git.oblomov.eu Git - linux-2.6/blob - Documentation/ABI/testing/sysfs-class-regulator

   1 What:           /sys/class/regulator/.../state
   2 Date:           April 2008
   3 KernelVersion:  2.6.26
   4 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
   5 Description:
   6                 Each regulator directory will contain a field called
   7                 state. This holds the regulator output state.
   8
   9                 This will be one of the following strings:
  10
  11                 'enabled'
  12                 'disabled'
  13                 'unknown'
  14
  15                 'enabled' means the regulator output is ON and is supplying
  16                 power to the system.
  17
  18                 'disabled' means the regulator output is OFF and is not
  19                 supplying power to the system..
  20
  21                 'unknown' means software cannot determine the state.
  22
  23                 NOTE: this field can be used in conjunction with microvolts
  24                 and microamps to determine regulator output levels.
  25
  26
  27 What:           /sys/class/regulator/.../type
  28 Date:           April 2008
  29 KernelVersion:  2.6.26
  30 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
  31 Description:
  32                 Each regulator directory will contain a field called
  33                 type. This holds the regulator type.
  34
  35                 This will be one of the following strings:
  36
  37                 'voltage'
  38                 'current'
  39                 'unknown'
  40
  41                 'voltage' means the regulator output voltage can be controlled
  42                 by software.
  43
  44                 'current' means the regulator output current limit can be
  45                 controlled by software.
  46
  47                 'unknown' means software cannot control either voltage or
  48                 current limit.
  49
  50
  51 What:           /sys/class/regulator/.../microvolts
  52 Date:           April 2008
  53 KernelVersion:  2.6.26
  54 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
  55 Description:
  56                 Each regulator directory will contain a field called
  57                 microvolts. This holds the regulator output voltage setting
  58                 measured in microvolts (i.e. E-6 Volts).
  59
  60                 NOTE: This value should not be used to determine the regulator
  61                 output voltage level as this value is the same regardless of
  62                 whether the regulator is enabled or disabled.
  63
  64
  65 What:           /sys/class/regulator/.../microamps
  66 Date:           April 2008
  67 KernelVersion:  2.6.26
  68 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
  69 Description:
  70                 Each regulator directory will contain a field called
  71                 microamps. This holds the regulator output current limit
  72                 setting measured in microamps (i.e. E-6 Amps).
  73
  74                 NOTE: This value should not be used to determine the regulator
  75                 output current level as this value is the same regardless of
  76                 whether the regulator is enabled or disabled.
  77
  78
  79 What:           /sys/class/regulator/.../opmode
  80 Date:           April 2008
  81 KernelVersion:  2.6.26
  82 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
  83 Description:
  84                 Each regulator directory will contain a field called
  85                 opmode. This holds the regulator operating mode setting.
  86
  87                 The opmode value can be one of the following strings:
  88
  89                 'fast'
  90                 'normal'
  91                 'idle'
  92                 'standby'
  93                 'unknown'
  94
  95                 The modes are described in include/linux/regulator/regulator.h
  96
  97                 NOTE: This value should not be used to determine the regulator
  98                 output operating mode as this value is the same regardless of
  99                 whether the regulator is enabled or disabled.
 100
 101
 102 What:           /sys/class/regulator/.../min_microvolts
 103 Date:           April 2008
 104 KernelVersion:  2.6.26
 105 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 106 Description:
 107                 Each regulator directory will contain a field called
 108                 min_microvolts. This holds the minimum safe working regulator
 109                 output voltage setting for this domain measured in microvolts.
 110
 111                 NOTE: this will return the string 'constraint not defined' if
 112                 the power domain has no min microvolts constraint defined by
 113                 platform code.
 114
 115
 116 What:           /sys/class/regulator/.../max_microvolts
 117 Date:           April 2008
 118 KernelVersion:  2.6.26
 119 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 120 Description:
 121                 Each regulator directory will contain a field called
 122                 max_microvolts. This holds the maximum safe working regulator
 123                 output voltage setting for this domain measured in microvolts.
 124
 125                 NOTE: this will return the string 'constraint not defined' if
 126                 the power domain has no max microvolts constraint defined by
 127                 platform code.
 128
 129
 130 What:           /sys/class/regulator/.../min_microamps
 131 Date:           April 2008
 132 KernelVersion:  2.6.26
 133 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 134 Description:
 135                 Each regulator directory will contain a field called
 136                 min_microamps. This holds the minimum safe working regulator
 137                 output current limit setting for this domain measured in
 138                 microamps.
 139
 140                 NOTE: this will return the string 'constraint not defined' if
 141                 the power domain has no min microamps constraint defined by
 142                 platform code.
 143
 144
 145 What:           /sys/class/regulator/.../max_microamps
 146 Date:           April 2008
 147 KernelVersion:  2.6.26
 148 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 149 Description:
 150                 Each regulator directory will contain a field called
 151                 max_microamps. This holds the maximum safe working regulator
 152                 output current limit setting for this domain measured in
 153                 microamps.
 154
 155                 NOTE: this will return the string 'constraint not defined' if
 156                 the power domain has no max microamps constraint defined by
 157                 platform code.
