git.oblomov.eu Git - linux-2.6/blob - drivers/pci/hotplug/cpqphp_ctrl.c

   1 /*
   2  * Compaq Hot Plug Controller Driver
   3  *
   4  * Copyright (C) 1995,2001 Compaq Computer Corporation
   5  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
   6  * Copyright (C) 2001 IBM Corp.
   7  *
   8  * All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or (at
  13  * your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful, but
  16  * WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  18  * NON INFRINGEMENT.  See the GNU General Public License for more
  19  * details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Send feedback to <greg@kroah.com>
  26  *
  27  */
  28
  29 #include <linux/module.h>
  30 #include <linux/kernel.h>
  31 #include <linux/types.h>
  32 #include <linux/slab.h>
  33 #include <linux/workqueue.h>
  34 #include <linux/interrupt.h>
  35 #include <linux/delay.h>
  36 #include <linux/wait.h>
  37 #include <linux/smp_lock.h>
  38 #include <linux/pci.h>
  39 #include <linux/pci_hotplug.h>
  40 #include "cpqphp.h"
  41
  42 static u32 configure_new_device(struct controller* ctrl, struct pci_func *func,
  43                         u8 behind_bridge, struct resource_lists *resources);
  44 static int configure_new_function(struct controller* ctrl, struct pci_func *func,
  45                         u8 behind_bridge, struct resource_lists *resources);
  46 static void interrupt_event_handler(struct controller *ctrl);
  47
  48 static struct semaphore event_semaphore;        /* mutex for process loop (up if something to process) */
  49 static struct semaphore event_exit;             /* guard ensure thread has exited before calling it quits */
  50 static int event_finished;
  51 static unsigned long pushbutton_pending;        /* = 0 */
  52
  53 /* things needed for the long_delay function */
  54 static struct semaphore         delay_sem;
  55 static wait_queue_head_t        delay_wait;
  56
  57 /* delay is in jiffies to wait for */
  58 static void long_delay(int delay)
  59 {
  60         DECLARE_WAITQUEUE(wait, current);
  61
  62         /* only allow 1 customer into the delay queue at once
  63          * yes this makes some people wait even longer, but who really cares?
  64          * this is for _huge_ delays to make the hardware happy as the
  65          * signals bounce around
  66          */
  67         down (&delay_sem);
  68
  69         init_waitqueue_head(&delay_wait);
  70
  71         add_wait_queue(&delay_wait, &wait);
  72         msleep_interruptible(jiffies_to_msecs(delay));
  73         remove_wait_queue(&delay_wait, &wait);
  74
  75         up(&delay_sem);
  76 }
  77
  78
  79 /* FIXME: The following line needs to be somewhere else... */
  80 #define WRONG_BUS_FREQUENCY 0x07
  81 static u8 handle_switch_change(u8 change, struct controller * ctrl)
  82 {
  83         int hp_slot;
  84         u8 rc = 0;
  85         u16 temp_word;
  86         struct pci_func *func;
  87         struct event_info *taskInfo;
  88
  89         if (!change)
  90                 return 0;
  91
  92         /* Switch Change */
  93         dbg("cpqsbd:  Switch interrupt received.\n");
  94
  95         for (hp_slot = 0; hp_slot < 6; hp_slot++) {
  96                 if (change & (0x1L << hp_slot)) {
  97                         /**********************************
  98                          * this one changed.
  99                          **********************************/
 100                         func = cpqhp_slot_find(ctrl->bus,
 101                                 (hp_slot + ctrl->slot_device_offset), 0);
 102
 103                         /* this is the structure that tells the worker thread
 104                          *what to do */
 105                         taskInfo = &(ctrl->event_queue[ctrl->next_event]);
 106                         ctrl->next_event = (ctrl->next_event + 1) % 10;
 107                         taskInfo->hp_slot = hp_slot;
 108
 109                         rc++;
 110
 111                         temp_word = ctrl->ctrl_int_comp >> 16;
 112                         func->presence_save = (temp_word >> hp_slot) & 0x01;
 113                         func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
 114
 115                         if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
 116                                 /**********************************
 117                                  * Switch opened
 118                                  **********************************/
 119
 120                                 func->switch_save = 0;
 121
 122                                 taskInfo->event_type = INT_SWITCH_OPEN;
 123                         } else {
 124                                 /**********************************
 125                                  * Switch closed
 126                                  **********************************/
 127
 128                                 func->switch_save = 0x10;
 129
 130                                 taskInfo->event_type = INT_SWITCH_CLOSE;
 131                         }
 132                 }
 133         }
 134
 135         return rc;
 136 }
 137
 138 /**
 139  * cpqhp_find_slot: find the struct slot of given device
 140  * @ctrl: scan lots of this controller
 141  * @device: the device id to find
 142  */
 143 static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device)
 144 {
 145         struct slot *slot = ctrl->slot;
 146
 147         while (slot && (slot->device != device)) {
 148                 slot = slot->next;
 149         }
 150
 151         return slot;
 152 }
 153
 154
 155 static u8 handle_presence_change(u16 change, struct controller * ctrl)
 156 {
 157         int hp_slot;
 158         u8 rc = 0;
 159         u8 temp_byte;
 160         u16 temp_word;
 161         struct pci_func *func;
 162         struct event_info *taskInfo;
 163         struct slot *p_slot;
 164
 165         if (!change)
 166                 return 0;
 167
 168         /**********************************
 169          * Presence Change
 170          **********************************/
 171         dbg("cpqsbd:  Presence/Notify input change.\n");
 172         dbg("         Changed bits are 0x%4.4x\n", change );
 173
 174         for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 175                 if (change & (0x0101 << hp_slot)) {
 176                         /**********************************
 177                          * this one changed.
 178                          **********************************/
 179                         func = cpqhp_slot_find(ctrl->bus,
 180                                 (hp_slot + ctrl->slot_device_offset), 0);
 181
 182                         taskInfo = &(ctrl->event_queue[ctrl->next_event]);
 183                         ctrl->next_event = (ctrl->next_event + 1) % 10;
 184                         taskInfo->hp_slot = hp_slot;
 185
 186                         rc++;
 187
 188                         p_slot = cpqhp_find_slot(ctrl, hp_slot + (readb(ctrl->hpc_reg + SLOT_MASK) >> 4));
 189                         if (!p_slot)
 190                                 return 0;
 191
 192                         /* If the switch closed, must be a button
 193                          * If not in button mode, nevermind */
 194                         if (func->switch_save && (ctrl->push_button == 1)) {
 195                                 temp_word = ctrl->ctrl_int_comp >> 16;
 196                                 temp_byte = (temp_word >> hp_slot) & 0x01;
 197                                 temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02;
 198
 199                                 if (temp_byte != func->presence_save) {
 200                                         /**************************************
 201                                          * button Pressed (doesn't do anything)
 202                                          **************************************/
 203                                         dbg("hp_slot %d button pressed\n", hp_slot);
 204                                         taskInfo->event_type = INT_BUTTON_PRESS;
 205                                 } else {
 206                                         /**********************************
 207                                          * button Released - TAKE ACTION!!!!
 208                                          **********************************/
 209                                         dbg("hp_slot %d button released\n", hp_slot);
 210                                         taskInfo->event_type = INT_BUTTON_RELEASE;
 211
 212                                         /* Cancel if we are still blinking */
 213                                         if ((p_slot->state == BLINKINGON_STATE)
 214                                             || (p_slot->state == BLINKINGOFF_STATE)) {
 215                                                 taskInfo->event_type = INT_BUTTON_CANCEL;
 216                                                 dbg("hp_slot %d button cancel\n", hp_slot);
 217                                         } else if ((p_slot->state == POWERON_STATE)
 218                                                    || (p_slot->state == POWEROFF_STATE)) {
 219                                                 /* info(msg_button_ignore, p_slot->number); */
 220                                                 taskInfo->event_type = INT_BUTTON_IGNORE;
 221                                                 dbg("hp_slot %d button ignore\n", hp_slot);
 222                                         }
 223                                 }
 224                         } else {
 225                                 /* Switch is open, assume a presence change
 226                                  * Save the presence state */
 227                                 temp_word = ctrl->ctrl_int_comp >> 16;
 228                                 func->presence_save = (temp_word >> hp_slot) & 0x01;
 229                                 func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
 230
 231                                 if ((!(ctrl->ctrl_int_comp & (0x010000 << hp_slot))) ||
 232                                     (!(ctrl->ctrl_int_comp & (0x01000000 << hp_slot)))) {
 233                                         /* Present */
 234                                         taskInfo->event_type = INT_PRESENCE_ON;
 235                                 } else {
 236                                         /* Not Present */
 237                                         taskInfo->event_type = INT_PRESENCE_OFF;
 238                                 }
 239                         }
 240                 }
 241         }
 242
 243         return rc;
 244 }
 245
 246
 247 static u8 handle_power_fault(u8 change, struct controller * ctrl)
 248 {
 249         int hp_slot;
 250         u8 rc = 0;
 251         struct pci_func *func;
 252         struct event_info *taskInfo;
 253
 254         if (!change)
 255                 return 0;
 256
 257         /**********************************
 258          * power fault
 259          **********************************/
 260
 261         info("power fault interrupt\n");
 262
 263         for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 264                 if (change & (0x01 << hp_slot)) {
 265                         /**********************************
 266                          * this one changed.
 267                          **********************************/
 268                         func = cpqhp_slot_find(ctrl->bus,
 269                                 (hp_slot + ctrl->slot_device_offset), 0);
 270
 271                         taskInfo = &(ctrl->event_queue[ctrl->next_event]);
 272                         ctrl->next_event = (ctrl->next_event + 1) % 10;
 273                         taskInfo->hp_slot = hp_slot;
 274
 275                         rc++;
 276
 277                         if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) {
 278                                 /**********************************
 279                                  * power fault Cleared
 280                                  **********************************/
 281                                 func->status = 0x00;
 282
 283                                 taskInfo->event_type = INT_POWER_FAULT_CLEAR;
 284                         } else {
 285                                 /**********************************
 286                                  * power fault
 287                                  **********************************/
 288                                 taskInfo->event_type = INT_POWER_FAULT;
 289
 290                                 if (ctrl->rev < 4) {
 291                                         amber_LED_on (ctrl, hp_slot);
 292                                         green_LED_off (ctrl, hp_slot);
 293                                         set_SOGO (ctrl);
 294
 295                                         /* this is a fatal condition, we want
 296                                          * to crash the machine to protect from
 297                                          * data corruption. simulated_NMI
 298                                          * shouldn't ever return */
 299                                         /* FIXME
 300                                         simulated_NMI(hp_slot, ctrl); */
 301
 302                                         /* The following code causes a software
 303                                          * crash just in case simulated_NMI did
 304                                          * return */
 305                                         /*FIXME
 306                                         panic(msg_power_fault); */
 307                                 } else {
 308                                         /* set power fault status for this board */
 309                                         func->status = 0xFF;
 310                                         info("power fault bit %x set\n", hp_slot);
 311                                 }
 312                         }
 313                 }
 314         }
 315
 316         return rc;
 317 }
 318
 319
 320 /**
 321  * sort_by_size: sort nodes on the list by their length, smallest first.
 322  * @head: list to sort
 323  *
 324  */
 325 static int sort_by_size(struct pci_resource **head)
 326 {
 327         struct pci_resource *current_res;
 328         struct pci_resource *next_res;
 329         int out_of_order = 1;
 330
 331         if (!(*head))
 332                 return 1;
 333
 334         if (!((*head)->next))
 335                 return 0;
 336
 337         while (out_of_order) {
 338                 out_of_order = 0;
 339
 340                 /* Special case for swapping list head */
 341                 if (((*head)->next) &&
 342                     ((*head)->length > (*head)->next->length)) {
 343                         out_of_order++;
 344                         current_res = *head;
 345                         *head = (*head)->next;
 346                         current_res->next = (*head)->next;
 347                         (*head)->next = current_res;
 348                 }
 349
 350                 current_res = *head;
 351
 352                 while (current_res->next && current_res->next->next) {
 353                         if (current_res->next->length > current_res->next->next->length) {
 354                                 out_of_order++;
 355                                 next_res = current_res->next;
 356                                 current_res->next = current_res->next->next;
 357                                 current_res = current_res->next;
 358                                 next_res->next = current_res->next;
 359                                 current_res->next = next_res;
 360                         } else
 361                                 current_res = current_res->next;
 362                 }
 363         }  /* End of out_of_order loop */
 364
 365         return 0;
 366 }
 367
 368
 369 /**
 370  * sort_by_max_size: sort nodes on the list by their length, largest first.
