git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-omap1/board-generic.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-generic.c
   3  *
   4  * Modified from board-innovator1510.c
   5  *
   6  * Code for generic OMAP board. Should work on many OMAP systems where
   7  * the device drivers take care of all the necessary hardware initialization.
   8  * Do not put any board specific code to this file; create a new machine
   9  * type if you need custom low-level initializations.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/init.h>
  18 #include <linux/device.h>
  19
  20 #include <asm/hardware.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/mach/arch.h>
  23 #include <asm/mach/map.h>
  24
  25 #include <asm/arch/gpio.h>
  26 #include <asm/arch/mux.h>
  27 #include <asm/arch/usb.h>
  28 #include <asm/arch/board.h>
  29 #include <asm/arch/common.h>
  30
  31 static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
  32
  33 static void __init omap_generic_init_irq(void)
  34 {
  35         omap_init_irq();
  36 }
  37
  38 /* assume no Mini-AB port */
  39
  40 #ifdef CONFIG_ARCH_OMAP1510
  41 static struct omap_usb_config generic1510_usb_config __initdata = {
  42         .register_host  = 1,
  43         .register_dev   = 1,
  44         .hmc_mode       = 16,
  45         .pins[0]        = 3,
  46 };
  47 #endif
  48
  49 #if defined(CONFIG_ARCH_OMAP16XX)
  50 static struct omap_usb_config generic1610_usb_config __initdata = {
  51         .register_host  = 1,
  52         .register_dev   = 1,
  53         .hmc_mode       = 16,
  54         .pins[0]        = 6,
  55 };
  56 #endif
  57
  58 static struct omap_board_config_kernel generic_config[] = {
  59         { OMAP_TAG_USB,           NULL },
  60 };
  61
  62 static void __init omap_generic_init(void)
  63 {
  64         /*
  65          * Make sure the serial ports are muxed on at this point.
  66          * You have to mux them off in device drivers later on
  67          * if not needed.
  68          */
  69 #ifdef CONFIG_ARCH_OMAP1510
  70         if (cpu_is_omap1510()) {
  71                 generic_config[0].data = &generic1510_usb_config;
  72         }
  73 #endif
  74 #if defined(CONFIG_ARCH_OMAP16XX)
  75         if (!cpu_is_omap1510()) {
  76                 generic_config[0].data = &generic1610_usb_config;
  77         }
  78 #endif
  79         omap_board_config = generic_config;
  80         omap_board_config_size = ARRAY_SIZE(generic_config);
  81         omap_serial_init(generic_serial_ports);
  82 }
  83
  84 static void __init omap_generic_map_io(void)
  85 {
  86         omap_map_common_io()
  87 }
  88
  89 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
  90         /* Maintainer: Tony Lindgren <tony@atomide.com> */
  91         .phys_ram       = 0x10000000,
  92         .phys_io        = 0xfff00000,
  93         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
  94         .boot_params    = 0x10000100,
  95         .map_io         = omap_generic_map_io,
  96         .init_irq       = omap_generic_init_irq,
  97         .init_machine   = omap_generic_init,
  98         .timer          = &omap_timer,
  99 MACHINE_END