git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/iwlwifi/iwl-4965.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  * James P. Ketrenos <ipw2100-admin@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/pci.h>
  31 #include <linux/dma-mapping.h>
  32 #include <linux/delay.h>
  33 #include <linux/skbuff.h>
  34 #include <linux/netdevice.h>
  35 #include <linux/wireless.h>
  36 #include <net/mac80211.h>
  37 #include <linux/etherdevice.h>
  38 #include <asm/unaligned.h>
  39
  40 #include "iwl-eeprom.h"
  41 #include "iwl-dev.h"
  42 #include "iwl-core.h"
  43 #include "iwl-io.h"
  44 #include "iwl-helpers.h"
  45 #include "iwl-calib.h"
  46 #include "iwl-sta.h"
  47
  48 static int iwl4965_send_tx_power(struct iwl_priv *priv);
  49 static int iwl4965_hw_get_temperature(const struct iwl_priv *priv);
  50
  51 /* Change firmware file name, using "-" and incrementing number,
  52  *   *only* when uCode interface or architecture changes so that it
  53  *   is not compatible with earlier drivers.
  54  * This number will also appear in << 8 position of 1st dword of uCode file */
  55 #define IWL4965_UCODE_API "-2"
  56
  57
  58 /* module parameters */
  59 static struct iwl_mod_params iwl4965_mod_params = {
  60         .num_of_queues = IWL49_NUM_QUEUES,
  61         .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
  62         .enable_qos = 1,
  63         .amsdu_size_8K = 1,
  64         .restart_fw = 1,
  65         /* the rest are 0 by default */
  66 };
  67
  68 /* check contents of special bootstrap uCode SRAM */
  69 static int iwl4965_verify_bsm(struct iwl_priv *priv)
  70 {
  71         __le32 *image = priv->ucode_boot.v_addr;
  72         u32 len = priv->ucode_boot.len;
  73         u32 reg;
  74         u32 val;
  75
  76         IWL_DEBUG_INFO("Begin verify bsm\n");
  77
  78         /* verify BSM SRAM contents */
  79         val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
  80         for (reg = BSM_SRAM_LOWER_BOUND;
  81              reg < BSM_SRAM_LOWER_BOUND + len;
  82              reg += sizeof(u32), image++) {
  83                 val = iwl_read_prph(priv, reg);
  84                 if (val != le32_to_cpu(*image)) {
  85                         IWL_ERROR("BSM uCode verification failed at "
  86                                   "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
  87                                   BSM_SRAM_LOWER_BOUND,
  88                                   reg - BSM_SRAM_LOWER_BOUND, len,
  89                                   val, le32_to_cpu(*image));
  90                         return -EIO;
  91                 }
  92         }
  93
  94         IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
  95
  96         return 0;
  97 }
  98
  99 /**
 100  * iwl4965_load_bsm - Load bootstrap instructions
 101  *
 102  * BSM operation:
 103  *
 104  * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
 105  * in special SRAM that does not power down during RFKILL.  When powering back
 106  * up after power-saving sleeps (or during initial uCode load), the BSM loads
 107  * the bootstrap program into the on-board processor, and starts it.
 108  *
 109  * The bootstrap program loads (via DMA) instructions and data for a new
 110  * program from host DRAM locations indicated by the host driver in the
 111  * BSM_DRAM_* registers.  Once the new program is loaded, it starts
 112  * automatically.
 113  *
 114  * When initializing the NIC, the host driver points the BSM to the
 115  * "initialize" uCode image.  This uCode sets up some internal data, then
 116  * notifies host via "initialize alive" that it is complete.
 117  *
 118  * The host then replaces the BSM_DRAM_* pointer values to point to the
 119  * normal runtime uCode instructions and a backup uCode data cache buffer
 120  * (filled initially with starting data values for the on-board processor),
 121  * then triggers the "initialize" uCode to load and launch the runtime uCode,
 122  * which begins normal operation.
 123  *
 124  * When doing a power-save shutdown, runtime uCode saves data SRAM into
 125  * the backup data cache in DRAM before SRAM is powered down.
 126  *
 127  * When powering back up, the BSM loads the bootstrap program.  This reloads
 128  * the runtime uCode instructions and the backup data cache into SRAM,
 129  * and re-launches the runtime uCode from where it left off.
 130  */
 131 static int iwl4965_load_bsm(struct iwl_priv *priv)
 132 {
 133         __le32 *image = priv->ucode_boot.v_addr;
 134         u32 len = priv->ucode_boot.len;
 135         dma_addr_t pinst;
 136         dma_addr_t pdata;
 137         u32 inst_len;
 138         u32 data_len;
 139         int i;
 140         u32 done;
 141         u32 reg_offset;
 142         int ret;
 143
 144         IWL_DEBUG_INFO("Begin load bsm\n");
 145
 146         priv->ucode_type = UCODE_RT;
 147
 148         /* make sure bootstrap program is no larger than BSM's SRAM size */
 149         if (len > IWL_MAX_BSM_SIZE)
 150                 return -EINVAL;
 151
 152         /* Tell bootstrap uCode where to find the "Initialize" uCode
 153          *   in host DRAM ... host DRAM physical address bits 35:4 for 4965.
 154          * NOTE:  iwl_init_alive_start() will replace these values,
 155          *        after the "initialize" uCode has run, to point to
 156          *        runtime/protocol instructions and backup data cache.
 157          */
 158         pinst = priv->ucode_init.p_addr >> 4;
 159         pdata = priv->ucode_init_data.p_addr >> 4;
 160         inst_len = priv->ucode_init.len;
 161         data_len = priv->ucode_init_data.len;
 162
 163         ret = iwl_grab_nic_access(priv);
 164         if (ret)
 165                 return ret;
 166
 167         iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 168         iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
 169         iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
 170         iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
 171
 172         /* Fill BSM memory with bootstrap instructions */
 173         for (reg_offset = BSM_SRAM_LOWER_BOUND;
 174              reg_offset < BSM_SRAM_LOWER_BOUND + len;
 175              reg_offset += sizeof(u32), image++)
 176                 _iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
 177
 178         ret = iwl4965_verify_bsm(priv);
 179         if (ret) {
 180                 iwl_release_nic_access(priv);
 181                 return ret;
 182         }
 183
 184         /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
 185         iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
 186         iwl_write_prph(priv, BSM_WR_MEM_DST_REG, RTC_INST_LOWER_BOUND);
 187         iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
 188
 189         /* Load bootstrap code into instruction SRAM now,
 190          *   to prepare to load "initialize" uCode */
 191         iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
 192
 193         /* Wait for load of bootstrap uCode to finish */
 194         for (i = 0; i < 100; i++) {
 195                 done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
 196                 if (!(done & BSM_WR_CTRL_REG_BIT_START))
 197                         break;
 198                 udelay(10);
 199         }
 200         if (i < 100)
 201                 IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
 202         else {
 203                 IWL_ERROR("BSM write did not complete!\n");
 204                 return -EIO;
 205         }
 206
 207         /* Enable future boot loads whenever power management unit triggers it
 208          *   (e.g. when powering back up after power-save shutdown) */
 209         iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
 210
 211         iwl_release_nic_access(priv);
 212
 213         return 0;
 214 }
 215
 216 /**
 217  * iwl4965_set_ucode_ptrs - Set uCode address location
 218  *
 219  * Tell initialization uCode where to find runtime uCode.
 220  *
 221  * BSM registers initially contain pointers to initialization uCode.
 222  * We need to replace them to load runtime uCode inst and data,
 223  * and to save runtime data when powering down.
 224  */
 225 static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
 226 {
 227         dma_addr_t pinst;
 228         dma_addr_t pdata;
 229         unsigned long flags;
 230         int ret = 0;
 231
 232         /* bits 35:4 for 4965 */
 233         pinst = priv->ucode_code.p_addr >> 4;
 234         pdata = priv->ucode_data_backup.p_addr >> 4;
 235
 236         spin_lock_irqsave(&priv->lock, flags);
 237         ret = iwl_grab_nic_access(priv);
 238         if (ret) {
 239                 spin_unlock_irqrestore(&priv->lock, flags);
 240                 return ret;
 241         }
 242
 243         /* Tell bootstrap uCode where to find image to load */
 244         iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 245         iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
 246         iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
 247                                  priv->ucode_data.len);
 248
 249         /* Inst bytecount must be last to set up, bit 31 signals uCode
 250          *   that all new ptr/size info is in place */
 251         iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
 252                                  priv->ucode_code.len | BSM_DRAM_INST_LOAD);
 253         iwl_release_nic_access(priv);
 254
 255         spin_unlock_irqrestore(&priv->lock, flags);
 256
 257         IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
 258
 259         return ret;
 260 }
 261
 262 /**
 263  * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received
 264  *
 265  * Called after REPLY_ALIVE notification received from "initialize" uCode.
 266  *
 267  * The 4965 "initialize" ALIVE reply contains calibration data for:
 268  *   Voltage, temperature, and MIMO tx gain correction, now stored in priv
 269  *   (3945 does not contain this data).
 270  *
 271  * Tell "initialize" uCode to go ahead and load the runtime uCode.
