git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/ti_usb_3410_5052.c

   1 /* vi: ts=8 sw=8
   2  *
   3  * TI 3410/5052 USB Serial Driver
   4  *
   5  * Copyright (C) 2004 Texas Instruments
   6  *
   7  * This driver is based on the Linux io_ti driver, which is
   8  *   Copyright (C) 2000-2002 Inside Out Networks
   9  *   Copyright (C) 2001-2002 Greg Kroah-Hartman
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  *
  16  * For questions or problems with this driver, contact Texas Instruments
  17  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  18  * Peter Berger <pberger@brimson.com>.
  19  *
  20  * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
  21  * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
  22  * configuration.
  23  *
  24  * #!/bin/bash
  25  *
  26  * BOOT_CONFIG=1
  27  * ACTIVE_CONFIG=2
  28  *
  29  * if [[ "$ACTION" != "add" ]]
  30  * then
  31  *      exit
  32  * fi
  33  *
  34  * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
  35  *
  36  * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
  37  * then
  38  *      exit
  39  * fi
  40  *
  41  * PRODUCT=${PRODUCT%/?*}               # delete version
  42  * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
  43  * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
  44  *
  45  * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
  46  *
  47  * function scan() {
  48  *      s=$1
  49  *      shift
  50  *      for i
  51  *      do
  52  *              if [[ $s -eq $i ]]
  53  *              then
  54  *                      return 0
  55  *              fi
  56  *      done
  57  *      return 1
  58  * }
  59  *
  60  * IFS=$IFS,
  61  *
  62  * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
  63  * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
  64  * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
  65  * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
  66  * then
  67  *      echo $ACTIVE_CONFIG > $CONFIG_PATH
  68  * fi
  69  */
  70
  71 #include <linux/kernel.h>
  72 #include <linux/errno.h>
  73 #include <linux/init.h>
  74 #include <linux/slab.h>
  75 #include <linux/tty.h>
  76 #include <linux/tty_driver.h>
  77 #include <linux/tty_flip.h>
  78 #include <linux/module.h>
  79 #include <linux/spinlock.h>
  80 #include <linux/ioctl.h>
  81 #include <linux/serial.h>
  82 #include <linux/circ_buf.h>
  83 #include <asm/uaccess.h>
  84 #include <asm/semaphore.h>
  85 #include <linux/usb.h>
  86 #include <linux/usb/serial.h>
  87
  88 #include "ti_usb_3410_5052.h"
  89 #include "ti_fw_3410.h"         /* firmware image for 3410 */
  90 #include "ti_fw_5052.h"         /* firmware image for 5052 */
  91
  92
  93 /* Defines */
  94
  95 #define TI_DRIVER_VERSION       "v0.9"
  96 #define TI_DRIVER_AUTHOR        "Al Borchers <alborchers@steinerpoint.com>"
  97 #define TI_DRIVER_DESC          "TI USB 3410/5052 Serial Driver"
  98
  99 #define TI_FIRMWARE_BUF_SIZE    16284
 100
 101 #define TI_WRITE_BUF_SIZE       1024
 102
 103 #define TI_TRANSFER_TIMEOUT     2
 104
 105 #define TI_DEFAULT_LOW_LATENCY  0
 106 #define TI_DEFAULT_CLOSING_WAIT 4000            /* in .01 secs */
 107
 108 /* supported setserial flags */
 109 #define TI_SET_SERIAL_FLAGS     (ASYNC_LOW_LATENCY)
 110
 111 /* read urb states */
 112 #define TI_READ_URB_RUNNING     0
 113 #define TI_READ_URB_STOPPING    1
 114 #define TI_READ_URB_STOPPED     2
 115
 116 #define TI_EXTRA_VID_PID_COUNT  5
 117
 118
 119 /* Structures */
 120
 121 struct ti_port {
 122         int                     tp_is_open;
 123         __u8                    tp_msr;
 124         __u8                    tp_lsr;
 125         __u8                    tp_shadow_mcr;
 126         __u8                    tp_uart_mode;   /* 232 or 485 modes */
 127         unsigned int            tp_uart_base_addr;
 128         int                     tp_flags;
 129         int                     tp_closing_wait;/* in .01 secs */
 130         struct async_icount     tp_icount;
 131         wait_queue_head_t       tp_msr_wait;    /* wait for msr change */
 132         wait_queue_head_t       tp_write_wait;
 133         struct ti_device        *tp_tdev;
 134         struct usb_serial_port  *tp_port;
 135         spinlock_t              tp_lock;
 136         int                     tp_read_urb_state;
 137         int                     tp_write_urb_in_use;
 138         struct circ_buf         *tp_write_buf;
 139 };
 140
 141 struct ti_device {
 142         struct semaphore        td_open_close_sem;
 143         int                     td_open_port_count;
 144         struct usb_serial       *td_serial;
 145         int                     td_is_3410;
 146         int                     td_urb_error;
 147 };
 148
 149
 150 /* Function Declarations */
 151
 152 static int ti_startup(struct usb_serial *serial);
 153 static void ti_shutdown(struct usb_serial *serial);
 154 static int ti_open(struct usb_serial_port *port, struct file *file);
 155 static void ti_close(struct usb_serial_port *port, struct file *file);
 156 static int ti_write(struct usb_serial_port *port, const unsigned char *data,
 157         int count);
 158 static int ti_write_room(struct usb_serial_port *port);
 159 static int ti_chars_in_buffer(struct usb_serial_port *port);
 160 static void ti_throttle(struct usb_serial_port *port);
 161 static void ti_unthrottle(struct usb_serial_port *port);
 162 static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
 163 static void ti_set_termios(struct usb_serial_port *port,
 164         struct termios *old_termios);
 165 static int ti_tiocmget(struct usb_serial_port *port, struct file *file);
 166 static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
 167         unsigned int set, unsigned int clear);
 168 static void ti_break(struct usb_serial_port *port, int break_state);
 169 static void ti_interrupt_callback(struct urb *urb);
 170 static void ti_bulk_in_callback(struct urb *urb);
 171 static void ti_bulk_out_callback(struct urb *urb);
 172
 173 static void ti_recv(struct device *dev, struct tty_struct *tty,
 174         unsigned char *data, int length);
 175 static void ti_send(struct ti_port *tport);
 176 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
 177 static int ti_get_lsr(struct ti_port *tport);
 178 static int ti_get_serial_info(struct ti_port *tport,
 179         struct serial_struct __user *ret_arg);
 180 static int ti_set_serial_info(struct ti_port *tport,
 181         struct serial_struct __user *new_arg);
 182 static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
 183
 184 static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush);
 185
 186 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
 187 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
 188
 189 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
 190         __u16 moduleid, __u16 value, __u8 *data, int size);
 191 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 192         __u16 moduleid, __u16 value, __u8 *data, int size);
 193
 194 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 195         __u8 mask, __u8 byte);
 196
 197 static int ti_download_firmware(struct ti_device *tdev,
 198         unsigned char *firmware, unsigned int firmware_size);
 199
 200 /* circular buffer */
 201 static struct circ_buf *ti_buf_alloc(void);
 202 static void ti_buf_free(struct circ_buf *cb);
 203 static void ti_buf_clear(struct circ_buf *cb);
 204 static int ti_buf_data_avail(struct circ_buf *cb);
 205 static int ti_buf_space_avail(struct circ_buf *cb);
 206 static int ti_buf_put(struct circ_buf *cb, const char *buf, int count);
 207 static int ti_buf_get(struct circ_buf *cb, char *buf, int count);
 208
 209
 210 /* Data */
 211
 212 /* module parameters */
 213 static int debug;
 214 static int low_latency = TI_DEFAULT_LOW_LATENCY;
 215 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
 216 static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
 217 static int vendor_3410_count;
 218 static ushort product_3410[TI_EXTRA_VID_PID_COUNT];
 219 static int product_3410_count;
 220 static ushort vendor_5052[TI_EXTRA_VID_PID_COUNT];
 221 static int vendor_5052_count;
 222 static ushort product_5052[TI_EXTRA_VID_PID_COUNT];
 223 static int product_5052_count;
 224
 225 /* supported devices */
 226 /* the array dimension is the number of default entries plus */
 227 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 228 /* null entry */
 229 static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = {
 230         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 231 };
 232
 233 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
 234         { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 235         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 236         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 237         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 238 };
 239
 240 static struct usb_device_id ti_id_table_combined[] = {
 241         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 242         { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 243         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 244         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 245         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 246         { }
 247 };
 248
 249 static struct usb_driver ti_usb_driver = {
 250         .name                   = "ti_usb_3410_5052",
 251         .probe                  = usb_serial_probe,
 252         .disconnect             = usb_serial_disconnect,
 253         .id_table               = ti_id_table_combined,
 254         .no_dynamic_id =        1,
 255 };
 256
 257 static struct usb_serial_driver ti_1port_device = {
 258         .driver = {
 259                 .owner          = THIS_MODULE,
 260                 .name           = "ti_usb_3410_5052_1",
 261         },
 262         .description            = "TI USB 3410 1 port adapter",
 263         .id_table               = ti_id_table_3410,
 264         .num_interrupt_in       = 1,
 265         .num_bulk_in            = 1,
 266         .num_bulk_out           = 1,
 267         .num_ports              = 1,
 268         .attach                 = ti_startup,
 269         .shutdown               = ti_shutdown,
 270         .open                   = ti_open,
 271         .close                  = ti_close,
 272         .write                  = ti_write,
 273         .write_room             = ti_write_room,
 274         .chars_in_buffer        = ti_chars_in_buffer,
 275         .throttle               = ti_throttle,
 276         .unthrottle             = ti_unthrottle,
 277         .ioctl                  = ti_ioctl,
 278         .set_termios            = ti_set_termios,
 279         .tiocmget               = ti_tiocmget,
 280         .tiocmset               = ti_tiocmset,
 281         .break_ctl              = ti_break,
 282         .read_int_callback      = ti_interrupt_callback,
 283         .read_bulk_callback     = ti_bulk_in_callback,
 284         .write_bulk_callback    = ti_bulk_out_callback,
 285 };
 286
 287 static struct usb_serial_driver ti_2port_device = {
 288         .driver = {
 289                 .owner          = THIS_MODULE,
 290                 .name           = "ti_usb_3410_5052_2",
 291         },
 292         .description            = "TI USB 5052 2 port adapter",
 293         .id_table               = ti_id_table_5052,
 294         .num_interrupt_in       = 1,
 295         .num_bulk_in            = 2,
 296         .num_bulk_out           = 2,
 297         .num_ports              = 2,
 298         .attach                 = ti_startup,
 299         .shutdown               = ti_shutdown,
 300         .open                   = ti_open,
 301         .close                  = ti_close,
 302         .write                  = ti_write,
 303         .write_room             = ti_write_room,
 304         .chars_in_buffer        = ti_chars_in_buffer,
 305         .throttle               = ti_throttle,
 306         .unthrottle             = ti_unthrottle,
 307         .ioctl                  = ti_ioctl,
 308         .set_termios            = ti_set_termios,
 309         .tiocmget               = ti_tiocmget,
 310         .tiocmset               = ti_tiocmset,
 311         .break_ctl              = ti_break,
 312         .read_int_callback      = ti_interrupt_callback,
 313         .read_bulk_callback     = ti_bulk_in_callback,
 314         .write_bulk_callback    = ti_bulk_out_callback,
 315 };
 316
 317
 318 /* Module */
 319
 320 MODULE_AUTHOR(TI_DRIVER_AUTHOR);
 321 MODULE_DESCRIPTION(TI_DRIVER_DESC);
 322 MODULE_VERSION(TI_DRIVER_VERSION);
 323 MODULE_LICENSE("GPL");
 324
 325 module_param(debug, bool, S_IRUGO | S_IWUSR);
 326 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
 327
 328 module_param(low_latency, bool, S_IRUGO | S_IWUSR);
 329 MODULE_PARM_DESC(low_latency, "TTY low_latency flag, 0=off, 1=on, default is off");
 330
 331 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 332 MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000");
 333
 334 module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO);
 335 MODULE_PARM_DESC(vendor_3410, "Vendor ids for 3410 based devices, 1-5 short integers");
 336 module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO);
 337 MODULE_PARM_DESC(product_3410, "Product ids for 3410 based devices, 1-5 short integers");
 338 module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO);
 339 MODULE_PARM_DESC(vendor_5052, "Vendor ids for 5052 based devices, 1-5 short integers");
 340 module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO);
 341 MODULE_PARM_DESC(product_5052, "Product ids for 5052 based devices, 1-5 short integers");
 342
 343 MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
 344
 345
 346 /* Functions */
 347
 348 static int __init ti_init(void)
 349 {
 350         int i,j;
 351         int ret;
 352
 353         /* insert extra vendor and product ids */
 354         j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
 355         for (i=0; i<min(vendor_3410_count,product_3410_count); i++,j++) {
 356                 ti_id_table_3410[j].idVendor = vendor_3410[i];
 357                 ti_id_table_3410[j].idProduct = product_3410[i];
 358                 ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 359         }
 360         j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
 361         for (i=0; i<min(vendor_5052_count,product_5052_count); i++,j++) {
 362                 ti_id_table_5052[j].idVendor = vendor_5052[i];
 363                 ti_id_table_5052[j].idProduct = product_5052[i];
 364                 ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 365         }
 366
 367         ret = usb_serial_register(&ti_1port_device);
 368         if (ret)
 369                 goto failed_1port;
 370         ret = usb_serial_register(&ti_2port_device);
 371         if (ret)
 372                 goto failed_2port;
 373
 374         ret = usb_register(&ti_usb_driver);
 375         if (ret)
 376                 goto failed_usb;
 377
 378         info(TI_DRIVER_DESC " " TI_DRIVER_VERSION);
 379
 380         return 0;
 381
 382 failed_usb:
 383         usb_serial_deregister(&ti_2port_device);
 384 failed_2port:
 385         usb_serial_deregister(&ti_1port_device);
 386 failed_1port:
 387         return ret;
 388 }
 389
 390
 391 static void __exit ti_exit(void)
 392 {
 393         usb_serial_deregister(&ti_1port_device);
 394         usb_serial_deregister(&ti_2port_device);
 395         usb_deregister(&ti_usb_driver);
 396 }
 397
 398
 399 module_init(ti_init);
 400 module_exit(ti_exit);
 401
 402
 403 static int ti_startup(struct usb_serial *serial)
 404 {
 405         struct ti_device *tdev;
 406         struct ti_port *tport;
 407         struct usb_device *dev = serial->dev;
 408         int status;
 409         int i;
 410
 411
 412         dbg("%s - product 0x%4X, num configurations %d, configuration value %d",
 413             __FUNCTION__, le16_to_cpu(dev->descriptor.idProduct),
 414             dev->descriptor.bNumConfigurations,
 415             dev->actconfig->desc.bConfigurationValue);
 416
 417         /* create device structure */
 418         tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
 419         if (tdev == NULL) {
 420                 dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
 421                 return -ENOMEM;
 422         }
 423         sema_init(&tdev->td_open_close_sem, 1);
 424         tdev->td_serial = serial;
 425         usb_set_serial_data(serial, tdev);
 426
 427         /* determine device type */
 428         if (usb_match_id(serial->interface, ti_id_table_3410))
 429                 tdev->td_is_3410 = 1;
 430         dbg("%s - device type is %s", __FUNCTION__, tdev->td_is_3410 ? "3410" : "5052");
 431
 432         /* if we have only 1 configuration, download firmware */
 433         if (dev->descriptor.bNumConfigurations == 1) {
 434
 435                 if (tdev->td_is_3410)
