3 * This is a driver for SMSC's LAN911{5,6,7,8} single-chip Ethernet devices.
5 * Copyright (C) 2005 Sensoria Corp
6 * Derived from the unified SMC91x driver by Nicolas Pitre
7 * and the smsc911x.c reference driver by SMSC
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 * watchdog = TX watchdog timeout
25 * tx_fifo_kb = Size of TX FIFO in KB
28 * 04/16/05 Dustin McIntire Initial version
30 static const char version[] =
31 "smc911x.c: v1.0 04-16-2005 by Dustin McIntire <dustin@sensoria.com>\n";
33 /* Debugging options */
34 #define ENABLE_SMC_DEBUG_RX 0
35 #define ENABLE_SMC_DEBUG_TX 0
36 #define ENABLE_SMC_DEBUG_DMA 0
37 #define ENABLE_SMC_DEBUG_PKTS 0
38 #define ENABLE_SMC_DEBUG_MISC 0
39 #define ENABLE_SMC_DEBUG_FUNC 0
41 #define SMC_DEBUG_RX ((ENABLE_SMC_DEBUG_RX ? 1 : 0) << 0)
42 #define SMC_DEBUG_TX ((ENABLE_SMC_DEBUG_TX ? 1 : 0) << 1)
43 #define SMC_DEBUG_DMA ((ENABLE_SMC_DEBUG_DMA ? 1 : 0) << 2)
44 #define SMC_DEBUG_PKTS ((ENABLE_SMC_DEBUG_PKTS ? 1 : 0) << 3)
45 #define SMC_DEBUG_MISC ((ENABLE_SMC_DEBUG_MISC ? 1 : 0) << 4)
46 #define SMC_DEBUG_FUNC ((ENABLE_SMC_DEBUG_FUNC ? 1 : 0) << 5)
49 #define SMC_DEBUG ( SMC_DEBUG_RX | \
58 #include <linux/init.h>
59 #include <linux/module.h>
60 #include <linux/kernel.h>
61 #include <linux/sched.h>
62 #include <linux/slab.h>
63 #include <linux/delay.h>
64 #include <linux/interrupt.h>
65 #include <linux/errno.h>
66 #include <linux/ioport.h>
67 #include <linux/crc32.h>
68 #include <linux/device.h>
69 #include <linux/platform_device.h>
70 #include <linux/spinlock.h>
71 #include <linux/ethtool.h>
72 #include <linux/mii.h>
73 #include <linux/workqueue.h>
75 #include <linux/netdevice.h>
76 #include <linux/etherdevice.h>
77 #include <linux/skbuff.h>
84 * Transmit timeout, default 5 seconds.
86 static int watchdog = 5000;
87 module_param(watchdog, int, 0400);
88 MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
90 static int tx_fifo_kb=8;
91 module_param(tx_fifo_kb, int, 0400);
92 MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)");
94 MODULE_LICENSE("GPL");
95 MODULE_ALIAS("platform:smc911x");
98 * The internal workings of the driver. If you are changing anything
99 * here with the SMC stuff, you should have the datasheet and know
100 * what you are doing.
102 #define CARDNAME "smc911x"
105 * Use power-down feature of the chip
110 #define DBG(n, args...) \
112 if (SMC_DEBUG & (n)) \
116 #define PRINTK(args...) printk(args)
118 #define DBG(n, args...) do { } while (0)
119 #define PRINTK(args...) printk(KERN_DEBUG args)
122 #if SMC_DEBUG_PKTS > 0
123 static void PRINT_PKT(u_char *buf, int length)
130 remainder = length % 16;
132 for (i = 0; i < lines ; i ++) {
134 for (cur = 0; cur < 8; cur++) {
138 printk("%02x%02x ", a, b);
142 for (i = 0; i < remainder/2 ; i++) {
146 printk("%02x%02x ", a, b);
151 #define PRINT_PKT(x...) do { } while (0)
155 /* this enables an interrupt in the interrupt mask register */
156 #define SMC_ENABLE_INT(lp, x) do { \
157 unsigned int __mask; \
158 __mask = SMC_GET_INT_EN((lp)); \
160 SMC_SET_INT_EN((lp), __mask); \
163 /* this disables an interrupt from the interrupt mask register */
164 #define SMC_DISABLE_INT(lp, x) do { \
165 unsigned int __mask; \
166 __mask = SMC_GET_INT_EN((lp)); \
168 SMC_SET_INT_EN((lp), __mask); \
172 * this does a soft reset on the device
174 static void smc911x_reset(struct net_device *dev)
176 struct smc911x_local *lp = netdev_priv(dev);
177 unsigned int reg, timeout=0, resets=1, irq_cfg;
180 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
182 /* Take out of PM setting first */
183 if ((SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_) == 0) {
184 /* Write to the bytetest will take out of powerdown */
185 SMC_SET_BYTE_TEST(lp, 0);
189 reg = SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_;
190 } while (--timeout && !reg);
192 PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name);
197 /* Disable all interrupts */
198 spin_lock_irqsave(&lp->lock, flags);
199 SMC_SET_INT_EN(lp, 0);
200 spin_unlock_irqrestore(&lp->lock, flags);
203 SMC_SET_HW_CFG(lp, HW_CFG_SRST_);
207 reg = SMC_GET_HW_CFG(lp);
208 /* If chip indicates reset timeout then try again */
209 if (reg & HW_CFG_SRST_TO_) {
210 PRINTK("%s: chip reset timeout, retrying...\n", dev->name);
214 } while (--timeout && (reg & HW_CFG_SRST_));
217 PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name);
221 /* make sure EEPROM has finished loading before setting GPIO_CFG */
223 while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_))
227 PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name);
231 /* Initialize interrupts */
232 SMC_SET_INT_EN(lp, 0);
235 /* Reset the FIFO level and flow control settings */
236 SMC_SET_HW_CFG(lp, (lp->tx_fifo_kb & 0xF) << 16);
237 //TODO: Figure out what appropriate pause time is
238 SMC_SET_FLOW(lp, FLOW_FCPT_ | FLOW_FCEN_);
239 SMC_SET_AFC_CFG(lp, lp->afc_cfg);
242 /* Set to LED outputs */
243 SMC_SET_GPIO_CFG(lp, 0x70070000);
246 * Deassert IRQ for 1*10us for edge type interrupts
247 * and drive IRQ pin push-pull
249 irq_cfg = (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_;
250 #ifdef SMC_DYNAMIC_BUS_CONFIG
251 if (lp->cfg.irq_polarity)
252 irq_cfg |= INT_CFG_IRQ_POL_;
254 SMC_SET_IRQ_CFG(lp, irq_cfg);
256 /* clear anything saved */
257 if (lp->pending_tx_skb != NULL) {
258 dev_kfree_skb (lp->pending_tx_skb);
259 lp->pending_tx_skb = NULL;
260 dev->stats.tx_errors++;
261 dev->stats.tx_aborted_errors++;
266 * Enable Interrupts, Receive, and Transmit
268 static void smc911x_enable(struct net_device *dev)
270 struct smc911x_local *lp = netdev_priv(dev);
271 unsigned mask, cfg, cr;
274 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
276 spin_lock_irqsave(&lp->lock, flags);
278 SMC_SET_MAC_ADDR(lp, dev->dev_addr);
281 cfg = SMC_GET_HW_CFG(lp);
282 cfg &= HW_CFG_TX_FIF_SZ_ | 0xFFF;
284 SMC_SET_HW_CFG(lp, cfg);
285 SMC_SET_FIFO_TDA(lp, 0xFF);
286 /* Update TX stats on every 64 packets received or every 1 sec */
287 SMC_SET_FIFO_TSL(lp, 64);
288 SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
290 SMC_GET_MAC_CR(lp, cr);
291 cr |= MAC_CR_TXEN_ | MAC_CR_HBDIS_;
292 SMC_SET_MAC_CR(lp, cr);
293 SMC_SET_TX_CFG(lp, TX_CFG_TX_ON_);
295 /* Add 2 byte padding to start of packets */
296 SMC_SET_RX_CFG(lp, (2<<8) & RX_CFG_RXDOFF_);
298 /* Turn on receiver and enable RX */
299 if (cr & MAC_CR_RXEN_)
300 DBG(SMC_DEBUG_RX, "%s: Receiver already enabled\n", dev->name);
302 SMC_SET_MAC_CR(lp, cr | MAC_CR_RXEN_);
304 /* Interrupt on every received packet */
305 SMC_SET_FIFO_RSA(lp, 0x01);
306 SMC_SET_FIFO_RSL(lp, 0x00);
308 /* now, enable interrupts */
309 mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ |
310 INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ |
312 if (IS_REV_A(lp->revision))
313 mask|=INT_EN_RDFL_EN_;
315 mask|=INT_EN_RDFO_EN_;
317 SMC_ENABLE_INT(lp, mask);
319 spin_unlock_irqrestore(&lp->lock, flags);
323 * this puts the device in an inactive state
325 static void smc911x_shutdown(struct net_device *dev)
327 struct smc911x_local *lp = netdev_priv(dev);
331 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", CARDNAME, __func__);
334 SMC_SET_INT_EN(lp, 0);
336 /* Turn of Rx and TX */
337 spin_lock_irqsave(&lp->lock, flags);
338 SMC_GET_MAC_CR(lp, cr);
339 cr &= ~(MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_);
340 SMC_SET_MAC_CR(lp, cr);
341 SMC_SET_TX_CFG(lp, TX_CFG_STOP_TX_);
342 spin_unlock_irqrestore(&lp->lock, flags);
345 static inline void smc911x_drop_pkt(struct net_device *dev)
347 struct smc911x_local *lp = netdev_priv(dev);
348 unsigned int fifo_count, timeout, reg;
350 DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", CARDNAME, __func__);
351 fifo_count = SMC_GET_RX_FIFO_INF(lp) & 0xFFFF;
352 if (fifo_count <= 4) {
353 /* Manually dump the packet data */
357 /* Fast forward through the bad packet */
358 SMC_SET_RX_DP_CTRL(lp, RX_DP_CTRL_FFWD_BUSY_);
362 reg = SMC_GET_RX_DP_CTRL(lp) & RX_DP_CTRL_FFWD_BUSY_;
363 } while (--timeout && reg);
365 PRINTK("%s: timeout waiting for RX fast forward\n", dev->name);
371 * This is the procedure to handle the receipt of a packet.
