MMC: Fix S3C24XX IRQ enable during PIO transfers
[linux-2.6] / drivers / mmc / host / ricoh_mmc.c
1 /*
2  *  ricoh_mmc.c - Dummy driver to disable the Rioch MMC controller.
3  *
4  *  Copyright (C) 2007 Philip Langdale, All Rights Reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or (at
9  * your option) any later version.
10  */
11
12 /*
13  * This is a conceptually ridiculous driver, but it is required by the way
14  * the Ricoh multi-function R5C832 works. This chip implements firewire
15  * and four different memory card controllers. Two of those controllers are
16  * an SDHCI controller and a proprietary MMC controller. The linux SDHCI
17  * driver supports MMC cards but the chip detects MMC cards in hardware
18  * and directs them to the MMC controller - so the SDHCI driver never sees
19  * them. To get around this, we must disable the useless MMC controller.
20  * At that point, the SDHCI controller will start seeing them. As a bonus,
21  * a detection event occurs immediately, even if the MMC card is already
22  * in the reader.
23  *
24  * The relevant registers live on the firewire function, so this is unavoidably
25  * ugly. Such is life.
26  */
27
28 #include <linux/pci.h>
29
30 #define DRIVER_NAME "ricoh-mmc"
31
32 static const struct pci_device_id pci_ids[] __devinitdata = {
33         {
34                 .vendor         = PCI_VENDOR_ID_RICOH,
35                 .device         = PCI_DEVICE_ID_RICOH_R5C843,
36                 .subvendor      = PCI_ANY_ID,
37                 .subdevice      = PCI_ANY_ID,
38         },
39         { /* end: all zeroes */ },
40 };
41
42 MODULE_DEVICE_TABLE(pci, pci_ids);
43
44 static int ricoh_mmc_disable(struct pci_dev *fw_dev)
45 {
46         u8 write_enable;
47         u8 write_target;
48         u8 disable;
49
50         if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) {
51                 /* via RL5C476 */
52
53                 pci_read_config_byte(fw_dev, 0xB7, &disable);
54                 if (disable & 0x02) {
55                         printk(KERN_INFO DRIVER_NAME
56                                 ": Controller already disabled. " \
57                                 "Nothing to do.\n");
58                         return -ENODEV;
59                 }
60
61                 pci_read_config_byte(fw_dev, 0x8E, &write_enable);
62                 pci_write_config_byte(fw_dev, 0x8E, 0xAA);
63                 pci_read_config_byte(fw_dev, 0x8D, &write_target);
64                 pci_write_config_byte(fw_dev, 0x8D, 0xB7);
65                 pci_write_config_byte(fw_dev, 0xB7, disable | 0x02);
66                 pci_write_config_byte(fw_dev, 0x8E, write_enable);
67                 pci_write_config_byte(fw_dev, 0x8D, write_target);
68         } else {
69                 /* via R5C832 */
70
71                 pci_read_config_byte(fw_dev, 0xCB, &disable);
72                 if (disable & 0x02) {
73                         printk(KERN_INFO DRIVER_NAME
74                                ": Controller already disabled. " \
75                                 "Nothing to do.\n");
76                         return -ENODEV;
77                 }
78
79                 pci_read_config_byte(fw_dev, 0xCA, &write_enable);
80                 pci_write_config_byte(fw_dev, 0xCA, 0x57);
81                 pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
82                 pci_write_config_byte(fw_dev, 0xCA, write_enable);
83         }
84
85         printk(KERN_INFO DRIVER_NAME
86                ": Controller is now disabled.\n");
87
88         return 0;
89 }
90
91 static int ricoh_mmc_enable(struct pci_dev *fw_dev)
92 {
93         u8 write_enable;
94         u8 write_target;
95         u8 disable;
96
97         if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) {
98                 /* via RL5C476 */
99
100                 pci_read_config_byte(fw_dev, 0x8E, &write_enable);
101                 pci_write_config_byte(fw_dev, 0x8E, 0xAA);
102                 pci_read_config_byte(fw_dev, 0x8D, &write_target);
103                 pci_write_config_byte(fw_dev, 0x8D, 0xB7);
104                 pci_read_config_byte(fw_dev, 0xB7, &disable);
105                 pci_write_config_byte(fw_dev, 0xB7, disable & ~0x02);
106                 pci_write_config_byte(fw_dev, 0x8E, write_enable);
107                 pci_write_config_byte(fw_dev, 0x8D, write_target);
108         } else {
109                 /* via R5C832 */
110
111                 pci_read_config_byte(fw_dev, 0xCA, &write_enable);
112                 pci_read_config_byte(fw_dev, 0xCB, &disable);
113                 pci_write_config_byte(fw_dev, 0xCA, 0x57);
114                 pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
