git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/platforms/powermac/feature.c

   1 /*
   2  *  Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
   3  *                          Ben. Herrenschmidt (benh@kernel.crashing.org)
   4  *
   5  *  This program is free software; you can redistribute it and/or
   6  *  modify it under the terms of the GNU General Public License
   7  *  as published by the Free Software Foundation; either version
   8  *  2 of the License, or (at your option) any later version.
   9  *
  10  *  TODO:
  11  *
  12  *   - Replace mdelay with some schedule loop if possible
  13  *   - Shorten some obfuscated delays on some routines (like modem
  14  *     power)
  15  *   - Refcount some clocks (see darwin)
  16  *   - Split split split...
  17  *
  18  */
  19 #include <linux/types.h>
  20 #include <linux/init.h>
  21 #include <linux/delay.h>
  22 #include <linux/kernel.h>
  23 #include <linux/sched.h>
  24 #include <linux/spinlock.h>
  25 #include <linux/adb.h>
  26 #include <linux/pmu.h>
  27 #include <linux/ioport.h>
  28 #include <linux/pci.h>
  29 #include <asm/sections.h>
  30 #include <asm/errno.h>
  31 #include <asm/ohare.h>
  32 #include <asm/heathrow.h>
  33 #include <asm/keylargo.h>
  34 #include <asm/uninorth.h>
  35 #include <asm/io.h>
  36 #include <asm/prom.h>
  37 #include <asm/machdep.h>
  38 #include <asm/pmac_feature.h>
  39 #include <asm/dbdma.h>
  40 #include <asm/pci-bridge.h>
  41 #include <asm/pmac_low_i2c.h>
  42
  43 #undef DEBUG_FEATURE
  44
  45 #ifdef DEBUG_FEATURE
  46 #define DBG(fmt...) printk(KERN_DEBUG fmt)
  47 #else
  48 #define DBG(fmt...)
  49 #endif
  50
  51 #ifdef CONFIG_6xx
  52 extern int powersave_lowspeed;
  53 #endif
  54
  55 extern int powersave_nap;
  56 extern struct device_node *k2_skiplist[2];
  57
  58 /*
  59  * We use a single global lock to protect accesses. Each driver has
  60  * to take care of its own locking
  61  */
  62 DEFINE_SPINLOCK(feature_lock);
  63
  64 #define LOCK(flags)     spin_lock_irqsave(&feature_lock, flags);
  65 #define UNLOCK(flags)   spin_unlock_irqrestore(&feature_lock, flags);
  66
  67
  68 /*
  69  * Instance of some macio stuffs
  70  */
  71 struct macio_chip macio_chips[MAX_MACIO_CHIPS];
  72
  73 struct macio_chip *macio_find(struct device_node *child, int type)
  74 {
  75         while(child) {
  76                 int     i;
  77
  78                 for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
  79                         if (child == macio_chips[i].of_node &&
  80                             (!type || macio_chips[i].type == type))
  81                                 return &macio_chips[i];
  82                 child = child->parent;
  83         }
  84         return NULL;
  85 }
  86 EXPORT_SYMBOL_GPL(macio_find);
  87
  88 static const char *macio_names[] =
  89 {
  90         "Unknown",
  91         "Grand Central",
  92         "OHare",
  93         "OHareII",
  94         "Heathrow",
  95         "Gatwick",
  96         "Paddington",
  97         "Keylargo",
  98         "Pangea",
  99         "Intrepid",
 100         "K2",
 101         "Shasta",
 102 };
 103
 104
 105 struct device_node *uninorth_node;
 106 u32 __iomem *uninorth_base;
 107
 108 static u32 uninorth_rev;
 109 static int uninorth_maj;
 110 static void __iomem *u3_ht_base;
 111
 112 /*
 113  * For each motherboard family, we have a table of functions pointers
 114  * that handle the various features.
 115  */
 116
 117 typedef long (*feature_call)(struct device_node *node, long param, long value);
 118
 119 struct feature_table_entry {
 120         unsigned int    selector;
 121         feature_call    function;
 122 };
 123
 124 struct pmac_mb_def
 125 {
 126         const char*                     model_string;
 127         const char*                     model_name;
 128         int                             model_id;
 129         struct feature_table_entry*     features;
 130         unsigned long                   board_flags;
 131 };
 132 static struct pmac_mb_def pmac_mb;
 133
 134 /*
 135  * Here are the chip specific feature functions
 136  */
 137
 138 static inline int simple_feature_tweak(struct device_node *node, int type,
 139                                        int reg, u32 mask, int value)
 140 {
 141         struct macio_chip*      macio;
 142         unsigned long           flags;
 143
 144         macio = macio_find(node, type);
 145         if (!macio)
 146                 return -ENODEV;
 147         LOCK(flags);
 148         if (value)
 149                 MACIO_BIS(reg, mask);
 150         else
 151                 MACIO_BIC(reg, mask);
 152         (void)MACIO_IN32(reg);
 153         UNLOCK(flags);
 154
 155         return 0;
 156 }
 157
 158 #ifndef CONFIG_POWER4
 159
 160 static long ohare_htw_scc_enable(struct device_node *node, long param,
 161                                  long value)
 162 {
 163         struct macio_chip*      macio;
 164         unsigned long           chan_mask;
 165         unsigned long           fcr;
 166         unsigned long           flags;
 167         int                     htw, trans;
 168         unsigned long           rmask;
 169
 170         macio = macio_find(node, 0);
 171         if (!macio)
 172                 return -ENODEV;
 173         if (!strcmp(node->name, "ch-a"))
 174                 chan_mask = MACIO_FLAG_SCCA_ON;
 175         else if (!strcmp(node->name, "ch-b"))
 176                 chan_mask = MACIO_FLAG_SCCB_ON;
 177         else
 178                 return -ENODEV;
 179
 180         htw = (macio->type == macio_heathrow || macio->type == macio_paddington
 181                 || macio->type == macio_gatwick);
 182         /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
 183         trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
 184                  pmac_mb.model_id != PMAC_TYPE_YIKES);
 185         if (value) {
 186 #ifdef CONFIG_ADB_PMU
 187                 if ((param & 0xfff) == PMAC_SCC_IRDA)
 188                         pmu_enable_irled(1);
 189 #endif /* CONFIG_ADB_PMU */
 190                 LOCK(flags);
 191                 fcr = MACIO_IN32(OHARE_FCR);
 192                 /* Check if scc cell need enabling */
 193                 if (!(fcr & OH_SCC_ENABLE)) {
 194                         fcr |= OH_SCC_ENABLE;
 195                         if (htw) {
 196                                 /* Side effect: this will also power up the
 197                                  * modem, but it's too messy to figure out on which
 198                                  * ports this controls the tranceiver and on which
 199                                  * it controls the modem
 200                                  */
 201                                 if (trans)
 202                                         fcr &= ~HRW_SCC_TRANS_EN_N;
 203                                 MACIO_OUT32(OHARE_FCR, fcr);
 204                                 fcr |= (rmask = HRW_RESET_SCC);
 205                                 MACIO_OUT32(OHARE_FCR, fcr);
 206                         } else {
 207                                 fcr |= (rmask = OH_SCC_RESET);
 208                                 MACIO_OUT32(OHARE_FCR, fcr);
 209                         }
 210                         UNLOCK(flags);
 211                         (void)MACIO_IN32(OHARE_FCR);
 212                         mdelay(15);
 213                         LOCK(flags);
 214                         fcr &= ~rmask;
 215                         MACIO_OUT32(OHARE_FCR, fcr);
 216                 }
 217                 if (chan_mask & MACIO_FLAG_SCCA_ON)
 218                         fcr |= OH_SCCA_IO;
 219                 if (chan_mask & MACIO_FLAG_SCCB_ON)
 220                         fcr |= OH_SCCB_IO;
 221                 MACIO_OUT32(OHARE_FCR, fcr);
 222                 macio->flags |= chan_mask;
 223                 UNLOCK(flags);
 224                 if (param & PMAC_SCC_FLAG_XMON)
 225                         macio->flags |= MACIO_FLAG_SCC_LOCKED;
 226         } else {
 227                 if (macio->flags & MACIO_FLAG_SCC_LOCKED)
 228                         return -EPERM;
 229                 LOCK(flags);
 230                 fcr = MACIO_IN32(OHARE_FCR);
 231                 if (chan_mask & MACIO_FLAG_SCCA_ON)
 232                         fcr &= ~OH_SCCA_IO;
 233                 if (chan_mask & MACIO_FLAG_SCCB_ON)
 234                         fcr &= ~OH_SCCB_IO;
 235                 MACIO_OUT32(OHARE_FCR, fcr);
 236                 if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
 237                         fcr &= ~OH_SCC_ENABLE;
 238                         if (htw && trans)
 239                                 fcr |= HRW_SCC_TRANS_EN_N;
 240                         MACIO_OUT32(OHARE_FCR, fcr);
 241                 }
 242                 macio->flags &= ~(chan_mask);
 243                 UNLOCK(flags);
 244                 mdelay(10);
 245 #ifdef CONFIG_ADB_PMU
 246                 if ((param & 0xfff) == PMAC_SCC_IRDA)
 247                         pmu_enable_irled(0);
 248 #endif /* CONFIG_ADB_PMU */
 249         }
 250         return 0;
 251 }
 252
 253 static long ohare_floppy_enable(struct device_node *node, long param,
 254                                 long value)
 255 {
 256         return simple_feature_tweak(node, macio_ohare,
 257                 OHARE_FCR, OH_FLOPPY_ENABLE, value);
 258 }
 259
 260 static long ohare_mesh_enable(struct device_node *node, long param, long value)
 261 {
 262         return simple_feature_tweak(node, macio_ohare,
 263                 OHARE_FCR, OH_MESH_ENABLE, value);
 264 }
 265
 266 static long ohare_ide_enable(struct device_node *node, long param, long value)
 267 {
 268         switch(param) {
 269         case 0:
 270                 /* For some reason, setting the bit in set_initial_features()
 271                  * doesn't stick. I'm still investigating... --BenH.
 272                  */
 273                 if (value)
 274                         simple_feature_tweak(node, macio_ohare,
 275                                 OHARE_FCR, OH_IOBUS_ENABLE, 1);
 276                 return simple_feature_tweak(node, macio_ohare,
 277                         OHARE_FCR, OH_IDE0_ENABLE, value);
 278         case 1:
 279                 return simple_feature_tweak(node, macio_ohare,
 280                         OHARE_FCR, OH_BAY_IDE_ENABLE, value);
 281         default:
 282                 return -ENODEV;
 283         }
 284 }
 285
 286 static long ohare_ide_reset(struct device_node *node, long param, long value)
 287 {
 288         switch(param) {
 289         case 0:
 290                 return simple_feature_tweak(node, macio_ohare,
 291                         OHARE_FCR, OH_IDE0_RESET_N, !value);
 292         case 1:
 293                 return simple_feature_tweak(node, macio_ohare,
 294                         OHARE_FCR, OH_IDE1_RESET_N, !value);
 295         default:
 296                 return -ENODEV;
 297         }
 298 }
 299
 300 static long ohare_sleep_state(struct device_node *node, long param, long value)
 301 {
 302         struct macio_chip*      macio = &macio_chips[0];
 303
 304         if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
 305                 return -EPERM;
 306         if (value == 1) {
 307                 MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
 308         } else if (value == 0) {
 309                 MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
 310         }
 311
 312         return 0;
 313 }
 314
 315 static long heathrow_modem_enable(struct device_node *node, long param,
 316                                   long value)
 317 {
 318         struct macio_chip*      macio;
 319         u8                      gpio;
 320         unsigned long           flags;
 321
 322         macio = macio_find(node, macio_unknown);
 323         if (!macio)
 324                 return -ENODEV;
 325         gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
 326         if (!value) {
 327                 LOCK(flags);
 328                 MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
 329                 UNLOCK(flags);
 330                 (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
 331                 mdelay(250);
 332         }
 333         if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
 334             pmac_mb.model_id != PMAC_TYPE_YIKES) {
 335                 LOCK(flags);
 336                 if (value)
 337                         MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
 338                 else
 339                         MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
 340                 UNLOCK(flags);
 341                 (void)MACIO_IN32(HEATHROW_FCR);
 342                 mdelay(250);
 343         }
 344         if (value) {
 345                 LOCK(flags);
 346                 MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
 347                 (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
 348                 UNLOCK(flags); mdelay(250); LOCK(flags);
 349                 MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
 350                 (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
 351                 UNLOCK(flags); mdelay(250); LOCK(flags);
 352                 MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
 353                 (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
 354                 UNLOCK(flags); mdelay(250);
 355         }
 356         return 0;
 357 }
 358
 359 static long heathrow_floppy_enable(struct device_node *node, long param,
 360                                    long value)
 361 {
 362         return simple_feature_tweak(node, macio_unknown,
 363                 HEATHROW_FCR,
 364                 HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
 365                 value);
 366 }
 367
 368 static long heathrow_mesh_enable(struct device_node *node, long param,
 369                                  long value)
 370 {
 371         struct macio_chip*      macio;
 372         unsigned long           flags;
 373
 374         macio = macio_find(node, macio_unknown);
 375         if (!macio)
 376                 return -ENODEV;
 377         LOCK(flags);
 378         /* Set clear mesh cell enable */
 379         if (value)
 380                 MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
 381         else
 382                 MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
 383         (void)MACIO_IN32(HEATHROW_FCR);
 384         udelay(10);
 385         /* Set/Clear termination power */
 386         if (value)
 387                 MACIO_BIC(HEATHROW_MBCR, 0x04000000);
 388         else
 389                 MACIO_BIS(HEATHROW_MBCR, 0x04000000);
 390         (void)MACIO_IN32(HEATHROW_MBCR);
 391         udelay(10);
 392         UNLOCK(flags);
 393
 394         return 0;
 395 }
 396
 397 static long heathrow_ide_enable(struct device_node *node, long param,
 398                                 long value)
 399 {
 400         switch(param) {
 401         case 0:
 402                 return simple_feature_tweak(node, macio_unknown,
 403                         HEATHROW_FCR, HRW_IDE0_ENABLE, value);
 404         case 1:
 405                 return simple_feature_tweak(node, macio_unknown,
 406                         HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
 407         default:
 408                 return -ENODEV;
 409         }
 410 }
 411
 412 static long heathrow_ide_reset(struct device_node *node, long param,
 413                                long value)
 414 {
 415         switch(param) {
 416         case 0:
 417                 return simple_feature_tweak(node, macio_unknown,
 418                         HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
 419         case 1:
 420                 return simple_feature_tweak(node, macio_unknown,
 421                         HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
 422         default:
 423                 return -ENODEV;
 424         }
 425 }
 426
 427 static long heathrow_bmac_enable(struct device_node *node, long param,
 428                                  long value)
 429 {
 430         struct macio_chip*      macio;
 431         unsigned long           flags;
 432
 433         macio = macio_find(node, 0);
 434         if (!macio)
 435                 return -ENODEV;
 436         if (value) {
 437                 LOCK(flags);
 438                 MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
 439                 MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
 440                 UNLOCK(flags);
 441                 (void)MACIO_IN32(HEATHROW_FCR);
 442                 mdelay(10);
 443                 LOCK(flags);
 444                 MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
 445                 UNLOCK(flags);
 446                 (void)MACIO_IN32(HEATHROW_FCR);
 447                 mdelay(10);
 448         } else {
 449                 LOCK(flags);
 450                 MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
 451                 UNLOCK(flags);
 452         }
 453         return 0;
 454 }
 455
 456 static long heathrow_sound_enable(struct device_node *node, long param,
 457                                   long value)
 458 {
 459         struct macio_chip*      macio;
 460         unsigned long           flags;
 461
 462         /* B&W G3 and Yikes don't support that properly (the
 463          * sound appear to never come back after beeing shut down).
