igb/e1000e: update PSSR_MDIX value to reflect correct bit
[linux-2.6] / drivers / mfd / sm501.c
1 /* linux/drivers/mfd/sm501.c
2  *
3  * Copyright (C) 2006 Simtec Electronics
4  *      Ben Dooks <ben@simtec.co.uk>
5  *      Vincent Sanders <vince@simtec.co.uk>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  *
11  * SM501 MFD driver
12 */
13
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/delay.h>
17 #include <linux/init.h>
18 #include <linux/list.h>
19 #include <linux/device.h>
20 #include <linux/platform_device.h>
21 #include <linux/pci.h>
22 #include <linux/i2c-gpio.h>
23
24 #include <linux/sm501.h>
25 #include <linux/sm501-regs.h>
26 #include <linux/serial_8250.h>
27
28 #include <asm/io.h>
29
30 struct sm501_device {
31         struct list_head                list;
32         struct platform_device          pdev;
33 };
34
35 struct sm501_gpio;
36
37 #ifdef CONFIG_MFD_SM501_GPIO
38 #include <linux/gpio.h>
39
40 struct sm501_gpio_chip {
41         struct gpio_chip        gpio;
42         struct sm501_gpio       *ourgpio;       /* to get back to parent. */
43         void __iomem            *regbase;
44         void __iomem            *control;       /* address of control reg. */
45 };
46
47 struct sm501_gpio {
48         struct sm501_gpio_chip  low;
49         struct sm501_gpio_chip  high;
50         spinlock_t              lock;
51
52         unsigned int             registered : 1;
53         void __iomem            *regs;
54         struct resource         *regs_res;
55 };
56 #else
57 struct sm501_gpio {
58         /* no gpio support, empty definition for sm501_devdata. */
59 };
60 #endif
61
62 struct sm501_devdata {
63         spinlock_t                       reg_lock;
64         struct mutex                     clock_lock;
65         struct list_head                 devices;
66         struct sm501_gpio                gpio;
67
68         struct device                   *dev;
69         struct resource                 *io_res;
70         struct resource                 *mem_res;
71         struct resource                 *regs_claim;
72         struct sm501_platdata           *platdata;
73
74
75         unsigned int                     in_suspend;
76         unsigned long                    pm_misc;
77
78         int                              unit_power[20];
79         unsigned int                     pdev_id;
80         unsigned int                     irq;
81         void __iomem                    *regs;
82         unsigned int                     rev;
83 };
84
85
86 #define MHZ (1000 * 1000)
87
88 #ifdef DEBUG
89 static const unsigned int div_tab[] = {
90         [0]             = 1,
91         [1]             = 2,
92         [2]             = 4,
93         [3]             = 8,
94         [4]             = 16,
95         [5]             = 32,
96         [6]             = 64,
97         [7]             = 128,
98         [8]             = 3,
99         [9]             = 6,
100         [10]            = 12,
101         [11]            = 24,
102         [12]            = 48,
103         [13]            = 96,
104         [14]            = 192,
105         [15]            = 384,
106         [16]            = 5,
107         [17]            = 10,
108         [18]            = 20,
109         [19]            = 40,
110         [20]            = 80,
111         [21]            = 160,
112         [22]            = 320,
113         [23]            = 604,
114 };
115
116 static unsigned long decode_div(unsigned long pll2, unsigned long val,
117                                 unsigned int lshft, unsigned int selbit,
118                                 unsigned long mask)
119 {
120         if (val & selbit)
121                 pll2 = 288 * MHZ;
122
123         return pll2 / div_tab[(val >> lshft) & mask];
124 }
125
126 #define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
127
128 /* sm501_dump_clk
129  *
130  * Print out the current clock configuration for the device
131 */
132
133 static void sm501_dump_clk(struct sm501_devdata *sm)
134 {
135         unsigned long misct = readl(sm->regs + SM501_MISC_TIMING);
136         unsigned long pm0 = readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
137         unsigned long pm1 = readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
138         unsigned long pmc = readl(sm->regs + SM501_POWER_MODE_CONTROL);
139         unsigned long sdclk0, sdclk1;
140         unsigned long pll2 = 0;
141
142         switch (misct & 0x30) {
143         case 0x00:
144                 pll2 = 336 * MHZ;
145                 break;
146         case 0x10:
147                 pll2 = 288 * MHZ;
148                 break;
149         case 0x20:
150                 pll2 = 240 * MHZ;
151                 break;
152         case 0x30:
153                 pll2 = 192 * MHZ;
154                 break;
155         }
156
157         sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
158         sdclk0 /= div_tab[((misct >> 8) & 0xf)];
159
160         sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
161         sdclk1 /= div_tab[((misct >> 16) & 0xf)];
162
163         dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
164                 misct, pm0, pm1);
165
166         dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n",
167                 fmt_freq(pll2), sdclk0, sdclk1);
168
169         dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1);
170
171         dev_dbg(sm->dev, "PM0[%c]: "
172                  "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
173                  "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
174                  (pmc & 3 ) == 0 ? '*' : '-',
175                  fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
176                  fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
177                  fmt_freq(decode_div(pll2, pm0, 8,  1<<12, 15)),
178                  fmt_freq(decode_div(pll2, pm0, 0,  1<<4,  15)));
179
180         dev_dbg(sm->dev, "PM1[%c]: "
181                 "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
182                 "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
183                 (pmc & 3 ) == 1 ? '*' : '-',
184                 fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
185                 fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
186                 fmt_freq(decode_div(pll2, pm1, 8,  1<<12, 15)),
187                 fmt_freq(decode_div(pll2, pm1, 0,  1<<4,  15)));
188 }
189
190 static void sm501_dump_regs(struct sm501_devdata *sm)
191 {
192         void __iomem *regs = sm->regs;
193
194         dev_info(sm->dev, "System Control   %08x\n",
195                         readl(regs + SM501_SYSTEM_CONTROL));
196         dev_info(sm->dev, "Misc Control     %08x\n",
197                         readl(regs + SM501_MISC_CONTROL));
198         dev_info(sm->dev, "GPIO Control Low %08x\n",
199                         readl(regs + SM501_GPIO31_0_CONTROL));
200         dev_info(sm->dev, "GPIO Control Hi  %08x\n",
201                         readl(regs + SM501_GPIO63_32_CONTROL));
202         dev_info(sm->dev, "DRAM Control     %08x\n",
203                         readl(regs + SM501_DRAM_CONTROL));
204         dev_info(sm->dev, "Arbitration Ctrl %08x\n",
205                         readl(regs + SM501_ARBTRTN_CONTROL));
206         dev_info(sm->dev, "Misc Timing      %08x\n",
207                         readl(regs + SM501_MISC_TIMING));
208 }
209
210 static void sm501_dump_gate(struct sm501_devdata *sm)
211 {
212         dev_info(sm->dev, "CurrentGate      %08x\n",
