git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/cypress_m8.c

   1 /*
   2  * USB Cypress M8 driver
   3  *
   4  *      Copyright (C) 2004
   5  *          Lonnie Mendez (dignome@gmail.com)
   6  *      Copyright (C) 2003,2004
   7  *          Neil Whelchel (koyama@firstlight.net)
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  * See Documentation/usb/usb-serial.txt for more information on using this driver
  15  *
  16  * See http://geocities.com/i0xox0i for information on this driver and the
  17  * earthmate usb device.
  18  *
  19  *  Lonnie Mendez <dignome@gmail.com>
  20  *  4-29-2005
  21  *      Fixed problem where setting or retreiving the serial config would fail with
  22  *      EPIPE.  Removed CRTS toggling so the driver behaves more like other usbserial
  23  *      adapters.  Issued new interval of 1ms instead of the default 10ms.  As a
  24  *      result, transfer speed has been substantially increased.  From avg. 850bps to
  25  *      avg. 3300bps.  initial termios has also been modified.  Cleaned up code and
  26  *      formatting issues so it is more readable.  Replaced the C++ style comments.
  27  *
  28  *  Lonnie Mendez <dignome@gmail.com>
  29  *  12-15-2004
  30  *      Incorporated write buffering from pl2303 driver.  Fixed bug with line
  31  *      handling so both lines are raised in cypress_open. (was dropping rts)
  32  *      Various code cleanups made as well along with other misc bug fixes.
  33  *
  34  *  Lonnie Mendez <dignome@gmail.com>
  35  *  04-10-2004
  36  *      Driver modified to support dynamic line settings.  Various improvments
  37  *      and features.
  38  *
  39  *  Neil Whelchel
  40  *  10-2003
  41  *      Driver first released.
  42  *
  43  */
  44
  45 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
  46 /* Thanks to cypress for providing references for the hid reports. */
  47 /* Thanks to Jiang Zhang for providing links and for general help. */
  48 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
  49
  50
  51 #include <linux/kernel.h>
  52 #include <linux/errno.h>
  53 #include <linux/init.h>
  54 #include <linux/slab.h>
  55 #include <linux/tty.h>
  56 #include <linux/tty_driver.h>
  57 #include <linux/tty_flip.h>
  58 #include <linux/module.h>
  59 #include <linux/moduleparam.h>
  60 #include <linux/spinlock.h>
  61 #include <linux/usb.h>
  62 #include <linux/usb/serial.h>
  63 #include <linux/serial.h>
  64 #include <linux/delay.h>
  65 #include <asm/uaccess.h>
  66
  67 #include "cypress_m8.h"
  68
  69
  70 #ifdef CONFIG_USB_SERIAL_DEBUG
  71         static int debug = 1;
  72 #else
  73         static int debug;
  74 #endif
  75 static int stats;
  76 static int interval;
  77
  78 /*
  79  * Version Information
  80  */
  81 #define DRIVER_VERSION "v1.09"
  82 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
  83 #define DRIVER_DESC "Cypress USB to Serial Driver"
  84
  85 /* write buffer size defines */
  86 #define CYPRESS_BUF_SIZE        1024
  87 #define CYPRESS_CLOSING_WAIT    (30*HZ)
  88
  89 static struct usb_device_id id_table_earthmate [] = {
  90         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
  91         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
  92         { }                                             /* Terminating entry */
  93 };
  94
  95 static struct usb_device_id id_table_cyphidcomrs232 [] = {
  96         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
  97         { }                                             /* Terminating entry */
  98 };
  99
 100 static struct usb_device_id id_table_nokiaca42v2 [] = {
 101         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 102         { }                                             /* Terminating entry */
 103 };
 104
 105 static struct usb_device_id id_table_combined [] = {
 106         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 107         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 108         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 109         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 110         { }                                             /* Terminating entry */
 111 };
 112
 113 MODULE_DEVICE_TABLE (usb, id_table_combined);
 114
 115 static struct usb_driver cypress_driver = {
 116         .name =         "cypress",
 117         .probe =        usb_serial_probe,
 118         .disconnect =   usb_serial_disconnect,
 119         .id_table =     id_table_combined,
 120         .no_dynamic_id =        1,
 121 };
 122
 123 struct cypress_private {
 124         spinlock_t lock;                   /* private lock */
 125         int chiptype;                      /* identifier of device, for quirks/etc */
 126         int bytes_in;                      /* used for statistics */
 127         int bytes_out;                     /* used for statistics */
 128         int cmd_count;                     /* used for statistics */
 129         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
 130         struct cypress_buf *buf;           /* write buffer */
 131         int write_urb_in_use;              /* write urb in use indicator */
 132         int write_urb_interval;            /* interval to use for write urb */
 133         int read_urb_interval;             /* interval to use for read urb */
 134         int comm_is_ok;                    /* true if communication is (still) ok */
 135         int termios_initialized;
 136         __u8 line_control;                 /* holds dtr / rts value */
 137         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
 138         __u8 current_config;               /* stores the current configuration byte */
 139         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
 140         int baud_rate;                     /* stores current baud rate in integer form */
 141         int cbr_mask;                      /* stores current baud rate in masked form */
 142         int isthrottled;                   /* if throttled, discard reads */
 143         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 144         char prev_status, diff_status;     /* used for TIOCMIWAIT */
 145         /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
 146         struct termios tmp_termios;        /* stores the old termios settings */
 147 };
 148
 149 /* write buffer structure */
 150 struct cypress_buf {
 151         unsigned int    buf_size;
 152         char            *buf_buf;
 153         char            *buf_get;
 154         char            *buf_put;
 155 };
 156
 157 /* function prototypes for the Cypress USB to serial device */
 158 static int  cypress_earthmate_startup   (struct usb_serial *serial);
 159 static int  cypress_hidcom_startup      (struct usb_serial *serial);
 160 static int  cypress_ca42v2_startup      (struct usb_serial *serial);
 161 static void cypress_shutdown            (struct usb_serial *serial);
 162 static int  cypress_open                (struct usb_serial_port *port, struct file *filp);
 163 static void cypress_close               (struct usb_serial_port *port, struct file *filp);
 164 static int  cypress_write               (struct usb_serial_port *port, const unsigned char *buf, int count);
 165 static void cypress_send                (struct usb_serial_port *port);
 166 static int  cypress_write_room          (struct usb_serial_port *port);
 167 static int  cypress_ioctl               (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 168 static void cypress_set_termios         (struct usb_serial_port *port, struct termios * old);
 169 static int  cypress_tiocmget            (struct usb_serial_port *port, struct file *file);
 170 static int  cypress_tiocmset            (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
 171 static int  cypress_chars_in_buffer     (struct usb_serial_port *port);
 172 static void cypress_throttle            (struct usb_serial_port *port);
 173 static void cypress_unthrottle          (struct usb_serial_port *port);
 174 static void cypress_set_dead            (struct usb_serial_port *port);
 175 static void cypress_read_int_callback   (struct urb *urb);
 176 static void cypress_write_int_callback  (struct urb *urb);
 177 /* baud helper functions */
 178 static int       mask_to_rate           (unsigned mask);
 179 static unsigned  rate_to_mask           (int rate);
 180 /* write buffer functions */
 181 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
 182 static void               cypress_buf_free(struct cypress_buf *cb);
 183 static void               cypress_buf_clear(struct cypress_buf *cb);
 184 static unsigned int       cypress_buf_data_avail(struct cypress_buf *cb);
