git.oblomov.eu Git - linux-2.6/blob - drivers/net/e1000/e1000_ethtool.c

   1 /*******************************************************************************
   2
   3
   4   Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms of the GNU General Public License as published by the Free
   8   Software Foundation; either version 2 of the License, or (at your option)
   9   any later version.
  10
  11   This program is distributed in the hope that it will be useful, but WITHOUT
  12   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  14   more details.
  15
  16   You should have received a copy of the GNU General Public License along with
  17   this program; if not, write to the Free Software Foundation, Inc., 59
  18   Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  19
  20   The full GNU General Public License is included in this distribution in the
  21   file called LICENSE.
  22
  23   Contact Information:
  24   Linux NICS <linux.nics@intel.com>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 /* ethtool support for e1000 */
  30
  31 #include "e1000.h"
  32
  33 #include <asm/uaccess.h>
  34
  35 extern char e1000_driver_name[];
  36 extern char e1000_driver_version[];
  37
  38 extern int e1000_up(struct e1000_adapter *adapter);
  39 extern void e1000_down(struct e1000_adapter *adapter);
  40 extern void e1000_reset(struct e1000_adapter *adapter);
  41 extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
  42 extern int e1000_setup_rx_resources(struct e1000_adapter *adapter);
  43 extern int e1000_setup_tx_resources(struct e1000_adapter *adapter);
  44 extern void e1000_free_rx_resources(struct e1000_adapter *adapter);
  45 extern void e1000_free_tx_resources(struct e1000_adapter *adapter);
  46 extern void e1000_update_stats(struct e1000_adapter *adapter);
  47
  48 struct e1000_stats {
  49         char stat_string[ETH_GSTRING_LEN];
  50         int sizeof_stat;
  51         int stat_offset;
  52 };
  53
  54 #define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
  55                       offsetof(struct e1000_adapter, m)
  56 static const struct e1000_stats e1000_gstrings_stats[] = {
  57         { "rx_packets", E1000_STAT(net_stats.rx_packets) },
  58         { "tx_packets", E1000_STAT(net_stats.tx_packets) },
  59         { "rx_bytes", E1000_STAT(net_stats.rx_bytes) },
  60         { "tx_bytes", E1000_STAT(net_stats.tx_bytes) },
  61         { "rx_errors", E1000_STAT(net_stats.rx_errors) },
  62         { "tx_errors", E1000_STAT(net_stats.tx_errors) },
  63         { "rx_dropped", E1000_STAT(net_stats.rx_dropped) },
  64         { "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
  65         { "multicast", E1000_STAT(net_stats.multicast) },
  66         { "collisions", E1000_STAT(net_stats.collisions) },
  67         { "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) },
  68         { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
  69         { "rx_crc_errors", E1000_STAT(net_stats.rx_crc_errors) },
  70         { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
  71         { "rx_fifo_errors", E1000_STAT(net_stats.rx_fifo_errors) },
  72         { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
  73         { "rx_missed_errors", E1000_STAT(net_stats.rx_missed_errors) },
  74         { "tx_aborted_errors", E1000_STAT(net_stats.tx_aborted_errors) },
  75         { "tx_carrier_errors", E1000_STAT(net_stats.tx_carrier_errors) },
  76         { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
  77         { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
  78         { "tx_window_errors", E1000_STAT(net_stats.tx_window_errors) },
  79         { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
  80         { "tx_deferred_ok", E1000_STAT(stats.dc) },
  81         { "tx_single_coll_ok", E1000_STAT(stats.scc) },
  82         { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
  83         { "rx_long_length_errors", E1000_STAT(stats.roc) },
  84         { "rx_short_length_errors", E1000_STAT(stats.ruc) },
  85         { "rx_align_errors", E1000_STAT(stats.algnerrc) },
  86         { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
  87         { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
  88         { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
  89         { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
  90         { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
  91         { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
  92         { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
  93         { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
  94         { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }
  95 };
  96 #define E1000_STATS_LEN \
  97         sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats)
  98 static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
  99         "Register test  (offline)", "Eeprom test    (offline)",
 100         "Interrupt test (offline)", "Loopback test  (offline)",
 101         "Link test   (on/offline)"
 102 };
 103 #define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN
 104
 105 static int
 106 e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 107 {
 108         struct e1000_adapter *adapter = netdev_priv(netdev);
 109         struct e1000_hw *hw = &adapter->hw;
 110
 111         if(hw->media_type == e1000_media_type_copper) {
 112
 113                 ecmd->supported = (SUPPORTED_10baseT_Half |
 114                                    SUPPORTED_10baseT_Full |
 115                                    SUPPORTED_100baseT_Half |
 116                                    SUPPORTED_100baseT_Full |
 117                                    SUPPORTED_1000baseT_Full|
 118                                    SUPPORTED_Autoneg |
 119                                    SUPPORTED_TP);
 120
 121                 ecmd->advertising = ADVERTISED_TP;
 122
 123                 if(hw->autoneg == 1) {
 124                         ecmd->advertising |= ADVERTISED_Autoneg;
 125
 126                         /* the e1000 autoneg seems to match ethtool nicely */
 127
 128                         ecmd->advertising |= hw->autoneg_advertised;
 129                 }
 130
 131                 ecmd->port = PORT_TP;
 132                 ecmd->phy_address = hw->phy_addr;
 133
 134                 if(hw->mac_type == e1000_82543)
 135                         ecmd->transceiver = XCVR_EXTERNAL;
 136                 else
 137                         ecmd->transceiver = XCVR_INTERNAL;
 138
 139         } else {
 140                 ecmd->supported   = (SUPPORTED_1000baseT_Full |
 141                                      SUPPORTED_FIBRE |
 142                                      SUPPORTED_Autoneg);
 143
 144                 ecmd->advertising = (ADVERTISED_1000baseT_Full |
 145                                      ADVERTISED_FIBRE |
 146                                      ADVERTISED_Autoneg);
 147
 148                 ecmd->port = PORT_FIBRE;
 149
 150                 if(hw->mac_type >= e1000_82545)
 151                         ecmd->transceiver = XCVR_INTERNAL;
 152                 else
 153                         ecmd->transceiver = XCVR_EXTERNAL;
 154         }
 155
 156         if(netif_carrier_ok(adapter->netdev)) {
 157
 158                 e1000_get_speed_and_duplex(hw, &adapter->link_speed,
 159                                                    &adapter->link_duplex);
 160                 ecmd->speed = adapter->link_speed;
 161
 162                 /* unfortunatly FULL_DUPLEX != DUPLEX_FULL
 163                  *          and HALF_DUPLEX != DUPLEX_HALF */
 164
 165                 if(adapter->link_duplex == FULL_DUPLEX)
 166                         ecmd->duplex = DUPLEX_FULL;
 167                 else
 168                         ecmd->duplex = DUPLEX_HALF;
 169         } else {
 170                 ecmd->speed = -1;
 171                 ecmd->duplex = -1;
 172         }
 173
 174         ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
 175                          hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
 176         return 0;
 177 }
 178
 179 static int
 180 e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 181 {
 182         struct e1000_adapter *adapter = netdev_priv(netdev);
 183         struct e1000_hw *hw = &adapter->hw;
 184
 185         if(ecmd->autoneg == AUTONEG_ENABLE) {
 186                 hw->autoneg = 1;
 187                 if(hw->media_type == e1000_media_type_fiber)
 188                         hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
 189                                      ADVERTISED_FIBRE |
 190                                      ADVERTISED_Autoneg;
 191                 else
 192                         hw->autoneg_advertised = ADVERTISED_10baseT_Half |
 193                                                   ADVERTISED_10baseT_Full |
 194                                                   ADVERTISED_100baseT_Half |
 195                                                   ADVERTISED_100baseT_Full |
 196                                                   ADVERTISED_1000baseT_Full|
 197                                                   ADVERTISED_Autoneg |
 198                                                   ADVERTISED_TP;
 199                 ecmd->advertising = hw->autoneg_advertised;
 200         } else
 201                 if(e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex))
 202                         return -EINVAL;
 203
 204         /* reset the link */
 205
 206         if(netif_running(adapter->netdev)) {
 207                 e1000_down(adapter);
 208                 e1000_reset(adapter);
 209                 e1000_up(adapter);
 210         } else
 211                 e1000_reset(adapter);
 212
 213         return 0;
 214 }
 215
 216 static void
 217 e1000_get_pauseparam(struct net_device *netdev,
 218                      struct ethtool_pauseparam *pause)
 219 {
 220         struct e1000_adapter *adapter = netdev_priv(netdev);
 221         struct e1000_hw *hw = &adapter->hw;
 222
 223         pause->autoneg =
 224                 (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
 225
 226         if(hw->fc == e1000_fc_rx_pause)
 227                 pause->rx_pause = 1;
 228         else if(hw->fc == e1000_fc_tx_pause)
 229                 pause->tx_pause = 1;
 230         else if(hw->fc == e1000_fc_full) {
 231                 pause->rx_pause = 1;
 232                 pause->tx_pause = 1;
 233         }
 234 }
 235
 236 static int
 237 e1000_set_pauseparam(struct net_device *netdev,
 238                      struct ethtool_pauseparam *pause)
 239 {
 240         struct e1000_adapter *adapter = netdev_priv(netdev);
 241         struct e1000_hw *hw = &adapter->hw;
 242
 243         adapter->fc_autoneg = pause->autoneg;
 244
 245         if(pause->rx_pause && pause->tx_pause)
 246                 hw->fc = e1000_fc_full;
 247         else if(pause->rx_pause && !pause->tx_pause)
 248                 hw->fc = e1000_fc_rx_pause;
 249         else if(!pause->rx_pause && pause->tx_pause)
 250                 hw->fc = e1000_fc_tx_pause;
 251         else if(!pause->rx_pause && !pause->tx_pause)
 252                 hw->fc = e1000_fc_none;
 253
 254         hw->original_fc = hw->fc;
 255
 256         if(adapter->fc_autoneg == AUTONEG_ENABLE) {
 257                 if(netif_running(adapter->netdev)) {
 258                         e1000_down(adapter);
 259                         e1000_up(adapter);
 260                 } else
 261                         e1000_reset(adapter);
 262         }
 263         else
 264                 return ((hw->media_type == e1000_media_type_fiber) ?
