move mm_struct and vm_area_struct
[linux-2.6] / net / mac80211 / ieee80211.c
1 /*
2  * Copyright 2002-2005, Instant802 Networks, Inc.
3  * Copyright 2005-2006, Devicescape Software, Inc.
4  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10
11 #include <net/mac80211.h>
12 #include <net/ieee80211_radiotap.h>
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/netdevice.h>
16 #include <linux/types.h>
17 #include <linux/slab.h>
18 #include <linux/skbuff.h>
19 #include <linux/etherdevice.h>
20 #include <linux/if_arp.h>
21 #include <linux/wireless.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/bitmap.h>
24 #include <net/net_namespace.h>
25 #include <net/cfg80211.h>
26
27 #include "ieee80211_i.h"
28 #include "ieee80211_rate.h"
29 #include "wep.h"
30 #include "wme.h"
31 #include "aes_ccm.h"
32 #include "ieee80211_led.h"
33 #include "cfg.h"
34 #include "debugfs.h"
35 #include "debugfs_netdev.h"
36
37 /*
38  * For seeing transmitted packets on monitor interfaces
39  * we have a radiotap header too.
40  */
41 struct ieee80211_tx_status_rtap_hdr {
42         struct ieee80211_radiotap_header hdr;
43         __le16 tx_flags;
44         u8 data_retries;
45 } __attribute__ ((packed));
46
47 /* common interface routines */
48
49 static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
50 {
51         memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
52         return ETH_ALEN;
53 }
54
55 /* must be called under mdev tx lock */
56 static void ieee80211_configure_filter(struct ieee80211_local *local)
57 {
58         unsigned int changed_flags;
59         unsigned int new_flags = 0;
60
61         if (atomic_read(&local->iff_promiscs))
62                 new_flags |= FIF_PROMISC_IN_BSS;
63
64         if (atomic_read(&local->iff_allmultis))
65                 new_flags |= FIF_ALLMULTI;
66
67         if (local->monitors)
68                 new_flags |= FIF_CONTROL |
69                              FIF_OTHER_BSS |
70                              FIF_BCN_PRBRESP_PROMISC;
71
72         changed_flags = local->filter_flags ^ new_flags;
73
74         /* be a bit nasty */
75         new_flags |= (1<<31);
76
77         local->ops->configure_filter(local_to_hw(local),
78                                      changed_flags, &new_flags,
79                                      local->mdev->mc_count,
80                                      local->mdev->mc_list);
81
82         WARN_ON(new_flags & (1<<31));
83
84         local->filter_flags = new_flags & ~(1<<31);
85 }
86
87 /* master interface */
88
89 static int ieee80211_master_open(struct net_device *dev)
90 {
91         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
92         struct ieee80211_sub_if_data *sdata;
93         int res = -EOPNOTSUPP;
94
95         /* we hold the RTNL here so can safely walk the list */
96         list_for_each_entry(sdata, &local->interfaces, list) {
97                 if (sdata->dev != dev && netif_running(sdata->dev)) {
98                         res = 0;
99                         break;
100                 }
101         }
102         return res;
103 }
104
105 static int ieee80211_master_stop(struct net_device *dev)
106 {
107         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
108         struct ieee80211_sub_if_data *sdata;
109
110         /* we hold the RTNL here so can safely walk the list */
111         list_for_each_entry(sdata, &local->interfaces, list)
112                 if (sdata->dev != dev && netif_running(sdata->dev))
113                         dev_close(sdata->dev);
114
115         return 0;
116 }
117
118 static void ieee80211_master_set_multicast_list(struct net_device *dev)
119 {
120         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
121
122         ieee80211_configure_filter(local);
123 }
124
125 /* regular interfaces */
126
127 static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
128 {
129         /* FIX: what would be proper limits for MTU?
130          * This interface uses 802.3 frames. */
131         if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6) {
132                 printk(KERN_WARNING "%s: invalid MTU %d\n",
133                        dev->name, new_mtu);
134                 return -EINVAL;
135         }
136
137 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
138         printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
139 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
140         dev->mtu = new_mtu;
141         return 0;
142 }
143
144 static inline int identical_mac_addr_allowed(int type1, int type2)
145 {
146         return (type1 == IEEE80211_IF_TYPE_MNTR ||
147                 type2 == IEEE80211_IF_TYPE_MNTR ||
148                 (type1 == IEEE80211_IF_TYPE_AP &&
149                  type2 == IEEE80211_IF_TYPE_WDS) ||
150                 (type1 == IEEE80211_IF_TYPE_WDS &&
151                  (type2 == IEEE80211_IF_TYPE_WDS ||
152                   type2 == IEEE80211_IF_TYPE_AP)) ||
153                 (type1 == IEEE80211_IF_TYPE_AP &&
154                  type2 == IEEE80211_IF_TYPE_VLAN) ||
155                 (type1 == IEEE80211_IF_TYPE_VLAN &&
156                  (type2 == IEEE80211_IF_TYPE_AP ||
157                   type2 == IEEE80211_IF_TYPE_VLAN)));
158 }
159
160 static int ieee80211_open(struct net_device *dev)
161 {
162         struct ieee80211_sub_if_data *sdata, *nsdata;
163         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
164         struct ieee80211_if_init_conf conf;
165         int res;
166
167         sdata = IEEE80211_DEV_TO_SUB_IF(dev);
168
169         /* we hold the RTNL here so can safely walk the list */
170         list_for_each_entry(nsdata, &local->interfaces, list) {
171                 struct net_device *ndev = nsdata->dev;
172
173                 if (ndev != dev && ndev != local->mdev && netif_running(ndev) &&
174                     compare_ether_addr(dev->dev_addr, ndev->dev_addr) == 0) {
175                         /*
176                          * check whether it may have the same address
177                          */
