Merge branch 'core/rodata' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux...
[linux-2.6] / arch / arm / mach-omap2 / usb-tusb6010.c
1 /*
2  * linux/arch/arm/mach-omap2/usb-tusb6010.c
3  *
4  * Copyright (C) 2006 Nokia Corporation
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10
11 #include <linux/types.h>
12 #include <linux/errno.h>
13 #include <linux/delay.h>
14 #include <linux/platform_device.h>
15
16 #include <linux/usb/musb.h>
17
18 #include <asm/arch/gpmc.h>
19 #include <asm/arch/gpio.h>
20 #include <asm/arch/mux.h>
21
22
23 static u8               async_cs, sync_cs;
24 static unsigned         refclk_psec;
25
26
27 /* t2_ps, when quantized to fclk units, must happen no earlier than
28  * the clock after after t1_NS.
29  *
30  * Return a possibly updated value of t2_ps, converted to nsec.
31  */
32 static unsigned
33 next_clk(unsigned t1_NS, unsigned t2_ps, unsigned fclk_ps)
34 {
35         unsigned        t1_ps = t1_NS * 1000;
36         unsigned        t1_f, t2_f;
37
38         if ((t1_ps + fclk_ps) < t2_ps)
39                 return t2_ps / 1000;
40
41         t1_f = (t1_ps + fclk_ps - 1) / fclk_ps;
42         t2_f = (t2_ps + fclk_ps - 1) / fclk_ps;
43
44         if (t1_f >= t2_f)
45                 t2_f = t1_f + 1;
46
47         return (t2_f * fclk_ps) / 1000;
48 }
49
50 /* NOTE:  timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
51
52 static int tusb_set_async_mode(unsigned sysclk_ps, unsigned fclk_ps)
53 {
54         struct gpmc_timings     t;
55         unsigned                t_acsnh_advnh = sysclk_ps + 3000;
56         unsigned                tmp;
57
58         memset(&t, 0, sizeof(t));
59
60         /* CS_ON = t_acsnh_acsnl */
61         t.cs_on = 8;
62         /* ADV_ON = t_acsnh_advnh - t_advn */
63         t.adv_on = next_clk(t.cs_on, t_acsnh_advnh - 7000, fclk_ps);
64
65         /*
66          * READ ... from omap2420 TRM fig 12-13
67          */
68
69         /* ADV_RD_OFF = t_acsnh_advnh */
70         t.adv_rd_off = next_clk(t.adv_on, t_acsnh_advnh, fclk_ps);
71
72         /* OE_ON = t_acsnh_advnh + t_advn_oen (then wait for nRDY) */
73         t.oe_on = next_clk(t.adv_on, t_acsnh_advnh + 1000, fclk_ps);
74
75         /* ACCESS = counters continue only after nRDY */
76         tmp = t.oe_on * 1000 + 300;
77         t.access = next_clk(t.oe_on, tmp, fclk_ps);
78
79         /* OE_OFF = after data gets sampled */
80         tmp = t.access * 1000;
81         t.oe_off = next_clk(t.access, tmp, fclk_ps);
82
83         t.cs_rd_off = t.oe_off;
84
85         tmp = t.cs_rd_off * 1000 + 7000 /* t_acsn_rdy_z */;
86         t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
87
88         /*
89          * WRITE ... from omap2420 TRM fig 12-15
90          */
91
92         /* ADV_WR_OFF = t_acsnh_advnh */
93         t.adv_wr_off = t.adv_rd_off;
94
95         /* WE_ON = t_acsnh_advnh + t_advn_wen (then wait for nRDY) */
96         t.we_on = next_clk(t.adv_wr_off, t_acsnh_advnh + 1000, fclk_ps);
97
98         /* WE_OFF = after data gets sampled */
99         tmp = t.we_on * 1000 + 300;
100         t.we_off = next_clk(t.we_on, tmp, fclk_ps);
101
102         t.cs_wr_off = t.we_off;
103
104         tmp = t.cs_wr_off * 1000 + 7000 /* t_acsn_rdy_z */;
105         t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
106
107         return gpmc_cs_set_timings(async_cs, &t);
108 }
109
110 static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps)
111 {
112         struct gpmc_timings     t;
