git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-hcd.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
   6  *
   7  * [ Initialisation is based on Linus'  ]
   8  * [ uhci code and gregs ohci fragments ]
   9  * [ (C) Copyright 1999 Linus Torvalds  ]
  10  * [ (C) Copyright 1999 Gregory P. Smith]
  11  *
  12  *
  13  * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
  14  * interfaces (though some non-x86 Intel chips use it).  It supports
  15  * smarter hardware than UHCI.  A download link for the spec available
  16  * through the http://www.usb.org website.
  17  *
  18  * History:
  19  *
  20  * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
  21  * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
  22  * 2003/02/24 show registers in sysfs (Kevin Brosius)
  23  *
  24  * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
  25  *      bandwidth accounting; if debugging, show schedules in driverfs
  26  * 2002/07/19 fixes to management of ED and schedule state.
  27  * 2002/06/09 SA-1111 support (Christopher Hoover)
  28  * 2002/06/01 remember frame when HC won't see EDs any more; use that info
  29  *      to fix urb unlink races caused by interrupt latency assumptions;
  30  *      minor ED field and function naming updates
  31  * 2002/01/18 package as a patch for 2.5.3; this should match the
  32  *      2.4.17 kernel modulo some bugs being fixed.
  33  *
  34  * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
  35  *      from post-2.4.5 patches.
  36  * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
  37  * 2001/09/07 match PCI PM changes, errnos from Linus' tree
  38  * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
  39  *      pbook pci quirks gone (please fix pbook pci sw!) (db)
  40  *
  41  * 2001/04/08 Identify version on module load (gb)
  42  * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
  43         pci_map_single (db)
  44  * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
  45  * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
  46  *
  47  * 2000/09/26 fixed races in removing the private portion of the urb
  48  * 2000/09/07 disable bulk and control lists when unlinking the last
  49  *      endpoint descriptor in order to avoid unrecoverable errors on
  50  *      the Lucent chips. (rwc@sgi)
  51  * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
  52  *      urb unlink probs, indentation fixes
  53  * 2000/08/11 various oops fixes mostly affecting iso and cleanup from
  54  *      device unplugs.
  55  * 2000/06/28 use PCI hotplug framework, for better power management
  56  *      and for Cardbus support (David Brownell)
  57  * 2000/earlier:  fixes for NEC/Lucent chips; suspend/resume handling
  58  *      when the controller loses power; handle UE; cleanup; ...
  59  *
  60  * v5.2 1999/12/07 URB 3rd preview,
  61  * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
  62  * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume
  63  *      i386: HUB, Keyboard, Mouse, Printer
  64  *
  65  * v4.3 1999/10/27 multiple HCs, bulk_request
  66  * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
  67  * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
  68  * v4.0 1999/08/18
  69  * v3.0 1999/06/25
  70  * v2.1 1999/05/09  code clean up
  71  * v2.0 1999/05/04
  72  * v1.0 1999/04/27 initial release
  73  *
  74  * This file is licenced under the GPL.
  75  */
  76
  77 #include <linux/module.h>
  78 #include <linux/moduleparam.h>
  79 #include <linux/pci.h>
  80 #include <linux/kernel.h>
  81 #include <linux/delay.h>
  82 #include <linux/ioport.h>
  83 #include <linux/sched.h>
  84 #include <linux/slab.h>
  85 #include <linux/smp_lock.h>
  86 #include <linux/errno.h>
  87 #include <linux/init.h>
  88 #include <linux/timer.h>
  89 #include <linux/list.h>
  90 #include <linux/usb.h>
  91 #include <linux/usb/otg.h>
  92 #include <linux/dma-mapping.h>
  93 #include <linux/dmapool.h>
  94 #include <linux/reboot.h>
  95
  96 #include <asm/io.h>
  97 #include <asm/irq.h>
  98 #include <asm/system.h>
  99 #include <asm/unaligned.h>
 100 #include <asm/byteorder.h>
 101
 102 #include "../core/hcd.h"
 103
 104 #define DRIVER_VERSION "2006 August 04"
 105 #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
 106 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
 107
 108 /*-------------------------------------------------------------------------*/
 109
 110 #undef OHCI_VERBOSE_DEBUG       /* not always helpful */
 111
 112 /* For initializing controller (mask in an HCFS mode too) */
 113 #define OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
 114 #define OHCI_INTR_INIT \
 115                 (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \
 116                 | OHCI_INTR_RD | OHCI_INTR_WDH)
 117
 118 #ifdef __hppa__
 119 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
 120 #define IR_DISABLE
 121 #endif
 122
 123 #ifdef CONFIG_ARCH_OMAP
 124 /* OMAP doesn't support IR (no SMM; not needed) */
 125 #define IR_DISABLE
 126 #endif
 127
 128 /*-------------------------------------------------------------------------*/
 129
 130 static const char       hcd_name [] = "ohci_hcd";
 131
 132 #define STATECHANGE_DELAY       msecs_to_jiffies(300)
 133
 134 #include "ohci.h"
 135
 136 static void ohci_dump (struct ohci_hcd *ohci, int verbose);
 137 static int ohci_init (struct ohci_hcd *ohci);
 138 static void ohci_stop (struct usb_hcd *hcd);
 139
 140 #include "ohci-hub.c"
 141 #include "ohci-dbg.c"
 142 #include "ohci-mem.c"
 143 #include "ohci-q.c"
 144
 145
 146 /*
 147  * On architectures with edge-triggered interrupts we must never return
 148  * IRQ_NONE.