 464          */
 465         if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
 466             pmac_mb.model_id == PMAC_TYPE_YIKES)
 467                 return 0;
 468
 469         macio = macio_find(node, 0);
 470         if (!macio)
 471                 return -ENODEV;
 472         if (value) {
 473                 LOCK(flags);
 474                 MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
 475                 MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
 476                 UNLOCK(flags);
 477                 (void)MACIO_IN32(HEATHROW_FCR);
 478         } else {
 479                 LOCK(flags);
 480                 MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
 481                 MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
 482                 UNLOCK(flags);
 483         }
 484         return 0;
 485 }
 486
 487 static u32 save_fcr[6];
 488 static u32 save_mbcr;
 489 static struct dbdma_regs save_dbdma[13];
 490 static struct dbdma_regs save_alt_dbdma[13];
 491
 492 static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save)
 493 {
 494         int i;
 495
 496         /* Save state & config of DBDMA channels */
 497         for (i = 0; i < 13; i++) {
 498                 volatile struct dbdma_regs __iomem * chan = (void __iomem *)
 499                         (macio->base + ((0x8000+i*0x100)>>2));
 500                 save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
 501                 save[i].cmdptr = in_le32(&chan->cmdptr);
 502                 save[i].intr_sel = in_le32(&chan->intr_sel);
 503                 save[i].br_sel = in_le32(&chan->br_sel);
 504                 save[i].wait_sel = in_le32(&chan->wait_sel);
 505         }
 506 }
 507
 508 static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save)
 509 {
 510         int i;
 511
 512         /* Save state & config of DBDMA channels */
 513         for (i = 0; i < 13; i++) {
 514                 volatile struct dbdma_regs __iomem * chan = (void __iomem *)
 515                         (macio->base + ((0x8000+i*0x100)>>2));
 516                 out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
 517                 while (in_le32(&chan->status) & ACTIVE)
 518                         mb();
 519                 out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
 520                 out_le32(&chan->cmdptr, save[i].cmdptr);
 521                 out_le32(&chan->intr_sel, save[i].intr_sel);
 522                 out_le32(&chan->br_sel, save[i].br_sel);
 523                 out_le32(&chan->wait_sel, save[i].wait_sel);
 524         }
 525 }
 526
 527 static void heathrow_sleep(struct macio_chip *macio, int secondary)
 528 {
 529         if (secondary) {
 530                 dbdma_save(macio, save_alt_dbdma);
 531                 save_fcr[2] = MACIO_IN32(0x38);
 532                 save_fcr[3] = MACIO_IN32(0x3c);
 533         } else {
 534                 dbdma_save(macio, save_dbdma);
 535                 save_fcr[0] = MACIO_IN32(0x38);
 536                 save_fcr[1] = MACIO_IN32(0x3c);
 537                 save_mbcr = MACIO_IN32(0x34);
 538                 /* Make sure sound is shut down */
 539                 MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
 540                 MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
 541                 /* This seems to be necessary as well or the fan
 542                  * keeps coming up and battery drains fast */
 543                 MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
 544                 MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N);
 545                 /* Make sure eth is down even if module or sleep
 546                  * won't work properly */
 547                 MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
 548         }
 549         /* Make sure modem is shut down */
 550         MACIO_OUT8(HRW_GPIO_MODEM_RESET,
 551                 MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
 552         MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
 553         MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
 554
 555         /* Let things settle */
 556         (void)MACIO_IN32(HEATHROW_FCR);
 557 }
 558
 559 static void heathrow_wakeup(struct macio_chip *macio, int secondary)
 560 {
 561         if (secondary) {
 562                 MACIO_OUT32(0x38, save_fcr[2]);
 563                 (void)MACIO_IN32(0x38);
 564                 mdelay(1);
 565                 MACIO_OUT32(0x3c, save_fcr[3]);
 566                 (void)MACIO_IN32(0x38);
 567                 mdelay(10);
 568                 dbdma_restore(macio, save_alt_dbdma);
 569         } else {
 570                 MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
 571                 (void)MACIO_IN32(0x38);
 572                 mdelay(1);
 573                 MACIO_OUT32(0x3c, save_fcr[1]);
 574                 (void)MACIO_IN32(0x38);
 575                 mdelay(1);
 576                 MACIO_OUT32(0x34, save_mbcr);
 577                 (void)MACIO_IN32(0x38);
 578                 mdelay(10);
 579                 dbdma_restore(macio, save_dbdma);
 580         }
 581 }
 582
 583 static long heathrow_sleep_state(struct device_node *node, long param,
 584                                  long value)
 585 {
 586         if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
 587                 return -EPERM;
 588         if (value == 1) {
 589                 if (macio_chips[1].type == macio_gatwick)
 590                         heathrow_sleep(&macio_chips[0], 1);
 591                 heathrow_sleep(&macio_chips[0], 0);
 592         } else if (value == 0) {
 593                 heathrow_wakeup(&macio_chips[0], 0);
 594                 if (macio_chips[1].type == macio_gatwick)
 595                         heathrow_wakeup(&macio_chips[0], 1);
 596         }
 597         return 0;
 598 }
 599
 600 static long core99_scc_enable(struct device_node *node, long param, long value)
 601 {
 602         struct macio_chip*      macio;
 603         unsigned long           flags;
 604         unsigned long           chan_mask;
 605         u32                     fcr;
 606
 607         macio = macio_find(node, 0);
 608         if (!macio)
 609                 return -ENODEV;
 610         if (!strcmp(node->name, "ch-a"))
 611                 chan_mask = MACIO_FLAG_SCCA_ON;
 612         else if (!strcmp(node->name, "ch-b"))
 613                 chan_mask = MACIO_FLAG_SCCB_ON;
 614         else
 615                 return -ENODEV;
 616
 617         if (value) {
 618                 int need_reset_scc = 0;
 619                 int need_reset_irda = 0;
 620
 621                 LOCK(flags);
 622                 fcr = MACIO_IN32(KEYLARGO_FCR0);
 623                 /* Check if scc cell need enabling */
 624                 if (!(fcr & KL0_SCC_CELL_ENABLE)) {
 625                         fcr |= KL0_SCC_CELL_ENABLE;
 626                         need_reset_scc = 1;
 627                 }
 628                 if (chan_mask & MACIO_FLAG_SCCA_ON) {
 629                         fcr |= KL0_SCCA_ENABLE;
 630                         /* Don't enable line drivers for I2S modem */
 631                         if ((param & 0xfff) == PMAC_SCC_I2S1)
 632                                 fcr &= ~KL0_SCC_A_INTF_ENABLE;
 633                         else
 634                                 fcr |= KL0_SCC_A_INTF_ENABLE;
 635                 }
 636                 if (chan_mask & MACIO_FLAG_SCCB_ON) {
 637                         fcr |= KL0_SCCB_ENABLE;
 638                         /* Perform irda specific inits */
 639                         if ((param & 0xfff) == PMAC_SCC_IRDA) {
 640                                 fcr &= ~KL0_SCC_B_INTF_ENABLE;
 641                                 fcr |= KL0_IRDA_ENABLE;
 642                                 fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
 643                                 fcr |= KL0_IRDA_SOURCE1_SEL;
 644                                 fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
 645                                 fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
 646                                 need_reset_irda = 1;
 647                         } else
 648                                 fcr |= KL0_SCC_B_INTF_ENABLE;
 649                 }
 650                 MACIO_OUT32(KEYLARGO_FCR0, fcr);
 651                 macio->flags |= chan_mask;
 652                 if (need_reset_scc)  {
 653                         MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
 654                         (void)MACIO_IN32(KEYLARGO_FCR0);
 655                         UNLOCK(flags);
 656                         mdelay(15);
 657                         LOCK(flags);
 658                         MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
 659                 }
 660                 if (need_reset_irda)  {
 661                         MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
 662                         (void)MACIO_IN32(KEYLARGO_FCR0);
 663                         UNLOCK(flags);
 664                         mdelay(15);
 665                         LOCK(flags);
 666                         MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
 667                 }
 668                 UNLOCK(flags);
 669                 if (param & PMAC_SCC_FLAG_XMON)
 670                         macio->flags |= MACIO_FLAG_SCC_LOCKED;
 671         } else {
 672                 if (macio->flags & MACIO_FLAG_SCC_LOCKED)
 673                         return -EPERM;
 674                 LOCK(flags);
 675                 fcr = MACIO_IN32(KEYLARGO_FCR0);
 676                 if (chan_mask & MACIO_FLAG_SCCA_ON)
 677                         fcr &= ~KL0_SCCA_ENABLE;
 678                 if (chan_mask & MACIO_FLAG_SCCB_ON) {
 679                         fcr &= ~KL0_SCCB_ENABLE;
 680                         /* Perform irda specific clears */
 681                         if ((param & 0xfff) == PMAC_SCC_IRDA) {
 682                                 fcr &= ~KL0_IRDA_ENABLE;
 683                                 fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
 684                                 fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
 685                                 fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
 686                         }
 687                 }
 688                 MACIO_OUT32(KEYLARGO_FCR0, fcr);
 689                 if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
 690                         fcr &= ~KL0_SCC_CELL_ENABLE;
 691                         MACIO_OUT32(KEYLARGO_FCR0, fcr);
 692                 }
 693                 macio->flags &= ~(chan_mask);
 694                 UNLOCK(flags);
 695                 mdelay(10);
 696         }
 697         return 0;
 698 }
 699
 700 static long
 701 core99_modem_enable(struct device_node *node, long param, long value)
 702 {
 703         struct macio_chip*      macio;
 704         u8                      gpio;
 705         unsigned long           flags;
 706
 707         /* Hack for internal USB modem */
 708         if (node == NULL) {
 709                 if (macio_chips[0].type != macio_keylargo)
 710                         return -ENODEV;
 711                 node = macio_chips[0].of_node;
 712         }
 713         macio = macio_find(node, 0);
 714         if (!macio)
 715                 return -ENODEV;
 716         gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
 717         gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
 718         gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
 719
 720         if (!value) {
 721                 LOCK(flags);
 722                 MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
 723                 UNLOCK(flags);
 724                 (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 725                 mdelay(250);
 726         }
 727         LOCK(flags);
 728         if (value) {
 729                 MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
 730                 UNLOCK(flags);
 731                 (void)MACIO_IN32(KEYLARGO_FCR2);
 732                 mdelay(250);
 733         } else {
 734                 MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
 735                 UNLOCK(flags);
 736         }
 737         if (value) {
 738                 LOCK(flags);
 739                 MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
 740                 (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 741                 UNLOCK(flags); mdelay(250); LOCK(flags);
 742                 MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
 743                 (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 744                 UNLOCK(flags); mdelay(250); LOCK(flags);
 745                 MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
 746                 (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 747                 UNLOCK(flags); mdelay(250);
 748         }
 749         return 0;
 750 }
 751
 752 static long
 753 pangea_modem_enable(struct device_node *node, long param, long value)
 754 {
 755         struct macio_chip*      macio;
 756         u8                      gpio;
 757         unsigned long           flags;
 758
 759         /* Hack for internal USB modem */
 760         if (node == NULL) {
 761                 if (macio_chips[0].type != macio_pangea &&
 762                     macio_chips[0].type != macio_intrepid)
 763                         return -ENODEV;
 764                 node = macio_chips[0].of_node;
 765         }
 766         macio = macio_find(node, 0);
 767         if (!macio)
 768                 return -ENODEV;
 769         gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
 770         gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
 771         gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
 772
 773         if (!value) {
 774                 LOCK(flags);
 775                 MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
 776                 UNLOCK(flags);
 777                 (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 778                 mdelay(250);
 779         }
 780         LOCK(flags);
 781         if (value) {
 782                 MACIO_OUT8(KL_GPIO_MODEM_POWER,
 783                         KEYLARGO_GPIO_OUTPUT_ENABLE);
 784                 UNLOCK(flags);
 785                 (void)MACIO_IN32(KEYLARGO_FCR2);
 786                 mdelay(250);
 787         } else {
 788                 MACIO_OUT8(KL_GPIO_MODEM_POWER,
 789                         KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
 790                 UNLOCK(flags);
 791         }
 792         if (value) {
 793                 LOCK(flags);
 794                 MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
 795                 (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 796                 UNLOCK(flags); mdelay(250); LOCK(flags);
 797                 MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
 798                 (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 799                 UNLOCK(flags); mdelay(250); LOCK(flags);
 800                 MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
 801                 (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 802                 UNLOCK(flags); mdelay(250);
 803         }
 804         return 0;
 805 }
 806
 807 static long
 808 core99_ata100_enable(struct device_node *node, long value)
 809 {
 810         unsigned long flags;
 811         struct pci_dev *pdev = NULL;
 812         u8 pbus, pid;
 813         int rc;
 814
