git.oblomov.eu Git - linux-2.6/blob - drivers/net/enc28j60.c

   1 /*
   2  * Microchip ENC28J60 ethernet driver (MAC + PHY)
   3  *
   4  * Copyright (C) 2007 Eurek srl
   5  * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
   6  * based on enc28j60.c written by David Anders for 2.4 kernel version
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/kernel.h>
  18 #include <linux/types.h>
  19 #include <linux/fcntl.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/slab.h>
  22 #include <linux/string.h>
  23 #include <linux/errno.h>
  24 #include <linux/init.h>
  25 #include <linux/netdevice.h>
  26 #include <linux/etherdevice.h>
  27 #include <linux/ethtool.h>
  28 #include <linux/tcp.h>
  29 #include <linux/skbuff.h>
  30 #include <linux/delay.h>
  31 #include <linux/spi/spi.h>
  32
  33 #include "enc28j60_hw.h"
  34
  35 #define DRV_NAME        "enc28j60"
  36 #define DRV_VERSION     "1.01"
  37
  38 #define SPI_OPLEN       1
  39
  40 #define ENC28J60_MSG_DEFAULT    \
  41         (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
  42
  43 /* Buffer size required for the largest SPI transfer (i.e., reading a
  44  * frame). */
  45 #define SPI_TRANSFER_BUF_LEN    (4 + MAX_FRAMELEN)
  46
  47 #define TX_TIMEOUT      (4 * HZ)
  48
  49 /* Max TX retries in case of collision as suggested by errata datasheet */
  50 #define MAX_TX_RETRYCOUNT       16
  51
  52 enum {
  53         RXFILTER_NORMAL,
  54         RXFILTER_MULTI,
  55         RXFILTER_PROMISC
  56 };
  57
  58 /* Driver local data */
  59 struct enc28j60_net {
  60         struct net_device *netdev;
  61         struct spi_device *spi;
  62         struct mutex lock;
  63         struct sk_buff *tx_skb;
  64         struct work_struct tx_work;
  65         struct work_struct irq_work;
  66         struct work_struct setrx_work;
  67         struct work_struct restart_work;
  68         u8 bank;                /* current register bank selected */
  69         u16 next_pk_ptr;        /* next packet pointer within FIFO */
  70         u16 max_pk_counter;     /* statistics: max packet counter */
  71         u16 tx_retry_count;
  72         bool hw_enable;
  73         bool full_duplex;
  74         int rxfilter;
  75         u32 msg_enable;
  76         u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
  77 };
  78
  79 /* use ethtool to change the level for any given device */
  80 static struct {
  81         u32 msg_enable;
  82 } debug = { -1 };
  83
  84 /*
  85  * SPI read buffer
  86  * wait for the SPI transfer and copy received data to destination
  87  */
  88 static int
  89 spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
  90 {
  91         u8 *rx_buf = priv->spi_transfer_buf + 4;
  92         u8 *tx_buf = priv->spi_transfer_buf;
  93         struct spi_transfer t = {
  94                 .tx_buf = tx_buf,
  95                 .rx_buf = rx_buf,
  96                 .len = SPI_OPLEN + len,
  97         };
  98         struct spi_message msg;
  99         int ret;
 100
 101         tx_buf[0] = ENC28J60_READ_BUF_MEM;
 102         tx_buf[1] = tx_buf[2] = tx_buf[3] = 0;  /* don't care */
 103
 104         spi_message_init(&msg);
 105         spi_message_add_tail(&t, &msg);
 106         ret = spi_sync(priv->spi, &msg);
 107         if (ret == 0) {
 108                 memcpy(data, &rx_buf[SPI_OPLEN], len);
 109                 ret = msg.status;
 110         }
 111         if (ret && netif_msg_drv(priv))
 112                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 113                         __func__, ret);
 114
 115         return ret;
 116 }
 117
 118 /*
 119  * SPI write buffer
 120  */
 121 static int spi_write_buf(struct enc28j60_net *priv, int len,
 122                          const u8 *data)
 123 {
 124         int ret;
 125
 126         if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
 127                 ret = -EINVAL;
 128         else {
 129                 priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
 130                 memcpy(&priv->spi_transfer_buf[1], data, len);
 131                 ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
 132                 if (ret && netif_msg_drv(priv))
 133                         printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 134                                 __func__, ret);
 135         }
 136         return ret;
 137 }
 138
 139 /*
 140  * basic SPI read operation
 141  */
 142 static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
 143                            u8 addr)
 144 {
 145         u8 tx_buf[2];
 146         u8 rx_buf[4];
 147         u8 val = 0;
 148         int ret;
 149         int slen = SPI_OPLEN;
 150
 151         /* do dummy read if needed */
 152         if (addr & SPRD_MASK)
 153                 slen++;
 154
 155         tx_buf[0] = op | (addr & ADDR_MASK);
 156         ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
 157         if (ret)
 158                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 159                         __func__, ret);
 160         else
 161                 val = rx_buf[slen - 1];
 162
 163         return val;
 164 }
 165
 166 /*
 167  * basic SPI write operation
 168  */
 169 static int spi_write_op(struct enc28j60_net *priv, u8 op,
 170                         u8 addr, u8 val)
 171 {
 172         int ret;
 173
 174         priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
 175         priv->spi_transfer_buf[1] = val;
 176         ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
 177         if (ret && netif_msg_drv(priv))
 178                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 179                         __func__, ret);
 180         return ret;
 181 }
 182
 183 static void enc28j60_soft_reset(struct enc28j60_net *priv)
 184 {
 185         if (netif_msg_hw(priv))
 186                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
 187
 188         spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
 189         /* Errata workaround #1, CLKRDY check is unreliable,
 190          * delay at least 1 mS instead */
 191         udelay(2000);
 192 }
 193
 194 /*
 195  * select the current register bank if necessary
 196  */
 197 static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
 198 {
 199         if ((addr & BANK_MASK) != priv->bank) {
 200                 u8 b = (addr & BANK_MASK) >> 5;
 201
 202                 if (b != (ECON1_BSEL1 | ECON1_BSEL0))
 203                         spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
 204                                      ECON1_BSEL1 | ECON1_BSEL0);
 205                 if (b != 0)
 206                         spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1, b);
 207                 priv->bank = (addr & BANK_MASK);
 208         }
 209 }
 210
 211 /*
 212  * Register access routines through the SPI bus.
 213  * Every register access comes in two flavours:
 214  * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
 215  *   atomically more than one register
 216  * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
 217  *
 218  * Some registers can be accessed through the bit field clear and
 219  * bit field set to avoid a read modify write cycle.