 265                         e1000_setup_link(hw) : e1000_force_mac_fc(hw));
 266
 267         return 0;
 268 }
 269
 270 static uint32_t
 271 e1000_get_rx_csum(struct net_device *netdev)
 272 {
 273         struct e1000_adapter *adapter = netdev_priv(netdev);
 274         return adapter->rx_csum;
 275 }
 276
 277 static int
 278 e1000_set_rx_csum(struct net_device *netdev, uint32_t data)
 279 {
 280         struct e1000_adapter *adapter = netdev_priv(netdev);
 281         adapter->rx_csum = data;
 282
 283         if(netif_running(netdev)) {
 284                 e1000_down(adapter);
 285                 e1000_up(adapter);
 286         } else
 287                 e1000_reset(adapter);
 288         return 0;
 289 }
 290
 291 static uint32_t
 292 e1000_get_tx_csum(struct net_device *netdev)
 293 {
 294         return (netdev->features & NETIF_F_HW_CSUM) != 0;
 295 }
 296
 297 static int
 298 e1000_set_tx_csum(struct net_device *netdev, uint32_t data)
 299 {
 300         struct e1000_adapter *adapter = netdev_priv(netdev);
 301
 302         if(adapter->hw.mac_type < e1000_82543) {
 303                 if (!data)
 304                         return -EINVAL;
 305                 return 0;
 306         }
 307
 308         if (data)
 309                 netdev->features |= NETIF_F_HW_CSUM;
 310         else
 311                 netdev->features &= ~NETIF_F_HW_CSUM;
 312
 313         return 0;
 314 }
 315
 316 #ifdef NETIF_F_TSO
 317 static int
 318 e1000_set_tso(struct net_device *netdev, uint32_t data)
 319 {
 320         struct e1000_adapter *adapter = netdev_priv(netdev);
 321         if((adapter->hw.mac_type < e1000_82544) ||
 322             (adapter->hw.mac_type == e1000_82547))
 323                 return data ? -EINVAL : 0;
 324
 325         if (data)
 326                 netdev->features |= NETIF_F_TSO;
 327         else
 328                 netdev->features &= ~NETIF_F_TSO;
 329         return 0;
 330 }
 331 #endif /* NETIF_F_TSO */
 332
 333 static uint32_t
 334 e1000_get_msglevel(struct net_device *netdev)
 335 {
 336         struct e1000_adapter *adapter = netdev_priv(netdev);
 337         return adapter->msg_enable;
 338 }
 339
 340 static void
 341 e1000_set_msglevel(struct net_device *netdev, uint32_t data)
 342 {
 343         struct e1000_adapter *adapter = netdev_priv(netdev);
 344         adapter->msg_enable = data;
 345 }
 346
 347 static int
 348 e1000_get_regs_len(struct net_device *netdev)
 349 {
 350 #define E1000_REGS_LEN 32
 351         return E1000_REGS_LEN * sizeof(uint32_t);
 352 }
 353
 354 static void
 355 e1000_get_regs(struct net_device *netdev,
 356                struct ethtool_regs *regs, void *p)
 357 {
 358         struct e1000_adapter *adapter = netdev_priv(netdev);
 359         struct e1000_hw *hw = &adapter->hw;
 360         uint32_t *regs_buff = p;
 361         uint16_t phy_data;
 362
 363         memset(p, 0, E1000_REGS_LEN * sizeof(uint32_t));
 364
 365         regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
 366
 367         regs_buff[0]  = E1000_READ_REG(hw, CTRL);
 368         regs_buff[1]  = E1000_READ_REG(hw, STATUS);
 369
 370         regs_buff[2]  = E1000_READ_REG(hw, RCTL);
 371         regs_buff[3]  = E1000_READ_REG(hw, RDLEN);
 372         regs_buff[4]  = E1000_READ_REG(hw, RDH);
 373         regs_buff[5]  = E1000_READ_REG(hw, RDT);
 374         regs_buff[6]  = E1000_READ_REG(hw, RDTR);
 375
 376         regs_buff[7]  = E1000_READ_REG(hw, TCTL);
 377         regs_buff[8]  = E1000_READ_REG(hw, TDLEN);
 378         regs_buff[9]  = E1000_READ_REG(hw, TDH);
 379         regs_buff[10] = E1000_READ_REG(hw, TDT);
 380         regs_buff[11] = E1000_READ_REG(hw, TIDV);
 381
 382         regs_buff[12] = adapter->hw.phy_type;  /* PHY type (IGP=1, M88=0) */
 383         if(hw->phy_type == e1000_phy_igp) {
 384                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 385                                     IGP01E1000_PHY_AGC_A);
 386                 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
 387                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 388                 regs_buff[13] = (uint32_t)phy_data; /* cable length */
 389                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 390                                     IGP01E1000_PHY_AGC_B);
 391                 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
 392                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 393                 regs_buff[14] = (uint32_t)phy_data; /* cable length */
 394                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 395                                     IGP01E1000_PHY_AGC_C);
 396                 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
 397                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 398                 regs_buff[15] = (uint32_t)phy_data; /* cable length */
 399                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 400                                     IGP01E1000_PHY_AGC_D);
 401                 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
 402                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 403                 regs_buff[16] = (uint32_t)phy_data; /* cable length */
 404                 regs_buff[17] = 0; /* extended 10bt distance (not needed) */
 405                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
 406                 e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
 407                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 408                 regs_buff[18] = (uint32_t)phy_data; /* cable polarity */
 409                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 410                                     IGP01E1000_PHY_PCS_INIT_REG);
 411                 e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
 412                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 413                 regs_buff[19] = (uint32_t)phy_data; /* cable polarity */
 414                 regs_buff[20] = 0; /* polarity correction enabled (always) */
 415                 regs_buff[22] = 0; /* phy receive errors (unavailable) */
 416                 regs_buff[23] = regs_buff[18]; /* mdix mode */
 417                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
 418         } else {
 419                 e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 420                 regs_buff[13] = (uint32_t)phy_data; /* cable length */
 421                 regs_buff[14] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 422                 regs_buff[15] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 423                 regs_buff[16] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 424                 e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
 425                 regs_buff[17] = (uint32_t)phy_data; /* extended 10bt distance */
 426                 regs_buff[18] = regs_buff[13]; /* cable polarity */
 427                 regs_buff[19] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 428                 regs_buff[20] = regs_buff[17]; /* polarity correction */
 429                 /* phy receive errors */
 430                 regs_buff[22] = adapter->phy_stats.receive_errors;
 431                 regs_buff[23] = regs_buff[13]; /* mdix mode */
 432         }
 433         regs_buff[21] = adapter->phy_stats.idle_errors;  /* phy idle errors */
 434         e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
 435         regs_buff[24] = (uint32_t)phy_data;  /* phy local receiver status */
