git.oblomov.eu Git - linux-2.6/blob - drivers/serial/cpm_uart/cpm_uart_core.c

   1 /*
   2  *  linux/drivers/serial/cpm_uart.c
   3  *
   4  *  Driver for CPM (SCC/SMC) serial ports; core driver
   5  *
   6  *  Based on arch/ppc/cpm2_io/uart.c by Dan Malek
   7  *  Based on ppc8xx.c by Thomas Gleixner
   8  *  Based on drivers/serial/amba.c by Russell King
   9  *
  10  *  Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
  11  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
  12  *
  13  *  Copyright (C) 2004, 2007 Freescale Semiconductor, Inc.
  14  *            (C) 2004 Intracom, S.A.
  15  *            (C) 2005-2006 MontaVista Software, Inc.
  16  *              Vitaly Bordug <vbordug@ru.mvista.com>
  17  *
  18  * This program is free software; you can redistribute it and/or modify
  19  * it under the terms of the GNU General Public License as published by
  20  * the Free Software Foundation; either version 2 of the License, or
  21  * (at your option) any later version.
  22  *
  23  * This program is distributed in the hope that it will be useful,
  24  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  25  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  26  * GNU General Public License for more details.
  27  *
  28  * You should have received a copy of the GNU General Public License
  29  * along with this program; if not, write to the Free Software
  30  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  31  *
  32  */
  33
  34 #include <linux/module.h>
  35 #include <linux/tty.h>
  36 #include <linux/ioport.h>
  37 #include <linux/init.h>
  38 #include <linux/serial.h>
  39 #include <linux/console.h>
  40 #include <linux/sysrq.h>
  41 #include <linux/device.h>
  42 #include <linux/bootmem.h>
  43 #include <linux/dma-mapping.h>
  44 #include <linux/fs_uart_pd.h>
  45 #include <linux/of_platform.h>
  46
  47 #include <asm/io.h>
  48 #include <asm/irq.h>
  49 #include <asm/delay.h>
  50 #include <asm/fs_pd.h>
  51 #include <asm/udbg.h>
  52
  53 #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  54 #define SUPPORT_SYSRQ
  55 #endif
  56
  57 #include <linux/serial_core.h>
  58 #include <linux/kernel.h>
  59
  60 #include "cpm_uart.h"
  61
  62
  63 /**************************************************************/
  64
  65 static int  cpm_uart_tx_pump(struct uart_port *port);
  66 static void cpm_uart_init_smc(struct uart_cpm_port *pinfo);
  67 static void cpm_uart_init_scc(struct uart_cpm_port *pinfo);
  68 static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
  69
  70 /**************************************************************/
  71
  72 /*
  73  * Check, if transmit buffers are processed
  74 */
  75 static unsigned int cpm_uart_tx_empty(struct uart_port *port)
  76 {
  77         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
  78         cbd_t __iomem *bdp = pinfo->tx_bd_base;
  79         int ret = 0;
  80
  81         while (1) {
  82                 if (in_be16(&bdp->cbd_sc) & BD_SC_READY)
  83                         break;
  84
  85                 if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) {
  86                         ret = TIOCSER_TEMT;
  87                         break;
  88                 }
  89                 bdp++;
  90         }
  91
  92         pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret);
  93
  94         return ret;
  95 }
  96
  97 static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
  98 {
  99         /* Whee. Do nothing. */
 100 }
 101
 102 static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
 103 {
 104         /* Whee. Do nothing. */
 105         return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
 106 }
 107
 108 /*
 109  * Stop transmitter
 110  */
 111 static void cpm_uart_stop_tx(struct uart_port *port)
 112 {
 113         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 114         smc_t __iomem *smcp = pinfo->smcp;
 115         scc_t __iomem *sccp = pinfo->sccp;
 116
 117         pr_debug("CPM uart[%d]:stop tx\n", port->line);
 118
 119         if (IS_SMC(pinfo))
 120                 clrbits8(&smcp->smc_smcm, SMCM_TX);
 121         else
 122                 clrbits16(&sccp->scc_sccm, UART_SCCM_TX);
 123 }
 124
 125 /*
 126  * Start transmitter
 127  */
 128 static void cpm_uart_start_tx(struct uart_port *port)
 129 {
 130         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 131         smc_t __iomem *smcp = pinfo->smcp;
 132         scc_t __iomem *sccp = pinfo->sccp;
 133
 134         pr_debug("CPM uart[%d]:start tx\n", port->line);
 135
 136         if (IS_SMC(pinfo)) {
 137                 if (in_8(&smcp->smc_smcm) & SMCM_TX)
 138                         return;
 139         } else {
 140                 if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX)
 141                         return;
 142         }
 143
 144         if (cpm_uart_tx_pump(port) != 0) {
 145                 if (IS_SMC(pinfo)) {
 146                         setbits8(&smcp->smc_smcm, SMCM_TX);
 147                 } else {
 148                         setbits16(&sccp->scc_sccm, UART_SCCM_TX);
 149                 }
 150         }
 151 }
 152
 153 /*
 154  * Stop receiver
 155  */
 156 static void cpm_uart_stop_rx(struct uart_port *port)
 157 {
 158         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 159         smc_t __iomem *smcp = pinfo->smcp;
 160         scc_t __iomem *sccp = pinfo->sccp;
 161
 162         pr_debug("CPM uart[%d]:stop rx\n", port->line);
 163
 164         if (IS_SMC(pinfo))
 165                 clrbits8(&smcp->smc_smcm, SMCM_RX);
 166         else
 167                 clrbits16(&sccp->scc_sccm, UART_SCCM_RX);
 168 }
 169
 170 /*
 171  * Enable Modem status interrupts
 172  */
 173 static void cpm_uart_enable_ms(struct uart_port *port)
 174 {
 175         pr_debug("CPM uart[%d]:enable ms\n", port->line);
 176 }
 177
 178 /*
 179  * Generate a break.