372 * It should be called after checking for packet presence in
373 * the RX status FIFO. It must be called with the spin lock
376 static inline void smc911x_rcv(struct net_device *dev)
378 struct smc911x_local *lp = netdev_priv(dev);
379 unsigned int pkt_len, status;
383 DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n",
384 dev->name, __func__);
385 status = SMC_GET_RX_STS_FIFO(lp);
386 DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x \n",
387 dev->name, (status & 0x3fff0000) >> 16, status & 0xc000ffff);
388 pkt_len = (status & RX_STS_PKT_LEN_) >> 16;
389 if (status & RX_STS_ES_) {
390 /* Deal with a bad packet */
391 dev->stats.rx_errors++;
392 if (status & RX_STS_CRC_ERR_)
393 dev->stats.rx_crc_errors++;
395 if (status & RX_STS_LEN_ERR_)
396 dev->stats.rx_length_errors++;
397 if (status & RX_STS_MCAST_)
398 dev->stats.multicast++;
400 /* Remove the bad packet data from the RX FIFO */
401 smc911x_drop_pkt(dev);
403 /* Receive a valid packet */
404 /* Alloc a buffer with extra room for DMA alignment */
405 skb=dev_alloc_skb(pkt_len+32);
406 if (unlikely(skb == NULL)) {
407 PRINTK( "%s: Low memory, rcvd packet dropped.\n",
409 dev->stats.rx_dropped++;
410 smc911x_drop_pkt(dev);
413 /* Align IP header to 32 bits
414 * Note that the device is configured to add a 2
415 * byte padding to the packet start, so we really
416 * want to write to the orignal data pointer */
419 skb_put(skb,pkt_len-4);
423 /* Lower the FIFO threshold if possible */
424 fifo = SMC_GET_FIFO_INT(lp);
425 if (fifo & 0xFF) fifo--;
426 DBG(SMC_DEBUG_RX, "%s: Setting RX stat FIFO threshold to %d\n",
427 dev->name, fifo & 0xff);
428 SMC_SET_FIFO_INT(lp, fifo);
430 SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_));
431 lp->rxdma_active = 1;
432 lp->current_rx_skb = skb;
433 SMC_PULL_DATA(lp, data, (pkt_len+2+15) & ~15);
434 /* Packet processing deferred to DMA RX interrupt */
437 SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_));
438 SMC_PULL_DATA(lp, data, pkt_len+2+3);
440 DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name);
441 PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64);
442 skb->protocol = eth_type_trans(skb, dev);
444 dev->stats.rx_packets++;
445 dev->stats.rx_bytes += pkt_len-4;
451 * This is called to actually send a packet to the chip.
453 static void smc911x_hardware_send_pkt(struct net_device *dev)
455 struct smc911x_local *lp = netdev_priv(dev);
457 unsigned int cmdA, cmdB, len;
460 DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __func__);
461 BUG_ON(lp->pending_tx_skb == NULL);
463 skb = lp->pending_tx_skb;
464 lp->pending_tx_skb = NULL;
466 /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */
467 /* cmdB {31:16] pkt tag [10:0] length */
469 /* 16 byte buffer alignment mode */
470 buf = (char*)((u32)(skb->data) & ~0xF);
471 len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF;
472 cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) |
473 TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
476 buf = (char*)((u32)skb->data & ~0x3);
477 len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3;
478 cmdA = (((u32)skb->data & 0x3) << 16) |
479 TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
482 /* tag is packet length so we can use this in stats update later */
483 cmdB = (skb->len << 16) | (skb->len & 0x7FF);
485 DBG(SMC_DEBUG_TX, "%s: TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n",
486 dev->name, len, len, buf, cmdA, cmdB);
487 SMC_SET_TX_FIFO(lp, cmdA);
488 SMC_SET_TX_FIFO(lp, cmdB);
490 DBG(SMC_DEBUG_PKTS, "%s: Transmitted packet\n", dev->name);
491 PRINT_PKT(buf, len <= 64 ? len : 64);
493 /* Send pkt via PIO or DMA */
495 lp->current_tx_skb = skb;
496 SMC_PUSH_DATA(lp, buf, len);
497 /* DMA complete IRQ will free buffer and set jiffies */
499 SMC_PUSH_DATA(lp, buf, len);
500 dev->trans_start = jiffies;
501 dev_kfree_skb_irq(skb);
503 if (!lp->tx_throttle) {
504 netif_wake_queue(dev);
506 SMC_ENABLE_INT(lp, INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_);
510 * Since I am not sure if I will have enough room in the chip's ram
511 * to store the packet, I call this routine which either sends it
512 * now, or set the card to generates an interrupt when ready
515 static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
517 struct smc911x_local *lp = netdev_priv(dev);
521 DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
522 dev->name, __func__);
524 spin_lock_irqsave(&lp->lock, flags);
526 BUG_ON(lp->pending_tx_skb != NULL);
528 free = SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TDFREE_;
529 DBG(SMC_DEBUG_TX, "%s: TX free space %d\n", dev->name, free);
531 /* Turn off the flow when running out of space in FIFO */
532 if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) {
533 DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n",
535 /* Reenable when at least 1 packet of size MTU present */
536 SMC_SET_FIFO_TDA(lp, (SMC911X_TX_FIFO_LOW_THRESHOLD)/64);
538 netif_stop_queue(dev);
541 /* Drop packets when we run out of space in TX FIFO
542 * Account for overhead required for:
544 * Tx command words 8 bytes
545 * Start offset 15 bytes
546 * End padding 15 bytes
548 if (unlikely(free < (skb->len + 8 + 15 + 15))) {
549 printk("%s: No Tx free space %d < %d\n",
550 dev->name, free, skb->len);
551 lp->pending_tx_skb = NULL;
552 dev->stats.tx_errors++;
553 dev->stats.tx_dropped++;
554 spin_unlock_irqrestore(&lp->lock, flags);
561 /* If the DMA is already running then defer this packet Tx until
562 * the DMA IRQ starts it
564 if (lp->txdma_active) {
565 DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Tx DMA running, deferring packet\n", dev->name);
566 lp->pending_tx_skb = skb;
567 netif_stop_queue(dev);
568 spin_unlock_irqrestore(&lp->lock, flags);
571 DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Activating Tx DMA\n", dev->name);
572 lp->txdma_active = 1;
576 lp->pending_tx_skb = skb;
577 smc911x_hardware_send_pkt(dev);
578 spin_unlock_irqrestore(&lp->lock, flags);
584 * This handles a TX status interrupt, which is only called when:
585 * - a TX error occurred, or
586 * - TX of a packet completed.