 149  */
 150 #if defined(CONFIG_SA1111)  /* ... or other edge-triggered systems */
 151 #define IRQ_NOTMINE     IRQ_HANDLED
 152 #else
 153 #define IRQ_NOTMINE     IRQ_NONE
 154 #endif
 155
 156
 157 /* Some boards misreport power switching/overcurrent */
 158 static int distrust_firmware = 1;
 159 module_param (distrust_firmware, bool, 0);
 160 MODULE_PARM_DESC (distrust_firmware,
 161         "true to distrust firmware power/overcurrent setup");
 162
 163 /* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
 164 static int no_handshake = 0;
 165 module_param (no_handshake, bool, 0);
 166 MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
 167
 168 /*-------------------------------------------------------------------------*/
 169
 170 /*
 171  * queue up an urb for anything except the root hub
 172  */
 173 static int ohci_urb_enqueue (
 174         struct usb_hcd  *hcd,
 175         struct usb_host_endpoint *ep,
 176         struct urb      *urb,
 177         gfp_t           mem_flags
 178 ) {
 179         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 180         struct ed       *ed;
 181         urb_priv_t      *urb_priv;
 182         unsigned int    pipe = urb->pipe;
 183         int             i, size = 0;
 184         unsigned long   flags;
 185         int             retval = 0;
 186
 187 #ifdef OHCI_VERBOSE_DEBUG
 188         urb_print (urb, "SUB", usb_pipein (pipe));
 189 #endif
 190
 191         /* every endpoint has a ed, locate and maybe (re)initialize it */
 192         if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
 193                 return -ENOMEM;
 194
 195         /* for the private part of the URB we need the number of TDs (size) */
 196         switch (ed->type) {
 197                 case PIPE_CONTROL:
 198                         /* td_submit_urb() doesn't yet handle these */
 199                         if (urb->transfer_buffer_length > 4096)
 200                                 return -EMSGSIZE;
 201
 202                         /* 1 TD for setup, 1 for ACK, plus ... */
 203                         size = 2;
 204                         /* FALLTHROUGH */
 205                 // case PIPE_INTERRUPT:
 206                 // case PIPE_BULK:
 207                 default:
 208                         /* one TD for every 4096 Bytes (can be upto 8K) */
 209                         size += urb->transfer_buffer_length / 4096;
 210                         /* ... and for any remaining bytes ... */
 211                         if ((urb->transfer_buffer_length % 4096) != 0)
 212                                 size++;
 213                         /* ... and maybe a zero length packet to wrap it up */
 214                         if (size == 0)
 215                                 size++;
 216                         else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
 217                                 && (urb->transfer_buffer_length
 218                                         % usb_maxpacket (urb->dev, pipe,
 219                                                 usb_pipeout (pipe))) == 0)
 220                                 size++;
 221                         break;
 222                 case PIPE_ISOCHRONOUS: /* number of packets from URB */
 223                         size = urb->number_of_packets;
 224                         break;
 225         }
 226
 227         /* allocate the private part of the URB */
 228         urb_priv = kmalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
 229                         mem_flags);
 230         if (!urb_priv)
 231                 return -ENOMEM;
 232         memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
 233         INIT_LIST_HEAD (&urb_priv->pending);
 234         urb_priv->length = size;
 235         urb_priv->ed = ed;
 236
 237         /* allocate the TDs (deferring hash chain updates) */
 238         for (i = 0; i < size; i++) {
