git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/boot/dts/cm5200.dts

   1 /*
   2  * CM5200 board Device Tree Source
   3  *
   4  * Copyright (C) 2007 Semihalf
   5  * Marian Balakowicz <m8@semihalf.com>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /dts-v1/;
  14
  15 / {
  16         model = "schindler,cm5200";
  17         compatible = "schindler,cm5200";
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20
  21         cpus {
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24
  25                 PowerPC,5200@0 {
  26                         device_type = "cpu";
  27                         reg = <0>;
  28                         d-cache-line-size = <32>;
  29                         i-cache-line-size = <32>;
  30                         d-cache-size = <0x4000>;                // L1, 16K
  31                         i-cache-size = <0x4000>;                // L1, 16K
  32                         timebase-frequency = <0>;       // from bootloader
  33                         bus-frequency = <0>;            // from bootloader
  34                         clock-frequency = <0>;          // from bootloader
  35                 };
  36         };
  37
  38         memory {
  39                 device_type = "memory";
  40                 reg = <0x00000000 0x04000000>;  // 64MB
  41         };
  42
  43         soc5200@f0000000 {
  44                 #address-cells = <1>;
  45                 #size-cells = <1>;
  46                 compatible = "fsl,mpc5200b-immr";
  47                 ranges = <0 0xf0000000 0x0000c000>;
  48                 reg = <0xf0000000 0x00000100>;
  49                 bus-frequency = <0>;            // from bootloader
  50                 system-frequency = <0>;         // from bootloader
  51
  52                 cdm@200 {
  53                         compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
  54                         reg = <0x200 0x38>;
  55                 };
  56
  57                 mpc5200_pic: interrupt-controller@500 {
  58                         // 5200 interrupts are encoded into two levels;
  59                         interrupt-controller;
  60                         #interrupt-cells = <3>;
  61                         compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
  62                         reg = <0x500 0x80>;
  63                 };
  64
  65                 timer@600 {     // General Purpose Timer
  66                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  67                         reg = <0x600 0x10>;
  68                         interrupts = <1 9 0>;
  69                         interrupt-parent = <&mpc5200_pic>;
  70                         fsl,has-wdt;
  71                 };
  72
  73                 timer@610 {     // General Purpose Timer
  74                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  75                         reg = <0x610 0x10>;
  76                         interrupts = <1 10 0>;
  77                         interrupt-parent = <&mpc5200_pic>;
  78                 };
  79
  80                 timer@620 {     // General Purpose Timer
  81                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  82                         reg = <0x620 0x10>;
  83                         interrupts = <1 11 0>;
  84                         interrupt-parent = <&mpc5200_pic>;
  85                 };
  86
  87                 timer@630 {     // General Purpose Timer
  88                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  89                         reg = <0x630 0x10>;
  90                         interrupts = <1 12 0>;
  91                         interrupt-parent = <&mpc5200_pic>;
  92                 };
  93
  94                 timer@640 {     // General Purpose Timer
  95                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  96                         reg = <0x640 0x10>;
  97                         interrupts = <1 13 0>;
  98                         interrupt-parent = <&mpc5200_pic>;
  99                 };
 100
 101                 timer@650 {     // General Purpose Timer
 102                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 103                         reg = <0x650 0x10>;
 104                         interrupts = <1 14 0>;
 105                         interrupt-parent = <&mpc5200_pic>;
 106                 };
 107
 108                 timer@660 {     // General Purpose Timer
 109                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 110                         reg = <0x660 0x10>;
 111                         interrupts = <1 15 0>;
 112                         interrupt-parent = <&mpc5200_pic>;
 113                 };
 114
 115                 timer@670 {     // General Purpose Timer
 116                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 117                         reg = <0x670 0x10>;
 118                         interrupts = <1 16 0>;
 119                         interrupt-parent = <&mpc5200_pic>;
 120                 };
 121
 122                 rtc@800 {       // Real time clock
 123                         compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
 124                         reg = <0x800 0x100>;
 125                         interrupts = <1 5 0 1 6 0>;
 126                         interrupt-parent = <&mpc5200_pic>;
 127                 };
 128
 129                 gpio@b00 {
 130                         compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
 131                         reg = <0xb00 0x40>;
 132                         interrupts = <1 7 0>;
 133                         interrupt-parent = <&mpc5200_pic>;
 134                 };
 135
 136                 gpio@c00 {
 137                         compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
 138                         reg = <0xc00 0x40>;