588 static void smc911x_tx(struct net_device *dev)
590 struct smc911x_local *lp = netdev_priv(dev);
591 unsigned int tx_status;
593 DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
594 dev->name, __func__);
596 /* Collect the TX status */
597 while (((SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16) != 0) {
598 DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n",
600 (SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16);
601 tx_status = SMC_GET_TX_STS_FIFO(lp);
602 dev->stats.tx_packets++;
603 dev->stats.tx_bytes+=tx_status>>16;
604 DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n",
605 dev->name, (tx_status & 0xffff0000) >> 16,
606 tx_status & 0x0000ffff);
607 /* count Tx errors, but ignore lost carrier errors when in
608 * full-duplex mode */
609 if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx &&
610 !(tx_status & 0x00000306))) {
611 dev->stats.tx_errors++;
613 if (tx_status & TX_STS_MANY_COLL_) {
614 dev->stats.collisions+=16;
615 dev->stats.tx_aborted_errors++;
617 dev->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3;
619 /* carrier error only has meaning for half-duplex communication */
620 if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) &&
622 dev->stats.tx_carrier_errors++;
624 if (tx_status & TX_STS_LATE_COLL_) {
625 dev->stats.collisions++;
626 dev->stats.tx_aborted_errors++;
632 /*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
634 * Reads a register from the MII Management serial interface
637 static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg)
639 struct smc911x_local *lp = netdev_priv(dev);
640 unsigned int phydata;
642 SMC_GET_MII(lp, phyreg, phyaddr, phydata);
644 DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n",
645 __func__, phyaddr, phyreg, phydata);
651 * Writes a register to the MII Management serial interface
653 static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg,
656 struct smc911x_local *lp = netdev_priv(dev);
658 DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
659 __func__, phyaddr, phyreg, phydata);
661 SMC_SET_MII(lp, phyreg, phyaddr, phydata);
665 * Finds and reports the PHY address (115 and 117 have external
666 * PHY interface 118 has internal only
668 static void smc911x_phy_detect(struct net_device *dev)
670 struct smc911x_local *lp = netdev_priv(dev);
672 unsigned int cfg, id1, id2;
674 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
679 * Scan all 32 PHY addresses if necessary, starting at
680 * PHY#1 to PHY#31, and then PHY#0 last.
682 switch(lp->version) {
687 cfg = SMC_GET_HW_CFG(lp);
688 if (cfg & HW_CFG_EXT_PHY_DET_) {
689 cfg &= ~HW_CFG_PHY_CLK_SEL_;
690 cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
691 SMC_SET_HW_CFG(lp, cfg);
692 udelay(10); /* Wait for clocks to stop */
694 cfg |= HW_CFG_EXT_PHY_EN_;
695 SMC_SET_HW_CFG(lp, cfg);
696 udelay(10); /* Wait for clocks to stop */
698 cfg &= ~HW_CFG_PHY_CLK_SEL_;
699 cfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
700 SMC_SET_HW_CFG(lp, cfg);
701 udelay(10); /* Wait for clocks to stop */
703 cfg |= HW_CFG_SMI_SEL_;
704 SMC_SET_HW_CFG(lp, cfg);
706 for (phyaddr = 1; phyaddr < 32; ++phyaddr) {
708 /* Read the PHY identifiers */
709 SMC_GET_PHY_ID1(lp, phyaddr & 31, id1);
710 SMC_GET_PHY_ID2(lp, phyaddr & 31, id2);
712 /* Make sure it is a valid identifier */
713 if (id1 != 0x0000 && id1 != 0xffff &&
714 id1 != 0x8000 && id2 != 0x0000 &&
715 id2 != 0xffff && id2 != 0x8000) {
716 /* Save the PHY's address */
717 lp->mii.phy_id = phyaddr & 31;
718 lp->phy_type = id1 << 16 | id2;
723 /* Found an external PHY */
727 /* Internal media only */
728 SMC_GET_PHY_ID1(lp, 1, id1);
729 SMC_GET_PHY_ID2(lp, 1, id2);
730 /* Save the PHY's address */
732 lp->phy_type = id1 << 16 | id2;
735 DBG(SMC_DEBUG_MISC, "%s: phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n",
736 dev->name, id1, id2, lp->mii.phy_id);
740 * Sets the PHY to a configuration as determined by the user.
741 * Called with spin_lock held.
743 static int smc911x_phy_fixed(struct net_device *dev)
745 struct smc911x_local *lp = netdev_priv(dev);
746 int phyaddr = lp->mii.phy_id;
749 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
751 /* Enter Link Disable state */
752 SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
754 SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
757 * Set our fixed capabilities
758 * Disable auto-negotiation
760 bmcr &= ~BMCR_ANENABLE;
762 bmcr |= BMCR_FULLDPLX;
764 if (lp->ctl_rspeed == 100)
765 bmcr |= BMCR_SPEED100;
767 /* Write our capabilities to the phy control register */
768 SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
770 /* Re-Configure the Receive/Phy Control register */
772 SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
778 * smc911x_phy_reset - reset the phy
782 * Issue a software reset for the specified PHY and
783 * wait up to 100ms for the reset to complete. We should
784 * not access the PHY for 50ms after issuing the reset.
786 * The time to wait appears to be dependent on the PHY.
789 static int smc911x_phy_reset(struct net_device *dev, int phy)
791 struct smc911x_local *lp = netdev_priv(dev);
796 DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__);
798 spin_lock_irqsave(&lp->lock, flags);
799 reg = SMC_GET_PMT_CTRL(lp);
801 reg |= PMT_CTRL_PHY_RST_;
802 SMC_SET_PMT_CTRL(lp, reg);
803 spin_unlock_irqrestore(&lp->lock, flags);
804 for (timeout = 2; timeout; timeout--) {
806 spin_lock_irqsave(&lp->lock, flags);
807 reg = SMC_GET_PMT_CTRL(lp);
808 spin_unlock_irqrestore(&lp->lock, flags);
809 if (!(reg & PMT_CTRL_PHY_RST_)) {
810 /* extra delay required because the phy may
811 * not be completed with its reset
812 * when PHY_BCR_RESET_ is cleared. 256us
813 * should suffice, but use 500us to be safe
820 return reg & PMT_CTRL_PHY_RST_;
824 * smc911x_phy_powerdown - powerdown phy
828 * Power down the specified PHY
830 static void smc911x_phy_powerdown(struct net_device *dev, int phy)
832 struct smc911x_local *lp = netdev_priv(dev);
835 /* Enter Link Disable state */
836 SMC_GET_PHY_BMCR(lp, phy, bmcr);
838 SMC_SET_PHY_BMCR(lp, phy, bmcr);
842 * smc911x_phy_check_media - check the media status and adjust BMCR
844 * @init: set true for initialisation
846 * Select duplex mode depending on negotiation state. This
847 * also updates our carrier state.