 239                 urb_priv->td [i] = td_alloc (ohci, mem_flags);
 240                 if (!urb_priv->td [i]) {
 241                         urb_priv->length = i;
 242                         urb_free_priv (ohci, urb_priv);
 243                         return -ENOMEM;
 244                 }
 245         }
 246
 247         spin_lock_irqsave (&ohci->lock, flags);
 248
 249         /* don't submit to a dead HC */
 250         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
 251                 retval = -ENODEV;
 252                 goto fail;
 253         }
 254         if (!HC_IS_RUNNING(hcd->state)) {
 255                 retval = -ENODEV;
 256                 goto fail;
 257         }
 258
 259         /* in case of unlink-during-submit */
 260         spin_lock (&urb->lock);
 261         if (urb->status != -EINPROGRESS) {
 262                 spin_unlock (&urb->lock);
 263                 urb->hcpriv = urb_priv;
 264                 finish_urb (ohci, urb);
 265                 retval = 0;
 266                 goto fail;
 267         }
 268
 269         /* schedule the ed if needed */
 270         if (ed->state == ED_IDLE) {
 271                 retval = ed_schedule (ohci, ed);
 272                 if (retval < 0)
 273                         goto fail0;
 274                 if (ed->type == PIPE_ISOCHRONOUS) {
 275                         u16     frame = ohci_frame_no(ohci);
 276
 277                         /* delay a few frames before the first TD */
 278                         frame += max_t (u16, 8, ed->interval);
 279                         frame &= ~(ed->interval - 1);
 280                         frame |= ed->branch;
 281                         urb->start_frame = frame;
 282
 283                         /* yes, only URB_ISO_ASAP is supported, and
 284                          * urb->start_frame is never used as input.
 285                          */
 286                 }
 287         } else if (ed->type == PIPE_ISOCHRONOUS)
 288                 urb->start_frame = ed->last_iso + ed->interval;
 289
 290         /* fill the TDs and link them to the ed; and
 291          * enable that part of the schedule, if needed
 292          * and update count of queued periodic urbs
 293          */
 294         urb->hcpriv = urb_priv;
 295         td_submit_urb (ohci, urb);
 296
 297 fail0:
 298         spin_unlock (&urb->lock);
 299 fail:
 300         if (retval)
 301                 urb_free_priv (ohci, urb_priv);
 302         spin_unlock_irqrestore (&ohci->lock, flags);
 303         return retval;
 304 }
 305
 306 /*
 307  * decouple the URB from the HC queues (TDs, urb_priv); it's
 308  * already marked using urb->status.  reporting is always done
 309  * asynchronously, and we might be dealing with an urb that's
 310  * partially transferred, or an ED with other urbs being unlinked.
 311  */
 312 static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
 313 {
 314         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 315         unsigned long           flags;
 316
 317 #ifdef OHCI_VERBOSE_DEBUG
 318         urb_print (urb, "UNLINK", 1);
 319 #endif
 320
 321         spin_lock_irqsave (&ohci->lock, flags);
 322         if (HC_IS_RUNNING(hcd->state)) {
 323                 urb_priv_t  *urb_priv;
 324
 325                 /* Unless an IRQ completed the unlink while it was being
 326                  * handed to us, flag it for unlink and giveback, and force
 327                  * some upcoming INTR_SF to call finish_unlinks()
 328                  */
 329                 urb_priv = urb->hcpriv;
 330                 if (urb_priv) {
 331                         if (urb_priv->ed->state == ED_OPER)
 332                                 start_ed_unlink (ohci, urb_priv->ed);
 333                 }
 334         } else {
 335                 /*
 336                  * with HC dead, we won't respect hc queue pointers
 337                  * any more ... just clean up every urb's memory.