 371  * @head: list to sort
 372  *
 373  */
 374 static int sort_by_max_size(struct pci_resource **head)
 375 {
 376         struct pci_resource *current_res;
 377         struct pci_resource *next_res;
 378         int out_of_order = 1;
 379
 380         if (!(*head))
 381                 return 1;
 382
 383         if (!((*head)->next))
 384                 return 0;
 385
 386         while (out_of_order) {
 387                 out_of_order = 0;
 388
 389                 /* Special case for swapping list head */
 390                 if (((*head)->next) &&
 391                     ((*head)->length < (*head)->next->length)) {
 392                         out_of_order++;
 393                         current_res = *head;
 394                         *head = (*head)->next;
 395                         current_res->next = (*head)->next;
 396                         (*head)->next = current_res;
 397                 }
 398
 399                 current_res = *head;
 400
 401                 while (current_res->next && current_res->next->next) {
 402                         if (current_res->next->length < current_res->next->next->length) {
 403                                 out_of_order++;
 404                                 next_res = current_res->next;
 405                                 current_res->next = current_res->next->next;
 406                                 current_res = current_res->next;
 407                                 next_res->next = current_res->next;
 408                                 current_res->next = next_res;
 409                         } else
 410                                 current_res = current_res->next;
 411                 }
 412         }  /* End of out_of_order loop */
 413
 414         return 0;
 415 }
 416
 417
 418 /**
 419  * do_pre_bridge_resource_split: find node of resources that are unused
 420  *
 421  */
 422 static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **head,
 423                                 struct pci_resource **orig_head, u32 alignment)
 424 {
 425         struct pci_resource *prevnode = NULL;
 426         struct pci_resource *node;
 427         struct pci_resource *split_node;
 428         u32 rc;
 429         u32 temp_dword;
 430         dbg("do_pre_bridge_resource_split\n");
 431
 432         if (!(*head) || !(*orig_head))
 433                 return NULL;
 434
 435         rc = cpqhp_resource_sort_and_combine(head);
 436
 437         if (rc)
 438                 return NULL;
 439
 440         if ((*head)->base != (*orig_head)->base)
 441                 return NULL;
 442
 443         if ((*head)->length == (*orig_head)->length)
 444                 return NULL;
 445
 446
 447         /* If we got here, there the bridge requires some of the resource, but
 448          * we may be able to split some off of the front */
 449
 450         node = *head;
 451
 452         if (node->length & (alignment -1)) {
 453                 /* this one isn't an aligned length, so we'll make a new entry
 454                  * and split it up. */
 455                 split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 456
 457                 if (!split_node)
 458                         return NULL;
 459
 460                 temp_dword = (node->length | (alignment-1)) + 1 - alignment;
 461
 462                 split_node->base = node->base;
 463                 split_node->length = temp_dword;
 464
 465                 node->length -= temp_dword;
 466                 node->base += split_node->length;
 467
 468                 /* Put it in the list */
 469                 *head = split_node;
 470                 split_node->next = node;
 471         }
 472
 473         if (node->length < alignment)
 474                 return NULL;
 475
 476         /* Now unlink it */
 477         if (*head == node) {
 478                 *head = node->next;
 479         } else {
 480                 prevnode = *head;
 481                 while (prevnode->next != node)
 482                         prevnode = prevnode->next;
 483
 484                 prevnode->next = node->next;
 485         }
 486         node->next = NULL;
 487
 488         return node;
 489 }
 490
 491
 492 /**
 493  * do_bridge_resource_split: find one node of resources that aren't in use
 494  *
 495  */
 496 static struct pci_resource *do_bridge_resource_split(struct pci_resource **head, u32 alignment)
 497 {
 498         struct pci_resource *prevnode = NULL;
 499         struct pci_resource *node;
 500         u32 rc;
 501         u32 temp_dword;
 502
 503         rc = cpqhp_resource_sort_and_combine(head);
 504
 505         if (rc)
 506                 return NULL;
 507
 508         node = *head;
 509
 510         while (node->next) {
 511                 prevnode = node;
 512                 node = node->next;
 513                 kfree(prevnode);
 514         }
 515
 516         if (node->length < alignment)
 517                 goto error;
 518
 519         if (node->base & (alignment - 1)) {
 520                 /* Short circuit if adjusted size is too small */
 521                 temp_dword = (node->base | (alignment-1)) + 1;
 522                 if ((node->length - (temp_dword - node->base)) < alignment)
 523                         goto error;
 524
 525                 node->length -= (temp_dword - node->base);
 526                 node->base = temp_dword;
 527         }
 528
 529         if (node->length & (alignment - 1))
 530                 /* There's stuff in use after this node */
 531                 goto error;
 532
 533         return node;
 534 error:
 535         kfree(node);
 536         return NULL;
 537 }
 538
 539
 540 /**
 541  * get_io_resource: find first node of given size not in ISA aliasing window.
 542  * @head: list to search
 543  * @size: size of node to find, must be a power of two.
 544  *
 545  * Description: this function sorts the resource list by size and then returns
 546  * returns the first node of "size" length that is not in the ISA aliasing
 547  * window.  If it finds a node larger than "size" it will split it up.
 548  *
 549  */
 550 static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size)
 551 {
 552         struct pci_resource *prevnode;
 553         struct pci_resource *node;
 554         struct pci_resource *split_node;
 555         u32 temp_dword;
 556
 557         if (!(*head))
 558                 return NULL;
 559
 560         if ( cpqhp_resource_sort_and_combine(head) )
 561                 return NULL;
 562
 563         if ( sort_by_size(head) )
 564                 return NULL;
 565
 566         for (node = *head; node; node = node->next) {
 567                 if (node->length < size)
 568                         continue;
 569
 570                 if (node->base & (size - 1)) {
 571                         /* this one isn't base aligned properly
 572                          * so we'll make a new entry and split it up */
 573                         temp_dword = (node->base | (size-1)) + 1;
 574
 575                         /* Short circuit if adjusted size is too small */
 576                         if ((node->length - (temp_dword - node->base)) < size)
 577                                 continue;
 578
 579                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 580
 581                         if (!split_node)
 582                                 return NULL;
 583
 584                         split_node->base = node->base;
 585                         split_node->length = temp_dword - node->base;
 586                         node->base = temp_dword;
 587                         node->length -= split_node->length;
 588
 589                         /* Put it in the list */
 590                         split_node->next = node->next;
 591                         node->next = split_node;
 592                 } /* End of non-aligned base */
 593
 594                 /* Don't need to check if too small since we already did */
 595                 if (node->length > size) {
 596                         /* this one is longer than we need
 597                          * so we'll make a new entry and split it up */
 598                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 599
 600                         if (!split_node)
 601                                 return NULL;
 602
 603                         split_node->base = node->base + size;
 604                         split_node->length = node->length - size;
 605                         node->length = size;
 606
 607                         /* Put it in the list */
 608                         split_node->next = node->next;
 609                         node->next = split_node;
 610                 }  /* End of too big on top end */
 611
 612                 /* For IO make sure it's not in the ISA aliasing space */
 613                 if (node->base & 0x300L)
 614                         continue;
 615
 616                 /* If we got here, then it is the right size
 617                  * Now take it out of the list and break */
 618                 if (*head == node) {
 619                         *head = node->next;
 620                 } else {
 621                         prevnode = *head;
 622                         while (prevnode->next != node)
 623                                 prevnode = prevnode->next;
 624
 625                         prevnode->next = node->next;
 626                 }
 627                 node->next = NULL;
 628                 break;
 629         }
 630
 631         return node;
 632 }
 633
 634
 635 /**
 636  * get_max_resource: get largest node which has at least the given size.
 637  * @head: the list to search the node in
 638  * @size: the minimum size of the node to find
 639  *
 640  * Description: Gets the largest node that is at least "size" big from the
 641  * list pointed to by head.  It aligns the node on top and bottom
 642  * to "size" alignment before returning it.
 643  */
 644 static struct pci_resource *get_max_resource(struct pci_resource **head, u32 size)
 645 {
 646         struct pci_resource *max;
 647         struct pci_resource *temp;
 648         struct pci_resource *split_node;
 649         u32 temp_dword;
 650
 651         if (cpqhp_resource_sort_and_combine(head))
 652                 return NULL;
 653
 654         if (sort_by_max_size(head))
 655                 return NULL;
 656
 657         for (max = *head; max; max = max->next) {
 658                 /* If not big enough we could probably just bail,
 659                  * instead we'll continue to the next. */
 660                 if (max->length < size)
 661                         continue;
 662
 663                 if (max->base & (size - 1)) {
 664                         /* this one isn't base aligned properly
 665                          * so we'll make a new entry and split it up */
 666                         temp_dword = (max->base | (size-1)) + 1;
 667
 668                         /* Short circuit if adjusted size is too small */
 669                         if ((max->length - (temp_dword - max->base)) < size)
 670                                 continue;
 671
 672                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 673
 674                         if (!split_node)
 675                                 return NULL;
 676
 677                         split_node->base = max->base;
 678                         split_node->length = temp_dword - max->base;
 679                         max->base = temp_dword;
 680                         max->length -= split_node->length;
 681
 682                         split_node->next = max->next;
 683                         max->next = split_node;
 684                 }
 685
 686                 if ((max->base + max->length) & (size - 1)) {
 687                         /* this one isn't end aligned properly at the top
 688                          * so we'll make a new entry and split it up */
 689                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 690
 691                         if (!split_node)
 692                                 return NULL;
 693                         temp_dword = ((max->base + max->length) & ~(size - 1));
 694                         split_node->base = temp_dword;
 695                         split_node->length = max->length + max->base
 696                                              - split_node->base;
 697                         max->length -= split_node->length;
 698
 699                         split_node->next = max->next;
 700                         max->next = split_node;
 701                 }
 702
 703                 /* Make sure it didn't shrink too much when we aligned it */
 704                 if (max->length < size)
 705                         continue;
 706
 707                 /* Now take it out of the list */
 708                 temp = *head;
 709                 if (temp == max) {
 710                         *head = max->next;
 711                 } else {
 712                         while (temp && temp->next != max) {
 713                                 temp = temp->next;
 714                         }
 715
 716                         temp->next = max->next;
 717                 }
 718
 719                 max->next = NULL;
 720                 break;
 721         }
 722
 723         return max;
 724 }
 725
 726
 727 /**
 728  * get_resource: find resource of given size and split up larger ones.
 729  * @head: the list to search for resources
 730  * @size: the size limit to use
 731  *
 732  * Description: This function sorts the resource list by size and then
 733  * returns the first node of "size" length.  If it finds a node
 734  * larger than "size" it will split it up.
 735  *
 736  * size must be a power of two.
 737  */
 738 static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
 739 {
 740         struct pci_resource *prevnode;
 741         struct pci_resource *node;
 742         struct pci_resource *split_node;
 743         u32 temp_dword;
 744
 745         if (cpqhp_resource_sort_and_combine(head))
 746                 return NULL;
 747
 748         if (sort_by_size(head))
 749                 return NULL;
 750
 751         for (node = *head; node; node = node->next) {
 752                 dbg("%s: req_size =%x node=%p, base=%x, length=%x\n",
 753                     __FUNCTION__, size, node, node->base, node->length);
 754                 if (node->length < size)
 755                         continue;
 756
 757                 if (node->base & (size - 1)) {
 758                         dbg("%s: not aligned\n", __FUNCTION__);
 759                         /* this one isn't base aligned properly
 760                          * so we'll make a new entry and split it up */
 761                         temp_dword = (node->base | (size-1)) + 1;
 762
 763                         /* Short circuit if adjusted size is too small */
 764                         if ((node->length - (temp_dword - node->base)) < size)
 765                                 continue;
 766
 767                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 768
 769                         if (!split_node)
 770                                 return NULL;
 771
 772                         split_node->base = node->base;
 773                         split_node->length = temp_dword - node->base;
 774                         node->base = temp_dword;
 775                         node->length -= split_node->length;
 776
 777                         split_node->next = node->next;
 778                         node->next = split_node;
 779                 } /* End of non-aligned base */
 780
 781                 /* Don't need to check if too small since we already did */
 782                 if (node->length > size) {
 783                         dbg("%s: too big\n", __FUNCTION__);
 784                         /* this one is longer than we need
 785                          * so we'll make a new entry and split it up */
 786                         split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 787
 788                         if (!split_node)
 789                                 return NULL;
 790
 791                         split_node->base = node->base + size;
 792                         split_node->length = node->length - size;
 793                         node->length = size;
 794
 795                         /* Put it in the list */
 796                         split_node->next = node->next;
 797                         node->next = split_node;
 798                 }  /* End of too big on top end */
 799
 800                 dbg("%s: got one!!!\n", __FUNCTION__);
 801                 /* If we got here, then it is the right size
 802                  * Now take it out of the list */
 803                 if (*head == node) {
 804                         *head = node->next;
 805                 } else {
 806                         prevnode = *head;
 807                         while (prevnode->next != node)
 808                                 prevnode = prevnode->next;
 809
 810                         prevnode->next = node->next;
 811                 }
 812                 node->next = NULL;
 813                 break;
 814         }
 815         return node;
 816 }
 817
 818
 819 /**
 820  * cpqhp_resource_sort_and_combine: sort nodes by base addresses and clean up.
