[SCSI] aic7xxx: clean up eisa support
[linux-2.6] / drivers / scsi / dc395x.c
1 /*
2  * dc395x.c
3  *
4  * Device Driver for Tekram DC395(U/UW/F), DC315(U)
5  * PCI SCSI Bus Master Host Adapter
6  * (SCSI chip set used Tekram ASIC TRM-S1040)
7  *
8  * Authors:
9  *  C.L. Huang <ching@tekram.com.tw>
10  *  Erich Chen <erich@tekram.com.tw>
11  *  (C) Copyright 1995-1999 Tekram Technology Co., Ltd.
12  *
13  *  Kurt Garloff <garloff@suse.de>
14  *  (C) 1999-2000 Kurt Garloff
15  *
16  *  Oliver Neukum <oliver@neukum.name>
17  *  Ali Akcaagac <aliakc@web.de>
18  *  Jamie Lenehan <lenehan@twibble.org>
19  *  (C) 2003
20  *
21  * License: GNU GPL
22  *
23  *************************************************************************
24  *
25  * Redistribution and use in source and binary forms, with or without
26  * modification, are permitted provided that the following conditions
27  * are met:
28  * 1. Redistributions of source code must retain the above copyright
29  *    notice, this list of conditions and the following disclaimer.
30  * 2. Redistributions in binary form must reproduce the above copyright
31  *    notice, this list of conditions and the following disclaimer in the
32  *    documentation and/or other materials provided with the distribution.
33  * 3. The name of the author may not be used to endorse or promote products
34  *    derived from this software without specific prior written permission.
35  *
36  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
37  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
38  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
39  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
40  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
41  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
42  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
43  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
44  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
45  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
46  *
47  ************************************************************************
48  */
49 #include <linux/module.h>
50 #include <linux/moduleparam.h>
51 #include <linux/delay.h>
52 #include <linux/ctype.h>
53 #include <linux/blkdev.h>
54 #include <linux/interrupt.h>
55 #include <linux/init.h>
56 #include <linux/spinlock.h>
57 #include <linux/pci.h>
58 #include <linux/list.h>
59 #include <linux/vmalloc.h>
60 #include <asm/io.h>
61
62 #include <scsi/scsi.h>
63 #include <scsi/scsicam.h>       /* needed for scsicam_bios_param */
64 #include <scsi/scsi_cmnd.h>
65 #include <scsi/scsi_device.h>
66 #include <scsi/scsi_host.h>
67
68 #include "dc395x.h"
69
70 #define DC395X_NAME     "dc395x"
71 #define DC395X_BANNER   "Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040"
72 #define DC395X_VERSION  "v2.05, 2004/03/08"
73
74 /*---------------------------------------------------------------------------
75                                   Features
76  ---------------------------------------------------------------------------*/
77 /*
78  * Set to disable parts of the driver
79  */
80 /*#define DC395x_NO_DISCONNECT*/
81 /*#define DC395x_NO_TAGQ*/
82 /*#define DC395x_NO_SYNC*/
83 /*#define DC395x_NO_WIDE*/
84
85 /*---------------------------------------------------------------------------
86                                   Debugging
87  ---------------------------------------------------------------------------*/
88 /*
89  * Types of debugging that can be enabled and disabled
90  */
91 #define DBG_KG          0x0001
92 #define DBG_0           0x0002
93 #define DBG_1           0x0004
94 #define DBG_SG          0x0020
95 #define DBG_FIFO        0x0040
96 #define DBG_PIO         0x0080
97
98
99 /*
100  * Set set of things to output debugging for.
101  * Undefine to remove all debugging
102  */
103 /*#define DEBUG_MASK (DBG_0|DBG_1|DBG_SG|DBG_FIFO|DBG_PIO)*/
104 /*#define  DEBUG_MASK   DBG_0*/
105
106
107 /*
108  * Output a kernel mesage at the specified level and append the
109  * driver name and a ": " to the start of the message
110  */
111 #define dprintkl(level, format, arg...)  \
112     printk(level DC395X_NAME ": " format , ## arg)
113
114
115 #ifdef DEBUG_MASK
116 /*
117  * print a debug message - this is formated with KERN_DEBUG, then the
118  * driver name followed by a ": " and then the message is output. 
119  * This also checks that the specified debug level is enabled before
120  * outputing the message
121  */
122 #define dprintkdbg(type, format, arg...) \
123         do { \
124                 if ((type) & (DEBUG_MASK)) \
125                         dprintkl(KERN_DEBUG , format , ## arg); \
126         } while (0)
127
128 /*
129  * Check if the specified type of debugging is enabled
130  */
131 #define debug_enabled(type)     ((DEBUG_MASK) & (type))
132
133 #else
134 /*
135  * No debugging. Do nothing
136  */
137 #define dprintkdbg(type, format, arg...) \
138         do {} while (0)
139 #define debug_enabled(type)     (0)
140
141 #endif
142
143
144 #ifndef PCI_VENDOR_ID_TEKRAM
145 #define PCI_VENDOR_ID_TEKRAM                    0x1DE1  /* Vendor ID    */
146 #endif
147 #ifndef PCI_DEVICE_ID_TEKRAM_TRMS1040
148 #define PCI_DEVICE_ID_TEKRAM_TRMS1040           0x0391  /* Device ID    */
149 #endif
150
151
152 #define DC395x_LOCK_IO(dev,flags)               spin_lock_irqsave(((struct Scsi_Host *)dev)->host_lock, flags)
153 #define DC395x_UNLOCK_IO(dev,flags)             spin_unlock_irqrestore(((struct Scsi_Host *)dev)->host_lock, flags)
154
155 #define DC395x_read8(acb,address)               (u8)(inb(acb->io_port_base + (address)))
156 #define DC395x_read16(acb,address)              (u16)(inw(acb->io_port_base + (address)))
157 #define DC395x_read32(acb,address)              (u32)(inl(acb->io_port_base + (address)))
158 #define DC395x_write8(acb,address,value)        outb((value), acb->io_port_base + (address))
159 #define DC395x_write16(acb,address,value)       outw((value), acb->io_port_base + (address))
160 #define DC395x_write32(acb,address,value)       outl((value), acb->io_port_base + (address))
161
162 /* cmd->result */
163 #define RES_TARGET              0x000000FF      /* Target State */
164 #define RES_TARGET_LNX  STATUS_MASK     /* Only official ... */
165 #define RES_ENDMSG              0x0000FF00      /* End Message */
166 #define RES_DID                 0x00FF0000      /* DID_ codes */
167 #define RES_DRV                 0xFF000000      /* DRIVER_ codes */
168
169 #define MK_RES(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt))
170 #define MK_RES_LNX(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt)<<1)
171
172 #define SET_RES_TARGET(who,tgt) { who &= ~RES_TARGET; who |= (int)(tgt); }
173 #define SET_RES_TARGET_LNX(who,tgt) { who &= ~RES_TARGET_LNX; who |= (int)(tgt) << 1; }
174 #define SET_RES_MSG(who,msg) { who &= ~RES_ENDMSG; who |= (int)(msg) << 8; }
175 #define SET_RES_DID(who,did) { who &= ~RES_DID; who |= (int)(did) << 16; }
176 #define SET_RES_DRV(who,drv) { who &= ~RES_DRV; who |= (int)(drv) << 24; }
177
178 #define TAG_NONE 255
179
180 /*
181  * srb->segement_x is the hw sg list. It is always allocated as a
182  * DC395x_MAX_SG_LISTENTRY entries in a linear block which does not
183  * cross a page boundy.
184  */
185 #define SEGMENTX_LEN    (sizeof(struct SGentry)*DC395x_MAX_SG_LISTENTRY)
186 #define VIRTX_LEN       (sizeof(void *) * DC395x_MAX_SG_LISTENTRY)
187
188 struct SGentry {
189         u32 address;            /* bus! address */
190         u32 length;
191 };
192
193 /* The SEEPROM structure for TRM_S1040 */
194 struct NVRamTarget {
195         u8 cfg0;                /* Target configuration byte 0  */
196         u8 period;              /* Target period                */
197         u8 cfg2;                /* Target configuration byte 2  */
198         u8 cfg3;                /* Target configuration byte 3  */
199 };
200
201 struct NvRamType {
202         u8 sub_vendor_id[2];    /* 0,1  Sub Vendor ID   */
203         u8 sub_sys_id[2];       /* 2,3  Sub System ID   */
204         u8 sub_class;           /* 4    Sub Class       */
205         u8 vendor_id[2];        /* 5,6  Vendor ID       */
206         u8 device_id[2];        /* 7,8  Device ID       */
207         u8 reserved;            /* 9    Reserved        */
208         struct NVRamTarget target[DC395x_MAX_SCSI_ID];
209                                                 /** 10,11,12,13
210                                                  ** 14,15,16,17
211                                                  ** ....
212                                                  ** ....
213                                                  ** 70,71,72,73
214                                                  */
215         u8 scsi_id;             /* 74 Host Adapter SCSI ID      */
216         u8 channel_cfg;         /* 75 Channel configuration     */
217         u8 delay_time;          /* 76 Power on delay time       */
218         u8 max_tag;             /* 77 Maximum tags              */
219         u8 reserved0;           /* 78  */
220         u8 boot_target;         /* 79  */
221         u8 boot_lun;            /* 80  */
222         u8 reserved1;           /* 81  */
223         u16 reserved2[22];      /* 82,..125 */
224         u16 cksum;              /* 126,127 */
225 };
226
227 struct ScsiReqBlk {
228         struct list_head list;          /* next/prev ptrs for srb lists */
229         struct DeviceCtlBlk *dcb;
230         struct scsi_cmnd *cmd;
231
232         struct SGentry *segment_x;      /* Linear array of hw sg entries (up to 64 entries) */
233         u32 sg_bus_addr;                /* Bus address of sg list (ie, of segment_x) */
234
235         u8 sg_count;                    /* No of HW sg entries for this request */
236         u8 sg_index;                    /* Index of HW sg entry for this request */
237         u32 total_xfer_length;          /* Total number of bytes remaining to be transfered */
238         void **virt_map;
239         unsigned char *virt_addr;       /* Virtual address of current transfer position */
240
241         /*
242          * The sense buffer handling function, request_sense, uses
243          * the first hw sg entry (segment_x[0]) and the transfer
244          * length (total_xfer_length). While doing this it stores the
245          * original values into the last sg hw list
246          * (srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1] and the
247          * total_xfer_length in xferred. These values are restored in
248          * pci_unmap_srb_sense. This is the only place xferred is used.
249          */
250         u32 xferred;                    /* Saved copy of total_xfer_length */
251
252         u16 state;
253
254         u8 msgin_buf[6];
255         u8 msgout_buf[6];
256
257         u8 adapter_status;
258         u8 target_status;
259         u8 msg_count;
260         u8 end_message;
261
262         u8 tag_number;
263         u8 status;
264         u8 retry_count;
265         u8 flag;
266
267         u8 scsi_phase;
268 };
269
270 struct DeviceCtlBlk {
271         struct list_head list;          /* next/prev ptrs for the dcb list */
272         struct AdapterCtlBlk *acb;
273         struct list_head srb_going_list;        /* head of going srb list */
274         struct list_head srb_waiting_list;      /* head of waiting srb list */
275
276         struct ScsiReqBlk *active_srb;
277         u32 tag_mask;
278
279         u16 max_command;
280
281         u8 target_id;           /* SCSI Target ID  (SCSI Only) */
282         u8 target_lun;          /* SCSI Log.  Unit (SCSI Only) */
283         u8 identify_msg;
284         u8 dev_mode;
285
286         u8 inquiry7;            /* To store Inquiry flags */
287         u8 sync_mode;           /* 0:async mode */
288         u8 min_nego_period;     /* for nego. */
289         u8 sync_period;         /* for reg.  */
290
291         u8 sync_offset;         /* for reg. and nego.(low nibble) */
292         u8 flag;
293         u8 dev_type;
294         u8 init_tcq_flag;
295 };
296
297 struct AdapterCtlBlk {
298         struct Scsi_Host *scsi_host;
299
300         unsigned long io_port_base;
301         unsigned long io_port_len;
302
303         struct list_head dcb_list;              /* head of going dcb list */
304         struct DeviceCtlBlk *dcb_run_robin;
305         struct DeviceCtlBlk *active_dcb;
306
307         struct list_head srb_free_list;         /* head of free srb list */
308         struct ScsiReqBlk *tmp_srb;
309         struct timer_list waiting_timer;
310         struct timer_list selto_timer;
311
312         u16 srb_count;
313
314         u8 sel_timeout;
315
316         unsigned int irq_level;
317         u8 tag_max_num;
318         u8 acb_flag;
319         u8 gmode2;
320
321         u8 config;
322         u8 lun_chk;
323         u8 scan_devices;
324         u8 hostid_bit;
325
326         u8 dcb_map[DC395x_MAX_SCSI_ID];
327         struct DeviceCtlBlk *children[DC395x_MAX_SCSI_ID][32];
328
329         struct pci_dev *dev;
330
331         u8 msg_len;
332
333         struct ScsiReqBlk srb_array[DC395x_MAX_SRB_CNT];
334         struct ScsiReqBlk srb;
335
336         struct NvRamType eeprom;        /* eeprom settings for this adapter */
337 };
338
339
340 /*---------------------------------------------------------------------------
341                             Forward declarations
342  ---------------------------------------------------------------------------*/
343 static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
344                 u16 *pscsi_status);
345 static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
346                 u16 *pscsi_status);
347 static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
348                 u16 *pscsi_status);
349 static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
350                 u16 *pscsi_status);
351 static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
352                 u16 *pscsi_status);
353 static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
354                 u16 *pscsi_status);
355 static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
356                 u16 *pscsi_status);
357 static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
358                 u16 *pscsi_status);
359 static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
360                 u16 *pscsi_status);
361 static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
362                 u16 *pscsi_status);
363 static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
364                 u16 *pscsi_status);
365 static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
366                 u16 *pscsi_status);
367 static void nop0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
368                 u16 *pscsi_status);
369 static void nop1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, 
370                 u16 *pscsi_status);
371 static void set_basic_config(struct AdapterCtlBlk *acb);
372 static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
373                 struct ScsiReqBlk *srb);
374 static void reset_scsi_bus(struct AdapterCtlBlk *acb);
375 static void data_io_transfer(struct AdapterCtlBlk *acb,
376                 struct ScsiReqBlk *srb, u16 io_dir);
377 static void disconnect(struct AdapterCtlBlk *acb);
378 static void reselect(struct AdapterCtlBlk *acb);
379 static u8 start_scsi(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
380                 struct ScsiReqBlk *srb);
381 static inline void enable_msgout_abort(struct AdapterCtlBlk *acb,
382                 struct ScsiReqBlk *srb);
383 static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
384                 struct ScsiReqBlk *srb);
385 static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_code,
386                 struct scsi_cmnd *cmd, u8 force);
387 static void scsi_reset_detect(struct AdapterCtlBlk *acb);
388 static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb);
389 static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb,
390                 struct ScsiReqBlk *srb);
391 static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
392                 struct ScsiReqBlk *srb);
393 static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
394                 struct ScsiReqBlk *srb);
395 static void set_xfer_rate(struct AdapterCtlBlk *acb,
396                 struct DeviceCtlBlk *dcb);
397 static void waiting_timeout(unsigned long ptr);
398
399
400 /*---------------------------------------------------------------------------
401                                  Static Data
402  ---------------------------------------------------------------------------*/
403 static u16 current_sync_offset = 0;
404
405 static void *dc395x_scsi_phase0[] = {
406         data_out_phase0,/* phase:0 */
407         data_in_phase0, /* phase:1 */
408         command_phase0, /* phase:2 */
409         status_phase0,  /* phase:3 */
410         nop0,           /* phase:4 PH_BUS_FREE .. initial phase */
411         nop0,           /* phase:5 PH_BUS_FREE .. initial phase */
412         msgout_phase0,  /* phase:6 */
413         msgin_phase0,   /* phase:7 */
414 };
415
416 static void *dc395x_scsi_phase1[] = {
417         data_out_phase1,/* phase:0 */
418         data_in_phase1, /* phase:1 */
419         command_phase1, /* phase:2 */
420         status_phase1,  /* phase:3 */
421         nop1,           /* phase:4 PH_BUS_FREE .. initial phase */
422         nop1,           /* phase:5 PH_BUS_FREE .. initial phase */
423         msgout_phase1,  /* phase:6 */
424         msgin_phase1,   /* phase:7 */
425 };
426
427 /*
428  *Fast20:       000      50ns, 20.0 MHz
429  *              001      75ns, 13.3 MHz
430  *              010     100ns, 10.0 MHz
431  *              011     125ns,  8.0 MHz
432  *              100     150ns,  6.6 MHz
433  *              101     175ns,  5.7 MHz
434  *              110     200ns,  5.0 MHz
435  *              111     250ns,  4.0 MHz
436  *
437  *Fast40(LVDS): 000      25ns, 40.0 MHz
438  *              001      50ns, 20.0 MHz
439  *              010      75ns, 13.3 MHz
440  *              011     100ns, 10.0 MHz
441  *              100     125ns,  8.0 MHz
442  *              101     150ns,  6.6 MHz
443  *              110     175ns,  5.7 MHz
444  *              111     200ns,  5.0 MHz
445  */
446 /*static u8     clock_period[] = {12,19,25,31,37,44,50,62};*/
447
448 /* real period:48ns,76ns,100ns,124ns,148ns,176ns,200ns,248ns */
449 static u8 clock_period[] = { 12, 18, 25, 31, 37, 43, 50, 62 };
450 static u16 clock_speed[] = { 200, 133, 100, 80, 67, 58, 50, 40 };
451
452
453 /*---------------------------------------------------------------------------
454                                 Configuration
455   ---------------------------------------------------------------------------*/
456 /*
457  * Module/boot parameters currently effect *all* instances of the
458  * card in the system.
459  */
460
461 /*
462  * Command line parameters are stored in a structure below.
463  * These are the index's into the structure for the various
464  * command line options.
465  */
466 #define CFG_ADAPTER_ID          0
467 #define CFG_MAX_SPEED           1
468 #define CFG_DEV_MODE            2
469 #define CFG_ADAPTER_MODE        3
470 #define CFG_TAGS                4
471 #define CFG_RESET_DELAY         5
472
473 #define CFG_NUM                 6       /* number of configuration items */
474
475
476 /*
477  * Value used to indicate that a command line override
478  * hasn't been used to modify the value.
479  */
480 #define CFG_PARAM_UNSET -1
481
482
483 /*
484  * Hold command line parameters.
485  */
486 struct ParameterData {
487         int value;              /* value of this setting */
488         int min;                /* minimum value */
489         int max;                /* maximum value */
490         int def;                /* default value */
491         int safe;               /* safe value */
492 };
493 static struct ParameterData __devinitdata cfg_data[] = {
494         { /* adapter id */
495                 CFG_PARAM_UNSET,
496                 0,
497                 15,
498                 7,
499                 7
500         },
501         { /* max speed */
502                 CFG_PARAM_UNSET,
503                   0,
504                   7,
505                   1,    /* 13.3Mhz */
506                   4,    /*  6.7Hmz */
507         },
508         { /* dev mode */
509                 CFG_PARAM_UNSET,
510                 0,
511                 0x3f,
512                 NTC_DO_PARITY_CHK | NTC_DO_DISCONNECT | NTC_DO_SYNC_NEGO |
513                         NTC_DO_WIDE_NEGO | NTC_DO_TAG_QUEUEING |
514                         NTC_DO_SEND_START,
515                 NTC_DO_PARITY_CHK | NTC_DO_SEND_START
516         },
517         { /* adapter mode */
518                 CFG_PARAM_UNSET,
519                 0,
520                 0x2f,
521 #ifdef CONFIG_SCSI_MULTI_LUN
522                         NAC_SCANLUN |
523 #endif
524                 NAC_GT2DRIVES | NAC_GREATER_1G | NAC_POWERON_SCSI_RESET
525                         /*| NAC_ACTIVE_NEG*/,
526                 NAC_GT2DRIVES | NAC_GREATER_1G | NAC_POWERON_SCSI_RESET | 0x08
527         },
528         { /* tags */
529                 CFG_PARAM_UNSET,
530                 0,
531                 5,
532                 3,      /* 16 tags (??) */
533                 2,
534         },
535         { /* reset delay */
536                 CFG_PARAM_UNSET,
537                 0,
538                 180,
539                 1,      /* 1 second */
540                 10,     /* 10 seconds */
541         }
542 };
543
544
545 /*
546  * Safe settings. If set to zero the the BIOS/default values with
547  * command line overrides will be used. If set to 1 then safe and
548  * slow settings will be used.
549  */
550 static int use_safe_settings = 0;
551 module_param_named(safe, use_safe_settings, bool, 0);
552 MODULE_PARM_DESC(safe, "Use safe and slow settings only. Default: false");
553
554
555 module_param_named(adapter_id, cfg_data[CFG_ADAPTER_ID].value, int, 0);
556 MODULE_PARM_DESC(adapter_id, "Adapter SCSI ID. Default 7 (0-15)");
557
558 module_param_named(max_speed, cfg_data[CFG_MAX_SPEED].value, int, 0);
559 MODULE_PARM_DESC(max_speed, "Maximum bus speed. Default 1 (0-7) Speeds: 0=20, 1=13.3, 2=10, 3=8, 4=6.7, 5=5.8, 6=5, 7=4 Mhz");
560
561 module_param_named(dev_mode, cfg_data[CFG_DEV_MODE].value, int, 0);
562 MODULE_PARM_DESC(dev_mode, "Device mode.");
563
564 module_param_named(adapter_mode, cfg_data[CFG_ADAPTER_MODE].value, int, 0);
565 MODULE_PARM_DESC(adapter_mode, "Adapter mode.");
566
567 module_param_named(tags, cfg_data[CFG_TAGS].value, int, 0);
568 MODULE_PARM_DESC(tags, "Number of tags (1<<x). Default 3 (0-5)");
569
570 module_param_named(reset_delay, cfg_data[CFG_RESET_DELAY].value, int, 0);
571 MODULE_PARM_DESC(reset_delay, "Reset delay in seconds. Default 1 (0-180)");
572
573
574 /**
575  * set_safe_settings - if the use_safe_settings option is set then
576  * set all values to the safe and slow values.
577  **/
578 static void __devinit set_safe_settings(void)
579 {
580         if (use_safe_settings)
581         {
582                 int i;
583
584                 dprintkl(KERN_INFO, "Using safe settings.\n");
585                 for (i = 0; i < CFG_NUM; i++)
586                 {
587                         cfg_data[i].value = cfg_data[i].safe;
588                 }
589         }
590 }
591
592
593 /**
594  * fix_settings - reset any boot parameters which are out of range
595  * back to the default values.
596  **/
597 static void __devinit fix_settings(void)
598 {
599         int i;
600
601         dprintkdbg(DBG_1,
602                 "setup: AdapterId=%08x MaxSpeed=%08x DevMode=%08x "
603                 "AdapterMode=%08x Tags=%08x ResetDelay=%08x\n",
604                 cfg_data[CFG_ADAPTER_ID].value,
605                 cfg_data[CFG_MAX_SPEED].value,
606                 cfg_data[CFG_DEV_MODE].value,
607                 cfg_data[CFG_ADAPTER_MODE].value,
608                 cfg_data[CFG_TAGS].value,
609                 cfg_data[CFG_RESET_DELAY].value);
610         for (i = 0; i < CFG_NUM; i++)
611         {
612                 if (cfg_data[i].value < cfg_data[i].min
613                     || cfg_data[i].value > cfg_data[i].max)
614                         cfg_data[i].value = cfg_data[i].def;
615         }
616 }
617
618
619
620 /*
621  * Mapping from the eeprom delay index value (index into this array)
622  * to the the number of actual seconds that the delay should be for.
623  */
624 static char __devinitdata eeprom_index_to_delay_map[] = 
625         { 1, 3, 5, 10, 16, 30, 60, 120 };
626
627
628 /**
629  * eeprom_index_to_delay - Take the eeprom delay setting and convert it
630  * into a number of seconds.
631  *
632  * @eeprom: The eeprom structure in which we find the delay index to map.
633  **/
634 static void __devinit eeprom_index_to_delay(struct NvRamType *eeprom)
635 {
636         eeprom->delay_time = eeprom_index_to_delay_map[eeprom->delay_time];
637 }
638
639
640 /**
641  * delay_to_eeprom_index - Take a delay in seconds and return the
642  * closest eeprom index which will delay for at least that amount of
643  * seconds.
644  *
645  * @delay: The delay, in seconds, to find the eeprom index for.
646  **/
647 static int __devinit delay_to_eeprom_index(int delay)
648 {
649         u8 idx = 0;
650         while (idx < 7 && eeprom_index_to_delay_map[idx] < delay)
651                 idx++;
652         return idx;
653 }
654
655
656 /**
657  * eeprom_override - Override the eeprom settings, in the provided
658  * eeprom structure, with values that have been set on the command
659  * line.
660  *
661  * @eeprom: The eeprom data to override with command line options.