 815         if (uninorth_rev < 0x24)
 816                 return -ENODEV;
 817
 818         LOCK(flags);
 819         if (value)
 820                 UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
 821         else
 822                 UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
 823         (void)UN_IN(UNI_N_CLOCK_CNTL);
 824         UNLOCK(flags);
 825         udelay(20);
 826
 827         if (value) {
 828                 if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
 829                         pdev = pci_find_slot(pbus, pid);
 830                 if (pdev == NULL)
 831                         return 0;
 832                 rc = pci_enable_device(pdev);
 833                 if (rc)
 834                         return rc;
 835                 pci_set_master(pdev);
 836         }
 837         return 0;
 838 }
 839
 840 static long
 841 core99_ide_enable(struct device_node *node, long param, long value)
 842 {
 843         /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
 844          * based ata-100
 845          */
 846         switch(param) {
 847             case 0:
 848                 return simple_feature_tweak(node, macio_unknown,
 849                         KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
 850             case 1:
 851                 return simple_feature_tweak(node, macio_unknown,
 852                         KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
 853             case 2:
 854                 return simple_feature_tweak(node, macio_unknown,
 855                         KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
 856             case 3:
 857                 return core99_ata100_enable(node, value);
 858             default:
 859                 return -ENODEV;
 860         }
 861 }
 862
 863 static long
 864 core99_ide_reset(struct device_node *node, long param, long value)
 865 {
 866         switch(param) {
 867             case 0:
 868                 return simple_feature_tweak(node, macio_unknown,
 869                         KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
 870             case 1:
 871                 return simple_feature_tweak(node, macio_unknown,
 872                         KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
 873             case 2:
 874                 return simple_feature_tweak(node, macio_unknown,
 875                         KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
 876             default:
 877                 return -ENODEV;
 878         }
 879 }
 880
 881 static long
 882 core99_gmac_enable(struct device_node *node, long param, long value)
 883 {
 884         unsigned long flags;
 885
 886         LOCK(flags);
 887         if (value)
 888                 UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
 889         else
 890                 UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
 891         (void)UN_IN(UNI_N_CLOCK_CNTL);
 892         UNLOCK(flags);
 893         udelay(20);
 894
 895         return 0;
 896 }
 897
 898 static long
 899 core99_gmac_phy_reset(struct device_node *node, long param, long value)
 900 {
 901         unsigned long flags;
 902         struct macio_chip *macio;
 903
 904         macio = &macio_chips[0];
 905         if (macio->type != macio_keylargo && macio->type != macio_pangea &&
 906             macio->type != macio_intrepid)
 907                 return -ENODEV;
 908
 909         LOCK(flags);
 910         MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
 911         (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
 912         UNLOCK(flags);
 913         mdelay(10);
 914         LOCK(flags);
 915         MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */
 916                 KEYLARGO_GPIO_OUTOUT_DATA);
 917         UNLOCK(flags);
 918         mdelay(10);
 919
 920         return 0;
 921 }
 922
 923 static long
 924 core99_sound_chip_enable(struct device_node *node, long param, long value)
 925 {
 926         struct macio_chip*      macio;
 927         unsigned long           flags;
 928
 929         macio = macio_find(node, 0);
 930         if (!macio)
 931                 return -ENODEV;
 932
 933         /* Do a better probe code, screamer G4 desktops &
 934          * iMacs can do that too, add a recalibrate  in
 935          * the driver as well
 936          */
 937         if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
 938             pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
 939                 LOCK(flags);
 940                 if (value)
 941                         MACIO_OUT8(KL_GPIO_SOUND_POWER,
 942                                 KEYLARGO_GPIO_OUTPUT_ENABLE |
 943                                 KEYLARGO_GPIO_OUTOUT_DATA);
 944                 else
 945                         MACIO_OUT8(KL_GPIO_SOUND_POWER,
 946                                 KEYLARGO_GPIO_OUTPUT_ENABLE);
 947                 (void)MACIO_IN8(KL_GPIO_SOUND_POWER);
 948                 UNLOCK(flags);
 949         }
 950         return 0;
 951 }
 952
 953 static long
 954 core99_airport_enable(struct device_node *node, long param, long value)
 955 {
 956         struct macio_chip*      macio;
 957         unsigned long           flags;
 958         int                     state;
 959
 960         macio = macio_find(node, 0);
 961         if (!macio)
 962                 return -ENODEV;
 963
 964         /* Hint: we allow passing of macio itself for the sake of the
 965          * sleep code
 966          */
 967         if (node != macio->of_node &&
 968             (!node->parent || node->parent != macio->of_node))
 969                 return -ENODEV;
 970         state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
 971         if (value == state)
 972                 return 0;
 973         if (value) {
 974                 /* This code is a reproduction of OF enable-cardslot
 975                  * and init-wireless methods, slightly hacked until
 976                  * I got it working.
 977                  */
 978                 LOCK(flags);
 979                 MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
 980                 (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
 981                 UNLOCK(flags);
 982                 mdelay(10);
 983                 LOCK(flags);
 984                 MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
 985                 (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
 986                 UNLOCK(flags);
 987
 988                 mdelay(10);
 989
 990                 LOCK(flags);
 991                 MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
 992                 (void)MACIO_IN32(KEYLARGO_FCR2);
 993                 udelay(10);
 994                 MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
 995                 (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
 996                 udelay(10);
 997                 MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
 998                 (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
 999                 udelay(10);
1000                 MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
1001                 (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
1002                 udelay(10);
1003                 MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
1004                 (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
1005                 udelay(10);
1006                 MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
1007                 (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
1008                 UNLOCK(flags);
1009                 udelay(10);
1010                 MACIO_OUT32(0x1c000, 0);
1011                 mdelay(1);
1012                 MACIO_OUT8(0x1a3e0, 0x41);
1013                 (void)MACIO_IN8(0x1a3e0);
1014                 udelay(10);
1015                 LOCK(flags);
1016                 MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
1017                 (void)MACIO_IN32(KEYLARGO_FCR2);
1018                 UNLOCK(flags);
1019                 mdelay(100);
1020
1021                 macio->flags |= MACIO_FLAG_AIRPORT_ON;
1022         } else {
1023                 LOCK(flags);
1024                 MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
1025                 (void)MACIO_IN32(KEYLARGO_FCR2);
1026                 MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
1027                 MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
1028                 MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
1029                 MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
1030                 MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
1031                 (void)MACIO_IN8(KL_GPIO_AIRPORT_4);
1032                 UNLOCK(flags);
1033
1034                 macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
1035         }
1036         return 0;
1037 }
1038
1039 #ifdef CONFIG_SMP
1040 static long
1041 core99_reset_cpu(struct device_node *node, long param, long value)
1042 {
1043         unsigned int reset_io = 0;
1044         unsigned long flags;
1045         struct macio_chip *macio;
1046         struct device_node *np;
1047         struct device_node *cpus;
1048         const int dflt_reset_lines[] = {        KL_GPIO_RESET_CPU0,
1049                                                 KL_GPIO_RESET_CPU1,
1050                                                 KL_GPIO_RESET_CPU2,
1051                                                 KL_GPIO_RESET_CPU3 };
1052
1053         macio = &macio_chips[0];
1054         if (macio->type != macio_keylargo)
1055                 return -ENODEV;
1056
1057         cpus = of_find_node_by_path("/cpus");
1058         if (cpus == NULL)
1059                 return -ENODEV;
1060         for (np = cpus->child; np != NULL; np = np->sibling) {
1061                 const u32 *num = of_get_property(np, "reg", NULL);
1062                 const u32 *rst = of_get_property(np, "soft-reset", NULL);
1063                 if (num == NULL || rst == NULL)
1064                         continue;
1065                 if (param == *num) {
1066                         reset_io = *rst;
1067                         break;
1068                 }
1069         }
1070         of_node_put(cpus);
1071         if (np == NULL || reset_io == 0)
1072                 reset_io = dflt_reset_lines[param];
1073
1074         LOCK(flags);
1075         MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
1076         (void)MACIO_IN8(reset_io);
1077         udelay(1);
1078         MACIO_OUT8(reset_io, 0);
1079         (void)MACIO_IN8(reset_io);
1080         UNLOCK(flags);
1081
1082         return 0;
1083 }
1084 #endif /* CONFIG_SMP */
1085
1086 static long
1087 core99_usb_enable(struct device_node *node, long param, long value)
1088 {
1089         struct macio_chip *macio;
1090         unsigned long flags;
1091         const char *prop;
1092         int number;
1093         u32 reg;
1094
1095         macio = &macio_chips[0];
1096         if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1097             macio->type != macio_intrepid)
1098                 return -ENODEV;
1099
1100         prop = of_get_property(node, "AAPL,clock-id", NULL);
1101         if (!prop)
1102                 return -ENODEV;
1103         if (strncmp(prop, "usb0u048", 8) == 0)
1104                 number = 0;
1105         else if (strncmp(prop, "usb1u148", 8) == 0)
1106                 number = 2;
1107         else if (strncmp(prop, "usb2u248", 8) == 0)
1108                 number = 4;
1109         else
1110                 return -ENODEV;
1111
1112         /* Sorry for the brute-force locking, but this is only used during
1113          * sleep and the timing seem to be critical
1114          */
1115         LOCK(flags);
1116         if (value) {
1117                 /* Turn ON */
1118                 if (number == 0) {
1119                         MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
1120                         (void)MACIO_IN32(KEYLARGO_FCR0);
1121                         UNLOCK(flags);
1122                         mdelay(1);
1123                         LOCK(flags);
1124                         MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
1125                 } else if (number == 2) {
1126                         MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
1127                         UNLOCK(flags);
1128                         (void)MACIO_IN32(KEYLARGO_FCR0);
1129                         mdelay(1);
1130                         LOCK(flags);
1131                         MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
1132                 } else if (number == 4) {
1133                         MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
1134                         UNLOCK(flags);
1135                         (void)MACIO_IN32(KEYLARGO_FCR1);
1136                         mdelay(1);
1137                         LOCK(flags);
1138                         MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE);
1139                 }
1140                 if (number < 4) {
1141                         reg = MACIO_IN32(KEYLARGO_FCR4);
1142                         reg &=  ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
1143                                 KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
1144                         reg &=  ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
1145                                 KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
1146                         MACIO_OUT32(KEYLARGO_FCR4, reg);
1147                         (void)MACIO_IN32(KEYLARGO_FCR4);
1148                         udelay(10);
1149                 } else {
1150                         reg = MACIO_IN32(KEYLARGO_FCR3);
1151                         reg &=  ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
1152                                 KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0));
1153                         reg &=  ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
1154                                 KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1));
1155                         MACIO_OUT32(KEYLARGO_FCR3, reg);
1156                         (void)MACIO_IN32(KEYLARGO_FCR3);
1157                         udelay(10);
1158                 }
1159                 if (macio->type == macio_intrepid) {
1160                         /* wait for clock stopped bits to clear */
1161                         u32 test0 = 0, test1 = 0;
1162                         u32 status0, status1;
1163                         int timeout = 1000;
1164
1165                         UNLOCK(flags);
1166                         switch (number) {
1167                         case 0:
1168                                 test0 = UNI_N_CLOCK_STOPPED_USB0;
1169                                 test1 = UNI_N_CLOCK_STOPPED_USB0PCI;
1170                                 break;
1171                         case 2:
1172                                 test0 = UNI_N_CLOCK_STOPPED_USB1;
1173                                 test1 = UNI_N_CLOCK_STOPPED_USB1PCI;
1174                                 break;
1175                         case 4:
1176                                 test0 = UNI_N_CLOCK_STOPPED_USB2;
1177                                 test1 = UNI_N_CLOCK_STOPPED_USB2PCI;
1178                                 break;
1179                         }
1180                         do {
1181                                 if (--timeout <= 0) {
1182                                         printk(KERN_ERR "core99_usb_enable: "
