Merge branch 'upstream'
[linux-2.6] / drivers / net / hamradio / dmascc.c
1 /*
2  * Driver for high-speed SCC boards (those with DMA support)
3  * Copyright (C) 1997-2000 Klaus Kudielka
4  *
5  * S5SCC/DMA support by Janko Koleznik S52HI
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  */
21
22
23 #include <linux/module.h>
24 #include <linux/delay.h>
25 #include <linux/errno.h>
26 #include <linux/if_arp.h>
27 #include <linux/in.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 #include <linux/ioport.h>
31 #include <linux/kernel.h>
32 #include <linux/mm.h>
33 #include <linux/netdevice.h>
34 #include <linux/rtnetlink.h>
35 #include <linux/sockios.h>
36 #include <linux/workqueue.h>
37 #include <asm/atomic.h>
38 #include <asm/bitops.h>
39 #include <asm/dma.h>
40 #include <asm/io.h>
41 #include <asm/irq.h>
42 #include <asm/uaccess.h>
43 #include <net/ax25.h>
44 #include "z8530.h"
45
46
47 /* Number of buffers per channel */
48
49 #define NUM_TX_BUF      2       /* NUM_TX_BUF >= 1 (min. 2 recommended) */
50 #define NUM_RX_BUF      6       /* NUM_RX_BUF >= 1 (min. 2 recommended) */
51 #define BUF_SIZE        1576    /* BUF_SIZE >= mtu + hard_header_len */
52
53
54 /* Cards supported */
55
56 #define HW_PI           { "Ottawa PI", 0x300, 0x20, 0x10, 8, \
57                             0, 8, 1843200, 3686400 }
58 #define HW_PI2          { "Ottawa PI2", 0x300, 0x20, 0x10, 8, \
59                             0, 8, 3686400, 7372800 }
60 #define HW_TWIN         { "Gracilis PackeTwin", 0x200, 0x10, 0x10, 32, \
61                             0, 4, 6144000, 6144000 }
62 #define HW_S5           { "S5SCC/DMA", 0x200, 0x10, 0x10, 32, \
63                           0, 8, 4915200, 9830400 }
64
65 #define HARDWARE        { HW_PI, HW_PI2, HW_TWIN, HW_S5 }
66
67 #define TMR_0_HZ        25600   /* Frequency of timer 0 */
68
69 #define TYPE_PI         0
70 #define TYPE_PI2        1
71 #define TYPE_TWIN       2
72 #define TYPE_S5         3
73 #define NUM_TYPES       4
74
75 #define MAX_NUM_DEVS    32
76
77
78 /* SCC chips supported */
79
80 #define Z8530           0
81 #define Z85C30          1
82 #define Z85230          2
83
84 #define CHIPNAMES       { "Z8530", "Z85C30", "Z85230" }
85
86
87 /* I/O registers */
88
89 /* 8530 registers relative to card base */
90 #define SCCB_CMD        0x00
91 #define SCCB_DATA       0x01
92 #define SCCA_CMD        0x02
93 #define SCCA_DATA       0x03
94
95 /* 8253/8254 registers relative to card base */
96 #define TMR_CNT0        0x00
97 #define TMR_CNT1        0x01
98 #define TMR_CNT2        0x02
99 #define TMR_CTRL        0x03
100
101 /* Additional PI/PI2 registers relative to card base */
102 #define PI_DREQ_MASK    0x04
103
104 /* Additional PackeTwin registers relative to card base */
105 #define TWIN_INT_REG    0x08
106 #define TWIN_CLR_TMR1   0x09
107 #define TWIN_CLR_TMR2   0x0a
108 #define TWIN_SPARE_1    0x0b
109 #define TWIN_DMA_CFG    0x08
110 #define TWIN_SERIAL_CFG 0x09
111 #define TWIN_DMA_CLR_FF 0x0a
112 #define TWIN_SPARE_2    0x0b
113
114
115 /* PackeTwin I/O register values */
116
117 /* INT_REG */
118 #define TWIN_SCC_MSK       0x01
119 #define TWIN_TMR1_MSK      0x02
120 #define TWIN_TMR2_MSK      0x04
121 #define TWIN_INT_MSK       0x07
122
123 /* SERIAL_CFG */
124 #define TWIN_DTRA_ON       0x01
125 #define TWIN_DTRB_ON       0x02
126 #define TWIN_EXTCLKA       0x04
127 #define TWIN_EXTCLKB       0x08
128 #define TWIN_LOOPA_ON      0x10
129 #define TWIN_LOOPB_ON      0x20
130 #define TWIN_EI            0x80
131
132 /* DMA_CFG */
133 #define TWIN_DMA_HDX_T1    0x08
134 #define TWIN_DMA_HDX_R1    0x0a
135 #define TWIN_DMA_HDX_T3    0x14
136 #define TWIN_DMA_HDX_R3    0x16
137 #define TWIN_DMA_FDX_T3R1  0x1b
138 #define TWIN_DMA_FDX_T1R3  0x1d
139
140
141 /* Status values */
142
143 #define IDLE      0
144 #define TX_HEAD   1
145 #define TX_DATA   2
146 #define TX_PAUSE  3
147 #define TX_TAIL   4
148 #define RTS_OFF   5
149 #define WAIT      6
150 #define DCD_ON    7
151 #define RX_ON     8
152 #define DCD_OFF   9
153
154
155 /* Ioctls */
156
157 #define SIOCGSCCPARAM SIOCDEVPRIVATE
158 #define SIOCSSCCPARAM (SIOCDEVPRIVATE+1)
159
160
161 /* Data types */
162
163 struct scc_param {
164         int pclk_hz;            /* frequency of BRG input (don't change) */
165         int brg_tc;             /* BRG terminal count; BRG disabled if < 0 */
166         int nrzi;               /* 0 (nrz), 1 (nrzi) */
167         int clocks;             /* see dmascc_cfg documentation */
168         int txdelay;            /* [1/TMR_0_HZ] */
169         int txtimeout;          /* [1/HZ] */
170         int txtail;             /* [1/TMR_0_HZ] */
171         int waittime;           /* [1/TMR_0_HZ] */
172         int slottime;           /* [1/TMR_0_HZ] */
173         int persist;            /* 1 ... 256 */
174         int dma;                /* -1 (disable), 0, 1, 3 */
175         int txpause;            /* [1/TMR_0_HZ] */
176         int rtsoff;             /* [1/TMR_0_HZ] */
177         int dcdon;              /* [1/TMR_0_HZ] */
178         int dcdoff;             /* [1/TMR_0_HZ] */
179 };
180
181 struct scc_hardware {
182         char *name;
183         int io_region;
184         int io_delta;
185         int io_size;
186         int num_devs;
187         int scc_offset;
188         int tmr_offset;
189         int tmr_hz;
190         int pclk_hz;
191 };
192
193 struct scc_priv {
194         int type;
195         int chip;
196         struct net_device *dev;
197         struct scc_info *info;
198         struct net_device_stats stats;
199         int channel;
200         int card_base, scc_cmd, scc_data;
201         int tmr_cnt, tmr_ctrl, tmr_mode;
202         struct scc_param param;
203         char rx_buf[NUM_RX_BUF][BUF_SIZE];
204         int rx_len[NUM_RX_BUF];
205         int rx_ptr;
206         struct work_struct rx_work;
207         int rx_head, rx_tail, rx_count;
208         int rx_over;
209         char tx_buf[NUM_TX_BUF][BUF_SIZE];
210         int tx_len[NUM_TX_BUF];
211         int tx_ptr;
212         int tx_head, tx_tail, tx_count;
213         int state;
214         unsigned long tx_start;
215         int rr0;
216         spinlock_t *register_lock;      /* Per scc_info */
217         spinlock_t ring_lock;
218 };
219
220 struct scc_info {
221         int irq_used;
222         int twin_serial_cfg;
223         struct net_device *dev[2];
224         struct scc_priv priv[2];
225         struct scc_info *next;
226         spinlock_t register_lock;       /* Per device register lock */
227 };
228
229
230 /* Function declarations */
231 static int setup_adapter(int card_base, int type, int n) __init;
232
233 static void write_scc(struct scc_priv *priv, int reg, int val);
234 static void write_scc_data(struct scc_priv *priv, int val, int fast);
235 static int read_scc(struct scc_priv *priv, int reg);
236 static int read_scc_data(struct scc_priv *priv);
237
238 static int scc_open(struct net_device *dev);
239 static int scc_close(struct net_device *dev);
240 static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
241 static int scc_send_packet(struct sk_buff *skb, struct net_device *dev);
242 static struct net_device_stats *scc_get_stats(struct net_device *dev);
243 static int scc_set_mac_address(struct net_device *dev, void *sa);
244
245 static inline void tx_on(struct scc_priv *priv);
246 static inline void rx_on(struct scc_priv *priv);
247 static inline void rx_off(struct scc_priv *priv);