 220  */
 221
 222 /*
 223  * Register bit field Set
 224  */
 225 static void nolock_reg_bfset(struct enc28j60_net *priv,
 226                                       u8 addr, u8 mask)
 227 {
 228         enc28j60_set_bank(priv, addr);
 229         spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
 230 }
 231
 232 static void locked_reg_bfset(struct enc28j60_net *priv,
 233                                       u8 addr, u8 mask)
 234 {
 235         mutex_lock(&priv->lock);
 236         nolock_reg_bfset(priv, addr, mask);
 237         mutex_unlock(&priv->lock);
 238 }
 239
 240 /*
 241  * Register bit field Clear
 242  */
 243 static void nolock_reg_bfclr(struct enc28j60_net *priv,
 244                                       u8 addr, u8 mask)
 245 {
 246         enc28j60_set_bank(priv, addr);
 247         spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
 248 }
 249
 250 static void locked_reg_bfclr(struct enc28j60_net *priv,
 251                                       u8 addr, u8 mask)
 252 {
 253         mutex_lock(&priv->lock);
 254         nolock_reg_bfclr(priv, addr, mask);
 255         mutex_unlock(&priv->lock);
 256 }
 257
 258 /*
 259  * Register byte read
 260  */
 261 static int nolock_regb_read(struct enc28j60_net *priv,
 262                                      u8 address)
 263 {
 264         enc28j60_set_bank(priv, address);
 265         return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
 266 }
 267
 268 static int locked_regb_read(struct enc28j60_net *priv,
 269                                      u8 address)
 270 {
 271         int ret;
 272
 273         mutex_lock(&priv->lock);
 274         ret = nolock_regb_read(priv, address);
 275         mutex_unlock(&priv->lock);
 276
 277         return ret;
 278 }
 279
 280 /*
 281  * Register word read
 282  */
 283 static int nolock_regw_read(struct enc28j60_net *priv,
 284                                      u8 address)
 285 {
 286         int rl, rh;
 287
 288         enc28j60_set_bank(priv, address);
 289         rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
 290         rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
 291
 292         return (rh << 8) | rl;
 293 }
 294
 295 static int locked_regw_read(struct enc28j60_net *priv,
 296                                      u8 address)
 297 {
 298         int ret;
 299
 300         mutex_lock(&priv->lock);
 301         ret = nolock_regw_read(priv, address);
 302         mutex_unlock(&priv->lock);
 303
 304         return ret;
 305 }
 306
 307 /*
 308  * Register byte write
 309  */
 310 static void nolock_regb_write(struct enc28j60_net *priv,
 311                                        u8 address, u8 data)
 312 {
 313         enc28j60_set_bank(priv, address);
 314         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
 315 }
 316
 317 static void locked_regb_write(struct enc28j60_net *priv,
 318                                        u8 address, u8 data)
 319 {
 320         mutex_lock(&priv->lock);
 321         nolock_regb_write(priv, address, data);
 322         mutex_unlock(&priv->lock);
 323 }
 324
 325 /*
 326  * Register word write
 327  */
 328 static void nolock_regw_write(struct enc28j60_net *priv,
 329                                        u8 address, u16 data)
 330 {
 331         enc28j60_set_bank(priv, address);
 332         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
 333         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
 334                      (u8) (data >> 8));
 335 }
 336
 337 static void locked_regw_write(struct enc28j60_net *priv,
 338                                        u8 address, u16 data)
 339 {
 340         mutex_lock(&priv->lock);
 341         nolock_regw_write(priv, address, data);
 342         mutex_unlock(&priv->lock);
 343 }
 344
 345 /*
 346  * Buffer memory read
 347  * Select the starting address and execute a SPI buffer read
 348  */
 349 static void enc28j60_mem_read(struct enc28j60_net *priv,
 350                                      u16 addr, int len, u8 *data)
 351 {
 352         mutex_lock(&priv->lock);
 353         nolock_regw_write(priv, ERDPTL, addr);
 354 #ifdef CONFIG_ENC28J60_WRITEVERIFY
 355         if (netif_msg_drv(priv)) {
 356                 u16 reg;
 357                 reg = nolock_regw_read(priv, ERDPTL);
 358                 if (reg != addr)
 359                         printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
 360                                 "(0x%04x - 0x%04x)\n", __func__, reg, addr);
 361         }
 362 #endif
 363         spi_read_buf(priv, len, data);
 364         mutex_unlock(&priv->lock);
 365 }
 366
 367 /*
 368  * Write packet to enc28j60 TX buffer memory
 369  */
 370 static void
 371 enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
 372 {
 373         mutex_lock(&priv->lock);
 374         /* Set the write pointer to start of transmit buffer area */
 375         nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
 376 #ifdef CONFIG_ENC28J60_WRITEVERIFY
 377         if (netif_msg_drv(priv)) {
 378                 u16 reg;
 379                 reg = nolock_regw_read(priv, EWRPTL);
 380                 if (reg != TXSTART_INIT)
 381                         printk(KERN_DEBUG DRV_NAME
 382                                 ": %s() ERWPT:0x%04x != 0x%04x\n",
 383                                 __func__, reg, TXSTART_INIT);
 384         }
 385 #endif
 386         /* Set the TXND pointer to correspond to the packet size given */
 387         nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
 388         /* write per-packet control byte */
 389         spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
 390         if (netif_msg_hw(priv))
 391                 printk(KERN_DEBUG DRV_NAME
 392                         ": %s() after control byte ERWPT:0x%04x\n",
 393                         __func__, nolock_regw_read(priv, EWRPTL));
 394         /* copy the packet into the transmit buffer */
 395         spi_write_buf(priv, len, data);
 396         if (netif_msg_hw(priv))
 397                 printk(KERN_DEBUG DRV_NAME
 398                          ": %s() after write packet ERWPT:0x%04x, len=%d\n",
 399                          __func__, nolock_regw_read(priv, EWRPTL), len);
 400         mutex_unlock(&priv->lock);
 401 }
 402
 403 static unsigned long msec20_to_jiffies;
 404
 405 static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
 406 {
 407         unsigned long timeout = jiffies + msec20_to_jiffies;
 408
 409         /* 20 msec timeout read */
 410         while ((nolock_regb_read(priv, reg) & mask) != val) {
 411                 if (time_after(jiffies, timeout)) {
 412                         if (netif_msg_drv(priv))
 413                                 dev_dbg(&priv->spi->dev,
 414                                         "reg %02x ready timeout!\n", reg);
 415                         return -ETIMEDOUT;
 416                 }
 417                 cpu_relax();
 418         }
 419         return 0;
 420 }
 421
 422 /*
 423  * Wait until the PHY operation is complete.
 424  */
 425 static int wait_phy_ready(struct enc28j60_net *priv)
 426 {
 427         return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
 428 }
 429
 430 /*
 431  * PHY register read
 432  * PHY registers are not accessed directly, but through the MII
 433  */
 434 static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
 435 {
 436         u16 ret;
 437
 438         mutex_lock(&priv->lock);
 439         /* set the PHY register address */
 440         nolock_regb_write(priv, MIREGADR, address);
 441         /* start the register read operation */
 442         nolock_regb_write(priv, MICMD, MICMD_MIIRD);
 443         /* wait until the PHY read completes */
 444         wait_phy_ready(priv);
 445         /* quit reading */
 446         nolock_regb_write(priv, MICMD, 0x00);
 447         /* return the data */
 448         ret  = nolock_regw_read(priv, MIRDL);
 449         mutex_unlock(&priv->lock);
 450
 451         return ret;
 452 }
 453
 454 static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
 455 {
 456         int ret;
 457
 458         mutex_lock(&priv->lock);
 459         /* set the PHY register address */
 460         nolock_regb_write(priv, MIREGADR, address);
 461         /* write the PHY data */
 462         nolock_regw_write(priv, MIWRL, data);
 463         /* wait until the PHY write completes and return */
 464         ret = wait_phy_ready(priv);
 465         mutex_unlock(&priv->lock);
 466
 467         return ret;
 468 }
 469
 470 /*
 471  * Program the hardware MAC address from dev->dev_addr.
