git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/io_edgeport.c

   1 /*
   2  * Edgeport USB Serial Converter driver
   3  *
   4  * Copyright (C) 2000 Inside Out Networks, All rights reserved.
   5  * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
   6  *
   7  *      This program is free software; you can redistribute it and/or modify
   8  *      it under the terms of the GNU General Public License as published by
   9  *      the Free Software Foundation; either version 2 of the License, or
  10  *      (at your option) any later version.
  11  *
  12  * Supports the following devices:
  13  *      Edgeport/4
  14  *      Edgeport/4t
  15  *      Edgeport/2
  16  *      Edgeport/4i
  17  *      Edgeport/2i
  18  *      Edgeport/421
  19  *      Edgeport/21
  20  *      Rapidport/4
  21  *      Edgeport/8
  22  *      Edgeport/2D8
  23  *      Edgeport/4D8
  24  *      Edgeport/8i
  25  *
  26  * For questions or problems with this driver, contact Inside Out
  27  * Networks technical support, or Peter Berger <pberger@brimson.com>,
  28  * or Al Borchers <alborchers@steinerpoint.com>.
  29  *
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/jiffies.h>
  34 #include <linux/errno.h>
  35 #include <linux/init.h>
  36 #include <linux/slab.h>
  37 #include <linux/tty.h>
  38 #include <linux/tty_driver.h>
  39 #include <linux/tty_flip.h>
  40 #include <linux/module.h>
  41 #include <linux/spinlock.h>
  42 #include <linux/serial.h>
  43 #include <linux/ioctl.h>
  44 #include <linux/wait.h>
  45 #include <linux/firmware.h>
  46 #include <linux/ihex.h>
  47 #include <linux/uaccess.h>
  48 #include <linux/usb.h>
  49 #include <linux/usb/serial.h>
  50 #include "io_edgeport.h"
  51 #include "io_ionsp.h"           /* info for the iosp messages */
  52 #include "io_16654.h"           /* 16654 UART defines */
  53
  54 /*
  55  * Version Information
  56  */
  57 #define DRIVER_VERSION "v2.7"
  58 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
  59 #define DRIVER_DESC "Edgeport USB Serial Driver"
  60
  61 #define MAX_NAME_LEN            64
  62
  63 #define CHASE_TIMEOUT           (5*HZ)          /* 5 seconds */
  64 #define OPEN_TIMEOUT            (5*HZ)          /* 5 seconds */
  65 #define COMMAND_TIMEOUT         (5*HZ)          /* 5 seconds */
  66
  67 /* receive port state */
  68 enum RXSTATE {
  69         EXPECT_HDR1 = 0,    /* Expect header byte 1 */
  70         EXPECT_HDR2 = 1,    /* Expect header byte 2 */
  71         EXPECT_DATA = 2,    /* Expect 'RxBytesRemaining' data */
  72         EXPECT_HDR3 = 3,    /* Expect header byte 3 (for status hdrs only) */
  73 };
  74
  75
  76 /* Transmit Fifo
  77  * This Transmit queue is an extension of the edgeport Rx buffer.
  78  * The maximum amount of data buffered in both the edgeport
  79  * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits.
  80  */
  81 struct TxFifo {
  82         unsigned int    head;   /* index to head pointer (write) */
  83         unsigned int    tail;   /* index to tail pointer (read)  */
  84         unsigned int    count;  /* Bytes in queue */
  85         unsigned int    size;   /* Max size of queue (equal to Max number of TxCredits) */
  86         unsigned char   *fifo;  /* allocated Buffer */
  87 };
  88
  89 /* This structure holds all of the local port information */
  90 struct edgeport_port {
  91         __u16                   txCredits;              /* our current credits for this port */
  92         __u16                   maxTxCredits;           /* the max size of the port */
  93
  94         struct TxFifo           txfifo;                 /* transmit fifo -- size will be maxTxCredits */
  95         struct urb              *write_urb;             /* write URB for this port */
  96         bool                    write_in_progress;      /* 'true' while a write URB is outstanding */
  97         spinlock_t              ep_lock;
  98
  99         __u8                    shadowLCR;              /* last LCR value received */
 100         __u8                    shadowMCR;              /* last MCR value received */
 101         __u8                    shadowMSR;              /* last MSR value received */
 102         __u8                    shadowLSR;              /* last LSR value received */
 103         __u8                    shadowXonChar;          /* last value set as XON char in Edgeport */
 104         __u8                    shadowXoffChar;         /* last value set as XOFF char in Edgeport */
 105         __u8                    validDataMask;
 106         __u32                   baudRate;
 107
 108         bool                    open;
 109         bool                    openPending;
 110         bool                    commandPending;
 111         bool                    closePending;
 112         bool                    chaseResponsePending;
 113
 114         wait_queue_head_t       wait_chase;             /* for handling sleeping while waiting for chase to finish */
 115         wait_queue_head_t       wait_open;              /* for handling sleeping while waiting for open to finish */
 116         wait_queue_head_t       wait_command;           /* for handling sleeping while waiting for command to finish */
 117         wait_queue_head_t       delta_msr_wait;         /* for handling sleeping while waiting for msr change to happen */
 118
 119         struct async_icount     icount;
 120         struct usb_serial_port  *port;                  /* loop back to the owner of this object */
 121 };
 122
 123
 124 /* This structure holds all of the individual device information */
 125 struct edgeport_serial {
 126         char                    name[MAX_NAME_LEN+2];           /* string name of this device */
 127
 128         struct edge_manuf_descriptor    manuf_descriptor;       /* the manufacturer descriptor */
 129         struct edge_boot_descriptor     boot_descriptor;        /* the boot firmware descriptor */
 130         struct edgeport_product_info    product_info;           /* Product Info */
 131         struct edge_compatibility_descriptor epic_descriptor;   /* Edgeport compatible descriptor */
 132         int                     is_epic;                        /* flag if EPiC device or not */
 133
 134         __u8                    interrupt_in_endpoint;          /* the interrupt endpoint handle */
 135         unsigned char           *interrupt_in_buffer;           /* the buffer we use for the interrupt endpoint */
 136         struct urb              *interrupt_read_urb;            /* our interrupt urb */
 137
 138         __u8                    bulk_in_endpoint;               /* the bulk in endpoint handle */
 139         unsigned char           *bulk_in_buffer;                /* the buffer we use for the bulk in endpoint */
 140         struct urb              *read_urb;                      /* our bulk read urb */
 141         bool                    read_in_progress;
 142         spinlock_t              es_lock;
 143
 144         __u8                    bulk_out_endpoint;              /* the bulk out endpoint handle */
 145
 146         __s16                   rxBytesAvail;                   /* the number of bytes that we need to read from this device */
 147
 148         enum RXSTATE            rxState;                        /* the current state of the bulk receive processor */
 149         __u8                    rxHeader1;                      /* receive header byte 1 */
 150         __u8                    rxHeader2;                      /* receive header byte 2 */
 151         __u8                    rxHeader3;                      /* receive header byte 3 */
 152         __u8                    rxPort;                         /* the port that we are currently receiving data for */
 153         __u8                    rxStatusCode;                   /* the receive status code */
 154         __u8                    rxStatusParam;                  /* the receive status paramater */
 155         __s16                   rxBytesRemaining;               /* the number of port bytes left to read */
 156         struct usb_serial       *serial;                        /* loop back to the owner of this object */
 157 };
 158
 159 /* baud rate information */
 160 struct divisor_table_entry {
 161         __u32   BaudRate;
 162         __u16  Divisor;
 163 };
 164
 165 /*
 166  * Define table of divisors for Rev A EdgePort/4 hardware
 167  * These assume a 3.6864MHz crystal, the standard /16, and
 168  * MCR.7 = 0.
 169  */
 170
 171 static const struct divisor_table_entry divisor_table[] = {
 172         {   50,         4608},
 173         {   75,         3072},
 174         {   110,        2095},  /* 2094.545455 => 230450   => .0217 % over */
 175         {   134,        1713},  /* 1713.011152 => 230398.5 => .00065% under */
 176         {   150,        1536},
 177         {   300,        768},
 178         {   600,        384},
 179         {   1200,       192},
 180         {   1800,       128},
 181         {   2400,       96},
 182         {   4800,       48},
 183         {   7200,       32},
 184         {   9600,       24},
 185         {   14400,      16},
 186         {   19200,      12},
 187         {   38400,      6},
 188         {   57600,      4},
 189         {   115200,     2},
 190         {   230400,     1},
 191 };
 192
 193 /* local variables */
 194 static int debug;
 195
 196 static int low_latency = 1;     /* tty low latency flag, on by default */
 197
 198 static atomic_t CmdUrbs;        /* Number of outstanding Command Write Urbs */
 199
 200
 201 /* local function prototypes */
 202
 203 /* function prototypes for all URB callbacks */
 204 static void edge_interrupt_callback(struct urb *urb);
 205 static void edge_bulk_in_callback(struct urb *urb);
 206 static void edge_bulk_out_data_callback(struct urb *urb);
 207 static void edge_bulk_out_cmd_callback(struct urb *urb);
 208
 209 /* function prototypes for the usbserial callbacks */
 210 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
 211                                         struct file *filp);
 212 static void edge_close(struct tty_struct *tty, struct usb_serial_port *port,
 213                                         struct file *filp);
 214 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 215                                         const unsigned char *buf, int count);
 216 static int edge_write_room(struct tty_struct *tty);
 217 static int edge_chars_in_buffer(struct tty_struct *tty);
 218 static void edge_throttle(struct tty_struct *tty);
 219 static void edge_unthrottle(struct tty_struct *tty);
 220 static void edge_set_termios(struct tty_struct *tty,
 221                                         struct usb_serial_port *port,
 222                                         struct ktermios *old_termios);
 223 static int  edge_ioctl(struct tty_struct *tty, struct file *file,
 224                                         unsigned int cmd, unsigned long arg);
 225 static void edge_break(struct tty_struct *tty, int break_state);
 226 static int  edge_tiocmget(struct tty_struct *tty, struct file *file);
 227 static int  edge_tiocmset(struct tty_struct *tty, struct file *file,
 228                                         unsigned int set, unsigned int clear);
 229 static int  edge_startup(struct usb_serial *serial);
 230 static void edge_shutdown(struct usb_serial *serial);
 231
 232 #include "io_tables.h"  /* all of the devices that this driver supports */
 233
 234 /* function prototypes for all of our local functions */
 235
 236 static void  process_rcvd_data(struct edgeport_serial *edge_serial,
 237                                 unsigned char *buffer, __u16 bufferLength);
 238 static void process_rcvd_status(struct edgeport_serial *edge_serial,
 239                                 __u8 byte2, __u8 byte3);
 240 static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
 241                                 unsigned char *data, int length);
 242 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr);
 243 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
 244                                 __u8 lsr, __u8 data);
 245 static int  send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command,
 246                                 __u8 param);
 247 static int  calc_baud_rate_divisor(int baud_rate, int *divisor);
 248 static int  send_cmd_write_baud_rate(struct edgeport_port *edge_port,
 249                                 int baudRate);
 250 static void change_port_settings(struct tty_struct *tty,
 251                                 struct edgeport_port *edge_port,
 252                                 struct ktermios *old_termios);
 253 static int  send_cmd_write_uart_register(struct edgeport_port *edge_port,
 254                                 __u8 regNum, __u8 regValue);
 255 static int  write_cmd_usb(struct edgeport_port *edge_port,
 256                                 unsigned char *buffer, int writeLength);
 257 static void send_more_port_data(struct edgeport_serial *edge_serial,
 258                                 struct edgeport_port *edge_port);
 259
 260 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 261                                         __u16 length, const __u8 *data);
 262 static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 263                                                 __u16 length, __u8 *data);
 264 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 265                                         __u16 length, const __u8 *data);
 266 static void get_manufacturing_desc(struct edgeport_serial *edge_serial);
 267 static void get_boot_desc(struct edgeport_serial *edge_serial);
 268 static void load_application_firmware(struct edgeport_serial *edge_serial);
 269
 270 static void unicode_to_ascii(char *string, int buflen,
 271                                 __le16 *unicode, int unicode_size);
 272
 273
 274 /* ************************************************************************ */
 275 /* ************************************************************************ */
 276 /* ************************************************************************ */
 277 /* ************************************************************************ */
 278
 279 /************************************************************************
 280  *                                                                      *
 281  * update_edgeport_E2PROM()     Compare current versions of             *
 282  *                              Boot ROM and Manufacture                *
 283  *                              Descriptors with versions               *
 284  *                              embedded in this driver                 *
 285  *                                                                      *
 286  ************************************************************************/
 287 static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 288 {
 289         __u32 BootCurVer;
 290         __u32 BootNewVer;
 291         __u8 BootMajorVersion;
 292         __u8 BootMinorVersion;
 293         __u16 BootBuildNumber;
 294         __u32 Bootaddr;
 295         const struct ihex_binrec *rec;
 296         const struct firmware *fw;
 297         const char *fw_name;
 298         int response;
 299
 300         switch (edge_serial->product_info.iDownloadFile) {
 301         case EDGE_DOWNLOAD_FILE_I930:
 302                 fw_name = "edgeport/boot.fw";
 303                 break;
 304         case EDGE_DOWNLOAD_FILE_80251:
 305                 fw_name = "edgeport/boot2.fw";
 306                 break;
 307         default:
 308                 return;
 309         }
 310
 311         response = request_ihex_firmware(&fw, fw_name,
 312                                          &edge_serial->serial->dev->dev);
 313         if (response) {
 314                 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
 315                        fw_name, response);
 316                 return;
 317         }
 318
 319         rec = (const struct ihex_binrec *)fw->data;
 320         BootMajorVersion = rec->data[0];
 321         BootMinorVersion = rec->data[1];
 322         BootBuildNumber = (rec->data[2] << 8) | rec->data[3];
 323
 324         /* Check Boot Image Version */
 325         BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) +
 326                      (edge_serial->boot_descriptor.MinorVersion << 16) +
 327                       le16_to_cpu(edge_serial->boot_descriptor.BuildNumber);
 328
 329         BootNewVer = (BootMajorVersion << 24) +
 330                      (BootMinorVersion << 16) +
 331                       BootBuildNumber;
 332
 333         dbg("Current Boot Image version %d.%d.%d",
 334             edge_serial->boot_descriptor.MajorVersion,
 335             edge_serial->boot_descriptor.MinorVersion,
 336             le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
 337
 338
 339         if (BootNewVer > BootCurVer) {
 340                 dbg("**Update Boot Image from %d.%d.%d to %d.%d.%d",
 341                     edge_serial->boot_descriptor.MajorVersion,
 342                     edge_serial->boot_descriptor.MinorVersion,
 343                     le16_to_cpu(edge_serial->boot_descriptor.BuildNumber),
 344                     BootMajorVersion, BootMinorVersion, BootBuildNumber);
 345
 346                 dbg("Downloading new Boot Image");
 347
 348                 for (rec = ihex_next_binrec(rec); rec;
 349                      rec = ihex_next_binrec(rec)) {
 350                         Bootaddr = be32_to_cpu(rec->addr);
 351                         response = rom_write(edge_serial->serial,
 352                                              Bootaddr >> 16,
 353                                              Bootaddr & 0xFFFF,
 354                                              be16_to_cpu(rec->len),
 355                                              &rec->data[0]);
 356                         if (response < 0) {
 357                                 dev_err(&edge_serial->serial->dev->dev,
 358                                         "rom_write failed (%x, %x, %d)\n",
 359                                         Bootaddr >> 16, Bootaddr & 0xFFFF,
 360                                         be16_to_cpu(rec->len));
 361                                 break;
 362                         }
 363                 }
 364         } else {
 365                 dbg("Boot Image -- already up to date");
 366         }
 367         release_firmware(fw);
 368 }
 369
 370
 371 /************************************************************************
 372  *                                                                      *
 373  *  Get string descriptor from device                                   *
 374  *                                                                      *
 375  ************************************************************************/
 376 static int get_string(struct usb_device *dev, int Id, char *string, int buflen)
 377 {
 378         struct usb_string_descriptor StringDesc;
 379         struct usb_string_descriptor *pStringDesc;
 380
 381         dbg("%s - USB String ID = %d", __func__, Id);
 382