 185 static unsigned int       cypress_buf_space_avail(struct cypress_buf *cb);
 186 static unsigned int       cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
 187 static unsigned int       cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
 188
 189
 190 static struct usb_serial_driver cypress_earthmate_device = {
 191         .driver = {
 192                 .owner =                THIS_MODULE,
 193                 .name =                 "earthmate",
 194         },
 195         .description =                  "DeLorme Earthmate USB",
 196         .id_table =                     id_table_earthmate,
 197         .num_interrupt_in =             1,
 198         .num_interrupt_out =            1,
 199         .num_bulk_in =                  NUM_DONT_CARE,
 200         .num_bulk_out =                 NUM_DONT_CARE,
 201         .num_ports =                    1,
 202         .attach =                       cypress_earthmate_startup,
 203         .shutdown =                     cypress_shutdown,
 204         .open =                         cypress_open,
 205         .close =                        cypress_close,
 206         .write =                        cypress_write,
 207         .write_room =                   cypress_write_room,
 208         .ioctl =                        cypress_ioctl,
 209         .set_termios =                  cypress_set_termios,
 210         .tiocmget =                     cypress_tiocmget,
 211         .tiocmset =                     cypress_tiocmset,
 212         .chars_in_buffer =              cypress_chars_in_buffer,
 213         .throttle =                     cypress_throttle,
 214         .unthrottle =                   cypress_unthrottle,
 215         .read_int_callback =            cypress_read_int_callback,
 216         .write_int_callback =           cypress_write_int_callback,
 217 };
 218
 219 static struct usb_serial_driver cypress_hidcom_device = {
 220         .driver = {
 221                 .owner =                THIS_MODULE,
 222                 .name =                 "cyphidcom",
 223         },
 224         .description =                  "HID->COM RS232 Adapter",
 225         .id_table =                     id_table_cyphidcomrs232,
 226         .num_interrupt_in =             1,
 227         .num_interrupt_out =            1,
 228         .num_bulk_in =                  NUM_DONT_CARE,
 229         .num_bulk_out =                 NUM_DONT_CARE,
 230         .num_ports =                    1,
 231         .attach =                       cypress_hidcom_startup,
 232         .shutdown =                     cypress_shutdown,
 233         .open =                         cypress_open,
 234         .close =                        cypress_close,
 235         .write =                        cypress_write,
 236         .write_room =                   cypress_write_room,
 237         .ioctl =                        cypress_ioctl,
 238         .set_termios =                  cypress_set_termios,
 239         .tiocmget =                     cypress_tiocmget,
 240         .tiocmset =                     cypress_tiocmset,
 241         .chars_in_buffer =              cypress_chars_in_buffer,
 242         .throttle =                     cypress_throttle,
 243         .unthrottle =                   cypress_unthrottle,
 244         .read_int_callback =            cypress_read_int_callback,
 245         .write_int_callback =           cypress_write_int_callback,
 246 };
 247
 248 static struct usb_serial_driver cypress_ca42v2_device = {
 249         .driver = {
 250                 .owner =                THIS_MODULE,
 251                 .name =                 "nokiaca42v2",
 252         },
 253         .description =                  "Nokia CA-42 V2 Adapter",
 254         .id_table =                     id_table_nokiaca42v2,
 255         .num_interrupt_in =             1,
 256         .num_interrupt_out =            1,
 257         .num_bulk_in =                  NUM_DONT_CARE,
 258         .num_bulk_out =                 NUM_DONT_CARE,
 259         .num_ports =                    1,
 260         .attach =                       cypress_ca42v2_startup,
 261         .shutdown =                     cypress_shutdown,
 262         .open =                         cypress_open,
 263         .close =                        cypress_close,
 264         .write =                        cypress_write,
 265         .write_room =                   cypress_write_room,
 266         .ioctl =                        cypress_ioctl,
 267         .set_termios =                  cypress_set_termios,
 268         .tiocmget =                     cypress_tiocmget,
 269         .tiocmset =                     cypress_tiocmset,
 270         .chars_in_buffer =              cypress_chars_in_buffer,
 271         .throttle =                     cypress_throttle,
 272         .unthrottle =                   cypress_unthrottle,
 273         .read_int_callback =            cypress_read_int_callback,
 274         .write_int_callback =           cypress_write_int_callback,
 275 };
 276
 277 /*****************************************************************************
 278  * Cypress serial helper functions
 279  *****************************************************************************/
 280
 281
 282 /* This function can either set or retrieve the current serial line settings */
 283 static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
 284                                    int parity_enable, int parity_type, int reset, int cypress_request_type)
 285 {
 286         int new_baudrate = 0, retval = 0, tries = 0;
 287         struct cypress_private *priv;
 288         __u8 feature_buffer[8];
 289         unsigned long flags;
 290
 291         dbg("%s", __FUNCTION__);
 292
 293         priv = usb_get_serial_port_data(port);
 294
 295         if (!priv->comm_is_ok)
 296                 return -ENODEV;
 297
 298         switch(cypress_request_type) {
 299                 case CYPRESS_SET_CONFIG:
 300
 301                         /*
 302                          * The general purpose firmware for the Cypress M8 allows for a maximum speed
 303                          * of 57600bps (I have no idea whether DeLorme chose to use the general purpose
 304                          * firmware or not), if you need to modify this speed setting for your own
 305                          * project please add your own chiptype and modify the code likewise.  The
 306                          * Cypress HID->COM device will work successfully up to 115200bps (but the
 307                          * actual throughput is around 3kBps).
 308                          */
 309                         if (baud_mask != priv->cbr_mask) {
 310                                 dbg("%s - baud rate is changing", __FUNCTION__);
 311                                 if ( priv->chiptype == CT_EARTHMATE ) {
 312                                         /* 300 and 600 baud rates are supported under the generic firmware,
 313                                          * but are not used with NMEA and SiRF protocols */
 314
 315                                         if ( (baud_mask == B300) || (baud_mask == B600) ) {
 316                                                 err("%s - failed setting baud rate, unsupported speed",
 317                                                     __FUNCTION__);
 318                                                 new_baudrate = priv->baud_rate;
 319                                         } else if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 320                                                 err("%s - failed setting baud rate, unsupported speed",
 321                                                     __FUNCTION__);
 322                                                 new_baudrate = priv->baud_rate;
 323                                         }
 324                                 } else if (priv->chiptype == CT_CYPHIDCOM) {
 325                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 326                                                 err("%s - failed setting baud rate, unsupported speed",
 327                                                     __FUNCTION__);
 328                                                 new_baudrate = priv->baud_rate;
 329                                         }
 330                                 } else if (priv->chiptype == CT_CA42V2) {
 331                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 332                                                 err("%s - failed setting baud rate, unsupported speed",
 333                                                     __FUNCTION__);