 338                  */
 339                 if (urb->hcpriv)
 340                         finish_urb (ohci, urb);
 341         }
 342         spin_unlock_irqrestore (&ohci->lock, flags);
 343         return 0;
 344 }
 345
 346 /*-------------------------------------------------------------------------*/
 347
 348 /* frees config/altsetting state for endpoints,
 349  * including ED memory, dummy TD, and bulk/intr data toggle
 350  */
 351
 352 static void
 353 ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 354 {
 355         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 356         unsigned long           flags;
 357         struct ed               *ed = ep->hcpriv;
 358         unsigned                limit = 1000;
 359
 360         /* ASSERT:  any requests/urbs are being unlinked */
 361         /* ASSERT:  nobody can be submitting urbs for this any more */
 362
 363         if (!ed)
 364                 return;
 365
 366 rescan:
 367         spin_lock_irqsave (&ohci->lock, flags);
 368
 369         if (!HC_IS_RUNNING (hcd->state)) {
 370 sanitize:
 371                 ed->state = ED_IDLE;
 372                 finish_unlinks (ohci, 0);
 373         }
 374
 375         switch (ed->state) {
 376         case ED_UNLINK:         /* wait for hw to finish? */
 377                 /* major IRQ delivery trouble loses INTR_SF too... */
 378                 if (limit-- == 0) {
 379                         ohci_warn (ohci, "IRQ INTR_SF lossage\n");
 380                         goto sanitize;
 381                 }
 382                 spin_unlock_irqrestore (&ohci->lock, flags);
 383                 schedule_timeout_uninterruptible(1);
 384                 goto rescan;
 385         case ED_IDLE:           /* fully unlinked */
 386                 if (list_empty (&ed->td_list)) {
 387                         td_free (ohci, ed->dummy);
 388                         ed_free (ohci, ed);
 389                         break;
 390                 }
 391                 /* else FALL THROUGH */
 392         default:
 393                 /* caller was supposed to have unlinked any requests;
 394                  * that's not our job.  can't recover; must leak ed.
 395                  */
 396                 ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n",
 397                         ed, ep->desc.bEndpointAddress, ed->state,
 398                         list_empty (&ed->td_list) ? "" : " (has tds)");
 399                 td_free (ohci, ed->dummy);
 400                 break;
 401         }
 402         ep->hcpriv = NULL;
 403         spin_unlock_irqrestore (&ohci->lock, flags);
 404         return;
 405 }
 406
 407 static int ohci_get_frame (struct usb_hcd *hcd)
 408 {
 409         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 410
 411         return ohci_frame_no(ohci);
 412 }
 413
 414 static void ohci_usb_reset (struct ohci_hcd *ohci)
 415 {
 416         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 417         ohci->hc_control &= OHCI_CTRL_RWC;
 418         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 419 }
 420
 421 /* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
 422  * other cases where the next software may expect clean state from the
 423  * "firmware".  this is bus-neutral, unlike shutdown() methods.
 424  */
 425 static void
 426 ohci_shutdown (struct usb_hcd *hcd)
 427 {
 428         struct ohci_hcd *ohci;
 429
 430         ohci = hcd_to_ohci (hcd);
 431         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 432         ohci_usb_reset (ohci);
 433         /* flush the writes */
 434         (void) ohci_readl (ohci, &ohci->regs->control);
 435 }
 436
 437 /*-------------------------------------------------------------------------*
 438  * HC functions
 439  *-------------------------------------------------------------------------*/
 440
 441 /* init memory, and kick BIOS/SMM off */
 442
 443 static int ohci_init (struct ohci_hcd *ohci)
 444 {
 445         int ret;
 446         struct usb_hcd *hcd = ohci_to_hcd(ohci);
 447
 448         disable (ohci);
 449         ohci->regs = hcd->regs;
 450
 451         /* REVISIT this BIOS handshake is now moved into PCI "quirks", and
 452          * was never needed for most non-PCI systems ... remove the code?
 453          */
 454
 455 #ifndef IR_DISABLE
 456         /* SMM owns the HC?  not for long! */
 457         if (!no_handshake && ohci_readl (ohci,
 458                                         &ohci->regs->control) & OHCI_CTRL_IR) {
 459                 u32 temp;
 460
 461                 ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");
 462
 463                 /* this timeout is arbitrary.  we make it long, so systems
 464                  * depending on usb keyboards may be usable even if the
 465                  * BIOS/SMM code seems pretty broken.
 466                  */
 467                 temp = 500;     /* arbitrary: five seconds */
 468
 469                 ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
 470                 ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus);
 471                 while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) {
 472                         msleep (10);
 473                         if (--temp == 0) {
 474                                 ohci_err (ohci, "USB HC takeover failed!"