 180  */
 181 static void cpm_uart_break_ctl(struct uart_port *port, int break_state)
 182 {
 183         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 184
 185         pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line,
 186                 break_state);
 187
 188         if (break_state)
 189                 cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
 190         else
 191                 cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX);
 192 }
 193
 194 /*
 195  * Transmit characters, refill buffer descriptor, if possible
 196  */
 197 static void cpm_uart_int_tx(struct uart_port *port)
 198 {
 199         pr_debug("CPM uart[%d]:TX INT\n", port->line);
 200
 201         cpm_uart_tx_pump(port);
 202 }
 203
 204 #ifdef CONFIG_CONSOLE_POLL
 205 static int serial_polled;
 206 #endif
 207
 208 /*
 209  * Receive characters
 210  */
 211 static void cpm_uart_int_rx(struct uart_port *port)
 212 {
 213         int i;
 214         unsigned char ch;
 215         u8 *cp;
 216         struct tty_struct *tty = port->info->port.tty;
 217         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 218         cbd_t __iomem *bdp;
 219         u16 status;
 220         unsigned int flg;
 221
 222         pr_debug("CPM uart[%d]:RX INT\n", port->line);
 223
 224         /* Just loop through the closed BDs and copy the characters into
 225          * the buffer.
 226          */
 227         bdp = pinfo->rx_cur;
 228         for (;;) {
 229 #ifdef CONFIG_CONSOLE_POLL
 230                 if (unlikely(serial_polled)) {
 231                         serial_polled = 0;
 232                         return;
 233                 }
 234 #endif
 235                 /* get status */
 236                 status = in_be16(&bdp->cbd_sc);
 237                 /* If this one is empty, return happy */
 238                 if (status & BD_SC_EMPTY)
 239                         break;
 240
 241                 /* get number of characters, and check spce in flip-buffer */
 242                 i = in_be16(&bdp->cbd_datlen);
 243
 244                 /* If we have not enough room in tty flip buffer, then we try
 245                  * later, which will be the next rx-interrupt or a timeout
 246                  */
 247                 if(tty_buffer_request_room(tty, i) < i) {
 248                         printk(KERN_WARNING "No room in flip buffer\n");
 249                         return;
 250                 }
 251
 252                 /* get pointer */
 253                 cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
 254
 255                 /* loop through the buffer */
 256                 while (i-- > 0) {
 257                         ch = *cp++;
 258                         port->icount.rx++;
 259                         flg = TTY_NORMAL;
 260
 261                         if (status &
 262                             (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
 263                                 goto handle_error;
 264                         if (uart_handle_sysrq_char(port, ch))
 265                                 continue;
 266 #ifdef CONFIG_CONSOLE_POLL
 267                         if (unlikely(serial_polled)) {
 268                                 serial_polled = 0;
 269                                 return;
 270                         }
 271 #endif
 272                       error_return:
 273                         tty_insert_flip_char(tty, ch, flg);
 274
 275                 }               /* End while (i--) */
 276
 277                 /* This BD is ready to be used again. Clear status. get next */
 278                 clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR |
 279                                         BD_SC_OV | BD_SC_ID);
 280                 setbits16(&bdp->cbd_sc, BD_SC_EMPTY);
 281
 282                 if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
 283                         bdp = pinfo->rx_bd_base;
 284                 else
 285                         bdp++;
 286
 287         } /* End for (;;) */
 288
 289         /* Write back buffer pointer */
 290         pinfo->rx_cur = bdp;
 291
 292         /* activate BH processing */
 293         tty_flip_buffer_push(tty);
 294
 295         return;
 296
 297         /* Error processing */
 298
 299       handle_error:
 300         /* Statistics */
 301         if (status & BD_SC_BR)
 302                 port->icount.brk++;
 303         if (status & BD_SC_PR)
 304                 port->icount.parity++;
 305         if (status & BD_SC_FR)
 306                 port->icount.frame++;
 307         if (status & BD_SC_OV)
 308                 port->icount.overrun++;
 309
 310         /* Mask out ignored conditions */
 311         status &= port->read_status_mask;
 312
 313         /* Handle the remaining ones */
 314         if (status & BD_SC_BR)
 315                 flg = TTY_BREAK;
 316         else if (status & BD_SC_PR)
 317                 flg = TTY_PARITY;
 318         else if (status & BD_SC_FR)
 319                 flg = TTY_FRAME;
 320
 321         /* overrun does not affect the current character ! */
 322         if (status & BD_SC_OV) {
 323                 ch = 0;
 324                 flg = TTY_OVERRUN;
 325                 /* We skip this buffer */
 326                 /* CHECK: Is really nothing senseful there */
 327                 /* ASSUMPTION: it contains nothing valid */
 328                 i = 0;
 329         }
 330 #ifdef SUPPORT_SYSRQ
 331         port->sysrq = 0;
 332 #endif
 333         goto error_return;
 334 }
 335
 336 /*
 337  * Asynchron mode interrupt handler
 338  */
 339 static irqreturn_t cpm_uart_int(int irq, void *data)
 340 {
 341         u8 events;
 342         struct uart_port *port = data;
 343         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 344         smc_t __iomem *smcp = pinfo->smcp;
 345         scc_t __iomem *sccp = pinfo->sccp;
 346
 347         pr_debug("CPM uart[%d]:IRQ\n", port->line);
 348
 349         if (IS_SMC(pinfo)) {
 350                 events = in_8(&smcp->smc_smce);
 351                 out_8(&smcp->smc_smce, events);
 352                 if (events & SMCM_BRKE)
 353                         uart_handle_break(port);
 354                 if (events & SMCM_RX)
 355                         cpm_uart_int_rx(port);
 356                 if (events & SMCM_TX)
 357                         cpm_uart_int_tx(port);
 358         } else {
 359                 events = in_be16(&sccp->scc_scce);
 360                 out_be16(&sccp->scc_scce, events);
 361                 if (events & UART_SCCM_BRKE)
 362                         uart_handle_break(port);