 436                         status = ti_download_firmware(tdev, ti_fw_3410,
 437                                 sizeof(ti_fw_3410));
 438                 else
 439                         status = ti_download_firmware(tdev, ti_fw_5052,
 440                                 sizeof(ti_fw_5052));
 441                 if (status)
 442                         goto free_tdev;
 443
 444                 /* 3410 must be reset, 5052 resets itself */
 445                 if (tdev->td_is_3410) {
 446                         msleep_interruptible(100);
 447                         usb_reset_device(dev);
 448                 }
 449
 450                 status = -ENODEV;
 451                 goto free_tdev;
 452         }
 453
 454         /* the second configuration must be set (in sysfs by hotplug script) */
 455         if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
 456                 status = -ENODEV;
 457                 goto free_tdev;
 458         }
 459
 460         /* set up port structures */
 461         for (i = 0; i < serial->num_ports; ++i) {
 462                 tport = kmalloc(sizeof(struct ti_port), GFP_KERNEL);
 463                 if (tport == NULL) {
 464                         dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
 465                         status = -ENOMEM;
 466                         goto free_tports;
 467                 }
 468                 memset(tport, 0, sizeof(struct ti_port));
 469                 spin_lock_init(&tport->tp_lock);
 470                 tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
 471                 tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
 472                 tport->tp_closing_wait = closing_wait;
 473                 init_waitqueue_head(&tport->tp_msr_wait);
 474                 init_waitqueue_head(&tport->tp_write_wait);
 475                 tport->tp_write_buf = ti_buf_alloc();
 476                 if (tport->tp_write_buf == NULL) {
 477                         dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
 478                         kfree(tport);
 479                         status = -ENOMEM;
 480                         goto free_tports;
 481                 }
 482                 tport->tp_port = serial->port[i];
 483                 tport->tp_tdev = tdev;
 484                 usb_set_serial_port_data(serial->port[i], tport);
 485                 tport->tp_uart_mode = 0;        /* default is RS232 */
 486         }
 487
 488         return 0;
 489
 490 free_tports:
 491         for (--i; i>=0; --i) {
 492                 tport = usb_get_serial_port_data(serial->port[i]);
 493                 ti_buf_free(tport->tp_write_buf);
 494                 kfree(tport);
 495                 usb_set_serial_port_data(serial->port[i], NULL);
 496         }
 497 free_tdev:
 498         kfree(tdev);
 499         usb_set_serial_data(serial, NULL);
 500         return status;
 501 }
 502
 503
 504 static void ti_shutdown(struct usb_serial *serial)
 505 {
 506         int i;
 507         struct ti_device *tdev = usb_get_serial_data(serial);
 508         struct ti_port *tport;
 509
 510         dbg("%s", __FUNCTION__);
 511
 512         for (i=0; i < serial->num_ports; ++i) {
 513                 tport = usb_get_serial_port_data(serial->port[i]);
 514                 if (tport) {
 515                         ti_buf_free(tport->tp_write_buf);
 516                         kfree(tport);
 517                         usb_set_serial_port_data(serial->port[i], NULL);
 518                 }
 519         }
 520
 521         kfree(tdev);
 522         usb_set_serial_data(serial, NULL);
 523 }
 524
 525
 526 static int ti_open(struct usb_serial_port *port, struct file *file)
 527 {
 528         struct ti_port *tport = usb_get_serial_port_data(port);
 529         struct ti_device *tdev;
 530         struct usb_device *dev;
 531         struct urb *urb;
 532         int port_number;
 533         int status;
 534         __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS |
 535                              TI_PIPE_TIMEOUT_ENABLE |
 536                              (TI_TRANSFER_TIMEOUT << 2));
 537
 538         dbg("%s - port %d", __FUNCTION__, port->number);
 539
 540         if (tport == NULL)
 541                 return -ENODEV;
 542
 543         dev = port->serial->dev;
 544         tdev = tport->tp_tdev;
 545
 546         /* only one open on any port on a device at a time */
 547         if (down_interruptible(&tdev->td_open_close_sem))
 548                 return -ERESTARTSYS;
 549
 550         if (port->tty)
 551                 port->tty->low_latency =
 552                         (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 553
 554         port_number = port->number - port->serial->minor;
 555
 556         memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
 557
 558         tport->tp_msr = 0;
 559         tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
 560
 561         /* start interrupt urb the first time a port is opened on this device */
 562         if (tdev->td_open_port_count == 0) {
 563                 dbg("%s - start interrupt in urb", __FUNCTION__);
 564                 urb = tdev->td_serial->port[0]->interrupt_in_urb;
 565                 if (!urb) {
 566                         dev_err(&port->dev, "%s - no interrupt urb\n", __FUNCTION__);
 567                         status = -EINVAL;
 568                         goto up_sem;
 569                 }
 570                 urb->complete = ti_interrupt_callback;
 571                 urb->context = tdev;
 572                 urb->dev = dev;
 573                 status = usb_submit_urb(urb, GFP_KERNEL);
 574                 if (status) {
 575                         dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __FUNCTION__, status);
 576                         goto up_sem;
 577                 }
 578         }
 579
 580         ti_set_termios(port, NULL);
 581
 582         dbg("%s - sending TI_OPEN_PORT", __FUNCTION__);
 583         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 584                 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 585         if (status) {
 586                 dev_err(&port->dev, "%s - cannot send open command, %d\n", __FUNCTION__, status);
 587                 goto unlink_int_urb;
 588         }
 589
 590         dbg("%s - sending TI_START_PORT", __FUNCTION__);
 591         status = ti_command_out_sync(tdev, TI_START_PORT,
 592                 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 593         if (status) {
 594                 dev_err(&port->dev, "%s - cannot send start command, %d\n", __FUNCTION__, status);
 595                 goto unlink_int_urb;
 596         }
 597
 598         dbg("%s - sending TI_PURGE_PORT", __FUNCTION__);
 599         status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 600                 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
 601         if (status) {
 602                 dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __FUNCTION__, status);
 603                 goto unlink_int_urb;
 604         }
 605         status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 606                 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
 607         if (status) {
 608                 dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __FUNCTION__, status);
 609                 goto unlink_int_urb;
 610         }
 611
 612         /* reset the data toggle on the bulk endpoints to work around bug in
 613          * host controllers where things get out of sync some times */
 614         usb_clear_halt(dev, port->write_urb->pipe);
 615         usb_clear_halt(dev, port->read_urb->pipe);
 616
 617         ti_set_termios(port, NULL);
 618
 619         dbg("%s - sending TI_OPEN_PORT (2)", __FUNCTION__);
 620         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 621                 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 622         if (status) {
 623                 dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __FUNCTION__, status);
 624                 goto unlink_int_urb;
 625         }
 626
 627         dbg("%s - sending TI_START_PORT (2)", __FUNCTION__);
 628         status = ti_command_out_sync(tdev, TI_START_PORT,
 629                 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 630         if (status) {
 631                 dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __FUNCTION__, status);
 632                 goto unlink_int_urb;
 633         }
 634
