2 * linux/arch/arm/mach-aaec2000/core.c
4 * Code common to all AAEC-2000 machines
6 * Copyright (c) 2005 Nicolas Bellido Y Ortega
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/list.h>
17 #include <linux/errno.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/interrupt.h>
20 #include <linux/timex.h>
21 #include <linux/signal.h>
22 #include <linux/clk.h>
24 #include <mach/hardware.h>
26 #include <asm/sizes.h>
28 #include <asm/mach/flash.h>
29 #include <asm/mach/irq.h>
30 #include <asm/mach/time.h>
31 #include <asm/mach/map.h>
38 * Static virtual address mappings are as follow:
40 * 0xf8000000-0xf8001ffff: Devices connected to APB bus
41 * 0xf8002000-0xf8003ffff: Devices connected to AHB bus
43 * Below 0xe8000000 is reserved for vm allocation.
45 * The machine specific code must provide the extra mapping beside the
46 * default mapping provided here.
48 static struct map_desc standard_io_desc[] __initdata = {
50 .virtual = VIO_APB_BASE,
51 .pfn = __phys_to_pfn(PIO_APB_BASE),
52 .length = IO_APB_LENGTH,
55 .virtual = VIO_AHB_BASE,
56 .pfn = __phys_to_pfn(PIO_AHB_BASE),
57 .length = IO_AHB_LENGTH,
62 void __init aaec2000_map_io(void)
64 iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
68 * Interrupt handling routines
70 static void aaec2000_int_ack(unsigned int irq)
75 static void aaec2000_int_mask(unsigned int irq)
77 IRQ_INTENC |= (1 << irq);
80 static void aaec2000_int_unmask(unsigned int irq)
82 IRQ_INTENS |= (1 << irq);
85 static struct irq_chip aaec2000_irq_chip = {
86 .ack = aaec2000_int_ack,
87 .mask = aaec2000_int_mask,
88 .unmask = aaec2000_int_unmask,
91 void __init aaec2000_init_irq(void)
95 for (i = 0; i < NR_IRQS; i++) {
96 set_irq_handler(i, handle_level_irq);
97 set_irq_chip(i, &aaec2000_irq_chip);
98 set_irq_flags(i, IRQF_VALID);
101 /* Disable all interrupts */
102 IRQ_INTENC = 0xffffffff;
104 /* Clear any pending interrupts */
105 IRQ_INTSR = IRQ_INTSR;
111 /* IRQs are disabled before entering here from do_gettimeofday() */
112 static unsigned long aaec2000_gettimeoffset(void)
114 unsigned long ticks_to_match, elapsed, usec;
116 /* Get ticks before next timer match */
117 ticks_to_match = TIMER1_LOAD - TIMER1_VAL;
119 /* We need elapsed ticks since last match */
120 elapsed = LATCH - ticks_to_match;
122 /* Now, convert them to usec */
123 usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
128 /* We enter here with IRQs enabled */
130 aaec2000_timer_interrupt(int irq, void *dev_id)
132 /* TODO: Check timer accuracy */
139 static struct irqaction aaec2000_timer_irq = {
140 .name = "AAEC-2000 Timer Tick",
141 .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
142 .handler = aaec2000_timer_interrupt,
145 static void __init aaec2000_timer_init(void)
147 /* Disable timer 1 */
150 /* We have somehow to generate a 100Hz clock.
151 * We then use the 508KHz timer in periodic mode.
154 TIMER1_CLEAR = 1; /* Clear interrupt */
156 setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq);
158 TIMER1_CTRL = TIMER_CTRL_ENABLE |
159 TIMER_CTRL_PERIODIC |
160 TIMER_CTRL_CLKSEL_508K;
163 struct sys_timer aaec2000_timer = {
164 .init = aaec2000_timer_init,
165 .offset = aaec2000_gettimeoffset,
168 static struct clcd_panel mach_clcd_panel;
170 static int aaec2000_clcd_setup(struct clcd_fb *fb)
174 fb->panel = &mach_clcd_panel;
176 fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
179 if (!fb->fb.screen_base) {
180 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
184 fb->fb.fix.smem_start = dma;
185 fb->fb.fix.smem_len = SZ_1M;
190 static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
192 return dma_mmap_writecombine(&fb->dev->dev, vma,
194 fb->fb.fix.smem_start,
195 fb->fb.fix.smem_len);
198 static void aaec2000_clcd_remove(struct clcd_fb *fb)
200 dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
201 fb->fb.screen_base, fb->fb.fix.smem_start);
204 static struct clcd_board clcd_plat_data = {
206 .check = clcdfb_check,
207 .decode = clcdfb_decode,
208 .setup = aaec2000_clcd_setup,
209 .mmap = aaec2000_clcd_mmap,
210 .remove = aaec2000_clcd_remove,
213 static struct amba_device clcd_device = {
215 .init_name = "mb:16",
216 .coherent_dma_mask = ~0,
217 .platform_data = &clcd_plat_data,
220 .start = AAEC_CLCD_PHYS,
221 .end = AAEC_CLCD_PHYS + SZ_4K - 1,
222 .flags = IORESOURCE_MEM,
224 .irq = { INT_LCD, NO_IRQ },
228 static struct amba_device *amba_devs[] __initdata = {
232 void clk_disable(struct clk *clk)
236 int clk_set_rate(struct clk *clk, unsigned long rate)
241 int clk_enable(struct clk *clk)
246 struct clk *clk_get(struct device *dev, const char *id)
248 return dev && strcmp(dev_name(dev), "mb:16") == 0 ? NULL : ERR_PTR(-ENOENT);
251 void clk_put(struct clk *clk)
255 void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
257 clcd_plat_data.enable = clcd->enable;
258 clcd_plat_data.disable = clcd->disable;
259 memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
262 static struct flash_platform_data aaec2000_flash_data = {
263 .map_name = "cfi_probe",
267 static struct resource aaec2000_flash_resource = {
268 .start = AAEC_FLASH_BASE,
269 .end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
270 .flags = IORESOURCE_MEM,
273 static struct platform_device aaec2000_flash_device = {
277 .platform_data = &aaec2000_flash_data,
280 .resource = &aaec2000_flash_resource,
283 static int __init aaec2000_init(void)
287 for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
288 struct amba_device *d = amba_devs[i];
289 amba_device_register(d, &iomem_resource);
292 platform_device_register(&aaec2000_flash_device);
296 arch_initcall(aaec2000_init);