213                         readl(sm->regs + SM501_CURRENT_GATE));
214         dev_info(sm->dev, "CurrentClock     %08x\n",
215                         readl(sm->regs + SM501_CURRENT_CLOCK));
216         dev_info(sm->dev, "PowerModeControl %08x\n",
217                         readl(sm->regs + SM501_POWER_MODE_CONTROL));
218 }
219
220 #else
221 static inline void sm501_dump_gate(struct sm501_devdata *sm) { }
222 static inline void sm501_dump_regs(struct sm501_devdata *sm) { }
223 static inline void sm501_dump_clk(struct sm501_devdata *sm) { }
224 #endif
225
226 /* sm501_sync_regs
227  *
228  * ensure the
229 */
230
231 static void sm501_sync_regs(struct sm501_devdata *sm)
232 {
233         readl(sm->regs);
234 }
235
236 static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
237 {
238         /* during suspend/resume, we are currently not allowed to sleep,
239          * so change to using mdelay() instead of msleep() if we
240          * are in one of these paths */
241
242         if (sm->in_suspend)
243                 mdelay(delay);
244         else
245                 msleep(delay);
246 }
247
248 /* sm501_misc_control
249  *
250  * alters the miscellaneous control parameters
251 */
252
253 int sm501_misc_control(struct device *dev,
254                        unsigned long set, unsigned long clear)
255 {
256         struct sm501_devdata *sm = dev_get_drvdata(dev);
257         unsigned long misc;
258         unsigned long save;
259         unsigned long to;
260
261         spin_lock_irqsave(&sm->reg_lock, save);
262
263         misc = readl(sm->regs + SM501_MISC_CONTROL);
264         to = (misc & ~clear) | set;
265
266         if (to != misc) {
267                 writel(to, sm->regs + SM501_MISC_CONTROL);
268                 sm501_sync_regs(sm);
269
270                 dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
271         }
272
273         spin_unlock_irqrestore(&sm->reg_lock, save);
274         return to;
275 }
276
277 EXPORT_SYMBOL_GPL(sm501_misc_control);
278
279 /* sm501_modify_reg
280  *
281  * Modify a register in the SM501 which may be shared with other
282  * drivers.
283 */
284
285 unsigned long sm501_modify_reg(struct device *dev,
286                                unsigned long reg,
287                                unsigned long set,
288                                unsigned long clear)
289 {
290         struct sm501_devdata *sm = dev_get_drvdata(dev);
291         unsigned long data;
292         unsigned long save;
293
294         spin_lock_irqsave(&sm->reg_lock, save);
295
296         data = readl(sm->regs + reg);
297         data |= set;
298         data &= ~clear;
299
300         writel(data, sm->regs + reg);
301         sm501_sync_regs(sm);
302
303         spin_unlock_irqrestore(&sm->reg_lock, save);
304
305         return data;
306 }
307
308 EXPORT_SYMBOL_GPL(sm501_modify_reg);
309
310 /* sm501_unit_power
311  *
312  * alters the power active gate to set specific units on or off
313  */
314
315 int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
316 {
317         struct sm501_devdata *sm = dev_get_drvdata(dev);
318         unsigned long mode;
319         unsigned long gate;
320         unsigned long clock;
321
322         mutex_lock(&sm->clock_lock);
323
324         mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
325         gate = readl(sm->regs + SM501_CURRENT_GATE);
326         clock = readl(sm->regs + SM501_CURRENT_CLOCK);
327
328         mode &= 3;              /* get current power mode */
329
330         if (unit >= ARRAY_SIZE(sm->unit_power)) {
331                 dev_err(dev, "%s: bad unit %d\n", __func__, unit);
332                 goto already;
333         }
334
335         dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __func__, unit,
336                 sm->unit_power[unit], to);
337
338         if (to == 0 && sm->unit_power[unit] == 0) {
339                 dev_err(sm->dev, "unit %d is already shutdown\n", unit);
340                 goto already;
341         }
342
343         sm->unit_power[unit] += to ? 1 : -1;
344         to = sm->unit_power[unit] ? 1 : 0;
345
346         if (to) {
347                 if (gate & (1 << unit))
348                         goto already;
349                 gate |= (1 << unit);
350         } else {
351                 if (!(gate & (1 << unit)))
352                         goto already;
353                 gate &= ~(1 << unit);
354         }
355
356         switch (mode) {
357         case 1:
358                 writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
359                 writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
360                 mode = 0;
361                 break;
362         case 2:
363         case 0:
364                 writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
365                 writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
366                 mode = 1;
367                 break;
368
369         default:
370                 return -1;
371         }
372
373         writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
374         sm501_sync_regs(sm);
375
376         dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
377                 gate, clock, mode);
378
379         sm501_mdelay(sm, 16);
380
381  already:
382         mutex_unlock(&sm->clock_lock);
383         return gate;
384 }
385
386 EXPORT_SYMBOL_GPL(sm501_unit_power);
387
388
389 /* Perform a rounded division. */
390 static long sm501fb_round_div(long num, long denom)
391 {
392         /* n / d + 1 / 2 = (2n + d) / 2d */
393         return (2 * num + denom) / (2 * denom);
394 }
395
396 /* clock value structure. */
397 struct sm501_clock {
398         unsigned long mclk;
399         int divider;
400         int shift;
401         unsigned int m, n, k;
402 };
403
404 /* sm501_calc_clock
405  *
406  * Calculates the nearest discrete clock frequency that
407  * can be achieved with the specified input clock.
408  *   the maximum divisor is 3 or 5
409  */
410
411 static int sm501_calc_clock(unsigned long freq,
412                             struct sm501_clock *clock,
413                             int max_div,
414                             unsigned long mclk,
415                             long *best_diff)
416 {
417         int ret = 0;
418         int divider;
419         int shift;
420         long diff;
421
422         /* try dividers 1 and 3 for CRT and for panel,
423            try divider 5 for panel only.*/
424
425         for (divider = 1; divider <= max_div; divider += 2) {
426                 /* try all 8 shift values.*/
427                 for (shift = 0; shift < 8; shift++) {
428                         /* Calculate difference to requested clock */
429                         diff = sm501fb_round_div(mclk, divider << shift) - freq;
430                         if (diff < 0)
431                                 diff = -diff;
432
433                         /* If it is less than the current, use it */
434                         if (diff < *best_diff) {
435                                 *best_diff = diff;
436
437                                 clock->mclk = mclk;
438                                 clock->divider = divider;
439                                 clock->shift = shift;
440                                 ret = 1;
441                         }
442                 }
443         }
444
445         return ret;
446 }
447
448 /* sm501_calc_pll
449  *
450  * Calculates the nearest discrete clock frequency that can be
451  * achieved using the programmable PLL.