178                         if (!identical_mac_addr_allowed(sdata->type,
179                                                         nsdata->type))
180                                 return -ENOTUNIQ;
181
182                         /*
183                          * can only add VLANs to enabled APs
184                          */
185                         if (sdata->type == IEEE80211_IF_TYPE_VLAN &&
186                             nsdata->type == IEEE80211_IF_TYPE_AP &&
187                             netif_running(nsdata->dev))
188                                 sdata->u.vlan.ap = nsdata;
189                 }
190         }
191
192         switch (sdata->type) {
193         case IEEE80211_IF_TYPE_WDS:
194                 if (is_zero_ether_addr(sdata->u.wds.remote_addr))
195                         return -ENOLINK;
196                 break;
197         case IEEE80211_IF_TYPE_VLAN:
198                 if (!sdata->u.vlan.ap)
199                         return -ENOLINK;
200                 break;
201         case IEEE80211_IF_TYPE_AP:
202         case IEEE80211_IF_TYPE_STA:
203         case IEEE80211_IF_TYPE_MNTR:
204         case IEEE80211_IF_TYPE_IBSS:
205                 /* no special treatment */
206                 break;
207         case IEEE80211_IF_TYPE_INVALID:
208                 /* cannot happen */
209                 WARN_ON(1);
210                 break;
211         }
212
213         if (local->open_count == 0) {
214                 res = 0;
215                 if (local->ops->start)
216                         res = local->ops->start(local_to_hw(local));
217                 if (res)
218                         return res;
219         }
220
221         switch (sdata->type) {
222         case IEEE80211_IF_TYPE_VLAN:
223                 list_add(&sdata->u.vlan.list, &sdata->u.vlan.ap->u.ap.vlans);
224                 /* no need to tell driver */
225                 break;
226         case IEEE80211_IF_TYPE_MNTR:
227                 /* must be before the call to ieee80211_configure_filter */
228                 local->monitors++;
229                 if (local->monitors == 1) {
230                         netif_tx_lock_bh(local->mdev);
231                         ieee80211_configure_filter(local);
232                         netif_tx_unlock_bh(local->mdev);
233
234                         local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
235                         ieee80211_hw_config(local);
236                 }
237                 break;
238         case IEEE80211_IF_TYPE_STA:
239         case IEEE80211_IF_TYPE_IBSS:
240                 sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
241                 /* fall through */
242         default:
243                 conf.if_id = dev->ifindex;
244                 conf.type = sdata->type;
245                 conf.mac_addr = dev->dev_addr;
246                 res = local->ops->add_interface(local_to_hw(local), &conf);
247                 if (res && !local->open_count && local->ops->stop)
248                         local->ops->stop(local_to_hw(local));
249                 if (res)
250                         return res;
251
252                 ieee80211_if_config(dev);
253                 ieee80211_reset_erp_info(dev);
254                 ieee80211_enable_keys(sdata);
255
256                 if (sdata->type == IEEE80211_IF_TYPE_STA &&
257                     !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
258                         netif_carrier_off(dev);
259                 else
260                         netif_carrier_on(dev);
261         }
262
263         if (local->open_count == 0) {
264                 res = dev_open(local->mdev);
265                 WARN_ON(res);
266                 tasklet_enable(&local->tx_pending_tasklet);
267                 tasklet_enable(&local->tasklet);
268         }
269
270         local->open_count++;
271
272         netif_start_queue(dev);
273
274         return 0;
275 }
276
277 static int ieee80211_stop(struct net_device *dev)
278 {
279         struct ieee80211_sub_if_data *sdata;
280         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
281         struct ieee80211_if_init_conf conf;
282
283         sdata = IEEE80211_DEV_TO_SUB_IF(dev);
284
285         netif_stop_queue(dev);
286
287         dev_mc_unsync(local->mdev, dev);
288
289         /* down all dependent devices, that is VLANs */
290         if (sdata->type == IEEE80211_IF_TYPE_AP) {
291                 struct ieee80211_sub_if_data *vlan, *tmp;
292
293                 list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
294                                          u.vlan.list)
295                         dev_close(vlan->dev);
296                 WARN_ON(!list_empty(&sdata->u.ap.vlans));
297         }
298
299         local->open_count--;
300
301         switch (sdata->type) {
302         case IEEE80211_IF_TYPE_VLAN:
303                 list_del(&sdata->u.vlan.list);
304                 sdata->u.vlan.ap = NULL;
305                 /* no need to tell driver */
306                 break;
307         case IEEE80211_IF_TYPE_MNTR:
308                 local->monitors--;
309                 if (local->monitors == 0) {
310                         netif_tx_lock_bh(local->mdev);
311                         ieee80211_configure_filter(local);
312                         netif_tx_unlock_bh(local->mdev);
313
314                         local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
315                         ieee80211_hw_config(local);
316                 }
317                 break;
318         case IEEE80211_IF_TYPE_STA:
319         case IEEE80211_IF_TYPE_IBSS:
320                 sdata->u.sta.state = IEEE80211_DISABLED;
321                 del_timer_sync(&sdata->u.sta.timer);
322                 /*
323                  * When we get here, the interface is marked down.
324                  * Call synchronize_rcu() to wait for the RX path
325                  * should it be using the interface and enqueuing
326                  * frames at this very time on another CPU.