 475                                         "  (BIOS/SMM bug)\n");
 476                                 return -EBUSY;
 477                         }
 478                 }
 479                 ohci_usb_reset (ohci);
 480         }
 481 #endif
 482
 483         /* Disable HC interrupts */
 484         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 485
 486         /* flush the writes, and save key bits like RWC */
 487         if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
 488                 ohci->hc_control |= OHCI_CTRL_RWC;
 489
 490         /* Read the number of ports unless overridden */
 491         if (ohci->num_ports == 0)
 492                 ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
 493
 494         if (ohci->hcca)
 495                 return 0;
 496
 497         ohci->hcca = dma_alloc_coherent (hcd->self.controller,
 498                         sizeof *ohci->hcca, &ohci->hcca_dma, 0);
 499         if (!ohci->hcca)
 500                 return -ENOMEM;
 501
 502         if ((ret = ohci_mem_init (ohci)) < 0)
 503                 ohci_stop (hcd);
 504         else {
 505                 create_debug_files (ohci);
 506         }
 507
 508         return ret;
 509 }
 510
 511 /*-------------------------------------------------------------------------*/
 512
 513 /* Start an OHCI controller, set the BUS operational
 514  * resets USB and controller
 515  * enable interrupts
 516  */
 517 static int ohci_run (struct ohci_hcd *ohci)
 518 {
 519         u32                     mask, temp;
 520         int                     first = ohci->fminterval == 0;
 521         struct usb_hcd          *hcd = ohci_to_hcd(ohci);
 522
 523         disable (ohci);
 524
 525         /* boot firmware should have set this up (5.1.1.3.1) */
 526         if (first) {
 527
 528                 temp = ohci_readl (ohci, &ohci->regs->fminterval);
 529                 ohci->fminterval = temp & 0x3fff;
 530                 if (ohci->fminterval != FI)
 531                         ohci_dbg (ohci, "fminterval delta %d\n",
 532                                 ohci->fminterval - FI);
 533                 ohci->fminterval |= FSMP (ohci->fminterval) << 16;
 534                 /* also: power/overcurrent flags in roothub.a */
 535         }
 536
 537         /* Reset USB nearly "by the book".  RemoteWakeupConnected was
 538          * saved if boot firmware (BIOS/SMM/...) told us it's connected,
 539          * or if bus glue did the same (e.g. for PCI add-in cards with
 540          * PCI PM support).
 541          */
 542         ohci_dbg (ohci, "resetting from state '%s', control = 0x%x\n",
 543                         hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
 544                         ohci_readl (ohci, &ohci->regs->control));
 545         if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
 546                         && !device_may_wakeup(hcd->self.controller))
 547                 device_init_wakeup(hcd->self.controller, 1);
 548
 549         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 550         case OHCI_USB_OPER:
 551                 temp = 0;
 552                 break;
 553         case OHCI_USB_SUSPEND:
 554         case OHCI_USB_RESUME:
 555                 ohci->hc_control &= OHCI_CTRL_RWC;
 556                 ohci->hc_control |= OHCI_USB_RESUME;
 557                 temp = 10 /* msec wait */;
 558                 break;
 559         // case OHCI_USB_RESET:
 560         default:
 561                 ohci->hc_control &= OHCI_CTRL_RWC;
 562                 ohci->hc_control |= OHCI_USB_RESET;
 563                 temp = 50 /* msec wait */;
 564                 break;
 565         }
 566         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 567         // flush the writes
 568         (void) ohci_readl (ohci, &ohci->regs->control);
 569         msleep(temp);
 570         temp = roothub_a (ohci);
 571         if (!(temp & RH_A_NPS)) {
 572                 /* power down each port */
 573                 for (temp = 0; temp < ohci->num_ports; temp++)
 574                         ohci_writel (ohci, RH_PS_LSDA,
 575                                 &ohci->regs->roothub.portstatus [temp]);
 576         }
 577         // flush those writes
 578         (void) ohci_readl (ohci, &ohci->regs->control);
 579         memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
 580
 581         /* 2msec timelimit here means no irqs/preempt */
 582         spin_lock_irq (&ohci->lock);
 583
 584 retry:
 585         /* HC Reset requires max 10 us delay */
 586         ohci_writel (ohci, OHCI_HCR,  &ohci->regs->cmdstatus);
 587         temp = 30;      /* ... allow extra time */
 588         while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
 589                 if (--temp == 0) {
 590                         spin_unlock_irq (&ohci->lock);
 591                         ohci_err (ohci, "USB HC reset timed out!\n");
 592                         return -1;
 593                 }
 594                 udelay (1);
 595         }
 596
 597         /* now we're in the SUSPEND state ... must go OPERATIONAL
 598          * within 2msec else HC enters RESUME
 599          *
 600          * ... but some hardware won't init fmInterval "by the book"
 601          * (SiS, OPTi ...), so reset again instead.  SiS doesn't need
 602          * this if we write fmInterval after we're OPERATIONAL.
 603          * Unclear about ALi, ServerWorks, and others ... this could
 604          * easily be a longstanding bug in chip init on Linux.
