1 /* zoltrix radio plus driver for Linux radio support
2 * (c) 1998 C. van Schaik <carl@leg.uct.ac.za>
5 * Due to the inconsistency in reading from the signal flags
6 * it is difficult to get an accurate tuned signal.
8 * It seems that the card is not linear to 0 volume. It cuts off
9 * at a low volume, and it is not possible (at least I have not found)
10 * to get fine volume control over the low volume range.
12 * Some code derived from code by Romolo Manfredini
15 * 1999-05-06 - (C. van Schaik)
16 * - Make signal strength and stereo scans
17 * kinder to cpu while in delay
18 * 1999-01-05 - (C. van Schaik)
19 * - Changed tuning to 1/160Mhz accuracy
20 * - Added stereo support
21 * (card defaults to stereo)
22 * (can explicitly force mono on the card)
23 * (can detect if station is in stereo)
24 * - Added unmute function
25 * - Reworked ioctl functions
26 * 2002-07-15 - Fix Stereo typo
28 * 2006-07-24 - Converted to V4L2 API
29 * by Mauro Carvalho Chehab <mchehab@infradead.org>
32 #include <linux/module.h> /* Modules */
33 #include <linux/init.h> /* Initdata */
34 #include <linux/ioport.h> /* request_region */
35 #include <linux/delay.h> /* udelay, msleep */
36 #include <asm/io.h> /* outb, outb_p */
37 #include <asm/uaccess.h> /* copy to/from user */
38 #include <linux/videodev2.h> /* kernel radio structs */
39 #include <media/v4l2-common.h>
41 #include <linux/version.h> /* for KERNEL_VERSION MACRO */
42 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
44 static struct v4l2_queryctrl radio_qctrl[] = {
46 .id = V4L2_CID_AUDIO_MUTE,
51 .type = V4L2_CTRL_TYPE_BOOLEAN,
53 .id = V4L2_CID_AUDIO_VOLUME,
58 .default_value = 0xff,
59 .type = V4L2_CTRL_TYPE_INTEGER,
63 #ifndef CONFIG_RADIO_ZOLTRIX_PORT
64 #define CONFIG_RADIO_ZOLTRIX_PORT -1
67 static int io = CONFIG_RADIO_ZOLTRIX_PORT;
68 static int radio_nr = -1;
73 unsigned long curfreq;
79 static int zol_setvol(struct zol_device *dev, int vol)
85 mutex_lock(&dev->lock);
89 inb(io + 3); /* Zoltrix needs to be read to confirm */
90 mutex_unlock(&dev->lock);
94 outb(dev->curvol-1, io);
97 mutex_unlock(&dev->lock);
101 static void zol_mute(struct zol_device *dev)
104 mutex_lock(&dev->lock);
107 inb(io + 3); /* Zoltrix needs to be read to confirm */
108 mutex_unlock(&dev->lock);
111 static void zol_unmute(struct zol_device *dev)
114 zol_setvol(dev, dev->curvol);
117 static int zol_setfreq(struct zol_device *dev, unsigned long freq)
119 /* tunes the radio to the desired frequency */
120 unsigned long long bitmask, f, m;
121 unsigned int stereo = dev->stereo;
126 m = (freq / 160 - 8800) * 2;
127 f = (unsigned long long) m + 0x4d1c;
129 bitmask = 0xc480402c10080000ull;
132 mutex_lock(&dev->lock);
136 inb(io + 3); /* Zoltrix needs to be read to confirm */
141 bitmask = (bitmask ^ ((f & 0xff) << 47) ^ ((f & 0xff00) << 30) ^ ( stereo << 31));
143 if ((bitmask & 0x8000000000000000ull) != 0) {
160 /* termination sequence */
177 mutex_unlock(&dev->lock);
181 zol_setvol(dev, dev->curvol);
186 /* Get signal strength */
188 static int zol_getsigstr(struct zol_device *dev)
192 mutex_lock(&dev->lock);
193 outb(0x00, io); /* This stuff I found to do nothing */
194 outb(dev->curvol, io);
201 mutex_unlock(&dev->lock);
206 if ((a == 0xcf) || (a == 0xdf) /* I found this out by playing */
207 || (a == 0xef)) /* with a binary scanner on the card io */
212 static int zol_is_stereo (struct zol_device *dev)
216 mutex_lock(&dev->lock);
219 outb(dev->curvol, io);
226 mutex_unlock(&dev->lock);
228 if ((x1 == x2) && (x1 == 0xcf))
233 static int zol_do_ioctl(struct inode *inode, struct file *file,
234 unsigned int cmd, void *arg)
236 struct video_device *dev = video_devdata(file);