327                  */
328                 synchronize_rcu();
329                 skb_queue_purge(&sdata->u.sta.skb_queue);
330
331                 if (!local->ops->hw_scan &&
332                     local->scan_dev == sdata->dev) {
333                         local->sta_scanning = 0;
334                         cancel_delayed_work(&local->scan_work);
335                 }
336                 flush_workqueue(local->hw.workqueue);
337                 /* fall through */
338         default:
339                 conf.if_id = dev->ifindex;
340                 conf.type = sdata->type;
341                 conf.mac_addr = dev->dev_addr;
342                 /* disable all keys for as long as this netdev is down */
343                 ieee80211_disable_keys(sdata);
344                 local->ops->remove_interface(local_to_hw(local), &conf);
345         }
346
347         if (local->open_count == 0) {
348                 if (netif_running(local->mdev))
349                         dev_close(local->mdev);
350
351                 if (local->ops->stop)
352                         local->ops->stop(local_to_hw(local));
353
354                 tasklet_disable(&local->tx_pending_tasklet);
355                 tasklet_disable(&local->tasklet);
356         }
357
358         return 0;
359 }
360
361 static void ieee80211_set_multicast_list(struct net_device *dev)
362 {
363         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
364         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
365         int allmulti, promisc, sdata_allmulti, sdata_promisc;
366
367         allmulti = !!(dev->flags & IFF_ALLMULTI);
368         promisc = !!(dev->flags & IFF_PROMISC);
369         sdata_allmulti = sdata->flags & IEEE80211_SDATA_ALLMULTI;
370         sdata_promisc = sdata->flags & IEEE80211_SDATA_PROMISC;
371
372         if (allmulti != sdata_allmulti) {
373                 if (dev->flags & IFF_ALLMULTI)
374                         atomic_inc(&local->iff_allmultis);
375                 else
376                         atomic_dec(&local->iff_allmultis);
377                 sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
378         }
379
380         if (promisc != sdata_promisc) {
381                 if (dev->flags & IFF_PROMISC)
382                         atomic_inc(&local->iff_promiscs);
383                 else
384                         atomic_dec(&local->iff_promiscs);
385                 sdata->flags ^= IEEE80211_SDATA_PROMISC;
386         }
387
388         dev_mc_sync(local->mdev, dev);
389 }
390
391 static const struct header_ops ieee80211_header_ops = {
392         .create         = eth_header,
393         .parse          = header_parse_80211,
394         .rebuild        = eth_rebuild_header,
395         .cache          = eth_header_cache,
396         .cache_update   = eth_header_cache_update,
397 };
398
399 /* Must not be called for mdev */
400 void ieee80211_if_setup(struct net_device *dev)
401 {
402         ether_setup(dev);
403         dev->header_ops = &ieee80211_header_ops;
404         dev->hard_start_xmit = ieee80211_subif_start_xmit;
405         dev->wireless_handlers = &ieee80211_iw_handler_def;
406         dev->set_multicast_list = ieee80211_set_multicast_list;
407         dev->change_mtu = ieee80211_change_mtu;
408         dev->open = ieee80211_open;
409         dev->stop = ieee80211_stop;
410         dev->destructor = ieee80211_if_free;
411 }
412
413 /* WDS specialties */
414
415 int ieee80211_if_update_wds(struct net_device *dev, u8 *remote_addr)
416 {
417         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
418         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
419         struct sta_info *sta;
420         DECLARE_MAC_BUF(mac);
421
422         if (compare_ether_addr(remote_addr, sdata->u.wds.remote_addr) == 0)
423                 return 0;
424
425         /* Create STA entry for the new peer */
426         sta = sta_info_add(local, dev, remote_addr, GFP_KERNEL);
427         if (!sta)
428                 return -ENOMEM;
429         sta_info_put(sta);
430
431         /* Remove STA entry for the old peer */
432         sta = sta_info_get(local, sdata->u.wds.remote_addr);
433         if (sta) {
434                 sta_info_free(sta);
435                 sta_info_put(sta);
436         } else {
437                 printk(KERN_DEBUG "%s: could not find STA entry for WDS link "
438                        "peer %s\n",
439                        dev->name, print_mac(mac, sdata->u.wds.remote_addr));
440         }
441
442         /* Update WDS link data */
443         memcpy(&sdata->u.wds.remote_addr, remote_addr, ETH_ALEN);
444
445         return 0;
446 }
447
448 /* everything else */
449
450 static int __ieee80211_if_config(struct net_device *dev,
451                                  struct sk_buff *beacon,
452                                  struct ieee80211_tx_control *control)
453 {
454         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
455         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
456         struct ieee80211_if_conf conf;
457
458         if (!local->ops->config_interface || !netif_running(dev))
459                 return 0;
460
461         memset(&conf, 0, sizeof(conf));
462         conf.type = sdata->type;
463         if (sdata->type == IEEE80211_IF_TYPE_STA ||
464             sdata->type == IEEE80211_IF_TYPE_IBSS) {
465                 conf.bssid = sdata->u.sta.bssid;
466                 conf.ssid = sdata->u.sta.ssid;
467                 conf.ssid_len = sdata->u.sta.ssid_len;
468         } else if (sdata->type == IEEE80211_IF_TYPE_AP) {
469                 conf.ssid = sdata->u.ap.ssid;
470                 conf.ssid_len = sdata->u.ap.ssid_len;
471                 conf.beacon = beacon;
472                 conf.beacon_control = control;
473         }
474         return local->ops->config_interface(local_to_hw(local),
475                                            dev->ifindex, &conf);
476 }
477
478 int ieee80211_if_config(struct net_device *dev)
479 {
480         return __ieee80211_if_config(dev, NULL, NULL);
481 }
482
483 int ieee80211_if_config_beacon(struct net_device *dev)
484 {
485         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
486         struct ieee80211_tx_control control;
487         struct sk_buff *skb;
488
489         if (!(local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE))
490                 return 0;
491         skb = ieee80211_beacon_get(local_to_hw(local), dev->ifindex, &control);
492         if (!skb)
493                 return -ENOMEM;
