git.oblomov.eu Git - linux-2.6/blob - drivers/scsi/device_handler/scsi_dh_hp_sw.c

   1 /*
   2  * Basic HP/COMPAQ MSA 1000 support. This is only needed if your HW cannot be
   3  * upgraded.
   4  *
   5  * Copyright (C) 2006 Red Hat, Inc.  All rights reserved.
   6  * Copyright (C) 2006 Mike Christie
   7  * Copyright (C) 2008 Hannes Reinecke <hare@suse.de>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2, or (at your option)
  12  * any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; see the file COPYING.  If not, write to
  21  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  22  */
  23
  24 #include <scsi/scsi.h>
  25 #include <scsi/scsi_dbg.h>
  26 #include <scsi/scsi_eh.h>
  27 #include <scsi/scsi_dh.h>
  28
  29 #define HP_SW_NAME                      "hp_sw"
  30
  31 #define HP_SW_TIMEOUT                   (60 * HZ)
  32 #define HP_SW_RETRIES                   3
  33
  34 #define HP_SW_PATH_UNINITIALIZED        -1
  35 #define HP_SW_PATH_ACTIVE               0
  36 #define HP_SW_PATH_PASSIVE              1
  37
  38 struct hp_sw_dh_data {
  39         unsigned char sense[SCSI_SENSE_BUFFERSIZE];
  40         int path_state;
  41         int retries;
  42 };
  43
  44 static inline struct hp_sw_dh_data *get_hp_sw_data(struct scsi_device *sdev)
  45 {
  46         struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
  47         BUG_ON(scsi_dh_data == NULL);
  48         return ((struct hp_sw_dh_data *) scsi_dh_data->buf);
  49 }
  50
  51 /*
  52  * tur_done - Handle TEST UNIT READY return status
  53  * @sdev: sdev the command has been sent to
  54  * @errors: blk error code
  55  *
  56  * Returns SCSI_DH_DEV_OFFLINED if the sdev is on the passive path
  57  */
  58 static int tur_done(struct scsi_device *sdev, unsigned char *sense)
  59 {
  60         struct scsi_sense_hdr sshdr;
  61         int ret;
  62
  63         ret = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
  64         if (!ret) {
  65                 sdev_printk(KERN_WARNING, sdev,
  66                             "%s: sending tur failed, no sense available\n",
  67                             HP_SW_NAME);
  68                 ret = SCSI_DH_IO;
  69                 goto done;
  70         }
  71         switch (sshdr.sense_key) {
  72         case UNIT_ATTENTION:
  73                 ret = SCSI_DH_IMM_RETRY;
  74                 break;
  75         case NOT_READY:
  76                 if ((sshdr.asc == 0x04) && (sshdr.ascq == 2)) {
  77                         /*
  78                          * LUN not ready - Initialization command required
  79                          *
  80                          * This is the passive path
  81                          */
  82                         ret = SCSI_DH_DEV_OFFLINED;
  83                         break;
  84                 }
  85                 /* Fallthrough */
  86         default:
  87                 sdev_printk(KERN_WARNING, sdev,
  88                            "%s: sending tur failed, sense %x/%x/%x\n",
  89                            HP_SW_NAME, sshdr.sense_key, sshdr.asc,
  90                            sshdr.ascq);
  91                 break;
  92         }
  93
  94 done:
  95         return ret;
  96 }
  97
  98 /*
  99  * hp_sw_tur - Send TEST UNIT READY
 100  * @sdev: sdev command should be sent to
 101  *
 102  * Use the TEST UNIT READY command to determine
 103  * the path state.
