get_msglevel(struct net_device *dev)
1758 static void netdev_set_msglevel(struct net_device *dev, u32 value)
1763 static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
1765 struct rhine_private *rp = netdev_priv(dev);
1767 if (!(rp->quirks & rqWOL))
1770 spin_lock_irq(&rp->lock);
1771 wol->supported = WAKE_PHY | WAKE_MAGIC |
1772 WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
1773 wol->wolopts = rp->wolopts;
1774 spin_unlock_irq(&rp->lock);
1777 static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
1779 struct rhine_private *rp = netdev_priv(dev);
1780 u32 support = WAKE_PHY | WAKE_MAGIC |
1781 WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
1783 if (!(rp->quirks & rqWOL))
1786 if (wol->wolopts & ~support)
1789 spin_lock_irq(&rp->lock);
1790 rp->wolopts = wol->wolopts;
1791 spin_unlock_irq(&rp->lock);
1796 static const struct ethtool_ops netdev_ethtool_ops = {
1797 .get_drvinfo = netdev_get_drvinfo,
1798 .get_settings = netdev_get_settings,
1799 .set_settings = netdev_set_settings,
1800 .nway_reset = netdev_nway_reset,
1801 .get_link = netdev_get_link,
1802 .get_msglevel = netdev_get_msglevel,
1803 .set_msglevel = netdev_set_msglevel,
1804 .get_wol = rhine_get_wol,
1805 .set_wol = rhine_set_wol,
1806 .get_sg = ethtool_op_get_sg,
1807 .get_tx_csum = ethtool_op_get_tx_csum,
1808 .get_perm_addr = ethtool_op_get_perm_addr,
1811 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1813 struct rhine_private *rp = netdev_priv(dev);
1816 if (!netif_running(dev))
1819 spin_lock_irq(&rp->lock);
1820 rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL);
1821 spin_unlock_irq(&rp->lock);
1822 rhine_set_carrier(&rp->mii_if);
1827 static int rhine_close(struct net_device *dev)
1829 struct rhine_private *rp = netdev_priv(dev);
1830 void __iomem *ioaddr = rp->base;
1832 spin_lock_irq(&rp->lock);
1834 netif_stop_queue(dev);
1835 netif_poll_disable(dev);
1838 printk(KERN_DEBUG "%s: Shutting down ethercard, "
1839 "status was %4.4x.\n",
1840 dev->name, ioread16(ioaddr + ChipCmd));
1842 /* Switch to loopback mode to avoid hardware races. */
1843 iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
1845 /* Disable interrupts by clearing the interrupt mask. */
1846 iowrite16(0x0000, ioaddr + IntrEnable);
1848 /* Stop the chip's Tx and Rx processes. */
1849 iowrite16(CmdStop, ioaddr + ChipCmd);
1851 spin_unlock_irq(&rp->lock);
1853 free_irq(rp->pdev->irq, dev);
1862 static void __devexit rhine_remove_one(struct pci_dev *pdev)
1864 struct net_device *dev = pci_get_drvdata(pdev);
1865 struct rhine_private *rp = netdev_priv(dev);
1867 unregister_netdev(dev);
1869 pci_iounmap(pdev, rp->base);
1870 pci_release_regions(pdev);
1873 pci_disable_device(pdev);
1874 pci_set_drvdata(pdev, NULL);
1877 static void rhine_shutdown (struct pci_dev *pdev)
1879 struct net_device *dev = pci_get_drvdata(pdev);
1880 struct rhine_private *rp = netdev_priv(dev);
1881 void __iomem *ioaddr = rp->base;
1883 if (!(rp->quirks & rqWOL))
1884 return; /* Nothing to do for non-WOL adapters */
1886 rhine_power_init(dev);
1888 /* Make sure we use pattern 0, 1 and not 4, 5 */
1889 if (rp->quirks & rq6patterns)
1890 iowrite8(0x04, ioaddr + 0xA7);
1892 if (rp->wolopts & WAKE_MAGIC) {
1893 iowrite8(WOLmagic, ioaddr + WOLcrSet);
1895 * Turn EEPROM-controlled wake-up back on -- some hardware may
1896 * not cooperate otherwise.
1898 iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA);
1901 if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST))
1902 iowrite8(WOLbmcast, ioaddr + WOLcgSet);
1904 if (rp->wolopts & WAKE_PHY)
1905 iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet);
1907 if (rp->wolopts & WAKE_UCAST)
1908 iowrite8(WOLucast, ioaddr + WOLcrSet);
1911 /* Enable legacy WOL (for old motherboards) */
1912 iowrite8(0x01, ioaddr + PwcfgSet);
1913 iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
1916 /* Hit power state D3 (sleep) */
1918 iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
1920 /* TODO: Check use of pci_enable_wake() */
1925 static int rhine_suspend(struct pci_dev *pdev, pm_message_t state)
1927 struct net_device *dev = pci_get_drvdata(pdev);
1928 struct rhine_private *rp = netdev_priv(dev);
1929 unsigned long flags;
1931 if (!netif_running(dev))
1934 netif_device_detach(dev);
1935 pci_save_state(pdev);
1937 spin_lock_irqsave(&rp->lock, flags);
1938 rhine_shutdown(pdev);
1939 spin_unlock_irqrestore(&rp->lock, flags);
1941 free_irq(dev->irq, dev);
1945 static int rhine_resume(struct pci_dev *pdev)
1947 struct net_device *dev = pci_get_drvdata(pdev);
1948 struct rhine_private *rp = netdev_priv(dev);
1949 unsigned long flags;
1952 if (!netif_running(dev))
1955 if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
1956 printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
1958 ret = pci_set_power_state(pdev, PCI_D0);
1960 printk(KERN_INFO "%s: Entering power state D0 %s (%d).\n",
1961 dev->name, ret ? "failed" : "succeeded", ret);
1963 pci_restore_state(pdev);
1965 spin_lock_irqsave(&rp->lock, flags);
1967 enable_mmio(rp->pioaddr, rp->quirks);
1969 rhine_power_init(dev);
1974 init_registers(dev);
1975 spin_unlock_irqrestore(&rp->lock, flags);
1977 netif_device_attach(dev);
1981 #endif /* CONFIG_PM */
1983 static struct pci_driver rhine_driver = {
1985 .id_table = rhine_pci_tbl,
1986 .probe = rhine_init_one,
1987 .remove = __devexit_p(rhine_remove_one),
1989 .suspend = rhine_suspend,
1990 .resume = rhine_resume,
1991 #endif /* CONFIG_PM */
1992 .shutdown = rhine_shutdown,
1995 static struct dmi_system_id __initdata rhine_dmi_table[] = {
1999 DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."),
2000 DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
2006 DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
2007 DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
2013 static int __init rhine_init(void)
2015 /* when a module, this is printed whether or not devices are found in probe */
2019 if (dmi_check_system(rhine_dmi_table)) {
2020 /* these BIOSes fail at PXE boot if chip is in D3 */
2022 printk(KERN_WARNING "%s: Broken BIOS detected, avoid_D3 "
2027 printk(KERN_INFO "%s: avoid_D3 set.\n", DRV_NAME);
2029 return pci_register_driver(&rhine_driver);
2033 static void __exit rhine_cleanup(void)
2035 pci_unregister_driver(&rhine_driver);
2039 module_init(rhine_init);
2040 module_exit(rhine_cleanup);