 139                         interrupts = <1 8 0 0 3 0>;
 140                         interrupt-parent = <&mpc5200_pic>;
 141                 };
 142
 143                 spi@f00 {
 144                         compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 145                         reg = <0xf00 0x20>;
 146                         interrupts = <2 13 0 2 14 0>;
 147                         interrupt-parent = <&mpc5200_pic>;
 148                 };
 149
 150                 usb@1000 {
 151                         compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
 152                         reg = <0x1000 0xff>;
 153                         interrupts = <2 6 0>;
 154                         interrupt-parent = <&mpc5200_pic>;
 155                 };
 156
 157                 dma-controller@1200 {
 158                         compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
 159                         reg = <0x1200 0x80>;
 160                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 161                                       3 4 0  3 5 0  3 6 0  3 7 0
 162                                       3 8 0  3 9 0  3 10 0  3 11 0
 163                                       3 12 0  3 13 0  3 14 0  3 15 0>;
 164                         interrupt-parent = <&mpc5200_pic>;
 165                 };
 166
 167                 xlb@1f00 {
 168                         compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
 169                         reg = <0x1f00 0x100>;
 170                 };
 171
 172                 serial@2000 {           // PSC1
 173                         device_type = "serial";
 174                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 175                         port-number = <0>;  // Logical port assignment
 176                         reg = <0x2000 0x100>;
 177                         interrupts = <2 1 0>;
 178                         interrupt-parent = <&mpc5200_pic>;
 179                 };
 180
 181                 serial@2200 {           // PSC2
 182                         device_type = "serial";
 183                         compatible = "fsl,mpc5200-psc-uart";
 184                         port-number = <1>;  // Logical port assignment
 185                         reg = <0x2200 0x100>;
 186                         interrupts = <2 2 0>;
 187                         interrupt-parent = <&mpc5200_pic>;
 188                 };
 189
 190                 serial@2400 {           // PSC3
 191                         device_type = "serial";
 192                         compatible = "fsl,mpc5200-psc-uart";
 193                         port-number = <2>;  // Logical port assignment
 194                         reg = <0x2400 0x100>;
 195                         interrupts = <2 3 0>;
 196                         interrupt-parent = <&mpc5200_pic>;
 197                 };
 198
 199                 serial@2c00 {           // PSC6
 200                         device_type = "serial";
 201                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 202                         port-number = <5>;  // Logical port assignment
 203                         reg = <0x2c00 0x100>;
 204                         interrupts = <2 4 0>;
 205                         interrupt-parent = <&mpc5200_pic>;
 206                 };
 207
 208                 ethernet@3000 {
 209                         device_type = "network";
 210                         compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
 211                         reg = <0x3000 0x400>;
 212                         local-mac-address = [ 00 00 00 00 00 00 ];
 213                         interrupts = <2 5 0>;
 214                         interrupt-parent = <&mpc5200_pic>;
 215                         phy-handle = <&phy0>;
 216                 };
 217
 218                 mdio@3000 {
 219                         #address-cells = <1>;
 220                         #size-cells = <0>;
 221                         compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
 222                         reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
 223                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 224                         interrupt-parent = <&mpc5200_pic>;
 225
 226                         phy0: ethernet-phy@0 {
 227                                 device_type = "ethernet-phy";
 228                                 reg = <0>;
 229                         };
 230                 };
 231
 232                 i2c@3d40 {
 233                         #address-cells = <1>;
 234                         #size-cells = <0>;
 235                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 236                         reg = <0x3d40 0x40>;
 237                         interrupts = <2 16 0>;
 238                         interrupt-parent = <&mpc5200_pic>;
 239                         fsl5200-clocking;
 240                 };
 241
 242                 sram@8000 {
 243                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
 244                         reg = <0x8000 0x4000>;
 245                 };
 246         };
 247
 248         lpb {
 249                 model = "fsl,lpb";
 250                 compatible = "fsl,lpb";
 251                 #address-cells = <2>;
 252                 #size-cells = <1>;
 253                 ranges = <0 0 0xfc000000 0x2000000>;
 254
 255                 // 16-bit flash device at LocalPlus Bus CS0
 256                 flash@0,0 {
 257                         compatible = "cfi-flash";
 258                         reg = <0 0 0x2000000>;
 259                         bank-width = <2>;
 260                         device-width = <2>;
 261                         #size-cells = <1>;
 262                         #address-cells = <1>;
 263                 };
 264         };
 265 };