 472  */
 473 static int enc28j60_set_hw_macaddr(struct net_device *ndev)
 474 {
 475         int ret;
 476         struct enc28j60_net *priv = netdev_priv(ndev);
 477
 478         mutex_lock(&priv->lock);
 479         if (!priv->hw_enable) {
 480                 if (netif_msg_drv(priv)) {
 481                         DECLARE_MAC_BUF(mac);
 482                         printk(KERN_INFO DRV_NAME
 483                                 ": %s: Setting MAC address to %s\n",
 484                                 ndev->name, print_mac(mac, ndev->dev_addr));
 485                 }
 486                 /* NOTE: MAC address in ENC28J60 is byte-backward */
 487                 nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
 488                 nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
 489                 nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
 490                 nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
 491                 nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
 492                 nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
 493                 ret = 0;
 494         } else {
 495                 if (netif_msg_drv(priv))
 496                         printk(KERN_DEBUG DRV_NAME
 497                                 ": %s() Hardware must be disabled to set "
 498                                 "Mac address\n", __func__);
 499                 ret = -EBUSY;
 500         }
 501         mutex_unlock(&priv->lock);
 502         return ret;
 503 }
 504
 505 /*
 506  * Store the new hardware address in dev->dev_addr, and update the MAC.
 507  */
 508 static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
 509 {
 510         struct sockaddr *address = addr;
 511
 512         if (netif_running(dev))
 513                 return -EBUSY;
 514         if (!is_valid_ether_addr(address->sa_data))
 515                 return -EADDRNOTAVAIL;
 516
 517         memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
 518         return enc28j60_set_hw_macaddr(dev);
 519 }
 520
 521 /*
 522  * Debug routine to dump useful register contents
 523  */
 524 static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
 525 {
 526         mutex_lock(&priv->lock);
 527         printk(KERN_DEBUG DRV_NAME " %s\n"
 528                 "HwRevID: 0x%02x\n"
 529                 "Cntrl: ECON1 ECON2 ESTAT  EIR  EIE\n"
 530                 "       0x%02x  0x%02x  0x%02x  0x%02x  0x%02x\n"
 531                 "MAC  : MACON1 MACON3 MACON4\n"
 532                 "       0x%02x   0x%02x   0x%02x\n"
 533                 "Rx   : ERXST  ERXND  ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
 534                 "       0x%04x 0x%04x 0x%04x  0x%04x  "
 535                 "0x%02x    0x%02x    0x%04x\n"
 536                 "Tx   : ETXST  ETXND  MACLCON1 MACLCON2 MAPHSUP\n"
 537                 "       0x%04x 0x%04x 0x%02x     0x%02x     0x%02x\n",
 538                 msg, nolock_regb_read(priv, EREVID),
 539                 nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
 540                 nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
 541                 nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
 542                 nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
 543                 nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
 544                 nolock_regw_read(priv, ERXWRPTL),
 545                 nolock_regw_read(priv, ERXRDPTL),
 546                 nolock_regb_read(priv, ERXFCON),
 547                 nolock_regb_read(priv, EPKTCNT),
 548                 nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
 549                 nolock_regw_read(priv, ETXNDL),
 550                 nolock_regb_read(priv, MACLCON1),
 551                 nolock_regb_read(priv, MACLCON2),
 552                 nolock_regb_read(priv, MAPHSUP));
 553         mutex_unlock(&priv->lock);
 554 }
 555
 556 /*
 557  * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
 558  */
 559 static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
 560 {
 561         u16 erxrdpt;
 562
 563         if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
 564                 erxrdpt = end;
 565         else
 566                 erxrdpt = next_packet_ptr - 1;
 567
 568         return erxrdpt;
 569 }
 570
 571 static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
 572 {
 573         u16 erxrdpt;
 574
 575         if (start > 0x1FFF || end > 0x1FFF || start > end) {
 576                 if (netif_msg_drv(priv))
 577                         printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
 578                                 "bad parameters!\n", __func__, start, end);
 579                 return;
 580         }
 581         /* set receive buffer start + end */
 582         priv->next_pk_ptr = start;
 583         nolock_regw_write(priv, ERXSTL, start);
 584         erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
 585         nolock_regw_write(priv, ERXRDPTL, erxrdpt);
 586         nolock_regw_write(priv, ERXNDL, end);
 587 }
 588
 589 static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
 590 {
 591         if (start > 0x1FFF || end > 0x1FFF || start > end) {
 592                 if (netif_msg_drv(priv))
 593                         printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
 594                                 "bad parameters!\n", __func__, start, end);
 595                 return;
 596         }
 597         /* set transmit buffer start + end */
 598         nolock_regw_write(priv, ETXSTL, start);
 599         nolock_regw_write(priv, ETXNDL, end);
 600 }
 601
 602 /*
 603  * Low power mode shrinks power consumption about 100x, so we'd like
 604  * the chip to be in that mode whenever it's inactive.  (However, we
 605  * can't stay in lowpower mode during suspend with WOL active.)
 606  */
 607 static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
 608 {
 609         if (netif_msg_drv(priv))
 610                 dev_dbg(&priv->spi->dev, "%s power...\n",
 611                                 is_low ? "low" : "high");
 612
 613         mutex_lock(&priv->lock);
 614         if (is_low) {
 615                 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
 616                 poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
 617                 poll_ready(priv, ECON1, ECON1_TXRTS, 0);
 618                 /* ECON2_VRPS was set during initialization */
 619                 nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
 620         } else {
 621                 nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
 622                 poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
 623                 /* caller sets ECON1_RXEN */
 624         }
 625         mutex_unlock(&priv->lock);
 626 }
 627
 628 static int enc28j60_hw_init(struct enc28j60_net *priv)
 629 {
 630         u8 reg;
 631
 632         if (netif_msg_drv(priv))
 633                 printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
 634                         priv->full_duplex ? "FullDuplex" : "HalfDuplex");
 635
 636         mutex_lock(&priv->lock);
 637         /* first reset the chip */
 638         enc28j60_soft_reset(priv);
 639         /* Clear ECON1 */
 640         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
 641         priv->bank = 0;
 642         priv->hw_enable = false;
 643         priv->tx_retry_count = 0;
 644         priv->max_pk_counter = 0;
 645         priv->rxfilter = RXFILTER_NORMAL;
 646         /* enable address auto increment and voltage regulator powersave */
 647         nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
 648
 649         nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
 650         nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
 651         mutex_unlock(&priv->lock);
 652
 653         /*
 654          * Check the RevID.