 383         if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
 384                                         &StringDesc, sizeof(StringDesc)))
 385                 return 0;
 386
 387         pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
 388         if (!pStringDesc)
 389                 return 0;
 390
 391         if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
 392                                         pStringDesc, StringDesc.bLength)) {
 393                 kfree(pStringDesc);
 394                 return 0;
 395         }
 396
 397         unicode_to_ascii(string, buflen,
 398                                 pStringDesc->wData, pStringDesc->bLength/2);
 399
 400         kfree(pStringDesc);
 401         dbg("%s - USB String %s", __func__, string);
 402         return strlen(string);
 403 }
 404
 405
 406 #if 0
 407 /************************************************************************
 408  *
 409  *  Get string descriptor from device
 410  *
 411  ************************************************************************/
 412 static int get_string_desc(struct usb_device *dev, int Id,
 413                                 struct usb_string_descriptor **pRetDesc)
 414 {
 415         struct usb_string_descriptor StringDesc;
 416         struct usb_string_descriptor *pStringDesc;
 417
 418         dbg("%s - USB String ID = %d", __func__, Id);
 419
 420         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc,
 421                                                 sizeof(StringDesc)))
 422                 return 0;
 423
 424         pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
 425         if (!pStringDesc)
 426                 return -1;
 427
 428         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc,
 429                                                         StringDesc.bLength)) {
 430                 kfree(pStringDesc);
 431                 return -1;
 432         }
 433
 434         *pRetDesc = pStringDesc;
 435         return 0;
 436 }
 437 #endif
 438
 439 static void dump_product_info(struct edgeport_product_info *product_info)
 440 {
 441         /* Dump Product Info structure */
 442         dbg("**Product Information:");
 443         dbg("  ProductId             %x", product_info->ProductId);
 444         dbg("  NumPorts              %d", product_info->NumPorts);
 445         dbg("  ProdInfoVer           %d", product_info->ProdInfoVer);
 446         dbg("  IsServer              %d", product_info->IsServer);
 447         dbg("  IsRS232               %d", product_info->IsRS232);
 448         dbg("  IsRS422               %d", product_info->IsRS422);
 449         dbg("  IsRS485               %d", product_info->IsRS485);
 450         dbg("  RomSize               %d", product_info->RomSize);
 451         dbg("  RamSize               %d", product_info->RamSize);
 452         dbg("  CpuRev                %x", product_info->CpuRev);
 453         dbg("  BoardRev              %x", product_info->BoardRev);
 454         dbg("  BootMajorVersion      %d.%d.%d", product_info->BootMajorVersion,
 455             product_info->BootMinorVersion,
 456             le16_to_cpu(product_info->BootBuildNumber));
 457         dbg("  FirmwareMajorVersion  %d.%d.%d",
 458                         product_info->FirmwareMajorVersion,
 459                         product_info->FirmwareMinorVersion,
 460                         le16_to_cpu(product_info->FirmwareBuildNumber));
 461         dbg("  ManufactureDescDate   %d/%d/%d",
 462                         product_info->ManufactureDescDate[0],
 463                         product_info->ManufactureDescDate[1],
 464                         product_info->ManufactureDescDate[2]+1900);
 465         dbg("  iDownloadFile         0x%x", product_info->iDownloadFile);
 466         dbg("  EpicVer               %d", product_info->EpicVer);
 467 }
 468
 469 static void get_product_info(struct edgeport_serial *edge_serial)
 470 {
 471         struct edgeport_product_info *product_info = &edge_serial->product_info;
 472
 473         memset(product_info, 0, sizeof(struct edgeport_product_info));
 474
 475         product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
 476         product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts;
 477         product_info->ProdInfoVer = 0;
 478
 479         product_info->RomSize = edge_serial->manuf_descriptor.RomSize;
 480         product_info->RamSize = edge_serial->manuf_descriptor.RamSize;
 481         product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev;
 482         product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev;
 483
 484         product_info->BootMajorVersion =
 485                                 edge_serial->boot_descriptor.MajorVersion;
 486         product_info->BootMinorVersion =
 487                                 edge_serial->boot_descriptor.MinorVersion;
 488         product_info->BootBuildNumber =
 489                                 edge_serial->boot_descriptor.BuildNumber;
 490
 491         memcpy(product_info->ManufactureDescDate,
 492                         edge_serial->manuf_descriptor.DescDate,
 493                         sizeof(edge_serial->manuf_descriptor.DescDate));
 494
 495         /* check if this is 2nd generation hardware */
 496         if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct)
 497                                             & ION_DEVICE_ID_80251_NETCHIP)
 498                 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
 499         else
 500                 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
 501
 502         /* Determine Product type and set appropriate flags */
 503         switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
 504         case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
 505         case ION_DEVICE_ID_EDGEPORT_4T:
 506         case ION_DEVICE_ID_EDGEPORT_4:
 507         case ION_DEVICE_ID_EDGEPORT_2:
 508         case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
 509         case ION_DEVICE_ID_EDGEPORT_8:
 510         case ION_DEVICE_ID_EDGEPORT_421:
 511         case ION_DEVICE_ID_EDGEPORT_21:
 512         case ION_DEVICE_ID_EDGEPORT_2_DIN:
 513         case ION_DEVICE_ID_EDGEPORT_4_DIN:
 514         case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
 515                 product_info->IsRS232 = 1;
 516                 break;
 517
 518         case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */
 519                 product_info->IsRS422 = 1;
 520                 product_info->IsRS485 = 1;
 521                 break;
 522
 523         case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */
 524         case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */
 525                 product_info->IsRS422 = 1;
 526                 break;
 527         }
 528
 529         dump_product_info(product_info);
 530 }
 531
 532 static int get_epic_descriptor(struct edgeport_serial *ep)
 533 {
 534         int result;
 535         struct usb_serial *serial = ep->serial;
 536         struct edgeport_product_info *product_info = &ep->product_info;
 537         struct edge_compatibility_descriptor *epic = &ep->epic_descriptor;
 538         struct edge_compatibility_bits *bits;
 539
 540         ep->is_epic = 0;
 541         result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 542                                  USB_REQUEST_ION_GET_EPIC_DESC,
 543                                  0xC0, 0x00, 0x00,
 544                                  &ep->epic_descriptor,
 545                                  sizeof(struct edge_compatibility_descriptor),
 546                                  300);
 547
 548         dbg("%s result = %d", __func__, result);
 549
 550         if (result > 0) {
 551                 ep->is_epic = 1;
 552                 memset(product_info, 0, sizeof(struct edgeport_product_info));
 553
 554                 product_info->NumPorts = epic->NumPorts;
 555                 product_info->ProdInfoVer = 0;
 556                 product_info->FirmwareMajorVersion = epic->MajorVersion;
 557                 product_info->FirmwareMinorVersion = epic->MinorVersion;
 558                 product_info->FirmwareBuildNumber = epic->BuildNumber;
 559                 product_info->iDownloadFile = epic->iDownloadFile;
 560                 product_info->EpicVer = epic->EpicVer;
 561                 product_info->Epic = epic->Supports;
 562                 product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
 563                 dump_product_info(product_info);
 564
 565                 bits = &ep->epic_descriptor.Supports;
 566                 dbg("**EPIC descriptor:");
 567                 dbg("  VendEnableSuspend: %s", bits->VendEnableSuspend  ? "TRUE": "FALSE");
 568                 dbg("  IOSPOpen         : %s", bits->IOSPOpen           ? "TRUE": "FALSE");
 569                 dbg("  IOSPClose        : %s", bits->IOSPClose          ? "TRUE": "FALSE");
 570                 dbg("  IOSPChase        : %s", bits->IOSPChase          ? "TRUE": "FALSE");
 571                 dbg("  IOSPSetRxFlow    : %s", bits->IOSPSetRxFlow      ? "TRUE": "FALSE");
 572                 dbg("  IOSPSetTxFlow    : %s", bits->IOSPSetTxFlow      ? "TRUE": "FALSE");
 573                 dbg("  IOSPSetXChar     : %s", bits->IOSPSetXChar       ? "TRUE": "FALSE");
 574                 dbg("  IOSPRxCheck      : %s", bits->IOSPRxCheck        ? "TRUE": "FALSE");
 575                 dbg("  IOSPSetClrBreak  : %s", bits->IOSPSetClrBreak    ? "TRUE": "FALSE");
 576                 dbg("  IOSPWriteMCR     : %s", bits->IOSPWriteMCR       ? "TRUE": "FALSE");
 577                 dbg("  IOSPWriteLCR     : %s", bits->IOSPWriteLCR       ? "TRUE": "FALSE");
 578                 dbg("  IOSPSetBaudRate  : %s", bits->IOSPSetBaudRate    ? "TRUE": "FALSE");
 579                 dbg("  TrueEdgeport     : %s", bits->TrueEdgeport       ? "TRUE": "FALSE");
 580         }
 581
 582         return result;
 583 }
 584
 585
 586 /************************************************************************/
 587 /************************************************************************/
 588 /*            U S B  C A L L B A C K   F U N C T I O N S                */
 589 /*            U S B  C A L L B A C K   F U N C T I O N S                */
 590 /************************************************************************/
 591 /************************************************************************/
 592
 593 /*****************************************************************************
 594  * edge_interrupt_callback
 595  *      this is the callback function for when we have received data on the
 596  *      interrupt endpoint.
 597  *****************************************************************************/
 598 static void edge_interrupt_callback(struct urb *urb)
 599 {
 600         struct edgeport_serial  *edge_serial = urb->context;
 601         struct edgeport_port *edge_port;
 602         struct usb_serial_port *port;
 603         struct tty_struct *tty;
 604         unsigned char *data = urb->transfer_buffer;
 605         int length = urb->actual_length;
 606         int bytes_avail;
 607         int position;
 608         int txCredits;
 609         int portNumber;
 610         int result;
 611         int status = urb->status;
 612
 613         dbg("%s", __func__);
 614
 615         switch (status) {
 616         case 0:
 617                 /* success */
 618                 break;
 619         case -ECONNRESET:
 620         case -ENOENT:
 621         case -ESHUTDOWN:
 622                 /* this urb is terminated, clean up */
 623                 dbg("%s - urb shutting down with status: %d",
 624                                                 __func__, status);
 625                 return;
 626         default:
 627                 dbg("%s - nonzero urb status received: %d", __func__, status);
 628                 goto exit;
 629         }
 630
 631         /* process this interrupt-read even if there are no ports open */
 632         if (length) {
 633                 usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
 634                                                 __func__, length, data);
 635
 636                 if (length > 1) {
 637                         bytes_avail = data[0] | (data[1] << 8);
 638                         if (bytes_avail) {
 639                                 spin_lock(&edge_serial->es_lock);
 640                                 edge_serial->rxBytesAvail += bytes_avail;
 641                                 dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __func__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress);
 642
 643                                 if (edge_serial->rxBytesAvail > 0 &&
 644                                     !edge_serial->read_in_progress) {
 645                                         dbg("%s - posting a read", __func__);
 646                                         edge_serial->read_in_progress = true;
 647
 648                                         /* we have pending bytes on the
 649                                            bulk in pipe, send a request */
 650                                         edge_serial->read_urb->dev = edge_serial->serial->dev;
 651                                         result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 652                                         if (result) {
 653                                                 dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result);
 654                                                 edge_serial->read_in_progress = false;
 655                                         }
 656                                 }
 657                                 spin_unlock(&edge_serial->es_lock);
 658                         }
 659                 }
 660                 /* grab the txcredits for the ports if available */
 661                 position = 2;
 662                 portNumber = 0;
 663                 while ((position < length) &&
 664                                 (portNumber < edge_serial->serial->num_ports)) {
 665                         txCredits = data[position] | (data[position+1] << 8);
 666                         if (txCredits) {
 667                                 port = edge_serial->serial->port[portNumber];
 668                                 edge_port = usb_get_serial_port_data(port);
 669                                 if (edge_port->open) {
 670                                         spin_lock(&edge_port->ep_lock);
 671                                         edge_port->txCredits += txCredits;
 672                                         spin_unlock(&edge_port->ep_lock);
 673                                         dbg("%s - txcredits for port%d = %d",
 674                                                         __func__, portNumber,
 675                                                         edge_port->txCredits);
 676
 677                                         /* tell the tty driver that something
 678                                            has changed */
 679                                         tty = tty_port_tty_get(
 680                                                 &edge_port->port->port);
 681                                         if (tty) {
 682                                                 tty_wakeup(tty);
 683                                                 tty_kref_put(tty);
 684                                         }
 685                                         /* Since we have more credit, check
 686                                            if more data can be sent */
 687                                         send_more_port_data(edge_serial,
 688                                                                 edge_port);
 689                                 }
 690                         }
 691                         position += 2;
 692                         ++portNumber;
 693                 }
 694         }
 695
 696 exit:
 697         result = usb_submit_urb(urb, GFP_ATOMIC);
 698         if (result)
 699                 dev_err(&urb->dev->dev,
 700                         "%s - Error %d submitting control urb\n",
 701                                                 __func__, result);
 702 }
 703
 704
 705 /*****************************************************************************
 706  * edge_bulk_in_callback
 707  *      this is the callback function for when we have received data on the
 708  *      bulk in endpoint.
 709  *****************************************************************************/
 710 static void edge_bulk_in_callback(struct urb *urb)
 711 {
 712         struct edgeport_serial  *edge_serial = urb->context;
 713         unsigned char           *data = urb->transfer_buffer;
 714         int                     retval;
 715         __u16                   raw_data_length;
 716         int status = urb->status;
 717
 718         dbg("%s", __func__);
 719
 720         if (status) {
 721                 dbg("%s - nonzero read bulk status received: %d",
 722                     __func__, status);
 723                 edge_serial->read_in_progress = false;
 724                 return;
 725         }
 726
 727         if (urb->actual_length == 0) {
 728                 dbg("%s - read bulk callback with no data", __func__);
 729                 edge_serial->read_in_progress = false;
 730                 return;
 731         }
 732
 733         raw_data_length = urb->actual_length;
 734
 735         usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
 736                                         __func__, raw_data_length, data);
 737
 738         spin_lock(&edge_serial->es_lock);
 739
 740         /* decrement our rxBytes available by the number that we just got */
 741         edge_serial->rxBytesAvail -= raw_data_length;
 742
 743         dbg("%s - Received = %d, rxBytesAvail %d", __func__,
 744                                 raw_data_length, edge_serial->rxBytesAvail);
 745
 746         process_rcvd_data(edge_serial, data, urb->actual_length);
 747
 748         /* check to see if there's any more data for us to read */
 749         if (edge_serial->rxBytesAvail > 0) {
 750                 dbg("%s - posting a read", __func__);
 751                 edge_serial->read_urb->dev = edge_serial->serial->dev;
 752                 retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 753                 if (retval) {
 754                         dev_err(&urb->dev->dev,
 755                                 "%s - usb_submit_urb(read bulk) failed, "
 756                                 "retval = %d\n", __func__, retval);
 757                         edge_serial->read_in_progress = false;
 758                 }
 759         } else {
 760                 edge_serial->read_in_progress = false;
 761         }
 762
 763         spin_unlock(&edge_serial->es_lock);
 764 }
 765
 766
 767 /*****************************************************************************
 768  * edge_bulk_out_data_callback
 769  *      this is the callback function for when we have finished sending
 770  *      serial data on the bulk out endpoint.
