Merge branch 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
[linux-2.6] / arch / powerpc / platforms / powermac / low_i2c.c
1 /*
2  * arch/powerpc/platforms/powermac/low_i2c.c
3  *
4  *  Copyright (C) 2003-2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
5  *
6  *  This program is free software; you can redistribute it and/or
7  *  modify it under the terms of the GNU General Public License
8  *  as published by the Free Software Foundation; either version
9  *  2 of the License, or (at your option) any later version.
10  *
11  * The linux i2c layer isn't completely suitable for our needs for various
12  * reasons ranging from too late initialisation to semantics not perfectly
13  * matching some requirements of the apple platform functions etc...
14  *
15  * This file thus provides a simple low level unified i2c interface for
16  * powermac that covers the various types of i2c busses used in Apple machines.
17  * For now, keywest, PMU and SMU, though we could add Cuda, or other bit
18  * banging busses found on older chipstes in earlier machines if we ever need
19  * one of them.
20  *
21  * The drivers in this file are synchronous/blocking. In addition, the
22  * keywest one is fairly slow due to the use of msleep instead of interrupts
23  * as the interrupt is currently used by i2c-keywest. In the long run, we
24  * might want to get rid of those high-level interfaces to linux i2c layer
25  * either completely (converting all drivers) or replacing them all with a
26  * single stub driver on top of this one. Once done, the interrupt will be
27  * available for our use.
28  */
29
30 #undef DEBUG
31 #undef DEBUG_LOW
32
33 #include <linux/types.h>
34 #include <linux/sched.h>
35 #include <linux/init.h>
36 #include <linux/module.h>
37 #include <linux/adb.h>
38 #include <linux/pmu.h>
39 #include <linux/delay.h>
40 #include <linux/completion.h>
41 #include <linux/platform_device.h>
42 #include <linux/interrupt.h>
43 #include <linux/timer.h>
44 #include <linux/mutex.h>
45 #include <asm/keylargo.h>
46 #include <asm/uninorth.h>
47 #include <asm/io.h>
48 #include <asm/prom.h>
49 #include <asm/machdep.h>
50 #include <asm/smu.h>
51 #include <asm/pmac_pfunc.h>
52 #include <asm/pmac_low_i2c.h>
53
54 #ifdef DEBUG
55 #define DBG(x...) do {\
56                 printk(KERN_DEBUG "low_i2c:" x);        \
57         } while(0)
58 #else
59 #define DBG(x...)
60 #endif
61
62 #ifdef DEBUG_LOW
63 #define DBG_LOW(x...) do {\
64                 printk(KERN_DEBUG "low_i2c:" x);        \
65         } while(0)
66 #else
67 #define DBG_LOW(x...)
68 #endif
69
70
71 static int pmac_i2c_force_poll = 1;
72
73 /*
74  * A bus structure. Each bus in the system has such a structure associated.
75  */
76 struct pmac_i2c_bus
77 {
78         struct list_head        link;
79         struct device_node      *controller;
80         struct device_node      *busnode;
81         int                     type;
82         int                     flags;
83         struct i2c_adapter      *adapter;
84         void                    *hostdata;
85         int                     channel;        /* some hosts have multiple */
86         int                     mode;           /* current mode */
87         struct mutex            mutex;
88         int                     opened;
89         int                     polled;         /* open mode */
90         struct platform_device  *platform_dev;
91
92         /* ops */
93         int (*open)(struct pmac_i2c_bus *bus);
94         void (*close)(struct pmac_i2c_bus *bus);
95         int (*xfer)(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
96                     u32 subaddr, u8 *data, int len);
97 };
98
99 static LIST_HEAD(pmac_i2c_busses);
100
101 /*
102  * Keywest implementation
103  */
104
105 struct pmac_i2c_host_kw
106 {
107         struct mutex            mutex;          /* Access mutex for use by
108                                                  * i2c-keywest */
109         void __iomem            *base;          /* register base address */
110         int                     bsteps;         /* register stepping */
111         int                     speed;          /* speed */
112         int                     irq;
113         u8                      *data;
114         unsigned                len;
115         int                     state;
116         int                     rw;
117         int                     polled;
118         int                     result;
119         struct completion       complete;
120         spinlock_t              lock;
121         struct timer_list       timeout_timer;
122 };
123
124 /* Register indices */
125 typedef enum {
126         reg_mode = 0,
127         reg_control,
128         reg_status,
129         reg_isr,
130         reg_ier,
131         reg_addr,
132         reg_subaddr,
133         reg_data
134 } reg_t;
135
136 /* The Tumbler audio equalizer can be really slow sometimes */
137 #define KW_POLL_TIMEOUT         (2*HZ)
138
139 /* Mode register */
140 #define KW_I2C_MODE_100KHZ      0x00
141 #define KW_I2C_MODE_50KHZ       0x01
142 #define KW_I2C_MODE_25KHZ       0x02
143 #define KW_I2C_MODE_DUMB        0x00
144 #define KW_I2C_MODE_STANDARD    0x04
145 #define KW_I2C_MODE_STANDARDSUB 0x08
146 #define KW_I2C_MODE_COMBINED    0x0C
147 #define KW_I2C_MODE_MODE_MASK   0x0C
148 #define KW_I2C_MODE_CHAN_MASK   0xF0
149
150 /* Control register */
151 #define KW_I2C_CTL_AAK          0x01
152 #define KW_I2C_CTL_XADDR        0x02
153 #define KW_I2C_CTL_STOP         0x04
154 #define KW_I2C_CTL_START        0x08
155
156 /* Status register */
157 #define KW_I2C_STAT_BUSY        0x01
158 #define KW_I2C_STAT_LAST_AAK    0x02
159 #define KW_I2C_STAT_LAST_RW     0x04
160 #define KW_I2C_STAT_SDA         0x08
161 #define KW_I2C_STAT_SCL         0x10
162
163 /* IER & ISR registers */
164 #define KW_I2C_IRQ_DATA         0x01
165 #define KW_I2C_IRQ_ADDR         0x02
166 #define KW_I2C_IRQ_STOP         0x04
167 #define KW_I2C_IRQ_START        0x08
168 #define KW_I2C_IRQ_MASK         0x0F
169
170 /* State machine states */
171 enum {
172         state_idle,
173         state_addr,
174         state_read,
175         state_write,
176         state_stop,
177         state_dead
178 };
179
180 #define WRONG_STATE(name) do {\
181                 printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s " \
182                        "(isr: %02x)\n", \
183                        name, __kw_state_names[host->state], isr); \
184         } while(0)
185
186 static const char *__kw_state_names[] = {
187         "state_idle",
188         "state_addr",
189         "state_read",
190         "state_write",
191         "state_stop",
192         "state_dead"
193 };
194
195 static inline u8 __kw_read_reg(struct pmac_i2c_host_kw *host, reg_t reg)
196 {
197         return readb(host->base + (((unsigned int)reg) << host->bsteps));
198 }
199
200 static inline void __kw_write_reg(struct pmac_i2c_host_kw *host,
201                                   reg_t reg, u8 val)
202 {
203         writeb(val, host->base + (((unsigned)reg) << host->bsteps));
204         (void)__kw_read_reg(host, reg_subaddr);
205 }
206
207 #define kw_write_reg(reg, val)  __kw_write_reg(host, reg, val)
208 #define kw_read_reg(reg)        __kw_read_reg(host, reg)
209
210 static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host)
211 {
212         int i, j;
213         u8 isr;
214         
215         for (i = 0; i < 1000; i++) {
216                 isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK;
217                 if (isr != 0)
218                         return isr;
219
220                 /* This code is used with the timebase frozen, we cannot rely
221                  * on udelay nor schedule when in polled mode !