 272 */
 273 static void iwl4965_init_alive_start(struct iwl_priv *priv)
 274 {
 275         /* Check alive response for "valid" sign from uCode */
 276         if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
 277                 /* We had an error bringing up the hardware, so take it
 278                  * all the way back down so we can try again */
 279                 IWL_DEBUG_INFO("Initialize Alive failed.\n");
 280                 goto restart;
 281         }
 282
 283         /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
 284          * This is a paranoid check, because we would not have gotten the
 285          * "initialize" alive if code weren't properly loaded.  */
 286         if (iwl_verify_ucode(priv)) {
 287                 /* Runtime instruction load was bad;
 288                  * take it all the way back down so we can try again */
 289                 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
 290                 goto restart;
 291         }
 292
 293         /* Calculate temperature */
 294         priv->temperature = iwl4965_hw_get_temperature(priv);
 295
 296         /* Send pointers to protocol/runtime uCode image ... init code will
 297          * load and launch runtime uCode, which will send us another "Alive"
 298          * notification. */
 299         IWL_DEBUG_INFO("Initialization Alive received.\n");
 300         if (iwl4965_set_ucode_ptrs(priv)) {
 301                 /* Runtime instruction load won't happen;
 302                  * take it all the way back down so we can try again */
 303                 IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
 304                 goto restart;
 305         }
 306         return;
 307
 308 restart:
 309         queue_work(priv->workqueue, &priv->restart);
 310 }
 311
 312 static int is_fat_channel(__le32 rxon_flags)
 313 {
 314         return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) ||
 315                 (rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK);
 316 }
 317
 318 /*
 319  * EEPROM handlers
 320  */
 321
 322 static int iwl4965_eeprom_check_version(struct iwl_priv *priv)
 323 {
 324         u16 eeprom_ver;
 325         u16 calib_ver;
 326
 327         eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
 328
 329         calib_ver = iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET);
 330
 331         if (eeprom_ver < EEPROM_4965_EEPROM_VERSION ||
 332             calib_ver < EEPROM_4965_TX_POWER_VERSION)
 333                 goto err;
 334
 335         return 0;
 336 err:
 337         IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
 338                   eeprom_ver, EEPROM_4965_EEPROM_VERSION,
 339                   calib_ver, EEPROM_4965_TX_POWER_VERSION);
 340         return -EINVAL;
 341
 342 }
 343
 344 /*
 345  * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask
 346  * must be called under priv->lock and mac access
 347  */
 348 static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
 349 {
 350         iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
 351 }
 352
 353 static int iwl4965_apm_init(struct iwl_priv *priv)
 354 {
 355         int ret = 0;
 356
 357         iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
 358                           CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
 359
 360         /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
 361         iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
 362                           CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
 363
 364         /* set "initialization complete" bit to move adapter
 365          * D0U* --> D0A* state */
 366         iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 367
 368         /* wait for clock stabilization */
 369         ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
 370                            CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
 371                            CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 372         if (ret < 0) {
 373                 IWL_DEBUG_INFO("Failed to init the card\n");
 374                 goto out;
 375         }
 376
 377         ret = iwl_grab_nic_access(priv);
 378         if (ret)
 379                 goto out;
 380
 381         /* enable DMA */
 382         iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
 383                                                 APMG_CLK_VAL_BSM_CLK_RQT);
 384
 385         udelay(20);
 386
 387         /* disable L1-Active */
 388         iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 389                           APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 390
 391         iwl_release_nic_access(priv);
 392 out:
 393         return ret;
 394 }
 395
 396
 397 static void iwl4965_nic_config(struct iwl_priv *priv)
 398 {
 399         unsigned long flags;
 400         u32 val;
 401         u16 radio_cfg;
 402         u8 val_link;
 403
 404         spin_lock_irqsave(&priv->lock, flags);
 405
 406         if ((priv->rev_id & 0x80) == 0x80 && (priv->rev_id & 0x7f) < 8) {
 407                 pci_read_config_dword(priv->pci_dev, PCI_REG_WUM8, &val);
 408                 /* Enable No Snoop field */
 409                 pci_write_config_dword(priv->pci_dev, PCI_REG_WUM8,
 410                                        val & ~(1 << 11));
 411         }
 412
 413         pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
 414
 415         /* L1 is enabled by BIOS */
 416         if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
 417                 /* diable L0S disabled L1A enabled */
 418                 iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 419         else
 420                 /* L0S enabled L1A disabled */
 421                 iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 422
 423         radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 424
 425         /* write radio config values to register */
 426         if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
 427                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 428                             EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
 429                             EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
 430                             EEPROM_RF_CFG_DASH_MSK(radio_cfg));
 431
 432         /* set CSR_HW_CONFIG_REG for uCode use */
 433         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 434                     CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 435                     CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 436
 437         priv->calib_info = (struct iwl_eeprom_calib_info *)
 438                 iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET);
 439
 440         spin_unlock_irqrestore(&priv->lock, flags);
 441 }
 442
 443 static int iwl4965_apm_stop_master(struct iwl_priv *priv)
 444 {
 445         int ret = 0;
 446         unsigned long flags;
 447
 448         spin_lock_irqsave(&priv->lock, flags);
 449
 450         /* set stop master bit */
 451         iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
 452
 453         ret = iwl_poll_bit(priv, CSR_RESET,
 454                                   CSR_RESET_REG_FLAG_MASTER_DISABLED,
 455                                   CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
 456         if (ret < 0)
 457                 goto out;
 458
 459 out:
 460         spin_unlock_irqrestore(&priv->lock, flags);
 461         IWL_DEBUG_INFO("stop master\n");
 462
 463         return ret;
 464 }
 465
 466 static void iwl4965_apm_stop(struct iwl_priv *priv)
 467 {
 468         unsigned long flags;
 469
 470         iwl4965_apm_stop_master(priv);
 471
 472         spin_lock_irqsave(&priv->lock, flags);
 473
 474         iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 475
 476         udelay(10);
 477
 478         iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 479         spin_unlock_irqrestore(&priv->lock, flags);
 480 }
 481
 482 static int iwl4965_apm_reset(struct iwl_priv *priv)
 483 {
 484         int ret = 0;
 485         unsigned long flags;
 486
 487         iwl4965_apm_stop_master(priv);
 488
 489         spin_lock_irqsave(&priv->lock, flags);
 490
 491         iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 492
 493         udelay(10);
 494
 495         /* FIXME: put here L1A -L0S w/a */
 496
 497         iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 498
 499         ret = iwl_poll_bit(priv, CSR_RESET,
 500                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
 501                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25);
 502
 503         if (ret)
 504                 goto out;
 505
 506         udelay(10);
 507
 508         ret = iwl_grab_nic_access(priv);
 509         if (ret)
 510                 goto out;
 511         /* Enable DMA and BSM Clock */
 512         iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT |
 513                                               APMG_CLK_VAL_BSM_CLK_RQT);
 514
 515         udelay(10);
 516
 517         /* disable L1A */
 518         iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 519                           APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 520
 521         iwl_release_nic_access(priv);
 522
 523         clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 524         wake_up_interruptible(&priv->wait_command_queue);
 525
 526 out:
 527         spin_unlock_irqrestore(&priv->lock, flags);
 528
 529         return ret;
 530 }
 531
 532 /* Reset differential Rx gains in NIC to prepare for chain noise calibration.
 533  * Called after every association, but this runs only once!
 534  *  ... once chain noise is calibrated the first time, it's good forever.  */
 535 static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
 536 {
 537         struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
 538
 539         if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
 540                 struct iwl4965_calibration_cmd cmd;
 541
 542                 memset(&cmd, 0, sizeof(cmd));
 543                 cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
 544                 cmd.diff_gain_a = 0;
 545                 cmd.diff_gain_b = 0;
 546                 cmd.diff_gain_c = 0;
 547                 if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
 548                                  sizeof(cmd), &cmd))
 549                         IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n");
 550                 data->state = IWL_CHAIN_NOISE_ACCUMULATE;
 551                 IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
 552         }
 553 }
 554
 555 static void iwl4965_gain_computation(struct iwl_priv *priv,
 556                 u32 *average_noise,
 557                 u16 min_average_noise_antenna_i,
 558                 u32 min_average_noise)
 559 {
 560         int i, ret;
 561         struct iwl_chain_noise_data *data = &priv->chain_noise_data;
 562
 563         data->delta_gain_code[min_average_noise_antenna_i] = 0;
 564
 565         for (i = 0; i < NUM_RX_CHAINS; i++) {
 566                 s32 delta_g = 0;
 567
 568                 if (!(data->disconn_array[i]) &&
 569                     (data->delta_gain_code[i] ==
 570                              CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
 571                         delta_g = average_noise[i] - min_average_noise;
 572                         data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
 573                         data->delta_gain_code[i] =
 574                                 min(data->delta_gain_code[i],
 575                                 (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
 576
 577                         data->delta_gain_code[i] =
 578                                 (data->delta_gain_code[i] | (1 << 2));
 579                 } else {
 580                         data->delta_gain_code[i] = 0;
 581                 }
 582         }
 583         IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
 584                      data->delta_gain_code[0],
 585                      data->delta_gain_code[1],
 586                      data->delta_gain_code[2]);
 587
 588         /* Differential gain gets sent to uCode only once */
 589         if (!data->radio_write) {
 590                 struct iwl4965_calibration_cmd cmd;
 591                 data->radio_write = 1;
 592
 593                 memset(&cmd, 0, sizeof(cmd));
 594                 cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
 595                 cmd.diff_gain_a = data->delta_gain_code[0];
 596                 cmd.diff_gain_b = data->delta_gain_code[1];
 597                 cmd.diff_gain_c = data->delta_gain_code[2];
 598                 ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
 599                                       sizeof(cmd), &cmd);
 600                 if (ret)
 601                         IWL_DEBUG_CALIB("fail sending cmd "
 602                                      "REPLY_PHY_CALIBRATION_CMD \n");
 603
 604                 /* TODO we might want recalculate
 605                  * rx_chain in rxon cmd */
 606
 607                 /* Mark so we run this algo only once! */
 608                 data->state = IWL_CHAIN_NOISE_CALIBRATED;
 609         }
 610         data->chain_noise_a = 0;
 611         data->chain_noise_b = 0;
 612         data->chain_noise_c = 0;
 613         data->chain_signal_a = 0;
 614         data->chain_signal_b = 0;
 615         data->chain_signal_c = 0;
 616         data->beacon_count = 0;
 617 }
 618
 619 static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
 620                         __le32 *tx_flags)
 621 {
 622         if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
 623                 *tx_flags |= TX_CMD_FLG_RTS_MSK;
 624                 *tx_flags &= ~TX_CMD_FLG_CTS_MSK;
 625         } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
 626                 *tx_flags &= ~TX_CMD_FLG_RTS_MSK;
 627                 *tx_flags |= TX_CMD_FLG_CTS_MSK;
 628         }
 629 }
 630
 631 static void iwl4965_bg_txpower_work(struct work_struct *work)
 632 {
 633         struct iwl_priv *priv = container_of(work, struct iwl_priv,
 634                         txpower_work);
 635
 636         /* If a scan happened to start before we got here
 637          * then just return; the statistics notification will
 638          * kick off another scheduled work to compensate for
 639          * any temperature delta we missed here. */
 640         if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
 641             test_bit(STATUS_SCANNING, &priv->status))
 642                 return;
 643
 644         mutex_lock(&priv->mutex);
 645
 646         /* Regardless of if we are assocaited, we must reconfigure the
 647          * TX power since frames can be sent on non-radar channels while
 648          * not associated */
 649         iwl4965_send_tx_power(priv);
 650
 651         /* Update last_temperature to keep is_calib_needed from running
 652          * when it isn't needed... */
 653         priv->last_temperature = priv->temperature;
 654
 655         mutex_unlock(&priv->mutex);
 656 }
 657
 658 /*
 659  * Acquire priv->lock before calling this function !