 771  *****************************************************************************/
 772 static void edge_bulk_out_data_callback(struct urb *urb)
 773 {
 774         struct edgeport_port *edge_port = urb->context;
 775         struct tty_struct *tty;
 776         int status = urb->status;
 777
 778         dbg("%s", __func__);
 779
 780         if (status) {
 781                 dbg("%s - nonzero write bulk status received: %d",
 782                     __func__, status);
 783         }
 784
 785         tty = tty_port_tty_get(&edge_port->port->port);
 786
 787         if (tty && edge_port->open) {
 788                 /* let the tty driver wakeup if it has a special
 789                    write_wakeup function */
 790                 tty_wakeup(tty);
 791         }
 792         tty_kref_put(tty);
 793
 794         /* Release the Write URB */
 795         edge_port->write_in_progress = false;
 796
 797         /* Check if more data needs to be sent */
 798         send_more_port_data((struct edgeport_serial *)
 799                 (usb_get_serial_data(edge_port->port->serial)), edge_port);
 800 }
 801
 802
 803 /*****************************************************************************
 804  * BulkOutCmdCallback
 805  *      this is the callback function for when we have finished sending a
 806  *      command on the bulk out endpoint.
 807  *****************************************************************************/
 808 static void edge_bulk_out_cmd_callback(struct urb *urb)
 809 {
 810         struct edgeport_port *edge_port = urb->context;
 811         struct tty_struct *tty;
 812         int status = urb->status;
 813
 814         dbg("%s", __func__);
 815
 816         atomic_dec(&CmdUrbs);
 817         dbg("%s - FREE URB %p (outstanding %d)", __func__,
 818                                         urb, atomic_read(&CmdUrbs));
 819
 820
 821         /* clean up the transfer buffer */
 822         kfree(urb->transfer_buffer);
 823
 824         /* Free the command urb */
 825         usb_free_urb(urb);
 826
 827         if (status) {
 828                 dbg("%s - nonzero write bulk status received: %d",
 829                                                         __func__, status);
 830                 return;
 831         }
 832
 833         /* Get pointer to tty */
 834         tty = tty_port_tty_get(&edge_port->port->port);
 835
 836         /* tell the tty driver that something has changed */
 837         if (tty && edge_port->open)
 838                 tty_wakeup(tty);
 839         tty_kref_put(tty);
 840
 841         /* we have completed the command */
 842         edge_port->commandPending = false;
 843         wake_up(&edge_port->wait_command);
 844 }
 845
 846
 847 /*****************************************************************************
 848  * Driver tty interface functions
 849  *****************************************************************************/
 850
 851 /*****************************************************************************
 852  * SerialOpen
 853  *      this function is called by the tty driver when a port is opened
 854  *      If successful, we return 0
 855  *      Otherwise we return a negative error number.
 856  *****************************************************************************/
 857 static int edge_open(struct tty_struct *tty,
 858                         struct usb_serial_port *port, struct file *filp)
 859 {
 860         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 861         struct usb_serial *serial;
 862         struct edgeport_serial *edge_serial;
 863         int response;
 864
 865         dbg("%s - port %d", __func__, port->number);
 866
 867         if (edge_port == NULL)
 868                 return -ENODEV;
 869
 870         if (tty)
 871                 tty->low_latency = low_latency;
 872
 873         /* see if we've set up our endpoint info yet (can't set it up
 874            in edge_startup as the structures were not set up at that time.) */
 875         serial = port->serial;
 876         edge_serial = usb_get_serial_data(serial);
 877         if (edge_serial == NULL)
 878                 return -ENODEV;
 879         if (edge_serial->interrupt_in_buffer == NULL) {
 880                 struct usb_serial_port *port0 = serial->port[0];
 881
 882                 /* not set up yet, so do it now */
 883                 edge_serial->interrupt_in_buffer =
 884                                         port0->interrupt_in_buffer;
 885                 edge_serial->interrupt_in_endpoint =
 886                                         port0->interrupt_in_endpointAddress;
 887                 edge_serial->interrupt_read_urb = port0->interrupt_in_urb;
 888                 edge_serial->bulk_in_buffer = port0->bulk_in_buffer;
 889                 edge_serial->bulk_in_endpoint =
 890                                         port0->bulk_in_endpointAddress;
 891                 edge_serial->read_urb = port0->read_urb;
 892                 edge_serial->bulk_out_endpoint =
 893                                         port0->bulk_out_endpointAddress;
 894
 895                 /* set up our interrupt urb */
 896                 usb_fill_int_urb(edge_serial->interrupt_read_urb,
 897                       serial->dev,
 898                       usb_rcvintpipe(serial->dev,
 899                                 port0->interrupt_in_endpointAddress),
 900                       port0->interrupt_in_buffer,
 901                       edge_serial->interrupt_read_urb->transfer_buffer_length,
 902                       edge_interrupt_callback, edge_serial,
 903                       edge_serial->interrupt_read_urb->interval);
 904
 905                 /* set up our bulk in urb */
 906                 usb_fill_bulk_urb(edge_serial->read_urb, serial->dev,
 907                         usb_rcvbulkpipe(serial->dev,
 908                                 port0->bulk_in_endpointAddress),
 909                         port0->bulk_in_buffer,
 910                         edge_serial->read_urb->transfer_buffer_length,
 911                         edge_bulk_in_callback, edge_serial);
 912                 edge_serial->read_in_progress = false;
 913
 914                 /* start interrupt read for this edgeport
 915                  * this interrupt will continue as long
 916                  * as the edgeport is connected */
 917                 response = usb_submit_urb(edge_serial->interrupt_read_urb,
 918                                                                 GFP_KERNEL);
 919                 if (response) {
 920                         dev_err(&port->dev,
 921                                 "%s - Error %d submitting control urb\n",
 922                                                         __func__, response);
 923                 }
 924         }
 925
 926         /* initialize our wait queues */
 927         init_waitqueue_head(&edge_port->wait_open);
 928         init_waitqueue_head(&edge_port->wait_chase);
 929         init_waitqueue_head(&edge_port->delta_msr_wait);
 930         init_waitqueue_head(&edge_port->wait_command);
 931
 932         /* initialize our icount structure */
 933         memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
 934
 935         /* initialize our port settings */
 936         edge_port->txCredits = 0;       /* Can't send any data yet */
 937         /* Must always set this bit to enable ints! */
 938         edge_port->shadowMCR = MCR_MASTER_IE;
 939         edge_port->chaseResponsePending = false;
 940
 941         /* send a open port command */
 942         edge_port->openPending = true;
 943         edge_port->open        = false;
 944         response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0);
 945
 946         if (response < 0) {
 947                 dev_err(&port->dev, "%s - error sending open port command\n",
 948                                                                 __func__);
 949                 edge_port->openPending = false;
 950                 return -ENODEV;
 951         }
 952
 953         /* now wait for the port to be completely opened */
 954         wait_event_timeout(edge_port->wait_open, !edge_port->openPending,
 955                                                                 OPEN_TIMEOUT);
 956
 957         if (!edge_port->open) {
 958                 /* open timed out */
 959                 dbg("%s - open timedout", __func__);
 960                 edge_port->openPending = false;
 961                 return -ENODEV;
 962         }
 963
 964         /* create the txfifo */
 965         edge_port->txfifo.head  = 0;
 966         edge_port->txfifo.tail  = 0;
 967         edge_port->txfifo.count = 0;
 968         edge_port->txfifo.size  = edge_port->maxTxCredits;
 969         edge_port->txfifo.fifo  = kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
 970
 971         if (!edge_port->txfifo.fifo) {
 972                 dbg("%s - no memory", __func__);
 973                 edge_close(tty, port, filp);
 974                 return -ENOMEM;
 975         }
 976
 977         /* Allocate a URB for the write */
 978         edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 979         edge_port->write_in_progress = false;
 980
 981         if (!edge_port->write_urb) {
 982                 dbg("%s - no memory", __func__);
 983                 edge_close(tty, port, filp);
 984                 return -ENOMEM;
 985         }
 986
 987         dbg("%s(%d) - Initialize TX fifo to %d bytes",
 988                         __func__, port->number, edge_port->maxTxCredits);
 989
 990         dbg("%s exited", __func__);
 991
 992         return 0;
 993 }
 994
 995
 996 /************************************************************************
 997  *
 998  * block_until_chase_response
 999  *
1000  *      This function will block the close until one of the following:
1001  *              1. Response to our Chase comes from Edgeport
1002  *              2. A timeout of 10 seconds without activity has expired
1003  *                 (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
1004  *
1005  ************************************************************************/
1006 static void block_until_chase_response(struct edgeport_port *edge_port)
1007 {
1008         DEFINE_WAIT(wait);
1009         __u16 lastCredits;
1010         int timeout = 1*HZ;
1011         int loop = 10;
1012
1013         while (1) {
1014                 /* Save Last credits */
1015                 lastCredits = edge_port->txCredits;
1016
1017                 /* Did we get our Chase response */
1018                 if (!edge_port->chaseResponsePending) {
1019                         dbg("%s - Got Chase Response", __func__);
1020
1021                         /* did we get all of our credit back? */
1022                         if (edge_port->txCredits == edge_port->maxTxCredits) {
1023                                 dbg("%s - Got all credits", __func__);
1024                                 return;
1025                         }
1026                 }
1027
1028                 /* Block the thread for a while */
1029                 prepare_to_wait(&edge_port->wait_chase, &wait,
1030                                                 TASK_UNINTERRUPTIBLE);
1031                 schedule_timeout(timeout);
1032                 finish_wait(&edge_port->wait_chase, &wait);
1033
1034                 if (lastCredits == edge_port->txCredits) {
1035                         /* No activity.. count down. */
1036                         loop--;
1037                         if (loop == 0) {
1038                                 edge_port->chaseResponsePending = false;
1039                                 dbg("%s - Chase TIMEOUT", __func__);
1040                                 return;
1041                         }
1042                 } else {
1043                         /* Reset timeout value back to 10 seconds */
1044                         dbg("%s - Last %d, Current %d", __func__,
1045                                         lastCredits, edge_port->txCredits);
1046                         loop = 10;
1047                 }
1048         }
1049 }
1050
1051
1052 /************************************************************************
1053  *
1054  * block_until_tx_empty
1055  *
1056  *      This function will block the close until one of the following:
1057  *              1. TX count are 0
1058  *              2. The edgeport has stopped
1059  *              3. A timeout of 3 seconds without activity has expired
1060  *
1061  ************************************************************************/
1062 static void block_until_tx_empty(struct edgeport_port *edge_port)
1063 {
1064         DEFINE_WAIT(wait);
1065         struct TxFifo *fifo = &edge_port->txfifo;
1066         __u32 lastCount;
1067         int timeout = HZ/10;
1068         int loop = 30;
1069
1070         while (1) {
1071                 /* Save Last count */
1072                 lastCount = fifo->count;
1073
1074                 /* Is the Edgeport Buffer empty? */
1075                 if (lastCount == 0) {
1076                         dbg("%s - TX Buffer Empty", __func__);
1077                         return;
1078                 }
1079
1080                 /* Block the thread for a while */
1081                 prepare_to_wait(&edge_port->wait_chase, &wait,
1082                                                 TASK_UNINTERRUPTIBLE);
1083                 schedule_timeout(timeout);
1084                 finish_wait(&edge_port->wait_chase, &wait);
1085
1086                 dbg("%s wait", __func__);
1087
1088                 if (lastCount == fifo->count) {
1089                         /* No activity.. count down. */
1090                         loop--;
1091                         if (loop == 0) {
1092                                 dbg("%s - TIMEOUT", __func__);
1093                                 return;
1094                         }
1095                 } else {
1096                         /* Reset timeout value back to seconds */
1097                         loop = 30;
1098                 }
1099         }
1100 }
1101
1102
1103 /*****************************************************************************
1104  * edge_close
1105  *      this function is called by the tty driver when a port is closed
1106  *****************************************************************************/
1107 static void edge_close(struct tty_struct *tty,
1108                         struct usb_serial_port *port, struct file *filp)
1109 {
1110         struct edgeport_serial *edge_serial;
1111         struct edgeport_port *edge_port;
1112         int status;
1113
1114         dbg("%s - port %d", __func__, port->number);
1115
1116         edge_serial = usb_get_serial_data(port->serial);
1117         edge_port = usb_get_serial_port_data(port);
1118         if (edge_serial == NULL || edge_port == NULL)
1119                 return;
1120
1121         /* block until tx is empty */
1122         block_until_tx_empty(edge_port);
1123
1124         edge_port->closePending = true;
1125
1126         if ((!edge_serial->is_epic) ||
1127             ((edge_serial->is_epic) &&
1128              (edge_serial->epic_descriptor.Supports.IOSPChase))) {
1129                 /* flush and chase */
1130                 edge_port->chaseResponsePending = true;
1131
1132                 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
1133                 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
1134                 if (status == 0)
1135                         /* block until chase finished */
1136                         block_until_chase_response(edge_port);
1137                 else
1138                         edge_port->chaseResponsePending = false;
1139         }
1140
1141         if ((!edge_serial->is_epic) ||
1142             ((edge_serial->is_epic) &&
1143              (edge_serial->epic_descriptor.Supports.IOSPClose))) {
1144                /* close the port */
1145                 dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__);
1146                 send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
1147         }
1148
1149         /* port->close = true; */
1150         edge_port->closePending = false;
1151         edge_port->open = false;
1152         edge_port->openPending = false;
1153
1154         usb_kill_urb(edge_port->write_urb);
1155
1156         if (edge_port->write_urb) {
1157                 /* if this urb had a transfer buffer already
1158                                 (old transfer) free it */
1159                 kfree(edge_port->write_urb->transfer_buffer);
1160                 usb_free_urb(edge_port->write_urb);
1161                 edge_port->write_urb = NULL;
1162         }
1163         kfree(edge_port->txfifo.fifo);
1164         edge_port->txfifo.fifo = NULL;
1165
1166         dbg("%s exited", __func__);
1167 }
1168
1169 /*****************************************************************************
1170  * SerialWrite
1171  *      this function is called by the tty driver when data should be written
1172  *      to the port.
1173  *      If successful, we return the number of bytes written, otherwise we
1174  *      return a negative error number.