662  **/
663 static void __devinit eeprom_override(struct NvRamType *eeprom)
664 {
665         u8 id;
666
667         /* Adapter Settings */
668         if (cfg_data[CFG_ADAPTER_ID].value != CFG_PARAM_UNSET)
669                 eeprom->scsi_id = (u8)cfg_data[CFG_ADAPTER_ID].value;
670
671         if (cfg_data[CFG_ADAPTER_MODE].value != CFG_PARAM_UNSET)
672                 eeprom->channel_cfg = (u8)cfg_data[CFG_ADAPTER_MODE].value;
673
674         if (cfg_data[CFG_RESET_DELAY].value != CFG_PARAM_UNSET)
675                 eeprom->delay_time = delay_to_eeprom_index(
676                                         cfg_data[CFG_RESET_DELAY].value);
677
678         if (cfg_data[CFG_TAGS].value != CFG_PARAM_UNSET)
679                 eeprom->max_tag = (u8)cfg_data[CFG_TAGS].value;
680
681         /* Device Settings */
682         for (id = 0; id < DC395x_MAX_SCSI_ID; id++) {
683                 if (cfg_data[CFG_DEV_MODE].value != CFG_PARAM_UNSET)
684                         eeprom->target[id].cfg0 =
685                                 (u8)cfg_data[CFG_DEV_MODE].value;
686
687                 if (cfg_data[CFG_MAX_SPEED].value != CFG_PARAM_UNSET)
688                         eeprom->target[id].period =
689                                 (u8)cfg_data[CFG_MAX_SPEED].value;
690
691         }
692 }
693
694
695 /*---------------------------------------------------------------------------
696  ---------------------------------------------------------------------------*/
697
698 static unsigned int list_size(struct list_head *head)
699 {
700         unsigned int count = 0;
701         struct list_head *pos;
702         list_for_each(pos, head)
703                 count++;
704         return count;
705 }
706
707
708 static struct DeviceCtlBlk *dcb_get_next(struct list_head *head,
709                 struct DeviceCtlBlk *pos)
710 {
711         int use_next = 0;
712         struct DeviceCtlBlk* next = NULL;
713         struct DeviceCtlBlk* i;
714
715         if (list_empty(head))
716                 return NULL;
717
718         /* find supplied dcb and then select the next one */
719         list_for_each_entry(i, head, list)
720                 if (use_next) {
721                         next = i;
722                         break;
723                 } else if (i == pos) {
724                         use_next = 1;
725                 }
726         /* if no next one take the head one (ie, wraparound) */
727         if (!next)
728                 list_for_each_entry(i, head, list) {
729                         next = i;
730                         break;
731                 }
732
733         return next;
734 }
735
736
737 static void free_tag(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
738 {
739         if (srb->tag_number < 255) {
740                 dcb->tag_mask &= ~(1 << srb->tag_number);       /* free tag mask */
741                 srb->tag_number = 255;
742         }
743 }
744
745
746 /* Find cmd in SRB list */
747 inline static struct ScsiReqBlk *find_cmd(struct scsi_cmnd *cmd, 
748                 struct list_head *head)
749 {
750         struct ScsiReqBlk *i;
751         list_for_each_entry(i, head, list)
752                 if (i->cmd == cmd)
753                         return i;
754         return NULL;
755 }
756
757
758 static struct ScsiReqBlk *srb_get_free(struct AdapterCtlBlk *acb)
759 {
760         struct list_head *head = &acb->srb_free_list;
761         struct ScsiReqBlk *srb = NULL;
762
763         if (!list_empty(head)) {
764                 srb = list_entry(head->next, struct ScsiReqBlk, list);
765                 list_del(head->next);
766                 dprintkdbg(DBG_0, "srb_get_free: srb=%p\n", srb);
767         }
768         return srb;
769 }
770
771
772 static void srb_free_insert(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
773 {
774         dprintkdbg(DBG_0, "srb_free_insert: srb=%p\n", srb);
775         list_add_tail(&srb->list, &acb->srb_free_list);
776 }
777
778
779 static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
780                 struct ScsiReqBlk *srb)
781 {
782         dprintkdbg(DBG_0, "srb_waiting_insert: (pid#%li) <%02i-%i> srb=%p\n",
783                 srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
784         list_add(&srb->list, &dcb->srb_waiting_list);
785 }
786
787
788 static void srb_waiting_append(struct DeviceCtlBlk *dcb,
789                 struct ScsiReqBlk *srb)
790 {
791         dprintkdbg(DBG_0, "srb_waiting_append: (pid#%li) <%02i-%i> srb=%p\n",
792                  srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
793         list_add_tail(&srb->list, &dcb->srb_waiting_list);
794 }
795
796
797 static void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
798 {
799         dprintkdbg(DBG_0, "srb_going_append: (pid#%li) <%02i-%i> srb=%p\n",
800                 srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
801         list_add_tail(&srb->list, &dcb->srb_going_list);
802 }
803
804
805 static void srb_going_remove(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
806 {
807         struct ScsiReqBlk *i;
808         struct ScsiReqBlk *tmp;
809         dprintkdbg(DBG_0, "srb_going_remove: (pid#%li) <%02i-%i> srb=%p\n",
810                 srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
811
812         list_for_each_entry_safe(i, tmp, &dcb->srb_going_list, list)
813                 if (i == srb) {
814                         list_del(&srb->list);
815                         break;
816                 }
817 }
818
819
820 static void srb_waiting_remove(struct DeviceCtlBlk *dcb,
821                 struct ScsiReqBlk *srb)
822 {
823         struct ScsiReqBlk *i;
824         struct ScsiReqBlk *tmp;
825         dprintkdbg(DBG_0, "srb_waiting_remove: (pid#%li) <%02i-%i> srb=%p\n",
826                 srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
827
828         list_for_each_entry_safe(i, tmp, &dcb->srb_waiting_list, list)
829                 if (i == srb) {
830                         list_del(&srb->list);
831                         break;
832                 }
833 }
834
835
836 static void srb_going_to_waiting_move(struct DeviceCtlBlk *dcb,
837                 struct ScsiReqBlk *srb)
838 {
839         dprintkdbg(DBG_0,
840                 "srb_going_to_waiting_move: (pid#%li) <%02i-%i> srb=%p\n",
841                 srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
842         list_move(&srb->list, &dcb->srb_waiting_list);
843 }
844
845
846 static void srb_waiting_to_going_move(struct DeviceCtlBlk *dcb,
847                 struct ScsiReqBlk *srb)
848 {
849         dprintkdbg(DBG_0,
850                 "srb_waiting_to_going_move: (pid#%li) <%02i-%i> srb=%p\n",
851                 srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
852         list_move(&srb->list, &dcb->srb_going_list);
853 }
854
855
856 /* Sets the timer to wake us up */
857 static void waiting_set_timer(struct AdapterCtlBlk *acb, unsigned long to)
858 {
859         if (timer_pending(&acb->waiting_timer))
860                 return;
861         init_timer(&acb->waiting_timer);
862         acb->waiting_timer.function = waiting_timeout;
863         acb->waiting_timer.data = (unsigned long) acb;
864         if (time_before(jiffies + to, acb->scsi_host->last_reset - HZ / 2))
865                 acb->waiting_timer.expires =
866                     acb->scsi_host->last_reset - HZ / 2 + 1;
867         else
868                 acb->waiting_timer.expires = jiffies + to + 1;
869         add_timer(&acb->waiting_timer);
870 }
871
872
873 /* Send the next command from the waiting list to the bus */
874 static void waiting_process_next(struct AdapterCtlBlk *acb)
875 {
876         struct DeviceCtlBlk *start = NULL;
877         struct DeviceCtlBlk *pos;
878         struct DeviceCtlBlk *dcb;
879         struct ScsiReqBlk *srb;
880         struct list_head *dcb_list_head = &acb->dcb_list;
881
882         if (acb->active_dcb
883             || (acb->acb_flag & (RESET_DETECT + RESET_DONE + RESET_DEV)))
884                 return;
885
886         if (timer_pending(&acb->waiting_timer))
887                 del_timer(&acb->waiting_timer);
888
889         if (list_empty(dcb_list_head))
890                 return;
891
892         /*
893          * Find the starting dcb. Need to find it again in the list
894          * since the list may have changed since we set the ptr to it
895          */
896         list_for_each_entry(dcb, dcb_list_head, list)
897                 if (dcb == acb->dcb_run_robin) {
898                         start = dcb;
899                         break;
900                 }
901         if (!start) {
902                 /* This can happen! */
903                 start = list_entry(dcb_list_head->next, typeof(*start), list);
904                 acb->dcb_run_robin = start;
905         }
906
907
908         /*
909          * Loop over the dcb, but we start somewhere (potentially) in
910          * the middle of the loop so we need to manully do this.
911          */
912         pos = start;
913         do {
914                 struct list_head *waiting_list_head = &pos->srb_waiting_list;
915
916                 /* Make sure, the next another device gets scheduled ... */
917                 acb->dcb_run_robin = dcb_get_next(dcb_list_head,
918                                                   acb->dcb_run_robin);
919
920                 if (list_empty(waiting_list_head) ||
921                     pos->max_command <= list_size(&pos->srb_going_list)) {
922                         /* move to next dcb */
923                         pos = dcb_get_next(dcb_list_head, pos);
924                 } else {
925                         srb = list_entry(waiting_list_head->next,
926                                          struct ScsiReqBlk, list);
927
928                         /* Try to send to the bus */
929                         if (!start_scsi(acb, pos, srb))
930                                 srb_waiting_to_going_move(pos, srb);
931                         else
932                                 waiting_set_timer(acb, HZ/50);
933                         break;
934                 }
935         } while (pos != start);
936 }
937
938
939 /* Wake up waiting queue */
940 static void waiting_timeout(unsigned long ptr)
941 {
942         unsigned long flags;
943         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)ptr;
944         dprintkdbg(DBG_1,
945                 "waiting_timeout: Queue woken up by timer. acb=%p\n", acb);
946         DC395x_LOCK_IO(acb->scsi_host, flags);
947         waiting_process_next(acb);
948         DC395x_UNLOCK_IO(acb->scsi_host, flags);
949 }
950
951
952 /* Get the DCB for a given ID/LUN combination */
953 static struct DeviceCtlBlk *find_dcb(struct AdapterCtlBlk *acb, u8 id, u8 lun)
954 {
955         return acb->children[id][lun];
956 }
957
958
959 /* Send SCSI Request Block (srb) to adapter (acb) */
960 static void send_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
961 {
962         struct DeviceCtlBlk *dcb = srb->dcb;
963
964         if (dcb->max_command <= list_size(&dcb->srb_going_list) ||
965             acb->active_dcb ||
966             (acb->acb_flag & (RESET_DETECT + RESET_DONE + RESET_DEV))) {
967                 srb_waiting_append(dcb, srb);
968                 waiting_process_next(acb);
969                 return;
970         }
971
972         if (!start_scsi(acb, dcb, srb))
973                 srb_going_append(dcb, srb);
974         else {
975                 srb_waiting_insert(dcb, srb);
976                 waiting_set_timer(acb, HZ / 50);
977         }
978 }
979
980
981 /* Prepare SRB for being sent to Device DCB w/ command *cmd */
982 static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
983                 struct ScsiReqBlk *srb)
984 {
985         enum dma_data_direction dir = cmd->sc_data_direction;
986         dprintkdbg(DBG_0, "build_srb: (pid#%li) <%02i-%i>\n",
987                 cmd->pid, dcb->target_id, dcb->target_lun);
988
989         srb->dcb = dcb;
990         srb->cmd = cmd;
991         srb->sg_count = 0;
992         srb->total_xfer_length = 0;
993         srb->sg_bus_addr = 0;
994         srb->virt_addr = NULL;
995         srb->sg_index = 0;
996         srb->adapter_status = 0;
997         srb->target_status = 0;
998         srb->msg_count = 0;
999         srb->status = 0;
1000         srb->flag = 0;
1001         srb->state = 0;
1002         srb->retry_count = 0;
1003         srb->tag_number = TAG_NONE;
1004         srb->scsi_phase = PH_BUS_FREE;  /* initial phase */
1005         srb->end_message = 0;
1006
1007         if (dir == PCI_DMA_NONE || !cmd->request_buffer) {
1008                 dprintkdbg(DBG_0,
1009                         "build_srb: [0] len=%d buf=%p use_sg=%d !MAP=%08x\n",
1010                         cmd->bufflen, cmd->request_buffer,
1011                         cmd->use_sg, srb->segment_x[0].address);
1012         } else if (cmd->use_sg) {
1013                 int i;
1014                 u32 reqlen = cmd->request_bufflen;
1015                 struct scatterlist *sl = (struct scatterlist *)
1016                                          cmd->request_buffer;
1017                 struct SGentry *sgp = srb->segment_x;
1018                 srb->sg_count = pci_map_sg(dcb->acb->dev, sl, cmd->use_sg,
1019                                            dir);
1020                 dprintkdbg(DBG_0,
1021                         "build_srb: [n] len=%d buf=%p use_sg=%d segs=%d\n",
1022                         reqlen, cmd->request_buffer, cmd->use_sg,
1023                         srb->sg_count);
1024
1025                 for (i = 0; i < srb->sg_count; i++) {
1026                         u32 seglen = (u32)sg_dma_len(sl + i);
1027                         sgp[i].address = (u32)sg_dma_address(sl + i);
1028                         sgp[i].length = seglen;
1029                         srb->total_xfer_length += seglen;
1030                         srb->virt_map[i] = kmap(sl[i].page);
1031                 }
1032                 srb->virt_addr = srb->virt_map[0];
1033                 sgp += srb->sg_count - 1;
1034
1035                 /*
1036                  * adjust last page if too big as it is allocated
1037                  * on even page boundaries
1038                  */
1039                 if (srb->total_xfer_length > reqlen) {
1040                         sgp->length -= (srb->total_xfer_length - reqlen);
1041                         srb->total_xfer_length = reqlen;
1042                 }
1043
1044                 /* Fixup for WIDE padding - make sure length is even */
1045                 if (dcb->sync_period & WIDE_SYNC &&
1046                     srb->total_xfer_length % 2) {
1047                         srb->total_xfer_length++;
1048                         sgp->length++;
1049                 }
1050
1051                 srb->sg_bus_addr = pci_map_single(dcb->acb->dev,
1052                                                 srb->segment_x,
1053                                                 SEGMENTX_LEN,
1054                                                 PCI_DMA_TODEVICE);
1055
1056                 dprintkdbg(DBG_SG, "build_srb: [n] map sg %p->%08x(%05x)\n",
1057                         srb->segment_x, srb->sg_bus_addr, SEGMENTX_LEN);
1058         } else {
1059                 srb->total_xfer_length = cmd->request_bufflen;
1060                 srb->sg_count = 1;
1061                 srb->segment_x[0].address =
1062                         pci_map_single(dcb->acb->dev, cmd->request_buffer,
1063                                        srb->total_xfer_length, dir);
1064
1065                 /* Fixup for WIDE padding - make sure length is even */
1066                 if (dcb->sync_period & WIDE_SYNC && srb->total_xfer_length % 2)
1067                         srb->total_xfer_length++;
1068
1069                 srb->segment_x[0].length = srb->total_xfer_length;
1070                 srb->virt_addr = cmd->request_buffer;
1071                 dprintkdbg(DBG_0,
1072                         "build_srb: [1] len=%d buf=%p use_sg=%d map=%08x\n",
1073                         srb->total_xfer_length, cmd->request_buffer,
1074                         cmd->use_sg, srb->segment_x[0].address);
1075         }
1076 }
1077
1078
1079 /**
1080  * dc395x_queue_command - queue scsi command passed from the mid
1081  * layer, invoke 'done' on completion
1082  *
1083  * @cmd: pointer to scsi command object
1084  * @done: function pointer to be invoked on completion
1085  *
1086  * Returns 1 if the adapter (host) is busy, else returns 0. One
1087  * reason for an adapter to be busy is that the number
1088  * of outstanding queued commands is already equal to
1089  * struct Scsi_Host::can_queue .
1090  *
1091  * Required: if struct Scsi_Host::can_queue is ever non-zero
1092  *           then this function is required.
1093  *
1094  * Locks: struct Scsi_Host::host_lock held on entry (with "irqsave")
1095  *        and is expected to be held on return.
1096  *
1097  **/
1098 static int dc395x_queue_command(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
1099 {
1100         struct DeviceCtlBlk *dcb;
1101         struct ScsiReqBlk *srb;
1102         struct AdapterCtlBlk *acb =
1103             (struct AdapterCtlBlk *)cmd->device->host->hostdata;
1104         dprintkdbg(DBG_0, "queue_command: (pid#%li) <%02i-%i> cmnd=0x%02x\n",
1105                 cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
1106
1107         /* Assume BAD_TARGET; will be cleared later */
1108         cmd->result = DID_BAD_TARGET << 16;
1109
1110         /* ignore invalid targets */
1111         if (cmd->device->id >= acb->scsi_host->max_id ||
1112             cmd->device->lun >= acb->scsi_host->max_lun ||
1113             cmd->device->lun >31) {
1114                 goto complete;
1115         }
1116
1117         /* does the specified lun on the specified device exist */
1118         if (!(acb->dcb_map[cmd->device->id] & (1 << cmd->device->lun))) {
1119                 dprintkl(KERN_INFO, "queue_command: Ignore target <%02i-%i>\n",
1120                         cmd->device->id, cmd->device->lun);
1121                 goto complete;
1122         }
1123
1124         /* do we have a DCB for the device */
1125         dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
1126         if (!dcb) {
1127                 /* should never happen */
1128                 dprintkl(KERN_ERR, "queue_command: No such device <%02i-%i>",
1129                         cmd->device->id, cmd->device->lun);
1130                 goto complete;
1131         }
1132
1133         /* set callback and clear result in the command */
1134         cmd->scsi_done = done;
1135         cmd->result = 0;
1136
1137         srb = srb_get_free(acb);
1138         if (!srb)
1139         {
1140                 /*
1141                  * Return 1 since we are unable to queue this command at this
1142                  * point in time.
1143                  */
1144                 dprintkdbg(DBG_0, "queue_command: No free srb's\n");
1145                 return 1;
1146         }
1147
1148         build_srb(cmd, dcb, srb);
1149
1150         if (!list_empty(&dcb->srb_waiting_list)) {
1151                 /* append to waiting queue */
1152                 srb_waiting_append(dcb, srb);
1153                 waiting_process_next(acb);
1154         } else {
1155                 /* process immediately */
1156                 send_srb(acb, srb);
1157         }
1158         dprintkdbg(DBG_1, "queue_command: (pid#%li) done\n", cmd->pid);
1159         return 0;
1160
1161 complete:
1162         /*
1163          * Complete the command immediatey, and then return 0 to
1164          * indicate that we have handled the command. This is usually
1165          * done when the commad is for things like non existent
1166          * devices.
1167          */
1168         done(cmd);
1169         return 0;
1170 }
1171
1172
1173 /*
1174  * Return the disk geometry for the given SCSI device.
1175  */
1176 static int dc395x_bios_param(struct scsi_device *sdev,
1177                 struct block_device *bdev, sector_t capacity, int *info)
1178 {
1179 #ifdef CONFIG_SCSI_DC395x_TRMS1040_TRADMAP
1180         int heads, sectors, cylinders;
1181         struct AdapterCtlBlk *acb;
1182         int size = capacity;
1183
1184         dprintkdbg(DBG_0, "dc395x_bios_param..............\n");
1185         acb = (struct AdapterCtlBlk *)sdev->host->hostdata;
1186         heads = 64;
1187         sectors = 32;
1188         cylinders = size / (heads * sectors);
1189
1190         if ((acb->gmode2 & NAC_GREATER_1G) && (cylinders > 1024)) {
1191                 heads = 255;
1192                 sectors = 63;
1193                 cylinders = size / (heads * sectors);
1194         }
1195         geom[0] = heads;
1196         geom[1] = sectors;
1197         geom[2] = cylinders;
1198         return 0;
1199 #else
1200         return scsicam_bios_param(bdev, capacity, info);
1201 #endif
1202 }
1203
1204
1205 static void dump_register_info(struct AdapterCtlBlk *acb,
1206                 struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
1207 {
1208         u16 pstat;
1209         struct pci_dev *dev = acb->dev;
1210         pci_read_config_word(dev, PCI_STATUS, &pstat);
1211         if (!dcb)
1212                 dcb = acb->active_dcb;
1213         if (!srb && dcb)
1214                 srb = dcb->active_srb;
1215         if (srb) {
1216                 if (!srb->cmd)
1217                         dprintkl(KERN_INFO, "dump: srb=%p cmd=%p OOOPS!\n",
1218                                 srb, srb->cmd);
1219                 else
1220                         dprintkl(KERN_INFO, "dump: srb=%p cmd=%p (pid#%li) "
1221                                  "cmnd=0x%02x <%02i-%i>\n",
1222                                 srb, srb->cmd, srb->cmd->pid,
1223                                 srb->cmd->cmnd[0], srb->cmd->device->id,
1224                                 srb->cmd->device->lun);
1225                 printk("  sglist=%p cnt=%i idx=%i len=%i\n",
1226                        srb->segment_x, srb->sg_count, srb->sg_index,
1227                        srb->total_xfer_length);
1228                 printk("  state=0x%04x status=0x%02x phase=0x%02x (%sconn.)\n",
1229                        srb->state, srb->status, srb->scsi_phase,
1230                        (acb->active_dcb) ? "" : "not");
1231         }
1232         dprintkl(KERN_INFO, "dump: SCSI{status=0x%04x fifocnt=0x%02x "
1233                 "signals=0x%02x irqstat=0x%02x sync=0x%02x target=0x%02x "
1234                 "rselid=0x%02x ctr=0x%08x irqen=0x%02x config=0x%04x "
1235                 "config2=0x%02x cmd=0x%02x selto=0x%02x}\n",
1236                 DC395x_read16(acb, TRM_S1040_SCSI_STATUS),
1237                 DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
1238                 DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL),
1239                 DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS),
1240                 DC395x_read8(acb, TRM_S1040_SCSI_SYNC),
1241                 DC395x_read8(acb, TRM_S1040_SCSI_TARGETID),
1242                 DC395x_read8(acb, TRM_S1040_SCSI_IDMSG),
1243                 DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
1244                 DC395x_read8(acb, TRM_S1040_SCSI_INTEN),
1245                 DC395x_read16(acb, TRM_S1040_SCSI_CONFIG0),
1246                 DC395x_read8(acb, TRM_S1040_SCSI_CONFIG2),
1247                 DC395x_read8(acb, TRM_S1040_SCSI_COMMAND),
1248                 DC395x_read8(acb, TRM_S1040_SCSI_TIMEOUT));
1249         dprintkl(KERN_INFO, "dump: DMA{cmd=0x%04x fifocnt=0x%02x fstat=0x%02x "
1250                 "irqstat=0x%02x irqen=0x%02x cfg=0x%04x tctr=0x%08x "
1251                 "ctctr=0x%08x addr=0x%08x:0x%08x}\n",
1252                 DC395x_read16(acb, TRM_S1040_DMA_COMMAND),
1253                 DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
1254                 DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
1255                 DC395x_read8(acb, TRM_S1040_DMA_STATUS),
1256                 DC395x_read8(acb, TRM_S1040_DMA_INTEN),
1257                 DC395x_read16(acb, TRM_S1040_DMA_CONFIG),
1258                 DC395x_read32(acb, TRM_S1040_DMA_XCNT),
1259                 DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
1260                 DC395x_read32(acb, TRM_S1040_DMA_XHIGHADDR),
1261                 DC395x_read32(acb, TRM_S1040_DMA_XLOWADDR));
1262         dprintkl(KERN_INFO, "dump: gen{gctrl=0x%02x gstat=0x%02x gtmr=0x%02x} "
1263                 "pci{status=0x%04x}\n",
1264                 DC395x_read8(acb, TRM_S1040_GEN_CONTROL),
1265                 DC395x_read8(acb, TRM_S1040_GEN_STATUS),
1266                 DC395x_read8(acb, TRM_S1040_GEN_TIMER),
1267                 pstat);
1268 }
1269
1270
1271 static inline void clear_fifo(struct AdapterCtlBlk *acb, char *txt)
1272 {
1273 #if debug_enabled(DBG_FIFO)
1274         u8 lines = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
1275         u8 fifocnt = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
1276         if (!(fifocnt & 0x40))
1277                 dprintkdbg(DBG_FIFO,
1278                         "clear_fifo: (%i bytes) on phase %02x in %s\n",
1279                         fifocnt & 0x3f, lines, txt);
1280 #endif
1281         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRFIFO);
1282 }
1283
1284
1285 static void reset_dev_param(struct AdapterCtlBlk *acb)
1286 {
1287         struct DeviceCtlBlk *dcb;
1288         struct NvRamType *eeprom = &acb->eeprom;
1289         dprintkdbg(DBG_0, "reset_dev_param: acb=%p\n", acb);
1290
1291         list_for_each_entry(dcb, &acb->dcb_list, list) {
1292                 u8 period_index;
1293
1294                 dcb->sync_mode &= ~(SYNC_NEGO_DONE + WIDE_NEGO_DONE);
1295                 dcb->sync_period = 0;
1296                 dcb->sync_offset = 0;
1297
1298                 dcb->dev_mode = eeprom->target[dcb->target_id].cfg0;
1299                 period_index = eeprom->target[dcb->target_id].period & 0x07;
1300                 dcb->min_nego_period = clock_period[period_index];
1301                 if (!(dcb->dev_mode & NTC_DO_WIDE_NEGO)
1302                     || !(acb->config & HCC_WIDE_CARD))
1303                         dcb->sync_mode &= ~WIDE_NEGO_ENABLE;
1304         }
1305 }
1306
1307
1308 /*
1309  * perform a hard reset on the SCSI bus
1310  * @cmd - some command for this host (for fetching hooks)
1311  * Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
1312  */
1313 static int dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
1314 {
1315         struct AdapterCtlBlk *acb =
1316                 (struct AdapterCtlBlk *)cmd->device->host->hostdata;
1317         dprintkl(KERN_INFO,
1318                 "eh_bus_reset: (pid#%li) target=<%02i-%i> cmd=%p\n",
1319                 cmd->pid, cmd->device->id, cmd->device->lun, cmd);
1320
1321         if (timer_pending(&acb->waiting_timer))
1322                 del_timer(&acb->waiting_timer);
1323
1324         /*
1325          * disable interrupt    
1326          */
1327         DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0x00);
1328         DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0x00);
1329         DC395x_write8(acb, TRM_S1040_SCSI_CONTROL, DO_RSTMODULE);
1330         DC395x_write8(acb, TRM_S1040_DMA_CONTROL, DMARESETMODULE);
1331
1332         reset_scsi_bus(acb);
1333         udelay(500);
1334
1335         /* We may be in serious trouble. Wait some seconds */
1336         acb->scsi_host->last_reset =
1337             jiffies + 3 * HZ / 2 +
1338             HZ * acb->eeprom.delay_time;
1339
1340         /*
1341          * re-enable interrupt      
1342          */
1343         /* Clear SCSI FIFO          */
1344         DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
1345         clear_fifo(acb, "eh_bus_reset");
1346         /* Delete pending IRQ */
1347         DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
1348         set_basic_config(acb);
1349
1350         reset_dev_param(acb);
1351         doing_srb_done(acb, DID_RESET, cmd, 0);
1352         acb->active_dcb = NULL;
1353         acb->acb_flag = 0;      /* RESET_DETECT, RESET_DONE ,RESET_DEV */
1354         waiting_process_next(acb);
1355
1356         return SUCCESS;
1357 }
1358
1359
1360 /*
1361  * abort an errant SCSI command
1362  * @cmd - command to be aborted
1363  * Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
1364  */
1365 static int dc395x_eh_abort(struct scsi_cmnd *cmd)
1366 {
1367         /*
1368          * Look into our command queues: If it has not been sent already,
1369          * we remove it and return success. Otherwise fail.