849 static void smc911x_phy_check_media(struct net_device *dev, int init)
851 struct smc911x_local *lp = netdev_priv(dev);
852 int phyaddr = lp->mii.phy_id;
853 unsigned int bmcr, cr;
855 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
857 if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
858 /* duplex state has changed */
859 SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
860 SMC_GET_MAC_CR(lp, cr);
861 if (lp->mii.full_duplex) {
862 DBG(SMC_DEBUG_MISC, "%s: Configuring for full-duplex mode\n", dev->name);
863 bmcr |= BMCR_FULLDPLX;
864 cr |= MAC_CR_RCVOWN_;
866 DBG(SMC_DEBUG_MISC, "%s: Configuring for half-duplex mode\n", dev->name);
867 bmcr &= ~BMCR_FULLDPLX;
868 cr &= ~MAC_CR_RCVOWN_;
870 SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
871 SMC_SET_MAC_CR(lp, cr);
876 * Configures the specified PHY through the MII management interface
877 * using Autonegotiation.
878 * Calls smc911x_phy_fixed() if the user has requested a certain config.
879 * If RPC ANEG bit is set, the media selection is dependent purely on
880 * the selection by the MII (either in the MII BMCR reg or the result
881 * of autonegotiation.) If the RPC ANEG bit is cleared, the selection
882 * is controlled by the RPC SPEED and RPC DPLX bits.
884 static void smc911x_phy_configure(struct work_struct *work)
886 struct smc911x_local *lp = container_of(work, struct smc911x_local,
888 struct net_device *dev = lp->netdev;
889 int phyaddr = lp->mii.phy_id;
890 int my_phy_caps; /* My PHY capabilities */
891 int my_ad_caps; /* My Advertised capabilities */
895 DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__);
898 * We should not be called if phy_type is zero.
900 if (lp->phy_type == 0)
903 if (smc911x_phy_reset(dev, phyaddr)) {
904 printk("%s: PHY reset timed out\n", dev->name);
907 spin_lock_irqsave(&lp->lock, flags);
910 * Enable PHY Interrupts (for register 18)
911 * Interrupts listed here are enabled
913 SMC_SET_PHY_INT_MASK(lp, phyaddr, PHY_INT_MASK_ENERGY_ON_ |
914 PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_REMOTE_FAULT_ |
915 PHY_INT_MASK_LINK_DOWN_);
917 /* If the user requested no auto neg, then go set his request */
918 if (lp->mii.force_media) {
919 smc911x_phy_fixed(dev);
920 goto smc911x_phy_configure_exit;
923 /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
924 SMC_GET_PHY_BMSR(lp, phyaddr, my_phy_caps);
925 if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
926 printk(KERN_INFO "Auto negotiation NOT supported\n");
927 smc911x_phy_fixed(dev);
928 goto smc911x_phy_configure_exit;
931 /* CSMA capable w/ both pauses */
932 my_ad_caps = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
934 if (my_phy_caps & BMSR_100BASE4)
935 my_ad_caps |= ADVERTISE_100BASE4;
936 if (my_phy_caps & BMSR_100FULL)
937 my_ad_caps |= ADVERTISE_100FULL;
938 if (my_phy_caps & BMSR_100HALF)
939 my_ad_caps |= ADVERTISE_100HALF;
940 if (my_phy_caps & BMSR_10FULL)
941 my_ad_caps |= ADVERTISE_10FULL;
942 if (my_phy_caps & BMSR_10HALF)
943 my_ad_caps |= ADVERTISE_10HALF;
945 /* Disable capabilities not selected by our user */
946 if (lp->ctl_rspeed != 100)
947 my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF);
949 if (!lp->ctl_rfduplx)
950 my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL);
952 /* Update our Auto-Neg Advertisement Register */
953 SMC_SET_PHY_MII_ADV(lp, phyaddr, my_ad_caps);
954 lp->mii.advertising = my_ad_caps;
957 * Read the register back. Without this, it appears that when
958 * auto-negotiation is restarted, sometimes it isn't ready and
959 * the link does not come up.
962 SMC_GET_PHY_MII_ADV(lp, phyaddr, status);
964 DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps);
965 DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps);
967 /* Restart auto-negotiation process in order to advertise my caps */
968 SMC_SET_PHY_BMCR(lp, phyaddr, BMCR_ANENABLE | BMCR_ANRESTART);
970 smc911x_phy_check_media(dev, 1);
972 smc911x_phy_configure_exit:
973 spin_unlock_irqrestore(&lp->lock, flags);
977 * smc911x_phy_interrupt
979 * Purpose: Handle interrupts relating to PHY register 18. This is
980 * called from the "hard" interrupt handler under our private spinlock.
982 static void smc911x_phy_interrupt(struct net_device *dev)
984 struct smc911x_local *lp = netdev_priv(dev);
985 int phyaddr = lp->mii.phy_id;
988 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
990 if (lp->phy_type == 0)
993 smc911x_phy_check_media(dev, 0);
994 /* read to clear status bits */
995 SMC_GET_PHY_INT_SRC(lp, phyaddr,status);
996 DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n",
997 dev->name, status & 0xffff);
998 DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n",
999 dev->name, SMC_GET_AFC_CFG(lp));
1002 /*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
1005 * This is the main routine of the driver, to handle the device when
1006 * it needs some attention.
1008 static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
1010 struct net_device *dev = dev_id;
1011 struct smc911x_local *lp = netdev_priv(dev);
1012 unsigned int status, mask, timeout;
1013 unsigned int rx_overrun=0, cr, pkts;
1014 unsigned long flags;
1016 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1018 spin_lock_irqsave(&lp->lock, flags);
1020 /* Spurious interrupt check */
1021 if ((SMC_GET_IRQ_CFG(lp) & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) !=
1022 (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) {
1023 spin_unlock_irqrestore(&lp->lock, flags);
1027 mask = SMC_GET_INT_EN(lp);
1028 SMC_SET_INT_EN(lp, 0);
1030 /* set a timeout value, so I don't stay here forever */
1035 status = SMC_GET_INT(lp);
1037 DBG(SMC_DEBUG_MISC, "%s: INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n",
1038 dev->name, status, mask, status & ~mask);
1044 /* Handle SW interrupt condition */
1045 if (status & INT_STS_SW_INT_) {
1046 SMC_ACK_INT(lp, INT_STS_SW_INT_);
1047 mask &= ~INT_EN_SW_INT_EN_;
1049 /* Handle various error conditions */
1050 if (status & INT_STS_RXE_) {
1051 SMC_ACK_INT(lp, INT_STS_RXE_);
1052 dev->stats.rx_errors++;
1054 if (status & INT_STS_RXDFH_INT_) {
1055 SMC_ACK_INT(lp, INT_STS_RXDFH_INT_);
1056 dev->stats.rx_dropped+=SMC_GET_RX_DROP(lp);
1058 /* Undocumented interrupt-what is the right thing to do here? */
1059 if (status & INT_STS_RXDF_INT_) {
1060 SMC_ACK_INT(lp, INT_STS_RXDF_INT_);
1063 /* Rx Data FIFO exceeds set level */
1064 if (status & INT_STS_RDFL_) {
1065 if (IS_REV_A(lp->revision)) {
1067 SMC_GET_MAC_CR(lp, cr);
1068 cr &= ~MAC_CR_RXEN_;
1069 SMC_SET_MAC_CR(lp, cr);
1070 DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
1071 dev->stats.rx_errors++;
1072 dev->stats.rx_fifo_errors++;
1074 SMC_ACK_INT(lp, INT_STS_RDFL_);
1076 if (status & INT_STS_RDFO_) {
1077 if (!IS_REV_A(lp->revision)) {
1078 SMC_GET_MAC_CR(lp, cr);
1079 cr &= ~MAC_CR_RXEN_;
1080 SMC_SET_MAC_CR(lp, cr);
1082 DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
1083 dev->stats.rx_errors++;
1084 dev->stats.rx_fifo_errors++;
1086 SMC_ACK_INT(lp, INT_STS_RDFO_);
1088 /* Handle receive condition */
1089 if ((status & INT_STS_RSFL_) || rx_overrun) {
1091 DBG(SMC_DEBUG_RX, "%s: RX irq\n", dev->name);
1092 fifo = SMC_GET_RX_FIFO_INF(lp);