248 static void start_timer(struct scc_priv *priv, int t, int r15);
249 static inline unsigned char random(void);
250
251 static inline void z8530_isr(struct scc_info *info);
252 static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs);
253 static void rx_isr(struct scc_priv *priv);
254 static void special_condition(struct scc_priv *priv, int rc);
255 static void rx_bh(void *arg);
256 static void tx_isr(struct scc_priv *priv);
257 static void es_isr(struct scc_priv *priv);
258 static void tm_isr(struct scc_priv *priv);
259
260
261 /* Initialization variables */
262
263 static int io[MAX_NUM_DEVS] __initdata = { 0, };
264
265 /* Beware! hw[] is also used in cleanup_module(). */
266 static struct scc_hardware hw[NUM_TYPES] __initdata_or_module = HARDWARE;
267 static char ax25_broadcast[7] __initdata =
268     { 'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1,
269 '0' << 1 };
270 static char ax25_test[7] __initdata =
271     { 'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1,
272 '1' << 1 };
273
274
275 /* Global variables */
276
277 static struct scc_info *first;
278 static unsigned long rand;
279
280
281 MODULE_AUTHOR("Klaus Kudielka");
282 MODULE_DESCRIPTION("Driver for high-speed SCC boards");
283 MODULE_PARM(io, "1-" __MODULE_STRING(MAX_NUM_DEVS) "i");
284 MODULE_LICENSE("GPL");
285
286 static void __exit dmascc_exit(void)
287 {
288         int i;
289         struct scc_info *info;
290
291         while (first) {
292                 info = first;
293
294                 /* Unregister devices */
295                 for (i = 0; i < 2; i++)
296                         unregister_netdev(info->dev[i]);
297
298                 /* Reset board */
299                 if (info->priv[0].type == TYPE_TWIN)
300                         outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG);
301                 write_scc(&info->priv[0], R9, FHWRES);
302                 release_region(info->dev[0]->base_addr,
303                                hw[info->priv[0].type].io_size);
304
305                 for (i = 0; i < 2; i++)
306                         free_netdev(info->dev[i]);
307
308                 /* Free memory */
309                 first = info->next;
310                 kfree(info);
311         }
312 }
313
314 static int __init dmascc_init(void)
315 {
316         int h, i, j, n;
317         int base[MAX_NUM_DEVS], tcmd[MAX_NUM_DEVS], t0[MAX_NUM_DEVS],
318             t1[MAX_NUM_DEVS];
319         unsigned t_val;
320         unsigned long time, start[MAX_NUM_DEVS], delay[MAX_NUM_DEVS],
321             counting[MAX_NUM_DEVS];
322
323         /* Initialize random number generator */
324         rand = jiffies;
325         /* Cards found = 0 */
326         n = 0;
327         /* Warning message */
328         if (!io[0])
329                 printk(KERN_INFO "dmascc: autoprobing (dangerous)\n");
330
331         /* Run autodetection for each card type */
332         for (h = 0; h < NUM_TYPES; h++) {
333
334                 if (io[0]) {
335                         /* User-specified I/O address regions */
336                         for (i = 0; i < hw[h].num_devs; i++)
337                                 base[i] = 0;
338                         for (i = 0; i < MAX_NUM_DEVS && io[i]; i++) {
339                                 j = (io[i] -
340                                      hw[h].io_region) / hw[h].io_delta;
341                                 if (j >= 0 && j < hw[h].num_devs
342                                     && hw[h].io_region +
343                                     j * hw[h].io_delta == io[i]) {
344                                         base[j] = io[i];
345                                 }
346                         }
347                 } else {
348                         /* Default I/O address regions */
349                         for (i = 0; i < hw[h].num_devs; i++) {
350                                 base[i] =
351                                     hw[h].io_region + i * hw[h].io_delta;
352                         }
353                 }
354
355                 /* Check valid I/O address regions */
356                 for (i = 0; i < hw[h].num_devs; i++)
357                         if (base[i]) {
358                                 if (!request_region
359                                     (base[i], hw[h].io_size, "dmascc"))
360                                         base[i] = 0;
361                                 else {
362                                         tcmd[i] =
363                                             base[i] + hw[h].tmr_offset +
364                                             TMR_CTRL;
365                                         t0[i] =
366                                             base[i] + hw[h].tmr_offset +
367                                             TMR_CNT0;
368                                         t1[i] =
369                                             base[i] + hw[h].tmr_offset +
370                                             TMR_CNT1;
371                                 }
372                         }
373
374                 /* Start timers */
375                 for (i = 0; i < hw[h].num_devs; i++)
376                         if (base[i]) {
377                                 /* Timer 0: LSB+MSB, Mode 3, TMR_0_HZ */
378                                 outb(0x36, tcmd[i]);
379                                 outb((hw[h].tmr_hz / TMR_0_HZ) & 0xFF,
380                                      t0[i]);
381                                 outb((hw[h].tmr_hz / TMR_0_HZ) >> 8,
382                                      t0[i]);
383                                 /* Timer 1: LSB+MSB, Mode 0, HZ/10 */
384                                 outb(0x70, tcmd[i]);
385                                 outb((TMR_0_HZ / HZ * 10) & 0xFF, t1[i]);
386                                 outb((TMR_0_HZ / HZ * 10) >> 8, t1[i]);
387                                 start[i] = jiffies;
388                                 delay[i] = 0;
389                                 counting[i] = 1;
390                                 /* Timer 2: LSB+MSB, Mode 0 */
391                                 outb(0xb0, tcmd[i]);
392                         }
393                 time = jiffies;
394                 /* Wait until counter registers are loaded */
395                 udelay(2000000 / TMR_0_HZ);
396
397                 /* Timing loop */
398                 while (jiffies - time < 13) {
399                         for (i = 0; i < hw[h].num_devs; i++)
400                                 if (base[i] && counting[i]) {
401                                         /* Read back Timer 1: latch; read LSB; read MSB */
402                                         outb(0x40, tcmd[i]);
403                                         t_val =
404                                             inb(t1[i]) + (inb(t1[i]) << 8);
405                                         /* Also check whether counter did wrap */
406                                         if (t_val == 0
407                                             || t_val > TMR_0_HZ / HZ * 10)
408                                                 counting[i] = 0;
409                                         delay[i] = jiffies - start[i];
410                                 }
411                 }
412
413                 /* Evaluate measurements */
414                 for (i = 0; i < hw[h].num_devs; i++)
415                         if (base[i]) {