 655          * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
 656          * damaged
 657          */
 658         reg = locked_regb_read(priv, EREVID);
 659         if (netif_msg_drv(priv))
 660                 printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);
 661         if (reg == 0x00 || reg == 0xff) {
 662                 if (netif_msg_drv(priv))
 663                         printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
 664                                 __func__, reg);
 665                 return 0;
 666         }
 667
 668         /* default filter mode: (unicast OR broadcast) AND crc valid */
 669         locked_regb_write(priv, ERXFCON,
 670                             ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
 671
 672         /* enable MAC receive */
 673         locked_regb_write(priv, MACON1,
 674                             MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
 675         /* enable automatic padding and CRC operations */
 676         if (priv->full_duplex) {
 677                 locked_regb_write(priv, MACON3,
 678                                     MACON3_PADCFG0 | MACON3_TXCRCEN |
 679                                     MACON3_FRMLNEN | MACON3_FULDPX);
 680                 /* set inter-frame gap (non-back-to-back) */
 681                 locked_regb_write(priv, MAIPGL, 0x12);
 682                 /* set inter-frame gap (back-to-back) */
 683                 locked_regb_write(priv, MABBIPG, 0x15);
 684         } else {
 685                 locked_regb_write(priv, MACON3,
 686                                     MACON3_PADCFG0 | MACON3_TXCRCEN |
 687                                     MACON3_FRMLNEN);
 688                 locked_regb_write(priv, MACON4, 1 << 6);        /* DEFER bit */
 689                 /* set inter-frame gap (non-back-to-back) */
 690                 locked_regw_write(priv, MAIPGL, 0x0C12);
 691                 /* set inter-frame gap (back-to-back) */
 692                 locked_regb_write(priv, MABBIPG, 0x12);
 693         }
 694         /*
 695          * MACLCON1 (default)
 696          * MACLCON2 (default)
 697          * Set the maximum packet size which the controller will accept
 698          */
 699         locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
 700
 701         /* Configure LEDs */
 702         if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
 703                 return 0;
 704
 705         if (priv->full_duplex) {
 706                 if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
 707                         return 0;
 708                 if (!enc28j60_phy_write(priv, PHCON2, 0x00))
 709                         return 0;
 710         } else {
 711                 if (!enc28j60_phy_write(priv, PHCON1, 0x00))
 712                         return 0;
 713                 if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
 714                         return 0;
 715         }
 716         if (netif_msg_hw(priv))
 717                 enc28j60_dump_regs(priv, "Hw initialized.");
 718
 719         return 1;
 720 }
 721
 722 static void enc28j60_hw_enable(struct enc28j60_net *priv)
 723 {
 724         /* enable interrupts */
 725         if (netif_msg_hw(priv))
 726                 printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
 727                         __func__);
 728
 729         enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
 730
 731         mutex_lock(&priv->lock);
 732         nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
 733                          EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
 734         nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
 735                           EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
 736
 737         /* enable receive logic */
 738         nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
 739         priv->hw_enable = true;
 740         mutex_unlock(&priv->lock);
 741 }
 742
 743 static void enc28j60_hw_disable(struct enc28j60_net *priv)
 744 {
 745         mutex_lock(&priv->lock);
 746         /* disable interrutps and packet reception */
 747         nolock_regb_write(priv, EIE, 0x00);
 748         nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
 749         priv->hw_enable = false;
 750         mutex_unlock(&priv->lock);
 751 }
 752
 753 static int
 754 enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
 755 {
 756         struct enc28j60_net *priv = netdev_priv(ndev);
 757         int ret = 0;
 758
 759         if (!priv->hw_enable) {
 760                 /* link is in low power mode now; duplex setting
 761                  * will take effect on next enc28j60_hw_init().
 762                  */
 763                 if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
 764                         priv->full_duplex = (duplex == DUPLEX_FULL);
 765                 else {
 766                         if (netif_msg_link(priv))
 767                                 dev_warn(&ndev->dev,
 768                                         "unsupported link setting\n");
 769                         ret = -EOPNOTSUPP;
 770                 }
 771         } else {
 772                 if (netif_msg_link(priv))
 773                         dev_warn(&ndev->dev, "Warning: hw must be disabled "
 774                                 "to set link mode\n");
 775                 ret = -EBUSY;
 776         }
 777         return ret;
 778 }
 779
 780 /*
 781  * Read the Transmit Status Vector
 782  */
 783 static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
 784 {
 785         int endptr;
 786
 787         endptr = locked_regw_read(priv, ETXNDL);
 788         if (netif_msg_hw(priv))
 789                 printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",
 790                          endptr + 1);
 791         enc28j60_mem_read(priv, endptr + 1, sizeof(tsv), tsv);
 792 }
 793
 794 static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
 795                                 u8 tsv[TSV_SIZE])
 796 {
 797         u16 tmp1, tmp2;
 798
 799         printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);
 800         tmp1 = tsv[1];
 801         tmp1 <<= 8;
 802         tmp1 |= tsv[0];
 803
 804         tmp2 = tsv[5];
 805         tmp2 <<= 8;
 806         tmp2 |= tsv[4];
 807
 808         printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"
 809                 " TotByteOnWire: %d\n", tmp1, tsv[2] & 0x0f, tmp2);
 810         printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"
 811                 " LenOutOfRange: %d\n", TSV_GETBIT(tsv, TSV_TXDONE),
 812                 TSV_GETBIT(tsv, TSV_TXCRCERROR),
 813                 TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
 814                 TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
 815         printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
 816                 "PacketDefer: %d, ExDefer: %d\n",
 817                 TSV_GETBIT(tsv, TSV_TXMULTICAST),
 818                 TSV_GETBIT(tsv, TSV_TXBROADCAST),
 819                 TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
 820                 TSV_GETBIT(tsv, TSV_TXEXDEFER));
 821         printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "
 822                  "Giant: %d, Underrun: %d\n",
 823                  TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
 824                  TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
 825                  TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
 826         printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "
 827                  "BackPressApp: %d, VLanTagFrame: %d\n",
 828                  TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
 829                  TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
 830                  TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
 831                  TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
 832 }
 833
 834 /*
 835  * Receive Status vector
 836  */
 837 static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
 838                               u16 pk_ptr, int len, u16 sts)
 839 {
 840         printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
 841                 msg, pk_ptr);
 842         printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
 843                  RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
 844         printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
 845                  " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
 846                  RSV_GETBIT(sts, RSV_CRCERROR),
 847                  RSV_GETBIT(sts, RSV_LENCHECKERR),
 848                  RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
 849         printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
 850                  "LongDropEvent: %d, CarrierEvent: %d\n",
 851                  RSV_GETBIT(sts, RSV_RXMULTICAST),
 852                  RSV_GETBIT(sts, RSV_RXBROADCAST),
 853                  RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
 854                  RSV_GETBIT(sts, RSV_CARRIEREV));
 855         printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
 856                  " UnknownOp: %d, VLanTagFrame: %d\n",
 857                  RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
 858                  RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
 859                  RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
 860                  RSV_GETBIT(sts, RSV_RXTYPEVLAN));
 861 }
 862
 863 static void dump_packet(const char *msg, int len, const char *data)
 864 {
 865         printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
 866         print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
 867                         data, len, true);
 868 }
 869
 870 /*
 871  * Hardware receive function.
 872  * Read the buffer memory, update the FIFO pointer to free the buffer,
 873  * check the status vector and decrement the packet counter.