 660  */
 661 static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index)
 662 {
 663         iwl_write_direct32(priv, HBUS_TARG_WRPTR,
 664                              (index & 0xff) | (txq_id << 8));
 665         iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
 666 }
 667
 668 /**
 669  * iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
 670  * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
 671  * @scd_retry: (1) Indicates queue will be used in aggregation mode
 672  *
 673  * NOTE:  Acquire priv->lock before calling this function !
 674  */
 675 static void iwl4965_tx_queue_set_status(struct iwl_priv *priv,
 676                                         struct iwl_tx_queue *txq,
 677                                         int tx_fifo_id, int scd_retry)
 678 {
 679         int txq_id = txq->q.id;
 680
 681         /* Find out whether to activate Tx queue */
 682         int active = test_bit(txq_id, &priv->txq_ctx_active_msk)?1:0;
 683
 684         /* Set up and activate */
 685         iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
 686                          (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
 687                          (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) |
 688                          (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) |
 689                          (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
 690                          IWL49_SCD_QUEUE_STTS_REG_MSK);
 691
 692         txq->sched_retry = scd_retry;
 693
 694         IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
 695                        active ? "Activate" : "Deactivate",
 696                        scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
 697 }
 698
 699 static const u16 default_queue_to_tx_fifo[] = {
 700         IWL_TX_FIFO_AC3,
 701         IWL_TX_FIFO_AC2,
 702         IWL_TX_FIFO_AC1,
 703         IWL_TX_FIFO_AC0,
 704         IWL49_CMD_FIFO_NUM,
 705         IWL_TX_FIFO_HCCA_1,
 706         IWL_TX_FIFO_HCCA_2
 707 };
 708
 709 static int iwl4965_alive_notify(struct iwl_priv *priv)
 710 {
 711         u32 a;
 712         int i = 0;
 713         unsigned long flags;
 714         int ret;
 715
 716         spin_lock_irqsave(&priv->lock, flags);
 717
 718         ret = iwl_grab_nic_access(priv);
 719         if (ret) {
 720                 spin_unlock_irqrestore(&priv->lock, flags);
 721                 return ret;
 722         }
 723
 724         /* Clear 4965's internal Tx Scheduler data base */
 725         priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
 726         a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
 727         for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
 728                 iwl_write_targ_mem(priv, a, 0);
 729         for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
 730                 iwl_write_targ_mem(priv, a, 0);
 731         for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
 732                 iwl_write_targ_mem(priv, a, 0);
 733
 734         /* Tel 4965 where to find Tx byte count tables */
 735         iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR,
 736                 (priv->shared_phys +
 737                  offsetof(struct iwl4965_shared, queues_byte_cnt_tbls)) >> 10);
 738
 739         /* Disable chain mode for all queues */
 740         iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0);
 741
 742         /* Initialize each Tx queue (including the command queue) */
 743         for (i = 0; i < priv->hw_params.max_txq_num; i++) {
 744
 745                 /* TFD circular buffer read/write indexes */
 746                 iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0);
 747                 iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
 748
 749                 /* Max Tx Window size for Scheduler-ACK mode */
 750                 iwl_write_targ_mem(priv, priv->scd_base_addr +
 751                                 IWL49_SCD_CONTEXT_QUEUE_OFFSET(i),
 752                                 (SCD_WIN_SIZE <<
 753                                 IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
 754                                 IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
 755
 756                 /* Frame limit */
 757                 iwl_write_targ_mem(priv, priv->scd_base_addr +
 758                                 IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
 759                                 sizeof(u32),
 760                                 (SCD_FRAME_LIMIT <<
 761                                 IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
 762                                 IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
 763
 764         }
 765         iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK,
 766                                  (1 << priv->hw_params.max_txq_num) - 1);
 767
 768         /* Activate all Tx DMA/FIFO channels */
 769         priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 7));
 770
 771         iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
 772
 773         /* Map each Tx/cmd queue to its corresponding fifo */
 774         for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
 775                 int ac = default_queue_to_tx_fifo[i];
 776                 iwl_txq_ctx_activate(priv, i);
 777                 iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
 778         }
 779
 780         iwl_release_nic_access(priv);
 781         spin_unlock_irqrestore(&priv->lock, flags);
 782
 783         return ret;
 784 }
 785
 786 static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
 787         .min_nrg_cck = 97,
 788         .max_nrg_cck = 0,
 789
 790         .auto_corr_min_ofdm = 85,
 791         .auto_corr_min_ofdm_mrc = 170,
 792         .auto_corr_min_ofdm_x1 = 105,
 793         .auto_corr_min_ofdm_mrc_x1 = 220,
 794
 795         .auto_corr_max_ofdm = 120,
 796         .auto_corr_max_ofdm_mrc = 210,
 797         .auto_corr_max_ofdm_x1 = 140,
 798         .auto_corr_max_ofdm_mrc_x1 = 270,
 799
 800         .auto_corr_min_cck = 125,
 801         .auto_corr_max_cck = 200,
 802         .auto_corr_min_cck_mrc = 200,
 803         .auto_corr_max_cck_mrc = 400,
 804
 805         .nrg_th_cck = 100,
 806         .nrg_th_ofdm = 100,
 807 };
 808
 809 /**
 810  * iwl4965_hw_set_hw_params
 811  *
 812  * Called when initializing driver
 813  */
 814 static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
 815 {
 816
 817         if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) ||
 818             (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
 819                 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
 820                           IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES);
 821                 return -EINVAL;
 822         }
 823
 824         priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
 825         priv->hw_params.first_ampdu_q = IWL49_FIRST_AMPDU_QUEUE;
 826         priv->hw_params.max_stations = IWL4965_STATION_COUNT;
 827         priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID;
 828         priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
 829         priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
 830         priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
 831         priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ);
 832
 833         priv->hw_params.tx_chains_num = 2;
 834         priv->hw_params.rx_chains_num = 2;
 835         priv->hw_params.valid_tx_ant = ANT_A | ANT_B;
 836         priv->hw_params.valid_rx_ant = ANT_A | ANT_B;
 837         priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
 838
 839         priv->hw_params.sens = &iwl4965_sensitivity;
 840
 841         return 0;
 842 }
 843
 844 static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
 845 {
 846         s32 sign = 1;
 847
 848         if (num < 0) {
 849                 sign = -sign;
 850                 num = -num;
 851         }
 852         if (denom < 0) {
 853                 sign = -sign;
 854                 denom = -denom;
 855         }
 856         *res = 1;
 857         *res = ((num * 2 + denom) / (denom * 2)) * sign;
 858
 859         return 1;
 860 }
 861
 862 /**
 863  * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower
 864  *
 865  * Determines power supply voltage compensation for txpower calculations.
 866  * Returns number of 1/2-dB steps to subtract from gain table index,
 867  * to compensate for difference between power supply voltage during
 868  * factory measurements, vs. current power supply voltage.
 869  *
 870  * Voltage indication is higher for lower voltage.
 871  * Lower voltage requires more gain (lower gain table index).
 872  */
 873 static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
 874                                             s32 current_voltage)
 875 {
 876         s32 comp = 0;
 877
 878         if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
 879             (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage))
 880                 return 0;
 881
 882         iwl4965_math_div_round(current_voltage - eeprom_voltage,
 883                                TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp);
 884
 885         if (current_voltage > eeprom_voltage)
 886                 comp *= 2;
 887         if ((comp < -2) || (comp > 2))
 888                 comp = 0;
 889
 890         return comp;
 891 }
 892
 893 static s32 iwl4965_get_tx_atten_grp(u16 channel)
 894 {
 895         if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
 896             channel <= CALIB_IWL_TX_ATTEN_GR5_LCH)
 897                 return CALIB_CH_GROUP_5;
 898
 899         if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH &&
 900             channel <= CALIB_IWL_TX_ATTEN_GR1_LCH)
 901                 return CALIB_CH_GROUP_1;
 902
 903         if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH &&
 904             channel <= CALIB_IWL_TX_ATTEN_GR2_LCH)
 905                 return CALIB_CH_GROUP_2;
 906
 907         if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH &&
 908             channel <= CALIB_IWL_TX_ATTEN_GR3_LCH)
 909                 return CALIB_CH_GROUP_3;
 910
 911         if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH &&
 912             channel <= CALIB_IWL_TX_ATTEN_GR4_LCH)
 913                 return CALIB_CH_GROUP_4;
 914
 915         IWL_ERROR("Can't find txatten group for channel %d.\n", channel);
 916         return -1;
 917 }
 918
 919 static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel)
 920 {
 921         s32 b = -1;
 922
 923         for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
 924                 if (priv->calib_info->band_info[b].ch_from == 0)
 925                         continue;
 926
 927                 if ((channel >= priv->calib_info->band_info[b].ch_from)
 928                     && (channel <= priv->calib_info->band_info[b].ch_to))
 929                         break;
 930         }
 931
 932         return b;
 933 }
 934
 935 static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
 936 {
 937         s32 val;
 938
 939         if (x2 == x1)
 940                 return y1;
 941         else {
 942                 iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
 943                 return val + y2;
 944         }
 945 }
 946
 947 /**
 948  * iwl4965_interpolate_chan - Interpolate factory measurements for one channel
 949  *
 950  * Interpolates factory measurements from the two sample channels within a
 951  * sub-band, to apply to channel of interest.  Interpolation is proportional to
 952  * differences in channel frequencies, which is proportional to differences
 953  * in channel number.