 436         regs_buff[25] = regs_buff[24];  /* phy remote receiver status */
 437         if(hw->mac_type >= e1000_82540 &&
 438            hw->media_type == e1000_media_type_copper) {
 439                 regs_buff[26] = E1000_READ_REG(hw, MANC);
 440         }
 441 }
 442
 443 static int
 444 e1000_get_eeprom_len(struct net_device *netdev)
 445 {
 446         struct e1000_adapter *adapter = netdev_priv(netdev);
 447         return adapter->hw.eeprom.word_size * 2;
 448 }
 449
 450 static int
 451 e1000_get_eeprom(struct net_device *netdev,
 452                       struct ethtool_eeprom *eeprom, uint8_t *bytes)
 453 {
 454         struct e1000_adapter *adapter = netdev_priv(netdev);
 455         struct e1000_hw *hw = &adapter->hw;
 456         uint16_t *eeprom_buff;
 457         int first_word, last_word;
 458         int ret_val = 0;
 459         uint16_t i;
 460
 461         if(eeprom->len == 0)
 462                 return -EINVAL;
 463
 464         eeprom->magic = hw->vendor_id | (hw->device_id << 16);
 465
 466         first_word = eeprom->offset >> 1;
 467         last_word = (eeprom->offset + eeprom->len - 1) >> 1;
 468
 469         eeprom_buff = kmalloc(sizeof(uint16_t) *
 470                         (last_word - first_word + 1), GFP_KERNEL);
 471         if(!eeprom_buff)
 472                 return -ENOMEM;
 473
 474         if(hw->eeprom.type == e1000_eeprom_spi)
 475                 ret_val = e1000_read_eeprom(hw, first_word,
 476                                             last_word - first_word + 1,
 477                                             eeprom_buff);
 478         else {
 479                 for (i = 0; i < last_word - first_word + 1; i++)
 480                         if((ret_val = e1000_read_eeprom(hw, first_word + i, 1,
 481                                                         &eeprom_buff[i])))
 482                                 break;
 483         }
 484
 485         /* Device's eeprom is always little-endian, word addressable */
 486         for (i = 0; i < last_word - first_word + 1; i++)
 487                 le16_to_cpus(&eeprom_buff[i]);
 488
 489         memcpy(bytes, (uint8_t *)eeprom_buff + (eeprom->offset & 1),
 490                         eeprom->len);
 491         kfree(eeprom_buff);
 492
 493         return ret_val;
 494 }
 495
 496 static int
 497 e1000_set_eeprom(struct net_device *netdev,
 498                       struct ethtool_eeprom *eeprom, uint8_t *bytes)
 499 {
 500         struct e1000_adapter *adapter = netdev_priv(netdev);
 501         struct e1000_hw *hw = &adapter->hw;
 502         uint16_t *eeprom_buff;
 503         void *ptr;
 504         int max_len, first_word, last_word, ret_val = 0;
 505         uint16_t i;
 506
 507         if(eeprom->len == 0)
 508                 return -EOPNOTSUPP;
 509
 510         if(eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
 511                 return -EFAULT;
 512
 513         max_len = hw->eeprom.word_size * 2;
 514
 515         first_word = eeprom->offset >> 1;
 516         last_word = (eeprom->offset + eeprom->len - 1) >> 1;
 517         eeprom_buff = kmalloc(max_len, GFP_KERNEL);
 518         if(!eeprom_buff)
 519                 return -ENOMEM;
 520
 521         ptr = (void *)eeprom_buff;
 522
 523         if(eeprom->offset & 1) {
 524                 /* need read/modify/write of first changed EEPROM word */
 525                 /* only the second byte of the word is being modified */
 526                 ret_val = e1000_read_eeprom(hw, first_word, 1,
 527                                             &eeprom_buff[0]);
 528                 ptr++;
 529         }
 530         if(((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
 531                 /* need read/modify/write of last changed EEPROM word */
 532                 /* only the first byte of the word is being modified */
 533                 ret_val = e1000_read_eeprom(hw, last_word, 1,
 534                                   &eeprom_buff[last_word - first_word]);
 535         }
 536
 537         /* Device's eeprom is always little-endian, word addressable */
 538         for (i = 0; i < last_word - first_word + 1; i++)
 539                 le16_to_cpus(&eeprom_buff[i]);
 540
 541         memcpy(ptr, bytes, eeprom->len);
 542
 543         for (i = 0; i < last_word - first_word + 1; i++)
 544                 eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
 545
 546         ret_val = e1000_write_eeprom(hw, first_word,
 547                                      last_word - first_word + 1, eeprom_buff);
 548
 549         /* Update the checksum over the first part of the EEPROM if needed */
 550         if((ret_val == 0) && first_word <= EEPROM_CHECKSUM_REG)
 551                 e1000_update_eeprom_checksum(hw);
 552
 553         kfree(eeprom_buff);
 554         return ret_val;
 555 }
 556
 557 static void
 558 e1000_get_drvinfo(struct net_device *netdev,
 559                        struct ethtool_drvinfo *drvinfo)
 560 {
 561         struct e1000_adapter *adapter = netdev_priv(netdev);
 562
 563         strncpy(drvinfo->driver,  e1000_driver_name, 32);
 564         strncpy(drvinfo->version, e1000_driver_version, 32);
 565         strncpy(drvinfo->fw_version, "N/A", 32);
 566         strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
 567         drvinfo->n_stats = E1000_STATS_LEN;
 568         drvinfo->testinfo_len = E1000_TEST_LEN;
 569         drvinfo->regdump_len = e1000_get_regs_len(netdev);
 570         drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
 571 }
 572
 573 static void
 574 e1000_get_ringparam(struct net_device *netdev,
 575                     struct ethtool_ringparam *ring)
 576 {
 577         struct e1000_adapter *adapter = netdev_priv(netdev);
 578         e1000_mac_type mac_type = adapter->hw.mac_type;
 579         struct e1000_desc_ring *txdr = &adapter->tx_ring;
 580         struct e1000_desc_ring *rxdr = &adapter->rx_ring;
 581
 582         ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
 583                 E1000_MAX_82544_RXD;
 584         ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD :
 585                 E1000_MAX_82544_TXD;
 586         ring->rx_mini_max_pending = 0;
 587         ring->rx_jumbo_max_pending = 0;
 588         ring->rx_pending = rxdr->count;
 589         ring->tx_pending = txdr->count;
 590         ring->rx_mini_pending = 0;
 591         ring->rx_jumbo_pending = 0;
 592 }
 593
 594 static int
 595 e1000_set_ringparam(struct net_device *netdev,
 596                     struct ethtool_ringparam *ring)
 597 {
 598         struct e1000_adapter *adapter = netdev_priv(netdev);
 599         e1000_mac_type mac_type = adapter->hw.mac_type;
 600         struct e1000_desc_ring *txdr = &adapter->tx_ring;
 601         struct e1000_desc_ring *rxdr = &adapter->rx_ring;
 602         struct e1000_desc_ring tx_old, tx_new, rx_old, rx_new;
 603         int err;
 604
 605         tx_old = adapter->tx_ring;
 606         rx_old = adapter->rx_ring;
 607
 608         if((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
 609                 return -EINVAL;
 610
 611         if(netif_running(adapter->netdev))
 612                 e1000_down(adapter);
 613
 614         rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD);
 615         rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ?
 616                 E1000_MAX_RXD : E1000_MAX_82544_RXD));
 617         E1000_ROUNDUP(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
 618
 619         txdr->count = max(ring->tx_pending,(uint32_t)E1000_MIN_TXD);
 620         txdr->count = min(txdr->count,(uint32_t)(mac_type < e1000_82544 ?