 874  */
 875 static void enc28j60_hw_rx(struct net_device *ndev)
 876 {
 877         struct enc28j60_net *priv = netdev_priv(ndev);
 878         struct sk_buff *skb = NULL;
 879         u16 erxrdpt, next_packet, rxstat;
 880         u8 rsv[RSV_SIZE];
 881         int len;
 882
 883         if (netif_msg_rx_status(priv))
 884                 printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
 885                         priv->next_pk_ptr);
 886
 887         if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
 888                 if (netif_msg_rx_err(priv))
 889                         dev_err(&ndev->dev,
 890                                 "%s() Invalid packet address!! 0x%04x\n",
 891                                 __func__, priv->next_pk_ptr);
 892                 /* packet address corrupted: reset RX logic */
 893                 mutex_lock(&priv->lock);
 894                 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
 895                 nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
 896                 nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
 897                 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
 898                 nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
 899                 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
 900                 mutex_unlock(&priv->lock);
 901                 ndev->stats.rx_errors++;
 902                 return;
 903         }
 904         /* Read next packet pointer and rx status vector */
 905         enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
 906
 907         next_packet = rsv[1];
 908         next_packet <<= 8;
 909         next_packet |= rsv[0];
 910
 911         len = rsv[3];
 912         len <<= 8;
 913         len |= rsv[2];
 914
 915         rxstat = rsv[5];
 916         rxstat <<= 8;
 917         rxstat |= rsv[4];
 918
 919         if (netif_msg_rx_status(priv))
 920                 enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
 921
 922         if (!RSV_GETBIT(rxstat, RSV_RXOK)) {
 923                 if (netif_msg_rx_err(priv))
 924                         dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
 925                 ndev->stats.rx_errors++;
 926                 if (RSV_GETBIT(rxstat, RSV_CRCERROR))
 927                         ndev->stats.rx_crc_errors++;
 928                 if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
 929                         ndev->stats.rx_frame_errors++;
 930         } else {
 931                 skb = dev_alloc_skb(len + NET_IP_ALIGN);
 932                 if (!skb) {
 933                         if (netif_msg_rx_err(priv))
 934                                 dev_err(&ndev->dev,
 935                                         "out of memory for Rx'd frame\n");
 936                         ndev->stats.rx_dropped++;
 937                 } else {
 938                         skb->dev = ndev;
 939                         skb_reserve(skb, NET_IP_ALIGN);
 940                         /* copy the packet from the receive buffer */
 941                         enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
 942                                         len, skb_put(skb, len));
 943                         if (netif_msg_pktdata(priv))
 944                                 dump_packet(__func__, skb->len, skb->data);
 945                         skb->protocol = eth_type_trans(skb, ndev);
 946                         /* update statistics */
 947                         ndev->stats.rx_packets++;
 948                         ndev->stats.rx_bytes += len;
 949                         ndev->last_rx = jiffies;
 950                         netif_rx(skb);
 951                 }
 952         }
 953         /*
 954          * Move the RX read pointer to the start of the next
 955          * received packet.
 956          * This frees the memory we just read out
 957          */
 958         erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
 959         if (netif_msg_hw(priv))
 960                 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
 961                         __func__, erxrdpt);
 962
 963         mutex_lock(&priv->lock);
 964         nolock_regw_write(priv, ERXRDPTL, erxrdpt);
 965 #ifdef CONFIG_ENC28J60_WRITEVERIFY
 966         if (netif_msg_drv(priv)) {
 967                 u16 reg;
 968                 reg = nolock_regw_read(priv, ERXRDPTL);
 969                 if (reg != erxrdpt)
 970                         printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
 971                                 "error (0x%04x - 0x%04x)\n", __func__,
 972                                 reg, erxrdpt);
 973         }
 974 #endif
 975         priv->next_pk_ptr = next_packet;
 976         /* we are done with this packet, decrement the packet counter */
 977         nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
 978         mutex_unlock(&priv->lock);
 979 }
 980
 981 /*
 982  * Calculate free space in RxFIFO
 983  */
 984 static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
 985 {
 986         int epkcnt, erxst, erxnd, erxwr, erxrd;
 987         int free_space;
 988
 989         mutex_lock(&priv->lock);
 990         epkcnt = nolock_regb_read(priv, EPKTCNT);
 991         if (epkcnt >= 255)
 992                 free_space = -1;
 993         else {
 994                 erxst = nolock_regw_read(priv, ERXSTL);
 995                 erxnd = nolock_regw_read(priv, ERXNDL);
 996                 erxwr = nolock_regw_read(priv, ERXWRPTL);
 997                 erxrd = nolock_regw_read(priv, ERXRDPTL);
 998
 999                 if (erxwr > erxrd)
1000                         free_space = (erxnd - erxst) - (erxwr - erxrd);
1001                 else if (erxwr == erxrd)
1002                         free_space = (erxnd - erxst);
1003                 else
1004                         free_space = erxrd - erxwr - 1;
1005         }
1006         mutex_unlock(&priv->lock);
1007         if (netif_msg_rx_status(priv))
1008                 printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
1009                         __func__, free_space);
1010         return free_space;
1011 }
1012
1013 /*
1014  * Access the PHY to determine link status
1015  */
1016 static void enc28j60_check_link_status(struct net_device *ndev)
1017 {
1018         struct enc28j60_net *priv = netdev_priv(ndev);
1019         u16 reg;
1020         int duplex;
1021
1022         reg = enc28j60_phy_read(priv, PHSTAT2);
1023         if (netif_msg_hw(priv))
1024                 printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
1025                         "PHSTAT2: %04x\n", __func__,
1026                         enc28j60_phy_read(priv, PHSTAT1), reg);
1027         duplex = reg & PHSTAT2_DPXSTAT;
1028
1029         if (reg & PHSTAT2_LSTAT) {
1030                 netif_carrier_on(ndev);
1031                 if (netif_msg_ifup(priv))
1032                         dev_info(&ndev->dev, "link up - %s\n",
1033                                 duplex ? "Full duplex" : "Half duplex");
1034         } else {
1035                 if (netif_msg_ifdown(priv))
1036                         dev_info(&ndev->dev, "link down\n");
1037                 netif_carrier_off(ndev);
1038         }
1039 }
1040
1041 static void enc28j60_tx_clear(struct net_device *ndev, bool err)
1042 {
1043         struct enc28j60_net *priv = netdev_priv(ndev);
1044
1045         if (err)
1046                 ndev->stats.tx_errors++;
1047         else
1048                 ndev->stats.tx_packets++;
1049
1050         if (priv->tx_skb) {
1051                 if (!err)
1052                         ndev->stats.tx_bytes += priv->tx_skb->len;
1053                 dev_kfree_skb(priv->tx_skb);
1054                 priv->tx_skb = NULL;
1055         }
1056         locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1057         netif_wake_queue(ndev);
1058 }
1059
1060 /*
1061  * RX handler
1062  * ignore PKTIF because is unreliable! (look at the errata datasheet)
1063  * check EPKTCNT is the suggested workaround.
1064  * We don't need to clear interrupt flag, automatically done when
1065  * enc28j60_hw_rx() decrements the packet counter.