1370          */
1371         struct AdapterCtlBlk *acb =
1372             (struct AdapterCtlBlk *)cmd->device->host->hostdata;
1373         struct DeviceCtlBlk *dcb;
1374         struct ScsiReqBlk *srb;
1375         dprintkl(KERN_INFO, "eh_abort: (pid#%li) target=<%02i-%i> cmd=%p\n",
1376                 cmd->pid, cmd->device->id, cmd->device->lun, cmd);
1377
1378         dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
1379         if (!dcb) {
1380                 dprintkl(KERN_DEBUG, "eh_abort: No such device\n");
1381                 return FAILED;
1382         }
1383
1384         srb = find_cmd(cmd, &dcb->srb_waiting_list);
1385         if (srb) {
1386                 srb_waiting_remove(dcb, srb);
1387                 pci_unmap_srb_sense(acb, srb);
1388                 pci_unmap_srb(acb, srb);
1389                 free_tag(dcb, srb);
1390                 srb_free_insert(acb, srb);
1391                 dprintkl(KERN_DEBUG, "eh_abort: Command was waiting\n");
1392                 cmd->result = DID_ABORT << 16;
1393                 return SUCCESS;
1394         }
1395         srb = find_cmd(cmd, &dcb->srb_going_list);
1396         if (srb) {
1397                 dprintkl(KERN_DEBUG, "eh_abort: Command in progress");
1398                 /* XXX: Should abort the command here */
1399         } else {
1400                 dprintkl(KERN_DEBUG, "eh_abort: Command not found");
1401         }
1402         return FAILED;
1403 }
1404
1405
1406 /* SDTR */
1407 static void build_sdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
1408                 struct ScsiReqBlk *srb)
1409 {
1410         u8 *ptr = srb->msgout_buf + srb->msg_count;
1411         if (srb->msg_count > 1) {
1412                 dprintkl(KERN_INFO,
1413                         "build_sdtr: msgout_buf BUSY (%i: %02x %02x)\n",
1414                         srb->msg_count, srb->msgout_buf[0],
1415                         srb->msgout_buf[1]);
1416                 return;
1417         }
1418         if (!(dcb->dev_mode & NTC_DO_SYNC_NEGO)) {
1419                 dcb->sync_offset = 0;
1420                 dcb->min_nego_period = 200 >> 2;
1421         } else if (dcb->sync_offset == 0)
1422                 dcb->sync_offset = SYNC_NEGO_OFFSET;
1423
1424         *ptr++ = MSG_EXTENDED;  /* (01h) */
1425         *ptr++ = 3;             /* length */
1426         *ptr++ = EXTENDED_SDTR; /* (01h) */
1427         *ptr++ = dcb->min_nego_period;  /* Transfer period (in 4ns) */
1428         *ptr++ = dcb->sync_offset;      /* Transfer period (max. REQ/ACK dist) */
1429         srb->msg_count += 5;
1430         srb->state |= SRB_DO_SYNC_NEGO;
1431 }
1432
1433
1434 /* WDTR */
1435 static void build_wdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
1436                 struct ScsiReqBlk *srb)
1437 {
1438         u8 wide = ((dcb->dev_mode & NTC_DO_WIDE_NEGO) &
1439                    (acb->config & HCC_WIDE_CARD)) ? 1 : 0;
1440         u8 *ptr = srb->msgout_buf + srb->msg_count;
1441         if (srb->msg_count > 1) {
1442                 dprintkl(KERN_INFO,
1443                         "build_wdtr: msgout_buf BUSY (%i: %02x %02x)\n",
1444                         srb->msg_count, srb->msgout_buf[0],
1445                         srb->msgout_buf[1]);
1446                 return;
1447         }
1448         *ptr++ = MSG_EXTENDED;  /* (01h) */
1449         *ptr++ = 2;             /* length */
1450         *ptr++ = EXTENDED_WDTR; /* (03h) */
1451         *ptr++ = wide;
1452         srb->msg_count += 4;
1453         srb->state |= SRB_DO_WIDE_NEGO;
1454 }
1455
1456
1457 #if 0
1458 /* Timer to work around chip flaw: When selecting and the bus is 
1459  * busy, we sometimes miss a Selection timeout IRQ */
1460 void selection_timeout_missed(unsigned long ptr);
1461 /* Sets the timer to wake us up */
1462 static void selto_timer(struct AdapterCtlBlk *acb)
1463 {
1464         if (timer_pending(&acb->selto_timer))
1465                 return;
1466         acb->selto_timer.function = selection_timeout_missed;
1467         acb->selto_timer.data = (unsigned long) acb;
1468         if (time_before
1469             (jiffies + HZ, acb->scsi_host->last_reset + HZ / 2))
1470                 acb->selto_timer.expires =
1471                     acb->scsi_host->last_reset + HZ / 2 + 1;
1472         else
1473                 acb->selto_timer.expires = jiffies + HZ + 1;
1474         add_timer(&acb->selto_timer);
1475 }
1476
1477
1478 void selection_timeout_missed(unsigned long ptr)
1479 {
1480         unsigned long flags;
1481         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)ptr;
1482         struct ScsiReqBlk *srb;
1483         dprintkl(KERN_DEBUG, "Chip forgot to produce SelTO IRQ!\n");
1484         if (!acb->active_dcb || !acb->active_dcb->active_srb) {
1485                 dprintkl(KERN_DEBUG, "... but no cmd pending? Oops!\n");
1486                 return;
1487         }
1488         DC395x_LOCK_IO(acb->scsi_host, flags);
1489         srb = acb->active_dcb->active_srb;
1490         disconnect(acb);
1491         DC395x_UNLOCK_IO(acb->scsi_host, flags);
1492 }
1493 #endif
1494
1495
1496 static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
1497                 struct ScsiReqBlk* srb)
1498 {
1499         u16 s_stat2, return_code;
1500         u8 s_stat, scsicommand, i, identify_message;
1501         u8 *ptr;
1502         dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> srb=%p\n",
1503                 srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
1504
1505         srb->tag_number = TAG_NONE;     /* acb->tag_max_num: had error read in eeprom */
1506
1507         s_stat = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
1508         s_stat2 = 0;
1509         s_stat2 = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
1510 #if 1
1511         if (s_stat & 0x20 /* s_stat2 & 0x02000 */ ) {
1512                 dprintkdbg(DBG_KG, "start_scsi: (pid#%li) BUSY %02x %04x\n",
1513                         srb->cmd->pid, s_stat, s_stat2);
1514                 /*
1515                  * Try anyway?
1516                  *
1517                  * We could, BUT: Sometimes the TRM_S1040 misses to produce a Selection
1518                  * Timeout, a Disconnect or a Reselction IRQ, so we would be screwed!
1519                  * (This is likely to be a bug in the hardware. Obviously, most people
1520                  *  only have one initiator per SCSI bus.)
1521                  * Instead let this fail and have the timer make sure the command is 
1522                  * tried again after a short time
1523                  */
1524                 /*selto_timer (acb); */
1525                 return 1;
1526         }
1527 #endif
1528         if (acb->active_dcb) {
1529                 dprintkl(KERN_DEBUG, "start_scsi: (pid#%li) Attempt to start a"
1530                         "command while another command (pid#%li) is active.",
1531                         srb->cmd->pid,
1532                         acb->active_dcb->active_srb ?
1533                             acb->active_dcb->active_srb->cmd->pid : 0);
1534                 return 1;
1535         }
1536         if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
1537                 dprintkdbg(DBG_KG, "start_scsi: (pid#%li) Failed (busy)\n",
1538                         srb->cmd->pid);
1539                 return 1;
1540         }
1541         /* Allow starting of SCSI commands half a second before we allow the mid-level
1542          * to queue them again after a reset */
1543         if (time_before(jiffies, acb->scsi_host->last_reset - HZ / 2)) {
1544                 dprintkdbg(DBG_KG, "start_scsi: Refuse cmds (reset wait)\n");
1545                 return 1;
1546         }
1547
1548         /* Flush FIFO */
1549         clear_fifo(acb, "start_scsi");
1550         DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id);
1551         DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id);
1552         DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period);
1553         DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset);
1554         srb->scsi_phase = PH_BUS_FREE;  /* initial phase */
1555
1556         identify_message = dcb->identify_msg;
1557         /*DC395x_TRM_write8(TRM_S1040_SCSI_IDMSG, identify_message); */
1558         /* Don't allow disconnection for AUTO_REQSENSE: Cont.All.Cond.! */
1559         if (srb->flag & AUTO_REQSENSE)
1560                 identify_message &= 0xBF;
1561
1562         if (((srb->cmd->cmnd[0] == INQUIRY)
1563              || (srb->cmd->cmnd[0] == REQUEST_SENSE)
1564              || (srb->flag & AUTO_REQSENSE))
1565             && (((dcb->sync_mode & WIDE_NEGO_ENABLE)
1566                  && !(dcb->sync_mode & WIDE_NEGO_DONE))
1567                 || ((dcb->sync_mode & SYNC_NEGO_ENABLE)
1568                     && !(dcb->sync_mode & SYNC_NEGO_DONE)))
1569             && (dcb->target_lun == 0)) {
1570                 srb->msgout_buf[0] = identify_message;
1571                 srb->msg_count = 1;
1572                 scsicommand = SCMD_SEL_ATNSTOP;
1573                 srb->state = SRB_MSGOUT;
1574 #ifndef SYNC_FIRST
1575                 if (dcb->sync_mode & WIDE_NEGO_ENABLE
1576                     && dcb->inquiry7 & SCSI_INQ_WBUS16) {
1577                         build_wdtr(acb, dcb, srb);
1578                         goto no_cmd;
1579                 }
1580 #endif
1581                 if (dcb->sync_mode & SYNC_NEGO_ENABLE
1582                     && dcb->inquiry7 & SCSI_INQ_SYNC) {
1583                         build_sdtr(acb, dcb, srb);
1584                         goto no_cmd;
1585                 }
1586                 if (dcb->sync_mode & WIDE_NEGO_ENABLE
1587                     && dcb->inquiry7 & SCSI_INQ_WBUS16) {
1588                         build_wdtr(acb, dcb, srb);
1589                         goto no_cmd;
1590                 }
1591                 srb->msg_count = 0;
1592         }
1593         /* Send identify message */
1594         DC395x_write8(acb, TRM_S1040_SCSI_FIFO, identify_message);
1595
1596         scsicommand = SCMD_SEL_ATN;
1597         srb->state = SRB_START_;
1598 #ifndef DC395x_NO_TAGQ
1599         if ((dcb->sync_mode & EN_TAG_QUEUEING)
1600             && (identify_message & 0xC0)) {
1601                 /* Send Tag message */
1602                 u32 tag_mask = 1;
1603                 u8 tag_number = 0;
1604                 while (tag_mask & dcb->tag_mask
1605                        && tag_number <= dcb->max_command) {
1606                         tag_mask = tag_mask << 1;
1607                         tag_number++;
1608                 }
1609                 if (tag_number >= dcb->max_command) {
1610                         dprintkl(KERN_WARNING, "start_scsi: (pid#%li) "
1611                                 "Out of tags target=<%02i-%i>)\n",
1612                                 srb->cmd->pid, srb->cmd->device->id,
1613                                 srb->cmd->device->lun);
1614                         srb->state = SRB_READY;
1615                         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
1616                                        DO_HWRESELECT);
1617                         return 1;
1618                 }
1619                 /* Send Tag id */
1620                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_SIMPLE_QTAG);
1621                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, tag_number);
1622                 dcb->tag_mask |= tag_mask;
1623                 srb->tag_number = tag_number;
1624                 scsicommand = SCMD_SEL_ATN3;
1625                 srb->state = SRB_START_;
1626         }
1627 #endif
1628 /*polling:*/
1629         /* Send CDB ..command block ......... */
1630         dprintkdbg(DBG_KG, "start_scsi: (pid#%li) <%02i-%i> cmnd=0x%02x tag=%i\n",
1631                 srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun,
1632                 srb->cmd->cmnd[0], srb->tag_number);
1633         if (srb->flag & AUTO_REQSENSE) {
1634                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
1635                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, (dcb->target_lun << 5));
1636                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1637                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1638                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO,
1639                               sizeof(srb->cmd->sense_buffer));
1640                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1641         } else {
1642                 ptr = (u8 *)srb->cmd->cmnd;
1643                 for (i = 0; i < srb->cmd->cmd_len; i++)
1644                         DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr++);
1645         }
1646       no_cmd:
1647         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
1648                        DO_HWRESELECT | DO_DATALATCH);
1649         if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
1650                 /* 
1651                  * If start_scsi return 1:
1652                  * we caught an interrupt (must be reset or reselection ... )
1653                  * : Let's process it first!
1654                  */
1655                 dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> Failed - busy\n",
1656                         srb->cmd->pid, dcb->target_id, dcb->target_lun);
1657                 srb->state = SRB_READY;
1658                 free_tag(dcb, srb);
1659                 srb->msg_count = 0;
1660                 return_code = 1;
1661                 /* This IRQ should NOT get lost, as we did not acknowledge it */
1662         } else {
1663                 /* 
1664                  * If start_scsi returns 0:
1665                  * we know that the SCSI processor is free
1666                  */
1667                 srb->scsi_phase = PH_BUS_FREE;  /* initial phase */
1668                 dcb->active_srb = srb;
1669                 acb->active_dcb = dcb;
1670                 return_code = 0;
1671                 /* it's important for atn stop */
1672                 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
1673                                DO_DATALATCH | DO_HWRESELECT);
1674                 /* SCSI command */
1675                 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, scsicommand);
1676         }
1677         return return_code;
1678 }
1679
1680
1681 #define DC395x_ENABLE_MSGOUT \
1682  DC395x_write16 (acb, TRM_S1040_SCSI_CONTROL, DO_SETATN); \
1683  srb->state |= SRB_MSGOUT
1684
1685
1686 /* abort command */
1687 static inline void enable_msgout_abort(struct AdapterCtlBlk *acb,
1688                 struct ScsiReqBlk *srb)
1689 {
1690         srb->msgout_buf[0] = ABORT;
1691         srb->msg_count = 1;
1692         DC395x_ENABLE_MSGOUT;
1693         srb->state &= ~SRB_MSGIN;
1694         srb->state |= SRB_MSGOUT;
1695 }
1696
1697
1698 /**
1699  * dc395x_handle_interrupt - Handle an interrupt that has been confirmed to
1700  *                           have been triggered for this card.
1701  *
1702  * @acb:         a pointer to the adpter control block
1703  * @scsi_status: the status return when we checked the card
1704  **/
1705 static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb,
1706                 u16 scsi_status)
1707 {
1708         struct DeviceCtlBlk *dcb;
1709         struct ScsiReqBlk *srb;
1710         u16 phase;
1711         u8 scsi_intstatus;
1712         unsigned long flags;
1713         void (*dc395x_statev)(struct AdapterCtlBlk *, struct ScsiReqBlk *, 
1714                               u16 *);
1715
1716         DC395x_LOCK_IO(acb->scsi_host, flags);
1717
1718         /* This acknowledges the IRQ */
1719         scsi_intstatus = DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
1720         if ((scsi_status & 0x2007) == 0x2002)
1721                 dprintkl(KERN_DEBUG,
1722                         "COP after COP completed? %04x\n", scsi_status);
1723         if (debug_enabled(DBG_KG)) {
1724                 if (scsi_intstatus & INT_SELTIMEOUT)
1725                         dprintkdbg(DBG_KG, "handle_interrupt: Selection timeout\n");
1726         }
1727         /*dprintkl(KERN_DEBUG, "handle_interrupt: intstatus = 0x%02x ", scsi_intstatus); */
1728
1729         if (timer_pending(&acb->selto_timer))
1730                 del_timer(&acb->selto_timer);
1731
1732         if (scsi_intstatus & (INT_SELTIMEOUT | INT_DISCONNECT)) {
1733                 disconnect(acb);        /* bus free interrupt  */
1734                 goto out_unlock;
1735         }
1736         if (scsi_intstatus & INT_RESELECTED) {
1737                 reselect(acb);
1738                 goto out_unlock;
1739         }
1740         if (scsi_intstatus & INT_SELECT) {
1741                 dprintkl(KERN_INFO, "Host does not support target mode!\n");
1742                 goto out_unlock;
1743         }
1744         if (scsi_intstatus & INT_SCSIRESET) {
1745                 scsi_reset_detect(acb);
1746                 goto out_unlock;
1747         }
1748         if (scsi_intstatus & (INT_BUSSERVICE | INT_CMDDONE)) {
1749                 dcb = acb->active_dcb;
1750                 if (!dcb) {
1751                         dprintkl(KERN_DEBUG,
1752                                 "Oops: BusService (%04x %02x) w/o ActiveDCB!\n",
1753                                 scsi_status, scsi_intstatus);
1754                         goto out_unlock;
1755                 }
1756                 srb = dcb->active_srb;
1757                 if (dcb->flag & ABORT_DEV_) {
1758                         dprintkdbg(DBG_0, "MsgOut Abort Device.....\n");
1759                         enable_msgout_abort(acb, srb);
1760                 }
1761
1762                 /* software sequential machine */
1763                 phase = (u16)srb->scsi_phase;
1764
1765                 /* 
1766                  * 62037 or 62137
1767                  * call  dc395x_scsi_phase0[]... "phase entry"
1768                  * handle every phase before start transfer
1769                  */
1770                 /* data_out_phase0,     phase:0 */
1771                 /* data_in_phase0,      phase:1 */
1772                 /* command_phase0,      phase:2 */
1773                 /* status_phase0,       phase:3 */
1774                 /* nop0,                phase:4 PH_BUS_FREE .. initial phase */
1775                 /* nop0,                phase:5 PH_BUS_FREE .. initial phase */
1776                 /* msgout_phase0,       phase:6 */
1777                 /* msgin_phase0,        phase:7 */
1778                 dc395x_statev = dc395x_scsi_phase0[phase];
1779                 dc395x_statev(acb, srb, &scsi_status);
1780
1781                 /* 
1782                  * if there were any exception occured scsi_status
1783                  * will be modify to bus free phase new scsi_status
1784                  * transfer out from ... previous dc395x_statev
1785                  */
1786                 srb->scsi_phase = scsi_status & PHASEMASK;
1787                 phase = (u16)scsi_status & PHASEMASK;
1788
1789                 /* 
1790                  * call  dc395x_scsi_phase1[]... "phase entry" handle
1791                  * every phase to do transfer
1792                  */
1793                 /* data_out_phase1,     phase:0 */
1794                 /* data_in_phase1,      phase:1 */
1795                 /* command_phase1,      phase:2 */
1796                 /* status_phase1,       phase:3 */
1797                 /* nop1,                phase:4 PH_BUS_FREE .. initial phase */
1798                 /* nop1,                phase:5 PH_BUS_FREE .. initial phase */
1799                 /* msgout_phase1,       phase:6 */
1800                 /* msgin_phase1,        phase:7 */
1801                 dc395x_statev = dc395x_scsi_phase1[phase];
1802                 dc395x_statev(acb, srb, &scsi_status);
1803         }
1804       out_unlock:
1805         DC395x_UNLOCK_IO(acb->scsi_host, flags);
1806 }
1807
1808
1809 static irqreturn_t dc395x_interrupt(int irq, void *dev_id,
1810                 struct pt_regs *regs)
1811 {
1812         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)dev_id;
1813         u16 scsi_status;
1814         u8 dma_status;
1815         irqreturn_t handled = IRQ_NONE;
1816
1817         /*
1818          * Check for pending interupt
1819          */
1820         scsi_status = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
1821         dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
1822         if (scsi_status & SCSIINTERRUPT) {
1823                 /* interupt pending - let's process it! */
1824                 dc395x_handle_interrupt(acb, scsi_status);
1825                 handled = IRQ_HANDLED;
1826         }
1827         else if (dma_status & 0x20) {
1828                 /* Error from the DMA engine */
1829                 dprintkl(KERN_INFO, "Interrupt from DMA engine: 0x%02x!\n", dma_status);
1830 #if 0
1831                 dprintkl(KERN_INFO, "This means DMA error! Try to handle ...\n");
1832                 if (acb->active_dcb) {
1833                         acb->active_dcb-> flag |= ABORT_DEV_;
1834                         if (acb->active_dcb->active_srb)
1835                                 enable_msgout_abort(acb, acb->active_dcb->active_srb);
1836                 }
1837                 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, ABORTXFER | CLRXFIFO);
1838 #else
1839                 dprintkl(KERN_INFO, "Ignoring DMA error (probably a bad thing) ...\n");
1840                 acb = NULL;
1841 #endif
1842                 handled = IRQ_HANDLED;
1843         }
1844
1845         return handled;
1846 }
1847
1848
1849 static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
1850                 u16 *pscsi_status)
1851 {
1852         dprintkdbg(DBG_0, "msgout_phase0: (pid#%li)\n", srb->cmd->pid);
1853         if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT))
1854                 *pscsi_status = PH_BUS_FREE;    /*.. initial phase */
1855
1856         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
1857         srb->state &= ~SRB_MSGOUT;
1858 }
1859
1860
1861 static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
1862                 u16 *pscsi_status)
1863 {
1864         u16 i;
1865         u8 *ptr;
1866         dprintkdbg(DBG_0, "msgout_phase1: (pid#%li)\n", srb->cmd->pid);
1867
1868         clear_fifo(acb, "msgout_phase1");
1869         if (!(srb->state & SRB_MSGOUT)) {
1870                 srb->state |= SRB_MSGOUT;
1871                 dprintkl(KERN_DEBUG,
1872                         "msgout_phase1: (pid#%li) Phase unexpected\n",
1873                         srb->cmd->pid); /* So what ? */
1874         }
1875         if (!srb->msg_count) {
1876                 dprintkdbg(DBG_0, "msgout_phase1: (pid#%li) NOP msg\n",
1877                         srb->cmd->pid);
1878                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_NOP);
1879                 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
1880                 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
1881                 return;
1882         }
1883         ptr = (u8 *)srb->msgout_buf;
1884         for (i = 0; i < srb->msg_count; i++)
1885                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr++);
1886         srb->msg_count = 0;
1887         if (srb->msgout_buf[0] == MSG_ABORT)
1888                 srb->state = SRB_ABORT_SENT;
1889
1890         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
1891 }
1892
1893
1894 static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
1895                 u16 *pscsi_status)
1896 {
1897         dprintkdbg(DBG_0, "command_phase0: (pid#%li)\n", srb->cmd->pid);
1898         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
1899 }
1900
1901
1902 static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
1903                 u16 *pscsi_status)
1904 {
1905         struct DeviceCtlBlk *dcb;
1906         u8 *ptr;
1907         u16 i;
1908         dprintkdbg(DBG_0, "command_phase1: (pid#%li)\n", srb->cmd->pid);
1909
1910         clear_fifo(acb, "command_phase1");
1911         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRATN);
1912         if (!(srb->flag & AUTO_REQSENSE)) {
1913                 ptr = (u8 *)srb->cmd->cmnd;
1914                 for (i = 0; i < srb->cmd->cmd_len; i++) {
1915                         DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr);
1916                         ptr++;
1917                 }
1918         } else {
1919                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
1920                 dcb = acb->active_dcb;
1921                 /* target id */
1922                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, (dcb->target_lun << 5));
1923                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1924                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1925                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO,
1926                               sizeof(srb->cmd->sense_buffer));
1927                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1928         }
1929         srb->state |= SRB_COMMAND;
1930         /* it's important for atn stop */
1931         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
1932         /* SCSI command */
1933         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
1934 }
1935
1936
1937 /*
1938  * Verify that the remaining space in the hw sg lists is the same as
1939  * the count of remaining bytes in srb->total_xfer_length
1940  */
1941 static void sg_verify_length(struct ScsiReqBlk *srb)
1942 {
1943         if (debug_enabled(DBG_SG)) {
1944                 unsigned len = 0;
1945                 unsigned idx = srb->sg_index;
1946                 struct SGentry *psge = srb->segment_x + idx;
1947                 for (; idx < srb->sg_count; psge++, idx++)
1948                         len += psge->length;
1949                 if (len != srb->total_xfer_length)
1950                         dprintkdbg(DBG_SG,
1951                                "Inconsistent SRB S/G lengths (Tot=%i, Count=%i) !!\n",
1952                                srb->total_xfer_length, len);
1953         }                              
1954 }
1955
1956
1957 /*
1958  * Compute the next Scatter Gather list index and adjust its length
1959  * and address if necessary; also compute virt_addr
1960  */
1961 static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
1962 {
1963         u8 idx;
1964         struct scatterlist *sg;
1965         struct scsi_cmnd *cmd = srb->cmd;
1966         int segment = cmd->use_sg;
1967         u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
1968         struct SGentry *psge = srb->segment_x + srb->sg_index;
1969         void **virt = srb->virt_map;
1970
1971         dprintkdbg(DBG_0,
1972                 "sg_update_list: Transfered %i of %i bytes, %i remain\n",
1973                 xferred, srb->total_xfer_length, left);
1974         if (xferred == 0) {
1975                 /* nothing to update since we did not transfer any data */
1976                 return;
1977         }
1978
1979         sg_verify_length(srb);
1980         srb->total_xfer_length = left;  /* update remaining count */
1981         for (idx = srb->sg_index; idx < srb->sg_count; idx++) {
1982                 if (xferred >= psge->length) {
1983                         /* Complete SG entries done */
1984                         xferred -= psge->length;
1985                 } else {
1986                         /* Partial SG entry done */
1987                         psge->length -= xferred;
1988                         psge->address += xferred;
1989                         srb->sg_index = idx;
1990                         pci_dma_sync_single_for_device(srb->dcb->
1991                                             acb->dev,
1992                                             srb->sg_bus_addr,
1993                                             SEGMENTX_LEN,
1994                                             PCI_DMA_TODEVICE);
1995                         break;
1996                 }
1997                 psge++;
1998         }
1999         sg_verify_length(srb);
2000
2001         /* we need the corresponding virtual address */
2002         if (!segment) {
2003                 srb->virt_addr += xferred;
2004                 return;
2005         }
2006
2007         /* We have to walk the scatterlist to find it */
2008         sg = (struct scatterlist *)cmd->request_buffer;
2009         idx = 0;
2010         while (segment--) {
2011                 unsigned long mask =
2012                     ~((unsigned long)sg->length - 1) & PAGE_MASK;
2013                 if ((sg_dma_address(sg) & mask) == (psge->address & mask)) {
2014                         srb->virt_addr = virt[idx] + (psge->address & ~PAGE_MASK);
2015                         return;
2016                 }
2017                 ++sg;
2018                 ++idx;
2019         }
2020
2021         dprintkl(KERN_ERR, "sg_update_list: sg_to_virt failed\n");
2022         srb->virt_addr = NULL;
2023 }
2024
2025
2026 /*
2027  * We have transfered a single byte (PIO mode?) and need to update
2028  * the count of bytes remaining (total_xfer_length) and update the sg
2029  * entry to either point to next byte in the current sg entry, or of
2030  * already at the end to point to the start of the next sg entry
2031  */
2032 static void sg_subtract_one(struct ScsiReqBlk *srb)
2033 {
2034         srb->total_xfer_length--;
2035         srb->segment_x[srb->sg_index].length--;
2036         if (srb->total_xfer_length &&
2037             !srb->segment_x[srb->sg_index].length) {
2038                 if (debug_enabled(DBG_PIO))
2039                         printk(" (next segment)");
2040                 srb->sg_index++;
2041                 sg_update_list(srb, srb->total_xfer_length);
2042         }
2043 }
2044
2045
2046 /* 
2047  * cleanup_after_transfer
2048  * 
2049  * Makes sure, DMA and SCSI engine are empty, after the transfer has finished
2050  * KG: Currently called from  StatusPhase1 ()
2051  * Should probably also be called from other places
2052  * Best might be to call it in DataXXPhase0, if new phase will differ 
2053  */
2054 static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
2055                 struct ScsiReqBlk *srb)
2056 {
2057         /*DC395x_write8 (TRM_S1040_DMA_STATUS, FORCEDMACOMP); */
2058         if (DC395x_read16(acb, TRM_S1040_DMA_COMMAND) & 0x0001) {       /* read */
2059                 if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
2060                         clear_fifo(acb, "cleanup/in");
2061                 if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
2062                         DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
2063         } else {                /* write */
2064                 if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
2065                         DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
2066                 if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
2067                         clear_fifo(acb, "cleanup/out");
2068         }
2069         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
2070 }
2071
2072
2073 /*
2074  * Those no of bytes will be transfered w/ PIO through the SCSI FIFO
2075  * Seems to be needed for unknown reasons; could be a hardware bug :-(
2076  */
2077 #define DC395x_LASTPIO 4
2078
2079
2080 static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2081                 u16 *pscsi_status)
2082 {
2083         struct DeviceCtlBlk *dcb = srb->dcb;
2084         u16 scsi_status = *pscsi_status;
2085         u32 d_left_counter = 0;
2086         dprintkdbg(DBG_0, "data_out_phase0: (pid#%li) <%02i-%i>\n",
2087                 srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
2088
2089         /*
2090          * KG: We need to drain the buffers before we draw any conclusions!
