git.oblomov.eu Git - linux-2.6/blob - drivers/net/ibm_newemac/phy.c

   1 /*
   2  * drivers/net/ibm_newemac/phy.c
   3  *
   4  * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
   5  * Borrowed from sungem_phy.c, though I only kept the generic MII
   6  * driver for now.
   7  *
   8  * This file should be shared with other drivers or eventually
   9  * merged as the "low level" part of miilib
  10  *
  11  * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
  12  *                <benh@kernel.crashing.org>
  13  *
  14  * Based on the arch/ppc version of the driver:
  15  *
  16  * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
  17  * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
  18  *
  19  */
  20 #include <linux/module.h>
  21 #include <linux/kernel.h>
  22 #include <linux/types.h>
  23 #include <linux/netdevice.h>
  24 #include <linux/mii.h>
  25 #include <linux/ethtool.h>
  26 #include <linux/delay.h>
  27
  28 #include "emac.h"
  29 #include "phy.h"
  30
  31 static inline int phy_read(struct mii_phy *phy, int reg)
  32 {
  33         return phy->mdio_read(phy->dev, phy->address, reg);
  34 }
  35
  36 static inline void phy_write(struct mii_phy *phy, int reg, int val)
  37 {
  38         phy->mdio_write(phy->dev, phy->address, reg, val);
  39 }
  40
  41 static inline int gpcs_phy_read(struct mii_phy *phy, int reg)
  42 {
  43         return phy->mdio_read(phy->dev, phy->gpcs_address, reg);
  44 }
  45
  46 static inline void gpcs_phy_write(struct mii_phy *phy, int reg, int val)
  47 {
  48         phy->mdio_write(phy->dev, phy->gpcs_address, reg, val);
  49 }
  50
  51 int emac_mii_reset_phy(struct mii_phy *phy)
  52 {
  53         int val;
  54         int limit = 10000;
  55
  56         val = phy_read(phy, MII_BMCR);
  57         val &= ~(BMCR_ISOLATE | BMCR_ANENABLE);
  58         val |= BMCR_RESET;
  59         phy_write(phy, MII_BMCR, val);
  60
  61         udelay(300);
  62
  63         while (limit--) {
  64                 val = phy_read(phy, MII_BMCR);
  65                 if (val >= 0 && (val & BMCR_RESET) == 0)
  66                         break;
  67                 udelay(10);
  68         }
  69         if ((val & BMCR_ISOLATE) && limit > 0)
  70                 phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
  71
  72         return limit <= 0;
  73 }
  74
  75 int emac_mii_reset_gpcs(struct mii_phy *phy)
  76 {
  77         int val;
  78         int limit = 10000;
  79
  80         val = gpcs_phy_read(phy, MII_BMCR);
  81         val &= ~(BMCR_ISOLATE | BMCR_ANENABLE);
  82         val |= BMCR_RESET;
  83         gpcs_phy_write(phy, MII_BMCR, val);
  84
  85         udelay(300);
  86
  87         while (limit--) {
  88                 val = gpcs_phy_read(phy, MII_BMCR);
  89                 if (val >= 0 && (val & BMCR_RESET) == 0)
  90                         break;
  91                 udelay(10);
  92         }
  93         if ((val & BMCR_ISOLATE) && limit > 0)
  94                 gpcs_phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
  95
  96         if (limit > 0 && phy->mode == PHY_MODE_SGMII) {
  97                 /* Configure GPCS interface to recommended setting for SGMII */
  98                 gpcs_phy_write(phy, 0x04, 0x8120); /* AsymPause, FDX */
  99                 gpcs_phy_write(phy, 0x07, 0x2801); /* msg_pg, toggle */
 100                 gpcs_phy_write(phy, 0x00, 0x0140); /* 1Gbps, FDX     */
 101         }
 102
 103         return limit <= 0;
 104 }
 105
 106 static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
 107 {
 108         int ctl, adv;
 109
 110         phy->autoneg = AUTONEG_ENABLE;
 111         phy->speed = SPEED_10;
 112         phy->duplex = DUPLEX_HALF;
 113         phy->pause = phy->asym_pause = 0;
 114         phy->advertising = advertise;
 115
