git.oblomov.eu Git - linux-2.6/blob - drivers/net/ibm_emac/ibm_emac_phy.c

   1 /*
   2  * drivers/net/ibm_emac/ibm_emac_phy.c
   3  *
   4  * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
   5  * Borrowed from sungem_phy.c, though I only kept the generic MII
   6  * driver for now.
   7  *
   8  * This file should be shared with other drivers or eventually
   9  * merged as the "low level" part of miilib
  10  *
  11  * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
  12  * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
  13  *
  14  */
  15 #include <linux/module.h>
  16 #include <linux/kernel.h>
  17 #include <linux/types.h>
  18 #include <linux/netdevice.h>
  19 #include <linux/mii.h>
  20 #include <linux/ethtool.h>
  21 #include <linux/delay.h>
  22
  23 #include <asm/ocp.h>
  24
  25 #include "ibm_emac_core.h"
  26 #include "ibm_emac_phy.h"
  27
  28 static inline int phy_read(struct mii_phy *phy, int reg)
  29 {
  30         return phy->mdio_read(phy->dev, phy->address, reg);
  31 }
  32
  33 static inline void phy_write(struct mii_phy *phy, int reg, int val)
  34 {
  35         phy->mdio_write(phy->dev, phy->address, reg, val);
  36 }
  37
  38 /*
  39  * polls MII_BMCR until BMCR_RESET bit clears or operation times out.
  40  *
  41  * returns:
  42  *      >= 0 => success, value in BMCR returned to caller
  43  *      -EBUSY => failure, RESET bit never cleared
  44  *      otherwise => failure, lower level PHY read failed
  45  */
  46 static int mii_spin_reset_complete(struct mii_phy *phy)
  47 {
  48         int val;
  49         int limit = 10000;
  50
  51         while (limit--) {
  52                 val = phy_read(phy, MII_BMCR);
  53                 if (val >= 0 && !(val & BMCR_RESET))
  54                         return val;     /* success */
  55                 udelay(10);
  56         }
  57         if (val & BMCR_RESET)
  58                 val = -EBUSY;
  59
  60         if (net_ratelimit())
  61                 printk(KERN_ERR "emac%d: PHY reset timeout (%d)\n",
  62                        ((struct ocp_enet_private *)phy->dev->priv)->def->index,
  63                        val);
  64         return val;
  65 }
  66
  67 int mii_reset_phy(struct mii_phy *phy)
  68 {
  69         int val;
  70
  71         val = phy_read(phy, MII_BMCR);
  72         val &= ~BMCR_ISOLATE;
  73         val |= BMCR_RESET;
  74         phy_write(phy, MII_BMCR, val);
  75
  76         udelay(300);
  77
  78         val = mii_spin_reset_complete(phy);
  79         if (val >= 0 && (val & BMCR_ISOLATE))
  80                 phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
  81
  82         return val < 0;
  83 }
  84
  85 static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
  86 {
  87         int ctl, adv;
  88
  89         phy->autoneg = AUTONEG_ENABLE;
  90         phy->speed = SPEED_10;
  91         phy->duplex = DUPLEX_HALF;
  92         phy->pause = phy->asym_pause = 0;
  93         phy->advertising = advertise;
  94
  95         /* Setup standard advertise */
  96         adv = phy_read(phy, MII_ADVERTISE);
  97         if (adv < 0)
  98                 return adv;
  99         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
 100                  ADVERTISE_PAUSE_ASYM);
 101         if (advertise & ADVERTISED_10baseT_Half)
 102                 adv |= ADVERTISE_10HALF;
 103         if (advertise & ADVERTISED_10baseT_Full)
 104                 adv |= ADVERTISE_10FULL;
 105         if (advertise & ADVERTISED_100baseT_Half)
 106                 adv |= ADVERTISE_100HALF;
 107         if (advertise & ADVERTISED_100baseT_Full)
 108                 adv |= ADVERTISE_100FULL;
 109         if (advertise & ADVERTISED_Pause)
 110                 adv |= ADVERTISE_PAUSE_CAP;
 111         if (advertise & ADVERTISED_Asym_Pause)
 112                 adv |= ADVERTISE_PAUSE_ASYM;
 113         phy_write(phy, MII_ADVERTISE, adv);
 114
 115         if (phy->features &
 116             (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
 117                 adv = phy_read(phy, MII_CTRL1000);
 118                 if (adv < 0)
 119                         return adv;
 120                 adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 121                 if (advertise & ADVERTISED_1000baseT_Full)
 122                         adv |= ADVERTISE_1000FULL;
 123                 if (advertise & ADVERTISED_1000baseT_Half)
 124                         adv |= ADVERTISE_1000HALF;
 125                 phy_write(phy, MII_CTRL1000, adv);
 126         }
 127
 128         /* Start/Restart aneg */
 129         /* on some PHYs (e.g. National DP83843) a write to MII_ADVERTISE
 130          * causes BMCR_RESET to be set on the next read of MII_BMCR, which
 131          * if not checked for causes the PHY to be reset below */