 635         /* start read urb */
 636         dbg("%s - start read urb", __FUNCTION__);
 637         urb = port->read_urb;
 638         if (!urb) {
 639                 dev_err(&port->dev, "%s - no read urb\n", __FUNCTION__);
 640                 status = -EINVAL;
 641                 goto unlink_int_urb;
 642         }
 643         tport->tp_read_urb_state = TI_READ_URB_RUNNING;
 644         urb->complete = ti_bulk_in_callback;
 645         urb->context = tport;
 646         urb->dev = dev;
 647         status = usb_submit_urb(urb, GFP_KERNEL);
 648         if (status) {
 649                 dev_err(&port->dev, "%s - submit read urb failed, %d\n", __FUNCTION__, status);
 650                 goto unlink_int_urb;
 651         }
 652
 653         tport->tp_is_open = 1;
 654         ++tdev->td_open_port_count;
 655
 656         goto up_sem;
 657
 658 unlink_int_urb:
 659         if (tdev->td_open_port_count == 0)
 660                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
 661 up_sem:
 662         up(&tdev->td_open_close_sem);
 663         dbg("%s - exit %d", __FUNCTION__, status);
 664         return status;
 665 }
 666
 667
 668 static void ti_close(struct usb_serial_port *port, struct file *file)
 669 {
 670         struct ti_device *tdev;
 671         struct ti_port *tport;
 672         int port_number;
 673         int status;
 674         int do_up;
 675
 676         dbg("%s - port %d", __FUNCTION__, port->number);
 677
 678         tdev = usb_get_serial_data(port->serial);
 679         tport = usb_get_serial_port_data(port);
 680         if (tdev == NULL || tport == NULL)
 681                 return;
 682
 683         tport->tp_is_open = 0;
 684
 685         ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1);
 686
 687         usb_kill_urb(port->read_urb);
 688         usb_kill_urb(port->write_urb);
 689         tport->tp_write_urb_in_use = 0;
 690
 691         port_number = port->number - port->serial->minor;
 692
 693         dbg("%s - sending TI_CLOSE_PORT", __FUNCTION__);
 694         status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
 695                      (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 696         if (status)
 697                 dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __FUNCTION__, status);
 698
 699         /* if down is interrupted, continue anyway */
 700         do_up = !down_interruptible(&tdev->td_open_close_sem);
 701         --tport->tp_tdev->td_open_port_count;
 702         if (tport->tp_tdev->td_open_port_count <= 0) {
 703                 /* last port is closed, shut down interrupt urb */
 704                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
 705                 tport->tp_tdev->td_open_port_count = 0;
 706         }
 707         if (do_up)
 708                 up(&tdev->td_open_close_sem);
 709
 710         dbg("%s - exit", __FUNCTION__);
 711 }
 712
 713
 714 static int ti_write(struct usb_serial_port *port, const unsigned char *data,
 715         int count)
 716 {
 717         struct ti_port *tport = usb_get_serial_port_data(port);
 718         unsigned long flags;
 719
 720         dbg("%s - port %d", __FUNCTION__, port->number);
 721
 722         if (count == 0) {
 723                 dbg("%s - write request of 0 bytes", __FUNCTION__);
 724                 return 0;
 725         }
 726
 727         if (tport == NULL || !tport->tp_is_open)
 728                 return -ENODEV;
 729
 730         spin_lock_irqsave(&tport->tp_lock, flags);
 731         count = ti_buf_put(tport->tp_write_buf, data, count);
 732         spin_unlock_irqrestore(&tport->tp_lock, flags);
 733
 734         ti_send(tport);
 735
 736         return count;
 737 }
 738
 739
 740 static int ti_write_room(struct usb_serial_port *port)
 741 {
 742         struct ti_port *tport = usb_get_serial_port_data(port);
 743         int room = 0;
 744         unsigned long flags;
 745
 746         dbg("%s - port %d", __FUNCTION__, port->number);
 747
 748         if (tport == NULL)
 749                 return -ENODEV;
 750
 751         spin_lock_irqsave(&tport->tp_lock, flags);
 752         room = ti_buf_space_avail(tport->tp_write_buf);
 753         spin_unlock_irqrestore(&tport->tp_lock, flags);
 754
 755         dbg("%s - returns %d", __FUNCTION__, room);
 756         return room;
 757 }
 758
 759
 760 static int ti_chars_in_buffer(struct usb_serial_port *port)
 761 {
 762         struct ti_port *tport = usb_get_serial_port_data(port);
 763         int chars = 0;
 764         unsigned long flags;
 765
 766         dbg("%s - port %d", __FUNCTION__, port->number);
 767
 768         if (tport == NULL)
 769                 return -ENODEV;
 770
 771         spin_lock_irqsave(&tport->tp_lock, flags);
 772         chars = ti_buf_data_avail(tport->tp_write_buf);
 773         spin_unlock_irqrestore(&tport->tp_lock, flags);
 774
 775         dbg("%s - returns %d", __FUNCTION__, chars);
 776         return chars;
 777 }
 778
 779
 780 static void ti_throttle(struct usb_serial_port *port)
 781 {
 782         struct ti_port *tport = usb_get_serial_port_data(port);
 783         struct tty_struct *tty;
 784
 785         dbg("%s - port %d", __FUNCTION__, port->number);
 786
 787         if (tport == NULL)
 788                 return;
 789
 790         tty = port->tty;
 791         if (!tty) {
 792                 dbg("%s - no tty", __FUNCTION__);
 793                 return;
 794         }
 795
 796         if (I_IXOFF(tty) || C_CRTSCTS(tty))
 797                 ti_stop_read(tport, tty);
 798
 799 }
 800
 801
 802 static void ti_unthrottle(struct usb_serial_port *port)
 803 {
 804         struct ti_port *tport = usb_get_serial_port_data(port);
 805         struct tty_struct *tty;
 806         int status;
 807
 808         dbg("%s - port %d", __FUNCTION__, port->number);
 809
 810         if (tport == NULL)
 811                 return;
 812
 813         tty = port->tty;
 814         if (!tty) {
 815                 dbg("%s - no tty", __FUNCTION__);
 816                 return;
 817         }
 818
 819         if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
 820                 status = ti_restart_read(tport, tty);
 821                 if (status)
 822                         dev_err(&port->dev, "%s - cannot restart read, %d\n", __FUNCTION__, status);
 823         }
 824 }
 825
 826
 827 static int ti_ioctl(struct usb_serial_port *port, struct file *file,
 828         unsigned int cmd, unsigned long arg)
 829 {
 830         struct ti_port *tport = usb_get_serial_port_data(port);
 831         struct async_icount cnow;
 832         struct async_icount cprev;
 833
 834         dbg("%s - port %d, cmd = 0x%04X", __FUNCTION__, port->number, cmd);
 835
 836         if (tport == NULL)
 837                 return -ENODEV;
 838
 839         switch (cmd) {
 840                 case TIOCGSERIAL:
 841                         dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number);
 842                         return ti_get_serial_info(tport, (struct serial_struct __user *)arg);
 843                         break;
 844
 845                 case TIOCSSERIAL:
 846                         dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number);
 847                         return ti_set_serial_info(tport, (struct serial_struct __user *)arg);
 848                         break;
 849
 850                 case TIOCMIWAIT:
 851                         dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number);
 852                         cprev = tport->tp_icount;
 853                         while (1) {
 854                                 interruptible_sleep_on(&tport->tp_msr_wait);
 855                                 if (signal_pending(current))
 856                                         return -ERESTARTSYS;
 857                                 cnow = tport->tp_icount;
 858                                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
 859                                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
 860                                         return -EIO; /* no change => error */
 861                                 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
 862                                     ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
 863                                     ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
 864                                     ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
 865                                         return 0;