 954  */
 955 static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
 956                                     struct iwl_eeprom_calib_ch_info *chan_info)
 957 {
 958         s32 s = -1;
 959         u32 c;
 960         u32 m;
 961         const struct iwl_eeprom_calib_measure *m1;
 962         const struct iwl_eeprom_calib_measure *m2;
 963         struct iwl_eeprom_calib_measure *omeas;
 964         u32 ch_i1;
 965         u32 ch_i2;
 966
 967         s = iwl4965_get_sub_band(priv, channel);
 968         if (s >= EEPROM_TX_POWER_BANDS) {
 969                 IWL_ERROR("Tx Power can not find channel %d\n", channel);
 970                 return -1;
 971         }
 972
 973         ch_i1 = priv->calib_info->band_info[s].ch1.ch_num;
 974         ch_i2 = priv->calib_info->band_info[s].ch2.ch_num;
 975         chan_info->ch_num = (u8) channel;
 976
 977         IWL_DEBUG_TXPOWER("channel %d subband %d factory cal ch %d & %d\n",
 978                           channel, s, ch_i1, ch_i2);
 979
 980         for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
 981                 for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
 982                         m1 = &(priv->calib_info->band_info[s].ch1.
 983                                measurements[c][m]);
 984                         m2 = &(priv->calib_info->band_info[s].ch2.
 985                                measurements[c][m]);
 986                         omeas = &(chan_info->measurements[c][m]);
 987
 988                         omeas->actual_pow =
 989                             (u8) iwl4965_interpolate_value(channel, ch_i1,
 990                                                            m1->actual_pow,
 991                                                            ch_i2,
 992                                                            m2->actual_pow);
 993                         omeas->gain_idx =
 994                             (u8) iwl4965_interpolate_value(channel, ch_i1,
 995                                                            m1->gain_idx, ch_i2,
 996                                                            m2->gain_idx);
 997                         omeas->temperature =
 998                             (u8) iwl4965_interpolate_value(channel, ch_i1,
 999                                                            m1->temperature,
1000                                                            ch_i2,
1001                                                            m2->temperature);
1002                         omeas->pa_det =
1003                             (s8) iwl4965_interpolate_value(channel, ch_i1,
1004                                                            m1->pa_det, ch_i2,
1005                                                            m2->pa_det);
1006
1007                         IWL_DEBUG_TXPOWER
1008                             ("chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
1009                              m1->actual_pow, m2->actual_pow, omeas->actual_pow);
1010                         IWL_DEBUG_TXPOWER
1011                             ("chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
1012                              m1->gain_idx, m2->gain_idx, omeas->gain_idx);
1013                         IWL_DEBUG_TXPOWER
1014                             ("chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
1015                              m1->pa_det, m2->pa_det, omeas->pa_det);
1016                         IWL_DEBUG_TXPOWER
1017                             ("chain %d meas %d  T1=%d  T2=%d  T=%d\n", c, m,
1018                              m1->temperature, m2->temperature,
1019                              omeas->temperature);
1020                 }
1021         }
1022
1023         return 0;
1024 }
1025
1026 /* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
1027  * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
1028 static s32 back_off_table[] = {
1029         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
1030         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
1031         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
1032         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
1033         10                      /* CCK */
1034 };
1035
1036 /* Thermal compensation values for txpower for various frequency ranges ...
1037  *   ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
1038 static struct iwl4965_txpower_comp_entry {
1039         s32 degrees_per_05db_a;
1040         s32 degrees_per_05db_a_denom;
1041 } tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
1042         {9, 2},                 /* group 0 5.2, ch  34-43 */
1043         {4, 1},                 /* group 1 5.2, ch  44-70 */
1044         {4, 1},                 /* group 2 5.2, ch  71-124 */
1045         {4, 1},                 /* group 3 5.2, ch 125-200 */
1046         {3, 1}                  /* group 4 2.4, ch   all */
1047 };
1048
1049 static s32 get_min_power_index(s32 rate_power_index, u32 band)
1050 {
1051         if (!band) {
1052                 if ((rate_power_index & 7) <= 4)
1053                         return MIN_TX_GAIN_INDEX_52GHZ_EXT;
1054         }
1055         return MIN_TX_GAIN_INDEX;
1056 }
1057
1058 struct gain_entry {
1059         u8 dsp;
1060         u8 radio;
1061 };
1062
1063 static const struct gain_entry gain_table[2][108] = {
1064         /* 5.2GHz power gain index table */
1065         {
1066          {123, 0x3F},           /* highest txpower */
1067          {117, 0x3F},
1068          {110, 0x3F},
1069          {104, 0x3F},
1070          {98, 0x3F},
1071          {110, 0x3E},
1072          {104, 0x3E},
1073          {98, 0x3E},
1074          {110, 0x3D},
1075          {104, 0x3D},
1076          {98, 0x3D},
1077          {110, 0x3C},
1078          {104, 0x3C},
1079          {98, 0x3C},
1080          {110, 0x3B},
1081          {104, 0x3B},
1082          {98, 0x3B},
1083          {110, 0x3A},
1084          {104, 0x3A},
1085          {98, 0x3A},
1086          {110, 0x39},
1087          {104, 0x39},
1088          {98, 0x39},
1089          {110, 0x38},
1090          {104, 0x38},
1091          {98, 0x38},
1092          {110, 0x37},
1093          {104, 0x37},
1094          {98, 0x37},
1095          {110, 0x36},
1096          {104, 0x36},
1097          {98, 0x36},
1098          {110, 0x35},
1099          {104, 0x35},
1100          {98, 0x35},
1101          {110, 0x34},
1102          {104, 0x34},
1103          {98, 0x34},
1104          {110, 0x33},
1105          {104, 0x33},
1106          {98, 0x33},
1107          {110, 0x32},
1108          {104, 0x32},
1109          {98, 0x32},
1110          {110, 0x31},
1111          {104, 0x31},
1112          {98, 0x31},
1113          {110, 0x30},
1114          {104, 0x30},
1115          {98, 0x30},
1116          {110, 0x25},
1117          {104, 0x25},
1118          {98, 0x25},
1119          {110, 0x24},
1120          {104, 0x24},
1121          {98, 0x24},
1122          {110, 0x23},
1123          {104, 0x23},
1124          {98, 0x23},
1125          {110, 0x22},
1126          {104, 0x18},
1127          {98, 0x18},
1128          {110, 0x17},
1129          {104, 0x17},
1130          {98, 0x17},
1131          {110, 0x16},
1132          {104, 0x16},
1133          {98, 0x16},
1134          {110, 0x15},
1135          {104, 0x15},
1136          {98, 0x15},
1137          {110, 0x14},
1138          {104, 0x14},
1139          {98, 0x14},
1140          {110, 0x13},
1141          {104, 0x13},
1142          {98, 0x13},
1143          {110, 0x12},
1144          {104, 0x08},
1145          {98, 0x08},
1146          {110, 0x07},
1147          {104, 0x07},
1148          {98, 0x07},
1149          {110, 0x06},
1150          {104, 0x06},
1151          {98, 0x06},
1152          {110, 0x05},
1153          {104, 0x05},
1154          {98, 0x05},
1155          {110, 0x04},
1156          {104, 0x04},
1157          {98, 0x04},
1158          {110, 0x03},
1159          {104, 0x03},
1160          {98, 0x03},
1161          {110, 0x02},
1162          {104, 0x02},
1163          {98, 0x02},
1164          {110, 0x01},
1165          {104, 0x01},
1166          {98, 0x01},
1167          {110, 0x00},
1168          {104, 0x00},
1169          {98, 0x00},
1170          {93, 0x00},
1171          {88, 0x00},
1172          {83, 0x00},
1173          {78, 0x00},
1174          },
1175         /* 2.4GHz power gain index table */
1176         {
1177          {110, 0x3f},           /* highest txpower */
1178          {104, 0x3f},
1179          {98, 0x3f},
1180          {110, 0x3e},
1181          {104, 0x3e},
1182          {98, 0x3e},
1183          {110, 0x3d},
1184          {104, 0x3d},
1185          {98, 0x3d},
1186          {110, 0x3c},
1187          {104, 0x3c},
1188          {98, 0x3c},
1189          {110, 0x3b},
1190          {104, 0x3b},
1191          {98, 0x3b},
1192          {110, 0x3a},
1193          {104, 0x3a},
1194          {98, 0x3a},
1195          {110, 0x39},
1196          {104, 0x39},
1197          {98, 0x39},
1198          {110, 0x38},
1199          {104, 0x38},
1200          {98, 0x38},
1201          {110, 0x37},
1202          {104, 0x37},
1203          {98, 0x37},
1204          {110, 0x36},
1205          {104, 0x36},
1206          {98, 0x36},
1207          {110, 0x35},
1208          {104, 0x35},
1209          {98, 0x35},
1210          {110, 0x34},
1211          {104, 0x34},
1212          {98, 0x34},
1213          {110, 0x33},
1214          {104, 0x33},
1215          {98, 0x33},
1216          {110, 0x32},
1217          {104, 0x32},
1218          {98, 0x32},
1219          {110, 0x31},
1220          {104, 0x31},
1221          {98, 0x31},
1222          {110, 0x30},
1223          {104, 0x30},
1224          {98, 0x30},
1225          {110, 0x6},
1226          {104, 0x6},
1227          {98, 0x6},
1228          {110, 0x5},
1229          {104, 0x5},
1230          {98, 0x5},
1231          {110, 0x4},
1232          {104, 0x4},
1233          {98, 0x4},
1234          {110, 0x3},
1235          {104, 0x3},
1236          {98, 0x3},
1237          {110, 0x2},
1238          {104, 0x2},
1239          {98, 0x2},
1240          {110, 0x1},
1241          {104, 0x1},
1242          {98, 0x1},
1243          {110, 0x0},
1244          {104, 0x0},
1245          {98, 0x0},
1246          {97, 0},
1247          {96, 0},
1248          {95, 0},
1249          {94, 0},
1250          {93, 0},
1251          {92, 0},
1252          {91, 0},
1253          {90, 0},
1254          {89, 0},
1255          {88, 0},
1256          {87, 0},
1257          {86, 0},
1258          {85, 0},
1259          {84, 0},
1260          {83, 0},
1261          {82, 0},
1262          {81, 0},
1263          {80, 0},
1264          {79, 0},
1265          {78, 0},
1266          {77, 0},
1267          {76, 0},
1268          {75, 0},
1269          {74, 0},
1270          {73, 0},
1271          {72, 0},
1272          {71, 0},
1273          {70, 0},
1274          {69, 0},
1275          {68, 0},
1276          {67, 0},
1277          {66, 0},
1278          {65, 0},
1279          {64, 0},
1280          {63, 0},
1281          {62, 0},
1282          {61, 0},
1283          {60, 0},
1284          {59, 0},
1285          }
1286 };
1287
1288 static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
1289                                     u8 is_fat, u8 ctrl_chan_high,
1290                                     struct iwl4965_tx_power_db *tx_power_tbl)
1291 {
1292         u8 saturation_power;
1293         s32 target_power;
1294         s32 user_target_power;
1295         s32 power_limit;
1296         s32 current_temp;
1297         s32 reg_limit;
1298         s32 current_regulatory;
1299         s32 txatten_grp = CALIB_CH_GROUP_MAX;
1300         int i;
1301         int c;
1302         const struct iwl_channel_info *ch_info = NULL;
1303         struct iwl_eeprom_calib_ch_info ch_eeprom_info;
1304         const struct iwl_eeprom_calib_measure *measurement;
1305         s16 voltage;
1306         s32 init_voltage;
1307         s32 voltage_compensation;
1308         s32 degrees_per_05db_num;
1309         s32 degrees_per_05db_denom;
1310         s32 factory_temp;
1311         s32 temperature_comp[2];
1312         s32 factory_gain_index[2];
1313         s32 factory_actual_pwr[2];
1314         s32 power_index;
1315
1316         /* user_txpower_limit is in dBm, convert to half-dBm (half-dB units
1317          *   are used for indexing into txpower table) */
1318         user_target_power = 2 * priv->tx_power_user_lmt;
1319
1320         /* Get current (RXON) channel, band, width */
1321         IWL_DEBUG_TXPOWER("chan %d band %d is_fat %d\n", channel, band,
1322                           is_fat);
1323
1324         ch_info = iwl_get_channel_info(priv, priv->band, channel);
1325
1326         if (!is_channel_valid(ch_info))
1327                 return -EINVAL;
1328
1329         /* get txatten group, used to select 1) thermal txpower adjustment
1330          *   and 2) mimo txpower balance between Tx chains. */
1331         txatten_grp = iwl4965_get_tx_atten_grp(channel);
1332         if (txatten_grp < 0)
1333                 return -EINVAL;
1334
1335         IWL_DEBUG_TXPOWER("channel %d belongs to txatten group %d\n",
1336                           channel, txatten_grp);
1337
1338         if (is_fat) {
1339                 if (ctrl_chan_high)
1340                         channel -= 2;
1341                 else
1342                         channel += 2;
1343         }
1344
1345         /* hardware txpower limits ...