494         return __ieee80211_if_config(dev, skb, &control);
495 }
496
497 int ieee80211_hw_config(struct ieee80211_local *local)
498 {
499         struct ieee80211_hw_mode *mode;
500         struct ieee80211_channel *chan;
501         int ret = 0;
502
503         if (local->sta_scanning) {
504                 chan = local->scan_channel;
505                 mode = local->scan_hw_mode;
506         } else {
507                 chan = local->oper_channel;
508                 mode = local->oper_hw_mode;
509         }
510
511         local->hw.conf.channel = chan->chan;
512         local->hw.conf.channel_val = chan->val;
513         if (!local->hw.conf.power_level) {
514                 local->hw.conf.power_level = chan->power_level;
515         } else {
516                 local->hw.conf.power_level = min(chan->power_level,
517                                                  local->hw.conf.power_level);
518         }
519         local->hw.conf.freq = chan->freq;
520         local->hw.conf.phymode = mode->mode;
521         local->hw.conf.antenna_max = chan->antenna_max;
522         local->hw.conf.chan = chan;
523         local->hw.conf.mode = mode;
524
525 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
526         printk(KERN_DEBUG "HW CONFIG: channel=%d freq=%d "
527                "phymode=%d\n", local->hw.conf.channel, local->hw.conf.freq,
528                local->hw.conf.phymode);
529 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
530
531         if (local->open_count)
532                 ret = local->ops->config(local_to_hw(local), &local->hw.conf);
533
534         return ret;
535 }
536
537 void ieee80211_erp_info_change_notify(struct net_device *dev, u8 changes)
538 {
539         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
540         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
541         if (local->ops->erp_ie_changed)
542                 local->ops->erp_ie_changed(local_to_hw(local), changes,
543                         !!(sdata->flags & IEEE80211_SDATA_USE_PROTECTION),
544                         !(sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE));
545 }
546
547 void ieee80211_reset_erp_info(struct net_device *dev)
548 {
549         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
550
551         sdata->flags &= ~(IEEE80211_SDATA_USE_PROTECTION |
552                         IEEE80211_SDATA_SHORT_PREAMBLE);
553         ieee80211_erp_info_change_notify(dev,
554                                          IEEE80211_ERP_CHANGE_PROTECTION |
555                                          IEEE80211_ERP_CHANGE_PREAMBLE);
556 }
557
558 void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
559                                  struct sk_buff *skb,
560                                  struct ieee80211_tx_status *status)
561 {
562         struct ieee80211_local *local = hw_to_local(hw);
563         struct ieee80211_tx_status *saved;
564         int tmp;
565
566         skb->dev = local->mdev;
567         saved = kmalloc(sizeof(struct ieee80211_tx_status), GFP_ATOMIC);
568         if (unlikely(!saved)) {
569                 if (net_ratelimit())
570                         printk(KERN_WARNING "%s: Not enough memory, "
571                                "dropping tx status", skb->dev->name);
572                 /* should be dev_kfree_skb_irq, but due to this function being
573                  * named _irqsafe instead of just _irq we can't be sure that
574                  * people won't call it from non-irq contexts */
575                 dev_kfree_skb_any(skb);
576                 return;
577         }
578         memcpy(saved, status, sizeof(struct ieee80211_tx_status));
579         /* copy pointer to saved status into skb->cb for use by tasklet */
580         memcpy(skb->cb, &saved, sizeof(saved));
581
582         skb->pkt_type = IEEE80211_TX_STATUS_MSG;
583         skb_queue_tail(status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS ?
584                        &local->skb_queue : &local->skb_queue_unreliable, skb);
585         tmp = skb_queue_len(&local->skb_queue) +
586                 skb_queue_len(&local->skb_queue_unreliable);
587         while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
588                (skb = skb_dequeue(&local->skb_queue_unreliable))) {
589                 memcpy(&saved, skb->cb, sizeof(saved));
590                 kfree(saved);
591                 dev_kfree_skb_irq(skb);
592                 tmp--;
593                 I802_DEBUG_INC(local->tx_status_drop);
594         }
595         tasklet_schedule(&local->tasklet);
596 }
597 EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
598
599 static void ieee80211_tasklet_handler(unsigned long data)
600 {
601         struct ieee80211_local *local = (struct ieee80211_local *) data;
602         struct sk_buff *skb;
603         struct ieee80211_rx_status rx_status;
604         struct ieee80211_tx_status *tx_status;
605
606         while ((skb = skb_dequeue(&local->skb_queue)) ||
607                (skb = skb_dequeue(&local->skb_queue_unreliable))) {
608                 switch (skb->pkt_type) {
609                 case IEEE80211_RX_MSG:
610                         /* status is in skb->cb */
611                         memcpy(&rx_status, skb->cb, sizeof(rx_status));
612                         /* Clear skb->type in order to not confuse kernel
613                          * netstack. */
614                         skb->pkt_type = 0;
615                         __ieee80211_rx(local_to_hw(local), skb, &rx_status);
616                         break;
617                 case IEEE80211_TX_STATUS_MSG:
618                         /* get pointer to saved status out of skb->cb */
619                         memcpy(&tx_status, skb->cb, sizeof(tx_status));
620                         skb->pkt_type = 0;
621                         ieee80211_tx_status(local_to_hw(local),
622                                             skb, tx_status);
623                         kfree(tx_status);
624                         break;
625                 default: /* should never get here! */
626                         printk(KERN_ERR "%s: Unknown message type (%d)\n",
627                                wiphy_name(local->hw.wiphy), skb->pkt_type);
628                         dev_kfree_skb(skb);
629                         break;
630                 }
631         }
632 }
633
634 /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
635  * make a prepared TX frame (one that has been given to hw) to look like brand
636  * new IEEE 802.11 frame that is ready to go through TX processing again.
