git.oblomov.eu Git - linux-2.6/blob - arch/blackfin/mach-bf527/boards/ezbrd.c

   1 /*
   2  * File:         arch/blackfin/mach-bf527/boards/ezbrd.c
   3  * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2008 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/mtd/mtd.h>
  34 #include <linux/mtd/partitions.h>
  35 #include <linux/mtd/physmap.h>
  36 #include <linux/spi/spi.h>
  37 #include <linux/spi/flash.h>
  38
  39 #include <linux/i2c.h>
  40 #include <linux/irq.h>
  41 #include <linux/interrupt.h>
  42 #include <linux/usb/musb.h>
  43 #include <asm/dma.h>
  44 #include <asm/bfin5xx_spi.h>
  45 #include <asm/reboot.h>
  46 #include <asm/nand.h>
  47 #include <asm/portmux.h>
  48 #include <asm/dpmc.h>
  49 #include <linux/spi/ad7877.h>
  50
  51 /*
  52  * Name the Board for the /proc/cpuinfo
  53  */
  54 const char bfin_board_name[] = "ADI BF526-EZBRD";
  55
  56 /*
  57  *  Driver needs to know address, irq and flag pin.
  58  */
  59
  60 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
  61 static struct resource musb_resources[] = {
  62         [0] = {
  63                 .start  = 0xffc03800,
  64                 .end    = 0xffc03cff,
  65                 .flags  = IORESOURCE_MEM,
  66         },
  67         [1] = { /* general IRQ */
  68                 .start  = IRQ_USB_INT0,
  69                 .end    = IRQ_USB_INT0,
  70                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  71         },
  72         [2] = { /* DMA IRQ */
  73                 .start  = IRQ_USB_DMA,
  74                 .end    = IRQ_USB_DMA,
  75                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  76         },
  77 };
  78
  79 static struct musb_hdrc_config musb_config = {
  80         .multipoint     = 0,
  81         .dyn_fifo       = 0,
  82         .soft_con       = 1,
  83         .dma            = 1,
  84         .num_eps        = 8,
  85         .dma_channels   = 8,
  86         .gpio_vrsel     = GPIO_PG13,
  87 };
  88
  89 static struct musb_hdrc_platform_data musb_plat = {
  90 #if defined(CONFIG_USB_MUSB_OTG)
  91         .mode           = MUSB_OTG,
  92 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
  93         .mode           = MUSB_HOST,
  94 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
  95         .mode           = MUSB_PERIPHERAL,
  96 #endif
  97         .config         = &musb_config,
  98 };
  99
 100 static u64 musb_dmamask = ~(u32)0;
 101
 102 static struct platform_device musb_device = {
 103         .name           = "musb_hdrc",
 104         .id             = 0,
 105         .dev = {
 106                 .dma_mask               = &musb_dmamask,
 107                 .coherent_dma_mask      = 0xffffffff,
 108                 .platform_data          = &musb_plat,
 109         },
 110         .num_resources  = ARRAY_SIZE(musb_resources),
 111         .resource       = musb_resources,
 112 };
 113 #endif
 114
 115 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 116 static struct mtd_partition ezbrd_partitions[] = {
 117         {
 118                 .name       = "bootloader(nor)",
 119                 .size       = 0x40000,
 120                 .offset     = 0,
 121         }, {
 122                 .name       = "linux kernel(nor)",
 123                 .size       = 0x1C0000,
 124                 .offset     = MTDPART_OFS_APPEND,
 125         }, {
 126                 .name       = "file system(nor)",
 127                 .size       = MTDPART_SIZ_FULL,
 128                 .offset     = MTDPART_OFS_APPEND,
 129         }
 130 };
 131
 132 static struct physmap_flash_data ezbrd_flash_data = {
 133         .width      = 2,
 134         .parts      = ezbrd_partitions,
 135         .nr_parts   = ARRAY_SIZE(ezbrd_partitions),
 136 };
 137
 138 static struct resource ezbrd_flash_resource = {
 139         .start = 0x20000000,
 140         .end   = 0x203fffff,
 141         .flags = IORESOURCE_MEM,
 142 };
 143
 144 static struct platform_device ezbrd_flash_device = {
 145         .name          = "physmap-flash",
 146         .id            = 0,
 147         .dev = {
 148                 .platform_data = &ezbrd_flash_data,
 149         },
 150         .num_resources = 1,
 151         .resource      = &ezbrd_flash_resource,
 152 };
 153 #endif
 154
 155 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 156 static struct mtd_partition partition_info[] = {
 157         {
 158                 .name = "linux kernel(nand)",
 159                 .offset = 0,
 160                 .size = 4 * 1024 * 1024,
 161         },
 162         {
 163                 .name = "file system(nand)",
 164                 .offset = MTDPART_OFS_APPEND,
 165                 .size = MTDPART_SIZ_FULL,
 166         },
 167 };
 168
 169 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 170         .page_size = NFC_PG_SIZE_256,
 171         .data_width = NFC_NWIDTH_8,
 172         .partitions = partition_info,
 173         .nr_partitions = ARRAY_SIZE(partition_info),
 174         .rd_dly = 3,
 175         .wr_dly = 3,
 176 };
 177
 178 static struct resource bf5xx_nand_resources[] = {
 179         {
 180                 .start = NFC_CTL,
 181                 .end = NFC_DATA_RD + 2,
 182                 .flags = IORESOURCE_MEM,
 183         },
 184         {
 185                 .start = CH_NFC,
 186                 .end = CH_NFC,
 187                 .flags = IORESOURCE_IRQ,
 188         },
 189 };
 190
 191 static struct platform_device bf5xx_nand_device = {
 192         .name = "bf5xx-nand",
 193         .id = 0,
 194         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 195         .resource = bf5xx_nand_resources,
 196         .dev = {
 197                 .platform_data = &bf5xx_nand_platform,
 198         },
 199 };
 200 #endif
 201
 202 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 203 static struct platform_device rtc_device = {
 204         .name = "rtc-bfin",
 205         .id   = -1,
 206 };
 207 #endif
 208
 209
 210 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 211 static struct platform_device bfin_mac_device = {
 212         .name = "bfin_mac",
 213 };
 214 #endif
 215
 216 #if defined(CONFIG_MTD_M25P80) \
 217         || defined(CONFIG_MTD_M25P80_MODULE)
 218 static struct mtd_partition bfin_spi_flash_partitions[] = {
 219         {
 220                 .name = "bootloader(spi)",
 221                 .size = 0x00040000,
 222                 .offset = 0,
 223                 .mask_flags = MTD_CAP_ROM
 224         }, {
 225                 .name = "linux kernel(spi)",
 226                 .size = MTDPART_SIZ_FULL,
 227                 .offset = MTDPART_OFS_APPEND,
 228         }
 229 };
 230
 231 static struct flash_platform_data bfin_spi_flash_data = {
 232         .name = "m25p80",
 233         .parts = bfin_spi_flash_partitions,
 234         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 235         .type = "m25p16",
 236 };
 237
 238 /* SPI flash chip (m25p64) */
 239 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 240         .enable_dma = 0,         /* use dma transfer with this chip*/
 241         .bits_per_word = 8,
 242 };
 243 #endif
 244
 245 #if defined(CONFIG_SPI_ADC_BF533) \
 246         || defined(CONFIG_SPI_ADC_BF533_MODULE)
 247 /* SPI ADC chip */
 248 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 249         .enable_dma = 1,         /* use dma transfer with this chip*/
 250         .bits_per_word = 16,
 251 };
 252 #endif
 253
 254 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 255 static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 256         .enable_dma = 1,
 257         .bits_per_word = 8,
 258 };
 259 #endif
 260
 261 #if defined(CONFIG_PBX)
 262 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 263         .ctl_reg        = 0x4, /* send zero */
 264         .enable_dma     = 0,
 265         .bits_per_word  = 8,
 266         .cs_change_per_word = 1,
 267 };
 268 #endif
 269
 270 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 271 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 272         .enable_dma = 0,
 273         .bits_per_word = 16,
 274 };
 275
 276 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 277         .model                  = 7877,
 278         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 279         .x_plate_ohms           = 419,
 280         .y_plate_ohms           = 486,
 281         .pressure_max           = 1000,
 282         .pressure_min           = 0,
 283         .stopacq_polarity       = 1,
 284         .first_conversion_delay = 3,
 285         .acquisition_time       = 1,
 286         .averaging              = 1,
 287         .pen_down_acc_interval  = 1,
 288 };
 289 #endif
 290
 291 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 292 #include <linux/spi/ad7879.h>
 293 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 294         .model                  = 7879, /* Model = AD7879 */
 295         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 296         .pressure_max           = 10000,
 297         .pressure_min           = 0,
 298         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 299         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 300         .median                 = 2,    /* do 8 measurements */
 301         .averaging              = 1,    /* take the average of 4 middle samples */
 302         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 303         .gpio_output            = 1,    /* configure AUX/VBAT/GPIO as GPIO output */
 304         .gpio_default           = 1,    /* During initialization set GPIO = HIGH */
 305 };
 306 #endif
 307
 308 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 309 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 310         .enable_dma = 0,
 311         .bits_per_word = 16,
 312 };
 313 #endif
 314
 315 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
 316          && defined(CONFIG_SND_SOC_WM8731_SPI)
 317 static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
 318         .enable_dma = 0,
 319         .bits_per_word = 16,
 320 };
 321 #endif
 322
 323 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 324 static struct bfin5xx_spi_chip spidev_chip_info = {
 325         .enable_dma = 0,
 326         .bits_per_word = 8,
 327 };
 328 #endif
 329
 330 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 331 static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
 332         .enable_dma = 0,
 333         .bits_per_word = 8,
 334 };
 335 #endif
 336
 337 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 338 #if defined(CONFIG_MTD_M25P80) \
 339         || defined(CONFIG_MTD_M25P80_MODULE)
 340         {
 341                 /* the modalias must be the same as spi device driver name */
 342                 .modalias = "m25p80", /* Name of spi_driver for this device */
 343                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 344                 .bus_num = 0, /* Framework bus number */
 345                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 346                 .platform_data = &bfin_spi_flash_data,
 347                 .controller_data = &spi_flash_chip_info,
 348                 .mode = SPI_MODE_3,
 349         },
 350 #endif
 351
 352 #if defined(CONFIG_SPI_ADC_BF533) \
 353         || defined(CONFIG_SPI_ADC_BF533_MODULE)
 354         {
 355                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 356                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 357                 .bus_num = 0, /* Framework bus number */
 358                 .chip_select = 1, /* Framework chip select. */
 359                 .platform_data = NULL, /* No spi_driver specific config */
 360                 .controller_data = &spi_adc_chip_info,
 361         },
 362 #endif
 363
 364 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 365         {
 366                 .modalias = "spi_mmc_dummy",
 367                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 368                 .bus_num = 0,
 369                 .chip_select = 0,
 370                 .platform_data = NULL,
 371                 .controller_data = &spi_mmc_chip_info,
 372                 .mode = SPI_MODE_3,
 373         },
 374         {
 375                 .modalias = "spi_mmc",
 376                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 377                 .bus_num = 0,
 378                 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
 379                 .platform_data = NULL,
 380                 .controller_data = &spi_mmc_chip_info,
 381                 .mode = SPI_MODE_3,
 382         },
 383 #endif
 384 #if defined(CONFIG_PBX)
 385         {
 386                 .modalias = "fxs-spi",
 387                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 388                 .bus_num = 0,
 389                 .chip_select = 8 - CONFIG_J11_JUMPER,
 390                 .controller_data = &spi_si3xxx_chip_info,
 391                 .mode = SPI_MODE_3,
 392         },
 393         {
 394                 .modalias = "fxo-spi",
 395                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 396                 .bus_num = 0,
 397                 .chip_select = 8 - CONFIG_J19_JUMPER,
 398                 .controller_data = &spi_si3xxx_chip_info,
 399                 .mode = SPI_MODE_3,
 400         },
 401 #endif
 402 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 403         {
 404                 .modalias               = "ad7877",
 405                 .platform_data          = &bfin_ad7877_ts_info,
 406                 .irq                    = IRQ_PF8,
 407                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 408                 .bus_num        = 0,
 409                 .chip_select  = 2,
 410                 .controller_data = &spi_ad7877_chip_info,
 411         },
 412 #endif
 413 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 414         {
 415                 .modalias = "ad7879",
 416                 .platform_data = &bfin_ad7879_ts_info,
 417                 .irq = IRQ_PG0,
 418                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 419                 .bus_num = 0,
 420                 .chip_select = 5,
 421                 .controller_data = &spi_ad7879_chip_info,
 422                 .mode = SPI_CPHA | SPI_CPOL,
 423         },
 424 #endif
 425 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
 426          && defined(CONFIG_SND_SOC_WM8731_SPI)
 427         {
 428                 .modalias       = "wm8731",
 429                 .max_speed_hz   = 3125000,     /* max spi clock (SCK) speed in HZ */
 430                 .bus_num        = 0,
 431                 .chip_select    = 5,
 432                 .controller_data = &spi_wm8731_chip_info,
 433                 .mode = SPI_MODE_0,
 434         },
 435 #endif
 436 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 437         {
 438                 .modalias = "spidev",
 439                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 440                 .bus_num = 0,
 441                 .chip_select = 1,
 442                 .controller_data = &spidev_chip_info,
 443         },
 444 #endif
 445 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 446         {
 447                 .modalias = "bfin-lq035q1-spi",
 448                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 449                 .bus_num = 0,
 450                 .chip_select = 1,
 451                 .controller_data = &lq035q1_spi_chip_info,
 452                 .mode = SPI_CPHA | SPI_CPOL,
 453         },
 454 #endif
 455 };
 456
 457 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 458 /* SPI controller data */
 459 static struct bfin5xx_spi_master bfin_spi0_info = {
 460         .num_chipselect = 8,
 461         .enable_dma = 1,  /* master has the ability to do dma transfer */
 462         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 463 };
 464
 465 /* SPI (0) */
 466 static struct resource bfin_spi0_resource[] = {
 467         [0] = {
 468                 .start = SPI0_REGBASE,
 469                 .end   = SPI0_REGBASE + 0xFF,
 470                 .flags = IORESOURCE_MEM,
 471                 },
 472         [1] = {
 473                 .start = CH_SPI,
 474                 .end   = CH_SPI,
 475                 .flags = IORESOURCE_IRQ,
 476         },
 477 };
 478
 479 static struct platform_device bfin_spi0_device = {
 480         .name = "bfin-spi",
 481         .id = 0, /* Bus number */
 482         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 483         .resource = bfin_spi0_resource,
 484         .dev = {
 485                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 486         },
 487 };
 488 #endif  /* spi master and devices */
 489
 490 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 491 static struct resource bfin_uart_resources[] = {
 492 #ifdef CONFIG_SERIAL_BFIN_UART0
 493         {
 494                 .start = 0xFFC00400,
 495                 .end = 0xFFC004FF,
 496                 .flags = IORESOURCE_MEM,
 497         },
 498 #endif
 499 #ifdef CONFIG_SERIAL_BFIN_UART1
 500         {
 501                 .start = 0xFFC02000,
 502                 .end = 0xFFC020FF,
 503                 .flags = IORESOURCE_MEM,
 504         },
 505 #endif
 506 };
 507
 508 static struct platform_device bfin_uart_device = {
 509         .name = "bfin-uart",
 510         .id = 1,
 511         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 512         .resource = bfin_uart_resources,
 513 };
 514 #endif
 515
 516 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 517 #ifdef CONFIG_BFIN_SIR0
 518 static struct resource bfin_sir0_resources[] = {
 519         {
 520                 .start = 0xFFC00400,
 521                 .end = 0xFFC004FF,
 522                 .flags = IORESOURCE_MEM,
 523         },
 524         {
 525                 .start = IRQ_UART0_RX,
 526                 .end = IRQ_UART0_RX+1,
 527                 .flags = IORESOURCE_IRQ,
 528         },
 529         {
 530                 .start = CH_UART0_RX,
 531                 .end = CH_UART0_RX+1,
 532                 .flags = IORESOURCE_DMA,
 533         },
 534 };
 535
 536 static struct platform_device bfin_sir0_device = {
 537         .name = "bfin_sir",
 538         .id = 0,
 539         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 540         .resource = bfin_sir0_resources,
 541 };
 542 #endif
 543 #ifdef CONFIG_BFIN_SIR1
 544 static struct resource bfin_sir1_resources[] = {
 545         {
 546                 .start = 0xFFC02000,
 547                 .end = 0xFFC020FF,
 548                 .flags = IORESOURCE_MEM,
 549         },
 550         {
 551                 .start = IRQ_UART1_RX,
 552                 .end = IRQ_UART1_RX+1,
 553                 .flags = IORESOURCE_IRQ,
 554         },
 555         {
 556                 .start = CH_UART1_RX,
 557                 .end = CH_UART1_RX+1,
 558                 .flags = IORESOURCE_DMA,
 559         },
 560 };
 561
 562 static struct platform_device bfin_sir1_device = {
 563         .name = "bfin_sir",
 564         .id = 1,
 565         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 566         .resource = bfin_sir1_resources,
 567 };
 568 #endif
 569 #endif
 570
 571 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 572 static struct resource bfin_twi0_resource[] = {
 573         [0] = {
 574                 .start = TWI0_REGBASE,
 575                 .end   = TWI0_REGBASE,
 576                 .flags = IORESOURCE_MEM,
 577         },
 578         [1] = {
 579                 .start = IRQ_TWI,
 580                 .end   = IRQ_TWI,
 581                 .flags = IORESOURCE_IRQ,
 582         },
 583 };
 584
 585 static struct platform_device i2c_bfin_twi_device = {
 586         .name = "i2c-bfin-twi",
 587         .id = 0,
 588         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 589         .resource = bfin_twi0_resource,
 590 };
 591 #endif
 592
 593 #ifdef CONFIG_I2C_BOARDINFO
 594 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 595 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 596         {
 597                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 598         },
 599 #endif
 600 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
 601         {
 602                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 603                 .irq = IRQ_PF8,
 604         },
 605 #endif
 606 };
 607 #endif
 608
 609 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 610 static struct platform_device bfin_sport0_uart_device = {
 611         .name = "bfin-sport-uart",
 612         .id = 0,
 613 };
 614
 615 static struct platform_device bfin_sport1_uart_device = {
 616         .name = "bfin-sport-uart",
 617         .id = 1,
 618 };
 619 #endif
 620
 621 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 622 #include <linux/input.h>
 623 #include <linux/gpio_keys.h>
 624
 625 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 626         {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
 627         {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
 628 };
 629
 630 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 631         .buttons        = bfin_gpio_keys_table,
 632         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 633 };
 634
 635 static struct platform_device bfin_device_gpiokeys = {
 636         .name      = "gpio-keys",
 637         .dev = {
 638                 .platform_data = &bfin_gpio_keys_data,
 639         },
 640 };
 641 #endif
 642
 643 static struct resource bfin_gpios_resources = {
 644         .start = 0,
 645         .end   = MAX_BLACKFIN_GPIOS - 1,
 646         .flags = IORESOURCE_IRQ,
 647 };
 648
 649 static struct platform_device bfin_gpios_device = {
 650         .name = "simple-gpio",
 651         .id = -1,
 652         .num_resources = 1,
 653         .resource = &bfin_gpios_resources,
 654 };
 655
 656 static const unsigned int cclk_vlev_datasheet[] =
 657 {
 658         VRPAIR(VLEV_100, 400000000),
 659         VRPAIR(VLEV_105, 426000000),
 660         VRPAIR(VLEV_110, 500000000),
 661         VRPAIR(VLEV_115, 533000000),
 662         VRPAIR(VLEV_120, 600000000),
 663 };
 664
 665 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 666         .tuple_tab = cclk_vlev_datasheet,
 667         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 668         .vr_settling_time = 25 /* us */,
 669 };
 670
 671 static struct platform_device bfin_dpmc = {
 672         .name = "bfin dpmc",
 673         .dev = {
 674                 .platform_data = &bfin_dmpc_vreg_data,
 675         },
 676 };
 677
 678 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 679 #include <asm/bfin-lq035q1.h>
 680
 681 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
 682         .mode =         LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
 683         .use_bl =       1,
 684         .gpio_bl =      GPIO_PG12,
 685 };
 686
 687 static struct resource bfin_lq035q1_resources[] = {
 688         {
 689                 .start = IRQ_PPI_ERROR,
 690                 .end = IRQ_PPI_ERROR,
 691                 .flags = IORESOURCE_IRQ,
 692         },
 693 };
 694
 695 static struct platform_device bfin_lq035q1_device = {
 696         .name           = "bfin-lq035q1",
 697         .id             = -1,
 698         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
 699         .resource       = bfin_lq035q1_resources,
 700         .dev            = {
 701                 .platform_data = &bfin_lq035q1_data,
 702         },
 703 };
 704 #endif
 705
 706 static struct platform_device *stamp_devices[] __initdata = {
 707
 708         &bfin_dpmc,
 709
 710 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 711         &bf5xx_nand_device,
 712 #endif
 713
 714 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 715         &rtc_device,
 716 #endif
 717
 718 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 719         &musb_device,
 720 #endif
 721
 722 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 723         &bfin_mac_device,
 724 #endif
 725
 726 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 727         &bfin_spi0_device,
 728 #endif
 729
 730 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 731         &bfin_uart_device,
 732 #endif
 733
 734 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 735         &bfin_lq035q1_device,
 736 #endif
 737
 738 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 739 #ifdef CONFIG_BFIN_SIR0
 740         &bfin_sir0_device,
 741 #endif
 742 #ifdef CONFIG_BFIN_SIR1
 743         &bfin_sir1_device,
 744 #endif
 745 #endif
 746
 747 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 748         &i2c_bfin_twi_device,
 749 #endif
 750
 751 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 752         &bfin_sport0_uart_device,
 753         &bfin_sport1_uart_device,
 754 #endif
 755
 756 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 757         &bfin_device_gpiokeys,
 758 #endif
 759
 760 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 761         &ezbrd_flash_device,
 762 #endif
 763
 764         &bfin_gpios_device,
 765 };
 766
 767 static int __init stamp_init(void)
 768 {
 769         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 770
 771 #ifdef CONFIG_I2C_BOARDINFO
 772         i2c_register_board_info(0, bfin_i2c_board_info,
 773                                 ARRAY_SIZE(bfin_i2c_board_info));
 774 #endif
 775
 776         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 777         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 778         return 0;
 779 }
 780
 781 arch_initcall(stamp_init);
 782
 783 void native_machine_restart(char *cmd)
 784 {
 785         /* workaround reboot hang when booting from SPI */
 786         if ((bfin_read_SYSCR() & 0x7) == 0x3)
 787                 bfin_gpio_reset_spi0_ssel1();
 788 }
 789
 790 void bfin_get_ether_addr(char *addr)
 791 {
 792         /* the MAC is stored in OTP memory page 0xDF */
 793         u32 ret;
 794         u64 otp_mac;
 795         u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
 796
 797         ret = otp_read(0xDF, 0x00, &otp_mac);
 798         if (!(ret & 0x1)) {
 799                 char *otp_mac_p = (char *)&otp_mac;
 800                 for (ret = 0; ret < 6; ++ret)
 801                         addr[ret] = otp_mac_p[5 - ret];
 802         }
 803 }
 804 EXPORT_SYMBOL(bfin_get_ether_addr);