222                  * For now, just use a bogus loop....
223                  */
224                 if (host->polled) {
225                         for (j = 1; j < 100000; j++)
226                                 mb();
227                 } else
228                         msleep(1);
229         }
230         return isr;
231 }
232
233 static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result)
234 {
235         kw_write_reg(reg_control, KW_I2C_CTL_STOP);
236         host->state = state_stop;
237         host->result = result;
238 }
239
240
241 static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
242 {
243         u8 ack;
244
245         DBG_LOW("kw_handle_interrupt(%s, isr: %x)\n",
246                 __kw_state_names[host->state], isr);
247
248         if (host->state == state_idle) {
249                 printk(KERN_WARNING "low_i2c: Keywest got an out of state"
250                        " interrupt, ignoring\n");
251                 kw_write_reg(reg_isr, isr);
252                 return;
253         }
254
255         if (isr == 0) {
256                 printk(KERN_WARNING "low_i2c: Timeout in i2c transfer"
257                        " on keywest !\n");
258                 if (host->state != state_stop) {
259                         kw_i2c_do_stop(host, -EIO);
260                         return;
261                 }
262                 ack = kw_read_reg(reg_status);
263                 if (ack & KW_I2C_STAT_BUSY)
264                         kw_write_reg(reg_status, 0);
265                 host->state = state_idle;
266                 kw_write_reg(reg_ier, 0x00);
267                 if (!host->polled)
268                         complete(&host->complete);
269                 return;
270         }
271
272         if (isr & KW_I2C_IRQ_ADDR) {
273                 ack = kw_read_reg(reg_status);
274                 if (host->state != state_addr) {
275                         WRONG_STATE("KW_I2C_IRQ_ADDR"); 
276                         kw_i2c_do_stop(host, -EIO);
277                 }
278                 if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
279                         host->result = -ENXIO;
280                         host->state = state_stop;
281                         DBG_LOW("KW: NAK on address\n");
282                 } else {
283                         if (host->len == 0)
284                                 kw_i2c_do_stop(host, 0);
285                         else if (host->rw) {
286                                 host->state = state_read;
287                                 if (host->len > 1)
288                                         kw_write_reg(reg_control,
289                                                      KW_I2C_CTL_AAK);
290                         } else {
291                                 host->state = state_write;
292                                 kw_write_reg(reg_data, *(host->data++));
293                                 host->len--;
294                         }
295                 }
296                 kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
297         }
298
299         if (isr & KW_I2C_IRQ_DATA) {
300                 if (host->state == state_read) {
301                         *(host->data++) = kw_read_reg(reg_data);
302                         host->len--;
303                         kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
304                         if (host->len == 0)
305                                 host->state = state_stop;
306                         else if (host->len == 1)
307                                 kw_write_reg(reg_control, 0);
308                 } else if (host->state == state_write) {
309                         ack = kw_read_reg(reg_status);
310                         if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
311                                 DBG_LOW("KW: nack on data write\n");
312                                 host->result = -EFBIG;
313                                 host->state = state_stop;
314                         } else if (host->len) {
315                                 kw_write_reg(reg_data, *(host->data++));
316                                 host->len--;
317                         } else
318                                 kw_i2c_do_stop(host, 0);
319                 } else {
320                         WRONG_STATE("KW_I2C_IRQ_DATA"); 
321                         if (host->state != state_stop)
322                                 kw_i2c_do_stop(host, -EIO);
323                 }
324                 kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
325         }
326
327         if (isr & KW_I2C_IRQ_STOP) {
328                 kw_write_reg(reg_isr, KW_I2C_IRQ_STOP);
329                 if (host->state != state_stop) {
330                         WRONG_STATE("KW_I2C_IRQ_STOP");
331                         host->result = -EIO;
332                 }
333                 host->state = state_idle;
334                 if (!host->polled)
335                         complete(&host->complete);
336         }
337
338         /* Below should only happen in manual mode which we don't use ... */
339         if (isr & KW_I2C_IRQ_START)
340                 kw_write_reg(reg_isr, KW_I2C_IRQ_START);
341
342 }
343
344 /* Interrupt handler */
345 static irqreturn_t kw_i2c_irq(int irq, void *dev_id)
346 {
347         struct pmac_i2c_host_kw *host = dev_id;
348         unsigned long flags;
349
350         spin_lock_irqsave(&host->lock, flags);
351         del_timer(&host->timeout_timer);
352         kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
353         if (host->state != state_idle) {
354                 host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
355                 add_timer(&host->timeout_timer);
356         }
357         spin_unlock_irqrestore(&host->lock, flags);
358         return IRQ_HANDLED;
359 }
360
361 static void kw_i2c_timeout(unsigned long data)
362 {
363         struct pmac_i2c_host_kw *host = (struct pmac_i2c_host_kw *)data;
364         unsigned long flags;
365
366         spin_lock_irqsave(&host->lock, flags);
367         kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
368         if (host->state != state_idle) {
369                 host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
370                 add_timer(&host->timeout_timer);
371         }
372         spin_unlock_irqrestore(&host->lock, flags);
373 }
374
375 static int kw_i2c_open(struct pmac_i2c_bus *bus)
376 {
377         struct pmac_i2c_host_kw *host = bus->hostdata;
378         mutex_lock(&host->mutex);
379         return 0;
380 }
381
382 static void kw_i2c_close(struct pmac_i2c_bus *bus)
383 {
384         struct pmac_i2c_host_kw *host = bus->hostdata;
385         mutex_unlock(&host->mutex);
386 }
387
388 static int kw_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
389                        u32 subaddr, u8 *data, int len)
390 {
391         struct pmac_i2c_host_kw *host = bus->hostdata;
392         u8 mode_reg = host->speed;
