Merge branch 'topic/hda' into for-linus
[linux-2.6] / drivers / char / synclink_gt.c
1 /*
2  * Device driver for Microgate SyncLink GT serial adapters.
3  *
4  * written by Paul Fulghum for Microgate Corporation
5  * paulkf@microgate.com
6  *
7  * Microgate and SyncLink are trademarks of Microgate Corporation
8  *
9  * This code is released under the GNU General Public License (GPL)
10  *
11  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
12  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
13  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
14  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
15  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
16  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
17  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
18  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
19  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
20  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
21  * OF THE POSSIBILITY OF SUCH DAMAGE.
22  */
23
24 /*
25  * DEBUG OUTPUT DEFINITIONS
26  *
27  * uncomment lines below to enable specific types of debug output
28  *
29  * DBGINFO   information - most verbose output
30  * DBGERR    serious errors
31  * DBGBH     bottom half service routine debugging
32  * DBGISR    interrupt service routine debugging
33  * DBGDATA   output receive and transmit data
34  * DBGTBUF   output transmit DMA buffers and registers
35  * DBGRBUF   output receive DMA buffers and registers
36  */
37
38 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
39 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
40 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
41 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
42 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
43 //#define DBGTBUF(info) dump_tbufs(info)
44 //#define DBGRBUF(info) dump_rbufs(info)
45
46
47 #include <linux/module.h>
48 #include <linux/errno.h>
49 #include <linux/signal.h>
50 #include <linux/sched.h>
51 #include <linux/timer.h>
52 #include <linux/interrupt.h>
53 #include <linux/pci.h>
54 #include <linux/tty.h>
55 #include <linux/tty_flip.h>
56 #include <linux/serial.h>
57 #include <linux/major.h>
58 #include <linux/string.h>
59 #include <linux/fcntl.h>
60 #include <linux/ptrace.h>
61 #include <linux/ioport.h>
62 #include <linux/mm.h>
63 #include <linux/seq_file.h>
64 #include <linux/slab.h>
65 #include <linux/netdevice.h>
66 #include <linux/vmalloc.h>
67 #include <linux/init.h>
68 #include <linux/delay.h>
69 #include <linux/ioctl.h>
70 #include <linux/termios.h>
71 #include <linux/bitops.h>
72 #include <linux/workqueue.h>
73 #include <linux/hdlc.h>
74 #include <linux/synclink.h>
75
76 #include <asm/system.h>
77 #include <asm/io.h>
78 #include <asm/irq.h>
79 #include <asm/dma.h>
80 #include <asm/types.h>
81 #include <asm/uaccess.h>
82
83 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
84 #define SYNCLINK_GENERIC_HDLC 1
85 #else
86 #define SYNCLINK_GENERIC_HDLC 0
87 #endif
88
89 /*
90  * module identification
91  */
92 static char *driver_name     = "SyncLink GT";
93 static char *tty_driver_name = "synclink_gt";
94 static char *tty_dev_prefix  = "ttySLG";
95 MODULE_LICENSE("GPL");
96 #define MGSL_MAGIC 0x5401
97 #define MAX_DEVICES 32
98
99 static struct pci_device_id pci_table[] = {
100         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
101         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
102         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
103         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
104         {0,}, /* terminate list */
105 };
106 MODULE_DEVICE_TABLE(pci, pci_table);
107
108 static int  init_one(struct pci_dev *dev,const struct pci_device_id *ent);
109 static void remove_one(struct pci_dev *dev);
110 static struct pci_driver pci_driver = {
111         .name           = "synclink_gt",
112         .id_table       = pci_table,
113         .probe          = init_one,
114         .remove         = __devexit_p(remove_one),
115 };
116
117 static bool pci_registered;
118
119 /*
120  * module configuration and status
121  */
122 static struct slgt_info *slgt_device_list;
123 static int slgt_device_count;
124
125 static int ttymajor;
126 static int debug_level;
127 static int maxframe[MAX_DEVICES];
128
129 module_param(ttymajor, int, 0);
130 module_param(debug_level, int, 0);
131 module_param_array(maxframe, int, NULL, 0);
132
133 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
134 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
135 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
136
137 /*
138  * tty support and callbacks
139  */
140 static struct tty_driver *serial_driver;
141
142 static int  open(struct tty_struct *tty, struct file * filp);
143 static void close(struct tty_struct *tty, struct file * filp);
144 static void hangup(struct tty_struct *tty);
145 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
146
147 static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
148 static int put_char(struct tty_struct *tty, unsigned char ch);
149 static void send_xchar(struct tty_struct *tty, char ch);
150 static void wait_until_sent(struct tty_struct *tty, int timeout);
151 static int  write_room(struct tty_struct *tty);
152 static void flush_chars(struct tty_struct *tty);
153 static void flush_buffer(struct tty_struct *tty);
154 static void tx_hold(struct tty_struct *tty);
155 static void tx_release(struct tty_struct *tty);
156
157 static int  ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
158 static int  chars_in_buffer(struct tty_struct *tty);
159 static void throttle(struct tty_struct * tty);
160 static void unthrottle(struct tty_struct * tty);
161 static int set_break(struct tty_struct *tty, int break_state);
162
163 /*
164  * generic HDLC support and callbacks
165  */
166 #if SYNCLINK_GENERIC_HDLC
167 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
168 static void hdlcdev_tx_done(struct slgt_info *info);
169 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
170 static int  hdlcdev_init(struct slgt_info *info);
171 static void hdlcdev_exit(struct slgt_info *info);
172 #endif
173
174
175 /*
176  * device specific structures, macros and functions
177  */
178
179 #define SLGT_MAX_PORTS 4
180 #define SLGT_REG_SIZE  256
181
182 /*
183  * conditional wait facility
184  */
185 struct cond_wait {
186         struct cond_wait *next;
187         wait_queue_head_t q;
188         wait_queue_t wait;
189         unsigned int data;
190 };
191 static void init_cond_wait(struct cond_wait *w, unsigned int data);
192 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
193 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
194 static void flush_cond_wait(struct cond_wait **head);
195
196 /*
197  * DMA buffer descriptor and access macros
198  */
199 struct slgt_desc
200 {
201         __le16 count;
202         __le16 status;
203         __le32 pbuf;  /* physical address of data buffer */
204         __le32 next;  /* physical address of next descriptor */
205
206         /* driver book keeping */
207         char *buf;          /* virtual  address of data buffer */
208         unsigned int pdesc; /* physical address of this descriptor */
209         dma_addr_t buf_dma_addr;
210         unsigned short buf_count;
211 };
212
213 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
214 #define set_desc_next(a,b) (a).next   = cpu_to_le32((unsigned int)(b))
215 #define set_desc_count(a,b)(a).count  = cpu_to_le16((unsigned short)(b))
216 #define set_desc_eof(a,b)  (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
217 #define desc_count(a)      (le16_to_cpu((a).count))
218 #define desc_status(a)     (le16_to_cpu((a).status))
219 #define desc_complete(a)   (le16_to_cpu((a).status) & BIT15)
220 #define desc_eof(a)        (le16_to_cpu((a).status) & BIT2)
221 #define desc_crc_error(a)  (le16_to_cpu((a).status) & BIT1)
222 #define desc_abort(a)      (le16_to_cpu((a).status) & BIT0)
223 #define desc_residue(a)    ((le16_to_cpu((a).status) & 0x38) >> 3)
224
225 struct _input_signal_events {
226         int ri_up;
227         int ri_down;
228         int dsr_up;
229         int dsr_down;
230         int dcd_up;
231         int dcd_down;
232         int cts_up;
233         int cts_down;
234 };
235
236 /*
237  * device instance data structure
238  */
239 struct slgt_info {
240         void *if_ptr;           /* General purpose pointer (used by SPPP) */
241         struct tty_port port;
242
243         struct slgt_info *next_device;  /* device list link */
244
245         int magic;
246
247         char device_name[25];
248         struct pci_dev *pdev;
249
250         int port_count;  /* count of ports on adapter */
251         int adapter_num; /* adapter instance number */
252         int port_num;    /* port instance number */
253
254         /* array of pointers to port contexts on this adapter */
255         struct slgt_info *port_array[SLGT_MAX_PORTS];
256
257         int                     line;           /* tty line instance number */
258
259         struct mgsl_icount      icount;
260
261         int                     timeout;
262         int                     x_char;         /* xon/xoff character */
263         unsigned int            read_status_mask;
264         unsigned int            ignore_status_mask;
265
266         wait_queue_head_t       status_event_wait_q;
267         wait_queue_head_t       event_wait_q;
268         struct timer_list       tx_timer;
269         struct timer_list       rx_timer;
270
271         unsigned int            gpio_present;
272         struct cond_wait        *gpio_wait_q;
273
274         spinlock_t lock;        /* spinlock for synchronizing with ISR */
275
276         struct work_struct task;
277         u32 pending_bh;
278         bool bh_requested;
279         bool bh_running;
280
281         int isr_overflow;
282         bool irq_requested;     /* true if IRQ requested */
283         bool irq_occurred;      /* for diagnostics use */
284
285         /* device configuration */
286
287         unsigned int bus_type;
288         unsigned int irq_level;
289         unsigned long irq_flags;
290
291         unsigned char __iomem * reg_addr;  /* memory mapped registers address */
292         u32 phys_reg_addr;
293         bool reg_addr_requested;
294
295         MGSL_PARAMS params;       /* communications parameters */
296         u32 idle_mode;
297         u32 max_frame_size;       /* as set by device config */
298
299         unsigned int rbuf_fill_level;
300         unsigned int if_mode;
301         unsigned int base_clock;
302
303         /* device status */
304
305         bool rx_enabled;
306         bool rx_restart;
307
308         bool tx_enabled;
309         bool tx_active;
310
311         unsigned char signals;    /* serial signal states */
312         int init_error;  /* initialization error */
313
314         unsigned char *tx_buf;
315         int tx_count;
316
317         char flag_buf[MAX_ASYNC_BUFFER_SIZE];
318         char char_buf[MAX_ASYNC_BUFFER_SIZE];
319         bool drop_rts_on_tx_done;
320         struct  _input_signal_events    input_signal_events;
321
322         int dcd_chkcount;       /* check counts to prevent */
323         int cts_chkcount;       /* too many IRQs if a signal */
324         int dsr_chkcount;       /* is floating */
325         int ri_chkcount;
326
327         char *bufs;             /* virtual address of DMA buffer lists */
328         dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
329
330         unsigned int rbuf_count;
331         struct slgt_desc *rbufs;
332         unsigned int rbuf_current;
333         unsigned int rbuf_index;
334
335         unsigned int tbuf_count;
336         struct slgt_desc *tbufs;
337         unsigned int tbuf_current;
338         unsigned int tbuf_start;
339
340         unsigned char *tmp_rbuf;
341         unsigned int tmp_rbuf_count;
342
343         /* SPPP/Cisco HDLC device parts */
344
345         int netcount;
346         spinlock_t netlock;
347 #if SYNCLINK_GENERIC_HDLC
348         struct net_device *netdev;
349 #endif
350
351 };
352
353 static MGSL_PARAMS default_params = {
354         .mode            = MGSL_MODE_HDLC,
355         .loopback        = 0,
356         .flags           = HDLC_FLAG_UNDERRUN_ABORT15,
357         .encoding        = HDLC_ENCODING_NRZI_SPACE,
358         .clock_speed     = 0,
359         .addr_filter     = 0xff,
360         .crc_type        = HDLC_CRC_16_CCITT,
361         .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
362         .preamble        = HDLC_PREAMBLE_PATTERN_NONE,
363         .data_rate       = 9600,
364         .data_bits       = 8,
365         .stop_bits       = 1,
366         .parity          = ASYNC_PARITY_NONE
367 };
368
369
370 #define BH_RECEIVE  1
371 #define BH_TRANSMIT 2
372 #define BH_STATUS   4
373 #define IO_PIN_SHUTDOWN_LIMIT 100
374
375 #define DMABUFSIZE 256
376 #define DESC_LIST_SIZE 4096
377
378 #define MASK_PARITY  BIT1
379 #define MASK_FRAMING BIT0
380 #define MASK_BREAK   BIT14
381 #define MASK_OVERRUN BIT4
382
383 #define GSR   0x00 /* global status */
384 #define JCR   0x04 /* JTAG control */
385 #define IODR  0x08 /* GPIO direction */
386 #define IOER  0x0c /* GPIO interrupt enable */
387 #define IOVR  0x10 /* GPIO value */
388 #define IOSR  0x14 /* GPIO interrupt status */
389 #define TDR   0x80 /* tx data */
390 #define RDR   0x80 /* rx data */
391 #define TCR   0x82 /* tx control */
392 #define TIR   0x84 /* tx idle */
393 #define TPR   0x85 /* tx preamble */
394 #define RCR   0x86 /* rx control */
395 #define VCR   0x88 /* V.24 control */
396 #define CCR   0x89 /* clock control */
397 #define BDR   0x8a /* baud divisor */
398 #define SCR   0x8c /* serial control */
399 #define SSR   0x8e /* serial status */
400 #define RDCSR 0x90 /* rx DMA control/status */
401 #define TDCSR 0x94 /* tx DMA control/status */
402 #define RDDAR 0x98 /* rx DMA descriptor address */
403 #define TDDAR 0x9c /* tx DMA descriptor address */
404
405 #define RXIDLE      BIT14
406 #define RXBREAK     BIT14
407 #define IRQ_TXDATA  BIT13
408 #define IRQ_TXIDLE  BIT12
409 #define IRQ_TXUNDER BIT11 /* HDLC */
410 #define IRQ_RXDATA  BIT10
411 #define IRQ_RXIDLE  BIT9  /* HDLC */
412 #define IRQ_RXBREAK BIT9  /* async */
413 #define IRQ_RXOVER  BIT8
414 #define IRQ_DSR     BIT7
415 #define IRQ_CTS     BIT6
416 #define IRQ_DCD     BIT5
417 #define IRQ_RI      BIT4
418 #define IRQ_ALL     0x3ff0
419 #define IRQ_MASTER  BIT0
420
421 #define slgt_irq_on(info, mask) \
422         wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
423 #define slgt_irq_off(info, mask) \
424         wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
425
426 static __u8  rd_reg8(struct slgt_info *info, unsigned int addr);
427 static void  wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
428 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
429 static void  wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
430 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
431 static void  wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
432
433 static void  msc_set_vcr(struct slgt_info *info);
434
435 static int  startup(struct slgt_info *info);
436 static int  block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
437 static void shutdown(struct slgt_info *info);
438 static void program_hw(struct slgt_info *info);
439 static void change_params(struct slgt_info *info);
440
441 static int  register_test(struct slgt_info *info);
442 static int  irq_test(struct slgt_info *info);
443 static int  loopback_test(struct slgt_info *info);
444 static int  adapter_test(struct slgt_info *info);
445
446 static void reset_adapter(struct slgt_info *info);
447 static void reset_port(struct slgt_info *info);
448 static void async_mode(struct slgt_info *info);
449 static void sync_mode(struct slgt_info *info);
450
451 static void rx_stop(struct slgt_info *info);
452 static void rx_start(struct slgt_info *info);
453 static void reset_rbufs(struct slgt_info *info);
454 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
455 static void rdma_reset(struct slgt_info *info);
456 static bool rx_get_frame(struct slgt_info *info);
457 static bool rx_get_buf(struct slgt_info *info);
458
459 static void tx_start(struct slgt_info *info);
460 static void tx_stop(struct slgt_info *info);
461 static void tx_set_idle(struct slgt_info *info);
462 static unsigned int free_tbuf_count(struct slgt_info *info);
463 static unsigned int tbuf_bytes(struct slgt_info *info);
464 static void reset_tbufs(struct slgt_info *info);
465 static void tdma_reset(struct slgt_info *info);
466 static void tdma_start(struct slgt_info *info);
467 static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
468
469 static void get_signals(struct slgt_info *info);
470 static void set_signals(struct slgt_info *info);
471 static void enable_loopback(struct slgt_info *info);
472 static void set_rate(struct slgt_info *info, u32 data_rate);
473
474 static int  bh_action(struct slgt_info *info);
475 static void bh_handler(struct work_struct *work);
476 static void bh_transmit(struct slgt_info *info);
477 static void isr_serial(struct slgt_info *info);
478 static void isr_rdma(struct slgt_info *info);
479 static void isr_txeom(struct slgt_info *info, unsigned short status);
480 static void isr_tdma(struct slgt_info *info);
481
482 static int  alloc_dma_bufs(struct slgt_info *info);
483 static void free_dma_bufs(struct slgt_info *info);
484 static int  alloc_desc(struct slgt_info *info);
485 static void free_desc(struct slgt_info *info);
486 static int  alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
487 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
488
489 static int  alloc_tmp_rbuf(struct slgt_info *info);
490 static void free_tmp_rbuf(struct slgt_info *info);
491
492 static void tx_timeout(unsigned long context);
493 static void rx_timeout(unsigned long context);
494
495 /*
496  * ioctl handlers
497  */
498 static int  get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
499 static int  get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
500 static int  set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
501 static int  get_txidle(struct slgt_info *info, int __user *idle_mode);
502 static int  set_txidle(struct slgt_info *info, int idle_mode);
503 static int  tx_enable(struct slgt_info *info, int enable);
504 static int  tx_abort(struct slgt_info *info);
505 static int  rx_enable(struct slgt_info *info, int enable);
506 static int  modem_input_wait(struct slgt_info *info,int arg);
507 static int  wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
508 static int  tiocmget(struct tty_struct *tty, struct file *file);
509 static int  tiocmset(struct tty_struct *tty, struct file *file,
510                      unsigned int set, unsigned int clear);
511 static int set_break(struct tty_struct *tty, int break_state);
512 static int  get_interface(struct slgt_info *info, int __user *if_mode);
513 static int  set_interface(struct slgt_info *info, int if_mode);
514 static int  set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
515 static int  get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
516 static int  wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
517
518 /*
519  * driver functions
520  */
521 static void add_device(struct slgt_info *info);
522 static void device_init(int adapter_num, struct pci_dev *pdev);
523 static int  claim_resources(struct slgt_info *info);
524 static void release_resources(struct slgt_info *info);
525
526 /*
527  * DEBUG OUTPUT CODE
528  */
529 #ifndef DBGINFO
530 #define DBGINFO(fmt)
531 #endif
532 #ifndef DBGERR
533 #define DBGERR(fmt)
534 #endif
535 #ifndef DBGBH
536 #define DBGBH(fmt)
537 #endif
538 #ifndef DBGISR
539 #define DBGISR(fmt)
540 #endif
541
542 #ifdef DBGDATA
543 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
544 {
545         int i;
546         int linecount;
547         printk("%s %s data:\n",info->device_name, label);
548         while(count) {
549                 linecount = (count > 16) ? 16 : count;
550                 for(i=0; i < linecount; i++)
551                         printk("%02X ",(unsigned char)data[i]);
552                 for(;i<17;i++)
553                         printk("   ");
554                 for(i=0;i<linecount;i++) {
555                         if (data[i]>=040 && data[i]<=0176)
556                                 printk("%c",data[i]);
557                         else
558                                 printk(".");
559                 }
560                 printk("\n");
561                 data  += linecount;
562                 count -= linecount;
563         }
564 }
565 #else
566 #define DBGDATA(info, buf, size, label)
567 #endif
568
569 #ifdef DBGTBUF
570 static void dump_tbufs(struct slgt_info *info)
571 {
572         int i;
573         printk("tbuf_current=%d\n", info->tbuf_current);
574         for (i=0 ; i < info->tbuf_count ; i++) {
575                 printk("%d: count=%04X status=%04X\n",
576                         i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
577         }
578 }
579 #else
580 #define DBGTBUF(info)
581 #endif
582
583 #ifdef DBGRBUF
584 static void dump_rbufs(struct slgt_info *info)
585 {
586         int i;
587         printk("rbuf_current=%d\n", info->rbuf_current);
588         for (i=0 ; i < info->rbuf_count ; i++) {
589                 printk("%d: count=%04X status=%04X\n",
590                         i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
591         }
592 }
593 #else
594 #define DBGRBUF(info)
595 #endif
596
597 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
598 {
599 #ifdef SANITY_CHECK
600         if (!info) {
601                 printk("null struct slgt_info for (%s) in %s\n", devname, name);
602                 return 1;
603         }
604         if (info->magic != MGSL_MAGIC) {
605                 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
606                 return 1;
607         }
608 #else
609         if (!info)
610                 return 1;
611 #endif
612         return 0;
613 }
614
615 /**
616  * line discipline callback wrappers
617  *
618  * The wrappers maintain line discipline references
619  * while calling into the line discipline.