2091          * This means telling the DMA to push the rest into SCSI, telling
2092          * SCSI to push the rest to the bus.
2093          * However, the device might have been the one to stop us (phase
2094          * change), and the data in transit just needs to be accounted so
2095          * it can be retransmitted.)
2096          */
2097         /* 
2098          * KG: Stop DMA engine pushing more data into the SCSI FIFO
2099          * If we need more data, the DMA SG list will be freshly set up, anyway
2100          */
2101         dprintkdbg(DBG_PIO, "data_out_phase0: "
2102                 "DMA{fifcnt=0x%02x fifostat=0x%02x} "
2103                 "SCSI{fifocnt=0x%02x cnt=0x%06x status=0x%04x} total=0x%06x\n",
2104                 DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
2105                 DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
2106                 DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
2107                 DC395x_read32(acb, TRM_S1040_SCSI_COUNTER), scsi_status,
2108                 srb->total_xfer_length);
2109         DC395x_write8(acb, TRM_S1040_DMA_CONTROL, STOPDMAXFER | CLRXFIFO);
2110
2111         if (!(srb->state & SRB_XFERPAD)) {
2112                 if (scsi_status & PARITYERROR)
2113                         srb->status |= PARITY_ERROR;
2114
2115                 /*
2116                  * KG: Right, we can't just rely on the SCSI_COUNTER, because this
2117                  * is the no of bytes it got from the DMA engine not the no it 
2118                  * transferred successfully to the device. (And the difference could
2119                  * be as much as the FIFO size, I guess ...)
2120                  */
2121                 if (!(scsi_status & SCSIXFERDONE)) {
2122                         /*
2123                          * when data transfer from DMA FIFO to SCSI FIFO
2124                          * if there was some data left in SCSI FIFO
2125                          */
2126                         d_left_counter =
2127                             (u32)(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
2128                                   0x1F);
2129                         if (dcb->sync_period & WIDE_SYNC)
2130                                 d_left_counter <<= 1;
2131
2132                         dprintkdbg(DBG_KG, "data_out_phase0: FIFO contains %i %s\n"
2133                                 "SCSI{fifocnt=0x%02x cnt=0x%08x} "
2134                                 "DMA{fifocnt=0x%04x cnt=0x%02x ctr=0x%08x}\n",
2135                                 DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
2136                                 (dcb->sync_period & WIDE_SYNC) ? "words" : "bytes",
2137                                 DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
2138                                 DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
2139                                 DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
2140                                 DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
2141                                 DC395x_read32(acb, TRM_S1040_DMA_CXCNT));
2142                 }
2143                 /*
2144                  * calculate all the residue data that not yet transfered
2145                  * SCSI transfer counter + left in SCSI FIFO data
2146                  *
2147                  * .....TRM_S1040_SCSI_COUNTER (24bits)
2148                  * The counter always decrement by one for every SCSI byte transfer.
2149                  * .....TRM_S1040_SCSI_FIFOCNT ( 5bits)
2150                  * The counter is SCSI FIFO offset counter (in units of bytes or! words)
2151                  */
2152                 if (srb->total_xfer_length > DC395x_LASTPIO)
2153                         d_left_counter +=
2154                             DC395x_read32(acb, TRM_S1040_SCSI_COUNTER);
2155
2156                 /* Is this a good idea? */
2157                 /*clear_fifo(acb, "DOP1"); */
2158                 /* KG: What is this supposed to be useful for? WIDE padding stuff? */
2159                 if (d_left_counter == 1 && dcb->sync_period & WIDE_SYNC
2160                     && srb->cmd->request_bufflen % 2) {
2161                         d_left_counter = 0;
2162                         dprintkl(KERN_INFO,
2163                                 "data_out_phase0: Discard 1 byte (0x%02x)\n",
2164                                 scsi_status);
2165                 }
2166                 /*
2167                  * KG: Oops again. Same thinko as above: The SCSI might have been
2168                  * faster than the DMA engine, so that it ran out of data.
2169                  * In that case, we have to do just nothing! 
2170                  * But: Why the interrupt: No phase change. No XFERCNT_2_ZERO. Or?
2171                  */
2172                 /*
2173                  * KG: This is nonsense: We have been WRITING data to the bus
2174                  * If the SCSI engine has no bytes left, how should the DMA engine?
2175                  */
2176                 if (d_left_counter == 0) {
2177                         srb->total_xfer_length = 0;
2178                 } else {
2179                         /*
2180                          * if transfer not yet complete
2181                          * there were some data residue in SCSI FIFO or
2182                          * SCSI transfer counter not empty
2183                          */
2184                         long oldxferred =
2185                             srb->total_xfer_length - d_left_counter;
2186                         const int diff =
2187                             (dcb->sync_period & WIDE_SYNC) ? 2 : 1;
2188                         sg_update_list(srb, d_left_counter);
2189                         /* KG: Most ugly hack! Apparently, this works around a chip bug */
2190                         if ((srb->segment_x[srb->sg_index].length ==
2191                              diff && srb->cmd->use_sg)
2192                             || ((oldxferred & ~PAGE_MASK) ==
2193                                 (PAGE_SIZE - diff))
2194                             ) {
2195                                 dprintkl(KERN_INFO, "data_out_phase0: "
2196                                         "Work around chip bug (%i)?\n", diff);
2197                                 d_left_counter =
2198                                     srb->total_xfer_length - diff;
2199                                 sg_update_list(srb, d_left_counter);
2200                                 /*srb->total_xfer_length -= diff; */
2201                                 /*srb->virt_addr += diff; */
2202                                 /*if (srb->cmd->use_sg) */
2203                                 /*      srb->sg_index++; */
2204                         }
2205                 }
2206         }
2207         if ((*pscsi_status & PHASEMASK) != PH_DATA_OUT) {
2208                 cleanup_after_transfer(acb, srb);
2209         }
2210 }
2211
2212
2213 static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2214                 u16 *pscsi_status)
2215 {
2216         dprintkdbg(DBG_0, "data_out_phase1: (pid#%li) <%02i-%i>\n",
2217                 srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
2218         clear_fifo(acb, "data_out_phase1");
2219         /* do prepare before transfer when data out phase */
2220         data_io_transfer(acb, srb, XFERDATAOUT);
2221 }
2222
2223
2224 static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2225                 u16 *pscsi_status)
2226 {
2227         u16 scsi_status = *pscsi_status;
2228         u32 d_left_counter = 0;
2229         dprintkdbg(DBG_0, "data_in_phase0: (pid#%li) <%02i-%i>\n",
2230                 srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
2231
2232         /*
2233          * KG: DataIn is much more tricky than DataOut. When the device is finished
2234          * and switches to another phase, the SCSI engine should be finished too.
2235          * But: There might still be bytes left in its FIFO to be fetched by the DMA
2236          * engine and transferred to memory.
2237          * We should wait for the FIFOs to be emptied by that (is there any way to 
2238          * enforce this?) and then stop the DMA engine, because it might think, that
2239          * there are more bytes to follow. Yes, the device might disconnect prior to
2240          * having all bytes transferred! 
2241          * Also we should make sure that all data from the DMA engine buffer's really
2242          * made its way to the system memory! Some documentation on this would not
2243          * seem to be a bad idea, actually.
2244          */
2245         if (!(srb->state & SRB_XFERPAD)) {
2246                 if (scsi_status & PARITYERROR) {
2247                         dprintkl(KERN_INFO, "data_in_phase0: (pid#%li) "
2248                                 "Parity Error\n", srb->cmd->pid);
2249                         srb->status |= PARITY_ERROR;
2250                 }
2251                 /*
2252                  * KG: We should wait for the DMA FIFO to be empty ...
2253                  * but: it would be better to wait first for the SCSI FIFO and then the
2254                  * the DMA FIFO to become empty? How do we know, that the device not already
2255                  * sent data to the FIFO in a MsgIn phase, eg.?
2256                  */
2257                 if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80)) {
2258 #if 0
2259                         int ctr = 6000000;
2260                         dprintkl(KERN_DEBUG,
2261                                 "DIP0: Wait for DMA FIFO to flush ...\n");
2262                         /*DC395x_write8  (TRM_S1040_DMA_CONTROL, STOPDMAXFER); */
2263                         /*DC395x_write32 (TRM_S1040_SCSI_COUNTER, 7); */
2264                         /*DC395x_write8  (TRM_S1040_SCSI_COMMAND, SCMD_DMA_IN); */
2265                         while (!
2266                                (DC395x_read16(acb, TRM_S1040_DMA_FIFOSTAT) &
2267                                 0x80) && --ctr);
2268                         if (ctr < 6000000 - 1)
2269                                 dprintkl(KERN_DEBUG
2270                                        "DIP0: Had to wait for DMA ...\n");
2271                         if (!ctr)
2272                                 dprintkl(KERN_ERR,
2273                                        "Deadlock in DIP0 waiting for DMA FIFO empty!!\n");
2274                         /*DC395x_write32 (TRM_S1040_SCSI_COUNTER, 0); */
2275 #endif
2276                         dprintkdbg(DBG_KG, "data_in_phase0: "
2277                                 "DMA{fifocnt=0x%02x fifostat=0x%02x}\n",
2278                                 DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
2279                                 DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT));
2280                 }
2281                 /* Now: Check remainig data: The SCSI counters should tell us ... */
2282                 d_left_counter = DC395x_read32(acb, TRM_S1040_SCSI_COUNTER)
2283                     + ((DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f)
2284                        << ((srb->dcb->sync_period & WIDE_SYNC) ? 1 :
2285                            0));
2286                 dprintkdbg(DBG_KG, "data_in_phase0: "
2287                         "SCSI{fifocnt=0x%02x%s ctr=0x%08x} "
2288                         "DMA{fifocnt=0x%02x fifostat=0x%02x ctr=0x%08x} "
2289                         "Remain{totxfer=%i scsi_fifo+ctr=%i}\n",
2290                         DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
2291                         (srb->dcb->sync_period & WIDE_SYNC) ? "words" : "bytes",
2292                         DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
2293                         DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
2294                         DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
2295                         DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
2296                         srb->total_xfer_length, d_left_counter);
2297 #if DC395x_LASTPIO
2298                 /* KG: Less than or equal to 4 bytes can not be transfered via DMA, it seems. */
2299                 if (d_left_counter
2300                     && srb->total_xfer_length <= DC395x_LASTPIO) {
2301                         /*u32 addr = (srb->segment_x[srb->sg_index].address); */
2302                         /*sg_update_list (srb, d_left_counter); */
2303                         dprintkdbg(DBG_PIO, "data_in_phase0: PIO (%i %s) to "
2304                                 "%p for remaining %i bytes:",
2305                                 DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f,
2306                                 (srb->dcb->sync_period & WIDE_SYNC) ?
2307                                     "words" : "bytes",
2308                                 srb->virt_addr,
2309                                 srb->total_xfer_length);
2310                         if (srb->dcb->sync_period & WIDE_SYNC)
2311                                 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
2312                                               CFG2_WIDEFIFO);
2313                         while (DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) != 0x40) {
2314                                 u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2315                                 *(srb->virt_addr)++ = byte;
2316                                 if (debug_enabled(DBG_PIO))
2317                                         printk(" %02x", byte);
2318                                 d_left_counter--;
2319                                 sg_subtract_one(srb);
2320                         }
2321                         if (srb->dcb->sync_period & WIDE_SYNC) {
2322 #if 1
2323                 /* Read the last byte ... */
2324                                 if (srb->total_xfer_length > 0) {
2325                                         u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2326                                         *(srb->virt_addr)++ = byte;
2327                                         srb->total_xfer_length--;
2328                                         if (debug_enabled(DBG_PIO))
2329                                                 printk(" %02x", byte);
2330                                 }
2331 #endif
2332                                 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
2333                         }
2334                         /*printk(" %08x", *(u32*)(bus_to_virt (addr))); */
2335                         /*srb->total_xfer_length = 0; */
2336                         if (debug_enabled(DBG_PIO))
2337                                 printk("\n");
2338                 }
2339 #endif                          /* DC395x_LASTPIO */
2340
2341 #if 0
2342                 /*
2343                  * KG: This was in DATAOUT. Does it also belong here?
2344                  * Nobody seems to know what counter and fifo_cnt count exactly ...
2345                  */
2346                 if (!(scsi_status & SCSIXFERDONE)) {
2347                         /*
2348                          * when data transfer from DMA FIFO to SCSI FIFO
2349                          * if there was some data left in SCSI FIFO
2350                          */
2351                         d_left_counter =
2352                             (u32)(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
2353                                   0x1F);
2354                         if (srb->dcb->sync_period & WIDE_SYNC)
2355                                 d_left_counter <<= 1;
2356                         /*
2357                          * if WIDE scsi SCSI FIFOCNT unit is word !!!
2358                          * so need to *= 2
2359                          * KG: Seems to be correct ...
2360                          */
2361                 }
2362 #endif
2363                 /* KG: This should not be needed any more! */
2364                 if (d_left_counter == 0
2365                     || (scsi_status & SCSIXFERCNT_2_ZERO)) {
2366 #if 0
2367                         int ctr = 6000000;
2368                         u8 TempDMAstatus;
2369                         do {
2370                                 TempDMAstatus =
2371                                     DC395x_read8(acb, TRM_S1040_DMA_STATUS);
2372                         } while (!(TempDMAstatus & DMAXFERCOMP) && --ctr);
2373                         if (!ctr)
2374                                 dprintkl(KERN_ERR,
2375                                        "Deadlock in DataInPhase0 waiting for DMA!!\n");
2376                         srb->total_xfer_length = 0;
2377 #endif
2378                         srb->total_xfer_length = d_left_counter;
2379                 } else {        /* phase changed */
2380                         /*
2381                          * parsing the case:
2382                          * when a transfer not yet complete 
2383                          * but be disconnected by target
2384                          * if transfer not yet complete
2385                          * there were some data residue in SCSI FIFO or
2386                          * SCSI transfer counter not empty
2387                          */
2388                         sg_update_list(srb, d_left_counter);
2389                 }
2390         }
2391         /* KG: The target may decide to disconnect: Empty FIFO before! */
2392         if ((*pscsi_status & PHASEMASK) != PH_DATA_IN) {
2393                 cleanup_after_transfer(acb, srb);
2394         }
2395 }
2396
2397
2398 static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2399                 u16 *pscsi_status)
2400 {
2401         dprintkdbg(DBG_0, "data_in_phase1: (pid#%li) <%02i-%i>\n",
2402                 srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
2403         data_io_transfer(acb, srb, XFERDATAIN);
2404 }
2405
2406
2407 static void data_io_transfer(struct AdapterCtlBlk *acb, 
2408                 struct ScsiReqBlk *srb, u16 io_dir)
2409 {
2410         struct DeviceCtlBlk *dcb = srb->dcb;
2411         u8 bval;
2412         dprintkdbg(DBG_0,
2413                 "data_io_transfer: (pid#%li) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
2414                 srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun,
2415                 ((io_dir & DMACMD_DIR) ? 'r' : 'w'),
2416                 srb->total_xfer_length, srb->sg_index, srb->sg_count);
2417         if (srb == acb->tmp_srb)
2418                 dprintkl(KERN_ERR, "data_io_transfer: Using tmp_srb!\n");
2419         if (srb->sg_index >= srb->sg_count) {
2420                 /* can't happen? out of bounds error */
2421                 return;
2422         }
2423
2424         if (srb->total_xfer_length > DC395x_LASTPIO) {
2425                 u8 dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
2426                 /*
2427                  * KG: What should we do: Use SCSI Cmd 0x90/0x92?
2428                  * Maybe, even ABORTXFER would be appropriate
2429                  */
2430                 if (dma_status & XFERPENDING) {
2431                         dprintkl(KERN_DEBUG, "data_io_transfer: Xfer pending! "
2432                                 "Expect trouble!\n");
2433                         dump_register_info(acb, dcb, srb);
2434                         DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
2435                 }
2436                 /* clear_fifo(acb, "IO"); */
2437                 /* 
2438                  * load what physical address of Scatter/Gather list table
2439                  * want to be transfer
2440                  */
2441                 srb->state |= SRB_DATA_XFER;
2442                 DC395x_write32(acb, TRM_S1040_DMA_XHIGHADDR, 0);
2443                 if (srb->cmd->use_sg) { /* with S/G */
2444                         io_dir |= DMACMD_SG;
2445                         DC395x_write32(acb, TRM_S1040_DMA_XLOWADDR,
2446                                        srb->sg_bus_addr +
2447                                        sizeof(struct SGentry) *
2448                                        srb->sg_index);
2449                         /* load how many bytes in the sg list table */
2450                         DC395x_write32(acb, TRM_S1040_DMA_XCNT,
2451                                        ((u32)(srb->sg_count -
2452                                               srb->sg_index) << 3));
2453                 } else {        /* without S/G */
2454                         io_dir &= ~DMACMD_SG;
2455                         DC395x_write32(acb, TRM_S1040_DMA_XLOWADDR,
2456                                        srb->segment_x[0].address);
2457                         DC395x_write32(acb, TRM_S1040_DMA_XCNT,
2458                                        srb->segment_x[0].length);
2459                 }
2460                 /* load total transfer length (24bits) max value 16Mbyte */
2461                 DC395x_write32(acb, TRM_S1040_SCSI_COUNTER,
2462                                srb->total_xfer_length);
2463                 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
2464                 if (io_dir & DMACMD_DIR) {      /* read */
2465                         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
2466                                       SCMD_DMA_IN);
2467                         DC395x_write16(acb, TRM_S1040_DMA_COMMAND, io_dir);
2468                 } else {
2469                         DC395x_write16(acb, TRM_S1040_DMA_COMMAND, io_dir);
2470                         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
2471                                       SCMD_DMA_OUT);
2472                 }
2473
2474         }
2475 #if DC395x_LASTPIO
2476         else if (srb->total_xfer_length > 0) {  /* The last four bytes: Do PIO */
2477                 /* 
2478                  * load what physical address of Scatter/Gather list table
2479                  * want to be transfer
2480                  */
2481                 srb->state |= SRB_DATA_XFER;
2482                 /* load total transfer length (24bits) max value 16Mbyte */
2483                 DC395x_write32(acb, TRM_S1040_SCSI_COUNTER,
2484                                srb->total_xfer_length);
2485                 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
2486                 if (io_dir & DMACMD_DIR) {      /* read */
2487                         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
2488                                       SCMD_FIFO_IN);
2489                 } else {        /* write */
2490                         int ln = srb->total_xfer_length;
2491                         if (srb->dcb->sync_period & WIDE_SYNC)
2492                                 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
2493                                      CFG2_WIDEFIFO);
2494                         dprintkdbg(DBG_PIO,
2495                                 "data_io_transfer: PIO %i bytes from %p:",
2496                                 srb->total_xfer_length, srb->virt_addr);
2497
2498                         while (srb->total_xfer_length) {
2499                                 if (debug_enabled(DBG_PIO))
2500                                         printk(" %02x", (unsigned char) *(srb->virt_addr));
2501
2502                                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 
2503                                      *(srb->virt_addr)++);
2504
2505                                 sg_subtract_one(srb);
2506                         }
2507                         if (srb->dcb->sync_period & WIDE_SYNC) {
2508                                 if (ln % 2) {
2509                                         DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
2510                                         if (debug_enabled(DBG_PIO))
2511                                                 printk(" |00");
2512                                 }
2513                                 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
2514                         }
2515                         /*DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, ln); */
2516                         if (debug_enabled(DBG_PIO))
2517                                 printk("\n");
2518                         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
2519                                           SCMD_FIFO_OUT);
2520                 }
2521         }
2522 #endif                          /* DC395x_LASTPIO */
2523         else {          /* xfer pad */
2524                 u8 data = 0, data2 = 0;
2525                 if (srb->sg_count) {
2526                         srb->adapter_status = H_OVER_UNDER_RUN;
2527                         srb->status |= OVER_RUN;
2528                 }
2529                 /*
2530                  * KG: despite the fact that we are using 16 bits I/O ops
2531                  * the SCSI FIFO is only 8 bits according to the docs
2532                  * (we can set bit 1 in 0x8f to serialize FIFO access ...)