 116         ctl = phy_read(phy, MII_BMCR);
 117         if (ctl < 0)
 118                 return ctl;
 119         ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
 120
 121         /* First clear the PHY */
 122         phy_write(phy, MII_BMCR, ctl);
 123
 124         /* Setup standard advertise */
 125         adv = phy_read(phy, MII_ADVERTISE);
 126         if (adv < 0)
 127                 return adv;
 128         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
 129                  ADVERTISE_PAUSE_ASYM);
 130         if (advertise & ADVERTISED_10baseT_Half)
 131                 adv |= ADVERTISE_10HALF;
 132         if (advertise & ADVERTISED_10baseT_Full)
 133                 adv |= ADVERTISE_10FULL;
 134         if (advertise & ADVERTISED_100baseT_Half)
 135                 adv |= ADVERTISE_100HALF;
 136         if (advertise & ADVERTISED_100baseT_Full)
 137                 adv |= ADVERTISE_100FULL;
 138         if (advertise & ADVERTISED_Pause)
 139                 adv |= ADVERTISE_PAUSE_CAP;
 140         if (advertise & ADVERTISED_Asym_Pause)
 141                 adv |= ADVERTISE_PAUSE_ASYM;
 142         phy_write(phy, MII_ADVERTISE, adv);
 143
 144         if (phy->features &
 145             (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
 146                 adv = phy_read(phy, MII_CTRL1000);
 147                 if (adv < 0)
 148                         return adv;
 149                 adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 150                 if (advertise & ADVERTISED_1000baseT_Full)
 151                         adv |= ADVERTISE_1000FULL;
 152                 if (advertise & ADVERTISED_1000baseT_Half)
 153                         adv |= ADVERTISE_1000HALF;
 154                 phy_write(phy, MII_CTRL1000, adv);
 155         }
 156
 157         /* Start/Restart aneg */
 158         ctl = phy_read(phy, MII_BMCR);
 159         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 160         phy_write(phy, MII_BMCR, ctl);
 161
 162         return 0;
 163 }
 164
 165 static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
 166 {
 167         int ctl;
 168
 169         phy->autoneg = AUTONEG_DISABLE;
 170         phy->speed = speed;
 171         phy->duplex = fd;
 172         phy->pause = phy->asym_pause = 0;
 173
 174         ctl = phy_read(phy, MII_BMCR);
 175         if (ctl < 0)
 176                 return ctl;
 177         ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
 178
 179         /* First clear the PHY */
 180         phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
 181
 182         /* Select speed & duplex */
 183         switch (speed) {
 184         case SPEED_10:
 185                 break;
 186         case SPEED_100:
 187                 ctl |= BMCR_SPEED100;
 188                 break;
 189         case SPEED_1000:
 190                 ctl |= BMCR_SPEED1000;
 191                 break;
 192         default:
 193                 return -EINVAL;
 194         }
 195         if (fd == DUPLEX_FULL)
 196                 ctl |= BMCR_FULLDPLX;
 197         phy_write(phy, MII_BMCR, ctl);
 198
 199         return 0;
 200 }
 201
 202 static int genmii_poll_link(struct mii_phy *phy)
 203 {
 204         int status;
 205
 206         /* Clear latched value with dummy read */
 207         phy_read(phy, MII_BMSR);
 208         status = phy_read(phy, MII_BMSR);
 209         if (status < 0 || (status & BMSR_LSTATUS) == 0)
 210                 return 0;
 211         if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
 212                 return 0;
 213         return 1;
 214 }
 215
 216 static int genmii_read_link(struct mii_phy *phy)
 217 {
 218         if (phy->autoneg == AUTONEG_ENABLE) {
 219                 int glpa = 0;
 220                 int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
 221                 if (lpa < 0)
