5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/firmware.h>
35 #include <net/checksum.h>
40 #include <media/v4l2-common.h>
41 #include <media/tvaudio.h>
44 static void boot_msp34xx(struct bttv *btv, int pin);
45 static void boot_bt832(struct bttv *btv);
46 static void hauppauge_eeprom(struct bttv *btv);
47 static void avermedia_eeprom(struct bttv *btv);
48 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
49 static void modtec_eeprom(struct bttv *btv);
50 static void init_PXC200(struct bttv *btv);
51 static void init_RTV24(struct bttv *btv);
53 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
54 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
55 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
57 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
59 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
60 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
61 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
62 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
63 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
64 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
65 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
66 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
67 static void rv605_muxsel(struct bttv *btv, unsigned int input);
68 static void eagle_muxsel(struct bttv *btv, unsigned int input);
69 static void xguard_muxsel(struct bttv *btv, unsigned int input);
70 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
71 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
73 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
75 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
76 static void picolo_tetra_init(struct bttv *btv);
78 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
79 static void tibetCS16_init(struct bttv *btv);
81 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
82 static void kodicom4400r_init(struct bttv *btv);
84 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
85 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
87 static int terratec_active_radio_upgrade(struct bttv *btv);
88 static int tea5757_read(struct bttv *btv);
89 static int tea5757_write(struct bttv *btv, int value);
90 static void identify_by_eeprom(struct bttv *btv,
91 unsigned char eeprom_data[256]);
92 static int __devinit pvr_boot(struct bttv *btv);
94 /* config variables */
95 static unsigned int triton1;
96 static unsigned int vsfx;
97 static unsigned int latency = UNSET;
100 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
104 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
105 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
107 static unsigned int autoload = 1;
109 static unsigned int autoload;
111 static unsigned int gpiomask = UNSET;
112 static unsigned int audioall = UNSET;
113 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
116 module_param(triton1, int, 0444);
117 module_param(vsfx, int, 0444);
118 module_param(no_overlay, int, 0444);
119 module_param(latency, int, 0444);
120 module_param(gpiomask, int, 0444);
121 module_param(audioall, int, 0444);
122 module_param(autoload, int, 0444);
124 module_param_array(card, int, NULL, 0444);
125 module_param_array(pll, int, NULL, 0444);
126 module_param_array(tuner, int, NULL, 0444);
127 module_param_array(svhs, int, NULL, 0444);
128 module_param_array(remote, int, NULL, 0444);
129 module_param_array(audiomux, int, NULL, 0444);
131 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
132 "[enable bug compatibility for triton1 + others]");
133 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
134 "[yet another chipset flaw workaround]");
135 MODULE_PARM_DESC(latency,"pci latency timer");
136 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
137 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
138 MODULE_PARM_DESC(tuner,"specify installed tuner type");
139 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
140 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
141 " [some VIA/SIS chipsets are known to have problem with overlay]");
143 /* ----------------------------------------------------------------------- */
144 /* list of card IDs for bt878+ cards */
150 } cards[] __devinitdata = {
151 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
152 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
153 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
154 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
155 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
156 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
157 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
158 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
159 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
161 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
162 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
164 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
165 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
166 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
167 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
168 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
169 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
170 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
171 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
172 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
174 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 /* some cards ship with byteswapped IDs ... */
176 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
177 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
178 /* this seems to happen as well ... */
179 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
181 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
182 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
183 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
185 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
186 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
187 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
188 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
189 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
190 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
191 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
193 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
194 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
195 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
196 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
197 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
199 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
200 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
201 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
202 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
204 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
205 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
206 /* clashes with FlyVideo
207 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
208 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
209 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
210 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
211 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
213 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
219 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
220 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
221 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
222 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
223 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
225 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
226 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
227 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
228 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
230 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
231 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
232 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
233 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
235 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
236 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
237 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
238 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
239 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
240 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
241 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
242 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
243 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
244 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
245 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
261 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
262 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
264 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
265 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
266 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
267 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
268 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
269 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
271 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
272 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
274 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
275 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
276 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
277 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
278 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
279 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
280 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
281 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
282 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
284 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
285 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
287 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
288 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
289 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
290 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
292 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
294 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
295 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
297 /* likely broken, vendor id doesn't match the other magic views ...
298 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
300 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
301 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
303 /* DVB cards (using pci function .1 for mpeg data xfer) */
304 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
305 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
306 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
307 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
308 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
309 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
310 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
311 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
312 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
313 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
314 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
315 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
316 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
321 /* ----------------------------------------------------------------------- */
322 /* array with description for bt848 / bt878 tv/grabber cards */
324 struct tvcard bttv_tvcards[] = {
325 /* ---- card 0x00 ---------------------------------- */
326 [BTTV_BOARD_UNKNOWN] = {
327 .name = " *** UNKNOWN/GENERIC *** ",
332 .muxsel = { 2, 3, 1, 0 },
334 .tuner_addr = ADDR_UNSET,
335 .radio_addr = ADDR_UNSET,
337 [BTTV_BOARD_MIRO] = {
344 .muxsel = { 2, 3, 1, 1 },
345 .gpiomux = { 2, 0, 0, 0 },
349 .tuner_addr = ADDR_UNSET,
350 .radio_addr = ADDR_UNSET,
352 [BTTV_BOARD_HAUPPAUGE] = {
353 .name = "Hauppauge (bt848)",
359 .muxsel = { 2, 3, 1, 1 },
360 .gpiomux = { 0, 1, 2, 3 },
364 .tuner_addr = ADDR_UNSET,
365 .radio_addr = ADDR_UNSET,
368 .name = "STB, Gateway P/N 6000699 (bt848)",
374 .muxsel = { 2, 3, 1, 1 },
375 .gpiomux = { 4, 0, 2, 3 },
379 .tuner_type = TUNER_PHILIPS_NTSC,
380 .tuner_addr = ADDR_UNSET,
381 .radio_addr = ADDR_UNSET,
386 /* ---- card 0x04 ---------------------------------- */
387 [BTTV_BOARD_INTEL] = {
388 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
394 .muxsel = { 2, 3, 1, 1 },
397 .tuner_type = TUNER_ABSENT,
398 .tuner_addr = ADDR_UNSET,
399 .radio_addr = ADDR_UNSET,
401 [BTTV_BOARD_DIAMOND] = {
402 .name = "Diamond DTV2000",
408 .muxsel = { 2, 3, 1, 0 },
409 .gpiomux = { 0, 1, 0, 1 },
413 .tuner_addr = ADDR_UNSET,
414 .radio_addr = ADDR_UNSET,
416 [BTTV_BOARD_AVERMEDIA] = {
417 .name = "AVerMedia TVPhone",
422 .muxsel = { 2, 3, 1, 1 },
424 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
425 /* 0x04 for some cards ?? */
428 .tuner_addr = ADDR_UNSET,
429 .radio_addr = ADDR_UNSET,
430 .audio_hook = avermedia_tvphone_audio,
433 [BTTV_BOARD_MATRIX_VISION] = {
434 .name = "MATRIX-Vision MV-Delta",
440 .muxsel = { 2, 3, 1, 0, 0 },
444 .tuner_addr = ADDR_UNSET,
445 .radio_addr = ADDR_UNSET,
448 /* ---- card 0x08 ---------------------------------- */
449 [BTTV_BOARD_FLYVIDEO] = {
450 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
456 .muxsel = { 2, 3, 1, 1 },
457 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
462 .tuner_addr = ADDR_UNSET,
463 .radio_addr = ADDR_UNSET,
465 [BTTV_BOARD_TURBOTV] = {
466 .name = "IMS/IXmicro TurboTV",
472 .muxsel = { 2, 3, 1, 1 },
473 .gpiomux = { 1, 1, 2, 3 },
476 .tuner_type = TUNER_TEMIC_PAL,
477 .tuner_addr = ADDR_UNSET,
478 .radio_addr = ADDR_UNSET,
480 [BTTV_BOARD_HAUPPAUGE878] = {
481 .name = "Hauppauge (bt878)",
486 .gpiomask = 0x0f, /* old: 7 */
487 .muxsel = { 2, 0, 1, 1 },
488 .gpiomux = { 0, 1, 2, 3 },
493 .tuner_addr = ADDR_UNSET,
494 .radio_addr = ADDR_UNSET,
496 [BTTV_BOARD_MIROPRO] = {
497 .name = "MIRO PCTV pro",
503 .muxsel = { 2, 3, 1, 1 },
504 .gpiomux = { 0x20001,0x10001, 0, 0 },
508 .tuner_addr = ADDR_UNSET,
509 .radio_addr = ADDR_UNSET,
512 /* ---- card 0x0c ---------------------------------- */
513 [BTTV_BOARD_ADSTECH_TV] = {
514 .name = "ADS Technologies Channel Surfer TV (bt848)",
520 .muxsel = { 2, 3, 1, 1 },
521 .gpiomux = { 13, 14, 11, 7 },
524 .tuner_addr = ADDR_UNSET,
525 .radio_addr = ADDR_UNSET,
527 [BTTV_BOARD_AVERMEDIA98] = {
528 .name = "AVerMedia TVCapture 98",
534 .muxsel = { 2, 3, 1, 1 },
535 .gpiomux = { 13, 14, 11, 7 },
539 .tuner_type = TUNER_PHILIPS_PAL,
540 .tuner_addr = ADDR_UNSET,
541 .radio_addr = ADDR_UNSET,
542 .audio_hook = avermedia_tv_stereo_audio,
546 .name = "Aimslab Video Highway Xtreme (VHX)",
552 .muxsel = { 2, 3, 1, 1 },
553 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
558 .tuner_addr = ADDR_UNSET,
559 .radio_addr = ADDR_UNSET,
561 [BTTV_BOARD_ZOLTRIX] = {
562 .name = "Zoltrix TV-Max",
568 .muxsel = { 2, 3, 1, 1 },
569 .gpiomux = { 0, 0, 1, 0 },
573 .tuner_addr = ADDR_UNSET,
574 .radio_addr = ADDR_UNSET,
577 /* ---- card 0x10 ---------------------------------- */
578 [BTTV_BOARD_PIXVIEWPLAYTV] = {
579 .name = "Prolink Pixelview PlayTV (bt878)",
584 .gpiomask = 0x01fe00,
585 .muxsel = { 2, 3, 1, 1 },
586 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
587 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
588 .gpiomute = 0x002000,
593 [BTTV_BOARD_WINVIEW_601] = {
594 .name = "Leadtek WinView 601",
599 .gpiomask = 0x8300f8,
600 .muxsel = { 2, 3, 1, 1,0 },
601 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
602 .gpiomute = 0xcfa007,
605 .tuner_addr = ADDR_UNSET,
606 .radio_addr = ADDR_UNSET,
607 .audio_hook = winview_audio,
610 [BTTV_BOARD_AVEC_INTERCAP] = {
611 .name = "AVEC Intercapture",
617 .muxsel = { 2, 3, 1, 1 },
618 .gpiomux = { 1, 0, 0, 0 },
621 .tuner_addr = ADDR_UNSET,
622 .radio_addr = ADDR_UNSET,
624 [BTTV_BOARD_LIFE_FLYKIT] = {
625 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
630 .gpiomask = 0x8dff00,
631 .muxsel = { 2, 3, 1, 1 },
635 .tuner_addr = ADDR_UNSET,
636 .radio_addr = ADDR_UNSET,
639 /* ---- card 0x14 ---------------------------------- */
640 [BTTV_BOARD_CEI_RAFFLES] = {
641 .name = "CEI Raffles Card",
646 .muxsel = { 2, 3, 1, 1 },
648 .tuner_addr = ADDR_UNSET,
649 .radio_addr = ADDR_UNSET,
651 [BTTV_BOARD_CONFERENCETV] = {
652 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
654 .audio_inputs = 2, /* tuner, line in */
658 .muxsel = { 2, 3, 1, 1 },
659 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
662 .tuner_type = TUNER_PHILIPS_PAL_I,
663 .tuner_addr = ADDR_UNSET,
664 .radio_addr = ADDR_UNSET,
666 [BTTV_BOARD_PHOEBE_TVMAS] = {
667 .name = "Askey CPH050/ Phoebe Tv Master + FM",
673 .muxsel = { 2, 3, 1, 1 },
674 .gpiomux = { 0, 1, 0x800, 0x400 },
679 .tuner_addr = ADDR_UNSET,
680 .radio_addr = ADDR_UNSET,
682 [BTTV_BOARD_MODTEC_205] = {
683 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
689 .muxsel = { 2, 3, -1 },
690 .digital_mode = DIGITAL_MODE_CAMERA,
691 .gpiomux = { 0, 0, 0, 0 },
694 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
695 .tuner_addr = ADDR_UNSET,
696 .radio_addr = ADDR_UNSET,
699 /* ---- card 0x18 ---------------------------------- */
700 [BTTV_BOARD_MAGICTVIEW061] = {
701 .name = "Askey CPH05X/06X (bt878) [many vendors]",
707 .muxsel = { 2, 3, 1, 1 },
708 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
713 .tuner_addr = ADDR_UNSET,
714 .radio_addr = ADDR_UNSET,
717 [BTTV_BOARD_VOBIS_BOOSTAR] = {
718 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
723 .gpiomask = 0x1f0fff,
724 .muxsel = { 2, 3, 1, 1 },
725 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
728 .tuner_type = TUNER_PHILIPS_PAL,
729 .tuner_addr = ADDR_UNSET,
730 .radio_addr = ADDR_UNSET,
731 .audio_hook = terratv_audio,
733 [BTTV_BOARD_HAUPPAUG_WCAM] = {
734 .name = "Hauppauge WinCam newer (bt878)",
740 .muxsel = { 2, 0, 1, 1 },
741 .gpiomux = { 0, 1, 2, 3 },
745 .tuner_addr = ADDR_UNSET,
746 .radio_addr = ADDR_UNSET,
748 [BTTV_BOARD_MAXI] = {
749 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
755 .muxsel = { 2, 3, 1, 1 },
756 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
759 .tuner_type = TUNER_PHILIPS_SECAM,
760 .tuner_addr = ADDR_UNSET,
761 .radio_addr = ADDR_UNSET,
764 /* ---- card 0x1c ---------------------------------- */
765 [BTTV_BOARD_TERRATV] = {
766 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
771 .gpiomask = 0x1f0fff,
772 .muxsel = { 2, 3, 1, 1 },
773 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
776 .tuner_type = TUNER_PHILIPS_PAL,
777 .tuner_addr = ADDR_UNSET,
778 .radio_addr = ADDR_UNSET,
779 .audio_hook = terratv_audio,
781 External 20 pin connector (for Active Radio Upgrade board)
787 gpio05: om5610-stereo
791 gpio09+10: nIOR, nSEL ?? (bt878)
795 gpio16: u2-A0 (1st 4052bt)
798 gpio19: u4-A0 (2nd 4052)
802 00000 : Cdrom (internal audio input)
803 10000 : ext. Video audio input
812 [BTTV_BOARD_PXC200] = {
813 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
814 .name = "Imagenation PXC200",
818 .svhs = 1, /* was: 4 */
820 .muxsel = { 2, 3, 1, 0, 0},
824 .tuner_addr = ADDR_UNSET,
825 .radio_addr = ADDR_UNSET,
826 .muxsel_hook = PXC200_muxsel,
829 [BTTV_BOARD_FLYVIDEO_98] = {
830 .name = "Lifeview FlyVideo 98 LR50",
835 .gpiomask = 0x1800, /* 0x8dfe00 */
836 .muxsel = { 2, 3, 1, 1 },
837 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
841 .tuner_addr = ADDR_UNSET,
842 .radio_addr = ADDR_UNSET,
844 [BTTV_BOARD_IPROTV] = {
845 .name = "Formac iProTV, Formac ProTV I (bt848)",
851 .muxsel = { 2, 3, 1, 1 },
852 .gpiomux = { 1, 0, 0, 0 },
854 .tuner_type = TUNER_PHILIPS_PAL,
855 .tuner_addr = ADDR_UNSET,
856 .radio_addr = ADDR_UNSET,
859 /* ---- card 0x20 ---------------------------------- */
860 [BTTV_BOARD_INTEL_C_S_PCI] = {
861 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
867 .muxsel = { 2, 3, 1, 1 },
870 .tuner_type = TUNER_ABSENT,
871 .tuner_addr = ADDR_UNSET,
872 .radio_addr = ADDR_UNSET,
874 [BTTV_BOARD_TERRATVALUE] = {
875 .name = "Terratec TerraTValue Version Bt878",
880 .gpiomask = 0xffff00,
881 .muxsel = { 2, 3, 1, 1 },
882 .gpiomux = { 0x500, 0, 0x300, 0x900 },
886 .tuner_type = TUNER_PHILIPS_PAL,
887 .tuner_addr = ADDR_UNSET,
888 .radio_addr = ADDR_UNSET,
890 [BTTV_BOARD_WINFAST2000] = {
891 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
896 .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
897 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
898 .gpiomask = 0xb33000,
899 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
900 .gpiomute = 0x800000,
901 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
902 gpio23 -- hef4052:nEnable (0x800000)