 821  * @head: the list to sort and clean up
 822  *
 823  * Description: Sorts all of the nodes in the list in ascending order by
 824  * their base addresses.  Also does garbage collection by
 825  * combining adjacent nodes.
 826  *
 827  * returns 0 if success
 828  */
 829 int cpqhp_resource_sort_and_combine(struct pci_resource **head)
 830 {
 831         struct pci_resource *node1;
 832         struct pci_resource *node2;
 833         int out_of_order = 1;
 834
 835         dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head);
 836
 837         if (!(*head))
 838                 return 1;
 839
 840         dbg("*head->next = %p\n",(*head)->next);
 841
 842         if (!(*head)->next)
 843                 return 0;       /* only one item on the list, already sorted! */
 844
 845         dbg("*head->base = 0x%x\n",(*head)->base);
 846         dbg("*head->next->base = 0x%x\n",(*head)->next->base);
 847         while (out_of_order) {
 848                 out_of_order = 0;
 849
 850                 /* Special case for swapping list head */
 851                 if (((*head)->next) &&
 852                     ((*head)->base > (*head)->next->base)) {
 853                         node1 = *head;
 854                         (*head) = (*head)->next;
 855                         node1->next = (*head)->next;
 856                         (*head)->next = node1;
 857                         out_of_order++;
 858                 }
 859
 860                 node1 = (*head);
 861
 862                 while (node1->next && node1->next->next) {
 863                         if (node1->next->base > node1->next->next->base) {
 864                                 out_of_order++;
 865                                 node2 = node1->next;
 866                                 node1->next = node1->next->next;
 867                                 node1 = node1->next;
 868                                 node2->next = node1->next;
 869                                 node1->next = node2;
 870                         } else
 871                                 node1 = node1->next;
 872                 }
 873         }  /* End of out_of_order loop */
 874
 875         node1 = *head;
 876
 877         while (node1 && node1->next) {
 878                 if ((node1->base + node1->length) == node1->next->base) {
 879                         /* Combine */
 880                         dbg("8..\n");
 881                         node1->length += node1->next->length;
 882                         node2 = node1->next;
 883                         node1->next = node1->next->next;
 884                         kfree(node2);
 885                 } else
 886                         node1 = node1->next;
 887         }
 888
 889         return 0;
 890 }
 891
 892
 893 irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data)
 894 {
 895         struct controller *ctrl = data;
 896         u8 schedule_flag = 0;
 897         u8 reset;
 898         u16 misc;
 899         u32 Diff;
 900         u32 temp_dword;
 901
 902
 903         misc = readw(ctrl->hpc_reg + MISC);
 904         /***************************************
 905          * Check to see if it was our interrupt
 906          ***************************************/
 907         if (!(misc & 0x000C)) {
 908                 return IRQ_NONE;
 909         }
 910
 911         if (misc & 0x0004) {
 912                 /**********************************
 913                  * Serial Output interrupt Pending
 914                  **********************************/
 915
 916                 /* Clear the interrupt */
 917                 misc |= 0x0004;
 918                 writew(misc, ctrl->hpc_reg + MISC);
 919
 920                 /* Read to clear posted writes */
 921                 misc = readw(ctrl->hpc_reg + MISC);
 922
 923                 dbg ("%s - waking up\n", __FUNCTION__);
 924                 wake_up_interruptible(&ctrl->queue);
 925         }
 926
 927         if (misc & 0x0008) {
 928                 /* General-interrupt-input interrupt Pending */
 929                 Diff = readl(ctrl->hpc_reg + INT_INPUT_CLEAR) ^ ctrl->ctrl_int_comp;
 930
 931                 ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
 932
 933                 /* Clear the interrupt */
 934                 writel(Diff, ctrl->hpc_reg + INT_INPUT_CLEAR);
 935
 936                 /* Read it back to clear any posted writes */
 937                 temp_dword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
 938
 939                 if (!Diff)
 940                         /* Clear all interrupts */
 941                         writel(0xFFFFFFFF, ctrl->hpc_reg + INT_INPUT_CLEAR);
 942
 943                 schedule_flag += handle_switch_change((u8)(Diff & 0xFFL), ctrl);
 944                 schedule_flag += handle_presence_change((u16)((Diff & 0xFFFF0000L) >> 16), ctrl);
 945                 schedule_flag += handle_power_fault((u8)((Diff & 0xFF00L) >> 8), ctrl);
 946         }
 947
 948         reset = readb(ctrl->hpc_reg + RESET_FREQ_MODE);
 949         if (reset & 0x40) {
 950                 /* Bus reset has completed */
 951                 reset &= 0xCF;
 952                 writeb(reset, ctrl->hpc_reg + RESET_FREQ_MODE);
 953                 reset = readb(ctrl->hpc_reg + RESET_FREQ_MODE);
 954                 wake_up_interruptible(&ctrl->queue);
 955         }
 956
 957         if (schedule_flag) {
 958                 up(&event_semaphore);
 959                 dbg("Signal event_semaphore\n");
 960         }
 961         return IRQ_HANDLED;
 962 }
 963
 964
 965 /**
 966  * cpqhp_slot_create - Creates a node and adds it to the proper bus.
 967  * @busnumber - bus where new node is to be located
 968  *
 969  * Returns pointer to the new node or NULL if unsuccessful
 970  */
 971 struct pci_func *cpqhp_slot_create(u8 busnumber)
 972 {
 973         struct pci_func *new_slot;
 974         struct pci_func *next;
 975
 976         new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL);
 977
 978         if (new_slot == NULL) {
 979                 /* I'm not dead yet!
 980                  * You will be. */
 981                 return new_slot;
 982         }
 983
 984         memset(new_slot, 0, sizeof(struct pci_func));
 985
 986         new_slot->next = NULL;
 987         new_slot->configured = 1;
 988
 989         if (cpqhp_slot_list[busnumber] == NULL) {
 990                 cpqhp_slot_list[busnumber] = new_slot;
 991         } else {
 992                 next = cpqhp_slot_list[busnumber];
 993                 while (next->next != NULL)
 994                         next = next->next;
 995                 next->next = new_slot;
 996         }
 997         return new_slot;
 998 }
 999
1000
1001 /**
1002  * slot_remove - Removes a node from the linked list of slots.
1003  * @old_slot: slot to remove
1004  *
1005  * Returns 0 if successful, !0 otherwise.
1006  */
1007 static int slot_remove(struct pci_func * old_slot)
1008 {
1009         struct pci_func *next;
1010
1011         if (old_slot == NULL)
1012                 return 1;
1013
1014         next = cpqhp_slot_list[old_slot->bus];
1015
1016         if (next == NULL) {
1017                 return 1;
1018         }
1019
1020         if (next == old_slot) {
1021                 cpqhp_slot_list[old_slot->bus] = old_slot->next;
1022                 cpqhp_destroy_board_resources(old_slot);
1023                 kfree(old_slot);
1024                 return 0;
1025         }
1026
1027         while ((next->next != old_slot) && (next->next != NULL)) {
1028                 next = next->next;
1029         }
1030
1031         if (next->next == old_slot) {
1032                 next->next = old_slot->next;
1033                 cpqhp_destroy_board_resources(old_slot);
1034                 kfree(old_slot);
1035                 return 0;
1036         } else
1037                 return 2;
1038 }
1039
1040
1041 /**
1042  * bridge_slot_remove - Removes a node from the linked list of slots.
1043  * @bridge: bridge to remove
1044  *
1045  * Returns 0 if successful, !0 otherwise.
1046  */
1047 static int bridge_slot_remove(struct pci_func *bridge)
1048 {
1049         u8 subordinateBus, secondaryBus;
1050         u8 tempBus;
1051         struct pci_func *next;
1052
1053         secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF;
1054         subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF;
1055
1056         for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
1057                 next = cpqhp_slot_list[tempBus];
1058
1059                 while (!slot_remove(next)) {
1060                         next = cpqhp_slot_list[tempBus];
1061                 }
1062         }
1063
1064         next = cpqhp_slot_list[bridge->bus];
1065
1066         if (next == NULL)
1067                 return 1;
1068
1069         if (next == bridge) {
1070                 cpqhp_slot_list[bridge->bus] = bridge->next;
1071                 goto out;
1072         }
1073
1074         while ((next->next != bridge) && (next->next != NULL))
1075                 next = next->next;
1076
1077         if (next->next != bridge)
1078                 return 2;
1079         next->next = bridge->next;
1080 out:
1081         kfree(bridge);
1082         return 0;
1083 }
1084
1085
1086 /**
1087  * cpqhp_slot_find - Looks for a node by bus, and device, multiple functions accessed
1088  * @bus: bus to find
1089  * @device: device to find
1090  * @index: is 0 for first function found, 1 for the second...
1091  *
1092  * Returns pointer to the node if successful, %NULL otherwise.
1093  */
1094 struct pci_func *cpqhp_slot_find(u8 bus, u8 device, u8 index)
1095 {
1096         int found = -1;
1097         struct pci_func *func;
1098
1099         func = cpqhp_slot_list[bus];
1100
1101         if ((func == NULL) || ((func->device == device) && (index == 0)))
1102                 return func;
1103
1104         if (func->device == device)
1105                 found++;
1106
1107         while (func->next != NULL) {
1108                 func = func->next;
1109
1110                 if (func->device == device)
1111                         found++;
1112
1113                 if (found == index)
1114                         return func;
1115         }
1116
1117         return NULL;
1118 }
1119
1120
1121 /* DJZ: I don't think is_bridge will work as is.
1122  * FIXME */
1123 static int is_bridge(struct pci_func * func)
1124 {
1125         /* Check the header type */
1126         if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01)
1127                 return 1;
1128         else
1129                 return 0;
1130 }
1131
1132
1133 /**
1134  * set_controller_speed - set the frequency and/or mode of a specific
1135  * controller segment.
1136  *
1137  * @ctrl: controller to change frequency/mode for.
1138  * @adapter_speed: the speed of the adapter we want to match.
1139  * @hp_slot: the slot number where the adapter is installed.
1140  *
1141  * Returns 0 if we successfully change frequency and/or mode to match the
1142  * adapter speed.
1143  *
1144  */
1145 static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
1146 {
1147         struct slot *slot;
1148         u8 reg;
1149         u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
1150         u16 reg16;
1151         u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
1152
1153         if (ctrl->speed == adapter_speed)
1154                 return 0;
1155
1156         /* We don't allow freq/mode changes if we find another adapter running
1157          * in another slot on this controller */
1158         for(slot = ctrl->slot; slot; slot = slot->next) {
1159                 if (slot->device == (hp_slot + ctrl->slot_device_offset))
1160                         continue;
1161                 if (!slot->hotplug_slot && !slot->hotplug_slot->info)
1162                         continue;
1163                 if (slot->hotplug_slot->info->adapter_status == 0)
1164                         continue;
1165                 /* If another adapter is running on the same segment but at a
1166                  * lower speed/mode, we allow the new adapter to function at
1167                  * this rate if supported */
1168                 if (ctrl->speed < adapter_speed)
1169                         return 0;
1170
1171                 return 1;
1172         }
1173
1174         /* If the controller doesn't support freq/mode changes and the
1175          * controller is running at a higher mode, we bail */
1176         if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
1177                 return 1;
1178
1179         /* But we allow the adapter to run at a lower rate if possible */
1180         if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
1181                 return 0;
1182
1183         /* We try to set the max speed supported by both the adapter and
1184          * controller */
1185         if (ctrl->speed_capability < adapter_speed) {
1186                 if (ctrl->speed == ctrl->speed_capability)
1187                         return 0;
1188                 adapter_speed = ctrl->speed_capability;
1189         }
1190
1191         writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
1192         writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE);
1193
1194         set_SOGO(ctrl);
1195         wait_for_ctrl_irq(ctrl);
1196
1197         if (adapter_speed != PCI_SPEED_133MHz_PCIX)
1198                 reg = 0xF5;
1199         else
1200                 reg = 0xF4;
1201         pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
1202
1203         reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ);
1204         reg16 &= ~0x000F;
1205         switch(adapter_speed) {
1206                 case(PCI_SPEED_133MHz_PCIX):
1207                         reg = 0x75;
1208                         reg16 |= 0xB;
1209                         break;
1210                 case(PCI_SPEED_100MHz_PCIX):
1211                         reg = 0x74;
1212                         reg16 |= 0xA;
1213                         break;
1214                 case(PCI_SPEED_66MHz_PCIX):
1215                         reg = 0x73;
1216                         reg16 |= 0x9;
1217                         break;
1218                 case(PCI_SPEED_66MHz):
1219                         reg = 0x73;
1220                         reg16 |= 0x1;
1221                         break;
1222                 default: /* 33MHz PCI 2.2 */
1223                         reg = 0x71;
1224                         break;
1225
1226         }
1227         reg16 |= 0xB << 12;
1228         writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ);
1229
1230         mdelay(5);
1231
1232         /* Reenable interrupts */
1233         writel(0, ctrl->hpc_reg + INT_MASK);
1234
1235         pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
1236
1237         /* Restart state machine */
1238         reg = ~0xF;
1239         pci_read_config_byte(ctrl->pci_dev, 0x43, &reg);
1240         pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
1241
1242         /* Only if mode change...*/
1243         if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
1244                 ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
1245                         set_SOGO(ctrl);
1246
1247         wait_for_ctrl_irq(ctrl);
1248         mdelay(1100);
1249
1250         /* Restore LED/Slot state */
1251         writel(leds, ctrl->hpc_reg + LED_CONTROL);
1252         writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE);
1253
1254         set_SOGO(ctrl);
1255         wait_for_ctrl_irq(ctrl);
1256
1257         ctrl->speed = adapter_speed;
1258         slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
1259
1260         info("Successfully changed frequency/mode for adapter in slot %d\n",
1261                         slot->number);
1262         return 0;
1263 }
1264
1265 /* the following routines constitute the bulk of the
1266    hotplug controller logic
1267  */
1268
1269
1270 /**
1271  * board_replaced - Called after a board has been replaced in the system.