 334                                                 new_baudrate = priv->baud_rate;
 335                                         }
 336                                 } else if (priv->chiptype == CT_GENERIC) {
 337                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 338                                                 err("%s - failed setting baud rate, unsupported speed",
 339                                                     __FUNCTION__);
 340                                                 new_baudrate = priv->baud_rate;
 341                                         }
 342                                 } else {
 343                                         info("%s - please define your chiptype", __FUNCTION__);
 344                                         new_baudrate = priv->baud_rate;
 345                                 }
 346                         } else {  /* baud rate not changing, keep the old */
 347                                 new_baudrate = priv->baud_rate;
 348                         }
 349                         dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate);
 350
 351                         memset(feature_buffer, 0, 8);
 352                         /* fill the feature_buffer with new configuration */
 353                         *((u_int32_t *)feature_buffer) = new_baudrate;
 354
 355                         feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 356                         /* 1 bit gap */
 357                         feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
 358                         feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
 359                         feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
 360                         /* 1 bit gap */
 361                         feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
 362
 363                         dbg("%s - device is being sent this feature report:", __FUNCTION__);
 364                         dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1],
 365                             feature_buffer[2], feature_buffer[3], feature_buffer[4]);
 366
 367                         do {
 368                         retval = usb_control_msg (port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
 369                                                   HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 370                                                           0x0300, 0, feature_buffer, 8, 500);
 371
 372                                 if (tries++ >= 3)
 373                                         break;
 374
 375                         } while (retval != 8 && retval != -ENODEV);
 376
 377                         if (retval != 8) {
 378                                 err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
 379                                 cypress_set_dead(port);
 380                         } else {
 381                                 spin_lock_irqsave(&priv->lock, flags);
 382                                 priv->baud_rate = new_baudrate;
 383                                 priv->cbr_mask = baud_mask;
 384                                 priv->current_config = feature_buffer[4];
 385                                 spin_unlock_irqrestore(&priv->lock, flags);
 386                         }
 387                 break;
 388                 case CYPRESS_GET_CONFIG:
 389                         dbg("%s - retreiving serial line settings", __FUNCTION__);
 390                         /* set initial values in feature buffer */
 391                         memset(feature_buffer, 0, 8);
 392
 393                         do {
 394                         retval = usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
 395                                                   HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 396                                                           0x0300, 0, feature_buffer, 8, 500);
 397
 398                                 if (tries++ >= 3)
 399                                         break;
 400
 401                         } while (retval != 5 && retval != -ENODEV);
 402
 403                         if (retval != 5) {
 404                                 err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
 405                                 cypress_set_dead(port);
 406                                 return retval;
 407                         } else {
 408                                 spin_lock_irqsave(&priv->lock, flags);
 409
 410                                 /* store the config in one byte, and later use bit masks to check values */
 411                                 priv->current_config = feature_buffer[4];
 412                                 priv->baud_rate = *((u_int32_t *)feature_buffer);
 413
 414                                 if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
 415                                         dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
 416                                 spin_unlock_irqrestore(&priv->lock, flags);
 417                         }
 418         }
 419         spin_lock_irqsave(&priv->lock, flags);
 420         ++priv->cmd_count;
 421         spin_unlock_irqrestore(&priv->lock, flags);
 422
 423         return retval;
 424 } /* cypress_serial_control */
 425
 426
 427 static void cypress_set_dead(struct usb_serial_port *port)
 428 {
 429         struct cypress_private *priv = usb_get_serial_port_data(port);
 430         unsigned long flags;
 431
 432         spin_lock_irqsave(&priv->lock, flags);
 433         if (!priv->comm_is_ok) {
 434                 spin_unlock_irqrestore(&priv->lock, flags);
 435                 return;
 436         }
 437         priv->comm_is_ok = 0;
 438         spin_unlock_irqrestore(&priv->lock, flags);
 439
 440         err("cypress_m8 suspending failing port %d - interval might be too short",
 441             port->number);
 442 }
 443
 444
 445 /* given a baud mask, it will return integer baud on success */
 446 static int mask_to_rate (unsigned mask)
 447 {
 448         int rate;
 449
 450         switch (mask) {
 451                 case B0: rate = 0; break;
 452                 case B300: rate = 300; break;
 453                 case B600: rate = 600; break;
 454                 case B1200: rate = 1200; break;
 455                 case B2400: rate = 2400; break;
 456                 case B4800: rate = 4800; break;
 457                 case B9600: rate = 9600; break;
 458                 case B19200: rate = 19200; break;
 459                 case B38400: rate = 38400; break;
 460                 case B57600: rate = 57600; break;
 461                 case B115200: rate = 115200; break;
 462                 default: rate = -1;
 463         }
 464
 465         return rate;
 466 }
 467
 468
 469 static unsigned rate_to_mask (int rate)
 470 {
 471         unsigned mask;
 472
 473         switch (rate) {
 474                 case 0: mask = B0; break;
 475                 case 300: mask = B300; break;
 476                 case 600: mask = B600; break;
 477                 case 1200: mask = B1200; break;
 478                 case 2400: mask = B2400; break;
 479                 case 4800: mask = B4800; break;
 480                 case 9600: mask = B9600; break;
 481                 case 19200: mask = B19200; break;
 482                 case 38400: mask = B38400; break;
 483                 case 57600: mask = B57600; break;
 484                 case 115200: mask = B115200; break;
 485                 default: mask = 0x40;
 486         }
 487
 488         return mask;
 489 }
 490 /*****************************************************************************
 491  * Cypress serial driver functions
 492  *****************************************************************************/
 493
 494
 495 static int generic_startup (struct usb_serial *serial)
 496 {
 497         struct cypress_private *priv;
 498         struct usb_serial_port *port = serial->port[0];
 499
 500         dbg("%s - port %d", __FUNCTION__, port->number);
 501
 502         priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
 503         if (!priv)
 504                 return -ENOMEM;
 505
 506         priv->comm_is_ok = !0;
 507         spin_lock_init(&priv->lock);
 508         priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
 509         if (priv->buf == NULL) {
 510                 kfree(priv);
 511                 return -ENOMEM;
 512         }
 513         init_waitqueue_head(&priv->delta_msr_wait);
 514
 515         usb_reset_configuration (serial->dev);
 516
 517         priv->cmd_ctrl = 0;
 518         priv->line_control = 0;
 519         priv->termios_initialized = 0;