905 0x0000: external audio
909 Note: There exists another variant "Winfast 2000" with tv stereo !?
910 Note: eeprom only contains FF and pci subsystem id 107d:6606
915 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
916 .tuner_addr = ADDR_UNSET,
917 .radio_addr = ADDR_UNSET,
918 .audio_hook = winfast2000_audio,
921 [BTTV_BOARD_CHRONOS_VS2] = {
922 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
928 .muxsel = { 2, 3, 1, 1 },
929 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
933 .tuner_addr = ADDR_UNSET,
934 .radio_addr = ADDR_UNSET,
937 /* ---- card 0x24 ---------------------------------- */
938 [BTTV_BOARD_TYPHOON_TVIEW] = {
939 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
945 .muxsel = { 2, 3, 1, 1 },
946 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
950 .tuner_addr = ADDR_UNSET,
951 .radio_addr = ADDR_UNSET,
954 [BTTV_BOARD_PXELVWPLTVPRO] = {
955 .name = "Prolink PixelView PlayTV pro",
961 .muxsel = { 2, 3, 1, 1 },
962 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
967 .tuner_addr = ADDR_UNSET,
968 .radio_addr = ADDR_UNSET,
970 [BTTV_BOARD_MAGICTVIEW063] = {
971 .name = "Askey CPH06X TView99",
976 .gpiomask = 0x551e00,
977 .muxsel = { 2, 3, 1, 0 },
978 .gpiomux = { 0x551400, 0x551200, 0, 0 },
979 .gpiomute = 0x551c00,
982 .tuner_type = TUNER_PHILIPS_PAL_I,
983 .tuner_addr = ADDR_UNSET,
984 .radio_addr = ADDR_UNSET,
987 [BTTV_BOARD_PINNACLE] = {
988 .name = "Pinnacle PCTV Studio/Rave",
993 .gpiomask = 0x03000F,
994 .muxsel = { 2, 3, 1, 1 },
995 .gpiomux = { 2, 0xd0001, 0, 0 },
1000 .tuner_addr = ADDR_UNSET,
1001 .radio_addr = ADDR_UNSET,
1004 /* ---- card 0x28 ---------------------------------- */
1005 [BTTV_BOARD_STB2] = {
1006 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
1012 .muxsel = { 2, 3, 1, 1 },
1013 .gpiomux = { 4, 0, 2, 3 },
1017 .tuner_type = TUNER_PHILIPS_NTSC,
1018 .tuner_addr = ADDR_UNSET,
1019 .radio_addr = ADDR_UNSET,
1023 [BTTV_BOARD_AVPHONE98] = {
1024 .name = "AVerMedia TVPhone 98",
1030 .muxsel = { 2, 3, 1, 1 },
1031 .gpiomux = { 13, 4, 11, 7 },
1034 .tuner_type = UNSET,
1035 .tuner_addr = ADDR_UNSET,
1036 .radio_addr = ADDR_UNSET,
1038 .audio_hook = avermedia_tvphone_audio,
1040 [BTTV_BOARD_PV951] = {
1041 .name = "ProVideo PV951", /* pic16c54 */
1047 .muxsel = { 2, 3, 1, 1},
1048 .gpiomux = { 0, 0, 0, 0},
1052 .tuner_type = TUNER_PHILIPS_PAL_I,
1053 .tuner_addr = ADDR_UNSET,
1054 .radio_addr = ADDR_UNSET,
1056 [BTTV_BOARD_ONAIR_TV] = {
1057 .name = "Little OnAir TV",
1063 .muxsel = { 2, 3, 1, 1 },
1064 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1065 .gpiomute = 0xff3ffc,
1067 .tuner_type = UNSET,
1068 .tuner_addr = ADDR_UNSET,
1069 .radio_addr = ADDR_UNSET,
1072 /* ---- card 0x2c ---------------------------------- */
1073 [BTTV_BOARD_SIGMA_TVII_FM] = {
1074 .name = "Sigma TVII-FM",
1080 .muxsel = { 2, 3, 1, 1 },
1081 .gpiomux = { 1, 1, 0, 2 },
1085 .tuner_type = UNSET,
1086 .tuner_addr = ADDR_UNSET,
1087 .radio_addr = ADDR_UNSET,
1089 [BTTV_BOARD_MATRIX_VISION2] = {
1090 .name = "MATRIX-Vision MV-Delta 2",
1096 .muxsel = { 2, 3, 1, 0, 0 },
1100 .tuner_type = UNSET,
1101 .tuner_addr = ADDR_UNSET,
1102 .radio_addr = ADDR_UNSET,
1104 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1105 .name = "Zoltrix Genie TV/FM",
1110 .gpiomask = 0xbcf03f,
1111 .muxsel = { 2, 3, 1, 1 },
1112 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1113 .gpiomute = 0xbcb03f,
1116 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1117 .tuner_addr = ADDR_UNSET,
1118 .radio_addr = ADDR_UNSET,
1120 [BTTV_BOARD_TERRATVRADIO] = {
1121 .name = "Terratec TV/Radio+",
1126 .gpiomask = 0x70000,
1127 .muxsel = { 2, 3, 1, 1 },
1128 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1129 .gpiomute = 0x40000,
1133 .tuner_type = TUNER_PHILIPS_PAL_I,
1134 .tuner_addr = ADDR_UNSET,
1135 .radio_addr = ADDR_UNSET,
1139 /* ---- card 0x30 ---------------------------------- */
1140 [BTTV_BOARD_DYNALINK] = {
1141 .name = "Askey CPH03x/ Dynalink Magic TView",
1147 .muxsel = { 2, 3, 1, 1 },
1148 .gpiomux = {2,0,0,0 },
1152 .tuner_type = UNSET,
1153 .tuner_addr = ADDR_UNSET,
1154 .radio_addr = ADDR_UNSET,
1156 [BTTV_BOARD_GVBCTV3PCI] = {
1157 .name = "IODATA GV-BCTV3/PCI",
1162 .gpiomask = 0x010f00,
1163 .muxsel = {2, 3, 0, 0 },
1164 .gpiomux = {0x10000, 0, 0x10000, 0 },
1167 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1168 .tuner_addr = ADDR_UNSET,
1169 .radio_addr = ADDR_UNSET,
1170 .audio_hook = gvbctv3pci_audio,
1172 [BTTV_BOARD_PXELVWPLTVPAK] = {
1173 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1178 .gpiomask = 0xAA0000,
1179 .muxsel = { 2,3,1,1,-1 },
1180 .digital_mode = DIGITAL_MODE_CAMERA,
1181 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1182 .gpiomute = 0xa8000,
1185 .tuner_type = TUNER_PHILIPS_PAL_I,
1186 .tuner_addr = ADDR_UNSET,
1187 .radio_addr = ADDR_UNSET,
1189 /* GPIO wiring: (different from Rev.4C !)
1190 GPIO17: U4.A0 (first hef4052bt)
1192 GPIO20: U5.A1 (second hef4052bt)
1194 GPIO22: BT832 Reset Line
1195 GPIO23: A5,A0, U5,nEN
1196 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1199 [BTTV_BOARD_EAGLE] = {
1200 .name = "Eagle Wireless Capricorn2 (bt878A)",
1206 .muxsel = { 2, 0, 1, 1 },
1207 .gpiomux = { 0, 1, 2, 3 },
1210 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1211 .tuner_addr = ADDR_UNSET,
1212 .radio_addr = ADDR_UNSET,
1215 /* ---- card 0x34 ---------------------------------- */
1216 [BTTV_BOARD_PINNACLEPRO] = {
1217 /* David Härdeman <david@2gen.com> */
1218 .name = "Pinnacle PCTV Studio Pro",
1223 .gpiomask = 0x03000F,
1224 .muxsel = { 2, 3, 1, 1 },
1225 .gpiomux = { 1, 0xd0001, 0, 0 },
1227 /* sound path (5 sources):
1228 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1231 2= Mono TV sound from Tuner
1233 MUX2 (mask 0x30000):
1235 1= FM stereo Radio from Tuner */
1238 .tuner_type = UNSET,
1239 .tuner_addr = ADDR_UNSET,
1240 .radio_addr = ADDR_UNSET,
1242 [BTTV_BOARD_TVIEW_RDS_FM] = {
1243 /* Claas Langbehn <claas@bigfoot.com>,
1244 Sven Grothklags <sven@upb.de> */
1245 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1251 .muxsel = { 2, 3, 1, 1 },
1252 .gpiomux = { 0, 0, 0x10, 8 },
1256 .tuner_type = TUNER_PHILIPS_PAL,
1257 .tuner_addr = ADDR_UNSET,
1258 .radio_addr = ADDR_UNSET,
1261 [BTTV_BOARD_LIFETEC_9415] = {
1262 /* Tim Röstermundt <rosterm@uni-muenster.de>
1263 in de.comp.os.unix.linux.hardware:
1264 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1265 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1266 options tuner type=5 */
1267 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1273 .muxsel = { 2, 3, 1, 1 },
1274 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1276 /* For cards with tda9820/tda9821:
1277 0x0000: Tuner normal stereo
1278 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1279 0x0880: Tuner A2 stereo */
1281 .tuner_type = UNSET,
1282 .tuner_addr = ADDR_UNSET,
1283 .radio_addr = ADDR_UNSET,
1285 [BTTV_BOARD_BESTBUY_EASYTV] = {
1286 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1287 old Easy TV BT848 version (model CPH031) */
1288 .name = "Askey CPH031/ BESTBUY Easy TV",
1294 .muxsel = { 2, 3, 1, 0 },
1295 .gpiomux = { 2, 0, 0, 0 },
1299 .tuner_type = TUNER_TEMIC_PAL,
1300 .tuner_addr = ADDR_UNSET,
1301 .radio_addr = ADDR_UNSET,
1304 /* ---- card 0x38 ---------------------------------- */
1305 [BTTV_BOARD_FLYVIDEO_98FM] = {
1306 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1307 .name = "Lifeview FlyVideo 98FM LR50",
1313 .muxsel = { 2, 3, 1, 1 },
1314 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1317 .tuner_type = TUNER_PHILIPS_PAL,
1318 .tuner_addr = ADDR_UNSET,
1319 .radio_addr = ADDR_UNSET,
1321 /* This is the ultimate cheapo capture card
1322 * just a BT848A on a small PCB!