1093 pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16;
1094 DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n",
1095 dev->name, pkts, fifo & 0xFFFF );
1099 if (lp->rxdma_active){
1100 DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
1101 "%s: RX DMA active\n", dev->name);
1102 /* The DMA is already running so up the IRQ threshold */
1103 fifo = SMC_GET_FIFO_INT(lp) & ~0xFF;
1104 fifo |= pkts & 0xFF;
1106 "%s: Setting RX stat FIFO threshold to %d\n",
1107 dev->name, fifo & 0xff);
1108 SMC_SET_FIFO_INT(lp, fifo);
1113 SMC_ACK_INT(lp, INT_STS_RSFL_);
1115 /* Handle transmit FIFO available */
1116 if (status & INT_STS_TDFA_) {
1117 DBG(SMC_DEBUG_TX, "%s: TX data FIFO space available irq\n", dev->name);
1118 SMC_SET_FIFO_TDA(lp, 0xFF);
1119 lp->tx_throttle = 0;
1121 if (!lp->txdma_active)
1123 netif_wake_queue(dev);
1124 SMC_ACK_INT(lp, INT_STS_TDFA_);
1126 /* Handle transmit done condition */
1128 if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) {
1129 DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC,
1130 "%s: Tx stat FIFO limit (%d) /GPT irq\n",
1131 dev->name, (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16);
1133 SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
1134 SMC_ACK_INT(lp, INT_STS_TSFL_);
1135 SMC_ACK_INT(lp, INT_STS_TSFL_ | INT_STS_GPT_INT_);
1138 if (status & INT_STS_TSFL_) {
1139 DBG(SMC_DEBUG_TX, "%s: TX status FIFO limit (%d) irq \n", dev->name, );
1141 SMC_ACK_INT(lp, INT_STS_TSFL_);
1144 if (status & INT_STS_GPT_INT_) {
1145 DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n",
1147 SMC_GET_IRQ_CFG(lp),
1148 SMC_GET_FIFO_INT(lp),
1149 SMC_GET_RX_CFG(lp));
1150 DBG(SMC_DEBUG_RX, "%s: Rx Stat FIFO Used 0x%02x "
1151 "Data FIFO Used 0x%04x Stat FIFO 0x%08x\n",
1153 (SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16,
1154 SMC_GET_RX_FIFO_INF(lp) & 0xffff,
1155 SMC_GET_RX_STS_FIFO_PEEK(lp));
1156 SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
1157 SMC_ACK_INT(lp, INT_STS_GPT_INT_);
1161 /* Handle PHY interrupt condition */
1162 if (status & INT_STS_PHY_INT_) {
1163 DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name);
1164 smc911x_phy_interrupt(dev);
1165 SMC_ACK_INT(lp, INT_STS_PHY_INT_);
1167 } while (--timeout);
1169 /* restore mask state */
1170 SMC_SET_INT_EN(lp, mask);
1172 DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n",
1173 dev->name, 8-timeout);
1175 spin_unlock_irqrestore(&lp->lock, flags);
1182 smc911x_tx_dma_irq(int dma, void *data)
1184 struct net_device *dev = (struct net_device *)data;
1185 struct smc911x_local *lp = netdev_priv(dev);
1186 struct sk_buff *skb = lp->current_tx_skb;
1187 unsigned long flags;
1189 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1191 DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: TX DMA irq handler\n", dev->name);
1192 /* Clear the DMA interrupt sources */
1193 SMC_DMA_ACK_IRQ(dev, dma);
1194 BUG_ON(skb == NULL);
1195 dma_unmap_single(NULL, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE);
1196 dev->trans_start = jiffies;
1197 dev_kfree_skb_irq(skb);
1198 lp->current_tx_skb = NULL;
1199 if (lp->pending_tx_skb != NULL)
1200 smc911x_hardware_send_pkt(dev);
1202 DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
1203 "%s: No pending Tx packets. DMA disabled\n", dev->name);
1204 spin_lock_irqsave(&lp->lock, flags);
1205 lp->txdma_active = 0;
1206 if (!lp->tx_throttle) {
1207 netif_wake_queue(dev);
1209 spin_unlock_irqrestore(&lp->lock, flags);
1212 DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
1213 "%s: TX DMA irq completed\n", dev->name);
1216 smc911x_rx_dma_irq(int dma, void *data)
1218 struct net_device *dev = (struct net_device *)data;
1219 unsigned long ioaddr = dev->base_addr;
1220 struct smc911x_local *lp = netdev_priv(dev);
1221 struct sk_buff *skb = lp->current_rx_skb;
1222 unsigned long flags;
1225 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1226 DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, "%s: RX DMA irq handler\n", dev->name);
1227 /* Clear the DMA interrupt sources */
1228 SMC_DMA_ACK_IRQ(dev, dma);
1229 dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE);
1230 BUG_ON(skb == NULL);
1231 lp->current_rx_skb = NULL;
1232 PRINT_PKT(skb->data, skb->len);
1233 skb->protocol = eth_type_trans(skb, dev);
1234 dev->stats.rx_packets++;
1235 dev->stats.rx_bytes += skb->len;
1238 spin_lock_irqsave(&lp->lock, flags);
1239 pkts = (SMC_GET_RX_FIFO_INF(lp) & RX_FIFO_INF_RXSUSED_) >> 16;
1243 lp->rxdma_active = 0;
1245 spin_unlock_irqrestore(&lp->lock, flags);
1246 DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
1247 "%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n",
1250 #endif /* SMC_USE_DMA */
1252 #ifdef CONFIG_NET_POLL_CONTROLLER
1254 * Polling receive - used by netconsole and other diagnostic tools
1255 * to allow network i/o with interrupts disabled.
1257 static void smc911x_poll_controller(struct net_device *dev)
1259 disable_irq(dev->irq);
1260 smc911x_interrupt(dev->irq, dev);
1261 enable_irq(dev->irq);
1265 /* Our watchdog timed out. Called by the networking layer */
1266 static void smc911x_timeout(struct net_device *dev)
1268 struct smc911x_local *lp = netdev_priv(dev);
1270 unsigned long flags;
1272 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1274 spin_lock_irqsave(&lp->lock, flags);
1275 status = SMC_GET_INT(lp);
1276 mask = SMC_GET_INT_EN(lp);
1277 spin_unlock_irqrestore(&lp->lock, flags);
1278 DBG(SMC_DEBUG_MISC, "%s: INT 0x%02x MASK 0x%02x \n",
1279 dev->name, status, mask);
1281 /* Dump the current TX FIFO contents and restart */
1282 mask = SMC_GET_TX_CFG(lp);
1283 SMC_SET_TX_CFG(lp, mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_);
1285 * Reconfiguring the PHY doesn't seem like a bad idea here, but
1286 * smc911x_phy_configure() calls msleep() which calls schedule_timeout()
1287 * which calls schedule(). Hence we use a work queue.
1289 if (lp->phy_type != 0)
1290 schedule_work(&lp->phy_configure);
1292 /* We can accept TX packets again */
1293 dev->trans_start = jiffies;
1294 netif_wake_queue(dev);
1298 * This routine will, depending on the values passed to it,
1299 * either make it accept multicast packets, go into
1300 * promiscuous mode (for TCPDUMP and cousins) or accept
1301 * a select set of multicast packets
1303 static void smc911x_set_multicast_list(struct net_device *dev)
1305 struct smc911x_local *lp = netdev_priv(dev);
1306 unsigned int multicast_table[2];
1307 unsigned int mcr, update_multicast = 0;
1308 unsigned long flags;
1310 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1312 spin_lock_irqsave(&lp->lock, flags);
1313 SMC_GET_MAC_CR(lp, mcr);
1314 spin_unlock_irqrestore(&lp->lock, flags);
1316 if (dev->flags & IFF_PROMISC) {
1318 DBG(SMC_DEBUG_MISC, "%s: RCR_PRMS\n", dev->name);
1319 mcr |= MAC_CR_PRMS_;
1322 * Here, I am setting this to accept all multicast packets.
1323 * I don't need to zero the multicast table, because the flag is
1324 * checked before the table is
1326 else if (dev->flags & IFF_ALLMULTI || dev->mc_count > 16) {
1327 DBG(SMC_DEBUG_MISC, "%s: RCR_ALMUL\n", dev->name);
1328 mcr |= MAC_CR_MCPAS_;
1332 * This sets the internal hardware table to filter out unwanted
1333 * multicast packets before they take up memory.