 520         priv->rx_flags = 0;
 521         priv->cbr_mask = B300;
 522         if (interval > 0) {
 523                 priv->write_urb_interval = interval;
 524                 priv->read_urb_interval = interval;
 525                 dbg("%s - port %d read & write intervals forced to %d",
 526                     __FUNCTION__,port->number,interval);
 527         } else {
 528                 priv->write_urb_interval = port->interrupt_out_urb->interval;
 529                 priv->read_urb_interval = port->interrupt_in_urb->interval;
 530                 dbg("%s - port %d intervals: read=%d write=%d",
 531                     __FUNCTION__,port->number,
 532                     priv->read_urb_interval,priv->write_urb_interval);
 533         }
 534         usb_set_serial_port_data(port, priv);
 535
 536         return 0;
 537 }
 538
 539
 540 static int cypress_earthmate_startup (struct usb_serial *serial)
 541 {
 542         struct cypress_private *priv;
 543
 544         dbg("%s", __FUNCTION__);
 545
 546         if (generic_startup(serial)) {
 547                 dbg("%s - Failed setting up port %d", __FUNCTION__,
 548                                 serial->port[0]->number);
 549                 return 1;
 550         }
 551
 552         priv = usb_get_serial_port_data(serial->port[0]);
 553         priv->chiptype = CT_EARTHMATE;
 554
 555         return 0;
 556 } /* cypress_earthmate_startup */
 557
 558
 559 static int cypress_hidcom_startup (struct usb_serial *serial)
 560 {
 561         struct cypress_private *priv;
 562
 563         dbg("%s", __FUNCTION__);
 564
 565         if (generic_startup(serial)) {
 566                 dbg("%s - Failed setting up port %d", __FUNCTION__,
 567                                 serial->port[0]->number);
 568                 return 1;
 569         }
 570
 571         priv = usb_get_serial_port_data(serial->port[0]);
 572         priv->chiptype = CT_CYPHIDCOM;
 573
 574         return 0;
 575 } /* cypress_hidcom_startup */
 576
 577
 578 static int cypress_ca42v2_startup (struct usb_serial *serial)
 579 {
 580         struct cypress_private *priv;
 581
 582         dbg("%s", __FUNCTION__);
 583
 584         if (generic_startup(serial)) {
 585                 dbg("%s - Failed setting up port %d", __FUNCTION__,
 586                                 serial->port[0]->number);
 587                 return 1;
 588         }
 589
 590         priv = usb_get_serial_port_data(serial->port[0]);
 591         priv->chiptype = CT_CA42V2;
 592
 593         return 0;
 594 } /* cypress_ca42v2_startup */
 595
 596
 597 static void cypress_shutdown (struct usb_serial *serial)
 598 {
 599         struct cypress_private *priv;
 600
 601         dbg ("%s - port %d", __FUNCTION__, serial->port[0]->number);
 602
 603         /* all open ports are closed at this point */
 604
 605         priv = usb_get_serial_port_data(serial->port[0]);
 606
 607         if (priv) {
 608                 cypress_buf_free(priv->buf);
 609                 kfree(priv);
 610                 usb_set_serial_port_data(serial->port[0], NULL);
 611         }
 612 }
 613
 614
 615 static int cypress_open (struct usb_serial_port *port, struct file *filp)
 616 {
 617         struct cypress_private *priv = usb_get_serial_port_data(port);
 618         struct usb_serial *serial = port->serial;
 619         unsigned long flags;
 620         int result = 0;
 621
 622         dbg("%s - port %d", __FUNCTION__, port->number);
 623
 624         if (!priv->comm_is_ok)
 625                 return -EIO;
 626
 627         /* clear halts before open */
 628         usb_clear_halt(serial->dev, 0x81);
 629         usb_clear_halt(serial->dev, 0x02);
 630
 631         spin_lock_irqsave(&priv->lock, flags);
 632         /* reset read/write statistics */
 633         priv->bytes_in = 0;
 634         priv->bytes_out = 0;
 635         priv->cmd_count = 0;
 636         priv->rx_flags = 0;
 637         spin_unlock_irqrestore(&priv->lock, flags);
 638
 639         /* setting to zero could cause data loss */
 640         port->tty->low_latency = 1;
 641
 642         /* raise both lines and set termios */
 643         spin_lock_irqsave(&priv->lock, flags);
 644         priv->line_control = CONTROL_DTR | CONTROL_RTS;
 645         priv->cmd_ctrl = 1;
 646         spin_unlock_irqrestore(&priv->lock, flags);
 647         result = cypress_write(port, NULL, 0);
 648
 649         if (result) {
 650                 dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __FUNCTION__, result);
 651                 return result;
 652         } else
 653                 dbg("%s - success setting the control lines", __FUNCTION__);
 654
 655         cypress_set_termios(port, &priv->tmp_termios);
 656
 657         /* setup the port and start reading from the device */
 658         if(!port->interrupt_in_urb){
 659                 err("%s - interrupt_in_urb is empty!", __FUNCTION__);
 660                 return(-1);
 661         }
 662
 663         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 664                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 665                 port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
 666                 cypress_read_int_callback, port, priv->read_urb_interval);
 667         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 668
 669         if (result){
 670                 dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
 671                 cypress_set_dead(port);
 672         }
 673
 674         return result;
 675 } /* cypress_open */
 676
 677
 678 static void cypress_close(struct usb_serial_port *port, struct file * filp)
 679 {
 680         struct cypress_private *priv = usb_get_serial_port_data(port);
 681         unsigned int c_cflag;
 682         unsigned long flags;
 683         int bps;
 684         long timeout;
 685         wait_queue_t wait;
 686
 687         dbg("%s - port %d", __FUNCTION__, port->number);
 688
 689         /* wait for data to drain from buffer */
 690         spin_lock_irqsave(&priv->lock, flags);
 691         timeout = CYPRESS_CLOSING_WAIT;
 692         init_waitqueue_entry(&wait, current);
 693         add_wait_queue(&port->tty->write_wait, &wait);
 694         for (;;) {
 695                 set_current_state(TASK_INTERRUPTIBLE);
 696                 if (cypress_buf_data_avail(priv->buf) == 0
 697                 || timeout == 0 || signal_pending(current)
 698                 || !usb_get_intfdata(port->serial->interface))
 699                         break;
 700                 spin_unlock_irqrestore(&priv->lock, flags);
 701                 timeout = schedule_timeout(timeout);
 702                 spin_lock_irqsave(&priv->lock, flags);
 703         }
 704         set_current_state(TASK_RUNNING);
 705         remove_wait_queue(&port->tty->write_wait, &wait);
 706         /* clear out any remaining data in the buffer */
 707         cypress_buf_clear(priv->buf);
 708         spin_unlock_irqrestore(&priv->lock, flags);
 709
 710         /* wait for characters to drain from device */
 711         bps = tty_get_baud_rate(port->tty);
 712         if (bps > 1200)
 713                 timeout = max((HZ*2560)/bps,HZ/10);
 714         else
 715                 timeout = 2*HZ;
 716         schedule_timeout_interruptible(timeout);
 717
 718         dbg("%s - stopping urbs", __FUNCTION__);
 719         usb_kill_urb (port->interrupt_in_urb);
 720         usb_kill_urb (port->interrupt_out_urb);
 721
 722         if (port->tty) {
 723                 c_cflag = port->tty->termios->c_cflag;
 724                 if (c_cflag & HUPCL) {
 725                         /* drop dtr and rts */
 726                         priv = usb_get_serial_port_data(port);
 727                         spin_lock_irqsave(&priv->lock, flags);
 728                         priv->line_control = 0;
 729                         priv->cmd_ctrl = 1;
 730                         spin_unlock_irqrestore(&priv->lock, flags);
 731                         cypress_write(port, NULL, 0);
 732                 }
 733         }
 734
 735         if (stats)
 736                 dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 737                           priv->bytes_in, priv->bytes_out, priv->cmd_count);
 738 } /* cypress_close */
 739
 740
 741 static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, int count)
 742 {
 743         struct cypress_private *priv = usb_get_serial_port_data(port);
 744         unsigned long flags;
 745
 746         dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
 747
 748         /* line control commands, which need to be executed immediately,
 749            are not put into the buffer for obvious reasons.