 158
 159
 160 What:           /sys/class/regulator/.../num_users
 161 Date:           April 2008
 162 KernelVersion:  2.6.26
 163 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 164 Description:
 165                 Each regulator directory will contain a field called
 166                 num_users. This holds the number of consumer devices that
 167                 have called regulator_enable() on this regulator.
 168
 169
 170 What:           /sys/class/regulator/.../requested_microamps
 171 Date:           April 2008
 172 KernelVersion:  2.6.26
 173 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 174 Description:
 175                 Each regulator directory will contain a field called
 176                 requested_microamps. This holds the total requested load
 177                 current in microamps for this regulator from all its consumer
 178                 devices.
 179
 180
 181 What:           /sys/class/regulator/.../parent
 182 Date:           April 2008
 183 KernelVersion:  2.6.26
 184 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 185 Description:
 186                 Some regulator directories will contain a link called parent.
 187                 This points to the parent or supply regulator if one exists.
 188
 189 What:           /sys/class/regulator/.../suspend_mem_microvolts
 190 Date:           May 2008
 191 KernelVersion:  2.6.26
 192 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 193 Description:
 194                 Each regulator directory will contain a field called
 195                 suspend_mem_microvolts. This holds the regulator output
 196                 voltage setting for this domain measured in microvolts when
 197                 the system is suspended to memory.
 198
 199                 NOTE: this will return the string 'not defined' if
 200                 the power domain has no suspend to memory voltage defined by
 201                 platform code.
 202
 203 What:           /sys/class/regulator/.../suspend_disk_microvolts
 204 Date:           May 2008
 205 KernelVersion:  2.6.26
 206 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 207 Description:
 208                 Each regulator directory will contain a field called
 209                 suspend_disk_microvolts. This holds the regulator output
 210                 voltage setting for this domain measured in microvolts when
 211                 the system is suspended to disk.
 212
 213                 NOTE: this will return the string 'not defined' if
 214                 the power domain has no suspend to disk voltage defined by
 215                 platform code.
 216
 217 What:           /sys/class/regulator/.../suspend_standby_microvolts
 218 Date:           May 2008
 219 KernelVersion:  2.6.26
 220 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 221 Description:
 222                 Each regulator directory will contain a field called
 223                 suspend_standby_microvolts. This holds the regulator output
 224                 voltage setting for this domain measured in microvolts when
 225                 the system is suspended to standby.
 226
 227                 NOTE: this will return the string 'not defined' if
 228                 the power domain has no suspend to standby voltage defined by
 229                 platform code.
 230
 231 What:           /sys/class/regulator/.../suspend_mem_mode
 232 Date:           May 2008
 233 KernelVersion:  2.6.26
 234 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 235 Description:
 236                 Each regulator directory will contain a field called
 237                 suspend_mem_mode. This holds the regulator operating mode
 238                 setting for this domain when the system is suspended to
 239                 memory.
 240
 241                 NOTE: this will return the string 'not defined' if
 242                 the power domain has no suspend to memory mode defined by
 243                 platform code.
 244
 245 What:           /sys/class/regulator/.../suspend_disk_mode
 246 Date:           May 2008
 247 KernelVersion:  2.6.26
 248 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 249 Description:
 250                 Each regulator directory will contain a field called
 251                 suspend_disk_mode. This holds the regulator operating mode
 252                 setting for this domain when the system is suspended to disk.
 253
 254                 NOTE: this will return the string 'not defined' if
 255                 the power domain has no suspend to disk mode defined by
 256                 platform code.
 257
 258 What:           /sys/class/regulator/.../suspend_standby_mode
 259 Date:           May 2008
 260 KernelVersion:  2.6.26
 261 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 262 Description:
 263                 Each regulator directory will contain a field called
 264                 suspend_standby_mode. This holds the regulator operating mode
 265                 setting for this domain when the system is suspended to
 266                 standby.
 267
 268                 NOTE: this will return the string 'not defined' if
 269                 the power domain has no suspend to standby mode defined by
 270                 platform code.
 271
 272 What:           /sys/class/regulator/.../suspend_mem_state
 273 Date:           May 2008
 274 KernelVersion:  2.6.26
 275 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 276 Description:
 277                 Each regulator directory will contain a field called
 278                 suspend_mem_state. This holds the regulator operating state
 279                 when suspended to memory.
 280
 281                 This will be one of the following strings:
 282
 283                 'enabled'
 284                 'disabled'
 285                 'not defined'
 286
 287 What:           /sys/class/regulator/.../suspend_disk_state
 288 Date:           May 2008
 289 KernelVersion:  2.6.26
 290 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 291 Description:
 292                 Each regulator directory will contain a field called
 293                 suspend_disk_state. This holds the regulator operating state
 294                 when suspended to disk.
 295
 296                 This will be one of the following strings:
 297
 298                 'enabled'
 299                 'disabled'
 300                 'not defined'
 301
 302 What:           /sys/class/regulator/.../suspend_standby_state
 303 Date:           May 2008
 304 KernelVersion:  2.6.26
 305 Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
 306 Description:
 307                 Each regulator directory will contain a field called
 308                 suspend_standby_state. This holds the regulator operating
 309                 state when suspended to standby.
 310
 311                 This will be one of the following strings:
 312
 313                 'enabled'
 314                 'disabled'
 315                 'not defined'