1323 * Steve Hosgood <steve@equiinet.com> */
1324 [BTTV_BOARD_GRANDTEC] = {
1325 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1336 .tuner_type = UNSET,
1337 .tuner_addr = ADDR_UNSET,
1338 .radio_addr = ADDR_UNSET,
1340 [BTTV_BOARD_ASKEY_CPH060] = {
1341 /* Daniel Herrington <daniel.herrington@home.com> */
1342 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1348 .muxsel = { 2, 3, 1, 1},
1349 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1353 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1354 .tuner_addr = ADDR_UNSET,
1355 .radio_addr = ADDR_UNSET,
1357 [BTTV_BOARD_ASKEY_CPH03X] = {
1358 /* Matti Mottus <mottus@physic.ut.ee> */
1359 .name = "Askey CPH03x TV Capturer",
1364 .gpiomask = 0x03000F,
1365 .muxsel = { 2, 3, 1, 0 },
1366 .gpiomux = { 2, 0, 0, 0 },
1369 .tuner_type = TUNER_TEMIC_PAL,
1370 .tuner_addr = ADDR_UNSET,
1371 .radio_addr = ADDR_UNSET,
1374 /* ---- card 0x3c ---------------------------------- */
1375 [BTTV_BOARD_MM100PCTV] = {
1376 /* Philip Blundell <philb@gnu.org> */
1377 .name = "Modular Technology MM100PCTV",
1383 .muxsel = { 2, 3, 1, 1 },
1384 .gpiomux = { 2, 0, 0, 1 },
1387 .tuner_type = TUNER_TEMIC_PAL,
1388 .tuner_addr = ADDR_UNSET,
1389 .radio_addr = ADDR_UNSET,
1391 [BTTV_BOARD_GMV1] = {
1392 /* Adrian Cox <adrian@humboldt.co.uk */
1393 .name = "AG Electronics GMV1",
1404 .tuner_type = UNSET,
1405 .tuner_addr = ADDR_UNSET,
1406 .radio_addr = ADDR_UNSET,
1408 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1409 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1410 new Easy TV BT878 version (model CPH061)
1411 special thanks to Informatica Mieres for providing the card */
1412 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1418 .muxsel = { 2, 3, 1, 0 },
1419 .gpiomux = { 1, 0, 4, 4 },
1423 .tuner_type = TUNER_PHILIPS_PAL,
1424 .tuner_addr = ADDR_UNSET,
1425 .radio_addr = ADDR_UNSET,
1427 [BTTV_BOARD_ATI_TVWONDER] = {
1428 /* Lukas Gebauer <geby@volny.cz> */
1429 .name = "ATI TV-Wonder",
1435 .muxsel = { 2, 3, 1, 0 },
1436 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1439 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1440 .tuner_addr = ADDR_UNSET,
1441 .radio_addr = ADDR_UNSET,
1444 /* ---- card 0x40 ---------------------------------- */
1445 [BTTV_BOARD_ATI_TVWONDERVE] = {
1446 /* Lukas Gebauer <geby@volny.cz> */
1447 .name = "ATI TV-Wonder VE",
1453 .muxsel = { 2, 3, 0, 1 },
1454 .gpiomux = { 0, 0, 1, 0 },
1457 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1458 .tuner_addr = ADDR_UNSET,
1459 .radio_addr = ADDR_UNSET,
1461 [BTTV_BOARD_FLYVIDEO2000] = {
1462 /* DeeJay <deejay@westel900.net (2000S) */
1463 .name = "Lifeview FlyVideo 2000S LR90",
1469 .muxsel = { 2, 3, 0, 1 },
1470 /* Radio changed from 1e80 to 0x800 to make
1471 FlyVideo2000S in .hu happy (gm)*/
1472 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1473 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1475 .audio_hook = fv2000s_audio,
1480 .tuner_type = TUNER_PHILIPS_PAL,
1481 .tuner_addr = ADDR_UNSET,
1482 .radio_addr = ADDR_UNSET,
1484 [BTTV_BOARD_TERRATVALUER] = {
1485 .name = "Terratec TValueRadio",
1490 .gpiomask = 0xffff00,
1491 .muxsel = { 2, 3, 1, 1 },
1492 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1496 .tuner_type = TUNER_PHILIPS_PAL,
1497 .tuner_addr = ADDR_UNSET,
1498 .radio_addr = ADDR_UNSET,
1501 [BTTV_BOARD_GVBCTV4PCI] = {
1502 /* TANAKA Kei <peg00625@nifty.com> */
1503 .name = "IODATA GV-BCTV4/PCI",
1508 .gpiomask = 0x010f00,
1509 .muxsel = {2, 3, 0, 0 },
1510 .gpiomux = {0x10000, 0, 0x10000, 0 },
1513 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1514 .tuner_addr = ADDR_UNSET,
1515 .radio_addr = ADDR_UNSET,
1516 .audio_hook = gvbctv3pci_audio,
1519 /* ---- card 0x44 ---------------------------------- */
1520 [BTTV_BOARD_VOODOOTV_FM] = {
1521 .name = "3Dfx VoodooTV FM (Euro)",
1522 /* try "insmod msp3400 simple=0" if you have
1523 * sound problems with this card. */
1528 .gpiomask = 0x4f8a00,
1529 /* 0x100000: 1=MSP enabled (0=disable again)
1530 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1531 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1532 .gpiomute = 0x947fff,
1533 /* tvtuner, radio, external,internal, mute, stereo
1534 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1535 .muxsel = { 2, 3 ,0 ,1 },
1536 .tuner_type = TUNER_MT2032,
1537 .tuner_addr = ADDR_UNSET,
1538 .radio_addr = ADDR_UNSET,
1542 [BTTV_BOARD_VOODOOTV_200] = {
1543 .name = "VoodooTV 200 (USA)",
1544 /* try "insmod msp3400 simple=0" if you have
1545 * sound problems with this card. */
1550 .gpiomask = 0x4f8a00,
1551 /* 0x100000: 1=MSP enabled (0=disable again)
1552 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1553 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1554 .gpiomute = 0x947fff,
1555 /* tvtuner, radio, external,internal, mute, stereo
1556 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1557 .muxsel = { 2, 3 ,0 ,1 },
1558 .tuner_type = TUNER_MT2032,
1559 .tuner_addr = ADDR_UNSET,
1560 .radio_addr = ADDR_UNSET,
1564 [BTTV_BOARD_AIMMS] = {
1565 /* Philip Blundell <pb@nexus.co.uk> */
1566 .name = "Active Imaging AIMMS",
1570 .tuner_type = UNSET,
1571 .tuner_addr = ADDR_UNSET,
1572 .radio_addr = ADDR_UNSET,
1577 [BTTV_BOARD_PV_BT878P_PLUS] = {
1578 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1579 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1585 .muxsel = { 2, 3, 1, 1 },
1586 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1590 .tuner_type = TUNER_LG_PAL_I_FM,
1591 .tuner_addr = ADDR_UNSET,
1592 .radio_addr = ADDR_UNSET,
1595 GPIO0: U4.A0 (hef4052bt)
1597 GPIO2: U4.A1 (second hef4052bt)
1598 GPIO3: U4.nEN, U5.A0, A5.nEN
1602 [BTTV_BOARD_FLYVIDEO98EZ] = {
1603 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1608 .muxsel = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1611 .tuner_type = UNSET,
1612 .tuner_addr = ADDR_UNSET,
1613 .radio_addr = ADDR_UNSET,
1616 /* ---- card 0x48 ---------------------------------- */
1617 [BTTV_BOARD_PV_BT878P_9B] = {
1618 /* Dariusz Kowalewski <darekk@automex.pl> */
1619 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1625 .muxsel = { 2, 3, 1, 1 },
1626 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1632 .tuner_type = TUNER_PHILIPS_PAL,
1633 .tuner_addr = ADDR_UNSET,
1634 .radio_addr = ADDR_UNSET,
1635 .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */
1636 .has_radio = 1, /* Note: not all cards have radio */
1643 GPIO20,22,23: R30,R29,R28
1646 [BTTV_BOARD_SENSORAY311] = {
1647 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1648 /* you must jumper JP5 for the card to work */
1649 .name = "Sensoray 311",
1655 .muxsel = { 2, 3, 1, 0, 0 },
1658 .tuner_type = UNSET,
1659 .tuner_addr = ADDR_UNSET,
1660 .radio_addr = ADDR_UNSET,
1662 [BTTV_BOARD_RV605] = {
1663 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1664 .name = "RemoteVision MX (RV605)",
1670 .gpiomask2 = 0x07ff,
1671 .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1672 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1675 .tuner_type = UNSET,
1676 .tuner_addr = ADDR_UNSET,
1677 .radio_addr = ADDR_UNSET,
1678 .muxsel_hook = rv605_muxsel,
1680 [BTTV_BOARD_POWERCLR_MTV878] = {
1681 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1686 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1687 .muxsel = { 2, 1, 1, },
1688 .gpiomux = { 0, 1, 2, 2 },
1691 .tuner_type = TUNER_PHILIPS_PAL,
1692 .tuner_addr = ADDR_UNSET,
1693 .radio_addr = ADDR_UNSET,
1698 /* ---- card 0x4c ---------------------------------- */
1699 [BTTV_BOARD_WINDVR] = {
1700 /* Masaki Suzuki <masaki@btree.org> */
1701 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1706 .gpiomask = 0x140007,
1707 .muxsel = { 2, 3, 1, 1 },
1708 .gpiomux = { 0, 1, 2, 3 },
1710 .tuner_type = TUNER_PHILIPS_NTSC,
1711 .tuner_addr = ADDR_UNSET,
1712 .radio_addr = ADDR_UNSET,
1713 .audio_hook = windvr_audio,
1715 [BTTV_BOARD_GRANDTEC_MULTI] = {
1716 .name = "GrandTec Multi Capture Card (Bt878)",
1722 .muxsel = { 2, 3, 1, 0 },
1727 .tuner_type = UNSET,
1728 .tuner_addr = ADDR_UNSET,
1729 .radio_addr = ADDR_UNSET,
1731 [BTTV_BOARD_KWORLD] = {
1732 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1738 .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1739 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1740 * This card lacks external Audio In, so we mute it on Ext. & Int.
1741 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1742 * This card lacks PCI subsystem ID, sigh.
1743 * gpiomux =1: lower volume, 2+3: mute
1744 * btwincap uses 0x80000/0x80003
1750 .tuner_type = TUNER_PHILIPS_PAL,
1751 .tuner_addr = ADDR_UNSET,
1752 .radio_addr = ADDR_UNSET,
1753 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1754 radio signal strength indicators work fine. */
1757 GPIO0,1: HEF4052 A0,A1
1758 GPIO2: HEF4052 nENABLE
1760 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1764 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1766 [BTTV_BOARD_DSP_TCVIDEO] = {
1767 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1768 .name = "DSP Design TCVIDEO",
1771 .muxsel = { 2, 3, 1, 0 },
1773 .tuner_type = UNSET,
1774 .tuner_addr = ADDR_UNSET,
1775 .radio_addr = ADDR_UNSET,
1778 /* ---- card 0x50 ---------------------------------- */
1779 [BTTV_BOARD_HAUPPAUGEPVR] = {
1780 .name = "Hauppauge WinTV PVR",
1785 .muxsel = { 2, 0, 1, 1 },
1788 .tuner_type = UNSET,
1789 .tuner_addr = ADDR_UNSET,
1790 .radio_addr = ADDR_UNSET,
1795 [BTTV_BOARD_GVBCTV5PCI] = {
1796 .name = "IODATA GV-BCTV5/PCI",
1801 .gpiomask = 0x0f0f80,
1802 .muxsel = {2, 3, 1, 0 },
1803 .gpiomux = {0x030000, 0x010000, 0, 0 },
1804 .gpiomute = 0x020000,
1807 .tuner_type = TUNER_PHILIPS_NTSC_M,
1808 .tuner_addr = ADDR_UNSET,
1809 .radio_addr = ADDR_UNSET,
1810 .audio_hook = gvbctv5pci_audio,
1813 [BTTV_BOARD_OSPREY1x0] = {
1814 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1815 .video_inputs = 4, /* id-inputs-clock */
1819 .muxsel = { 3, 2, 0, 1 },
1821 .tuner_type = UNSET,
1822 .tuner_addr = ADDR_UNSET,
1823 .radio_addr = ADDR_UNSET,
1828 [BTTV_BOARD_OSPREY1x0_848] = {
1829 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1834 .muxsel = { 2, 3, 1 },
1836 .tuner_type = UNSET,
1837 .tuner_addr = ADDR_UNSET,
1838 .radio_addr = ADDR_UNSET,
1844 /* ---- card 0x54 ---------------------------------- */
1845 [BTTV_BOARD_OSPREY101_848] = {
1846 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1853 .tuner_type = UNSET,
1854 .tuner_addr = ADDR_UNSET,
1855 .radio_addr = ADDR_UNSET,
1860 [BTTV_BOARD_OSPREY1x1] = {
1861 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1868 .tuner_type = UNSET,
1869 .tuner_addr = ADDR_UNSET,
1870 .radio_addr = ADDR_UNSET,
1875 [BTTV_BOARD_OSPREY1x1_SVID] = {
1876 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1883 .tuner_type = UNSET,
1884 .tuner_addr = ADDR_UNSET,
1885 .radio_addr = ADDR_UNSET,
1890 [BTTV_BOARD_OSPREY2xx] = {
1891 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1898 .tuner_type = UNSET,
1899 .tuner_addr = ADDR_UNSET,
1900 .radio_addr = ADDR_UNSET,
1906 /* ---- card 0x58 ---------------------------------- */
1907 [BTTV_BOARD_OSPREY2x0_SVID] = {
1908 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1915 .tuner_type = UNSET,
1916 .tuner_addr = ADDR_UNSET,
1917 .radio_addr = ADDR_UNSET,
1922 [BTTV_BOARD_OSPREY2x0] = {
1923 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1930 .tuner_type = UNSET,
1931 .tuner_addr = ADDR_UNSET,
1932 .radio_addr = ADDR_UNSET,
1937 [BTTV_BOARD_OSPREY500] = {
1938 .name = "Osprey 500", /* 500 */
1945 .tuner_type = UNSET,
1946 .tuner_addr = ADDR_UNSET,
1947 .radio_addr = ADDR_UNSET,
1952 [BTTV_BOARD_OSPREY540] = {
1953 .name = "Osprey 540", /* 540 */
1958 .tuner_type = UNSET,
1959 .tuner_addr = ADDR_UNSET,
1960 .radio_addr = ADDR_UNSET,
1966 /* ---- card 0x5C ---------------------------------- */
1967 [BTTV_BOARD_OSPREY2000] = {
1968 .name = "Osprey 2000", /* 2000 */
1975 .tuner_type = UNSET,
1976 .tuner_addr = ADDR_UNSET,
1977 .radio_addr = ADDR_UNSET,
1980 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1982 [BTTV_BOARD_IDS_EAGLE] = {
1983 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1984 .name = "IDS Eagle",
1988 .tuner_type = UNSET,
1989 .tuner_addr = ADDR_UNSET,
1990 .radio_addr = ADDR_UNSET,
1993 .muxsel = { 0, 1, 2, 3 },
1994 .muxsel_hook = eagle_muxsel,
1999 [BTTV_BOARD_PINNACLESAT] = {
2000 .name = "Pinnacle PCTV Sat",
2005 .tuner_type = UNSET,
2006 .tuner_addr = ADDR_UNSET,
2007 .radio_addr = ADDR_UNSET,
2016 [BTTV_BOARD_FORMAC_PROTV] = {
2017 .name = "Formac ProTV II (bt878)",
2023 /* TV, Comp1, Composite over SVID con, SVID */
2024 .muxsel = { 2, 3, 1, 1 },
2025 .gpiomux = { 2, 2, 0, 0 },
2028 .tuner_type = TUNER_PHILIPS_PAL,
2029 .tuner_addr = ADDR_UNSET,
2030 .radio_addr = ADDR_UNSET,
2032 GPIO=0x00,0x01,0x03: mute (?)
2033 0x02: both TV and radio (tuner: FM1216/I)
2034 The card has onboard audio connectors labeled "cdrom" and "board",
2035 not soldered here, though unknown wiring.