1346          * saturation (clipping distortion) txpowers are in half-dBm */
1347         if (band)
1348                 saturation_power = priv->calib_info->saturation_power24;
1349         else
1350                 saturation_power = priv->calib_info->saturation_power52;
1351
1352         if (saturation_power < IWL_TX_POWER_SATURATION_MIN ||
1353             saturation_power > IWL_TX_POWER_SATURATION_MAX) {
1354                 if (band)
1355                         saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24;
1356                 else
1357                         saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52;
1358         }
1359
1360         /* regulatory txpower limits ... reg_limit values are in half-dBm,
1361          *   max_power_avg values are in dBm, convert * 2 */
1362         if (is_fat)
1363                 reg_limit = ch_info->fat_max_power_avg * 2;
1364         else
1365                 reg_limit = ch_info->max_power_avg * 2;
1366
1367         if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) ||
1368             (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) {
1369                 if (band)
1370                         reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24;
1371                 else
1372                         reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52;
1373         }
1374
1375         /* Interpolate txpower calibration values for this channel,
1376          *   based on factory calibration tests on spaced channels. */
1377         iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
1378
1379         /* calculate tx gain adjustment based on power supply voltage */
1380         voltage = priv->calib_info->voltage;
1381         init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
1382         voltage_compensation =
1383             iwl4965_get_voltage_compensation(voltage, init_voltage);
1384
1385         IWL_DEBUG_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n",
1386                           init_voltage,
1387                           voltage, voltage_compensation);
1388
1389         /* get current temperature (Celsius) */
1390         current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN);
1391         current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX);
1392         current_temp = KELVIN_TO_CELSIUS(current_temp);
1393
1394         /* select thermal txpower adjustment params, based on channel group
1395          *   (same frequency group used for mimo txatten adjustment) */
1396         degrees_per_05db_num =
1397             tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
1398         degrees_per_05db_denom =
1399             tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
1400
1401         /* get per-chain txpower values from factory measurements */
1402         for (c = 0; c < 2; c++) {
1403                 measurement = &ch_eeprom_info.measurements[c][1];
1404
1405                 /* txgain adjustment (in half-dB steps) based on difference
1406                  *   between factory and current temperature */
1407                 factory_temp = measurement->temperature;
1408                 iwl4965_math_div_round((current_temp - factory_temp) *
1409                                        degrees_per_05db_denom,
1410                                        degrees_per_05db_num,
1411                                        &temperature_comp[c]);
1412
1413                 factory_gain_index[c] = measurement->gain_idx;
1414                 factory_actual_pwr[c] = measurement->actual_pow;
1415
1416                 IWL_DEBUG_TXPOWER("chain = %d\n", c);
1417                 IWL_DEBUG_TXPOWER("fctry tmp %d, "
1418                                   "curr tmp %d, comp %d steps\n",
1419                                   factory_temp, current_temp,
1420                                   temperature_comp[c]);
1421
1422                 IWL_DEBUG_TXPOWER("fctry idx %d, fctry pwr %d\n",
1423                                   factory_gain_index[c],
1424                                   factory_actual_pwr[c]);
1425         }
1426
1427         /* for each of 33 bit-rates (including 1 for CCK) */
1428         for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
1429                 u8 is_mimo_rate;
1430                 union iwl4965_tx_power_dual_stream tx_power;
1431
1432                 /* for mimo, reduce each chain's txpower by half
1433                  * (3dB, 6 steps), so total output power is regulatory
1434                  * compliant. */
1435                 if (i & 0x8) {
1436                         current_regulatory = reg_limit -
1437                             IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
1438                         is_mimo_rate = 1;
1439                 } else {
1440                         current_regulatory = reg_limit;
1441                         is_mimo_rate = 0;
1442                 }
1443
1444                 /* find txpower limit, either hardware or regulatory */
1445                 power_limit = saturation_power - back_off_table[i];
1446                 if (power_limit > current_regulatory)
1447                         power_limit = current_regulatory;
1448
1449                 /* reduce user's txpower request if necessary
1450                  * for this rate on this channel */
1451                 target_power = user_target_power;
1452                 if (target_power > power_limit)
1453                         target_power = power_limit;
1454
1455                 IWL_DEBUG_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n",
1456                                   i, saturation_power - back_off_table[i],
1457                                   current_regulatory, user_target_power,
1458                                   target_power);
1459
1460                 /* for each of 2 Tx chains (radio transmitters) */
1461                 for (c = 0; c < 2; c++) {
1462                         s32 atten_value;
1463
1464                         if (is_mimo_rate)
1465                                 atten_value =
1466                                     (s32)le32_to_cpu(priv->card_alive_init.
1467                                     tx_atten[txatten_grp][c]);
1468                         else
1469                                 atten_value = 0;
1470
1471                         /* calculate index; higher index means lower txpower */
1472                         power_index = (u8) (factory_gain_index[c] -
1473                                             (target_power -
1474                                              factory_actual_pwr[c]) -
1475                                             temperature_comp[c] -
1476                                             voltage_compensation +
1477                                             atten_value);
1478
1479 /*                      IWL_DEBUG_TXPOWER("calculated txpower index %d\n",
1480                                                 power_index); */
1481
1482                         if (power_index < get_min_power_index(i, band))
1483                                 power_index = get_min_power_index(i, band);
1484
1485                         /* adjust 5 GHz index to support negative indexes */
1486                         if (!band)
1487                                 power_index += 9;
1488
1489                         /* CCK, rate 32, reduce txpower for CCK */
1490                         if (i == POWER_TABLE_CCK_ENTRY)
1491                                 power_index +=
1492                                     IWL_TX_POWER_CCK_COMPENSATION_C_STEP;
1493
1494                         /* stay within the table! */
1495                         if (power_index > 107) {
1496                                 IWL_WARNING("txpower index %d > 107\n",
1497                                             power_index);
1498                                 power_index = 107;
1499                         }
1500                         if (power_index < 0) {
1501                                 IWL_WARNING("txpower index %d < 0\n",
1502                                             power_index);
1503                                 power_index = 0;
1504                         }
1505
1506                         /* fill txpower command for this rate/chain */
1507                         tx_power.s.radio_tx_gain[c] =
1508                                 gain_table[band][power_index].radio;
1509                         tx_power.s.dsp_predis_atten[c] =
1510                                 gain_table[band][power_index].dsp;
1511
1512                         IWL_DEBUG_TXPOWER("chain %d mimo %d index %d "
1513                                           "gain 0x%02x dsp %d\n",
1514                                           c, atten_value, power_index,
1515                                         tx_power.s.radio_tx_gain[c],
1516                                         tx_power.s.dsp_predis_atten[c]);
1517                 } /* for each chain */
1518
1519                 tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
1520
1521         } /* for each rate */
1522
1523         return 0;
1524 }
1525
1526 /**
1527  * iwl4965_send_tx_power - Configure the TXPOWER level user limit
1528  *
1529  * Uses the active RXON for channel, band, and characteristics (fat, high)
1530  * The power limit is taken from priv->tx_power_user_lmt.