237 struct zol_device *zol = dev->priv;
240 case VIDIOC_QUERYCAP:
242 struct v4l2_capability *v = arg;
243 memset(v,0,sizeof(*v));
244 strlcpy(v->driver, "radio-zoltrix", sizeof (v->driver));
245 strlcpy(v->card, "Zoltrix Radio", sizeof (v->card));
246 sprintf(v->bus_info,"ISA");
247 v->version = RADIO_VERSION;
248 v->capabilities = V4L2_CAP_TUNER;
254 struct v4l2_tuner *v = arg;
259 memset(v,0,sizeof(*v));
260 strcpy(v->name, "FM");
261 v->type = V4L2_TUNER_RADIO;
263 v->rangelow=(88*16000);
264 v->rangehigh=(108*16000);
265 v->rxsubchans =V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO;
266 v->capability=V4L2_TUNER_CAP_LOW;
267 if(zol_is_stereo(zol))
268 v->audmode = V4L2_TUNER_MODE_STEREO;
270 v->audmode = V4L2_TUNER_MODE_MONO;
271 v->signal=0xFFFF*zol_getsigstr(zol);
277 struct v4l2_tuner *v = arg;
284 case VIDIOC_S_FREQUENCY:
286 struct v4l2_frequency *f = arg;
288 zol->curfreq = f->frequency;
289 zol_setfreq(zol, zol->curfreq);
292 case VIDIOC_G_FREQUENCY:
294 struct v4l2_frequency *f = arg;
296 f->type = V4L2_TUNER_RADIO;
297 f->frequency = zol->curfreq;
301 case VIDIOC_QUERYCTRL:
303 struct v4l2_queryctrl *qc = arg;
306 for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
307 if (qc->id && qc->id == radio_qctrl[i].id) {
308 memcpy(qc, &(radio_qctrl[i]),
317 struct v4l2_control *ctrl= arg;
320 case V4L2_CID_AUDIO_MUTE:
321 ctrl->value=zol->muted;
323 case V4L2_CID_AUDIO_VOLUME:
324 ctrl->value=zol->curvol * 4096;
331 struct v4l2_control *ctrl= arg;
334 case V4L2_CID_AUDIO_MUTE:
339 zol_setvol(zol,zol->curvol);
342 case V4L2_CID_AUDIO_VOLUME:
343 zol_setvol(zol,ctrl->value/4096);
347 zol_setfreq(zol, zol->curfreq);
349 /* FIXME: Implement stereo/mono switch on V4L2 */
350 if (v->mode & VIDEO_SOUND_STEREO) {
352 zol_setfreq(zol, zol->curfreq);
354 if (v->mode & VIDEO_SOUND_MONO) {
356 zol_setfreq(zol, zol->curfreq);
363 return v4l_compat_translate_ioctl(inode,file,cmd,arg,
368 static int zol_ioctl(struct inode *inode, struct file *file,
369 unsigned int cmd, unsigned long arg)
371 return video_usercopy(inode, file, cmd, arg, zol_do_ioctl);
374 static struct zol_device zoltrix_unit;
376 static struct file_operations zoltrix_fops =
378 .owner = THIS_MODULE,
379 .open = video_exclusive_open,
380 .release = video_exclusive_release,
382 .compat_ioctl = v4l_compat_ioctl32,
386 static struct video_device zoltrix_radio =
388 .owner = THIS_MODULE,
389 .name = "Zoltrix Radio Plus",
390 .type = VID_TYPE_TUNER,
392 .fops = &zoltrix_fops,
395 static int __init zoltrix_init(void)
398 printk(KERN_ERR "You must set an I/O address with io=0x???\n");
401 if ((io != 0x20c) && (io != 0x30c)) {
402 printk(KERN_ERR "zoltrix: invalid port, try 0x20c or 0x30c\n");
406 zoltrix_radio.priv = &zoltrix_unit;
407 if (!request_region(io, 2, "zoltrix")) {
408 printk(KERN_ERR "zoltrix: port 0x%x already in use\n", io);
412 if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) == -1)
414 release_region(io, 2);
417 printk(KERN_INFO "Zoltrix Radio Plus card driver.\n");
419 mutex_init(&zoltrix_unit.lock);
421 /* mute card - prevents noisy bootups */
423 /* this ensures that the volume is all the way down */
430 zoltrix_unit.curvol = 0;
431 zoltrix_unit.stereo = 1;
436 MODULE_AUTHOR("C.van Schaik");
437 MODULE_DESCRIPTION("A driver for the Zoltrix Radio Plus.");
438 MODULE_LICENSE("GPL");
440 module_param(io, int, 0);
441 MODULE_PARM_DESC(io, "I/O address of the Zoltrix Radio Plus (0x20c or 0x30c)");
442 module_param(radio_nr, int, 0);
444 static void __exit zoltrix_cleanup_module(void)
446 video_unregister_device(&zoltrix_radio);
447 release_region(io, 2);
450 module_init(zoltrix_init);
451 module_exit(zoltrix_cleanup_module);