2533                  */
2534                 if (dcb->sync_period & WIDE_SYNC) {
2535                         DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 2);
2536                         DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
2537                                       CFG2_WIDEFIFO);
2538                         if (io_dir & DMACMD_DIR) {
2539                                 data = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2540                                 data2 = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2541                         } else {
2542                                 /* Danger, Robinson: If you find KGs
2543                                  * scattered over the wide disk, the driver
2544                                  * or chip is to blame :-( */
2545                                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'K');
2546                                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'G');
2547                         }
2548                         DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
2549                 } else {
2550                         DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
2551                         /* Danger, Robinson: If you find a collection of Ks on your disk
2552                          * something broke :-( */
2553                         if (io_dir & DMACMD_DIR)
2554                                 data = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2555                         else
2556                                 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'K');
2557                 }
2558                 srb->state |= SRB_XFERPAD;
2559                 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
2560                 /* SCSI command */
2561                 bval = (io_dir & DMACMD_DIR) ? SCMD_FIFO_IN : SCMD_FIFO_OUT;
2562                 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, bval);
2563         }
2564 }
2565
2566
2567 static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2568                 u16 *pscsi_status)
2569 {
2570         dprintkdbg(DBG_0, "status_phase0: (pid#%li) <%02i-%i>\n",
2571                 srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
2572         srb->target_status = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2573         srb->end_message = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);      /* get message */
2574         srb->state = SRB_COMPLETED;
2575         *pscsi_status = PH_BUS_FREE;    /*.. initial phase */
2576         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
2577         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
2578 }
2579
2580
2581 static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2582                 u16 *pscsi_status)
2583 {
2584         dprintkdbg(DBG_0, "status_phase1: (pid#%li) <%02i-%i>\n",
2585                 srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
2586         srb->state = SRB_STATUS;
2587         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
2588         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_COMP);
2589 }
2590
2591
2592 /* Check if the message is complete */
2593 static inline u8 msgin_completed(u8 * msgbuf, u32 len)
2594 {
2595         if (*msgbuf == EXTENDED_MESSAGE) {
2596                 if (len < 2)
2597                         return 0;
2598                 if (len < msgbuf[1] + 2)
2599                         return 0;
2600         } else if (*msgbuf >= 0x20 && *msgbuf <= 0x2f)  /* two byte messages */
2601                 if (len < 2)
2602                         return 0;
2603         return 1;
2604 }
2605
2606 /* reject_msg */
2607 static inline void msgin_reject(struct AdapterCtlBlk *acb,
2608                 struct ScsiReqBlk *srb)
2609 {
2610         srb->msgout_buf[0] = MESSAGE_REJECT;
2611         srb->msg_count = 1;
2612         DC395x_ENABLE_MSGOUT;
2613         srb->state &= ~SRB_MSGIN;
2614         srb->state |= SRB_MSGOUT;
2615         dprintkl(KERN_INFO, "msgin_reject: 0x%02x <%02i-%i>\n",
2616                 srb->msgin_buf[0],
2617                 srb->dcb->target_id, srb->dcb->target_lun);
2618 }
2619
2620
2621 static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
2622                 struct DeviceCtlBlk *dcb, u8 tag)
2623 {
2624         struct ScsiReqBlk *srb = NULL;
2625         struct ScsiReqBlk *i;
2626         dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) tag=%i srb=%p\n",
2627                    srb->cmd->pid, tag, srb);
2628
2629         if (!(dcb->tag_mask & (1 << tag)))
2630                 dprintkl(KERN_DEBUG,
2631                         "msgin_qtag: tag_mask=0x%08x does not reserve tag %i!\n",
2632                         dcb->tag_mask, tag);
2633
2634         if (list_empty(&dcb->srb_going_list))
2635                 goto mingx0;
2636         list_for_each_entry(i, &dcb->srb_going_list, list) {
2637                 if (i->tag_number == tag) {
2638                         srb = i;
2639                         break;
2640                 }
2641         }
2642         if (!srb)
2643                 goto mingx0;
2644
2645         dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) <%02i-%i>\n",
2646                 srb->cmd->pid, srb->dcb->target_id, srb->dcb->target_lun);
2647         if (dcb->flag & ABORT_DEV_) {
2648                 /*srb->state = SRB_ABORT_SENT; */
2649                 enable_msgout_abort(acb, srb);
2650         }
2651
2652         if (!(srb->state & SRB_DISCONNECT))
2653                 goto mingx0;
2654
2655         memcpy(srb->msgin_buf, dcb->active_srb->msgin_buf, acb->msg_len);
2656         srb->state |= dcb->active_srb->state;
2657         srb->state |= SRB_DATA_XFER;
2658         dcb->active_srb = srb;
2659         /* How can we make the DORS happy? */
2660         return srb;
2661
2662       mingx0:
2663         srb = acb->tmp_srb;
2664         srb->state = SRB_UNEXPECT_RESEL;
2665         dcb->active_srb = srb;
2666         srb->msgout_buf[0] = MSG_ABORT_TAG;
2667         srb->msg_count = 1;
2668         DC395x_ENABLE_MSGOUT;
2669         dprintkl(KERN_DEBUG, "msgin_qtag: Unknown tag %i - abort\n", tag);
2670         return srb;
2671 }
2672
2673
2674 static inline void reprogram_regs(struct AdapterCtlBlk *acb,
2675                 struct DeviceCtlBlk *dcb)
2676 {
2677         DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id);
2678         DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period);
2679         DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset);
2680         set_xfer_rate(acb, dcb);
2681 }
2682
2683
2684 /* set async transfer mode */
2685 static void msgin_set_async(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
2686 {
2687         struct DeviceCtlBlk *dcb = srb->dcb;
2688         dprintkl(KERN_DEBUG, "msgin_set_async: No sync transfers <%02i-%i>\n",
2689                 dcb->target_id, dcb->target_lun);
2690
2691         dcb->sync_mode &= ~(SYNC_NEGO_ENABLE);
2692         dcb->sync_mode |= SYNC_NEGO_DONE;
2693         /*dcb->sync_period &= 0; */
2694         dcb->sync_offset = 0;
2695         dcb->min_nego_period = 200 >> 2;        /* 200ns <=> 5 MHz */
2696         srb->state &= ~SRB_DO_SYNC_NEGO;
2697         reprogram_regs(acb, dcb);
2698         if ((dcb->sync_mode & WIDE_NEGO_ENABLE)
2699             && !(dcb->sync_mode & WIDE_NEGO_DONE)) {
2700                 build_wdtr(acb, dcb, srb);
2701                 DC395x_ENABLE_MSGOUT;
2702                 dprintkdbg(DBG_0, "msgin_set_async(rej): Try WDTR anyway\n");
2703         }
2704 }
2705
2706
2707 /* set sync transfer mode */
2708 static void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
2709 {
2710         struct DeviceCtlBlk *dcb = srb->dcb;
2711         u8 bval;
2712         int fact;
2713         dprintkdbg(DBG_1, "msgin_set_sync: <%02i> Sync: %ins "
2714                 "(%02i.%01i MHz) Offset %i\n",
2715                 dcb->target_id, srb->msgin_buf[3] << 2,
2716                 (250 / srb->msgin_buf[3]),
2717                 ((250 % srb->msgin_buf[3]) * 10) / srb->msgin_buf[3],
2718                 srb->msgin_buf[4]);
2719
2720         if (srb->msgin_buf[4] > 15)
2721                 srb->msgin_buf[4] = 15;
2722         if (!(dcb->dev_mode & NTC_DO_SYNC_NEGO))
2723                 dcb->sync_offset = 0;
2724         else if (dcb->sync_offset == 0)
2725                 dcb->sync_offset = srb->msgin_buf[4];
2726         if (srb->msgin_buf[4] > dcb->sync_offset)
2727                 srb->msgin_buf[4] = dcb->sync_offset;
2728         else
2729                 dcb->sync_offset = srb->msgin_buf[4];
2730         bval = 0;
2731         while (bval < 7 && (srb->msgin_buf[3] > clock_period[bval]
2732                             || dcb->min_nego_period >
2733                             clock_period[bval]))
2734                 bval++;
2735         if (srb->msgin_buf[3] < clock_period[bval])
2736                 dprintkl(KERN_INFO,
2737                         "msgin_set_sync: Increase sync nego period to %ins\n",
2738                         clock_period[bval] << 2);
2739         srb->msgin_buf[3] = clock_period[bval];
2740         dcb->sync_period &= 0xf0;
2741         dcb->sync_period |= ALT_SYNC | bval;
2742         dcb->min_nego_period = srb->msgin_buf[3];
2743
2744         if (dcb->sync_period & WIDE_SYNC)
2745                 fact = 500;
2746         else
2747                 fact = 250;
2748
2749         dprintkl(KERN_INFO,
2750                 "Target %02i: %s Sync: %ins Offset %i (%02i.%01i MB/s)\n",
2751                 dcb->target_id, (fact == 500) ? "Wide16" : "",
2752                 dcb->min_nego_period << 2, dcb->sync_offset,
2753                 (fact / dcb->min_nego_period),
2754                 ((fact % dcb->min_nego_period) * 10 +
2755                 dcb->min_nego_period / 2) / dcb->min_nego_period);
2756
2757         if (!(srb->state & SRB_DO_SYNC_NEGO)) {
2758                 /* Reply with corrected SDTR Message */
2759                 dprintkl(KERN_DEBUG, "msgin_set_sync: answer w/%ins %i\n",
2760                         srb->msgin_buf[3] << 2, srb->msgin_buf[4]);
2761
2762                 memcpy(srb->msgout_buf, srb->msgin_buf, 5);
2763                 srb->msg_count = 5;
2764                 DC395x_ENABLE_MSGOUT;
2765                 dcb->sync_mode |= SYNC_NEGO_DONE;
2766         } else {
2767                 if ((dcb->sync_mode & WIDE_NEGO_ENABLE)
2768                     && !(dcb->sync_mode & WIDE_NEGO_DONE)) {
2769                         build_wdtr(acb, dcb, srb);
2770                         DC395x_ENABLE_MSGOUT;
2771                         dprintkdbg(DBG_0, "msgin_set_sync: Also try WDTR\n");
2772                 }
2773         }
2774         srb->state &= ~SRB_DO_SYNC_NEGO;
2775         dcb->sync_mode |= SYNC_NEGO_DONE | SYNC_NEGO_ENABLE;
2776
2777         reprogram_regs(acb, dcb);
2778 }
2779
2780
2781 static inline void msgin_set_nowide(struct AdapterCtlBlk *acb,
2782                 struct ScsiReqBlk *srb)
2783 {
2784         struct DeviceCtlBlk *dcb = srb->dcb;
2785         dprintkdbg(DBG_1, "msgin_set_nowide: <%02i>\n", dcb->target_id);
2786
2787         dcb->sync_period &= ~WIDE_SYNC;
2788         dcb->sync_mode &= ~(WIDE_NEGO_ENABLE);
2789         dcb->sync_mode |= WIDE_NEGO_DONE;
2790         srb->state &= ~SRB_DO_WIDE_NEGO;
2791         reprogram_regs(acb, dcb);
2792         if ((dcb->sync_mode & SYNC_NEGO_ENABLE)
2793             && !(dcb->sync_mode & SYNC_NEGO_DONE)) {
2794                 build_sdtr(acb, dcb, srb);
2795                 DC395x_ENABLE_MSGOUT;
2796                 dprintkdbg(DBG_0, "msgin_set_nowide: Rejected. Try SDTR anyway\n");
2797         }
2798 }
2799
2800 static void msgin_set_wide(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
2801 {
2802         struct DeviceCtlBlk *dcb = srb->dcb;
2803         u8 wide = (dcb->dev_mode & NTC_DO_WIDE_NEGO
2804                    && acb->config & HCC_WIDE_CARD) ? 1 : 0;
2805         dprintkdbg(DBG_1, "msgin_set_wide: <%02i>\n", dcb->target_id);
2806
2807         if (srb->msgin_buf[3] > wide)
2808                 srb->msgin_buf[3] = wide;
2809         /* Completed */
2810         if (!(srb->state & SRB_DO_WIDE_NEGO)) {
2811                 dprintkl(KERN_DEBUG,
2812                         "msgin_set_wide: Wide nego initiated <%02i>\n",
2813                         dcb->target_id);
2814                 memcpy(srb->msgout_buf, srb->msgin_buf, 4);
2815                 srb->msg_count = 4;
2816                 srb->state |= SRB_DO_WIDE_NEGO;
2817                 DC395x_ENABLE_MSGOUT;
2818         }
2819
2820         dcb->sync_mode |= (WIDE_NEGO_ENABLE | WIDE_NEGO_DONE);
2821         if (srb->msgin_buf[3] > 0)
2822                 dcb->sync_period |= WIDE_SYNC;
2823         else
2824                 dcb->sync_period &= ~WIDE_SYNC;
2825         srb->state &= ~SRB_DO_WIDE_NEGO;
2826         /*dcb->sync_mode &= ~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE); */
2827         dprintkdbg(DBG_1,
2828                 "msgin_set_wide: Wide (%i bit) negotiated <%02i>\n",
2829                 (8 << srb->msgin_buf[3]), dcb->target_id);
2830         reprogram_regs(acb, dcb);
2831         if ((dcb->sync_mode & SYNC_NEGO_ENABLE)
2832             && !(dcb->sync_mode & SYNC_NEGO_DONE)) {
2833                 build_sdtr(acb, dcb, srb);
2834                 DC395x_ENABLE_MSGOUT;
2835                 dprintkdbg(DBG_0, "msgin_set_wide: Also try SDTR.\n");
2836         }
2837 }
2838
2839
2840 /*
2841  * extended message codes:
2842  *
2843  *      code    description
2844  *
2845  *      02h     Reserved
2846  *      00h     MODIFY DATA  POINTER
2847  *      01h     SYNCHRONOUS DATA TRANSFER REQUEST
2848  *      03h     WIDE DATA TRANSFER REQUEST
2849  *   04h - 7Fh  Reserved
2850  *   80h - FFh  Vendor specific
2851  */
2852 static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2853                 u16 *pscsi_status)
2854 {
2855         struct DeviceCtlBlk *dcb = acb->active_dcb;
2856         dprintkdbg(DBG_0, "msgin_phase0: (pid#%li)\n", srb->cmd->pid);
2857
2858         srb->msgin_buf[acb->msg_len++] = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2859         if (msgin_completed(srb->msgin_buf, acb->msg_len)) {
2860                 /* Now eval the msg */
2861                 switch (srb->msgin_buf[0]) {
2862                 case DISCONNECT:
2863                         srb->state = SRB_DISCONNECT;
2864                         break;
2865
2866                 case SIMPLE_QUEUE_TAG:
2867                 case HEAD_OF_QUEUE_TAG:
2868                 case ORDERED_QUEUE_TAG:
2869                         srb =
2870                             msgin_qtag(acb, dcb,
2871                                               srb->msgin_buf[1]);
2872                         break;
2873
2874                 case MESSAGE_REJECT:
2875                         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
2876                                        DO_CLRATN | DO_DATALATCH);
2877                         /* A sync nego message was rejected ! */
2878                         if (srb->state & SRB_DO_SYNC_NEGO) {
2879                                 msgin_set_async(acb, srb);
2880                                 break;
2881                         }
2882                         /* A wide nego message was rejected ! */
2883                         if (srb->state & SRB_DO_WIDE_NEGO) {
2884                                 msgin_set_nowide(acb, srb);
2885                                 break;
2886                         }
2887                         enable_msgout_abort(acb, srb);
2888                         /*srb->state |= SRB_ABORT_SENT */
2889                         break;
2890
2891                 case EXTENDED_MESSAGE:
2892                         /* SDTR */
2893                         if (srb->msgin_buf[1] == 3
2894                             && srb->msgin_buf[2] == EXTENDED_SDTR) {
2895                                 msgin_set_sync(acb, srb);
2896                                 break;
2897                         }
2898                         /* WDTR */
2899                         if (srb->msgin_buf[1] == 2
2900                             && srb->msgin_buf[2] == EXTENDED_WDTR
2901                             && srb->msgin_buf[3] <= 2) { /* sanity check ... */
2902                                 msgin_set_wide(acb, srb);
2903                                 break;
2904                         }
2905                         msgin_reject(acb, srb);
2906                         break;
2907
2908                 case MSG_IGNOREWIDE:
2909                         /* Discard  wide residual */
2910                         dprintkdbg(DBG_0, "msgin_phase0: Ignore Wide Residual!\n");
2911                         break;
2912
2913                 case COMMAND_COMPLETE:
2914                         /* nothing has to be done */
2915                         break;
2916
2917                 case SAVE_POINTERS:
2918                         /*
2919                          * SAVE POINTER may be ignored as we have the struct
2920                          * ScsiReqBlk* associated with the scsi command.
2921                          */
2922                         dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
2923                                 "SAVE POINTER rem=%i Ignore\n",
2924                                 srb->cmd->pid, srb->total_xfer_length);
2925                         break;
2926
2927                 case RESTORE_POINTERS:
2928                         dprintkdbg(DBG_0, "msgin_phase0: RESTORE POINTER. Ignore\n");
2929                         break;
2930
2931                 case ABORT:
2932                         dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
2933                                 "<%02i-%i> ABORT msg\n",
2934                                 srb->cmd->pid, dcb->target_id,
2935                                 dcb->target_lun);
2936                         dcb->flag |= ABORT_DEV_;
2937                         enable_msgout_abort(acb, srb);
2938                         break;
2939
2940                 default:
2941                         /* reject unknown messages */
2942                         if (srb->msgin_buf[0] & IDENTIFY_BASE) {
2943                                 dprintkdbg(DBG_0, "msgin_phase0: Identify msg\n");
2944                                 srb->msg_count = 1;
2945                                 srb->msgout_buf[0] = dcb->identify_msg;
2946                                 DC395x_ENABLE_MSGOUT;
2947                                 srb->state |= SRB_MSGOUT;
2948                                 /*break; */
2949                         }
2950                         msgin_reject(acb, srb);
2951                 }
2952
2953                 /* Clear counter and MsgIn state */
2954                 srb->state &= ~SRB_MSGIN;
2955                 acb->msg_len = 0;
2956         }
2957         *pscsi_status = PH_BUS_FREE;
2958         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important ... you know! */
2959         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
2960 }
2961
2962
2963 static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2964                 u16 *pscsi_status)
2965 {
2966         dprintkdbg(DBG_0, "msgin_phase1: (pid#%li)\n", srb->cmd->pid);
2967         clear_fifo(acb, "msgin_phase1");
2968         DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
2969         if (!(srb->state & SRB_MSGIN)) {
2970                 srb->state &= ~SRB_DISCONNECT;
2971                 srb->state |= SRB_MSGIN;
2972         }
2973         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
2974         /* SCSI command */
2975         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_IN);
2976 }
2977
2978
2979 static void nop0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2980                 u16 *pscsi_status)
2981 {
2982 }
2983
2984
2985 static void nop1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2986                 u16 *pscsi_status)
2987 {
2988 }
2989
2990
2991 static void set_xfer_rate(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
2992 {
2993         struct DeviceCtlBlk *i;
2994
2995         /* set all lun device's  period, offset */
2996         if (dcb->identify_msg & 0x07)
2997                 return;
2998
2999         if (acb->scan_devices) {
3000                 current_sync_offset = dcb->sync_offset;
3001                 return;
3002         }
3003
3004         list_for_each_entry(i, &acb->dcb_list, list)
3005                 if (i->target_id == dcb->target_id) {
3006                         i->sync_period = dcb->sync_period;
3007                         i->sync_offset = dcb->sync_offset;
3008                         i->sync_mode = dcb->sync_mode;
3009                         i->min_nego_period = dcb->min_nego_period;
3010                 }
3011 }
3012
3013
3014 static void disconnect(struct AdapterCtlBlk *acb)
3015 {
3016         struct DeviceCtlBlk *dcb = acb->active_dcb;
3017         struct ScsiReqBlk *srb;
3018
3019         if (!dcb) {
3020                 dprintkl(KERN_ERR, "disconnect: No such device\n");
3021                 udelay(500);
3022                 /* Suspend queue for a while */
3023                 acb->scsi_host->last_reset =
3024                     jiffies + HZ / 2 +
3025                     HZ * acb->eeprom.delay_time;
3026                 clear_fifo(acb, "disconnectEx");
3027                 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT);
3028                 return;
3029         }
3030         srb = dcb->active_srb;
3031         acb->active_dcb = NULL;
3032         dprintkdbg(DBG_0, "disconnect: (pid#%li)\n", srb->cmd->pid);
3033
3034         srb->scsi_phase = PH_BUS_FREE;  /* initial phase */
3035         clear_fifo(acb, "disconnect");
3036         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT);
3037         if (srb->state & SRB_UNEXPECT_RESEL) {
3038                 dprintkl(KERN_ERR,
3039                         "disconnect: Unexpected reselection <%02i-%i>\n",
3040                         dcb->target_id, dcb->target_lun);
3041                 srb->state = 0;
3042                 waiting_process_next(acb);
3043         } else if (srb->state & SRB_ABORT_SENT) {
3044                 dcb->flag &= ~ABORT_DEV_;
3045                 acb->scsi_host->last_reset = jiffies + HZ / 2 + 1;
3046                 dprintkl(KERN_ERR, "disconnect: SRB_ABORT_SENT\n");
3047                 doing_srb_done(acb, DID_ABORT, srb->cmd, 1);
3048                 waiting_process_next(acb);
3049         } else {
3050                 if ((srb->state & (SRB_START_ + SRB_MSGOUT))
3051                     || !(srb->
3052                          state & (SRB_DISCONNECT + SRB_COMPLETED))) {
3053                         /*
3054                          * Selection time out 
3055                          * SRB_START_ || SRB_MSGOUT || (!SRB_DISCONNECT && !SRB_COMPLETED)
3056                          */
3057                         /* Unexp. Disc / Sel Timeout */
3058                         if (srb->state != SRB_START_
3059                             && srb->state != SRB_MSGOUT) {
3060                                 srb->state = SRB_READY;
3061                                 dprintkl(KERN_DEBUG,
3062                                         "disconnect: (pid#%li) Unexpected\n",
3063                                         srb->cmd->pid);
3064                                 srb->target_status = SCSI_STAT_SEL_TIMEOUT;
3065                                 goto disc1;
3066                         } else {
3067                                 /* Normal selection timeout */
3068                                 dprintkdbg(DBG_KG, "disconnect: (pid#%li) "
3069                                         "<%02i-%i> SelTO\n", srb->cmd->pid,
3070                                         dcb->target_id, dcb->target_lun);
3071                                 if (srb->retry_count++ > DC395x_MAX_RETRIES
3072                                     || acb->scan_devices) {
3073                                         srb->target_status =
3074                                             SCSI_STAT_SEL_TIMEOUT;
3075                                         goto disc1;
3076                                 }
3077                                 free_tag(dcb, srb);
3078                                 srb_going_to_waiting_move(dcb, srb);
3079                                 dprintkdbg(DBG_KG,
3080                                         "disconnect: (pid#%li) Retry\n",
3081                                         srb->cmd->pid);
3082                                 waiting_set_timer(acb, HZ / 20);
3083                         }
3084                 } else if (srb->state & SRB_DISCONNECT) {
3085                         u8 bval = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
3086                         /*
3087                          * SRB_DISCONNECT (This is what we expect!)