 605          */
 606         if (ohci->flags & OHCI_QUIRK_INITRESET) {
 607                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 608                 // flush those writes
 609                 (void) ohci_readl (ohci, &ohci->regs->control);
 610         }
 611
 612         /* Tell the controller where the control and bulk lists are
 613          * The lists are empty now. */
 614         ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
 615         ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
 616
 617         /* a reset clears this */
 618         ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
 619
 620         periodic_reinit (ohci);
 621
 622         /* some OHCI implementations are finicky about how they init.
 623          * bogus values here mean not even enumeration could work.
 624          */
 625         if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0
 626                         || !ohci_readl (ohci, &ohci->regs->periodicstart)) {
 627                 if (!(ohci->flags & OHCI_QUIRK_INITRESET)) {
 628                         ohci->flags |= OHCI_QUIRK_INITRESET;
 629                         ohci_dbg (ohci, "enabling initreset quirk\n");
 630                         goto retry;
 631                 }
 632                 spin_unlock_irq (&ohci->lock);
 633                 ohci_err (ohci, "init err (%08x %04x)\n",
 634                         ohci_readl (ohci, &ohci->regs->fminterval),
 635                         ohci_readl (ohci, &ohci->regs->periodicstart));
 636                 return -EOVERFLOW;
 637         }
 638
 639         /* use rhsc irqs after khubd is fully initialized */
 640         hcd->poll_rh = 1;
 641         hcd->uses_new_polling = 1;
 642
 643         /* start controller operations */
 644         ohci->hc_control &= OHCI_CTRL_RWC;
 645         ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
 646         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 647         hcd->state = HC_STATE_RUNNING;
 648
 649         /* wake on ConnectStatusChange, matching external hubs */
 650         ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
 651
 652         /* Choose the interrupts we care about now, others later on demand */
 653         mask = OHCI_INTR_INIT;
 654         ohci_writel (ohci, ~0, &ohci->regs->intrstatus);
 655         ohci_writel (ohci, mask, &ohci->regs->intrenable);
 656
 657         /* handle root hub init quirks ... */
 658         temp = roothub_a (ohci);
 659         temp &= ~(RH_A_PSM | RH_A_OCPM);
 660         if (ohci->flags & OHCI_QUIRK_SUPERIO) {
 661                 /* NSC 87560 and maybe others */
 662                 temp |= RH_A_NOCP;
 663                 temp &= ~(RH_A_POTPGT | RH_A_NPS);
 664                 ohci_writel (ohci, temp, &ohci->regs->roothub.a);
 665         } else if ((ohci->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
 666                 /* hub power always on; required for AMD-756 and some
 667                  * Mac platforms.  ganged overcurrent reporting, if any.
 668                  */
 669                 temp |= RH_A_NPS;
 670                 ohci_writel (ohci, temp, &ohci->regs->roothub.a);
 671         }
 672         ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
 673         ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM,
 674                                                 &ohci->regs->roothub.b);
 675         // flush those writes
 676         (void) ohci_readl (ohci, &ohci->regs->control);
 677
 678         ohci->next_statechange = jiffies + STATECHANGE_DELAY;
 679         spin_unlock_irq (&ohci->lock);
 680
 681         // POTPGT delay is bits 24-31, in 2 ms units.
 682         mdelay ((temp >> 23) & 0x1fe);
 683         hcd->state = HC_STATE_RUNNING;
 684
 685         ohci_dump (ohci, 1);
 686
 687         return 0;
 688 }
 689
 690 /*-------------------------------------------------------------------------*/
 691
 692 /* an interrupt happens */
 693
 694 static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 695 {
 696         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 697         struct ohci_regs __iomem *regs = ohci->regs;
 698         int                     ints;
 699
 700         /* we can eliminate a (slow) ohci_readl()
 701            if _only_ WDH caused this irq */
 702         if ((ohci->hcca->done_head != 0)
 703                         && ! (hc32_to_cpup (ohci, &ohci->hcca->done_head)
 704                                 & 0x01)) {
 705                 ints =  OHCI_INTR_WDH;
 706
 707         /* cardbus/... hardware gone before remove() */
 708         } else if ((ints = ohci_readl (ohci, &regs->intrstatus)) == ~(u32)0) {
 709                 disable (ohci);
 710                 ohci_dbg (ohci, "device removed!\n");
 711                 return IRQ_HANDLED;
 712
 713         /* interrupt for some other device? */
 714         } else if ((ints &= ohci_readl (ohci, &regs->intrenable)) == 0) {
 715                 return IRQ_NOTMINE;
 716         }
 717
 718         if (ints & OHCI_INTR_UE) {
 719                 disable (ohci);
 720                 ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
 721                 // e.g. due to PCI Master/Target Abort
 722
 723                 ohci_dump (ohci, 1);
 724                 ohci_usb_reset (ohci);
 725         }
 726
 727         if (ints & OHCI_INTR_RHSC) {
 728                 ohci_vdbg(ohci, "rhsc\n");
 729                 ohci->next_statechange = jiffies + STATECHANGE_DELAY;
 730                 ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
 731                                 &regs->intrstatus);
 732
 733                 /* NOTE: Vendors didn't always make the same implementation
 734                  * choices for RHSC.  Many followed the spec; RHSC triggers
 735                  * on an edge, like setting and maybe clearing a port status
 736                  * change bit.  With others it's level-triggered, active
 737                  * until khubd clears all the port status change bits.  We'll
 738                  * always disable it here and rely on polling until khubd
 739                  * re-enables it.