452  *   the maximum divisor is 3 or 5
453  */
454
455 static unsigned long sm501_calc_pll(unsigned long freq,
456                                         struct sm501_clock *clock,
457                                         int max_div)
458 {
459         unsigned long mclk;
460         unsigned int m, n, k;
461         long best_diff = 999999999;
462
463         /*
464          * The SM502 datasheet doesn't specify the min/max values for M and N.
465          * N = 1 at least doesn't work in practice.
466          */
467         for (m = 2; m <= 255; m++) {
468                 for (n = 2; n <= 127; n++) {
469                         for (k = 0; k <= 1; k++) {
470                                 mclk = (24000000UL * m / n) >> k;
471
472                                 if (sm501_calc_clock(freq, clock, max_div,
473                                                      mclk, &best_diff)) {
474                                         clock->m = m;
475                                         clock->n = n;
476                                         clock->k = k;
477                                 }
478                         }
479                 }
480         }
481
482         /* Return best clock. */
483         return clock->mclk / (clock->divider << clock->shift);
484 }
485
486 /* sm501_select_clock
487  *
488  * Calculates the nearest discrete clock frequency that can be
489  * achieved using the 288MHz and 336MHz PLLs.
490  *   the maximum divisor is 3 or 5
491  */
492
493 static unsigned long sm501_select_clock(unsigned long freq,
494                                         struct sm501_clock *clock,
495                                         int max_div)
496 {
497         unsigned long mclk;
498         long best_diff = 999999999;
499
500         /* Try 288MHz and 336MHz clocks. */
501         for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
502                 sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
503         }
504
505         /* Return best clock. */
506         return clock->mclk / (clock->divider << clock->shift);
507 }
508
509 /* sm501_set_clock
510  *
511  * set one of the four clock sources to the closest available frequency to
512  *  the one specified
513 */
514
515 unsigned long sm501_set_clock(struct device *dev,
516                               int clksrc,
517                               unsigned long req_freq)
518 {
519         struct sm501_devdata *sm = dev_get_drvdata(dev);
520         unsigned long mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
521         unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE);
522         unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
523         unsigned char reg;
524         unsigned int pll_reg = 0;
525         unsigned long sm501_freq; /* the actual frequency acheived */
526
527         struct sm501_clock to;
528
529         /* find achivable discrete frequency and setup register value
530          * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK
531          * has an extra bit for the divider */
532
533         switch (clksrc) {
534         case SM501_CLOCK_P2XCLK:
535                 /* This clock is divided in half so to achive the
536                  * requested frequency the value must be multiplied by
537                  * 2. This clock also has an additional pre divisor */
538
539                 if (sm->rev >= 0xC0) {
540                         /* SM502 -> use the programmable PLL */
541                         sm501_freq = (sm501_calc_pll(2 * req_freq,
542                                                      &to, 5) / 2);
543                         reg = to.shift & 0x07;/* bottom 3 bits are shift */
544                         if (to.divider == 3)
545                                 reg |= 0x08; /* /3 divider required */
546                         else if (to.divider == 5)
547                                 reg |= 0x10; /* /5 divider required */
548                         reg |= 0x40; /* select the programmable PLL */
549                         pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
550                 } else {
551                         sm501_freq = (sm501_select_clock(2 * req_freq,
552                                                          &to, 5) / 2);
553                         reg = to.shift & 0x07;/* bottom 3 bits are shift */
554                         if (to.divider == 3)
555                                 reg |= 0x08; /* /3 divider required */
556                         else if (to.divider == 5)
557                                 reg |= 0x10; /* /5 divider required */
558                         if (to.mclk != 288000000)
559                                 reg |= 0x20; /* which mclk pll is source */
560                 }
561                 break;
562
563         case SM501_CLOCK_V2XCLK:
564                 /* This clock is divided in half so to achive the
565                  * requested frequency the value must be multiplied by 2. */
566
567                 sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
568                 reg=to.shift & 0x07;    /* bottom 3 bits are shift */
569                 if (to.divider == 3)
570                         reg |= 0x08;    /* /3 divider required */
571                 if (to.mclk != 288000000)
572                         reg |= 0x10;    /* which mclk pll is source */
573                 break;
574
575         case SM501_CLOCK_MCLK:
576         case SM501_CLOCK_M1XCLK:
577                 /* These clocks are the same and not further divided */
578
579                 sm501_freq = sm501_select_clock( req_freq, &to, 3);
580                 reg=to.shift & 0x07;    /* bottom 3 bits are shift */
581                 if (to.divider == 3)
582                         reg |= 0x08;    /* /3 divider required */
583                 if (to.mclk != 288000000)
584                         reg |= 0x10;    /* which mclk pll is source */
585                 break;
586
587         default:
588                 return 0; /* this is bad */
589         }
590
591         mutex_lock(&sm->clock_lock);
592
593         mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
594         gate = readl(sm->regs + SM501_CURRENT_GATE);
595         clock = readl(sm->regs + SM501_CURRENT_CLOCK);
596
597         clock = clock & ~(0xFF << clksrc);
598         clock |= reg<<clksrc;
599
600         mode &= 3;      /* find current mode */
601
602         switch (mode) {
603         case 1:
604                 writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
605                 writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
606                 mode = 0;
607                 break;
608         case 2:
609         case 0:
610                 writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
611                 writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
612                 mode = 1;
613                 break;
614
615         default:
616                 mutex_unlock(&sm->clock_lock);
617                 return -1;
618         }
619
620         writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
621
622         if (pll_reg)
623                 writel(pll_reg, sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
624
625         sm501_sync_regs(sm);
626
627         dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
628                 gate, clock, mode);
629
630         sm501_mdelay(sm, 16);
631         mutex_unlock(&sm->clock_lock);
632
633         sm501_dump_clk(sm);
634
635         return sm501_freq;
636 }
637
638 EXPORT_SYMBOL_GPL(sm501_set_clock);
639
640 /* sm501_find_clock
641  *
642  * finds the closest available frequency for a given clock
643 */
644
645 unsigned long sm501_find_clock(struct device *dev,
646                                int clksrc,
647                                unsigned long req_freq)
648 {
649         struct sm501_devdata *sm = dev_get_drvdata(dev);
650         unsigned long sm501_freq; /* the frequency achiveable by the 501 */
651         struct sm501_clock to;
652
653         switch (clksrc) {
654         case SM501_CLOCK_P2XCLK:
655                 if (sm->rev >= 0xC0) {
656                         /* SM502 -> use the programmable PLL */
657                         sm501_freq = (sm501_calc_pll(2 * req_freq,
658                                                      &to, 5) / 2);
659                 } else {
660                         sm501_freq = (sm501_select_clock(2 * req_freq,
661                                                          &to, 5) / 2);
662                 }
663                 break;
664
665         case SM501_CLOCK_V2XCLK:
666                 sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