 222                         return lpa;
 223
 224                 if (phy->features &
 225                     (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
 226                         int adv = phy_read(phy, MII_CTRL1000);
 227                         glpa = phy_read(phy, MII_STAT1000);
 228
 229                         if (glpa < 0 || adv < 0)
 230                                 return adv;
 231
 232                         glpa &= adv << 2;
 233                 }
 234
 235                 phy->speed = SPEED_10;
 236                 phy->duplex = DUPLEX_HALF;
 237                 phy->pause = phy->asym_pause = 0;
 238
 239                 if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
 240                         phy->speed = SPEED_1000;
 241                         if (glpa & LPA_1000FULL)
 242                                 phy->duplex = DUPLEX_FULL;
 243                 } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
 244                         phy->speed = SPEED_100;
 245                         if (lpa & LPA_100FULL)
 246                                 phy->duplex = DUPLEX_FULL;
 247                 } else if (lpa & LPA_10FULL)
 248                         phy->duplex = DUPLEX_FULL;
 249
 250                 if (phy->duplex == DUPLEX_FULL) {
 251                         phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 252                         phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 253                 }
 254         } else {
 255                 int bmcr = phy_read(phy, MII_BMCR);
 256                 if (bmcr < 0)
 257                         return bmcr;
 258
 259                 if (bmcr & BMCR_FULLDPLX)
 260                         phy->duplex = DUPLEX_FULL;
 261                 else
 262                         phy->duplex = DUPLEX_HALF;
 263                 if (bmcr & BMCR_SPEED1000)
 264                         phy->speed = SPEED_1000;
 265                 else if (bmcr & BMCR_SPEED100)
 266                         phy->speed = SPEED_100;
 267                 else
 268                         phy->speed = SPEED_10;
 269
 270                 phy->pause = phy->asym_pause = 0;
 271         }
 272         return 0;
 273 }
 274
 275 /* Generic implementation for most 10/100/1000 PHYs */
 276 static struct mii_phy_ops generic_phy_ops = {
 277         .setup_aneg     = genmii_setup_aneg,
 278         .setup_forced   = genmii_setup_forced,
 279         .poll_link      = genmii_poll_link,
 280         .read_link      = genmii_read_link
 281 };
 282
 283 static struct mii_phy_def genmii_phy_def = {
 284         .phy_id         = 0x00000000,
 285         .phy_id_mask    = 0x00000000,
 286         .name           = "Generic MII",
 287         .ops            = &generic_phy_ops
 288 };
 289
 290 /* CIS8201 */
 291 #define MII_CIS8201_10BTCSR     0x16
 292 #define  TENBTCSR_ECHO_DISABLE  0x2000
 293 #define MII_CIS8201_EPCR        0x17
 294 #define  EPCR_MODE_MASK         0x3000
 295 #define  EPCR_GMII_MODE         0x0000
 296 #define  EPCR_RGMII_MODE        0x1000
 297 #define  EPCR_TBI_MODE          0x2000
 298 #define  EPCR_RTBI_MODE         0x3000
 299 #define MII_CIS8201_ACSR        0x1c
 300 #define  ACSR_PIN_PRIO_SELECT   0x0004
 301
 302 static int cis8201_init(struct mii_phy *phy)
 303 {
 304         int epcr;
 305
 306         epcr = phy_read(phy, MII_CIS8201_EPCR);
 307         if (epcr < 0)
 308                 return epcr;
 309
 310         epcr &= ~EPCR_MODE_MASK;
 311
 312         switch (phy->mode) {
 313         case PHY_MODE_TBI:
 314                 epcr |= EPCR_TBI_MODE;
 315                 break;
 316         case PHY_MODE_RTBI:
 317                 epcr |= EPCR_RTBI_MODE;
 318                 break;
 319         case PHY_MODE_GMII:
 320                 epcr |= EPCR_GMII_MODE;