1183                                                "Timeout waiting for clocks\n");
1184                                         break;
1185                                 }
1186                                 mdelay(1);
1187                                 status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0);
1188                                 status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1);
1189                         } while ((status0 & test0) | (status1 & test1));
1190                         LOCK(flags);
1191                 }
1192         } else {
1193                 /* Turn OFF */
1194                 if (number < 4) {
1195                         reg = MACIO_IN32(KEYLARGO_FCR4);
1196                         reg |=  KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
1197                                 KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
1198                         reg |=  KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
1199                                 KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
1200                         MACIO_OUT32(KEYLARGO_FCR4, reg);
1201                         (void)MACIO_IN32(KEYLARGO_FCR4);
1202                         udelay(1);
1203                 } else {
1204                         reg = MACIO_IN32(KEYLARGO_FCR3);
1205                         reg |=  KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
1206                                 KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0);
1207                         reg |=  KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
1208                                 KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1);
1209                         MACIO_OUT32(KEYLARGO_FCR3, reg);
1210                         (void)MACIO_IN32(KEYLARGO_FCR3);
1211                         udelay(1);
1212                 }
1213                 if (number == 0) {
1214                         if (macio->type != macio_intrepid)
1215                                 MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
1216                         (void)MACIO_IN32(KEYLARGO_FCR0);
1217                         udelay(1);
1218                         MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
1219                         (void)MACIO_IN32(KEYLARGO_FCR0);
1220                 } else if (number == 2) {
1221                         if (macio->type != macio_intrepid)
1222                                 MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
1223                         (void)MACIO_IN32(KEYLARGO_FCR0);
1224                         udelay(1);
1225                         MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
1226                         (void)MACIO_IN32(KEYLARGO_FCR0);
1227                 } else if (number == 4) {
1228                         udelay(1);
1229                         MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
1230                         (void)MACIO_IN32(KEYLARGO_FCR1);
1231                 }
1232                 udelay(1);
1233         }
1234         UNLOCK(flags);
1235
1236         return 0;
1237 }
1238
1239 static long
1240 core99_firewire_enable(struct device_node *node, long param, long value)
1241 {
1242         unsigned long flags;
1243         struct macio_chip *macio;
1244
1245         macio = &macio_chips[0];
1246         if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1247             macio->type != macio_intrepid)
1248                 return -ENODEV;
1249         if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
1250                 return -ENODEV;
1251
1252         LOCK(flags);
1253         if (value) {
1254                 UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
1255                 (void)UN_IN(UNI_N_CLOCK_CNTL);
1256         } else {
1257                 UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
1258                 (void)UN_IN(UNI_N_CLOCK_CNTL);
1259         }
1260         UNLOCK(flags);
1261         mdelay(1);
1262
1263         return 0;
1264 }
1265
1266 static long
1267 core99_firewire_cable_power(struct device_node *node, long param, long value)
1268 {
1269         unsigned long flags;
1270         struct macio_chip *macio;
1271
1272         /* Trick: we allow NULL node */
1273         if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
1274                 return -ENODEV;
1275         macio = &macio_chips[0];
1276         if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1277             macio->type != macio_intrepid)
1278                 return -ENODEV;
1279         if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
1280                 return -ENODEV;
1281
1282         LOCK(flags);
1283         if (value) {
1284                 MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
1285                 MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
1286                 udelay(10);
1287         } else {
1288                 MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
1289                 MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
1290         }
1291         UNLOCK(flags);
1292         mdelay(1);
1293
1294         return 0;
1295 }
1296
1297 static long
1298 intrepid_aack_delay_enable(struct device_node *node, long param, long value)
1299 {
1300         unsigned long flags;
1301
1302         if (uninorth_rev < 0xd2)
1303                 return -ENODEV;
1304
1305         LOCK(flags);
1306         if (param)
1307                 UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
1308         else
1309                 UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
1310         UNLOCK(flags);
1311
1312         return 0;
1313 }
1314
1315
1316 #endif /* CONFIG_POWER4 */
1317
1318 static long
1319 core99_read_gpio(struct device_node *node, long param, long value)
1320 {
1321         struct macio_chip *macio = &macio_chips[0];
1322
1323         return MACIO_IN8(param);
1324 }
1325
1326
1327 static long
1328 core99_write_gpio(struct device_node *node, long param, long value)
1329 {
1330         struct macio_chip *macio = &macio_chips[0];
1331
1332         MACIO_OUT8(param, (u8)(value & 0xff));
1333         return 0;
1334 }
1335
1336 #ifdef CONFIG_POWER4
1337 static long g5_gmac_enable(struct device_node *node, long param, long value)
1338 {
1339         struct macio_chip *macio = &macio_chips[0];
1340         unsigned long flags;
1341
1342         if (node == NULL)
1343                 return -ENODEV;
1344
1345         LOCK(flags);
1346         if (value) {
1347                 MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
1348                 mb();
1349                 k2_skiplist[0] = NULL;
1350         } else {
1351                 k2_skiplist[0] = node;
1352                 mb();
1353                 MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
1354         }
1355
1356         UNLOCK(flags);
1357         mdelay(1);
1358
1359         return 0;
1360 }
1361
1362 static long g5_fw_enable(struct device_node *node, long param, long value)
1363 {
1364         struct macio_chip *macio = &macio_chips[0];
1365         unsigned long flags;
1366
1367         if (node == NULL)
1368                 return -ENODEV;
1369
1370         LOCK(flags);
1371         if (value) {
1372                 MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
1373                 mb();
1374                 k2_skiplist[1] = NULL;
1375         } else {
1376                 k2_skiplist[1] = node;
1377                 mb();
1378                 MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
1379         }
1380
1381         UNLOCK(flags);
1382         mdelay(1);
1383
1384         return 0;
1385 }
1386
1387 static long g5_mpic_enable(struct device_node *node, long param, long value)
1388 {
1389         unsigned long flags;
1390         struct device_node *parent = of_get_parent(node);
1391         int is_u3;
1392
1393         if (parent == NULL)
1394                 return 0;
1395         is_u3 = strcmp(parent->name, "u3") == 0 ||
1396                 strcmp(parent->name, "u4") == 0;
1397         of_node_put(parent);
1398         if (!is_u3)
1399                 return 0;
1400
1401         LOCK(flags);
1402         UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
1403         UNLOCK(flags);
1404
1405         return 0;
1406 }
1407
1408 static long g5_eth_phy_reset(struct device_node *node, long param, long value)
1409 {
1410         struct macio_chip *macio = &macio_chips[0];
1411         struct device_node *phy;
1412         int need_reset;
1413
1414         /*
1415          * We must not reset the combo PHYs, only the BCM5221 found in
1416          * the iMac G5.
1417          */
1418         phy = of_get_next_child(node, NULL);
1419         if (!phy)
1420                 return -ENODEV;
1421         need_reset = device_is_compatible(phy, "B5221");
1422         of_node_put(phy);
1423         if (!need_reset)
1424                 return 0;
1425
1426         /* PHY reset is GPIO 29, not in device-tree unfortunately */
1427         MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
1428                    KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
1429         /* Thankfully, this is now always called at a time when we can
1430          * schedule by sungem.
1431          */
1432         msleep(10);
1433         MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
1434
1435         return 0;
1436 }
1437
1438 static long g5_i2s_enable(struct device_node *node, long param, long value)
1439 {
1440         /* Very crude implementation for now */
1441         struct macio_chip *macio = &macio_chips[0];
1442         unsigned long flags;
1443         int cell;
1444         u32 fcrs[3][3] = {
1445                 { 0,
1446                   K2_FCR1_I2S0_CELL_ENABLE |
1447                   K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE,
1448                   KL3_I2S0_CLK18_ENABLE
1449                 },
1450                 { KL0_SCC_A_INTF_ENABLE,
1451                   K2_FCR1_I2S1_CELL_ENABLE |
1452                   K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE,
1453                   KL3_I2S1_CLK18_ENABLE
1454                 },
1455                 { KL0_SCC_B_INTF_ENABLE,
1456                   SH_FCR1_I2S2_CELL_ENABLE |
1457                   SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE,
1458                   SH_FCR3_I2S2_CLK18_ENABLE
1459                 },
1460         };
1461
1462         if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
1463                 return -ENODEV;
1464         if (strncmp(node->name, "i2s-", 4))
1465                 return -ENODEV;
1466         cell = node->name[4] - 'a';
1467         switch(cell) {
1468         case 0:
1469         case 1:
1470                 break;
1471         case 2:
1472                 if (macio->type == macio_shasta)
1473                         break;
1474         default:
1475                 return -ENODEV;
1476         }
1477
1478         LOCK(flags);
1479         if (value) {
1480                 MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]);
1481                 MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]);
1482                 MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]);
1483         } else {
1484                 MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]);
1485                 MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]);
1486                 MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]);
1487         }
1488         udelay(10);
1489         UNLOCK(flags);
1490
1491         return 0;
1492 }
1493
1494
1495 #ifdef CONFIG_SMP
1496 static long g5_reset_cpu(struct device_node *node, long param, long value)
1497 {
1498         unsigned int reset_io = 0;
1499         unsigned long flags;
1500         struct macio_chip *macio;
1501         struct device_node *np;
1502         struct device_node *cpus;
1503
1504         macio = &macio_chips[0];
1505         if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
1506                 return -ENODEV;
1507
1508         cpus = of_find_node_by_path("/cpus");
1509         if (cpus == NULL)
1510                 return -ENODEV;
1511         for (np = cpus->child; np != NULL; np = np->sibling) {
1512                 const u32 *num = of_get_property(np, "reg", NULL);
1513                 const u32 *rst = of_get_property(np, "soft-reset", NULL);
1514                 if (num == NULL || rst == NULL)
1515                         continue;
1516                 if (param == *num) {
1517                         reset_io = *rst;
1518                         break;
1519                 }
1520         }
1521         of_node_put(cpus);
1522         if (np == NULL || reset_io == 0)
1523                 return -ENODEV;
1524
1525         LOCK(flags);
1526         MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
1527         (void)MACIO_IN8(reset_io);
1528         udelay(1);
1529         MACIO_OUT8(reset_io, 0);
1530         (void)MACIO_IN8(reset_io);
1531         UNLOCK(flags);
1532
1533         return 0;
1534 }
1535 #endif /* CONFIG_SMP */
1536
1537 /*
1538  * This can be called from pmac_smp so isn't static
1539  *
1540  * This takes the second CPU off the bus on dual CPU machines
1541  * running UP
1542  */
1543 void g5_phy_disable_cpu1(void)
1544 {
1545         if (uninorth_maj == 3)
1546                 UN_OUT(U3_API_PHY_CONFIG_1, 0);
1547 }
1548 #endif /* CONFIG_POWER4 */
1549
1550 #ifndef CONFIG_POWER4
1551
1552
1553 #ifdef CONFIG_PM
1554 static u32 save_gpio_levels[2];
1555 static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT];
1556 static u8 save_gpio_normal[KEYLARGO_GPIO_CNT];
1557 static u32 save_unin_clock_ctl;
1558
1559 static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
1560 {
1561         u32 temp;
1562
1563         if (sleep_mode) {
1564                 mdelay(1);
1565                 MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
1566                 (void)MACIO_IN32(KEYLARGO_FCR0);
1567                 mdelay(1);
1568         }
1569
1570         MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
1571                                 KL0_SCC_CELL_ENABLE |
1572                                 KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
1573                                 KL0_IRDA_CLK19_ENABLE);
1574
1575         MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
1576         MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE);
1577
1578         MACIO_BIC(KEYLARGO_FCR1,
1579                 KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
1580                 KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
1581                 KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
1582                 KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
1583                 KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
1584                 KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
1585                 KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
1586                 KL1_UIDE_ENABLE);
1587
1588         MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
1589         MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
1590
1591         temp = MACIO_IN32(KEYLARGO_FCR3);
1592         if (macio->rev >= 2) {
1593                 temp |= KL3_SHUTDOWN_PLL2X;
1594                 if (sleep_mode)
1595                         temp |= KL3_SHUTDOWN_PLL_TOTAL;
1596         }
1597
1598         temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
1599                 KL3_SHUTDOWN_PLLKW35;