 363                 if (events & UART_SCCM_RX)
 364                         cpm_uart_int_rx(port);
 365                 if (events & UART_SCCM_TX)
 366                         cpm_uart_int_tx(port);
 367         }
 368         return (events) ? IRQ_HANDLED : IRQ_NONE;
 369 }
 370
 371 static int cpm_uart_startup(struct uart_port *port)
 372 {
 373         int retval;
 374         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 375
 376         pr_debug("CPM uart[%d]:startup\n", port->line);
 377
 378         /* Install interrupt handler. */
 379         retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
 380         if (retval)
 381                 return retval;
 382
 383         /* Startup rx-int */
 384         if (IS_SMC(pinfo)) {
 385                 setbits8(&pinfo->smcp->smc_smcm, SMCM_RX);
 386                 setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN));
 387         } else {
 388                 setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
 389                 setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
 390         }
 391
 392         if (!(pinfo->flags & FLAG_CONSOLE))
 393                 cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
 394         return 0;
 395 }
 396
 397 inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo)
 398 {
 399         set_current_state(TASK_UNINTERRUPTIBLE);
 400         schedule_timeout(pinfo->wait_closing);
 401 }
 402
 403 /*
 404  * Shutdown the uart
 405  */
 406 static void cpm_uart_shutdown(struct uart_port *port)
 407 {
 408         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 409
 410         pr_debug("CPM uart[%d]:shutdown\n", port->line);
 411
 412         /* free interrupt handler */
 413         free_irq(port->irq, port);
 414
 415         /* If the port is not the console, disable Rx and Tx. */
 416         if (!(pinfo->flags & FLAG_CONSOLE)) {
 417                 /* Wait for all the BDs marked sent */
 418                 while(!cpm_uart_tx_empty(port)) {
 419                         set_current_state(TASK_UNINTERRUPTIBLE);
 420                         schedule_timeout(2);
 421                 }
 422
 423                 if (pinfo->wait_closing)
 424                         cpm_uart_wait_until_send(pinfo);
 425
 426                 /* Stop uarts */
 427                 if (IS_SMC(pinfo)) {
 428                         smc_t __iomem *smcp = pinfo->smcp;
 429                         clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
 430                         clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX);
 431                 } else {
 432                         scc_t __iomem *sccp = pinfo->sccp;
 433                         clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 434                         clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
 435                 }
 436
 437                 /* Shut them really down and reinit buffer descriptors */
 438                 if (IS_SMC(pinfo)) {
 439                         out_be16(&pinfo->smcup->smc_brkcr, 0);
 440                         cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
 441                 } else {
 442                         out_be16(&pinfo->sccup->scc_brkcr, 0);
 443                         cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
 444                 }
 445
 446                 cpm_uart_initbd(pinfo);
 447         }
 448 }
 449
 450 static void cpm_uart_set_termios(struct uart_port *port,
 451                                  struct ktermios *termios,
 452                                  struct ktermios *old)
 453 {
 454         int baud;
 455         unsigned long flags;
 456         u16 cval, scval, prev_mode;
 457         int bits, sbits;
 458         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 459         smc_t __iomem *smcp = pinfo->smcp;
 460         scc_t __iomem *sccp = pinfo->sccp;
 461
 462         pr_debug("CPM uart[%d]:set_termios\n", port->line);
 463
 464         baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
 465
 466         /* Character length programmed into the mode register is the
 467          * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
 468          * 1 or 2 stop bits, minus 1.
 469          * The value 'bits' counts this for us.
 470          */
 471         cval = 0;
 472         scval = 0;
 473
 474         /* byte size */
 475         switch (termios->c_cflag & CSIZE) {
 476         case CS5:
 477                 bits = 5;
 478                 break;
 479         case CS6:
 480                 bits = 6;
 481                 break;
 482         case CS7:
 483                 bits = 7;
 484                 break;
 485         case CS8:
 486                 bits = 8;
 487                 break;
 488                 /* Never happens, but GCC is too dumb to figure it out */
 489         default:
 490                 bits = 8;
 491                 break;
 492         }
 493         sbits = bits - 5;
 494
 495         if (termios->c_cflag & CSTOPB) {
 496                 cval |= SMCMR_SL;       /* Two stops */
 497                 scval |= SCU_PSMR_SL;
 498                 bits++;
 499         }
 500
 501         if (termios->c_cflag & PARENB) {
 502                 cval |= SMCMR_PEN;
 503                 scval |= SCU_PSMR_PEN;
 504                 bits++;
 505                 if (!(termios->c_cflag & PARODD)) {
 506                         cval |= SMCMR_PM_EVEN;
 507                         scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP);
 508                 }
 509         }
 510
 511         /*
 512          * Update the timeout
 513          */
 514         uart_update_timeout(port, termios->c_cflag, baud);
 515
 516         /*
 517          * Set up parity check flag
 518          */
 519 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
 520
 521         port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
 522         if (termios->c_iflag & INPCK)
 523                 port->read_status_mask |= BD_SC_FR | BD_SC_PR;
 524         if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK))
 525                 port->read_status_mask |= BD_SC_BR;
 526
 527         /*
 528          * Characters to ignore
 529          */
 530         port->ignore_status_mask = 0;
 531         if (termios->c_iflag & IGNPAR)
 532                 port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
 533         if (termios->c_iflag & IGNBRK) {
 534                 port->ignore_status_mask |= BD_SC_BR;
 535                 /*
 536                  * If we're ignore parity and break indicators, ignore
 537                  * overruns too.  (For real raw support).