113         unsigned                t_scsnh_advnh = sysclk_ps + 3000;
114         unsigned                tmp;
115
116         memset(&t, 0, sizeof(t));
117         t.cs_on = 8;
118
119         /* ADV_ON = t_acsnh_advnh - t_advn */
120         t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps);
121
122         /* GPMC_CLK rate = fclk rate / div */
123         t.sync_clk = 12 /* 11.1 nsec */;
124         tmp = (t.sync_clk * 1000 + fclk_ps - 1) / fclk_ps;
125         if (tmp > 4)
126                 return -ERANGE;
127         if (tmp <= 0)
128                 tmp = 1;
129         t.page_burst_access = (fclk_ps * tmp) / 1000;
130
131         /*
132          * READ ... based on omap2420 TRM fig 12-19, 12-20
133          */
134
135         /* ADV_RD_OFF = t_scsnh_advnh */
136         t.adv_rd_off = next_clk(t.adv_on, t_scsnh_advnh, fclk_ps);
137
138         /* OE_ON = t_scsnh_advnh + t_advn_oen * fclk_ps (then wait for nRDY) */
139         tmp = (t.adv_rd_off * 1000) + (3 * fclk_ps);
140         t.oe_on = next_clk(t.adv_on, tmp, fclk_ps);
141
142         /* ACCESS = number of clock cycles after t_adv_eon */
143         tmp = (t.oe_on * 1000) + (5 * fclk_ps);
144         t.access = next_clk(t.oe_on, tmp, fclk_ps);
145
146         /* OE_OFF = after data gets sampled */
147         tmp = (t.access * 1000) + (1 * fclk_ps);
148         t.oe_off = next_clk(t.access, tmp, fclk_ps);
149
150         t.cs_rd_off = t.oe_off;
151
152         tmp = t.cs_rd_off * 1000 + 7000 /* t_scsn_rdy_z */;
153         t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
154
155         /*
156          * WRITE ... based on omap2420 TRM fig 12-21
157          */
158
159         /* ADV_WR_OFF = t_scsnh_advnh */
160         t.adv_wr_off = t.adv_rd_off;
161
162         /* WE_ON = t_scsnh_advnh + t_advn_wen * fclk_ps (then wait for nRDY) */
163         tmp = (t.adv_wr_off * 1000) + (3 * fclk_ps);
164         t.we_on = next_clk(t.adv_wr_off, tmp, fclk_ps);
165
166         /* WE_OFF = number of clock cycles after t_adv_wen */
167         tmp = (t.we_on * 1000) + (6 * fclk_ps);
168         t.we_off = next_clk(t.we_on, tmp, fclk_ps);
169
170         t.cs_wr_off = t.we_off;
171
172         tmp = t.cs_wr_off * 1000 + 7000 /* t_scsn_rdy_z */;
173         t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
174
175         return gpmc_cs_set_timings(sync_cs, &t);
176 }
177
178 extern unsigned long gpmc_get_fclk_period(void);
179
180 /* tusb driver calls this when it changes the chip's clocking */
181 int tusb6010_platform_retime(unsigned is_refclk)
182 {
183         static const char       error[] =
184                 KERN_ERR "tusb6010 %s retime error %d\n";
185
186         unsigned        fclk_ps = gpmc_get_fclk_period();
187         unsigned        sysclk_ps;
188         int             status;
189
190         if (!refclk_psec)
191                 return -ENODEV;
192
193         sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
194
195         status = tusb_set_async_mode(sysclk_ps, fclk_ps);
196         if (status < 0) {
197                 printk(error, "async", status);
198                 goto done;
199         }
200         status = tusb_set_sync_mode(sysclk_ps, fclk_ps);
201         if (status < 0)
202                 printk(error, "sync", status);
203 done:
204         return status;
205 }
206 EXPORT_SYMBOL_GPL(tusb6010_platform_retime);
207
208 static struct resource tusb_resources[] = {
209         /* Order is significant!  The start/end fields
210          * are updated during setup..