637  * Also, tx_packet_data in cb is restored from tx_control. */
638 static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
639                                       struct ieee80211_key *key,
640                                       struct sk_buff *skb,
641                                       struct ieee80211_tx_control *control)
642 {
643         int hdrlen, iv_len, mic_len;
644         struct ieee80211_tx_packet_data *pkt_data;
645
646         pkt_data = (struct ieee80211_tx_packet_data *)skb->cb;
647         pkt_data->ifindex = control->ifindex;
648         pkt_data->flags = 0;
649         if (control->flags & IEEE80211_TXCTL_REQ_TX_STATUS)
650                 pkt_data->flags |= IEEE80211_TXPD_REQ_TX_STATUS;
651         if (control->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)
652                 pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT;
653         if (control->flags & IEEE80211_TXCTL_REQUEUE)
654                 pkt_data->flags |= IEEE80211_TXPD_REQUEUE;
655         pkt_data->queue = control->queue;
656
657         hdrlen = ieee80211_get_hdrlen_from_skb(skb);
658
659         if (!key)
660                 goto no_key;
661
662         switch (key->conf.alg) {
663         case ALG_WEP:
664                 iv_len = WEP_IV_LEN;
665                 mic_len = WEP_ICV_LEN;
666                 break;
667         case ALG_TKIP:
668                 iv_len = TKIP_IV_LEN;
669                 mic_len = TKIP_ICV_LEN;
670                 break;
671         case ALG_CCMP:
672                 iv_len = CCMP_HDR_LEN;
673                 mic_len = CCMP_MIC_LEN;
674                 break;
675         default:
676                 goto no_key;
677         }
678
679         if (skb->len >= mic_len &&
680             !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
681                 skb_trim(skb, skb->len - mic_len);
682         if (skb->len >= iv_len && skb->len > hdrlen) {
683                 memmove(skb->data + iv_len, skb->data, hdrlen);
684                 skb_pull(skb, iv_len);
685         }
686
687 no_key:
688         {
689                 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
690                 u16 fc = le16_to_cpu(hdr->frame_control);
691                 if ((fc & 0x8C) == 0x88) /* QoS Control Field */ {
692                         fc &= ~IEEE80211_STYPE_QOS_DATA;
693                         hdr->frame_control = cpu_to_le16(fc);
694                         memmove(skb->data + 2, skb->data, hdrlen - 2);
695                         skb_pull(skb, 2);
696                 }
697         }
698 }
699
700 void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
701                          struct ieee80211_tx_status *status)
702 {
703         struct sk_buff *skb2;
704         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
705         struct ieee80211_local *local = hw_to_local(hw);
706         u16 frag, type;
707         struct ieee80211_tx_status_rtap_hdr *rthdr;
708         struct ieee80211_sub_if_data *sdata;
709         int monitors;
710
711         if (!status) {
712                 printk(KERN_ERR
713                        "%s: ieee80211_tx_status called with NULL status\n",
714                        wiphy_name(local->hw.wiphy));
715                 dev_kfree_skb(skb);
716                 return;
717         }
718
719         if (status->excessive_retries) {
720                 struct sta_info *sta;
721                 sta = sta_info_get(local, hdr->addr1);
722                 if (sta) {
723                         if (sta->flags & WLAN_STA_PS) {
724                                 /* The STA is in power save mode, so assume
725                                  * that this TX packet failed because of that.
726                                  */
727                                 status->excessive_retries = 0;
728                                 status->flags |= IEEE80211_TX_STATUS_TX_FILTERED;
729                         }
730                         sta_info_put(sta);
731                 }
732         }
733
734         if (status->flags & IEEE80211_TX_STATUS_TX_FILTERED) {
735                 struct sta_info *sta;
736                 sta = sta_info_get(local, hdr->addr1);
737                 if (sta) {
738                         sta->tx_filtered_count++;
739
740                         /* Clear the TX filter mask for this STA when sending
741                          * the next packet. If the STA went to power save mode,
742                          * this will happen when it is waking up for the next
743                          * time. */
744                         sta->clear_dst_mask = 1;
745
746                         /* TODO: Is the WLAN_STA_PS flag always set here or is
747                          * the race between RX and TX status causing some
748                          * packets to be filtered out before 80211.o gets an
749                          * update for PS status? This seems to be the case, so
750                          * no changes are likely to be needed. */
751                         if (sta->flags & WLAN_STA_PS &&
752                             skb_queue_len(&sta->tx_filtered) <
753                             STA_MAX_TX_BUFFER) {
754                                 ieee80211_remove_tx_extra(local, sta->key,
755                                                           skb,
756                                                           &status->control);
757                                 skb_queue_tail(&sta->tx_filtered, skb);
758                         } else if (!(sta->flags & WLAN_STA_PS) &&
759                                    !(status->control.flags & IEEE80211_TXCTL_REQUEUE)) {
760                                 /* Software retry the packet once */
761                                 status->control.flags |= IEEE80211_TXCTL_REQUEUE;
762                                 ieee80211_remove_tx_extra(local, sta->key,
763                                                           skb,
764                                                           &status->control);
765                                 dev_queue_xmit(skb);
766                         } else {
767                                 if (net_ratelimit()) {
768                                         printk(KERN_DEBUG "%s: dropped TX "