393         int use_irq = host->irq != NO_IRQ && !bus->polled;
394
395         /* Setup mode & subaddress if any */
396         switch(bus->mode) {
397         case pmac_i2c_mode_dumb:
398                 return -EINVAL;
399         case pmac_i2c_mode_std:
400                 mode_reg |= KW_I2C_MODE_STANDARD;
401                 if (subsize != 0)
402                         return -EINVAL;
403                 break;
404         case pmac_i2c_mode_stdsub:
405                 mode_reg |= KW_I2C_MODE_STANDARDSUB;
406                 if (subsize != 1)
407                         return -EINVAL;
408                 break;
409         case pmac_i2c_mode_combined:
410                 mode_reg |= KW_I2C_MODE_COMBINED;
411                 if (subsize != 1)
412                         return -EINVAL;
413                 break;
414         }
415
416         /* Setup channel & clear pending irqs */
417         kw_write_reg(reg_isr, kw_read_reg(reg_isr));
418         kw_write_reg(reg_mode, mode_reg | (bus->channel << 4));
419         kw_write_reg(reg_status, 0);
420
421         /* Set up address and r/w bit, strip possible stale bus number from
422          * address top bits
423          */
424         kw_write_reg(reg_addr, addrdir & 0xff);
425
426         /* Set up the sub address */
427         if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
428             || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
429                 kw_write_reg(reg_subaddr, subaddr);
430
431         /* Prepare for async operations */
432         host->data = data;
433         host->len = len;
434         host->state = state_addr;
435         host->result = 0;
436         host->rw = (addrdir & 1);
437         host->polled = bus->polled;
438
439         /* Enable interrupt if not using polled mode and interrupt is
440          * available
441          */
442         if (use_irq) {
443                 /* Clear completion */
444                 INIT_COMPLETION(host->complete);
445                 /* Ack stale interrupts */
446                 kw_write_reg(reg_isr, kw_read_reg(reg_isr));
447                 /* Arm timeout */
448                 host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
449                 add_timer(&host->timeout_timer);
450                 /* Enable emission */
451                 kw_write_reg(reg_ier, KW_I2C_IRQ_MASK);
452         }
453
454         /* Start sending address */
455         kw_write_reg(reg_control, KW_I2C_CTL_XADDR);
456
457         /* Wait for completion */
458         if (use_irq)
459                 wait_for_completion(&host->complete);
460         else {
461                 while(host->state != state_idle) {
462                         unsigned long flags;
463
464                         u8 isr = kw_i2c_wait_interrupt(host);
465                         spin_lock_irqsave(&host->lock, flags);
466                         kw_i2c_handle_interrupt(host, isr);
467                         spin_unlock_irqrestore(&host->lock, flags);
468                 }
469         }
470
471         /* Disable emission */
472         kw_write_reg(reg_ier, 0);
473
474         return host->result;
475 }
476
477 static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
478 {
479         struct pmac_i2c_host_kw *host;
480         const u32               *psteps, *prate, *addrp;
481         u32                     steps;
482
483         host = kzalloc(sizeof(struct pmac_i2c_host_kw), GFP_KERNEL);
484         if (host == NULL) {
485                 printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
486                        np->full_name);
487                 return NULL;
488         }
489
490         /* Apple is kind enough to provide a valid AAPL,address property
491          * on all i2c keywest nodes so far ... we would have to fallback
492          * to macio parsing if that wasn't the case
493          */
494         addrp = of_get_property(np, "AAPL,address", NULL);
495         if (addrp == NULL) {
496                 printk(KERN_ERR "low_i2c: Can't find address for %s\n",
497                        np->full_name);
498                 kfree(host);
499                 return NULL;
500         }
501         mutex_init(&host->mutex);
502         init_completion(&host->complete);
503         spin_lock_init(&host->lock);
504         init_timer(&host->timeout_timer);
505         host->timeout_timer.function = kw_i2c_timeout;
506         host->timeout_timer.data = (unsigned long)host;
507
508         psteps = of_get_property(np, "AAPL,address-step", NULL);
509         steps = psteps ? (*psteps) : 0x10;
510         for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
511                 steps >>= 1;
512         /* Select interface rate */
513         host->speed = KW_I2C_MODE_25KHZ;
514         prate = of_get_property(np, "AAPL,i2c-rate", NULL);
515         if (prate) switch(*prate) {
516         case 100:
517                 host->speed = KW_I2C_MODE_100KHZ;
518                 break;
519         case 50:
520                 host->speed = KW_I2C_MODE_50KHZ;
521                 break;
522         case 25:
523                 host->speed = KW_I2C_MODE_25KHZ;
524                 break;
525         }       
526         host->irq = irq_of_parse_and_map(np, 0);
527         if (host->irq == NO_IRQ)
528                 printk(KERN_WARNING
529                        "low_i2c: Failed to map interrupt for %s\n",
530                        np->full_name);
531
532         host->base = ioremap((*addrp), 0x1000);
533         if (host->base == NULL) {
534                 printk(KERN_ERR "low_i2c: Can't map registers for %s\n",
535                        np->full_name);
536                 kfree(host);
537                 return NULL;
538         }
539
540         /* Make sure IRQ is disabled */
541         kw_write_reg(reg_ier, 0);
542
543         /* Request chip interrupt */
544         if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
545                 host->irq = NO_IRQ;
546
547         printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
548                *addrp, host->irq, np->full_name);
549
550         return host;
551 }
552
553
554 static void __init kw_i2c_add(struct pmac_i2c_host_kw *host,
555                               struct device_node *controller,
556                               struct device_node *busnode,
557                               int channel)
558 {
559         struct pmac_i2c_bus *bus;
560
561         bus = kzalloc(sizeof(struct pmac_i2c_bus), GFP_KERNEL);
562         if (bus == NULL)
563                 return;
564
565         bus->controller = of_node_get(controller);
566         bus->busnode = of_node_get(busnode);
567         bus->type = pmac_i2c_bus_keywest;
568         bus->hostdata = host;
569         bus->channel = channel;
570         bus->mode = pmac_i2c_mode_std;
571         bus->open = kw_i2c_open;
572         bus->close = kw_i2c_close;
573         bus->xfer = kw_i2c_xfer;
574         mutex_init(&bus->mutex);
575         if (controller == busnode)