1600         if (sleep_mode)
1601                 temp |= KL3_SHUTDOWN_PLLKW12;
1602         temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
1603                 | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
1604         if (sleep_mode)
1605                 temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
1606         MACIO_OUT32(KEYLARGO_FCR3, temp);
1607
1608         /* Flush posted writes & wait a bit */
1609         (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
1610 }
1611
1612 static void pangea_shutdown(struct macio_chip *macio, int sleep_mode)
1613 {
1614         u32 temp;
1615
1616         MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
1617                                 KL0_SCC_CELL_ENABLE |
1618                                 KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
1619
1620         MACIO_BIC(KEYLARGO_FCR1,
1621                 KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
1622                 KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
1623                 KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
1624                 KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
1625                 KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
1626                 KL1_UIDE_ENABLE);
1627         if (pmac_mb.board_flags & PMAC_MB_MOBILE)
1628                 MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
1629
1630         MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
1631
1632         temp = MACIO_IN32(KEYLARGO_FCR3);
1633         temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
1634                 KL3_SHUTDOWN_PLLKW35;
1635         temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE
1636                 | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE);
1637         if (sleep_mode)
1638                 temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE);
1639         MACIO_OUT32(KEYLARGO_FCR3, temp);
1640
1641         /* Flush posted writes & wait a bit */
1642         (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
1643 }
1644
1645 static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
1646 {
1647         u32 temp;
1648
1649         MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
1650                   KL0_SCC_CELL_ENABLE);
1651
1652         MACIO_BIC(KEYLARGO_FCR1,
1653                 KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
1654                 KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
1655                 KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
1656                 KL1_EIDE0_ENABLE);
1657         if (pmac_mb.board_flags & PMAC_MB_MOBILE)
1658                 MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
1659
1660         temp = MACIO_IN32(KEYLARGO_FCR3);
1661         temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
1662                   KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
1663         if (sleep_mode)
1664                 temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE);
1665         MACIO_OUT32(KEYLARGO_FCR3, temp);
1666
1667         /* Flush posted writes & wait a bit */
1668         (void)MACIO_IN32(KEYLARGO_FCR0);
1669         mdelay(10);
1670 }
1671
1672
1673 static int
1674 core99_sleep(void)
1675 {
1676         struct macio_chip *macio;
1677         int i;
1678
1679         macio = &macio_chips[0];
1680         if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1681             macio->type != macio_intrepid)
1682                 return -ENODEV;
1683
1684         /* We power off the wireless slot in case it was not done
1685          * by the driver. We don't power it on automatically however
1686          */
1687         if (macio->flags & MACIO_FLAG_AIRPORT_ON)
1688                 core99_airport_enable(macio->of_node, 0, 0);
1689
1690         /* We power off the FW cable. Should be done by the driver... */
1691         if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
1692                 core99_firewire_enable(NULL, 0, 0);
1693                 core99_firewire_cable_power(NULL, 0, 0);
1694         }
1695
1696         /* We make sure int. modem is off (in case driver lost it) */
1697         if (macio->type == macio_keylargo)
1698                 core99_modem_enable(macio->of_node, 0, 0);
1699         else
1700                 pangea_modem_enable(macio->of_node, 0, 0);
1701
1702         /* We make sure the sound is off as well */
1703         core99_sound_chip_enable(macio->of_node, 0, 0);
1704
1705         /*
1706          * Save various bits of KeyLargo
1707          */
1708
1709         /* Save the state of the various GPIOs */
1710         save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
1711         save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
1712         for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
1713                 save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
1714         for (i=0; i<KEYLARGO_GPIO_CNT; i++)
1715                 save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
1716
1717         /* Save the FCRs */
1718         if (macio->type == macio_keylargo)
1719                 save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
1720         save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
1721         save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
1722         save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
1723         save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
1724         save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
1725         if (macio->type == macio_pangea || macio->type == macio_intrepid)
1726                 save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5);
1727
1728         /* Save state & config of DBDMA channels */
1729         dbdma_save(macio, save_dbdma);
1730
1731         /*
1732          * Turn off as much as we can
1733          */
1734         if (macio->type == macio_pangea)
1735                 pangea_shutdown(macio, 1);
1736         else if (macio->type == macio_intrepid)
1737                 intrepid_shutdown(macio, 1);
1738         else if (macio->type == macio_keylargo)
1739                 keylargo_shutdown(macio, 1);
1740
1741         /*
1742          * Put the host bridge to sleep
1743          */
1744
1745         save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
1746         /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it
1747          * enabled !
1748          */
1749         UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
1750                ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
1751         udelay(100);
1752         UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
1753         UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
1754         mdelay(10);
1755
1756         /*
1757          * FIXME: A bit of black magic with OpenPIC (don't ask me why)
1758          */
1759         if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
1760                 MACIO_BIS(0x506e0, 0x00400000);
1761                 MACIO_BIS(0x506e0, 0x80000000);
1762         }
1763         return 0;
1764 }
1765
1766 static int
1767 core99_wake_up(void)
1768 {
1769         struct macio_chip *macio;
1770         int i;
1771
1772         macio = &macio_chips[0];
1773         if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1774             macio->type != macio_intrepid)
1775                 return -ENODEV;
1776
1777         /*
1778          * Wakeup the host bridge
1779          */
1780         UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
1781         udelay(10);
1782         UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
1783         udelay(10);
1784
1785         /*
1786          * Restore KeyLargo
1787          */
1788
1789         if (macio->type == macio_keylargo) {
1790                 MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
1791                 (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
1792         }
1793         MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
1794         (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
1795         MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
1796         (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
1797         MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
1798         (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
1799         MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
1800         (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
1801         MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
1802         (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
1803         if (macio->type == macio_pangea || macio->type == macio_intrepid) {
1804                 MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]);
1805                 (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10);
1806         }
1807
1808         dbdma_restore(macio, save_dbdma);
1809
1810         MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
1811         MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
1812         for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
1813                 MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
1814         for (i=0; i<KEYLARGO_GPIO_CNT; i++)
1815                 MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
1816
1817         /* FIXME more black magic with OpenPIC ... */
1818         if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
1819                 MACIO_BIC(0x506e0, 0x00400000);
1820                 MACIO_BIC(0x506e0, 0x80000000);
1821         }
1822
1823         UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
1824         udelay(100);
1825
1826         return 0;
1827 }
1828
1829 #endif /* CONFIG_PM */
1830
1831 static long
1832 core99_sleep_state(struct device_node *node, long param, long value)
1833 {
1834         /* Param == 1 means to enter the "fake sleep" mode that is
1835          * used for CPU speed switch
1836          */
1837         if (param == 1) {
1838                 if (value == 1) {
1839                         UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
1840                         UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2);
1841                 } else {
1842                         UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
1843                         udelay(10);
1844                         UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
1845                         udelay(10);
1846                 }
1847                 return 0;
1848         }
1849         if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
1850                 return -EPERM;
1851
1852 #ifdef CONFIG_PM
1853         if (value == 1)
1854                 return core99_sleep();
1855         else if (value == 0)
1856                 return core99_wake_up();
1857
1858 #endif /* CONFIG_PM */
1859         return 0;
1860 }
1861
1862 #endif /* CONFIG_POWER4 */
1863
1864 static long
1865 generic_dev_can_wake(struct device_node *node, long param, long value)
1866 {
1867         /* Todo: eventually check we are really dealing with on-board
1868          * video device ...
1869          */
1870
1871         if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP)
1872                 pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP;
1873         return 0;
1874 }
1875
1876 static long generic_get_mb_info(struct device_node *node, long param, long value)
1877 {
1878         switch(param) {
1879                 case PMAC_MB_INFO_MODEL:
1880                         return pmac_mb.model_id;
1881                 case PMAC_MB_INFO_FLAGS:
1882                         return pmac_mb.board_flags;
1883                 case PMAC_MB_INFO_NAME:
1884                         /* hack hack hack... but should work */
1885                         *((const char **)value) = pmac_mb.model_name;
1886                         return 0;
1887         }
1888         return -EINVAL;
1889 }
1890
1891
1892 /*
1893  * Table definitions
1894  */
1895
1896 /* Used on any machine
1897  */
1898 static struct feature_table_entry any_features[] = {
1899         { PMAC_FTR_GET_MB_INFO,         generic_get_mb_info },
1900         { PMAC_FTR_DEVICE_CAN_WAKE,     generic_dev_can_wake },
1901         { 0, NULL }
1902 };
1903
1904 #ifndef CONFIG_POWER4
1905
1906 /* OHare based motherboards. Currently, we only use these on the
1907  * 2400,3400 and 3500 series powerbooks. Some older desktops seem
1908  * to have issues with turning on/off those asic cells
1909  */
1910 static struct feature_table_entry ohare_features[] = {
1911         { PMAC_FTR_SCC_ENABLE,          ohare_htw_scc_enable },
1912         { PMAC_FTR_SWIM3_ENABLE,        ohare_floppy_enable },
1913         { PMAC_FTR_MESH_ENABLE,         ohare_mesh_enable },
1914         { PMAC_FTR_IDE_ENABLE,          ohare_ide_enable},
1915         { PMAC_FTR_IDE_RESET,           ohare_ide_reset},
1916         { PMAC_FTR_SLEEP_STATE,         ohare_sleep_state },
1917         { 0, NULL }
1918 };
1919
1920 /* Heathrow desktop machines (Beige G3).
1921  * Separated as some features couldn't be properly tested
1922  * and the serial port control bits appear to confuse it.
1923  */
1924 static struct feature_table_entry heathrow_desktop_features[] = {
1925         { PMAC_FTR_SWIM3_ENABLE,        heathrow_floppy_enable },
1926         { PMAC_FTR_MESH_ENABLE,         heathrow_mesh_enable },
1927         { PMAC_FTR_IDE_ENABLE,          heathrow_ide_enable },
1928         { PMAC_FTR_IDE_RESET,           heathrow_ide_reset },
1929         { PMAC_FTR_BMAC_ENABLE,         heathrow_bmac_enable },
1930         { 0, NULL }
1931 };
1932
1933 /* Heathrow based laptop, that is the Wallstreet and mainstreet
1934  * powerbooks.
1935  */
1936 static struct feature_table_entry heathrow_laptop_features[] = {
1937         { PMAC_FTR_SCC_ENABLE,          ohare_htw_scc_enable },
1938         { PMAC_FTR_MODEM_ENABLE,        heathrow_modem_enable },
1939         { PMAC_FTR_SWIM3_ENABLE,        heathrow_floppy_enable },
1940         { PMAC_FTR_MESH_ENABLE,         heathrow_mesh_enable },
1941         { PMAC_FTR_IDE_ENABLE,          heathrow_ide_enable },
1942         { PMAC_FTR_IDE_RESET,           heathrow_ide_reset },
1943         { PMAC_FTR_BMAC_ENABLE,         heathrow_bmac_enable },
1944         { PMAC_FTR_SOUND_CHIP_ENABLE,   heathrow_sound_enable },
1945         { PMAC_FTR_SLEEP_STATE,         heathrow_sleep_state },
1946         { 0, NULL }
1947 };
1948
1949 /* Paddington based machines
1950  * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
1951  */
1952 static struct feature_table_entry paddington_features[] = {
1953         { PMAC_FTR_SCC_ENABLE,          ohare_htw_scc_enable },
1954         { PMAC_FTR_MODEM_ENABLE,        heathrow_modem_enable },
1955         { PMAC_FTR_SWIM3_ENABLE,        heathrow_floppy_enable },
1956         { PMAC_FTR_MESH_ENABLE,         heathrow_mesh_enable },
1957         { PMAC_FTR_IDE_ENABLE,          heathrow_ide_enable },
1958         { PMAC_FTR_IDE_RESET,           heathrow_ide_reset },
1959         { PMAC_FTR_BMAC_ENABLE,         heathrow_bmac_enable },
1960         { PMAC_FTR_SOUND_CHIP_ENABLE,   heathrow_sound_enable },
1961         { PMAC_FTR_SLEEP_STATE,         heathrow_sleep_state },
1962         { 0, NULL }
1963 };
1964
1965 /* Core99 & MacRISC 2 machines (all machines released since the
1966  * iBook (included), that is all AGP machines, except pangea
1967  * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
1968  * used on iBook2 & iMac "flow power".