416                                 if ((delay[i] >= 9 && delay[i] <= 11) &&
417                                     /* Ok, we have found an adapter */
418                                     (setup_adapter(base[i], h, n) == 0))
419                                         n++;
420                                 else
421                                         release_region(base[i],
422                                                        hw[h].io_size);
423                         }
424
425         }                       /* NUM_TYPES */
426
427         /* If any adapter was successfully initialized, return ok */
428         if (n)
429                 return 0;
430
431         /* If no adapter found, return error */
432         printk(KERN_INFO "dmascc: no adapters found\n");
433         return -EIO;
434 }
435
436 module_init(dmascc_init);
437 module_exit(dmascc_exit);
438
439 static void dev_setup(struct net_device *dev)
440 {
441         dev->type = ARPHRD_AX25;
442         dev->hard_header_len = AX25_MAX_HEADER_LEN;
443         dev->mtu = 1500;
444         dev->addr_len = AX25_ADDR_LEN;
445         dev->tx_queue_len = 64;
446         memcpy(dev->broadcast, ax25_broadcast, AX25_ADDR_LEN);
447         memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN);
448 }
449
450 static int __init setup_adapter(int card_base, int type, int n)
451 {
452         int i, irq, chip;
453         struct scc_info *info;
454         struct net_device *dev;
455         struct scc_priv *priv;
456         unsigned long time;
457         unsigned int irqs;
458         int tmr_base = card_base + hw[type].tmr_offset;
459         int scc_base = card_base + hw[type].scc_offset;
460         char *chipnames[] = CHIPNAMES;
461
462         /* Allocate memory */
463         info = kmalloc(sizeof(struct scc_info), GFP_KERNEL | GFP_DMA);
464         if (!info) {
465                 printk(KERN_ERR "dmascc: "
466                        "could not allocate memory for %s at %#3x\n",
467                        hw[type].name, card_base);
468                 goto out;
469         }
470
471         /* Initialize what is necessary for write_scc and write_scc_data */
472         memset(info, 0, sizeof(struct scc_info));
473
474         info->dev[0] = alloc_netdev(0, "", dev_setup);
475         if (!info->dev[0]) {
476                 printk(KERN_ERR "dmascc: "
477                        "could not allocate memory for %s at %#3x\n",
478                        hw[type].name, card_base);
479                 goto out1;
480         }
481
482         info->dev[1] = alloc_netdev(0, "", dev_setup);
483         if (!info->dev[1]) {
484                 printk(KERN_ERR "dmascc: "
485                        "could not allocate memory for %s at %#3x\n",
486                        hw[type].name, card_base);
487                 goto out2;
488         }
489         spin_lock_init(&info->register_lock);
490
491         priv = &info->priv[0];
492         priv->type = type;
493         priv->card_base = card_base;
494         priv->scc_cmd = scc_base + SCCA_CMD;
495         priv->scc_data = scc_base + SCCA_DATA;
496         priv->register_lock = &info->register_lock;
497
498         /* Reset SCC */
499         write_scc(priv, R9, FHWRES | MIE | NV);
500
501         /* Determine type of chip by enabling SDLC/HDLC enhancements */
502         write_scc(priv, R15, SHDLCE);
503         if (!read_scc(priv, R15)) {
504                 /* WR7' not present. This is an ordinary Z8530 SCC. */
505                 chip = Z8530;
506         } else {
507                 /* Put one character in TX FIFO */
508                 write_scc_data(priv, 0, 0);
509                 if (read_scc(priv, R0) & Tx_BUF_EMP) {
510                         /* TX FIFO not full. This is a Z85230 ESCC with a 4-byte FIFO. */
511                         chip = Z85230;
512                 } else {
513                         /* TX FIFO full. This is a Z85C30 SCC with a 1-byte FIFO. */
514                         chip = Z85C30;
515                 }
516         }
517         write_scc(priv, R15, 0);
518
519         /* Start IRQ auto-detection */
520         irqs = probe_irq_on();
521
522         /* Enable interrupts */
523         if (type == TYPE_TWIN) {
524                 outb(0, card_base + TWIN_DMA_CFG);
525                 inb(card_base + TWIN_CLR_TMR1);
526                 inb(card_base + TWIN_CLR_TMR2);
527                 info->twin_serial_cfg = TWIN_EI;
528                 outb(info->twin_serial_cfg, card_base + TWIN_SERIAL_CFG);
529         } else {
530                 write_scc(priv, R15, CTSIE);
531                 write_scc(priv, R0, RES_EXT_INT);
532                 write_scc(priv, R1, EXT_INT_ENAB);
533         }
534
535         /* Start timer */
536         outb(1, tmr_base + TMR_CNT1);
537         outb(0, tmr_base + TMR_CNT1);
538
539         /* Wait and detect IRQ */
540         time = jiffies;
541         while (jiffies - time < 2 + HZ / TMR_0_HZ);
542         irq = probe_irq_off(irqs);
543
544         /* Clear pending interrupt, disable interrupts */
545         if (type == TYPE_TWIN) {
546                 inb(card_base + TWIN_CLR_TMR1);
547         } else {
548                 write_scc(priv, R1, 0);
549                 write_scc(priv, R15, 0);
550                 write_scc(priv, R0, RES_EXT_INT);
551         }
552
553         if (irq <= 0) {
554                 printk(KERN_ERR
555                        "dmascc: could not find irq of %s at %#3x (irq=%d)\n",
556                        hw[type].name, card_base, irq);
557                 goto out3;
558         }
559
560         /* Set up data structures */
561         for (i = 0; i < 2; i++) {
562                 dev = info->dev[i];
563                 priv = &info->priv[i];
564                 priv->type = type;
565                 priv->chip = chip;
566                 priv->dev = dev;
567                 priv->info = info;
568                 priv->channel = i;
569                 spin_lock_init(&priv->ring_lock);
570                 priv->register_lock = &info->register_lock;
571                 priv->card_base = card_base;
572                 priv->scc_cmd = scc_base + (i ? SCCB_CMD : SCCA_CMD);
573                 priv->scc_data = scc_base + (i ? SCCB_DATA : SCCA_DATA);
574                 priv->tmr_cnt = tmr_base + (i ? TMR_CNT2 : TMR_CNT1);
575                 priv->tmr_ctrl = tmr_base + TMR_CTRL;
576                 priv->tmr_mode = i ? 0xb0 : 0x70;
577                 priv->param.pclk_hz = hw[type].pclk_hz;
578                 priv->param.brg_tc = -1;
579                 priv->param.clocks = TCTRxCP | RCRTxCP;
580                 priv->param.persist = 256;
581                 priv->param.dma = -1;
582                 INIT_WORK(&priv->rx_work, rx_bh, priv);
583                 dev->priv = priv;
584                 sprintf(dev->name, "dmascc%i", 2 * n + i);
585                 SET_MODULE_OWNER(dev);
586                 dev->base_addr = card_base;
587                 dev->irq = irq;
588                 dev->open = scc_open;
589                 dev->stop = scc_close;
590                 dev->do_ioctl = scc_ioctl;
591                 dev->hard_start_xmit = scc_send_packet;
592                 dev->get_stats = scc_get_stats;
593                 dev->hard_header = ax25_hard_header;
594                 dev->rebuild_header = ax25_rebuild_header;
595                 dev->set_mac_address = scc_set_mac_address;
596         }