 132         ctl = mii_spin_reset_complete(phy);
 133         if (ctl < 0)
 134                 return ctl;
 135
 136         ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
 137         phy_write(phy, MII_BMCR, ctl);
 138
 139         return 0;
 140 }
 141
 142 static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
 143 {
 144         int ctl;
 145
 146         phy->autoneg = AUTONEG_DISABLE;
 147         phy->speed = speed;
 148         phy->duplex = fd;
 149         phy->pause = phy->asym_pause = 0;
 150
 151         /* First reset the PHY */
 152         mii_reset_phy(phy);
 153
 154         ctl = phy_read(phy, MII_BMCR);
 155         if (ctl < 0)
 156                 return ctl;
 157         ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE | BMCR_SPEED1000);
 158
 159         /* Select speed & duplex */
 160         switch (speed) {
 161         case SPEED_10:
 162                 break;
 163         case SPEED_100:
 164                 ctl |= BMCR_SPEED100;
 165                 break;
 166         case SPEED_1000:
 167                 ctl |= BMCR_SPEED1000;
 168                 break;
 169         default:
 170                 return -EINVAL;
 171         }
 172         if (fd == DUPLEX_FULL)
 173                 ctl |= BMCR_FULLDPLX;
 174         phy_write(phy, MII_BMCR, ctl);
 175
 176         return 0;
 177 }
 178
 179 static int genmii_poll_link(struct mii_phy *phy)
 180 {
 181         int status;
 182
 183         /* Clear latched value with dummy read */
 184         phy_read(phy, MII_BMSR);
 185         status = phy_read(phy, MII_BMSR);
 186         if (status < 0 || (status & BMSR_LSTATUS) == 0)
 187                 return 0;
 188         if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
 189                 return 0;
 190         return 1;
 191 }
 192
 193 static int genmii_read_link(struct mii_phy *phy)
 194 {
 195         if (phy->autoneg == AUTONEG_ENABLE) {
 196                 int glpa = 0;
 197                 int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
 198                 if (lpa < 0)
 199                         return lpa;
 200
 201                 if (phy->features &
 202                     (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
 203                         int adv = phy_read(phy, MII_CTRL1000);
 204                         glpa = phy_read(phy, MII_STAT1000);
 205
 206                         if (glpa < 0 || adv < 0)
 207                                 return adv;
 208
 209                         glpa &= adv << 2;
 210                 }
 211
 212                 phy->speed = SPEED_10;
 213                 phy->duplex = DUPLEX_HALF;
 214                 phy->pause = phy->asym_pause = 0;
 215
 216                 if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
 217                         phy->speed = SPEED_1000;
 218                         if (glpa & LPA_1000FULL)
 219                                 phy->duplex = DUPLEX_FULL;
 220                 } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
 221                         phy->speed = SPEED_100;
 222                         if (lpa & LPA_100FULL)
 223                                 phy->duplex = DUPLEX_FULL;
 224                 } else if (lpa & LPA_10FULL)
 225                         phy->duplex = DUPLEX_FULL;
 226
 227                 if (phy->duplex == DUPLEX_FULL) {
 228                         phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 229                         phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 230                 }
 231         } else {
 232                 int bmcr = phy_read(phy, MII_BMCR);
 233                 if (bmcr < 0)
 234                         return bmcr;
 235
 236                 if (bmcr & BMCR_FULLDPLX)
 237                         phy->duplex = DUPLEX_FULL;
 238                 else
 239                         phy->duplex = DUPLEX_HALF;
 240                 if (bmcr & BMCR_SPEED1000)
 241                         phy->speed = SPEED_1000;
 242                 else if (bmcr & BMCR_SPEED100)
 243                         phy->speed = SPEED_100;
 244                 else
 245                         phy->speed = SPEED_10;
 246
 247                 phy->pause = phy->asym_pause = 0;
 248         }
 249         return 0;
 250 }
 251
 252 /* Generic implementation for most 10/100/1000 PHYs */
 253 static struct mii_phy_ops generic_phy_ops = {
 254         .setup_aneg     = genmii_setup_aneg,
 255         .setup_forced   = genmii_setup_forced,
 256         .poll_link      = genmii_poll_link,
 257         .read_link      = genmii_read_link
 258 };
 259
 260 static struct mii_phy_def genmii_phy_def = {
 261         .phy_id         = 0x00000000,
 262         .phy_id_mask    = 0x00000000,
 263         .name           = "Generic MII",
 264         .ops            = &generic_phy_ops