1969  */
1970 static struct feature_table_entry core99_features[] = {
1971         { PMAC_FTR_SCC_ENABLE,          core99_scc_enable },
1972         { PMAC_FTR_MODEM_ENABLE,        core99_modem_enable },
1973         { PMAC_FTR_IDE_ENABLE,          core99_ide_enable },
1974         { PMAC_FTR_IDE_RESET,           core99_ide_reset },
1975         { PMAC_FTR_GMAC_ENABLE,         core99_gmac_enable },
1976         { PMAC_FTR_GMAC_PHY_RESET,      core99_gmac_phy_reset },
1977         { PMAC_FTR_SOUND_CHIP_ENABLE,   core99_sound_chip_enable },
1978         { PMAC_FTR_AIRPORT_ENABLE,      core99_airport_enable },
1979         { PMAC_FTR_USB_ENABLE,          core99_usb_enable },
1980         { PMAC_FTR_1394_ENABLE,         core99_firewire_enable },
1981         { PMAC_FTR_1394_CABLE_POWER,    core99_firewire_cable_power },
1982 #ifdef CONFIG_PM
1983         { PMAC_FTR_SLEEP_STATE,         core99_sleep_state },
1984 #endif
1985 #ifdef CONFIG_SMP
1986         { PMAC_FTR_RESET_CPU,           core99_reset_cpu },
1987 #endif /* CONFIG_SMP */
1988         { PMAC_FTR_READ_GPIO,           core99_read_gpio },
1989         { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
1990         { 0, NULL }
1991 };
1992
1993 /* RackMac
1994  */
1995 static struct feature_table_entry rackmac_features[] = {
1996         { PMAC_FTR_SCC_ENABLE,          core99_scc_enable },
1997         { PMAC_FTR_IDE_ENABLE,          core99_ide_enable },
1998         { PMAC_FTR_IDE_RESET,           core99_ide_reset },
1999         { PMAC_FTR_GMAC_ENABLE,         core99_gmac_enable },
2000         { PMAC_FTR_GMAC_PHY_RESET,      core99_gmac_phy_reset },
2001         { PMAC_FTR_USB_ENABLE,          core99_usb_enable },
2002         { PMAC_FTR_1394_ENABLE,         core99_firewire_enable },
2003         { PMAC_FTR_1394_CABLE_POWER,    core99_firewire_cable_power },
2004         { PMAC_FTR_SLEEP_STATE,         core99_sleep_state },
2005 #ifdef CONFIG_SMP
2006         { PMAC_FTR_RESET_CPU,           core99_reset_cpu },
2007 #endif /* CONFIG_SMP */
2008         { PMAC_FTR_READ_GPIO,           core99_read_gpio },
2009         { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
2010         { 0, NULL }
2011 };
2012
2013 /* Pangea features
2014  */
2015 static struct feature_table_entry pangea_features[] = {
2016         { PMAC_FTR_SCC_ENABLE,          core99_scc_enable },
2017         { PMAC_FTR_MODEM_ENABLE,        pangea_modem_enable },
2018         { PMAC_FTR_IDE_ENABLE,          core99_ide_enable },
2019         { PMAC_FTR_IDE_RESET,           core99_ide_reset },
2020         { PMAC_FTR_GMAC_ENABLE,         core99_gmac_enable },
2021         { PMAC_FTR_GMAC_PHY_RESET,      core99_gmac_phy_reset },
2022         { PMAC_FTR_SOUND_CHIP_ENABLE,   core99_sound_chip_enable },
2023         { PMAC_FTR_AIRPORT_ENABLE,      core99_airport_enable },
2024         { PMAC_FTR_USB_ENABLE,          core99_usb_enable },
2025         { PMAC_FTR_1394_ENABLE,         core99_firewire_enable },
2026         { PMAC_FTR_1394_CABLE_POWER,    core99_firewire_cable_power },
2027         { PMAC_FTR_SLEEP_STATE,         core99_sleep_state },
2028         { PMAC_FTR_READ_GPIO,           core99_read_gpio },
2029         { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
2030         { 0, NULL }
2031 };
2032
2033 /* Intrepid features
2034  */
2035 static struct feature_table_entry intrepid_features[] = {
2036         { PMAC_FTR_SCC_ENABLE,          core99_scc_enable },
2037         { PMAC_FTR_MODEM_ENABLE,        pangea_modem_enable },
2038         { PMAC_FTR_IDE_ENABLE,          core99_ide_enable },
2039         { PMAC_FTR_IDE_RESET,           core99_ide_reset },
2040         { PMAC_FTR_GMAC_ENABLE,         core99_gmac_enable },
2041         { PMAC_FTR_GMAC_PHY_RESET,      core99_gmac_phy_reset },
2042         { PMAC_FTR_SOUND_CHIP_ENABLE,   core99_sound_chip_enable },
2043         { PMAC_FTR_AIRPORT_ENABLE,      core99_airport_enable },
2044         { PMAC_FTR_USB_ENABLE,          core99_usb_enable },
2045         { PMAC_FTR_1394_ENABLE,         core99_firewire_enable },
2046         { PMAC_FTR_1394_CABLE_POWER,    core99_firewire_cable_power },
2047         { PMAC_FTR_SLEEP_STATE,         core99_sleep_state },
2048         { PMAC_FTR_READ_GPIO,           core99_read_gpio },
2049         { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
2050         { PMAC_FTR_AACK_DELAY_ENABLE,   intrepid_aack_delay_enable },
2051         { 0, NULL }
2052 };
2053
2054 #else /* CONFIG_POWER4 */
2055
2056 /* G5 features
2057  */
2058 static struct feature_table_entry g5_features[] = {
2059         { PMAC_FTR_GMAC_ENABLE,         g5_gmac_enable },
2060         { PMAC_FTR_1394_ENABLE,         g5_fw_enable },
2061         { PMAC_FTR_ENABLE_MPIC,         g5_mpic_enable },
2062         { PMAC_FTR_GMAC_PHY_RESET,      g5_eth_phy_reset },
2063         { PMAC_FTR_SOUND_CHIP_ENABLE,   g5_i2s_enable },
2064 #ifdef CONFIG_SMP
2065         { PMAC_FTR_RESET_CPU,           g5_reset_cpu },
2066 #endif /* CONFIG_SMP */
2067         { PMAC_FTR_READ_GPIO,           core99_read_gpio },
2068         { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
2069         { 0, NULL }
2070 };
2071
2072 #endif /* CONFIG_POWER4 */
2073
2074 static struct pmac_mb_def pmac_mb_defs[] = {
2075 #ifndef CONFIG_POWER4
2076         /*
2077          * Desktops
2078          */
2079
2080         {       "AAPL,8500",                    "PowerMac 8500/8600",
2081                 PMAC_TYPE_PSURGE,               NULL,
2082                 0
2083         },
2084         {       "AAPL,9500",                    "PowerMac 9500/9600",
2085                 PMAC_TYPE_PSURGE,               NULL,
2086                 0
2087         },
2088         {       "AAPL,7200",                    "PowerMac 7200",
2089                 PMAC_TYPE_PSURGE,               NULL,
2090                 0
2091         },
2092         {       "AAPL,7300",                    "PowerMac 7200/7300",
2093                 PMAC_TYPE_PSURGE,               NULL,
2094                 0
2095         },
2096         {       "AAPL,7500",                    "PowerMac 7500",
2097                 PMAC_TYPE_PSURGE,               NULL,
2098                 0
2099         },
2100         {       "AAPL,ShinerESB",               "Apple Network Server",
2101                 PMAC_TYPE_ANS,                  NULL,
2102                 0
2103         },
2104         {       "AAPL,e407",                    "Alchemy",
2105                 PMAC_TYPE_ALCHEMY,              NULL,
2106                 0
2107         },
2108         {       "AAPL,e411",                    "Gazelle",
2109                 PMAC_TYPE_GAZELLE,              NULL,
2110                 0
2111         },
2112         {       "AAPL,Gossamer",                "PowerMac G3 (Gossamer)",
2113                 PMAC_TYPE_GOSSAMER,             heathrow_desktop_features,
2114                 0
2115         },
2116         {       "AAPL,PowerMac G3",             "PowerMac G3 (Silk)",
2117                 PMAC_TYPE_SILK,                 heathrow_desktop_features,
2118                 0
2119         },
2120         {       "PowerMac1,1",                  "Blue&White G3",
2121                 PMAC_TYPE_YOSEMITE,             paddington_features,
2122                 0
2123         },
2124         {       "PowerMac1,2",                  "PowerMac G4 PCI Graphics",
2125                 PMAC_TYPE_YIKES,                paddington_features,
2126                 0
2127         },
2128         {       "PowerMac2,1",                  "iMac FireWire",
2129                 PMAC_TYPE_FW_IMAC,              core99_features,
2130                 PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2131         },
2132         {       "PowerMac2,2",                  "iMac FireWire",
2133                 PMAC_TYPE_FW_IMAC,              core99_features,
2134                 PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2135         },
2136         {       "PowerMac3,1",                  "PowerMac G4 AGP Graphics",
2137                 PMAC_TYPE_SAWTOOTH,             core99_features,
2138                 PMAC_MB_OLD_CORE99
2139         },
2140         {       "PowerMac3,2",                  "PowerMac G4 AGP Graphics",
2141                 PMAC_TYPE_SAWTOOTH,             core99_features,
2142                 PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2143         },
2144         {       "PowerMac3,3",                  "PowerMac G4 AGP Graphics",
2145                 PMAC_TYPE_SAWTOOTH,             core99_features,
2146                 PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2147         },
2148         {       "PowerMac3,4",                  "PowerMac G4 Silver",
2149                 PMAC_TYPE_QUICKSILVER,          core99_features,
2150                 PMAC_MB_MAY_SLEEP
2151         },
2152         {       "PowerMac3,5",                  "PowerMac G4 Silver",
2153                 PMAC_TYPE_QUICKSILVER,          core99_features,
2154                 PMAC_MB_MAY_SLEEP
2155         },
2156         {       "PowerMac3,6",                  "PowerMac G4 Windtunnel",
2157                 PMAC_TYPE_WINDTUNNEL,           core99_features,
2158                 PMAC_MB_MAY_SLEEP,
2159         },
2160         {       "PowerMac4,1",                  "iMac \"Flower Power\"",
2161                 PMAC_TYPE_PANGEA_IMAC,          pangea_features,
2162                 PMAC_MB_MAY_SLEEP
2163         },
2164         {       "PowerMac4,2",                  "Flat panel iMac",
2165                 PMAC_TYPE_FLAT_PANEL_IMAC,      pangea_features,
2166                 PMAC_MB_CAN_SLEEP
2167         },
2168         {       "PowerMac4,4",                  "eMac",
2169                 PMAC_TYPE_EMAC,                 core99_features,
2170                 PMAC_MB_MAY_SLEEP
2171         },
2172         {       "PowerMac5,1",                  "PowerMac G4 Cube",
2173                 PMAC_TYPE_CUBE,                 core99_features,
2174                 PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2175         },
2176         {       "PowerMac6,1",                  "Flat panel iMac",
2177                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2178                 PMAC_MB_MAY_SLEEP,
2179         },
2180         {       "PowerMac6,3",                  "Flat panel iMac",
2181                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2182                 PMAC_MB_MAY_SLEEP,
2183         },
2184         {       "PowerMac6,4",                  "eMac",
2185                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2186                 PMAC_MB_MAY_SLEEP,
2187         },
2188         {       "PowerMac10,1",                 "Mac mini",
2189                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2190                 PMAC_MB_MAY_SLEEP,
2191         },
2192         {       "iMac,1",                       "iMac (first generation)",
2193                 PMAC_TYPE_ORIG_IMAC,            paddington_features,
2194                 0
2195         },
2196
2197         /*
2198          * Xserve's
2199          */
2200
2201         {       "RackMac1,1",                   "XServe",
2202                 PMAC_TYPE_RACKMAC,              rackmac_features,
2203                 0,
2204         },
2205         {       "RackMac1,2",                   "XServe rev. 2",
2206                 PMAC_TYPE_RACKMAC,              rackmac_features,
2207                 0,
2208         },
2209
2210         /*
2211          * Laptops
2212          */
2213
2214         {       "AAPL,3400/2400",               "PowerBook 3400",
2215                 PMAC_TYPE_HOOPER,               ohare_features,
2216                 PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
2217         },
2218         {       "AAPL,3500",                    "PowerBook 3500",
2219                 PMAC_TYPE_KANGA,                ohare_features,
2220                 PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
2221         },
2222         {       "AAPL,PowerBook1998",           "PowerBook Wallstreet",
2223                 PMAC_TYPE_WALLSTREET,           heathrow_laptop_features,
2224                 PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
2225         },
2226         {       "PowerBook1,1",                 "PowerBook 101 (Lombard)",
2227                 PMAC_TYPE_101_PBOOK,            paddington_features,
2228                 PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
2229         },
2230         {       "PowerBook2,1",                 "iBook (first generation)",
2231                 PMAC_TYPE_ORIG_IBOOK,           core99_features,
2232                 PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
2233         },
2234         {       "PowerBook2,2",                 "iBook FireWire",
2235                 PMAC_TYPE_FW_IBOOK,             core99_features,
2236                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
2237                 PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
2238         },
2239         {       "PowerBook3,1",                 "PowerBook Pismo",
2240                 PMAC_TYPE_PISMO,                core99_features,
2241                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
2242                 PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
2243         },
2244         {       "PowerBook3,2",                 "PowerBook Titanium",
2245                 PMAC_TYPE_TITANIUM,             core99_features,
2246                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2247         },
2248         {       "PowerBook3,3",                 "PowerBook Titanium II",
2249                 PMAC_TYPE_TITANIUM2,            core99_features,
2250                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2251         },
2252         {       "PowerBook3,4",                 "PowerBook Titanium III",
2253                 PMAC_TYPE_TITANIUM3,            core99_features,
2254                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2255         },
2256         {       "PowerBook3,5",                 "PowerBook Titanium IV",
2257                 PMAC_TYPE_TITANIUM4,            core99_features,
2258                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2259         },
2260         {       "PowerBook4,1",                 "iBook 2",
2261                 PMAC_TYPE_IBOOK2,               pangea_features,
2262                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2263         },
2264         {       "PowerBook4,2",                 "iBook 2",
2265                 PMAC_TYPE_IBOOK2,               pangea_features,
2266                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2267         },
2268         {       "PowerBook4,3",                 "iBook 2 rev. 2",
2269                 PMAC_TYPE_IBOOK2,               pangea_features,
2270                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2271         },
2272         {       "PowerBook5,1",                 "PowerBook G4 17\"",
2273                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2274                 PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2275         },
2276         {       "PowerBook5,2",                 "PowerBook G4 15\"",
2277                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2278                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2279         },
2280         {       "PowerBook5,3",                 "PowerBook G4 17\"",
2281                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2282                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2283         },
2284         {       "PowerBook5,4",                 "PowerBook G4 15\"",
2285                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2286                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2287         },
2288         {       "PowerBook5,5",                 "PowerBook G4 17\"",
2289                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2290                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2291         },
2292         {       "PowerBook5,6",                 "PowerBook G4 15\"",
2293                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2294                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2295         },
2296         {       "PowerBook5,7",                 "PowerBook G4 17\"",
2297                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2298                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2299         },
2300         {       "PowerBook5,8",                 "PowerBook G4 15\"",
2301                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2302                 PMAC_MB_MAY_SLEEP  | PMAC_MB_MOBILE,
2303         },
2304         {       "PowerBook5,9",                 "PowerBook G4 17\"",
2305                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2306                 PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
2307         },
2308         {       "PowerBook6,1",                 "PowerBook G4 12\"",
2309                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2310                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2311         },
2312         {       "PowerBook6,2",                 "PowerBook G4",
2313                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2314                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2315         },
2316         {       "PowerBook6,3",                 "iBook G4",
2317                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2318                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2319         },
2320         {       "PowerBook6,4",                 "PowerBook G4 12\"",
2321                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2322                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2323         },
2324         {       "PowerBook6,5",                 "iBook G4",
2325                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2326                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2327         },
2328         {       "PowerBook6,7",                 "iBook G4",
2329                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2330                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2331         },
2332         {       "PowerBook6,8",                 "PowerBook G4 12\"",
2333                 PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2334                 PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2335         },
2336 #else /* CONFIG_POWER4 */
2337         {       "PowerMac7,2",                  "PowerMac G5",
2338                 PMAC_TYPE_POWERMAC_G5,          g5_features,
2339                 0,
2340         },
2341 #ifdef CONFIG_PPC64
2342         {       "PowerMac7,3",                  "PowerMac G5",
2343                 PMAC_TYPE_POWERMAC_G5,          g5_features,
2344                 0,
2345         },
2346         {       "PowerMac8,1",                  "iMac G5",
2347                 PMAC_TYPE_IMAC_G5,              g5_features,
2348                 0,
2349         },
2350         {       "PowerMac9,1",                  "PowerMac G5",
2351                 PMAC_TYPE_POWERMAC_G5_U3L,      g5_features,
2352                 0,
2353         },
2354         {       "PowerMac11,2",                 "PowerMac G5 Dual Core",
2355                 PMAC_TYPE_POWERMAC_G5_U3L,      g5_features,
2356                 0,
2357         },
2358         {       "PowerMac12,1",                 "iMac G5 (iSight)",
2359                 PMAC_TYPE_POWERMAC_G5_U3L,      g5_features,
2360                 0,
2361         },
2362         {       "RackMac3,1",                   "XServe G5",
2363                 PMAC_TYPE_XSERVE_G5,            g5_features,
2364                 0,
2365         },
2366 #endif /* CONFIG_PPC64 */
2367 #endif /* CONFIG_POWER4 */
2368 };
2369
2370 /*
2371  * The toplevel feature_call callback
2372  */
2373 long pmac_do_feature_call(unsigned int selector, ...)