597         if (register_netdev(info->dev[0])) {
598                 printk(KERN_ERR "dmascc: could not register %s\n",
599                        info->dev[0]->name);
600                 goto out3;
601         }
602         if (register_netdev(info->dev[1])) {
603                 printk(KERN_ERR "dmascc: could not register %s\n",
604                        info->dev[1]->name);
605                 goto out4;
606         }
607
608
609         info->next = first;
610         first = info;
611         printk(KERN_INFO "dmascc: found %s (%s) at %#3x, irq %d\n",
612                hw[type].name, chipnames[chip], card_base, irq);
613         return 0;
614
615       out4:
616         unregister_netdev(info->dev[0]);
617       out3:
618         if (info->priv[0].type == TYPE_TWIN)
619                 outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG);
620         write_scc(&info->priv[0], R9, FHWRES);
621         free_netdev(info->dev[1]);
622       out2:
623         free_netdev(info->dev[0]);
624       out1:
625         kfree(info);
626       out:
627         return -1;
628 }
629
630
631 /* Driver functions */
632
633 static void write_scc(struct scc_priv *priv, int reg, int val)
634 {
635         unsigned long flags;
636         switch (priv->type) {
637         case TYPE_S5:
638                 if (reg)
639                         outb(reg, priv->scc_cmd);
640                 outb(val, priv->scc_cmd);
641                 return;
642         case TYPE_TWIN:
643                 if (reg)
644                         outb_p(reg, priv->scc_cmd);
645                 outb_p(val, priv->scc_cmd);
646                 return;
647         default:
648                 spin_lock_irqsave(priv->register_lock, flags);
649                 outb_p(0, priv->card_base + PI_DREQ_MASK);
650                 if (reg)
651                         outb_p(reg, priv->scc_cmd);
652                 outb_p(val, priv->scc_cmd);
653                 outb(1, priv->card_base + PI_DREQ_MASK);
654                 spin_unlock_irqrestore(priv->register_lock, flags);
655                 return;
656         }
657 }
658
659
660 static void write_scc_data(struct scc_priv *priv, int val, int fast)
661 {
662         unsigned long flags;
663         switch (priv->type) {
664         case TYPE_S5:
665                 outb(val, priv->scc_data);
666                 return;
667         case TYPE_TWIN:
668                 outb_p(val, priv->scc_data);
669                 return;
670         default:
671                 if (fast)
672                         outb_p(val, priv->scc_data);
673                 else {
674                         spin_lock_irqsave(priv->register_lock, flags);
675                         outb_p(0, priv->card_base + PI_DREQ_MASK);
676                         outb_p(val, priv->scc_data);
677                         outb(1, priv->card_base + PI_DREQ_MASK);
678                         spin_unlock_irqrestore(priv->register_lock, flags);
679                 }
680                 return;
681         }
682 }
683
684
685 static int read_scc(struct scc_priv *priv, int reg)
686 {
687         int rc;
688         unsigned long flags;
689         switch (priv->type) {
690         case TYPE_S5:
691                 if (reg)
692                         outb(reg, priv->scc_cmd);
693                 return inb(priv->scc_cmd);
694         case TYPE_TWIN:
695                 if (reg)
696                         outb_p(reg, priv->scc_cmd);
697                 return inb_p(priv->scc_cmd);
698         default:
699                 spin_lock_irqsave(priv->register_lock, flags);
700                 outb_p(0, priv->card_base + PI_DREQ_MASK);
701                 if (reg)
702                         outb_p(reg, priv->scc_cmd);
703                 rc = inb_p(priv->scc_cmd);
704                 outb(1, priv->card_base + PI_DREQ_MASK);
705                 spin_unlock_irqrestore(priv->register_lock, flags);
706                 return rc;
707         }
708 }
709
710
711 static int read_scc_data(struct scc_priv *priv)
712 {
713         int rc;
714         unsigned long flags;
715         switch (priv->type) {
716         case TYPE_S5:
717                 return inb(priv->scc_data);
718         case TYPE_TWIN:
719                 return inb_p(priv->scc_data);
720         default:
721                 spin_lock_irqsave(priv->register_lock, flags);
722                 outb_p(0, priv->card_base + PI_DREQ_MASK);
723                 rc = inb_p(priv->scc_data);
724                 outb(1, priv->card_base + PI_DREQ_MASK);
725                 spin_unlock_irqrestore(priv->register_lock, flags);
726                 return rc;
727         }
728 }
729
730
731 static int scc_open(struct net_device *dev)
732 {
733         struct scc_priv *priv = dev->priv;
734         struct scc_info *info = priv->info;
735         int card_base = priv->card_base;
736
737         /* Request IRQ if not already used by other channel */
738         if (!info->irq_used) {
739                 if (request_irq(dev->irq, scc_isr, 0, "dmascc", info)) {
740                         return -EAGAIN;
741                 }
742         }
743         info->irq_used++;
744
745         /* Request DMA if required */
746         if (priv->param.dma >= 0) {
747                 if (request_dma(priv->param.dma, "dmascc")) {
748                         if (--info->irq_used == 0)
749                                 free_irq(dev->irq, info);
750                         return -EAGAIN;
751                 } else {
752                         unsigned long flags = claim_dma_lock();
753                         clear_dma_ff(priv->param.dma);
754                         release_dma_lock(flags);
755                 }
756         }
757
758         /* Initialize local variables */
759         priv->rx_ptr = 0;
760         priv->rx_over = 0;
761         priv->rx_head = priv->rx_tail = priv->rx_count = 0;
762         priv->state = IDLE;
763         priv->tx_head = priv->tx_tail = priv->tx_count = 0;
764         priv->tx_ptr = 0;
765
766         /* Reset channel */
767         write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV);
768         /* X1 clock, SDLC mode */
769         write_scc(priv, R4, SDLC | X1CLK);
770         /* DMA */
771         write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
772         /* 8 bit RX char, RX disable */
773         write_scc(priv, R3, Rx8);
774         /* 8 bit TX char, TX disable */
775         write_scc(priv, R5, Tx8);
776         /* SDLC address field */
777         write_scc(priv, R6, 0);
778         /* SDLC flag */
779         write_scc(priv, R7, FLAG);
780         switch (priv->chip) {
781         case Z85C30:
782                 /* Select WR7' */
783                 write_scc(priv, R15, SHDLCE);
784                 /* Auto EOM reset */
785                 write_scc(priv, R7, AUTOEOM);
786                 write_scc(priv, R15, 0);
787                 break;
788         case Z85230:
789                 /* Select WR7' */
790                 write_scc(priv, R15, SHDLCE);
791                 /* The following bits are set (see 2.5.2.1):
792                    - Automatic EOM reset
793                    - Interrupt request if RX FIFO is half full
794                    This bit should be ignored in DMA mode (according to the
795                    documentation), but actually isn't. The receiver doesn't work if
796                    it is set. Thus, we have to clear it in DMA mode.