1175  *****************************************************************************/
1176 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
1177                                         const unsigned char *data, int count)
1178 {
1179         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1180         struct TxFifo *fifo;
1181         int copySize;
1182         int bytesleft;
1183         int firsthalf;
1184         int secondhalf;
1185         unsigned long flags;
1186
1187         dbg("%s - port %d", __func__, port->number);
1188
1189         if (edge_port == NULL)
1190                 return -ENODEV;
1191
1192         /* get a pointer to the Tx fifo */
1193         fifo = &edge_port->txfifo;
1194
1195         spin_lock_irqsave(&edge_port->ep_lock, flags);
1196
1197         /* calculate number of bytes to put in fifo */
1198         copySize = min((unsigned int)count,
1199                                 (edge_port->txCredits - fifo->count));
1200
1201         dbg("%s(%d) of %d byte(s) Fifo room  %d -- will copy %d bytes",
1202                         __func__, port->number, count,
1203                         edge_port->txCredits - fifo->count, copySize);
1204
1205         /* catch writes of 0 bytes which the tty driver likes to give us,
1206            and when txCredits is empty */
1207         if (copySize == 0) {
1208                 dbg("%s - copySize = Zero", __func__);
1209                 goto finish_write;
1210         }
1211
1212         /* queue the data
1213          * since we can never overflow the buffer we do not have to check for a
1214          * full condition
1215          *
1216          * the copy is done is two parts -- first fill to the end of the buffer
1217          * then copy the reset from the start of the buffer
1218          */
1219         bytesleft = fifo->size - fifo->head;
1220         firsthalf = min(bytesleft, copySize);
1221         dbg("%s - copy %d bytes of %d into fifo ", __func__,
1222                                         firsthalf, bytesleft);
1223
1224         /* now copy our data */
1225         memcpy(&fifo->fifo[fifo->head], data, firsthalf);
1226         usb_serial_debug_data(debug, &port->dev, __func__,
1227                                         firsthalf, &fifo->fifo[fifo->head]);
1228
1229         /* update the index and size */
1230         fifo->head  += firsthalf;
1231         fifo->count += firsthalf;
1232
1233         /* wrap the index */
1234         if (fifo->head == fifo->size)
1235                 fifo->head = 0;
1236
1237         secondhalf = copySize-firsthalf;
1238
1239         if (secondhalf) {
1240                 dbg("%s - copy rest of data %d", __func__, secondhalf);
1241                 memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
1242                 usb_serial_debug_data(debug, &port->dev, __func__,
1243                                         secondhalf, &fifo->fifo[fifo->head]);
1244                 /* update the index and size */
1245                 fifo->count += secondhalf;
1246                 fifo->head  += secondhalf;
1247                 /* No need to check for wrap since we can not get to end of
1248                  * the fifo in this part
1249                  */
1250         }
1251
1252 finish_write:
1253         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1254
1255         send_more_port_data((struct edgeport_serial *)
1256                         usb_get_serial_data(port->serial), edge_port);
1257
1258         dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__,
1259                                 copySize, edge_port->txCredits, fifo->count);
1260
1261         return copySize;
1262 }
1263
1264
1265 /************************************************************************
1266  *
1267  * send_more_port_data()
1268  *
1269  *      This routine attempts to write additional UART transmit data
1270  *      to a port over the USB bulk pipe. It is called (1) when new
1271  *      data has been written to a port's TxBuffer from higher layers
1272  *      (2) when the peripheral sends us additional TxCredits indicating
1273  *      that it can accept more Tx data for a given port; and (3) when
1274  *      a bulk write completes successfully and we want to see if we
1275  *      can transmit more.
1276  *
1277  ************************************************************************/
1278 static void send_more_port_data(struct edgeport_serial *edge_serial,
1279                                         struct edgeport_port *edge_port)
1280 {
1281         struct TxFifo   *fifo = &edge_port->txfifo;
1282         struct urb      *urb;
1283         unsigned char   *buffer;
1284         int             status;
1285         int             count;
1286         int             bytesleft;
1287         int             firsthalf;
1288         int             secondhalf;
1289         unsigned long   flags;
1290
1291         dbg("%s(%d)", __func__, edge_port->port->number);
1292
1293         spin_lock_irqsave(&edge_port->ep_lock, flags);
1294
1295         if (edge_port->write_in_progress ||
1296             !edge_port->open             ||
1297             (fifo->count == 0)) {
1298                 dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d",
1299                                 __func__, edge_port->port->number,
1300                                 fifo->count, edge_port->write_in_progress);
1301                 goto exit_send;
1302         }
1303
1304         /* since the amount of data in the fifo will always fit into the
1305          * edgeport buffer we do not need to check the write length
1306          *
1307          * Do we have enough credits for this port to make it worthwhile
1308          * to bother queueing a write. If it's too small, say a few bytes,
1309          * it's better to wait for more credits so we can do a larger write.
1310          */
1311         if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
1312                 dbg("%s(%d) Not enough credit - fifo %d TxCredit %d",
1313                         __func__, edge_port->port->number, fifo->count,
1314                         edge_port->txCredits);
1315                 goto exit_send;
1316         }
1317
1318         /* lock this write */
1319         edge_port->write_in_progress = true;
1320
1321         /* get a pointer to the write_urb */
1322         urb = edge_port->write_urb;
1323
1324         /* make sure transfer buffer is freed */
1325         kfree(urb->transfer_buffer);
1326         urb->transfer_buffer = NULL;
1327
1328         /* build the data header for the buffer and port that we are about
1329            to send out */
1330         count = fifo->count;
1331         buffer = kmalloc(count+2, GFP_ATOMIC);
1332         if (buffer == NULL) {
1333                 dev_err(&edge_port->port->dev,
1334                                 "%s - no more kernel memory...\n", __func__);
1335                 edge_port->write_in_progress = false;
1336                 goto exit_send;
1337         }
1338         buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number
1339                                 - edge_port->port->serial->minor, count);
1340         buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number
1341                                 - edge_port->port->serial->minor, count);
1342
1343         /* now copy our data */
1344         bytesleft =  fifo->size - fifo->tail;
1345         firsthalf = min(bytesleft, count);
1346         memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf);
1347         fifo->tail  += firsthalf;
1348         fifo->count -= firsthalf;
1349         if (fifo->tail == fifo->size)
1350                 fifo->tail = 0;
1351
1352         secondhalf = count-firsthalf;
1353         if (secondhalf) {
1354                 memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail],
1355                                                                 secondhalf);
1356                 fifo->tail  += secondhalf;
1357                 fifo->count -= secondhalf;
1358         }
1359
1360         if (count)
1361                 usb_serial_debug_data(debug, &edge_port->port->dev,
1362                                                 __func__, count, &buffer[2]);
1363
1364         /* fill up the urb with all of our data and submit it */
1365         usb_fill_bulk_urb(urb, edge_serial->serial->dev,
1366                         usb_sndbulkpipe(edge_serial->serial->dev,
1367                                         edge_serial->bulk_out_endpoint),
1368                         buffer, count+2,
1369                         edge_bulk_out_data_callback, edge_port);
1370
1371         /* decrement the number of credits we have by the number we just sent */
1372         edge_port->txCredits -= count;
1373         edge_port->icount.tx += count;
1374
1375         urb->dev = edge_serial->serial->dev;
1376         status = usb_submit_urb(urb, GFP_ATOMIC);
1377         if (status) {
1378                 /* something went wrong */
1379                 dev_err(&edge_port->port->dev,
1380                         "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
1381                                 __func__, status);
1382                 edge_port->write_in_progress = false;
1383
1384                 /* revert the credits as something bad happened. */
1385                 edge_port->txCredits += count;
1386                 edge_port->icount.tx -= count;
1387         }
1388         dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d",
1389                         __func__, count, edge_port->txCredits, fifo->count);
1390
1391 exit_send:
1392         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1393 }
1394
1395
1396 /*****************************************************************************
1397  * edge_write_room
1398  *      this function is called by the tty driver when it wants to know how
1399  *      many bytes of data we can accept for a specific port. If successful,
1400  *      we return the amount of room that we have for this port (the txCredits)
1401  *      otherwise we return a negative error number.
1402  *****************************************************************************/
1403 static int edge_write_room(struct tty_struct *tty)
1404 {
1405         struct usb_serial_port *port = tty->driver_data;
1406         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1407         int room;
1408         unsigned long flags;
1409
1410         dbg("%s", __func__);
1411
1412         if (edge_port == NULL)
1413                 return 0;
1414         if (edge_port->closePending)
1415                 return 0;
1416
1417         dbg("%s - port %d", __func__, port->number);
1418
1419         if (!edge_port->open) {
1420                 dbg("%s - port not opened", __func__);
1421                 return 0;
1422         }
1423
1424         /* total of both buffers is still txCredit */
1425         spin_lock_irqsave(&edge_port->ep_lock, flags);
1426         room = edge_port->txCredits - edge_port->txfifo.count;
1427         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1428
1429         dbg("%s - returns %d", __func__, room);
1430         return room;
1431 }
1432
1433
1434 /*****************************************************************************
1435  * edge_chars_in_buffer
1436  *      this function is called by the tty driver when it wants to know how
1437  *      many bytes of data we currently have outstanding in the port (data that
1438  *      has been written, but hasn't made it out the port yet)
1439  *      If successful, we return the number of bytes left to be written in the
1440  *      system,
1441  *      Otherwise we return a negative error number.
1442  *****************************************************************************/
1443 static int edge_chars_in_buffer(struct tty_struct *tty)
1444 {
1445         struct usb_serial_port *port = tty->driver_data;
1446         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1447         int num_chars;
1448         unsigned long flags;
1449
1450         dbg("%s", __func__);
1451
1452         if (edge_port == NULL)
1453                 return 0;
1454         if (edge_port->closePending)
1455                 return 0;
1456
1457         if (!edge_port->open) {
1458                 dbg("%s - port not opened", __func__);
1459                 return 0;
1460         }
1461
1462         spin_lock_irqsave(&edge_port->ep_lock, flags);
1463         num_chars = edge_port->maxTxCredits - edge_port->txCredits +
1464                                                 edge_port->txfifo.count;
1465         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1466         if (num_chars) {
1467                 dbg("%s(port %d) - returns %d", __func__,
1468                                                 port->number, num_chars);
1469         }
1470
1471         return num_chars;
1472 }
1473
1474
1475 /*****************************************************************************
1476  * SerialThrottle
1477  *      this function is called by the tty driver when it wants to stop the data
1478  *      being read from the port.
1479  *****************************************************************************/
1480 static void edge_throttle(struct tty_struct *tty)
1481 {
1482         struct usb_serial_port *port = tty->driver_data;
1483         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1484         int status;
1485
1486         dbg("%s - port %d", __func__, port->number);
1487
1488         if (edge_port == NULL)
1489                 return;
1490
1491         if (!edge_port->open) {
1492                 dbg("%s - port not opened", __func__);
1493                 return;
1494         }
1495
1496         /* if we are implementing XON/XOFF, send the stop character */
1497         if (I_IXOFF(tty)) {
1498                 unsigned char stop_char = STOP_CHAR(tty);
1499                 status = edge_write(tty, port, &stop_char, 1);
1500                 if (status <= 0)
1501                         return;
1502         }
1503
1504         /* if we are implementing RTS/CTS, toggle that line */
1505         if (tty->termios->c_cflag & CRTSCTS) {
1506                 edge_port->shadowMCR &= ~MCR_RTS;
1507                 status = send_cmd_write_uart_register(edge_port, MCR,
1508                                                         edge_port->shadowMCR);
1509                 if (status != 0)
1510                         return;
1511         }
1512
1513         return;
1514 }
1515
1516
1517 /*****************************************************************************
1518  * edge_unthrottle
1519  *      this function is called by the tty driver when it wants to resume the
1520  *      data being read from the port (called after SerialThrottle is called)
1521  *****************************************************************************/
1522 static void edge_unthrottle(struct tty_struct *tty)
1523 {
1524         struct usb_serial_port *port = tty->driver_data;
1525         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1526         int status;
1527
1528         dbg("%s - port %d", __func__, port->number);
1529
1530         if (edge_port == NULL)
1531                 return;
1532
1533         if (!edge_port->open) {
1534                 dbg("%s - port not opened", __func__);
1535                 return;
1536         }
1537
1538         /* if we are implementing XON/XOFF, send the start character */
1539         if (I_IXOFF(tty)) {
1540                 unsigned char start_char = START_CHAR(tty);
1541                 status = edge_write(tty, port, &start_char, 1);
1542                 if (status <= 0)
1543                         return;
1544         }
1545         /* if we are implementing RTS/CTS, toggle that line */
1546         if (tty->termios->c_cflag & CRTSCTS) {
1547                 edge_port->shadowMCR |= MCR_RTS;
1548                 send_cmd_write_uart_register(edge_port, MCR,
1549                                                 edge_port->shadowMCR);
1550         }
1551 }
1552
1553
1554 /*****************************************************************************
1555  * SerialSetTermios
1556  *      this function is called by the tty driver when it wants to change
1557  * the termios structure
1558  *****************************************************************************/
1559 static void edge_set_termios(struct tty_struct *tty,
1560         struct usb_serial_port *port, struct ktermios *old_termios)
1561 {
1562         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1563         unsigned int cflag;
1564
1565         cflag = tty->termios->c_cflag;
1566         dbg("%s - clfag %08x iflag %08x", __func__,
1567             tty->termios->c_cflag, tty->termios->c_iflag);
1568         dbg("%s - old clfag %08x old iflag %08x", __func__,
1569             old_termios->c_cflag, old_termios->c_iflag);
1570
1571         dbg("%s - port %d", __func__, port->number);
1572
1573         if (edge_port == NULL)
1574                 return;
1575
1576         if (!edge_port->open) {
1577                 dbg("%s - port not opened", __func__);
1578                 return;
1579         }
1580
1581         /* change the port settings to the new ones specified */
1582         change_port_settings(tty, edge_port, old_termios);
1583 }
1584
1585
1586 /*****************************************************************************
1587  * get_lsr_info - get line status register info
1588  *
1589  * Purpose: Let user call ioctl() to get info when the UART physically
1590  *          is emptied.  On bus types like RS485, the transmitter must
1591  *          release the bus after transmitting. This must be done when
1592  *          the transmit shift register is empty, not be done when the
1593  *          transmit holding register is empty.  This functionality
1594  *          allows an RS485 driver to be written in user space.