115                 pci_write_config_byte(fw_dev, 0xCA, write_enable);
116         }
117
118         printk(KERN_INFO DRIVER_NAME
119                ": Controller is now re-enabled.\n");
120
121         return 0;
122 }
123
124 static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
125                                      const struct pci_device_id *ent)
126 {
127         u8 rev;
128         u8 ctrlfound = 0;
129
130         struct pci_dev *fw_dev = NULL;
131
132         BUG_ON(pdev == NULL);
133         BUG_ON(ent == NULL);
134
135         pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
136
137         printk(KERN_INFO DRIVER_NAME
138                 ": Ricoh MMC controller found at %s [%04x:%04x] (rev %x)\n",
139                 pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
140                 (int)rev);
141
142         while ((fw_dev =
143                 pci_get_device(PCI_VENDOR_ID_RICOH,
144                         PCI_DEVICE_ID_RICOH_RL5C476, fw_dev))) {
145                 if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
146                     pdev->bus == fw_dev->bus) {
147                         if (ricoh_mmc_disable(fw_dev) != 0)
148                                 return -ENODEV;
149
150                         pci_set_drvdata(pdev, fw_dev);
151
152                         ++ctrlfound;
153                         break;
154                 }
155         }
156
157         fw_dev = NULL;
158
159         while (!ctrlfound &&
160             (fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH,
161                                         PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
162                 if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
163                     pdev->bus == fw_dev->bus) {
164                         if (ricoh_mmc_disable(fw_dev) != 0)
165                                 return -ENODEV;
166
167                         pci_set_drvdata(pdev, fw_dev);
168
169                         ++ctrlfound;
170                 }
171         }
172
173         if (!ctrlfound) {
174                 printk(KERN_WARNING DRIVER_NAME
175                        ": Main firewire function not found. Cannot disable controller.\n");
176                 return -ENODEV;
177         }
178
179         return 0;
180 }
181
182 static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
183 {
184         struct pci_dev *fw_dev = NULL;
185
186         fw_dev = pci_get_drvdata(pdev);
187         BUG_ON(fw_dev == NULL);
188
189         ricoh_mmc_enable(fw_dev);
190
191         pci_set_drvdata(pdev, NULL);
192 }
193
194 static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
195 {
196         struct pci_dev *fw_dev = NULL;
197
198         fw_dev = pci_get_drvdata(pdev);
199         BUG_ON(fw_dev == NULL);
200
201         printk(KERN_INFO DRIVER_NAME ": Suspending.\n");
202
203         ricoh_mmc_enable(fw_dev);
204
205         return 0;
206 }
207
208 static int ricoh_mmc_resume(struct pci_dev *pdev)
209 {
210         struct pci_dev *fw_dev = NULL;
211
212         fw_dev = pci_get_drvdata(pdev);
213         BUG_ON(fw_dev == NULL);
214
215         printk(KERN_INFO DRIVER_NAME ": Resuming.\n");
216
217         ricoh_mmc_disable(fw_dev);
218
219         return 0;
220 }
221
222 static struct pci_driver ricoh_mmc_driver = {
223         .name =         DRIVER_NAME,
224         .id_table =     pci_ids,
225         .probe =        ricoh_mmc_probe,
226         .remove =       __devexit_p(ricoh_mmc_remove),
227         .suspend =      ricoh_mmc_suspend,
228         .resume =       ricoh_mmc_resume,
229 };
230
231 /*****************************************************************************\
232  *                                                                           *
233  * Driver init/exit                                                          *
234  *                                                                           *
235 \*****************************************************************************/
236
237 static int __init ricoh_mmc_drv_init(void)
238 {
239         printk(KERN_INFO DRIVER_NAME
240                 ": Ricoh MMC Controller disabling driver\n");
241         printk(KERN_INFO DRIVER_NAME ": Copyright(c) Philip Langdale\n");
242
243         return pci_register_driver(&ricoh_mmc_driver);
244 }
245
246 static void __exit ricoh_mmc_drv_exit(void)
247 {
248         pci_unregister_driver(&ricoh_mmc_driver);
249 }
250
251 module_init(ricoh_mmc_drv_init);
252 module_exit(ricoh_mmc_drv_exit);
253
254 MODULE_AUTHOR("Philip Langdale <philipl@alumni.utexas.net>");
255 MODULE_DESCRIPTION("Ricoh MMC Controller disabling driver");
256 MODULE_LICENSE("GPL");
257