797                    - Interrupt/DMA request if TX FIFO is completely empty
798                    a) If set, the ESCC behaves as if it had no TX FIFO (Z85C30
799                    compatibility).
800                    b) If cleared, DMA requests may follow each other very quickly,
801                    filling up the TX FIFO.
802                    Advantage: TX works even in case of high bus latency.
803                    Disadvantage: Edge-triggered DMA request circuitry may miss
804                    a request. No more data is delivered, resulting
805                    in a TX FIFO underrun.
806                    Both PI2 and S5SCC/DMA seem to work fine with TXFIFOE cleared.
807                    The PackeTwin doesn't. I don't know about the PI, but let's
808                    assume it behaves like the PI2.
809                  */
810                 if (priv->param.dma >= 0) {
811                         if (priv->type == TYPE_TWIN)
812                                 write_scc(priv, R7, AUTOEOM | TXFIFOE);
813                         else
814                                 write_scc(priv, R7, AUTOEOM);
815                 } else {
816                         write_scc(priv, R7, AUTOEOM | RXFIFOH);
817                 }
818                 write_scc(priv, R15, 0);
819                 break;
820         }
821         /* Preset CRC, NRZ(I) encoding */
822         write_scc(priv, R10, CRCPS | (priv->param.nrzi ? NRZI : NRZ));
823
824         /* Configure baud rate generator */
825         if (priv->param.brg_tc >= 0) {
826                 /* Program BR generator */
827                 write_scc(priv, R12, priv->param.brg_tc & 0xFF);
828                 write_scc(priv, R13, (priv->param.brg_tc >> 8) & 0xFF);
829                 /* BRG source = SYS CLK; enable BRG; DTR REQ function (required by
830                    PackeTwin, not connected on the PI2); set DPLL source to BRG */
831                 write_scc(priv, R14, SSBR | DTRREQ | BRSRC | BRENABL);
832                 /* Enable DPLL */
833                 write_scc(priv, R14, SEARCH | DTRREQ | BRSRC | BRENABL);
834         } else {
835                 /* Disable BR generator */
836                 write_scc(priv, R14, DTRREQ | BRSRC);
837         }
838
839         /* Configure clocks */
840         if (priv->type == TYPE_TWIN) {
841                 /* Disable external TX clock receiver */
842                 outb((info->twin_serial_cfg &=
843                       ~(priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)),
844                      card_base + TWIN_SERIAL_CFG);
845         }
846         write_scc(priv, R11, priv->param.clocks);
847         if ((priv->type == TYPE_TWIN) && !(priv->param.clocks & TRxCOI)) {
848                 /* Enable external TX clock receiver */
849                 outb((info->twin_serial_cfg |=
850                       (priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)),
851                      card_base + TWIN_SERIAL_CFG);
852         }
853
854         /* Configure PackeTwin */
855         if (priv->type == TYPE_TWIN) {
856                 /* Assert DTR, enable interrupts */
857                 outb((info->twin_serial_cfg |= TWIN_EI |
858                       (priv->channel ? TWIN_DTRB_ON : TWIN_DTRA_ON)),
859                      card_base + TWIN_SERIAL_CFG);
860         }
861
862         /* Read current status */
863         priv->rr0 = read_scc(priv, R0);
864         /* Enable DCD interrupt */
865         write_scc(priv, R15, DCDIE);
866
867         netif_start_queue(dev);
868
869         return 0;
870 }
871
872
873 static int scc_close(struct net_device *dev)
874 {
875         struct scc_priv *priv = dev->priv;
876         struct scc_info *info = priv->info;
877         int card_base = priv->card_base;
878
879         netif_stop_queue(dev);
880
881         if (priv->type == TYPE_TWIN) {
882                 /* Drop DTR */
883                 outb((info->twin_serial_cfg &=
884                       (priv->channel ? ~TWIN_DTRB_ON : ~TWIN_DTRA_ON)),
885                      card_base + TWIN_SERIAL_CFG);
886         }
887
888         /* Reset channel, free DMA and IRQ */
889         write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV);
890         if (priv->param.dma >= 0) {
891                 if (priv->type == TYPE_TWIN)
892                         outb(0, card_base + TWIN_DMA_CFG);
893                 free_dma(priv->param.dma);
894         }
895         if (--info->irq_used == 0)
896                 free_irq(dev->irq, info);
897
898         return 0;
899 }
900
901
902 static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
903 {
904         struct scc_priv *priv = dev->priv;
905
906         switch (cmd) {
907         case SIOCGSCCPARAM:
908                 if (copy_to_user
909                     (ifr->ifr_data, &priv->param,
910                      sizeof(struct scc_param)))
911                         return -EFAULT;
912                 return 0;
913         case SIOCSSCCPARAM:
914                 if (!capable(CAP_NET_ADMIN))
915                         return -EPERM;
916                 if (netif_running(dev))
917                         return -EAGAIN;
918                 if (copy_from_user
919                     (&priv->param, ifr->ifr_data,
920                      sizeof(struct scc_param)))
921                         return -EFAULT;
922                 return 0;
923         default:
924                 return -EINVAL;
925         }
926 }
927
928
929 static int scc_send_packet(struct sk_buff *skb, struct net_device *dev)
930 {
931         struct scc_priv *priv = dev->priv;
932         unsigned long flags;
933         int i;
934
935         /* Temporarily stop the scheduler feeding us packets */
936         netif_stop_queue(dev);
937
938         /* Transfer data to DMA buffer */
939         i = priv->tx_head;
940         memcpy(priv->tx_buf[i], skb->data + 1, skb->len - 1);
941         priv->tx_len[i] = skb->len - 1;
942
943         /* Clear interrupts while we touch our circular buffers */
944
945         spin_lock_irqsave(&priv->ring_lock, flags);
946         /* Move the ring buffer's head */
947         priv->tx_head = (i + 1) % NUM_TX_BUF;
948         priv->tx_count++;
949
950         /* If we just filled up the last buffer, leave queue stopped.