620  *
621  * ldisc_receive_buf  - pass receive data to line discipline
622  */
623 static void ldisc_receive_buf(struct tty_struct *tty,
624                               const __u8 *data, char *flags, int count)
625 {
626         struct tty_ldisc *ld;
627         if (!tty)
628                 return;
629         ld = tty_ldisc_ref(tty);
630         if (ld) {
631                 if (ld->ops->receive_buf)
632                         ld->ops->receive_buf(tty, data, flags, count);
633                 tty_ldisc_deref(ld);
634         }
635 }
636
637 /* tty callbacks */
638
639 static int open(struct tty_struct *tty, struct file *filp)
640 {
641         struct slgt_info *info;
642         int retval, line;
643         unsigned long flags;
644
645         line = tty->index;
646         if ((line < 0) || (line >= slgt_device_count)) {
647                 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
648                 return -ENODEV;
649         }
650
651         info = slgt_device_list;
652         while(info && info->line != line)
653                 info = info->next_device;
654         if (sanity_check(info, tty->name, "open"))
655                 return -ENODEV;
656         if (info->init_error) {
657                 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
658                 return -ENODEV;
659         }
660
661         tty->driver_data = info;
662         info->port.tty = tty;
663
664         DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
665
666         /* If port is closing, signal caller to try again */
667         if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
668                 if (info->port.flags & ASYNC_CLOSING)
669                         interruptible_sleep_on(&info->port.close_wait);
670                 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
671                         -EAGAIN : -ERESTARTSYS);
672                 goto cleanup;
673         }
674
675         info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
676
677         spin_lock_irqsave(&info->netlock, flags);
678         if (info->netcount) {
679                 retval = -EBUSY;
680                 spin_unlock_irqrestore(&info->netlock, flags);
681                 goto cleanup;
682         }
683         info->port.count++;
684         spin_unlock_irqrestore(&info->netlock, flags);
685
686         if (info->port.count == 1) {
687                 /* 1st open on this device, init hardware */
688                 retval = startup(info);
689                 if (retval < 0)
690                         goto cleanup;
691         }
692
693         retval = block_til_ready(tty, filp, info);
694         if (retval) {
695                 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
696                 goto cleanup;
697         }
698
699         retval = 0;
700
701 cleanup:
702         if (retval) {
703                 if (tty->count == 1)
704                         info->port.tty = NULL; /* tty layer will release tty struct */
705                 if(info->port.count)
706                         info->port.count--;
707         }
708
709         DBGINFO(("%s open rc=%d\n", info->device_name, retval));
710         return retval;
711 }
712
713 static void close(struct tty_struct *tty, struct file *filp)
714 {
715         struct slgt_info *info = tty->driver_data;
716
717         if (sanity_check(info, tty->name, "close"))
718                 return;
719         DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
720
721         if (tty_port_close_start(&info->port, tty, filp) == 0)
722                 goto cleanup;
723
724         if (info->port.flags & ASYNC_INITIALIZED)
725                 wait_until_sent(tty, info->timeout);
726         flush_buffer(tty);
727         tty_ldisc_flush(tty);
728
729         shutdown(info);
730
731         tty_port_close_end(&info->port, tty);
732         info->port.tty = NULL;
733 cleanup:
734         DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
735 }
736
737 static void hangup(struct tty_struct *tty)
738 {
739         struct slgt_info *info = tty->driver_data;
740
741         if (sanity_check(info, tty->name, "hangup"))
742                 return;
743         DBGINFO(("%s hangup\n", info->device_name));
744
745         flush_buffer(tty);
746         shutdown(info);
747
748         info->port.count = 0;
749         info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
750         info->port.tty = NULL;
751
752         wake_up_interruptible(&info->port.open_wait);
753 }
754
755 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
756 {
757         struct slgt_info *info = tty->driver_data;
758         unsigned long flags;
759
760         DBGINFO(("%s set_termios\n", tty->driver->name));
761
762         change_params(info);
763
764         /* Handle transition to B0 status */
765         if (old_termios->c_cflag & CBAUD &&
766             !(tty->termios->c_cflag & CBAUD)) {
767                 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
768                 spin_lock_irqsave(&info->lock,flags);
769                 set_signals(info);
770                 spin_unlock_irqrestore(&info->lock,flags);
771         }
772
773         /* Handle transition away from B0 status */
774         if (!(old_termios->c_cflag & CBAUD) &&
775             tty->termios->c_cflag & CBAUD) {
776                 info->signals |= SerialSignal_DTR;
777                 if (!(tty->termios->c_cflag & CRTSCTS) ||
778                     !test_bit(TTY_THROTTLED, &tty->flags)) {
779                         info->signals |= SerialSignal_RTS;
780                 }
781                 spin_lock_irqsave(&info->lock,flags);
782                 set_signals(info);
783                 spin_unlock_irqrestore(&info->lock,flags);
784         }
785
786         /* Handle turning off CRTSCTS */
787         if (old_termios->c_cflag & CRTSCTS &&
788             !(tty->termios->c_cflag & CRTSCTS)) {
789                 tty->hw_stopped = 0;
790                 tx_release(tty);
791         }
792 }
793
794 static int write(struct tty_struct *tty,
795                  const unsigned char *buf, int count)
796 {
797         int ret = 0;
798         struct slgt_info *info = tty->driver_data;
799         unsigned long flags;
800         unsigned int bufs_needed;
801
802         if (sanity_check(info, tty->name, "write"))
803                 goto cleanup;
804         DBGINFO(("%s write count=%d\n", info->device_name, count));
805
806         if (!info->tx_buf)
807                 goto cleanup;
808
809         if (count > info->max_frame_size) {
810                 ret = -EIO;
811                 goto cleanup;
812         }
813
814         if (!count)
815                 goto cleanup;
816
817         if (!info->tx_active && info->tx_count) {
818                 /* send accumulated data from send_char() */
819                 tx_load(info, info->tx_buf, info->tx_count);
820                 goto start;
821         }
822         bufs_needed = (count/DMABUFSIZE);
823         if (count % DMABUFSIZE)
824                 ++bufs_needed;
825         if (bufs_needed > free_tbuf_count(info))
826                 goto cleanup;
827
828         ret = info->tx_count = count;
829         tx_load(info, buf, count);
830         goto start;
831
832 start:
833         if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
834                 spin_lock_irqsave(&info->lock,flags);
835                 if (!info->tx_active)
836                         tx_start(info);
837                 else
838                         tdma_start(info);
839                 spin_unlock_irqrestore(&info->lock,flags);
840         }
841
842 cleanup:
843         DBGINFO(("%s write rc=%d\n", info->device_name, ret));
844         return ret;
845 }
846
847 static int put_char(struct tty_struct *tty, unsigned char ch)
848 {
849         struct slgt_info *info = tty->driver_data;
850         unsigned long flags;
851         int ret = 0;
852
853         if (sanity_check(info, tty->name, "put_char"))
854                 return 0;
855         DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
856         if (!info->tx_buf)
857                 return 0;
858         spin_lock_irqsave(&info->lock,flags);
859         if (!info->tx_active && (info->tx_count < info->max_frame_size)) {
860                 info->tx_buf[info->tx_count++] = ch;
861                 ret = 1;
862         }
863         spin_unlock_irqrestore(&info->lock,flags);
864         return ret;
865 }
866
867 static void send_xchar(struct tty_struct *tty, char ch)
868 {
869         struct slgt_info *info = tty->driver_data;
870         unsigned long flags;
871
872         if (sanity_check(info, tty->name, "send_xchar"))
873                 return;
874         DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
875         info->x_char = ch;
876         if (ch) {
877                 spin_lock_irqsave(&info->lock,flags);
878                 if (!info->tx_enabled)
879                         tx_start(info);
880                 spin_unlock_irqrestore(&info->lock,flags);
881         }
882 }
883
884 static void wait_until_sent(struct tty_struct *tty, int timeout)
885 {
886         struct slgt_info *info = tty->driver_data;
887         unsigned long orig_jiffies, char_time;
888
889         if (!info )
890                 return;
891         if (sanity_check(info, tty->name, "wait_until_sent"))
892                 return;
893         DBGINFO(("%s wait_until_sent entry\n", info->device_name));
894         if (!(info->port.flags & ASYNC_INITIALIZED))
895                 goto exit;
896
897         orig_jiffies = jiffies;
898
899         /* Set check interval to 1/5 of estimated time to
900          * send a character, and make it at least 1. The check
901          * interval should also be less than the timeout.
902          * Note: use tight timings here to satisfy the NIST-PCTS.
903          */
904
905         lock_kernel();
906
907         if (info->params.data_rate) {
908                 char_time = info->timeout/(32 * 5);
909                 if (!char_time)
910                         char_time++;
911         } else
912                 char_time = 1;
913
914         if (timeout)
915                 char_time = min_t(unsigned long, char_time, timeout);
916
917         while (info->tx_active) {
918                 msleep_interruptible(jiffies_to_msecs(char_time));
919                 if (signal_pending(current))
920                         break;
921                 if (timeout && time_after(jiffies, orig_jiffies + timeout))
922                         break;
923         }
924         unlock_kernel();
925
926 exit:
927         DBGINFO(("%s wait_until_sent exit\n", info->device_name));
928 }
929
930 static int write_room(struct tty_struct *tty)
931 {
932         struct slgt_info *info = tty->driver_data;
933         int ret;
934
935         if (sanity_check(info, tty->name, "write_room"))
936                 return 0;
937         ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
938         DBGINFO(("%s write_room=%d\n", info->device_name, ret));
939         return ret;
940 }
941
942 static void flush_chars(struct tty_struct *tty)
943 {
944         struct slgt_info *info = tty->driver_data;
945         unsigned long flags;
946
947         if (sanity_check(info, tty->name, "flush_chars"))
948                 return;
949         DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
950
951         if (info->tx_count <= 0 || tty->stopped ||
952             tty->hw_stopped || !info->tx_buf)
953                 return;
954
955         DBGINFO(("%s flush_chars start transmit\n", info->device_name));
956
957         spin_lock_irqsave(&info->lock,flags);
958         if (!info->tx_active && info->tx_count) {
959                 tx_load(info, info->tx_buf,info->tx_count);
960                 tx_start(info);
961         }
962         spin_unlock_irqrestore(&info->lock,flags);
963 }
964
965 static void flush_buffer(struct tty_struct *tty)
966 {
967         struct slgt_info *info = tty->driver_data;
968         unsigned long flags;
969
970         if (sanity_check(info, tty->name, "flush_buffer"))
971                 return;
972         DBGINFO(("%s flush_buffer\n", info->device_name));
973
974         spin_lock_irqsave(&info->lock,flags);
975         if (!info->tx_active)
976                 info->tx_count = 0;
977         spin_unlock_irqrestore(&info->lock,flags);
978
979         tty_wakeup(tty);
980 }
981
982 /*
983  * throttle (stop) transmitter
984  */
985 static void tx_hold(struct tty_struct *tty)
986 {
987         struct slgt_info *info = tty->driver_data;
988         unsigned long flags;
989
990         if (sanity_check(info, tty->name, "tx_hold"))
991                 return;
992         DBGINFO(("%s tx_hold\n", info->device_name));
993         spin_lock_irqsave(&info->lock,flags);
994         if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
995                 tx_stop(info);
996         spin_unlock_irqrestore(&info->lock,flags);
997 }
998
999 /*
1000  * release (start) transmitter
1001  */
1002 static void tx_release(struct tty_struct *tty)
1003 {
1004         struct slgt_info *info = tty->driver_data;
1005         unsigned long flags;
1006
1007         if (sanity_check(info, tty->name, "tx_release"))
1008                 return;
1009         DBGINFO(("%s tx_release\n", info->device_name));
1010         spin_lock_irqsave(&info->lock,flags);
1011         if (!info->tx_active && info->tx_count) {
1012                 tx_load(info, info->tx_buf, info->tx_count);
1013                 tx_start(info);
1014         }
1015         spin_unlock_irqrestore(&info->lock,flags);
1016 }
1017
1018 /*
1019  * Service an IOCTL request
1020  *
1021  * Arguments
1022  *
1023  *      tty     pointer to tty instance data
1024  *      file    pointer to associated file object for device
1025  *      cmd     IOCTL command code
1026  *      arg     command argument/context
1027  *
1028  * Return 0 if success, otherwise error code
1029  */
1030 static int ioctl(struct tty_struct *tty, struct file *file,
1031                  unsigned int cmd, unsigned long arg)
1032 {
1033         struct slgt_info *info = tty->driver_data;
1034         struct mgsl_icount cnow;        /* kernel counter temps */
1035         struct serial_icounter_struct __user *p_cuser;  /* user space */
1036         unsigned long flags;
1037         void __user *argp = (void __user *)arg;
1038         int ret;
1039
1040         if (sanity_check(info, tty->name, "ioctl"))
1041                 return -ENODEV;
1042         DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1043
1044         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1045             (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1046                 if (tty->flags & (1 << TTY_IO_ERROR))
1047                     return -EIO;
1048         }
1049
1050         lock_kernel();
1051
1052         switch (cmd) {
1053         case MGSL_IOCGPARAMS:
1054                 ret = get_params(info, argp);
1055                 break;
1056         case MGSL_IOCSPARAMS:
1057                 ret = set_params(info, argp);
1058                 break;
1059         case MGSL_IOCGTXIDLE:
1060                 ret = get_txidle(info, argp);
1061                 break;
1062         case MGSL_IOCSTXIDLE:
1063                 ret = set_txidle(info, (int)arg);
1064                 break;
1065         case MGSL_IOCTXENABLE:
1066                 ret = tx_enable(info, (int)arg);
1067                 break;
1068         case MGSL_IOCRXENABLE:
1069                 ret = rx_enable(info, (int)arg);
1070                 break;
1071         case MGSL_IOCTXABORT:
1072                 ret = tx_abort(info);
1073                 break;
1074         case MGSL_IOCGSTATS:
1075                 ret = get_stats(info, argp);
1076                 break;
1077         case MGSL_IOCWAITEVENT:
1078                 ret = wait_mgsl_event(info, argp);
1079                 break;
1080         case TIOCMIWAIT:
1081                 ret = modem_input_wait(info,(int)arg);
1082                 break;
1083         case MGSL_IOCGIF:
1084                 ret = get_interface(info, argp);
1085                 break;
1086         case MGSL_IOCSIF:
1087                 ret = set_interface(info,(int)arg);
1088                 break;
1089         case MGSL_IOCSGPIO:
1090                 ret = set_gpio(info, argp);
1091                 break;
1092         case MGSL_IOCGGPIO:
1093                 ret = get_gpio(info, argp);
1094                 break;
1095         case MGSL_IOCWAITGPIO:
1096                 ret = wait_gpio(info, argp);
1097                 break;
1098         case TIOCGICOUNT:
1099                 spin_lock_irqsave(&info->lock,flags);
1100                 cnow = info->icount;
1101                 spin_unlock_irqrestore(&info->lock,flags);
1102                 p_cuser = argp;
1103                 if (put_user(cnow.cts, &p_cuser->cts) ||
1104                     put_user(cnow.dsr, &p_cuser->dsr) ||
1105                     put_user(cnow.rng, &p_cuser->rng) ||
1106                     put_user(cnow.dcd, &p_cuser->dcd) ||
1107                     put_user(cnow.rx, &p_cuser->rx) ||
1108                     put_user(cnow.tx, &p_cuser->tx) ||
1109                     put_user(cnow.frame, &p_cuser->frame) ||
1110                     put_user(cnow.overrun, &p_cuser->overrun) ||
1111                     put_user(cnow.parity, &p_cuser->parity) ||
1112                     put_user(cnow.brk, &p_cuser->brk) ||
1113                     put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
1114                         ret = -EFAULT;
1115                 ret = 0;
1116                 break;
1117         default:
1118                 ret = -ENOIOCTLCMD;
1119         }
1120         unlock_kernel();
1121         return ret;
1122 }
1123
1124 /*
1125  * support for 32 bit ioctl calls on 64 bit systems
1126  */
1127 #ifdef CONFIG_COMPAT
1128 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
1129 {
1130         struct MGSL_PARAMS32 tmp_params;
1131
1132         DBGINFO(("%s get_params32\n", info->device_name));
1133         tmp_params.mode            = (compat_ulong_t)info->params.mode;
1134         tmp_params.loopback        = info->params.loopback;
1135         tmp_params.flags           = info->params.flags;
1136         tmp_params.encoding        = info->params.encoding;
1137         tmp_params.clock_speed     = (compat_ulong_t)info->params.clock_speed;
1138         tmp_params.addr_filter     = info->params.addr_filter;
1139         tmp_params.crc_type        = info->params.crc_type;
1140         tmp_params.preamble_length = info->params.preamble_length;
1141         tmp_params.preamble        = info->params.preamble;
1142         tmp_params.data_rate       = (compat_ulong_t)info->params.data_rate;
1143         tmp_params.data_bits       = info->params.data_bits;
1144         tmp_params.stop_bits       = info->params.stop_bits;
1145         tmp_params.parity          = info->params.parity;
1146         if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
1147                 return -EFAULT;
1148         return 0;
1149 }
1150
1151 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
1152 {
1153         struct MGSL_PARAMS32 tmp_params;
1154
1155         DBGINFO(("%s set_params32\n", info->device_name));
1156         if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
1157                 return -EFAULT;
1158
1159         spin_lock(&info->lock);
1160         if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) {
1161                 info->base_clock = tmp_params.clock_speed;
1162         } else {
1163                 info->params.mode            = tmp_params.mode;
1164                 info->params.loopback        = tmp_params.loopback;
1165                 info->params.flags           = tmp_params.flags;
1166                 info->params.encoding        = tmp_params.encoding;
1167                 info->params.clock_speed     = tmp_params.clock_speed;
1168                 info->params.addr_filter     = tmp_params.addr_filter;
1169                 info->params.crc_type        = tmp_params.crc_type;
1170                 info->params.preamble_length = tmp_params.preamble_length;
1171                 info->params.preamble        = tmp_params.preamble;
1172                 info->params.data_rate       = tmp_params.data_rate;
1173                 info->params.data_bits       = tmp_params.data_bits;
1174                 info->params.stop_bits       = tmp_params.stop_bits;