 621                 E1000_MAX_TXD : E1000_MAX_82544_TXD));
 622         E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
 623
 624         if(netif_running(adapter->netdev)) {
 625                 /* Try to get new resources before deleting old */
 626                 if((err = e1000_setup_rx_resources(adapter)))
 627                         goto err_setup_rx;
 628                 if((err = e1000_setup_tx_resources(adapter)))
 629                         goto err_setup_tx;
 630
 631                 /* save the new, restore the old in order to free it,
 632                  * then restore the new back again */
 633
 634                 rx_new = adapter->rx_ring;
 635                 tx_new = adapter->tx_ring;
 636                 adapter->rx_ring = rx_old;
 637                 adapter->tx_ring = tx_old;
 638                 e1000_free_rx_resources(adapter);
 639                 e1000_free_tx_resources(adapter);
 640                 adapter->rx_ring = rx_new;
 641                 adapter->tx_ring = tx_new;
 642                 if((err = e1000_up(adapter)))
 643                         return err;
 644         }
 645
 646         return 0;
 647 err_setup_tx:
 648         e1000_free_rx_resources(adapter);
 649 err_setup_rx:
 650         adapter->rx_ring = rx_old;
 651         adapter->tx_ring = tx_old;
 652         e1000_up(adapter);
 653         return err;
 654 }
 655
 656 #define REG_PATTERN_TEST(R, M, W)                                              \
 657 {                                                                              \
 658         uint32_t pat, value;                                                   \
 659         uint32_t test[] =                                                      \
 660                 {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};              \
 661         for(pat = 0; pat < sizeof(test)/sizeof(test[0]); pat++) {              \
 662                 E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W));             \
 663                 value = E1000_READ_REG(&adapter->hw, R);                       \
 664                 if(value != (test[pat] & W & M)) {                             \
 665                         DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \
 666                                 "0x%08X expected 0x%08X\n",                    \
 667                                 E1000_##R, value, (test[pat] & W & M));        \
 668                         *data = (adapter->hw.mac_type < e1000_82543) ?         \
 669                                 E1000_82542_##R : E1000_##R;                   \
 670                         return 1;                                              \
 671                 }                                                              \
 672         }                                                                      \
 673 }
 674
 675 #define REG_SET_AND_CHECK(R, M, W)                                             \
 676 {                                                                              \
 677         uint32_t value;                                                        \
 678         E1000_WRITE_REG(&adapter->hw, R, W & M);                               \
 679         value = E1000_READ_REG(&adapter->hw, R);                               \
 680         if((W & M) != (value & M)) {                                          \
 681                 DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
 682                         "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \
 683                 *data = (adapter->hw.mac_type < e1000_82543) ?                 \
 684                         E1000_82542_##R : E1000_##R;                           \
 685                 return 1;                                                      \
 686         }                                                                      \
 687 }
 688
 689 static int
 690 e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 691 {
 692         uint32_t value, before, after;
 693         uint32_t i, toggle;
 694
 695         /* The status register is Read Only, so a write should fail.
 696          * Some bits that get toggled are ignored.
 697          */
 698         switch (adapter->hw.mac_type) {
 699         case e1000_82573:
 700                 toggle = 0x7FFFF033;
 701                 break;
 702         default:
 703                 toggle = 0xFFFFF833;
 704                 break;
 705         }
 706
 707         before = E1000_READ_REG(&adapter->hw, STATUS);
 708         value = (E1000_READ_REG(&adapter->hw, STATUS) & toggle);
 709         E1000_WRITE_REG(&adapter->hw, STATUS, toggle);
 710         after = E1000_READ_REG(&adapter->hw, STATUS) & toggle;
 711         if(value != after) {
 712                 DPRINTK(DRV, ERR, "failed STATUS register test got: "
 713                         "0x%08X expected: 0x%08X\n", after, value);
 714                 *data = 1;
 715                 return 1;
 716         }
 717         /* restore previous status */
 718         E1000_WRITE_REG(&adapter->hw, STATUS, before);
 719
 720         REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
 721         REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
 722         REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
 723         REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
 724         REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
 725         REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
 726         REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
 727         REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF);
 728         REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF);
 729         REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8);
 730         REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF);
 731         REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
 732         REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
 733         REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
 734
 735         REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
 736         REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0x003FFFFB);
 737         REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
 738
 739         if(adapter->hw.mac_type >= e1000_82543) {
 740
 741                 REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0xFFFFFFFF);
 742                 REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 743                 REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
 744                 REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 745                 REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
 746
 747                 for(i = 0; i < E1000_RAR_ENTRIES; i++) {
 748                         REG_PATTERN_TEST(RA + ((i << 1) << 2), 0xFFFFFFFF,
 749                                          0xFFFFFFFF);
 750                         REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
 751                                          0xFFFFFFFF);
 752                 }
 753
 754         } else {
 755
 756                 REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF);
 757                 REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF);
 758                 REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF);
 759                 REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF);
 760
 761         }
 762
 763         for(i = 0; i < E1000_MC_TBL_SIZE; i++)
 764                 REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
 765
 766         *data = 0;
 767         return 0;
 768 }
 769
 770 static int
 771 e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data)
 772 {
 773         uint16_t temp;
 774         uint16_t checksum = 0;
 775         uint16_t i;
 776
 777         *data = 0;
 778         /* Read and add up the contents of the EEPROM */
 779         for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
 780                 if((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) {
 781                         *data = 1;
 782                         break;
 783                 }
 784                 checksum += temp;
 785         }
 786
 787         /* If Checksum is not Correct return error else test passed */
 788         if((checksum != (uint16_t) EEPROM_SUM) && !(*data))
 789                 *data = 2;
 790
 791         return *data;
 792 }
 793
 794 static irqreturn_t
 795 e1000_test_intr(int irq,
 796                 void *data,
 797                 struct pt_regs *regs)
 798 {
 799         struct net_device *netdev = (struct net_device *) data;
 800         struct e1000_adapter *adapter = netdev_priv(netdev);
 801
 802         adapter->test_icr |= E1000_READ_REG(&adapter->hw, ICR);
 803
 804         return IRQ_HANDLED;
 805 }
 806
 807 static int
 808 e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 809 {
 810         struct net_device *netdev = adapter->netdev;
 811         uint32_t mask, i=0, shared_int = TRUE;
 812         uint32_t irq = adapter->pdev->irq;
 813
 814         *data = 0;
 815
 816         /* Hook up test interrupt handler just for this test */
 817         if(!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
 818                 shared_int = FALSE;
 819         } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ,
 820                               netdev->name, netdev)){
 821                 *data = 1;
 822                 return -1;
 823         }
 824
 825         /* Disable all the interrupts */
 826         E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF);
 827         msec_delay(10);
 828
 829         /* Test each interrupt */
 830         for(; i < 10; i++) {
 831
 832                 /* Interrupt to test */
 833                 mask = 1 << i;
 834
 835                 if(!shared_int) {
 836                         /* Disable the interrupt to be reported in
 837                          * the cause register and then force the same
 838                          * interrupt and see if one gets posted.  If
 839                          * an interrupt was posted to the bus, the
 840                          * test failed.
 841                          */
 842                         adapter->test_icr = 0;
 843                         E1000_WRITE_REG(&adapter->hw, IMC, mask);
 844                         E1000_WRITE_REG(&adapter->hw, ICS, mask);
 845                         msec_delay(10);
 846
 847                         if(adapter->test_icr & mask) {
 848                                 *data = 3;
 849                                 break;
 850                         }
 851                 }
 852
 853                 /* Enable the interrupt to be reported in
 854                  * the cause register and then force the same
 855                  * interrupt and see if one gets posted.  If
 856                  * an interrupt was not posted to the bus, the
 857                  * test failed.
 858                  */
 859                 adapter->test_icr = 0;
 860                 E1000_WRITE_REG(&adapter->hw, IMS, mask);
 861                 E1000_WRITE_REG(&adapter->hw, ICS, mask);
 862                 msec_delay(10);
 863
 864                 if(!(adapter->test_icr & mask)) {
 865                         *data = 4;
 866                         break;
 867                 }
 868
 869                 if(!shared_int) {
 870                         /* Disable the other interrupts to be reported in
 871                          * the cause register and then force the other
 872                          * interrupts and see if any get posted.  If
 873                          * an interrupt was posted to the bus, the
 874                          * test failed.