 750          */
 751         if (priv->cmd_ctrl) {
 752                 count = 0;
 753                 goto finish;
 754         }
 755
 756         if (!count)
 757                 return count;
 758
 759         spin_lock_irqsave(&priv->lock, flags);
 760         count = cypress_buf_put(priv->buf, buf, count);
 761         spin_unlock_irqrestore(&priv->lock, flags);
 762
 763 finish:
 764         cypress_send(port);
 765
 766         return count;
 767 } /* cypress_write */
 768
 769
 770 static void cypress_send(struct usb_serial_port *port)
 771 {
 772         int count = 0, result, offset, actual_size;
 773         struct cypress_private *priv = usb_get_serial_port_data(port);
 774         unsigned long flags;
 775
 776         if (!priv->comm_is_ok)
 777                 return;
 778
 779         dbg("%s - port %d", __FUNCTION__, port->number);
 780         dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size);
 781
 782         spin_lock_irqsave(&priv->lock, flags);
 783         if (priv->write_urb_in_use) {
 784                 dbg("%s - can't write, urb in use", __FUNCTION__);
 785                 spin_unlock_irqrestore(&priv->lock, flags);
 786                 return;
 787         }
 788         spin_unlock_irqrestore(&priv->lock, flags);
 789
 790         /* clear buffer */
 791         memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);
 792
 793         spin_lock_irqsave(&priv->lock, flags);
 794         switch (port->interrupt_out_size) {
 795                 case 32:
 796                         /* this is for the CY7C64013... */
 797                         offset = 2;
 798                         port->interrupt_out_buffer[0] = priv->line_control;
 799                         break;
 800                 case 8:
 801                         /* this is for the CY7C63743... */
 802                         offset = 1;
 803                         port->interrupt_out_buffer[0] = priv->line_control;
 804                         break;
 805                 default:
 806                         dbg("%s - wrong packet size", __FUNCTION__);
 807                         spin_unlock_irqrestore(&priv->lock, flags);
 808                         return;
 809         }
 810
 811         if (priv->line_control & CONTROL_RESET)
 812                 priv->line_control &= ~CONTROL_RESET;
 813
 814         if (priv->cmd_ctrl) {
 815                 priv->cmd_count++;
 816                 dbg("%s - line control command being issued", __FUNCTION__);
 817                 spin_unlock_irqrestore(&priv->lock, flags);
 818                 goto send;
 819         } else
 820                 spin_unlock_irqrestore(&priv->lock, flags);
 821
 822         count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
 823                                 port->interrupt_out_size-offset);
 824
 825         if (count == 0) {
 826                 return;
 827         }
 828
 829         switch (port->interrupt_out_size) {
 830                 case 32:
 831                         port->interrupt_out_buffer[1] = count;
 832                         break;
 833                 case 8:
 834                         port->interrupt_out_buffer[0] |= count;
 835         }
 836
 837         dbg("%s - count is %d", __FUNCTION__, count);
 838
 839 send:
 840         spin_lock_irqsave(&priv->lock, flags);
 841         priv->write_urb_in_use = 1;
 842         spin_unlock_irqrestore(&priv->lock, flags);
 843
 844         if (priv->cmd_ctrl)
 845                 actual_size = 1;
 846         else
 847                 actual_size = count + (port->interrupt_out_size == 32 ? 2 : 1);
 848
 849         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size,
 850                               port->interrupt_out_urb->transfer_buffer);
 851
 852         usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
 853                 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
 854                 port->interrupt_out_buffer, port->interrupt_out_size,
 855                 cypress_write_int_callback, port, priv->write_urb_interval);
 856         result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
 857         if (result) {
 858                 dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
 859                         result);
 860                 priv->write_urb_in_use = 0;
 861                 cypress_set_dead(port);
 862         }
 863
 864         spin_lock_irqsave(&priv->lock, flags);
 865         if (priv->cmd_ctrl) {
 866                 priv->cmd_ctrl = 0;
 867         }
 868         priv->bytes_out += count; /* do not count the line control and size bytes */
 869         spin_unlock_irqrestore(&priv->lock, flags);
 870
 871         usb_serial_port_softint(port);
 872 } /* cypress_send */
 873
 874
 875 /* returns how much space is available in the soft buffer */
 876 static int cypress_write_room(struct usb_serial_port *port)
 877 {
 878         struct cypress_private *priv = usb_get_serial_port_data(port);
 879         int room = 0;
 880         unsigned long flags;
 881
 882         dbg("%s - port %d", __FUNCTION__, port->number);
 883
 884         spin_lock_irqsave(&priv->lock, flags);
 885         room = cypress_buf_space_avail(priv->buf);
 886         spin_unlock_irqrestore(&priv->lock, flags);
 887
 888         dbg("%s - returns %d", __FUNCTION__, room);
 889         return room;
 890 }
 891
 892
 893 static int cypress_tiocmget (struct usb_serial_port *port, struct file *file)
 894 {
 895         struct cypress_private *priv = usb_get_serial_port_data(port);
 896         __u8 status, control;
 897         unsigned int result = 0;
 898         unsigned long flags;
 899
 900         dbg("%s - port %d", __FUNCTION__, port->number);
 901
 902         spin_lock_irqsave(&priv->lock, flags);
 903         control = priv->line_control;
 904         status = priv->current_status;
 905         spin_unlock_irqrestore(&priv->lock, flags);
 906
 907         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
 908                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
 909                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 910                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 911                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
 912                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
 913
 914         dbg("%s - result = %x", __FUNCTION__, result);
 915
 916         return result;
 917 }
 918
 919
 920 static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
 921                                unsigned int set, unsigned int clear)
 922 {
 923         struct cypress_private *priv = usb_get_serial_port_data(port);
 924         unsigned long flags;
 925
 926         dbg("%s - port %d", __FUNCTION__, port->number);
 927
 928         spin_lock_irqsave(&priv->lock, flags);
 929         if (set & TIOCM_RTS)
 930                 priv->line_control |= CONTROL_RTS;
 931         if (set & TIOCM_DTR)
 932                 priv->line_control |= CONTROL_DTR;
 933         if (clear & TIOCM_RTS)
 934                 priv->line_control &= ~CONTROL_RTS;
 935         if (clear & TIOCM_DTR)
 936                 priv->line_control &= ~CONTROL_DTR;
 937         spin_unlock_irqrestore(&priv->lock, flags);
 938
 939         priv->cmd_ctrl = 1;
 940         return cypress_write(port, NULL, 0);
 941 }
 942
 943
 944 static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
 945 {
 946         struct cypress_private *priv = usb_get_serial_port_data(port);
 947
 948         dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
 949
 950         switch (cmd) {
 951                 case TIOCGSERIAL:
 952                         if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
 953                                 return -EFAULT;
 954                         }
 955                         return (0);
 956                         break;
 957                 case TIOCSSERIAL:
 958                         if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
 959                                 return -EFAULT;
 960                         }
 961                         /* here we need to call cypress_set_termios to invoke the new settings */
 962                         cypress_set_termios(port, &priv->tmp_termios);
 963                         return (0);
 964                         break;
 965                 /* these are called when setting baud rate from gpsd */
 966                 case TCGETS:
 967                         if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
 968                                 return -EFAULT;
 969                         }
 970                         return (0);
 971                         break;
 972                 case TCSETS:
 973                         if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
 974                                 return -EFAULT;
 975                         }
 976                         /* here we need to call cypress_set_termios to invoke the new settings */
 977                         cypress_set_termios(port, &priv->tmp_termios);
 978                         return (0);
 979                         break;
 980                 /* This code comes from drivers/char/serial.c and ftdi_sio.c */
 981                 case TIOCMIWAIT:
 982                         while (priv != NULL) {
 983                                 interruptible_sleep_on(&priv->delta_msr_wait);
 984                                 /* see if a signal did it */
 985                                 if (signal_pending(current))
 986                                         return -ERESTARTSYS;
 987                                 else {
 988                                         char diff = priv->diff_status;
 989
 990                                         if (diff == 0) {
 991                                                 return -EIO; /* no change => error */
 992                                         }
 993
 994                                         /* consume all events */
 995                                         priv->diff_status = 0;
 996
 997                                         /* return 0 if caller wanted to know about these bits */
 998                                         if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
 999                                              ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
1000                                              ((arg & TIOCM_CD) && (diff & UART_CD)) ||
1001                                              ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
1002                                                 return 0;
1003                                         }
1004                                         /* otherwise caller can't care less about what happened,
1005                                          * and so we continue to wait for more events.