951            The higher layers must wait until we have a DMA buffer
952            to accept the data. */
953         if (priv->tx_count < NUM_TX_BUF)
954                 netif_wake_queue(dev);
955
956         /* Set new TX state */
957         if (priv->state == IDLE) {
958                 /* Assert RTS, start timer */
959                 priv->state = TX_HEAD;
960                 priv->tx_start = jiffies;
961                 write_scc(priv, R5, TxCRC_ENAB | RTS | TxENAB | Tx8);
962                 write_scc(priv, R15, 0);
963                 start_timer(priv, priv->param.txdelay, 0);
964         }
965
966         /* Turn interrupts back on and free buffer */
967         spin_unlock_irqrestore(&priv->ring_lock, flags);
968         dev_kfree_skb(skb);
969
970         return 0;
971 }
972
973
974 static struct net_device_stats *scc_get_stats(struct net_device *dev)
975 {
976         struct scc_priv *priv = dev->priv;
977
978         return &priv->stats;
979 }
980
981
982 static int scc_set_mac_address(struct net_device *dev, void *sa)
983 {
984         memcpy(dev->dev_addr, ((struct sockaddr *) sa)->sa_data,
985                dev->addr_len);
986         return 0;
987 }
988
989
990 static inline void tx_on(struct scc_priv *priv)
991 {
992         int i, n;
993         unsigned long flags;
994
995         if (priv->param.dma >= 0) {
996                 n = (priv->chip == Z85230) ? 3 : 1;
997                 /* Program DMA controller */
998                 flags = claim_dma_lock();
999                 set_dma_mode(priv->param.dma, DMA_MODE_WRITE);
1000                 set_dma_addr(priv->param.dma,
1001                              (int) priv->tx_buf[priv->tx_tail] + n);
1002                 set_dma_count(priv->param.dma,
1003                               priv->tx_len[priv->tx_tail] - n);
1004                 release_dma_lock(flags);
1005                 /* Enable TX underrun interrupt */
1006                 write_scc(priv, R15, TxUIE);
1007                 /* Configure DREQ */
1008                 if (priv->type == TYPE_TWIN)
1009                         outb((priv->param.dma ==
1010                               1) ? TWIN_DMA_HDX_T1 : TWIN_DMA_HDX_T3,
1011                              priv->card_base + TWIN_DMA_CFG);
1012                 else
1013                         write_scc(priv, R1,
1014                                   EXT_INT_ENAB | WT_FN_RDYFN |
1015                                   WT_RDY_ENAB);
1016                 /* Write first byte(s) */
1017                 spin_lock_irqsave(priv->register_lock, flags);
1018                 for (i = 0; i < n; i++)
1019                         write_scc_data(priv,
1020                                        priv->tx_buf[priv->tx_tail][i], 1);
1021                 enable_dma(priv->param.dma);
1022                 spin_unlock_irqrestore(priv->register_lock, flags);
1023         } else {
1024                 write_scc(priv, R15, TxUIE);
1025                 write_scc(priv, R1,
1026                           EXT_INT_ENAB | WT_FN_RDYFN | TxINT_ENAB);
1027                 tx_isr(priv);
1028         }
1029         /* Reset EOM latch if we do not have the AUTOEOM feature */
1030         if (priv->chip == Z8530)
1031                 write_scc(priv, R0, RES_EOM_L);
1032 }
1033
1034
1035 static inline void rx_on(struct scc_priv *priv)
1036 {
1037         unsigned long flags;
1038
1039         /* Clear RX FIFO */
1040         while (read_scc(priv, R0) & Rx_CH_AV)
1041                 read_scc_data(priv);
1042         priv->rx_over = 0;
1043         if (priv->param.dma >= 0) {
1044                 /* Program DMA controller */
1045                 flags = claim_dma_lock();
1046                 set_dma_mode(priv->param.dma, DMA_MODE_READ);
1047                 set_dma_addr(priv->param.dma,
1048                              (int) priv->rx_buf[priv->rx_head]);
1049                 set_dma_count(priv->param.dma, BUF_SIZE);
1050                 release_dma_lock(flags);
1051                 enable_dma(priv->param.dma);
1052                 /* Configure PackeTwin DMA */
1053                 if (priv->type == TYPE_TWIN) {
1054                         outb((priv->param.dma ==
1055                               1) ? TWIN_DMA_HDX_R1 : TWIN_DMA_HDX_R3,
1056                              priv->card_base + TWIN_DMA_CFG);
1057                 }
1058                 /* Sp. cond. intr. only, ext int enable, RX DMA enable */
1059                 write_scc(priv, R1, EXT_INT_ENAB | INT_ERR_Rx |
1060                           WT_RDY_RT | WT_FN_RDYFN | WT_RDY_ENAB);
1061         } else {
1062                 /* Reset current frame */
1063                 priv->rx_ptr = 0;
1064                 /* Intr. on all Rx characters and Sp. cond., ext int enable */
1065                 write_scc(priv, R1, EXT_INT_ENAB | INT_ALL_Rx | WT_RDY_RT |
1066                           WT_FN_RDYFN);
1067         }
1068         write_scc(priv, R0, ERR_RES);
1069         write_scc(priv, R3, RxENABLE | Rx8 | RxCRC_ENAB);
1070 }
1071
1072
1073 static inline void rx_off(struct scc_priv *priv)
1074 {
1075         /* Disable receiver */
1076         write_scc(priv, R3, Rx8);
1077         /* Disable DREQ / RX interrupt */
1078         if (priv->param.dma >= 0 && priv->type == TYPE_TWIN)
1079                 outb(0, priv->card_base + TWIN_DMA_CFG);
1080         else
1081                 write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
1082         /* Disable DMA */
1083         if (priv->param.dma >= 0)
1084                 disable_dma(priv->param.dma);
1085 }
1086
1087
1088 static void start_timer(struct scc_priv *priv, int t, int r15)
1089 {
1090         unsigned long flags;
1091
1092         outb(priv->tmr_mode, priv->tmr_ctrl);
1093         if (t == 0) {
1094                 tm_isr(priv);
1095         } else if (t > 0) {
1096                 save_flags(flags);
1097                 cli();
1098                 outb(t & 0xFF, priv->tmr_cnt);
1099                 outb((t >> 8) & 0xFF, priv->tmr_cnt);
1100                 if (priv->type != TYPE_TWIN) {
1101                         write_scc(priv, R15, r15 | CTSIE);
1102                         priv->rr0 |= CTS;
1103                 }
1104                 restore_flags(flags);
1105         }
1106 }
1107
1108
1109 static inline unsigned char random(void)
1110 {
1111         /* See "Numerical Recipes in C", second edition, p. 284 */
1112         rand = rand * 1664525L + 1013904223L;
1113         return (unsigned char) (rand >> 24);
1114 }
1115
1116 static inline void z8530_isr(struct scc_info *info)
1117 {
1118         int is, i = 100;
1119
1120         while ((is = read_scc(&info->priv[0], R3)) && i--) {
1121                 if (is & CHARxIP) {
1122                         rx_isr(&info->priv[0]);
1123                 } else if (is & CHATxIP) {
1124                         tx_isr(&info->priv[0]);
1125                 } else if (is & CHAEXT) {
1126                         es_isr(&info->priv[0]);
1127                 } else if (is & CHBRxIP) {
1128                         rx_isr(&info->priv[1]);
1129                 } else if (is & CHBTxIP) {
1130                         tx_isr(&info->priv[1]);
1131                 } else {
1132                         es_isr(&info->priv[1]);
1133                 }
1134                 write_scc(&info->priv[0], R0, RES_H_IUS);
1135                 i++;
1136         }
1137         if (i < 0) {
1138                 printk(KERN_ERR "dmascc: stuck in ISR with RR3=0x%02x.\n",
1139                        is);
1140         }
1141         /* Ok, no interrupts pending from this 8530. The INT line should
1142            be inactive now. */
1143 }
1144
1145
1146 static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs)
1147 {
1148         struct scc_info *info = dev_id;
1149
1150         spin_lock(info->priv[0].register_lock);
1151         /* At this point interrupts are enabled, and the interrupt under service
1152            is already acknowledged, but masked off.