 875                          */
 876                         adapter->test_icr = 0;
 877                         E1000_WRITE_REG(&adapter->hw, IMC, ~mask & 0x00007FFF);
 878                         E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF);
 879                         msec_delay(10);
 880
 881                         if(adapter->test_icr) {
 882                                 *data = 5;
 883                                 break;
 884                         }
 885                 }
 886         }
 887
 888         /* Disable all the interrupts */
 889         E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF);
 890         msec_delay(10);
 891
 892         /* Unhook test interrupt handler */
 893         free_irq(irq, netdev);
 894
 895         return *data;
 896 }
 897
 898 static void
 899 e1000_free_desc_rings(struct e1000_adapter *adapter)
 900 {
 901         struct e1000_desc_ring *txdr = &adapter->test_tx_ring;
 902         struct e1000_desc_ring *rxdr = &adapter->test_rx_ring;
 903         struct pci_dev *pdev = adapter->pdev;
 904         int i;
 905
 906         if(txdr->desc && txdr->buffer_info) {
 907                 for(i = 0; i < txdr->count; i++) {
 908                         if(txdr->buffer_info[i].dma)
 909                                 pci_unmap_single(pdev, txdr->buffer_info[i].dma,
 910                                                  txdr->buffer_info[i].length,
 911                                                  PCI_DMA_TODEVICE);
 912                         if(txdr->buffer_info[i].skb)
 913                                 dev_kfree_skb(txdr->buffer_info[i].skb);
 914                 }
 915         }
 916
 917         if(rxdr->desc && rxdr->buffer_info) {
 918                 for(i = 0; i < rxdr->count; i++) {
 919                         if(rxdr->buffer_info[i].dma)
 920                                 pci_unmap_single(pdev, rxdr->buffer_info[i].dma,
 921                                                  rxdr->buffer_info[i].length,
 922                                                  PCI_DMA_FROMDEVICE);
 923                         if(rxdr->buffer_info[i].skb)
 924                                 dev_kfree_skb(rxdr->buffer_info[i].skb);
 925                 }
 926         }
 927
 928         if(txdr->desc)
 929                 pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma);
 930         if(rxdr->desc)
 931                 pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
 932
 933         if(txdr->buffer_info)
 934                 kfree(txdr->buffer_info);
 935         if(rxdr->buffer_info)
 936                 kfree(rxdr->buffer_info);
 937
 938         return;
 939 }
 940
 941 static int
 942 e1000_setup_desc_rings(struct e1000_adapter *adapter)
 943 {
 944         struct e1000_desc_ring *txdr = &adapter->test_tx_ring;
 945         struct e1000_desc_ring *rxdr = &adapter->test_rx_ring;
 946         struct pci_dev *pdev = adapter->pdev;
 947         uint32_t rctl;
 948         int size, i, ret_val;
 949
 950         /* Setup Tx descriptor ring and Tx buffers */
 951
 952         if(!txdr->count)
 953                 txdr->count = E1000_DEFAULT_TXD;
 954
 955         size = txdr->count * sizeof(struct e1000_buffer);
 956         if(!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
 957                 ret_val = 1;
 958                 goto err_nomem;
 959         }
 960         memset(txdr->buffer_info, 0, size);
 961
 962         txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
 963         E1000_ROUNDUP(txdr->size, 4096);
 964         if(!(txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma))) {
 965                 ret_val = 2;
 966                 goto err_nomem;
 967         }
 968         memset(txdr->desc, 0, txdr->size);
 969         txdr->next_to_use = txdr->next_to_clean = 0;
 970
 971         E1000_WRITE_REG(&adapter->hw, TDBAL,
 972                         ((uint64_t) txdr->dma & 0x00000000FFFFFFFF));
 973         E1000_WRITE_REG(&adapter->hw, TDBAH, ((uint64_t) txdr->dma >> 32));
 974         E1000_WRITE_REG(&adapter->hw, TDLEN,
 975                         txdr->count * sizeof(struct e1000_tx_desc));
 976         E1000_WRITE_REG(&adapter->hw, TDH, 0);
 977         E1000_WRITE_REG(&adapter->hw, TDT, 0);
 978         E1000_WRITE_REG(&adapter->hw, TCTL,
 979                         E1000_TCTL_PSP | E1000_TCTL_EN |
 980                         E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
 981                         E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
 982
 983         for(i = 0; i < txdr->count; i++) {
 984                 struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
 985                 struct sk_buff *skb;
 986                 unsigned int size = 1024;
 987
 988                 if(!(skb = alloc_skb(size, GFP_KERNEL))) {
 989                         ret_val = 3;
 990                         goto err_nomem;
 991                 }
 992                 skb_put(skb, size);
 993                 txdr->buffer_info[i].skb = skb;
 994                 txdr->buffer_info[i].length = skb->len;
 995                 txdr->buffer_info[i].dma =
 996                         pci_map_single(pdev, skb->data, skb->len,
 997                                        PCI_DMA_TODEVICE);
 998                 tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
 999                 tx_desc->lower.data = cpu_to_le32(skb->len);
1000                 tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
1001                                                    E1000_TXD_CMD_IFCS |
1002                                                    E1000_TXD_CMD_RPS);
1003                 tx_desc->upper.data = 0;
1004         }
1005
1006         /* Setup Rx descriptor ring and Rx buffers */
1007
1008         if(!rxdr->count)
1009                 rxdr->count = E1000_DEFAULT_RXD;
1010
1011         size = rxdr->count * sizeof(struct e1000_buffer);
1012         if(!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
1013                 ret_val = 4;
1014                 goto err_nomem;
1015         }
1016         memset(rxdr->buffer_info, 0, size);
1017
1018         rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
1019         if(!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) {
1020                 ret_val = 5;
1021                 goto err_nomem;
1022         }
1023         memset(rxdr->desc, 0, rxdr->size);
1024         rxdr->next_to_use = rxdr->next_to_clean = 0;
1025
1026         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1027         E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN);
1028         E1000_WRITE_REG(&adapter->hw, RDBAL,
1029                         ((uint64_t) rxdr->dma & 0xFFFFFFFF));
1030         E1000_WRITE_REG(&adapter->hw, RDBAH, ((uint64_t) rxdr->dma >> 32));
1031         E1000_WRITE_REG(&adapter->hw, RDLEN, rxdr->size);
1032         E1000_WRITE_REG(&adapter->hw, RDH, 0);
1033         E1000_WRITE_REG(&adapter->hw, RDT, 0);
1034         rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
1035                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1036                 (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
1037         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
1038
1039         for(i = 0; i < rxdr->count; i++) {
1040                 struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
1041                 struct sk_buff *skb;
1042
1043                 if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN,
1044                                 GFP_KERNEL))) {
1045                         ret_val = 6;
1046                         goto err_nomem;
1047                 }
1048                 skb_reserve(skb, NET_IP_ALIGN);
1049                 rxdr->buffer_info[i].skb = skb;
1050                 rxdr->buffer_info[i].length = E1000_RXBUFFER_2048;
1051                 rxdr->buffer_info[i].dma =
1052                         pci_map_single(pdev, skb->data, E1000_RXBUFFER_2048,
1053                                        PCI_DMA_FROMDEVICE);
1054                 rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
1055                 memset(skb->data, 0x00, skb->len);
1056         }
1057
1058         return 0;
1059
1060 err_nomem:
1061         e1000_free_desc_rings(adapter);
1062         return ret_val;
1063 }
1064
1065 static void
1066 e1000_phy_disable_receiver(struct e1000_adapter *adapter)
1067 {
1068         /* Write out to PHY registers 29 and 30 to disable the Receiver. */
1069         e1000_write_phy_reg(&adapter->hw, 29, 0x001F);
1070         e1000_write_phy_reg(&adapter->hw, 30, 0x8FFC);
1071         e1000_write_phy_reg(&adapter->hw, 29, 0x001A);
1072         e1000_write_phy_reg(&adapter->hw, 30, 0x8FF0);
1073 }
1074
1075 static void
1076 e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
1077 {
1078         uint16_t phy_reg;
1079
1080         /* Because we reset the PHY above, we need to re-force TX_CLK in the
1081          * Extended PHY Specific Control Register to 25MHz clock.  This
1082          * value defaults back to a 2.5MHz clock when the PHY is reset.