1175                 info->params.parity          = tmp_params.parity;
1176         }
1177         spin_unlock(&info->lock);
1178
1179         program_hw(info);
1180
1181         return 0;
1182 }
1183
1184 static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
1185                          unsigned int cmd, unsigned long arg)
1186 {
1187         struct slgt_info *info = tty->driver_data;
1188         int rc = -ENOIOCTLCMD;
1189
1190         if (sanity_check(info, tty->name, "compat_ioctl"))
1191                 return -ENODEV;
1192         DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
1193
1194         switch (cmd) {
1195
1196         case MGSL_IOCSPARAMS32:
1197                 rc = set_params32(info, compat_ptr(arg));
1198                 break;
1199
1200         case MGSL_IOCGPARAMS32:
1201                 rc = get_params32(info, compat_ptr(arg));
1202                 break;
1203
1204         case MGSL_IOCGPARAMS:
1205         case MGSL_IOCSPARAMS:
1206         case MGSL_IOCGTXIDLE:
1207         case MGSL_IOCGSTATS:
1208         case MGSL_IOCWAITEVENT:
1209         case MGSL_IOCGIF:
1210         case MGSL_IOCSGPIO:
1211         case MGSL_IOCGGPIO:
1212         case MGSL_IOCWAITGPIO:
1213         case TIOCGICOUNT:
1214                 rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
1215                 break;
1216
1217         case MGSL_IOCSTXIDLE:
1218         case MGSL_IOCTXENABLE:
1219         case MGSL_IOCRXENABLE:
1220         case MGSL_IOCTXABORT:
1221         case TIOCMIWAIT:
1222         case MGSL_IOCSIF:
1223                 rc = ioctl(tty, file, cmd, arg);
1224                 break;
1225         }
1226
1227         DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
1228         return rc;
1229 }
1230 #else
1231 #define slgt_compat_ioctl NULL
1232 #endif /* ifdef CONFIG_COMPAT */
1233
1234 /*
1235  * proc fs support
1236  */
1237 static inline void line_info(struct seq_file *m, struct slgt_info *info)
1238 {
1239         char stat_buf[30];
1240         unsigned long flags;
1241
1242         seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1243                       info->device_name, info->phys_reg_addr,
1244                       info->irq_level, info->max_frame_size);
1245
1246         /* output current serial signal states */
1247         spin_lock_irqsave(&info->lock,flags);
1248         get_signals(info);
1249         spin_unlock_irqrestore(&info->lock,flags);
1250
1251         stat_buf[0] = 0;
1252         stat_buf[1] = 0;
1253         if (info->signals & SerialSignal_RTS)
1254                 strcat(stat_buf, "|RTS");
1255         if (info->signals & SerialSignal_CTS)
1256                 strcat(stat_buf, "|CTS");
1257         if (info->signals & SerialSignal_DTR)
1258                 strcat(stat_buf, "|DTR");
1259         if (info->signals & SerialSignal_DSR)
1260                 strcat(stat_buf, "|DSR");
1261         if (info->signals & SerialSignal_DCD)
1262                 strcat(stat_buf, "|CD");
1263         if (info->signals & SerialSignal_RI)
1264                 strcat(stat_buf, "|RI");
1265
1266         if (info->params.mode != MGSL_MODE_ASYNC) {
1267                 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1268                                info->icount.txok, info->icount.rxok);
1269                 if (info->icount.txunder)
1270                         seq_printf(m, " txunder:%d", info->icount.txunder);
1271                 if (info->icount.txabort)
1272                         seq_printf(m, " txabort:%d", info->icount.txabort);
1273                 if (info->icount.rxshort)
1274                         seq_printf(m, " rxshort:%d", info->icount.rxshort);
1275                 if (info->icount.rxlong)
1276                         seq_printf(m, " rxlong:%d", info->icount.rxlong);
1277                 if (info->icount.rxover)
1278                         seq_printf(m, " rxover:%d", info->icount.rxover);
1279                 if (info->icount.rxcrc)
1280                         seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
1281         } else {
1282                 seq_printf(m, "\tASYNC tx:%d rx:%d",
1283                                info->icount.tx, info->icount.rx);
1284                 if (info->icount.frame)
1285                         seq_printf(m, " fe:%d", info->icount.frame);
1286                 if (info->icount.parity)
1287                         seq_printf(m, " pe:%d", info->icount.parity);
1288                 if (info->icount.brk)
1289                         seq_printf(m, " brk:%d", info->icount.brk);
1290                 if (info->icount.overrun)
1291                         seq_printf(m, " oe:%d", info->icount.overrun);
1292         }
1293
1294         /* Append serial signal status to end */
1295         seq_printf(m, " %s\n", stat_buf+1);
1296
1297         seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1298                        info->tx_active,info->bh_requested,info->bh_running,
1299                        info->pending_bh);
1300 }
1301
1302 /* Called to print information about devices
1303  */
1304 static int synclink_gt_proc_show(struct seq_file *m, void *v)
1305 {
1306         struct slgt_info *info;
1307
1308         seq_puts(m, "synclink_gt driver\n");
1309
1310         info = slgt_device_list;
1311         while( info ) {
1312                 line_info(m, info);
1313                 info = info->next_device;
1314         }
1315         return 0;
1316 }
1317
1318 static int synclink_gt_proc_open(struct inode *inode, struct file *file)
1319 {
1320         return single_open(file, synclink_gt_proc_show, NULL);
1321 }
1322
1323 static const struct file_operations synclink_gt_proc_fops = {
1324         .owner          = THIS_MODULE,
1325         .open           = synclink_gt_proc_open,
1326         .read           = seq_read,
1327         .llseek         = seq_lseek,
1328         .release        = single_release,
1329 };
1330
1331 /*
1332  * return count of bytes in transmit buffer
1333  */
1334 static int chars_in_buffer(struct tty_struct *tty)
1335 {
1336         struct slgt_info *info = tty->driver_data;
1337         int count;
1338         if (sanity_check(info, tty->name, "chars_in_buffer"))
1339                 return 0;
1340         count = tbuf_bytes(info);
1341         DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count));
1342         return count;
1343 }
1344
1345 /*
1346  * signal remote device to throttle send data (our receive data)
1347  */
1348 static void throttle(struct tty_struct * tty)
1349 {
1350         struct slgt_info *info = tty->driver_data;
1351         unsigned long flags;
1352
1353         if (sanity_check(info, tty->name, "throttle"))
1354                 return;
1355         DBGINFO(("%s throttle\n", info->device_name));
1356         if (I_IXOFF(tty))
1357                 send_xchar(tty, STOP_CHAR(tty));
1358         if (tty->termios->c_cflag & CRTSCTS) {
1359                 spin_lock_irqsave(&info->lock,flags);
1360                 info->signals &= ~SerialSignal_RTS;
1361                 set_signals(info);
1362                 spin_unlock_irqrestore(&info->lock,flags);
1363         }
1364 }
1365
1366 /*
1367  * signal remote device to stop throttling send data (our receive data)
1368  */
1369 static void unthrottle(struct tty_struct * tty)
1370 {
1371         struct slgt_info *info = tty->driver_data;
1372         unsigned long flags;
1373
1374         if (sanity_check(info, tty->name, "unthrottle"))
1375                 return;
1376         DBGINFO(("%s unthrottle\n", info->device_name));
1377         if (I_IXOFF(tty)) {
1378                 if (info->x_char)
1379                         info->x_char = 0;
1380                 else
1381                         send_xchar(tty, START_CHAR(tty));
1382         }
1383         if (tty->termios->c_cflag & CRTSCTS) {
1384                 spin_lock_irqsave(&info->lock,flags);
1385                 info->signals |= SerialSignal_RTS;
1386                 set_signals(info);
1387                 spin_unlock_irqrestore(&info->lock,flags);
1388         }
1389 }
1390
1391 /*
1392  * set or clear transmit break condition
1393  * break_state  -1=set break condition, 0=clear
1394  */
1395 static int set_break(struct tty_struct *tty, int break_state)
1396 {
1397         struct slgt_info *info = tty->driver_data;
1398         unsigned short value;
1399         unsigned long flags;
1400
1401         if (sanity_check(info, tty->name, "set_break"))
1402                 return -EINVAL;
1403         DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1404
1405         spin_lock_irqsave(&info->lock,flags);
1406         value = rd_reg16(info, TCR);
1407         if (break_state == -1)
1408                 value |= BIT6;
1409         else
1410                 value &= ~BIT6;
1411         wr_reg16(info, TCR, value);
1412         spin_unlock_irqrestore(&info->lock,flags);
1413         return 0;
1414 }
1415
1416 #if SYNCLINK_GENERIC_HDLC
1417
1418 /**
1419  * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1420  * set encoding and frame check sequence (FCS) options
1421  *
1422  * dev       pointer to network device structure
1423  * encoding  serial encoding setting
1424  * parity    FCS setting
1425  *
1426  * returns 0 if success, otherwise error code
1427  */
1428 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1429                           unsigned short parity)
1430 {
1431         struct slgt_info *info = dev_to_port(dev);
1432         unsigned char  new_encoding;
1433         unsigned short new_crctype;
1434
1435         /* return error if TTY interface open */
1436         if (info->port.count)
1437                 return -EBUSY;
1438
1439         DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1440
1441         switch (encoding)
1442         {
1443         case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
1444         case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1445         case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1446         case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1447         case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1448         default: return -EINVAL;
1449         }
1450
1451         switch (parity)
1452         {
1453         case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
1454         case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1455         case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1456         default: return -EINVAL;
1457         }
1458
1459         info->params.encoding = new_encoding;
1460         info->params.crc_type = new_crctype;
1461
1462         /* if network interface up, reprogram hardware */
1463         if (info->netcount)
1464                 program_hw(info);
1465
1466         return 0;
1467 }
1468
1469 /**
1470  * called by generic HDLC layer to send frame
1471  *
1472  * skb  socket buffer containing HDLC frame
1473  * dev  pointer to network device structure
1474  *
1475  * returns 0 if success, otherwise error code
1476  */
1477 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1478 {
1479         struct slgt_info *info = dev_to_port(dev);
1480         unsigned long flags;
1481
1482         DBGINFO(("%s hdlc_xmit\n", dev->name));
1483
1484         /* stop sending until this frame completes */
1485         netif_stop_queue(dev);
1486
1487         /* copy data to device buffers */
1488         info->tx_count = skb->len;
1489         tx_load(info, skb->data, skb->len);
1490
1491         /* update network statistics */
1492         dev->stats.tx_packets++;
1493         dev->stats.tx_bytes += skb->len;
1494
1495         /* done with socket buffer, so free it */
1496         dev_kfree_skb(skb);
1497
1498         /* save start time for transmit timeout detection */
1499         dev->trans_start = jiffies;
1500
1501         /* start hardware transmitter if necessary */
1502         spin_lock_irqsave(&info->lock,flags);
1503         if (!info->tx_active)
1504                 tx_start(info);
1505         spin_unlock_irqrestore(&info->lock,flags);
1506
1507         return 0;
1508 }
1509
1510 /**
1511  * called by network layer when interface enabled
1512  * claim resources and initialize hardware
1513  *
1514  * dev  pointer to network device structure
1515  *
1516  * returns 0 if success, otherwise error code
1517  */
1518 static int hdlcdev_open(struct net_device *dev)
1519 {
1520         struct slgt_info *info = dev_to_port(dev);
1521         int rc;
1522         unsigned long flags;
1523
1524         if (!try_module_get(THIS_MODULE))
1525                 return -EBUSY;
1526
1527         DBGINFO(("%s hdlcdev_open\n", dev->name));
1528
1529         /* generic HDLC layer open processing */
1530         if ((rc = hdlc_open(dev)))
1531                 return rc;
1532
1533         /* arbitrate between network and tty opens */
1534         spin_lock_irqsave(&info->netlock, flags);
1535         if (info->port.count != 0 || info->netcount != 0) {
1536                 DBGINFO(("%s hdlc_open busy\n", dev->name));
1537                 spin_unlock_irqrestore(&info->netlock, flags);
1538                 return -EBUSY;
1539         }
1540         info->netcount=1;
1541         spin_unlock_irqrestore(&info->netlock, flags);
1542
1543         /* claim resources and init adapter */
1544         if ((rc = startup(info)) != 0) {
1545                 spin_lock_irqsave(&info->netlock, flags);
1546                 info->netcount=0;
1547                 spin_unlock_irqrestore(&info->netlock, flags);
1548                 return rc;
1549         }
1550
1551         /* assert DTR and RTS, apply hardware settings */
1552         info->signals |= SerialSignal_RTS + SerialSignal_DTR;
1553         program_hw(info);
1554
1555         /* enable network layer transmit */
1556         dev->trans_start = jiffies;
1557         netif_start_queue(dev);
1558
1559         /* inform generic HDLC layer of current DCD status */
1560         spin_lock_irqsave(&info->lock, flags);
1561         get_signals(info);
1562         spin_unlock_irqrestore(&info->lock, flags);
1563         if (info->signals & SerialSignal_DCD)
1564                 netif_carrier_on(dev);
1565         else
1566                 netif_carrier_off(dev);
1567         return 0;
1568 }
1569
1570 /**
1571  * called by network layer when interface is disabled
1572  * shutdown hardware and release resources
1573  *
1574  * dev  pointer to network device structure
1575  *
1576  * returns 0 if success, otherwise error code
1577  */
1578 static int hdlcdev_close(struct net_device *dev)
1579 {
1580         struct slgt_info *info = dev_to_port(dev);
1581         unsigned long flags;
1582
1583         DBGINFO(("%s hdlcdev_close\n", dev->name));
1584
1585         netif_stop_queue(dev);
1586
1587         /* shutdown adapter and release resources */
1588         shutdown(info);
1589
1590         hdlc_close(dev);
1591
1592         spin_lock_irqsave(&info->netlock, flags);
1593         info->netcount=0;
1594         spin_unlock_irqrestore(&info->netlock, flags);
1595
1596         module_put(THIS_MODULE);
1597         return 0;
1598 }
1599
1600 /**
1601  * called by network layer to process IOCTL call to network device
1602  *
1603  * dev  pointer to network device structure
1604  * ifr  pointer to network interface request structure
1605  * cmd  IOCTL command code
1606  *
1607  * returns 0 if success, otherwise error code
1608  */
1609 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1610 {
1611         const size_t size = sizeof(sync_serial_settings);
1612         sync_serial_settings new_line;
1613         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1614         struct slgt_info *info = dev_to_port(dev);
1615         unsigned int flags;
1616
1617         DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1618
1619         /* return error if TTY interface open */
1620         if (info->port.count)
1621                 return -EBUSY;
1622
1623         if (cmd != SIOCWANDEV)
1624                 return hdlc_ioctl(dev, ifr, cmd);
1625
1626         switch(ifr->ifr_settings.type) {
1627         case IF_GET_IFACE: /* return current sync_serial_settings */
1628
1629                 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1630                 if (ifr->ifr_settings.size < size) {
1631                         ifr->ifr_settings.size = size; /* data size wanted */
1632                         return -ENOBUFS;
1633                 }
1634
1635                 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1636                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1637                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1638                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1639
1640                 switch (flags){
1641                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1642                 case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
1643                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
1644                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1645                 default: new_line.clock_type = CLOCK_DEFAULT;
1646                 }
1647
1648                 new_line.clock_rate = info->params.clock_speed;
1649                 new_line.loopback   = info->params.loopback ? 1:0;
1650
1651                 if (copy_to_user(line, &new_line, size))
1652                         return -EFAULT;
1653                 return 0;
1654
1655         case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1656
1657                 if(!capable(CAP_NET_ADMIN))
1658                         return -EPERM;
1659                 if (copy_from_user(&new_line, line, size))
1660                         return -EFAULT;
1661
1662                 switch (new_line.clock_type)
1663                 {
1664                 case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1665                 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1666                 case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
1667                 case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
1668                 case CLOCK_DEFAULT:  flags = info->params.flags &
1669                                              (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1670                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1671                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1672                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
1673                 default: return -EINVAL;
1674                 }
1675
1676                 if (new_line.loopback != 0 && new_line.loopback != 1)
1677                         return -EINVAL;
1678
1679                 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1680                                         HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1681                                         HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1682                                         HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1683                 info->params.flags |= flags;
1684
1685                 info->params.loopback = new_line.loopback;
1686
1687                 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1688                         info->params.clock_speed = new_line.clock_rate;
1689                 else
1690                         info->params.clock_speed = 0;
1691
1692                 /* if network interface up, reprogram hardware */
1693                 if (info->netcount)
1694                         program_hw(info);
1695                 return 0;
1696
1697         default:
1698                 return hdlc_ioctl(dev, ifr, cmd);
1699         }
1700 }
1701
1702 /**
1703  * called by network layer when transmit timeout is detected
1704  *
1705  * dev  pointer to network device structure
1706  */
1707 static void hdlcdev_tx_timeout(struct net_device *dev)
1708 {
1709         struct slgt_info *info = dev_to_port(dev);
1710         unsigned long flags;
1711
1712         DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1713
1714         dev->stats.tx_errors++;
1715         dev->stats.tx_aborted_errors++;
1716
1717         spin_lock_irqsave(&info->lock,flags);
1718         tx_stop(info);
1719         spin_unlock_irqrestore(&info->lock,flags);
1720
1721         netif_wake_queue(dev);
1722 }
1723
1724 /**