3088                          */
3089                         if (bval & 0x40) {
3090                                 dprintkdbg(DBG_0, "disconnect: SCSI bus stat "
3091                                         " 0x%02x: ACK set! Other controllers?\n",
3092                                         bval);
3093                                 /* It could come from another initiator, therefore don't do much ! */
3094                         } else
3095                                 waiting_process_next(acb);
3096                 } else if (srb->state & SRB_COMPLETED) {
3097                       disc1:
3098                         /*
3099                          ** SRB_COMPLETED
3100                          */
3101                         free_tag(dcb, srb);
3102                         dcb->active_srb = NULL;
3103                         srb->state = SRB_FREE;
3104                         srb_done(acb, dcb, srb);
3105                 }
3106         }
3107 }
3108
3109
3110 static void reselect(struct AdapterCtlBlk *acb)
3111 {
3112         struct DeviceCtlBlk *dcb = acb->active_dcb;
3113         struct ScsiReqBlk *srb = NULL;
3114         u16 rsel_tar_lun_id;
3115         u8 id, lun;
3116         u8 arblostflag = 0;
3117         dprintkdbg(DBG_0, "reselect: acb=%p\n", acb);
3118
3119         clear_fifo(acb, "reselect");
3120         /*DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT | DO_DATALATCH); */
3121         /* Read Reselected Target ID and LUN */
3122         rsel_tar_lun_id = DC395x_read16(acb, TRM_S1040_SCSI_TARGETID);
3123         if (dcb) {              /* Arbitration lost but Reselection win */
3124                 srb = dcb->active_srb;
3125                 if (!srb) {
3126                         dprintkl(KERN_DEBUG, "reselect: Arb lost Resel won, "
3127                                 "but active_srb == NULL\n");
3128                         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
3129                         return;
3130                 }
3131                 /* Why the if ? */
3132                 if (!acb->scan_devices) {
3133                         dprintkdbg(DBG_KG, "reselect: (pid#%li) <%02i-%i> "
3134                                 "Arb lost but Resel win rsel=%i stat=0x%04x\n",
3135                                 srb->cmd->pid, dcb->target_id,
3136                                 dcb->target_lun, rsel_tar_lun_id,
3137                                 DC395x_read16(acb, TRM_S1040_SCSI_STATUS));
3138                         arblostflag = 1;
3139                         /*srb->state |= SRB_DISCONNECT; */
3140
3141                         srb->state = SRB_READY;
3142                         free_tag(dcb, srb);
3143                         srb_going_to_waiting_move(dcb, srb);
3144                         waiting_set_timer(acb, HZ / 20);
3145
3146                         /* return; */
3147                 }
3148         }
3149         /* Read Reselected Target Id and LUN */
3150         if (!(rsel_tar_lun_id & (IDENTIFY_BASE << 8)))
3151                 dprintkl(KERN_DEBUG, "reselect: Expects identify msg. "
3152                         "Got %i!\n", rsel_tar_lun_id);
3153         id = rsel_tar_lun_id & 0xff;
3154         lun = (rsel_tar_lun_id >> 8) & 7;
3155         dcb = find_dcb(acb, id, lun);
3156         if (!dcb) {
3157                 dprintkl(KERN_ERR, "reselect: From non existent device "
3158                         "<%02i-%i>\n", id, lun);
3159                 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);      /* it's important for atn stop */
3160                 return;
3161         }
3162         acb->active_dcb = dcb;
3163
3164         if (!(dcb->dev_mode & NTC_DO_DISCONNECT))
3165                 dprintkl(KERN_DEBUG, "reselect: in spite of forbidden "
3166                         "disconnection? <%02i-%i>\n",
3167                         dcb->target_id, dcb->target_lun);
3168
3169         if (dcb->sync_mode & EN_TAG_QUEUEING /*&& !arblostflag */) {
3170                 srb = acb->tmp_srb;
3171                 dcb->active_srb = srb;
3172         } else {
3173                 /* There can be only one! */
3174                 srb = dcb->active_srb;
3175                 if (!srb || !(srb->state & SRB_DISCONNECT)) {
3176                         /*
3177                          * abort command
3178                          */
3179                         dprintkl(KERN_DEBUG,
3180                                 "reselect: w/o disconnected cmds <%02i-%i>\n",
3181                                 dcb->target_id, dcb->target_lun);
3182                         srb = acb->tmp_srb;
3183                         srb->state = SRB_UNEXPECT_RESEL;
3184                         dcb->active_srb = srb;
3185                         enable_msgout_abort(acb, srb);
3186                 } else {
3187                         if (dcb->flag & ABORT_DEV_) {
3188                                 /*srb->state = SRB_ABORT_SENT; */
3189                                 enable_msgout_abort(acb, srb);
3190                         } else
3191                                 srb->state = SRB_DATA_XFER;
3192
3193                 }
3194         }
3195         srb->scsi_phase = PH_BUS_FREE;  /* initial phase */
3196
3197         /* Program HA ID, target ID, period and offset */
3198         dprintkdbg(DBG_0, "reselect: select <%i>\n", dcb->target_id);
3199         DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id);     /* host   ID */
3200         DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id);            /* target ID */
3201         DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset);            /* offset    */
3202         DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period);              /* sync period, wide */
3203         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);              /* it's important for atn stop */
3204         /* SCSI command */
3205         DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
3206 }
3207
3208
3209 static inline u8 tagq_blacklist(char *name)
3210 {
3211 #ifndef DC395x_NO_TAGQ
3212 #if 0
3213         u8 i;
3214         for (i = 0; i < BADDEVCNT; i++)
3215                 if (memcmp(name, DC395x_baddevname1[i], 28) == 0)
3216                         return 1;
3217 #endif
3218         return 0;
3219 #else
3220         return 1;
3221 #endif
3222 }
3223
3224
3225 static void disc_tagq_set(struct DeviceCtlBlk *dcb, struct ScsiInqData *ptr)
3226 {
3227         /* Check for SCSI format (ANSI and Response data format) */
3228         if ((ptr->Vers & 0x07) >= 2 || (ptr->RDF & 0x0F) == 2) {
3229                 if ((ptr->Flags & SCSI_INQ_CMDQUEUE)
3230                     && (dcb->dev_mode & NTC_DO_TAG_QUEUEING) &&
3231                     /*(dcb->dev_mode & NTC_DO_DISCONNECT) */
3232                     /* ((dcb->dev_type == TYPE_DISK) 
3233                        || (dcb->dev_type == TYPE_MOD)) && */
3234                     !tagq_blacklist(((char *)ptr) + 8)) {
3235                         if (dcb->max_command == 1)
3236                                 dcb->max_command =
3237                                     dcb->acb->tag_max_num;
3238                         dcb->sync_mode |= EN_TAG_QUEUEING;
3239                         /*dcb->tag_mask = 0; */
3240                 } else
3241                         dcb->max_command = 1;
3242         }
3243 }
3244
3245
3246 static void add_dev(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
3247                 struct ScsiInqData *ptr)
3248 {
3249         u8 bval1 = ptr->DevType & SCSI_DEVTYPE;
3250         dcb->dev_type = bval1;
3251         /* if (bval1 == TYPE_DISK || bval1 == TYPE_MOD) */
3252         disc_tagq_set(dcb, ptr);
3253 }
3254
3255
3256 /* unmap mapped pci regions from SRB */
3257 static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
3258 {
3259         struct scsi_cmnd *cmd = srb->cmd;
3260         enum dma_data_direction dir = cmd->sc_data_direction;
3261         if (cmd->use_sg && dir != PCI_DMA_NONE) {
3262                 int i;
3263                 /* unmap DC395x SG list */
3264                 dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n",
3265                         srb->sg_bus_addr, SEGMENTX_LEN);
3266                 pci_unmap_single(acb->dev, srb->sg_bus_addr,
3267                                  SEGMENTX_LEN,
3268                                  PCI_DMA_TODEVICE);
3269                 dprintkdbg(DBG_SG, "pci_unmap_srb: segs=%i buffer=%p\n",
3270                         cmd->use_sg, cmd->request_buffer);
3271                 /* unmap the sg segments */
3272                 for (i = 0; i < srb->sg_count; i++)
3273                         kunmap(virt_to_page(srb->virt_map[i]));
3274                 pci_unmap_sg(acb->dev,
3275                              (struct scatterlist *)cmd->request_buffer,
3276                              cmd->use_sg, dir);
3277         } else if (cmd->request_buffer && dir != PCI_DMA_NONE) {
3278                 dprintkdbg(DBG_SG, "pci_unmap_srb: buffer=%08x(%05x)\n",
3279                         srb->segment_x[0].address, cmd->request_bufflen);
3280                 pci_unmap_single(acb->dev, srb->segment_x[0].address,
3281                                  cmd->request_bufflen, dir);
3282         }
3283 }
3284
3285
3286 /* unmap mapped pci sense buffer from SRB */
3287 static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb,
3288                 struct ScsiReqBlk *srb)
3289 {
3290         if (!(srb->flag & AUTO_REQSENSE))
3291                 return;
3292         /* Unmap sense buffer */
3293         dprintkdbg(DBG_SG, "pci_unmap_srb_sense: buffer=%08x\n",
3294                srb->segment_x[0].address);
3295         pci_unmap_single(acb->dev, srb->segment_x[0].address,
3296                          srb->segment_x[0].length, PCI_DMA_FROMDEVICE);
3297         /* Restore SG stuff */
3298         srb->total_xfer_length = srb->xferred;
3299         srb->segment_x[0].address =
3300             srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address;
3301         srb->segment_x[0].length =
3302             srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length;
3303 }
3304
3305
3306 /*
3307  * Complete execution of a SCSI command
3308  * Signal completion to the generic SCSI driver  
3309  */
3310 static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
3311                 struct ScsiReqBlk *srb)
3312 {
3313         u8 tempcnt, status;
3314         struct scsi_cmnd *cmd = srb->cmd;
3315         struct ScsiInqData *ptr;
3316         enum dma_data_direction dir = cmd->sc_data_direction;
3317
3318         if (cmd->use_sg) {
3319                 struct scatterlist* sg = (struct scatterlist *)cmd->request_buffer;
3320                 ptr = (struct ScsiInqData *)(srb->virt_map[0] + sg->offset);
3321         } else {
3322                 ptr = (struct ScsiInqData *)(cmd->request_buffer);
3323         }
3324
3325         dprintkdbg(DBG_1, "srb_done: (pid#%li) <%02i-%i>\n", srb->cmd->pid,
3326                 srb->cmd->device->id, srb->cmd->device->lun);
3327         dprintkdbg(DBG_SG, "srb_done: srb=%p sg=%i(%i/%i) buf=%p addr=%p\n",
3328                 srb, cmd->use_sg, srb->sg_index, srb->sg_count,
3329                 cmd->request_buffer, ptr);
3330         status = srb->target_status;
3331         if (srb->flag & AUTO_REQSENSE) {
3332                 dprintkdbg(DBG_0, "srb_done: AUTO_REQSENSE1\n");
3333                 pci_unmap_srb_sense(acb, srb);
3334                 /*
3335                  ** target status..........................
3336                  */
3337                 srb->flag &= ~AUTO_REQSENSE;
3338                 srb->adapter_status = 0;
3339                 srb->target_status = CHECK_CONDITION << 1;
3340                 if (debug_enabled(DBG_1)) {
3341                         switch (cmd->sense_buffer[2] & 0x0f) {
3342                         case NOT_READY:
3343                                 dprintkl(KERN_DEBUG,
3344                                      "ReqSense: NOT_READY cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3345                                      cmd->cmnd[0], dcb->target_id,
3346                                      dcb->target_lun, status, acb->scan_devices);
3347                                 break;
3348                         case UNIT_ATTENTION:
3349                                 dprintkl(KERN_DEBUG,
3350                                      "ReqSense: UNIT_ATTENTION cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3351                                      cmd->cmnd[0], dcb->target_id,
3352                                      dcb->target_lun, status, acb->scan_devices);
3353                                 break;
3354                         case ILLEGAL_REQUEST:
3355                                 dprintkl(KERN_DEBUG,
3356                                      "ReqSense: ILLEGAL_REQUEST cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3357                                      cmd->cmnd[0], dcb->target_id,
3358                                      dcb->target_lun, status, acb->scan_devices);
3359                                 break;
3360                         case MEDIUM_ERROR:
3361                                 dprintkl(KERN_DEBUG,
3362                                      "ReqSense: MEDIUM_ERROR cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3363                                      cmd->cmnd[0], dcb->target_id,
3364                                      dcb->target_lun, status, acb->scan_devices);
3365                                 break;
3366                         case HARDWARE_ERROR:
3367                                 dprintkl(KERN_DEBUG,
3368                                      "ReqSense: HARDWARE_ERROR cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3369                                      cmd->cmnd[0], dcb->target_id,
3370                                      dcb->target_lun, status, acb->scan_devices);
3371                                 break;
3372                         }
3373                         if (cmd->sense_buffer[7] >= 6)
3374                                 printk("sense=0x%02x ASC=0x%02x ASCQ=0x%02x "
3375                                         "(0x%08x 0x%08x)\n",
3376                                         cmd->sense_buffer[2], cmd->sense_buffer[12],
3377                                         cmd->sense_buffer[13],
3378                                         *((unsigned int *)(cmd->sense_buffer + 3)),
3379                                         *((unsigned int *)(cmd->sense_buffer + 8)));
3380                         else
3381                                 printk("sense=0x%02x No ASC/ASCQ (0x%08x)\n",
3382                                         cmd->sense_buffer[2],
3383                                         *((unsigned int *)(cmd->sense_buffer + 3)));
3384                 }
3385
3386                 if (status == (CHECK_CONDITION << 1)) {
3387                         cmd->result = DID_BAD_TARGET << 16;
3388                         goto ckc_e;
3389                 }
3390                 dprintkdbg(DBG_0, "srb_done: AUTO_REQSENSE2\n");
3391
3392                 if (srb->total_xfer_length
3393                     && srb->total_xfer_length >= cmd->underflow)
3394                         cmd->result =
3395                             MK_RES_LNX(DRIVER_SENSE, DID_OK,
3396                                        srb->end_message, CHECK_CONDITION);
3397                 /*SET_RES_DID(cmd->result,DID_OK) */
3398                 else
3399                         cmd->result =
3400                             MK_RES_LNX(DRIVER_SENSE, DID_OK,
3401                                        srb->end_message, CHECK_CONDITION);
3402
3403                 goto ckc_e;
3404         }
3405
3406 /*************************************************************/
3407         if (status) {
3408                 /*
3409                  * target status..........................
3410                  */
3411                 if (status_byte(status) == CHECK_CONDITION) {
3412                         request_sense(acb, dcb, srb);
3413                         return;
3414                 } else if (status_byte(status) == QUEUE_FULL) {
3415                         tempcnt = (u8)list_size(&dcb->srb_going_list);
3416                         dprintkl(KERN_INFO, "QUEUE_FULL for dev <%02i-%i> with %i cmnds\n",
3417                              dcb->target_id, dcb->target_lun, tempcnt);
3418                         if (tempcnt > 1)
3419                                 tempcnt--;
3420                         dcb->max_command = tempcnt;
3421                         free_tag(dcb, srb);
3422                         srb_going_to_waiting_move(dcb, srb);
3423                         waiting_set_timer(acb, HZ / 20);
3424                         srb->adapter_status = 0;
3425                         srb->target_status = 0;
3426                         return;
3427                 } else if (status == SCSI_STAT_SEL_TIMEOUT) {
3428                         srb->adapter_status = H_SEL_TIMEOUT;
3429                         srb->target_status = 0;
3430                         cmd->result = DID_NO_CONNECT << 16;
3431                 } else {
3432                         srb->adapter_status = 0;
3433                         SET_RES_DID(cmd->result, DID_ERROR);
3434                         SET_RES_MSG(cmd->result, srb->end_message);
3435                         SET_RES_TARGET(cmd->result, status);
3436
3437                 }
3438         } else {
3439                 /*
3440                  ** process initiator status..........................
3441                  */
3442                 status = srb->adapter_status;
3443                 if (status & H_OVER_UNDER_RUN) {
3444                         srb->target_status = 0;
3445                         SET_RES_DID(cmd->result, DID_OK);
3446                         SET_RES_MSG(cmd->result, srb->end_message);
3447                 } else if (srb->status & PARITY_ERROR) {
3448                         SET_RES_DID(cmd->result, DID_PARITY);
3449                         SET_RES_MSG(cmd->result, srb->end_message);
3450                 } else {        /* No error */
3451
3452                         srb->adapter_status = 0;
3453                         srb->target_status = 0;
3454                         SET_RES_DID(cmd->result, DID_OK);
3455                 }
3456         }
3457
3458         if (dir != PCI_DMA_NONE) {
3459                 if (cmd->use_sg)
3460                         pci_dma_sync_sg_for_cpu(acb->dev,
3461                                         (struct scatterlist *)cmd->
3462                                         request_buffer, cmd->use_sg, dir);
3463                 else if (cmd->request_buffer)
3464                         pci_dma_sync_single_for_cpu(acb->dev,
3465                                             srb->segment_x[0].address,
3466                                             cmd->request_bufflen, dir);
3467         }
3468
3469         if ((cmd->result & RES_DID) == 0 && cmd->cmnd[0] == INQUIRY
3470             && cmd->cmnd[2] == 0 && cmd->request_bufflen >= 8
3471             && dir != PCI_DMA_NONE && ptr && (ptr->Vers & 0x07) >= 2)
3472                 dcb->inquiry7 = ptr->Flags;
3473 /* Check Error Conditions */
3474       ckc_e:
3475
3476         /*if( srb->cmd->cmnd[0] == INQUIRY && */
3477         /*  (host_byte(cmd->result) == DID_OK || status_byte(cmd->result) & CHECK_CONDITION) ) */
3478         if (cmd->cmnd[0] == INQUIRY && (cmd->result == (DID_OK << 16)
3479                                          || status_byte(cmd->
3480                                                         result) &
3481                                          CHECK_CONDITION)) {
3482
3483                 if (!dcb->init_tcq_flag) {
3484                         add_dev(acb, dcb, ptr);
3485                         dcb->init_tcq_flag = 1;
3486                 }
3487
3488         }
3489
3490
3491         /* Here is the info for Doug Gilbert's sg3 ... */
3492         cmd->resid = srb->total_xfer_length;
3493         /* This may be interpreted by sb. or not ... */
3494         cmd->SCp.this_residual = srb->total_xfer_length;
3495         cmd->SCp.buffers_residual = 0;
3496         if (debug_enabled(DBG_KG)) {
3497                 if (srb->total_xfer_length)
3498                         dprintkdbg(DBG_KG, "srb_done: (pid#%li) <%02i-%i> "
3499                                 "cmnd=0x%02x Missed %i bytes\n",
3500                                 cmd->pid, cmd->device->id, cmd->device->lun,
3501                                 cmd->cmnd[0], srb->total_xfer_length);
3502         }
3503
3504         srb_going_remove(dcb, srb);
3505         /* Add to free list */
3506         if (srb == acb->tmp_srb)
3507                 dprintkl(KERN_ERR, "srb_done: ERROR! Completed cmd with tmp_srb\n");
3508         else {
3509                 dprintkdbg(DBG_0, "srb_done: (pid#%li) done result=0x%08x\n",
3510                         cmd->pid, cmd->result);
3511                 srb_free_insert(acb, srb);
3512         }
3513         pci_unmap_srb(acb, srb);
3514
3515         cmd->scsi_done(cmd);
3516         waiting_process_next(acb);
3517 }
3518
3519
3520 /* abort all cmds in our queues */
3521 static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
3522                 struct scsi_cmnd *cmd, u8 force)
3523 {
3524         struct DeviceCtlBlk *dcb;
3525         dprintkl(KERN_INFO, "doing_srb_done: pids ");
3526
3527         list_for_each_entry(dcb, &acb->dcb_list, list) {
3528                 struct ScsiReqBlk *srb;
3529                 struct ScsiReqBlk *tmp;
3530                 struct scsi_cmnd *p;
3531
3532                 list_for_each_entry_safe(srb, tmp, &dcb->srb_going_list, list) {
3533                         enum dma_data_direction dir;
3534                         int result;
3535
3536                         p = srb->cmd;
3537                         dir = p->sc_data_direction;
3538                         result = MK_RES(0, did_flag, 0, 0);
3539                         printk("G:%li(%02i-%i) ", p->pid,
3540                                p->device->id, p->device->lun);
3541                         srb_going_remove(dcb, srb);
3542                         free_tag(dcb, srb);
3543                         srb_free_insert(acb, srb);
3544                         p->result = result;
3545                         pci_unmap_srb_sense(acb, srb);
3546                         pci_unmap_srb(acb, srb);
3547                         if (force) {
3548                                 /* For new EH, we normally don't need to give commands back,
3549                                  * as they all complete or all time out */
3550                                 p->scsi_done(p);
3551                         }
3552                 }
3553                 if (!list_empty(&dcb->srb_going_list))
3554                         dprintkl(KERN_DEBUG, 
3555                                "How could the ML send cmnds to the Going queue? <%02i-%i>\n",
3556                                dcb->target_id, dcb->target_lun);
3557                 if (dcb->tag_mask)
3558                         dprintkl(KERN_DEBUG,
3559                                "tag_mask for <%02i-%i> should be empty, is %08x!\n",
3560                                dcb->target_id, dcb->target_lun,
3561                                dcb->tag_mask);
3562
3563                 /* Waiting queue */
3564                 list_for_each_entry_safe(srb, tmp, &dcb->srb_waiting_list, list) {
3565                         int result;
3566                         p = srb->cmd;
3567
3568                         result = MK_RES(0, did_flag, 0, 0);
3569                         printk("W:%li<%02i-%i>", p->pid, p->device->id,
3570                                p->device->lun);
3571                         srb_waiting_remove(dcb, srb);
3572                         srb_free_insert(acb, srb);
3573                         p->result = result;
3574                         pci_unmap_srb_sense(acb, srb);
3575                         pci_unmap_srb(acb, srb);
3576                         if (force) {
3577                                 /* For new EH, we normally don't need to give commands back,
3578                                  * as they all complete or all time out */
3579                                 cmd->scsi_done(cmd);
3580                         }
3581                 }
3582                 if (!list_empty(&dcb->srb_waiting_list))
3583                         dprintkl(KERN_DEBUG, "ML queued %i cmnds again to <%02i-%i>\n",
3584                              list_size(&dcb->srb_waiting_list), dcb->target_id,
3585                              dcb->target_lun);
3586                 dcb->flag &= ~ABORT_DEV_;
3587         }
3588         printk("\n");
3589 }
3590
3591
3592 static void reset_scsi_bus(struct AdapterCtlBlk *acb)
3593 {
3594         dprintkdbg(DBG_0, "reset_scsi_bus: acb=%p\n", acb);
3595         acb->acb_flag |= RESET_DEV;     /* RESET_DETECT, RESET_DONE, RESET_DEV */
3596         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_RSTSCSI);
3597
3598         while (!(DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS) & INT_SCSIRESET))
3599                 /* nothing */;
3600 }
3601
3602
3603 static void set_basic_config(struct AdapterCtlBlk *acb)
3604 {
3605         u8 bval;
3606         u16 wval;
3607         DC395x_write8(acb, TRM_S1040_SCSI_TIMEOUT, acb->sel_timeout);
3608         if (acb->config & HCC_PARITY)
3609                 bval = PHASELATCH | INITIATOR | BLOCKRST | PARITYCHECK;
3610         else
3611                 bval = PHASELATCH | INITIATOR | BLOCKRST;
3612
3613         DC395x_write8(acb, TRM_S1040_SCSI_CONFIG0, bval);
3614
3615         /* program configuration 1: Act_Neg (+ Act_Neg_Enh? + Fast_Filter? + DataDis?) */
3616         DC395x_write8(acb, TRM_S1040_SCSI_CONFIG1, 0x03);       /* was 0x13: default */
3617         /* program Host ID                  */
3618         DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id);
3619         /* set ansynchronous transfer       */
3620         DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, 0x00);
3621         /* Turn LED control off */
3622         wval = DC395x_read16(acb, TRM_S1040_GEN_CONTROL) & 0x7F;
3623         DC395x_write16(acb, TRM_S1040_GEN_CONTROL, wval);
3624         /* DMA config          */
3625         wval = DC395x_read16(acb, TRM_S1040_DMA_CONFIG) & ~DMA_FIFO_CTRL;
3626         wval |=
3627             DMA_FIFO_HALF_HALF | DMA_ENHANCE /*| DMA_MEM_MULTI_READ */ ;
3628         DC395x_write16(acb, TRM_S1040_DMA_CONFIG, wval);
3629         /* Clear pending interrupt status */
3630         DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
3631         /* Enable SCSI interrupt    */
3632         DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0x7F);
3633         DC395x_write8(acb, TRM_S1040_DMA_INTEN, EN_SCSIINTR | EN_DMAXFERERROR
3634                       /*| EN_DMAXFERABORT | EN_DMAXFERCOMP | EN_FORCEDMACOMP */
3635                       );
3636 }
3637
3638
3639 static void scsi_reset_detect(struct AdapterCtlBlk *acb)
3640 {
3641         dprintkl(KERN_INFO, "scsi_reset_detect: acb=%p\n", acb);
3642         /* delay half a second */
3643         if (timer_pending(&acb->waiting_timer))
3644                 del_timer(&acb->waiting_timer);
3645
3646         DC395x_write8(acb, TRM_S1040_SCSI_CONTROL, DO_RSTMODULE);
3647         DC395x_write8(acb, TRM_S1040_DMA_CONTROL, DMARESETMODULE);
3648         /*DC395x_write8(acb, TRM_S1040_DMA_CONTROL,STOPDMAXFER); */
3649         udelay(500);
3650         /* Maybe we locked up the bus? Then lets wait even longer ... */
3651         acb->scsi_host->last_reset =
3652             jiffies + 5 * HZ / 2 +
3653             HZ * acb->eeprom.delay_time;
3654
3655         clear_fifo(acb, "scsi_reset_detect");
3656         set_basic_config(acb);
3657         /*1.25 */
3658         /*DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT); */
3659
3660         if (acb->acb_flag & RESET_DEV) {        /* RESET_DETECT, RESET_DONE, RESET_DEV */
3661                 acb->acb_flag |= RESET_DONE;
3662         } else {
3663                 acb->acb_flag |= RESET_DETECT;
3664                 reset_dev_param(acb);
3665                 doing_srb_done(acb, DID_RESET, NULL, 1);
3666                 /*DC395x_RecoverSRB( acb ); */
3667                 acb->active_dcb = NULL;
3668                 acb->acb_flag = 0;
3669                 waiting_process_next(acb);
3670         }
3671 }
3672
3673
3674 static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
3675                 struct ScsiReqBlk *srb)
3676 {
3677         struct scsi_cmnd *cmd = srb->cmd;
3678         dprintkdbg(DBG_1, "request_sense: (pid#%li) <%02i-%i>\n",
3679                 cmd->pid, cmd->device->id, cmd->device->lun);
3680
3681         srb->flag |= AUTO_REQSENSE;
3682         srb->adapter_status = 0;
3683         srb->target_status = 0;
3684
3685         /* KG: Can this prevent crap sense data ? */
3686         memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
3687
3688         /* Save some data */
3689         srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address =
3690             srb->segment_x[0].address;
3691         srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length =
3692             srb->segment_x[0].length;
3693         srb->xferred = srb->total_xfer_length;
3694         /* srb->segment_x : a one entry of S/G list table */
3695         srb->total_xfer_length = sizeof(cmd->sense_buffer);
3696         srb->segment_x[0].length = sizeof(cmd->sense_buffer);
3697         /* Map sense buffer */
3698         srb->segment_x[0].address =
3699             pci_map_single(acb->dev, cmd->sense_buffer,
3700                            sizeof(cmd->sense_buffer), PCI_DMA_FROMDEVICE);
3701         dprintkdbg(DBG_SG, "request_sense: map buffer %p->%08x(%05x)\n",
3702                cmd->sense_buffer, srb->segment_x[0].address,
3703                sizeof(cmd->sense_buffer));
3704         srb->sg_count = 1;
3705         srb->sg_index = 0;
3706
3707         if (start_scsi(acb, dcb, srb)) {        /* Should only happen, if sb. else grabs the bus */
3708                 dprintkl(KERN_DEBUG,
3709                         "request_sense: (pid#%li) failed <%02i-%i>\n",
3710                         srb->cmd->pid, dcb->target_id, dcb->target_lun);
3711                 srb_going_to_waiting_move(dcb, srb);
3712                 waiting_set_timer(acb, HZ / 100);
3713         }
3714 }
3715
3716
3717 /**
3718  * device_alloc - Allocate a new device instance. This create the
3719  * devices instance and sets up all the data items. The adapter
3720  * instance is required to obtain confiuration information for this
3721  * device. This does *not* add this device to the adapters device
3722  * list.