1066  * Returns how many packet processed.
1067  */
1068 static int enc28j60_rx_interrupt(struct net_device *ndev)
1069 {
1070         struct enc28j60_net *priv = netdev_priv(ndev);
1071         int pk_counter, ret;
1072
1073         pk_counter = locked_regb_read(priv, EPKTCNT);
1074         if (pk_counter && netif_msg_intr(priv))
1075                 printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
1076         if (pk_counter > priv->max_pk_counter) {
1077                 /* update statistics */
1078                 priv->max_pk_counter = pk_counter;
1079                 if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
1080                         printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
1081                                 priv->max_pk_counter);
1082         }
1083         ret = pk_counter;
1084         while (pk_counter-- > 0)
1085                 enc28j60_hw_rx(ndev);
1086
1087         return ret;
1088 }
1089
1090 static void enc28j60_irq_work_handler(struct work_struct *work)
1091 {
1092         struct enc28j60_net *priv =
1093                 container_of(work, struct enc28j60_net, irq_work);
1094         struct net_device *ndev = priv->netdev;
1095         int intflags, loop;
1096
1097         if (netif_msg_intr(priv))
1098                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1099         /* disable further interrupts */
1100         locked_reg_bfclr(priv, EIE, EIE_INTIE);
1101
1102         do {
1103                 loop = 0;
1104                 intflags = locked_regb_read(priv, EIR);
1105                 /* DMA interrupt handler (not currently used) */
1106                 if ((intflags & EIR_DMAIF) != 0) {
1107                         loop++;
1108                         if (netif_msg_intr(priv))
1109                                 printk(KERN_DEBUG DRV_NAME
1110                                         ": intDMA(%d)\n", loop);
1111                         locked_reg_bfclr(priv, EIR, EIR_DMAIF);
1112                 }
1113                 /* LINK changed handler */
1114                 if ((intflags & EIR_LINKIF) != 0) {
1115                         loop++;
1116                         if (netif_msg_intr(priv))
1117                                 printk(KERN_DEBUG DRV_NAME
1118                                         ": intLINK(%d)\n", loop);
1119                         enc28j60_check_link_status(ndev);
1120                         /* read PHIR to clear the flag */
1121                         enc28j60_phy_read(priv, PHIR);
1122                 }
1123                 /* TX complete handler */
1124                 if ((intflags & EIR_TXIF) != 0) {
1125                         bool err = false;
1126                         loop++;
1127                         if (netif_msg_intr(priv))
1128                                 printk(KERN_DEBUG DRV_NAME
1129                                         ": intTX(%d)\n", loop);
1130                         priv->tx_retry_count = 0;
1131                         if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
1132                                 if (netif_msg_tx_err(priv))
1133                                         dev_err(&ndev->dev,
1134                                                 "Tx Error (aborted)\n");
1135                                 err = true;
1136                         }
1137                         if (netif_msg_tx_done(priv)) {
1138                                 u8 tsv[TSV_SIZE];
1139                                 enc28j60_read_tsv(priv, tsv);
1140                                 enc28j60_dump_tsv(priv, "Tx Done", tsv);
1141                         }
1142                         enc28j60_tx_clear(ndev, err);
1143                         locked_reg_bfclr(priv, EIR, EIR_TXIF);
1144                 }
1145                 /* TX Error handler */
1146                 if ((intflags & EIR_TXERIF) != 0) {
1147                         u8 tsv[TSV_SIZE];
1148
1149                         loop++;
1150                         if (netif_msg_intr(priv))
1151                                 printk(KERN_DEBUG DRV_NAME
1152                                         ": intTXErr(%d)\n", loop);
1153                         locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1154                         enc28j60_read_tsv(priv, tsv);
1155                         if (netif_msg_tx_err(priv))
1156                                 enc28j60_dump_tsv(priv, "Tx Error", tsv);
1157                         /* Reset TX logic */
1158                         mutex_lock(&priv->lock);
1159                         nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
1160                         nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
1161                         nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
1162                         mutex_unlock(&priv->lock);
1163                         /* Transmit Late collision check for retransmit */
1164                         if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
1165                                 if (netif_msg_tx_err(priv))
1166                                         printk(KERN_DEBUG DRV_NAME
1167                                                 ": LateCollision TXErr (%d)\n",
1168                                                 priv->tx_retry_count);
1169                                 if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
1170                                         locked_reg_bfset(priv, ECON1,
1171                                                            ECON1_TXRTS);
1172                                 else
1173                                         enc28j60_tx_clear(ndev, true);
1174                         } else
1175                                 enc28j60_tx_clear(ndev, true);
1176                         locked_reg_bfclr(priv, EIR, EIR_TXERIF);
1177                 }
1178                 /* RX Error handler */
1179                 if ((intflags & EIR_RXERIF) != 0) {
1180                         loop++;
1181                         if (netif_msg_intr(priv))
1182                                 printk(KERN_DEBUG DRV_NAME
1183                                         ": intRXErr(%d)\n", loop);
1184                         /* Check free FIFO space to flag RX overrun */
1185                         if (enc28j60_get_free_rxfifo(priv) <= 0) {
1186                                 if (netif_msg_rx_err(priv))
1187                                         printk(KERN_DEBUG DRV_NAME
1188                                                 ": RX Overrun\n");
1189                                 ndev->stats.rx_dropped++;
1190                         }
1191                         locked_reg_bfclr(priv, EIR, EIR_RXERIF);
1192                 }
1193                 /* RX handler */
1194                 if (enc28j60_rx_interrupt(ndev))
1195                         loop++;
1196         } while (loop);
1197
1198         /* re-enable interrupts */
1199         locked_reg_bfset(priv, EIE, EIE_INTIE);
1200         if (netif_msg_intr(priv))
1201                 printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
1202 }
1203
1204 /*
1205  * Hardware transmit function.
1206  * Fill the buffer memory and send the contents of the transmit buffer
1207  * onto the network
1208  */
1209 static void enc28j60_hw_tx(struct enc28j60_net *priv)
1210 {
1211         if (netif_msg_tx_queued(priv))
1212                 printk(KERN_DEBUG DRV_NAME
1213                         ": Tx Packet Len:%d\n", priv->tx_skb->len);
1214
1215         if (netif_msg_pktdata(priv))
1216                 dump_packet(__func__,
1217                             priv->tx_skb->len, priv->tx_skb->data);
1218         enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
1219
1220 #ifdef CONFIG_ENC28J60_WRITEVERIFY
1221         /* readback and verify written data */
1222         if (netif_msg_drv(priv)) {
1223                 int test_len, k;
1224                 u8 test_buf[64]; /* limit the test to the first 64 bytes */
1225                 int okflag;
1226
1227                 test_len = priv->tx_skb->len;
1228                 if (test_len > sizeof(test_buf))
1229                         test_len = sizeof(test_buf);
1230
1231                 /* + 1 to skip control byte */
1232                 enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
1233                 okflag = 1;
1234                 for (k = 0; k < test_len; k++) {
1235                         if (priv->tx_skb->data[k] != test_buf[k]) {
1236                                 printk(KERN_DEBUG DRV_NAME
1237                                          ": Error, %d location differ: "
1238                                          "0x%02x-0x%02x\n", k,
1239                                          priv->tx_skb->data[k], test_buf[k]);
1240                                 okflag = 0;
1241                         }
1242                 }
1243                 if (!okflag)
1244                         printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
1245                                 "verify ERROR!\n");
1246         }
1247 #endif
1248         /* set TX request flag */
1249         locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
1250 }
1251
1252 static int enc28j60_send_packet(struct sk_buff *skb, struct net_device *dev)
1253 {
1254         struct enc28j60_net *priv = netdev_priv(dev);
1255
1256         if (netif_msg_tx_queued(priv))
1257                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1258
1259         /* If some error occurs while trying to transmit this
1260          * packet, you should return '1' from this function.