1725  * called by device driver when transmit completes
1726  * reenable network layer transmit if stopped
1727  *
1728  * info  pointer to device instance information
1729  */
1730 static void hdlcdev_tx_done(struct slgt_info *info)
1731 {
1732         if (netif_queue_stopped(info->netdev))
1733                 netif_wake_queue(info->netdev);
1734 }
1735
1736 /**
1737  * called by device driver when frame received
1738  * pass frame to network layer
1739  *
1740  * info  pointer to device instance information
1741  * buf   pointer to buffer contianing frame data
1742  * size  count of data bytes in buf
1743  */
1744 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1745 {
1746         struct sk_buff *skb = dev_alloc_skb(size);
1747         struct net_device *dev = info->netdev;
1748
1749         DBGINFO(("%s hdlcdev_rx\n", dev->name));
1750
1751         if (skb == NULL) {
1752                 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1753                 dev->stats.rx_dropped++;
1754                 return;
1755         }
1756
1757         memcpy(skb_put(skb, size), buf, size);
1758
1759         skb->protocol = hdlc_type_trans(skb, dev);
1760
1761         dev->stats.rx_packets++;
1762         dev->stats.rx_bytes += size;
1763
1764         netif_rx(skb);
1765 }
1766
1767 static const struct net_device_ops hdlcdev_ops = {
1768         .ndo_open       = hdlcdev_open,
1769         .ndo_stop       = hdlcdev_close,
1770         .ndo_change_mtu = hdlc_change_mtu,
1771         .ndo_start_xmit = hdlc_start_xmit,
1772         .ndo_do_ioctl   = hdlcdev_ioctl,
1773         .ndo_tx_timeout = hdlcdev_tx_timeout,
1774 };
1775
1776 /**
1777  * called by device driver when adding device instance
1778  * do generic HDLC initialization
1779  *
1780  * info  pointer to device instance information
1781  *
1782  * returns 0 if success, otherwise error code
1783  */
1784 static int hdlcdev_init(struct slgt_info *info)
1785 {
1786         int rc;
1787         struct net_device *dev;
1788         hdlc_device *hdlc;
1789
1790         /* allocate and initialize network and HDLC layer objects */
1791
1792         if (!(dev = alloc_hdlcdev(info))) {
1793                 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1794                 return -ENOMEM;
1795         }
1796
1797         /* for network layer reporting purposes only */
1798         dev->mem_start = info->phys_reg_addr;
1799         dev->mem_end   = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1800         dev->irq       = info->irq_level;
1801
1802         /* network layer callbacks and settings */
1803         dev->netdev_ops     = &hdlcdev_ops;
1804         dev->watchdog_timeo = 10 * HZ;
1805         dev->tx_queue_len   = 50;
1806
1807         /* generic HDLC layer callbacks and settings */
1808         hdlc         = dev_to_hdlc(dev);
1809         hdlc->attach = hdlcdev_attach;
1810         hdlc->xmit   = hdlcdev_xmit;
1811
1812         /* register objects with HDLC layer */
1813         if ((rc = register_hdlc_device(dev))) {
1814                 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1815                 free_netdev(dev);
1816                 return rc;
1817         }
1818
1819         info->netdev = dev;
1820         return 0;
1821 }
1822
1823 /**
1824  * called by device driver when removing device instance
1825  * do generic HDLC cleanup
1826  *
1827  * info  pointer to device instance information
1828  */
1829 static void hdlcdev_exit(struct slgt_info *info)
1830 {
1831         unregister_hdlc_device(info->netdev);
1832         free_netdev(info->netdev);
1833         info->netdev = NULL;
1834 }
1835
1836 #endif /* ifdef CONFIG_HDLC */
1837
1838 /*
1839  * get async data from rx DMA buffers
1840  */
1841 static void rx_async(struct slgt_info *info)
1842 {
1843         struct tty_struct *tty = info->port.tty;
1844         struct mgsl_icount *icount = &info->icount;
1845         unsigned int start, end;
1846         unsigned char *p;
1847         unsigned char status;
1848         struct slgt_desc *bufs = info->rbufs;
1849         int i, count;
1850         int chars = 0;
1851         int stat;
1852         unsigned char ch;
1853
1854         start = end = info->rbuf_current;
1855
1856         while(desc_complete(bufs[end])) {
1857                 count = desc_count(bufs[end]) - info->rbuf_index;
1858                 p     = bufs[end].buf + info->rbuf_index;
1859
1860                 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1861                 DBGDATA(info, p, count, "rx");
1862
1863                 for(i=0 ; i < count; i+=2, p+=2) {
1864                         ch = *p;
1865                         icount->rx++;
1866
1867                         stat = 0;
1868
1869                         if ((status = *(p+1) & (BIT1 + BIT0))) {
1870                                 if (status & BIT1)
1871                                         icount->parity++;
1872                                 else if (status & BIT0)
1873                                         icount->frame++;
1874                                 /* discard char if tty control flags say so */
1875                                 if (status & info->ignore_status_mask)
1876                                         continue;
1877                                 if (status & BIT1)
1878                                         stat = TTY_PARITY;
1879                                 else if (status & BIT0)
1880                                         stat = TTY_FRAME;
1881                         }
1882                         if (tty) {
1883                                 tty_insert_flip_char(tty, ch, stat);
1884                                 chars++;
1885                         }
1886                 }
1887
1888                 if (i < count) {
1889                         /* receive buffer not completed */
1890                         info->rbuf_index += i;
1891                         mod_timer(&info->rx_timer, jiffies + 1);
1892                         break;
1893                 }
1894
1895                 info->rbuf_index = 0;
1896                 free_rbufs(info, end, end);
1897
1898                 if (++end == info->rbuf_count)
1899                         end = 0;
1900
1901                 /* if entire list searched then no frame available */
1902                 if (end == start)
1903                         break;
1904         }
1905
1906         if (tty && chars)
1907                 tty_flip_buffer_push(tty);
1908 }
1909
1910 /*
1911  * return next bottom half action to perform
1912  */
1913 static int bh_action(struct slgt_info *info)
1914 {
1915         unsigned long flags;
1916         int rc;
1917
1918         spin_lock_irqsave(&info->lock,flags);
1919
1920         if (info->pending_bh & BH_RECEIVE) {
1921                 info->pending_bh &= ~BH_RECEIVE;
1922                 rc = BH_RECEIVE;
1923         } else if (info->pending_bh & BH_TRANSMIT) {
1924                 info->pending_bh &= ~BH_TRANSMIT;
1925                 rc = BH_TRANSMIT;
1926         } else if (info->pending_bh & BH_STATUS) {
1927                 info->pending_bh &= ~BH_STATUS;
1928                 rc = BH_STATUS;
1929         } else {
1930                 /* Mark BH routine as complete */
1931                 info->bh_running = false;
1932                 info->bh_requested = false;
1933                 rc = 0;
1934         }
1935
1936         spin_unlock_irqrestore(&info->lock,flags);
1937
1938         return rc;
1939 }
1940
1941 /*
1942  * perform bottom half processing
1943  */
1944 static void bh_handler(struct work_struct *work)
1945 {
1946         struct slgt_info *info = container_of(work, struct slgt_info, task);
1947         int action;
1948
1949         if (!info)
1950                 return;
1951         info->bh_running = true;
1952
1953         while((action = bh_action(info))) {
1954                 switch (action) {
1955                 case BH_RECEIVE:
1956                         DBGBH(("%s bh receive\n", info->device_name));
1957                         switch(info->params.mode) {
1958                         case MGSL_MODE_ASYNC:
1959                                 rx_async(info);
1960                                 break;
1961                         case MGSL_MODE_HDLC:
1962                                 while(rx_get_frame(info));
1963                                 break;
1964                         case MGSL_MODE_RAW:
1965                         case MGSL_MODE_MONOSYNC:
1966                         case MGSL_MODE_BISYNC:
1967                                 while(rx_get_buf(info));
1968                                 break;
1969                         }
1970                         /* restart receiver if rx DMA buffers exhausted */
1971                         if (info->rx_restart)
1972                                 rx_start(info);
1973                         break;
1974                 case BH_TRANSMIT:
1975                         bh_transmit(info);
1976                         break;
1977                 case BH_STATUS:
1978                         DBGBH(("%s bh status\n", info->device_name));
1979                         info->ri_chkcount = 0;
1980                         info->dsr_chkcount = 0;
1981                         info->dcd_chkcount = 0;
1982                         info->cts_chkcount = 0;
1983                         break;
1984                 default:
1985                         DBGBH(("%s unknown action\n", info->device_name));
1986                         break;
1987                 }
1988         }
1989         DBGBH(("%s bh_handler exit\n", info->device_name));
1990 }
1991
1992 static void bh_transmit(struct slgt_info *info)
1993 {
1994         struct tty_struct *tty = info->port.tty;
1995
1996         DBGBH(("%s bh_transmit\n", info->device_name));
1997         if (tty)
1998                 tty_wakeup(tty);
1999 }
2000
2001 static void dsr_change(struct slgt_info *info, unsigned short status)
2002 {
2003         if (status & BIT3) {
2004                 info->signals |= SerialSignal_DSR;
2005                 info->input_signal_events.dsr_up++;
2006         } else {
2007                 info->signals &= ~SerialSignal_DSR;
2008                 info->input_signal_events.dsr_down++;
2009         }
2010         DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
2011         if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2012                 slgt_irq_off(info, IRQ_DSR);
2013                 return;
2014         }
2015         info->icount.dsr++;
2016         wake_up_interruptible(&info->status_event_wait_q);
2017         wake_up_interruptible(&info->event_wait_q);
2018         info->pending_bh |= BH_STATUS;
2019 }
2020
2021 static void cts_change(struct slgt_info *info, unsigned short status)
2022 {
2023         if (status & BIT2) {
2024                 info->signals |= SerialSignal_CTS;
2025                 info->input_signal_events.cts_up++;
2026         } else {
2027                 info->signals &= ~SerialSignal_CTS;
2028                 info->input_signal_events.cts_down++;
2029         }
2030         DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
2031         if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2032                 slgt_irq_off(info, IRQ_CTS);
2033                 return;
2034         }
2035         info->icount.cts++;
2036         wake_up_interruptible(&info->status_event_wait_q);
2037         wake_up_interruptible(&info->event_wait_q);
2038         info->pending_bh |= BH_STATUS;
2039
2040         if (info->port.flags & ASYNC_CTS_FLOW) {
2041                 if (info->port.tty) {
2042                         if (info->port.tty->hw_stopped) {
2043                                 if (info->signals & SerialSignal_CTS) {
2044                                         info->port.tty->hw_stopped = 0;
2045                                         info->pending_bh |= BH_TRANSMIT;
2046                                         return;
2047                                 }
2048                         } else {
2049                                 if (!(info->signals & SerialSignal_CTS))
2050                                         info->port.tty->hw_stopped = 1;
2051                         }
2052                 }
2053         }
2054 }
2055
2056 static void dcd_change(struct slgt_info *info, unsigned short status)
2057 {
2058         if (status & BIT1) {
2059                 info->signals |= SerialSignal_DCD;
2060                 info->input_signal_events.dcd_up++;
2061         } else {
2062                 info->signals &= ~SerialSignal_DCD;
2063                 info->input_signal_events.dcd_down++;
2064         }
2065         DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
2066         if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2067                 slgt_irq_off(info, IRQ_DCD);
2068                 return;
2069         }
2070         info->icount.dcd++;
2071 #if SYNCLINK_GENERIC_HDLC
2072         if (info->netcount) {
2073                 if (info->signals & SerialSignal_DCD)
2074                         netif_carrier_on(info->netdev);
2075                 else
2076                         netif_carrier_off(info->netdev);
2077         }
2078 #endif
2079         wake_up_interruptible(&info->status_event_wait_q);
2080         wake_up_interruptible(&info->event_wait_q);
2081         info->pending_bh |= BH_STATUS;
2082
2083         if (info->port.flags & ASYNC_CHECK_CD) {
2084                 if (info->signals & SerialSignal_DCD)
2085                         wake_up_interruptible(&info->port.open_wait);
2086                 else {
2087                         if (info->port.tty)
2088                                 tty_hangup(info->port.tty);
2089                 }
2090         }
2091 }
2092
2093 static void ri_change(struct slgt_info *info, unsigned short status)
2094 {
2095         if (status & BIT0) {
2096                 info->signals |= SerialSignal_RI;
2097                 info->input_signal_events.ri_up++;
2098         } else {
2099                 info->signals &= ~SerialSignal_RI;
2100                 info->input_signal_events.ri_down++;
2101         }
2102         DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2103         if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2104                 slgt_irq_off(info, IRQ_RI);
2105                 return;
2106         }
2107         info->icount.rng++;
2108         wake_up_interruptible(&info->status_event_wait_q);
2109         wake_up_interruptible(&info->event_wait_q);
2110         info->pending_bh |= BH_STATUS;
2111 }
2112
2113 static void isr_serial(struct slgt_info *info)
2114 {
2115         unsigned short status = rd_reg16(info, SSR);
2116
2117         DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2118
2119         wr_reg16(info, SSR, status); /* clear pending */
2120
2121         info->irq_occurred = true;
2122
2123         if (info->params.mode == MGSL_MODE_ASYNC) {
2124                 if (status & IRQ_TXIDLE) {
2125                         if (info->tx_count)
2126                                 isr_txeom(info, status);
2127                 }
2128                 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2129                         info->icount.brk++;
2130                         /* process break detection if tty control allows */
2131                         if (info->port.tty) {
2132                                 if (!(status & info->ignore_status_mask)) {
2133                                         if (info->read_status_mask & MASK_BREAK) {
2134                                                 tty_insert_flip_char(info->port.tty, 0, TTY_BREAK);
2135                                                 if (info->port.flags & ASYNC_SAK)
2136                                                         do_SAK(info->port.tty);
2137                                         }
2138                                 }
2139                         }
2140                 }
2141         } else {
2142                 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2143                         isr_txeom(info, status);
2144
2145                 if (status & IRQ_RXIDLE) {
2146                         if (status & RXIDLE)
2147                                 info->icount.rxidle++;
2148                         else
2149                                 info->icount.exithunt++;
2150                         wake_up_interruptible(&info->event_wait_q);
2151                 }
2152
2153                 if (status & IRQ_RXOVER)
2154                         rx_start(info);
2155         }
2156
2157         if (status & IRQ_DSR)
2158                 dsr_change(info, status);
2159         if (status & IRQ_CTS)
2160                 cts_change(info, status);
2161         if (status & IRQ_DCD)
2162                 dcd_change(info, status);
2163         if (status & IRQ_RI)
2164                 ri_change(info, status);
2165 }
2166
2167 static void isr_rdma(struct slgt_info *info)
2168 {
2169         unsigned int status = rd_reg32(info, RDCSR);
2170
2171         DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2172
2173         /* RDCSR (rx DMA control/status)
2174          *
2175          * 31..07  reserved
2176          * 06      save status byte to DMA buffer
2177          * 05      error
2178          * 04      eol (end of list)
2179          * 03      eob (end of buffer)
2180          * 02      IRQ enable
2181          * 01      reset
2182          * 00      enable
2183          */
2184         wr_reg32(info, RDCSR, status);  /* clear pending */
2185
2186         if (status & (BIT5 + BIT4)) {
2187                 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2188                 info->rx_restart = true;
2189         }
2190         info->pending_bh |= BH_RECEIVE;
2191 }
2192
2193 static void isr_tdma(struct slgt_info *info)
2194 {
2195         unsigned int status = rd_reg32(info, TDCSR);
2196
2197         DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2198
2199         /* TDCSR (tx DMA control/status)
2200          *
2201          * 31..06  reserved
2202          * 05      error
2203          * 04      eol (end of list)
2204          * 03      eob (end of buffer)
2205          * 02      IRQ enable
2206          * 01      reset
2207          * 00      enable
2208          */
2209         wr_reg32(info, TDCSR, status);  /* clear pending */
2210
2211         if (status & (BIT5 + BIT4 + BIT3)) {
2212                 // another transmit buffer has completed
2213                 // run bottom half to get more send data from user
2214                 info->pending_bh |= BH_TRANSMIT;
2215         }
2216 }
2217
2218 static void isr_txeom(struct slgt_info *info, unsigned short status)
2219 {
2220         DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2221
2222         slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2223         tdma_reset(info);
2224         reset_tbufs(info);
2225         if (status & IRQ_TXUNDER) {
2226                 unsigned short val = rd_reg16(info, TCR);
2227                 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2228                 wr_reg16(info, TCR, val); /* clear reset bit */
2229         }
2230
2231         if (info->tx_active) {
2232                 if (info->params.mode != MGSL_MODE_ASYNC) {
2233                         if (status & IRQ_TXUNDER)
2234                                 info->icount.txunder++;
2235                         else if (status & IRQ_TXIDLE)
2236                                 info->icount.txok++;
2237                 }
2238
2239                 info->tx_active = false;
2240                 info->tx_count = 0;
2241
2242                 del_timer(&info->tx_timer);
2243
2244                 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2245                         info->signals &= ~SerialSignal_RTS;
2246                         info->drop_rts_on_tx_done = false;
2247                         set_signals(info);
2248                 }
2249
2250 #if SYNCLINK_GENERIC_HDLC
2251                 if (info->netcount)
2252                         hdlcdev_tx_done(info);
2253                 else
2254 #endif
2255                 {
2256                         if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2257                                 tx_stop(info);
2258                                 return;
2259                         }
2260                         info->pending_bh |= BH_TRANSMIT;
2261                 }
2262         }
2263 }
2264