3723  *
3724  * @acb: The adapter to obtain configuration information from.
3725  * @target: The target for the new device.
3726  * @lun: The lun for the new device.
3727  *
3728  * Return the new device if succesfull or NULL on failure.
3729  **/
3730 static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
3731                 u8 target, u8 lun)
3732 {
3733         struct NvRamType *eeprom = &acb->eeprom;
3734         u8 period_index = eeprom->target[target].period & 0x07;
3735         struct DeviceCtlBlk *dcb;
3736
3737         dcb = kmalloc(sizeof(struct DeviceCtlBlk), GFP_ATOMIC);
3738         dprintkdbg(DBG_0, "device_alloc: <%02i-%i>\n", target, lun);
3739         if (!dcb)
3740                 return NULL;
3741         dcb->acb = NULL;
3742         INIT_LIST_HEAD(&dcb->srb_going_list);
3743         INIT_LIST_HEAD(&dcb->srb_waiting_list);
3744         dcb->active_srb = NULL;
3745         dcb->tag_mask = 0;
3746         dcb->max_command = 1;
3747         dcb->target_id = target;
3748         dcb->target_lun = lun;
3749 #ifndef DC395x_NO_DISCONNECT
3750         dcb->identify_msg =
3751             IDENTIFY(dcb->dev_mode & NTC_DO_DISCONNECT, lun);
3752 #else
3753         dcb->identify_msg = IDENTIFY(0, lun);
3754 #endif
3755         dcb->dev_mode = eeprom->target[target].cfg0;
3756         dcb->inquiry7 = 0;
3757         dcb->sync_mode = 0;
3758         dcb->min_nego_period = clock_period[period_index];
3759         dcb->sync_period = 0;
3760         dcb->sync_offset = 0;
3761         dcb->flag = 0;
3762
3763 #ifndef DC395x_NO_WIDE
3764         if ((dcb->dev_mode & NTC_DO_WIDE_NEGO)
3765             && (acb->config & HCC_WIDE_CARD))
3766                 dcb->sync_mode |= WIDE_NEGO_ENABLE;
3767 #endif
3768 #ifndef DC395x_NO_SYNC
3769         if (dcb->dev_mode & NTC_DO_SYNC_NEGO)
3770                 if (!(lun) || current_sync_offset)
3771                         dcb->sync_mode |= SYNC_NEGO_ENABLE;
3772 #endif
3773         if (dcb->target_lun != 0) {
3774                 /* Copy settings */
3775                 struct DeviceCtlBlk *p;
3776                 list_for_each_entry(p, &acb->dcb_list, list)
3777                         if (p->target_id == dcb->target_id)
3778                                 break;
3779                 dprintkdbg(DBG_1, 
3780                        "device_alloc: <%02i-%i> copy from <%02i-%i>\n",
3781                        dcb->target_id, dcb->target_lun,
3782                        p->target_id, p->target_lun);
3783                 dcb->sync_mode = p->sync_mode;
3784                 dcb->sync_period = p->sync_period;
3785                 dcb->min_nego_period = p->min_nego_period;
3786                 dcb->sync_offset = p->sync_offset;
3787                 dcb->inquiry7 = p->inquiry7;
3788         }
3789         return dcb;
3790 }
3791
3792
3793 /**
3794  * adapter_add_device - Adds the device instance to the adaptor instance.
3795  *
3796  * @acb: The adapter device to be updated
3797  * @dcb: A newly created and intialised device instance to add.
3798  **/
3799 static void adapter_add_device(struct AdapterCtlBlk *acb,
3800                 struct DeviceCtlBlk *dcb)
3801 {
3802         /* backpointer to adapter */
3803         dcb->acb = acb;
3804         
3805         /* set run_robin to this device if it is currently empty */
3806         if (list_empty(&acb->dcb_list))
3807                 acb->dcb_run_robin = dcb;
3808
3809         /* add device to list */
3810         list_add_tail(&dcb->list, &acb->dcb_list);
3811
3812         /* update device maps */
3813         acb->dcb_map[dcb->target_id] |= (1 << dcb->target_lun);
3814         acb->children[dcb->target_id][dcb->target_lun] = dcb;
3815 }
3816
3817
3818 /**
3819  * adapter_remove_device - Removes the device instance from the adaptor
3820  * instance. The device instance is not check in any way or freed by this. 
3821  * The caller is expected to take care of that. This will simply remove the
3822  * device from the adapters data strcutures.
3823  *
3824  * @acb: The adapter device to be updated
3825  * @dcb: A device that has previously been added to the adapter.
3826  **/
3827 static void adapter_remove_device(struct AdapterCtlBlk *acb,
3828                 struct DeviceCtlBlk *dcb)
3829 {
3830         struct DeviceCtlBlk *i;
3831         struct DeviceCtlBlk *tmp;
3832         dprintkdbg(DBG_0, "adapter_remove_device: <%02i-%i>\n",
3833                 dcb->target_id, dcb->target_lun);
3834
3835         /* fix up any pointers to this device that we have in the adapter */
3836         if (acb->active_dcb == dcb)
3837                 acb->active_dcb = NULL;
3838         if (acb->dcb_run_robin == dcb)
3839                 acb->dcb_run_robin = dcb_get_next(&acb->dcb_list, dcb);
3840
3841         /* unlink from list */
3842         list_for_each_entry_safe(i, tmp, &acb->dcb_list, list)
3843                 if (dcb == i) {
3844                         list_del(&i->list);
3845                         break;
3846                 }
3847
3848         /* clear map and children */    
3849         acb->dcb_map[dcb->target_id] &= ~(1 << dcb->target_lun);
3850         acb->children[dcb->target_id][dcb->target_lun] = NULL;
3851         dcb->acb = NULL;
3852 }
3853
3854
3855 /**
3856  * adapter_remove_and_free_device - Removes a single device from the adapter
3857  * and then frees the device information.
3858  *
3859  * @acb: The adapter device to be updated
3860  * @dcb: A device that has previously been added to the adapter.
3861  */
3862 static void adapter_remove_and_free_device(struct AdapterCtlBlk *acb,
3863                 struct DeviceCtlBlk *dcb)
3864 {
3865         if (list_size(&dcb->srb_going_list) > 1) {
3866                 dprintkdbg(DBG_1, "adapter_remove_and_free_device: <%02i-%i> "
3867                            "Won't remove because of %i active requests.\n",
3868                            dcb->target_id, dcb->target_lun,
3869                            list_size(&dcb->srb_going_list));
3870                 return;
3871         }
3872         adapter_remove_device(acb, dcb);
3873         kfree(dcb);
3874 }
3875
3876
3877 /**
3878  * adapter_remove_and_free_all_devices - Removes and frees all of the
3879  * devices associated with the specified adapter.
3880  *
3881  * @acb: The adapter from which all devices should be removed.
3882  **/
3883 static void adapter_remove_and_free_all_devices(struct AdapterCtlBlk* acb)
3884 {
3885         struct DeviceCtlBlk *dcb;
3886         struct DeviceCtlBlk *tmp;
3887         dprintkdbg(DBG_1, "adapter_remove_and_free_all_devices: num=%i\n",
3888                    list_size(&acb->dcb_list));
3889
3890         list_for_each_entry_safe(dcb, tmp, &acb->dcb_list, list)
3891                 adapter_remove_and_free_device(acb, dcb);
3892 }
3893
3894
3895 /**
3896  * dc395x_slave_alloc - Called by the scsi mid layer to tell us about a new
3897  * scsi device that we need to deal with. We allocate a new device and then
3898  * insert that device into the adapters device list.
3899  *
3900  * @scsi_device: The new scsi device that we need to handle.
3901  **/
3902 static int dc395x_slave_alloc(struct scsi_device *scsi_device)
3903 {
3904         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
3905         struct DeviceCtlBlk *dcb;
3906
3907         dcb = device_alloc(acb, scsi_device->id, scsi_device->lun);
3908         if (!dcb)
3909                 return -ENOMEM;
3910         adapter_add_device(acb, dcb);
3911
3912         return 0;
3913 }
3914
3915
3916 /**
3917  * dc395x_slave_destroy - Called by the scsi mid layer to tell us about a
3918  * device that is going away.
3919  *
3920  * @scsi_device: The new scsi device that we need to handle.
3921  **/
3922 static void dc395x_slave_destroy(struct scsi_device *scsi_device)
3923 {
3924         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
3925         struct DeviceCtlBlk *dcb = find_dcb(acb, scsi_device->id, scsi_device->lun);
3926         if (dcb)
3927                 adapter_remove_and_free_device(acb, dcb);
3928 }
3929
3930
3931
3932
3933 /**
3934  * trms1040_wait_30us: wait for 30 us
3935  *
3936  * Waits for 30us (using the chip by the looks of it..)
3937  *
3938  * @io_port: base I/O address
3939  **/
3940 static void __devinit trms1040_wait_30us(unsigned long io_port)
3941 {
3942         /* ScsiPortStallExecution(30); wait 30 us */
3943         outb(5, io_port + TRM_S1040_GEN_TIMER);
3944         while (!(inb(io_port + TRM_S1040_GEN_STATUS) & GTIMEOUT))
3945                 /* nothing */ ;
3946 }
3947
3948
3949 /**
3950  * trms1040_write_cmd - write the secified command and address to
3951  * chip
3952  *
3953  * @io_port:    base I/O address
3954  * @cmd:        SB + op code (command) to send
3955  * @addr:       address to send
3956  **/
3957 static void __devinit trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
3958 {
3959         int i;
3960         u8 send_data;
3961
3962         /* program SB + OP code */
3963         for (i = 0; i < 3; i++, cmd <<= 1) {
3964                 send_data = NVR_SELECT;
3965                 if (cmd & 0x04) /* Start from bit 2 */
3966                         send_data |= NVR_BITOUT;
3967
3968                 outb(send_data, io_port + TRM_S1040_GEN_NVRAM);
3969                 trms1040_wait_30us(io_port);
3970                 outb((send_data | NVR_CLOCK),
3971                      io_port + TRM_S1040_GEN_NVRAM);
3972                 trms1040_wait_30us(io_port);
3973         }
3974
3975         /* send address */
3976         for (i = 0; i < 7; i++, addr <<= 1) {
3977                 send_data = NVR_SELECT;
3978                 if (addr & 0x40)        /* Start from bit 6 */
3979                         send_data |= NVR_BITOUT;
3980
3981                 outb(send_data, io_port + TRM_S1040_GEN_NVRAM);
3982                 trms1040_wait_30us(io_port);
3983                 outb((send_data | NVR_CLOCK),
3984                      io_port + TRM_S1040_GEN_NVRAM);
3985                 trms1040_wait_30us(io_port);
3986         }
3987         outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
3988         trms1040_wait_30us(io_port);
3989 }
3990
3991
3992 /**
3993  * trms1040_set_data - store a single byte in the eeprom
3994  *
3995  * Called from write all to write a single byte into the SSEEPROM
3996  * Which is done one bit at a time.
3997  *
3998  * @io_port:    base I/O address
3999  * @addr:       offset into EEPROM
4000  * @byte:       bytes to write
4001  **/
4002 static void __devinit trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
4003 {
4004         int i;
4005         u8 send_data;
4006
4007         /* Send write command & address */
4008         trms1040_write_cmd(io_port, 0x05, addr);
4009
4010         /* Write data */
4011         for (i = 0; i < 8; i++, byte <<= 1) {
4012                 send_data = NVR_SELECT;
4013                 if (byte & 0x80)        /* Start from bit 7 */
4014                         send_data |= NVR_BITOUT;
4015
4016                 outb(send_data, io_port + TRM_S1040_GEN_NVRAM);
4017                 trms1040_wait_30us(io_port);
4018                 outb((send_data | NVR_CLOCK), io_port + TRM_S1040_GEN_NVRAM);
4019                 trms1040_wait_30us(io_port);
4020         }
4021         outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
4022         trms1040_wait_30us(io_port);
4023
4024         /* Disable chip select */
4025         outb(0, io_port + TRM_S1040_GEN_NVRAM);
4026         trms1040_wait_30us(io_port);
4027
4028         outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
4029         trms1040_wait_30us(io_port);
4030
4031         /* Wait for write ready */
4032         while (1) {
4033                 outb((NVR_SELECT | NVR_CLOCK), io_port + TRM_S1040_GEN_NVRAM);
4034                 trms1040_wait_30us(io_port);
4035
4036                 outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
4037                 trms1040_wait_30us(io_port);
4038
4039                 if (inb(io_port + TRM_S1040_GEN_NVRAM) & NVR_BITIN)
4040                         break;
4041         }
4042
4043         /*  Disable chip select */
4044         outb(0, io_port + TRM_S1040_GEN_NVRAM);
4045 }
4046
4047
4048 /**
4049  * trms1040_write_all - write 128 bytes to the eeprom
4050  *
4051  * Write the supplied 128 bytes to the chips SEEPROM
4052  *
4053  * @eeprom:     the data to write
4054  * @io_port:    the base io port
4055  **/
4056 static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
4057 {
4058         u8 *b_eeprom = (u8 *)eeprom;
4059         u8 addr;
4060
4061         /* Enable SEEPROM */
4062         outb((inb(io_port + TRM_S1040_GEN_CONTROL) | EN_EEPROM),
4063              io_port + TRM_S1040_GEN_CONTROL);
4064
4065         /* write enable */
4066         trms1040_write_cmd(io_port, 0x04, 0xFF);
4067         outb(0, io_port + TRM_S1040_GEN_NVRAM);
4068         trms1040_wait_30us(io_port);
4069
4070         /* write */
4071         for (addr = 0; addr < 128; addr++, b_eeprom++)
4072                 trms1040_set_data(io_port, addr, *b_eeprom);
4073
4074         /* write disable */
4075         trms1040_write_cmd(io_port, 0x04, 0x00);
4076         outb(0, io_port + TRM_S1040_GEN_NVRAM);
4077         trms1040_wait_30us(io_port);
4078
4079         /* Disable SEEPROM */
4080         outb((inb(io_port + TRM_S1040_GEN_CONTROL) & ~EN_EEPROM),
4081              io_port + TRM_S1040_GEN_CONTROL);
4082 }
4083
4084
4085 /**
4086  * trms1040_get_data - get a single byte from the eeprom
4087  *
4088  * Called from read all to read a single byte into the SSEEPROM
4089  * Which is done one bit at a time.
4090  *
4091  * @io_port:    base I/O address
4092  * @addr:       offset into SEEPROM
4093  *
4094  * Returns the the byte read.
4095  **/
4096 static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
4097 {
4098         int i;
4099         u8 read_byte;
4100         u8 result = 0;
4101
4102         /* Send read command & address */
4103         trms1040_write_cmd(io_port, 0x06, addr);
4104
4105         /* read data */
4106         for (i = 0; i < 8; i++) {
4107                 outb((NVR_SELECT | NVR_CLOCK), io_port + TRM_S1040_GEN_NVRAM);
4108                 trms1040_wait_30us(io_port);
4109                 outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
4110
4111                 /* Get data bit while falling edge */
4112                 read_byte = inb(io_port + TRM_S1040_GEN_NVRAM);
4113                 result <<= 1;
4114                 if (read_byte & NVR_BITIN)
4115                         result |= 1;
4116
4117                 trms1040_wait_30us(io_port);
4118         }
4119
4120         /* Disable chip select */
4121         outb(0, io_port + TRM_S1040_GEN_NVRAM);
4122         return result;
4123 }
4124
4125
4126 /**
4127  * trms1040_read_all - read all bytes from the eeprom
4128  *
4129  * Read the 128 bytes from the SEEPROM.
4130  *
4131  * @eeprom:     where to store the data
4132  * @io_port:    the base io port
4133  **/
4134 static void __devinit trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
4135 {
4136         u8 *b_eeprom = (u8 *)eeprom;
4137         u8 addr;
4138
4139         /* Enable SEEPROM */
4140         outb((inb(io_port + TRM_S1040_GEN_CONTROL) | EN_EEPROM),
4141              io_port + TRM_S1040_GEN_CONTROL);
4142
4143         /* read details */
4144         for (addr = 0; addr < 128; addr++, b_eeprom++)
4145                 *b_eeprom = trms1040_get_data(io_port, addr);
4146
4147         /* Disable SEEPROM */
4148         outb((inb(io_port + TRM_S1040_GEN_CONTROL) & ~EN_EEPROM),
4149              io_port + TRM_S1040_GEN_CONTROL);
4150 }
4151
4152
4153
4154 /**
4155  * check_eeprom - get and check contents of the eeprom
4156  *
4157  * Read seeprom 128 bytes into the memory provider in eeprom.
4158  * Checks the checksum and if it's not correct it uses a set of default
4159  * values.
4160  *
4161  * @eeprom:     caller allocated strcuture to read the eeprom data into
4162  * @io_port:    io port to read from
4163  **/
4164 static void __devinit check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
4165 {
4166         u16 *w_eeprom = (u16 *)eeprom;
4167         u16 w_addr;
4168         u16 cksum;
4169         u32 d_addr;
4170         u32 *d_eeprom;
4171
4172         trms1040_read_all(eeprom, io_port);     /* read eeprom */
4173
4174         cksum = 0;
4175         for (w_addr = 0, w_eeprom = (u16 *)eeprom; w_addr < 64;
4176              w_addr++, w_eeprom++)
4177                 cksum += *w_eeprom;
4178         if (cksum != 0x1234) {
4179                 /*
4180                  * Checksum is wrong.
4181                  * Load a set of defaults into the eeprom buffer
4182                  */
4183                 dprintkl(KERN_WARNING,
4184                         "EEProm checksum error: using default values and options.\n");
4185                 eeprom->sub_vendor_id[0] = (u8)PCI_VENDOR_ID_TEKRAM;
4186                 eeprom->sub_vendor_id[1] = (u8)(PCI_VENDOR_ID_TEKRAM >> 8);
4187                 eeprom->sub_sys_id[0] = (u8)PCI_DEVICE_ID_TEKRAM_TRMS1040;
4188                 eeprom->sub_sys_id[1] =
4189                     (u8)(PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
4190                 eeprom->sub_class = 0x00;
4191                 eeprom->vendor_id[0] = (u8)PCI_VENDOR_ID_TEKRAM;
4192                 eeprom->vendor_id[1] = (u8)(PCI_VENDOR_ID_TEKRAM >> 8);
4193                 eeprom->device_id[0] = (u8)PCI_DEVICE_ID_TEKRAM_TRMS1040;
4194                 eeprom->device_id[1] =
4195                     (u8)(PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
4196                 eeprom->reserved = 0x00;
4197
4198                 for (d_addr = 0, d_eeprom = (u32 *)eeprom->target;
4199                      d_addr < 16; d_addr++, d_eeprom++)
4200                         *d_eeprom = 0x00000077; /* cfg3,cfg2,period,cfg0 */
4201
4202                 *d_eeprom++ = 0x04000F07;       /* max_tag,delay_time,channel_cfg,scsi_id */
4203                 *d_eeprom++ = 0x00000015;       /* reserved1,boot_lun,boot_target,reserved0 */
4204                 for (d_addr = 0; d_addr < 12; d_addr++, d_eeprom++)
4205                         *d_eeprom = 0x00;
4206
4207                 /* Now load defaults (maybe set by boot/module params) */
4208                 set_safe_settings();
4209                 fix_settings();
4210                 eeprom_override(eeprom);
4211
4212                 eeprom->cksum = 0x00;
4213                 for (w_addr = 0, cksum = 0, w_eeprom = (u16 *)eeprom;
4214                      w_addr < 63; w_addr++, w_eeprom++)
4215                         cksum += *w_eeprom;
4216
4217                 *w_eeprom = 0x1234 - cksum;
4218                 trms1040_write_all(eeprom, io_port);
4219                 eeprom->delay_time = cfg_data[CFG_RESET_DELAY].value;
4220         } else {
4221                 set_safe_settings();
4222                 eeprom_index_to_delay(eeprom);
4223                 eeprom_override(eeprom);
4224         }
4225 }
4226
4227
4228 /**
4229  * print_eeprom_settings - output the eeprom settings
4230  * to the kernel log so people can see what they were.
4231  *
4232  * @eeprom: The eeprom data strucutre to show details for.
4233  **/
4234 static void __devinit print_eeprom_settings(struct NvRamType *eeprom)
4235 {
4236         dprintkl(KERN_INFO, "Used settings: AdapterID=%02i, Speed=%i(%02i.%01iMHz), dev_mode=0x%02x\n",
4237                 eeprom->scsi_id,
4238                 eeprom->target[0].period,
4239                 clock_speed[eeprom->target[0].period] / 10,
4240                 clock_speed[eeprom->target[0].period] % 10,
4241                 eeprom->target[0].cfg0);
4242         dprintkl(KERN_INFO, "               AdaptMode=0x%02x, Tags=%i(%02i), DelayReset=%is\n",
4243                 eeprom->channel_cfg, eeprom->max_tag,
4244                 1 << eeprom->max_tag, eeprom->delay_time);
4245 }
4246
4247
4248 /* Free SG tables */
4249 static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
4250 {
4251         int i;
4252         const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
4253
4254         for (i = 0; i < DC395x_MAX_SRB_CNT; i += srbs_per_page)
4255                 kfree(acb->srb_array[i].segment_x);
4256
4257         vfree(acb->srb_array[0].virt_map);
4258 }
4259
4260
4261 /*
4262  * Allocate SG tables; as we have to pci_map them, an SG list (struct SGentry*)
4263  * should never cross a page boundary */
4264 static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
4265 {
4266         const unsigned mem_needed = (DC395x_MAX_SRB_CNT+1)
4267                                     *SEGMENTX_LEN;
4268         int pages = (mem_needed+(PAGE_SIZE-1))/PAGE_SIZE;
4269         const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
4270         int srb_idx = 0;
4271         unsigned i = 0;
4272         struct SGentry *ptr;
4273         void **virt_array;
4274
4275         for (i = 0; i < DC395x_MAX_SRB_CNT; i++) {
4276                 acb->srb_array[i].segment_x = NULL;
4277                 acb->srb_array[i].virt_map = NULL;
4278         }
4279
4280         dprintkdbg(DBG_1, "Allocate %i pages for SG tables\n", pages);
4281         while (pages--) {
4282                 ptr = (struct SGentry *)kmalloc(PAGE_SIZE, GFP_KERNEL);
4283                 if (!ptr) {
4284                         adapter_sg_tables_free(acb);
4285                         return 1;
4286                 }
4287                 dprintkdbg(DBG_1, "Allocate %li bytes at %p for SG segments %i\n",
4288                         PAGE_SIZE, ptr, srb_idx);
4289                 i = 0;
4290                 while (i < srbs_per_page && srb_idx < DC395x_MAX_SRB_CNT)
4291                         acb->srb_array[srb_idx++].segment_x =
4292                             ptr + (i++ * DC395x_MAX_SG_LISTENTRY);
4293         }
4294         if (i < srbs_per_page)
4295                 acb->srb.segment_x =
4296                     ptr + (i * DC395x_MAX_SG_LISTENTRY);
4297         else
4298                 dprintkl(KERN_DEBUG, "No space for tmsrb SG table reserved?!\n");
4299
4300         virt_array = vmalloc((DC395x_MAX_SRB_CNT + 1) * DC395x_MAX_SG_LISTENTRY * sizeof(void*));
4301
4302         if (!virt_array) {
4303                 adapter_sg_tables_free(acb);
4304                 return 1;
4305         }
4306
4307         for (i = 0; i < DC395x_MAX_SRB_CNT + 1; i++) {
4308                 acb->srb_array[i].virt_map = virt_array;
4309                 virt_array += DC395x_MAX_SG_LISTENTRY;
4310         }
4311
4312         return 0;
4313 }
4314
4315
4316
4317 /**
4318  * adapter_print_config - print adapter connection and termination
4319  * config
4320  *
4321  * The io port in the adapter needs to have been set before calling
4322  * this function.