 866                                 }
 867                                 cprev = cnow;
 868                         }
 869                         break;
 870
 871                 case TIOCGICOUNT:
 872                         dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, tport->tp_icount.rx, tport->tp_icount.tx);
 873                         if (copy_to_user((void __user *)arg, &tport->tp_icount, sizeof(tport->tp_icount)))
 874                                 return -EFAULT;
 875                         return 0;
 876         }
 877
 878         return -ENOIOCTLCMD;
 879 }
 880
 881
 882 static void ti_set_termios(struct usb_serial_port *port,
 883         struct termios *old_termios)
 884 {
 885         struct ti_port *tport = usb_get_serial_port_data(port);
 886         struct tty_struct *tty = port->tty;
 887         struct ti_uart_config *config;
 888         tcflag_t cflag,iflag;
 889         int baud;
 890         int status;
 891         int port_number = port->number - port->serial->minor;
 892         unsigned int mcr;
 893
 894         dbg("%s - port %d", __FUNCTION__, port->number);
 895
 896         if (!tty || !tty->termios) {
 897                 dbg("%s - no tty or termios", __FUNCTION__);
 898                 return;
 899         }
 900
 901         cflag = tty->termios->c_cflag;
 902         iflag = tty->termios->c_iflag;
 903
 904         if (old_termios && cflag == old_termios->c_cflag
 905         && iflag == old_termios->c_iflag) {
 906                 dbg("%s - nothing to change", __FUNCTION__);
 907                 return;
 908         }
 909
 910         dbg("%s - clfag %08x, iflag %08x", __FUNCTION__, cflag, iflag);
 911
 912         if (old_termios)
 913                 dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__, old_termios->c_cflag, old_termios->c_iflag);
 914
 915         if (tport == NULL)
 916                 return;
 917
 918         config = kmalloc(sizeof(*config), GFP_KERNEL);
 919         if (!config) {
 920                 dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__);
 921                 return;
 922         }
 923
 924         config->wFlags = 0;
 925
 926         /* these flags must be set */
 927         config->wFlags |= TI_UART_ENABLE_MS_INTS;
 928         config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA;
 929         config->bUartMode = (__u8)(tport->tp_uart_mode);
 930
 931         switch (cflag & CSIZE) {
 932                 case CS5:
 933                             config->bDataBits = TI_UART_5_DATA_BITS;
 934                             break;
 935                 case CS6:
 936                             config->bDataBits = TI_UART_6_DATA_BITS;
 937                             break;
 938                 case CS7:
 939                             config->bDataBits = TI_UART_7_DATA_BITS;
 940                             break;
 941                 default:
 942                 case CS8:
 943                             config->bDataBits = TI_UART_8_DATA_BITS;
 944                             break;
 945         }
 946
 947         if (cflag & PARENB) {
 948                 if (cflag & PARODD) {
 949                         config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
 950                         config->bParity = TI_UART_ODD_PARITY;
 951                 } else {
 952                         config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
 953                         config->bParity = TI_UART_EVEN_PARITY;
 954                 }
 955         } else {
 956                 config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING;
 957                 config->bParity = TI_UART_NO_PARITY;
 958         }
 959
 960         if (cflag & CSTOPB)
 961                 config->bStopBits = TI_UART_2_STOP_BITS;
 962         else
 963                 config->bStopBits = TI_UART_1_STOP_BITS;
 964
 965         if (cflag & CRTSCTS) {
 966                 /* RTS flow control must be off to drop RTS for baud rate B0 */
 967                 if ((cflag & CBAUD) != B0)
 968                         config->wFlags |= TI_UART_ENABLE_RTS_IN;
 969                 config->wFlags |= TI_UART_ENABLE_CTS_OUT;
 970         } else {
 971                 tty->hw_stopped = 0;
 972                 ti_restart_read(tport, tty);
 973         }
 974
 975         if (I_IXOFF(tty) || I_IXON(tty)) {
 976                 config->cXon  = START_CHAR(tty);
 977                 config->cXoff = STOP_CHAR(tty);
 978
 979                 if (I_IXOFF(tty))
 980                         config->wFlags |= TI_UART_ENABLE_X_IN;
 981                 else
 982                         ti_restart_read(tport, tty);
 983
 984                 if (I_IXON(tty))
 985                         config->wFlags |= TI_UART_ENABLE_X_OUT;
 986         }
 987
 988         baud = tty_get_baud_rate(tty);
 989         if (!baud) baud = 9600;
 990         if (tport->tp_tdev->td_is_3410)
 991                 config->wBaudRate = (__u16)((923077 + baud/2) / baud);
 992         else
 993                 config->wBaudRate = (__u16)((461538 + baud/2) / baud);
 994
 995         dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
 996         __FUNCTION__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
 997
 998         cpu_to_be16s(&config->wBaudRate);
 999         cpu_to_be16s(&config->wFlags);
1000
1001         status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG,
1002                 (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
1003                 sizeof(*config));
1004         if (status)
1005                 dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __FUNCTION__, port_number, status);
1006
1007         /* SET_CONFIG asserts RTS and DTR, reset them correctly */
1008         mcr = tport->tp_shadow_mcr;
1009         /* if baud rate is B0, clear RTS and DTR */
1010         if ((cflag & CBAUD) == B0)
1011                 mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
1012         status = ti_set_mcr(tport, mcr);
1013         if (status)
1014                 dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __FUNCTION__, port_number, status);
1015
1016         kfree(config);
1017 }
1018
1019
1020 static int ti_tiocmget(struct usb_serial_port *port, struct file *file)
1021 {
1022         struct ti_port *tport = usb_get_serial_port_data(port);
1023         unsigned int result;
1024         unsigned int msr;
1025         unsigned int mcr;
1026
1027         dbg("%s - port %d", __FUNCTION__, port->number);
1028
1029         if (tport == NULL)
1030                 return -ENODEV;
1031
1032         msr = tport->tp_msr;
1033         mcr = tport->tp_shadow_mcr;
1034
1035         result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
1036                 | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
1037                 | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
1038                 | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
1039                 | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
1040                 | ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
1041                 | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
1042
1043         dbg("%s - 0x%04X", __FUNCTION__, result);
1044
1045         return result;
1046 }
1047
1048
1049 static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
1050         unsigned int set, unsigned int clear)
1051 {
1052         struct ti_port *tport = usb_get_serial_port_data(port);
1053         unsigned int mcr;
1054
1055         dbg("%s - port %d", __FUNCTION__, port->number);
1056
1057         if (tport == NULL)
1058                 return -ENODEV;
1059
1060         mcr = tport->tp_shadow_mcr;
1061
1062         if (set & TIOCM_RTS)
1063                 mcr |= TI_MCR_RTS;
1064         if (set & TIOCM_DTR)
1065                 mcr |= TI_MCR_DTR;
1066         if (set & TIOCM_LOOP)
1067                 mcr |= TI_MCR_LOOP;
1068
1069         if (clear & TIOCM_RTS)
1070                 mcr &= ~TI_MCR_RTS;
1071         if (clear & TIOCM_DTR)
1072                 mcr &= ~TI_MCR_DTR;
1073         if (clear & TIOCM_LOOP)
1074                 mcr &= ~TI_MCR_LOOP;
1075
1076         return ti_set_mcr(tport, mcr);
1077 }
1078
1079
1080 static void ti_break(struct usb_serial_port *port, int break_state)
1081 {
1082         struct ti_port *tport = usb_get_serial_port_data(port);
1083         int status;
1084
1085         dbg("%s - state = %d", __FUNCTION__, break_state);
1086
1087         if (tport == NULL)
1088                 return;