2265 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2266 {
2267         struct cond_wait *w, *prev;
2268
2269         /* wake processes waiting for specific transitions */
2270         for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2271                 if (w->data & changed) {
2272                         w->data = state;
2273                         wake_up_interruptible(&w->q);
2274                         if (prev != NULL)
2275                                 prev->next = w->next;
2276                         else
2277                                 info->gpio_wait_q = w->next;
2278                 } else
2279                         prev = w;
2280         }
2281 }
2282
2283 /* interrupt service routine
2284  *
2285  *      irq     interrupt number
2286  *      dev_id  device ID supplied during interrupt registration
2287  */
2288 static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
2289 {
2290         struct slgt_info *info = dev_id;
2291         unsigned int gsr;
2292         unsigned int i;
2293
2294         DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
2295
2296         spin_lock(&info->lock);
2297
2298         while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2299                 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2300                 info->irq_occurred = true;
2301                 for(i=0; i < info->port_count ; i++) {
2302                         if (info->port_array[i] == NULL)
2303                                 continue;
2304                         if (gsr & (BIT8 << i))
2305                                 isr_serial(info->port_array[i]);
2306                         if (gsr & (BIT16 << (i*2)))
2307                                 isr_rdma(info->port_array[i]);
2308                         if (gsr & (BIT17 << (i*2)))
2309                                 isr_tdma(info->port_array[i]);
2310                 }
2311         }
2312
2313         if (info->gpio_present) {
2314                 unsigned int state;
2315                 unsigned int changed;
2316                 while ((changed = rd_reg32(info, IOSR)) != 0) {
2317                         DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2318                         /* read latched state of GPIO signals */
2319                         state = rd_reg32(info, IOVR);
2320                         /* clear pending GPIO interrupt bits */
2321                         wr_reg32(info, IOSR, changed);
2322                         for (i=0 ; i < info->port_count ; i++) {
2323                                 if (info->port_array[i] != NULL)
2324                                         isr_gpio(info->port_array[i], changed, state);
2325                         }
2326                 }
2327         }
2328
2329         for(i=0; i < info->port_count ; i++) {
2330                 struct slgt_info *port = info->port_array[i];
2331
2332                 if (port && (port->port.count || port->netcount) &&
2333                     port->pending_bh && !port->bh_running &&
2334                     !port->bh_requested) {
2335                         DBGISR(("%s bh queued\n", port->device_name));
2336                         schedule_work(&port->task);
2337                         port->bh_requested = true;
2338                 }
2339         }
2340
2341         spin_unlock(&info->lock);
2342
2343         DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
2344         return IRQ_HANDLED;
2345 }
2346
2347 static int startup(struct slgt_info *info)
2348 {
2349         DBGINFO(("%s startup\n", info->device_name));
2350
2351         if (info->port.flags & ASYNC_INITIALIZED)
2352                 return 0;
2353
2354         if (!info->tx_buf) {
2355                 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2356                 if (!info->tx_buf) {
2357                         DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2358                         return -ENOMEM;
2359                 }
2360         }
2361
2362         info->pending_bh = 0;
2363
2364         memset(&info->icount, 0, sizeof(info->icount));
2365
2366         /* program hardware for current parameters */
2367         change_params(info);
2368
2369         if (info->port.tty)
2370                 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2371
2372         info->port.flags |= ASYNC_INITIALIZED;
2373
2374         return 0;
2375 }
2376
2377 /*
2378  *  called by close() and hangup() to shutdown hardware
2379  */
2380 static void shutdown(struct slgt_info *info)
2381 {
2382         unsigned long flags;
2383
2384         if (!(info->port.flags & ASYNC_INITIALIZED))
2385                 return;
2386
2387         DBGINFO(("%s shutdown\n", info->device_name));
2388
2389         /* clear status wait queue because status changes */
2390         /* can't happen after shutting down the hardware */
2391         wake_up_interruptible(&info->status_event_wait_q);
2392         wake_up_interruptible(&info->event_wait_q);
2393
2394         del_timer_sync(&info->tx_timer);
2395         del_timer_sync(&info->rx_timer);
2396
2397         kfree(info->tx_buf);
2398         info->tx_buf = NULL;
2399
2400         spin_lock_irqsave(&info->lock,flags);
2401
2402         tx_stop(info);
2403         rx_stop(info);
2404
2405         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2406
2407         if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
2408                 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2409                 set_signals(info);
2410         }
2411
2412         flush_cond_wait(&info->gpio_wait_q);
2413
2414         spin_unlock_irqrestore(&info->lock,flags);
2415
2416         if (info->port.tty)
2417                 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2418
2419         info->port.flags &= ~ASYNC_INITIALIZED;
2420 }
2421
2422 static void program_hw(struct slgt_info *info)
2423 {
2424         unsigned long flags;
2425
2426         spin_lock_irqsave(&info->lock,flags);
2427
2428         rx_stop(info);
2429         tx_stop(info);
2430
2431         if (info->params.mode != MGSL_MODE_ASYNC ||
2432             info->netcount)
2433                 sync_mode(info);
2434         else
2435                 async_mode(info);
2436
2437         set_signals(info);
2438
2439         info->dcd_chkcount = 0;
2440         info->cts_chkcount = 0;
2441         info->ri_chkcount = 0;
2442         info->dsr_chkcount = 0;
2443
2444         slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
2445         get_signals(info);
2446
2447         if (info->netcount ||
2448             (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
2449                 rx_start(info);
2450
2451         spin_unlock_irqrestore(&info->lock,flags);
2452 }
2453
2454 /*
2455  * reconfigure adapter based on new parameters
2456  */
2457 static void change_params(struct slgt_info *info)
2458 {
2459         unsigned cflag;
2460         int bits_per_char;
2461
2462         if (!info->port.tty || !info->port.tty->termios)
2463                 return;
2464         DBGINFO(("%s change_params\n", info->device_name));
2465
2466         cflag = info->port.tty->termios->c_cflag;
2467
2468         /* if B0 rate (hangup) specified then negate DTR and RTS */
2469         /* otherwise assert DTR and RTS */
2470         if (cflag & CBAUD)
2471                 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
2472         else
2473                 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2474
2475         /* byte size and parity */
2476
2477         switch (cflag & CSIZE) {
2478         case CS5: info->params.data_bits = 5; break;
2479         case CS6: info->params.data_bits = 6; break;
2480         case CS7: info->params.data_bits = 7; break;
2481         case CS8: info->params.data_bits = 8; break;
2482         default:  info->params.data_bits = 7; break;
2483         }
2484
2485         info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2486
2487         if (cflag & PARENB)
2488                 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2489         else
2490                 info->params.parity = ASYNC_PARITY_NONE;
2491
2492         /* calculate number of jiffies to transmit a full
2493          * FIFO (32 bytes) at specified data rate
2494          */
2495         bits_per_char = info->params.data_bits +
2496                         info->params.stop_bits + 1;
2497
2498         info->params.data_rate = tty_get_baud_rate(info->port.tty);
2499
2500         if (info->params.data_rate) {
2501                 info->timeout = (32*HZ*bits_per_char) /
2502                                 info->params.data_rate;
2503         }
2504         info->timeout += HZ/50;         /* Add .02 seconds of slop */
2505
2506         if (cflag & CRTSCTS)
2507                 info->port.flags |= ASYNC_CTS_FLOW;
2508         else
2509                 info->port.flags &= ~ASYNC_CTS_FLOW;
2510
2511         if (cflag & CLOCAL)
2512                 info->port.flags &= ~ASYNC_CHECK_CD;
2513         else
2514                 info->port.flags |= ASYNC_CHECK_CD;
2515
2516         /* process tty input control flags */
2517
2518         info->read_status_mask = IRQ_RXOVER;
2519         if (I_INPCK(info->port.tty))
2520                 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2521         if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2522                 info->read_status_mask |= MASK_BREAK;
2523         if (I_IGNPAR(info->port.tty))
2524                 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2525         if (I_IGNBRK(info->port.tty)) {
2526                 info->ignore_status_mask |= MASK_BREAK;
2527                 /* If ignoring parity and break indicators, ignore
2528                  * overruns too.  (For real raw support).
2529                  */
2530                 if (I_IGNPAR(info->port.tty))
2531                         info->ignore_status_mask |= MASK_OVERRUN;
2532         }
2533
2534         program_hw(info);
2535 }
2536
2537 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2538 {
2539         DBGINFO(("%s get_stats\n",  info->device_name));
2540         if (!user_icount) {
2541                 memset(&info->icount, 0, sizeof(info->icount));
2542         } else {
2543                 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2544                         return -EFAULT;
2545         }
2546         return 0;
2547 }
2548
2549 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2550 {
2551         DBGINFO(("%s get_params\n", info->device_name));
2552         if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2553                 return -EFAULT;
2554         return 0;
2555 }
2556
2557 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2558 {
2559         unsigned long flags;
2560         MGSL_PARAMS tmp_params;
2561
2562         DBGINFO(("%s set_params\n", info->device_name));
2563         if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2564                 return -EFAULT;
2565
2566         spin_lock_irqsave(&info->lock, flags);
2567         if (tmp_params.mode == MGSL_MODE_BASE_CLOCK)
2568                 info->base_clock = tmp_params.clock_speed;
2569         else
2570                 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2571         spin_unlock_irqrestore(&info->lock, flags);
2572
2573         program_hw(info);
2574
2575         return 0;
2576 }
2577
2578 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2579 {
2580         DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2581         if (put_user(info->idle_mode, idle_mode))
2582                 return -EFAULT;
2583         return 0;
2584 }
2585
2586 static int set_txidle(struct slgt_info *info, int idle_mode)
2587 {
2588         unsigned long flags;
2589         DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2590         spin_lock_irqsave(&info->lock,flags);
2591         info->idle_mode = idle_mode;
2592         if (info->params.mode != MGSL_MODE_ASYNC)
2593                 tx_set_idle(info);
2594         spin_unlock_irqrestore(&info->lock,flags);
2595         return 0;
2596 }
2597
2598 static int tx_enable(struct slgt_info *info, int enable)
2599 {
2600         unsigned long flags;
2601         DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2602         spin_lock_irqsave(&info->lock,flags);
2603         if (enable) {
2604                 if (!info->tx_enabled)
2605                         tx_start(info);
2606         } else {
2607                 if (info->tx_enabled)
2608                         tx_stop(info);
2609         }
2610         spin_unlock_irqrestore(&info->lock,flags);
2611         return 0;
2612 }
2613
2614 /*
2615  * abort transmit HDLC frame
2616  */
2617 static int tx_abort(struct slgt_info *info)
2618 {
2619         unsigned long flags;
2620         DBGINFO(("%s tx_abort\n", info->device_name));
2621         spin_lock_irqsave(&info->lock,flags);
2622         tdma_reset(info);
2623         spin_unlock_irqrestore(&info->lock,flags);
2624         return 0;
2625 }
2626
2627 static int rx_enable(struct slgt_info *info, int enable)
2628 {
2629         unsigned long flags;
2630         unsigned int rbuf_fill_level;
2631         DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable));
2632         spin_lock_irqsave(&info->lock,flags);
2633         /*
2634          * enable[31..16] = receive DMA buffer fill level
2635          * 0 = noop (leave fill level unchanged)
2636          * fill level must be multiple of 4 and <= buffer size
2637          */
2638         rbuf_fill_level = ((unsigned int)enable) >> 16;
2639         if (rbuf_fill_level) {
2640                 if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) {
2641                         spin_unlock_irqrestore(&info->lock, flags);
2642                         return -EINVAL;
2643                 }
2644                 info->rbuf_fill_level = rbuf_fill_level;
2645                 rx_stop(info); /* restart receiver to use new fill level */
2646         }
2647
2648         /*
2649          * enable[1..0] = receiver enable command
2650          * 0 = disable
2651          * 1 = enable
2652          * 2 = enable or force hunt mode if already enabled
2653          */
2654         enable &= 3;
2655         if (enable) {
2656                 if (!info->rx_enabled)
2657                         rx_start(info);
2658                 else if (enable == 2) {
2659                         /* force hunt mode (write 1 to RCR[3]) */
2660                         wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
2661                 }
2662         } else {
2663                 if (info->rx_enabled)
2664                         rx_stop(info);
2665         }
2666         spin_unlock_irqrestore(&info->lock,flags);
2667         return 0;
2668 }
2669
2670 /*
2671  *  wait for specified event to occur
2672  */
2673 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2674 {
2675         unsigned long flags;
2676         int s;
2677         int rc=0;
2678         struct mgsl_icount cprev, cnow;
2679         int events;
2680         int mask;
2681         struct  _input_signal_events oldsigs, newsigs;
2682         DECLARE_WAITQUEUE(wait, current);
2683
2684         if (get_user(mask, mask_ptr))
2685                 return -EFAULT;
2686
2687         DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2688
2689         spin_lock_irqsave(&info->lock,flags);
2690
2691         /* return immediately if state matches requested events */
2692         get_signals(info);
2693         s = info->signals;
2694
2695         events = mask &
2696                 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2697                   ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2698                   ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2699                   ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2700         if (events) {
2701                 spin_unlock_irqrestore(&info->lock,flags);
2702                 goto exit;
2703         }
2704
2705         /* save current irq counts */
2706         cprev = info->icount;
2707         oldsigs = info->input_signal_events;
2708
2709         /* enable hunt and idle irqs if needed */
2710         if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2711                 unsigned short val = rd_reg16(info, SCR);
2712                 if (!(val & IRQ_RXIDLE))
2713                         wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2714         }
2715
2716         set_current_state(TASK_INTERRUPTIBLE);
2717         add_wait_queue(&info->event_wait_q, &wait);
2718
2719         spin_unlock_irqrestore(&info->lock,flags);
2720
2721         for(;;) {
2722                 schedule();
2723                 if (signal_pending(current)) {
2724                         rc = -ERESTARTSYS;
2725                         break;
2726                 }
2727
2728                 /* get current irq counts */
2729                 spin_lock_irqsave(&info->lock,flags);
2730                 cnow = info->icount;
2731                 newsigs = info->input_signal_events;
2732                 set_current_state(TASK_INTERRUPTIBLE);
2733                 spin_unlock_irqrestore(&info->lock,flags);
2734
2735                 /* if no change, wait aborted for some reason */
2736                 if (newsigs.dsr_up   == oldsigs.dsr_up   &&
2737                     newsigs.dsr_down == oldsigs.dsr_down &&
2738                     newsigs.dcd_up   == oldsigs.dcd_up   &&
2739                     newsigs.dcd_down == oldsigs.dcd_down &&
2740                     newsigs.cts_up   == oldsigs.cts_up   &&
2741                     newsigs.cts_down == oldsigs.cts_down &&
2742                     newsigs.ri_up    == oldsigs.ri_up    &&
2743                     newsigs.ri_down  == oldsigs.ri_down  &&
2744                     cnow.exithunt    == cprev.exithunt   &&
2745                     cnow.rxidle      == cprev.rxidle) {
2746                         rc = -EIO;
2747                         break;
2748                 }
2749
2750                 events = mask &
2751                         ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
2752                           (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2753                           (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
2754                           (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2755                           (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
2756                           (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2757                           (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
2758                           (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
2759                           (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
2760                           (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
2761                 if (events)
2762                         break;
2763
2764                 cprev = cnow;
2765                 oldsigs = newsigs;
2766         }
2767
2768         remove_wait_queue(&info->event_wait_q, &wait);
2769         set_current_state(TASK_RUNNING);
2770
2771
2772         if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2773                 spin_lock_irqsave(&info->lock,flags);
2774                 if (!waitqueue_active(&info->event_wait_q)) {
2775                         /* disable enable exit hunt mode/idle rcvd IRQs */
2776                         wr_reg16(info, SCR,
2777                                 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2778                 }
2779                 spin_unlock_irqrestore(&info->lock,flags);
2780         }
2781 exit:
2782         if (rc == 0)
2783                 rc = put_user(events, mask_ptr);
2784         return rc;
2785 }
2786
2787 static int get_interface(struct slgt_info *info, int __user *if_mode)
2788 {
2789         DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2790         if (put_user(info->if_mode, if_mode))
2791                 return -EFAULT;
2792         return 0;
2793 }
2794
2795 static int set_interface(struct slgt_info *info, int if_mode)
2796 {
2797         unsigned long flags;
2798         unsigned short val;
2799
2800         DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2801         spin_lock_irqsave(&info->lock,flags);
2802         info->if_mode = if_mode;
2803
2804         msc_set_vcr(info);
2805