1595  *****************************************************************************/
1596 static int get_lsr_info(struct edgeport_port *edge_port,
1597                                                 unsigned int __user *value)
1598 {
1599         unsigned int result = 0;
1600         unsigned long flags;
1601
1602         spin_lock_irqsave(&edge_port->ep_lock, flags);
1603         if (edge_port->maxTxCredits == edge_port->txCredits &&
1604             edge_port->txfifo.count == 0) {
1605                 dbg("%s -- Empty", __func__);
1606                 result = TIOCSER_TEMT;
1607         }
1608         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1609
1610         if (copy_to_user(value, &result, sizeof(int)))
1611                 return -EFAULT;
1612         return 0;
1613 }
1614
1615 static int edge_tiocmset(struct tty_struct *tty, struct file *file,
1616                                         unsigned int set, unsigned int clear)
1617 {
1618         struct usb_serial_port *port = tty->driver_data;
1619         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1620         unsigned int mcr;
1621
1622         dbg("%s - port %d", __func__, port->number);
1623
1624         mcr = edge_port->shadowMCR;
1625         if (set & TIOCM_RTS)
1626                 mcr |= MCR_RTS;
1627         if (set & TIOCM_DTR)
1628                 mcr |= MCR_DTR;
1629         if (set & TIOCM_LOOP)
1630                 mcr |= MCR_LOOPBACK;
1631
1632         if (clear & TIOCM_RTS)
1633                 mcr &= ~MCR_RTS;
1634         if (clear & TIOCM_DTR)
1635                 mcr &= ~MCR_DTR;
1636         if (clear & TIOCM_LOOP)
1637                 mcr &= ~MCR_LOOPBACK;
1638
1639         edge_port->shadowMCR = mcr;
1640
1641         send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
1642
1643         return 0;
1644 }
1645
1646 static int edge_tiocmget(struct tty_struct *tty, struct file *file)
1647 {
1648         struct usb_serial_port *port = tty->driver_data;
1649         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1650         unsigned int result = 0;
1651         unsigned int msr;
1652         unsigned int mcr;
1653
1654         dbg("%s - port %d", __func__, port->number);
1655
1656         msr = edge_port->shadowMSR;
1657         mcr = edge_port->shadowMCR;
1658         result = ((mcr & MCR_DTR)       ? TIOCM_DTR: 0)   /* 0x002 */
1659                   | ((mcr & MCR_RTS)    ? TIOCM_RTS: 0)   /* 0x004 */
1660                   | ((msr & EDGEPORT_MSR_CTS)   ? TIOCM_CTS: 0)   /* 0x020 */
1661                   | ((msr & EDGEPORT_MSR_CD)    ? TIOCM_CAR: 0)   /* 0x040 */
1662                   | ((msr & EDGEPORT_MSR_RI)    ? TIOCM_RI:  0)   /* 0x080 */
1663                   | ((msr & EDGEPORT_MSR_DSR)   ? TIOCM_DSR: 0);  /* 0x100 */
1664
1665
1666         dbg("%s -- %x", __func__, result);
1667
1668         return result;
1669 }
1670
1671 static int get_serial_info(struct edgeport_port *edge_port,
1672                                 struct serial_struct __user *retinfo)
1673 {
1674         struct serial_struct tmp;
1675
1676         if (!retinfo)
1677                 return -EFAULT;
1678
1679         memset(&tmp, 0, sizeof(tmp));
1680
1681         tmp.type                = PORT_16550A;
1682         tmp.line                = edge_port->port->serial->minor;
1683         tmp.port                = edge_port->port->number;
1684         tmp.irq                 = 0;
1685         tmp.flags               = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
1686         tmp.xmit_fifo_size      = edge_port->maxTxCredits;
1687         tmp.baud_base           = 9600;
1688         tmp.close_delay         = 5*HZ;
1689         tmp.closing_wait        = 30*HZ;
1690
1691         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1692                 return -EFAULT;
1693         return 0;
1694 }
1695
1696
1697
1698 /*****************************************************************************
1699  * SerialIoctl
1700  *      this function handles any ioctl calls to the driver
1701  *****************************************************************************/
1702 static int edge_ioctl(struct tty_struct *tty, struct file *file,
1703                                         unsigned int cmd, unsigned long arg)
1704 {
1705         struct usb_serial_port *port = tty->driver_data;
1706         DEFINE_WAIT(wait);
1707         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1708         struct async_icount cnow;
1709         struct async_icount cprev;
1710         struct serial_icounter_struct icount;
1711
1712         dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
1713
1714         switch (cmd) {
1715         case TIOCSERGETLSR:
1716                 dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
1717                 return get_lsr_info(edge_port, (unsigned int __user *) arg);
1718
1719         case TIOCGSERIAL:
1720                 dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
1721                 return get_serial_info(edge_port, (struct serial_struct __user *) arg);
1722
1723         case TIOCMIWAIT:
1724                 dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
1725                 cprev = edge_port->icount;
1726                 while (1) {
1727                         prepare_to_wait(&edge_port->delta_msr_wait,
1728                                                 &wait, TASK_INTERRUPTIBLE);
1729                         schedule();
1730                         finish_wait(&edge_port->delta_msr_wait, &wait);
1731                         /* see if a signal did it */
1732                         if (signal_pending(current))
1733                                 return -ERESTARTSYS;
1734                         cnow = edge_port->icount;
1735                         if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
1736                             cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
1737                                 return -EIO; /* no change => error */
1738                         if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1739                             ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1740                             ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
1741                             ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
1742                                 return 0;
1743                         }
1744                         cprev = cnow;
1745                 }
1746                 /* NOTREACHED */
1747                 break;
1748
1749         case TIOCGICOUNT:
1750                 cnow = edge_port->icount;
1751                 memset(&icount, 0, sizeof(icount));
1752                 icount.cts = cnow.cts;
1753                 icount.dsr = cnow.dsr;
1754                 icount.rng = cnow.rng;
1755                 icount.dcd = cnow.dcd;
1756                 icount.rx = cnow.rx;
1757                 icount.tx = cnow.tx;
1758                 icount.frame = cnow.frame;
1759                 icount.overrun = cnow.overrun;
1760                 icount.parity = cnow.parity;
1761                 icount.brk = cnow.brk;
1762                 icount.buf_overrun = cnow.buf_overrun;
1763
1764                 dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
1765                                 __func__,  port->number, icount.rx, icount.tx);
1766                 if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
1767                         return -EFAULT;
1768                 return 0;
1769         }
1770         return -ENOIOCTLCMD;
1771 }
1772
1773
1774 /*****************************************************************************
1775  * SerialBreak
1776  *      this function sends a break to the port
1777  *****************************************************************************/
1778 static void edge_break(struct tty_struct *tty, int break_state)
1779 {
1780         struct usb_serial_port *port = tty->driver_data;
1781         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1782         struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
1783         int status;
1784
1785         if ((!edge_serial->is_epic) ||
1786             ((edge_serial->is_epic) &&
1787              (edge_serial->epic_descriptor.Supports.IOSPChase))) {
1788                 /* flush and chase */
1789                 edge_port->chaseResponsePending = true;
1790
1791                 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
1792                 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
1793                 if (status == 0) {
1794                         /* block until chase finished */
1795                         block_until_chase_response(edge_port);
1796                 } else {
1797                         edge_port->chaseResponsePending = false;
1798                 }
1799         }
1800
1801         if ((!edge_serial->is_epic) ||
1802             ((edge_serial->is_epic) &&
1803              (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
1804                 if (break_state == -1) {
1805                         dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__);
1806                         status = send_iosp_ext_cmd(edge_port,
1807                                                 IOSP_CMD_SET_BREAK, 0);
1808                 } else {
1809                         dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__);
1810                         status = send_iosp_ext_cmd(edge_port,
1811                                                 IOSP_CMD_CLEAR_BREAK, 0);
1812                 }
1813                 if (status)
1814                         dbg("%s - error sending break set/clear command.",
1815                                 __func__);
1816         }
1817
1818         return;
1819 }
1820
1821
1822 /*****************************************************************************
1823  * process_rcvd_data
1824  *      this function handles the data received on the bulk in pipe.
1825  *****************************************************************************/
1826 static void process_rcvd_data(struct edgeport_serial *edge_serial,
1827                                 unsigned char *buffer, __u16 bufferLength)
1828 {
1829         struct usb_serial_port *port;
1830         struct edgeport_port *edge_port;
1831         struct tty_struct *tty;
1832         __u16 lastBufferLength;
1833         __u16 rxLen;
1834
1835         dbg("%s", __func__);
1836
1837         lastBufferLength = bufferLength + 1;
1838
1839         while (bufferLength > 0) {
1840                 /* failsafe incase we get a message that we don't understand */
1841                 if (lastBufferLength == bufferLength) {
1842                         dbg("%s - stuck in loop, exiting it.", __func__);
1843                         break;
1844                 }
1845                 lastBufferLength = bufferLength;
1846
1847                 switch (edge_serial->rxState) {
1848                 case EXPECT_HDR1:
1849                         edge_serial->rxHeader1 = *buffer;
1850                         ++buffer;
1851                         --bufferLength;
1852
1853                         if (bufferLength == 0) {
1854                                 edge_serial->rxState = EXPECT_HDR2;
1855                                 break;
1856                         }
1857                         /* otherwise, drop on through */
1858                 case EXPECT_HDR2:
1859                         edge_serial->rxHeader2 = *buffer;
1860                         ++buffer;
1861                         --bufferLength;
1862
1863                         dbg("%s - Hdr1=%02X Hdr2=%02X", __func__,
1864                             edge_serial->rxHeader1, edge_serial->rxHeader2);
1865                         /* Process depending on whether this header is
1866                          * data or status */
1867
1868                         if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
1869                                 /* Decode this status header and go to
1870                                  * EXPECT_HDR1 (if we can process the status
1871                                  * with only 2 bytes), or go to EXPECT_HDR3 to
1872                                  * get the third byte. */
1873                                 edge_serial->rxPort =
1874                                     IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1875                                 edge_serial->rxStatusCode =
1876                                     IOSP_GET_STATUS_CODE(
1877                                                 edge_serial->rxHeader1);
1878
1879                                 if (!IOSP_STATUS_IS_2BYTE(
1880                                                 edge_serial->rxStatusCode)) {
1881                                         /* This status needs additional bytes.
1882                                          * Save what we have and then wait for
1883                                          * more data.
1884                                          */
1885                                         edge_serial->rxStatusParam
1886                                                 = edge_serial->rxHeader2;
1887                                         edge_serial->rxState = EXPECT_HDR3;
1888                                         break;
1889                                 }
1890                                 /* We have all the header bytes, process the
1891                                    status now */
1892                                 process_rcvd_status(edge_serial,
1893                                                 edge_serial->rxHeader2, 0);
1894                                 edge_serial->rxState = EXPECT_HDR1;
1895                                 break;
1896                         } else {
1897                                 edge_serial->rxPort =
1898                                     IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1899                                 edge_serial->rxBytesRemaining =
1900                                     IOSP_GET_HDR_DATA_LEN(
1901                                                 edge_serial->rxHeader1,
1902                                                 edge_serial->rxHeader2);
1903                                 dbg("%s - Data for Port %u Len %u",
1904                                                 __func__,
1905                                                 edge_serial->rxPort,
1906                                                 edge_serial->rxBytesRemaining);
1907
1908                                 /* ASSERT(DevExt->RxPort < DevExt->NumPorts);
1909                                  * ASSERT(DevExt->RxBytesRemaining <
1910                                  *              IOSP_MAX_DATA_LENGTH);
1911                                  */
1912
1913                                 if (bufferLength == 0) {
1914                                         edge_serial->rxState = EXPECT_DATA;
1915                                         break;
1916                                 }
1917                                 /* Else, drop through */
1918                         }
1919                 case EXPECT_DATA: /* Expect data */
1920                         if (bufferLength < edge_serial->rxBytesRemaining) {
1921                                 rxLen = bufferLength;
1922                                 /* Expect data to start next buffer */
1923                                 edge_serial->rxState = EXPECT_DATA;
1924                         } else {
1925                                 /* BufLen >= RxBytesRemaining */
1926                                 rxLen = edge_serial->rxBytesRemaining;
1927                                 /* Start another header next time */
1928                                 edge_serial->rxState = EXPECT_HDR1;
1929                         }
1930
1931                         bufferLength -= rxLen;
1932                         edge_serial->rxBytesRemaining -= rxLen;
1933
1934                         /* spit this data back into the tty driver if this
1935                            port is open */
1936                         if (rxLen) {
1937                                 port = edge_serial->serial->port[
1938                                                         edge_serial->rxPort];
1939                                 edge_port = usb_get_serial_port_data(port);
1940                                 if (edge_port->open) {
1941                                         tty = tty_port_tty_get(
1942                                                 &edge_port->port->port);
1943                                         if (tty) {
1944                                                 dbg("%s - Sending %d bytes to TTY for port %d",
1945                                                         __func__, rxLen, edge_serial->rxPort);
1946                                                 edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
1947                                                 tty_kref_put(tty);
1948                                         }
1949                                         edge_port->icount.rx += rxLen;
1950                                 }
1951                                 buffer += rxLen;
1952                         }
1953                         break;
1954
1955                 case EXPECT_HDR3:       /* Expect 3rd byte of status header */
1956                         edge_serial->rxHeader3 = *buffer;
1957                         ++buffer;
1958                         --bufferLength;
1959
1960                         /* We have all the header bytes, process the
1961                            status now */
1962                         process_rcvd_status(edge_serial,
1963                                 edge_serial->rxStatusParam,
1964                                 edge_serial->rxHeader3);
1965                         edge_serial->rxState = EXPECT_HDR1;
1966                         break;
1967                 }
1968         }
1969 }
1970
1971
1972 /*****************************************************************************
1973  * process_rcvd_status
1974  *      this function handles the any status messages received on the
1975  *      bulk in pipe.
1976  *****************************************************************************/
1977 static void process_rcvd_status(struct edgeport_serial *edge_serial,
1978                                                 __u8 byte2, __u8 byte3)
1979 {
1980         struct usb_serial_port *port;
1981         struct edgeport_port *edge_port;
1982         struct tty_struct *tty;
1983         __u8 code = edge_serial->rxStatusCode;
1984
1985         /* switch the port pointer to the one being currently talked about */
1986         port = edge_serial->serial->port[edge_serial->rxPort];
1987         edge_port = usb_get_serial_port_data(port);
1988         if (edge_port == NULL) {
1989                 dev_err(&edge_serial->serial->dev->dev,
1990                         "%s - edge_port == NULL for port %d\n",
1991                                         __func__, edge_serial->rxPort);
1992                 return;
1993         }
1994
1995         dbg("%s - port %d", __func__, edge_serial->rxPort);
1996
1997         if (code == IOSP_EXT_STATUS) {
1998                 switch (byte2) {
1999                 case IOSP_EXT_STATUS_CHASE_RSP:
2000                         /* we want to do EXT status regardless of port
2001                          * open/closed */
2002                         dbg("%s - Port %u EXT CHASE_RSP Data = %02x",
2003                                         __func__, edge_serial->rxPort, byte3);
2004                         /* Currently, the only EXT_STATUS is Chase, so process
2005                          * here instead of one more call to one more subroutine
2006                          * If/when more EXT_STATUS, there'll be more work to do
2007                          * Also, we currently clear flag and close the port
2008                          * regardless of content of above's Byte3.
2009                          * We could choose to do something else when Byte3 says
2010                          * Timeout on Chase from Edgeport, like wait longer in
2011                          * block_until_chase_response, but for now we don't.
2012                          */
2013                         edge_port->chaseResponsePending = false;
2014                         wake_up(&edge_port->wait_chase);
2015                         return;
2016
2017                 case IOSP_EXT_STATUS_RX_CHECK_RSP:
2018                         dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3);
2019                         /* Port->RxCheckRsp = true; */
2020                         return;
2021                 }
2022         }
2023
2024         if (code == IOSP_STATUS_OPEN_RSP) {
2025                 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
2026                 edge_port->maxTxCredits = edge_port->txCredits;
2027                 dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
2028                 handle_new_msr(edge_port, byte2);
2029
2030                 /* send the current line settings to the port so we are
2031                    in sync with any further termios calls */
2032                 tty = tty_port_tty_get(&edge_port->port->port);
2033                 if (tty) {
2034                         change_port_settings(tty,
2035                                 edge_port, tty->termios);
2036                         tty_kref_put(tty);
2037                 }
2038
2039                 /* we have completed the open */
2040                 edge_port->openPending = false;
2041                 edge_port->open = true;
2042                 wake_up(&edge_port->wait_open);
2043                 return;
2044         }
2045
2046         /* If port is closed, silently discard all rcvd status. We can
2047          * have cases where buffered status is received AFTER the close
2048          * port command is sent to the Edgeport.