1089
1090         ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0);
1091
1092         status = ti_write_byte(tport->tp_tdev,
1093                 tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
1094                 TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
1095
1096         if (status)
1097                 dbg("%s - error setting break, %d", __FUNCTION__, status);
1098 }
1099
1100
1101 static void ti_interrupt_callback(struct urb *urb)
1102 {
1103         struct ti_device *tdev = (struct ti_device *)urb->context;
1104         struct usb_serial_port *port;
1105         struct usb_serial *serial = tdev->td_serial;
1106         struct ti_port *tport;
1107         struct device *dev = &urb->dev->dev;
1108         unsigned char *data = urb->transfer_buffer;
1109         int length = urb->actual_length;
1110         int port_number;
1111         int function;
1112         int status;
1113         __u8 msr;
1114
1115         dbg("%s", __FUNCTION__);
1116
1117         switch (urb->status) {
1118         case 0:
1119                 break;
1120         case -ECONNRESET:
1121         case -ENOENT:
1122         case -ESHUTDOWN:
1123                 dbg("%s - urb shutting down, %d", __FUNCTION__, urb->status);
1124                 tdev->td_urb_error = 1;
1125                 return;
1126         default:
1127                 dev_err(dev, "%s - nonzero urb status, %d\n", __FUNCTION__, urb->status);
1128                 tdev->td_urb_error = 1;
1129                 goto exit;
1130         }
1131
1132         if (length != 2) {
1133                 dbg("%s - bad packet size, %d", __FUNCTION__, length);
1134                 goto exit;
1135         }
1136
1137         if (data[0] == TI_CODE_HARDWARE_ERROR) {
1138                 dev_err(dev, "%s - hardware error, %d\n", __FUNCTION__, data[1]);
1139                 goto exit;
1140         }
1141
1142         port_number = TI_GET_PORT_FROM_CODE(data[0]);
1143         function = TI_GET_FUNC_FROM_CODE(data[0]);
1144
1145         dbg("%s - port_number %d, function %d, data 0x%02X", __FUNCTION__, port_number, function, data[1]);
1146
1147         if (port_number >= serial->num_ports) {
1148                 dev_err(dev, "%s - bad port number, %d\n", __FUNCTION__, port_number);
1149                 goto exit;
1150         }
1151
1152         port = serial->port[port_number];
1153
1154         tport = usb_get_serial_port_data(port);
1155         if (!tport)
1156                 goto exit;
1157
1158         switch (function) {
1159         case TI_CODE_DATA_ERROR:
1160                 dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __FUNCTION__, port_number, data[1]);
1161                 break;
1162
1163         case TI_CODE_MODEM_STATUS:
1164                 msr = data[1];
1165                 dbg("%s - port %d, msr 0x%02X", __FUNCTION__, port_number, msr);
1166                 ti_handle_new_msr(tport, msr);
1167                 break;
1168
1169         default:
1170                 dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __FUNCTION__, data[1]);
1171                 break;
1172         }
1173
1174 exit:
1175         status = usb_submit_urb(urb, GFP_ATOMIC);
1176         if (status)
1177                 dev_err(dev, "%s - resubmit interrupt urb failed, %d\n", __FUNCTION__, status);
1178 }
1179
1180
1181 static void ti_bulk_in_callback(struct urb *urb)
1182 {
1183         struct ti_port *tport = (struct ti_port *)urb->context;
1184         struct usb_serial_port *port = tport->tp_port;
1185         struct device *dev = &urb->dev->dev;
1186         int status = 0;
1187
1188         dbg("%s", __FUNCTION__);
1189
1190         switch (urb->status) {
1191         case 0:
1192                 break;
1193         case -ECONNRESET:
1194         case -ENOENT:
1195         case -ESHUTDOWN:
1196                 dbg("%s - urb shutting down, %d", __FUNCTION__, urb->status);
1197                 tport->tp_tdev->td_urb_error = 1;
1198                 wake_up_interruptible(&tport->tp_write_wait);
1199                 return;
1200         default:
1201                 dev_err(dev, "%s - nonzero urb status, %d\n", __FUNCTION__, urb->status );
1202                 tport->tp_tdev->td_urb_error = 1;
1203                 wake_up_interruptible(&tport->tp_write_wait);
1204         }
1205
1206         if (urb->status == -EPIPE)
1207                 goto exit;
1208
1209         if (urb->status) {
1210                 dev_err(dev, "%s - stopping read!\n", __FUNCTION__);
1211                 return;
1212         }
1213
1214         if (port->tty && urb->actual_length) {
1215                 usb_serial_debug_data(debug, dev, __FUNCTION__,
1216                         urb->actual_length, urb->transfer_buffer);
1217
1218                 if (!tport->tp_is_open)
1219                         dbg("%s - port closed, dropping data", __FUNCTION__);
1220                 else
1221                         ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer,
1222                                 urb->actual_length);
1223
1224                 spin_lock(&tport->tp_lock);
1225                 tport->tp_icount.rx += urb->actual_length;
1226                 spin_unlock(&tport->tp_lock);
1227         }
1228
1229 exit:
1230         /* continue to read unless stopping */
1231         spin_lock(&tport->tp_lock);
1232         if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) {
1233                 urb->dev = port->serial->dev;
1234                 status = usb_submit_urb(urb, GFP_ATOMIC);
1235         } else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) {
1236                 tport->tp_read_urb_state = TI_READ_URB_STOPPED;
1237         }
1238         spin_unlock(&tport->tp_lock);
1239         if (status)
1240                 dev_err(dev, "%s - resubmit read urb failed, %d\n", __FUNCTION__, status);
1241 }
1242
1243
1244 static void ti_bulk_out_callback(struct urb *urb)
1245 {
1246         struct ti_port *tport = (struct ti_port *)urb->context;
1247         struct usb_serial_port *port = tport->tp_port;
1248         struct device *dev = &urb->dev->dev;
1249
1250         dbg("%s - port %d", __FUNCTION__, port->number);
1251
1252         tport->tp_write_urb_in_use = 0;
1253
1254         switch (urb->status) {
1255         case 0:
1256                 break;
1257         case -ECONNRESET:
1258         case -ENOENT:
1259         case -ESHUTDOWN:
1260                 dbg("%s - urb shutting down, %d", __FUNCTION__, urb->status);
1261                 tport->tp_tdev->td_urb_error = 1;
1262                 wake_up_interruptible(&tport->tp_write_wait);
1263                 return;
1264         default:
1265                 dev_err(dev, "%s - nonzero urb status, %d\n", __FUNCTION__, urb->status);
1266                 tport->tp_tdev->td_urb_error = 1;
1267                 wake_up_interruptible(&tport->tp_write_wait);
1268         }
1269
1270         /* send any buffered data */
1271         ti_send(tport);
1272 }
1273
1274
1275 static void ti_recv(struct device *dev, struct tty_struct *tty,
1276         unsigned char *data, int length)
1277 {
1278         int cnt;
1279
1280         do {
1281                 cnt = tty_buffer_request_room(tty, length);
1282                 if (cnt < length) {
1283                         dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length - cnt);
1284                         if(cnt == 0)
1285                                 break;
1286                 }
1287                 tty_insert_flip_string(tty, data, cnt);
1288                 tty_flip_buffer_push(tty);
1289                 data += cnt;
1290                 length -= cnt;
1291         } while (length > 0);
1292
1293 }
1294
1295
1296 static void ti_send(struct ti_port *tport)
1297 {
1298         int count, result;
1299         struct usb_serial_port *port = tport->tp_port;
1300         struct tty_struct *tty = port->tty;
1301         unsigned long flags;
1302
1303
1304         dbg("%s - port %d", __FUNCTION__, port->number);
1305
1306         spin_lock_irqsave(&tport->tp_lock, flags);
1307
1308         if (tport->tp_write_urb_in_use) {
1309                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1310                 return;
1311         }
1312
1313         count = ti_buf_get(tport->tp_write_buf,
1314                                 port->write_urb->transfer_buffer,
1315                                 port->bulk_out_size);
1316
1317         if (count == 0) {
1318                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1319                 return;