2036 Card lacks: external audio in, pci subsystem id.
2040 /* ---- card 0x60 ---------------------------------- */
2041 [BTTV_BOARD_MACHTV] = {
2048 .muxsel = { 2, 3, 1, 1},
2049 .gpiomux = { 0, 1, 2, 3},
2052 .tuner_type = TUNER_PHILIPS_PAL,
2053 .tuner_addr = ADDR_UNSET,
2054 .radio_addr = ADDR_UNSET,
2057 [BTTV_BOARD_EURESYS_PICOLO] = {
2058 .name = "Euresys Picolo",
2067 .muxsel = { 2, 0, 1},
2069 .tuner_type = UNSET,
2070 .tuner_addr = ADDR_UNSET,
2071 .radio_addr = ADDR_UNSET,
2073 [BTTV_BOARD_PV150] = {
2074 /* Luc Van Hoeylandt <luc@e-magic.be> */
2075 .name = "ProVideo PV150", /* 0x4f */
2086 .tuner_type = UNSET,
2087 .tuner_addr = ADDR_UNSET,
2088 .radio_addr = ADDR_UNSET,
2090 [BTTV_BOARD_AD_TVK503] = {
2091 /* Hiroshi Takekawa <sian@big.or.jp> */
2092 /* This card lacks subsystem ID */
2093 .name = "AD-TVK503", /* 0x63 */
2098 .gpiomask = 0x001e8007,
2099 .muxsel = { 2, 3, 1, 0 },
2100 /* Tuner, Radio, external, internal, off, on */
2101 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
2106 .tuner_type = TUNER_PHILIPS_NTSC,
2107 .tuner_addr = ADDR_UNSET,
2108 .radio_addr = ADDR_UNSET,
2109 .audio_hook = adtvk503_audio,
2112 /* ---- card 0x64 ---------------------------------- */
2113 [BTTV_BOARD_HERCULES_SM_TV] = {
2114 .name = "Hercules Smart TV Stereo",
2120 .muxsel = { 2, 3, 1, 1 },
2124 .tuner_type = TUNER_PHILIPS_PAL,
2125 .tuner_addr = ADDR_UNSET,
2126 .radio_addr = ADDR_UNSET,
2128 - card lacks subsystem ID
2129 - stereo variant w/ daughter board with tda9874a @0xb0
2131 always from tda9874 independent of GPIO (?)
2132 external line in: unknown
2133 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2134 hef4053 (instead 4052) for unknown function
2137 [BTTV_BOARD_PACETV] = {
2138 .name = "Pace TV & Radio Card",
2143 .muxsel = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2147 .tuner_type = TUNER_PHILIPS_PAL_I,
2148 .tuner_addr = ADDR_UNSET,
2149 .radio_addr = ADDR_UNSET,
2152 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2153 only internal line out: (4pin header) RGGL
2154 Radio must be decoded by msp3410d (not routed through)*/
2156 .digital_mode = DIGITAL_MODE_CAMERA, todo!
2159 [BTTV_BOARD_IVC200] = {
2160 /* Chris Willing <chris@vislab.usyd.edu.au> */
2165 .tuner_type = UNSET,
2166 .tuner_addr = ADDR_UNSET,
2167 .radio_addr = ADDR_UNSET,
2173 [BTTV_BOARD_XGUARD] = {
2174 .name = "Grand X-Guard / Trust 814PCI",
2179 .tuner_type = TUNER_ABSENT,
2180 .tuner_addr = ADDR_UNSET,
2181 .radio_addr = ADDR_UNSET,
2183 .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2184 .muxsel_hook = xguard_muxsel,
2191 /* ---- card 0x68 ---------------------------------- */
2192 [BTTV_BOARD_NEBULA_DIGITV] = {
2193 .name = "Nebula Electronics DigiTV",
2197 .muxsel = { 2, 3, 1, 0 },
2202 .tuner_type = UNSET,
2203 .tuner_addr = ADDR_UNSET,
2204 .radio_addr = ADDR_UNSET,
2210 [BTTV_BOARD_PV143] = {
2211 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2212 .name = "ProVideo PV143",
2218 .muxsel = { 2, 3, 1, 0 },
2223 .tuner_type = UNSET,
2224 .tuner_addr = ADDR_UNSET,
2225 .radio_addr = ADDR_UNSET,
2227 [BTTV_BOARD_VD009X1_MINIDIN] = {
2228 /* M.Klahr@phytec.de */
2229 .name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2232 .tuner = UNSET, /* card has no tuner */
2235 .muxsel = { 2, 3, 1, 0 },
2236 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2239 .tuner_type = UNSET,
2240 .tuner_addr = ADDR_UNSET,
2241 .radio_addr = ADDR_UNSET,
2243 [BTTV_BOARD_VD009X1_COMBI] = {
2244 .name = "PHYTEC VD-009-X1 Combi (bt878)",
2247 .tuner = UNSET, /* card has no tuner */
2250 .muxsel = { 2, 3, 1, 1 },
2251 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2254 .tuner_type = UNSET,
2255 .tuner_addr = ADDR_UNSET,
2256 .radio_addr = ADDR_UNSET,
2259 /* ---- card 0x6c ---------------------------------- */
2260 [BTTV_BOARD_VD009_MINIDIN] = {
2261 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2264 .tuner = UNSET, /* card has no tuner */
2267 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2268 via the upper nibble of muxsel. here: used for
2269 xternal video-mux */
2270 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2271 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2274 .tuner_type = UNSET,
2275 .tuner_addr = ADDR_UNSET,
2276 .radio_addr = ADDR_UNSET,
2278 [BTTV_BOARD_VD009_COMBI] = {
2279 .name = "PHYTEC VD-009 Combi (bt878)",
2282 .tuner = UNSET, /* card has no tuner */
2285 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2286 via the upper nibble of muxsel. here: used for
2287 xternal video-mux */
2288 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2289 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2292 .tuner_type = UNSET,
2293 .tuner_addr = ADDR_UNSET,
2294 .radio_addr = ADDR_UNSET,
2296 [BTTV_BOARD_IVC100] = {
2301 .tuner_type = UNSET,
2302 .tuner_addr = ADDR_UNSET,
2303 .radio_addr = ADDR_UNSET,
2306 .muxsel = { 2, 3, 1, 0 },
2309 [BTTV_BOARD_IVC120] = {
2310 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2313 .audio_inputs = 0, /* card has no audio */
2314 .tuner = UNSET, /* card has no tuner */
2315 .tuner_type = UNSET,
2316 .tuner_addr = ADDR_UNSET,
2317 .radio_addr = ADDR_UNSET,
2318 .svhs = UNSET, /* card has no svhs */
2324 .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2325 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2326 .muxsel_hook = ivc120_muxsel,
2330 /* ---- card 0x70 ---------------------------------- */
2331 [BTTV_BOARD_PC_HDTV] = {
2332 .name = "pcHDTV HD-2000 TV",
2337 .muxsel = { 2, 3, 1, 0 },
2338 .tuner_type = TUNER_PHILIPS_ATSC,
2339 .tuner_addr = ADDR_UNSET,
2340 .radio_addr = ADDR_UNSET,
2343 [BTTV_BOARD_TWINHAN_DST] = {
2344 .name = "Twinhan DST + clones",
2348 .tuner_type = TUNER_ABSENT,
2349 .tuner_addr = ADDR_UNSET,
2350 .radio_addr = ADDR_UNSET,
2354 [BTTV_BOARD_WINFASTVC100] = {
2355 .name = "Winfast VC100",
2360 .muxsel = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2364 .tuner_type = TUNER_ABSENT,
2365 .tuner_addr = ADDR_UNSET,
2366 .radio_addr = ADDR_UNSET,
2369 [BTTV_BOARD_TEV560] = {
2370 .name = "Teppro TEV-560/InterVision IV-560",
2376 .muxsel = { 2, 3, 1, 1 },
2377 .gpiomux = { 1, 1, 1, 1 },
2379 .tuner_type = TUNER_PHILIPS_PAL,
2380 .tuner_addr = ADDR_UNSET,
2381 .radio_addr = ADDR_UNSET,
2385 /* ---- card 0x74 ---------------------------------- */
2386 [BTTV_BOARD_SIMUS_GVC1100] = {
2387 .name = "SIMUS GVC1100",
2392 .tuner_type = UNSET,
2393 .tuner_addr = ADDR_UNSET,
2394 .radio_addr = ADDR_UNSET,
2396 .muxsel = { 2, 2, 2, 2 },
2398 .muxsel_hook = gvc1100_muxsel,
2400 [BTTV_BOARD_NGSTV_PLUS] = {
2401 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2402 .name = "NGS NGSTV+",
2406 .gpiomask = 0x008007,
2407 .muxsel = { 2, 3, 0, 0 },
2408 .gpiomux = { 0, 0, 0, 0 },
2409 .gpiomute = 0x000003,
2411 .tuner_type = TUNER_PHILIPS_PAL,
2412 .tuner_addr = ADDR_UNSET,
2413 .radio_addr = ADDR_UNSET,
2416 [BTTV_BOARD_LMLBT4] = {
2417 /* http://linuxmedialabs.com */
2419 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2423 .muxsel = { 2, 3, 1, 0 },
2428 .tuner_type = UNSET,
2429 .tuner_addr = ADDR_UNSET,
2430 .radio_addr = ADDR_UNSET,
2432 [BTTV_BOARD_TEKRAM_M205] = {
2433 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2434 .name = "Tekram M205 PRO",
2438 .tuner_type = TUNER_PHILIPS_PAL,
2439 .tuner_addr = ADDR_UNSET,
2440 .radio_addr = ADDR_UNSET,
2444 .muxsel = { 2, 3, 1 },
2445 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2449 /* ---- card 0x78 ---------------------------------- */
2450 [BTTV_BOARD_CONTVFMI] = {
2451 /* Javier Cendan Ares <jcendan@lycos.es> */
2452 /* bt878 TV + FM without subsystem ID */
2453 .name = "Conceptronic CONTVFMi",
2458 .gpiomask = 0x008007,
2459 .muxsel = { 2, 3, 1, 1 },
2460 .gpiomux = { 0, 1, 2, 2 },
2464 .tuner_type = TUNER_PHILIPS_PAL,
2465 .tuner_addr = ADDR_UNSET,
2466 .radio_addr = ADDR_UNSET,
2470 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2471 /*Eric DEBIEF <debief@telemsa.com>*/
2472 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2473 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2475 .name = "Euresys Picolo Tetra",
2481 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2485 .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
2486 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2489 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2490 .tuner_type = UNSET,
2491 .tuner_addr = ADDR_UNSET,
2492 .radio_addr = ADDR_UNSET,
2494 [BTTV_BOARD_SPIRIT_TV] = {
2495 /* Spirit TV Tuner from http://spiritmodems.com.au */
2496 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2497 .name = "Spirit TV Tuner",
2502 .gpiomask = 0x0000000f,
2503 .muxsel = { 2, 1, 1 },
2504 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2505 .tuner_type = TUNER_TEMIC_PAL,
2506 .tuner_addr = ADDR_UNSET,
2507 .radio_addr = ADDR_UNSET,
2511 [BTTV_BOARD_AVDVBT_771] = {
2512 /* Wolfram Joost <wojo@frokaschwei.de> */
2513 .name = "AVerMedia AVerTV DVB-T 771",
2517 .tuner_type = TUNER_ABSENT,
2518 .tuner_addr = ADDR_UNSET,
2519 .radio_addr = ADDR_UNSET,
2520 .muxsel = { 3 , 3 },
2529 /* ---- card 0x7c ---------------------------------- */
2530 [BTTV_BOARD_AVDVBT_761] = {
2531 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2532 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2533 .name = "AverMedia AverTV DVB-T 761",
2537 .muxsel = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2542 .tuner_type = UNSET,
2543 .tuner_addr = ADDR_UNSET,
2544 .radio_addr = ADDR_UNSET,
2549 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2550 /* andre.schwarz@matrix-vision.de */
2551 .name = "MATRIX Vision Sigma-SQ",
2557 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
2558 3, 3, 3, 3, 3, 3, 3, 3 },
2559 .muxsel_hook = sigmaSQ_muxsel,
2563 .tuner_type = UNSET,
2564 .tuner_addr = ADDR_UNSET,
2565 .radio_addr = ADDR_UNSET,
2567 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2568 /* andre.schwarz@matrix-vision.de */
2569 .name = "MATRIX Vision Sigma-SLC",
2575 .muxsel = { 2, 2, 2, 2 },
2576 .muxsel_hook = sigmaSLC_muxsel,
2580 .tuner_type = UNSET,
2581 .tuner_addr = ADDR_UNSET,
2582 .radio_addr = ADDR_UNSET,
2584 /* BTTV_BOARD_APAC_VIEWCOMP */
2585 [BTTV_BOARD_APAC_VIEWCOMP] = {
2586 /* Attila Kondoros <attila.kondoros@chello.hu> */
2587 /* bt878 TV + FM 0x00000000 subsystem ID */
2588 .name = "APAC Viewcomp 878(AMAX)",
2594 .muxsel = { 2, 3, 1, 1 },
2595 .gpiomux = { 2, 0, 0, 0 },
2599 .tuner_type = TUNER_PHILIPS_PAL,
2600 .tuner_addr = ADDR_UNSET,
2601 .radio_addr = ADDR_UNSET,
2602 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2603 .has_radio = 1, /* not every card has radio */
2606 /* ---- card 0x80 ---------------------------------- */
2607 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2608 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2609 .name = "DViCO FusionHDTV DVB-T Lite",
2617 .tuner_type = UNSET,
2618 .tuner_addr = ADDR_UNSET,
2619 .radio_addr = ADDR_UNSET,
2621 [BTTV_BOARD_VGEAR_MYVCD] = {
2622 /* Steven <photon38@pchome.com.tw> */
2623 .name = "V-Gear MyVCD",
2629 .muxsel = {2, 3, 1, 0 },
2630 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2634 .tuner_type = TUNER_PHILIPS_NTSC_M,
2635 .tuner_addr = ADDR_UNSET,
2636 .radio_addr = ADDR_UNSET,
2639 [BTTV_BOARD_SUPER_TV] = {
2640 /* Rick C <cryptdragoon@gmail.com> */
2641 .name = "Super TV Tuner",
2646 .muxsel = { 2, 3, 1, 0 },
2647 .tuner_type = TUNER_PHILIPS_NTSC,
2648 .tuner_addr = ADDR_UNSET,
2649 .radio_addr = ADDR_UNSET,
2650 .gpiomask = 0x008007,
2651 .gpiomux = { 0, 0x000001,0,0 },
2655 [BTTV_BOARD_TIBET_CS16] = {
2656 /* Chris Fanning <video4linux@haydon.net> */
2657 .name = "Tibet Systems 'Progress DVR' CS16",
2662 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2667 .tuner_type = UNSET,
2668 .tuner_addr = ADDR_UNSET,
2669 .radio_addr = ADDR_UNSET,
2670 .muxsel_hook = tibetCS16_muxsel,
2672 [BTTV_BOARD_KODICOM_4400R] = {
2673 /* Bill Brack <wbrack@mmm.com.hk> */
2675 * Note that, because of the card's wiring, the "master"
2676 * BT878A chip (i.e. the one which controls the analog switch
2677 * and must use this card type) is the 2nd one detected. The
2678 * other 3 chips should use card type 0x85, whose description
2679 * follows this one. There is a EEPROM on the card (which is
2680 * connected to the I2C of one of those other chips), but is
2681 * not currently handled. There is also a facility for a
2682 * "monitor", which is also not currently implemented.