576                 bus->flags = pmac_i2c_multibus;
577         list_add(&bus->link, &pmac_i2c_busses);
578
579         printk(KERN_INFO " channel %d bus %s\n", channel,
580                (controller == busnode) ? "<multibus>" : busnode->full_name);
581 }
582
583 static void __init kw_i2c_probe(void)
584 {
585         struct device_node *np, *child, *parent;
586
587         /* Probe keywest-i2c busses */
588         for_each_compatible_node(np, "i2c","keywest-i2c") {
589                 struct pmac_i2c_host_kw *host;
590                 int multibus, chans, i;
591
592                 /* Found one, init a host structure */
593                 host = kw_i2c_host_init(np);
594                 if (host == NULL)
595                         continue;
596
597                 /* Now check if we have a multibus setup (old style) or if we
598                  * have proper bus nodes. Note that the "new" way (proper bus
599                  * nodes) might cause us to not create some busses that are
600                  * kept hidden in the device-tree. In the future, we might
601                  * want to work around that by creating busses without a node
602                  * but not for now
603                  */
604                 child = of_get_next_child(np, NULL);
605                 multibus = !child || strcmp(child->name, "i2c-bus");
606                 of_node_put(child);
607
608                 /* For a multibus setup, we get the bus count based on the
609                  * parent type
610                  */
611                 if (multibus) {
612                         parent = of_get_parent(np);
613                         if (parent == NULL)
614                                 continue;
615                         chans = parent->name[0] == 'u' ? 2 : 1;
616                         for (i = 0; i < chans; i++)
617                                 kw_i2c_add(host, np, np, i);
618                 } else {
619                         for (child = NULL;
620                              (child = of_get_next_child(np, child)) != NULL;) {
621                                 const u32 *reg = of_get_property(child,
622                                                 "reg", NULL);
623                                 if (reg == NULL)
624                                         continue;
625                                 kw_i2c_add(host, np, child, *reg);
626                         }
627                 }
628         }
629 }
630
631
632 /*
633  *
634  * PMU implementation
635  *
636  */
637
638 #ifdef CONFIG_ADB_PMU
639
640 /*
641  * i2c command block to the PMU
642  */
643 struct pmu_i2c_hdr {
644         u8      bus;
645         u8      mode;
646         u8      bus2;
647         u8      address;
648         u8      sub_addr;
649         u8      comb_addr;
650         u8      count;
651         u8      data[];
652 };
653
654 static void pmu_i2c_complete(struct adb_request *req)
655 {
656         complete(req->arg);
657 }
658
659 static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
660                         u32 subaddr, u8 *data, int len)
661 {
662         struct adb_request *req = bus->hostdata;
663         struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req->data[1];
664         struct completion comp;
665         int read = addrdir & 1;
666         int retry;
667         int rc = 0;
668
669         /* For now, limit ourselves to 16 bytes transfers */
670         if (len > 16)
671                 return -EINVAL;
672
673         init_completion(&comp);
674
675         for (retry = 0; retry < 16; retry++) {
676                 memset(req, 0, sizeof(struct adb_request));
677                 hdr->bus = bus->channel;
678                 hdr->count = len;
679
680                 switch(bus->mode) {
681                 case pmac_i2c_mode_std:
682                         if (subsize != 0)
683                                 return -EINVAL;
684                         hdr->address = addrdir;
685                         hdr->mode = PMU_I2C_MODE_SIMPLE;
686                         break;
687                 case pmac_i2c_mode_stdsub:
688                 case pmac_i2c_mode_combined:
689                         if (subsize != 1)
690                                 return -EINVAL;
691                         hdr->address = addrdir & 0xfe;
692                         hdr->comb_addr = addrdir;
693                         hdr->sub_addr = subaddr;
694                         if (bus->mode == pmac_i2c_mode_stdsub)
695                                 hdr->mode = PMU_I2C_MODE_STDSUB;
696                         else
697                                 hdr->mode = PMU_I2C_MODE_COMBINED;
698                         break;
699                 default:
700                         return -EINVAL;
701                 }
702
703                 INIT_COMPLETION(comp);
704                 req->data[0] = PMU_I2C_CMD;
705                 req->reply[0] = 0xff;
706                 req->nbytes = sizeof(struct pmu_i2c_hdr) + 1;
707                 req->done = pmu_i2c_complete;
708                 req->arg = &comp;
709                 if (!read && len) {
710                         memcpy(hdr->data, data, len);
711                         req->nbytes += len;
712                 }
713                 rc = pmu_queue_request(req);
714                 if (rc)
715                         return rc;
716                 wait_for_completion(&comp);
717                 if (req->reply[0] == PMU_I2C_STATUS_OK)
718                         break;
719                 msleep(15);
720         }
721         if (req->reply[0] != PMU_I2C_STATUS_OK)
722                 return -EIO;
723
724         for (retry = 0; retry < 16; retry++) {
725                 memset(req, 0, sizeof(struct adb_request));
726
727                 /* I know that looks like a lot, slow as hell, but darwin
728                  * does it so let's be on the safe side for now
729                  */
730                 msleep(15);
731
732                 hdr->bus = PMU_I2C_BUS_STATUS;
733
734                 INIT_COMPLETION(comp);
735                 req->data[0] = PMU_I2C_CMD;
736                 req->reply[0] = 0xff;
737                 req->nbytes = 2;
738                 req->done = pmu_i2c_complete;
739                 req->arg = &comp;
740                 rc = pmu_queue_request(req);
741                 if (rc)
742                         return rc;
743                 wait_for_completion(&comp);
744
745                 if (req->reply[0] == PMU_I2C_STATUS_OK && !read)
746                         return 0;
747                 if (req->reply[0] == PMU_I2C_STATUS_DATAREAD && read) {
748                         int rlen = req->reply_len - 1;
749
750                         if (rlen != len) {
751                                 printk(KERN_WARNING "low_i2c: PMU returned %d"
752                                        " bytes, expected %d !\n", rlen, len);
753                                 return -EIO;
754                         }
755                         if (len)