1320         }
1321
1322         tport->tp_write_urb_in_use = 1;
1323
1324         spin_unlock_irqrestore(&tport->tp_lock, flags);
1325
1326         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
1327
1328         usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1329                            usb_sndbulkpipe(port->serial->dev,
1330                                             port->bulk_out_endpointAddress),
1331                            port->write_urb->transfer_buffer, count,
1332                            ti_bulk_out_callback, tport);
1333
1334         result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1335         if (result) {
1336                 dev_err(&port->dev, "%s - submit write urb failed, %d\n", __FUNCTION__, result);
1337                 tport->tp_write_urb_in_use = 0;
1338                 /* TODO: reschedule ti_send */
1339         } else {
1340                 spin_lock_irqsave(&tport->tp_lock, flags);
1341                 tport->tp_icount.tx += count;
1342                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1343         }
1344
1345         /* more room in the buffer for new writes, wakeup */
1346         if (tty)
1347                 tty_wakeup(tty);
1348         wake_up_interruptible(&tport->tp_write_wait);
1349 }
1350
1351
1352 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
1353 {
1354         int status;
1355
1356         status = ti_write_byte(tport->tp_tdev,
1357                 tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
1358                 TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
1359
1360         if (!status)
1361                 tport->tp_shadow_mcr = mcr;
1362
1363         return status;
1364 }
1365
1366
1367 static int ti_get_lsr(struct ti_port *tport)
1368 {
1369         int size,status;
1370         struct ti_device *tdev = tport->tp_tdev;
1371         struct usb_serial_port *port = tport->tp_port;
1372         int port_number = port->number - port->serial->minor;
1373         struct ti_port_status *data;
1374
1375         dbg("%s - port %d", __FUNCTION__, port->number);
1376
1377         size = sizeof(struct ti_port_status);
1378         data = kmalloc(size, GFP_KERNEL);
1379         if (!data) {
1380                 dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__);
1381                 return -ENOMEM;
1382         }
1383
1384         status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
1385                 (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
1386         if (status) {
1387                 dev_err(&port->dev, "%s - get port status command failed, %d\n", __FUNCTION__, status);
1388                 goto free_data;
1389         }
1390
1391         dbg("%s - lsr 0x%02X", __FUNCTION__, data->bLSR);
1392
1393         tport->tp_lsr = data->bLSR;
1394
1395 free_data:
1396         kfree(data);
1397         return status;
1398 }
1399
1400
1401 static int ti_get_serial_info(struct ti_port *tport,
1402         struct serial_struct __user *ret_arg)
1403 {
1404         struct usb_serial_port *port = tport->tp_port;
1405         struct serial_struct ret_serial;
1406
1407         if (!ret_arg)
1408                 return -EFAULT;
1409
1410         memset(&ret_serial, 0, sizeof(ret_serial));
1411
1412         ret_serial.type = PORT_16550A;
1413         ret_serial.line = port->serial->minor;
1414         ret_serial.port = port->number - port->serial->minor;
1415         ret_serial.flags = tport->tp_flags;
1416         ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE;
1417         ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
1418         ret_serial.closing_wait = tport->tp_closing_wait;
1419
1420         if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
1421                 return -EFAULT;
1422
1423         return 0;
1424 }
1425
1426
1427 static int ti_set_serial_info(struct ti_port *tport,
1428         struct serial_struct __user *new_arg)
1429 {
1430         struct usb_serial_port *port = tport->tp_port;
1431         struct serial_struct new_serial;
1432
1433         if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
1434                 return -EFAULT;
1435
1436         tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
1437         if (port->tty)
1438                 port->tty->low_latency =
1439                         (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
1440         tport->tp_closing_wait = new_serial.closing_wait;
1441
1442         return 0;
1443 }
1444
1445
1446 static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
1447 {
1448         struct async_icount *icount;
1449         struct tty_struct *tty;
1450         unsigned long flags;
1451
1452         dbg("%s - msr 0x%02X", __FUNCTION__, msr);
1453
1454         if (msr & TI_MSR_DELTA_MASK) {
1455                 spin_lock_irqsave(&tport->tp_lock, flags);
1456                 icount = &tport->tp_icount;
1457                 if (msr & TI_MSR_DELTA_CTS)
1458                         icount->cts++;
1459                 if (msr & TI_MSR_DELTA_DSR)
1460                         icount->dsr++;
1461                 if (msr & TI_MSR_DELTA_CD)
1462                         icount->dcd++;
1463                 if (msr & TI_MSR_DELTA_RI)
1464                         icount->rng++;
1465                 wake_up_interruptible(&tport->tp_msr_wait);
1466                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1467         }
1468
1469         tport->tp_msr = msr & TI_MSR_MASK;
1470
1471         /* handle CTS flow control */
1472         tty = tport->tp_port->tty;
1473         if (tty && C_CRTSCTS(tty)) {
1474                 if (msr & TI_MSR_CTS) {
1475                         tty->hw_stopped = 0;
1476                         tty_wakeup(tty);
1477                 } else {
1478                         tty->hw_stopped = 1;
1479                 }
1480         }
1481 }
1482
1483
1484 static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
1485 {
1486         struct ti_device *tdev = tport->tp_tdev;
1487         struct usb_serial_port *port = tport->tp_port;
1488         wait_queue_t wait;
1489         unsigned long flags;
1490
1491         dbg("%s - port %d", __FUNCTION__, port->number);
1492
1493         spin_lock_irqsave(&tport->tp_lock, flags);
1494
1495         /* wait for data to drain from the buffer */
1496         tdev->td_urb_error = 0;
1497         init_waitqueue_entry(&wait, current);
1498         add_wait_queue(&tport->tp_write_wait, &wait);
1499         for (;;) {
1500                 set_current_state(TASK_INTERRUPTIBLE);
1501                 if (ti_buf_data_avail(tport->tp_write_buf) == 0
1502                 || timeout == 0 || signal_pending(current)
1503                 || tdev->td_urb_error
1504                 || !usb_get_intfdata(port->serial->interface))  /* disconnect */
1505                         break;
1506                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1507                 timeout = schedule_timeout(timeout);
1508                 spin_lock_irqsave(&tport->tp_lock, flags);
1509         }
1510         set_current_state(TASK_RUNNING);
1511         remove_wait_queue(&tport->tp_write_wait, &wait);
1512
1513         /* flush any remaining data in the buffer */
1514         if (flush)
1515                 ti_buf_clear(tport->tp_write_buf);
1516
1517         spin_unlock_irqrestore(&tport->tp_lock, flags);
1518
1519         /* wait for data to drain from the device */
1520         /* wait for empty tx register, plus 20 ms */
1521         timeout += jiffies;
1522         tport->tp_lsr &= ~TI_LSR_TX_EMPTY;
1523         while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
1524         && !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error
1525         && usb_get_intfdata(port->serial->interface)) {  /* not disconnected */
1526                 if (ti_get_lsr(tport))
1527                         break;
1528                 msleep_interruptible(20);
1529         }
1530 }
1531
1532
1533 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
1534 {
1535         unsigned long flags;
1536
1537         spin_lock_irqsave(&tport->tp_lock, flags);
1538
1539         if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1540                 tport->tp_read_urb_state = TI_READ_URB_STOPPING;
1541
1542         spin_unlock_irqrestore(&tport->tp_lock, flags);
1543 }
1544
1545
1546 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
1547 {
1548         struct urb *urb;
1549         int status = 0;
1550         unsigned long flags;
1551