1006                                          */
1007                                 }
1008                         }
1009                         return 0;
1010                         break;
1011                 default:
1012                         break;
1013         }
1014
1015         dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __FUNCTION__, cmd);
1016
1017         return -ENOIOCTLCMD;
1018 } /* cypress_ioctl */
1019
1020
1021 static void cypress_set_termios (struct usb_serial_port *port,
1022                 struct termios *old_termios)
1023 {
1024         struct cypress_private *priv = usb_get_serial_port_data(port);
1025         struct tty_struct *tty;
1026         int data_bits, stop_bits, parity_type, parity_enable;
1027         unsigned cflag, iflag, baud_mask;
1028         unsigned long flags;
1029         __u8 oldlines;
1030         int linechange = 0;
1031
1032         dbg("%s - port %d", __FUNCTION__, port->number);
1033
1034         tty = port->tty;
1035         if ((!tty) || (!tty->termios)) {
1036                 dbg("%s - no tty structures", __FUNCTION__);
1037                 return;
1038         }
1039
1040         spin_lock_irqsave(&priv->lock, flags);
1041         if (!priv->termios_initialized) {
1042                 if (priv->chiptype == CT_EARTHMATE) {
1043                         *(tty->termios) = tty_std_termios;
1044                         tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
1045                                 CLOCAL;
1046                 } else if (priv->chiptype == CT_CYPHIDCOM) {
1047                         *(tty->termios) = tty_std_termios;
1048                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1049                                 CLOCAL;
1050                 } else if (priv->chiptype == CT_CA42V2) {
1051                         *(tty->termios) = tty_std_termios;
1052                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1053                                 CLOCAL;
1054                 }
1055                 priv->termios_initialized = 1;
1056         }
1057         spin_unlock_irqrestore(&priv->lock, flags);
1058
1059         cflag = tty->termios->c_cflag;
1060         iflag = tty->termios->c_iflag;
1061
1062         /* check if there are new settings */
1063         if (old_termios) {
1064                 if ((cflag != old_termios->c_cflag) ||
1065                         (RELEVANT_IFLAG(iflag) !=
1066                          RELEVANT_IFLAG(old_termios->c_iflag))) {
1067                         dbg("%s - attempting to set new termios settings",
1068                                         __FUNCTION__);
1069                         /* should make a copy of this in case something goes
1070                          * wrong in the function, we can restore it */
1071                         spin_lock_irqsave(&priv->lock, flags);
1072                         priv->tmp_termios = *(tty->termios);
1073                         spin_unlock_irqrestore(&priv->lock, flags);
1074                 } else {
1075                         dbg("%s - nothing to do, exiting", __FUNCTION__);
1076                         return;
1077                 }
1078         } else
1079                 return;
1080
1081         /* set number of data bits, parity, stop bits */
1082         /* when parity is disabled the parity type bit is ignored */
1083
1084         /* 1 means 2 stop bits, 0 means 1 stop bit */
1085         stop_bits = cflag & CSTOPB ? 1 : 0;
1086
1087         if (cflag & PARENB) {
1088                 parity_enable = 1;
1089                 /* 1 means odd parity, 0 means even parity */
1090                 parity_type = cflag & PARODD ? 1 : 0;
1091         } else
1092                 parity_enable = parity_type = 0;
1093
1094         if (cflag & CSIZE) {
1095                 switch (cflag & CSIZE) {
1096                         case CS5:
1097                                 data_bits = 0;
1098                                 break;
1099                         case CS6:
1100                                 data_bits = 1;
1101                                 break;
1102                         case CS7:
1103                                 data_bits = 2;
1104                                 break;
1105                         case CS8:
1106                                 data_bits = 3;
1107                                 break;
1108                         default:
1109                                 err("%s - CSIZE was set, but not CS5-CS8",
1110                                                 __FUNCTION__);
1111                                 data_bits = 3;
1112                 }
1113         } else
1114                 data_bits = 3;
1115
1116         spin_lock_irqsave(&priv->lock, flags);
1117         oldlines = priv->line_control;
1118         if ((cflag & CBAUD) == B0) {
1119                 /* drop dtr and rts */
1120                 dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
1121                 baud_mask = B0;
1122                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
1123         } else {
1124                 baud_mask = (cflag & CBAUD);
1125                 switch(baud_mask) {
1126                         case B300:
1127                                 dbg("%s - setting baud 300bps", __FUNCTION__);
1128                                 break;
1129                         case B600:
1130                                 dbg("%s - setting baud 600bps", __FUNCTION__);
1131                                 break;
1132                         case B1200:
1133                                 dbg("%s - setting baud 1200bps", __FUNCTION__);
1134                                 break;
1135                         case B2400:
1136                                 dbg("%s - setting baud 2400bps", __FUNCTION__);
1137                                 break;
1138                         case B4800:
1139                                 dbg("%s - setting baud 4800bps", __FUNCTION__);
1140                                 break;
1141                         case B9600:
1142                                 dbg("%s - setting baud 9600bps", __FUNCTION__);
1143                                 break;
1144                         case B19200:
1145                                 dbg("%s - setting baud 19200bps", __FUNCTION__);
1146                                 break;
1147                         case B38400:
1148                                 dbg("%s - setting baud 38400bps", __FUNCTION__);
1149                                 break;
1150                         case B57600:
1151                                 dbg("%s - setting baud 57600bps", __FUNCTION__);
1152                                 break;
1153                         case B115200:
1154                                 dbg("%s - setting baud 115200bps", __FUNCTION__);
1155                                 break;
1156                         default:
1157                                 dbg("%s - unknown masked baud rate", __FUNCTION__);
1158                 }
1159                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1160         }
1161         spin_unlock_irqrestore(&priv->lock, flags);
1162
1163         dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1164                         "%d data_bits (+5)", __FUNCTION__, stop_bits,
1165                         parity_enable, parity_type, data_bits);
1166
1167         cypress_serial_control(port, baud_mask, data_bits, stop_bits,
1168                         parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
1169
1170         /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1171          * filled into the private structure this should confirm that all is
1172          * working if it returns what we just set */
1173         cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1174
1175         /* Here we can define custom tty settings for devices; the main tty
1176          * termios flag base comes from empeg.c */
1177
1178         spin_lock_irqsave(&priv->lock, flags);
1179         if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
1180                 dbg("Using custom termios settings for a baud rate of "
1181                                 "4800bps.");
1182                 /* define custom termios settings for NMEA protocol */
1183
1184                 tty->termios->c_iflag /* input modes - */
1185                         &= ~(IGNBRK  /* disable ignore break */
1186                         | BRKINT     /* disable break causes interrupt */
1187                         | PARMRK     /* disable mark parity errors */
1188                         | ISTRIP     /* disable clear high bit of input char */
1189                         | INLCR      /* disable translate NL to CR */
1190                         | IGNCR      /* disable ignore CR */
1191                         | ICRNL      /* disable translate CR to NL */
1192                         | IXON);     /* disable enable XON/XOFF flow control */
1193
1194                 tty->termios->c_oflag /* output modes */
1195                         &= ~OPOST;    /* disable postprocess output char */
1196
1197                 tty->termios->c_lflag /* line discipline modes */
1198                         &= ~(ECHO     /* disable echo input characters */
1199                         | ECHONL      /* disable echo new line */
1200                         | ICANON      /* disable erase, kill, werase, and rprnt
1201                                          special characters */
1202                         | ISIG        /* disable interrupt, quit, and suspend
1203                                          special characters */
1204                         | IEXTEN);    /* disable non-POSIX special characters */
1205         } /* CT_CYPHIDCOM: Application should handle this for device */
1206
1207         linechange = (priv->line_control != oldlines);
1208         spin_unlock_irqrestore(&priv->lock, flags);
1209
1210         /* if necessary, set lines */
1211         if (linechange) {
1212                 priv->cmd_ctrl = 1;
1213                 cypress_write(port, NULL, 0);
1214         }
1215 } /* cypress_set_termios */
1216
1217
1218 /* returns amount of data still left in soft buffer */
1219 static int cypress_chars_in_buffer(struct usb_serial_port *port)
1220 {
1221         struct cypress_private *priv = usb_get_serial_port_data(port);
1222         int chars = 0;
1223         unsigned long flags;
1224
1225         dbg("%s - port %d", __FUNCTION__, port->number);
1226
1227         spin_lock_irqsave(&priv->lock, flags);
1228         chars = cypress_buf_data_avail(priv->buf);
1229         spin_unlock_irqrestore(&priv->lock, flags);
1230
1231         dbg("%s - returns %d", __FUNCTION__, chars);
1232         return chars;