756                                 memcpy(data, &req->reply[1], len);
757                         return 0;
758                 }
759         }
760         return -EIO;
761 }
762
763 static void __init pmu_i2c_probe(void)
764 {
765         struct pmac_i2c_bus *bus;
766         struct device_node *busnode;
767         int channel, sz;
768
769         if (!pmu_present())
770                 return;
771
772         /* There might or might not be a "pmu-i2c" node, we use that
773          * or via-pmu itself, whatever we find. I haven't seen a machine
774          * with separate bus nodes, so we assume a multibus setup
775          */
776         busnode = of_find_node_by_name(NULL, "pmu-i2c");
777         if (busnode == NULL)
778                 busnode = of_find_node_by_name(NULL, "via-pmu");
779         if (busnode == NULL)
780                 return;
781
782         printk(KERN_INFO "PMU i2c %s\n", busnode->full_name);
783
784         /*
785          * We add bus 1 and 2 only for now, bus 0 is "special"
786          */
787         for (channel = 1; channel <= 2; channel++) {
788                 sz = sizeof(struct pmac_i2c_bus) + sizeof(struct adb_request);
789                 bus = kzalloc(sz, GFP_KERNEL);
790                 if (bus == NULL)
791                         return;
792
793                 bus->controller = busnode;
794                 bus->busnode = busnode;
795                 bus->type = pmac_i2c_bus_pmu;
796                 bus->channel = channel;
797                 bus->mode = pmac_i2c_mode_std;
798                 bus->hostdata = bus + 1;
799                 bus->xfer = pmu_i2c_xfer;
800                 mutex_init(&bus->mutex);
801                 bus->flags = pmac_i2c_multibus;
802                 list_add(&bus->link, &pmac_i2c_busses);
803
804                 printk(KERN_INFO " channel %d bus <multibus>\n", channel);
805         }
806 }
807
808 #endif /* CONFIG_ADB_PMU */
809
810
811 /*
812  *
813  * SMU implementation
814  *
815  */
816
817 #ifdef CONFIG_PMAC_SMU
818
819 static void smu_i2c_complete(struct smu_i2c_cmd *cmd, void *misc)
820 {
821         complete(misc);
822 }
823
824 static int smu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
825                         u32 subaddr, u8 *data, int len)
826 {
827         struct smu_i2c_cmd *cmd = bus->hostdata;
828         struct completion comp;
829         int read = addrdir & 1;
830         int rc = 0;
831
832         if ((read && len > SMU_I2C_READ_MAX) ||
833             ((!read) && len > SMU_I2C_WRITE_MAX))
834                 return -EINVAL;
835
836         memset(cmd, 0, sizeof(struct smu_i2c_cmd));
837         cmd->info.bus = bus->channel;
838         cmd->info.devaddr = addrdir;
839         cmd->info.datalen = len;
840
841         switch(bus->mode) {
842         case pmac_i2c_mode_std:
843                 if (subsize != 0)
844                         return -EINVAL;
845                 cmd->info.type = SMU_I2C_TRANSFER_SIMPLE;
846                 break;
847         case pmac_i2c_mode_stdsub:
848         case pmac_i2c_mode_combined:
849                 if (subsize > 3 || subsize < 1)
850                         return -EINVAL;
851                 cmd->info.sublen = subsize;
852                 /* that's big-endian only but heh ! */
853                 memcpy(&cmd->info.subaddr, ((char *)&subaddr) + (4 - subsize),
854                        subsize);
855                 if (bus->mode == pmac_i2c_mode_stdsub)
856                         cmd->info.type = SMU_I2C_TRANSFER_STDSUB;
857                 else
858                         cmd->info.type = SMU_I2C_TRANSFER_COMBINED;
859                 break;
860         default:
861                 return -EINVAL;
862         }
863         if (!read && len)
864                 memcpy(cmd->info.data, data, len);
865
866         init_completion(&comp);
867         cmd->done = smu_i2c_complete;
868         cmd->misc = &comp;
869         rc = smu_queue_i2c(cmd);
870         if (rc < 0)
871                 return rc;
872         wait_for_completion(&comp);
873         rc = cmd->status;
874
875         if (read && len)
876                 memcpy(data, cmd->info.data, len);
877         return rc < 0 ? rc : 0;
878 }
879
880 static void __init smu_i2c_probe(void)
881 {
882         struct device_node *controller, *busnode;
883         struct pmac_i2c_bus *bus;
884         const u32 *reg;
885         int sz;
886
887         if (!smu_present())
888                 return;
889
890         controller = of_find_node_by_name(NULL, "smu-i2c-control");
891         if (controller == NULL)
892                 controller = of_find_node_by_name(NULL, "smu");
893         if (controller == NULL)
894                 return;
895
896         printk(KERN_INFO "SMU i2c %s\n", controller->full_name);
897
898         /* Look for childs, note that they might not be of the right
899          * type as older device trees mix i2c busses and other thigns
900          * at the same level
901          */
902         for (busnode = NULL;
903              (busnode = of_get_next_child(controller, busnode)) != NULL;) {
904                 if (strcmp(busnode->type, "i2c") &&
905                     strcmp(busnode->type, "i2c-bus"))
906                         continue;
907                 reg = of_get_property(busnode, "reg", NULL);
908                 if (reg == NULL)
909                         continue;
910
911                 sz = sizeof(struct pmac_i2c_bus) + sizeof(struct smu_i2c_cmd);
912                 bus = kzalloc(sz, GFP_KERNEL);
913                 if (bus == NULL)
914                         return;
915
916                 bus->controller = controller;
917                 bus->busnode = of_node_get(busnode);
918                 bus->type = pmac_i2c_bus_smu;
919                 bus->channel = *reg;
920                 bus->mode = pmac_i2c_mode_std;
921                 bus->hostdata = bus + 1;
922                 bus->xfer = smu_i2c_xfer;
923                 mutex_init(&bus->mutex);
924                 bus->flags = 0;
925                 list_add(&bus->link, &pmac_i2c_busses);
926
927                 printk(KERN_INFO " channel %x bus %s\n",
928                        bus->channel, busnode->full_name);
929         }
930 }
931
932 #endif /* CONFIG_PMAC_SMU */
933
934 /*
935  *
936  * Core code
937  *
938  */
939
940
941 struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node)
942 {
943         struct device_node *p = of_node_get(node);
944         struct device_node *prev = NULL;
945         struct pmac_i2c_bus *bus;
946
947         while(p) {
948                 list_for_each_entry(bus, &pmac_i2c_busses, link) {
949                         if (p == bus->busnode) {
950                                 if (prev && bus->flags & pmac_i2c_multibus) {
951                                         const u32 *reg;
952                                         reg = of_get_property(prev, "reg",
953                                                                 NULL);
954                                         if (!reg)