 538                  */
 539                 if (termios->c_iflag & IGNPAR)
 540                         port->ignore_status_mask |= BD_SC_OV;
 541         }
 542         /*
 543          * !!! ignore all characters if CREAD is not set
 544          */
 545         if ((termios->c_cflag & CREAD) == 0)
 546                 port->read_status_mask &= ~BD_SC_EMPTY;
 547
 548         spin_lock_irqsave(&port->lock, flags);
 549
 550         /* Start bit has not been added (so don't, because we would just
 551          * subtract it later), and we need to add one for the number of
 552          * stops bits (there is always at least one).
 553          */
 554         bits++;
 555         if (IS_SMC(pinfo)) {
 556                 /* Set the mode register.  We want to keep a copy of the
 557                  * enables, because we want to put them back if they were
 558                  * present.
 559                  */
 560                 prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN);
 561                 /* Output in *one* operation, so we don't interrupt RX/TX if they
 562                  * were already enabled. */
 563                 out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval |
 564                     SMCMR_SM_UART | prev_mode);
 565         } else {
 566                 out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
 567         }
 568
 569         cpm_set_brg(pinfo->brg - 1, baud);
 570         spin_unlock_irqrestore(&port->lock, flags);
 571 }
 572
 573 static const char *cpm_uart_type(struct uart_port *port)
 574 {
 575         pr_debug("CPM uart[%d]:uart_type\n", port->line);
 576
 577         return port->type == PORT_CPM ? "CPM UART" : NULL;
 578 }
 579
 580 /*
 581  * verify the new serial_struct (for TIOCSSERIAL).
 582  */
 583 static int cpm_uart_verify_port(struct uart_port *port,
 584                                 struct serial_struct *ser)
 585 {
 586         int ret = 0;
 587
 588         pr_debug("CPM uart[%d]:verify_port\n", port->line);
 589
 590         if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
 591                 ret = -EINVAL;
 592         if (ser->irq < 0 || ser->irq >= NR_IRQS)
 593                 ret = -EINVAL;
 594         if (ser->baud_base < 9600)
 595                 ret = -EINVAL;
 596         return ret;
 597 }
 598
 599 /*
 600  * Transmit characters, refill buffer descriptor, if possible
 601  */
 602 static int cpm_uart_tx_pump(struct uart_port *port)
 603 {
 604         cbd_t __iomem *bdp;
 605         u8 *p;
 606         int count;
 607         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 608         struct circ_buf *xmit = &port->info->xmit;
 609
 610         /* Handle xon/xoff */
 611         if (port->x_char) {
 612                 /* Pick next descriptor and fill from buffer */
 613                 bdp = pinfo->tx_cur;
 614
 615                 p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
 616
 617                 *p++ = port->x_char;
 618
 619                 out_be16(&bdp->cbd_datlen, 1);
 620                 setbits16(&bdp->cbd_sc, BD_SC_READY);
 621                 /* Get next BD. */
 622                 if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
 623                         bdp = pinfo->tx_bd_base;
 624                 else
 625                         bdp++;
 626                 pinfo->tx_cur = bdp;
 627
 628                 port->icount.tx++;
 629                 port->x_char = 0;
 630                 return 1;
 631         }
 632
 633         if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 634                 cpm_uart_stop_tx(port);
 635                 return 0;
 636         }
 637
 638         /* Pick next descriptor and fill from buffer */
 639         bdp = pinfo->tx_cur;
 640
 641         while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) &&
 642                xmit->tail != xmit->head) {
 643                 count = 0;
 644                 p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
 645                 while (count < pinfo->tx_fifosize) {
 646                         *p++ = xmit->buf[xmit->tail];
 647                         xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 648                         port->icount.tx++;
 649                         count++;
 650                         if (xmit->head == xmit->tail)
 651                                 break;
 652                 }
 653                 out_be16(&bdp->cbd_datlen, count);
 654                 setbits16(&bdp->cbd_sc, BD_SC_READY);
 655                 /* Get next BD. */
 656                 if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
 657                         bdp = pinfo->tx_bd_base;
 658                 else
 659                         bdp++;
 660         }
 661         pinfo->tx_cur = bdp;
 662
 663         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 664                 uart_write_wakeup(port);
 665
 666         if (uart_circ_empty(xmit)) {
 667                 cpm_uart_stop_tx(port);
 668                 return 0;
 669         }
 670
 671         return 1;
 672 }
 673
 674 /*
 675  * init buffer descriptors
 676  */
 677 static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 678 {
 679         int i;
 680         u8 *mem_addr;
 681         cbd_t __iomem *bdp;
 682
 683         pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line);
 684
 685         /* Set the physical address of the host memory
 686          * buffers in the buffer descriptors, and the
 687          * virtual address for us to work with.
