Merge master.kernel.org:/home/rmk/linux-2.6-arm
[linux-2.6] / arch / arm / mach-sa1100 / shannon.c
1 /*
2  * linux/arch/arm/mach-sa1100/shannon.c
3  */
4
5 #include <linux/init.h>
6 #include <linux/device.h>
7 #include <linux/kernel.h>
8 #include <linux/tty.h>
9 #include <linux/mtd/mtd.h>
10 #include <linux/mtd/partitions.h>
11
12 #include <mach/hardware.h>
13 #include <asm/mach-types.h>
14 #include <asm/setup.h>
15
16 #include <asm/mach/arch.h>
17 #include <asm/mach/flash.h>
18 #include <asm/mach/map.h>
19 #include <asm/mach/serial_sa1100.h>
20 #include <mach/mcp.h>
21 #include <mach/shannon.h>
22
23 #include "generic.h"
24
25 static struct mtd_partition shannon_partitions[] = {
26         {
27                 .name           = "BLOB boot loader",
28                 .offset         = 0,
29                 .size           = 0x20000
30         },
31         {
32                 .name           = "kernel",
33                 .offset         = MTDPART_OFS_APPEND,
34                 .size           = 0xe0000
35         },
36         {
37                 .name           = "initrd",
38                 .offset         = MTDPART_OFS_APPEND,   
39                 .size           = MTDPART_SIZ_FULL
40         }
41 };
42
43 static struct flash_platform_data shannon_flash_data = {
44         .map_name       = "cfi_probe",
45         .parts          = shannon_partitions,
46         .nr_parts       = ARRAY_SIZE(shannon_partitions),
47 };
48
49 static struct resource shannon_flash_resource = {
50         .start          = SA1100_CS0_PHYS,
51         .end            = SA1100_CS0_PHYS + SZ_4M - 1,
52         .flags          = IORESOURCE_MEM,
53 };
54
55 static struct mcp_plat_data shannon_mcp_data = {
56         .mccr0          = MCCR0_ADM,
57         .sclk_rate      = 11981000,
58 };
59
60 static void __init shannon_init(void)
61 {
62         sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1);
63         sa11x0_set_mcp_data(&shannon_mcp_data);
64 }
65
66 static void __init shannon_map_io(void)
67 {
68         sa1100_map_io();
69
70         sa1100_register_uart(0, 3);
71         sa1100_register_uart(1, 1);
72
73         Ser1SDCR0 |= SDCR0_SUS;
74         GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
75         GPDR |= GPIO_UART_TXD | SHANNON_GPIO_CODEC_RESET;
76         GPDR &= ~GPIO_UART_RXD;
77         PPAR |= PPAR_UPR;
78
79         /* reset the codec */
80         GPCR = SHANNON_GPIO_CODEC_RESET;
81         GPSR = SHANNON_GPIO_CODEC_RESET;
82 }
83
84 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
85         .phys_io        = 0x80000000,
86         .io_pg_offst    = ((0xf8000000) >> 18) & 0xfffc,
87         .boot_params    = 0xc0000100,
88         .map_io         = shannon_map_io,
89         .init_irq       = sa1100_init_irq,
90         .timer          = &sa1100_timer,
91         .init_machine   = shannon_init,
92 MACHINE_END