1272  *
1273  * This is only used if we don't have resources for hot add
1274  * Turns power on for the board
1275  * Checks to see if board is the same
1276  * If board is same, reconfigures it
1277  * If board isn't same, turns it back off.
1278  *
1279  */
1280 static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
1281 {
1282         u8 hp_slot;
1283         u8 temp_byte;
1284         u8 adapter_speed;
1285         u32 rc = 0;
1286
1287         hp_slot = func->device - ctrl->slot_device_offset;
1288
1289         if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) {
1290                 /**********************************
1291                  * The switch is open.
1292                  **********************************/
1293                 rc = INTERLOCK_OPEN;
1294         } else if (is_slot_enabled (ctrl, hp_slot)) {
1295                 /**********************************
1296                  * The board is already on
1297                  **********************************/
1298                 rc = CARD_FUNCTIONING;
1299         } else {
1300                 mutex_lock(&ctrl->crit_sect);
1301
1302                 /* turn on board without attaching to the bus */
1303                 enable_slot_power (ctrl, hp_slot);
1304
1305                 set_SOGO(ctrl);
1306
1307                 /* Wait for SOBS to be unset */
1308                 wait_for_ctrl_irq (ctrl);
1309
1310                 /* Change bits in slot power register to force another shift out
1311                  * NOTE: this is to work around the timer bug */
1312                 temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
1313                 writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
1314                 writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
1315
1316                 set_SOGO(ctrl);
1317
1318                 /* Wait for SOBS to be unset */
1319                 wait_for_ctrl_irq (ctrl);
1320
1321                 adapter_speed = get_adapter_speed(ctrl, hp_slot);
1322                 if (ctrl->speed != adapter_speed)
1323                         if (set_controller_speed(ctrl, adapter_speed, hp_slot))
1324                                 rc = WRONG_BUS_FREQUENCY;
1325
1326                 /* turn off board without attaching to the bus */
1327                 disable_slot_power (ctrl, hp_slot);
1328
1329                 set_SOGO(ctrl);
1330
1331                 /* Wait for SOBS to be unset */
1332                 wait_for_ctrl_irq (ctrl);
1333
1334                 mutex_unlock(&ctrl->crit_sect);
1335
1336                 if (rc)
1337                         return rc;
1338
1339                 mutex_lock(&ctrl->crit_sect);
1340
1341                 slot_enable (ctrl, hp_slot);
1342                 green_LED_blink (ctrl, hp_slot);
1343
1344                 amber_LED_off (ctrl, hp_slot);
1345
1346                 set_SOGO(ctrl);
1347
1348                 /* Wait for SOBS to be unset */
1349                 wait_for_ctrl_irq (ctrl);
1350
1351                 mutex_unlock(&ctrl->crit_sect);
1352
1353                 /* Wait for ~1 second because of hot plug spec */
1354                 long_delay(1*HZ);
1355
1356                 /* Check for a power fault */
1357                 if (func->status == 0xFF) {
1358                         /* power fault occurred, but it was benign */
1359                         rc = POWER_FAILURE;
1360                         func->status = 0;
1361                 } else
1362                         rc = cpqhp_valid_replace(ctrl, func);
1363
1364                 if (!rc) {
1365                         /* It must be the same board */
1366
1367                         rc = cpqhp_configure_board(ctrl, func);
1368
1369                         /* If configuration fails, turn it off
1370                          * Get slot won't work for devices behind
1371                          * bridges, but in this case it will always be
1372                          * called for the "base" bus/dev/func of an
1373                          * adapter. */
1374
1375                         mutex_lock(&ctrl->crit_sect);
1376
1377                         amber_LED_on (ctrl, hp_slot);
1378                         green_LED_off (ctrl, hp_slot);
1379                         slot_disable (ctrl, hp_slot);
1380
1381                         set_SOGO(ctrl);
1382
1383                         /* Wait for SOBS to be unset */
1384                         wait_for_ctrl_irq (ctrl);
1385
1386                         mutex_unlock(&ctrl->crit_sect);
1387
1388                         if (rc)
1389                                 return rc;
1390                         else
1391                                 return 1;
1392
1393                 } else {
1394                         /* Something is wrong
1395
1396                          * Get slot won't work for devices behind bridges, but
1397                          * in this case it will always be called for the "base"
1398                          * bus/dev/func of an adapter. */
1399
1400                         mutex_lock(&ctrl->crit_sect);
1401
1402                         amber_LED_on (ctrl, hp_slot);
1403                         green_LED_off (ctrl, hp_slot);
1404                         slot_disable (ctrl, hp_slot);
1405
1406                         set_SOGO(ctrl);
1407
1408                         /* Wait for SOBS to be unset */
1409                         wait_for_ctrl_irq (ctrl);
1410
1411                         mutex_unlock(&ctrl->crit_sect);
1412                 }
1413
1414         }
1415         return rc;
1416
1417 }
1418
1419
1420 /**
1421  * board_added - Called after a board has been added to the system.
1422  *
1423  * Turns power on for the board
1424  * Configures board
1425  *
1426  */
1427 static u32 board_added(struct pci_func *func, struct controller *ctrl)
1428 {
1429         u8 hp_slot;
1430         u8 temp_byte;
1431         u8 adapter_speed;
1432         int index;
1433         u32 temp_register = 0xFFFFFFFF;
1434         u32 rc = 0;
1435         struct pci_func *new_slot = NULL;
1436         struct slot *p_slot;
1437         struct resource_lists res_lists;
1438
1439         hp_slot = func->device - ctrl->slot_device_offset;
1440         dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n",
1441             __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
1442
1443         mutex_lock(&ctrl->crit_sect);
1444
1445         /* turn on board without attaching to the bus */
1446         enable_slot_power(ctrl, hp_slot);
1447
1448         set_SOGO(ctrl);
1449
1450         /* Wait for SOBS to be unset */
1451         wait_for_ctrl_irq (ctrl);
1452
1453         /* Change bits in slot power register to force another shift out
1454          * NOTE: this is to work around the timer bug */
1455         temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
1456         writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
1457         writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
1458
1459         set_SOGO(ctrl);
1460
1461         /* Wait for SOBS to be unset */
1462         wait_for_ctrl_irq (ctrl);
1463
1464         adapter_speed = get_adapter_speed(ctrl, hp_slot);
1465         if (ctrl->speed != adapter_speed)
1466                 if (set_controller_speed(ctrl, adapter_speed, hp_slot))
1467                         rc = WRONG_BUS_FREQUENCY;
1468
1469         /* turn off board without attaching to the bus */
1470         disable_slot_power (ctrl, hp_slot);
1471
1472         set_SOGO(ctrl);
1473
1474         /* Wait for SOBS to be unset */
1475         wait_for_ctrl_irq(ctrl);
1476
1477         mutex_unlock(&ctrl->crit_sect);
1478
1479         if (rc)
1480                 return rc;
1481
1482         p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
1483
1484         /* turn on board and blink green LED */
1485
1486         dbg("%s: before down\n", __FUNCTION__);
1487         mutex_lock(&ctrl->crit_sect);
1488         dbg("%s: after down\n", __FUNCTION__);
1489
1490         dbg("%s: before slot_enable\n", __FUNCTION__);
1491         slot_enable (ctrl, hp_slot);
1492
1493         dbg("%s: before green_LED_blink\n", __FUNCTION__);
1494         green_LED_blink (ctrl, hp_slot);
1495
1496         dbg("%s: before amber_LED_blink\n", __FUNCTION__);
1497         amber_LED_off (ctrl, hp_slot);
1498
1499         dbg("%s: before set_SOGO\n", __FUNCTION__);
1500         set_SOGO(ctrl);
1501
1502         /* Wait for SOBS to be unset */
1503         dbg("%s: before wait_for_ctrl_irq\n", __FUNCTION__);
1504         wait_for_ctrl_irq (ctrl);
1505         dbg("%s: after wait_for_ctrl_irq\n", __FUNCTION__);
1506
1507         dbg("%s: before up\n", __FUNCTION__);
1508         mutex_unlock(&ctrl->crit_sect);
1509         dbg("%s: after up\n", __FUNCTION__);
1510
1511         /* Wait for ~1 second because of hot plug spec */
1512         dbg("%s: before long_delay\n", __FUNCTION__);
1513         long_delay(1*HZ);
1514         dbg("%s: after long_delay\n", __FUNCTION__);
1515
1516         dbg("%s: func status = %x\n", __FUNCTION__, func->status);
1517         /* Check for a power fault */
1518         if (func->status == 0xFF) {
1519                 /* power fault occurred, but it was benign */
1520                 temp_register = 0xFFFFFFFF;
1521                 dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register);
1522                 rc = POWER_FAILURE;
1523                 func->status = 0;
1524         } else {
1525                 /* Get vendor/device ID u32 */
1526                 ctrl->pci_bus->number = func->bus;
1527                 rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), PCI_VENDOR_ID, &temp_register);
1528                 dbg("%s: pci_read_config_dword returns %d\n", __FUNCTION__, rc);
1529                 dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register);
1530
1531                 if (rc != 0) {
1532                         /* Something's wrong here */
1533                         temp_register = 0xFFFFFFFF;
1534                         dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register);
1535                 }
1536                 /* Preset return code.  It will be changed later if things go okay. */
1537                 rc = NO_ADAPTER_PRESENT;
1538         }
1539
1540         /* All F's is an empty slot or an invalid board */
1541         if (temp_register != 0xFFFFFFFF) {        /* Check for a board in the slot */
1542                 res_lists.io_head = ctrl->io_head;
1543                 res_lists.mem_head = ctrl->mem_head;
1544                 res_lists.p_mem_head = ctrl->p_mem_head;
1545                 res_lists.bus_head = ctrl->bus_head;
1546                 res_lists.irqs = NULL;
1547
1548                 rc = configure_new_device(ctrl, func, 0, &res_lists);
1549
1550                 dbg("%s: back from configure_new_device\n", __FUNCTION__);
1551                 ctrl->io_head = res_lists.io_head;
1552                 ctrl->mem_head = res_lists.mem_head;
1553                 ctrl->p_mem_head = res_lists.p_mem_head;
1554                 ctrl->bus_head = res_lists.bus_head;
1555
1556                 cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
1557                 cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
1558                 cpqhp_resource_sort_and_combine(&(ctrl->io_head));
1559                 cpqhp_resource_sort_and_combine(&(ctrl->bus_head));
1560
1561                 if (rc) {
1562                         mutex_lock(&ctrl->crit_sect);
1563
1564                         amber_LED_on (ctrl, hp_slot);
1565                         green_LED_off (ctrl, hp_slot);
1566                         slot_disable (ctrl, hp_slot);
1567
1568                         set_SOGO(ctrl);
1569
1570                         /* Wait for SOBS to be unset */
1571                         wait_for_ctrl_irq (ctrl);
1572
1573                         mutex_unlock(&ctrl->crit_sect);
1574                         return rc;
1575                 } else {
1576                         cpqhp_save_slot_config(ctrl, func);
1577                 }
1578
1579
1580                 func->status = 0;
1581                 func->switch_save = 0x10;
1582                 func->is_a_board = 0x01;
1583
1584                 /* next, we will instantiate the linux pci_dev structures (with
1585                  * appropriate driver notification, if already present) */
1586                 dbg("%s: configure linux pci_dev structure\n", __FUNCTION__);
1587                 index = 0;
1588                 do {
1589                         new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
1590                         if (new_slot && !new_slot->pci_dev) {
1591                                 cpqhp_configure_device(ctrl, new_slot);
1592                         }
1593                 } while (new_slot);
1594
1595                 mutex_lock(&ctrl->crit_sect);
1596
1597                 green_LED_on (ctrl, hp_slot);
1598
1599                 set_SOGO(ctrl);
1600
1601                 /* Wait for SOBS to be unset */
1602                 wait_for_ctrl_irq (ctrl);
1603
1604                 mutex_unlock(&ctrl->crit_sect);
1605         } else {
1606                 mutex_lock(&ctrl->crit_sect);
1607
1608                 amber_LED_on (ctrl, hp_slot);
1609                 green_LED_off (ctrl, hp_slot);
1610                 slot_disable (ctrl, hp_slot);
1611
1612                 set_SOGO(ctrl);
1613
1614                 /* Wait for SOBS to be unset */
1615                 wait_for_ctrl_irq (ctrl);
1616
1617                 mutex_unlock(&ctrl->crit_sect);
1618
1619                 return rc;
1620         }
1621         return 0;
1622 }
1623
1624
1625 /**
1626  * remove_board - Turns off slot and LED's
1627  *
1628  */
1629 static u32 remove_board(struct pci_func * func, u32 replace_flag, struct controller * ctrl)
1630 {
1631         int index;
1632         u8 skip = 0;
1633         u8 device;
1634         u8 hp_slot;
1635         u8 temp_byte;
1636         u32 rc;
1637         struct resource_lists res_lists;
1638         struct pci_func *temp_func;
1639
1640         if (cpqhp_unconfigure_device(func))
1641                 return 1;
1642
1643         device = func->device;
1644
1645         hp_slot = func->device - ctrl->slot_device_offset;
1646         dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
1647
1648         /* When we get here, it is safe to change base address registers.