1153
1154            Interrupt processing: We loop until we know that the IRQ line is
1155            low. If another positive edge occurs afterwards during the ISR,
1156            another interrupt will be triggered by the interrupt controller
1157            as soon as the IRQ level is enabled again (see asm/irq.h).
1158
1159            Bottom-half handlers will be processed after scc_isr(). This is
1160            important, since we only have small ringbuffers and want new data
1161            to be fetched/delivered immediately. */
1162
1163         if (info->priv[0].type == TYPE_TWIN) {
1164                 int is, card_base = info->priv[0].card_base;
1165                 while ((is = ~inb(card_base + TWIN_INT_REG)) &
1166                        TWIN_INT_MSK) {
1167                         if (is & TWIN_SCC_MSK) {
1168                                 z8530_isr(info);
1169                         } else if (is & TWIN_TMR1_MSK) {
1170                                 inb(card_base + TWIN_CLR_TMR1);
1171                                 tm_isr(&info->priv[0]);
1172                         } else {
1173                                 inb(card_base + TWIN_CLR_TMR2);
1174                                 tm_isr(&info->priv[1]);
1175                         }
1176                 }
1177         } else
1178                 z8530_isr(info);
1179         spin_unlock(info->priv[0].register_lock);
1180         return IRQ_HANDLED;
1181 }
1182
1183
1184 static void rx_isr(struct scc_priv *priv)
1185 {
1186         if (priv->param.dma >= 0) {
1187                 /* Check special condition and perform error reset. See 2.4.7.5. */
1188                 special_condition(priv, read_scc(priv, R1));
1189                 write_scc(priv, R0, ERR_RES);
1190         } else {
1191                 /* Check special condition for each character. Error reset not necessary.
1192                    Same algorithm for SCC and ESCC. See 2.4.7.1 and 2.4.7.4. */
1193                 int rc;
1194                 while (read_scc(priv, R0) & Rx_CH_AV) {
1195                         rc = read_scc(priv, R1);
1196                         if (priv->rx_ptr < BUF_SIZE)
1197                                 priv->rx_buf[priv->rx_head][priv->
1198                                                             rx_ptr++] =
1199                                     read_scc_data(priv);
1200                         else {
1201                                 priv->rx_over = 2;
1202                                 read_scc_data(priv);
1203                         }
1204                         special_condition(priv, rc);
1205                 }
1206         }
1207 }
1208
1209
1210 static void special_condition(struct scc_priv *priv, int rc)
1211 {
1212         int cb;
1213         unsigned long flags;
1214
1215         /* See Figure 2-15. Only overrun and EOF need to be checked. */
1216
1217         if (rc & Rx_OVR) {
1218                 /* Receiver overrun */
1219                 priv->rx_over = 1;
1220                 if (priv->param.dma < 0)
1221                         write_scc(priv, R0, ERR_RES);
1222         } else if (rc & END_FR) {
1223                 /* End of frame. Get byte count */
1224                 if (priv->param.dma >= 0) {
1225                         flags = claim_dma_lock();
1226                         cb = BUF_SIZE - get_dma_residue(priv->param.dma) -
1227                             2;
1228                         release_dma_lock(flags);
1229                 } else {
1230                         cb = priv->rx_ptr - 2;
1231                 }
1232                 if (priv->rx_over) {
1233                         /* We had an overrun */
1234                         priv->stats.rx_errors++;
1235                         if (priv->rx_over == 2)
1236                                 priv->stats.rx_length_errors++;
1237                         else
1238                                 priv->stats.rx_fifo_errors++;
1239                         priv->rx_over = 0;
1240                 } else if (rc & CRC_ERR) {
1241                         /* Count invalid CRC only if packet length >= minimum */
1242                         if (cb >= 15) {
1243                                 priv->stats.rx_errors++;
1244                                 priv->stats.rx_crc_errors++;
1245                         }
1246                 } else {
1247                         if (cb >= 15) {
1248                                 if (priv->rx_count < NUM_RX_BUF - 1) {
1249                                         /* Put good frame in FIFO */
1250                                         priv->rx_len[priv->rx_head] = cb;
1251                                         priv->rx_head =
1252                                             (priv->rx_head +
1253                                              1) % NUM_RX_BUF;
1254                                         priv->rx_count++;
1255                                         schedule_work(&priv->rx_work);
1256                                 } else {
1257                                         priv->stats.rx_errors++;
1258                                         priv->stats.rx_over_errors++;
1259                                 }
1260                         }
1261                 }
1262                 /* Get ready for new frame */
1263                 if (priv->param.dma >= 0) {
1264                         flags = claim_dma_lock();
1265                         set_dma_addr(priv->param.dma,
1266                                      (int) priv->rx_buf[priv->rx_head]);
1267                         set_dma_count(priv->param.dma, BUF_SIZE);
1268                         release_dma_lock(flags);
1269                 } else {
1270                         priv->rx_ptr = 0;
1271                 }
1272         }
1273 }
1274
1275
1276 static void rx_bh(void *arg)
1277 {
1278         struct scc_priv *priv = arg;
1279         int i = priv->rx_tail;
1280         int cb;
1281         unsigned long flags;
1282         struct sk_buff *skb;
1283         unsigned char *data;
1284
1285         spin_lock_irqsave(&priv->ring_lock, flags);
1286         while (priv->rx_count) {
1287                 spin_unlock_irqrestore(&priv->ring_lock, flags);
1288                 cb = priv->rx_len[i];
1289                 /* Allocate buffer */
1290                 skb = dev_alloc_skb(cb + 1);
1291                 if (skb == NULL) {
1292                         /* Drop packet */
1293                         priv->stats.rx_dropped++;
1294                 } else {
1295                         /* Fill buffer */
1296                         data = skb_put(skb, cb + 1);
1297                         data[0] = 0;
1298                         memcpy(&data[1], priv->rx_buf[i], cb);
1299                         skb->protocol = ax25_type_trans(skb, priv->dev);
1300                         netif_rx(skb);
1301                         priv->dev->last_rx = jiffies;
1302                         priv->stats.rx_packets++;
1303                         priv->stats.rx_bytes += cb;
1304                 }
1305                 spin_lock_irqsave(&priv->ring_lock, flags);
1306                 /* Move tail */
1307                 priv->rx_tail = i = (i + 1) % NUM_RX_BUF;
1308                 priv->rx_count--;
1309         }
1310         spin_unlock_irqrestore(&priv->ring_lock, flags);
1311 }
1312
1313
1314 static void tx_isr(struct scc_priv *priv)
1315 {
1316         int i = priv->tx_tail, p = priv->tx_ptr;
1317
1318         /* Suspend TX interrupts if we don't want to send anything.