2806         /* TCR (tx control) 07  1=RTS driver control */
2807         val = rd_reg16(info, TCR);
2808         if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2809                 val |= BIT7;
2810         else
2811                 val &= ~BIT7;
2812         wr_reg16(info, TCR, val);
2813
2814         spin_unlock_irqrestore(&info->lock,flags);
2815         return 0;
2816 }
2817
2818 /*
2819  * set general purpose IO pin state and direction
2820  *
2821  * user_gpio fields:
2822  * state   each bit indicates a pin state
2823  * smask   set bit indicates pin state to set
2824  * dir     each bit indicates a pin direction (0=input, 1=output)
2825  * dmask   set bit indicates pin direction to set
2826  */
2827 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2828 {
2829         unsigned long flags;
2830         struct gpio_desc gpio;
2831         __u32 data;
2832
2833         if (!info->gpio_present)
2834                 return -EINVAL;
2835         if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2836                 return -EFAULT;
2837         DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2838                  info->device_name, gpio.state, gpio.smask,
2839                  gpio.dir, gpio.dmask));
2840
2841         spin_lock_irqsave(&info->lock,flags);
2842         if (gpio.dmask) {
2843                 data = rd_reg32(info, IODR);
2844                 data |= gpio.dmask & gpio.dir;
2845                 data &= ~(gpio.dmask & ~gpio.dir);
2846                 wr_reg32(info, IODR, data);
2847         }
2848         if (gpio.smask) {
2849                 data = rd_reg32(info, IOVR);
2850                 data |= gpio.smask & gpio.state;
2851                 data &= ~(gpio.smask & ~gpio.state);
2852                 wr_reg32(info, IOVR, data);
2853         }
2854         spin_unlock_irqrestore(&info->lock,flags);
2855
2856         return 0;
2857 }
2858
2859 /*
2860  * get general purpose IO pin state and direction
2861  */
2862 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2863 {
2864         struct gpio_desc gpio;
2865         if (!info->gpio_present)
2866                 return -EINVAL;
2867         gpio.state = rd_reg32(info, IOVR);
2868         gpio.smask = 0xffffffff;
2869         gpio.dir   = rd_reg32(info, IODR);
2870         gpio.dmask = 0xffffffff;
2871         if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2872                 return -EFAULT;
2873         DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
2874                  info->device_name, gpio.state, gpio.dir));
2875         return 0;
2876 }
2877
2878 /*
2879  * conditional wait facility
2880  */
2881 static void init_cond_wait(struct cond_wait *w, unsigned int data)
2882 {
2883         init_waitqueue_head(&w->q);
2884         init_waitqueue_entry(&w->wait, current);
2885         w->data = data;
2886 }
2887
2888 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
2889 {
2890         set_current_state(TASK_INTERRUPTIBLE);
2891         add_wait_queue(&w->q, &w->wait);
2892         w->next = *head;
2893         *head = w;
2894 }
2895
2896 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
2897 {
2898         struct cond_wait *w, *prev;
2899         remove_wait_queue(&cw->q, &cw->wait);
2900         set_current_state(TASK_RUNNING);
2901         for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
2902                 if (w == cw) {
2903                         if (prev != NULL)
2904                                 prev->next = w->next;
2905                         else
2906                                 *head = w->next;
2907                         break;
2908                 }
2909         }
2910 }
2911
2912 static void flush_cond_wait(struct cond_wait **head)
2913 {
2914         while (*head != NULL) {
2915                 wake_up_interruptible(&(*head)->q);
2916                 *head = (*head)->next;
2917         }
2918 }
2919
2920 /*
2921  * wait for general purpose I/O pin(s) to enter specified state
2922  *
2923  * user_gpio fields:
2924  * state - bit indicates target pin state
2925  * smask - set bit indicates watched pin
2926  *
2927  * The wait ends when at least one watched pin enters the specified
2928  * state. When 0 (no error) is returned, user_gpio->state is set to the
2929  * state of all GPIO pins when the wait ends.
2930  *
2931  * Note: Each pin may be a dedicated input, dedicated output, or
2932  * configurable input/output. The number and configuration of pins
2933  * varies with the specific adapter model. Only input pins (dedicated
2934  * or configured) can be monitored with this function.
2935  */
2936 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2937 {
2938         unsigned long flags;
2939         int rc = 0;
2940         struct gpio_desc gpio;
2941         struct cond_wait wait;
2942         u32 state;
2943
2944         if (!info->gpio_present)
2945                 return -EINVAL;
2946         if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2947                 return -EFAULT;
2948         DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
2949                  info->device_name, gpio.state, gpio.smask));
2950         /* ignore output pins identified by set IODR bit */
2951         if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
2952                 return -EINVAL;
2953         init_cond_wait(&wait, gpio.smask);
2954
2955         spin_lock_irqsave(&info->lock, flags);
2956         /* enable interrupts for watched pins */
2957         wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
2958         /* get current pin states */
2959         state = rd_reg32(info, IOVR);
2960
2961         if (gpio.smask & ~(state ^ gpio.state)) {
2962                 /* already in target state */
2963                 gpio.state = state;
2964         } else {
2965                 /* wait for target state */
2966                 add_cond_wait(&info->gpio_wait_q, &wait);
2967                 spin_unlock_irqrestore(&info->lock, flags);
2968                 schedule();
2969                 if (signal_pending(current))
2970                         rc = -ERESTARTSYS;
2971                 else
2972                         gpio.state = wait.data;
2973                 spin_lock_irqsave(&info->lock, flags);
2974                 remove_cond_wait(&info->gpio_wait_q, &wait);
2975         }
2976
2977         /* disable all GPIO interrupts if no waiting processes */
2978         if (info->gpio_wait_q == NULL)
2979                 wr_reg32(info, IOER, 0);
2980         spin_unlock_irqrestore(&info->lock,flags);
2981
2982         if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2983                 rc = -EFAULT;
2984         return rc;
2985 }
2986
2987 static int modem_input_wait(struct slgt_info *info,int arg)
2988 {
2989         unsigned long flags;
2990         int rc;
2991         struct mgsl_icount cprev, cnow;
2992         DECLARE_WAITQUEUE(wait, current);
2993
2994         /* save current irq counts */
2995         spin_lock_irqsave(&info->lock,flags);
2996         cprev = info->icount;
2997         add_wait_queue(&info->status_event_wait_q, &wait);
2998         set_current_state(TASK_INTERRUPTIBLE);
2999         spin_unlock_irqrestore(&info->lock,flags);
3000
3001         for(;;) {
3002                 schedule();
3003                 if (signal_pending(current)) {
3004                         rc = -ERESTARTSYS;
3005                         break;
3006                 }
3007
3008                 /* get new irq counts */
3009                 spin_lock_irqsave(&info->lock,flags);
3010                 cnow = info->icount;
3011                 set_current_state(TASK_INTERRUPTIBLE);
3012                 spin_unlock_irqrestore(&info->lock,flags);
3013
3014                 /* if no change, wait aborted for some reason */
3015                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3016                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3017                         rc = -EIO;
3018                         break;
3019                 }
3020
3021                 /* check for change in caller specified modem input */
3022                 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3023                     (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3024                     (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
3025                     (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3026                         rc = 0;
3027                         break;
3028                 }
3029
3030                 cprev = cnow;
3031         }
3032         remove_wait_queue(&info->status_event_wait_q, &wait);
3033         set_current_state(TASK_RUNNING);
3034         return rc;
3035 }
3036
3037 /*
3038  *  return state of serial control and status signals
3039  */
3040 static int tiocmget(struct tty_struct *tty, struct file *file)
3041 {
3042         struct slgt_info *info = tty->driver_data;
3043         unsigned int result;
3044         unsigned long flags;
3045
3046         spin_lock_irqsave(&info->lock,flags);
3047         get_signals(info);
3048         spin_unlock_irqrestore(&info->lock,flags);
3049
3050         result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3051                 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3052                 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3053                 ((info->signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
3054                 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3055                 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3056
3057         DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
3058         return result;
3059 }
3060
3061 /*
3062  * set modem control signals (DTR/RTS)
3063  *
3064  *      cmd     signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
3065  *              TIOCMSET = set/clear signal values
3066  *      value   bit mask for command
3067  */
3068 static int tiocmset(struct tty_struct *tty, struct file *file,
3069                     unsigned int set, unsigned int clear)
3070 {
3071         struct slgt_info *info = tty->driver_data;
3072         unsigned long flags;
3073
3074         DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
3075
3076         if (set & TIOCM_RTS)
3077                 info->signals |= SerialSignal_RTS;
3078         if (set & TIOCM_DTR)
3079                 info->signals |= SerialSignal_DTR;
3080         if (clear & TIOCM_RTS)
3081                 info->signals &= ~SerialSignal_RTS;
3082         if (clear & TIOCM_DTR)
3083                 info->signals &= ~SerialSignal_DTR;
3084
3085         spin_lock_irqsave(&info->lock,flags);
3086         set_signals(info);
3087         spin_unlock_irqrestore(&info->lock,flags);
3088         return 0;
3089 }
3090
3091 static int carrier_raised(struct tty_port *port)
3092 {
3093         unsigned long flags;
3094         struct slgt_info *info = container_of(port, struct slgt_info, port);
3095
3096         spin_lock_irqsave(&info->lock,flags);
3097         get_signals(info);
3098         spin_unlock_irqrestore(&info->lock,flags);
3099         return (info->signals & SerialSignal_DCD) ? 1 : 0;
3100 }
3101
3102 static void raise_dtr_rts(struct tty_port *port)
3103 {
3104         unsigned long flags;
3105         struct slgt_info *info = container_of(port, struct slgt_info, port);
3106
3107         spin_lock_irqsave(&info->lock,flags);
3108         info->signals |= SerialSignal_RTS + SerialSignal_DTR;
3109         set_signals(info);
3110         spin_unlock_irqrestore(&info->lock,flags);
3111 }
3112
3113
3114 /*
3115  *  block current process until the device is ready to open
3116  */
3117 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3118                            struct slgt_info *info)
3119 {
3120         DECLARE_WAITQUEUE(wait, current);
3121         int             retval;
3122         bool            do_clocal = false;
3123         bool            extra_count = false;
3124         unsigned long   flags;
3125         int             cd;
3126         struct tty_port *port = &info->port;
3127
3128         DBGINFO(("%s block_til_ready\n", tty->driver->name));
3129
3130         if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3131                 /* nonblock mode is set or port is not enabled */
3132                 port->flags |= ASYNC_NORMAL_ACTIVE;
3133                 return 0;
3134         }
3135
3136         if (tty->termios->c_cflag & CLOCAL)
3137                 do_clocal = true;
3138
3139         /* Wait for carrier detect and the line to become
3140          * free (i.e., not in use by the callout).  While we are in
3141          * this loop, port->count is dropped by one, so that
3142          * close() knows when to free things.  We restore it upon
3143          * exit, either normal or abnormal.
3144          */
3145
3146         retval = 0;
3147         add_wait_queue(&port->open_wait, &wait);
3148
3149         spin_lock_irqsave(&info->lock, flags);
3150         if (!tty_hung_up_p(filp)) {
3151                 extra_count = true;
3152                 port->count--;
3153         }
3154         spin_unlock_irqrestore(&info->lock, flags);
3155         port->blocked_open++;
3156
3157         while (1) {
3158                 if ((tty->termios->c_cflag & CBAUD))
3159                         tty_port_raise_dtr_rts(port);
3160
3161                 set_current_state(TASK_INTERRUPTIBLE);
3162
3163                 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3164                         retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3165                                         -EAGAIN : -ERESTARTSYS;
3166                         break;
3167                 }
3168
3169                 cd = tty_port_carrier_raised(port);
3170
3171                 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
3172                         break;
3173
3174                 if (signal_pending(current)) {
3175                         retval = -ERESTARTSYS;
3176                         break;
3177                 }
3178
3179                 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3180                 schedule();
3181         }
3182
3183         set_current_state(TASK_RUNNING);
3184         remove_wait_queue(&port->open_wait, &wait);
3185
3186         if (extra_count)
3187                 port->count++;
3188         port->blocked_open--;
3189
3190         if (!retval)
3191                 port->flags |= ASYNC_NORMAL_ACTIVE;
3192
3193         DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3194         return retval;
3195 }
3196
3197 static int alloc_tmp_rbuf(struct slgt_info *info)
3198 {
3199         info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3200         if (info->tmp_rbuf == NULL)
3201                 return -ENOMEM;
3202         return 0;
3203 }
3204
3205 static void free_tmp_rbuf(struct slgt_info *info)
3206 {
3207         kfree(info->tmp_rbuf);
3208         info->tmp_rbuf = NULL;
3209 }
3210
3211 /*
3212  * allocate DMA descriptor lists.
3213  */
3214 static int alloc_desc(struct slgt_info *info)
3215 {
3216         unsigned int i;
3217         unsigned int pbufs;
3218
3219         /* allocate memory to hold descriptor lists */
3220         info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
3221         if (info->bufs == NULL)
3222                 return -ENOMEM;
3223
3224         memset(info->bufs, 0, DESC_LIST_SIZE);
3225
3226         info->rbufs = (struct slgt_desc*)info->bufs;
3227         info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3228
3229         pbufs = (unsigned int)info->bufs_dma_addr;
3230
3231         /*
3232          * Build circular lists of descriptors
3233          */
3234
3235         for (i=0; i < info->rbuf_count; i++) {
3236                 /* physical address of this descriptor */
3237                 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3238
3239                 /* physical address of next descriptor */
3240                 if (i == info->rbuf_count - 1)
3241                         info->rbufs[i].next = cpu_to_le32(pbufs);
3242                 else
3243                         info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3244                 set_desc_count(info->rbufs[i], DMABUFSIZE);
3245         }
3246
3247         for (i=0; i < info->tbuf_count; i++) {
3248                 /* physical address of this descriptor */
3249                 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3250
3251                 /* physical address of next descriptor */
3252                 if (i == info->tbuf_count - 1)
3253                         info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3254                 else
3255                         info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3256         }
3257
3258         return 0;
3259 }
3260
3261 static void free_desc(struct slgt_info *info)
3262 {
3263         if (info->bufs != NULL) {
3264                 pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
3265                 info->bufs  = NULL;
3266                 info->rbufs = NULL;
3267                 info->tbufs = NULL;
3268         }
3269 }
3270
3271 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3272 {
3273         int i;
3274         for (i=0; i < count; i++) {
3275                 if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
3276                         return -ENOMEM;
3277                 bufs[i].pbuf  = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3278         }
3279         return 0;
3280 }
3281
3282 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3283 {
3284         int i;
3285         for (i=0; i < count; i++) {
3286                 if (bufs[i].buf == NULL)
3287                         continue;
3288                 pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
3289                 bufs[i].buf = NULL;
3290         }
3291 }
3292
3293 static int alloc_dma_bufs(struct slgt_info *info)
3294 {
3295         info->rbuf_count = 32;
3296         info->tbuf_count = 32;
3297
3298         if (alloc_desc(info) < 0 ||
3299             alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3300             alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3301             alloc_tmp_rbuf(info) < 0) {
3302                 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3303                 return -ENOMEM;
3304         }
3305         reset_rbufs(info);
3306         return 0;
3307 }
3308
3309 static void free_dma_bufs(struct slgt_info *info)
3310 {
3311         if (info->bufs) {
3312                 free_bufs(info, info->rbufs, info->rbuf_count);
3313                 free_bufs(info, info->tbufs, info->tbuf_count);
3314                 free_desc(info);
3315         }
3316         free_tmp_rbuf(info);
3317 }
3318
3319 static int claim_resources(struct slgt_info *info)
3320 {
3321         if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3322                 DBGERR(("%s reg addr conflict, addr=%08X\n",
3323                         info->device_name, info->phys_reg_addr));
3324                 info->init_error = DiagStatus_AddressConflict;
3325                 goto errout;
3326         }
3327         else
3328                 info->reg_addr_requested = true;
3329
3330         info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
3331         if (!info->reg_addr) {
3332                 DBGERR(("%s cant map device registers, addr=%08X\n",
3333                         info->device_name, info->phys_reg_addr));
3334                 info->init_error = DiagStatus_CantAssignPciResources;
3335                 goto errout;
3336         }
3337         return 0;
3338
3339 errout:
3340         release_resources(info);
3341         return -ENODEV;
3342 }
3343
3344 static void release_resources(struct slgt_info *info)
3345 {
3346         if (info->irq_requested) {
3347                 free_irq(info->irq_level, info);
3348                 info->irq_requested = false;
3349         }
3350
3351         if (info->reg_addr_requested) {
3352                 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3353                 info->reg_addr_requested = false;
3354         }
3355
3356         if (info->reg_addr) {
3357                 iounmap(info->reg_addr);
3358                 info->reg_addr = NULL;
3359         }
3360 }
3361
3362 /* Add the specified device instance data structure to the
3363  * global linked list of devices and increment the device count.