2049          */
2050         if (!edge_port->open || edge_port->closePending)
2051                 return;
2052
2053         switch (code) {
2054         /* Not currently sent by Edgeport */
2055         case IOSP_STATUS_LSR:
2056                 dbg("%s - Port %u LSR Status = %02x",
2057                                         __func__, edge_serial->rxPort, byte2);
2058                 handle_new_lsr(edge_port, false, byte2, 0);
2059                 break;
2060
2061         case IOSP_STATUS_LSR_DATA:
2062                 dbg("%s - Port %u LSR Status = %02x, Data = %02x",
2063                                 __func__, edge_serial->rxPort, byte2, byte3);
2064                 /* byte2 is LSR Register */
2065                 /* byte3 is broken data byte */
2066                 handle_new_lsr(edge_port, true, byte2, byte3);
2067                 break;
2068         /*
2069          *      case IOSP_EXT_4_STATUS:
2070          *              dbg("%s - Port %u LSR Status = %02x Data = %02x",
2071          *                      __func__, edge_serial->rxPort, byte2, byte3);
2072          *              break;
2073          */
2074         case IOSP_STATUS_MSR:
2075                 dbg("%s - Port %u MSR Status = %02x",
2076                                         __func__, edge_serial->rxPort, byte2);
2077                 /*
2078                  * Process this new modem status and generate appropriate
2079                  * events, etc, based on the new status. This routine
2080                  * also saves the MSR in Port->ShadowMsr.
2081                  */
2082                 handle_new_msr(edge_port, byte2);
2083                 break;
2084
2085         default:
2086                 dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
2087                 break;
2088         }
2089         return;
2090 }
2091
2092
2093 /*****************************************************************************
2094  * edge_tty_recv
2095  *      this function passes data on to the tty flip buffer
2096  *****************************************************************************/
2097 static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
2098                                         unsigned char *data, int length)
2099 {
2100         int cnt;
2101
2102         do {
2103                 cnt = tty_buffer_request_room(tty, length);
2104                 if (cnt < length) {
2105                         dev_err(dev, "%s - dropping data, %d bytes lost\n",
2106                                         __func__, length - cnt);
2107                         if (cnt == 0)
2108                                 break;
2109                 }
2110                 tty_insert_flip_string(tty, data, cnt);
2111                 data += cnt;
2112                 length -= cnt;
2113         } while (length > 0);
2114
2115         tty_flip_buffer_push(tty);
2116 }
2117
2118
2119 /*****************************************************************************
2120  * handle_new_msr
2121  *      this function handles any change to the msr register for a port.
2122  *****************************************************************************/
2123 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
2124 {
2125         struct  async_icount *icount;
2126
2127         dbg("%s %02x", __func__, newMsr);
2128
2129         if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
2130                         EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
2131                 icount = &edge_port->icount;
2132
2133                 /* update input line counters */
2134                 if (newMsr & EDGEPORT_MSR_DELTA_CTS)
2135                         icount->cts++;
2136                 if (newMsr & EDGEPORT_MSR_DELTA_DSR)
2137                         icount->dsr++;
2138                 if (newMsr & EDGEPORT_MSR_DELTA_CD)
2139                         icount->dcd++;
2140                 if (newMsr & EDGEPORT_MSR_DELTA_RI)
2141                         icount->rng++;
2142                 wake_up_interruptible(&edge_port->delta_msr_wait);
2143         }
2144
2145         /* Save the new modem status */
2146         edge_port->shadowMSR = newMsr & 0xf0;
2147
2148         return;
2149 }
2150
2151
2152 /*****************************************************************************
2153  * handle_new_lsr
2154  *      this function handles any change to the lsr register for a port.
2155  *****************************************************************************/
2156 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
2157                                                         __u8 lsr, __u8 data)
2158 {
2159         __u8 newLsr = (__u8) (lsr & (__u8)
2160                 (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
2161         struct async_icount *icount;
2162
2163         dbg("%s - %02x", __func__, newLsr);
2164
2165         edge_port->shadowLSR = lsr;
2166
2167         if (newLsr & LSR_BREAK) {
2168                 /*
2169                  * Parity and Framing errors only count if they
2170                  * occur exclusive of a break being
2171                  * received.
2172                  */
2173                 newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
2174         }
2175
2176         /* Place LSR data byte into Rx buffer */
2177         if (lsrData) {
2178                 struct tty_struct *tty =
2179                                 tty_port_tty_get(&edge_port->port->port);
2180                 if (tty) {
2181                         edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
2182                         tty_kref_put(tty);
2183                 }
2184         }
2185         /* update input line counters */
2186         icount = &edge_port->icount;
2187         if (newLsr & LSR_BREAK)
2188                 icount->brk++;
2189         if (newLsr & LSR_OVER_ERR)
2190                 icount->overrun++;
2191         if (newLsr & LSR_PAR_ERR)
2192                 icount->parity++;
2193         if (newLsr & LSR_FRM_ERR)
2194                 icount->frame++;
2195
2196         return;
2197 }
2198
2199
2200 /****************************************************************************
2201  * sram_write
2202  *      writes a number of bytes to the Edgeport device's sram starting at the
2203  *      given address.
2204  *      If successful returns the number of bytes written, otherwise it returns
2205  *      a negative error number of the problem.
2206  ****************************************************************************/
2207 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
2208                                         __u16 length, const __u8 *data)
2209 {
2210         int result;
2211         __u16 current_length;
2212         unsigned char *transfer_buffer;
2213
2214         dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
2215
2216         transfer_buffer =  kmalloc(64, GFP_KERNEL);
2217         if (!transfer_buffer) {
2218                 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
2219                                                         __func__, 64);
2220                 return -ENOMEM;
2221         }
2222
2223         /* need to split these writes up into 64 byte chunks */
2224         result = 0;
2225         while (length > 0) {
2226                 if (length > 64)
2227                         current_length = 64;
2228                 else
2229                         current_length = length;
2230
2231 /*              dbg("%s - writing %x, %x, %d", __func__,
2232                                         extAddr, addr, current_length); */
2233                 memcpy(transfer_buffer, data, current_length);
2234                 result = usb_control_msg(serial->dev,
2235                                         usb_sndctrlpipe(serial->dev, 0),
2236                                         USB_REQUEST_ION_WRITE_RAM,
2237                                         0x40, addr, extAddr, transfer_buffer,
2238                                         current_length, 300);
2239                 if (result < 0)
2240                         break;
2241                 length -= current_length;
2242                 addr += current_length;
2243                 data += current_length;
2244         }
2245
2246         kfree(transfer_buffer);
2247         return result;
2248 }
2249
2250
2251 /****************************************************************************
2252  * rom_write
2253  *      writes a number of bytes to the Edgeport device's ROM starting at the
2254  *      given address.
2255  *      If successful returns the number of bytes written, otherwise it returns
2256  *      a negative error number of the problem.
2257  ****************************************************************************/
2258 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
2259                                         __u16 length, const __u8 *data)
2260 {
2261         int result;
2262         __u16 current_length;
2263         unsigned char *transfer_buffer;
2264
2265 /*      dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */
2266
2267         transfer_buffer =  kmalloc(64, GFP_KERNEL);
2268         if (!transfer_buffer) {
2269                 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
2270                                                                 __func__, 64);
2271                 return -ENOMEM;
2272         }
2273
2274         /* need to split these writes up into 64 byte chunks */
2275         result = 0;
2276         while (length > 0) {
2277                 if (length > 64)
2278                         current_length = 64;
2279                 else
2280                         current_length = length;
2281 /*              dbg("%s - writing %x, %x, %d", __func__,
2282                                         extAddr, addr, current_length); */
2283                 memcpy(transfer_buffer, data, current_length);
2284                 result = usb_control_msg(serial->dev,
2285                                         usb_sndctrlpipe(serial->dev, 0),
2286                                         USB_REQUEST_ION_WRITE_ROM, 0x40,
2287                                         addr, extAddr,
2288                                         transfer_buffer, current_length, 300);
2289                 if (result < 0)
2290                         break;
2291                 length -= current_length;
2292                 addr += current_length;
2293                 data += current_length;
2294         }
2295
2296         kfree(transfer_buffer);
2297         return result;
2298 }
2299
2300
2301 /****************************************************************************
2302  * rom_read
2303  *      reads a number of bytes from the Edgeport device starting at the given
2304  *      address.
2305  *      If successful returns the number of bytes read, otherwise it returns
2306  *      a negative error number of the problem.
2307  ****************************************************************************/
2308 static int rom_read(struct usb_serial *serial, __u16 extAddr,
2309                                         __u16 addr, __u16 length, __u8 *data)
2310 {
2311         int result;
2312         __u16 current_length;
2313         unsigned char *transfer_buffer;
2314
2315         dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
2316
2317         transfer_buffer =  kmalloc(64, GFP_KERNEL);
2318         if (!transfer_buffer) {
2319                 dev_err(&serial->dev->dev,
2320                         "%s - kmalloc(%d) failed.\n", __func__, 64);
2321                 return -ENOMEM;
2322         }
2323
2324         /* need to split these reads up into 64 byte chunks */
2325         result = 0;
2326         while (length > 0) {
2327                 if (length > 64)
2328                         current_length = 64;
2329                 else
2330                         current_length = length;
2331 /*              dbg("%s - %x, %x, %d", __func__,
2332                                 extAddr, addr, current_length); */
2333                 result = usb_control_msg(serial->dev,
2334                                         usb_rcvctrlpipe(serial->dev, 0),
2335                                         USB_REQUEST_ION_READ_ROM,
2336                                         0xC0, addr, extAddr, transfer_buffer,
2337                                         current_length, 300);
2338                 if (result < 0)
2339                         break;
2340                 memcpy(data, transfer_buffer, current_length);
2341                 length -= current_length;
2342                 addr += current_length;
2343                 data += current_length;
2344         }
2345
2346         kfree(transfer_buffer);
2347         return result;
2348 }
2349
2350
2351 /****************************************************************************
2352  * send_iosp_ext_cmd
2353  *      Is used to send a IOSP message to the Edgeport device
2354  ****************************************************************************/
2355 static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
2356                                                 __u8 command, __u8 param)
2357 {
2358         unsigned char   *buffer;
2359         unsigned char   *currentCommand;
2360         int             length = 0;
2361         int             status = 0;
2362
2363         dbg("%s - %d, %d", __func__, command, param);
2364
2365         buffer = kmalloc(10, GFP_ATOMIC);
2366         if (!buffer) {
2367                 dev_err(&edge_port->port->dev,
2368                                 "%s - kmalloc(%d) failed.\n", __func__, 10);
2369                 return -ENOMEM;
2370         }
2371
2372         currentCommand = buffer;
2373
2374         MAKE_CMD_EXT_CMD(&currentCommand, &length,
2375                 edge_port->port->number - edge_port->port->serial->minor,
2376                 command, param);
2377
2378         status = write_cmd_usb(edge_port, buffer, length);
2379         if (status) {
2380                 /* something bad happened, let's free up the memory */
2381                 kfree(buffer);
2382         }
2383
2384         return status;
2385 }
2386
2387
2388 /*****************************************************************************
2389  * write_cmd_usb
2390  *      this function writes the given buffer out to the bulk write endpoint.
2391  *****************************************************************************/
2392 static int write_cmd_usb(struct edgeport_port *edge_port,
2393                                         unsigned char *buffer, int length)
2394 {
2395         struct edgeport_serial *edge_serial =
2396                                 usb_get_serial_data(edge_port->port->serial);
2397         int status = 0;
2398         struct urb *urb;
2399         int timeout;
2400
2401         usb_serial_debug_data(debug, &edge_port->port->dev,
2402                                                 __func__, length, buffer);
2403
2404         /* Allocate our next urb */
2405         urb = usb_alloc_urb(0, GFP_ATOMIC);
2406         if (!urb)
2407                 return -ENOMEM;
2408
2409         atomic_inc(&CmdUrbs);
2410         dbg("%s - ALLOCATE URB %p (outstanding %d)",
2411                                 __func__, urb, atomic_read(&CmdUrbs));
2412
2413         usb_fill_bulk_urb(urb, edge_serial->serial->dev,
2414                         usb_sndbulkpipe(edge_serial->serial->dev,
2415                                         edge_serial->bulk_out_endpoint),
2416                         buffer, length, edge_bulk_out_cmd_callback, edge_port);
2417
2418         edge_port->commandPending = true;
2419         status = usb_submit_urb(urb, GFP_ATOMIC);
2420
2421         if (status) {
2422                 /* something went wrong */
2423                 dev_err(&edge_port->port->dev,
2424                     "%s - usb_submit_urb(write command) failed, status = %d\n",
2425                                                         __func__, status);
2426                 usb_kill_urb(urb);
2427                 usb_free_urb(urb);
2428                 atomic_dec(&CmdUrbs);
2429                 return status;
2430         }
2431
2432         /* wait for command to finish */
2433         timeout = COMMAND_TIMEOUT;
2434 #if 0
2435         wait_event(&edge_port->wait_command, !edge_port->commandPending);
2436
2437         if (edge_port->commandPending) {
2438                 /* command timed out */
2439                 dbg("%s - command timed out", __func__);
2440                 status = -EINVAL;
2441         }
2442 #endif
2443         return status;
2444 }
2445
2446
2447 /*****************************************************************************
2448  * send_cmd_write_baud_rate
2449  *      this function sends the proper command to change the baud rate of the
2450  *      specified port.
2451  *****************************************************************************/
2452 static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
2453                                                                 int baudRate)
2454 {
2455         struct edgeport_serial *edge_serial =
2456                                 usb_get_serial_data(edge_port->port->serial);
2457         unsigned char *cmdBuffer;
2458         unsigned char *currCmd;
2459         int cmdLen = 0;
2460         int divisor;
2461         int status;
2462         unsigned char number =
2463                 edge_port->port->number - edge_port->port->serial->minor;
2464
2465         if (edge_serial->is_epic &&
2466             !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
2467                 dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d",
2468                     edge_port->port->number, baudRate);
2469                 return 0;
2470         }
2471
2472         dbg("%s - port = %d, baud = %d", __func__,
2473                                         edge_port->port->number, baudRate);
2474
2475         status = calc_baud_rate_divisor(baudRate, &divisor);
2476         if (status) {
2477                 dev_err(&edge_port->port->dev, "%s - bad baud rate\n",
2478                                                                 __func__);
2479                 return status;
2480         }
2481
2482         /* Alloc memory for the string of commands. */
2483         cmdBuffer =  kmalloc(0x100, GFP_ATOMIC);
2484         if (!cmdBuffer) {
2485                 dev_err(&edge_port->port->dev,
2486                         "%s - kmalloc(%d) failed.\n", __func__, 0x100);
2487                 return -ENOMEM;
2488         }
2489         currCmd = cmdBuffer;
2490
2491         /* Enable access to divisor latch */
2492         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE);
2493
2494         /* Write the divisor itself */
2495         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor));
2496         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor));
2497
2498         /* Restore original value to disable access to divisor latch */
2499         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR,
2500                                                 edge_port->shadowLCR);
2501
2502         status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
2503         if (status) {
2504                 /* something bad happened, let's free up the memory */
2505                 kfree(cmdBuffer);
2506         }
2507
2508         return status;
2509 }
2510
2511
2512 /*****************************************************************************
2513  * calc_baud_rate_divisor
2514  *      this function calculates the proper baud rate divisor for the specified
2515  *      baud rate.