1319            See Figure 2-22. */
1320         if (p == priv->tx_len[i]) {
1321                 write_scc(priv, R0, RES_Tx_P);
1322                 return;
1323         }
1324
1325         /* Write characters */
1326         while ((read_scc(priv, R0) & Tx_BUF_EMP) && p < priv->tx_len[i]) {
1327                 write_scc_data(priv, priv->tx_buf[i][p++], 0);
1328         }
1329
1330         /* Reset EOM latch of Z8530 */
1331         if (!priv->tx_ptr && p && priv->chip == Z8530)
1332                 write_scc(priv, R0, RES_EOM_L);
1333
1334         priv->tx_ptr = p;
1335 }
1336
1337
1338 static void es_isr(struct scc_priv *priv)
1339 {
1340         int i, rr0, drr0, res;
1341         unsigned long flags;
1342
1343         /* Read status, reset interrupt bit (open latches) */
1344         rr0 = read_scc(priv, R0);
1345         write_scc(priv, R0, RES_EXT_INT);
1346         drr0 = priv->rr0 ^ rr0;
1347         priv->rr0 = rr0;
1348
1349         /* Transmit underrun (2.4.9.6). We can't check the TxEOM flag, since
1350            it might have already been cleared again by AUTOEOM. */
1351         if (priv->state == TX_DATA) {
1352                 /* Get remaining bytes */
1353                 i = priv->tx_tail;
1354                 if (priv->param.dma >= 0) {
1355                         disable_dma(priv->param.dma);
1356                         flags = claim_dma_lock();
1357                         res = get_dma_residue(priv->param.dma);
1358                         release_dma_lock(flags);
1359                 } else {
1360                         res = priv->tx_len[i] - priv->tx_ptr;
1361                         priv->tx_ptr = 0;
1362                 }
1363                 /* Disable DREQ / TX interrupt */
1364                 if (priv->param.dma >= 0 && priv->type == TYPE_TWIN)
1365                         outb(0, priv->card_base + TWIN_DMA_CFG);
1366                 else
1367                         write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
1368                 if (res) {
1369                         /* Update packet statistics */
1370                         priv->stats.tx_errors++;
1371                         priv->stats.tx_fifo_errors++;
1372                         /* Other underrun interrupts may already be waiting */
1373                         write_scc(priv, R0, RES_EXT_INT);
1374                         write_scc(priv, R0, RES_EXT_INT);
1375                 } else {
1376                         /* Update packet statistics */
1377                         priv->stats.tx_packets++;
1378                         priv->stats.tx_bytes += priv->tx_len[i];
1379                         /* Remove frame from FIFO */
1380                         priv->tx_tail = (i + 1) % NUM_TX_BUF;
1381                         priv->tx_count--;
1382                         /* Inform upper layers */
1383                         netif_wake_queue(priv->dev);
1384                 }
1385                 /* Switch state */
1386                 write_scc(priv, R15, 0);
1387                 if (priv->tx_count &&
1388                     (jiffies - priv->tx_start) < priv->param.txtimeout) {
1389                         priv->state = TX_PAUSE;
1390                         start_timer(priv, priv->param.txpause, 0);
1391                 } else {
1392                         priv->state = TX_TAIL;
1393                         start_timer(priv, priv->param.txtail, 0);
1394                 }
1395         }
1396
1397         /* DCD transition */
1398         if (drr0 & DCD) {
1399                 if (rr0 & DCD) {
1400                         switch (priv->state) {
1401                         case IDLE:
1402                         case WAIT:
1403                                 priv->state = DCD_ON;
1404                                 write_scc(priv, R15, 0);
1405                                 start_timer(priv, priv->param.dcdon, 0);
1406                         }
1407                 } else {
1408                         switch (priv->state) {
1409                         case RX_ON:
1410                                 rx_off(priv);
1411                                 priv->state = DCD_OFF;
1412                                 write_scc(priv, R15, 0);
1413                                 start_timer(priv, priv->param.dcdoff, 0);
1414                         }
1415                 }
1416         }
1417
1418         /* CTS transition */
1419         if ((drr0 & CTS) && (~rr0 & CTS) && priv->type != TYPE_TWIN)
1420                 tm_isr(priv);
1421
1422 }
1423
1424
1425 static void tm_isr(struct scc_priv *priv)
1426 {
1427         switch (priv->state) {
1428         case TX_HEAD:
1429         case TX_PAUSE:
1430                 tx_on(priv);
1431                 priv->state = TX_DATA;
1432                 break;
1433         case TX_TAIL:
1434                 write_scc(priv, R5, TxCRC_ENAB | Tx8);
1435                 priv->state = RTS_OFF;
1436                 if (priv->type != TYPE_TWIN)
1437                         write_scc(priv, R15, 0);
1438                 start_timer(priv, priv->param.rtsoff, 0);
1439                 break;
1440         case RTS_OFF:
1441                 write_scc(priv, R15, DCDIE);
1442                 priv->rr0 = read_scc(priv, R0);
1443                 if (priv->rr0 & DCD) {
1444                         priv->stats.collisions++;
1445                         rx_on(priv);
1446                         priv->state = RX_ON;
1447                 } else {
1448                         priv->state = WAIT;
1449                         start_timer(priv, priv->param.waittime, DCDIE);
1450                 }
1451                 break;
1452         case WAIT:
1453                 if (priv->tx_count) {
1454                         priv->state = TX_HEAD;
1455                         priv->tx_start = jiffies;
1456                         write_scc(priv, R5,
1457                                   TxCRC_ENAB | RTS | TxENAB | Tx8);
1458                         write_scc(priv, R15, 0);
1459                         start_timer(priv, priv->param.txdelay, 0);
1460                 } else {
1461                         priv->state = IDLE;
1462                         if (priv->type != TYPE_TWIN)
1463                                 write_scc(priv, R15, DCDIE);
1464                 }
1465                 break;
1466         case DCD_ON:
1467         case DCD_OFF:
1468                 write_scc(priv, R15, DCDIE);
1469                 priv->rr0 = read_scc(priv, R0);
1470                 if (priv->rr0 & DCD) {
1471                         rx_on(priv);
1472                         priv->state = RX_ON;
1473                 } else {
1474                         priv->state = WAIT;
1475                         start_timer(priv,
1476                                     random() / priv->param.persist *
1477                                     priv->param.slottime, DCDIE);
1478                 }
1479                 break;
1480         }
1481 }