955                                                 continue;
956                                         if (((*reg) >> 8) != bus->channel)
957                                                 continue;
958                                 }
959                                 of_node_put(p);
960                                 of_node_put(prev);
961                                 return bus;
962                         }
963                 }
964                 of_node_put(prev);
965                 prev = p;
966                 p = of_get_parent(p);
967         }
968         return NULL;
969 }
970 EXPORT_SYMBOL_GPL(pmac_i2c_find_bus);
971
972 u8 pmac_i2c_get_dev_addr(struct device_node *device)
973 {
974         const u32 *reg = of_get_property(device, "reg", NULL);
975
976         if (reg == NULL)
977                 return 0;
978
979         return (*reg) & 0xff;
980 }
981 EXPORT_SYMBOL_GPL(pmac_i2c_get_dev_addr);
982
983 struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus)
984 {
985         return bus->controller;
986 }
987 EXPORT_SYMBOL_GPL(pmac_i2c_get_controller);
988
989 struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus)
990 {
991         return bus->busnode;
992 }
993 EXPORT_SYMBOL_GPL(pmac_i2c_get_bus_node);
994
995 int pmac_i2c_get_type(struct pmac_i2c_bus *bus)
996 {
997         return bus->type;
998 }
999 EXPORT_SYMBOL_GPL(pmac_i2c_get_type);
1000
1001 int pmac_i2c_get_flags(struct pmac_i2c_bus *bus)
1002 {
1003         return bus->flags;
1004 }
1005 EXPORT_SYMBOL_GPL(pmac_i2c_get_flags);
1006
1007 int pmac_i2c_get_channel(struct pmac_i2c_bus *bus)
1008 {
1009         return bus->channel;
1010 }
1011 EXPORT_SYMBOL_GPL(pmac_i2c_get_channel);
1012
1013
1014 void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
1015                              struct i2c_adapter *adapter)
1016 {
1017         WARN_ON(bus->adapter != NULL);
1018         bus->adapter = adapter;
1019 }
1020 EXPORT_SYMBOL_GPL(pmac_i2c_attach_adapter);
1021
1022 void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
1023                              struct i2c_adapter *adapter)
1024 {
1025         WARN_ON(bus->adapter != adapter);
1026         bus->adapter = NULL;
1027 }
1028 EXPORT_SYMBOL_GPL(pmac_i2c_detach_adapter);
1029
1030 struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus)
1031 {
1032         return bus->adapter;
1033 }
1034 EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter);
1035
1036 struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter)
1037 {
1038         struct pmac_i2c_bus *bus;
1039
1040         list_for_each_entry(bus, &pmac_i2c_busses, link)
1041                 if (bus->adapter == adapter)
1042                         return bus;
1043         return NULL;
1044 }
1045 EXPORT_SYMBOL_GPL(pmac_i2c_adapter_to_bus);
1046
1047 int pmac_i2c_match_adapter(struct device_node *dev, struct i2c_adapter *adapter)
1048 {
1049         struct pmac_i2c_bus *bus = pmac_i2c_find_bus(dev);
1050
1051         if (bus == NULL)
1052                 return 0;
1053         return (bus->adapter == adapter);
1054 }
1055 EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter);
1056
1057 int pmac_low_i2c_lock(struct device_node *np)
1058 {
1059         struct pmac_i2c_bus *bus, *found = NULL;
1060
1061         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1062                 if (np == bus->controller) {
1063                         found = bus;
1064                         break;
1065                 }
1066         }
1067         if (!found)
1068                 return -ENODEV;
1069         return pmac_i2c_open(bus, 0);
1070 }
1071 EXPORT_SYMBOL_GPL(pmac_low_i2c_lock);
1072
1073 int pmac_low_i2c_unlock(struct device_node *np)
1074 {
1075         struct pmac_i2c_bus *bus, *found = NULL;
1076
1077         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1078                 if (np == bus->controller) {
1079                         found = bus;
1080                         break;
1081                 }
1082         }
1083         if (!found)
1084                 return -ENODEV;
1085         pmac_i2c_close(bus);
1086         return 0;
1087 }
1088 EXPORT_SYMBOL_GPL(pmac_low_i2c_unlock);
1089
1090
1091 int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled)
1092 {
1093         int rc;
1094
1095         mutex_lock(&bus->mutex);
1096         bus->polled = polled || pmac_i2c_force_poll;
1097         bus->opened = 1;
1098         bus->mode = pmac_i2c_mode_std;
1099         if (bus->open && (rc = bus->open(bus)) != 0) {
1100                 bus->opened = 0;
1101                 mutex_unlock(&bus->mutex);
1102                 return rc;
1103         }
1104         return 0;
1105 }
1106 EXPORT_SYMBOL_GPL(pmac_i2c_open);
1107
1108 void pmac_i2c_close(struct pmac_i2c_bus *bus)
1109 {
1110         WARN_ON(!bus->opened);
1111         if (bus->close)
1112                 bus->close(bus);
1113         bus->opened = 0;
1114         mutex_unlock(&bus->mutex);
1115 }
1116 EXPORT_SYMBOL_GPL(pmac_i2c_close);
1117
1118 int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode)
1119 {
1120         WARN_ON(!bus->opened);
1121
1122         /* Report me if you see the error below as there might be a new
1123          * "combined4" mode that I need to implement for the SMU bus
1124          */
1125         if (mode < pmac_i2c_mode_dumb || mode > pmac_i2c_mode_combined) {
1126                 printk(KERN_ERR "low_i2c: Invalid mode %d requested on"
1127                        " bus %s !\n", mode, bus->busnode->full_name);
1128                 return -EINVAL;
1129         }
1130         bus->mode = mode;
1131
1132         return 0;
1133 }
1134 EXPORT_SYMBOL_GPL(pmac_i2c_setmode);
1135
1136 int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
1137                   u32 subaddr, u8 *data, int len)
1138 {
1139         int rc;
1140
1141         WARN_ON(!bus->opened);
1142
1143         DBG("xfer() chan=%d, addrdir=0x%x, mode=%d, subsize=%d, subaddr=0x%x,"
1144             " %d bytes, bus %s\n", bus->channel, addrdir, bus->mode, subsize,
1145             subaddr, len, bus->busnode->full_name);
1146
1147         rc = bus->xfer(bus, addrdir, subsize, subaddr, data, len);
1148
1149 #ifdef DEBUG
1150         if (rc)
1151                 DBG("xfer error %d\n", rc);
1152 #endif
1153         return rc;
1154 }
1155 EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
1156
1157 /* some quirks for platform function decoding */
1158 enum {
1159         pmac_i2c_quirk_invmask = 0x00000001u,
1160         pmac_i2c_quirk_skip = 0x00000002u,
1161 };
1162
1163 static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
1164                                               int quirks))
1165 {
1166         struct pmac_i2c_bus *bus;
1167         struct device_node *np;
1168         static struct whitelist_ent {
1169                 char *name;
1170                 char *compatible;
1171                 int quirks;
1172         } whitelist[] = {
1173                 /* XXX Study device-tree's & apple drivers are get the quirks
1174                  * right !