 321                 break;
 322         case PHY_MODE_RGMII:
 323         default:
 324                 epcr |= EPCR_RGMII_MODE;
 325         }
 326
 327         phy_write(phy, MII_CIS8201_EPCR, epcr);
 328
 329         /* MII regs override strap pins */
 330         phy_write(phy, MII_CIS8201_ACSR,
 331                   phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
 332
 333         /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
 334         phy_write(phy, MII_CIS8201_10BTCSR,
 335                   phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
 336
 337         return 0;
 338 }
 339
 340 static struct mii_phy_ops cis8201_phy_ops = {
 341         .init           = cis8201_init,
 342         .setup_aneg     = genmii_setup_aneg,
 343         .setup_forced   = genmii_setup_forced,
 344         .poll_link      = genmii_poll_link,
 345         .read_link      = genmii_read_link
 346 };
 347
 348 static struct mii_phy_def cis8201_phy_def = {
 349         .phy_id         = 0x000fc410,
 350         .phy_id_mask    = 0x000ffff0,
 351         .name           = "CIS8201 Gigabit Ethernet",
 352         .ops            = &cis8201_phy_ops
 353 };
 354
 355 static struct mii_phy_def bcm5248_phy_def = {
 356
 357         .phy_id         = 0x0143bc00,
 358         .phy_id_mask    = 0x0ffffff0,
 359         .name           = "BCM5248 10/100 SMII Ethernet",
 360         .ops            = &generic_phy_ops
 361 };
 362
 363 static int m88e1111_init(struct mii_phy *phy)
 364 {
 365         pr_debug("%s: Marvell 88E1111 Ethernet\n", __func__);
 366         phy_write(phy, 0x14, 0x0ce3);
 367         phy_write(phy, 0x18, 0x4101);
 368         phy_write(phy, 0x09, 0x0e00);
 369         phy_write(phy, 0x04, 0x01e1);
 370         phy_write(phy, 0x00, 0x9140);
 371         phy_write(phy, 0x00, 0x1140);
 372
 373         return  0;
 374 }
 375
 376 static int m88e1112_init(struct mii_phy *phy)
 377 {
 378         /*
 379          * Marvell 88E1112 PHY needs to have the SGMII MAC
 380          * interace (page 2) properly configured to
 381          * communicate with the 460EX/GT GPCS interface.
 382          */
 383
 384         u16 reg_short;
 385
 386         pr_debug("%s: Marvell 88E1112 Ethernet\n", __func__);
 387
 388         /* Set access to Page 2 */
 389         phy_write(phy, 0x16, 0x0002);
 390
 391         phy_write(phy, 0x00, 0x0040); /* 1Gbps */
 392         reg_short = (u16)(phy_read(phy, 0x1a));
 393         reg_short |= 0x8000; /* bypass Auto-Negotiation */
 394         phy_write(phy, 0x1a, reg_short);
 395         emac_mii_reset_phy(phy); /* reset MAC interface */
 396
 397         /* Reset access to Page 0 */
 398         phy_write(phy, 0x16, 0x0000);
 399
 400         return  0;
 401 }
 402
 403 static int et1011c_init(struct mii_phy *phy)
 404 {
 405         u16 reg_short;
 406
 407         reg_short = (u16)(phy_read(phy, 0x16));
 408         reg_short &= ~(0x7);
 409         reg_short |= 0x6;       /* RGMII Trace Delay*/
 410         phy_write(phy, 0x16, reg_short);
 411
 412         reg_short = (u16)(phy_read(phy, 0x17));
 413         reg_short &= ~(0x40);
 414         phy_write(phy, 0x17, reg_short);
 415
 416         phy_write(phy, 0x1c, 0x74f0);
 417         return 0;
 418 }
 419
 420 static struct mii_phy_ops et1011c_phy_ops = {
 421         .init           = et1011c_init,
 422         .setup_aneg     = genmii_setup_aneg,
 423         .setup_forced   = genmii_setup_forced,
 424         .poll_link      = genmii_poll_link,
 425         .read_link      = genmii_read_link
 426 };
 427
 428 static struct mii_phy_def et1011c_phy_def = {
 429         .phy_id         = 0x0282f000,
 430         .phy_id_mask    = 0x0fffff00,
 431         .name           = "ET1011C Gigabit Ethernet",
 432         .ops            = &et1011c_phy_ops
 433 };
 434
 435
 436
 437