667                 break;
668
669         case SM501_CLOCK_MCLK:
670         case SM501_CLOCK_M1XCLK:
671                 sm501_freq = sm501_select_clock(req_freq, &to, 3);
672                 break;
673
674         default:
675                 sm501_freq = 0;         /* error */
676         }
677
678         return sm501_freq;
679 }
680
681 EXPORT_SYMBOL_GPL(sm501_find_clock);
682
683 static struct sm501_device *to_sm_device(struct platform_device *pdev)
684 {
685         return container_of(pdev, struct sm501_device, pdev);
686 }
687
688 /* sm501_device_release
689  *
690  * A release function for the platform devices we create to allow us to
691  * free any items we allocated
692 */
693
694 static void sm501_device_release(struct device *dev)
695 {
696         kfree(to_sm_device(to_platform_device(dev)));
697 }
698
699 /* sm501_create_subdev
700  *
701  * Create a skeleton platform device with resources for passing to a
702  * sub-driver
703 */
704
705 static struct platform_device *
706 sm501_create_subdev(struct sm501_devdata *sm, char *name,
707                     unsigned int res_count, unsigned int platform_data_size)
708 {
709         struct sm501_device *smdev;
710
711         smdev = kzalloc(sizeof(struct sm501_device) +
712                         (sizeof(struct resource) * res_count) +
713                         platform_data_size, GFP_KERNEL);
714         if (!smdev)
715                 return NULL;
716
717         smdev->pdev.dev.release = sm501_device_release;
718
719         smdev->pdev.name = name;
720         smdev->pdev.id = sm->pdev_id;
721         smdev->pdev.dev.parent = sm->dev;
722
723         if (res_count) {
724                 smdev->pdev.resource = (struct resource *)(smdev+1);
725                 smdev->pdev.num_resources = res_count;
726         }
727         if (platform_data_size)
728                 smdev->pdev.dev.platform_data = (void *)(smdev+1);
729
730         return &smdev->pdev;
731 }
732
733 /* sm501_register_device
734  *
735  * Register a platform device created with sm501_create_subdev()
736 */
737
738 static int sm501_register_device(struct sm501_devdata *sm,
739                                  struct platform_device *pdev)
740 {
741         struct sm501_device *smdev = to_sm_device(pdev);
742         int ptr;
743         int ret;
744
745         for (ptr = 0; ptr < pdev->num_resources; ptr++) {
746                 printk(KERN_DEBUG "%s[%d] flags %08lx: %08llx..%08llx\n",
747                        pdev->name, ptr,
748                        pdev->resource[ptr].flags,
749                        (unsigned long long)pdev->resource[ptr].start,
750                        (unsigned long long)pdev->resource[ptr].end);
751         }
752
753         ret = platform_device_register(pdev);
754
755         if (ret >= 0) {
756                 dev_dbg(sm->dev, "registered %s\n", pdev->name);
757                 list_add_tail(&smdev->list, &sm->devices);
758         } else
759                 dev_err(sm->dev, "error registering %s (%d)\n",
760                         pdev->name, ret);
761
762         return ret;
763 }
764
765 /* sm501_create_subio
766  *
767  * Fill in an IO resource for a sub device
768 */
769
770 static void sm501_create_subio(struct sm501_devdata *sm,
771                                struct resource *res,
772                                resource_size_t offs,
773                                resource_size_t size)
774 {
775         res->flags = IORESOURCE_MEM;
776         res->parent = sm->io_res;
777         res->start = sm->io_res->start + offs;
778         res->end = res->start + size - 1;
779 }
780
781 /* sm501_create_mem
782  *
783  * Fill in an MEM resource for a sub device
784 */
785
786 static void sm501_create_mem(struct sm501_devdata *sm,
787                              struct resource *res,
788                              resource_size_t *offs,
789                              resource_size_t size)
790 {
791         *offs -= size;          /* adjust memory size */
792
793         res->flags = IORESOURCE_MEM;
794         res->parent = sm->mem_res;
795         res->start = sm->mem_res->start + *offs;
796         res->end = res->start + size - 1;
797 }
798
799 /* sm501_create_irq
800  *
801  * Fill in an IRQ resource for a sub device
802 */
803
804 static void sm501_create_irq(struct sm501_devdata *sm,
805                              struct resource *res)
806 {
807         res->flags = IORESOURCE_IRQ;
808         res->parent = NULL;
809         res->start = res->end = sm->irq;
810 }
811
812 static int sm501_register_usbhost(struct sm501_devdata *sm,
813                                   resource_size_t *mem_avail)
814 {
815         struct platform_device *pdev;
816
817         pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0);
818         if (!pdev)
819                 return -ENOMEM;
820
821         sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000);
822         sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024);
823         sm501_create_irq(sm, &pdev->resource[2]);
824
825         return sm501_register_device(sm, pdev);
826 }
827
828 static void sm501_setup_uart_data(struct sm501_devdata *sm,
829                                   struct plat_serial8250_port *uart_data,
830                                   unsigned int offset)
831 {
832         uart_data->membase = sm->regs + offset;
833         uart_data->mapbase = sm->io_res->start + offset;
834         uart_data->iotype = UPIO_MEM;
835         uart_data->irq = sm->irq;
836         uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
837         uart_data->regshift = 2;
838         uart_data->uartclk = (9600 * 16);
839 }
840
841 static int sm501_register_uart(struct sm501_devdata *sm, int devices)
842 {
843         struct platform_device *pdev;
844         struct plat_serial8250_port *uart_data;
845
846         pdev = sm501_create_subdev(sm, "serial8250", 0,
847                                    sizeof(struct plat_serial8250_port) * 3);
848         if (!pdev)
849                 return -ENOMEM;
850
851         uart_data = pdev->dev.platform_data;
852
853         if (devices & SM501_USE_UART0) {
854                 sm501_setup_uart_data(sm, uart_data++, 0x30000);
855                 sm501_unit_power(sm->dev, SM501_GATE_UART0, 1);
856                 sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0);
857                 sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0);
858         }
859         if (devices & SM501_USE_UART1) {
860                 sm501_setup_uart_data(sm, uart_data++, 0x30020);
861                 sm501_unit_power(sm->dev, SM501_GATE_UART1, 1);
862                 sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0);
863                 sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0);
864         }
865
866         pdev->id = PLAT8250_DEV_SM501;
867
868         return sm501_register_device(sm, pdev);
869 }
870
871 static int sm501_register_display(struct sm501_devdata *sm,
872                                   resource_size_t *mem_avail)
873 {
874         struct platform_device *pdev;
875
876         pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0);
877         if (!pdev)
878                 return -ENOMEM;
879
880         sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000);
881         sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000);
882         sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail);
883         sm501_create_irq(sm, &pdev->resource[3]);
884
885         return sm501_register_device(sm, pdev);
886 }
887
888 #ifdef CONFIG_MFD_SM501_GPIO
889
890 static inline struct sm501_gpio_chip *to_sm501_gpio(struct gpio_chip *gc)
891 {
892         return container_of(gc, struct sm501_gpio_chip, gpio);
893 }
894
895 static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
896 {
897         return container_of(gpio, struct sm501_devdata, gpio);
898 }
899
900 static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
901
902 {
903         struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip);
904         unsigned long result;
905
906         result = readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
907         result >>= offset;
908
909         return result & 1UL;
910 }
911
912 static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
913                                    unsigned long bit)
914 {
915         unsigned long ctrl;
916
917         /* check and modify if this pin is not set as gpio. */
918
919         if (readl(smchip->control) & bit) {
920                 dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
921                          "changing mode of gpio, bit %08lx\n", bit);