 265 };
 266
 267 /* CIS8201 */
 268 #define MII_CIS8201_10BTCSR     0x16
 269 #define  TENBTCSR_ECHO_DISABLE  0x2000
 270 #define MII_CIS8201_EPCR        0x17
 271 #define  EPCR_MODE_MASK         0x3000
 272 #define  EPCR_GMII_MODE         0x0000
 273 #define  EPCR_RGMII_MODE        0x1000
 274 #define  EPCR_TBI_MODE          0x2000
 275 #define  EPCR_RTBI_MODE         0x3000
 276 #define MII_CIS8201_ACSR        0x1c
 277 #define  ACSR_PIN_PRIO_SELECT   0x0004
 278
 279 static int cis8201_init(struct mii_phy *phy)
 280 {
 281         int epcr;
 282
 283         epcr = phy_read(phy, MII_CIS8201_EPCR);
 284         if (epcr < 0)
 285                 return epcr;
 286
 287         epcr &= ~EPCR_MODE_MASK;
 288
 289         switch (phy->mode) {
 290         case PHY_MODE_TBI:
 291                 epcr |= EPCR_TBI_MODE;
 292                 break;
 293         case PHY_MODE_RTBI:
 294                 epcr |= EPCR_RTBI_MODE;
 295                 break;
 296         case PHY_MODE_GMII:
 297                 epcr |= EPCR_GMII_MODE;
 298                 break;
 299         case PHY_MODE_RGMII:
 300         default:
 301                 epcr |= EPCR_RGMII_MODE;
 302         }
 303
 304         phy_write(phy, MII_CIS8201_EPCR, epcr);
 305
 306         /* MII regs override strap pins */
 307         phy_write(phy, MII_CIS8201_ACSR,
 308                   phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
 309
 310         /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
 311         phy_write(phy, MII_CIS8201_10BTCSR,
 312                   phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
 313
 314         return 0;
 315 }
 316
 317 static struct mii_phy_ops cis8201_phy_ops = {
 318         .init           = cis8201_init,
 319         .setup_aneg     = genmii_setup_aneg,
 320         .setup_forced   = genmii_setup_forced,
 321         .poll_link      = genmii_poll_link,
 322         .read_link      = genmii_read_link
 323 };
 324
 325 static struct mii_phy_def cis8201_phy_def = {
 326         .phy_id         = 0x000fc410,
 327         .phy_id_mask    = 0x000ffff0,
 328         .name           = "CIS8201 Gigabit Ethernet",
 329         .ops            = &cis8201_phy_ops
 330 };
 331
 332 static struct mii_phy_def *mii_phy_table[] = {
 333         &cis8201_phy_def,
 334         &genmii_phy_def,
 335         NULL
 336 };
 337
 338 int mii_phy_probe(struct mii_phy *phy, int address)
 339 {
 340         struct mii_phy_def *def;
 341         int i;
 342         int id;
 343
 344         phy->autoneg = AUTONEG_DISABLE;
 345         phy->advertising = 0;
 346         phy->address = address;
 347         phy->speed = SPEED_10;
 348         phy->duplex = DUPLEX_HALF;
 349         phy->pause = phy->asym_pause = 0;
 350
 351         /* Take PHY out of isolate mode and reset it. */
 352         if (mii_reset_phy(phy))
 353                 return -ENODEV;
 354
 355         /* Read ID and find matching entry */
 356         id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
 357         if (id < 0)
 358                 return -ENODEV;
 359         for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
 360                 if ((id & def->phy_id_mask) == def->phy_id)
 361                         break;
 362         /* Should never be NULL (we have a generic entry), but... */
 363         if (!def)
 364                 return -ENODEV;
 365
 366         phy->def = def;
 367
 368         /* Determine PHY features if needed */
 369         phy->features = def->features;
 370         if (!phy->features) {
 371                 u16 bmsr = phy_read(phy, MII_BMSR);
 372                 if (bmsr & BMSR_ANEGCAPABLE)
 373                         phy->features |= SUPPORTED_Autoneg;
 374                 if (bmsr & BMSR_10HALF)
 375                         phy->features |= SUPPORTED_10baseT_Half;
 376                 if (bmsr & BMSR_10FULL)
 377                         phy->features |= SUPPORTED_10baseT_Full;
 378                 if (bmsr & BMSR_100HALF)
 379                         phy->features |= SUPPORTED_100baseT_Half;
 380                 if (bmsr & BMSR_100FULL)
 381                         phy->features |= SUPPORTED_100baseT_Full;
 382                 if (bmsr & BMSR_ESTATEN) {
 383                         u16 esr = phy_read(phy, MII_ESTATUS);
 384                         if (esr & ESTATUS_1000_TFULL)
 385                                 phy->features |= SUPPORTED_1000baseT_Full;
 386                         if (esr & ESTATUS_1000_THALF)
 387                                 phy->features |= SUPPORTED_1000baseT_Half;
 388                 }
 389                 phy->features |= SUPPORTED_MII;
 390         }
 391
 392         /* Setup default advertising */
 393         phy->advertising = phy->features;
 394
 395         return 0;
 396 }
 397
 398 MODULE_LICENSE("GPL");