2516  *****************************************************************************/
2517 static int calc_baud_rate_divisor(int baudrate, int *divisor)
2518 {
2519         int i;
2520         __u16 custom;
2521
2522
2523         dbg("%s - %d", __func__, baudrate);
2524
2525         for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
2526                 if (divisor_table[i].BaudRate == baudrate) {
2527                         *divisor = divisor_table[i].Divisor;
2528                         return 0;
2529                 }
2530         }
2531
2532         /* We have tried all of the standard baud rates
2533          * lets try to calculate the divisor for this baud rate
2534          * Make sure the baud rate is reasonable */
2535         if (baudrate > 50 && baudrate < 230400) {
2536                 /* get divisor */
2537                 custom = (__u16)((230400L + baudrate/2) / baudrate);
2538
2539                 *divisor = custom;
2540
2541                 dbg("%s - Baud %d = %d\n", __func__, baudrate, custom);
2542                 return 0;
2543         }
2544
2545         return -1;
2546 }
2547
2548
2549 /*****************************************************************************
2550  * send_cmd_write_uart_register
2551  *  this function builds up a uart register message and sends to to the device.
2552  *****************************************************************************/
2553 static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
2554                                                 __u8 regNum, __u8 regValue)
2555 {
2556         struct edgeport_serial *edge_serial =
2557                                 usb_get_serial_data(edge_port->port->serial);
2558         unsigned char *cmdBuffer;
2559         unsigned char *currCmd;
2560         unsigned long cmdLen = 0;
2561         int status;
2562
2563         dbg("%s - write to %s register 0x%02x",
2564                         (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
2565
2566         if (edge_serial->is_epic &&
2567             !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
2568             regNum == MCR) {
2569                 dbg("SendCmdWriteUartReg - Not writing to MCR Register");
2570                 return 0;
2571         }
2572
2573         if (edge_serial->is_epic &&
2574             !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
2575             regNum == LCR) {
2576                 dbg("SendCmdWriteUartReg - Not writing to LCR Register");
2577                 return 0;
2578         }
2579
2580         /* Alloc memory for the string of commands. */
2581         cmdBuffer = kmalloc(0x10, GFP_ATOMIC);
2582         if (cmdBuffer == NULL)
2583                 return -ENOMEM;
2584
2585         currCmd = cmdBuffer;
2586
2587         /* Build a cmd in the buffer to write the given register */
2588         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen,
2589                 edge_port->port->number - edge_port->port->serial->minor,
2590                 regNum, regValue);
2591
2592         status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
2593         if (status) {
2594                 /* something bad happened, let's free up the memory */
2595                 kfree(cmdBuffer);
2596         }
2597
2598         return status;
2599 }
2600
2601
2602 /*****************************************************************************
2603  * change_port_settings
2604  *      This routine is called to set the UART on the device to match the
2605  *      specified new settings.
2606  *****************************************************************************/
2607
2608 static void change_port_settings(struct tty_struct *tty,
2609         struct edgeport_port *edge_port, struct ktermios *old_termios)
2610 {
2611         struct edgeport_serial *edge_serial =
2612                         usb_get_serial_data(edge_port->port->serial);
2613         int baud;
2614         unsigned cflag;
2615         __u8 mask = 0xff;
2616         __u8 lData;
2617         __u8 lParity;
2618         __u8 lStop;
2619         __u8 rxFlow;
2620         __u8 txFlow;
2621         int status;
2622
2623         dbg("%s - port %d", __func__, edge_port->port->number);
2624
2625         if (!edge_port->open &&
2626             !edge_port->openPending) {
2627                 dbg("%s - port not opened", __func__);
2628                 return;
2629         }
2630
2631         cflag = tty->termios->c_cflag;
2632
2633         switch (cflag & CSIZE) {
2634         case CS5:
2635                 lData = LCR_BITS_5; mask = 0x1f;
2636                 dbg("%s - data bits = 5", __func__);
2637                 break;
2638         case CS6:
2639                 lData = LCR_BITS_6; mask = 0x3f;
2640                 dbg("%s - data bits = 6", __func__);
2641                 break;
2642         case CS7:
2643                 lData = LCR_BITS_7; mask = 0x7f;
2644                 dbg("%s - data bits = 7", __func__);
2645                 break;
2646         default:
2647         case CS8:
2648                 lData = LCR_BITS_8;
2649                 dbg("%s - data bits = 8", __func__);
2650                 break;
2651         }
2652
2653         lParity = LCR_PAR_NONE;
2654         if (cflag & PARENB) {
2655                 if (cflag & CMSPAR) {
2656                         if (cflag & PARODD) {
2657                                 lParity = LCR_PAR_MARK;
2658                                 dbg("%s - parity = mark", __func__);
2659                         } else {
2660                                 lParity = LCR_PAR_SPACE;
2661                                 dbg("%s - parity = space", __func__);
2662                         }
2663                 } else if (cflag & PARODD) {
2664                         lParity = LCR_PAR_ODD;
2665                         dbg("%s - parity = odd", __func__);
2666                 } else {
2667                         lParity = LCR_PAR_EVEN;
2668                         dbg("%s - parity = even", __func__);
2669                 }
2670         } else {
2671                 dbg("%s - parity = none", __func__);
2672         }
2673
2674         if (cflag & CSTOPB) {
2675                 lStop = LCR_STOP_2;
2676                 dbg("%s - stop bits = 2", __func__);
2677         } else {
2678                 lStop = LCR_STOP_1;
2679                 dbg("%s - stop bits = 1", __func__);
2680         }
2681
2682         /* figure out the flow control settings */
2683         rxFlow = txFlow = 0x00;
2684         if (cflag & CRTSCTS) {
2685                 rxFlow |= IOSP_RX_FLOW_RTS;
2686                 txFlow |= IOSP_TX_FLOW_CTS;
2687                 dbg("%s - RTS/CTS is enabled", __func__);
2688         } else {
2689                 dbg("%s - RTS/CTS is disabled", __func__);
2690         }
2691
2692         /* if we are implementing XON/XOFF, set the start and stop character
2693            in the device */
2694         if (I_IXOFF(tty) || I_IXON(tty)) {
2695                 unsigned char stop_char  = STOP_CHAR(tty);
2696                 unsigned char start_char = START_CHAR(tty);
2697
2698                 if ((!edge_serial->is_epic) ||
2699                     ((edge_serial->is_epic) &&
2700                      (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
2701                         send_iosp_ext_cmd(edge_port,
2702                                         IOSP_CMD_SET_XON_CHAR, start_char);
2703                         send_iosp_ext_cmd(edge_port,
2704                                         IOSP_CMD_SET_XOFF_CHAR, stop_char);
2705                 }
2706
2707                 /* if we are implementing INBOUND XON/XOFF */
2708                 if (I_IXOFF(tty)) {
2709                         rxFlow |= IOSP_RX_FLOW_XON_XOFF;
2710                         dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
2711                                         __func__, start_char, stop_char);
2712                 } else {
2713                         dbg("%s - INBOUND XON/XOFF is disabled", __func__);
2714                 }
2715
2716                 /* if we are implementing OUTBOUND XON/XOFF */
2717                 if (I_IXON(tty)) {
2718                         txFlow |= IOSP_TX_FLOW_XON_XOFF;
2719                         dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
2720                                         __func__, start_char, stop_char);
2721                 } else {
2722                         dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
2723                 }
2724         }
2725
2726         /* Set flow control to the configured value */
2727         if ((!edge_serial->is_epic) ||
2728             ((edge_serial->is_epic) &&
2729              (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)))
2730                 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
2731         if ((!edge_serial->is_epic) ||
2732             ((edge_serial->is_epic) &&
2733              (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)))
2734                 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
2735
2736
2737         edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
2738         edge_port->shadowLCR |= (lData | lParity | lStop);
2739
2740         edge_port->validDataMask = mask;
2741
2742         /* Send the updated LCR value to the EdgePort */
2743         status = send_cmd_write_uart_register(edge_port, LCR,
2744                                                         edge_port->shadowLCR);
2745         if (status != 0)
2746                 return;
2747
2748         /* set up the MCR register and send it to the EdgePort */
2749         edge_port->shadowMCR = MCR_MASTER_IE;
2750         if (cflag & CBAUD)
2751                 edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
2752
2753         status = send_cmd_write_uart_register(edge_port, MCR,
2754                                                 edge_port->shadowMCR);
2755         if (status != 0)
2756                 return;
2757
2758         /* Determine divisor based on baud rate */
2759         baud = tty_get_baud_rate(tty);
2760         if (!baud) {
2761                 /* pick a default, any default... */
2762                 baud = 9600;
2763         }
2764
2765         dbg("%s - baud rate = %d", __func__, baud);
2766         status = send_cmd_write_baud_rate(edge_port, baud);
2767         if (status == -1) {
2768                 /* Speed change was not possible - put back the old speed */
2769                 baud = tty_termios_baud_rate(old_termios);
2770                 tty_encode_baud_rate(tty, baud, baud);
2771         }
2772         return;
2773 }
2774
2775
2776 /****************************************************************************
2777  * unicode_to_ascii
2778  *      Turns a string from Unicode into ASCII.
2779  *      Doesn't do a good job with any characters that are outside the normal
2780  *      ASCII range, but it's only for debugging...
2781  *      NOTE: expects the unicode in LE format
2782  ****************************************************************************/
2783 static void unicode_to_ascii(char *string, int buflen,
2784                                         __le16 *unicode, int unicode_size)
2785 {
2786         int i;
2787
2788         if (buflen <= 0)        /* never happens, but... */
2789                 return;
2790         --buflen;               /* space for nul */
2791
2792         for (i = 0; i < unicode_size; i++) {
2793                 if (i >= buflen)
2794                         break;
2795                 string[i] = (char)(le16_to_cpu(unicode[i]));
2796         }
2797         string[i] = 0x00;
2798 }
2799
2800
2801 /****************************************************************************
2802  * get_manufacturing_desc
2803  *      reads in the manufacturing descriptor and stores it into the serial
2804  *      structure.
2805  ****************************************************************************/
2806 static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
2807 {
2808         int response;
2809
2810         dbg("getting manufacturer descriptor");
2811
2812         response = rom_read(edge_serial->serial,
2813                                 (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
2814                                 (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff),
2815                                 EDGE_MANUF_DESC_LEN,
2816                                 (__u8 *)(&edge_serial->manuf_descriptor));
2817
2818         if (response < 1)
2819                 dev_err(&edge_serial->serial->dev->dev,
2820                         "error in getting manufacturer descriptor\n");
2821         else {
2822                 char string[30];
2823                 dbg("**Manufacturer Descriptor");
2824                 dbg("  RomSize:        %dK",
2825                         edge_serial->manuf_descriptor.RomSize);
2826                 dbg("  RamSize:        %dK",
2827                         edge_serial->manuf_descriptor.RamSize);
2828                 dbg("  CpuRev:         %d",
2829                         edge_serial->manuf_descriptor.CpuRev);
2830                 dbg("  BoardRev:       %d",
2831                         edge_serial->manuf_descriptor.BoardRev);
2832                 dbg("  NumPorts:       %d",
2833                         edge_serial->manuf_descriptor.NumPorts);
2834                 dbg("  DescDate:       %d/%d/%d",
2835                         edge_serial->manuf_descriptor.DescDate[0],
2836                         edge_serial->manuf_descriptor.DescDate[1],
2837                         edge_serial->manuf_descriptor.DescDate[2]+1900);
2838                 unicode_to_ascii(string, sizeof(string),
2839                         edge_serial->manuf_descriptor.SerialNumber,
2840                         edge_serial->manuf_descriptor.SerNumLength/2);
2841                 dbg("  SerialNumber: %s", string);
2842                 unicode_to_ascii(string, sizeof(string),
2843                         edge_serial->manuf_descriptor.AssemblyNumber,
2844                         edge_serial->manuf_descriptor.AssemblyNumLength/2);
2845                 dbg("  AssemblyNumber: %s", string);
2846                 unicode_to_ascii(string, sizeof(string),
2847                     edge_serial->manuf_descriptor.OemAssyNumber,
2848                     edge_serial->manuf_descriptor.OemAssyNumLength/2);
2849                 dbg("  OemAssyNumber:  %s", string);
2850                 dbg("  UartType:       %d",
2851                         edge_serial->manuf_descriptor.UartType);
2852                 dbg("  IonPid:         %d",
2853                         edge_serial->manuf_descriptor.IonPid);
2854                 dbg("  IonConfig:      %d",
2855                         edge_serial->manuf_descriptor.IonConfig);
2856         }
2857 }
2858
2859
2860 /****************************************************************************
2861  * get_boot_desc
2862  *      reads in the bootloader descriptor and stores it into the serial
2863  *      structure.