2684 .name = "Kodicom 4400R (master)",
2688 .tuner_type = UNSET,
2689 .tuner_addr = ADDR_UNSET,
2690 .radio_addr = ADDR_UNSET,
2692 /* GPIO bits 0-9 used for analog switch:
2693 * 00 - 03: camera selector
2694 * 04 - 06: channel (controller) selector
2695 * 07: data (1->on, 0->off)
2698 * bit 16 is input from sync separator for the channel
2700 .gpiomask = 0x0003ff,
2702 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2707 .muxsel_hook = kodicom4400r_muxsel,
2709 [BTTV_BOARD_KODICOM_4400R_SL] = {
2710 /* Bill Brack <wbrack@mmm.com.hk> */
2711 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2712 * one which controls the analog switch, and must use the card type)
2713 * is the 2nd one detected. The other 3 chips should use this card
2716 .name = "Kodicom 4400R (slave)",
2720 .tuner_type = UNSET,
2721 .tuner_addr = ADDR_UNSET,
2722 .radio_addr = ADDR_UNSET,
2724 .gpiomask = 0x010000,
2726 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2731 .muxsel_hook = kodicom4400r_muxsel,
2733 /* ---- card 0x86---------------------------------- */
2734 [BTTV_BOARD_ADLINK_RTV24] = {
2735 /* Michael Henson <mhenson@clarityvi.com> */
2736 /* Adlink RTV24 with special unlock codes */
2737 .name = "Adlink RTV24",
2742 .muxsel = { 2, 3, 1, 0 },
2743 .tuner_type = UNSET,
2744 .tuner_addr = ADDR_UNSET,
2745 .radio_addr = ADDR_UNSET,
2748 /* ---- card 0x87---------------------------------- */
2749 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2750 /* Michael Krufky <mkrufky@m1k.net> */
2751 .name = "DViCO FusionHDTV 5 Lite",
2753 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2754 .tuner_addr = ADDR_UNSET,
2755 .radio_addr = ADDR_UNSET,
2759 .muxsel = { 2, 3, 1 },
2760 .gpiomask = 0x00e00007,
2761 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2762 .gpiomute = 0x00c00007,
2768 /* ---- card 0x88---------------------------------- */
2769 [BTTV_BOARD_ACORP_Y878F] = {
2770 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2771 .name = "Acorp Y878F",
2776 .gpiomask = 0x01fe00,
2777 .muxsel = { 2, 3, 1, 1 },
2778 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2779 .gpiomute = 0x002000,
2782 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2783 .tuner_addr = 0xc1 >>1,
2784 .radio_addr = 0xc1 >>1,
2787 /* ---- card 0x89 ---------------------------------- */
2788 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2789 .name = "Conceptronic CTVFMi v2",
2794 .gpiomask = 0x001c0007,
2795 .muxsel = { 2, 3, 1, 1 },
2796 .gpiomux = { 0, 1, 2, 2 },
2800 .tuner_type = TUNER_TENA_9533_DI,
2801 .tuner_addr = ADDR_UNSET,
2802 .radio_addr = ADDR_UNSET,
2806 /* ---- card 0x8a ---------------------------------- */
2807 [BTTV_BOARD_PV_BT878P_2E] = {
2808 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2813 .gpiomask = 0x01fe00,
2814 .muxsel = { 2,3,1,1,-1 },
2815 .digital_mode = DIGITAL_MODE_CAMERA,
2816 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2817 .gpiomute = 0x12400,
2820 .tuner_type = TUNER_LG_PAL_FM,
2821 .tuner_addr = ADDR_UNSET,
2822 .radio_addr = ADDR_UNSET,
2825 /* ---- card 0x8b ---------------------------------- */
2826 [BTTV_BOARD_PV_M4900] = {
2827 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2828 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2834 .muxsel = { 2, 3, 1, 1 },
2835 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2839 .tuner_type = TUNER_YMEC_TVF_5533MF,
2840 .tuner_addr = ADDR_UNSET,
2841 .radio_addr = ADDR_UNSET,
2845 /* ---- card 0x8c ---------------------------------- */
2846 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2847 one external BNC composite input (mux 2)
2848 three internal composite inputs (unknown muxes)
2849 an 18-bit stereo A/D (CS5331A), which has:
2850 one external stereo unblanced (RCA) audio connection
2851 one (or 3?) internal stereo balanced (XLR) audio connection
2852 input is selected via gpio to a 14052B mux
2853 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2854 gain is controlled via an X9221A chip on the I2C bus @0x28
2855 sample rate is controlled via gpio to an MK1413S
2856 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2857 There is neither a tuner nor an svideo input. */
2858 [BTTV_BOARD_OSPREY440] = {
2859 .name = "Osprey 440",
2861 .audio_inputs = 2, /* this is meaningless */
2864 .muxsel = { 2, 3, 0, 1 }, /* 3,0,1 are guesses */
2866 .gpiomute = 0x000, /* int + 32kHz */
2867 .gpiomux = { 0, 0, 0x000, 0x100},
2869 .tuner_type = UNSET,
2870 .tuner_addr = ADDR_UNSET,
2871 .radio_addr = ADDR_UNSET,
2876 /* ---- card 0x8d ---------------------------------- */
2877 [BTTV_BOARD_ASOUND_SKYEYE] = {
2878 .name = "Asound Skyeye PCTV",
2884 .muxsel = { 2, 3, 1, 1 },
2885 .gpiomux = { 2, 0, 0, 0 },
2889 .tuner_type = TUNER_PHILIPS_NTSC,
2890 .tuner_addr = ADDR_UNSET,
2891 .radio_addr = ADDR_UNSET,
2893 /* ---- card 0x8e ---------------------------------- */
2894 [BTTV_BOARD_SABRENT_TVFM] = {
2895 .name = "Sabrent TV-FM (bttv version)",
2900 .gpiomask = 0x108007,
2901 .muxsel = { 2, 3, 1, 1 },
2902 .gpiomux = { 100000, 100002, 100002, 100000 },
2907 .tuner_type = TUNER_TNF_5335MF,
2908 .tuner_addr = ADDR_UNSET,
2911 /* ---- card 0x8f ---------------------------------- */
2912 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2913 .name = "Hauppauge ImpactVCB (bt878)",
2918 .gpiomask = 0x0f, /* old: 7 */
2919 .muxsel = { 0, 1, 3, 2 }, /* Composite 0-3 */
2923 .tuner_type = UNSET,
2924 .tuner_addr = ADDR_UNSET,
2925 .radio_addr = ADDR_UNSET,
2927 [BTTV_BOARD_MACHTV_MAGICTV] = {
2928 /* Julian Calaby <julian.calaby@gmail.com>
2929 * Slightly different from original MachTV definition (0x60)
2931 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2932 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2933 * properly (methinks) causing no keyup bits being set */
2935 .name = "MagicTV", /* rebranded MachTV */
2941 .muxsel = { 2, 3, 1, 1 },
2942 .gpiomux = { 0, 1, 2, 3 },
2944 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2945 .tuner_addr = ADDR_UNSET,
2946 .radio_addr = ADDR_UNSET,
2951 [BTTV_BOARD_SSAI_SECURITY] = {
2952 .name = "SSAI Security Video Interface",
2957 .muxsel = { 0, 1, 2, 3 },
2958 .tuner_type = UNSET,
2959 .tuner_addr = ADDR_UNSET,
2960 .radio_addr = ADDR_UNSET,
2962 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2963 .name = "SSAI Ultrasound Video Interface",
2968 .muxsel = { 2, 0, 1, 3 },
2969 .tuner_type = UNSET,
2970 .tuner_addr = ADDR_UNSET,
2971 .radio_addr = ADDR_UNSET,
2973 /* ---- card 0x94---------------------------------- */
2974 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2975 .name = "DViCO FusionHDTV 2",
2977 .tuner_type = TUNER_PHILIPS_ATSC, /* FCV1236D */
2978 .tuner_addr = ADDR_UNSET,
2979 .radio_addr = ADDR_UNSET,
2983 .muxsel = { 2, 3, 1 },
2984 .gpiomask = 0x00e00007,
2985 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2986 .gpiomute = 0x00c00007,
2991 /* ---- card 0x95---------------------------------- */
2992 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2993 .name = "Typhoon TV-Tuner PCI (50684)",
2998 .gpiomask = 0x3014f,
2999 .muxsel = { 2, 3, 1, 1 },
3000 .gpiomux = { 0x20001,0x10001, 0, 0 },
3004 .tuner_type = TUNER_PHILIPS_PAL_I,
3005 .tuner_addr = ADDR_UNSET,
3006 .radio_addr = ADDR_UNSET,
3010 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
3012 /* ----------------------------------------------------------------------- */
3014 static unsigned char eeprom_data[256];
3019 void __devinit bttv_idcard(struct bttv *btv)
3021 unsigned int gpiobits;
3025 /* read PCI subsystem ID */
3026 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
3027 btv->cardid = tmp << 16;
3028 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
3031 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
3032 /* look for the card */
3033 for (type = -1, i = 0; cards[i].id != 0; i++)
3034 if (cards[i].id == btv->cardid)
3039 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
3040 "PCI subsystem ID is %04x:%04x\n",
3041 btv->c.nr,cards[type].name,cards[type].cardnr,
3042 btv->cardid & 0xffff,
3043 (btv->cardid >> 16) & 0xffff);
3044 btv->c.type = cards[type].cardnr;
3047 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
3048 btv->c.nr, btv->cardid & 0xffff,
3049 (btv->cardid >> 16) & 0xffff);
3050 printk(KERN_DEBUG "please mail id, board name and "
3051 "the correct card= insmod option to video4linux-list@redhat.com\n");
3055 /* let the user override the autodetected type */
3056 if (card[btv->c.nr] < bttv_num_tvcards)
3057 btv->c.type=card[btv->c.nr];
3059 /* print which card config we are using */
3060 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
3061 bttv_tvcards[btv->c.type].name, btv->c.type,
3062 card[btv->c.nr] < bttv_num_tvcards
3063 ? "insmod option" : "autodetected");
3065 /* overwrite gpio stuff ?? */
3066 if (UNSET == audioall && UNSET == audiomux[0])
3069 if (UNSET != audiomux[0]) {
3071 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3072 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
3073 gpiobits |= audiomux[i];
3076 gpiobits = audioall;
3077 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3078 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
3081 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
3082 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
3083 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
3084 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3085 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
3091 * (most) board specific initialisations goes here
3094 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3095 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3099 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3100 type = BTTV_BOARD_MODTEC_205;
3101 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3102 type = BTTV_BOARD_EURESYS_PICOLO;
3103 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3104 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3108 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3109 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3113 static void flyvideo_gpio(struct bttv *btv)
3115 int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
3116 int tuner=UNSET,ttype;
3118 gpio_inout(0xffffff, 0);
3119 udelay(8); /* without this we would see the 0x1800 mask */
3121 /* FIXME: must restore OUR_EN ??? */
3123 /* all cards provide GPIO info, some have an additional eeprom
3124 * LR50: GPIO coding can be found lower right CP1 .. CP9
3125 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3127 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3129 * lowest 3 bytes are remote control codes (no handshake needed)
3130 * xxxFFF: No remote control chip soldered
3131 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3132 * Note: Some bits are Audio_Mask !
3134 ttype=(gpio&0x0f0000)>>16;
3136 case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
3138 case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
3140 case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3142 case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
3144 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3147 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3150 has_remote = gpio & 0x800000;
3151 has_radio = gpio & 0x400000;
3152 /* unknown 0x200000;
3153 * unknown2 0x100000; */
3154 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3155 has_tda9820_tda9821 = !(gpio & 0x004000);
3156 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3158 * gpio & 0x001000 output bit for audio routing */
3161 tuner = TUNER_ABSENT; /* No tuner present */
3163 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3164 btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
3165 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3166 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
3167 is_capture_only?"yes":"no ");
3169 if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3170 btv->tuner_type = tuner;
3171 btv->has_radio = has_radio;
3173 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3174 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3175 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3176 if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
3177 /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
3180 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3181 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3182 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3183 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3185 static void miro_pinnacle_gpio(struct bttv *btv)
3190 gpio_inout(0xffffff, 0);
3192 id = ((gpio>>10) & 63) -1;
3193 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3195 btv->tuner_type = miro_tunermap[id];
3196 if (0 == (gpio & 0x20)) {
3198 if (!miro_fmtuner[id]) {
3199 btv->has_matchbox = 1;
3200 btv->mbox_we = (1<<6);
3201 btv->mbox_most = (1<<7);
3202 btv->mbox_clk = (1<<8);
3203 btv->mbox_data = (1<<9);
3204 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3210 if (btv->c.type == BTTV_BOARD_MIRO)
3211 btv->c.type = BTTV_BOARD_MIROPRO;
3212 if (btv->c.type == BTTV_BOARD_PINNACLE)
3213 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3216 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3217 btv->c.nr, id+1, btv->tuner_type,
3218 !btv->has_radio ? "no" :
3219 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3220 (-1 == msp) ? "no" : "yes");
3222 /* new cards with microtune tuner */
3227 info = "PAL / mono";
3228 btv->tda9887_conf = TDA9887_INTERCARRIER;
3231 info = "PAL+SECAM / stereo";
3233 btv->tda9887_conf = TDA9887_QSS;
3236 info = "NTSC / stereo";
3238 btv->tda9887_conf = TDA9887_QSS;
3241 info = "PAL+SECAM / mono";
3242 btv->tda9887_conf = TDA9887_QSS;
3245 info = "NTSC / mono";
3246 btv->tda9887_conf = TDA9887_INTERCARRIER;
3249 info = "NTSC / stereo";
3250 btv->tda9887_conf = TDA9887_INTERCARRIER;
3253 info = "PAL / stereo";
3254 btv->tda9887_conf = TDA9887_INTERCARRIER;
3257 info = "oops: unknown card";
3261 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3263 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3264 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3265 btv->tuner_type = TUNER_MT2032;
3269 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3270 #define LM1882_SYNC_DRIVE 0x200000L
3272 static void init_ids_eagle(struct bttv *btv)
3274 gpio_inout(0xffffff,0xFFFF37);
3275 gpio_write(0x200020);
3277 /* flash strobe inverter ?! */
3278 gpio_write(0x200024);
3280 /* switch sync drive off */
3281 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3283 /* set BT848 muxel to 2 */
3284 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3287 /* Muxsel helper for the IDS Eagle.