3364  */
3365 static void add_device(struct slgt_info *info)
3366 {
3367         char *devstr;
3368
3369         info->next_device = NULL;
3370         info->line = slgt_device_count;
3371         sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3372
3373         if (info->line < MAX_DEVICES) {
3374                 if (maxframe[info->line])
3375                         info->max_frame_size = maxframe[info->line];
3376         }
3377
3378         slgt_device_count++;
3379
3380         if (!slgt_device_list)
3381                 slgt_device_list = info;
3382         else {
3383                 struct slgt_info *current_dev = slgt_device_list;
3384                 while(current_dev->next_device)
3385                         current_dev = current_dev->next_device;
3386                 current_dev->next_device = info;
3387         }
3388
3389         if (info->max_frame_size < 4096)
3390                 info->max_frame_size = 4096;
3391         else if (info->max_frame_size > 65535)
3392                 info->max_frame_size = 65535;
3393
3394         switch(info->pdev->device) {
3395         case SYNCLINK_GT_DEVICE_ID:
3396                 devstr = "GT";
3397                 break;
3398         case SYNCLINK_GT2_DEVICE_ID:
3399                 devstr = "GT2";
3400                 break;
3401         case SYNCLINK_GT4_DEVICE_ID:
3402                 devstr = "GT4";
3403                 break;
3404         case SYNCLINK_AC_DEVICE_ID:
3405                 devstr = "AC";
3406                 info->params.mode = MGSL_MODE_ASYNC;
3407                 break;
3408         default:
3409                 devstr = "(unknown model)";
3410         }
3411         printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3412                 devstr, info->device_name, info->phys_reg_addr,
3413                 info->irq_level, info->max_frame_size);
3414
3415 #if SYNCLINK_GENERIC_HDLC
3416         hdlcdev_init(info);
3417 #endif
3418 }
3419
3420 static const struct tty_port_operations slgt_port_ops = {
3421         .carrier_raised = carrier_raised,
3422         .raise_dtr_rts = raise_dtr_rts,
3423 };
3424
3425 /*
3426  *  allocate device instance structure, return NULL on failure
3427  */
3428 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3429 {
3430         struct slgt_info *info;
3431
3432         info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
3433
3434         if (!info) {
3435                 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3436                         driver_name, adapter_num, port_num));
3437         } else {
3438                 tty_port_init(&info->port);
3439                 info->port.ops = &slgt_port_ops;
3440                 info->magic = MGSL_MAGIC;
3441                 INIT_WORK(&info->task, bh_handler);
3442                 info->max_frame_size = 4096;
3443                 info->base_clock = 14745600;
3444                 info->rbuf_fill_level = DMABUFSIZE;
3445                 info->port.close_delay = 5*HZ/10;
3446                 info->port.closing_wait = 30*HZ;
3447                 init_waitqueue_head(&info->status_event_wait_q);
3448                 init_waitqueue_head(&info->event_wait_q);
3449                 spin_lock_init(&info->netlock);
3450                 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3451                 info->idle_mode = HDLC_TXIDLE_FLAGS;
3452                 info->adapter_num = adapter_num;
3453                 info->port_num = port_num;
3454
3455                 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3456                 setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
3457
3458                 /* Copy configuration info to device instance data */
3459                 info->pdev = pdev;
3460                 info->irq_level = pdev->irq;
3461                 info->phys_reg_addr = pci_resource_start(pdev,0);
3462
3463                 info->bus_type = MGSL_BUS_TYPE_PCI;
3464                 info->irq_flags = IRQF_SHARED;
3465
3466                 info->init_error = -1; /* assume error, set to 0 on successful init */
3467         }
3468
3469         return info;
3470 }
3471
3472 static void device_init(int adapter_num, struct pci_dev *pdev)
3473 {
3474         struct slgt_info *port_array[SLGT_MAX_PORTS];
3475         int i;
3476         int port_count = 1;
3477
3478         if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3479                 port_count = 2;
3480         else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3481                 port_count = 4;
3482
3483         /* allocate device instances for all ports */
3484         for (i=0; i < port_count; ++i) {
3485                 port_array[i] = alloc_dev(adapter_num, i, pdev);
3486                 if (port_array[i] == NULL) {
3487                         for (--i; i >= 0; --i)
3488                                 kfree(port_array[i]);
3489                         return;
3490                 }
3491         }
3492
3493         /* give copy of port_array to all ports and add to device list  */
3494         for (i=0; i < port_count; ++i) {
3495                 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3496                 add_device(port_array[i]);
3497                 port_array[i]->port_count = port_count;
3498                 spin_lock_init(&port_array[i]->lock);
3499         }
3500
3501         /* Allocate and claim adapter resources */
3502         if (!claim_resources(port_array[0])) {
3503
3504                 alloc_dma_bufs(port_array[0]);
3505
3506                 /* copy resource information from first port to others */
3507                 for (i = 1; i < port_count; ++i) {
3508                         port_array[i]->lock      = port_array[0]->lock;
3509                         port_array[i]->irq_level = port_array[0]->irq_level;
3510                         port_array[i]->reg_addr  = port_array[0]->reg_addr;
3511                         alloc_dma_bufs(port_array[i]);
3512                 }
3513
3514                 if (request_irq(port_array[0]->irq_level,
3515                                         slgt_interrupt,
3516                                         port_array[0]->irq_flags,
3517                                         port_array[0]->device_name,
3518                                         port_array[0]) < 0) {
3519                         DBGERR(("%s request_irq failed IRQ=%d\n",
3520                                 port_array[0]->device_name,
3521                                 port_array[0]->irq_level));
3522                 } else {
3523                         port_array[0]->irq_requested = true;
3524                         adapter_test(port_array[0]);
3525                         for (i=1 ; i < port_count ; i++) {
3526                                 port_array[i]->init_error = port_array[0]->init_error;
3527                                 port_array[i]->gpio_present = port_array[0]->gpio_present;
3528                         }
3529                 }
3530         }
3531
3532         for (i=0; i < port_count; ++i)
3533                 tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
3534 }
3535
3536 static int __devinit init_one(struct pci_dev *dev,
3537                               const struct pci_device_id *ent)
3538 {
3539         if (pci_enable_device(dev)) {
3540                 printk("error enabling pci device %p\n", dev);
3541                 return -EIO;
3542         }
3543         pci_set_master(dev);
3544         device_init(slgt_device_count, dev);
3545         return 0;
3546 }
3547
3548 static void __devexit remove_one(struct pci_dev *dev)
3549 {
3550 }
3551
3552 static const struct tty_operations ops = {
3553         .open = open,
3554         .close = close,
3555         .write = write,
3556         .put_char = put_char,
3557         .flush_chars = flush_chars,
3558         .write_room = write_room,
3559         .chars_in_buffer = chars_in_buffer,
3560         .flush_buffer = flush_buffer,
3561         .ioctl = ioctl,
3562         .compat_ioctl = slgt_compat_ioctl,
3563         .throttle = throttle,
3564         .unthrottle = unthrottle,
3565         .send_xchar = send_xchar,
3566         .break_ctl = set_break,
3567         .wait_until_sent = wait_until_sent,
3568         .set_termios = set_termios,
3569         .stop = tx_hold,
3570         .start = tx_release,
3571         .hangup = hangup,
3572         .tiocmget = tiocmget,
3573         .tiocmset = tiocmset,
3574         .proc_fops = &synclink_gt_proc_fops,
3575 };
3576
3577 static void slgt_cleanup(void)
3578 {
3579         int rc;
3580         struct slgt_info *info;
3581         struct slgt_info *tmp;
3582
3583         printk(KERN_INFO "unload %s\n", driver_name);
3584
3585         if (serial_driver) {
3586                 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
3587                         tty_unregister_device(serial_driver, info->line);
3588                 if ((rc = tty_unregister_driver(serial_driver)))
3589                         DBGERR(("tty_unregister_driver error=%d\n", rc));
3590                 put_tty_driver(serial_driver);
3591         }
3592
3593         /* reset devices */
3594         info = slgt_device_list;
3595         while(info) {
3596                 reset_port(info);
3597                 info = info->next_device;
3598         }
3599
3600         /* release devices */
3601         info = slgt_device_list;
3602         while(info) {
3603 #if SYNCLINK_GENERIC_HDLC
3604                 hdlcdev_exit(info);
3605 #endif
3606                 free_dma_bufs(info);
3607                 free_tmp_rbuf(info);
3608                 if (info->port_num == 0)
3609                         release_resources(info);
3610                 tmp = info;
3611                 info = info->next_device;
3612                 kfree(tmp);
3613         }
3614
3615         if (pci_registered)
3616                 pci_unregister_driver(&pci_driver);
3617 }
3618
3619 /*
3620  *  Driver initialization entry point.
3621  */
3622 static int __init slgt_init(void)
3623 {
3624         int rc;
3625
3626         printk(KERN_INFO "%s\n", driver_name);
3627
3628         serial_driver = alloc_tty_driver(MAX_DEVICES);
3629         if (!serial_driver) {
3630                 printk("%s can't allocate tty driver\n", driver_name);
3631                 return -ENOMEM;
3632         }
3633
3634         /* Initialize the tty_driver structure */
3635
3636         serial_driver->owner = THIS_MODULE;
3637         serial_driver->driver_name = tty_driver_name;
3638         serial_driver->name = tty_dev_prefix;
3639         serial_driver->major = ttymajor;
3640         serial_driver->minor_start = 64;
3641         serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3642         serial_driver->subtype = SERIAL_TYPE_NORMAL;
3643         serial_driver->init_termios = tty_std_termios;
3644         serial_driver->init_termios.c_cflag =
3645                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3646         serial_driver->init_termios.c_ispeed = 9600;
3647         serial_driver->init_termios.c_ospeed = 9600;
3648         serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3649         tty_set_operations(serial_driver, &ops);
3650         if ((rc = tty_register_driver(serial_driver)) < 0) {
3651                 DBGERR(("%s can't register serial driver\n", driver_name));
3652                 put_tty_driver(serial_driver);
3653                 serial_driver = NULL;
3654                 goto error;
3655         }
3656
3657         printk(KERN_INFO "%s, tty major#%d\n",
3658                driver_name, serial_driver->major);
3659
3660         slgt_device_count = 0;
3661         if ((rc = pci_register_driver(&pci_driver)) < 0) {
3662                 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3663                 goto error;
3664         }
3665         pci_registered = true;
3666
3667         if (!slgt_device_list)
3668                 printk("%s no devices found\n",driver_name);
3669
3670         return 0;
3671
3672 error:
3673         slgt_cleanup();
3674         return rc;
3675 }
3676
3677 static void __exit slgt_exit(void)
3678 {
3679         slgt_cleanup();
3680 }
3681
3682 module_init(slgt_init);
3683 module_exit(slgt_exit);
3684
3685 /*
3686  * register access routines
3687  */
3688
3689 #define CALC_REGADDR() \
3690         unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3691         if (addr >= 0x80) \
3692                 reg_addr += (info->port_num) * 32;
3693
3694 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3695 {
3696         CALC_REGADDR();
3697         return readb((void __iomem *)reg_addr);
3698 }
3699
3700 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3701 {
3702         CALC_REGADDR();
3703         writeb(value, (void __iomem *)reg_addr);
3704 }
3705
3706 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3707 {
3708         CALC_REGADDR();
3709         return readw((void __iomem *)reg_addr);
3710 }
3711
3712 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3713 {
3714         CALC_REGADDR();
3715         writew(value, (void __iomem *)reg_addr);
3716 }
3717
3718 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3719 {
3720         CALC_REGADDR();
3721         return readl((void __iomem *)reg_addr);
3722 }
3723
3724 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3725 {
3726         CALC_REGADDR();
3727         writel(value, (void __iomem *)reg_addr);
3728 }
3729
3730 static void rdma_reset(struct slgt_info *info)
3731 {
3732         unsigned int i;
3733
3734         /* set reset bit */
3735         wr_reg32(info, RDCSR, BIT1);
3736
3737         /* wait for enable bit cleared */
3738         for(i=0 ; i < 1000 ; i++)
3739                 if (!(rd_reg32(info, RDCSR) & BIT0))
3740                         break;
3741 }
3742
3743 static void tdma_reset(struct slgt_info *info)
3744 {
3745         unsigned int i;
3746
3747         /* set reset bit */
3748         wr_reg32(info, TDCSR, BIT1);
3749
3750         /* wait for enable bit cleared */
3751         for(i=0 ; i < 1000 ; i++)
3752                 if (!(rd_reg32(info, TDCSR) & BIT0))
3753                         break;
3754 }
3755
3756 /*
3757  * enable internal loopback
3758  * TxCLK and RxCLK are generated from BRG
3759  * and TxD is looped back to RxD internally.
3760  */
3761 static void enable_loopback(struct slgt_info *info)
3762 {
3763         /* SCR (serial control) BIT2=looopback enable */
3764         wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3765
3766         if (info->params.mode != MGSL_MODE_ASYNC) {
3767                 /* CCR (clock control)
3768                  * 07..05  tx clock source (010 = BRG)
3769                  * 04..02  rx clock source (010 = BRG)
3770                  * 01      auxclk enable   (0 = disable)
3771                  * 00      BRG enable      (1 = enable)
3772                  *
3773                  * 0100 1001
3774                  */
3775                 wr_reg8(info, CCR, 0x49);
3776
3777                 /* set speed if available, otherwise use default */
3778                 if (info->params.clock_speed)
3779                         set_rate(info, info->params.clock_speed);
3780                 else
3781                         set_rate(info, 3686400);
3782         }
3783 }
3784
3785 /*
3786  *  set baud rate generator to specified rate
3787  */
3788 static void set_rate(struct slgt_info *info, u32 rate)
3789 {
3790         unsigned int div;
3791         unsigned int osc = info->base_clock;
3792
3793         /* div = osc/rate - 1
3794          *
3795          * Round div up if osc/rate is not integer to
3796          * force to next slowest rate.