 688          */
 689         mem_addr = pinfo->mem_addr;
 690         bdp = pinfo->rx_cur = pinfo->rx_bd_base;
 691         for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
 692                 out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
 693                 out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT);
 694                 mem_addr += pinfo->rx_fifosize;
 695         }
 696
 697         out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
 698         out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
 699
 700         /* Set the physical address of the host memory
 701          * buffers in the buffer descriptors, and the
 702          * virtual address for us to work with.
 703          */
 704         mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
 705         bdp = pinfo->tx_cur = pinfo->tx_bd_base;
 706         for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
 707                 out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
 708                 out_be16(&bdp->cbd_sc, BD_SC_INTRPT);
 709                 mem_addr += pinfo->tx_fifosize;
 710         }
 711
 712         out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
 713         out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT);
 714 }
 715
 716 static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 717 {
 718         scc_t __iomem *scp;
 719         scc_uart_t __iomem *sup;
 720
 721         pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line);
 722
 723         scp = pinfo->sccp;
 724         sup = pinfo->sccup;
 725
 726         /* Store address */
 727         out_be16(&pinfo->sccup->scc_genscc.scc_rbase,
 728                  (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
 729         out_be16(&pinfo->sccup->scc_genscc.scc_tbase,
 730                  (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
 731
 732         /* Set up the uart parameters in the
 733          * parameter ram.
 734          */
 735
 736         cpm_set_scc_fcr(sup);
 737
 738         out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
 739         out_be16(&sup->scc_maxidl, pinfo->rx_fifosize);
 740         out_be16(&sup->scc_brkcr, 1);
 741         out_be16(&sup->scc_parec, 0);
 742         out_be16(&sup->scc_frmec, 0);
 743         out_be16(&sup->scc_nosec, 0);
 744         out_be16(&sup->scc_brkec, 0);
 745         out_be16(&sup->scc_uaddr1, 0);
 746         out_be16(&sup->scc_uaddr2, 0);
 747         out_be16(&sup->scc_toseq, 0);
 748         out_be16(&sup->scc_char1, 0x8000);
 749         out_be16(&sup->scc_char2, 0x8000);
 750         out_be16(&sup->scc_char3, 0x8000);
 751         out_be16(&sup->scc_char4, 0x8000);
 752         out_be16(&sup->scc_char5, 0x8000);
 753         out_be16(&sup->scc_char6, 0x8000);
 754         out_be16(&sup->scc_char7, 0x8000);
 755         out_be16(&sup->scc_char8, 0x8000);
 756         out_be16(&sup->scc_rccm, 0xc0ff);
 757
 758         /* Send the CPM an initialize command.
 759          */
 760         cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
 761
 762         /* Set UART mode, 8 bit, no parity, one stop.
 763          * Enable receive and transmit.
 764          */
 765         out_be32(&scp->scc_gsmrh, 0);
 766         out_be32(&scp->scc_gsmrl,
 767                  SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
 768
 769         /* Enable rx interrupts  and clear all pending events.  */
 770         out_be16(&scp->scc_sccm, 0);
 771         out_be16(&scp->scc_scce, 0xffff);
 772         out_be16(&scp->scc_dsr, 0x7e7e);
 773         out_be16(&scp->scc_psmr, 0x3000);
 774
 775         setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 776 }
 777
 778 static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 779 {
 780         smc_t __iomem *sp;
 781         smc_uart_t __iomem *up;
 782
 783         pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line);
 784
 785         sp = pinfo->smcp;
 786         up = pinfo->smcup;
 787
 788         /* Store address */
 789         out_be16(&pinfo->smcup->smc_rbase,
 790                  (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
 791         out_be16(&pinfo->smcup->smc_tbase,
 792                  (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
 793
 794 /*
 795  *  In case SMC1 is being relocated...
 796  */
 797 #if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
 798         out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase));
 799         out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase));
 800         out_be32(&up->smc_rstate, 0);
 801         out_be32(&up->smc_tstate, 0);
 802         out_be16(&up->smc_brkcr, 1);              /* number of break chars */
 803         out_be16(&up->smc_brkec, 0);
 804 #endif
 805
 806         /* Set up the uart parameters in the
 807          * parameter ram.
 808          */
 809         cpm_set_smc_fcr(up);
 810
 811         /* Using idle charater time requires some additional tuning.  */
 812         out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
 813         out_be16(&up->smc_maxidl, pinfo->rx_fifosize);
 814         out_be16(&up->smc_brklen, 0);
 815         out_be16(&up->smc_brkec, 0);
 816         out_be16(&up->smc_brkcr, 1);
 817
 818         cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
 819
 820         /* Set UART mode, 8 bit, no parity, one stop.
 821          * Enable receive and transmit.
 822          */
 823         out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART);
 824
 825         /* Enable only rx interrupts clear all pending events. */
 826         out_8(&sp->smc_smcm, 0);
 827         out_8(&sp->smc_smce, 0xff);
 828
 829         setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
 830 }
 831
 832 /*
 833  * Initialize port. This is called from early_console stuff
 834  * so we have to be careful here !