 438
 439 static struct mii_phy_ops m88e1111_phy_ops = {
 440         .init           = m88e1111_init,
 441         .setup_aneg     = genmii_setup_aneg,
 442         .setup_forced   = genmii_setup_forced,
 443         .poll_link      = genmii_poll_link,
 444         .read_link      = genmii_read_link
 445 };
 446
 447 static struct mii_phy_def m88e1111_phy_def = {
 448
 449         .phy_id         = 0x01410CC0,
 450         .phy_id_mask    = 0x0ffffff0,
 451         .name           = "Marvell 88E1111 Ethernet",
 452         .ops            = &m88e1111_phy_ops,
 453 };
 454
 455 static struct mii_phy_ops m88e1112_phy_ops = {
 456         .init           = m88e1112_init,
 457         .setup_aneg     = genmii_setup_aneg,
 458         .setup_forced   = genmii_setup_forced,
 459         .poll_link      = genmii_poll_link,
 460         .read_link      = genmii_read_link
 461 };
 462
 463 static struct mii_phy_def m88e1112_phy_def = {
 464         .phy_id         = 0x01410C90,
 465         .phy_id_mask    = 0x0ffffff0,
 466         .name           = "Marvell 88E1112 Ethernet",
 467         .ops            = &m88e1112_phy_ops,
 468 };
 469
 470 static struct mii_phy_def *mii_phy_table[] = {
 471         &et1011c_phy_def,
 472         &cis8201_phy_def,
 473         &bcm5248_phy_def,
 474         &m88e1111_phy_def,
 475         &m88e1112_phy_def,
 476         &genmii_phy_def,
 477         NULL
 478 };
 479
 480 int emac_mii_phy_probe(struct mii_phy *phy, int address)
 481 {
 482         struct mii_phy_def *def;
 483         int i;
 484         u32 id;
 485
 486         phy->autoneg = AUTONEG_DISABLE;
 487         phy->advertising = 0;
 488         phy->address = address;
 489         phy->speed = SPEED_10;
 490         phy->duplex = DUPLEX_HALF;
 491         phy->pause = phy->asym_pause = 0;
 492
 493         /* Take PHY out of isolate mode and reset it. */
 494         if (emac_mii_reset_phy(phy))
 495                 return -ENODEV;
 496
 497         /* Read ID and find matching entry */
 498         id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
 499         for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
 500                 if ((id & def->phy_id_mask) == def->phy_id)
 501                         break;
 502         /* Should never be NULL (we have a generic entry), but... */
 503         if (!def)
 504                 return -ENODEV;
 505
 506         phy->def = def;
 507
 508         /* Determine PHY features if needed */
 509         phy->features = def->features;
 510         if (!phy->features) {
 511                 u16 bmsr = phy_read(phy, MII_BMSR);
 512                 if (bmsr & BMSR_ANEGCAPABLE)
 513                         phy->features |= SUPPORTED_Autoneg;
 514                 if (bmsr & BMSR_10HALF)
 515                         phy->features |= SUPPORTED_10baseT_Half;
 516                 if (bmsr & BMSR_10FULL)
 517                         phy->features |= SUPPORTED_10baseT_Full;
 518                 if (bmsr & BMSR_100HALF)
 519                         phy->features |= SUPPORTED_100baseT_Half;
 520                 if (bmsr & BMSR_100FULL)
 521                         phy->features |= SUPPORTED_100baseT_Full;
 522                 if (bmsr & BMSR_ESTATEN) {
 523                         u16 esr = phy_read(phy, MII_ESTATUS);
 524                         if (esr & ESTATUS_1000_TFULL)
 525                                 phy->features |= SUPPORTED_1000baseT_Full;
 526                         if (esr & ESTATUS_1000_THALF)
 527                                 phy->features |= SUPPORTED_1000baseT_Half;
 528                 }
 529                 phy->features |= SUPPORTED_MII;
 530         }
 531
 532         /* Setup default advertising */
 533         phy->advertising = phy->features;
 534
 535         return 0;
 536 }
 537
 538 MODULE_LICENSE("GPL");