 740                  */
 741                 ohci_writel(ohci, OHCI_INTR_RHSC, &regs->intrdisable);
 742                 usb_hcd_poll_rh_status(hcd);
 743         }
 744
 745         /* For connect and disconnect events, we expect the controller
 746          * to turn on RHSC along with RD.  But for remote wakeup events
 747          * this might not happen.
 748          */
 749         else if (ints & OHCI_INTR_RD) {
 750                 ohci_vdbg(ohci, "resume detect\n");
 751                 ohci_writel(ohci, OHCI_INTR_RD, &regs->intrstatus);
 752                 hcd->poll_rh = 1;
 753                 if (ohci->autostop) {
 754                         spin_lock (&ohci->lock);
 755                         ohci_rh_resume (ohci);
 756                         spin_unlock (&ohci->lock);
 757                 } else
 758                         usb_hcd_resume_root_hub(hcd);
 759         }
 760
 761         if (ints & OHCI_INTR_WDH) {
 762                 if (HC_IS_RUNNING(hcd->state))
 763                         ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrdisable);
 764                 spin_lock (&ohci->lock);
 765                 dl_done_list (ohci);
 766                 spin_unlock (&ohci->lock);
 767                 if (HC_IS_RUNNING(hcd->state))
 768                         ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable);
 769         }
 770
 771         /* could track INTR_SO to reduce available PCI/... bandwidth */
 772
 773         /* handle any pending URB/ED unlinks, leaving INTR_SF enabled
 774          * when there's still unlinking to be done (next frame).
 775          */
 776         spin_lock (&ohci->lock);
 777         if (ohci->ed_rm_list)
 778                 finish_unlinks (ohci, ohci_frame_no(ohci));
 779         if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
 780                         && HC_IS_RUNNING(hcd->state))
 781                 ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
 782         spin_unlock (&ohci->lock);
 783
 784         if (HC_IS_RUNNING(hcd->state)) {
 785                 ohci_writel (ohci, ints, &regs->intrstatus);
 786                 ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
 787                 // flush those writes
 788                 (void) ohci_readl (ohci, &ohci->regs->control);
 789         }
 790
 791         return IRQ_HANDLED;
 792 }
 793
 794 /*-------------------------------------------------------------------------*/
 795
 796 static void ohci_stop (struct usb_hcd *hcd)
 797 {
 798         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 799
 800         ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
 801                 hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
 802                 hcd->state);
 803         ohci_dump (ohci, 1);
 804
 805         flush_scheduled_work();
 806
 807         ohci_usb_reset (ohci);
 808         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 809         free_irq(hcd->irq, hcd);
 810         hcd->irq = -1;
 811
 812         remove_debug_files (ohci);
 813         ohci_mem_cleanup (ohci);
 814         if (ohci->hcca) {
 815                 dma_free_coherent (hcd->self.controller,
 816                                 sizeof *ohci->hcca,
 817                                 ohci->hcca, ohci->hcca_dma);
 818                 ohci->hcca = NULL;
 819                 ohci->hcca_dma = 0;
 820         }
 821 }
 822
 823 /*-------------------------------------------------------------------------*/
 824
 825 /* must not be called from interrupt context */
 826
 827 #ifdef  CONFIG_PM
 828
 829 static int ohci_restart (struct ohci_hcd *ohci)
 830 {
 831         int temp;
 832         int i;
 833         struct urb_priv *priv;
 834
 835         /* mark any devices gone, so they do nothing till khubd disconnects.
 836          * recycle any "live" eds/tds (and urbs) right away.
 837          * later, khubd disconnect processing will recycle the other state,
 838          * (either as disconnect/reconnect, or maybe someday as a reset).