 835  */
 836 static int cpm_uart_request_port(struct uart_port *port)
 837 {
 838         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 839         int ret;
 840
 841         pr_debug("CPM uart[%d]:request port\n", port->line);
 842
 843         if (pinfo->flags & FLAG_CONSOLE)
 844                 return 0;
 845
 846         if (IS_SMC(pinfo)) {
 847                 clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
 848                 clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
 849         } else {
 850                 clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
 851                 clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 852         }
 853
 854         ret = cpm_uart_allocbuf(pinfo, 0);
 855
 856         if (ret)
 857                 return ret;
 858
 859         cpm_uart_initbd(pinfo);
 860         if (IS_SMC(pinfo))
 861                 cpm_uart_init_smc(pinfo);
 862         else
 863                 cpm_uart_init_scc(pinfo);
 864
 865         return 0;
 866 }
 867
 868 static void cpm_uart_release_port(struct uart_port *port)
 869 {
 870         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 871
 872         if (!(pinfo->flags & FLAG_CONSOLE))
 873                 cpm_uart_freebuf(pinfo);
 874 }
 875
 876 /*
 877  * Configure/autoconfigure the port.
 878  */
 879 static void cpm_uart_config_port(struct uart_port *port, int flags)
 880 {
 881         pr_debug("CPM uart[%d]:config_port\n", port->line);
 882
 883         if (flags & UART_CONFIG_TYPE) {
 884                 port->type = PORT_CPM;
 885                 cpm_uart_request_port(port);
 886         }
 887 }
 888
 889 #ifdef CONFIG_CONSOLE_POLL
 890 /* Serial polling routines for writing and reading from the uart while
 891  * in an interrupt or debug context.
 892  */
 893
 894 #define GDB_BUF_SIZE    512     /* power of 2, please */
 895
 896 static char poll_buf[GDB_BUF_SIZE];
 897 static char *pollp;
 898 static int poll_chars;
 899
 900 static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo)
 901 {
 902         u_char          c, *cp;
 903         volatile cbd_t  *bdp;
 904         int             i;
 905
 906         /* Get the address of the host memory buffer.
 907          */
 908         bdp = pinfo->rx_cur;
 909         while (bdp->cbd_sc & BD_SC_EMPTY)
 910                 ;
 911
 912         /* If the buffer address is in the CPM DPRAM, don't
 913          * convert it.
 914          */
 915         cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 916
 917         if (obuf) {
 918                 i = c = bdp->cbd_datlen;
 919                 while (i-- > 0)
 920                         *obuf++ = *cp++;
 921         } else
 922                 c = *cp;
 923         bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
 924         bdp->cbd_sc |= BD_SC_EMPTY;
 925
 926         if (bdp->cbd_sc & BD_SC_WRAP)
 927                 bdp = pinfo->rx_bd_base;
 928         else
 929                 bdp++;
 930         pinfo->rx_cur = (cbd_t *)bdp;
 931
 932         return (int)c;
 933 }
 934
 935 static int cpm_get_poll_char(struct uart_port *port)
 936 {
 937         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 938
 939         if (!serial_polled) {
 940                 serial_polled = 1;
 941                 poll_chars = 0;
 942         }
 943         if (poll_chars <= 0) {
 944                 poll_chars = poll_wait_key(poll_buf, pinfo);
 945                 pollp = poll_buf;
 946         }
 947         poll_chars--;
 948         return *pollp++;
 949 }
 950
 951 static void cpm_put_poll_char(struct uart_port *port,
 952                          unsigned char c)
 953 {
 954         struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 955         static char ch[2];
 956
 957         ch[0] = (char)c;
 958         cpm_uart_early_write(pinfo->port.line, ch, 1);
 959 }
 960 #endif /* CONFIG_CONSOLE_POLL */
 961
 962 static struct uart_ops cpm_uart_pops = {
 963         .tx_empty       = cpm_uart_tx_empty,
 964         .set_mctrl      = cpm_uart_set_mctrl,
 965         .get_mctrl      = cpm_uart_get_mctrl,
 966         .stop_tx        = cpm_uart_stop_tx,
 967         .start_tx       = cpm_uart_start_tx,
 968         .stop_rx        = cpm_uart_stop_rx,
 969         .enable_ms      = cpm_uart_enable_ms,
 970         .break_ctl      = cpm_uart_break_ctl,
 971         .startup        = cpm_uart_startup,
 972         .shutdown       = cpm_uart_shutdown,
 973         .set_termios    = cpm_uart_set_termios,
 974         .type           = cpm_uart_type,
 975         .release_port   = cpm_uart_release_port,
 976         .request_port   = cpm_uart_request_port,
 977         .config_port    = cpm_uart_config_port,
 978         .verify_port    = cpm_uart_verify_port,
 979 #ifdef CONFIG_CONSOLE_POLL
 980         .poll_get_char = cpm_get_poll_char,
 981         .poll_put_char = cpm_put_poll_char,
 982 #endif
 983 };
 984
 985 struct uart_cpm_port cpm_uart_ports[UART_NR];
 986
 987 static int cpm_uart_init_port(struct device_node *np,
 988                               struct uart_cpm_port *pinfo)
 989 {
 990         const u32 *data;
 991         void __iomem *mem, *pram;
 992         int len;
 993         int ret;
 994
 995         data = of_get_property(np, "fsl,cpm-brg", &len);
 996         if (!data || len != 4) {
 997                 printk(KERN_ERR "CPM UART %s has no/invalid "
 998                                 "fsl,cpm-brg property.\n", np->name);
 999                 return -EINVAL;
1000         }
1001         pinfo->brg = *data;
1002
1003         data = of_get_property(np, "fsl,cpm-command", &len);
1004         if (!data || len != 4) {
1005                 printk(KERN_ERR "CPM UART %s has no/invalid "
1006                                 "fsl,cpm-command property.\n", np->name);
1007                 return -EINVAL;
1008         }
1009         pinfo->command = *data;