1083          */
1084         e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
1085         phy_reg |= M88E1000_EPSCR_TX_CLK_25;
1086         e1000_write_phy_reg(&adapter->hw,
1087                 M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
1088
1089         /* In addition, because of the s/w reset above, we need to enable
1090          * CRS on TX.  This must be set for both full and half duplex
1091          * operation.
1092          */
1093         e1000_read_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
1094         phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
1095         e1000_write_phy_reg(&adapter->hw,
1096                 M88E1000_PHY_SPEC_CTRL, phy_reg);
1097 }
1098
1099 static int
1100 e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
1101 {
1102         uint32_t ctrl_reg;
1103         uint16_t phy_reg;
1104
1105         /* Setup the Device Control Register for PHY loopback test. */
1106
1107         ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
1108         ctrl_reg |= (E1000_CTRL_ILOS |          /* Invert Loss-Of-Signal */
1109                      E1000_CTRL_FRCSPD |        /* Set the Force Speed Bit */
1110                      E1000_CTRL_FRCDPX |        /* Set the Force Duplex Bit */
1111                      E1000_CTRL_SPD_1000 |      /* Force Speed to 1000 */
1112                      E1000_CTRL_FD);            /* Force Duplex to FULL */
1113
1114         E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg);
1115
1116         /* Read the PHY Specific Control Register (0x10) */
1117         e1000_read_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
1118
1119         /* Clear Auto-Crossover bits in PHY Specific Control Register
1120          * (bits 6:5).
1121          */
1122         phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
1123         e1000_write_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
1124
1125         /* Perform software reset on the PHY */
1126         e1000_phy_reset(&adapter->hw);
1127
1128         /* Have to setup TX_CLK and TX_CRS after software reset */
1129         e1000_phy_reset_clk_and_crs(adapter);
1130
1131         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8100);
1132
1133         /* Wait for reset to complete. */
1134         udelay(500);
1135
1136         /* Have to setup TX_CLK and TX_CRS after software reset */
1137         e1000_phy_reset_clk_and_crs(adapter);
1138
1139         /* Write out to PHY registers 29 and 30 to disable the Receiver. */
1140         e1000_phy_disable_receiver(adapter);
1141
1142         /* Set the loopback bit in the PHY control register. */
1143         e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
1144         phy_reg |= MII_CR_LOOPBACK;
1145         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
1146
1147         /* Setup TX_CLK and TX_CRS one more time. */
1148         e1000_phy_reset_clk_and_crs(adapter);
1149
1150         /* Check Phy Configuration */
1151         e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
1152         if(phy_reg != 0x4100)
1153                  return 9;
1154
1155         e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
1156         if(phy_reg != 0x0070)
1157                 return 10;
1158
1159         e1000_read_phy_reg(&adapter->hw, 29, &phy_reg);
1160         if(phy_reg != 0x001A)
1161                 return 11;
1162
1163         return 0;
1164 }
1165
1166 static int
1167 e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
1168 {
1169         uint32_t ctrl_reg = 0;
1170         uint32_t stat_reg = 0;
1171
1172         adapter->hw.autoneg = FALSE;
1173
1174         if(adapter->hw.phy_type == e1000_phy_m88) {
1175                 /* Auto-MDI/MDIX Off */
1176                 e1000_write_phy_reg(&adapter->hw,
1177                                     M88E1000_PHY_SPEC_CTRL, 0x0808);
1178                 /* reset to update Auto-MDI/MDIX */
1179                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x9140);
1180                 /* autoneg off */
1181                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8140);
1182         }
1183         /* force 1000, set loopback */
1184         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
1185
1186         /* Now set up the MAC to the same speed/duplex as the PHY. */
1187         ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
1188         ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
1189         ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
1190                      E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
1191                      E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
1192                      E1000_CTRL_FD);     /* Force Duplex to FULL */
1193
1194         if(adapter->hw.media_type == e1000_media_type_copper &&
1195            adapter->hw.phy_type == e1000_phy_m88) {
1196                 ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
1197         } else {
1198                 /* Set the ILOS bit on the fiber Nic is half
1199                  * duplex link is detected. */
1200                 stat_reg = E1000_READ_REG(&adapter->hw, STATUS);
1201                 if((stat_reg & E1000_STATUS_FD) == 0)
1202                         ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
1203         }
1204
1205         E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg);
1206
1207         /* Disable the receiver on the PHY so when a cable is plugged in, the
1208          * PHY does not begin to autoneg when a cable is reconnected to the NIC.
1209          */
1210         if(adapter->hw.phy_type == e1000_phy_m88)
1211                 e1000_phy_disable_receiver(adapter);
1212
1213         udelay(500);
1214
1215         return 0;
1216 }
1217
1218 static int
1219 e1000_set_phy_loopback(struct e1000_adapter *adapter)
1220 {
1221         uint16_t phy_reg = 0;
1222         uint16_t count = 0;
1223
1224         switch (adapter->hw.mac_type) {
1225         case e1000_82543:
1226                 if(adapter->hw.media_type == e1000_media_type_copper) {
1227                         /* Attempt to setup Loopback mode on Non-integrated PHY.
1228                          * Some PHY registers get corrupted at random, so
1229                          * attempt this 10 times.
1230                          */
1231                         while(e1000_nonintegrated_phy_loopback(adapter) &&
1232                               count++ < 10);
1233                         if(count < 11)
1234                                 return 0;
1235                 }
1236                 break;
1237
1238         case e1000_82544:
1239         case e1000_82540:
1240         case e1000_82545:
1241         case e1000_82545_rev_3:
1242         case e1000_82546:
1243         case e1000_82546_rev_3:
1244         case e1000_82541:
1245         case e1000_82541_rev_2:
1246         case e1000_82547:
1247         case e1000_82547_rev_2:
1248         case e1000_82573:
1249                 return e1000_integrated_phy_loopback(adapter);
1250                 break;
1251
1252         default:
1253                 /* Default PHY loopback work is to read the MII
1254                  * control register and assert bit 14 (loopback mode).