1233 }
1234
1235
1236 static void cypress_throttle (struct usb_serial_port *port)
1237 {
1238         struct cypress_private *priv = usb_get_serial_port_data(port);
1239         unsigned long flags;
1240
1241         dbg("%s - port %d", __FUNCTION__, port->number);
1242
1243         spin_lock_irqsave(&priv->lock, flags);
1244         priv->rx_flags = THROTTLED;
1245         spin_unlock_irqrestore(&priv->lock, flags);
1246 }
1247
1248
1249 static void cypress_unthrottle (struct usb_serial_port *port)
1250 {
1251         struct cypress_private *priv = usb_get_serial_port_data(port);
1252         int actually_throttled, result;
1253         unsigned long flags;
1254
1255         dbg("%s - port %d", __FUNCTION__, port->number);
1256
1257         spin_lock_irqsave(&priv->lock, flags);
1258         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1259         priv->rx_flags = 0;
1260         spin_unlock_irqrestore(&priv->lock, flags);
1261
1262         if (!priv->comm_is_ok)
1263                 return;
1264
1265         if (actually_throttled) {
1266                 port->interrupt_in_urb->dev = port->serial->dev;
1267
1268                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1269                 if (result) {
1270                         dev_err(&port->dev, "%s - failed submitting read urb, "
1271                                         "error %d\n", __FUNCTION__, result);
1272                         cypress_set_dead(port);
1273                 }
1274         }
1275 }
1276
1277
1278 static void cypress_read_int_callback(struct urb *urb)
1279 {
1280         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1281         struct cypress_private *priv = usb_get_serial_port_data(port);
1282         struct tty_struct *tty;
1283         unsigned char *data = urb->transfer_buffer;
1284         unsigned long flags;
1285         char tty_flag = TTY_NORMAL;
1286         int havedata = 0;
1287         int bytes = 0;
1288         int result;
1289         int i = 0;
1290
1291         dbg("%s - port %d", __FUNCTION__, port->number);
1292
1293         switch (urb->status) {
1294         case 0: /* success */
1295                 break;
1296         case -ECONNRESET:
1297         case -ENOENT:
1298         case -ESHUTDOWN:
1299                 /* precursor to disconnect so just go away */
1300                 return;
1301         case -EPIPE:
1302                 usb_clear_halt(port->serial->dev,0x81);
1303                 break;
1304         default:
1305                 /* something ugly is going on... */
1306                 dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
1307                         __FUNCTION__,urb->status);
1308                 cypress_set_dead(port);
1309                 return;
1310         }
1311
1312         spin_lock_irqsave(&priv->lock, flags);
1313         if (priv->rx_flags & THROTTLED) {
1314                 dbg("%s - now throttling", __FUNCTION__);
1315                 priv->rx_flags |= ACTUALLY_THROTTLED;
1316                 spin_unlock_irqrestore(&priv->lock, flags);
1317                 return;
1318         }
1319         spin_unlock_irqrestore(&priv->lock, flags);
1320
1321         tty = port->tty;
1322         if (!tty) {
1323                 dbg("%s - bad tty pointer - exiting", __FUNCTION__);
1324                 return;
1325         }
1326
1327         spin_lock_irqsave(&priv->lock, flags);
1328         switch(urb->actual_length) {
1329                 case 32:
1330                         /* This is for the CY7C64013... */
1331                         priv->current_status = data[0] & 0xF8;
1332                         bytes = data[1] + 2;
1333                         i = 2;
1334                         if (bytes > 2)
1335                                 havedata = 1;
1336                         break;
1337                 case 8:
1338                         /* This is for the CY7C63743... */
1339                         priv->current_status = data[0] & 0xF8;
1340                         bytes = (data[0] & 0x07) + 1;
1341                         i = 1;
1342                         if (bytes > 1)
1343                                 havedata = 1;
1344                         break;
1345                 default:
1346                         dbg("%s - wrong packet size - received %d bytes",
1347                                         __FUNCTION__, urb->actual_length);
1348                         spin_unlock_irqrestore(&priv->lock, flags);
1349                         goto continue_read;
1350         }
1351         spin_unlock_irqrestore(&priv->lock, flags);
1352
1353         usb_serial_debug_data (debug, &port->dev, __FUNCTION__,
1354                         urb->actual_length, data);
1355
1356         spin_lock_irqsave(&priv->lock, flags);
1357         /* check to see if status has changed */
1358         if (priv != NULL) {
1359                 if (priv->current_status != priv->prev_status) {
1360                         priv->diff_status |= priv->current_status ^
1361                                 priv->prev_status;
1362                         wake_up_interruptible(&priv->delta_msr_wait);
1363                         priv->prev_status = priv->current_status;
1364                 }
1365         }
1366         spin_unlock_irqrestore(&priv->lock, flags);
1367
1368         /* hangup, as defined in acm.c... this might be a bad place for it
1369          * though */
1370         if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1371                         !(priv->current_status & UART_CD)) {
1372                 dbg("%s - calling hangup", __FUNCTION__);
1373                 tty_hangup(tty);
1374                 goto continue_read;
1375         }
1376
1377         /* There is one error bit... I'm assuming it is a parity error
1378          * indicator as the generic firmware will set this bit to 1 if a
1379          * parity error occurs.
1380          * I can not find reference to any other error events. */
1381         spin_lock_irqsave(&priv->lock, flags);
1382         if (priv->current_status & CYP_ERROR) {
1383                 spin_unlock_irqrestore(&priv->lock, flags);
1384                 tty_flag = TTY_PARITY;
1385                 dbg("%s - Parity Error detected", __FUNCTION__);
1386         } else
1387                 spin_unlock_irqrestore(&priv->lock, flags);
1388
1389         /* process read if there is data other than line status */
1390         if (tty && (bytes > i)) {
1391                 bytes = tty_buffer_request_room(tty, bytes);
1392                 for (; i < bytes ; ++i) {
1393                         dbg("pushing byte number %d - %d - %c", i, data[i],
1394                                         data[i]);
1395                         tty_insert_flip_char(tty, data[i], tty_flag);
1396                 }
1397                 tty_flip_buffer_push(port->tty);
1398         }
1399
1400         spin_lock_irqsave(&priv->lock, flags);
1401         /* control and status byte(s) are also counted */
1402         priv->bytes_in += bytes;
1403         spin_unlock_irqrestore(&priv->lock, flags);
1404
1405 continue_read:
1406
1407         /* Continue trying to always read... unless the port has closed. */
1408
1409         if (port->open_count > 0 && priv->comm_is_ok) {
1410                 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1411                                 usb_rcvintpipe(port->serial->dev,
1412                                         port->interrupt_in_endpointAddress),
1413                                 port->interrupt_in_urb->transfer_buffer,
1414                                 port->interrupt_in_urb->transfer_buffer_length,
1415                                 cypress_read_int_callback, port, priv->read_urb_interval);
1416                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1417                 if (result) {
1418                         dev_err(&urb->dev->dev, "%s - failed resubmitting "
1419                                         "read urb, error %d\n", __FUNCTION__,
1420                                         result);
1421                         cypress_set_dead(port);
1422                 }
1423         }
1424
1425         return;
1426 } /* cypress_read_int_callback */
1427
1428
1429 static void cypress_write_int_callback(struct urb *urb)
1430 {
1431         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1432         struct cypress_private *priv = usb_get_serial_port_data(port);
1433         int result;
1434
1435         dbg("%s - port %d", __FUNCTION__, port->number);
1436
1437         switch (urb->status) {
1438                 case 0:
1439                         /* success */
1440                         break;
1441                 case -ECONNRESET:
1442                 case -ENOENT:
1443                 case -ESHUTDOWN:
1444                         /* this urb is terminated, clean up */
1445                         dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
1446                         priv->write_urb_in_use = 0;
1447                         return;
1448                 case -EPIPE: /* no break needed; clear halt and resubmit */
1449                         if (!priv->comm_is_ok)
1450                                 break;
1451                         usb_clear_halt(port->serial->dev, 0x02);
1452                         /* error in the urb, so we have to resubmit it */
1453                         dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
1454                         port->interrupt_out_urb->transfer_buffer_length = 1;
1455                         port->interrupt_out_urb->dev = port->serial->dev;
1456                         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1457                         if (!result)
1458                                 return;
1459                         dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
1460                                 __FUNCTION__, result);
1461                         cypress_set_dead(port);
1462                         break;
1463                 default:
1464                         dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
1465                                 __FUNCTION__,urb->status);
1466                         cypress_set_dead(port);
1467                         break;
1468         }
1469
1470         priv->write_urb_in_use = 0;
1471
1472         /* send any buffered data */
1473         cypress_send(port);
1474 }
1475
1476
1477 /*****************************************************************************
1478  * Write buffer functions - buffering code from pl2303 used
1479  *****************************************************************************/
1480
1481 /*
1482  * cypress_buf_alloc
1483  *
1484  * Allocate a circular buffer and all associated memory.