 839          */
 840         spin_lock_irq(&ohci->lock);
 841         disable (ohci);
 842         usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
 843         if (!list_empty (&ohci->pending))
 844                 ohci_dbg(ohci, "abort schedule...\n");
 845         list_for_each_entry (priv, &ohci->pending, pending) {
 846                 struct urb      *urb = priv->td[0]->urb;
 847                 struct ed       *ed = priv->ed;
 848
 849                 switch (ed->state) {
 850                 case ED_OPER:
 851                         ed->state = ED_UNLINK;
 852                         ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE);
 853                         ed_deschedule (ohci, ed);
 854
 855                         ed->ed_next = ohci->ed_rm_list;
 856                         ed->ed_prev = NULL;
 857                         ohci->ed_rm_list = ed;
 858                         /* FALLTHROUGH */
 859                 case ED_UNLINK:
 860                         break;
 861                 default:
 862                         ohci_dbg(ohci, "bogus ed %p state %d\n",
 863                                         ed, ed->state);
 864                 }
 865
 866                 spin_lock (&urb->lock);
 867                 urb->status = -ESHUTDOWN;
 868                 spin_unlock (&urb->lock);
 869         }
 870         finish_unlinks (ohci, 0);
 871         spin_unlock_irq(&ohci->lock);
 872
 873         /* paranoia, in case that didn't work: */
 874
 875         /* empty the interrupt branches */
 876         for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
 877         for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
 878
 879         /* no EDs to remove */
 880         ohci->ed_rm_list = NULL;
 881
 882         /* empty control and bulk lists */
 883         ohci->ed_controltail = NULL;
 884         ohci->ed_bulktail    = NULL;
 885
 886         if ((temp = ohci_run (ohci)) < 0) {
 887                 ohci_err (ohci, "can't restart, %d\n", temp);
 888                 return temp;
 889         } else {
 890                 /* here we "know" root ports should always stay powered,
 891                  * and that if we try to turn them back on the root hub
 892                  * will respond to CSC processing.
 893                  */
 894                 i = ohci->num_ports;
 895                 while (i--)
 896                         ohci_writel (ohci, RH_PS_PSS,
 897                                 &ohci->regs->roothub.portstatus [i]);
 898                 ohci_dbg (ohci, "restart complete\n");
 899         }
 900         return 0;
 901 }
 902 #endif
 903
 904 /*-------------------------------------------------------------------------*/
 905
 906 #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
 907
 908 MODULE_AUTHOR (DRIVER_AUTHOR);
 909 MODULE_DESCRIPTION (DRIVER_INFO);
 910 MODULE_LICENSE ("GPL");
 911
 912 #ifdef CONFIG_PCI
 913 #include "ohci-pci.c"
 914 #endif
 915
 916 #ifdef CONFIG_SA1111
 917 #include "ohci-sa1111.c"
 918 #endif
 919
 920 #ifdef CONFIG_ARCH_S3C2410
 921 #include "ohci-s3c2410.c"
 922 #endif
 923
 924 #ifdef CONFIG_ARCH_OMAP
 925 #include "ohci-omap.c"
 926 #endif
 927
 928 #ifdef CONFIG_ARCH_LH7A404
 929 #include "ohci-lh7a404.c"
 930 #endif
 931
 932 #ifdef CONFIG_PXA27x
 933 #include "ohci-pxa27x.c"
 934 #endif
 935
 936 #ifdef CONFIG_ARCH_EP93XX
 937 #include "ohci-ep93xx.c"
 938 #endif
 939
 940 #ifdef CONFIG_SOC_AU1X00
 941 #include "ohci-au1xxx.c"
 942 #endif
 943
 944 #ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
 945 #include "ohci-ppc-soc.c"
 946 #endif
 947
 948 #ifdef CONFIG_ARCH_AT91
 949 #include "ohci-at91.c"
 950 #endif
 951
 952 #ifdef CONFIG_ARCH_PNX4008
 953 #include "ohci-pnx4008.c"
 954 #endif
 955
 956 #if !(defined(CONFIG_PCI) \
 957       || defined(CONFIG_SA1111) \
 958       || defined(CONFIG_ARCH_S3C2410) \
 959       || defined(CONFIG_ARCH_OMAP) \
 960       || defined (CONFIG_ARCH_LH7A404) \
 961       || defined (CONFIG_PXA27x) \
 962       || defined (CONFIG_ARCH_EP93XX) \
 963       || defined (CONFIG_SOC_AU1X00) \
 964       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
 965       || defined (CONFIG_ARCH_AT91) \
 966       || defined (CONFIG_ARCH_PNX4008) \
 967         )
 968 #error "missing bus glue for ohci-hcd"
 969 #endif