1531  */
1532 static int iwl4965_send_tx_power(struct iwl_priv *priv)
1533 {
1534         struct iwl4965_txpowertable_cmd cmd = { 0 };
1535         int ret;
1536         u8 band = 0;
1537         u8 is_fat = 0;
1538         u8 ctrl_chan_high = 0;
1539
1540         if (test_bit(STATUS_SCANNING, &priv->status)) {
1541                 /* If this gets hit a lot, switch it to a BUG() and catch
1542                  * the stack trace to find out who is calling this during
1543                  * a scan. */
1544                 IWL_WARNING("TX Power requested while scanning!\n");
1545                 return -EAGAIN;
1546         }
1547
1548         band = priv->band == IEEE80211_BAND_2GHZ;
1549
1550         is_fat =  is_fat_channel(priv->active_rxon.flags);
1551
1552         if (is_fat &&
1553             (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
1554                 ctrl_chan_high = 1;
1555
1556         cmd.band = band;
1557         cmd.channel = priv->active_rxon.channel;
1558
1559         ret = iwl4965_fill_txpower_tbl(priv, band,
1560                                 le16_to_cpu(priv->active_rxon.channel),
1561                                 is_fat, ctrl_chan_high, &cmd.tx_power);
1562         if (ret)
1563                 goto out;
1564
1565         ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
1566
1567 out:
1568         return ret;
1569 }
1570
1571 static int iwl4965_send_rxon_assoc(struct iwl_priv *priv)
1572 {
1573         int ret = 0;
1574         struct iwl4965_rxon_assoc_cmd rxon_assoc;
1575         const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
1576         const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
1577
1578         if ((rxon1->flags == rxon2->flags) &&
1579             (rxon1->filter_flags == rxon2->filter_flags) &&
1580             (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1581             (rxon1->ofdm_ht_single_stream_basic_rates ==
1582              rxon2->ofdm_ht_single_stream_basic_rates) &&
1583             (rxon1->ofdm_ht_dual_stream_basic_rates ==
1584              rxon2->ofdm_ht_dual_stream_basic_rates) &&
1585             (rxon1->rx_chain == rxon2->rx_chain) &&
1586             (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1587                 IWL_DEBUG_INFO("Using current RXON_ASSOC.  Not resending.\n");
1588                 return 0;
1589         }
1590
1591         rxon_assoc.flags = priv->staging_rxon.flags;
1592         rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
1593         rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
1594         rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
1595         rxon_assoc.reserved = 0;
1596         rxon_assoc.ofdm_ht_single_stream_basic_rates =
1597             priv->staging_rxon.ofdm_ht_single_stream_basic_rates;
1598         rxon_assoc.ofdm_ht_dual_stream_basic_rates =
1599             priv->staging_rxon.ofdm_ht_dual_stream_basic_rates;
1600         rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain;
1601
1602         ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC,
1603                                      sizeof(rxon_assoc), &rxon_assoc, NULL);
1604         if (ret)
1605                 return ret;
1606
1607         return ret;
1608 }
1609
1610
1611 int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel)
1612 {
1613         int rc;
1614         u8 band = 0;
1615         u8 is_fat = 0;
1616         u8 ctrl_chan_high = 0;
1617         struct iwl4965_channel_switch_cmd cmd = { 0 };
1618         const struct iwl_channel_info *ch_info;
1619
1620         band = priv->band == IEEE80211_BAND_2GHZ;
1621
1622         ch_info = iwl_get_channel_info(priv, priv->band, channel);
1623
1624         is_fat = is_fat_channel(priv->staging_rxon.flags);
1625
1626         if (is_fat &&
1627             (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
1628                 ctrl_chan_high = 1;
1629
1630         cmd.band = band;
1631         cmd.expect_beacon = 0;
1632         cmd.channel = cpu_to_le16(channel);
1633         cmd.rxon_flags = priv->active_rxon.flags;
1634         cmd.rxon_filter_flags = priv->active_rxon.filter_flags;
1635         cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
1636         if (ch_info)
1637                 cmd.expect_beacon = is_channel_radar(ch_info);
1638         else
1639                 cmd.expect_beacon = 1;
1640
1641         rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_fat,
1642                                       ctrl_chan_high, &cmd.tx_power);
1643         if (rc) {
1644                 IWL_DEBUG_11H("error:%d  fill txpower_tbl\n", rc);
1645                 return rc;
1646         }
1647
1648         rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
1649         return rc;
1650 }
1651
1652 static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv)
1653 {
1654         struct iwl4965_shared *s = priv->shared_virt;
1655         return le32_to_cpu(s->rb_closed) & 0xFFF;
1656 }
1657
1658 static int iwl4965_alloc_shared_mem(struct iwl_priv *priv)
1659 {
1660         priv->shared_virt = pci_alloc_consistent(priv->pci_dev,
1661                                         sizeof(struct iwl4965_shared),
1662                                         &priv->shared_phys);
1663         if (!priv->shared_virt)
1664                 return -ENOMEM;
1665
1666         memset(priv->shared_virt, 0, sizeof(struct iwl4965_shared));
1667
1668         priv->rb_closed_offset = offsetof(struct iwl4965_shared, rb_closed);
1669
1670         return 0;
1671 }
1672
1673 static void iwl4965_free_shared_mem(struct iwl_priv *priv)
1674 {
1675         if (priv->shared_virt)
1676                 pci_free_consistent(priv->pci_dev,
1677                                     sizeof(struct iwl4965_shared),
1678                                     priv->shared_virt,
1679                                     priv->shared_phys);
1680 }
1681
1682 /**
1683  * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
1684  */
1685 static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
1686                                             struct iwl_tx_queue *txq,
1687                                             u16 byte_cnt)
1688 {
1689         int len;
1690         int txq_id = txq->q.id;
1691         struct iwl4965_shared *shared_data = priv->shared_virt;
1692
1693         len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
1694
1695         /* Set up byte count within first 256 entries */
1696         IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id].
1697                        tfd_offset[txq->q.write_ptr], byte_cnt, len);
1698
1699         /* If within first 64 entries, duplicate at end */
1700         if (txq->q.write_ptr < IWL49_MAX_WIN_SIZE)
1701                 IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id].
1702                         tfd_offset[IWL49_QUEUE_SIZE + txq->q.write_ptr],
1703                         byte_cnt, len);
1704 }
1705
1706 /**
1707  * sign_extend - Sign extend a value using specified bit as sign-bit
1708  *
1709  * Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1
1710  * and bit0..2 is 001b which when sign extended to 1111111111111001b is -7.
1711  *
1712  * @param oper value to sign extend
1713  * @param index 0 based bit index (0<=index<32) to sign bit
1714  */
1715 static s32 sign_extend(u32 oper, int index)
1716 {
1717         u8 shift = 31 - index;
1718
1719         return (s32)(oper << shift) >> shift;
1720 }
1721
1722 /**
1723  * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
1724  * @statistics: Provides the temperature reading from the uCode
1725  *
1726  * A return of <0 indicates bogus data in the statistics
1727  */
1728 static int iwl4965_hw_get_temperature(const struct iwl_priv *priv)
1729 {
1730         s32 temperature;
1731         s32 vt;
1732         s32 R1, R2, R3;
1733         u32 R4;
1734
1735         if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
1736                 (priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)) {
1737                 IWL_DEBUG_TEMP("Running FAT temperature calibration\n");
1738                 R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
1739                 R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
1740                 R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
1741                 R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
1742         } else {
1743                 IWL_DEBUG_TEMP("Running temperature calibration\n");
1744                 R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
1745                 R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
1746                 R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
1747                 R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]);
1748         }
1749
1750         /*
1751          * Temperature is only 23 bits, so sign extend out to 32.
1752          *
1753          * NOTE If we haven't received a statistics notification yet
1754          * with an updated temperature, use R4 provided to us in the
1755          * "initialize" ALIVE response.
1756          */
1757         if (!test_bit(STATUS_TEMPERATURE, &priv->status))
1758                 vt = sign_extend(R4, 23);
1759         else
1760                 vt = sign_extend(
1761                         le32_to_cpu(priv->statistics.general.temperature), 23);
1762
1763         IWL_DEBUG_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
1764
1765         if (R3 == R1) {
1766                 IWL_ERROR("Calibration conflict R1 == R3\n");
1767                 return -1;
1768         }
1769
1770         /* Calculate temperature in degrees Kelvin, adjust by 97%.
1771          * Add offset to center the adjustment around 0 degrees Centigrade. */
1772         temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
1773         temperature /= (R3 - R1);
1774         temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
1775
1776         IWL_DEBUG_TEMP("Calibrated temperature: %dK, %dC\n",
1777                         temperature, KELVIN_TO_CELSIUS(temperature));
1778
1779         return temperature;
1780 }
1781
1782 /* Adjust Txpower only if temperature variance is greater than threshold. */
1783 #define IWL_TEMPERATURE_THRESHOLD   3
1784
1785 /**
1786  * iwl4965_is_temp_calib_needed - determines if new calibration is needed
1787  *
1788  * If the temperature changed has changed sufficiently, then a recalibration
1789  * is needed.
1790  *
1791  * Assumes caller will replace priv->last_temperature once calibration
1792  * executed.