2864  ****************************************************************************/
2865 static void get_boot_desc(struct edgeport_serial *edge_serial)
2866 {
2867         int response;
2868
2869         dbg("getting boot descriptor");
2870
2871         response = rom_read(edge_serial->serial,
2872                                 (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
2873                                 (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff),
2874                                 EDGE_BOOT_DESC_LEN,
2875                                 (__u8 *)(&edge_serial->boot_descriptor));
2876
2877         if (response < 1)
2878                 dev_err(&edge_serial->serial->dev->dev,
2879                                 "error in getting boot descriptor\n");
2880         else {
2881                 dbg("**Boot Descriptor:");
2882                 dbg("  BootCodeLength: %d",
2883                     le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
2884                 dbg("  MajorVersion:   %d",
2885                         edge_serial->boot_descriptor.MajorVersion);
2886                 dbg("  MinorVersion:   %d",
2887                         edge_serial->boot_descriptor.MinorVersion);
2888                 dbg("  BuildNumber:    %d",
2889                         le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
2890                 dbg("  Capabilities:   0x%x",
2891                       le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
2892                 dbg("  UConfig0:       %d",
2893                         edge_serial->boot_descriptor.UConfig0);
2894                 dbg("  UConfig1:       %d",
2895                         edge_serial->boot_descriptor.UConfig1);
2896         }
2897 }
2898
2899
2900 /****************************************************************************
2901  * load_application_firmware
2902  *      This is called to load the application firmware to the device
2903  ****************************************************************************/
2904 static void load_application_firmware(struct edgeport_serial *edge_serial)
2905 {
2906         const struct ihex_binrec *rec;
2907         const struct firmware *fw;
2908         const char *fw_name;
2909         const char *fw_info;
2910         int response;
2911         __u32 Operaddr;
2912         __u16 build;
2913
2914         switch (edge_serial->product_info.iDownloadFile) {
2915                 case EDGE_DOWNLOAD_FILE_I930:
2916                         fw_info = "downloading firmware version (930)";
2917                         fw_name = "edgeport/down.fw";
2918                         break;
2919
2920                 case EDGE_DOWNLOAD_FILE_80251:
2921                         fw_info = "downloading firmware version (80251)";
2922                         fw_name = "edgeport/down2.fw";
2923                         break;
2924
2925                 case EDGE_DOWNLOAD_FILE_NONE:
2926                         dbg     ("No download file specified, skipping download\n");
2927                         return;
2928
2929                 default:
2930                         return;
2931         }
2932
2933         response = request_ihex_firmware(&fw, fw_name,
2934                                     &edge_serial->serial->dev->dev);
2935         if (response) {
2936                 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
2937                        fw_name, response);
2938                 return;
2939         }
2940
2941         rec = (const struct ihex_binrec *)fw->data;
2942         build = (rec->data[2] << 8) | rec->data[3];
2943
2944         dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
2945
2946         edge_serial->product_info.FirmwareMajorVersion = fw->data[0];
2947         edge_serial->product_info.FirmwareMinorVersion = fw->data[1];
2948         edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
2949
2950         for (rec = ihex_next_binrec(rec); rec;
2951              rec = ihex_next_binrec(rec)) {
2952                 Operaddr = be32_to_cpu(rec->addr);
2953                 response = sram_write(edge_serial->serial,
2954                                      Operaddr >> 16,
2955                                      Operaddr & 0xFFFF,
2956                                      be16_to_cpu(rec->len),
2957                                      &rec->data[0]);
2958                 if (response < 0) {
2959                         dev_err(&edge_serial->serial->dev->dev,
2960                                 "sram_write failed (%x, %x, %d)\n",
2961                                 Operaddr >> 16, Operaddr & 0xFFFF,
2962                                 be16_to_cpu(rec->len));
2963                         break;
2964                 }
2965         }
2966
2967         dbg("sending exec_dl_code");
2968         response = usb_control_msg (edge_serial->serial->dev,
2969                                     usb_sndctrlpipe(edge_serial->serial->dev, 0),
2970                                     USB_REQUEST_ION_EXEC_DL_CODE,
2971                                     0x40, 0x4000, 0x0001, NULL, 0, 3000);
2972
2973         release_firmware(fw);
2974         return;
2975 }
2976
2977
2978 /****************************************************************************
2979  * edge_startup
2980  ****************************************************************************/
2981 static int edge_startup(struct usb_serial *serial)
2982 {
2983         struct edgeport_serial *edge_serial;
2984         struct edgeport_port *edge_port;
2985         struct usb_device *dev;
2986         int i, j;
2987         int response;
2988         bool interrupt_in_found;
2989         bool bulk_in_found;
2990         bool bulk_out_found;
2991         static __u32 descriptor[3] = {  EDGE_COMPATIBILITY_MASK0,
2992                                         EDGE_COMPATIBILITY_MASK1,
2993                                         EDGE_COMPATIBILITY_MASK2 };
2994
2995         dev = serial->dev;
2996
2997         /* create our private serial structure */
2998         edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
2999         if (edge_serial == NULL) {
3000                 dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
3001                 return -ENOMEM;
3002         }
3003         spin_lock_init(&edge_serial->es_lock);
3004         edge_serial->serial = serial;
3005         usb_set_serial_data(serial, edge_serial);
3006
3007         /* get the name for the device from the device */
3008         i = get_string(dev, dev->descriptor.iManufacturer,
3009             &edge_serial->name[0], MAX_NAME_LEN+1);
3010         edge_serial->name[i++] = ' ';
3011         get_string(dev, dev->descriptor.iProduct,
3012             &edge_serial->name[i], MAX_NAME_LEN+2 - i);
3013
3014         dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
3015
3016         /* Read the epic descriptor */
3017         if (get_epic_descriptor(edge_serial) <= 0) {
3018                 /* memcpy descriptor to Supports structures */
3019                 memcpy(&edge_serial->epic_descriptor.Supports, descriptor,
3020                        sizeof(struct edge_compatibility_bits));
3021
3022                 /* get the manufacturing descriptor for this device */
3023                 get_manufacturing_desc(edge_serial);
3024
3025                 /* get the boot descriptor */
3026                 get_boot_desc(edge_serial);
3027
3028                 get_product_info(edge_serial);
3029         }
3030
3031         /* set the number of ports from the manufacturing description */
3032         /* serial->num_ports = serial->product_info.NumPorts; */
3033         if ((!edge_serial->is_epic) &&
3034             (edge_serial->product_info.NumPorts != serial->num_ports)) {
3035                 dev_warn(&serial->dev->dev, "Device Reported %d serial ports "
3036                          "vs. core thinking we have %d ports, email "
3037                          "greg@kroah.com this information.\n",
3038                          edge_serial->product_info.NumPorts,
3039                          serial->num_ports);
3040         }
3041
3042         dbg("%s - time 1 %ld", __func__, jiffies);
3043
3044         /* If not an EPiC device */
3045         if (!edge_serial->is_epic) {
3046                 /* now load the application firmware into this device */
3047                 load_application_firmware(edge_serial);
3048
3049                 dbg("%s - time 2 %ld", __func__, jiffies);
3050
3051                 /* Check current Edgeport EEPROM and update if necessary */
3052                 update_edgeport_E2PROM(edge_serial);
3053
3054                 dbg("%s - time 3 %ld", __func__, jiffies);
3055
3056                 /* set the configuration to use #1 */
3057 /*              dbg("set_configuration 1"); */
3058 /*              usb_set_configuration (dev, 1); */
3059         }
3060         dbg("  FirmwareMajorVersion  %d.%d.%d",
3061             edge_serial->product_info.FirmwareMajorVersion,
3062             edge_serial->product_info.FirmwareMinorVersion,
3063             le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber));
3064
3065         /* we set up the pointers to the endpoints in the edge_open function,
3066          * as the structures aren't created yet. */
3067
3068         /* set up our port private structures */
3069         for (i = 0; i < serial->num_ports; ++i) {
3070                 edge_port = kmalloc(sizeof(struct edgeport_port), GFP_KERNEL);
3071                 if (edge_port == NULL) {
3072                         dev_err(&serial->dev->dev, "%s - Out of memory\n",
3073                                                                    __func__);
3074                         for (j = 0; j < i; ++j) {
3075                                 kfree(usb_get_serial_port_data(serial->port[j]));
3076                                 usb_set_serial_port_data(serial->port[j],
3077                                                                         NULL);
3078                         }
3079                         usb_set_serial_data(serial, NULL);
3080                         kfree(edge_serial);
3081                         return -ENOMEM;
3082                 }
3083                 memset(edge_port, 0, sizeof(struct edgeport_port));
3084                 spin_lock_init(&edge_port->ep_lock);
3085                 edge_port->port = serial->port[i];
3086                 usb_set_serial_port_data(serial->port[i], edge_port);
3087         }
3088
3089         response = 0;
3090
3091         if (edge_serial->is_epic) {
3092                 /* EPIC thing, set up our interrupt polling now and our read
3093                  * urb, so that the device knows it really is connected. */
3094                 interrupt_in_found = bulk_in_found = bulk_out_found = false;
3095                 for (i = 0; i < serial->interface->altsetting[0]
3096                                                 .desc.bNumEndpoints; ++i) {
3097                         struct usb_endpoint_descriptor *endpoint;
3098                         int buffer_size;
3099
3100                         endpoint = &serial->interface->altsetting[0].
3101                                                         endpoint[i].desc;
3102                         buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
3103                         if (!interrupt_in_found &&
3104                             (usb_endpoint_is_int_in(endpoint))) {
3105                                 /* we found a interrupt in endpoint */
3106                                 dbg("found interrupt in");
3107
3108                                 /* not set up yet, so do it now */
3109                                 edge_serial->interrupt_read_urb =
3110                                                 usb_alloc_urb(0, GFP_KERNEL);
3111                                 if (!edge_serial->interrupt_read_urb) {
3112                                         err("out of memory");
3113                                         return -ENOMEM;
3114                                 }
3115                                 edge_serial->interrupt_in_buffer =
3116                                         kmalloc(buffer_size, GFP_KERNEL);
3117                                 if (!edge_serial->interrupt_in_buffer) {
3118                                         err("out of memory");
3119                                         usb_free_urb(edge_serial->interrupt_read_urb);
3120                                         return -ENOMEM;
3121                                 }
3122                                 edge_serial->interrupt_in_endpoint =
3123                                                 endpoint->bEndpointAddress;
3124
3125                                 /* set up our interrupt urb */
3126                                 usb_fill_int_urb(
3127                                         edge_serial->interrupt_read_urb,
3128                                         dev,
3129                                         usb_rcvintpipe(dev,
3130                                                 endpoint->bEndpointAddress),
3131                                         edge_serial->interrupt_in_buffer,
3132                                         buffer_size,
3133                                         edge_interrupt_callback,
3134                                         edge_serial,
3135                                         endpoint->bInterval);
3136
3137                                 interrupt_in_found = true;
3138                         }
3139
3140                         if (!bulk_in_found &&
3141                                 (usb_endpoint_is_bulk_in(endpoint))) {
3142                                 /* we found a bulk in endpoint */
3143                                 dbg("found bulk in");
3144
3145                                 /* not set up yet, so do it now */
3146                                 edge_serial->read_urb =
3147                                                 usb_alloc_urb(0, GFP_KERNEL);
3148                                 if (!edge_serial->read_urb) {
3149                                         err("out of memory");
3150                                         return -ENOMEM;
3151                                 }
3152                                 edge_serial->bulk_in_buffer =
3153                                         kmalloc(buffer_size, GFP_KERNEL);
3154                                 if (!edge_serial->bulk_in_buffer) {
3155                                         err("out of memory");
3156                                         usb_free_urb(edge_serial->read_urb);
3157                                         return -ENOMEM;
3158                                 }
3159                                 edge_serial->bulk_in_endpoint =
3160                                                 endpoint->bEndpointAddress;
3161
3162                                 /* set up our bulk in urb */
3163                                 usb_fill_bulk_urb(edge_serial->read_urb, dev,
3164                                         usb_rcvbulkpipe(dev,
3165                                                 endpoint->bEndpointAddress),
3166                                         edge_serial->bulk_in_buffer,
3167                                         le16_to_cpu(endpoint->wMaxPacketSize),
3168                                         edge_bulk_in_callback,
3169                                         edge_serial);
3170                                 bulk_in_found = true;
3171                         }
3172
3173                         if (!bulk_out_found &&
3174                             (usb_endpoint_is_bulk_out(endpoint))) {
3175                                 /* we found a bulk out endpoint */
3176                                 dbg("found bulk out");
3177                                 edge_serial->bulk_out_endpoint =
3178                                                 endpoint->bEndpointAddress;
3179                                 bulk_out_found = true;
3180                         }
3181                 }
3182
3183                 if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
3184                         err("Error - the proper endpoints were not found!");
3185                         return -ENODEV;
3186                 }
3187
3188                 /* start interrupt read for this edgeport this interrupt will
3189                  * continue as long as the edgeport is connected */
3190                 response = usb_submit_urb(edge_serial->interrupt_read_urb,
3191                                                                 GFP_KERNEL);
3192                 if (response)
3193                         err("%s - Error %d submitting control urb",
3194                                                         __func__, response);
3195         }
3196         return response;
3197 }
3198
3199
3200 /****************************************************************************
3201  * edge_shutdown
3202  *      This function is called whenever the device is removed from the usb bus.
3203  ****************************************************************************/
3204 static void edge_shutdown(struct usb_serial *serial)
3205 {
3206         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
3207         int i;
3208
3209         dbg("%s", __func__);
3210
3211         /* stop reads and writes on all ports */
3212         for (i = 0; i < serial->num_ports; ++i) {
3213                 kfree(usb_get_serial_port_data(serial->port[i]));
3214                 usb_set_serial_port_data(serial->port[i],  NULL);
3215         }
3216         /* free up our endpoint stuff */
3217         if (edge_serial->is_epic) {
3218                 usb_kill_urb(edge_serial->interrupt_read_urb);
3219                 usb_free_urb(edge_serial->interrupt_read_urb);
3220                 kfree(edge_serial->interrupt_in_buffer);
3221
3222                 usb_kill_urb(edge_serial->read_urb);
3223                 usb_free_urb(edge_serial->read_urb);
3224                 kfree(edge_serial->bulk_in_buffer);
3225         }
3226
3227         kfree(edge_serial);
3228         usb_set_serial_data(serial, NULL);
3229 }
3230
3231
3232 /****************************************************************************
3233  * edgeport_init
3234  *      This is called by the module subsystem, or on startup to initialize us
3235  ****************************************************************************/
3236 static int __init edgeport_init(void)
3237 {
3238         int retval;
3239
3240         retval = usb_serial_register(&edgeport_2port_device);
3241         if (retval)
3242                 goto failed_2port_device_register;
3243         retval = usb_serial_register(&edgeport_4port_device);
3244         if (retval)
3245                 goto failed_4port_device_register;
3246         retval = usb_serial_register(&edgeport_8port_device);
3247         if (retval)
3248                 goto failed_8port_device_register;
3249         retval = usb_serial_register(&epic_device);
3250         if (retval)
3251                 goto failed_epic_device_register;
3252         retval = usb_register(&io_driver);
3253         if (retval)
3254                 goto failed_usb_register;
3255         atomic_set(&CmdUrbs, 0);
3256         info(DRIVER_DESC " " DRIVER_VERSION);
3257         return 0;
3258
3259 failed_usb_register:
3260         usb_serial_deregister(&epic_device);
3261 failed_epic_device_register:
3262         usb_serial_deregister(&edgeport_8port_device);
3263 failed_8port_device_register:
3264         usb_serial_deregister(&edgeport_4port_device);
3265 failed_4port_device_register:
3266         usb_serial_deregister(&edgeport_2port_device);
3267 failed_2port_device_register:
3268         return retval;
3269 }
3270
3271
3272 /****************************************************************************
3273  * edgeport_exit
3274  *      Called when the driver is about to be unloaded.
3275  ****************************************************************************/
3276 static void __exit edgeport_exit (void)
3277 {
3278         usb_deregister(&io_driver);
3279         usb_serial_deregister(&edgeport_2port_device);
3280         usb_serial_deregister(&edgeport_4port_device);
3281         usb_serial_deregister(&edgeport_8port_device);
3282         usb_serial_deregister(&epic_device);
3283 }
3284
3285 module_init(edgeport_init);
3286 module_exit(edgeport_exit);
3287
3288 /* Module information */
3289 MODULE_AUTHOR(DRIVER_AUTHOR);
3290 MODULE_DESCRIPTION(DRIVER_DESC);
3291 MODULE_LICENSE("GPL");
3292 MODULE_FIRMWARE("edgeport/boot.fw");
3293 MODULE_FIRMWARE("edgeport/boot2.fw");
3294 MODULE_FIRMWARE("edgeport/down.fw");
3295 MODULE_FIRMWARE("edgeport/down2.fw");
3296
3297 module_param(debug, bool, S_IRUGO | S_IWUSR);
3298 MODULE_PARM_DESC(debug, "Debug enabled or not");
3299
3300 module_param(low_latency, bool, S_IRUGO | S_IWUSR);
3301 MODULE_PARM_DESC(low_latency, "Low latency enabled or not");