1261          * In such a case you _may not_ do anything to the
1262          * SKB, it is still owned by the network queueing
1263          * layer when an error is returned.  This means you
1264          * may not modify any SKB fields, you may not free
1265          * the SKB, etc.
1266          */
1267         netif_stop_queue(dev);
1268
1269         /* save the timestamp */
1270         priv->netdev->trans_start = jiffies;
1271         /* Remember the skb for deferred processing */
1272         priv->tx_skb = skb;
1273         schedule_work(&priv->tx_work);
1274
1275         return 0;
1276 }
1277
1278 static void enc28j60_tx_work_handler(struct work_struct *work)
1279 {
1280         struct enc28j60_net *priv =
1281                 container_of(work, struct enc28j60_net, tx_work);
1282
1283         /* actual delivery of data */
1284         enc28j60_hw_tx(priv);
1285 }
1286
1287 static irqreturn_t enc28j60_irq(int irq, void *dev_id)
1288 {
1289         struct enc28j60_net *priv = dev_id;
1290
1291         /*
1292          * Can't do anything in interrupt context because we need to
1293          * block (spi_sync() is blocking) so fire of the interrupt
1294          * handling workqueue.
1295          * Remember that we access enc28j60 registers through SPI bus
1296          * via spi_sync() call.
1297          */
1298         schedule_work(&priv->irq_work);
1299
1300         return IRQ_HANDLED;
1301 }
1302
1303 static void enc28j60_tx_timeout(struct net_device *ndev)
1304 {
1305         struct enc28j60_net *priv = netdev_priv(ndev);
1306
1307         if (netif_msg_timer(priv))
1308                 dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
1309
1310         ndev->stats.tx_errors++;
1311         /* can't restart safely under softirq */
1312         schedule_work(&priv->restart_work);
1313 }
1314
1315 /*
1316  * Open/initialize the board. This is called (in the current kernel)
1317  * sometime after booting when the 'ifconfig' program is run.
1318  *
1319  * This routine should set everything up anew at each open, even
1320  * registers that "should" only need to be set once at boot, so that
1321  * there is non-reboot way to recover if something goes wrong.
1322  */
1323 static int enc28j60_net_open(struct net_device *dev)
1324 {
1325         struct enc28j60_net *priv = netdev_priv(dev);
1326
1327         if (netif_msg_drv(priv))
1328                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1329
1330         if (!is_valid_ether_addr(dev->dev_addr)) {
1331                 if (netif_msg_ifup(priv)) {
1332                         DECLARE_MAC_BUF(mac);
1333                         dev_err(&dev->dev, "invalid MAC address %s\n",
1334                                 print_mac(mac, dev->dev_addr));
1335                 }
1336                 return -EADDRNOTAVAIL;
1337         }
1338         /* Reset the hardware here (and take it out of low power mode) */
1339         enc28j60_lowpower(priv, false);
1340         enc28j60_hw_disable(priv);
1341         if (!enc28j60_hw_init(priv)) {
1342                 if (netif_msg_ifup(priv))
1343                         dev_err(&dev->dev, "hw_reset() failed\n");
1344                 return -EINVAL;
1345         }
1346         /* Update the MAC address (in case user has changed it) */
1347         enc28j60_set_hw_macaddr(dev);
1348         /* Enable interrupts */
1349         enc28j60_hw_enable(priv);
1350         /* check link status */
1351         enc28j60_check_link_status(dev);
1352         /* We are now ready to accept transmit requests from
1353          * the queueing layer of the networking.
1354          */
1355         netif_start_queue(dev);
1356
1357         return 0;
1358 }
1359
1360 /* The inverse routine to net_open(). */
1361 static int enc28j60_net_close(struct net_device *dev)
1362 {
1363         struct enc28j60_net *priv = netdev_priv(dev);
1364
1365         if (netif_msg_drv(priv))
1366                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1367
1368         enc28j60_hw_disable(priv);
1369         enc28j60_lowpower(priv, true);
1370         netif_stop_queue(dev);
1371
1372         return 0;
1373 }
1374
1375 /*
1376  * Set or clear the multicast filter for this adapter
1377  * num_addrs == -1      Promiscuous mode, receive all packets
1378  * num_addrs == 0       Normal mode, filter out multicast packets
1379  * num_addrs > 0        Multicast mode, receive normal and MC packets
1380  */
1381 static void enc28j60_set_multicast_list(struct net_device *dev)
1382 {
1383         struct enc28j60_net *priv = netdev_priv(dev);
1384         int oldfilter = priv->rxfilter;
1385
1386         if (dev->flags & IFF_PROMISC) {
1387                 if (netif_msg_link(priv))
1388                         dev_info(&dev->dev, "promiscuous mode\n");
1389                 priv->rxfilter = RXFILTER_PROMISC;
1390         } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
1391                 if (netif_msg_link(priv))
1392                         dev_info(&dev->dev, "%smulticast mode\n",
1393                                 (dev->flags & IFF_ALLMULTI) ? "all-" : "");
1394                 priv->rxfilter = RXFILTER_MULTI;
1395         } else {
1396                 if (netif_msg_link(priv))
1397                         dev_info(&dev->dev, "normal mode\n");
1398                 priv->rxfilter = RXFILTER_NORMAL;
1399         }
1400
1401         if (oldfilter != priv->rxfilter)
1402                 schedule_work(&priv->setrx_work);
1403 }
1404
1405 static void enc28j60_setrx_work_handler(struct work_struct *work)
1406 {
1407         struct enc28j60_net *priv =
1408                 container_of(work, struct enc28j60_net, setrx_work);
1409
1410         if (priv->rxfilter == RXFILTER_PROMISC) {
1411                 if (netif_msg_drv(priv))
1412                         printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
1413                 locked_regb_write(priv, ERXFCON, 0x00);
1414         } else if (priv->rxfilter == RXFILTER_MULTI) {
1415                 if (netif_msg_drv(priv))
1416                         printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
1417                 locked_regb_write(priv, ERXFCON,
1418                                         ERXFCON_UCEN | ERXFCON_CRCEN |
1419                                         ERXFCON_BCEN | ERXFCON_MCEN);
1420         } else {
1421                 if (netif_msg_drv(priv))
1422                         printk(KERN_DEBUG DRV_NAME ": normal mode\n");
1423                 locked_regb_write(priv, ERXFCON,
1424                                         ERXFCON_UCEN | ERXFCON_CRCEN |
1425                                         ERXFCON_BCEN);
1426         }
1427 }
1428
1429 static void enc28j60_restart_work_handler(struct work_struct *work)
1430 {
1431         struct enc28j60_net *priv =
1432                         container_of(work, struct enc28j60_net, restart_work);
1433         struct net_device *ndev = priv->netdev;
1434         int ret;
1435
1436         rtnl_lock();
1437         if (netif_running(ndev)) {
1438                 enc28j60_net_close(ndev);
1439                 ret = enc28j60_net_open(ndev);