1335 * The SMC chip uses a hash table where the high 6 bits of the CRC of
1336 * address are the offset into the table. If that bit is 1, then the
1337 * multicast packet is accepted. Otherwise, it's dropped silently.
1339 * To use the 6 bits as an offset into the table, the high 1 bit is
1340 * the number of the 32 bit register, while the low 5 bits are the bit
1341 * within that register.
1343 else if (dev->mc_count) {
1345 struct dev_mc_list *cur_addr;
1347 /* Set the Hash perfec mode */
1348 mcr |= MAC_CR_HPFILT_;
1350 /* start with a table of all zeros: reject all */
1351 memset(multicast_table, 0, sizeof(multicast_table));
1353 cur_addr = dev->mc_list;
1354 for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) {
1357 /* do we have a pointer here? */
1360 /* make sure this is a multicast address -
1361 shouldn't this be a given if we have it here ? */
1362 if (!(*cur_addr->dmi_addr & 1))
1365 /* upper 6 bits are used as hash index */
1366 position = ether_crc(ETH_ALEN, cur_addr->dmi_addr)>>26;
1368 multicast_table[position>>5] |= 1 << (position&0x1f);
1371 /* be sure I get rid of flags I might have set */
1372 mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
1374 /* now, the table can be loaded into the chipset */
1375 update_multicast = 1;
1377 DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n",
1379 mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
1382 * since I'm disabling all multicast entirely, I need to
1383 * clear the multicast list
1385 memset(multicast_table, 0, sizeof(multicast_table));
1386 update_multicast = 1;
1389 spin_lock_irqsave(&lp->lock, flags);
1390 SMC_SET_MAC_CR(lp, mcr);
1391 if (update_multicast) {
1393 "%s: update mcast hash table 0x%08x 0x%08x\n",
1394 dev->name, multicast_table[0], multicast_table[1]);
1395 SMC_SET_HASHL(lp, multicast_table[0]);
1396 SMC_SET_HASHH(lp, multicast_table[1]);
1398 spin_unlock_irqrestore(&lp->lock, flags);
1403 * Open and Initialize the board
1405 * Set up everything, reset the card, etc..
1408 smc911x_open(struct net_device *dev)
1410 struct smc911x_local *lp = netdev_priv(dev);
1412 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1415 * Check that the address is valid. If its not, refuse
1416 * to bring the device up. The user must specify an
1417 * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
1419 if (!is_valid_ether_addr(dev->dev_addr)) {
1420 PRINTK("%s: no valid ethernet hw addr\n", __func__);
1424 /* reset the hardware */
1427 /* Configure the PHY, initialize the link state */
1428 smc911x_phy_configure(&lp->phy_configure);
1430 /* Turn on Tx + Rx */
1431 smc911x_enable(dev);
1433 netif_start_queue(dev);
1441 * this makes the board clean up everything that it can
1442 * and not talk to the outside world. Caused by
1443 * an 'ifconfig ethX down'
1445 static int smc911x_close(struct net_device *dev)
1447 struct smc911x_local *lp = netdev_priv(dev);
1449 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1451 netif_stop_queue(dev);
1452 netif_carrier_off(dev);
1454 /* clear everything */
1455 smc911x_shutdown(dev);
1457 if (lp->phy_type != 0) {
1458 /* We need to ensure that no calls to
1459 * smc911x_phy_configure are pending.
1461 cancel_work_sync(&lp->phy_configure);
1462 smc911x_phy_powerdown(dev, lp->mii.phy_id);
1465 if (lp->pending_tx_skb) {
1466 dev_kfree_skb(lp->pending_tx_skb);
1467 lp->pending_tx_skb = NULL;
1477 smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
1479 struct smc911x_local *lp = netdev_priv(dev);
1481 unsigned long flags;
1483 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1487 if (lp->phy_type != 0) {
1488 spin_lock_irqsave(&lp->lock, flags);
1489 ret = mii_ethtool_gset(&lp->mii, cmd);
1490 spin_unlock_irqrestore(&lp->lock, flags);
1492 cmd->supported = SUPPORTED_10baseT_Half |
1493 SUPPORTED_10baseT_Full |
1494 SUPPORTED_TP | SUPPORTED_AUI;
1496 if (lp->ctl_rspeed == 10)
1497 cmd->speed = SPEED_10;
1498 else if (lp->ctl_rspeed == 100)
1499 cmd->speed = SPEED_100;
1501 cmd->autoneg = AUTONEG_DISABLE;
1502 if (lp->mii.phy_id==1)
1503 cmd->transceiver = XCVR_INTERNAL;
1505 cmd->transceiver = XCVR_EXTERNAL;
1507 SMC_GET_PHY_SPECIAL(lp, lp->mii.phy_id, status);
1509 (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ?
1510 DUPLEX_FULL : DUPLEX_HALF;
1518 smc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
1520 struct smc911x_local *lp = netdev_priv(dev);
1522 unsigned long flags;
1524 if (lp->phy_type != 0) {
1525 spin_lock_irqsave(&lp->lock, flags);
1526 ret = mii_ethtool_sset(&lp->mii, cmd);
1527 spin_unlock_irqrestore(&lp->lock, flags);
1529 if (cmd->autoneg != AUTONEG_DISABLE ||
1530 cmd->speed != SPEED_10 ||
1531 (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) ||
1532 (cmd->port != PORT_TP && cmd->port != PORT_AUI))
1535 lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL;
1544 smc911x_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1546 strncpy(info->driver, CARDNAME, sizeof(info->driver));
1547 strncpy(info->version, version, sizeof(info->version));
1548 strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
1551 static int smc911x_ethtool_nwayreset(struct net_device *dev)
1553 struct smc911x_local *lp = netdev_priv(dev);
1555 unsigned long flags;
1557 if (lp->phy_type != 0) {
1558 spin_lock_irqsave(&lp->lock, flags);
1559 ret = mii_nway_restart(&lp->mii);
1560 spin_unlock_irqrestore(&lp->lock, flags);
1566 static u32 smc911x_ethtool_getmsglevel(struct net_device *dev)
1568 struct smc911x_local *lp = netdev_priv(dev);
1569 return lp->msg_enable;
1572 static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level)
1574 struct smc911x_local *lp = netdev_priv(dev);
1575 lp->msg_enable = level;
1578 static int smc911x_ethtool_getregslen(struct net_device *dev)
1580 /* System regs + MAC regs + PHY regs */
1581 return (((E2P_CMD - ID_REV)/4 + 1) +
1582 (WUCSR - MAC_CR)+1 + 32) * sizeof(u32);
1585 static void smc911x_ethtool_getregs(struct net_device *dev,
1586 struct ethtool_regs* regs, void *buf)
1588 struct smc911x_local *lp = netdev_priv(dev);
1589 unsigned long flags;
1591 u32 *data = (u32*)buf;
1593 regs->version = lp->version;
1594 for(i=ID_REV;i<=E2P_CMD;i+=4) {
1595 data[j++] = SMC_inl(lp, i);
1597 for(i=MAC_CR;i<=WUCSR;i++) {
1598 spin_lock_irqsave(&lp->lock, flags);
1599 SMC_GET_MAC_CSR(lp, i, reg);
1600 spin_unlock_irqrestore(&lp->lock, flags);
1603 for(i=0;i<=31;i++) {
1604 spin_lock_irqsave(&lp->lock, flags);
1605 SMC_GET_MII(lp, i, lp->mii.phy_id, reg);
1606 spin_unlock_irqrestore(&lp->lock, flags);
1607 data[j++] = reg & 0xFFFF;
1611 static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev)
1613 struct smc911x_local *lp = netdev_priv(dev);
1614 unsigned int timeout;
1617 e2p_cmd = SMC_GET_E2P_CMD(lp);
1618 for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) {
1619 if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) {
1620 PRINTK("%s: %s timeout waiting for EEPROM to respond\n",
1621 dev->name, __func__);
1625 e2p_cmd = SMC_GET_E2P_CMD(lp);
1628 PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n",
1629 dev->name, __func__);
1635 static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev,
1638 struct smc911x_local *lp = netdev_priv(dev);
1641 if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
1643 SMC_SET_E2P_CMD(lp, E2P_CMD_EPC_BUSY_ |
1644 ((cmd) & (0x7<<28)) |