1485  */
1486
1487 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1488 {
1489
1490         struct cypress_buf *cb;
1491
1492
1493         if (size == 0)
1494                 return NULL;
1495
1496         cb = (struct cypress_buf *)kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1497         if (cb == NULL)
1498                 return NULL;
1499
1500         cb->buf_buf = kmalloc(size, GFP_KERNEL);
1501         if (cb->buf_buf == NULL) {
1502                 kfree(cb);
1503                 return NULL;
1504         }
1505
1506         cb->buf_size = size;
1507         cb->buf_get = cb->buf_put = cb->buf_buf;
1508
1509         return cb;
1510
1511 }
1512
1513
1514 /*
1515  * cypress_buf_free
1516  *
1517  * Free the buffer and all associated memory.
1518  */
1519
1520 static void cypress_buf_free(struct cypress_buf *cb)
1521 {
1522         if (cb) {
1523                 kfree(cb->buf_buf);
1524                 kfree(cb);
1525         }
1526 }
1527
1528
1529 /*
1530  * cypress_buf_clear
1531  *
1532  * Clear out all data in the circular buffer.
1533  */
1534
1535 static void cypress_buf_clear(struct cypress_buf *cb)
1536 {
1537         if (cb != NULL)
1538                 cb->buf_get = cb->buf_put;
1539                 /* equivalent to a get of all data available */
1540 }
1541
1542
1543 /*
1544  * cypress_buf_data_avail
1545  *
1546  * Return the number of bytes of data available in the circular
1547  * buffer.
1548  */
1549
1550 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1551 {
1552         if (cb != NULL)
1553                 return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
1554         else
1555                 return 0;
1556 }
1557
1558
1559 /*
1560  * cypress_buf_space_avail
1561  *
1562  * Return the number of bytes of space available in the circular
1563  * buffer.
1564  */
1565
1566 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1567 {
1568         if (cb != NULL)
1569                 return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
1570         else
1571                 return 0;
1572 }
1573
1574
1575 /*
1576  * cypress_buf_put
1577  *
1578  * Copy data data from a user buffer and put it into the circular buffer.
1579  * Restrict to the amount of space available.
1580  *
1581  * Return the number of bytes copied.
1582  */
1583
1584 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1585         unsigned int count)
1586 {
1587
1588         unsigned int len;
1589
1590
1591         if (cb == NULL)
1592                 return 0;
1593
1594         len  = cypress_buf_space_avail(cb);
1595         if (count > len)
1596                 count = len;
1597
1598         if (count == 0)
1599                 return 0;
1600
1601         len = cb->buf_buf + cb->buf_size - cb->buf_put;
1602         if (count > len) {
1603                 memcpy(cb->buf_put, buf, len);
1604                 memcpy(cb->buf_buf, buf+len, count - len);
1605                 cb->buf_put = cb->buf_buf + count - len;
1606         } else {
1607                 memcpy(cb->buf_put, buf, count);
1608                 if (count < len)
1609                         cb->buf_put += count;
1610                 else /* count == len */
1611                         cb->buf_put = cb->buf_buf;
1612         }
1613
1614         return count;
1615
1616 }
1617
1618
1619 /*
1620  * cypress_buf_get
1621  *
1622  * Get data from the circular buffer and copy to the given buffer.
1623  * Restrict to the amount of data available.
1624  *
1625  * Return the number of bytes copied.
1626  */
1627
1628 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1629         unsigned int count)
1630 {
1631
1632         unsigned int len;
1633
1634
1635         if (cb == NULL)
1636                 return 0;
1637
1638         len = cypress_buf_data_avail(cb);
1639         if (count > len)
1640                 count = len;
1641
1642         if (count == 0)
1643                 return 0;
1644
1645         len = cb->buf_buf + cb->buf_size - cb->buf_get;
1646         if (count > len) {
1647                 memcpy(buf, cb->buf_get, len);
1648                 memcpy(buf+len, cb->buf_buf, count - len);
1649                 cb->buf_get = cb->buf_buf + count - len;
1650         } else {
1651                 memcpy(buf, cb->buf_get, count);
1652                 if (count < len)
1653                         cb->buf_get += count;
1654                 else /* count == len */
1655                         cb->buf_get = cb->buf_buf;
1656         }
1657
1658         return count;
1659
1660 }
1661
1662 /*****************************************************************************
1663  * Module functions
1664  *****************************************************************************/
1665
1666 static int __init cypress_init(void)
1667 {
1668         int retval;
1669
1670         dbg("%s", __FUNCTION__);
1671
1672         retval = usb_serial_register(&cypress_earthmate_device);
1673         if (retval)
1674                 goto failed_em_register;
1675         retval = usb_serial_register(&cypress_hidcom_device);
1676         if (retval)
1677                 goto failed_hidcom_register;
1678         retval = usb_serial_register(&cypress_ca42v2_device);
1679         if (retval)
1680                 goto failed_ca42v2_register;
1681         retval = usb_register(&cypress_driver);
1682         if (retval)
1683                 goto failed_usb_register;
1684
1685         info(DRIVER_DESC " " DRIVER_VERSION);
1686         return 0;
1687 failed_usb_register:
1688         usb_deregister(&cypress_driver);
1689 failed_ca42v2_register:
1690         usb_serial_deregister(&cypress_ca42v2_device);
1691 failed_hidcom_register:
1692         usb_serial_deregister(&cypress_hidcom_device);
1693 failed_em_register:
1694         usb_serial_deregister(&cypress_earthmate_device);
1695
1696         return retval;
1697 }
1698
1699
1700 static void __exit cypress_exit (void)
1701 {
1702         dbg("%s", __FUNCTION__);
1703
1704         usb_deregister (&cypress_driver);
1705         usb_serial_deregister (&cypress_earthmate_device);
1706         usb_serial_deregister (&cypress_hidcom_device);
1707         usb_serial_deregister (&cypress_ca42v2_device);
1708 }
1709
1710
1711 module_init(cypress_init);
1712 module_exit(cypress_exit);
1713
1714 MODULE_AUTHOR( DRIVER_AUTHOR );
1715 MODULE_DESCRIPTION( DRIVER_DESC );
1716 MODULE_VERSION( DRIVER_VERSION );
1717 MODULE_LICENSE("GPL");
1718
1719 module_param(debug, bool, S_IRUGO | S_IWUSR);
1720 MODULE_PARM_DESC(debug, "Debug enabled or not");
1721 module_param(stats, bool, S_IRUGO | S_IWUSR);
1722 MODULE_PARM_DESC(stats, "Enable statistics or not");
1723 module_param(interval, int, S_IRUGO | S_IWUSR);
1724 MODULE_PARM_DESC(interval, "Overrides interrupt interval");