1175                  */
1176                 /* Workaround: It seems that running the clockspreading
1177                  * properties on the eMac will cause lockups during boot.
1178                  * The machine seems to work fine without that. So for now,
1179                  * let's make sure i2c-hwclock doesn't match about "imic"
1180                  * clocks and we'll figure out if we really need to do
1181                  * something special about those later.
1182                  */
1183                 { "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
1184                 { "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
1185                 { "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
1186                 { "i2c-cpu-voltage", NULL, 0},
1187                 {  "temp-monitor", NULL, 0 },
1188                 {  "supply-monitor", NULL, 0 },
1189                 { NULL, NULL, 0 },
1190         };
1191
1192         /* Only some devices need to have platform functions instanciated
1193          * here. For now, we have a table. Others, like 9554 i2c GPIOs used
1194          * on Xserve, if we ever do a driver for them, will use their own
1195          * platform function instance
1196          */
1197         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1198                 for (np = NULL;
1199                      (np = of_get_next_child(bus->busnode, np)) != NULL;) {
1200                         struct whitelist_ent *p;
1201                         /* If multibus, check if device is on that bus */
1202                         if (bus->flags & pmac_i2c_multibus)
1203                                 if (bus != pmac_i2c_find_bus(np))
1204                                         continue;
1205                         for (p = whitelist; p->name != NULL; p++) {
1206                                 if (strcmp(np->name, p->name))
1207                                         continue;
1208                                 if (p->compatible &&
1209                                     !of_device_is_compatible(np, p->compatible))
1210                                         continue;
1211                                 if (p->quirks & pmac_i2c_quirk_skip)
1212                                         break;
1213                                 callback(np, p->quirks);
1214                                 break;
1215                         }
1216                 }
1217         }
1218 }
1219
1220 #define MAX_I2C_DATA    64
1221
1222 struct pmac_i2c_pf_inst
1223 {
1224         struct pmac_i2c_bus     *bus;
1225         u8                      addr;
1226         u8                      buffer[MAX_I2C_DATA];
1227         u8                      scratch[MAX_I2C_DATA];
1228         int                     bytes;
1229         int                     quirks;
1230 };
1231
1232 static void* pmac_i2c_do_begin(struct pmf_function *func, struct pmf_args *args)
1233 {
1234         struct pmac_i2c_pf_inst *inst;
1235         struct pmac_i2c_bus     *bus;
1236
1237         bus = pmac_i2c_find_bus(func->node);
1238         if (bus == NULL) {
1239                 printk(KERN_ERR "low_i2c: Can't find bus for %s (pfunc)\n",
1240                        func->node->full_name);
1241                 return NULL;
1242         }
1243         if (pmac_i2c_open(bus, 0)) {
1244                 printk(KERN_ERR "low_i2c: Can't open i2c bus for %s (pfunc)\n",
1245                        func->node->full_name);
1246                 return NULL;
1247         }
1248
1249         /* XXX might need GFP_ATOMIC when called during the suspend process,
1250          * but then, there are already lots of issues with suspending when
1251          * near OOM that need to be resolved, the allocator itself should
1252          * probably make GFP_NOIO implicit during suspend
1253          */
1254         inst = kzalloc(sizeof(struct pmac_i2c_pf_inst), GFP_KERNEL);
1255         if (inst == NULL) {
1256                 pmac_i2c_close(bus);
1257                 return NULL;
1258         }
1259         inst->bus = bus;
1260         inst->addr = pmac_i2c_get_dev_addr(func->node);
1261         inst->quirks = (int)(long)func->driver_data;
1262         return inst;
1263 }
1264
1265 static void pmac_i2c_do_end(struct pmf_function *func, void *instdata)
1266 {
1267         struct pmac_i2c_pf_inst *inst = instdata;
1268
1269         if (inst == NULL)
1270                 return;
1271         pmac_i2c_close(inst->bus);
1272         if (inst)
1273                 kfree(inst);
1274 }
1275
1276 static int pmac_i2c_do_read(PMF_STD_ARGS, u32 len)
1277 {
1278         struct pmac_i2c_pf_inst *inst = instdata;
1279
1280         inst->bytes = len;
1281         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 0, 0,
1282                              inst->buffer, len);
1283 }
1284
1285 static int pmac_i2c_do_write(PMF_STD_ARGS, u32 len, const u8 *data)
1286 {
1287         struct pmac_i2c_pf_inst *inst = instdata;
1288
1289         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0,
1290                              (u8 *)data, len);
1291 }
1292
1293 /* This function is used to do the masking & OR'ing for the "rmw" type
1294  * callbacks. Ze should apply the mask and OR in the values in the
1295  * buffer before writing back. The problem is that it seems that
1296  * various darwin drivers implement the mask/or differently, thus
1297  * we need to check the quirks first
1298  */
1299 static void pmac_i2c_do_apply_rmw(struct pmac_i2c_pf_inst *inst,
1300                                   u32 len, const u8 *mask, const u8 *val)
1301 {
1302         int i;
1303
1304         if (inst->quirks & pmac_i2c_quirk_invmask) {
1305                 for (i = 0; i < len; i ++)
1306                         inst->scratch[i] = (inst->buffer[i] & mask[i]) | val[i];
1307         } else {
1308                 for (i = 0; i < len; i ++)
1309                         inst->scratch[i] = (inst->buffer[i] & ~mask[i])
1310                                 | (val[i] & mask[i]);
1311         }
1312 }
1313
1314 static int pmac_i2c_do_rmw(PMF_STD_ARGS, u32 masklen, u32 valuelen,
1315                            u32 totallen, const u8 *maskdata,
1316                            const u8 *valuedata)
1317 {
1318         struct pmac_i2c_pf_inst *inst = instdata;
1319
1320         if (masklen > inst->bytes || valuelen > inst->bytes ||
1321             totallen > inst->bytes || valuelen > masklen)
1322                 return -EINVAL;
1323
1324         pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata);
1325
1326         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0,