211          */
212         { /* Asynchronous access */
213                 .flags  = IORESOURCE_MEM,
214         },
215         { /* Synchronous access */
216                 .flags  = IORESOURCE_MEM,
217         },
218         { /* IRQ */
219                 .flags  = IORESOURCE_IRQ,
220         },
221 };
222
223 static u64 tusb_dmamask = ~(u32)0;
224
225 static struct platform_device tusb_device = {
226         .name           = "musb_hdrc",
227         .id             = -1,
228         .dev = {
229                 .dma_mask               = &tusb_dmamask,
230                 .coherent_dma_mask      = 0xffffffff,
231         },
232         .num_resources  = ARRAY_SIZE(tusb_resources),
233         .resource       = tusb_resources,
234 };
235
236
237 /* this may be called only from board-*.c setup code */
238 int __init
239 tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
240                 unsigned ps_refclk, unsigned waitpin,
241                 unsigned async, unsigned sync,
242                 unsigned irq, unsigned dmachan)
243 {
244         int             status;
245         static char     error[] __initdata =
246                 KERN_ERR "tusb6010 init error %d, %d\n";
247
248         /* ASYNC region, primarily for PIO */
249         status = gpmc_cs_request(async, SZ_16M, (unsigned long *)
250                                 &tusb_resources[0].start);
251         if (status < 0) {
252                 printk(error, 1, status);
253                 return status;
254         }
255         tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
256         async_cs = async;
257         gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
258                           GPMC_CONFIG1_PAGE_LEN(2)
259                         | GPMC_CONFIG1_WAIT_READ_MON
260                         | GPMC_CONFIG1_WAIT_WRITE_MON
261                         | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
262                         | GPMC_CONFIG1_READTYPE_ASYNC
263                         | GPMC_CONFIG1_WRITETYPE_ASYNC
264                         | GPMC_CONFIG1_DEVICESIZE_16
265                         | GPMC_CONFIG1_DEVICETYPE_NOR
266                         | GPMC_CONFIG1_MUXADDDATA);
267
268
269         /* SYNC region, primarily for DMA */
270         status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
271                                 &tusb_resources[1].start);
272         if (status < 0) {
273                 printk(error, 2, status);
274                 return status;
275         }
276         tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
277         sync_cs = sync;
278         gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
279                           GPMC_CONFIG1_READMULTIPLE_SUPP
280                         | GPMC_CONFIG1_READTYPE_SYNC
281                         | GPMC_CONFIG1_WRITEMULTIPLE_SUPP
282                         | GPMC_CONFIG1_WRITETYPE_SYNC
283                         | GPMC_CONFIG1_CLKACTIVATIONTIME(1)
284                         | GPMC_CONFIG1_PAGE_LEN(2)
285                         | GPMC_CONFIG1_WAIT_READ_MON
286                         | GPMC_CONFIG1_WAIT_WRITE_MON
287                         | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
288                         | GPMC_CONFIG1_DEVICESIZE_16
289                         | GPMC_CONFIG1_DEVICETYPE_NOR
290                         | GPMC_CONFIG1_MUXADDDATA
291                         /* fclk divider gets set later */
292                         );
293
294         /* IRQ */
295         status = omap_request_gpio(irq);
296         if (status < 0) {
297                 printk(error, 3, status);
298                 return status;
299         }
300         omap_set_gpio_direction(irq, 1);
301         tusb_resources[2].start = irq + IH_GPIO_BASE;
302
303         /* set up memory timings ... can speed them up later */
304         if (!ps_refclk) {
305                 printk(error, 4, status);
306                 return -ENODEV;
307         }
308         refclk_psec = ps_refclk;
309         status = tusb6010_platform_retime(1);
310         if (status < 0) {
311                 printk(error, 5, status);
312                 return status;
313         }
314
315         /* finish device setup ... */
316         if (!data) {
317                 printk(error, 6, status);
318                 return -ENODEV;
319         }
320         data->multipoint = 1;
321         tusb_device.dev.platform_data = data;
322
323         /* REVISIT let the driver know what DMA channels work */
324         if (!dmachan)
325                 tusb_device.dev.dma_mask = NULL;
326         else {
327                 /* assume OMAP 2420 ES2.0 and later */
328                 if (dmachan & (1 << 0))
329                         omap_cfg_reg(AA10_242X_DMAREQ0);
330                 if (dmachan & (1 << 1))
331                         omap_cfg_reg(AA6_242X_DMAREQ1);
332                 if (dmachan & (1 << 2))
333                         omap_cfg_reg(E4_242X_DMAREQ2);
334                 if (dmachan & (1 << 3))
335                         omap_cfg_reg(G4_242X_DMAREQ3);
336                 if (dmachan & (1 << 4))
337                         omap_cfg_reg(D3_242X_DMAREQ4);
338                 if (dmachan & (1 << 5))
339                         omap_cfg_reg(E3_242X_DMAREQ5);
340         }
341
342         /* so far so good ... register the device */
343         status = platform_device_register(&tusb_device);
344         if (status < 0) {
345                 printk(error, 7, status);
346                 return status;
347         }
348         return 0;
349 }