1649          * We will attempt to save the base address register lengths */
1650         if (replace_flag || !ctrl->add_support)
1651                 rc = cpqhp_save_base_addr_length(ctrl, func);
1652         else if (!func->bus_head && !func->mem_head &&
1653                  !func->p_mem_head && !func->io_head) {
1654                 /* Here we check to see if we've saved any of the board's
1655                  * resources already.  If so, we'll skip the attempt to
1656                  * determine what's being used. */
1657                 index = 0;
1658                 temp_func = cpqhp_slot_find(func->bus, func->device, index++);
1659                 while (temp_func) {
1660                         if (temp_func->bus_head || temp_func->mem_head
1661                             || temp_func->p_mem_head || temp_func->io_head) {
1662                                 skip = 1;
1663                                 break;
1664                         }
1665                         temp_func = cpqhp_slot_find(temp_func->bus, temp_func->device, index++);
1666                 }
1667
1668                 if (!skip)
1669                         rc = cpqhp_save_used_resources(ctrl, func);
1670         }
1671         /* Change status to shutdown */
1672         if (func->is_a_board)
1673                 func->status = 0x01;
1674         func->configured = 0;
1675
1676         mutex_lock(&ctrl->crit_sect);
1677
1678         green_LED_off (ctrl, hp_slot);
1679         slot_disable (ctrl, hp_slot);
1680
1681         set_SOGO(ctrl);
1682
1683         /* turn off SERR for slot */
1684         temp_byte = readb(ctrl->hpc_reg + SLOT_SERR);
1685         temp_byte &= ~(0x01 << hp_slot);
1686         writeb(temp_byte, ctrl->hpc_reg + SLOT_SERR);
1687
1688         /* Wait for SOBS to be unset */
1689         wait_for_ctrl_irq (ctrl);
1690
1691         mutex_unlock(&ctrl->crit_sect);
1692
1693         if (!replace_flag && ctrl->add_support) {
1694                 while (func) {
1695                         res_lists.io_head = ctrl->io_head;
1696                         res_lists.mem_head = ctrl->mem_head;
1697                         res_lists.p_mem_head = ctrl->p_mem_head;
1698                         res_lists.bus_head = ctrl->bus_head;
1699
1700                         cpqhp_return_board_resources(func, &res_lists);
1701
1702                         ctrl->io_head = res_lists.io_head;
1703                         ctrl->mem_head = res_lists.mem_head;
1704                         ctrl->p_mem_head = res_lists.p_mem_head;
1705                         ctrl->bus_head = res_lists.bus_head;
1706
1707                         cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
1708                         cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
1709                         cpqhp_resource_sort_and_combine(&(ctrl->io_head));
1710                         cpqhp_resource_sort_and_combine(&(ctrl->bus_head));
1711
1712                         if (is_bridge(func)) {
1713                                 bridge_slot_remove(func);
1714                         } else
1715                                 slot_remove(func);
1716
1717                         func = cpqhp_slot_find(ctrl->bus, device, 0);
1718                 }
1719
1720                 /* Setup slot structure with entry for empty slot */
1721                 func = cpqhp_slot_create(ctrl->bus);
1722
1723                 if (func == NULL)
1724                         return 1;
1725
1726                 func->bus = ctrl->bus;
1727                 func->device = device;
1728                 func->function = 0;
1729                 func->configured = 0;
1730                 func->switch_save = 0x10;
1731                 func->is_a_board = 0;
1732                 func->p_task_event = NULL;
1733         }
1734
1735         return 0;
1736 }
1737
1738 static void pushbutton_helper_thread(unsigned long data)
1739 {
1740         pushbutton_pending = data;
1741         up(&event_semaphore);
1742 }
1743
1744
1745 /* this is the main worker thread */
1746 static int event_thread(void* data)
1747 {
1748         struct controller *ctrl;
1749         lock_kernel();
1750         daemonize("phpd_event");
1751
1752         unlock_kernel();
1753
1754         while (1) {
1755                 dbg("!!!!event_thread sleeping\n");
1756                 down_interruptible (&event_semaphore);
1757                 dbg("event_thread woken finished = %d\n", event_finished);
1758                 if (event_finished) break;
1759                 /* Do stuff here */
1760                 if (pushbutton_pending)
1761                         cpqhp_pushbutton_thread(pushbutton_pending);
1762                 else
1763                         for (ctrl = cpqhp_ctrl_list; ctrl; ctrl=ctrl->next)
1764                                 interrupt_event_handler(ctrl);
1765         }
1766         dbg("event_thread signals exit\n");
1767         up(&event_exit);
1768         return 0;
1769 }
1770
1771
1772 int cpqhp_event_start_thread(void)
1773 {
1774         int pid;
1775
1776         /* initialize our semaphores */
1777         init_MUTEX(&delay_sem);
1778         init_MUTEX_LOCKED(&event_semaphore);
1779         init_MUTEX_LOCKED(&event_exit);
1780         event_finished=0;
1781
1782         pid = kernel_thread(event_thread, NULL, 0);
1783         if (pid < 0) {
1784                 err ("Can't start up our event thread\n");
1785                 return -1;
1786         }
1787         dbg("Our event thread pid = %d\n", pid);
1788         return 0;
1789 }
1790
1791
1792 void cpqhp_event_stop_thread(void)
1793 {
1794         event_finished = 1;
1795         dbg("event_thread finish command given\n");
1796         up(&event_semaphore);
1797         dbg("wait for event_thread to exit\n");
1798         down(&event_exit);
1799 }
1800
1801
1802 static int update_slot_info(struct controller *ctrl, struct slot *slot)
1803 {
1804         struct hotplug_slot_info *info;
1805         int result;
1806
1807         info = kmalloc(sizeof(*info), GFP_KERNEL);
1808         if (!info)
1809                 return -ENOMEM;
1810
1811         info->power_status = get_slot_enabled(ctrl, slot);
1812         info->attention_status = cpq_get_attention_status(ctrl, slot);
1813         info->latch_status = cpq_get_latch_status(ctrl, slot);
1814         info->adapter_status = get_presence_status(ctrl, slot);
1815         result = pci_hp_change_slot_info(slot->hotplug_slot, info);
1816         kfree (info);
1817         return result;
1818 }
1819
1820 static void interrupt_event_handler(struct controller *ctrl)
1821 {
1822         int loop = 0;
1823         int change = 1;
1824         struct pci_func *func;
1825         u8 hp_slot;
1826         struct slot *p_slot;
1827
1828         while (change) {
1829                 change = 0;
1830
1831                 for (loop = 0; loop < 10; loop++) {
1832                         /* dbg("loop %d\n", loop); */
1833                         if (ctrl->event_queue[loop].event_type != 0) {
1834                                 hp_slot = ctrl->event_queue[loop].hp_slot;
1835
1836                                 func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0);
1837                                 if (!func)
1838                                         return;
1839
1840                                 p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
1841                                 if (!p_slot)
1842                                         return;
1843
1844                                 dbg("hp_slot %d, func %p, p_slot %p\n",
1845                                     hp_slot, func, p_slot);
1846
1847                                 if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
1848                                         dbg("button pressed\n");
1849                                 } else if (ctrl->event_queue[loop].event_type ==
1850                                            INT_BUTTON_CANCEL) {
1851                                         dbg("button cancel\n");
1852                                         del_timer(&p_slot->task_event);
1853
1854                                         mutex_lock(&ctrl->crit_sect);
1855
1856                                         if (p_slot->state == BLINKINGOFF_STATE) {
1857                                                 /* slot is on */
1858                                                 dbg("turn on green LED\n");
1859                                                 green_LED_on (ctrl, hp_slot);
1860                                         } else if (p_slot->state == BLINKINGON_STATE) {
1861                                                 /* slot is off */
1862                                                 dbg("turn off green LED\n");
1863                                                 green_LED_off (ctrl, hp_slot);
1864                                         }
1865
1866                                         info(msg_button_cancel, p_slot->number);
1867
1868                                         p_slot->state = STATIC_STATE;
1869
1870                                         amber_LED_off (ctrl, hp_slot);
1871
1872                                         set_SOGO(ctrl);
1873
1874                                         /* Wait for SOBS to be unset */
1875                                         wait_for_ctrl_irq (ctrl);
1876
1877                                         mutex_unlock(&ctrl->crit_sect);
1878                                 }
1879                                 /*** button Released (No action on press...) */
1880                                 else if (ctrl->event_queue[loop].event_type == INT_BUTTON_RELEASE) {
1881                                         dbg("button release\n");
1882
1883                                         if (is_slot_enabled (ctrl, hp_slot)) {
1884                                                 dbg("slot is on\n");
1885                                                 p_slot->state = BLINKINGOFF_STATE;
1886                                                 info(msg_button_off, p_slot->number);
1887                                         } else {
1888                                                 dbg("slot is off\n");
1889                                                 p_slot->state = BLINKINGON_STATE;
1890                                                 info(msg_button_on, p_slot->number);
1891                                         }
1892                                         mutex_lock(&ctrl->crit_sect);
1893
1894                                         dbg("blink green LED and turn off amber\n");
1895
1896                                         amber_LED_off (ctrl, hp_slot);
1897                                         green_LED_blink (ctrl, hp_slot);
1898
1899                                         set_SOGO(ctrl);
1900
1901                                         /* Wait for SOBS to be unset */
1902                                         wait_for_ctrl_irq (ctrl);
1903
1904                                         mutex_unlock(&ctrl->crit_sect);
1905                                         init_timer(&p_slot->task_event);
1906                                         p_slot->hp_slot = hp_slot;
1907                                         p_slot->ctrl = ctrl;
1908 /*                                      p_slot->physical_slot = physical_slot; */
1909                                         p_slot->task_event.expires = jiffies + 5 * HZ;   /* 5 second delay */
1910                                         p_slot->task_event.function = pushbutton_helper_thread;
1911                                         p_slot->task_event.data = (u32) p_slot;
1912
1913                                         dbg("add_timer p_slot = %p\n", p_slot);
1914                                         add_timer(&p_slot->task_event);
1915                                 }
1916                                 /***********POWER FAULT */
1917                                 else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
1918                                         dbg("power fault\n");
1919                                 } else {
1920                                         /* refresh notification */
1921                                         if (p_slot)
1922                                                 update_slot_info(ctrl, p_slot);
1923                                 }
1924
1925                                 ctrl->event_queue[loop].event_type = 0;
1926
1927                                 change = 1;
1928                         }
1929                 }               /* End of FOR loop */
1930         }
1931
1932         return;
1933 }
1934
1935
1936 /**
1937  * cpqhp_pushbutton_thread
1938  *
1939  * Scheduled procedure to handle blocking stuff for the pushbuttons
1940  * Handles all pending events and exits.