3288 * the eagles does not use the standard muxsel-bits but
3289 * has its own multiplexer */
3290 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3292 btaor((2)<<5, ~(3<<5), BT848_IFORM);
3293 gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3296 /* set chroma ADC to sleep */
3297 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3298 /* set to composite video */
3299 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3300 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3302 /* switch sync drive off */
3303 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3306 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3308 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3309 gpio_write(masks[input%4]);
3312 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3315 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3316 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3318 IN - sensor inputs, INx - sensor inputs and TI XORed together
3319 O1,O2,O3 - alarm outputs (relays)
3321 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3325 static void init_lmlbt4x(struct bttv *btv)
3327 printk(KERN_DEBUG "LMLBT4x init\n");
3328 btwrite(0x000000, BT848_GPIO_REG_INP);
3329 gpio_inout(0xffffff, 0x0006C0);
3330 gpio_write(0x000000);
3333 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3335 unsigned int inmux = input % 8;
3336 gpio_inout( 0xf, 0xf );
3337 gpio_bits( 0xf, inmux );
3340 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3342 unsigned int inmux = input % 4;
3343 gpio_inout( 3<<9, 3<<9 );
3344 gpio_bits( 3<<9, inmux<<9 );
3347 /* ----------------------------------------------------------------------- */
3349 static void bttv_reset_audio(struct bttv *btv)
3352 * BT878A has a audio-reset register.
3353 * 1. This register is an audio reset function but it is in
3354 * function-0 (video capture) address space.
3355 * 2. It is enough to do this once per power-up of the card.
3356 * 3. There is a typo in the Conexant doc -- it is not at
3357 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3358 * --//Shrikumar 030609
3364 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3365 btwrite((1<<7), 0x058);
3370 /* initialization part one -- before registering i2c bus */
3371 void __devinit bttv_init_card1(struct bttv *btv)
3373 switch (btv->c.type) {
3374 case BTTV_BOARD_HAUPPAUGE:
3375 case BTTV_BOARD_HAUPPAUGE878:
3376 boot_msp34xx(btv,5);
3378 case BTTV_BOARD_VOODOOTV_200:
3379 case BTTV_BOARD_VOODOOTV_FM:
3380 boot_msp34xx(btv,20);
3382 case BTTV_BOARD_AVERMEDIA98:
3383 boot_msp34xx(btv,11);
3385 case BTTV_BOARD_HAUPPAUGEPVR:
3388 case BTTV_BOARD_TWINHAN_DST:
3389 case BTTV_BOARD_AVDVBT_771:
3390 case BTTV_BOARD_PINNACLESAT:
3391 btv->use_i2c_hw = 1;
3393 case BTTV_BOARD_ADLINK_RTV24:
3398 if (!bttv_tvcards[btv->c.type].has_dvb)
3399 bttv_reset_audio(btv);
3402 /* initialization part two -- after registering i2c bus */
3403 void __devinit bttv_init_card2(struct bttv *btv)
3405 int addr=ADDR_UNSET;
3407 btv->tuner_type = UNSET;
3409 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3410 bttv_readee(btv,eeprom_data,0xa0);
3411 identify_by_eeprom(btv,eeprom_data);
3414 switch (btv->c.type) {
3415 case BTTV_BOARD_MIRO:
3416 case BTTV_BOARD_MIROPRO:
3417 case BTTV_BOARD_PINNACLE:
3418 case BTTV_BOARD_PINNACLEPRO:
3420 miro_pinnacle_gpio(btv);
3422 case BTTV_BOARD_FLYVIDEO_98:
3423 case BTTV_BOARD_MAXI:
3424 case BTTV_BOARD_LIFE_FLYKIT:
3425 case BTTV_BOARD_FLYVIDEO:
3426 case BTTV_BOARD_TYPHOON_TVIEW:
3427 case BTTV_BOARD_CHRONOS_VS2:
3428 case BTTV_BOARD_FLYVIDEO_98FM:
3429 case BTTV_BOARD_FLYVIDEO2000:
3430 case BTTV_BOARD_FLYVIDEO98EZ:
3431 case BTTV_BOARD_CONFERENCETV:
3432 case BTTV_BOARD_LIFETEC_9415:
3435 case BTTV_BOARD_HAUPPAUGE:
3436 case BTTV_BOARD_HAUPPAUGE878:
3437 case BTTV_BOARD_HAUPPAUGEPVR:
3438 /* pick up some config infos from the eeprom */
3439 bttv_readee(btv,eeprom_data,0xa0);
3440 hauppauge_eeprom(btv);
3442 case BTTV_BOARD_AVERMEDIA98:
3443 case BTTV_BOARD_AVPHONE98:
3444 bttv_readee(btv,eeprom_data,0xa0);
3445 avermedia_eeprom(btv);
3447 case BTTV_BOARD_PXC200:
3450 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3451 picolo_tetra_init(btv);
3453 case BTTV_BOARD_VHX:
3455 btv->has_matchbox = 1;
3456 btv->mbox_we = 0x20;
3458 btv->mbox_clk = 0x08;
3459 btv->mbox_data = 0x10;
3460 btv->mbox_mask = 0x38;
3462 case BTTV_BOARD_VOBIS_BOOSTAR:
3463 case BTTV_BOARD_TERRATV:
3464 terratec_active_radio_upgrade(btv);
3466 case BTTV_BOARD_MAGICTVIEW061:
3467 if (btv->cardid == 0x3002144f) {
3469 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3472 case BTTV_BOARD_STB2:
3473 if (btv->cardid == 0x3060121a) {
3474 /* Fix up entry for 3DFX VoodooTV 100,
3475 which is an OEM STB card variant. */
3477 btv->tuner_type=TUNER_TEMIC_NTSC;
3480 case BTTV_BOARD_OSPREY1x0:
3481 case BTTV_BOARD_OSPREY1x0_848:
3482 case BTTV_BOARD_OSPREY101_848:
3483 case BTTV_BOARD_OSPREY1x1:
3484 case BTTV_BOARD_OSPREY1x1_SVID:
3485 case BTTV_BOARD_OSPREY2xx:
3486 case BTTV_BOARD_OSPREY2x0_SVID:
3487 case BTTV_BOARD_OSPREY2x0:
3488 case BTTV_BOARD_OSPREY440:
3489 case BTTV_BOARD_OSPREY500:
3490 case BTTV_BOARD_OSPREY540:
3491 case BTTV_BOARD_OSPREY2000:
3492 bttv_readee(btv,eeprom_data,0xa0);
3493 osprey_eeprom(btv, eeprom_data);
3495 case BTTV_BOARD_IDS_EAGLE:
3496 init_ids_eagle(btv);
3498 case BTTV_BOARD_MODTEC_205:
3499 bttv_readee(btv,eeprom_data,0xa0);
3502 case BTTV_BOARD_LMLBT4:
3505 case BTTV_BOARD_TIBET_CS16:
3506 tibetCS16_init(btv);
3508 case BTTV_BOARD_KODICOM_4400R:
3509 kodicom4400r_init(btv);
3513 /* pll configuration */
3514 if (!(btv->id==848 && btv->revision==0x11)) {
3515 /* defaults from card list */
3516 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3517 btv->pll.pll_ifreq=28636363;
3518 btv->pll.pll_crystal=BT848_IFORM_XT0;
3520 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3521 btv->pll.pll_ifreq=35468950;
3522 btv->pll.pll_crystal=BT848_IFORM_XT1;
3524 /* insmod options can override */
3525 switch (pll[btv->c.nr]) {
3527 btv->pll.pll_crystal = 0;
3528 btv->pll.pll_ifreq = 0;
3529 btv->pll.pll_ofreq = 0;
3531 case 1: /* 28 MHz */
3533 btv->pll.pll_ifreq = 28636363;
3534 btv->pll.pll_ofreq = 0;
3535 btv->pll.pll_crystal = BT848_IFORM_XT0;
3537 case 2: /* 35 MHz */
3539 btv->pll.pll_ifreq = 35468950;
3540 btv->pll.pll_ofreq = 0;
3541 btv->pll.pll_crystal = BT848_IFORM_XT1;
3545 btv->pll.pll_current = -1;
3547 /* tuner configuration (from card list / autodetect / insmod option) */
3548 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3549 addr = bttv_tvcards[btv->c.type].tuner_addr;
3551 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3552 if(UNSET == btv->tuner_type)
3553 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3554 if (UNSET != tuner[btv->c.nr])
3555 btv->tuner_type = tuner[btv->c.nr];
3557 if (btv->tuner_type == TUNER_ABSENT ||
3558 bttv_tvcards[btv->c.type].tuner == UNSET)
3559 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3560 else if(btv->tuner_type == UNSET)
3561 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3563 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3566 if (btv->tuner_type != UNSET) {
3567 struct tuner_setup tun_setup;
3569 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3570 tun_setup.type = btv->tuner_type;
3571 tun_setup.addr = addr;
3573 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3576 if (btv->tda9887_conf) {
3577 bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG,
3578 &btv->tda9887_conf);
3581 btv->svhs = bttv_tvcards[btv->c.type].svhs;
3582 if (svhs[btv->c.nr] != UNSET)
3583 btv->svhs = svhs[btv->c.nr];
3584 if (remote[btv->c.nr] != UNSET)
3585 btv->has_remote = remote[btv->c.nr];
3587 if (bttv_tvcards[btv->c.type].has_radio)
3589 if (bttv_tvcards[btv->c.type].has_remote)
3591 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3593 if (bttv_tvcards[btv->c.type].audio_hook)
3594 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
3596 if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3597 /* detect Bt832 chip for quartzsight digital camera */
3598 if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
3599 (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
3606 if (bttv_tvcards[btv->c.type].tuner == UNSET)
3607 return; /* no tuner or related drivers to load */
3609 /* try to detect audio/fader chips */
3610 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3611 bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3612 request_module("msp3400");
3614 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3615 bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3616 request_module("msp3400");
3618 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3619 bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3620 request_module("tda9875");
3622 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3623 bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3624 request_module("tda7432");
3626 if (bttv_tvcards[btv->c.type].needs_tvaudio)
3627 request_module("tvaudio");
3629 if (btv->tuner_type != UNSET && btv->tuner_type != TUNER_ABSENT)
3630 request_module("tuner");
3634 /* ----------------------------------------------------------------------- */
3636 static void modtec_eeprom(struct bttv *btv)
3638 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3639 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3640 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3641 btv->c.nr,&eeprom_data[0x1e]);
3642 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3643 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3644 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3645 btv->c.nr,&eeprom_data[0x1e]);
3646 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3647 btv->tuner_type=TUNER_PHILIPS_NTSC;
3648 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3649 btv->c.nr,&eeprom_data[0x1e]);
3651 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3652 btv->c.nr,&eeprom_data[0x1e]);
3656 static void __devinit hauppauge_eeprom(struct bttv *btv)
3660 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3661 btv->tuner_type = tv.tuner_type;
3662 btv->has_radio = tv.has_radio;
3664 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3665 btv->c.nr, tv.model);
3668 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3669 * type based on model #.
3671 if(tv.model == 64900) {
3672 printk("bttv%d: Switching board type from %s to %s\n",
3674 bttv_tvcards[btv->c.type].name,
3675 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3676 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3680 static int terratec_active_radio_upgrade(struct bttv *btv)
3685 btv->has_matchbox = 1;
3686 btv->mbox_we = 0x10;
3687 btv->mbox_most = 0x20;
3688 btv->mbox_clk = 0x08;
3689 btv->mbox_data = 0x04;
3690 btv->mbox_mask = 0x3c;
3692 btv->mbox_iow = 1 << 8;
3693 btv->mbox_ior = 1 << 9;
3694 btv->mbox_csel = 1 << 10;
3697 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3698 if (0x1ed8 == tea5757_read(btv)) {
3699 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3702 btv->has_matchbox = 1;
3705 btv->has_matchbox = 0;
3711 /* ----------------------------------------------------------------------- */
3714 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3716 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3717 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3718 * unpacked with unzip).