2374 {
2375         struct device_node *node;
2376         long param, value;
2377         int i;
2378         feature_call func = NULL;
2379         va_list args;
2380
2381         if (pmac_mb.features)
2382                 for (i=0; pmac_mb.features[i].function; i++)
2383                         if (pmac_mb.features[i].selector == selector) {
2384                                 func = pmac_mb.features[i].function;
2385                                 break;
2386                         }
2387         if (!func)
2388                 for (i=0; any_features[i].function; i++)
2389                         if (any_features[i].selector == selector) {
2390                                 func = any_features[i].function;
2391                                 break;
2392                         }
2393         if (!func)
2394                 return -ENODEV;
2395
2396         va_start(args, selector);
2397         node = (struct device_node*)va_arg(args, void*);
2398         param = va_arg(args, long);
2399         value = va_arg(args, long);
2400         va_end(args);
2401
2402         return func(node, param, value);
2403 }
2404
2405 static int __init probe_motherboard(void)
2406 {
2407         int i;
2408         struct macio_chip *macio = &macio_chips[0];
2409         const char *model = NULL;
2410         struct device_node *dt;
2411         int ret = 0;
2412
2413         /* Lookup known motherboard type in device-tree. First try an
2414          * exact match on the "model" property, then try a "compatible"
2415          * match is none is found.
2416          */
2417         dt = of_find_node_by_name(NULL, "device-tree");
2418         if (dt != NULL)
2419                 model = of_get_property(dt, "model", NULL);
2420         for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
2421             if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
2422                 pmac_mb = pmac_mb_defs[i];
2423                 goto found;
2424             }
2425         }
2426         for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
2427             if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
2428                 pmac_mb = pmac_mb_defs[i];
2429                 goto found;
2430             }
2431         }
2432
2433         /* Fallback to selection depending on mac-io chip type */
2434         switch(macio->type) {
2435 #ifndef CONFIG_POWER4
2436             case macio_grand_central:
2437                 pmac_mb.model_id = PMAC_TYPE_PSURGE;
2438                 pmac_mb.model_name = "Unknown PowerSurge";
2439                 break;
2440             case macio_ohare:
2441                 pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
2442                 pmac_mb.model_name = "Unknown OHare-based";
2443                 break;
2444             case macio_heathrow:
2445                 pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
2446                 pmac_mb.model_name = "Unknown Heathrow-based";
2447                 pmac_mb.features = heathrow_desktop_features;
2448                 break;
2449             case macio_paddington:
2450                 pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
2451                 pmac_mb.model_name = "Unknown Paddington-based";
2452                 pmac_mb.features = paddington_features;
2453                 break;
2454             case macio_keylargo:
2455                 pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
2456                 pmac_mb.model_name = "Unknown Keylargo-based";
2457                 pmac_mb.features = core99_features;
2458                 break;
2459             case macio_pangea:
2460                 pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
2461                 pmac_mb.model_name = "Unknown Pangea-based";
2462                 pmac_mb.features = pangea_features;
2463                 break;
2464             case macio_intrepid:
2465                 pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID;
2466                 pmac_mb.model_name = "Unknown Intrepid-based";
2467                 pmac_mb.features = intrepid_features;
2468                 break;
2469 #else /* CONFIG_POWER4 */
2470         case macio_keylargo2:
2471                 pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
2472                 pmac_mb.model_name = "Unknown K2-based";
2473                 pmac_mb.features = g5_features;
2474                 break;
2475         case macio_shasta:
2476                 pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA;
2477                 pmac_mb.model_name = "Unknown Shasta-based";
2478                 pmac_mb.features = g5_features;
2479                 break;
2480 #endif /* CONFIG_POWER4 */
2481         default:
2482                 ret = -ENODEV;
2483                 goto done;
2484         }
2485 found:
2486 #ifndef CONFIG_POWER4
2487         /* Fixup Hooper vs. Comet */
2488         if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
2489                 u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
2490                 if (!mach_id_ptr) {
2491                         ret = -ENODEV;
2492                         goto done;
2493                 }
2494                 /* Here, I used to disable the media-bay on comet. It
2495                  * appears this is wrong, the floppy connector is actually
2496                  * a kind of media-bay and works with the current driver.
2497                  */
2498                 if (__raw_readl(mach_id_ptr) & 0x20000000UL)
2499                         pmac_mb.model_id = PMAC_TYPE_COMET;
2500                 iounmap(mach_id_ptr);
2501         }
2502
2503         /* Set default value of powersave_nap on machines that support it.
2504          * It appears that uninorth rev 3 has a problem with it, we don't
2505          * enable it on those. In theory, the flush-on-lock property is
2506          * supposed to be set when not supported, but I'm not very confident
2507          * that all Apple OF revs did it properly, I do it the paranoid way.
2508          */
2509         while (uninorth_base && uninorth_rev > 3) {
2510                 struct device_node *cpus = of_find_node_by_path("/cpus");
2511                 struct device_node *np;
2512
2513                 if (!cpus || !cpus->child) {
2514                         printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
2515                         of_node_put(cpus);
2516                         break;
2517                 }
2518                 np = cpus->child;
2519                 /* Nap mode not supported on SMP */
2520                 if (np->sibling) {
2521                         of_node_put(cpus);
2522                         break;
2523                 }
2524                 /* Nap mode not supported if flush-on-lock property is present */
2525                 if (of_get_property(np, "flush-on-lock", NULL)) {
2526                         of_node_put(cpus);
2527                         break;
2528                 }
2529                 of_node_put(cpus);
2530                 powersave_nap = 1;
2531                 printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
2532                 break;
2533         }
2534
2535         /* On CPUs that support it (750FX), lowspeed by default during
2536          * NAP mode
2537          */
2538         powersave_lowspeed = 1;
2539
2540 #else /* CONFIG_POWER4 */
2541         powersave_nap = 1;
2542 #endif  /* CONFIG_POWER4 */
2543
2544         /* Check for "mobile" machine */
2545         if (model && (strncmp(model, "PowerBook", 9) == 0
2546                    || strncmp(model, "iBook", 5) == 0))
2547                 pmac_mb.board_flags |= PMAC_MB_MOBILE;
2548
2549
2550         printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
2551 done:
2552         of_node_put(dt);
2553         return ret;
2554 }
2555
2556 /* Initialize the Core99 UniNorth host bridge and memory controller
2557  */
2558 static void __init probe_uninorth(void)
2559 {
2560         const u32 *addrp;
2561         phys_addr_t address;
2562         unsigned long actrl;
2563
2564         /* Locate core99 Uni-N */
2565         uninorth_node = of_find_node_by_name(NULL, "uni-n");
2566         /* Locate G5 u3 */
2567         if (uninorth_node == NULL) {
2568                 uninorth_node = of_find_node_by_name(NULL, "u3");
2569                 uninorth_maj = 3;
2570         }
2571         /* Locate G5 u4 */
2572         if (uninorth_node == NULL) {
2573                 uninorth_node = of_find_node_by_name(NULL, "u4");
2574                 uninorth_maj = 4;
2575         }
2576         if (uninorth_node == NULL)
2577                 return;
2578
2579         addrp = of_get_property(uninorth_node, "reg", NULL);
2580         if (addrp == NULL)
2581                 return;
2582         address = of_translate_address(uninorth_node, addrp);
2583         if (address == 0)
2584                 return;
2585         uninorth_base = ioremap(address, 0x40000);
2586         uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
2587         if (uninorth_maj == 3 || uninorth_maj == 4)
2588                 u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
2589
2590         printk(KERN_INFO "Found %s memory controller & host bridge"
2591                " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
2592                uninorth_maj == 4 ? "U4" : "UniNorth",
2593                (unsigned int)address, uninorth_rev);
2594         printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
2595
2596         /* Set the arbitrer QAck delay according to what Apple does
2597          */
2598         if (uninorth_rev < 0x11) {
2599                 actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
2600                 actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
2601                         UNI_N_ARB_CTRL_QACK_DELAY) <<
2602                         UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
2603                 UN_OUT(UNI_N_ARB_CTRL, actrl);
2604         }
2605
2606         /* Some more magic as done by them in recent MacOS X on UniNorth
2607          * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
2608          * memory timeout
2609          */
2610         if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) ||
2611             uninorth_rev == 0xc0)
2612                 UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
2613 }
2614
2615 static void __init probe_one_macio(const char *name, const char *compat, int type)
2616 {
2617         struct device_node*     node;
2618         int                     i;
2619         volatile u32 __iomem    *base;
2620         const u32               *addrp, *revp;
2621         phys_addr_t             addr;
2622         u64                     size;
2623
2624         for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
2625                 if (!compat)
2626                         break;
2627                 if (device_is_compatible(node, compat))
2628                         break;
2629         }
2630         if (!node)
2631                 return;
2632         for(i=0; i<MAX_MACIO_CHIPS; i++) {
2633                 if (!macio_chips[i].of_node)
2634                         break;
2635                 if (macio_chips[i].of_node == node)
2636                         return;
2637         }
2638
2639         if (i >= MAX_MACIO_CHIPS) {
2640                 printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
2641                 printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
2642                 return;
2643         }
2644         addrp = of_get_pci_address(node, 0, &size, NULL);
2645         if (addrp == NULL) {
2646                 printk(KERN_ERR "pmac_feature: %s: can't find base !\n",
2647                        node->full_name);
2648                 return;
2649         }
2650         addr = of_translate_address(node, addrp);
2651         if (addr == 0) {
2652                 printk(KERN_ERR "pmac_feature: %s, can't translate base !\n",
2653                        node->full_name);
2654                 return;
2655         }
2656         base = ioremap(addr, (unsigned long)size);
2657         if (!base) {
2658                 printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n",
2659                        node->full_name);
2660                 return;
2661         }
2662         if (type == macio_keylargo || type == macio_keylargo2) {
2663                 const u32 *did = of_get_property(node, "device-id", NULL);
2664                 if (*did == 0x00000025)
2665                         type = macio_pangea;
2666                 if (*did == 0x0000003e)
2667                         type = macio_intrepid;
2668                 if (*did == 0x0000004f)
2669                         type = macio_shasta;
2670         }
2671         macio_chips[i].of_node  = node;
2672         macio_chips[i].type     = type;
2673         macio_chips[i].base     = base;
2674         macio_chips[i].flags    = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
2675         macio_chips[i].name     = macio_names[type];
2676         revp = of_get_property(node, "revision-id", NULL);
2677         if (revp)
2678                 macio_chips[i].rev = *revp;
2679         printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
2680                 macio_names[type], macio_chips[i].rev, macio_chips[i].base);
2681 }
2682
2683 static int __init
2684 probe_macios(void)
2685 {
2686         /* Warning, ordering is important */
2687         probe_one_macio("gc", NULL, macio_grand_central);
2688         probe_one_macio("ohare", NULL, macio_ohare);
2689         probe_one_macio("pci106b,7", NULL, macio_ohareII);
2690         probe_one_macio("mac-io", "keylargo", macio_keylargo);
2691         probe_one_macio("mac-io", "paddington", macio_paddington);
2692         probe_one_macio("mac-io", "gatwick", macio_gatwick);
2693         probe_one_macio("mac-io", "heathrow", macio_heathrow);
2694         probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
2695
2696         /* Make sure the "main" macio chip appear first */
2697         if (macio_chips[0].type == macio_gatwick
2698             && macio_chips[1].type == macio_heathrow) {
2699                 struct macio_chip temp = macio_chips[0];
2700                 macio_chips[0] = macio_chips[1];
2701                 macio_chips[1] = temp;
2702         }
2703         if (macio_chips[0].type == macio_ohareII
2704             && macio_chips[1].type == macio_ohare) {
2705                 struct macio_chip temp = macio_chips[0];
2706                 macio_chips[0] = macio_chips[1];
2707                 macio_chips[1] = temp;
2708         }
2709         macio_chips[0].lbus.index = 0;
2710         macio_chips[1].lbus.index = 1;
2711
2712         return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
2713 }
2714
2715 static void __init
2716 initial_serial_shutdown(struct device_node *np)
2717 {
2718         int len;
2719         const struct slot_names_prop {
2720                 int     count;
2721                 char    name[1];
2722         } *slots;
2723         const char *conn;
2724         int port_type = PMAC_SCC_ASYNC;
2725         int modem = 0;
2726
2727         slots = of_get_property(np, "slot-names", &len);
2728         conn = of_get_property(np, "AAPL,connector", &len);
2729         if (conn && (strcmp(conn, "infrared") == 0))
2730                 port_type = PMAC_SCC_IRDA;
2731         else if (device_is_compatible(np, "cobalt"))
2732                 modem = 1;
2733         else if (slots && slots->count > 0) {
2734                 if (strcmp(slots->name, "IrDA") == 0)
2735                         port_type = PMAC_SCC_IRDA;
2736                 else if (strcmp(slots->name, "Modem") == 0)
2737                         modem = 1;
2738         }
2739         if (modem)
2740                 pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
2741         pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
2742 }
2743
2744 static void __init
2745 set_initial_features(void)
2746 {
2747         struct device_node *np;
2748
2749         /* That hack appears to be necessary for some StarMax motherboards
2750          * but I'm not too sure it was audited for side-effects on other
2751          * ohare based machines...