1649 static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev,
1652 struct smc911x_local *lp = netdev_priv(dev);
1655 if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
1657 *data = SMC_GET_E2P_DATA(lp);
1661 static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev,
1664 struct smc911x_local *lp = netdev_priv(dev);
1667 if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
1669 SMC_SET_E2P_DATA(lp, data);
1673 static int smc911x_ethtool_geteeprom(struct net_device *dev,
1674 struct ethtool_eeprom *eeprom, u8 *data)
1676 u8 eebuf[SMC911X_EEPROM_LEN];
1679 for(i=0;i<SMC911X_EEPROM_LEN;i++) {
1680 if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ_, i ))!=0)
1682 if ((ret=smc911x_ethtool_read_eeprom_byte(dev, &eebuf[i]))!=0)
1685 memcpy(data, eebuf+eeprom->offset, eeprom->len);
1689 static int smc911x_ethtool_seteeprom(struct net_device *dev,
1690 struct ethtool_eeprom *eeprom, u8 *data)
1695 if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN_, 0 ))!=0)
1697 for(i=eeprom->offset;i<(eeprom->offset+eeprom->len);i++) {
1699 if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE_, i ))!=0)
1702 if ((ret=smc911x_ethtool_write_eeprom_byte(dev, *data))!=0)
1704 if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE_, i ))!=0)
1710 static int smc911x_ethtool_geteeprom_len(struct net_device *dev)
1712 return SMC911X_EEPROM_LEN;
1715 static const struct ethtool_ops smc911x_ethtool_ops = {
1716 .get_settings = smc911x_ethtool_getsettings,
1717 .set_settings = smc911x_ethtool_setsettings,
1718 .get_drvinfo = smc911x_ethtool_getdrvinfo,
1719 .get_msglevel = smc911x_ethtool_getmsglevel,
1720 .set_msglevel = smc911x_ethtool_setmsglevel,
1721 .nway_reset = smc911x_ethtool_nwayreset,
1722 .get_link = ethtool_op_get_link,
1723 .get_regs_len = smc911x_ethtool_getregslen,
1724 .get_regs = smc911x_ethtool_getregs,
1725 .get_eeprom_len = smc911x_ethtool_geteeprom_len,
1726 .get_eeprom = smc911x_ethtool_geteeprom,
1727 .set_eeprom = smc911x_ethtool_seteeprom,
1733 * This routine has a simple purpose -- make the SMC chip generate an
1734 * interrupt, so an auto-detect routine can detect it, and find the IRQ,
1736 static int __devinit smc911x_findirq(struct net_device *dev)
1738 struct smc911x_local *lp = netdev_priv(dev);
1740 unsigned long cookie;
1742 DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
1744 cookie = probe_irq_on();
1747 * Force a SW interrupt
1750 SMC_SET_INT_EN(lp, INT_EN_SW_INT_EN_);
1753 * Wait until positive that the interrupt has been generated
1758 int_status = SMC_GET_INT_EN(lp);
1759 if (int_status & INT_EN_SW_INT_EN_)
1760 break; /* got the interrupt */
1761 } while (--timeout);
1764 * there is really nothing that I can do here if timeout fails,
1765 * as autoirq_report will return a 0 anyway, which is what I
1766 * want in this case. Plus, the clean up is needed in both
1770 /* and disable all interrupts again */
1771 SMC_SET_INT_EN(lp, 0);
1773 /* and return what I found */
1774 return probe_irq_off(cookie);
1778 * Function: smc911x_probe(unsigned long ioaddr)
1781 * Tests to see if a given ioaddr points to an SMC911x chip.
1782 * Returns a 0 on success
1785 * (1) see if the endian word is OK
1786 * (1) see if I recognize the chip ID in the appropriate register
1788 * Here I do typical initialization tasks.
1790 * o Initialize the structure if needed
1791 * o print out my vanity message if not done so already
1792 * o print out what type of hardware is detected
1793 * o print out the ethernet address
1795 * o set up my private data
1796 * o configure the dev structure with my subroutines
1797 * o actually GRAB the irq.
1800 static int __devinit smc911x_probe(struct net_device *dev)
1802 struct smc911x_local *lp = netdev_priv(dev);
1804 unsigned int val, chip_id, revision;
1805 const char *version_string;
1806 unsigned long irq_flags;
1808 DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1810 /* First, see if the endian word is recognized */
1811 val = SMC_GET_BYTE_TEST(lp);
1812 DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val);
1813 if (val != 0x87654321) {
1814 printk(KERN_ERR "Invalid chip endian 0x%08x\n",val);
1820 * check if the revision register is something that I
1821 * recognize. These might need to be added to later,
1822 * as future revisions could be added.
1824 chip_id = SMC_GET_PN(lp);
1825 DBG(SMC_DEBUG_MISC, "%s: id probe returned 0x%04x\n", CARDNAME, chip_id);
1826 for(i=0;chip_ids[i].id != 0; i++) {
1827 if (chip_ids[i].id == chip_id) break;
1829 if (!chip_ids[i].id) {
1830 printk(KERN_ERR "Unknown chip ID %04x\n", chip_id);
1834 version_string = chip_ids[i].name;
1836 revision = SMC_GET_REV(lp);
1837 DBG(SMC_DEBUG_MISC, "%s: revision = 0x%04x\n", CARDNAME, revision);
1839 /* At this point I'll assume that the chip is an SMC911x. */
1840 DBG(SMC_DEBUG_MISC, "%s: Found a %s\n", CARDNAME, chip_ids[i].name);
1842 /* Validate the TX FIFO size requested */
1843 if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) {
1844 printk(KERN_ERR "Invalid TX FIFO size requested %d\n", tx_fifo_kb);
1849 /* fill in some of the fields */
1850 lp->version = chip_ids[i].id;
1851 lp->revision = revision;
1852 lp->tx_fifo_kb = tx_fifo_kb;
1853 /* Reverse calculate the RX FIFO size from the TX */
1854 lp->tx_fifo_size=(lp->tx_fifo_kb<<10) - 512;
1855 lp->rx_fifo_size= ((0x4000 - 512 - lp->tx_fifo_size) / 16) * 15;
1857 /* Set the automatic flow control values */
1858 switch(lp->tx_fifo_kb) {
1860 * AFC_HI is about ((Rx Data Fifo Size)*2/3)/64
1861 * AFC_LO is AFC_HI/2
1862 * BACK_DUR is about 5uS*(AFC_LO) rounded down
1864 case 2:/* 13440 Rx Data Fifo Size */
1865 lp->afc_cfg=0x008C46AF;break;
1866 case 3:/* 12480 Rx Data Fifo Size */
1867 lp->afc_cfg=0x0082419F;break;
1868 case 4:/* 11520 Rx Data Fifo Size */
1869 lp->afc_cfg=0x00783C9F;break;
1870 case 5:/* 10560 Rx Data Fifo Size */
1871 lp->afc_cfg=0x006E374F;break;
1872 case 6:/* 9600 Rx Data Fifo Size */
1873 lp->afc_cfg=0x0064328F;break;
1874 case 7:/* 8640 Rx Data Fifo Size */
1875 lp->afc_cfg=0x005A2D7F;break;
1876 case 8:/* 7680 Rx Data Fifo Size */
1877 lp->afc_cfg=0x0050287F;break;
1878 case 9:/* 6720 Rx Data Fifo Size */
1879 lp->afc_cfg=0x0046236F;break;
1880 case 10:/* 5760 Rx Data Fifo Size */
1881 lp->afc_cfg=0x003C1E6F;break;
1882 case 11:/* 4800 Rx Data Fifo Size */
1883 lp->afc_cfg=0x0032195F;break;
1885 * AFC_HI is ~1520 bytes less than RX Data Fifo Size
1886 * AFC_LO is AFC_HI/2
1887 * BACK_DUR is about 5uS*(AFC_LO) rounded down
1889 case 12:/* 3840 Rx Data Fifo Size */
1890 lp->afc_cfg=0x0024124F;break;
1891 case 13:/* 2880 Rx Data Fifo Size */
1892 lp->afc_cfg=0x0015073F;break;
1893 case 14:/* 1920 Rx Data Fifo Size */
1894 lp->afc_cfg=0x0006032F;break;
1896 PRINTK("%s: ERROR -- no AFC_CFG setting found",
1901 DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX,
1902 "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME,
1903 lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg);
1905 spin_lock_init(&lp->lock);
1907 /* Get the MAC address */
1908 SMC_GET_MAC_ADDR(lp, dev->dev_addr);
1910 /* now, reset the chip, and put it into a known state */
1914 * If dev->irq is 0, then the device has to be banged on to see
1917 * Specifying an IRQ is done with the assumption that the user knows
1918 * what (s)he is doing. No checking is done!!!!