1793  */
1794 static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
1795 {
1796         int temp_diff;
1797
1798         if (!test_bit(STATUS_STATISTICS, &priv->status)) {
1799                 IWL_DEBUG_TEMP("Temperature not updated -- no statistics.\n");
1800                 return 0;
1801         }
1802
1803         temp_diff = priv->temperature - priv->last_temperature;
1804
1805         /* get absolute value */
1806         if (temp_diff < 0) {
1807                 IWL_DEBUG_POWER("Getting cooler, delta %d, \n", temp_diff);
1808                 temp_diff = -temp_diff;
1809         } else if (temp_diff == 0)
1810                 IWL_DEBUG_POWER("Same temp, \n");
1811         else
1812                 IWL_DEBUG_POWER("Getting warmer, delta %d, \n", temp_diff);
1813
1814         if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
1815                 IWL_DEBUG_POWER("Thermal txpower calib not needed\n");
1816                 return 0;
1817         }
1818
1819         IWL_DEBUG_POWER("Thermal txpower calib needed\n");
1820
1821         return 1;
1822 }
1823
1824 static void iwl4965_temperature_calib(struct iwl_priv *priv)
1825 {
1826         s32 temp;
1827
1828         temp = iwl4965_hw_get_temperature(priv);
1829         if (temp < 0)
1830                 return;
1831
1832         if (priv->temperature != temp) {
1833                 if (priv->temperature)
1834                         IWL_DEBUG_TEMP("Temperature changed "
1835                                        "from %dC to %dC\n",
1836                                        KELVIN_TO_CELSIUS(priv->temperature),
1837                                        KELVIN_TO_CELSIUS(temp));
1838                 else
1839                         IWL_DEBUG_TEMP("Temperature "
1840                                        "initialized to %dC\n",
1841                                        KELVIN_TO_CELSIUS(temp));
1842         }
1843
1844         priv->temperature = temp;
1845         set_bit(STATUS_TEMPERATURE, &priv->status);
1846
1847         if (!priv->disable_tx_power_cal &&
1848              unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
1849              iwl4965_is_temp_calib_needed(priv))
1850                 queue_work(priv->workqueue, &priv->txpower_work);
1851 }
1852
1853 /**
1854  * iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
1855  */
1856 static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
1857                                             u16 txq_id)
1858 {
1859         /* Simply stop the queue, but don't change any configuration;
1860          * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
1861         iwl_write_prph(priv,
1862                 IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
1863                 (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
1864                 (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
1865 }
1866
1867 /**
1868  * txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE
1869  * priv->lock must be held by the caller
1870  */
1871 static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
1872                                    u16 ssn_idx, u8 tx_fifo)
1873 {
1874         int ret = 0;
1875
1876         if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
1877             (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
1878                 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
1879                         txq_id, IWL49_FIRST_AMPDU_QUEUE,
1880                         IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
1881                 return -EINVAL;
1882         }
1883
1884         ret = iwl_grab_nic_access(priv);
1885         if (ret)
1886                 return ret;
1887
1888         iwl4965_tx_queue_stop_scheduler(priv, txq_id);
1889
1890         iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
1891
1892         priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
1893         priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
1894         /* supposes that ssn_idx is valid (!= 0xFFF) */
1895         iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
1896
1897         iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
1898         iwl_txq_ctx_deactivate(priv, txq_id);
1899         iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
1900
1901         iwl_release_nic_access(priv);
1902
1903         return 0;
1904 }
1905
1906 /**
1907  * iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
1908  */
1909 static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
1910                                         u16 txq_id)
1911 {
1912         u32 tbl_dw_addr;
1913         u32 tbl_dw;
1914         u16 scd_q2ratid;
1915
1916         scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
1917
1918         tbl_dw_addr = priv->scd_base_addr +
1919                         IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
1920
1921         tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
1922
1923         if (txq_id & 0x1)
1924                 tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
1925         else
1926                 tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
1927
1928         iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
1929
1930         return 0;
1931 }
1932
1933
1934 /**
1935  * iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
1936  *
1937  * NOTE:  txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE,
1938  *        i.e. it must be one of the higher queues used for aggregation
1939  */
1940 static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
1941                                   int tx_fifo, int sta_id, int tid, u16 ssn_idx)
1942 {
1943         unsigned long flags;
1944         int ret;
1945         u16 ra_tid;
1946
1947         if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
1948             (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
1949                 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
1950                         txq_id, IWL49_FIRST_AMPDU_QUEUE,
1951                         IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
1952                 return -EINVAL;
1953         }
1954
1955         ra_tid = BUILD_RAxTID(sta_id, tid);
1956
1957         /* Modify device's station table to Tx this TID */
1958         iwl_sta_modify_enable_tid_tx(priv, sta_id, tid);
1959
1960         spin_lock_irqsave(&priv->lock, flags);
1961         ret = iwl_grab_nic_access(priv);
1962         if (ret) {
1963                 spin_unlock_irqrestore(&priv->lock, flags);
1964                 return ret;
1965         }
1966
1967         /* Stop this Tx queue before configuring it */
1968         iwl4965_tx_queue_stop_scheduler(priv, txq_id);
1969
1970         /* Map receiver-address / traffic-ID to this queue */
1971         iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
1972
1973         /* Set this queue as a chain-building queue */
1974         iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
1975
1976         /* Place first TFD at index corresponding to start sequence number.
1977          * Assumes that ssn_idx is valid (!= 0xFFF) */
1978         priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
1979         priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
1980         iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
1981
1982         /* Set up Tx window size and frame limit for this queue */
1983         iwl_write_targ_mem(priv,
1984                 priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
1985                 (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
1986                 IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
1987
1988         iwl_write_targ_mem(priv, priv->scd_base_addr +
1989                 IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
1990                 (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS)
1991                 & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
1992
1993         iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
1994
1995         /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
1996         iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
1997
1998         iwl_release_nic_access(priv);
1999         spin_unlock_irqrestore(&priv->lock, flags);
2000
2001         return 0;
2002 }
2003
2004
2005 static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
2006 {
2007         switch (cmd_id) {
2008         case REPLY_RXON:
2009                 return (u16) sizeof(struct iwl4965_rxon_cmd);
2010         default:
2011                 return len;
2012         }
2013 }
2014
2015 static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
2016 {
2017         struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data;
2018         addsta->mode = cmd->mode;
2019         memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
2020         memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
2021         addsta->station_flags = cmd->station_flags;
2022         addsta->station_flags_msk = cmd->station_flags_msk;
2023         addsta->tid_disable_tx = cmd->tid_disable_tx;
2024         addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
2025         addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
2026         addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
2027         addsta->reserved1 = __constant_cpu_to_le16(0);
2028         addsta->reserved2 = __constant_cpu_to_le32(0);
2029
2030         return (u16)sizeof(struct iwl4965_addsta_cmd);
2031 }
2032
2033 static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
2034 {
2035         return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
2036 }
2037
2038 /**
2039  * iwl4965_tx_status_reply_tx - Handle Tx rspnse for frames in aggregation queue
2040  */
2041 static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
2042                                       struct iwl_ht_agg *agg,
2043                                       struct iwl4965_tx_resp *tx_resp,
2044                                       int txq_id, u16 start_idx)
2045 {
2046         u16 status;
2047         struct agg_tx_status *frame_status = tx_resp->u.agg_status;
2048         struct ieee80211_tx_info *info = NULL;
2049         struct ieee80211_hdr *hdr = NULL;
2050         u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
2051         int i, sh, idx;
2052         u16 seq;
2053         if (agg->wait_for_ba)
2054                 IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n");
2055
2056         agg->frame_count = tx_resp->frame_count;
2057         agg->start_idx = start_idx;
2058         agg->rate_n_flags = rate_n_flags;
2059         agg->bitmap = 0;
2060
2061         /* # frames attempted by Tx command */
2062         if (agg->frame_count == 1) {
2063                 /* Only one frame was attempted; no block-ack will arrive */
2064                 status = le16_to_cpu(frame_status[0].status);
2065                 idx = start_idx;
2066
2067                 /* FIXME: code repetition */
2068                 IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
2069                                    agg->frame_count, agg->start_idx, idx);
2070
2071                 info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
2072                 info->status.retry_count = tx_resp->failure_frame;
2073                 info->flags &= ~IEEE80211_TX_CTL_AMPDU;
2074                 info->flags |= iwl_is_tx_success(status)?