1941  *
1942  */
1943 void cpqhp_pushbutton_thread(unsigned long slot)
1944 {
1945         u8 hp_slot;
1946         u8 device;
1947         struct pci_func *func;
1948         struct slot *p_slot = (struct slot *) slot;
1949         struct controller *ctrl = (struct controller *) p_slot->ctrl;
1950
1951         pushbutton_pending = 0;
1952         hp_slot = p_slot->hp_slot;
1953
1954         device = p_slot->device;
1955
1956         if (is_slot_enabled(ctrl, hp_slot)) {
1957                 p_slot->state = POWEROFF_STATE;
1958                 /* power Down board */
1959                 func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
1960                 dbg("In power_down_board, func = %p, ctrl = %p\n", func, ctrl);
1961                 if (!func) {
1962                         dbg("Error! func NULL in %s\n", __FUNCTION__);
1963                         return ;
1964                 }
1965
1966                 if (func != NULL && ctrl != NULL) {
1967                         if (cpqhp_process_SS(ctrl, func) != 0) {
1968                                 amber_LED_on (ctrl, hp_slot);
1969                                 green_LED_on (ctrl, hp_slot);
1970
1971                                 set_SOGO(ctrl);
1972
1973                                 /* Wait for SOBS to be unset */
1974                                 wait_for_ctrl_irq (ctrl);
1975                         }
1976                 }
1977
1978                 p_slot->state = STATIC_STATE;
1979         } else {
1980                 p_slot->state = POWERON_STATE;
1981                 /* slot is off */
1982
1983                 func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
1984                 dbg("In add_board, func = %p, ctrl = %p\n", func, ctrl);
1985                 if (!func) {
1986                         dbg("Error! func NULL in %s\n", __FUNCTION__);
1987                         return ;
1988                 }
1989
1990                 if (func != NULL && ctrl != NULL) {
1991                         if (cpqhp_process_SI(ctrl, func) != 0) {
1992                                 amber_LED_on(ctrl, hp_slot);
1993                                 green_LED_off(ctrl, hp_slot);
1994
1995                                 set_SOGO(ctrl);
1996
1997                                 /* Wait for SOBS to be unset */
1998                                 wait_for_ctrl_irq (ctrl);
1999                         }
2000                 }
2001
2002                 p_slot->state = STATIC_STATE;
2003         }
2004
2005         return;
2006 }
2007
2008
2009 int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func)
2010 {
2011         u8 device, hp_slot;
2012         u16 temp_word;
2013         u32 tempdword;
2014         int rc;
2015         struct slot* p_slot;
2016         int physical_slot = 0;
2017
2018         tempdword = 0;
2019
2020         device = func->device;
2021         hp_slot = device - ctrl->slot_device_offset;
2022         p_slot = cpqhp_find_slot(ctrl, device);
2023         if (p_slot)
2024                 physical_slot = p_slot->number;
2025
2026         /* Check to see if the interlock is closed */
2027         tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
2028
2029         if (tempdword & (0x01 << hp_slot)) {
2030                 return 1;
2031         }
2032
2033         if (func->is_a_board) {
2034                 rc = board_replaced(func, ctrl);
2035         } else {
2036                 /* add board */
2037                 slot_remove(func);
2038
2039                 func = cpqhp_slot_create(ctrl->bus);
2040                 if (func == NULL)
2041                         return 1;
2042
2043                 func->bus = ctrl->bus;
2044                 func->device = device;
2045                 func->function = 0;
2046                 func->configured = 0;
2047                 func->is_a_board = 1;
2048
2049                 /* We have to save the presence info for these slots */
2050                 temp_word = ctrl->ctrl_int_comp >> 16;
2051                 func->presence_save = (temp_word >> hp_slot) & 0x01;
2052                 func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
2053
2054                 if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
2055                         func->switch_save = 0;
2056                 } else {
2057                         func->switch_save = 0x10;
2058                 }
2059
2060                 rc = board_added(func, ctrl);
2061                 if (rc) {
2062                         if (is_bridge(func)) {
2063                                 bridge_slot_remove(func);
2064                         } else
2065                                 slot_remove(func);
2066
2067                         /* Setup slot structure with entry for empty slot */
2068                         func = cpqhp_slot_create(ctrl->bus);
2069
2070                         if (func == NULL)
2071                                 return 1;
2072
2073                         func->bus = ctrl->bus;
2074                         func->device = device;
2075                         func->function = 0;
2076                         func->configured = 0;
2077                         func->is_a_board = 0;
2078
2079                         /* We have to save the presence info for these slots */
2080                         temp_word = ctrl->ctrl_int_comp >> 16;
2081                         func->presence_save = (temp_word >> hp_slot) & 0x01;
2082                         func->presence_save |=
2083                         (temp_word >> (hp_slot + 7)) & 0x02;
2084
2085                         if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
2086                                 func->switch_save = 0;
2087                         } else {
2088                                 func->switch_save = 0x10;
2089                         }
2090                 }
2091         }
2092
2093         if (rc) {
2094                 dbg("%s: rc = %d\n", __FUNCTION__, rc);
2095         }
2096
2097         if (p_slot)
2098                 update_slot_info(ctrl, p_slot);
2099
2100         return rc;
2101 }
2102
2103
2104 int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
2105 {
2106         u8 device, class_code, header_type, BCR;
2107         u8 index = 0;
2108         u8 replace_flag;
2109         u32 rc = 0;
2110         unsigned int devfn;
2111         struct slot* p_slot;
2112         struct pci_bus *pci_bus = ctrl->pci_bus;
2113         int physical_slot=0;
2114
2115         device = func->device;
2116         func = cpqhp_slot_find(ctrl->bus, device, index++);
2117         p_slot = cpqhp_find_slot(ctrl, device);
2118         if (p_slot) {
2119                 physical_slot = p_slot->number;
2120         }
2121
2122         /* Make sure there are no video controllers here */
2123         while (func && !rc) {
2124                 pci_bus->number = func->bus;
2125                 devfn = PCI_DEVFN(func->device, func->function);
2126
2127                 /* Check the Class Code */
2128                 rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
2129                 if (rc)
2130                         return rc;
2131
2132                 if (class_code == PCI_BASE_CLASS_DISPLAY) {
2133                         /* Display/Video adapter (not supported) */
2134                         rc = REMOVE_NOT_SUPPORTED;
2135                 } else {
2136                         /* See if it's a bridge */
2137                         rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
2138                         if (rc)
2139                                 return rc;
2140
2141                         /* If it's a bridge, check the VGA Enable bit */
2142                         if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
2143                                 rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
2144                                 if (rc)
2145                                         return rc;
2146
2147                                 /* If the VGA Enable bit is set, remove isn't
2148                                  * supported */
2149                                 if (BCR & PCI_BRIDGE_CTL_VGA) {
2150                                         rc = REMOVE_NOT_SUPPORTED;
2151                                 }
2152                         }
2153                 }
2154
2155                 func = cpqhp_slot_find(ctrl->bus, device, index++);
2156         }
2157
2158         func = cpqhp_slot_find(ctrl->bus, device, 0);
2159         if ((func != NULL) && !rc) {
2160                 /* FIXME: Replace flag should be passed into process_SS */
2161                 replace_flag = !(ctrl->add_support);
2162                 rc = remove_board(func, replace_flag, ctrl);
2163         } else if (!rc) {
2164                 rc = 1;
2165         }
2166
2167         if (p_slot)
2168                 update_slot_info(ctrl, p_slot);
2169
2170         return rc;
2171 }
2172
2173 /**
2174  * switch_leds: switch the leds, go from one site to the other.
2175  * @ctrl: controller to use
2176  * @num_of_slots: number of slots to use
2177  * @direction: 1 to start from the left side, 0 to start right.
2178  */
2179 static void switch_leds(struct controller *ctrl, const int num_of_slots,
2180                         u32 *work_LED, const int direction)
2181 {
2182         int loop;
2183
2184         for (loop = 0; loop < num_of_slots; loop++) {
2185                 if (direction)
2186                         *work_LED = *work_LED >> 1;
2187                 else
2188                         *work_LED = *work_LED << 1;
2189                 writel(*work_LED, ctrl->hpc_reg + LED_CONTROL);
2190
2191                 set_SOGO(ctrl);
2192
2193                 /* Wait for SOGO interrupt */
2194                 wait_for_ctrl_irq(ctrl);
2195
2196                 /* Get ready for next iteration */
2197                 long_delay((2*HZ)/10);
2198         }
2199 }
2200
2201 /**
2202  * hardware_test - runs hardware tests
2203  *
2204  * For hot plug ctrl folks to play with.
2205  * test_num is the number written to the "test" file in sysfs
2206  *
2207  */
2208 int cpqhp_hardware_test(struct controller *ctrl, int test_num)
2209 {
2210         u32 save_LED;
2211         u32 work_LED;
2212         int loop;
2213         int num_of_slots;
2214
2215         num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f;
2216
2217         switch (test_num) {
2218                 case 1:
2219                         /* Do stuff here! */
2220
2221                         /* Do that funky LED thing */
2222                         /* so we can restore them later */
2223                         save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
2224                         work_LED = 0x01010101;
2225                         switch_leds(ctrl, num_of_slots, &work_LED, 0);
2226                         switch_leds(ctrl, num_of_slots, &work_LED, 1);
2227                         switch_leds(ctrl, num_of_slots, &work_LED, 0);
2228                         switch_leds(ctrl, num_of_slots, &work_LED, 1);
2229
2230                         work_LED = 0x01010000;
2231                         writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2232                         switch_leds(ctrl, num_of_slots, &work_LED, 0);
2233                         switch_leds(ctrl, num_of_slots, &work_LED, 1);
2234                         work_LED = 0x00000101;
2235                         writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2236                         switch_leds(ctrl, num_of_slots, &work_LED, 0);
2237                         switch_leds(ctrl, num_of_slots, &work_LED, 1);
2238
2239                         work_LED = 0x01010000;
2240                         writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2241                         for (loop = 0; loop < num_of_slots; loop++) {
2242                                 set_SOGO(ctrl);
2243
2244                                 /* Wait for SOGO interrupt */
2245                                 wait_for_ctrl_irq (ctrl);
2246
2247                                 /* Get ready for next iteration */
2248                                 long_delay((3*HZ)/10);
2249                                 work_LED = work_LED >> 16;
2250                                 writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2251
2252                                 set_SOGO(ctrl);
2253
2254                                 /* Wait for SOGO interrupt */
2255                                 wait_for_ctrl_irq (ctrl);
2256
2257                                 /* Get ready for next iteration */
2258                                 long_delay((3*HZ)/10);
2259                                 work_LED = work_LED << 16;
2260                                 writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2261                                 work_LED = work_LED << 1;
2262                                 writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
2263                         }
2264
2265                         /* put it back the way it was */
2266                         writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
2267
2268                         set_SOGO(ctrl);
2269
2270                         /* Wait for SOBS to be unset */
2271                         wait_for_ctrl_irq (ctrl);
2272                         break;
2273                 case 2:
2274                         /* Do other stuff here! */
2275                         break;
2276                 case 3:
2277                         /* and more... */
2278                         break;
2279         }
2280         return 0;
2281 }
2282
2283
2284 /**
2285  * configure_new_device - Configures the PCI header information of one board.
2286  *
2287  * @ctrl: pointer to controller structure
2288  * @func: pointer to function structure
2289  * @behind_bridge: 1 if this is a recursive call, 0 if not
2290  * @resources: pointer to set of resource lists
2291  *
2292  * Returns 0 if success
2293  *
2294  */
2295 static u32 configure_new_device(struct controller * ctrl, struct pci_func * func,
2296                                  u8 behind_bridge, struct resource_lists * resources)
2297 {
2298         u8 temp_byte, function, max_functions, stop_it;
2299         int rc;
2300         u32 ID;
2301         struct pci_func *new_slot;
2302         int index;
2303
2304         new_slot = func;
2305
2306         dbg("%s\n", __FUNCTION__);
2307         /* Check for Multi-function device */
2308         ctrl->pci_bus->number = func->bus;
2309         rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte);
2310         if (rc) {
2311                 dbg("%s: rc = %d\n", __FUNCTION__, rc);
2312                 return rc;
2313         }
2314
2315         if (temp_byte & 0x80)   /* Multi-function device */
2316                 max_functions = 8;
2317         else
2318                 max_functions = 1;
2319
2320         function = 0;
2321
2322         do {
2323                 rc = configure_new_function(ctrl, new_slot, behind_bridge, resources);
2324
2325                 if (rc) {
2326                         dbg("configure_new_function failed %d\n",rc);
2327                         index = 0;
2328
2329                         while (new_slot) {
2330                                 new_slot = cpqhp_slot_find(new_slot->bus, new_slot->device, index++);
2331
2332                                 if (new_slot)
2333                                         cpqhp_return_board_resources(new_slot, resources);
2334                         }
2335
2336                         return rc;
2337                 }
2338
2339                 function++;
2340
2341                 stop_it = 0;
2342
2343                 /* The following loop skips to the next present function
2344                  * and creates a board structure */
2345
2346                 while ((function < max_functions) && (!stop_it)) {
2347                         pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
2348
2349                         if (ID == 0xFFFFFFFF) {   /* There's nothing there. */
2350                                 function++;
2351                         } else {  /* There's something there */
2352                                 /* Setup slot structure. */
2353                                 new_slot = cpqhp_slot_create(func->bus);
2354
2355                                 if (new_slot == NULL)
2356                                         return 1;
2357
2358                                 new_slot->bus = func->bus;
2359                                 new_slot->device = func->device;
2360                                 new_slot->function = function;
2361                                 new_slot->is_a_board = 1;
2362                                 new_slot->status = 0;
2363
2364                                 stop_it++;
2365                         }
2366                 }
2367
2368         } while (function < max_functions);
2369         dbg("returning from configure_new_device\n");
2370
2371         return 0;
2372 }
2373
2374
2375 /*
2376   Configuration logic that involves the hotplug data structures and
2377   their bookkeeping
2378  */
2379
2380
2381 /**
2382  * configure_new_function - Configures the PCI header information of one device
2383  *
2384  * @ctrl: pointer to controller structure
2385  * @func: pointer to function structure
2386  * @behind_bridge: 1 if this is a recursive call, 0 if not
2387  * @resources: pointer to set of resource lists
2388  *
2389  * Calls itself recursively for bridged devices.