1925 dev->irq = smc911x_findirq(dev);
1928 /* kick the card and try again */
1932 if (dev->irq == 0) {
1933 printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
1938 dev->irq = irq_canonicalize(dev->irq);
1940 /* Fill in the fields of the device structure with ethernet values. */
1943 dev->open = smc911x_open;
1944 dev->stop = smc911x_close;
1945 dev->hard_start_xmit = smc911x_hard_start_xmit;
1946 dev->tx_timeout = smc911x_timeout;
1947 dev->watchdog_timeo = msecs_to_jiffies(watchdog);
1948 dev->set_multicast_list = smc911x_set_multicast_list;
1949 dev->ethtool_ops = &smc911x_ethtool_ops;
1950 #ifdef CONFIG_NET_POLL_CONTROLLER
1951 dev->poll_controller = smc911x_poll_controller;
1954 INIT_WORK(&lp->phy_configure, smc911x_phy_configure);
1955 lp->mii.phy_id_mask = 0x1f;
1956 lp->mii.reg_num_mask = 0x1f;
1957 lp->mii.force_media = 0;
1958 lp->mii.full_duplex = 0;
1960 lp->mii.mdio_read = smc911x_phy_read;
1961 lp->mii.mdio_write = smc911x_phy_write;
1964 * Locate the phy, if any.
1966 smc911x_phy_detect(dev);
1968 /* Set default parameters */
1969 lp->msg_enable = NETIF_MSG_LINK;
1970 lp->ctl_rfduplx = 1;
1971 lp->ctl_rspeed = 100;
1973 #ifdef SMC_DYNAMIC_BUS_CONFIG
1974 irq_flags = lp->cfg.irq_flags;
1976 irq_flags = IRQF_SHARED | SMC_IRQ_SENSE;
1980 retval = request_irq(dev->irq, &smc911x_interrupt,
1981 irq_flags, dev->name, dev);
1986 lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq);
1987 lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq);
1988 lp->rxdma_active = 0;
1989 lp->txdma_active = 0;
1990 dev->dma = lp->rxdma;
1993 retval = register_netdev(dev);
1995 /* now, print out the card info, in a short format.. */
1996 printk("%s: %s (rev %d) at %#lx IRQ %d",
1997 dev->name, version_string, lp->revision,
1998 dev->base_addr, dev->irq);
2001 if (lp->rxdma != -1)
2002 printk(" RXDMA %d ", lp->rxdma);
2004 if (lp->txdma != -1)
2005 printk("TXDMA %d", lp->txdma);
2008 if (!is_valid_ether_addr(dev->dev_addr)) {
2009 printk("%s: Invalid ethernet MAC address. Please "
2010 "set using ifconfig\n", dev->name);
2012 /* Print the Ethernet address */
2013 printk("%s: Ethernet addr: ", dev->name);
2014 for (i = 0; i < 5; i++)
2015 printk("%2.2x:", dev->dev_addr[i]);
2016 printk("%2.2x\n", dev->dev_addr[5]);
2019 if (lp->phy_type == 0) {
2020 PRINTK("%s: No PHY found\n", dev->name);
2021 } else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) {
2022 PRINTK("%s: LAN911x Internal PHY\n", dev->name);
2024 PRINTK("%s: External PHY 0x%08x\n", dev->name, lp->phy_type);
2031 if (lp->rxdma != -1) {
2032 SMC_DMA_FREE(dev, lp->rxdma);
2034 if (lp->txdma != -1) {
2035 SMC_DMA_FREE(dev, lp->txdma);
2043 * smc911x_init(void)
2046 * 0 --> there is a device
2047 * anything else, error
2049 static int __devinit smc911x_drv_probe(struct platform_device *pdev)
2051 struct net_device *ndev;
2052 struct resource *res;
2053 struct smc911x_local *lp;
2057 DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
2058 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2065 * Request the regions.
2067 if (!request_mem_region(res->start, SMC911X_IO_EXTENT, CARDNAME)) {
2072 ndev = alloc_etherdev(sizeof(struct smc911x_local));
2074 printk("%s: could not allocate device.\n", CARDNAME);
2078 SET_NETDEV_DEV(ndev, &pdev->dev);
2080 ndev->dma = (unsigned char)-1;
2081 ndev->irq = platform_get_irq(pdev, 0);
2082 lp = netdev_priv(ndev);
2084 #ifdef SMC_DYNAMIC_BUS_CONFIG
2086 struct smc911x_platdata *pd = pdev->dev.platform_data;
2091 memcpy(&lp->cfg, pd, sizeof(lp->cfg));
2095 addr = ioremap(res->start, SMC911X_IO_EXTENT);
2101 platform_set_drvdata(pdev, ndev);
2103 ndev->base_addr = res->start;
2104 ret = smc911x_probe(ndev);
2106 platform_set_drvdata(pdev, NULL);
2111 release_mem_region(res->start, SMC911X_IO_EXTENT);
2113 printk("%s: not found (%d).\n", CARDNAME, ret);
2117 lp->physaddr = res->start;
2118 lp->dev = &pdev->dev;
2125 static int __devexit smc911x_drv_remove(struct platform_device *pdev)
2127 struct net_device *ndev = platform_get_drvdata(pdev);
2128 struct smc911x_local *lp = netdev_priv(ndev);
2129 struct resource *res;
2131 DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
2132 platform_set_drvdata(pdev, NULL);
2134 unregister_netdev(ndev);
2136 free_irq(ndev->irq, ndev);
2140 if (lp->rxdma != -1) {
2141 SMC_DMA_FREE(dev, lp->rxdma);
2143 if (lp->txdma != -1) {
2144 SMC_DMA_FREE(dev, lp->txdma);
2149 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2150 release_mem_region(res->start, SMC911X_IO_EXTENT);
2156 static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state)
2158 struct net_device *ndev = platform_get_drvdata(dev);
2159 struct smc911x_local *lp = netdev_priv(ndev);
2161 DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
2163 if (netif_running(ndev)) {
2164 netif_device_detach(ndev);
2165 smc911x_shutdown(ndev);
2167 /* Set D2 - Energy detect only setting */
2168 SMC_SET_PMT_CTRL(lp, 2<<12);
2175 static int smc911x_drv_resume(struct platform_device *dev)
2177 struct net_device *ndev = platform_get_drvdata(dev);
2179 DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
2181 struct smc911x_local *lp = netdev_priv(ndev);
2183 if (netif_running(ndev)) {
2184 smc911x_reset(ndev);
2185 if (lp->phy_type != 0)
2186 smc911x_phy_configure(&lp->phy_configure);
2187 smc911x_enable(ndev);
2188 netif_device_attach(ndev);
2194 static struct platform_driver smc911x_driver = {
2195 .probe = smc911x_drv_probe,
2196 .remove = __devexit_p(smc911x_drv_remove),
2197 .suspend = smc911x_drv_suspend,
2198 .resume = smc911x_drv_resume,
2201 .owner = THIS_MODULE,
2205 static int __init smc911x_init(void)
2207 return platform_driver_register(&smc911x_driver);
2210 static void __exit smc911x_cleanup(void)
2212 platform_driver_unregister(&smc911x_driver);
2215 module_init(smc911x_init);
2216 module_exit(smc911x_cleanup);