1440                 if (unlikely(ret)) {
1441                         dev_info(&ndev->dev, " could not restart %d\n", ret);
1442                         dev_close(ndev);
1443                 }
1444         }
1445         rtnl_unlock();
1446 }
1447
1448 /* ......................... ETHTOOL SUPPORT ........................... */
1449
1450 static void
1451 enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1452 {
1453         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1454         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1455         strlcpy(info->bus_info,
1456                 dev->dev.parent->bus_id, sizeof(info->bus_info));
1457 }
1458
1459 static int
1460 enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1461 {
1462         struct enc28j60_net *priv = netdev_priv(dev);
1463
1464         cmd->transceiver = XCVR_INTERNAL;
1465         cmd->supported  = SUPPORTED_10baseT_Half
1466                         | SUPPORTED_10baseT_Full
1467                         | SUPPORTED_TP;
1468         cmd->speed      = SPEED_10;
1469         cmd->duplex     = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
1470         cmd->port       = PORT_TP;
1471         cmd->autoneg    = AUTONEG_DISABLE;
1472
1473         return 0;
1474 }
1475
1476 static int
1477 enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1478 {
1479         return enc28j60_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
1480 }
1481
1482 static u32 enc28j60_get_msglevel(struct net_device *dev)
1483 {
1484         struct enc28j60_net *priv = netdev_priv(dev);
1485         return priv->msg_enable;
1486 }
1487
1488 static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
1489 {
1490         struct enc28j60_net *priv = netdev_priv(dev);
1491         priv->msg_enable = val;
1492 }
1493
1494 static const struct ethtool_ops enc28j60_ethtool_ops = {
1495         .get_settings   = enc28j60_get_settings,
1496         .set_settings   = enc28j60_set_settings,
1497         .get_drvinfo    = enc28j60_get_drvinfo,
1498         .get_msglevel   = enc28j60_get_msglevel,
1499         .set_msglevel   = enc28j60_set_msglevel,
1500 };
1501
1502 static int enc28j60_chipset_init(struct net_device *dev)
1503 {
1504         struct enc28j60_net *priv = netdev_priv(dev);
1505
1506         return enc28j60_hw_init(priv);
1507 }
1508
1509 static int __devinit enc28j60_probe(struct spi_device *spi)
1510 {
1511         struct net_device *dev;
1512         struct enc28j60_net *priv;
1513         int ret = 0;
1514
1515         if (netif_msg_drv(&debug))
1516                 dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
1517                         DRV_VERSION);
1518
1519         dev = alloc_etherdev(sizeof(struct enc28j60_net));
1520         if (!dev) {
1521                 if (netif_msg_drv(&debug))
1522                         dev_err(&spi->dev, DRV_NAME
1523                                 ": unable to alloc new ethernet\n");
1524                 ret = -ENOMEM;
1525                 goto error_alloc;
1526         }
1527         priv = netdev_priv(dev);
1528
1529         priv->netdev = dev;     /* priv to netdev reference */
1530         priv->spi = spi;        /* priv to spi reference */
1531         priv->msg_enable = netif_msg_init(debug.msg_enable,
1532                                                 ENC28J60_MSG_DEFAULT);
1533         mutex_init(&priv->lock);
1534         INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
1535         INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
1536         INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
1537         INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
1538         dev_set_drvdata(&spi->dev, priv);       /* spi to priv reference */
1539         SET_NETDEV_DEV(dev, &spi->dev);
1540
1541         if (!enc28j60_chipset_init(dev)) {
1542                 if (netif_msg_probe(priv))
1543                         dev_info(&spi->dev, DRV_NAME " chip not found\n");
1544                 ret = -EIO;
1545                 goto error_irq;
1546         }
1547         random_ether_addr(dev->dev_addr);
1548         enc28j60_set_hw_macaddr(dev);
1549
1550         /* Board setup must set the relevant edge trigger type;
1551          * level triggers won't currently work.
1552          */
1553         ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
1554         if (ret < 0) {
1555                 if (netif_msg_probe(priv))
1556                         dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
1557                                 "(ret = %d)\n", spi->irq, ret);
1558                 goto error_irq;
1559         }
1560
1561         dev->if_port = IF_PORT_10BASET;
1562         dev->irq = spi->irq;
1563         dev->open = enc28j60_net_open;
1564         dev->stop = enc28j60_net_close;
1565         dev->hard_start_xmit = enc28j60_send_packet;
1566         dev->set_multicast_list = &enc28j60_set_multicast_list;
1567         dev->set_mac_address = enc28j60_set_mac_address;
1568         dev->tx_timeout = &enc28j60_tx_timeout;
1569         dev->watchdog_timeo = TX_TIMEOUT;
1570         SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
1571
1572         enc28j60_lowpower(priv, true);
1573
1574         ret = register_netdev(dev);
1575         if (ret) {
1576                 if (netif_msg_probe(priv))
1577                         dev_err(&spi->dev, "register netdev " DRV_NAME
1578                                 " failed (ret = %d)\n", ret);
1579                 goto error_register;
1580         }
1581         dev_info(&dev->dev, DRV_NAME " driver registered\n");
1582
1583         return 0;
1584
1585 error_register:
1586         free_irq(spi->irq, priv);
1587 error_irq:
1588         free_netdev(dev);
1589 error_alloc:
1590         return ret;
1591 }
1592
1593 static int __devexit enc28j60_remove(struct spi_device *spi)
1594 {
1595         struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
1596
1597         if (netif_msg_drv(priv))
1598                 printk(KERN_DEBUG DRV_NAME ": remove\n");
1599
1600         unregister_netdev(priv->netdev);
1601         free_irq(spi->irq, priv);
1602         free_netdev(priv->netdev);
1603
1604         return 0;
1605 }
1606
1607 static struct spi_driver enc28j60_driver = {
1608         .driver = {
1609                    .name = DRV_NAME,
1610                    .owner = THIS_MODULE,
1611          },
1612         .probe = enc28j60_probe,
1613         .remove = __devexit_p(enc28j60_remove),
1614 };
1615
1616 static int __init enc28j60_init(void)
1617 {
1618         msec20_to_jiffies = msecs_to_jiffies(20);
1619
1620         return spi_register_driver(&enc28j60_driver);
1621 }
1622
1623 module_init(enc28j60_init);
1624
1625 static void __exit enc28j60_exit(void)
1626 {
1627         spi_unregister_driver(&enc28j60_driver);
1628 }
1629
1630 module_exit(enc28j60_exit);
1631
1632 MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
1633 MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
1634 MODULE_LICENSE("GPL");
1635 module_param_named(debug, debug.msg_enable, int, 0);
1636 MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");