1255                  */
1256                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
1257                 phy_reg |= MII_CR_LOOPBACK;
1258                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
1259                 return 0;
1260                 break;
1261         }
1262
1263         return 8;
1264 }
1265
1266 static int
1267 e1000_setup_loopback_test(struct e1000_adapter *adapter)
1268 {
1269         uint32_t rctl;
1270
1271         if(adapter->hw.media_type == e1000_media_type_fiber ||
1272            adapter->hw.media_type == e1000_media_type_internal_serdes) {
1273                 if(adapter->hw.mac_type == e1000_82545 ||
1274                    adapter->hw.mac_type == e1000_82546 ||
1275                    adapter->hw.mac_type == e1000_82545_rev_3 ||
1276                    adapter->hw.mac_type == e1000_82546_rev_3)
1277                         return e1000_set_phy_loopback(adapter);
1278                 else {
1279                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1280                         rctl |= E1000_RCTL_LBM_TCVR;
1281                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
1282                         return 0;
1283                 }
1284         } else if(adapter->hw.media_type == e1000_media_type_copper)
1285                 return e1000_set_phy_loopback(adapter);
1286
1287         return 7;
1288 }
1289
1290 static void
1291 e1000_loopback_cleanup(struct e1000_adapter *adapter)
1292 {
1293         uint32_t rctl;
1294         uint16_t phy_reg;
1295
1296         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1297         rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
1298         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
1299
1300         if(adapter->hw.media_type == e1000_media_type_copper ||
1301            ((adapter->hw.media_type == e1000_media_type_fiber ||
1302              adapter->hw.media_type == e1000_media_type_internal_serdes) &&
1303             (adapter->hw.mac_type == e1000_82545 ||
1304              adapter->hw.mac_type == e1000_82546 ||
1305              adapter->hw.mac_type == e1000_82545_rev_3 ||
1306              adapter->hw.mac_type == e1000_82546_rev_3))) {
1307                 adapter->hw.autoneg = TRUE;
1308                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
1309                 if(phy_reg & MII_CR_LOOPBACK) {
1310                         phy_reg &= ~MII_CR_LOOPBACK;
1311                         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
1312                         e1000_phy_reset(&adapter->hw);
1313                 }
1314         }
1315 }
1316
1317 static void
1318 e1000_create_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
1319 {
1320         memset(skb->data, 0xFF, frame_size);
1321         frame_size = (frame_size % 2) ? (frame_size - 1) : frame_size;
1322         memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
1323         memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
1324         memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
1325 }
1326
1327 static int
1328 e1000_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
1329 {
1330         frame_size = (frame_size % 2) ? (frame_size - 1) : frame_size;
1331         if(*(skb->data + 3) == 0xFF) {
1332                 if((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
1333                    (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
1334                         return 0;
1335                 }
1336         }
1337         return 13;
1338 }
1339
1340 static int
1341 e1000_run_loopback_test(struct e1000_adapter *adapter)
1342 {
1343         struct e1000_desc_ring *txdr = &adapter->test_tx_ring;
1344         struct e1000_desc_ring *rxdr = &adapter->test_rx_ring;
1345         struct pci_dev *pdev = adapter->pdev;
1346         int i, j, k, l, lc, good_cnt, ret_val=0;
1347         unsigned long time;
1348
1349         E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1);
1350
1351         /* Calculate the loop count based on the largest descriptor ring
1352          * The idea is to wrap the largest ring a number of times using 64
1353          * send/receive pairs during each loop
1354          */
1355
1356         if(rxdr->count <= txdr->count)
1357                 lc = ((txdr->count / 64) * 2) + 1;
1358         else
1359                 lc = ((rxdr->count / 64) * 2) + 1;
1360
1361         k = l = 0;
1362         for(j = 0; j <= lc; j++) { /* loop count loop */
1363                 for(i = 0; i < 64; i++) { /* send the packets */
1364                         e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
1365                                         1024);
1366                         pci_dma_sync_single_for_device(pdev,
1367                                         txdr->buffer_info[k].dma,
1368                                         txdr->buffer_info[k].length,
1369                                         PCI_DMA_TODEVICE);
1370                         if(unlikely(++k == txdr->count)) k = 0;
1371                 }
1372                 E1000_WRITE_REG(&adapter->hw, TDT, k);
1373                 msec_delay(200);
1374                 time = jiffies; /* set the start time for the receive */
1375                 good_cnt = 0;
1376                 do { /* receive the sent packets */
1377                         pci_dma_sync_single_for_cpu(pdev,
1378                                         rxdr->buffer_info[l].dma,
1379                                         rxdr->buffer_info[l].length,
1380                                         PCI_DMA_FROMDEVICE);
1381
1382                         ret_val = e1000_check_lbtest_frame(
1383                                         rxdr->buffer_info[l].skb,
1384                                         1024);
1385                         if(!ret_val)
1386                                 good_cnt++;
1387                         if(unlikely(++l == rxdr->count)) l = 0;
1388                         /* time + 20 msecs (200 msecs on 2.4) is more than
1389                          * enough time to complete the receives, if it's
1390                          * exceeded, break and error off
1391                          */
1392                 } while (good_cnt < 64 && jiffies < (time + 20));
1393                 if(good_cnt != 64) {
1394                         ret_val = 13; /* ret_val is the same as mis-compare */
1395                         break;
1396                 }
1397                 if(jiffies >= (time + 2)) {
1398                         ret_val = 14; /* error code for time out error */
1399                         break;
1400                 }
1401         } /* end loop count loop */
1402         return ret_val;
1403 }
1404
1405 static int
1406 e1000_loopback_test(struct e1000_adapter *adapter, uint64_t *data)
1407 {
1408         if((*data = e1000_setup_desc_rings(adapter))) goto err_loopback;
1409         if((*data = e1000_setup_loopback_test(adapter))) goto err_loopback;
1410         *data = e1000_run_loopback_test(adapter);
1411         e1000_loopback_cleanup(adapter);
1412         e1000_free_desc_rings(adapter);
1413 err_loopback:
1414         return *data;
1415 }
1416
1417 static int
1418 e1000_link_test(struct e1000_adapter *adapter, uint64_t *data)
1419 {
1420         *data = 0;
1421         if (adapter->hw.media_type == e1000_media_type_internal_serdes) {
1422                 int i = 0;
1423                 adapter->hw.serdes_link_down = TRUE;
1424
1425                 /* On some blade server designs, link establishment
1426                  * could take as long as 2-3 minutes */
1427                 do {
1428                         e1000_check_for_link(&adapter->hw);
1429                         if (adapter->hw.serdes_link_down == FALSE)
1430                                 return *data;
1431                         msec_delay(20);
1432                 } while (i++ < 3750);
1433
1434                 *data = 1;
1435         } else {
1436                 e1000_check_for_link(&adapter->hw);
1437                 if(adapter->hw.autoneg)  /* if auto_neg is set wait for it */
1438                         msec_delay(4000);
1439
1440                 if(!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) {
1441                         *data = 1;
1442                 }
1443         }
1444         return *data;
1445 }
1446
1447 static int
1448 e1000_diag_test_count(struct net_device *netdev)
1449 {
1450         return E1000_TEST_LEN;
1451 }
1452
1453 static void
1454 e1000_diag_test(struct net_device *netdev,
1455                    struct ethtool_test *eth_test, uint64_t *data)
1456 {
1457         struct e1000_adapter *adapter = netdev_priv(netdev);
1458         boolean_t if_running = netif_running(netdev);
1459
1460         if(eth_test->flags == ETH_TEST_FL_OFFLINE) {
1461                 /* Offline tests */
1462
1463                 /* save speed, duplex, autoneg settings */
1464                 uint16_t autoneg_advertised = adapter->hw.autoneg_advertised;
1465                 uint8_t forced_speed_duplex = adapter->hw.forced_speed_duplex;
1466                 uint8_t autoneg = adapter->hw.autoneg;
1467
1468                 /* Link test performed before hardware reset so autoneg doesn't
1469                  * interfere with test result */
1470                 if(e1000_link_test(adapter, &data[4]))
1471                         eth_test->flags |= ETH_TEST_FL_FAILED;
1472
1473                 if(if_running)
1474                         e1000_down(adapter);
1475                 else
1476                         e1000_reset(adapter);
1477
1478                 if(e1000_reg_test(adapter, &data[0]))
1479                         eth_test->flags |= ETH_TEST_FL_FAILED;
1480
1481                 e1000_reset(adapter);
1482                 if(e1000_eeprom_test(adapter, &data[1]))
1483                         eth_test->flags |= ETH_TEST_FL_FAILED;
1484
1485                 e1000_reset(adapter);
1486                 if(e1000_intr_test(adapter, &data[2]))
1487                         eth_test->flags |= ETH_TEST_FL_FAILED;
1488
1489                 e1000_reset(adapter);
1490                 if(e1000_loopback_test(adapter, &data[3]))
1491                         eth_test->flags |= ETH_TEST_FL_FAILED;
1492
1493                 /* restore speed, duplex, autoneg settings */