 104  */
 105 static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 106 {
 107         struct request *req;
 108         int ret;
 109
 110         req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
 111         if (!req)
 112                 return SCSI_DH_RES_TEMP_UNAVAIL;
 113
 114         req->cmd_type = REQ_TYPE_BLOCK_PC;
 115         req->cmd_flags |= REQ_FAILFAST;
 116         req->cmd_len = COMMAND_SIZE(TEST_UNIT_READY);
 117         memset(req->cmd, 0, MAX_COMMAND_SIZE);
 118         req->cmd[0] = TEST_UNIT_READY;
 119         req->timeout = HP_SW_TIMEOUT;
 120         req->sense = h->sense;
 121         memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
 122         req->sense_len = 0;
 123
 124 retry:
 125         ret = blk_execute_rq(req->q, NULL, req, 1);
 126         if (ret == -EIO) {
 127                 if (req->sense_len > 0) {
 128                         ret = tur_done(sdev, h->sense);
 129                 } else {
 130                         sdev_printk(KERN_WARNING, sdev,
 131                                     "%s: sending tur failed with %x\n",
 132                                     HP_SW_NAME, req->errors);
 133                         ret = SCSI_DH_IO;
 134                 }
 135         } else {
 136                 h->path_state = HP_SW_PATH_ACTIVE;
 137                 ret = SCSI_DH_OK;
 138         }
 139         if (ret == SCSI_DH_IMM_RETRY)
 140                 goto retry;
 141         if (ret == SCSI_DH_DEV_OFFLINED) {
 142                 h->path_state = HP_SW_PATH_PASSIVE;
 143                 ret = SCSI_DH_OK;
 144         }
 145
 146         blk_put_request(req);
 147
 148         return ret;
 149 }
 150
 151 /*
 152  * start_done - Handle START STOP UNIT return status
 153  * @sdev: sdev the command has been sent to
 154  * @errors: blk error code
 155  */
 156 static int start_done(struct scsi_device *sdev, unsigned char *sense)
 157 {
 158         struct scsi_sense_hdr sshdr;
 159         int rc;
 160
 161         rc = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
 162         if (!rc) {
 163                 sdev_printk(KERN_WARNING, sdev,
 164                             "%s: sending start_stop_unit failed, "
 165                             "no sense available\n",
 166                             HP_SW_NAME);
 167                 return SCSI_DH_IO;
 168         }
 169         switch (sshdr.sense_key) {
 170         case NOT_READY:
 171                 if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
 172                         /*
 173                          * LUN not ready - manual intervention required
 174                          *
 175                          * Switch-over in progress, retry.
 176                          */
 177                         rc = SCSI_DH_RETRY;
 178                         break;
 179                 }
 180                 /* fall through */
 181         default:
 182                 sdev_printk(KERN_WARNING, sdev,
 183                            "%s: sending start_stop_unit failed, sense %x/%x/%x\n",
 184                            HP_SW_NAME, sshdr.sense_key, sshdr.asc,
 185                            sshdr.ascq);
 186                 rc = SCSI_DH_IO;
 187         }
 188
 189         return rc;
 190 }
 191
 192 /*
 193  * hp_sw_start_stop - Send START STOP UNIT command
 194  * @sdev: sdev command should be sent to
 195  *
 196  * Sending START STOP UNIT activates the SP.
 197  */
 198 static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 199 {
 200         struct request *req;
 201         int ret, retry;
 202
 203         req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
 204         if (!req)
 205                 return SCSI_DH_RES_TEMP_UNAVAIL;
 206
 207         req->cmd_type = REQ_TYPE_BLOCK_PC;
 208         req->cmd_flags |= REQ_FAILFAST;
 209         req->cmd_len = COMMAND_SIZE(START_STOP);
 210         memset(req->cmd, 0, MAX_COMMAND_SIZE);
 211         req->cmd[0] = START_STOP;
 212         req->cmd[4] = 1;        /* Start spin cycle */
 213         req->timeout = HP_SW_TIMEOUT;
 214         req->sense = h->sense;
 215         memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
 216         req->sense_len = 0;
 217         retry = h->retries;
 218
 219 retry:
 220         ret = blk_execute_rq(req->q, NULL, req, 1);
 221         if (ret == -EIO) {
 222                 if (req->sense_len > 0) {
 223                         ret = start_done(sdev, h->sense);
 224                 } else {
 225                         sdev_printk(KERN_WARNING, sdev,
 226                                     "%s: sending start_stop_unit failed with %x\n",
 227                                     HP_SW_NAME, req->errors);
 228                         ret = SCSI_DH_IO;
 229                 }
 230         } else
 231                 ret = SCSI_DH_OK;
 232
 233         if (ret == SCSI_DH_RETRY) {
 234                 if (--retry)
 235                         goto retry;
 236                 ret = SCSI_DH_IO;
 237         }
 238
 239         blk_put_request(req);
 240
 241         return ret;
 242 }
 243
 244 static int hp_sw_prep_fn(struct scsi_device *sdev, struct request *req)
 245 {
 246         struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
 247         int ret = BLKPREP_OK;
 248
 249         if (h->path_state != HP_SW_PATH_ACTIVE) {
 250                 ret = BLKPREP_KILL;
 251                 req->cmd_flags |= REQ_QUIET;
 252         }
 253         return ret;
 254
 255 }
 256
 257 /*
 258  * hp_sw_activate - Activate a path
 259  * @sdev: sdev on the path to be activated
 260  *
 261  * The HP Active/Passive firmware is pretty simple;
 262  * the passive path reports NOT READY with sense codes
 263  * 0x04/0x02; a START STOP UNIT command will then
 264  * activate the passive path (and deactivate the
 265  * previously active one).