769                                                "filtered frame queue_len=%d "
770                                                "PS=%d @%lu\n",
771                                                wiphy_name(local->hw.wiphy),
772                                                skb_queue_len(
773                                                        &sta->tx_filtered),
774                                                !!(sta->flags & WLAN_STA_PS),
775                                                jiffies);
776                                 }
777                                 dev_kfree_skb(skb);
778                         }
779                         sta_info_put(sta);
780                         return;
781                 }
782         } else {
783                 /* FIXME: STUPID to call this with both local and local->mdev */
784                 rate_control_tx_status(local, local->mdev, skb, status);
785         }
786
787         ieee80211_led_tx(local, 0);
788
789         /* SNMP counters
790          * Fragments are passed to low-level drivers as separate skbs, so these
791          * are actually fragments, not frames. Update frame counters only for
792          * the first fragment of the frame. */
793
794         frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
795         type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
796
797         if (status->flags & IEEE80211_TX_STATUS_ACK) {
798                 if (frag == 0) {
799                         local->dot11TransmittedFrameCount++;
800                         if (is_multicast_ether_addr(hdr->addr1))
801                                 local->dot11MulticastTransmittedFrameCount++;
802                         if (status->retry_count > 0)
803                                 local->dot11RetryCount++;
804                         if (status->retry_count > 1)
805                                 local->dot11MultipleRetryCount++;
806                 }
807
808                 /* This counter shall be incremented for an acknowledged MPDU
809                  * with an individual address in the address 1 field or an MPDU
810                  * with a multicast address in the address 1 field of type Data
811                  * or Management. */
812                 if (!is_multicast_ether_addr(hdr->addr1) ||
813                     type == IEEE80211_FTYPE_DATA ||
814                     type == IEEE80211_FTYPE_MGMT)
815                         local->dot11TransmittedFragmentCount++;
816         } else {
817                 if (frag == 0)
818                         local->dot11FailedCount++;
819         }
820
821         /* this was a transmitted frame, but now we want to reuse it */
822         skb_orphan(skb);
823
824         if (!local->monitors) {
825                 dev_kfree_skb(skb);
826                 return;
827         }
828
829         /* send frame to monitor interfaces now */
830
831         if (skb_headroom(skb) < sizeof(*rthdr)) {
832                 printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
833                 dev_kfree_skb(skb);
834                 return;
835         }
836
837         rthdr = (struct ieee80211_tx_status_rtap_hdr*)
838                                 skb_push(skb, sizeof(*rthdr));
839
840         memset(rthdr, 0, sizeof(*rthdr));
841         rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
842         rthdr->hdr.it_present =
843                 cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
844                             (1 << IEEE80211_RADIOTAP_DATA_RETRIES));
845
846         if (!(status->flags & IEEE80211_TX_STATUS_ACK) &&
847             !is_multicast_ether_addr(hdr->addr1))
848                 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
849
850         if ((status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) &&
851             (status->control.flags & IEEE80211_TXCTL_USE_CTS_PROTECT))
852                 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
853         else if (status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS)
854                 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
855
856         rthdr->data_retries = status->retry_count;
857
858         rcu_read_lock();
859         monitors = local->monitors;
860         list_for_each_entry_rcu(sdata, &local->interfaces, list) {
861                 /*
862                  * Using the monitors counter is possibly racy, but
863                  * if the value is wrong we simply either clone the skb
864                  * once too much or forget sending it to one monitor iface
865                  * The latter case isn't nice but fixing the race is much
866                  * more complicated.
867                  */
868                 if (!monitors || !skb)
869                         goto out;
870
871                 if (sdata->type == IEEE80211_IF_TYPE_MNTR) {
872                         if (!netif_running(sdata->dev))
873                                 continue;
874                         monitors--;
875                         if (monitors)
876                                 skb2 = skb_clone(skb, GFP_ATOMIC);
877                         else
878                                 skb2 = NULL;
879                         skb->dev = sdata->dev;
880                         /* XXX: is this sufficient for BPF? */
881                         skb_set_mac_header(skb, 0);
882                         skb->ip_summed = CHECKSUM_UNNECESSARY;
883                         skb->pkt_type = PACKET_OTHERHOST;
884                         skb->protocol = htons(ETH_P_802_2);
885                         memset(skb->cb, 0, sizeof(skb->cb));
886                         netif_rx(skb);
887                         skb = skb2;
888                 }
889         }
890  out:
891         rcu_read_unlock();
892         if (skb)
893                 dev_kfree_skb(skb);
894 }
895 EXPORT_SYMBOL(ieee80211_tx_status);
896
897 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
898                                         const struct ieee80211_ops *ops)
899 {
900         struct net_device *mdev;
901         struct ieee80211_local *local;
902         struct ieee80211_sub_if_data *sdata;
903         int priv_size;
904         struct wiphy *wiphy;
905
906         /* Ensure 32-byte alignment of our private data and hw private data.
