2 * linux/arch/arm/mach-omap1/board-h2.c
4 * Board specific inits for OMAP-1610 H2
6 * Copyright (C) 2001 RidgeRun, Inc.
7 * Author: Greg Lonnon <glonnon@ridgerun.com>
9 * Copyright (C) 2002 MontaVista Software, Inc.
11 * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
12 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
14 * H2 specific changes and cleanup
15 * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License version 2 as
19 * published by the Free Software Foundation.
22 #include <linux/kernel.h>
23 #include <linux/init.h>
24 #include <linux/device.h>
25 #include <linux/delay.h>
26 #include <linux/mtd/mtd.h>
27 #include <linux/mtd/partitions.h>
29 #include <asm/hardware.h>
30 #include <asm/mach-types.h>
31 #include <asm/mach/arch.h>
32 #include <asm/mach/flash.h>
33 #include <asm/mach/map.h>
35 #include <asm/arch/gpio.h>
36 #include <asm/arch/tc.h>
37 #include <asm/arch/usb.h>
38 #include <asm/arch/common.h>
40 extern int omap_gpio_init(void);
42 static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
44 static struct mtd_partition h2_partitions[] = {
45 /* bootloader (U-Boot, etc) in first sector */
50 .mask_flags = MTD_WRITEABLE, /* force read-only */
52 /* bootloader params in the next sector */
55 .offset = MTDPART_OFS_APPEND,
62 .offset = MTDPART_OFS_APPEND,
69 .offset = MTDPART_OFS_APPEND,
70 .size = MTDPART_SIZ_FULL,
75 static struct flash_platform_data h2_flash_data = {
76 .map_name = "cfi_probe",
78 .parts = h2_partitions,
79 .nr_parts = ARRAY_SIZE(h2_partitions),
82 static struct resource h2_flash_resource = {
83 .start = OMAP_CS2B_PHYS,
84 .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
85 .flags = IORESOURCE_MEM,
88 static struct platform_device h2_flash_device = {
92 .platform_data = &h2_flash_data,
95 .resource = &h2_flash_resource,
98 static struct resource h2_smc91x_resources[] = {
100 .start = OMAP1610_ETHR_START, /* Physical */
101 .end = OMAP1610_ETHR_START + 0xf,
102 .flags = IORESOURCE_MEM,
105 .start = OMAP_GPIO_IRQ(0),
106 .end = OMAP_GPIO_IRQ(0),
107 .flags = IORESOURCE_IRQ,
111 static struct platform_device h2_smc91x_device = {
114 .num_resources = ARRAY_SIZE(h2_smc91x_resources),
115 .resource = h2_smc91x_resources,
118 static struct platform_device *h2_devices[] __initdata = {
123 static void __init h2_init_smc91x(void)
125 if ((omap_request_gpio(0)) < 0) {
126 printk("Error requesting gpio 0 for smc91x irq\n");
129 omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE);
132 void h2_init_irq(void)
139 static struct omap_usb_config h2_usb_config __initdata = {
140 /* usb1 has a Mini-AB port and external isp1301 transceiver */
143 #ifdef CONFIG_USB_GADGET_OMAP
144 .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled
145 // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
146 #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
147 /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
148 .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled
154 static struct omap_mmc_config h2_mmc_config __initdata = {
156 .mmc1_power_pin = -1, /* tps65010 gpio3 */
157 .mmc1_switch_pin = OMAP_MPUIO(1),
160 static struct omap_board_config_kernel h2_config[] = {
161 { OMAP_TAG_USB, &h2_usb_config },
162 { OMAP_TAG_MMC, &h2_mmc_config },
165 static void __init h2_init(void)
167 platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
168 omap_board_config = h2_config;
169 omap_board_config_size = ARRAY_SIZE(h2_config);
172 static void __init h2_map_io(void)
174 omap_map_common_io();
175 omap_serial_init(h2_serial_ports);
178 MACHINE_START(OMAP_H2, "TI-H2")
179 /* Maintainer: Imre Deak <imre.deak@nokia.com> */
180 .phys_ram = 0x10000000,
181 .phys_io = 0xfff00000,
182 .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
183 .boot_params = 0x10000100,
185 .init_irq = h2_init_irq,
186 .init_machine = h2_init,
187 .timer = &omap_timer,