922
923                 ctrl = readl(smchip->control);
924                 ctrl &= ~bit;
925                 writel(ctrl, smchip->control);
926
927                 sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
928         }
929 }
930
931 static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
932
933 {
934         struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
935         struct sm501_gpio *smgpio = smchip->ourgpio;
936         unsigned long bit = 1 << offset;
937         void __iomem *regs = smchip->regbase;
938         unsigned long save;
939         unsigned long val;
940
941         dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
942                 __func__, chip, offset);
943
944         spin_lock_irqsave(&smgpio->lock, save);
945
946         val = readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
947         if (value)
948                 val |= bit;
949         writel(val, regs);
950
951         sm501_sync_regs(sm501_gpio_to_dev(smgpio));
952         sm501_gpio_ensure_gpio(smchip, bit);
953
954         spin_unlock_irqrestore(&smgpio->lock, save);
955 }
956
957 static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
958 {
959         struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
960         struct sm501_gpio *smgpio = smchip->ourgpio;
961         void __iomem *regs = smchip->regbase;
962         unsigned long bit = 1 << offset;
963         unsigned long save;
964         unsigned long ddr;
965
966         dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
967                 __func__, chip, offset);
968
969         spin_lock_irqsave(&smgpio->lock, save);
970
971         ddr = readl(regs + SM501_GPIO_DDR_LOW);
972         writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
973
974         sm501_sync_regs(sm501_gpio_to_dev(smgpio));
975         sm501_gpio_ensure_gpio(smchip, bit);
976
977         spin_unlock_irqrestore(&smgpio->lock, save);
978
979         return 0;
980 }
981
982 static int sm501_gpio_output(struct gpio_chip *chip,
983                              unsigned offset, int value)
984 {
985         struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
986         struct sm501_gpio *smgpio = smchip->ourgpio;
987         unsigned long bit = 1 << offset;
988         void __iomem *regs = smchip->regbase;
989         unsigned long save;
990         unsigned long val;
991         unsigned long ddr;
992
993         dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
994                 __func__, chip, offset, value);
995
996         spin_lock_irqsave(&smgpio->lock, save);
997
998         val = readl(regs + SM501_GPIO_DATA_LOW);
999         if (value)
1000                 val |= bit;
1001         else
1002                 val &= ~bit;
1003         writel(val, regs);
1004
1005         ddr = readl(regs + SM501_GPIO_DDR_LOW);
1006         writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
1007
1008         sm501_sync_regs(sm501_gpio_to_dev(smgpio));
1009         writel(val, regs + SM501_GPIO_DATA_LOW);
1010
1011         sm501_sync_regs(sm501_gpio_to_dev(smgpio));
1012         spin_unlock_irqrestore(&smgpio->lock, save);
1013
1014         return 0;
1015 }
1016
1017 static struct gpio_chip gpio_chip_template = {
1018         .ngpio                  = 32,
1019         .direction_input        = sm501_gpio_input,
1020         .direction_output       = sm501_gpio_output,
1021         .set                    = sm501_gpio_set,
1022         .get                    = sm501_gpio_get,
1023 };
1024
1025 static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
1026                                               struct sm501_gpio *gpio,
1027                                               struct sm501_gpio_chip *chip)
1028 {
1029         struct sm501_platdata *pdata = sm->platdata;
1030         struct gpio_chip *gchip = &chip->gpio;
1031         int base = pdata->gpio_base;
1032
1033         chip->gpio = gpio_chip_template;
1034
1035         if (chip == &gpio->high) {
1036                 if (base > 0)
1037                         base += 32;
1038                 chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
1039                 chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
1040                 gchip->label  = "SM501-HIGH";
1041         } else {
1042                 chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
1043                 chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
1044                 gchip->label  = "SM501-LOW";
1045         }
1046
1047         gchip->base   = base;
1048         chip->ourgpio = gpio;
1049
1050         return gpiochip_add(gchip);
1051 }
1052
1053 static int __devinit sm501_register_gpio(struct sm501_devdata *sm)
1054 {
1055         struct sm501_gpio *gpio = &sm->gpio;
1056         resource_size_t iobase = sm->io_res->start + SM501_GPIO;
1057         int ret;
1058         int tmp;
1059
1060         dev_dbg(sm->dev, "registering gpio block %08llx\n",
1061                 (unsigned long long)iobase);
1062
1063         spin_lock_init(&gpio->lock);
1064
1065         gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
1066         if (gpio->regs_res == NULL) {
1067                 dev_err(sm->dev, "gpio: failed to request region\n");
1068                 return -ENXIO;
1069         }
1070
1071         gpio->regs = ioremap(iobase, 0x20);
1072         if (gpio->regs == NULL) {
1073                 dev_err(sm->dev, "gpio: failed to remap registers\n");
1074                 ret = -ENXIO;
1075                 goto err_claimed;
1076         }
1077
1078         /* Register both our chips. */
1079
1080         ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
1081         if (ret) {
1082                 dev_err(sm->dev, "failed to add low chip\n");
1083                 goto err_mapped;
1084         }
1085
1086         ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
1087         if (ret) {
1088                 dev_err(sm->dev, "failed to add high chip\n");
1089                 goto err_low_chip;
1090         }
1091
1092         gpio->registered = 1;
1093
1094         return 0;
1095
1096  err_low_chip:
1097         tmp = gpiochip_remove(&gpio->low.gpio);
1098         if (tmp) {
1099                 dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
1100                 return ret;
1101         }
1102
1103  err_mapped:
1104         iounmap(gpio->regs);
1105
1106  err_claimed:
1107         release_resource(gpio->regs_res);
1108         kfree(gpio->regs_res);
1109
1110         return ret;
1111 }
1112
1113 static void sm501_gpio_remove(struct sm501_devdata *sm)
1114 {
1115         struct sm501_gpio *gpio = &sm->gpio;
1116         int ret;
1117
1118         if (!sm->gpio.registered)
1119                 return;
1120
1121         ret = gpiochip_remove(&gpio->low.gpio);
1122         if (ret)
1123                 dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
1124
1125         ret = gpiochip_remove(&gpio->high.gpio);
1126         if (ret)
1127                 dev_err(sm->dev, "cannot remove high chip, cannot tidy up\n");
1128
1129         iounmap(gpio->regs);
1130         release_resource(gpio->regs_res);
1131         kfree(gpio->regs_res);
1132 }
1133
1134 static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
1135 {
1136         struct sm501_gpio *gpio = &sm->gpio;
1137         int base = (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
1138
1139         return (pin % 32) + base;
1140 }
1141
1142 static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
1143 {
1144         return sm->gpio.registered;
1145 }
1146 #else
1147 static inline int sm501_register_gpio(struct sm501_devdata *sm)
1148 {
1149         return 0;
1150 }
1151
1152 static inline void sm501_gpio_remove(struct sm501_devdata *sm)
1153 {
1154 }
1155
1156 static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
1157 {
1158         return -1;
1159 }
1160
1161 static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
1162 {
1163         return 0;
1164 }
1165 #endif
1166
1167 static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
1168                                             struct sm501_platdata_gpio_i2c *iic)
1169 {
1170         struct i2c_gpio_platform_data *icd;
1171         struct platform_device *pdev;
1172
1173         pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
1174                                    sizeof(struct i2c_gpio_platform_data));
1175         if (!pdev)
1176                 return -ENOMEM;
1177
1178         icd = pdev->dev.platform_data;
1179
1180         /* We keep the pin_sda and pin_scl fields relative in case the
1181          * same platform data is passed to >1 SM501.