3720 #define PVR_GPIO_DELAY 10
3722 #define BTTV_ALT_DATA 0x000001
3723 #define BTTV_ALT_DCLK 0x100000
3724 #define BTTV_ALT_NCONFIG 0x800000
3726 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3732 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3734 udelay(PVR_GPIO_DELAY);
3736 gpio_write(BTTV_ALT_NCONFIG);
3737 udelay(PVR_GPIO_DELAY);
3739 for (n = 0; n < microlen; n++) {
3741 for (i = 0 ; i < 8 ; i++) {
3742 gpio_bits(BTTV_ALT_DCLK,0);
3744 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3746 gpio_bits(BTTV_ALT_DATA,0);
3747 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3751 gpio_bits(BTTV_ALT_DCLK,0);
3752 udelay(PVR_GPIO_DELAY);
3754 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3755 for (i = 0 ; i < 30 ; i++) {
3756 gpio_bits(BTTV_ALT_DCLK,0);
3757 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3759 gpio_bits(BTTV_ALT_DCLK,0);
3763 static int __devinit pvr_boot(struct bttv *btv)
3765 const struct firmware *fw_entry;
3768 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3770 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3774 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3775 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3776 btv->c.nr, (rc < 0) ? "failed" : "ok");
3777 release_firmware(fw_entry);
3781 /* ----------------------------------------------------------------------- */
3782 /* some osprey specific stuff */
3784 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3790 /* This code will nevery actually get called in this case.... */
3791 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3792 /* this might be an antique... check for MMAC label in eeprom */
3793 if (!strncmp(ee, "MMAC", 4)) {
3795 for (i = 0; i < 21; i++)
3797 if (checksum != ee[21])
3799 cardid = BTTV_BOARD_OSPREY1x0_848;
3800 for (i = 12; i < 21; i++)
3801 serial *= 10, serial += ee[i] - '0';
3804 unsigned short type;
3806 for (i = 4*16; i < 8*16; i += 16) {
3807 u16 checksum = ip_compute_csum(ee + i, 16);
3809 if ((checksum&0xff) + (checksum>>8) == 0xff)
3816 /* found a valid descriptor */
3817 type = be16_to_cpup((u16*)(ee+4));
3822 cardid = BTTV_BOARD_OSPREY1x0_848;
3825 cardid = BTTV_BOARD_OSPREY101_848;
3831 cardid = BTTV_BOARD_OSPREY1x0;
3835 cardid = BTTV_BOARD_OSPREY1x1;
3840 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3846 cardid = BTTV_BOARD_OSPREY2xx;
3850 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3853 cardid = BTTV_BOARD_OSPREY500;
3857 cardid = BTTV_BOARD_OSPREY540;
3858 /* bttv_osprey_540_init(btv); */
3863 cardid = BTTV_BOARD_OSPREY2x0;
3864 /* enable output on select control lines */
3865 gpio_inout(0xffffff,0x000303);
3868 cardid = BTTV_BOARD_OSPREY440;
3871 /* unknown...leave generic, but get serial # */
3872 printk(KERN_INFO "bttv%d: "
3873 "osprey eeprom: unknown card type 0x%04x\n",
3877 serial = be32_to_cpup((u32*)(ee+6));
3880 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3882 cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3884 if (cardid<0 || btv->c.type == cardid)
3887 /* card type isn't set correctly */
3888 if (card[btv->c.nr] < bttv_num_tvcards) {
3889 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3890 "Not overriding user specified card type\n", btv->c.nr);
3892 printk(KERN_INFO "bttv%d: osprey eeprom: "
3893 "Changing card type from %d to %d\n", btv->c.nr,
3894 btv->c.type, cardid);
3895 btv->c.type = cardid;
3899 /* ----------------------------------------------------------------------- */
3900 /* AVermedia specific stuff, from bktr_card.c */
3902 static int tuner_0_table[] = {
3903 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3904 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3905 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3906 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3907 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3908 TUNER_PHILIPS_FM1216ME_MK3 };
3910 static int tuner_1_table[] = {
3911 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3912 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3913 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3914 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3915 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3917 static void __devinit avermedia_eeprom(struct bttv *btv)
3919 int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3921 tuner_make = (eeprom_data[0x41] & 0x7);
3922 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3923 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3924 btv->has_remote = (eeprom_data[0x42] & 0x01);
3926 if (tuner_make == 0 || tuner_make == 2)
3927 if(tuner_format <=0x0a)
3928 tuner = tuner_0_table[tuner_format];
3929 if (tuner_make == 1)
3930 if(tuner_format <=9)
3931 tuner = tuner_1_table[tuner_format];
3933 if (tuner_make == 4)
3934 if(tuner_format == 0x09)
3935 tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3937 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3938 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3940 btv->tuner_type=tuner;
3943 printk("Unknown type");
3944 printk(" radio:%s remote control:%s\n",
3945 tuner_tv_fm ? "yes" : "no",
3946 btv->has_remote ? "yes" : "no");
3949 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3950 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3952 /* fix up our card entry */
3953 if(norm==VIDEO_MODE_NTSC) {
3954 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3955 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
3956 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3957 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x957fff;
3958 dprintk("bttv_tda9880_setnorm to NTSC\n");
3961 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3962 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
3963 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3964 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x947fff;
3965 dprintk("bttv_tda9880_setnorm to PAL\n");
3967 /* set GPIO according */
3968 gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3969 bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
3974 * reset/enable the MSP on some Hauppauge cards
3975 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3980 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3982 int mask = (1 << pin);
3984 gpio_inout(mask,mask);
3987 gpio_bits(mask,mask);
3990 bttv_gpio_tracking(btv,"msp34xx");
3992 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3993 "init [%d]\n", btv->c.nr, pin);
3996 static void __devinit boot_bt832(struct bttv *btv)
4000 /* ----------------------------------------------------------------------- */
4001 /* Imagenation L-Model PXC200 Framegrabber */
4002 /* This is basically the same procedure as
4003 * used by Alessandro Rubini in his pxc200
4004 * driver, but using BTTV functions */
4006 static void __devinit init_PXC200(struct bttv *btv)
4008 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4009 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4015 /* Initialise GPIO-connevted stuff */
4016 gpio_inout(0xffffff, (1<<13));
4020 /* GPIO inputs are pulled up, so no need to drive
4021 * reset pin any longer */
4022 gpio_bits(0xffffff, 0);
4024 bttv_gpio_tracking(btv,"pxc200");
4026 /* we could/should try and reset/control the AD pots? but
4027 right now we simply turned off the crushing. Without
4028 this the AGC drifts drifts
4029 remember the EN is reverse logic -->
4030 setting BT848_ADC_AGC_EN disable the AGC
4031 tboult@eecs.lehigh.edu
4034 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4036 /* Initialise MAX517 DAC */
4037 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
4038 bttv_I2CWrite(btv,0x5E,0,0x80,1);
4040 /* Initialise 12C508 PIC */
4041 /* The I2CWrite and I2CRead commmands are actually to the
4042 * same chips - but the R/W bit is included in the address
4043 * argument so the numbers are different */
4046 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
4048 /* First of all, enable the clock line. This is used in the PXC200-F */
4049 val = btread(BT848_GPIO_DMA_CTL);
4050 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4051 btwrite(val, BT848_GPIO_DMA_CTL);
4053 /* Then, push to 0 the reset pin long enough to reset the *
4054 * device same as above for the reset line, but not the same
4055 * value sent to the GPIO-connected stuff
4056 * which one is the good one? */
4057 gpio_inout(0xffffff,(1<<2));
4062 for (i = 0; i < ARRAY_SIZE(vals); i++) {
4063 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4066 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4067 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4071 printk(KERN_INFO "PXC200 Initialised.\n");
4076 /* ----------------------------------------------------------------------- */
4078 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4079 * it. This apparently involves the following procedure for each 878 chip:
4081 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4083 * 2) write to GPIO_DATA
4089 * read from GPIO_DATA into buf (uint_32)
4090 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4091 * error. ERROR_CPLD_Check_Failed stop.
4093 * 3) write to GPIO_DATA
4094 * - write 0x4400 + 0x0E
4096 * - write 0x4410 + 0x0E
4099 * read from GPIO_DATA into buf (uint_32)
4100 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4101 * error. ERROR_CPLD_Check_Failed.
4103 /* ----------------------------------------------------------------------- */
4105 init_RTV24 (struct bttv *btv)
4107 uint32_t dataRead = 0;
4108 long watchdog_value = 0x0E;
4111 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4114 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4116 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4118 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4120 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4122 dataRead = btread (BT848_GPIO_DATA);
4124 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4126 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4127 btv->c.nr, dataRead);
4130 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4132 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4134 btwrite (watchdog_value, BT848_GPIO_DATA);
4136 dataRead = btread (BT848_GPIO_DATA);
4138 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4140 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4141 btv->c.nr, dataRead);
4147 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4152 /* ----------------------------------------------------------------------- */
4153 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4155 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4156 * This code is placed under the terms of the GNU General Public License
4158 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4161 static void bus_low(struct bttv *btv, int bit)
4163 if (btv->mbox_ior) {
4164 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4165 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4172 if (btv->mbox_ior) {
4173 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4178 static void bus_high(struct bttv *btv, int bit)
4180 if (btv->mbox_ior) {
4181 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4182 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4189 if (btv->mbox_ior) {
4190 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4195 static int bus_in(struct bttv *btv, int bit)
4197 if (btv->mbox_ior) {
4198 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4199 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4202 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4205 return gpio_read() & (bit);
4208 /* TEA5757 register bits */
4209 #define TEA_FREQ 0:14
4210 #define TEA_BUFFER 15:15
4212 #define TEA_SIGNAL_STRENGTH 16:17
4214 #define TEA_PORT1 18:18
4215 #define TEA_PORT0 19:19
4217 #define TEA_BAND 20:21
4218 #define TEA_BAND_FM 0
4219 #define TEA_BAND_MW 1
4220 #define TEA_BAND_LW 2
4221 #define TEA_BAND_SW 3
4223 #define TEA_MONO 22:22
4224 #define TEA_ALLOW_STEREO 0
4225 #define TEA_FORCE_MONO 1
4227 #define TEA_SEARCH_DIRECTION 23:23
4228 #define TEA_SEARCH_DOWN 0
4229 #define TEA_SEARCH_UP 1
4231 #define TEA_STATUS 24:24
4232 #define TEA_STATUS_TUNED 0
4233 #define TEA_STATUS_SEARCHING 1
4235 /* Low-level stuff */
4236 static int tea5757_read(struct bttv *btv)
4238 unsigned long timeout;
4242 /* better safe than sorry */
4243 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4245 if (btv->mbox_ior) {
4246 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4247 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4252 bttv_gpio_tracking(btv,"tea5757 read");
4254 bus_low(btv,btv->mbox_we);
4255 bus_low(btv,btv->mbox_clk);
4258 timeout= jiffies + msecs_to_jiffies(1000);
4260 /* wait for DATA line to go low; error if it doesn't */
4261 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4263 if (bus_in(btv,btv->mbox_data)) {
4264 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4268 dprintk("bttv%d: tea5757:",btv->c.nr);
4269 for (i = 0; i < 24; i++) {
4271 bus_high(btv,btv->mbox_clk);
4273 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4274 bus_low(btv,btv->mbox_clk);
4276 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4277 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4279 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4283 static int tea5757_write(struct bttv *btv, int value)
4288 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4290 if (btv->mbox_ior) {
4291 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4292 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4296 bttv_gpio_tracking(btv,"tea5757 write");
4298 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4299 bus_low(btv,btv->mbox_clk);
4300 bus_high(btv,btv->mbox_we);
4301 for (i = 0; i < 25; i++) {
4302 if (reg & 0x1000000)
4303 bus_high(btv,btv->mbox_data);
4305 bus_low(btv,btv->mbox_data);
4307 bus_high(btv,btv->mbox_clk);
4309 bus_low(btv,btv->mbox_clk);
4312 bus_low(btv,btv->mbox_we); /* unmute !!! */
4316 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4318 dprintk("tea5757_set_freq %d\n",freq);
4319 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4323 /* ----------------------------------------------------------------------- */
4326 static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
4328 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4329 int bits_out, loops, vol, data;
4332 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4333 v->flags |= VIDEO_AUDIO_VOLUME;
4337 /* 32 levels logarithmic */
4338 vol = 32 - ((v->volume>>11));
4340 bits_out = (PT2254_DBS_IN_2>>(vol%5));
4342 bits_out |= (PT2254_DBS_IN_10>>(vol/5));
4343 bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
4345 data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
4346 WINVIEW_PT2254_STROBE);
4347 for (loops = 17; loops >= 0 ; loops--) {
4348 if (bits_out & (1<<loops))
4349 data |= WINVIEW_PT2254_DATA;
4351 data &= ~WINVIEW_PT2254_DATA;
4354 data |= WINVIEW_PT2254_CLK;
4357 data &= ~WINVIEW_PT2254_CLK;
4360 data |= WINVIEW_PT2254_STROBE;
4361 data &= ~WINVIEW_PT2254_DATA;
4364 data &= ~WINVIEW_PT2254_STROBE;
4368 /* ----------------------------------------------------------------------- */
4369 /* mono/stereo control for various cards (which don't use i2c chips but */
4370 /* connect something to the GPIO pins */
4373 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
4375 unsigned int con = 0;
4378 gpio_inout(0x300, 0x300);
4379 if (v->mode & VIDEO_SOUND_LANG1)
4381 if (v->mode & VIDEO_SOUND_LANG2)
4383 if (v->mode & VIDEO_SOUND_STEREO)
4385 /* if (v->mode & VIDEO_SOUND_MONO)
4387 gpio_bits(0x300, con);
4389 v->mode = VIDEO_SOUND_STEREO |
4390 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4395 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
4397 unsigned int val, con;
4399 if (btv->radio_user)
4405 if (v->mode & VIDEO_SOUND_LANG2) {
4406 if (v->mode & VIDEO_SOUND_LANG1) {
4415 if (con != (val & 0x300)) {
4416 gpio_bits(0x300, con);
4418 bttv_gpio_tracking(btv,"gvbctv5pci");
4421 switch (val & 0x70) {
4423 v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4426 v->mode = VIDEO_SOUND_LANG2;
4429 v->mode = VIDEO_SOUND_LANG1;
4432 v->mode = VIDEO_SOUND_STEREO;
4435 v->mode = VIDEO_SOUND_MONO;
4438 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4439 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4445 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4446 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4447 * 0xdde enables mono and 0xccd enables sap
4449 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4450 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4451 * input/output sound connection, so both must be set for output mode.