907          * We use the wiphy priv data for both our ieee80211_local and for
908          * the driver's private data
909          *
910          * In memory it'll be like this:
911          *
912          * +-------------------------+
913          * | struct wiphy           |
914          * +-------------------------+
915          * | struct ieee80211_local  |
916          * +-------------------------+
917          * | driver's private data   |
918          * +-------------------------+
919          *
920          */
921         priv_size = ((sizeof(struct ieee80211_local) +
922                       NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
923                     priv_data_len;
924
925         wiphy = wiphy_new(&mac80211_config_ops, priv_size);
926
927         if (!wiphy)
928                 return NULL;
929
930         wiphy->privid = mac80211_wiphy_privid;
931
932         local = wiphy_priv(wiphy);
933         local->hw.wiphy = wiphy;
934
935         local->hw.priv = (char *)local +
936                          ((sizeof(struct ieee80211_local) +
937                            NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
938
939         BUG_ON(!ops->tx);
940         BUG_ON(!ops->start);
941         BUG_ON(!ops->stop);
942         BUG_ON(!ops->config);
943         BUG_ON(!ops->add_interface);
944         BUG_ON(!ops->remove_interface);
945         BUG_ON(!ops->configure_filter);
946         local->ops = ops;
947
948         /* for now, mdev needs sub_if_data :/ */
949         mdev = alloc_netdev(sizeof(struct ieee80211_sub_if_data),
950                             "wmaster%d", ether_setup);
951         if (!mdev) {
952                 wiphy_free(wiphy);
953                 return NULL;
954         }
955
956         sdata = IEEE80211_DEV_TO_SUB_IF(mdev);
957         mdev->ieee80211_ptr = &sdata->wdev;
958         sdata->wdev.wiphy = wiphy;
959
960         local->hw.queues = 1; /* default */
961
962         local->mdev = mdev;
963         local->rx_pre_handlers = ieee80211_rx_pre_handlers;
964         local->rx_handlers = ieee80211_rx_handlers;
965         local->tx_handlers = ieee80211_tx_handlers;
966
967         local->bridge_packets = 1;
968
969         local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
970         local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
971         local->short_retry_limit = 7;
972         local->long_retry_limit = 4;
973         local->hw.conf.radio_enabled = 1;
974
975         local->enabled_modes = ~0;
976
977         INIT_LIST_HEAD(&local->modes_list);
978
979         INIT_LIST_HEAD(&local->interfaces);
980
981         INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work);
982         ieee80211_rx_bss_list_init(mdev);
983
984         sta_info_init(local);
985
986         mdev->hard_start_xmit = ieee80211_master_start_xmit;
987         mdev->open = ieee80211_master_open;
988         mdev->stop = ieee80211_master_stop;
989         mdev->type = ARPHRD_IEEE80211;
990         mdev->header_ops = &ieee80211_header_ops;
991         mdev->set_multicast_list = ieee80211_master_set_multicast_list;
992
993         sdata->type = IEEE80211_IF_TYPE_AP;
994         sdata->dev = mdev;
995         sdata->local = local;
996         sdata->u.ap.force_unicast_rateidx = -1;
997         sdata->u.ap.max_ratectrl_rateidx = -1;
998         ieee80211_if_sdata_init(sdata);
999         /* no RCU needed since we're still during init phase */
1000         list_add_tail(&sdata->list, &local->interfaces);
1001
1002         tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
1003                      (unsigned long)local);
1004         tasklet_disable(&local->tx_pending_tasklet);
1005
1006         tasklet_init(&local->tasklet,
1007                      ieee80211_tasklet_handler,
1008                      (unsigned long) local);
1009         tasklet_disable(&local->tasklet);
1010
1011         skb_queue_head_init(&local->skb_queue);
1012         skb_queue_head_init(&local->skb_queue_unreliable);
1013
1014         return local_to_hw(local);
1015 }
1016 EXPORT_SYMBOL(ieee80211_alloc_hw);
1017
1018 int ieee80211_register_hw(struct ieee80211_hw *hw)
1019 {
1020         struct ieee80211_local *local = hw_to_local(hw);
1021         const char *name;
1022         int result;
1023
1024         result = wiphy_register(local->hw.wiphy);
1025         if (result < 0)
1026                 return result;
1027
1028         name = wiphy_dev(local->hw.wiphy)->driver->name;
1029         local->hw.workqueue = create_singlethread_workqueue(name);
1030         if (!local->hw.workqueue) {
1031                 result = -ENOMEM;
1032                 goto fail_workqueue;
1033         }
1034
1035         /*
1036          * The hardware needs headroom for sending the frame,
1037          * and we need some headroom for passing the frame to monitor
1038          * interfaces, but never both at the same time.
1039          */
1040         local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
1041                                    sizeof(struct ieee80211_tx_status_rtap_hdr));
1042
1043         debugfs_hw_add(local);
1044
1045         local->hw.conf.beacon_int = 1000;
1046
1047         local->wstats_flags |= local->hw.max_rssi ?
1048                                IW_QUAL_LEVEL_UPDATED : IW_QUAL_LEVEL_INVALID;
1049         local->wstats_flags |= local->hw.max_signal ?
1050                                IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
1051         local->wstats_flags |= local->hw.max_noise ?
1052                                IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID;
1053         if (local->hw.max_rssi < 0 || local->hw.max_noise < 0)
1054                 local->wstats_flags |= IW_QUAL_DBM;
1055
1056         result = sta_info_start(local);
1057         if (result < 0)
1058                 goto fail_sta_info;
1059
1060         rtnl_lock();
1061         result = dev_alloc_name(local->mdev, local->mdev->name);
1062         if (result < 0)
1063                 goto fail_dev;
1064
1065         memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
1066         SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
1067
1068         result = register_netdevice(local->mdev);
1069         if (result < 0)
1070                 goto fail_dev;
1071
1072         ieee80211_debugfs_add_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
1073         ieee80211_if_set_type(local->mdev, IEEE80211_IF_TYPE_AP);
1074
1075         result = ieee80211_init_rate_ctrl_alg(local, NULL);
1076         if (result < 0) {