1182          */
1183
1184         icd->sda_pin = sm501_gpio_pin2nr(sm, iic->pin_sda);
1185         icd->scl_pin = sm501_gpio_pin2nr(sm, iic->pin_scl);
1186         icd->timeout = iic->timeout;
1187         icd->udelay = iic->udelay;
1188
1189         /* note, we can't use either of the pin numbers, as the i2c-gpio
1190          * driver uses the platform.id field to generate the bus number
1191          * to register with the i2c core; The i2c core doesn't have enough
1192          * entries to deal with anything we currently use.
1193         */
1194
1195         pdev->id = iic->bus_num;
1196
1197         dev_info(sm->dev, "registering i2c-%d: sda=%d (%d), scl=%d (%d)\n",
1198                  iic->bus_num,
1199                  icd->sda_pin, iic->pin_sda, icd->scl_pin, iic->pin_scl);
1200
1201         return sm501_register_device(sm, pdev);
1202 }
1203
1204 static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
1205                                    struct sm501_platdata *pdata)
1206 {
1207         struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
1208         int index;
1209         int ret;
1210
1211         for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
1212                 ret = sm501_register_gpio_i2c_instance(sm, iic);
1213                 if (ret < 0)
1214                         return ret;
1215         }
1216
1217         return 0;
1218 }
1219
1220 /* sm501_dbg_regs
1221  *
1222  * Debug attribute to attach to parent device to show core registers
1223 */
1224
1225 static ssize_t sm501_dbg_regs(struct device *dev,
1226                               struct device_attribute *attr, char *buff)
1227 {
1228         struct sm501_devdata *sm = dev_get_drvdata(dev) ;
1229         unsigned int reg;
1230         char *ptr = buff;
1231         int ret;
1232
1233         for (reg = 0x00; reg < 0x70; reg += 4) {
1234                 ret = sprintf(ptr, "%08x = %08x\n",
1235                               reg, readl(sm->regs + reg));
1236                 ptr += ret;
1237         }
1238
1239         return ptr - buff;
1240 }
1241
1242
1243 static DEVICE_ATTR(dbg_regs, 0666, sm501_dbg_regs, NULL);
1244
1245 /* sm501_init_reg
1246  *
1247  * Helper function for the init code to setup a register
1248  *
1249  * clear the bits which are set in r->mask, and then set
1250  * the bits set in r->set.
1251 */
1252
1253 static inline void sm501_init_reg(struct sm501_devdata *sm,
1254                                   unsigned long reg,
1255                                   struct sm501_reg_init *r)
1256 {
1257         unsigned long tmp;
1258
1259         tmp = readl(sm->regs + reg);
1260         tmp &= ~r->mask;
1261         tmp |= r->set;
1262         writel(tmp, sm->regs + reg);
1263 }
1264
1265 /* sm501_init_regs
1266  *
1267  * Setup core register values
1268 */
1269
1270 static void sm501_init_regs(struct sm501_devdata *sm,
1271                             struct sm501_initdata *init)
1272 {
1273         sm501_misc_control(sm->dev,
1274                            init->misc_control.set,
1275                            init->misc_control.mask);
1276
1277         sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing);
1278         sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
1279         sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
1280
1281         if (init->m1xclk) {
1282                 dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
1283                 sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
1284         }
1285
1286         if (init->mclk) {
1287                 dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
1288                 sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
1289         }
1290
1291 }
1292
1293 /* Check the PLL sources for the M1CLK and M1XCLK
1294  *
1295  * If the M1CLK and M1XCLKs are not sourced from the same PLL, then
1296  * there is a risk (see errata AB-5) that the SM501 will cease proper
1297  * function. If this happens, then it is likely the SM501 will
1298  * hang the system.
