1 # Helper to resolve issues with configs that have SPI enabled but I2C
2 # modular, meaning we can't build the codec driver in with I2C support.
3 # We use an ordered list of conditional defaults to pick the appropriate
4 # setting - SPI can't be modular so that case doesn't need to be covered.
5 config SND_SOC_I2C_AND_SPI
9 default y if SPI_MASTER=y
11 config SND_SOC_ALL_CODECS
12 tristate "Build all ASoC CODEC drivers"
14 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
15 select SND_SOC_AD1980 if SND_SOC_AC97_BUS
16 select SND_SOC_AD73311 if I2C
17 select SND_SOC_AK4535 if I2C
18 select SND_SOC_CS4270 if I2C
19 select SND_SOC_PCM3008
20 select SND_SOC_SSM2602 if I2C
21 select SND_SOC_TLV320AIC23 if I2C
22 select SND_SOC_TLV320AIC26 if SPI_MASTER
23 select SND_SOC_TLV320AIC3X if I2C
24 select SND_SOC_TWL4030 if TWL4030_CORE
25 select SND_SOC_UDA134X
26 select SND_SOC_UDA1380 if I2C
27 select SND_SOC_WM8350 if MFD_WM8350
28 select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
29 select SND_SOC_WM8580 if I2C
30 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
31 select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
32 select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
33 select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
34 select SND_SOC_WM8900 if I2C
35 select SND_SOC_WM8903 if I2C
36 select SND_SOC_WM8971 if I2C
37 select SND_SOC_WM8990 if I2C
38 select SND_SOC_WM9705 if SND_SOC_AC97_BUS
39 select SND_SOC_WM9712 if SND_SOC_AC97_BUS
40 select SND_SOC_WM9713 if SND_SOC_AC97_BUS
42 Normally ASoC codec drivers are only built if a machine driver which
43 uses them is also built since they are only usable with a machine
44 driver. Selecting this option will allow these drivers to be built
45 without an explicit machine driver for test and development purposes.
47 Support for the bus types used to access the codecs to be built must
48 be selected separately.
53 config SND_SOC_AC97_CODEC
60 config SND_SOC_AD73311
66 # Cirrus Logic CS4270 Codec
70 # Cirrus Logic CS4270 Codec VD = 3.3V Errata
71 # Select if you are affected by the errata where the part will not function
72 # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
73 # not select any sample rates that require MCLK to be divided by 1.5.
74 config SND_SOC_CS4270_VD33_ERRATA
76 depends on SND_SOC_CS4270
81 config SND_SOC_PCM3008
84 config SND_SOC_SSM2602
87 config SND_SOC_TLV320AIC23
90 config SND_SOC_TLV320AIC26
91 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
94 config SND_SOC_TLV320AIC3X
97 config SND_SOC_TWL4030
100 config SND_SOC_UDA134X
103 config SND_SOC_UDA1380
106 config SND_SOC_WM8350
109 config SND_SOC_WM8510
112 config SND_SOC_WM8580
115 config SND_SOC_WM8728
118 config SND_SOC_WM8731
121 config SND_SOC_WM8750
124 config SND_SOC_WM8753
127 config SND_SOC_WM8900
130 config SND_SOC_WM8903
133 config SND_SOC_WM8971
136 config SND_SOC_WM8990
139 config SND_SOC_WM9705
142 config SND_SOC_WM9712
145 config SND_SOC_WM9713