2390  * Returns 0 if success
2391  *
2392  */
2393 static int configure_new_function(struct controller *ctrl, struct pci_func *func,
2394                                    u8 behind_bridge,
2395                                    struct resource_lists *resources)
2396 {
2397         int cloop;
2398         u8 IRQ = 0;
2399         u8 temp_byte;
2400         u8 device;
2401         u8 class_code;
2402         u16 command;
2403         u16 temp_word;
2404         u32 temp_dword;
2405         u32 rc;
2406         u32 temp_register;
2407         u32 base;
2408         u32 ID;
2409         unsigned int devfn;
2410         struct pci_resource *mem_node;
2411         struct pci_resource *p_mem_node;
2412         struct pci_resource *io_node;
2413         struct pci_resource *bus_node;
2414         struct pci_resource *hold_mem_node;
2415         struct pci_resource *hold_p_mem_node;
2416         struct pci_resource *hold_IO_node;
2417         struct pci_resource *hold_bus_node;
2418         struct irq_mapping irqs;
2419         struct pci_func *new_slot;
2420         struct pci_bus *pci_bus;
2421         struct resource_lists temp_resources;
2422
2423         pci_bus = ctrl->pci_bus;
2424         pci_bus->number = func->bus;
2425         devfn = PCI_DEVFN(func->device, func->function);
2426
2427         /* Check for Bridge */
2428         rc = pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte);
2429         if (rc)
2430                 return rc;
2431
2432         if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
2433                 /* set Primary bus */
2434                 dbg("set Primary bus = %d\n", func->bus);
2435                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
2436                 if (rc)
2437                         return rc;
2438
2439                 /* find range of busses to use */
2440                 dbg("find ranges of buses to use\n");
2441                 bus_node = get_max_resource(&(resources->bus_head), 1);
2442
2443                 /* If we don't have any busses to allocate, we can't continue */
2444                 if (!bus_node)
2445                         return -ENOMEM;
2446
2447                 /* set Secondary bus */
2448                 temp_byte = bus_node->base;
2449                 dbg("set Secondary bus = %d\n", bus_node->base);
2450                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte);
2451                 if (rc)
2452                         return rc;
2453
2454                 /* set subordinate bus */
2455                 temp_byte = bus_node->base + bus_node->length - 1;
2456                 dbg("set subordinate bus = %d\n", bus_node->base + bus_node->length - 1);
2457                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
2458                 if (rc)
2459                         return rc;
2460
2461                 /* set subordinate Latency Timer and base Latency Timer */
2462                 temp_byte = 0x40;
2463                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte);
2464                 if (rc)
2465                         return rc;
2466                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte);
2467                 if (rc)
2468                         return rc;
2469
2470                 /* set Cache Line size */
2471                 temp_byte = 0x08;
2472                 rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte);
2473                 if (rc)
2474                         return rc;
2475
2476                 /* Setup the IO, memory, and prefetchable windows */
2477                 io_node = get_max_resource(&(resources->io_head), 0x1000);
2478                 if (!io_node)
2479                         return -ENOMEM;
2480                 mem_node = get_max_resource(&(resources->mem_head), 0x100000);
2481                 if (!mem_node)
2482                         return -ENOMEM;
2483                 p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000);
2484                 if (!p_mem_node)
2485                         return -ENOMEM;
2486                 dbg("Setup the IO, memory, and prefetchable windows\n");
2487                 dbg("io_node\n");
2488                 dbg("(base, len, next) (%x, %x, %p)\n", io_node->base,
2489                                         io_node->length, io_node->next);
2490                 dbg("mem_node\n");
2491                 dbg("(base, len, next) (%x, %x, %p)\n", mem_node->base,
2492                                         mem_node->length, mem_node->next);
2493                 dbg("p_mem_node\n");
2494                 dbg("(base, len, next) (%x, %x, %p)\n", p_mem_node->base,
2495                                         p_mem_node->length, p_mem_node->next);
2496
2497                 /* set up the IRQ info */
2498                 if (!resources->irqs) {
2499                         irqs.barber_pole = 0;
2500                         irqs.interrupt[0] = 0;
2501                         irqs.interrupt[1] = 0;
2502                         irqs.interrupt[2] = 0;
2503                         irqs.interrupt[3] = 0;
2504                         irqs.valid_INT = 0;
2505                 } else {
2506                         irqs.barber_pole = resources->irqs->barber_pole;
2507                         irqs.interrupt[0] = resources->irqs->interrupt[0];
2508                         irqs.interrupt[1] = resources->irqs->interrupt[1];
2509                         irqs.interrupt[2] = resources->irqs->interrupt[2];
2510                         irqs.interrupt[3] = resources->irqs->interrupt[3];
2511                         irqs.valid_INT = resources->irqs->valid_INT;
2512                 }
2513
2514                 /* set up resource lists that are now aligned on top and bottom
2515                  * for anything behind the bridge. */
2516                 temp_resources.bus_head = bus_node;
2517                 temp_resources.io_head = io_node;
2518                 temp_resources.mem_head = mem_node;
2519                 temp_resources.p_mem_head = p_mem_node;
2520                 temp_resources.irqs = &irqs;
2521
2522                 /* Make copies of the nodes we are going to pass down so that
2523                  * if there is a problem,we can just use these to free resources */
2524                 hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
2525                 hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
2526                 hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
2527                 hold_p_mem_node = kmalloc(sizeof(*hold_p_mem_node), GFP_KERNEL);
2528
2529                 if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) {
2530                         kfree(hold_bus_node);
2531                         kfree(hold_IO_node);
2532                         kfree(hold_mem_node);
2533                         kfree(hold_p_mem_node);
2534
2535                         return 1;
2536                 }
2537
2538                 memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource));
2539
2540                 bus_node->base += 1;
2541                 bus_node->length -= 1;
2542                 bus_node->next = NULL;
2543
2544                 /* If we have IO resources copy them and fill in the bridge's
2545                  * IO range registers */
2546                 if (io_node) {
2547                         memcpy(hold_IO_node, io_node, sizeof(struct pci_resource));
2548                         io_node->next = NULL;
2549
2550                         /* set IO base and Limit registers */
2551                         temp_byte = io_node->base >> 8;
2552                         rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte);
2553
2554                         temp_byte = (io_node->base + io_node->length - 1) >> 8;
2555                         rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
2556                 } else {
2557                         kfree(hold_IO_node);
2558                         hold_IO_node = NULL;
2559                 }
2560
2561                 /* If we have memory resources copy them and fill in the
2562                  * bridge's memory range registers.  Otherwise, fill in the
2563                  * range registers with values that disable them. */
2564                 if (mem_node) {
2565                         memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource));
2566                         mem_node->next = NULL;
2567
2568                         /* set Mem base and Limit registers */
2569                         temp_word = mem_node->base >> 16;
2570                         rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
2571
2572                         temp_word = (mem_node->base + mem_node->length - 1) >> 16;
2573                         rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
2574                 } else {
2575                         temp_word = 0xFFFF;
2576                         rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
2577
2578                         temp_word = 0x0000;
2579                         rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
2580
2581                         kfree(hold_mem_node);
2582                         hold_mem_node = NULL;
2583                 }
2584
2585                 memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource));
2586                 p_mem_node->next = NULL;
2587
2588                 /* set Pre Mem base and Limit registers */
2589                 temp_word = p_mem_node->base >> 16;
2590                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
2591
2592                 temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
2593                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
2594
2595                 /* Adjust this to compensate for extra adjustment in first loop */
2596                 irqs.barber_pole--;
2597
2598                 rc = 0;
2599
2600                 /* Here we actually find the devices and configure them */
2601                 for (device = 0; (device <= 0x1F) && !rc; device++) {
2602                         irqs.barber_pole = (irqs.barber_pole + 1) & 0x03;
2603
2604                         ID = 0xFFFFFFFF;
2605                         pci_bus->number = hold_bus_node->base;
2606                         pci_bus_read_config_dword (pci_bus, PCI_DEVFN(device, 0), 0x00, &ID);
2607                         pci_bus->number = func->bus;
2608
2609                         if (ID != 0xFFFFFFFF) {   /*  device present */
2610                                 /* Setup slot structure. */
2611                                 new_slot = cpqhp_slot_create(hold_bus_node->base);
2612
2613                                 if (new_slot == NULL) {
2614                                         rc = -ENOMEM;
2615                                         continue;
2616                                 }
2617
2618                                 new_slot->bus = hold_bus_node->base;
2619                                 new_slot->device = device;
2620                                 new_slot->function = 0;
2621                                 new_slot->is_a_board = 1;
2622                                 new_slot->status = 0;
2623
2624                                 rc = configure_new_device(ctrl, new_slot, 1, &temp_resources);
2625                                 dbg("configure_new_device rc=0x%x\n",rc);
2626                         }       /* End of IF (device in slot?) */
2627                 }               /* End of FOR loop */
2628
2629                 if (rc)
2630                         goto free_and_out;
2631                 /* save the interrupt routing information */
2632                 if (resources->irqs) {
2633                         resources->irqs->interrupt[0] = irqs.interrupt[0];
2634                         resources->irqs->interrupt[1] = irqs.interrupt[1];
2635                         resources->irqs->interrupt[2] = irqs.interrupt[2];
2636                         resources->irqs->interrupt[3] = irqs.interrupt[3];
2637                         resources->irqs->valid_INT = irqs.valid_INT;
2638                 } else if (!behind_bridge) {
2639                         /* We need to hook up the interrupts here */
2640                         for (cloop = 0; cloop < 4; cloop++) {
2641                                 if (irqs.valid_INT & (0x01 << cloop)) {
2642                                         rc = cpqhp_set_irq(func->bus, func->device,
2643                                                            0x0A + cloop, irqs.interrupt[cloop]);
2644                                         if (rc)
2645                                                 goto free_and_out;
2646                                 }
2647                         }       /* end of for loop */
2648                 }
2649                 /* Return unused bus resources
2650                  * First use the temporary node to store information for
2651                  * the board */
2652                 if (hold_bus_node && bus_node && temp_resources.bus_head) {
2653                         hold_bus_node->length = bus_node->base - hold_bus_node->base;
2654
2655                         hold_bus_node->next = func->bus_head;
2656                         func->bus_head = hold_bus_node;
2657
2658                         temp_byte = temp_resources.bus_head->base - 1;
2659
2660                         /* set subordinate bus */
2661                         rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
2662
2663                         if (temp_resources.bus_head->length == 0) {
2664                                 kfree(temp_resources.bus_head);
2665                                 temp_resources.bus_head = NULL;
2666                         } else {
2667                                 return_resource(&(resources->bus_head), temp_resources.bus_head);
2668                         }
2669                 }
2670
2671                 /* If we have IO space available and there is some left,
2672                  * return the unused portion */
2673                 if (hold_IO_node && temp_resources.io_head) {
2674                         io_node = do_pre_bridge_resource_split(&(temp_resources.io_head),
2675                                                                &hold_IO_node, 0x1000);
2676
2677                         /* Check if we were able to split something off */
2678                         if (io_node) {
2679                                 hold_IO_node->base = io_node->base + io_node->length;
2680
2681                                 temp_byte = (hold_IO_node->base) >> 8;
2682                                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_IO_BASE, temp_byte);
2683
2684                                 return_resource(&(resources->io_head), io_node);
2685                         }
2686
2687                         io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000);
2688
2689                         /* Check if we were able to split something off */
2690                         if (io_node) {
2691                                 /* First use the temporary node to store
2692                                  * information for the board */
2693                                 hold_IO_node->length = io_node->base - hold_IO_node->base;
2694
2695                                 /* If we used any, add it to the board's list */
2696                                 if (hold_IO_node->length) {
2697                                         hold_IO_node->next = func->io_head;
2698                                         func->io_head = hold_IO_node;
2699
2700                                         temp_byte = (io_node->base - 1) >> 8;
2701                                         rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
2702
2703                                         return_resource(&(resources->io_head), io_node);
2704                                 } else {
2705                                         /* it doesn't need any IO */
2706                                         temp_word = 0x0000;
2707                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_IO_LIMIT, temp_word);
2708
2709                                         return_resource(&(resources->io_head), io_node);
2710                                         kfree(hold_IO_node);
2711                                 }
2712                         } else {
2713                                 /* it used most of the range */
2714                                 hold_IO_node->next = func->io_head;
2715                                 func->io_head = hold_IO_node;
2716                         }
2717                 } else if (hold_IO_node) {
2718                         /* it used the whole range */
2719                         hold_IO_node->next = func->io_head;
2720                         func->io_head = hold_IO_node;
2721                 }
2722                 /* If we have memory space available and there is some left,
2723                  * return the unused portion */
2724                 if (hold_mem_node && temp_resources.mem_head) {
2725                         mem_node = do_pre_bridge_resource_split(&(temp_resources.  mem_head),
2726                                                                 &hold_mem_node, 0x100000);
2727
2728                         /* Check if we were able to split something off */
2729                         if (mem_node) {
2730                                 hold_mem_node->base = mem_node->base + mem_node->length;
2731
2732                                 temp_word = (hold_mem_node->base) >> 16;
2733                                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