1494                 adapter->hw.autoneg_advertised = autoneg_advertised;
1495                 adapter->hw.forced_speed_duplex = forced_speed_duplex;
1496                 adapter->hw.autoneg = autoneg;
1497
1498                 e1000_reset(adapter);
1499                 if(if_running)
1500                         e1000_up(adapter);
1501         } else {
1502                 /* Online tests */
1503                 if(e1000_link_test(adapter, &data[4]))
1504                         eth_test->flags |= ETH_TEST_FL_FAILED;
1505
1506                 /* Offline tests aren't run; pass by default */
1507                 data[0] = 0;
1508                 data[1] = 0;
1509                 data[2] = 0;
1510                 data[3] = 0;
1511         }
1512 }
1513
1514 static void
1515 e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
1516 {
1517         struct e1000_adapter *adapter = netdev_priv(netdev);
1518         struct e1000_hw *hw = &adapter->hw;
1519
1520         switch(adapter->hw.device_id) {
1521         case E1000_DEV_ID_82542:
1522         case E1000_DEV_ID_82543GC_FIBER:
1523         case E1000_DEV_ID_82543GC_COPPER:
1524         case E1000_DEV_ID_82544EI_FIBER:
1525         case E1000_DEV_ID_82546EB_QUAD_COPPER:
1526         case E1000_DEV_ID_82545EM_FIBER:
1527         case E1000_DEV_ID_82545EM_COPPER:
1528                 wol->supported = 0;
1529                 wol->wolopts   = 0;
1530                 return;
1531
1532         case E1000_DEV_ID_82546EB_FIBER:
1533         case E1000_DEV_ID_82546GB_FIBER:
1534                 /* Wake events only supported on port A for dual fiber */
1535                 if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) {
1536                         wol->supported = 0;
1537                         wol->wolopts   = 0;
1538                         return;
1539                 }
1540                 /* Fall Through */
1541
1542         default:
1543                 wol->supported = WAKE_UCAST | WAKE_MCAST |
1544                                  WAKE_BCAST | WAKE_MAGIC;
1545
1546                 wol->wolopts = 0;
1547                 if(adapter->wol & E1000_WUFC_EX)
1548                         wol->wolopts |= WAKE_UCAST;
1549                 if(adapter->wol & E1000_WUFC_MC)
1550                         wol->wolopts |= WAKE_MCAST;
1551                 if(adapter->wol & E1000_WUFC_BC)
1552                         wol->wolopts |= WAKE_BCAST;
1553                 if(adapter->wol & E1000_WUFC_MAG)
1554                         wol->wolopts |= WAKE_MAGIC;
1555                 return;
1556         }
1557 }
1558
1559 static int
1560 e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
1561 {
1562         struct e1000_adapter *adapter = netdev_priv(netdev);
1563         struct e1000_hw *hw = &adapter->hw;
1564
1565         switch(adapter->hw.device_id) {
1566         case E1000_DEV_ID_82542:
1567         case E1000_DEV_ID_82543GC_FIBER:
1568         case E1000_DEV_ID_82543GC_COPPER:
1569         case E1000_DEV_ID_82544EI_FIBER:
1570         case E1000_DEV_ID_82546EB_QUAD_COPPER:
1571         case E1000_DEV_ID_82545EM_FIBER:
1572         case E1000_DEV_ID_82545EM_COPPER:
1573                 return wol->wolopts ? -EOPNOTSUPP : 0;
1574
1575         case E1000_DEV_ID_82546EB_FIBER:
1576         case E1000_DEV_ID_82546GB_FIBER:
1577                 /* Wake events only supported on port A for dual fiber */
1578                 if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
1579                         return wol->wolopts ? -EOPNOTSUPP : 0;
1580                 /* Fall Through */
1581
1582         default:
1583                 if(wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
1584                         return -EOPNOTSUPP;
1585
1586                 adapter->wol = 0;
1587
1588                 if(wol->wolopts & WAKE_UCAST)
1589                         adapter->wol |= E1000_WUFC_EX;
1590                 if(wol->wolopts & WAKE_MCAST)
1591                         adapter->wol |= E1000_WUFC_MC;
1592                 if(wol->wolopts & WAKE_BCAST)
1593                         adapter->wol |= E1000_WUFC_BC;
1594                 if(wol->wolopts & WAKE_MAGIC)
1595                         adapter->wol |= E1000_WUFC_MAG;
1596         }
1597
1598         return 0;
1599 }
1600
1601 /* toggle LED 4 times per second = 2 "blinks" per second */
1602 #define E1000_ID_INTERVAL       (HZ/4)
1603
1604 /* bit defines for adapter->led_status */
1605 #define E1000_LED_ON            0
1606
1607 static void
1608 e1000_led_blink_callback(unsigned long data)
1609 {
1610         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
1611
1612         if(test_and_change_bit(E1000_LED_ON, &adapter->led_status))
1613                 e1000_led_off(&adapter->hw);
1614         else
1615                 e1000_led_on(&adapter->hw);
1616
1617         mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
1618 }
1619
1620 static int
1621 e1000_phys_id(struct net_device *netdev, uint32_t data)
1622 {
1623         struct e1000_adapter *adapter = netdev_priv(netdev);
1624
1625         if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
1626                 data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
1627
1628         if(adapter->hw.mac_type < e1000_82573) {
1629                 if(!adapter->blink_timer.function) {
1630                         init_timer(&adapter->blink_timer);
1631                         adapter->blink_timer.function = e1000_led_blink_callback;
1632                         adapter->blink_timer.data = (unsigned long) adapter;
1633                 }
1634                 e1000_setup_led(&adapter->hw);
1635                 mod_timer(&adapter->blink_timer, jiffies);
1636                 msleep_interruptible(data * 1000);
1637                 del_timer_sync(&adapter->blink_timer);
1638         }
1639         else {
1640                 E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE |
1641                         E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |
1642                         (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
1643                         (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) |
1644                         (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT)));
1645                 msleep_interruptible(data * 1000);
1646         }
1647
1648         e1000_led_off(&adapter->hw);
1649         clear_bit(E1000_LED_ON, &adapter->led_status);
1650         e1000_cleanup_led(&adapter->hw);
1651
1652         return 0;
1653 }
1654
1655 static int
1656 e1000_nway_reset(struct net_device *netdev)
1657 {
1658         struct e1000_adapter *adapter = netdev_priv(netdev);
1659         if(netif_running(netdev)) {
1660                 e1000_down(adapter);
1661                 e1000_up(adapter);
1662         }
1663         return 0;
1664 }
1665
1666 static int
1667 e1000_get_stats_count(struct net_device *netdev)
1668 {
1669         return E1000_STATS_LEN;
1670 }
1671
1672 static void
1673 e1000_get_ethtool_stats(struct net_device *netdev,
1674                 struct ethtool_stats *stats, uint64_t *data)
1675 {
1676         struct e1000_adapter *adapter = netdev_priv(netdev);
1677         int i;
1678
1679         e1000_update_stats(adapter);
1680         for(i = 0; i < E1000_STATS_LEN; i++) {
1681                 char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
1682                 data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
1683                         sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
1684         }
1685 }
1686
1687 static void
1688 e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
1689 {
1690         int i;
1691
1692         switch(stringset) {
1693         case ETH_SS_TEST:
1694                 memcpy(data, *e1000_gstrings_test,
1695                         E1000_TEST_LEN*ETH_GSTRING_LEN);
1696                 break;
1697         case ETH_SS_STATS:
1698                 for (i=0; i < E1000_STATS_LEN; i++) {
1699                         memcpy(data + i * ETH_GSTRING_LEN,
1700                         e1000_gstrings_stats[i].stat_string,
1701                         ETH_GSTRING_LEN);
1702                 }
1703                 break;
1704         }
1705 }
1706
1707 struct ethtool_ops e1000_ethtool_ops = {
1708         .get_settings           = e1000_get_settings,
1709         .set_settings           = e1000_set_settings,
1710         .get_drvinfo            = e1000_get_drvinfo,
1711         .get_regs_len           = e1000_get_regs_len,
1712         .get_regs               = e1000_get_regs,
1713         .get_wol                = e1000_get_wol,
1714         .set_wol                = e1000_set_wol,
1715         .get_msglevel           = e1000_get_msglevel,
1716         .set_msglevel           = e1000_set_msglevel,
1717         .nway_reset             = e1000_nway_reset,
1718         .get_link               = ethtool_op_get_link,
1719         .get_eeprom_len         = e1000_get_eeprom_len,
1720         .get_eeprom             = e1000_get_eeprom,
1721         .set_eeprom             = e1000_set_eeprom,
1722         .get_ringparam          = e1000_get_ringparam,
1723         .set_ringparam          = e1000_set_ringparam,
1724         .get_pauseparam         = e1000_get_pauseparam,
1725         .set_pauseparam         = e1000_set_pauseparam,
1726         .get_rx_csum            = e1000_get_rx_csum,
1727         .set_rx_csum            = e1000_set_rx_csum,
1728         .get_tx_csum            = e1000_get_tx_csum,
1729         .set_tx_csum            = e1000_set_tx_csum,
1730         .get_sg                 = ethtool_op_get_sg,
1731         .set_sg                 = ethtool_op_set_sg,
1732 #ifdef NETIF_F_TSO
1733         .get_tso                = ethtool_op_get_tso,
1734         .set_tso                = e1000_set_tso,
1735 #endif
1736         .self_test_count        = e1000_diag_test_count,
1737         .self_test              = e1000_diag_test,
1738         .get_strings            = e1000_get_strings,
1739         .phys_id                = e1000_phys_id,
1740         .get_stats_count        = e1000_get_stats_count,
1741         .get_ethtool_stats      = e1000_get_ethtool_stats,
1742 };
1743
1744 void e1000_set_ethtool_ops(struct net_device *netdev)
1745 {
1746         SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
1747 }