2752          * Since I still have difficulties figuring the right way to
2753          * differenciate them all and since that hack was there for a long
2754          * time, I'll keep it around
2755          */
2756         if (macio_chips[0].type == macio_ohare) {
2757                 struct macio_chip *macio = &macio_chips[0];
2758                 np = of_find_node_by_name(NULL, "via-pmu");
2759                 if (np)
2760                         MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
2761                 else
2762                         MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
2763                 of_node_put(np);
2764         } else if (macio_chips[1].type == macio_ohare) {
2765                 struct macio_chip *macio = &macio_chips[1];
2766                 MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
2767         }
2768
2769 #ifdef CONFIG_POWER4
2770         if (macio_chips[0].type == macio_keylargo2 ||
2771             macio_chips[0].type == macio_shasta) {
2772 #ifndef CONFIG_SMP
2773                 /* On SMP machines running UP, we have the second CPU eating
2774                  * bus cycles. We need to take it off the bus. This is done
2775                  * from pmac_smp for SMP kernels running on one CPU
2776                  */
2777                 np = of_find_node_by_type(NULL, "cpu");
2778                 if (np != NULL)
2779                         np = of_find_node_by_type(np, "cpu");
2780                 if (np != NULL) {
2781                         g5_phy_disable_cpu1();
2782                         of_node_put(np);
2783                 }
2784 #endif /* CONFIG_SMP */
2785                 /* Enable GMAC for now for PCI probing. It will be disabled
2786                  * later on after PCI probe
2787                  */
2788                 np = of_find_node_by_name(NULL, "ethernet");
2789                 while(np) {
2790                         if (device_is_compatible(np, "K2-GMAC"))
2791                                 g5_gmac_enable(np, 0, 1);
2792                         np = of_find_node_by_name(np, "ethernet");
2793                 }
2794
2795                 /* Enable FW before PCI probe. Will be disabled later on
2796                  * Note: We should have a batter way to check that we are
2797                  * dealing with uninorth internal cell and not a PCI cell
2798                  * on the external PCI. The code below works though.
2799                  */
2800                 np = of_find_node_by_name(NULL, "firewire");
2801                 while(np) {
2802                         if (device_is_compatible(np, "pci106b,5811")) {
2803                                 macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
2804                                 g5_fw_enable(np, 0, 1);
2805                         }
2806                         np = of_find_node_by_name(np, "firewire");
2807                 }
2808         }
2809 #else /* CONFIG_POWER4 */
2810
2811         if (macio_chips[0].type == macio_keylargo ||
2812             macio_chips[0].type == macio_pangea ||
2813             macio_chips[0].type == macio_intrepid) {
2814                 /* Enable GMAC for now for PCI probing. It will be disabled
2815                  * later on after PCI probe
2816                  */
2817                 np = of_find_node_by_name(NULL, "ethernet");
2818                 while(np) {
2819                         if (np->parent
2820                             && device_is_compatible(np->parent, "uni-north")
2821                             && device_is_compatible(np, "gmac"))
2822                                 core99_gmac_enable(np, 0, 1);
2823                         np = of_find_node_by_name(np, "ethernet");
2824                 }
2825
2826                 /* Enable FW before PCI probe. Will be disabled later on
2827                  * Note: We should have a batter way to check that we are
2828                  * dealing with uninorth internal cell and not a PCI cell
2829                  * on the external PCI. The code below works though.
2830                  */
2831                 np = of_find_node_by_name(NULL, "firewire");
2832                 while(np) {
2833                         if (np->parent
2834                             && device_is_compatible(np->parent, "uni-north")
2835                             && (device_is_compatible(np, "pci106b,18") ||
2836                                 device_is_compatible(np, "pci106b,30") ||
2837                                 device_is_compatible(np, "pci11c1,5811"))) {
2838                                 macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
2839                                 core99_firewire_enable(np, 0, 1);
2840                         }
2841                         np = of_find_node_by_name(np, "firewire");
2842                 }
2843
2844                 /* Enable ATA-100 before PCI probe. */
2845                 np = of_find_node_by_name(NULL, "ata-6");
2846                 while(np) {
2847                         if (np->parent
2848                             && device_is_compatible(np->parent, "uni-north")
2849                             && device_is_compatible(np, "kauai-ata")) {
2850                                 core99_ata100_enable(np, 1);
2851                         }
2852                         np = of_find_node_by_name(np, "ata-6");
2853                 }
2854
2855                 /* Switch airport off */
2856                 for_each_node_by_name(np, "radio") {
2857                         if (np && np->parent == macio_chips[0].of_node) {
2858                                 macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
2859                                 core99_airport_enable(np, 0, 0);
2860                         }
2861                 }
2862                 of_node_put(np);
2863         }
2864
2865         /* On all machines that support sound PM, switch sound off */
2866         if (macio_chips[0].of_node)
2867                 pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
2868                         macio_chips[0].of_node, 0, 0);
2869
2870         /* While on some desktop G3s, we turn it back on */
2871         if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
2872                 && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
2873                     pmac_mb.model_id == PMAC_TYPE_SILK)) {
2874                 struct macio_chip *macio = &macio_chips[0];
2875                 MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
2876                 MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
2877         }
2878
2879 #endif /* CONFIG_POWER4 */
2880
2881         /* On all machines, switch modem & serial ports off */
2882         for_each_node_by_name(np, "ch-a")
2883                 initial_serial_shutdown(np);
2884         of_node_put(np);
2885         for_each_node_by_name(np, "ch-b")
2886                 initial_serial_shutdown(np);
2887         of_node_put(np);
2888 }
2889
2890 void __init
2891 pmac_feature_init(void)
2892 {
2893         /* Detect the UniNorth memory controller */
2894         probe_uninorth();
2895
2896         /* Probe mac-io controllers */
2897         if (probe_macios()) {
2898                 printk(KERN_WARNING "No mac-io chip found\n");
2899                 return;
2900         }
2901
2902         /* Probe machine type */
2903         if (probe_motherboard())
2904                 printk(KERN_WARNING "Unknown PowerMac !\n");
2905
2906         /* Set some initial features (turn off some chips that will
2907          * be later turned on)
2908          */
2909         set_initial_features();
2910 }
2911
2912 #if 0
2913 static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
2914 {
2915         int     freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
2916         int     bits[8] = { 8,16,0,32,2,4,0,0 };
2917         int     freq = (frq >> 8) & 0xf;
2918
2919         if (freqs[freq] == 0)
2920                 printk("%s: Unknown HT link frequency %x\n", name, freq);
2921         else
2922                 printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
2923                        name, freqs[freq],
2924                        bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
2925 }
2926
2927 void __init pmac_check_ht_link(void)
2928 {
2929         u32     ufreq, freq, ucfg, cfg;
2930         struct device_node *pcix_node;
2931         u8      px_bus, px_devfn;
2932         struct pci_controller *px_hose;
2933
2934         (void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND);
2935         ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG);
2936         ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ);
2937         dump_HT_speeds("U3 HyperTransport", cfg, freq);
2938
2939         pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
2940         if (pcix_node == NULL) {
2941                 printk("No PCI-X bridge found\n");
2942                 return;
2943         }
2944         if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) {
2945                 printk("PCI-X bridge found but not matched to pci\n");
2946                 return;
2947         }
2948         px_hose = pci_find_hose_for_OF_device(pcix_node);
2949         if (px_hose == NULL) {
2950                 printk("PCI-X bridge found but not matched to host\n");
2951                 return;
2952         }
2953         early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
2954         early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
2955         dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
2956         early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
2957         early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
2958         dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
2959 }
2960 #endif /* 0 */
2961
2962 /*
2963  * Early video resume hook
2964  */
2965
2966 static void (*pmac_early_vresume_proc)(void *data);
2967 static void *pmac_early_vresume_data;
2968
2969 void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
2970 {
2971         if (!machine_is(powermac))
2972                 return;
2973         preempt_disable();
2974         pmac_early_vresume_proc = proc;
2975         pmac_early_vresume_data = data;
2976         preempt_enable();
2977 }
2978 EXPORT_SYMBOL(pmac_set_early_video_resume);
2979
2980 void pmac_call_early_video_resume(void)
2981 {
2982         if (pmac_early_vresume_proc)
2983                 pmac_early_vresume_proc(pmac_early_vresume_data);
2984 }
2985
2986 /*
2987  * AGP related suspend/resume code
2988  */
2989
2990 static struct pci_dev *pmac_agp_bridge;
2991 static int (*pmac_agp_suspend)(struct pci_dev *bridge);
2992 static int (*pmac_agp_resume)(struct pci_dev *bridge);
2993
2994 void pmac_register_agp_pm(struct pci_dev *bridge,
2995                                  int (*suspend)(struct pci_dev *bridge),
2996                                  int (*resume)(struct pci_dev *bridge))
2997 {
2998         if (suspend || resume) {
2999                 pmac_agp_bridge = bridge;
3000                 pmac_agp_suspend = suspend;
3001                 pmac_agp_resume = resume;
3002                 return;
3003         }
3004         if (bridge != pmac_agp_bridge)
3005                 return;
3006         pmac_agp_suspend = pmac_agp_resume = NULL;
3007         return;
3008 }
3009 EXPORT_SYMBOL(pmac_register_agp_pm);
3010
3011 void pmac_suspend_agp_for_card(struct pci_dev *dev)
3012 {
3013         if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
3014                 return;
3015         if (pmac_agp_bridge->bus != dev->bus)
3016                 return;
3017         pmac_agp_suspend(pmac_agp_bridge);
3018 }
3019 EXPORT_SYMBOL(pmac_suspend_agp_for_card);
3020
3021 void pmac_resume_agp_for_card(struct pci_dev *dev)
3022 {
3023         if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
3024                 return;
3025         if (pmac_agp_bridge->bus != dev->bus)
3026                 return;
3027         pmac_agp_resume(pmac_agp_bridge);
3028 }
3029 EXPORT_SYMBOL(pmac_resume_agp_for_card);