2734
2735                                 return_resource(&(resources->mem_head), mem_node);
2736                         }
2737
2738                         mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000);
2739
2740                         /* Check if we were able to split something off */
2741                         if (mem_node) {
2742                                 /* First use the temporary node to store
2743                                  * information for the board */
2744                                 hold_mem_node->length = mem_node->base - hold_mem_node->base;
2745
2746                                 if (hold_mem_node->length) {
2747                                         hold_mem_node->next = func->mem_head;
2748                                         func->mem_head = hold_mem_node;
2749
2750                                         /* configure end address */
2751                                         temp_word = (mem_node->base - 1) >> 16;
2752                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
2753
2754                                         /* Return unused resources to the pool */
2755                                         return_resource(&(resources->mem_head), mem_node);
2756                                 } else {
2757                                         /* it doesn't need any Mem */
2758                                         temp_word = 0x0000;
2759                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
2760
2761                                         return_resource(&(resources->mem_head), mem_node);
2762                                         kfree(hold_mem_node);
2763                                 }
2764                         } else {
2765                                 /* it used most of the range */
2766                                 hold_mem_node->next = func->mem_head;
2767                                 func->mem_head = hold_mem_node;
2768                         }
2769                 } else if (hold_mem_node) {
2770                         /* it used the whole range */
2771                         hold_mem_node->next = func->mem_head;
2772                         func->mem_head = hold_mem_node;
2773                 }
2774                 /* If we have prefetchable memory space available and there
2775                  * is some left at the end, return the unused portion */
2776                 if (hold_p_mem_node && temp_resources.p_mem_head) {
2777                         p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head),
2778                                                                   &hold_p_mem_node, 0x100000);
2779
2780                         /* Check if we were able to split something off */
2781                         if (p_mem_node) {
2782                                 hold_p_mem_node->base = p_mem_node->base + p_mem_node->length;
2783
2784                                 temp_word = (hold_p_mem_node->base) >> 16;
2785                                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
2786
2787                                 return_resource(&(resources->p_mem_head), p_mem_node);
2788                         }
2789
2790                         p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000);
2791
2792                         /* Check if we were able to split something off */
2793                         if (p_mem_node) {
2794                                 /* First use the temporary node to store
2795                                  * information for the board */
2796                                 hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base;
2797
2798                                 /* If we used any, add it to the board's list */
2799                                 if (hold_p_mem_node->length) {
2800                                         hold_p_mem_node->next = func->p_mem_head;
2801                                         func->p_mem_head = hold_p_mem_node;
2802
2803                                         temp_word = (p_mem_node->base - 1) >> 16;
2804                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
2805
2806                                         return_resource(&(resources->p_mem_head), p_mem_node);
2807                                 } else {
2808                                         /* it doesn't need any PMem */
2809                                         temp_word = 0x0000;
2810                                         rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
2811
2812                                         return_resource(&(resources->p_mem_head), p_mem_node);
2813                                         kfree(hold_p_mem_node);
2814                                 }
2815                         } else {
2816                                 /* it used the most of the range */
2817                                 hold_p_mem_node->next = func->p_mem_head;
2818                                 func->p_mem_head = hold_p_mem_node;
2819                         }
2820                 } else if (hold_p_mem_node) {
2821                         /* it used the whole range */
2822                         hold_p_mem_node->next = func->p_mem_head;
2823                         func->p_mem_head = hold_p_mem_node;
2824                 }
2825                 /* We should be configuring an IRQ and the bridge's base address
2826                  * registers if it needs them.  Although we have never seen such
2827                  * a device */
2828
2829                 /* enable card */
2830                 command = 0x0157;       /* = PCI_COMMAND_IO |
2831                                          *   PCI_COMMAND_MEMORY |
2832                                          *   PCI_COMMAND_MASTER |
2833                                          *   PCI_COMMAND_INVALIDATE |
2834                                          *   PCI_COMMAND_PARITY |
2835                                          *   PCI_COMMAND_SERR */
2836                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_COMMAND, command);
2837
2838                 /* set Bridge Control Register */
2839                 command = 0x07;         /* = PCI_BRIDGE_CTL_PARITY |
2840                                          *   PCI_BRIDGE_CTL_SERR |
2841                                          *   PCI_BRIDGE_CTL_NO_ISA */
2842                 rc = pci_bus_write_config_word (pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
2843         } else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
2844                 /* Standard device */
2845                 rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
2846
2847                 if (class_code == PCI_BASE_CLASS_DISPLAY) {
2848                         /* Display (video) adapter (not supported) */
2849                         return DEVICE_TYPE_NOT_SUPPORTED;
2850                 }
2851                 /* Figure out IO and memory needs */
2852                 for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
2853                         temp_register = 0xFFFFFFFF;
2854
2855                         dbg("CND: bus=%d, devfn=%d, offset=%d\n", pci_bus->number, devfn, cloop);
2856                         rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
2857
2858                         rc = pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp_register);
2859                         dbg("CND: base = 0x%x\n", temp_register);
2860
2861                         if (temp_register) {      /* If this register is implemented */
2862                                 if ((temp_register & 0x03L) == 0x01) {
2863                                         /* Map IO */
2864
2865                                         /* set base = amount of IO space */
2866                                         base = temp_register & 0xFFFFFFFC;
2867                                         base = ~base + 1;
2868
2869                                         dbg("CND:      length = 0x%x\n", base);
2870                                         io_node = get_io_resource(&(resources->io_head), base);
2871                                         dbg("Got io_node start = %8.8x, length = %8.8x next (%p)\n",
2872                                             io_node->base, io_node->length, io_node->next);
2873                                         dbg("func (%p) io_head (%p)\n", func, func->io_head);
2874
2875                                         /* allocate the resource to the board */
2876                                         if (io_node) {
2877                                                 base = io_node->base;
2878
2879                                                 io_node->next = func->io_head;
2880                                                 func->io_head = io_node;
2881                                         } else
2882                                                 return -ENOMEM;
2883                                 } else if ((temp_register & 0x0BL) == 0x08) {
2884                                         /* Map prefetchable memory */
2885                                         base = temp_register & 0xFFFFFFF0;
2886                                         base = ~base + 1;
2887
2888                                         dbg("CND:      length = 0x%x\n", base);
2889                                         p_mem_node = get_resource(&(resources->p_mem_head), base);
2890
2891                                         /* allocate the resource to the board */
2892                                         if (p_mem_node) {
2893                                                 base = p_mem_node->base;
2894
2895                                                 p_mem_node->next = func->p_mem_head;
2896                                                 func->p_mem_head = p_mem_node;
2897                                         } else
2898                                                 return -ENOMEM;
2899                                 } else if ((temp_register & 0x0BL) == 0x00) {
2900                                         /* Map memory */
2901                                         base = temp_register & 0xFFFFFFF0;
2902                                         base = ~base + 1;
2903
2904                                         dbg("CND:      length = 0x%x\n", base);
2905                                         mem_node = get_resource(&(resources->mem_head), base);
2906
2907                                         /* allocate the resource to the board */
2908                                         if (mem_node) {
2909                                                 base = mem_node->base;
2910
2911                                                 mem_node->next = func->mem_head;
2912                                                 func->mem_head = mem_node;
2913                                         } else
2914                                                 return -ENOMEM;
2915                                 } else if ((temp_register & 0x0BL) == 0x04) {
2916                                         /* Map memory */
2917                                         base = temp_register & 0xFFFFFFF0;
2918                                         base = ~base + 1;
2919
2920                                         dbg("CND:      length = 0x%x\n", base);
2921                                         mem_node = get_resource(&(resources->mem_head), base);
2922
2923                                         /* allocate the resource to the board */
2924                                         if (mem_node) {
2925                                                 base = mem_node->base;
2926
2927                                                 mem_node->next = func->mem_head;
2928                                                 func->mem_head = mem_node;
2929                                         } else
2930                                                 return -ENOMEM;
2931                                 } else if ((temp_register & 0x0BL) == 0x06) {
2932                                         /* Those bits are reserved, we can't handle this */
2933                                         return 1;
2934                                 } else {
2935                                         /* Requesting space below 1M */
2936                                         return NOT_ENOUGH_RESOURCES;
2937                                 }
2938
2939                                 rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base);
2940
2941                                 /* Check for 64-bit base */
2942                                 if ((temp_register & 0x07L) == 0x04) {
2943                                         cloop += 4;
2944
2945                                         /* Upper 32 bits of address always zero
2946                                          * on today's systems */
2947                                         /* FIXME this is probably not true on
2948                                          * Alpha and ia64??? */
2949                                         base = 0;
2950                                         rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base);
2951                                 }
2952                         }
2953                 }               /* End of base register loop */
2954                 if (cpqhp_legacy_mode) {
2955                         /* Figure out which interrupt pin this function uses */
2956                         rc = pci_bus_read_config_byte (pci_bus, devfn,
2957                                 PCI_INTERRUPT_PIN, &temp_byte);
2958
2959                         /* If this function needs an interrupt and we are behind
2960                          * a bridge and the pin is tied to something that's
2961                          * alread mapped, set this one the same */
2962                         if (temp_byte && resources->irqs &&
2963                             (resources->irqs->valid_INT &
2964                              (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
2965                                 /* We have to share with something already set up */
2966                                 IRQ = resources->irqs->interrupt[(temp_byte +
2967                                         resources->irqs->barber_pole - 1) & 0x03];
2968                         } else {
2969                                 /* Program IRQ based on card type */
2970                                 rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
2971
2972                                 if (class_code == PCI_BASE_CLASS_STORAGE) {
2973                                         IRQ = cpqhp_disk_irq;
2974                                 } else {
2975                                         IRQ = cpqhp_nic_irq;
2976                                 }
2977                         }
2978
2979                         /* IRQ Line */
2980                         rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_INTERRUPT_LINE, IRQ);
2981                 }
2982
2983                 if (!behind_bridge) {
2984                         rc = cpqhp_set_irq(func->bus, func->device, temp_byte + 0x09, IRQ);
2985                         if (rc)
2986                                 return 1;
2987                 } else {
2988                         /* TBD - this code may also belong in the other clause
2989                          * of this If statement */
2990                         resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03] = IRQ;
2991                         resources->irqs->valid_INT |= 0x01 << (temp_byte + resources->irqs->barber_pole - 1) & 0x03;
2992                 }
2993
2994                 /* Latency Timer */
2995                 temp_byte = 0x40;
2996                 rc = pci_bus_write_config_byte(pci_bus, devfn,
2997                                         PCI_LATENCY_TIMER, temp_byte);
2998
2999                 /* Cache Line size */
3000                 temp_byte = 0x08;
3001                 rc = pci_bus_write_config_byte(pci_bus, devfn,
3002                                         PCI_CACHE_LINE_SIZE, temp_byte);
3003
3004                 /* disable ROM base Address */
3005                 temp_dword = 0x00L;
3006                 rc = pci_bus_write_config_word(pci_bus, devfn,
3007                                         PCI_ROM_ADDRESS, temp_dword);
3008
3009                 /* enable card */
3010                 temp_word = 0x0157;     /* = PCI_COMMAND_IO |
3011                                          *   PCI_COMMAND_MEMORY |
3012                                          *   PCI_COMMAND_MASTER |
3013                                          *   PCI_COMMAND_INVALIDATE |
3014                                          *   PCI_COMMAND_PARITY |
3015                                          *   PCI_COMMAND_SERR */
3016                 rc = pci_bus_write_config_word (pci_bus, devfn,
3017                                         PCI_COMMAND, temp_word);
3018         } else {                /* End of Not-A-Bridge else */
3019                 /* It's some strange type of PCI adapter (Cardbus?) */
3020                 return DEVICE_TYPE_NOT_SUPPORTED;
3021         }
3022
3023         func->configured = 1;
3024
3025         return 0;
3026 free_and_out:
3027         cpqhp_destroy_resource_list (&temp_resources);
3028
3029         return_resource(&(resources-> bus_head), hold_bus_node);
3030         return_resource(&(resources-> io_head), hold_IO_node);
3031         return_resource(&(resources-> mem_head), hold_mem_node);
3032         return_resource(&(resources-> p_mem_head), hold_p_mem_node);
3033         return rc;
3034 }