1010
1011         mem = of_iomap(np, 0);
1012         if (!mem)
1013                 return -ENOMEM;
1014
1015         if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") ||
1016             of_device_is_compatible(np, "fsl,cpm2-scc-uart")) {
1017                 pinfo->sccp = mem;
1018                 pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np);
1019         } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") ||
1020                    of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
1021                 pinfo->flags |= FLAG_SMC;
1022                 pinfo->smcp = mem;
1023                 pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np);
1024         } else {
1025                 ret = -ENODEV;
1026                 goto out_mem;
1027         }
1028
1029         if (!pram) {
1030                 ret = -ENOMEM;
1031                 goto out_mem;
1032         }
1033
1034         pinfo->tx_nrfifos = TX_NUM_FIFO;
1035         pinfo->tx_fifosize = TX_BUF_SIZE;
1036         pinfo->rx_nrfifos = RX_NUM_FIFO;
1037         pinfo->rx_fifosize = RX_BUF_SIZE;
1038
1039         pinfo->port.uartclk = ppc_proc_freq;
1040         pinfo->port.mapbase = (unsigned long)mem;
1041         pinfo->port.type = PORT_CPM;
1042         pinfo->port.ops = &cpm_uart_pops,
1043         pinfo->port.iotype = UPIO_MEM;
1044         pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize;
1045         spin_lock_init(&pinfo->port.lock);
1046
1047         pinfo->port.irq = of_irq_to_resource(np, 0, NULL);
1048         if (pinfo->port.irq == NO_IRQ) {
1049                 ret = -EINVAL;
1050                 goto out_pram;
1051         }
1052
1053         return cpm_uart_request_port(&pinfo->port);
1054
1055 out_pram:
1056         cpm_uart_unmap_pram(pinfo, pram);
1057 out_mem:
1058         iounmap(mem);
1059         return ret;
1060 }
1061
1062 #ifdef CONFIG_SERIAL_CPM_CONSOLE
1063 /*
1064  *      Print a string to the serial port trying not to disturb
1065  *      any possible real use of the port...
1066  *
1067  *      Note that this is called with interrupts already disabled
1068  */
1069 static void cpm_uart_console_write(struct console *co, const char *s,
1070                                    u_int count)
1071 {
1072         struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
1073         unsigned int i;
1074         cbd_t __iomem *bdp, *bdbase;
1075         unsigned char *cp;
1076         unsigned long flags;
1077         int nolock = oops_in_progress;
1078
1079         if (unlikely(nolock)) {
1080                 local_irq_save(flags);
1081         } else {
1082                 spin_lock_irqsave(&pinfo->port.lock, flags);
1083         }
1084
1085         /* Get the address of the host memory buffer.
1086          */
1087         bdp = pinfo->tx_cur;
1088         bdbase = pinfo->tx_bd_base;
1089
1090         /*
1091          * Now, do each character.  This is not as bad as it looks
1092          * since this is a holding FIFO and not a transmitting FIFO.
1093          * We could add the complexity of filling the entire transmit
1094          * buffer, but we would just wait longer between accesses......
1095          */
1096         for (i = 0; i < count; i++, s++) {
1097                 /* Wait for transmitter fifo to empty.
1098                  * Ready indicates output is ready, and xmt is doing
1099                  * that, not that it is ready for us to send.
1100                  */
1101                 while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
1102                         ;
1103
1104                 /* Send the character out.
1105                  * If the buffer address is in the CPM DPRAM, don't
1106                  * convert it.
1107                  */
1108                 cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
1109                 *cp = *s;
1110
1111                 out_be16(&bdp->cbd_datlen, 1);
1112                 setbits16(&bdp->cbd_sc, BD_SC_READY);
1113
1114                 if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
1115                         bdp = bdbase;
1116                 else
1117                         bdp++;
1118
1119                 /* if a LF, also do CR... */
1120                 if (*s == 10) {
1121                         while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
1122                                 ;
1123
1124                         cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
1125                         *cp = 13;
1126
1127                         out_be16(&bdp->cbd_datlen, 1);
1128                         setbits16(&bdp->cbd_sc, BD_SC_READY);
1129
1130                         if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
1131                                 bdp = bdbase;
1132                         else
1133                                 bdp++;
1134                 }
1135         }
1136
1137         /*
1138          * Finally, Wait for transmitter & holding register to empty
1139          *  and restore the IER
1140          */
1141         while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
1142                 ;
1143
1144         pinfo->tx_cur = bdp;
1145
1146         if (unlikely(nolock)) {
1147                 local_irq_restore(flags);
1148         } else {
1149                 spin_unlock_irqrestore(&pinfo->port.lock, flags);
1150         }
1151 }
1152
1153
1154 static int __init cpm_uart_console_setup(struct console *co, char *options)
1155 {
1156         int baud = 38400;
1157         int bits = 8;
1158         int parity = 'n';
1159         int flow = 'n';
1160         int ret;
1161         struct uart_cpm_port *pinfo;
1162         struct uart_port *port;
1163
1164         struct device_node *np = NULL;
1165         int i = 0;
1166
1167         if (co->index >= UART_NR) {
1168                 printk(KERN_ERR "cpm_uart: console index %d too high\n",