1299 */
1300
1301 static int sm501_check_clocks(struct sm501_devdata *sm)
1302 {
1303         unsigned long pwrmode = readl(sm->regs + SM501_CURRENT_CLOCK);
1304         unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
1305         unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
1306
1307         return ((msrc == 0 && m1src != 0) || (msrc != 0 && m1src == 0));
1308 }
1309
1310 static unsigned int sm501_mem_local[] = {
1311         [0]     = 4*1024*1024,
1312         [1]     = 8*1024*1024,
1313         [2]     = 16*1024*1024,
1314         [3]     = 32*1024*1024,
1315         [4]     = 64*1024*1024,
1316         [5]     = 2*1024*1024,
1317 };
1318
1319 /* sm501_init_dev
1320  *
1321  * Common init code for an SM501
1322 */
1323
1324 static int __devinit sm501_init_dev(struct sm501_devdata *sm)
1325 {
1326         struct sm501_initdata *idata;
1327         struct sm501_platdata *pdata;
1328         resource_size_t mem_avail;
1329         unsigned long dramctrl;
1330         unsigned long devid;
1331         int ret;
1332
1333         mutex_init(&sm->clock_lock);
1334         spin_lock_init(&sm->reg_lock);
1335
1336         INIT_LIST_HEAD(&sm->devices);
1337
1338         devid = readl(sm->regs + SM501_DEVICEID);
1339
1340         if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
1341                 dev_err(sm->dev, "incorrect device id %08lx\n", devid);
1342                 return -EINVAL;
1343         }
1344
1345         /* disable irqs */
1346         writel(0, sm->regs + SM501_IRQ_MASK);
1347
1348         dramctrl = readl(sm->regs + SM501_DRAM_CONTROL);
1349         mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
1350
1351         dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
1352                  sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
1353
1354         sm->rev = devid & SM501_DEVICEID_REVMASK;
1355
1356         sm501_dump_gate(sm);
1357
1358         ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
1359         if (ret)
1360                 dev_err(sm->dev, "failed to create debug regs file\n");
1361
1362         sm501_dump_clk(sm);
1363
1364         /* check to see if we have some device initialisation */
1365
1366         pdata = sm->platdata;
1367         idata = pdata ? pdata->init : NULL;
1368
1369         if (idata) {
1370                 sm501_init_regs(sm, idata);
1371
1372                 if (idata->devices & SM501_USE_USB_HOST)
1373                         sm501_register_usbhost(sm, &mem_avail);
1374                 if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
1375                         sm501_register_uart(sm, idata->devices);
1376                 if (idata->devices & SM501_USE_GPIO)
1377                         sm501_register_gpio(sm);
1378         }
1379
1380         if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
1381                 if (!sm501_gpio_isregistered(sm))
1382                         dev_err(sm->dev, "no gpio available for i2c gpio.\n");
1383                 else
1384                         sm501_register_gpio_i2c(sm, pdata);
1385         }
1386
1387         ret = sm501_check_clocks(sm);
1388         if (ret) {
1389                 dev_err(sm->dev, "M1X and M clocks sourced from different "
1390                                         "PLLs\n");
1391                 return -EINVAL;
1392         }
1393
1394         /* always create a framebuffer */
1395         sm501_register_display(sm, &mem_avail);
1396
1397         return 0;
1398 }
1399
1400 static int __devinit sm501_plat_probe(struct platform_device *dev)
1401 {
1402         struct sm501_devdata *sm;
1403         int ret;
1404
1405         sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
1406         if (sm == NULL) {
1407                 dev_err(&dev->dev, "no memory for device data\n");
1408                 ret = -ENOMEM;
1409                 goto err1;
1410         }
1411
1412         sm->dev = &dev->dev;
1413         sm->pdev_id = dev->id;
1414         sm->platdata = dev->dev.platform_data;
1415
1416         ret = platform_get_irq(dev, 0);
1417         if (ret < 0) {
1418                 dev_err(&dev->dev, "failed to get irq resource\n");
1419                 goto err_res;
1420         }
1421         sm->irq = ret;
1422
1423         sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
1424         sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
1425         if (sm->io_res == NULL || sm->mem_res == NULL) {
1426                 dev_err(&dev->dev, "failed to get IO resource\n");
1427                 ret = -ENOENT;
1428                 goto err_res;
1429         }
1430
1431         sm->regs_claim = request_mem_region(sm->io_res->start,
1432                                             0x100, "sm501");
1433
1434         if (sm->regs_claim == NULL) {
1435                 dev_err(&dev->dev, "cannot claim registers\n");
1436                 ret = -EBUSY;
1437                 goto err_res;
1438         }
1439
1440         platform_set_drvdata(dev, sm);
1441
1442         sm->regs = ioremap(sm->io_res->start,
1443                            (sm->io_res->end - sm->io_res->start) - 1);
1444
1445         if (sm->regs == NULL) {
1446                 dev_err(&dev->dev, "cannot remap registers\n");
1447                 ret = -EIO;
1448                 goto err_claim;
1449         }
1450
1451         return sm501_init_dev(sm);
1452
1453  err_claim:
1454         release_resource(sm->regs_claim);
1455         kfree(sm->regs_claim);
1456  err_res:
1457         kfree(sm);
1458  err1:
1459         return ret;
1460
1461 }
1462
1463 #ifdef CONFIG_PM
1464
1465 /* power management support */
1466
1467 static void sm501_set_power(struct sm501_devdata *sm, int on)
1468 {
1469         struct sm501_platdata *pd = sm->platdata;
1470
1471         if (pd == NULL)
1472                 return;
1473
1474         if (pd->get_power) {
1475                 if (pd->get_power(sm->dev) == on) {
1476                         dev_dbg(sm->dev, "is already %d\n", on);
1477                         return;
1478                 }
1479         }
1480
1481         if (pd->set_power) {
1482                 dev_dbg(sm->dev, "setting power to %d\n", on);
1483
1484                 pd->set_power(sm->dev, on);
1485                 sm501_mdelay(sm, 10);
1486         }
1487 }
1488
1489 static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
1490 {
1491         struct sm501_devdata *sm = platform_get_drvdata(pdev);
1492
1493         sm->in_suspend = 1;
1494         sm->pm_misc = readl(sm->regs + SM501_MISC_CONTROL);
1495
1496         sm501_dump_regs(sm);
1497
1498         if (sm->platdata) {
1499                 if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
1500                         sm501_set_power(sm, 0);
1501         }
1502
1503         return 0;
1504 }
1505
1506 static int sm501_plat_resume(struct platform_device *pdev)
1507 {
1508         struct sm501_devdata *sm = platform_get_drvdata(pdev);
1509
1510         sm501_set_power(sm, 1);
1511
1512         sm501_dump_regs(sm);
1513         sm501_dump_gate(sm);
1514         sm501_dump_clk(sm);
1515
1516         /* check to see if we are in the same state as when suspended */
1517
1518         if (readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
1519                 dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
1520                 writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
1521
1522                 /* our suspend causes the controller state to change,
1523                  * either by something attempting setup, power loss,
1524                  * or an external reset event on power change */
1525
1526                 if (sm->platdata && sm->platdata->init) {
1527                         sm501_init_regs(sm, sm->platdata->init);
1528                 }
1529         }
1530
1531         /* dump our state from resume */
1532
1533         sm501_dump_regs(sm);
1534         sm501_dump_clk(sm);
1535
1536         sm->in_suspend = 0;
1537
1538         return 0;
1539 }
1540 #else
1541 #define sm501_plat_suspend NULL
1542 #define sm501_plat_resume NULL
1543 #endif
1544
1545 /* Initialisation data for PCI devices */
1546
1547 static struct sm501_initdata sm501_pci_initdata = {
1548         .gpio_high      = {
1549                 .set    = 0x3F000000,           /* 24bit panel */
1550                 .mask   = 0x0,
1551         },
1552         .misc_timing    = {
1553                 .set    = 0x010100,             /* SDRAM timing */
1554                 .mask   = 0x1F1F00,
1555         },
1556         .misc_control   = {
1557                 .set    = SM501_MISC_PNL_24BIT,
1558                 .mask   = 0,
1559         },
1560
1561         .devices        = SM501_USE_ALL,
1562
1563         /* Errata AB-3 says that 72MHz is the fastest available
1564          * for 33MHZ PCI with proper bus-mastering operation */
1565
1566         .mclk           = 72 * MHZ,
1567         .m1xclk         = 144 * MHZ,
1568 };
1569
1570 static struct sm501_platdata_fbsub sm501_pdata_fbsub = {
1571         .flags          = (SM501FB_FLAG_USE_INIT_MODE |
1572                            SM501FB_FLAG_USE_HWCURSOR |
1573                            SM501FB_FLAG_USE_HWACCEL |
1574                            SM501FB_FLAG_DISABLE_AT_EXIT),
1575 };
1576
1577 static struct sm501_platdata_fb sm501_fb_pdata = {
1578         .fb_route       = SM501_FB_OWN,
1579         .fb_crt         = &sm501_pdata_fbsub,
1580         .fb_pnl         = &sm501_pdata_fbsub,
1581 };
1582
1583 static struct sm501_platdata sm501_pci_platdata = {
1584         .init           = &sm501_pci_initdata,
1585         .fb             = &sm501_fb_pdata,
1586         .gpio_base      = -1,
1587 };
1588
1589 static int __devinit sm501_pci_probe(struct pci_dev *dev,
1590                                      const struct pci_device_id *id)
1591 {
1592         struct sm501_devdata *sm;
1593         int err;
1594
1595         sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
1596         if (sm == NULL) {
1597                 dev_err(&dev->dev, "no memory for device data\n");
1598                 err = -ENOMEM;
1599                 goto err1;
1600         }
1601
1602         /* set a default set of platform data */
1603         dev->dev.platform_data = sm->platdata = &sm501_pci_platdata;
1604
1605         /* set a hopefully unique id for our child platform devices */
1606         sm->pdev_id = 32 + dev->devfn;
1607
1608         pci_set_drvdata(dev, sm);
1609
1610         err = pci_enable_device(dev);
1611         if (err) {
1612                 dev_err(&dev->dev, "cannot enable device\n");
1613                 goto err2;
1614         }
1615
1616         sm->dev = &dev->dev;
1617         sm->irq = dev->irq;
1618
1619 #ifdef __BIG_ENDIAN
1620         /* if the system is big-endian, we most probably have a
1621          * translation in the IO layer making the PCI bus little endian
1622          * so make the framebuffer swapped pixels */
1623
1624         sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN;
1625 #endif
1626
1627         /* check our resources */
1628
1629         if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) {
1630                 dev_err(&dev->dev, "region #0 is not memory?\n");
1631                 err = -EINVAL;
1632                 goto err3;
1633         }
1634
1635         if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) {
1636                 dev_err(&dev->dev, "region #1 is not memory?\n");
1637                 err = -EINVAL;
1638                 goto err3;
1639         }
1640
1641         /* make our resources ready for sharing */
1642
1643         sm->io_res = &dev->resource[1];
1644         sm->mem_res = &dev->resource[0];
1645
1646         sm->regs_claim = request_mem_region(sm->io_res->start,
1647                                             0x100, "sm501");
1648         if (sm->regs_claim == NULL) {
1649                 dev_err(&dev->dev, "cannot claim registers\n");
1650                 err= -EBUSY;
1651                 goto err3;
1652         }
1653
1654         sm->regs = pci_ioremap_bar(dev, 1);
1655
1656         if (sm->regs == NULL) {
1657                 dev_err(&dev->dev, "cannot remap registers\n");
1658                 err = -EIO;
1659                 goto err4;
1660         }
1661
1662         sm501_init_dev(sm);
1663         return 0;
1664
1665  err4:
1666         release_resource(sm->regs_claim);
1667         kfree(sm->regs_claim);
1668  err3:
1669         pci_disable_device(dev);
1670  err2:
1671         pci_set_drvdata(dev, NULL);
1672         kfree(sm);
1673  err1:
1674         return err;
1675 }
1676
1677 static void sm501_remove_sub(struct sm501_devdata *sm,
1678                              struct sm501_device *smdev)
1679 {
1680         list_del(&smdev->list);
1681         platform_device_unregister(&smdev->pdev);
1682 }
1683
1684 static void sm501_dev_remove(struct sm501_devdata *sm)
1685 {
1686         struct sm501_device *smdev, *tmp;
1687
1688         list_for_each_entry_safe(smdev, tmp, &sm->devices, list)
1689                 sm501_remove_sub(sm, smdev);
1690
1691         device_remove_file(sm->dev, &dev_attr_dbg_regs);
1692
1693         sm501_gpio_remove(sm);
1694 }
1695
1696 static void __devexit sm501_pci_remove(struct pci_dev *dev)
1697 {
1698         struct sm501_devdata *sm = pci_get_drvdata(dev);
1699
1700         sm501_dev_remove(sm);
1701         iounmap(sm->regs);
1702
1703         release_resource(sm->regs_claim);
1704         kfree(sm->regs_claim);
1705
1706         pci_set_drvdata(dev, NULL);
1707         pci_disable_device(dev);
1708 }
1709
1710 static int sm501_plat_remove(struct platform_device *dev)
1711 {
1712         struct sm501_devdata *sm = platform_get_drvdata(dev);
1713
1714         sm501_dev_remove(sm);
1715         iounmap(sm->regs);
1716
1717         release_resource(sm->regs_claim);
1718         kfree(sm->regs_claim);
1719
1720         return 0;
1721 }
1722
1723 static struct pci_device_id sm501_pci_tbl[] = {
1724         { 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1725         { 0, },
1726 };
1727
1728 MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
1729
1730 static struct pci_driver sm501_pci_driver = {
1731         .name           = "sm501",
1732         .id_table       = sm501_pci_tbl,
1733         .probe          = sm501_pci_probe,
1734         .remove         = __devexit_p(sm501_pci_remove),
1735 };
1736
1737 MODULE_ALIAS("platform:sm501");
1738
1739 static struct platform_driver sm501_plat_driver = {
1740         .driver         = {
1741                 .name   = "sm501",
1742                 .owner  = THIS_MODULE,
1743         },
1744         .probe          = sm501_plat_probe,
1745         .remove         = sm501_plat_remove,
1746         .suspend        = sm501_plat_suspend,
1747         .resume         = sm501_plat_resume,
1748 };
1749
1750 static int __init sm501_base_init(void)
1751 {
1752         platform_driver_register(&sm501_plat_driver);
1753         return pci_register_driver(&sm501_pci_driver);
1754 }
1755
1756 static void __exit sm501_base_exit(void)
1757 {
1758         platform_driver_unregister(&sm501_plat_driver);
1759         pci_unregister_driver(&sm501_pci_driver);
1760 }
1761
1762 module_init(sm501_base_init);
1763 module_exit(sm501_base_exit);
1764
1765 MODULE_DESCRIPTION("SM501 Core Driver");
1766 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders");
1767 MODULE_LICENSE("GPL v2");