1077                 printk(KERN_DEBUG "%s: Failed to initialize rate control "
1078                        "algorithm\n", wiphy_name(local->hw.wiphy));
1079                 goto fail_rate;
1080         }
1081
1082         result = ieee80211_wep_init(local);
1083
1084         if (result < 0) {
1085                 printk(KERN_DEBUG "%s: Failed to initialize wep\n",
1086                        wiphy_name(local->hw.wiphy));
1087                 goto fail_wep;
1088         }
1089
1090         ieee80211_install_qdisc(local->mdev);
1091
1092         /* add one default STA interface */
1093         result = ieee80211_if_add(local->mdev, "wlan%d", NULL,
1094                                   IEEE80211_IF_TYPE_STA);
1095         if (result)
1096                 printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
1097                        wiphy_name(local->hw.wiphy));
1098
1099         local->reg_state = IEEE80211_DEV_REGISTERED;
1100         rtnl_unlock();
1101
1102         ieee80211_led_init(local);
1103
1104         return 0;
1105
1106 fail_wep:
1107         rate_control_deinitialize(local);
1108 fail_rate:
1109         ieee80211_debugfs_remove_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
1110         unregister_netdevice(local->mdev);
1111 fail_dev:
1112         rtnl_unlock();
1113         sta_info_stop(local);
1114 fail_sta_info:
1115         debugfs_hw_del(local);
1116         destroy_workqueue(local->hw.workqueue);
1117 fail_workqueue:
1118         wiphy_unregister(local->hw.wiphy);
1119         return result;
1120 }
1121 EXPORT_SYMBOL(ieee80211_register_hw);
1122
1123 int ieee80211_register_hwmode(struct ieee80211_hw *hw,
1124                               struct ieee80211_hw_mode *mode)
1125 {
1126         struct ieee80211_local *local = hw_to_local(hw);
1127         struct ieee80211_rate *rate;
1128         int i;
1129
1130         INIT_LIST_HEAD(&mode->list);
1131         list_add_tail(&mode->list, &local->modes_list);
1132
1133         local->hw_modes |= (1 << mode->mode);
1134         for (i = 0; i < mode->num_rates; i++) {
1135                 rate = &(mode->rates[i]);
1136                 rate->rate_inv = CHAN_UTIL_RATE_LCM / rate->rate;
1137         }
1138         ieee80211_prepare_rates(local, mode);
1139
1140         if (!local->oper_hw_mode) {
1141                 /* Default to this mode */
1142                 local->hw.conf.phymode = mode->mode;
1143                 local->oper_hw_mode = local->scan_hw_mode = mode;
1144                 local->oper_channel = local->scan_channel = &mode->channels[0];
1145                 local->hw.conf.mode = local->oper_hw_mode;
1146                 local->hw.conf.chan = local->oper_channel;
1147         }
1148
1149         if (!(hw->flags & IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED))
1150                 ieee80211_set_default_regdomain(mode);
1151
1152         return 0;
1153 }
1154 EXPORT_SYMBOL(ieee80211_register_hwmode);
1155
1156 void ieee80211_unregister_hw(struct ieee80211_hw *hw)
1157 {
1158         struct ieee80211_local *local = hw_to_local(hw);
1159         struct ieee80211_sub_if_data *sdata, *tmp;
1160         int i;
1161
1162         tasklet_kill(&local->tx_pending_tasklet);
1163         tasklet_kill(&local->tasklet);
1164
1165         rtnl_lock();
1166
1167         BUG_ON(local->reg_state != IEEE80211_DEV_REGISTERED);
1168
1169         local->reg_state = IEEE80211_DEV_UNREGISTERED;
1170
1171         /*
1172          * At this point, interface list manipulations are fine
1173          * because the driver cannot be handing us frames any
1174          * more and the tasklet is killed.
1175          */
1176
1177         /*
1178          * First, we remove all non-master interfaces. Do this because they
1179          * may have bss pointer dependency on the master, and when we free
1180          * the master these would be freed as well, breaking our list
1181          * iteration completely.
1182          */
1183         list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
1184                 if (sdata->dev == local->mdev)
1185                         continue;
1186                 list_del(&sdata->list);
1187                 __ieee80211_if_del(local, sdata);
1188         }
1189
1190         /* then, finally, remove the master interface */
1191         __ieee80211_if_del(local, IEEE80211_DEV_TO_SUB_IF(local->mdev));
1192
1193         rtnl_unlock();
1194
1195         ieee80211_rx_bss_list_deinit(local->mdev);
1196         ieee80211_clear_tx_pending(local);
1197         sta_info_stop(local);
1198         rate_control_deinitialize(local);
1199         debugfs_hw_del(local);
1200
1201         for (i = 0; i < NUM_IEEE80211_MODES; i++) {
1202                 kfree(local->supp_rates[i]);
1203                 kfree(local->basic_rates[i]);
1204         }
1205
1206         if (skb_queue_len(&local->skb_queue)
1207                         || skb_queue_len(&local->skb_queue_unreliable))
1208                 printk(KERN_WARNING "%s: skb_queue not empty\n",
1209                        wiphy_name(local->hw.wiphy));
1210         skb_queue_purge(&local->skb_queue);
1211         skb_queue_purge(&local->skb_queue_unreliable);
1212
1213         destroy_workqueue(local->hw.workqueue);
1214         wiphy_unregister(local->hw.wiphy);
1215         ieee80211_wep_free(local);
1216         ieee80211_led_exit(local);
1217 }
1218 EXPORT_SYMBOL(ieee80211_unregister_hw);
1219
1220 void ieee80211_free_hw(struct ieee80211_hw *hw)
1221 {
1222         struct ieee80211_local *local = hw_to_local(hw);
1223
1224         ieee80211_if_free(local->mdev);
1225         wiphy_free(local->hw.wiphy);
1226 }
1227 EXPORT_SYMBOL(ieee80211_free_hw);
1228
1229 static int __init ieee80211_init(void)
1230 {
1231         struct sk_buff *skb;
1232         int ret;
1233
1234         BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));
1235
1236         ret = ieee80211_wme_register();
1237         if (ret) {
1238                 printk(KERN_DEBUG "ieee80211_init: failed to "
1239                        "initialize WME (err=%d)\n", ret);
1240                 return ret;
1241         }
1242
1243         ieee80211_debugfs_netdev_init();
1244         ieee80211_regdomain_init();
1245
1246         return 0;
1247 }
1248
1249 static void __exit ieee80211_exit(void)
1250 {
1251         ieee80211_wme_unregister();
1252         ieee80211_debugfs_netdev_exit();
1253 }
1254
1255
1256 subsys_initcall(ieee80211_init);
1257 module_exit(ieee80211_exit);
1258
1259 MODULE_DESCRIPTION("IEEE 802.11 subsystem");
1260 MODULE_LICENSE("GPL");