2075                         IEEE80211_TX_STAT_ACK : 0;
2076                 iwl_hwrate_to_tx_control(priv, rate_n_flags, info);
2077                 /* FIXME: code repetition end */
2078
2079                 IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n",
2080                                     status & 0xff, tx_resp->failure_frame);
2081                 IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
2082
2083                 agg->wait_for_ba = 0;
2084         } else {
2085                 /* Two or more frames were attempted; expect block-ack */
2086                 u64 bitmap = 0;
2087                 int start = agg->start_idx;
2088
2089                 /* Construct bit-map of pending frames within Tx window */
2090                 for (i = 0; i < agg->frame_count; i++) {
2091                         u16 sc;
2092                         status = le16_to_cpu(frame_status[i].status);
2093                         seq  = le16_to_cpu(frame_status[i].sequence);
2094                         idx = SEQ_TO_INDEX(seq);
2095                         txq_id = SEQ_TO_QUEUE(seq);
2096
2097                         if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
2098                                       AGG_TX_STATE_ABORT_MSK))
2099                                 continue;
2100
2101                         IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
2102                                            agg->frame_count, txq_id, idx);
2103
2104                         hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
2105
2106                         sc = le16_to_cpu(hdr->seq_ctrl);
2107                         if (idx != (SEQ_TO_SN(sc) & 0xff)) {
2108                                 IWL_ERROR("BUG_ON idx doesn't match seq control"
2109                                           " idx=%d, seq_idx=%d, seq=%d\n",
2110                                           idx, SEQ_TO_SN(sc),
2111                                           hdr->seq_ctrl);
2112                                 return -1;
2113                         }
2114
2115                         IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
2116                                            i, idx, SEQ_TO_SN(sc));
2117
2118                         sh = idx - start;
2119                         if (sh > 64) {
2120                                 sh = (start - idx) + 0xff;
2121                                 bitmap = bitmap << sh;
2122                                 sh = 0;
2123                                 start = idx;
2124                         } else if (sh < -64)
2125                                 sh  = 0xff - (start - idx);
2126                         else if (sh < 0) {
2127                                 sh = start - idx;
2128                                 start = idx;
2129                                 bitmap = bitmap << sh;
2130                                 sh = 0;
2131                         }
2132                         bitmap |= 1ULL << sh;
2133                         IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
2134                                            start, (unsigned long long)bitmap);
2135                 }
2136
2137                 agg->bitmap = bitmap;
2138                 agg->start_idx = start;
2139                 IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
2140                                    agg->frame_count, agg->start_idx,
2141                                    (unsigned long long)agg->bitmap);
2142
2143                 if (bitmap)
2144                         agg->wait_for_ba = 1;
2145         }
2146         return 0;
2147 }
2148
2149 /**
2150  * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
2151  */
2152 static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
2153                                 struct iwl_rx_mem_buffer *rxb)
2154 {
2155         struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
2156         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
2157         int txq_id = SEQ_TO_QUEUE(sequence);
2158         int index = SEQ_TO_INDEX(sequence);
2159         struct iwl_tx_queue *txq = &priv->txq[txq_id];
2160         struct ieee80211_tx_info *info;
2161         struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
2162         u32  status = le32_to_cpu(tx_resp->u.status);
2163         int tid = MAX_TID_COUNT, sta_id = IWL_INVALID_STATION;
2164         __le16 fc;
2165         struct ieee80211_hdr *hdr;
2166         u8 *qc = NULL;
2167
2168         if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
2169                 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
2170                           "is out of range [0-%d] %d %d\n", txq_id,
2171                           index, txq->q.n_bd, txq->q.write_ptr,
2172                           txq->q.read_ptr);
2173                 return;
2174         }
2175
2176         info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
2177         memset(&info->status, 0, sizeof(info->status));
2178
2179         hdr = iwl_tx_queue_get_hdr(priv, txq_id, index);
2180         fc = hdr->frame_control;
2181         if (ieee80211_is_data_qos(fc)) {
2182                 qc = ieee80211_get_qos_ctl(hdr);
2183                 tid = qc[0] & 0xf;
2184         }
2185
2186         sta_id = iwl_get_ra_sta_id(priv, hdr);
2187         if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) {
2188                 IWL_ERROR("Station not known\n");
2189                 return;
2190         }
2191
2192         if (txq->sched_retry) {
2193                 const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp);
2194                 struct iwl_ht_agg *agg = NULL;
2195
2196                 if (!qc)
2197                         return;
2198
2199                 agg = &priv->stations[sta_id].tid[tid].agg;
2200
2201                 iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
2202
2203                 /* check if BAR is needed */
2204                 if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
2205                         info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
2206
2207                 if (txq->q.read_ptr != (scd_ssn & 0xff)) {
2208                         int freed, ampdu_q;
2209                         index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
2210                         IWL_DEBUG_TX_REPLY("Retry scheduler reclaim scd_ssn "
2211                                            "%d index %d\n", scd_ssn , index);
2212                         freed = iwl_tx_queue_reclaim(priv, txq_id, index);
2213                         priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
2214
2215                         if (iwl_queue_space(&txq->q) > txq->q.low_mark &&
2216                             txq_id >= 0 && priv->mac80211_registered &&
2217                             agg->state != IWL_EMPTYING_HW_QUEUE_DELBA) {
2218                                 /* calculate mac80211 ampdu sw queue to wake */
2219                                 ampdu_q = txq_id - IWL49_FIRST_AMPDU_QUEUE +
2220                                           priv->hw->queues;
2221                                 if (agg->state == IWL_AGG_OFF)
2222                                         ieee80211_wake_queue(priv->hw, txq_id);
2223                                 else
2224                                         ieee80211_wake_queue(priv->hw, ampdu_q);
2225                         }
2226                         iwl_txq_check_empty(priv, sta_id, tid, txq_id);
2227                 }
2228         } else {
2229                 info->status.retry_count = tx_resp->failure_frame;
2230                 info->flags |=
2231                         iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0;
2232                 iwl_hwrate_to_tx_control(priv,
2233                                         le32_to_cpu(tx_resp->rate_n_flags),
2234                                         info);
2235
2236                 IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) rate_n_flags "
2237                              "0x%x retries %d\n", txq_id,
2238                                 iwl_get_tx_fail_reason(status),
2239                                 status, le32_to_cpu(tx_resp->rate_n_flags),
2240                                 tx_resp->failure_frame);
2241
2242                 IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
2243
2244                 if (index != -1) {
2245                     int freed = iwl_tx_queue_reclaim(priv, txq_id, index);
2246                     if (tid != MAX_TID_COUNT)
2247                         priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
2248                     if (iwl_queue_space(&txq->q) > txq->q.low_mark &&
2249                         (txq_id >= 0) && priv->mac80211_registered)
2250                         ieee80211_wake_queue(priv->hw, txq_id);
2251                     if (tid != MAX_TID_COUNT)
2252                         iwl_txq_check_empty(priv, sta_id, tid, txq_id);
2253                 }
2254         }
2255
2256         if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
2257                 IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
2258 }
2259
2260 static int iwl4965_calc_rssi(struct iwl_priv *priv,
2261                              struct iwl_rx_phy_res *rx_resp)
2262 {
2263         /* data from PHY/DSP regarding signal strength, etc.,
2264          *   contents are always there, not configurable by host.  */
2265         struct iwl4965_rx_non_cfg_phy *ncphy =
2266             (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
2267         u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK)
2268                         >> IWL49_AGC_DB_POS;
2269
2270         u32 valid_antennae =
2271             (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK)
2272                         >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
2273         u8 max_rssi = 0;
2274         u32 i;
2275
2276         /* Find max rssi among 3 possible receivers.
2277          * These values are measured by the digital signal processor (DSP).
2278          * They should stay fairly constant even as the signal strength varies,
2279          *   if the radio's automatic gain control (AGC) is working right.
2280          * AGC value (see below) will provide the "interesting" info. */
2281         for (i = 0; i < 3; i++)
2282                 if (valid_antennae & (1 << i))
2283                         max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
2284
2285         IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
2286                 ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
2287                 max_rssi, agc);
2288
2289         /* dBm = max_rssi dB - agc dB - constant.
2290          * Higher AGC (higher radio gain) means lower signal. */
2291         return max_rssi - agc - IWL_RSSI_OFFSET;
2292 }
2293
2294
2295 /* Set up 4965-specific Rx frame reply handlers */
2296 static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
2297 {
2298         /* Legacy Rx frames */
2299         priv->rx_handlers[REPLY_RX] = iwl_rx_reply_rx;
2300         /* Tx response */
2301         priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx;
2302 }
2303
2304 static void iwl4965_setup_deferred_work(struct iwl_priv *priv)
2305 {
2306         INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
2307 }
2308
2309 static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
2310 {
2311         cancel_work_sync(&priv->txpower_work);
2312 }
2313
2314
2315 static struct iwl_hcmd_ops iwl4965_hcmd = {
2316         .rxon_assoc = iwl4965_send_rxon_assoc,
2317 };
2318
2319 static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
2320         .get_hcmd_size = iwl4965_get_hcmd_size,
2321         .build_addsta_hcmd = iwl4965_build_addsta_hcmd,
2322         .chain_noise_reset = iwl4965_chain_noise_reset,
2323         .gain_computation = iwl4965_gain_computation,
2324         .rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag,
2325         .calc_rssi = iwl4965_calc_rssi,
2326 };
2327
2328 static struct iwl_lib_ops iwl4965_lib = {
2329         .set_hw_params = iwl4965_hw_set_hw_params,
2330         .alloc_shared_mem = iwl4965_alloc_shared_mem,
2331         .free_shared_mem = iwl4965_free_shared_mem,
2332         .shared_mem_rx_idx = iwl4965_shared_mem_rx_idx,
2333         .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl,
2334         .txq_set_sched = iwl4965_txq_set_sched,
2335         .txq_agg_enable = iwl4965_txq_agg_enable,
2336         .txq_agg_disable = iwl4965_txq_agg_disable,
2337         .rx_handler_setup = iwl4965_rx_handler_setup,
2338         .setup_deferred_work = iwl4965_setup_deferred_work,
2339         .cancel_deferred_work = iwl4965_cancel_deferred_work,
2340         .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr,
2341         .alive_notify = iwl4965_alive_notify,
2342         .init_alive_start = iwl4965_init_alive_start,
2343         .load_ucode = iwl4965_load_bsm,
2344         .apm_ops = {
2345                 .init = iwl4965_apm_init,
2346                 .reset = iwl4965_apm_reset,
2347                 .stop = iwl4965_apm_stop,
2348                 .config = iwl4965_nic_config,
2349                 .set_pwr_src = iwl4965_set_pwr_src,
2350         },
2351         .eeprom_ops = {
2352                 .regulatory_bands = {
2353                         EEPROM_REGULATORY_BAND_1_CHANNELS,
2354                         EEPROM_REGULATORY_BAND_2_CHANNELS,
2355                         EEPROM_REGULATORY_BAND_3_CHANNELS,
2356                         EEPROM_REGULATORY_BAND_4_CHANNELS,
2357                         EEPROM_REGULATORY_BAND_5_CHANNELS,
2358                         EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS,
2359                         EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS
2360                 },
2361                 .verify_signature  = iwlcore_eeprom_verify_signature,
2362                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
2363                 .release_semaphore = iwlcore_eeprom_release_semaphore,
2364                 .check_version = iwl4965_eeprom_check_version,
2365                 .query_addr = iwlcore_eeprom_query_addr,
2366         },
2367         .send_tx_power  = iwl4965_send_tx_power,
2368         .update_chain_flags = iwl4965_update_chain_flags,
2369         .temperature = iwl4965_temperature_calib,
2370 };
2371
2372 static struct iwl_ops iwl4965_ops = {
2373         .lib = &iwl4965_lib,
2374         .hcmd = &iwl4965_hcmd,
2375         .utils = &iwl4965_hcmd_utils,
2376 };
2377
2378 struct iwl_cfg iwl4965_agn_cfg = {
2379         .name = "4965AGN",
2380         .fw_name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode",
2381         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
2382         .eeprom_size = IWL4965_EEPROM_IMG_SIZE,
2383         .ops = &iwl4965_ops,
2384         .mod_params = &iwl4965_mod_params,
2385 };
2386
2387 /* Module firmware */
2388 MODULE_FIRMWARE("iwlwifi-4965" IWL4965_UCODE_API ".ucode");
2389
2390 module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
2391 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
2392 module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
2393 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
2394 module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
2395 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
2396 module_param_named(debug, iwl4965_mod_params.debug, int, 0444);
2397 MODULE_PARM_DESC(debug, "debug output mask");
2398 module_param_named(
2399         disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444);
2400 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
2401
2402 module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444);
2403 MODULE_PARM_DESC(queues_num, "number of hw queues.");
2404 /* QoS */
2405 module_param_named(qos_enable, iwl4965_mod_params.enable_qos, int, 0444);
2406 MODULE_PARM_DESC(qos_enable, "enable all QoS functionality");
2407 /* 11n */
2408 module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, 0444);
2409 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
2410 module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444);
2411 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
2412
2413 module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444);
2414 MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error");