 266  */
 267 static int hp_sw_activate(struct scsi_device *sdev)
 268 {
 269         int ret = SCSI_DH_OK;
 270         struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
 271
 272         ret = hp_sw_tur(sdev, h);
 273
 274         if (ret == SCSI_DH_OK && h->path_state == HP_SW_PATH_PASSIVE) {
 275                 ret = hp_sw_start_stop(sdev, h);
 276                 if (ret == SCSI_DH_OK)
 277                         sdev_printk(KERN_INFO, sdev,
 278                                     "%s: activated path\n",
 279                                     HP_SW_NAME);
 280         }
 281
 282         return ret;
 283 }
 284
 285 const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
 286         {"COMPAQ", "MSA1000 VOLUME"},
 287         {"COMPAQ", "HSV110"},
 288         {"HP", "HSV100"},
 289         {"DEC", "HSG80"},
 290         {NULL, NULL},
 291 };
 292
 293 static int hp_sw_bus_attach(struct scsi_device *sdev);
 294 static void hp_sw_bus_detach(struct scsi_device *sdev);
 295
 296 static struct scsi_device_handler hp_sw_dh = {
 297         .name           = HP_SW_NAME,
 298         .module         = THIS_MODULE,
 299         .devlist        = hp_sw_dh_data_list,
 300         .attach         = hp_sw_bus_attach,
 301         .detach         = hp_sw_bus_detach,
 302         .activate       = hp_sw_activate,
 303         .prep_fn        = hp_sw_prep_fn,
 304 };
 305
 306 static int hp_sw_bus_attach(struct scsi_device *sdev)
 307 {
 308         struct scsi_dh_data *scsi_dh_data;
 309         struct hp_sw_dh_data *h;
 310         unsigned long flags;
 311         int ret;
 312
 313         scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
 314                                + sizeof(struct hp_sw_dh_data) , GFP_KERNEL);
 315         if (!scsi_dh_data) {
 316                 sdev_printk(KERN_ERR, sdev, "%s: Attach Failed\n",
 317                             HP_SW_NAME);
 318                 return 0;
 319         }
 320
 321         scsi_dh_data->scsi_dh = &hp_sw_dh;
 322         h = (struct hp_sw_dh_data *) scsi_dh_data->buf;
 323         h->path_state = HP_SW_PATH_UNINITIALIZED;
 324         h->retries = HP_SW_RETRIES;
 325
 326         ret = hp_sw_tur(sdev, h);
 327         if (ret != SCSI_DH_OK || h->path_state == HP_SW_PATH_UNINITIALIZED)
 328                 goto failed;
 329
 330         if (!try_module_get(THIS_MODULE))
 331                 goto failed;
 332
 333         spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 334         sdev->scsi_dh_data = scsi_dh_data;
 335         spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 336
 337         sdev_printk(KERN_INFO, sdev, "%s: attached to %s path\n",
 338                     HP_SW_NAME, h->path_state == HP_SW_PATH_ACTIVE?
 339                     "active":"passive");
 340
 341         return 0;
 342
 343 failed:
 344         kfree(scsi_dh_data);
 345         sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
 346                     HP_SW_NAME);
 347         return -EINVAL;
 348 }
 349
 350 static void hp_sw_bus_detach( struct scsi_device *sdev )
 351 {
 352         struct scsi_dh_data *scsi_dh_data;
 353         unsigned long flags;
 354
 355         spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 356         scsi_dh_data = sdev->scsi_dh_data;
 357         sdev->scsi_dh_data = NULL;
 358         spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 359         module_put(THIS_MODULE);
 360
 361         sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", HP_SW_NAME);
 362
 363         kfree(scsi_dh_data);
 364 }
 365
 366 static int __init hp_sw_init(void)
 367 {
 368         return scsi_register_device_handler(&hp_sw_dh);
 369 }
 370
 371 static void __exit hp_sw_exit(void)
 372 {
 373         scsi_unregister_device_handler(&hp_sw_dh);
 374 }
 375
 376 module_init(hp_sw_init);
 377 module_exit(hp_sw_exit);
 378
 379 MODULE_DESCRIPTION("HP Active/Passive driver");
 380 MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu");
 381 MODULE_LICENSE("GPL");