1552         spin_lock_irqsave(&tport->tp_lock, flags);
1553
1554         if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
1555                 urb = tport->tp_port->read_urb;
1556                 urb->complete = ti_bulk_in_callback;
1557                 urb->context = tport;
1558                 urb->dev = tport->tp_port->serial->dev;
1559                 status = usb_submit_urb(urb, GFP_KERNEL);
1560         }
1561         tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1562
1563         spin_unlock_irqrestore(&tport->tp_lock, flags);
1564
1565         return status;
1566 }
1567
1568
1569 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
1570         __u16 moduleid, __u16 value, __u8 *data, int size)
1571 {
1572         int status;
1573
1574         status = usb_control_msg(tdev->td_serial->dev,
1575                 usb_sndctrlpipe(tdev->td_serial->dev, 0), command,
1576                 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
1577                 value, moduleid, data, size, 1000);
1578
1579         if (status == size)
1580                 status = 0;
1581
1582         if (status > 0)
1583                 status = -ECOMM;
1584
1585         return status;
1586 }
1587
1588
1589 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
1590         __u16 moduleid, __u16 value, __u8 *data, int size)
1591 {
1592         int status;
1593
1594         status = usb_control_msg(tdev->td_serial->dev,
1595                 usb_rcvctrlpipe(tdev->td_serial->dev, 0), command,
1596                 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
1597                 value, moduleid, data, size, 1000);
1598
1599         if (status == size)
1600                 status = 0;
1601
1602         if (status > 0)
1603                 status = -ECOMM;
1604
1605         return status;
1606 }
1607
1608
1609 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
1610         __u8 mask, __u8 byte)
1611 {
1612         int status;
1613         unsigned int size;
1614         struct ti_write_data_bytes *data;
1615         struct device *dev = &tdev->td_serial->dev->dev;
1616
1617         dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __FUNCTION__, addr, mask, byte);
1618
1619         size = sizeof(struct ti_write_data_bytes) + 2;
1620         data = kmalloc(size, GFP_KERNEL);
1621         if (!data) {
1622                 dev_err(dev, "%s - out of memory\n", __FUNCTION__);
1623                 return -ENOMEM;
1624         }
1625
1626         data->bAddrType = TI_RW_DATA_ADDR_XDATA;
1627         data->bDataType = TI_RW_DATA_BYTE;
1628         data->bDataCounter = 1;
1629         data->wBaseAddrHi = cpu_to_be16(addr>>16);
1630         data->wBaseAddrLo = cpu_to_be16(addr);
1631         data->bData[0] = mask;
1632         data->bData[1] = byte;
1633
1634         status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0,
1635                 (__u8 *)data, size);
1636
1637         if (status < 0)
1638                 dev_err(dev, "%s - failed, %d\n", __FUNCTION__, status);
1639
1640         kfree(data);
1641
1642         return status;
1643 }
1644
1645
1646 static int ti_download_firmware(struct ti_device *tdev,
1647         unsigned char *firmware, unsigned int firmware_size)
1648 {
1649         int status = 0;
1650         int buffer_size;
1651         int pos;
1652         int len;
1653         int done;
1654         __u8 cs = 0;
1655         __u8 *buffer;
1656         struct usb_device *dev = tdev->td_serial->dev;
1657         struct ti_firmware_header *header;
1658         unsigned int pipe = usb_sndbulkpipe(dev,
1659                 tdev->td_serial->port[0]->bulk_out_endpointAddress);
1660
1661
1662         buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
1663         buffer = kmalloc(buffer_size, GFP_KERNEL);
1664         if (!buffer) {
1665                 dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
1666                 return -ENOMEM;
1667         }
1668
1669         memcpy(buffer, firmware, firmware_size);
1670         memset(buffer+firmware_size, 0xff, buffer_size-firmware_size);
1671
1672         for(pos = sizeof(struct ti_firmware_header); pos < buffer_size; pos++)
1673                 cs = (__u8)(cs + buffer[pos]);
1674
1675         header = (struct ti_firmware_header *)buffer;
1676         header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header)));
1677         header->bCheckSum = cs;
1678
1679         dbg("%s - downloading firmware", __FUNCTION__);
1680         for (pos = 0; pos < buffer_size; pos += done) {
1681                 len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
1682                 status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000);
1683                 if (status)
1684                         break;
1685         }
1686
1687         kfree(buffer);
1688
1689         if (status) {
1690                 dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __FUNCTION__, status);
1691                 return status;
1692         }
1693
1694         dbg("%s - download successful", __FUNCTION__);
1695
1696         return 0;
1697 }
1698
1699
1700 /* Circular Buffer Functions */
1701
1702 /*
1703  * ti_buf_alloc
1704  *
1705  * Allocate a circular buffer and all associated memory.
1706  */
1707
1708 static struct circ_buf *ti_buf_alloc(void)
1709 {
1710         struct circ_buf *cb;
1711
1712         cb = (struct circ_buf *)kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
1713         if (cb == NULL)
1714                 return NULL;
1715
1716         cb->buf = kmalloc(TI_WRITE_BUF_SIZE, GFP_KERNEL);
1717         if (cb->buf == NULL) {
1718                 kfree(cb);
1719                 return NULL;
1720         }
1721
1722         ti_buf_clear(cb);
1723
1724         return cb;
1725 }
1726
1727
1728 /*
1729  * ti_buf_free
1730  *
1731  * Free the buffer and all associated memory.
1732  */
1733
1734 static void ti_buf_free(struct circ_buf *cb)
1735 {
1736         kfree(cb->buf);
1737         kfree(cb);
1738 }
1739
1740
1741 /*
1742  * ti_buf_clear
1743  *
1744  * Clear out all data in the circular buffer.
1745  */
1746
1747 static void ti_buf_clear(struct circ_buf *cb)
1748 {
1749         cb->head = cb->tail = 0;
1750 }
1751
1752
1753 /*
1754  * ti_buf_data_avail
1755  *
1756  * Return the number of bytes of data available in the circular
1757  * buffer.
1758  */
1759
1760 static int ti_buf_data_avail(struct circ_buf *cb)
1761 {
1762         return CIRC_CNT(cb->head,cb->tail,TI_WRITE_BUF_SIZE);
1763 }
1764
1765
1766 /*
1767  * ti_buf_space_avail
1768  *
1769  * Return the number of bytes of space available in the circular
1770  * buffer.
1771  */
1772
1773 static int ti_buf_space_avail(struct circ_buf *cb)
1774 {
1775         return CIRC_SPACE(cb->head,cb->tail,TI_WRITE_BUF_SIZE);
1776 }
1777
1778
1779 /*
1780  * ti_buf_put
1781  *
1782  * Copy data data from a user buffer and put it into the circular buffer.
1783  * Restrict to the amount of space available.
1784  *
1785  * Return the number of bytes copied.
1786  */
1787
1788 static int ti_buf_put(struct circ_buf *cb, const char *buf, int count)
1789 {
1790         int c, ret = 0;
1791
1792         while (1) {
1793                 c = CIRC_SPACE_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
1794                 if (count < c)
1795                         c = count;
1796                 if (c <= 0)
1797                         break;
1798                 memcpy(cb->buf + cb->head, buf, c);
1799                 cb->head = (cb->head + c) & (TI_WRITE_BUF_SIZE-1);
1800                 buf += c;
1801                 count -= c;
1802                 ret += c;
1803         }
1804
1805         return ret;
1806 }
1807
1808
1809 /*
1810  * ti_buf_get
1811  *
1812  * Get data from the circular buffer and copy to the given buffer.
1813  * Restrict to the amount of data available.
1814  *
1815  * Return the number of bytes copied.
1816  */
1817
1818 static int ti_buf_get(struct circ_buf *cb, char *buf, int count)
1819 {
1820         int c, ret = 0;
1821
1822         while (1) {
1823                 c = CIRC_CNT_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
1824                 if (count < c)
1825                         c = count;
1826                 if (c <= 0)
1827                         break;
1828                 memcpy(buf, cb->buf + cb->tail, c);
1829                 cb->tail = (cb->tail + c) & (TI_WRITE_BUF_SIZE-1);
1830                 buf += c;
1831                 count -= c;
1832                 ret += c;
1833         }
1834
1835         return ret;
1836 }