1327                              inst->scratch, totallen);
1328 }
1329
1330 static int pmac_i2c_do_read_sub(PMF_STD_ARGS, u8 subaddr, u32 len)
1331 {
1332         struct pmac_i2c_pf_inst *inst = instdata;
1333
1334         inst->bytes = len;
1335         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 1, subaddr,
1336                              inst->buffer, len);
1337 }
1338
1339 static int pmac_i2c_do_write_sub(PMF_STD_ARGS, u8 subaddr, u32 len,
1340                                      const u8 *data)
1341 {
1342         struct pmac_i2c_pf_inst *inst = instdata;
1343
1344         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1,
1345                              subaddr, (u8 *)data, len);
1346 }
1347
1348 static int pmac_i2c_do_set_mode(PMF_STD_ARGS, int mode)
1349 {
1350         struct pmac_i2c_pf_inst *inst = instdata;
1351
1352         return pmac_i2c_setmode(inst->bus, mode);
1353 }
1354
1355 static int pmac_i2c_do_rmw_sub(PMF_STD_ARGS, u8 subaddr, u32 masklen,
1356                                u32 valuelen, u32 totallen, const u8 *maskdata,
1357                                const u8 *valuedata)
1358 {
1359         struct pmac_i2c_pf_inst *inst = instdata;
1360
1361         if (masklen > inst->bytes || valuelen > inst->bytes ||
1362             totallen > inst->bytes || valuelen > masklen)
1363                 return -EINVAL;
1364
1365         pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata);
1366
1367         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1,
1368                              subaddr, inst->scratch, totallen);
1369 }
1370
1371 static int pmac_i2c_do_mask_and_comp(PMF_STD_ARGS, u32 len,
1372                                      const u8 *maskdata,
1373                                      const u8 *valuedata)
1374 {
1375         struct pmac_i2c_pf_inst *inst = instdata;
1376         int i, match;
1377
1378         /* Get return value pointer, it's assumed to be a u32 */
1379         if (!args || !args->count || !args->u[0].p)
1380                 return -EINVAL;
1381
1382         /* Check buffer */
1383         if (len > inst->bytes)
1384                 return -EINVAL;
1385
1386         for (i = 0, match = 1; match && i < len; i ++)
1387                 if ((inst->buffer[i] & maskdata[i]) != valuedata[i])
1388                         match = 0;
1389         *args->u[0].p = match;
1390         return 0;
1391 }
1392
1393 static int pmac_i2c_do_delay(PMF_STD_ARGS, u32 duration)
1394 {
1395         msleep((duration + 999) / 1000);
1396         return 0;
1397 }
1398
1399
1400 static struct pmf_handlers pmac_i2c_pfunc_handlers = {
1401         .begin                  = pmac_i2c_do_begin,
1402         .end                    = pmac_i2c_do_end,
1403         .read_i2c               = pmac_i2c_do_read,
1404         .write_i2c              = pmac_i2c_do_write,
1405         .rmw_i2c                = pmac_i2c_do_rmw,
1406         .read_i2c_sub           = pmac_i2c_do_read_sub,
1407         .write_i2c_sub          = pmac_i2c_do_write_sub,
1408         .rmw_i2c_sub            = pmac_i2c_do_rmw_sub,
1409         .set_i2c_mode           = pmac_i2c_do_set_mode,
1410         .mask_and_compare       = pmac_i2c_do_mask_and_comp,
1411         .delay                  = pmac_i2c_do_delay,
1412 };
1413
1414 static void __init pmac_i2c_dev_create(struct device_node *np, int quirks)
1415 {
1416         DBG("dev_create(%s)\n", np->full_name);
1417
1418         pmf_register_driver(np, &pmac_i2c_pfunc_handlers,
1419                             (void *)(long)quirks);
1420 }
1421
1422 static void __init pmac_i2c_dev_init(struct device_node *np, int quirks)
1423 {
1424         DBG("dev_create(%s)\n", np->full_name);
1425
1426         pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_INIT, NULL);
1427 }
1428
1429 static void pmac_i2c_dev_suspend(struct device_node *np, int quirks)
1430 {
1431         DBG("dev_suspend(%s)\n", np->full_name);
1432         pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_SLEEP, NULL);
1433 }
1434
1435 static void pmac_i2c_dev_resume(struct device_node *np, int quirks)
1436 {
1437         DBG("dev_resume(%s)\n", np->full_name);
1438         pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_WAKE, NULL);
1439 }
1440
1441 void pmac_pfunc_i2c_suspend(void)
1442 {
1443         pmac_i2c_devscan(pmac_i2c_dev_suspend);
1444 }
1445
1446 void pmac_pfunc_i2c_resume(void)
1447 {
1448         pmac_i2c_devscan(pmac_i2c_dev_resume);
1449 }
1450
1451 /*
1452  * Initialize us: probe all i2c busses on the machine, instantiate
1453  * busses and platform functions as needed.
1454  */
1455 /* This is non-static as it might be called early by smp code */
1456 int __init pmac_i2c_init(void)
1457 {
1458         static int i2c_inited;
1459
1460         if (i2c_inited)
1461                 return 0;
1462         i2c_inited = 1;
1463
1464         /* Probe keywest-i2c busses */
1465         kw_i2c_probe();
1466
1467 #ifdef CONFIG_ADB_PMU
1468         /* Probe PMU i2c busses */
1469         pmu_i2c_probe();
1470 #endif
1471
1472 #ifdef CONFIG_PMAC_SMU
1473         /* Probe SMU i2c busses */
1474         smu_i2c_probe();
1475 #endif
1476
1477         /* Now add plaform functions for some known devices */
1478         pmac_i2c_devscan(pmac_i2c_dev_create);
1479
1480         return 0;
1481 }
1482 machine_arch_initcall(powermac, pmac_i2c_init);
1483
1484 /* Since pmac_i2c_init can be called too early for the platform device
1485  * registration, we need to do it at a later time. In our case, subsys
1486  * happens to fit well, though I agree it's a bit of a hack...
1487  */
1488 static int __init pmac_i2c_create_platform_devices(void)
1489 {
1490         struct pmac_i2c_bus *bus;
1491         int i = 0;
1492
1493         /* In the case where we are initialized from smp_init(), we must
1494          * not use the timer (and thus the irq). It's safe from now on
1495          * though
1496          */
1497         pmac_i2c_force_poll = 0;
1498
1499         /* Create platform devices */
1500         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1501                 bus->platform_dev =
1502                         platform_device_alloc("i2c-powermac", i++);
1503                 if (bus->platform_dev == NULL)
1504                         return -ENOMEM;
1505                 bus->platform_dev->dev.platform_data = bus;
1506                 platform_device_add(bus->platform_dev);
1507         }
1508
1509         /* Now call platform "init" functions */
1510         pmac_i2c_devscan(pmac_i2c_dev_init);
1511
1512         return 0;
1513 }
1514 machine_subsys_initcall(powermac, pmac_i2c_create_platform_devices);