4323  *
4324  * @acb: The adapter to print the information for.
4325  **/
4326 static void __devinit adapter_print_config(struct AdapterCtlBlk *acb)
4327 {
4328         u8 bval;
4329
4330         bval = DC395x_read8(acb, TRM_S1040_GEN_STATUS);
4331         dprintkl(KERN_INFO, "%sConnectors: ",
4332                 ((bval & WIDESCSI) ? "(Wide) " : ""));
4333         if (!(bval & CON5068))
4334                 printk("ext%s ", !(bval & EXT68HIGH) ? "68" : "50");
4335         if (!(bval & CON68))
4336                 printk("int68%s ", !(bval & INT68HIGH) ? "" : "(50)");
4337         if (!(bval & CON50))
4338                 printk("int50 ");
4339         if ((bval & (CON5068 | CON50 | CON68)) ==
4340             0 /*(CON5068 | CON50 | CON68) */ )
4341                 printk(" Oops! (All 3?) ");
4342         bval = DC395x_read8(acb, TRM_S1040_GEN_CONTROL);
4343         printk(" Termination: ");
4344         if (bval & DIS_TERM)
4345                 printk("Disabled\n");
4346         else {
4347                 if (bval & AUTOTERM)
4348                         printk("Auto ");
4349                 if (bval & LOW8TERM)
4350                         printk("Low ");
4351                 if (bval & UP8TERM)
4352                         printk("High ");
4353                 printk("\n");
4354         }
4355 }
4356
4357
4358 /**
4359  * adapter_init_params - Initialize the various parameters in the
4360  * adapter structure. Note that the pointer to the scsi_host is set
4361  * early (when this instance is created) and the io_port and irq
4362  * values are set later after they have been reserved. This just gets
4363  * everything set to a good starting position.
4364  *
4365  * The eeprom structure in the adapter needs to have been set before
4366  * calling this function.
4367  *
4368  * @acb: The adapter to initialize.
4369  **/
4370 static void __devinit adapter_init_params(struct AdapterCtlBlk *acb)
4371 {
4372         struct NvRamType *eeprom = &acb->eeprom;
4373         int i;
4374
4375         /* NOTE: acb->scsi_host is set at scsi_host/acb creation time */
4376         /* NOTE: acb->io_port_base is set at port registration time */
4377         /* NOTE: acb->io_port_len is set at port registration time */
4378
4379         INIT_LIST_HEAD(&acb->dcb_list);
4380         acb->dcb_run_robin = NULL;
4381         acb->active_dcb = NULL;
4382
4383         INIT_LIST_HEAD(&acb->srb_free_list);
4384         /*  temp SRB for Q tag used or abort command used  */
4385         acb->tmp_srb = &acb->srb;
4386         init_timer(&acb->waiting_timer);
4387         init_timer(&acb->selto_timer);
4388
4389         acb->srb_count = DC395x_MAX_SRB_CNT;
4390
4391         acb->sel_timeout = DC395x_SEL_TIMEOUT;  /* timeout=250ms */
4392         /* NOTE: acb->irq_level is set at IRQ registration time */
4393
4394         acb->tag_max_num = 1 << eeprom->max_tag;
4395         if (acb->tag_max_num > 30)
4396                 acb->tag_max_num = 30;
4397
4398         acb->acb_flag = 0;      /* RESET_DETECT, RESET_DONE, RESET_DEV */
4399         acb->gmode2 = eeprom->channel_cfg;
4400         acb->config = 0;        /* NOTE: actually set in adapter_init_chip */
4401
4402         if (eeprom->channel_cfg & NAC_SCANLUN)
4403                 acb->lun_chk = 1;
4404         acb->scan_devices = 1;
4405
4406         acb->scsi_host->this_id = eeprom->scsi_id;
4407         acb->hostid_bit = (1 << acb->scsi_host->this_id);
4408
4409         for (i = 0; i < DC395x_MAX_SCSI_ID; i++)
4410                 acb->dcb_map[i] = 0;
4411
4412         acb->msg_len = 0;
4413         
4414         /* link static array of srbs into the srb free list */
4415         for (i = 0; i < acb->srb_count - 1; i++)
4416                 srb_free_insert(acb, &acb->srb_array[i]);
4417 }
4418
4419
4420 /**
4421  * adapter_init_host - Initialize the scsi host instance based on
4422  * values that we have already stored in the adapter instance. There's
4423  * some mention that a lot of these are deprecated, so we won't use
4424  * them (we'll use the ones in the adapter instance) but we'll fill
4425  * them in in case something else needs them.
4426  *
4427  * The eeprom structure, irq and io ports in the adapter need to have
4428  * been set before calling this function.
4429  *
4430  * @host: The scsi host instance to fill in the values for.
4431  **/
4432 static void __devinit adapter_init_scsi_host(struct Scsi_Host *host)
4433 {
4434         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
4435         struct NvRamType *eeprom = &acb->eeprom;
4436         
4437         host->max_cmd_len = 24;
4438         host->can_queue = DC395x_MAX_CMD_QUEUE;
4439         host->cmd_per_lun = DC395x_MAX_CMD_PER_LUN;
4440         host->this_id = (int)eeprom->scsi_id;
4441         host->io_port = acb->io_port_base;
4442         host->n_io_port = acb->io_port_len;
4443         host->dma_channel = -1;
4444         host->unique_id = acb->io_port_base;
4445         host->irq = acb->irq_level;
4446         host->last_reset = jiffies;
4447
4448         host->max_id = 16;
4449         if (host->max_id - 1 == eeprom->scsi_id)
4450                 host->max_id--;
4451
4452 #ifdef CONFIG_SCSI_MULTI_LUN
4453         if (eeprom->channel_cfg & NAC_SCANLUN)
4454                 host->max_lun = 8;
4455         else
4456                 host->max_lun = 1;
4457 #else
4458         host->max_lun = 1;
4459 #endif
4460
4461 }
4462
4463
4464 /**
4465  * adapter_init_chip - Get the chip into a know state and figure out
4466  * some of the settings that apply to this adapter.
4467  *
4468  * The io port in the adapter needs to have been set before calling
4469  * this function. The config will be configured correctly on return.
4470  *
4471  * @acb: The adapter which we are to init.
4472  **/
4473 static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
4474 {
4475         struct NvRamType *eeprom = &acb->eeprom;
4476         
4477         /* Mask all the interrupt */
4478         DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0x00);
4479         DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0x00);
4480
4481         /* Reset SCSI module */
4482         DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_RSTMODULE);
4483
4484         /* Reset PCI/DMA module */
4485         DC395x_write8(acb, TRM_S1040_DMA_CONTROL, DMARESETMODULE);
4486         udelay(20);
4487
4488         /* program configuration 0 */
4489         acb->config = HCC_AUTOTERM | HCC_PARITY;
4490         if (DC395x_read8(acb, TRM_S1040_GEN_STATUS) & WIDESCSI)
4491                 acb->config |= HCC_WIDE_CARD;
4492
4493         if (eeprom->channel_cfg & NAC_POWERON_SCSI_RESET)
4494                 acb->config |= HCC_SCSI_RESET;
4495
4496         if (acb->config & HCC_SCSI_RESET) {
4497                 dprintkl(KERN_INFO, "Performing initial SCSI bus reset\n");
4498                 DC395x_write8(acb, TRM_S1040_SCSI_CONTROL, DO_RSTSCSI);
4499
4500                 /*while (!( DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS) & INT_SCSIRESET )); */
4501                 /*spin_unlock_irq (&io_request_lock); */
4502                 udelay(500);
4503
4504                 acb->scsi_host->last_reset =
4505                     jiffies + HZ / 2 +
4506                     HZ * acb->eeprom.delay_time;
4507
4508                 /*spin_lock_irq (&io_request_lock); */
4509         }
4510 }
4511
4512
4513 /**
4514  * init_adapter - Grab the resource for the card, setup the adapter
4515  * information, set the card into a known state, create the various
4516  * tables etc etc. This basically gets all adapter information all up
4517  * to date, intialised and gets the chip in sync with it.
4518  *
4519  * @host:       This hosts adapter structure
4520  * @io_port:    The base I/O port
4521  * @irq:        IRQ
4522  *
4523  * Returns 0 if the initialization succeeds, any other value on
4524  * failure.
4525  **/
4526 static int __devinit adapter_init(struct AdapterCtlBlk *acb,
4527         unsigned long io_port, u32 io_port_len, unsigned int irq)
4528 {
4529         if (!request_region(io_port, io_port_len, DC395X_NAME)) {
4530                 dprintkl(KERN_ERR, "Failed to reserve IO region 0x%lx\n", io_port);
4531                 goto failed;
4532         }
4533         /* store port base to indicate we have registered it */
4534         acb->io_port_base = io_port;
4535         acb->io_port_len = io_port_len;
4536         
4537         if (request_irq(irq, dc395x_interrupt, SA_SHIRQ, DC395X_NAME, acb)) {
4538                 /* release the region we just claimed */
4539                 dprintkl(KERN_INFO, "Failed to register IRQ\n");
4540                 goto failed;
4541         }
4542         /* store irq to indicate we have registered it */
4543         acb->irq_level = irq;
4544
4545         /* get eeprom configuration information and command line settings etc */
4546         check_eeprom(&acb->eeprom, io_port);
4547         print_eeprom_settings(&acb->eeprom);
4548
4549         /* setup adapter control block */       
4550         adapter_init_params(acb);
4551         
4552         /* display card connectors/termination settings */
4553         adapter_print_config(acb);
4554
4555         if (adapter_sg_tables_alloc(acb)) {
4556                 dprintkl(KERN_DEBUG, "Memory allocation for SG tables failed\n");
4557                 goto failed;
4558         }
4559         adapter_init_scsi_host(acb->scsi_host);
4560         adapter_init_chip(acb);
4561         set_basic_config(acb);
4562
4563         dprintkdbg(DBG_0,
4564                 "adapter_init: acb=%p, pdcb_map=%p psrb_array=%p "
4565                 "size{acb=0x%04x dcb=0x%04x srb=0x%04x}\n",
4566                 acb, acb->dcb_map, acb->srb_array, sizeof(struct AdapterCtlBlk),
4567                 sizeof(struct DeviceCtlBlk), sizeof(struct ScsiReqBlk));
4568         return 0;
4569
4570 failed:
4571         if (acb->irq_level)
4572                 free_irq(acb->irq_level, acb);
4573         if (acb->io_port_base)
4574                 release_region(acb->io_port_base, acb->io_port_len);
4575         adapter_sg_tables_free(acb);
4576
4577         return 1;
4578 }
4579
4580
4581 /**
4582  * adapter_uninit_chip - cleanly shut down the scsi controller chip,
4583  * stopping all operations and disabling interrupt generation on the
4584  * card.
4585  *
4586  * @acb: The adapter which we are to shutdown.
4587  **/
4588 static void adapter_uninit_chip(struct AdapterCtlBlk *acb)
4589 {
4590         /* disable interrupts */
4591         DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0);
4592         DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0);
4593
4594         /* reset the scsi bus */
4595         if (acb->config & HCC_SCSI_RESET)
4596                 reset_scsi_bus(acb);
4597
4598         /* clear any pending interupt state */
4599         DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
4600 }
4601
4602
4603
4604 /**
4605  * adapter_uninit - Shut down the chip and release any resources that
4606  * we had allocated. Once this returns the adapter should not be used
4607  * anymore.
4608  *
4609  * @acb: The adapter which we are to un-initialize.
4610  **/
4611 static void adapter_uninit(struct AdapterCtlBlk *acb)
4612 {
4613         unsigned long flags;
4614         DC395x_LOCK_IO(acb->scsi_host, flags);
4615
4616         /* remove timers */
4617         if (timer_pending(&acb->waiting_timer))
4618                 del_timer(&acb->waiting_timer);
4619         if (timer_pending(&acb->selto_timer))
4620                 del_timer(&acb->selto_timer);
4621
4622         adapter_uninit_chip(acb);
4623         adapter_remove_and_free_all_devices(acb);
4624         DC395x_UNLOCK_IO(acb->scsi_host, flags);
4625
4626         if (acb->irq_level)
4627                 free_irq(acb->irq_level, acb);
4628         if (acb->io_port_base)
4629                 release_region(acb->io_port_base, acb->io_port_len);
4630
4631         adapter_sg_tables_free(acb);
4632 }
4633
4634
4635 #undef SPRINTF
4636 #define SPRINTF(args...) pos += sprintf(pos, args)
4637
4638 #undef YESNO
4639 #define YESNO(YN) \
4640  if (YN) SPRINTF(" Yes ");\
4641  else SPRINTF(" No  ")
4642
4643 static int dc395x_proc_info(struct Scsi_Host *host, char *buffer,
4644                 char **start, off_t offset, int length, int inout)
4645 {
4646         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
4647         int spd, spd1;
4648         char *pos = buffer;
4649         struct DeviceCtlBlk *dcb;
4650         unsigned long flags;
4651         int dev;
4652
4653         if (inout)              /* Has data been written to the file ? */
4654                 return -EPERM;
4655
4656         SPRINTF(DC395X_BANNER " PCI SCSI Host Adapter\n");
4657         SPRINTF(" Driver Version " DC395X_VERSION "\n");
4658
4659         DC395x_LOCK_IO(acb->scsi_host, flags);
4660
4661         SPRINTF("SCSI Host Nr %i, ", host->host_no);
4662         SPRINTF("DC395U/UW/F DC315/U %s\n",
4663                 (acb->config & HCC_WIDE_CARD) ? "Wide" : "");
4664         SPRINTF("io_port_base 0x%04lx, ", acb->io_port_base);
4665         SPRINTF("irq_level 0x%04x, ", acb->irq_level);
4666         SPRINTF(" SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
4667
4668         SPRINTF("MaxID %i, MaxLUN %i, ", host->max_id, host->max_lun);
4669         SPRINTF("AdapterID %i\n", host->this_id);
4670
4671         SPRINTF("tag_max_num %i", acb->tag_max_num);
4672         /*SPRINTF(", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */
4673         SPRINTF(", FilterCfg 0x%02x",
4674                 DC395x_read8(acb, TRM_S1040_SCSI_CONFIG1));
4675         SPRINTF(", DelayReset %is\n", acb->eeprom.delay_time);
4676         /*SPRINTF("\n"); */
4677
4678         SPRINTF("Nr of DCBs: %i\n", list_size(&acb->dcb_list));
4679         SPRINTF
4680             ("Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
4681              acb->dcb_map[0], acb->dcb_map[1], acb->dcb_map[2],
4682              acb->dcb_map[3], acb->dcb_map[4], acb->dcb_map[5],
4683              acb->dcb_map[6], acb->dcb_map[7]);
4684         SPRINTF
4685             ("                      %02x %02x %02x %02x %02x %02x %02x %02x\n",
4686              acb->dcb_map[8], acb->dcb_map[9], acb->dcb_map[10],
4687              acb->dcb_map[11], acb->dcb_map[12], acb->dcb_map[13],
4688              acb->dcb_map[14], acb->dcb_map[15]);
4689
4690         SPRINTF
4691             ("Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n");
4692
4693         dev = 0;
4694         list_for_each_entry(dcb, &acb->dcb_list, list) {
4695                 int nego_period;
4696                 SPRINTF("%02i %02i  %02i ", dev, dcb->target_id,
4697                         dcb->target_lun);
4698                 YESNO(dcb->dev_mode & NTC_DO_PARITY_CHK);
4699                 YESNO(dcb->sync_offset);
4700                 YESNO(dcb->sync_period & WIDE_SYNC);
4701                 YESNO(dcb->dev_mode & NTC_DO_DISCONNECT);
4702                 YESNO(dcb->dev_mode & NTC_DO_SEND_START);
4703                 YESNO(dcb->sync_mode & EN_TAG_QUEUEING);
4704                 nego_period = clock_period[dcb->sync_period & 0x07] << 2;
4705                 if (dcb->sync_offset)
4706                         SPRINTF("  %03i ns ", nego_period);
4707                 else
4708                         SPRINTF(" (%03i ns)", (dcb->min_nego_period << 2));
4709
4710                 if (dcb->sync_offset & 0x0f) {
4711                         spd = 1000 / (nego_period);
4712                         spd1 = 1000 % (nego_period);
4713                         spd1 = (spd1 * 10 + nego_period / 2) / (nego_period);
4714                         SPRINTF("   %2i.%1i M     %02i ", spd, spd1,
4715                                 (dcb->sync_offset & 0x0f));
4716                 } else
4717                         SPRINTF("                 ");
4718
4719                 /* Add more info ... */
4720                 SPRINTF("     %02i\n", dcb->max_command);
4721                 dev++;
4722         }
4723
4724         if (timer_pending(&acb->waiting_timer))
4725                 SPRINTF("Waiting queue timer running\n");
4726         else
4727                 SPRINTF("\n");
4728
4729         list_for_each_entry(dcb, &acb->dcb_list, list) {
4730                 struct ScsiReqBlk *srb;
4731                 if (!list_empty(&dcb->srb_waiting_list))
4732                         SPRINTF("DCB (%02i-%i): Waiting: %i:",
4733                                 dcb->target_id, dcb->target_lun,
4734                                 list_size(&dcb->srb_waiting_list));
4735                 list_for_each_entry(srb, &dcb->srb_waiting_list, list)
4736                         SPRINTF(" %li", srb->cmd->pid);
4737                 if (!list_empty(&dcb->srb_going_list))
4738                         SPRINTF("\nDCB (%02i-%i): Going  : %i:",
4739                                 dcb->target_id, dcb->target_lun,
4740                                 list_size(&dcb->srb_going_list));
4741                 list_for_each_entry(srb, &dcb->srb_going_list, list)
4742                         SPRINTF(" %li", srb->cmd->pid);
4743                 if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
4744                         SPRINTF("\n");
4745         }
4746
4747         if (debug_enabled(DBG_1)) {
4748                 SPRINTF("DCB list for ACB %p:\n", acb);
4749                 list_for_each_entry(dcb, &acb->dcb_list, list) {
4750                         SPRINTF("%p -> ", dcb);
4751                 }
4752                 SPRINTF("END\n");
4753         }
4754
4755         *start = buffer + offset;
4756         DC395x_UNLOCK_IO(acb->scsi_host, flags);
4757
4758         if (pos - buffer < offset)
4759                 return 0;
4760         else if (pos - buffer - offset < length)
4761                 return pos - buffer - offset;
4762         else
4763                 return length;
4764 }
4765
4766
4767 static struct scsi_host_template dc395x_driver_template = {
4768         .module                 = THIS_MODULE,
4769         .proc_name              = DC395X_NAME,
4770         .proc_info              = dc395x_proc_info,
4771         .name                   = DC395X_BANNER " " DC395X_VERSION,
4772         .queuecommand           = dc395x_queue_command,
4773         .bios_param             = dc395x_bios_param,
4774         .slave_alloc            = dc395x_slave_alloc,
4775         .slave_destroy          = dc395x_slave_destroy,
4776         .can_queue              = DC395x_MAX_CAN_QUEUE,
4777         .this_id                = 7,
4778         .sg_tablesize           = DC395x_MAX_SG_TABLESIZE,
4779         .cmd_per_lun            = DC395x_MAX_CMD_PER_LUN,
4780         .eh_abort_handler       = dc395x_eh_abort,
4781         .eh_bus_reset_handler   = dc395x_eh_bus_reset,
4782         .unchecked_isa_dma      = 0,
4783         .use_clustering         = DISABLE_CLUSTERING,
4784 };
4785
4786
4787 /**
4788  * banner_display - Display banner on first instance of driver
4789  * initialized.
4790  **/
4791 static void banner_display(void)
4792 {
4793         static int banner_done = 0;
4794         if (!banner_done)
4795         {
4796                 dprintkl(KERN_INFO, "%s %s\n", DC395X_BANNER, DC395X_VERSION);
4797                 banner_done = 1;
4798         }
4799 }
4800
4801
4802 /**
4803  * dc395x_init_one - Initialise a single instance of the adapter.
4804  *
4805  * The PCI layer will call this once for each instance of the adapter
4806  * that it finds in the system. The pci_dev strcuture indicates which
4807  * instance we are being called from.
4808  * 
4809  * @dev: The PCI device to intialize.
4810  * @id: Looks like a pointer to the entry in our pci device table
4811  * that was actually matched by the PCI subsystem.
4812  *
4813  * Returns 0 on success, or an error code (-ve) on failure.
4814  **/
4815 static int __devinit dc395x_init_one(struct pci_dev *dev,
4816                 const struct pci_device_id *id)
4817 {
4818         struct Scsi_Host *scsi_host = NULL;
4819         struct AdapterCtlBlk *acb = NULL;
4820         unsigned long io_port_base;
4821         unsigned int io_port_len;
4822         unsigned int irq;
4823         
4824         dprintkdbg(DBG_0, "Init one instance (%s)\n", pci_name(dev));
4825         banner_display();
4826
4827         if (pci_enable_device(dev))
4828         {
4829                 dprintkl(KERN_INFO, "PCI Enable device failed.\n");
4830                 return -ENODEV;
4831         }
4832         io_port_base = pci_resource_start(dev, 0) & PCI_BASE_ADDRESS_IO_MASK;
4833         io_port_len = pci_resource_len(dev, 0);
4834         irq = dev->irq;
4835         dprintkdbg(DBG_0, "IO_PORT=0x%04lx, IRQ=0x%x\n", io_port_base, dev->irq);
4836
4837         /* allocate scsi host information (includes out adapter) */
4838         scsi_host = scsi_host_alloc(&dc395x_driver_template,
4839                                     sizeof(struct AdapterCtlBlk));
4840         if (!scsi_host) {
4841                 dprintkl(KERN_INFO, "scsi_host_alloc failed\n");
4842                 goto fail;
4843         }
4844         acb = (struct AdapterCtlBlk*)scsi_host->hostdata;
4845         acb->scsi_host = scsi_host;
4846         acb->dev = dev;
4847
4848         /* initialise the adapter and everything we need */
4849         if (adapter_init(acb, io_port_base, io_port_len, irq)) {
4850                 dprintkl(KERN_INFO, "adapter init failed\n");
4851                 goto fail;
4852         }
4853
4854         pci_set_master(dev);
4855
4856         /* get the scsi mid level to scan for new devices on the bus */
4857         if (scsi_add_host(scsi_host, &dev->dev)) {
4858                 dprintkl(KERN_ERR, "scsi_add_host failed\n");
4859                 goto fail;
4860         }
4861         pci_set_drvdata(dev, scsi_host);
4862         scsi_scan_host(scsi_host);
4863                 
4864         return 0;
4865
4866 fail:
4867         if (acb != NULL)
4868                 adapter_uninit(acb);
4869         if (scsi_host != NULL)
4870                 scsi_host_put(scsi_host);
4871         pci_disable_device(dev);
4872         return -ENODEV;
4873 }
4874
4875
4876 /**
4877  * dc395x_remove_one - Called to remove a single instance of the
4878  * adapter.
4879  *
4880  * @dev: The PCI device to intialize.
4881  **/
4882 static void __devexit dc395x_remove_one(struct pci_dev *dev)
4883 {
4884         struct Scsi_Host *scsi_host = pci_get_drvdata(dev);
4885         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)(scsi_host->hostdata);
4886
4887         dprintkdbg(DBG_0, "dc395x_remove_one: acb=%p\n", acb);
4888
4889         scsi_remove_host(scsi_host);
4890         adapter_uninit(acb);
4891         pci_disable_device(dev);
4892         scsi_host_put(scsi_host);
4893         pci_set_drvdata(dev, NULL);
4894 }
4895
4896
4897 static struct pci_device_id dc395x_pci_table[] = {
4898         {
4899                 .vendor         = PCI_VENDOR_ID_TEKRAM,
4900                 .device         = PCI_DEVICE_ID_TEKRAM_TRMS1040,
4901                 .subvendor      = PCI_ANY_ID,
4902                 .subdevice      = PCI_ANY_ID,
4903          },
4904         {}                      /* Terminating entry */
4905 };
4906 MODULE_DEVICE_TABLE(pci, dc395x_pci_table);
4907
4908
4909 static struct pci_driver dc395x_driver = {
4910         .name           = DC395X_NAME,
4911         .id_table       = dc395x_pci_table,
4912         .probe          = dc395x_init_one,
4913         .remove         = __devexit_p(dc395x_remove_one),
4914 };
4915
4916
4917 /**
4918  * dc395x_module_init - Module initialization function
4919  *
4920  * Used by both module and built-in driver to initialise this driver.
4921  **/
4922 static int __init dc395x_module_init(void)
4923 {
4924         return pci_module_init(&dc395x_driver);
4925 }
4926
4927
4928 /**
4929  * dc395x_module_exit - Module cleanup function.
4930  **/
4931 static void __exit dc395x_module_exit(void)
4932 {
4933         pci_unregister_driver(&dc395x_driver);
4934 }
4935
4936
4937 module_init(dc395x_module_init);
4938 module_exit(dc395x_module_exit);
4939
4940 MODULE_AUTHOR("C.L. Huang / Erich Chen / Kurt Garloff");
4941 MODULE_DESCRIPTION("SCSI host adapter driver for Tekram TRM-S1040 based adapters: Tekram DC395 and DC315 series");
4942 MODULE_LICENSE("GPL");