1169                        co->index);
1170                 return -ENODEV;
1171         }
1172
1173         do {
1174                 np = of_find_node_by_type(np, "serial");
1175                 if (!np)
1176                         return -ENODEV;
1177
1178                 if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") &&
1179                     !of_device_is_compatible(np, "fsl,cpm1-scc-uart") &&
1180                     !of_device_is_compatible(np, "fsl,cpm2-smc-uart") &&
1181                     !of_device_is_compatible(np, "fsl,cpm2-scc-uart"))
1182                         i--;
1183         } while (i++ != co->index);
1184
1185         pinfo = &cpm_uart_ports[co->index];
1186
1187         pinfo->flags |= FLAG_CONSOLE;
1188         port = &pinfo->port;
1189
1190         ret = cpm_uart_init_port(np, pinfo);
1191         of_node_put(np);
1192         if (ret)
1193                 return ret;
1194
1195         if (options) {
1196                 uart_parse_options(options, &baud, &parity, &bits, &flow);
1197         } else {
1198                 if ((baud = uart_baudrate()) == -1)
1199                         baud = 9600;
1200         }
1201
1202 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
1203         udbg_putc = NULL;
1204 #endif
1205
1206         if (IS_SMC(pinfo)) {
1207                 out_be16(&pinfo->smcup->smc_brkcr, 0);
1208                 cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
1209                 clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
1210                 clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
1211         } else {
1212                 out_be16(&pinfo->sccup->scc_brkcr, 0);
1213                 cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
1214                 clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
1215                 clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
1216         }
1217
1218         ret = cpm_uart_allocbuf(pinfo, 1);
1219
1220         if (ret)
1221                 return ret;
1222
1223         cpm_uart_initbd(pinfo);
1224
1225         if (IS_SMC(pinfo))
1226                 cpm_uart_init_smc(pinfo);
1227         else
1228                 cpm_uart_init_scc(pinfo);
1229
1230         uart_set_options(port, co, baud, parity, bits, flow);
1231         cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX);
1232
1233         return 0;
1234 }
1235
1236 static struct uart_driver cpm_reg;
1237 static struct console cpm_scc_uart_console = {
1238         .name           = "ttyCPM",
1239         .write          = cpm_uart_console_write,
1240         .device         = uart_console_device,
1241         .setup          = cpm_uart_console_setup,
1242         .flags          = CON_PRINTBUFFER,
1243         .index          = -1,
1244         .data           = &cpm_reg,
1245 };
1246
1247 static int __init cpm_uart_console_init(void)
1248 {
1249         register_console(&cpm_scc_uart_console);
1250         return 0;
1251 }
1252
1253 console_initcall(cpm_uart_console_init);
1254
1255 #define CPM_UART_CONSOLE        &cpm_scc_uart_console
1256 #else
1257 #define CPM_UART_CONSOLE        NULL
1258 #endif
1259
1260 static struct uart_driver cpm_reg = {
1261         .owner          = THIS_MODULE,
1262         .driver_name    = "ttyCPM",
1263         .dev_name       = "ttyCPM",
1264         .major          = SERIAL_CPM_MAJOR,
1265         .minor          = SERIAL_CPM_MINOR,
1266         .cons           = CPM_UART_CONSOLE,
1267         .nr             = UART_NR,
1268 };
1269
1270 static int probe_index;
1271
1272 static int __devinit cpm_uart_probe(struct of_device *ofdev,
1273                                     const struct of_device_id *match)
1274 {
1275         int index = probe_index++;
1276         struct uart_cpm_port *pinfo = &cpm_uart_ports[index];
1277         int ret;
1278
1279         pinfo->port.line = index;
1280
1281         if (index >= UART_NR)
1282                 return -ENODEV;
1283
1284         dev_set_drvdata(&ofdev->dev, pinfo);
1285
1286         ret = cpm_uart_init_port(ofdev->node, pinfo);
1287         if (ret)
1288                 return ret;
1289
1290         return uart_add_one_port(&cpm_reg, &pinfo->port);
1291 }
1292
1293 static int __devexit cpm_uart_remove(struct of_device *ofdev)
1294 {
1295         struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev);
1296         return uart_remove_one_port(&cpm_reg, &pinfo->port);
1297 }
1298
1299 static struct of_device_id cpm_uart_match[] = {
1300         {
1301                 .compatible = "fsl,cpm1-smc-uart",
1302         },
1303         {
1304                 .compatible = "fsl,cpm1-scc-uart",
1305         },
1306         {
1307                 .compatible = "fsl,cpm2-smc-uart",
1308         },
1309         {
1310                 .compatible = "fsl,cpm2-scc-uart",
1311         },
1312         {}
1313 };
1314
1315 static struct of_platform_driver cpm_uart_driver = {
1316         .name = "cpm_uart",
1317         .match_table = cpm_uart_match,
1318         .probe = cpm_uart_probe,
1319         .remove = cpm_uart_remove,
1320  };
1321
1322 static int __init cpm_uart_init(void)
1323 {
1324         int ret = uart_register_driver(&cpm_reg);
1325         if (ret)
1326                 return ret;
1327
1328         ret = of_register_platform_driver(&cpm_uart_driver);
1329         if (ret)
1330                 uart_unregister_driver(&cpm_reg);
1331
1332         return ret;
1333 }
1334
1335 static void __exit cpm_uart_exit(void)
1336 {
1337         of_unregister_platform_driver(&cpm_uart_driver);
1338         uart_unregister_driver(&cpm_reg);
1339 }
1340
1341 module_init(cpm_uart_init);
1342 module_exit(cpm_uart_exit);
1343
1344 MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis");
1345 MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $");
1346 MODULE_LICENSE("GPL");
1347 MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR);