2 * linux/arch/arm/mach-pxa/lubbock.c
4 * Support for the Intel DBPXA250 Development Platform.
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/major.h>
21 #include <linux/interrupt.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/partitions.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/ads7846.h>
27 #include <asm/arch/pxa2xx_spi.h>
29 #include <asm/setup.h>
30 #include <asm/memory.h>
31 #include <asm/mach-types.h>
32 #include <asm/hardware.h>
34 #include <asm/sizes.h>
36 #include <asm/mach/arch.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/irq.h>
39 #include <asm/mach/flash.h>
41 #include <asm/hardware/sa1111.h>
43 #include <asm/arch/pxa-regs.h>
44 #include <asm/arch/pxa2xx-regs.h>
45 #include <asm/arch/mfp-pxa25x.h>
46 #include <asm/arch/lubbock.h>
47 #include <asm/arch/udc.h>
48 #include <asm/arch/irda.h>
49 #include <asm/arch/pxafb.h>
50 #include <asm/arch/mmc.h>
55 static unsigned long lubbock_pin_config[] __initdata = {
56 GPIO15_nCS_1, /* CS1 - Flash */
57 GPIO79_nCS_3, /* CS3 - SMC ethernet */
87 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
90 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
92 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
96 local_irq_save(flags);
97 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
98 local_irq_restore(flags);
100 EXPORT_SYMBOL(lubbock_set_misc_wr);
102 static unsigned long lubbock_irq_enabled;
104 static void lubbock_mask_irq(unsigned int irq)
106 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
107 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
110 static void lubbock_unmask_irq(unsigned int irq)
112 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
113 /* the irq can be acknowledged only if deasserted, so it's done here */
114 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
115 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
118 static struct irq_chip lubbock_irq_chip = {
120 .ack = lubbock_mask_irq,
121 .mask = lubbock_mask_irq,
122 .unmask = lubbock_unmask_irq,
125 static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
127 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
129 GEDR(0) = GPIO_bit(0); /* clear our parent irq */
130 if (likely(pending)) {
131 irq = LUBBOCK_IRQ(0) + __ffs(pending);
132 desc = irq_desc + irq;
133 desc_handle_irq(irq, desc);
135 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
139 static void __init lubbock_init_irq(void)
145 /* setup extra lubbock irqs */
146 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
147 set_irq_chip(irq, &lubbock_irq_chip);
148 set_irq_handler(irq, handle_level_irq);
149 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
152 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
153 set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
158 static int lubbock_irq_resume(struct sys_device *dev)
160 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
164 static struct sysdev_class lubbock_irq_sysclass = {
166 .resume = lubbock_irq_resume,
169 static struct sys_device lubbock_irq_device = {
170 .cls = &lubbock_irq_sysclass,
173 static int __init lubbock_irq_device_init(void)
177 if (machine_is_lubbock()) {
178 ret = sysdev_class_register(&lubbock_irq_sysclass);
180 ret = sysdev_register(&lubbock_irq_device);
185 device_initcall(lubbock_irq_device_init);
189 static int lubbock_udc_is_connected(void)
191 return (LUB_MISC_RD & (1 << 9)) == 0;
194 static struct pxa2xx_udc_mach_info udc_info __initdata = {
195 .udc_is_connected = lubbock_udc_is_connected,
196 // no D+ pullup; lubbock can't connect/disconnect in software
199 static struct platform_device lub_audio_device = {
200 .name = "pxa2xx-ac97",
204 static struct resource sa1111_resources[] = {
208 .flags = IORESOURCE_MEM,
211 .start = LUBBOCK_SA1111_IRQ,
212 .end = LUBBOCK_SA1111_IRQ,
213 .flags = IORESOURCE_IRQ,
217 static struct platform_device sa1111_device = {
220 .num_resources = ARRAY_SIZE(sa1111_resources),
221 .resource = sa1111_resources,
224 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
225 * you can select it to replace the ucb1400 by switching the touchscreen cable
226 * (to J5) and poking board registers (as done below). Else it's only useful
227 * for the temperature sensors.
229 static struct pxa2xx_spi_master pxa_ssp_master_info = {
233 static struct platform_device pxa_ssp = {
234 .name = "pxa2xx-spi",
237 .platform_data = &pxa_ssp_master_info,
241 static int lubbock_ads7846_pendown_state(void)
243 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
247 static struct ads7846_platform_data ads_info = {
249 .vref_delay_usecs = 100, /* internal, no cap */
250 .get_pendown_state = lubbock_ads7846_pendown_state,
251 // .x_plate_ohms = 500, /* GUESS! */
252 // .y_plate_ohms = 500, /* GUESS! */
255 static void ads7846_cs(u32 command)
257 static const unsigned TS_nCS = 1 << 11;
258 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
261 static struct pxa2xx_spi_chip ads_hw = {
264 .cs_control = ads7846_cs,
267 static struct spi_board_info spi_board_info[] __initdata = { {
268 .modalias = "ads7846",
269 .platform_data = &ads_info,
270 .controller_data = &ads_hw,
271 .irq = LUBBOCK_BB_IRQ,
272 .max_speed_hz = 120000 /* max sample rate at 3V */
273 * 26 /* command + data + overhead */,
279 static struct resource smc91x_resources[] = {
281 .name = "smc91x-regs",
284 .flags = IORESOURCE_MEM,
287 .start = LUBBOCK_ETH_IRQ,
288 .end = LUBBOCK_ETH_IRQ,
289 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
292 .name = "smc91x-attrib",
295 .flags = IORESOURCE_MEM,
299 static struct platform_device smc91x_device = {
302 .num_resources = ARRAY_SIZE(smc91x_resources),
303 .resource = smc91x_resources,
306 static struct resource flash_resources[] = {
310 .flags = IORESOURCE_MEM,
314 .end = 0x04000000 + SZ_64M - 1,
315 .flags = IORESOURCE_MEM,
319 static struct mtd_partition lubbock_partitions[] = {
321 .name = "Bootloader",
324 .mask_flags = MTD_WRITEABLE /* force read-only */
328 .offset = 0x00040000,
330 .name = "Filesystem",
331 .size = MTDPART_SIZ_FULL,
336 static struct flash_platform_data lubbock_flash_data[2] = {
338 .map_name = "cfi_probe",
339 .parts = lubbock_partitions,
340 .nr_parts = ARRAY_SIZE(lubbock_partitions),
342 .map_name = "cfi_probe",
348 static struct platform_device lubbock_flash_device[2] = {
350 .name = "pxa2xx-flash",
353 .platform_data = &lubbock_flash_data[0],
355 .resource = &flash_resources[0],
359 .name = "pxa2xx-flash",
362 .platform_data = &lubbock_flash_data[1],
364 .resource = &flash_resources[1],
369 static struct platform_device *devices[] __initdata = {
373 &lubbock_flash_device[0],
374 &lubbock_flash_device[1],
378 static struct pxafb_mode_info sharp_lm8v31_mode = {
389 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
393 static struct pxafb_mach_info sharp_lm8v31 = {
394 .modes = &sharp_lm8v31_mode,
398 .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
399 LCD_AC_BIAS_FREQ(255);
402 #define MMC_POLL_RATE msecs_to_jiffies(1000)
404 static void lubbock_mmc_poll(unsigned long);
405 static irq_handler_t mmc_detect_int;
407 static struct timer_list mmc_timer = {
408 .function = lubbock_mmc_poll,
411 static void lubbock_mmc_poll(unsigned long data)
415 /* clear any previous irq state, then ... */
416 local_irq_save(flags);
417 LUB_IRQ_SET_CLR &= ~(1 << 0);
418 local_irq_restore(flags);
420 /* poll until mmc/sd card is removed */
421 if (LUB_IRQ_SET_CLR & (1 << 0))
422 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
424 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
425 enable_irq(LUBBOCK_SD_IRQ);
429 static irqreturn_t lubbock_detect_int(int irq, void *data)
431 /* IRQ is level triggered; disable, and poll for removal */
433 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
435 return mmc_detect_int(irq, data);
438 static int lubbock_mci_init(struct device *dev,
439 irq_handler_t detect_int,
442 /* detect card insert/eject */
443 mmc_detect_int = detect_int;
444 init_timer(&mmc_timer);
445 mmc_timer.data = (unsigned long) data;
446 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
447 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
450 static int lubbock_mci_get_ro(struct device *dev)
452 return (LUB_MISC_RD & (1 << 2)) != 0;
455 static void lubbock_mci_exit(struct device *dev, void *data)
457 free_irq(LUBBOCK_SD_IRQ, data);
458 del_timer_sync(&mmc_timer);
461 static struct pxamci_platform_data lubbock_mci_platform_data = {
462 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
464 .init = lubbock_mci_init,
465 .get_ro = lubbock_mci_get_ro,
466 .exit = lubbock_mci_exit,
469 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
473 local_irq_save(flags);
474 if (mode & IR_SIRMODE) {
475 LUB_MISC_WR &= ~(1 << 4);
476 } else if (mode & IR_FIRMODE) {
477 LUB_MISC_WR |= 1 << 4;
479 local_irq_restore(flags);
482 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
483 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
484 .transceiver_mode = lubbock_irda_transceiver_mode,
487 static void __init lubbock_init(void)
489 int flashboot = (LUB_CONF_SWITCHES & 1);
491 pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
493 pxa_set_udc_info(&udc_info);
494 set_pxa_fb_info(&sharp_lm8v31);
495 pxa_set_mci_info(&lubbock_mci_platform_data);
496 pxa_set_ficp_info(&lubbock_ficp_platform_data);
498 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
499 (BOOT_DEF & 1) ? 2 : 4;
500 /* Compensate for the nROMBT switch which swaps the flash banks */
501 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
502 flashboot?"Flash":"ROM", flashboot);
504 lubbock_flash_data[flashboot^1].name = "application-flash";
505 lubbock_flash_data[flashboot].name = "boot-rom";
506 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
508 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
511 static struct map_desc lubbock_io_desc[] __initdata = {
513 .virtual = LUBBOCK_FPGA_VIRT,
514 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
515 .length = 0x00100000,
520 static void __init lubbock_map_io(void)
523 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
528 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
529 /* Maintainer: MontaVista Software Inc. */
530 .phys_io = 0x40000000,
531 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
532 .map_io = lubbock_map_io,
533 .init_irq = lubbock_init_irq,
535 .init_machine = lubbock_init,