4453 * Looks like it's needed only for the "tvphone", the "tvphone 98"
4454 * handles this with a tda9840
4458 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
4463 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4465 if (v->mode & VIDEO_SOUND_STEREO)
4468 gpio_bits(0x03,val);
4470 bttv_gpio_tracking(btv,"avermedia");
4473 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4480 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
4485 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4487 if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
4489 btaor(val, ~0x03, BT848_GPIO_DATA);
4491 bttv_gpio_tracking(btv,"avermedia");
4493 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4494 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4499 /* Lifetec 9415 handling */
4501 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
4505 if (gpio_read() & 0x4000) {
4506 v->mode = VIDEO_SOUND_MONO;
4511 if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
4513 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
4515 if ((v->mode & VIDEO_SOUND_LANG1) ||
4516 (v->mode & VIDEO_SOUND_MONO))
4518 gpio_bits(0x0880, val);
4520 bttv_gpio_tracking(btv,"lt9415");
4522 /* autodetect doesn't work with this card :-( */
4523 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4524 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4529 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4531 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
4533 unsigned int con = 0;
4536 gpio_inout(0x180000,0x180000);
4537 if (v->mode & VIDEO_SOUND_LANG2)
4539 if (v->mode & VIDEO_SOUND_STEREO)
4541 gpio_bits(0x180000, con);
4543 bttv_gpio_tracking(btv,"terratv");
4545 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4546 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4551 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
4553 unsigned long val = 0;
4556 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4557 if (v->mode & VIDEO_SOUND_MONO) /* Mono */
4559 if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
4561 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4563 if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
4566 gpio_bits(0x430000, val);
4568 bttv_gpio_tracking(btv,"winfast2000");
4571 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4572 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4577 * Dariusz Kowalewski <darekk@automex.pl>
4578 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4579 * revision 9B has on-board TDA9874A sound decoder).
4581 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4582 * will mute this cards.
4585 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
4587 unsigned int val = 0;
4589 if (btv->radio_user)
4593 if (v->mode & VIDEO_SOUND_MONO) {
4596 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4597 || (v->mode & VIDEO_SOUND_STEREO)) {
4601 gpio_bits(0x03,val);
4603 bttv_gpio_tracking(btv,"pvbt878p9b");
4606 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4607 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4612 * Dariusz Kowalewski <darekk@automex.pl>
4613 * sound control for FlyVideo 2000S (with tda9874 decoder)
4614 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4617 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
4619 unsigned int val = 0xffff;
4621 if (btv->radio_user)
4624 if (v->mode & VIDEO_SOUND_MONO) {
4627 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4628 || (v->mode & VIDEO_SOUND_STEREO)) {
4629 val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4631 if (val != 0xffff) {
4632 gpio_bits(0x1800, val);
4634 bttv_gpio_tracking(btv,"fv2000s");
4637 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4638 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4643 * sound control for Canopus WinDVR PCI
4644 * Masaki Suzuki <masaki@btree.org>
4647 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4649 unsigned long val = 0;
4652 if (v->mode & VIDEO_SOUND_MONO)
4654 if (v->mode & VIDEO_SOUND_LANG1)
4656 if (v->mode & VIDEO_SOUND_LANG2)
4658 if (v->mode & VIDEO_SOUND_STEREO)
4661 gpio_bits(0x140000, val);
4663 bttv_gpio_tracking(btv,"windvr");
4666 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4667 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4672 * sound control for AD-TVK503
4673 * Hiroshi Takekawa <sian@big.or.jp>
4676 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4678 unsigned int con = 0xffffff;
4680 /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4683 /* btor(***, BT848_GPIO_OUT_EN); */
4684 if (v->mode & VIDEO_SOUND_LANG1)
4686 if (v->mode & VIDEO_SOUND_LANG2)
4688 if (v->mode & VIDEO_SOUND_STEREO)
4690 if (v->mode & VIDEO_SOUND_MONO)
4692 if (con != 0xffffff) {
4693 gpio_bits(0x1e0000,con);
4695 bttv_gpio_tracking(btv, "adtvk503");
4698 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4699 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4703 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4705 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4706 * switch instead (CD22M3494E). This IC can have multiple active connections
4707 * between Xn (input) and Yn (output) pins. We need to clear any existing
4708 * connection prior to establish a new one, pulsing the STROBE pin.
4710 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4711 * GPIO pins are wired as:
4712 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4713 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4714 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4715 * GPIO[8] - - P3[5] (microcontroller)
4716 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4717 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4718 * GPINTR - - P3[4] (microcontroller)
4720 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4721 * configuration either directly (as we are doing) or using the microcontroller
4722 * which is also wired to I2C interface. I have no further info on the
4723 * microcontroller features, one would need to disassembly the firmware.
4724 * note: the vendor refused to give any information on this product, all
4725 * that stuff was found using a multimeter! :)
4727 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4729 /* reset all conections */
4730 gpio_bits(0x200,0x200);
4732 gpio_bits(0x200,0x000);
4735 /* create a new conection */
4736 gpio_bits(0x480,0x080);
4737 gpio_bits(0x480,0x480);
4739 gpio_bits(0x480,0x080);
4743 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4745 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4746 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4747 * chips, ten eight input analog multiplexors, a not chip and a few
4750 * 16 inputs on a secondary bracket are provided and can be selected
4751 * from each of the four capture chips. Two of the eight input
4752 * multiplexors are used to select from any of the 16 input signals.
4754 * Unsupported hardware capabilities:
4755 * . A video output monitor on the secondary bracket can be selected from
4756 * one of the 878A chips.
4757 * . Another passthrough but I haven't spent any time investigating it.
4758 * . Digital I/O (logic level connected to GPIO) is available from an
4761 * The on chip input mux should always be set to 2.
4762 * GPIO[16:19] - Video input selection
4763 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4764 * GPIO[?:?] - Digital I/O.
4766 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4767 * determined what function (if any) it provides. With the microcontroller
4768 * and sync seperator chips a guess is that it might have to do with video
4769 * switching and maybe some digital I/O.
4771 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4774 gpio_bits(0x0f0000, input << 16);
4777 static void tibetCS16_init(struct bttv *btv)
4779 /* enable gpio bits, mask obtained via btSpy */
4780 gpio_inout(0xffffff, 0x0f7fff);
4781 gpio_write(0x0f7fff);
4785 * The following routines for the Kodicom-4400r get a little mind-twisting.
4786 * There is a "master" controller and three "slave" controllers, together
4787 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4788 * The analog switch is controlled by the "master", but the detection order
4789 * of the four BT878A chips is in an order which I just don't understand.
4790 * The "master" is actually the second controller to be detected. The
4791 * logic on the board uses logical numbers for the 4 controllers, but
4792 * those numbers are different from the detection sequence. When working
4793 * with the analog switch, we need to "map" from the detection sequence
4794 * over to the board's logical controller number. This mapping sequence
4795 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4796 * unit 3, the second (which is the master) is logical unit 0, etc.
4797 * We need to maintain the status of the analog switch (which of the 16
4798 * cameras is connected to which of the 4 controllers). Rather than
4799 * add to the bttv structure for this, we use the data reserved for
4800 * the mbox (unused for this card type).
4804 * First a routine to set the analog switch, which controls which camera
4805 * is routed to which controller. The switch comprises an X-address
4806 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4807 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4808 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4809 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4810 * specified address. The idea is to set the address and data, then bring
4811 * STROBE high, and finally bring STROBE back to low.
4813 static void kodicom4400r_write(struct bttv *btv,
4814 unsigned char xaddr,
4815 unsigned char yaddr,
4816 unsigned char data) {
4819 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4820 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4821 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4822 gpio_bits(0x1ff, udata); /* strobe low */
4826 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4827 * use this routine. The routine finds the "master" for the card, maps
4828 * the controller number from the detected position over to the logical
4829 * number, writes the appropriate data to the analog switch, and housekeeps
4830 * the local copy of the switch information. The parameter 'input' is the
4831 * requested camera number (0 - 15).
4833 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4838 static unsigned char map[4] = {3, 0, 2, 1};
4840 mctlr = master[btv->c.nr];
4841 if (mctlr == NULL) { /* ignore if master not yet detected */
4844 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4846 sw_status = (char *)(&mctlr->mbox_we);
4847 xaddr = input & 0xf;
4848 /* Check if the controller/camera pair has changed, else ignore */
4849 if (sw_status[yaddr] != xaddr)
4851 /* "open" the old switch, "close" the new one, save the new */
4852 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4853 sw_status[yaddr] = xaddr;
4854 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4859 * During initialisation, we need to reset the analog switch. We
4860 * also preset the switch to map the 4 connectors on the card to the
4861 * *user's* (see above description of kodicom4400r_muxsel) channels
4864 static void kodicom4400r_init(struct bttv *btv)
4866 char *sw_status = (char *)(&btv->mbox_we);
4869 gpio_inout(0x0003ff, 0x0003ff);
4870 gpio_write(1 << 9); /* reset MUX */
4872 /* Preset camera 0 to the 4 controllers */
4873 for (ix = 0; ix < 4; ix++) {
4875 kodicom4400r_write(btv, ix, ix, 1);
4878 * Since this is the "master", we need to set up the
4879 * other three controller chips' pointers to this structure
4880 * for later use in the muxsel routine.
4882 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4884 master[btv->c.nr-1] = btv;
4885 master[btv->c.nr] = btv;
4886 master[btv->c.nr+1] = btv;
4887 master[btv->c.nr+2] = btv;
4890 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4891 * video multiplexers to provide up to 16 video inputs. These
4892 * multiplexers are controlled by the lower 8 GPIO pins of the
4893 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4895 * xxx0 is pin xxx of multiplexer U5,
4896 * yyy1 is pin yyy of multiplexer U2
4908 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4910 static const int masks[] = {
4911 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4912 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4913 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4914 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4916 gpio_write(masks[input%16]);
4918 static void picolo_tetra_init(struct bttv *btv)
4920 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4921 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4922 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4924 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4927 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4928 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4929 /*GPIO[20]&GPIO[21] used to choose the right input*/
4930 btwrite (input<<20,BT848_GPIO_DATA);
4935 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4937 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4938 * swichers to provide 16 channels to MUX0. The TDA8540's have
4939 * 4 independent outputs and as such the IVC120G also has the
4940 * optional "Monitor Out" bus. This allows the card to be looking
4941 * at one input while the monitor is looking at another.
4943 * Since I've couldn't be bothered figuring out how to add an
4944 * independant muxsel for the monitor bus, I've just set it to
4945 * whatever the card is looking at.
4947 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4948 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4950 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4951 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4952 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4953 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4957 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4958 #define I2C_TDA8540 0x90
4959 #define I2C_TDA8540_ALT1 0x92
4960 #define I2C_TDA8540_ALT2 0x94
4961 #define I2C_TDA8540_ALT3 0x96
4962 #define I2C_TDA8540_ALT4 0x98
4963 #define I2C_TDA8540_ALT5 0x9a
4964 #define I2C_TDA8540_ALT6 0x9c
4966 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4969 int key = input % 4;
4970 int matrix = input / 4;
4972 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4973 btv->c.nr, input, matrix, key);
4975 /* Handles the input selection on the TDA8540's */
4976 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4977 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4978 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4979 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4980 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4981 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4982 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4983 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4985 /* Handles the output enables on the TDA8540's */
4986 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4987 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4988 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4989 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4990 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4991 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4992 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4993 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4995 /* Selects MUX0 for input on the 878 */
4996 btaor((0)<<5, ~(3<<5), BT848_IFORM);
5000 /* PXC200 muxsel helper
5001 * luke@syseng.anu.edu.au
5002 * another transplant
5003 * from Alessandro Rubini (rubini@linux.it)
5005 * There are 4 kinds of cards:
5006 * PXC200L which is bt848
5007 * PXC200F which is bt848 with PIC controlling mux
5008 * PXC200AL which is bt878
5009 * PXC200AF which is bt878 with PIC controlling mux
5011 #define PX_CFG_PXC200F 0x01
5012 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
5013 #define PX_I2C_PIC 0x0f
5014 #define PX_PXC200A_CARDID 0x200a1295
5015 #define PX_I2C_CMD_CFG 0x00
5017 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
5022 unsigned char buf[2];
5024 /* Read PIC config to determine if this is a PXC200F */
5028 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
5030 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
5031 /* not PXC ? do nothing */
5035 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
5036 if (!(rc & PX_CFG_PXC200F)) {
5037 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
5042 /* The multiplexer in the 200F is handled by the GPIO port */
5043 /* get correct mapping between inputs */
5044 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
5045 /* ** not needed!? */
5048 /* make sure output pins are enabled */
5049 /* bitmask=0x30f; */
5051 /* check whether we have a PXC200A */
5052 if (btv->cardid == PX_PXC200A_CARDID) {
5053 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
5054 bitmask |= 7<<4; /* the DAC */
5056 btwrite(bitmask, BT848_GPIO_OUT_EN);
5058 bitmask = btread(BT848_GPIO_DATA);
5059 if (btv->cardid == PX_PXC200A_CARDID)
5060 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
5061 else /* older device */
5062 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
5063 btwrite(bitmask,BT848_GPIO_DATA);
5066 * Was "to be safe, set the bt848 to input 0"
5067 * Actually, since it's ok at load time, better not messing
5068 * with these bits (on PXC200AF you need to set mux 2 here)
5070 * needed because bttv-driver sets mux before calling this function
5072 if (btv->cardid == PX_PXC200A_CARDID)
5073 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
5074 else /* older device */
5075 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
5077 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
5080 /* ----------------------------------------------------------------------- */
5081 /* motherboard chipset specific stuff */
5083 void __devinit bttv_check_chipset(void)
5085 int pcipci_fail = 0;
5086 struct pci_dev *dev = NULL;
5088 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
5090 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
5092 if (pci_pci_problems & PCIPCI_VSFX)
5094 #ifdef PCIPCI_ALIMAGIK
5095 if (pci_pci_problems & PCIPCI_ALIMAGIK)
5100 /* print warnings about any quirks found */
5102 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
5104 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
5106 printk(KERN_INFO "bttv: bttv and your chipset may not work "
5109 printk(KERN_INFO "bttv: overlay will be disabled.\n");
5112 printk(KERN_INFO "bttv: overlay forced. Use this "
5113 "option at your own risk.\n");
5116 if (UNSET != latency)
5117 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
5118 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
5119 PCI_DEVICE_ID_INTEL_82441, dev))) {
5121 pci_read_config_byte(dev, 0x53, &b);
5123 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
5124 "bufcon=0x%02x\n",b);
5128 int __devinit bttv_handle_chipset(struct bttv *btv)
5130 unsigned char command;
5132 if (!triton1 && !vsfx && UNSET == latency)
5137 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
5138 if (vsfx && btv->id >= 878)
5139 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
5140 if (UNSET != latency)
5141 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
5145 if (btv->id < 878) {
5146 /* bt848 (mis)uses a bit in the irq mask for etbf */
5148 btv->triton1 = BT848_INT_ETBF;
5150 /* bt878 has a bit in the pci config space for it */
5151 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
5153 command |= BT878_EN_TBFX;
5155 command |= BT878_EN_VSFX;
5156 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
5158 if (UNSET != latency)
5159 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
projects / linux-2.6 / blob