3797          */
3798
3799         if (rate) {
3800                 div = osc/rate;
3801                 if (!(osc % rate) && div)
3802                         div--;
3803                 wr_reg16(info, BDR, (unsigned short)div);
3804         }
3805 }
3806
3807 static void rx_stop(struct slgt_info *info)
3808 {
3809         unsigned short val;
3810
3811         /* disable and reset receiver */
3812         val = rd_reg16(info, RCR) & ~BIT1;          /* clear enable bit */
3813         wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3814         wr_reg16(info, RCR, val);                  /* clear reset bit */
3815
3816         slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3817
3818         /* clear pending rx interrupts */
3819         wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3820
3821         rdma_reset(info);
3822
3823         info->rx_enabled = false;
3824         info->rx_restart = false;
3825 }
3826
3827 static void rx_start(struct slgt_info *info)
3828 {
3829         unsigned short val;
3830
3831         slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3832
3833         /* clear pending rx overrun IRQ */
3834         wr_reg16(info, SSR, IRQ_RXOVER);
3835
3836         /* reset and disable receiver */
3837         val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3838         wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3839         wr_reg16(info, RCR, val);                  /* clear reset bit */
3840
3841         rdma_reset(info);
3842         reset_rbufs(info);
3843
3844         /* set 1st descriptor address */
3845         wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
3846
3847         if (info->params.mode != MGSL_MODE_ASYNC) {
3848                 /* enable rx DMA and DMA interrupt */
3849                 wr_reg32(info, RDCSR, (BIT2 + BIT0));
3850         } else {
3851                 /* enable saving of rx status, rx DMA and DMA interrupt */
3852                 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
3853         }
3854
3855         slgt_irq_on(info, IRQ_RXOVER);
3856
3857         /* enable receiver */
3858         wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
3859
3860         info->rx_restart = false;
3861         info->rx_enabled = true;
3862 }
3863
3864 static void tx_start(struct slgt_info *info)
3865 {
3866         if (!info->tx_enabled) {
3867                 wr_reg16(info, TCR,
3868                          (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
3869                 info->tx_enabled = true;
3870         }
3871
3872         if (info->tx_count) {
3873                 info->drop_rts_on_tx_done = false;
3874
3875                 if (info->params.mode != MGSL_MODE_ASYNC) {
3876                         if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3877                                 get_signals(info);
3878                                 if (!(info->signals & SerialSignal_RTS)) {
3879                                         info->signals |= SerialSignal_RTS;
3880                                         set_signals(info);
3881                                         info->drop_rts_on_tx_done = true;
3882                                 }
3883                         }
3884
3885                         slgt_irq_off(info, IRQ_TXDATA);
3886                         slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
3887                         /* clear tx idle and underrun status bits */
3888                         wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3889                         if (info->params.mode == MGSL_MODE_HDLC)
3890                                 mod_timer(&info->tx_timer, jiffies +
3891                                                 msecs_to_jiffies(5000));
3892                 } else {
3893                         slgt_irq_off(info, IRQ_TXDATA);
3894                         slgt_irq_on(info, IRQ_TXIDLE);
3895                         /* clear tx idle status bit */
3896                         wr_reg16(info, SSR, IRQ_TXIDLE);
3897                 }
3898                 tdma_start(info);
3899                 info->tx_active = true;
3900         }
3901 }
3902
3903 /*
3904  * start transmit DMA if inactive and there are unsent buffers
3905  */
3906 static void tdma_start(struct slgt_info *info)
3907 {
3908         unsigned int i;
3909
3910         if (rd_reg32(info, TDCSR) & BIT0)
3911                 return;
3912
3913         /* transmit DMA inactive, check for unsent buffers */
3914         i = info->tbuf_start;
3915         while (!desc_count(info->tbufs[i])) {
3916                 if (++i == info->tbuf_count)
3917                         i = 0;
3918                 if (i == info->tbuf_current)
3919                         return;
3920         }
3921         info->tbuf_start = i;
3922
3923         /* there are unsent buffers, start transmit DMA */
3924
3925         /* reset needed if previous error condition */
3926         tdma_reset(info);
3927
3928         /* set 1st descriptor address */
3929         wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
3930         wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
3931 }
3932
3933 static void tx_stop(struct slgt_info *info)
3934 {
3935         unsigned short val;
3936
3937         del_timer(&info->tx_timer);
3938
3939         tdma_reset(info);
3940
3941         /* reset and disable transmitter */
3942         val = rd_reg16(info, TCR) & ~BIT1;          /* clear enable bit */
3943         wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
3944
3945         slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
3946
3947         /* clear tx idle and underrun status bit */
3948         wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3949
3950         reset_tbufs(info);
3951
3952         info->tx_enabled = false;
3953         info->tx_active = false;
3954 }
3955
3956 static void reset_port(struct slgt_info *info)
3957 {
3958         if (!info->reg_addr)
3959                 return;
3960
3961         tx_stop(info);
3962         rx_stop(info);
3963
3964         info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
3965         set_signals(info);
3966
3967         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3968 }
3969
3970 static void reset_adapter(struct slgt_info *info)
3971 {
3972         int i;
3973         for (i=0; i < info->port_count; ++i) {
3974                 if (info->port_array[i])
3975                         reset_port(info->port_array[i]);
3976         }
3977 }
3978
3979 static void async_mode(struct slgt_info *info)
3980 {
3981         unsigned short val;
3982
3983         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3984         tx_stop(info);
3985         rx_stop(info);
3986
3987         /* TCR (tx control)
3988          *
3989          * 15..13  mode, 010=async
3990          * 12..10  encoding, 000=NRZ
3991          * 09      parity enable
3992          * 08      1=odd parity, 0=even parity
3993          * 07      1=RTS driver control
3994          * 06      1=break enable
3995          * 05..04  character length
3996          *         00=5 bits
3997          *         01=6 bits
3998          *         10=7 bits
3999          *         11=8 bits
4000          * 03      0=1 stop bit, 1=2 stop bits
4001          * 02      reset
4002          * 01      enable
4003          * 00      auto-CTS enable
4004          */
4005         val = 0x4000;
4006
4007         if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4008                 val |= BIT7;
4009
4010         if (info->params.parity != ASYNC_PARITY_NONE) {
4011                 val |= BIT9;
4012                 if (info->params.parity == ASYNC_PARITY_ODD)
4013                         val |= BIT8;
4014         }
4015
4016         switch (info->params.data_bits)
4017         {
4018         case 6: val |= BIT4; break;
4019         case 7: val |= BIT5; break;
4020         case 8: val |= BIT5 + BIT4; break;
4021         }
4022
4023         if (info->params.stop_bits != 1)
4024                 val |= BIT3;
4025
4026         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4027                 val |= BIT0;
4028
4029         wr_reg16(info, TCR, val);
4030
4031         /* RCR (rx control)
4032          *
4033          * 15..13  mode, 010=async
4034          * 12..10  encoding, 000=NRZ
4035          * 09      parity enable
4036          * 08      1=odd parity, 0=even parity
4037          * 07..06  reserved, must be 0
4038          * 05..04  character length
4039          *         00=5 bits
4040          *         01=6 bits
4041          *         10=7 bits
4042          *         11=8 bits
4043          * 03      reserved, must be zero
4044          * 02      reset
4045          * 01      enable
4046          * 00      auto-DCD enable
4047          */
4048         val = 0x4000;
4049
4050         if (info->params.parity != ASYNC_PARITY_NONE) {
4051                 val |= BIT9;
4052                 if (info->params.parity == ASYNC_PARITY_ODD)
4053                         val |= BIT8;
4054         }
4055
4056         switch (info->params.data_bits)
4057         {
4058         case 6: val |= BIT4; break;
4059         case 7: val |= BIT5; break;
4060         case 8: val |= BIT5 + BIT4; break;
4061         }
4062
4063         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4064                 val |= BIT0;
4065
4066         wr_reg16(info, RCR, val);
4067
4068         /* CCR (clock control)
4069          *
4070          * 07..05  011 = tx clock source is BRG/16
4071          * 04..02  010 = rx clock source is BRG
4072          * 01      0 = auxclk disabled
4073          * 00      1 = BRG enabled
4074          *
4075          * 0110 1001
4076          */
4077         wr_reg8(info, CCR, 0x69);
4078
4079         msc_set_vcr(info);
4080
4081         /* SCR (serial control)
4082          *
4083          * 15  1=tx req on FIFO half empty
4084          * 14  1=rx req on FIFO half full
4085          * 13  tx data  IRQ enable
4086          * 12  tx idle  IRQ enable
4087          * 11  rx break on IRQ enable
4088          * 10  rx data  IRQ enable
4089          * 09  rx break off IRQ enable
4090          * 08  overrun  IRQ enable
4091          * 07  DSR      IRQ enable
4092          * 06  CTS      IRQ enable
4093          * 05  DCD      IRQ enable
4094          * 04  RI       IRQ enable
4095          * 03  0=16x sampling, 1=8x sampling
4096          * 02  1=txd->rxd internal loopback enable
4097          * 01  reserved, must be zero
4098          * 00  1=master IRQ enable
4099          */
4100         val = BIT15 + BIT14 + BIT0;
4101         /* JCR[8] : 1 = x8 async mode feature available */
4102         if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate &&
4103             ((info->base_clock < (info->params.data_rate * 16)) ||
4104              (info->base_clock % (info->params.data_rate * 16)))) {
4105                 /* use 8x sampling */
4106                 val |= BIT3;
4107                 set_rate(info, info->params.data_rate * 8);
4108         } else {
4109                 /* use 16x sampling */
4110                 set_rate(info, info->params.data_rate * 16);
4111         }
4112         wr_reg16(info, SCR, val);
4113
4114         slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
4115
4116         if (info->params.loopback)
4117                 enable_loopback(info);
4118 }
4119
4120 static void sync_mode(struct slgt_info *info)
4121 {
4122         unsigned short val;
4123
4124         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4125         tx_stop(info);
4126         rx_stop(info);
4127
4128         /* TCR (tx control)
4129          *
4130          * 15..13  mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4131          * 12..10  encoding
4132          * 09      CRC enable
4133          * 08      CRC32
4134          * 07      1=RTS driver control
4135          * 06      preamble enable
4136          * 05..04  preamble length
4137          * 03      share open/close flag
4138          * 02      reset
4139          * 01      enable
4140          * 00      auto-CTS enable
4141          */
4142         val = BIT2;
4143
4144         switch(info->params.mode) {
4145         case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4146         case MGSL_MODE_BISYNC:   val |= BIT15; break;
4147         case MGSL_MODE_RAW:      val |= BIT13; break;
4148         }
4149         if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4150                 val |= BIT7;
4151
4152         switch(info->params.encoding)
4153         {
4154         case HDLC_ENCODING_NRZB:          val |= BIT10; break;
4155         case HDLC_ENCODING_NRZI_MARK:     val |= BIT11; break;
4156         case HDLC_ENCODING_NRZI:          val |= BIT11 + BIT10; break;
4157         case HDLC_ENCODING_BIPHASE_MARK:  val |= BIT12; break;
4158         case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4159         case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4160         case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4161         }
4162
4163         switch (info->params.crc_type & HDLC_CRC_MASK)
4164         {
4165         case HDLC_CRC_16_CCITT: val |= BIT9; break;
4166         case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4167         }
4168
4169         if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4170                 val |= BIT6;
4171
4172         switch (info->params.preamble_length)
4173         {
4174         case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4175         case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4176         case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4177         }
4178
4179         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4180                 val |= BIT0;
4181
4182         wr_reg16(info, TCR, val);
4183
4184         /* TPR (transmit preamble) */
4185
4186         switch (info->params.preamble)
4187         {
4188         case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4189         case HDLC_PREAMBLE_PATTERN_ONES:  val = 0xff; break;
4190         case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4191         case HDLC_PREAMBLE_PATTERN_10:    val = 0x55; break;
4192         case HDLC_PREAMBLE_PATTERN_01:    val = 0xaa; break;
4193         default:                          val = 0x7e; break;
4194         }
4195         wr_reg8(info, TPR, (unsigned char)val);
4196
4197         /* RCR (rx control)
4198          *
4199          * 15..13  mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4200          * 12..10  encoding
4201          * 09      CRC enable
4202          * 08      CRC32
4203          * 07..03  reserved, must be 0
4204          * 02      reset
4205          * 01      enable
4206          * 00      auto-DCD enable
4207          */
4208         val = 0;
4209
4210         switch(info->params.mode) {
4211         case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4212         case MGSL_MODE_BISYNC:   val |= BIT15; break;
4213         case MGSL_MODE_RAW:      val |= BIT13; break;
4214         }
4215
4216         switch(info->params.encoding)
4217         {
4218         case HDLC_ENCODING_NRZB:          val |= BIT10; break;
4219         case HDLC_ENCODING_NRZI_MARK:     val |= BIT11; break;
4220         case HDLC_ENCODING_NRZI:          val |= BIT11 + BIT10; break;
4221         case HDLC_ENCODING_BIPHASE_MARK:  val |= BIT12; break;
4222         case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4223         case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4224         case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4225         }
4226
4227         switch (info->params.crc_type & HDLC_CRC_MASK)
4228         {
4229         case HDLC_CRC_16_CCITT: val |= BIT9; break;
4230         case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4231         }
4232
4233         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4234                 val |= BIT0;
4235
4236         wr_reg16(info, RCR, val);
4237
4238         /* CCR (clock control)
4239          *
4240          * 07..05  tx clock source
4241          * 04..02  rx clock source
4242          * 01      auxclk enable
4243          * 00      BRG enable
4244          */
4245         val = 0;
4246
4247         if (info->params.flags & HDLC_FLAG_TXC_BRG)
4248         {
4249                 // when RxC source is DPLL, BRG generates 16X DPLL
4250                 // reference clock, so take TxC from BRG/16 to get
4251                 // transmit clock at actual data rate
4252                 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4253                         val |= BIT6 + BIT5;     /* 011, txclk = BRG/16 */
4254                 else
4255                         val |= BIT6;    /* 010, txclk = BRG */
4256         }
4257         else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4258                 val |= BIT7;    /* 100, txclk = DPLL Input */
4259         else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4260                 val |= BIT5;    /* 001, txclk = RXC Input */
4261
4262         if (info->params.flags & HDLC_FLAG_RXC_BRG)
4263                 val |= BIT3;    /* 010, rxclk = BRG */
4264         else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4265                 val |= BIT4;    /* 100, rxclk = DPLL */
4266         else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4267                 val |= BIT2;    /* 001, rxclk = TXC Input */
4268
4269         if (info->params.clock_speed)
4270                 val |= BIT1 + BIT0;
4271
4272         wr_reg8(info, CCR, (unsigned char)val);
4273
4274         if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4275         {
4276                 // program DPLL mode
4277                 switch(info->params.encoding)
4278                 {
4279                 case HDLC_ENCODING_BIPHASE_MARK:
4280                 case HDLC_ENCODING_BIPHASE_SPACE:
4281                         val = BIT7; break;
4282                 case HDLC_ENCODING_BIPHASE_LEVEL:
4283                 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4284                         val = BIT7 + BIT6; break;
4285                 default: val = BIT6;    // NRZ encodings
4286                 }
4287                 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4288
4289                 // DPLL requires a 16X reference clock from BRG
4290                 set_rate(info, info->params.clock_speed * 16);
4291         }
4292         else
4293                 set_rate(info, info->params.clock_speed);
4294
4295         tx_set_idle(info);
4296
4297         msc_set_vcr(info);
4298
4299         /* SCR (serial control)
4300          *
4301          * 15  1=tx req on FIFO half empty
4302          * 14  1=rx req on FIFO half full
4303          * 13  tx data  IRQ enable
4304          * 12  tx idle  IRQ enable
4305          * 11  underrun IRQ enable
4306          * 10  rx data  IRQ enable
4307          * 09  rx idle  IRQ enable
4308          * 08  overrun  IRQ enable
4309          * 07  DSR      IRQ enable
4310          * 06  CTS      IRQ enable
4311          * 05  DCD      IRQ enable
4312          * 04  RI       IRQ enable
4313          * 03  reserved, must be zero
4314          * 02  1=txd->rxd internal loopback enable
4315          * 01  reserved, must be zero
4316          * 00  1=master IRQ enable
4317          */
4318         wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4319
4320         if (info->params.loopback)
4321                 enable_loopback(info);
4322 }
4323
4324 /*
4325  *  set transmit idle mode
4326  */
4327 static void tx_set_idle(struct slgt_info *info)
4328 {
4329         unsigned char val;
4330         unsigned short tcr;
4331
4332         /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4333          * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4334          */
4335         tcr = rd_reg16(info, TCR);
4336         if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4337                 /* disable preamble, set idle size to 16 bits */
4338                 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4339                 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4340                 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4341         } else if (!(tcr & BIT6)) {
4342                 /* preamble is disabled, set idle size to 8 bits */
4343                 tcr &= ~(BIT5 + BIT4);
4344         }
4345         wr_reg16(info, TCR, tcr);
4346
4347         if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4348                 /* LSB of custom tx idle specified in tx idle register */
4349                 val = (unsigned char)(info->idle_mode & 0xff);
4350         } else {
4351                 /* standard 8 bit idle patterns */
4352                 switch(info->idle_mode)
4353                 {
4354                 case HDLC_TXIDLE_FLAGS:          val = 0x7e; break;
4355                 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4356                 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4357                 case HDLC_TXIDLE_ZEROS:
4358                 case HDLC_TXIDLE_SPACE:          val = 0x00; break;
4359                 default:                         val = 0xff;
4360                 }
4361         }
4362
4363         wr_reg8(info, TIR, val);
4364 }
4365
4366 /*
4367  * get state of V24 status (input) signals
4368  */
4369 static void get_signals(struct slgt_info *info)
4370 {
4371         unsigned short status = rd_reg16(info, SSR);
4372
4373         /* clear all serial signals except DTR and RTS */
4374         info->signals &= SerialSignal_DTR + SerialSignal_RTS;
4375
4376         if (status & BIT3)
4377                 info->signals |= SerialSignal_DSR;
4378         if (status & BIT2)
4379                 info->signals |= SerialSignal_CTS;
4380         if (status & BIT1)
4381                 info->signals |= SerialSignal_DCD;
4382         if (status & BIT0)
4383                 info->signals |= SerialSignal_RI;
4384 }
4385
4386 /*
4387  * set V.24 Control Register based on current configuration
4388  */
4389 static void msc_set_vcr(struct slgt_info *info)
4390 {
4391         unsigned char val = 0;
4392
4393         /* VCR (V.24 control)
4394          *
4395          * 07..04  serial IF select
4396          * 03      DTR
4397          * 02      RTS
4398          * 01      LL
4399          * 00      RL
4400          */
4401
4402         switch(info->if_mode & MGSL_INTERFACE_MASK)
4403         {
4404         case MGSL_INTERFACE_RS232:
4405                 val |= BIT5; /* 0010 */
4406                 break;
4407         case MGSL_INTERFACE_V35:
4408                 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4409                 break;
4410         case MGSL_INTERFACE_RS422:
4411                 val |= BIT6; /* 0100 */
4412                 break;
4413         }
4414
4415         if (info->if_mode & MGSL_INTERFACE_MSB_FIRST)
4416                 val |= BIT4;
4417         if (info->signals & SerialSignal_DTR)
4418                 val |= BIT3;
4419         if (info->signals & SerialSignal_RTS)
4420                 val |= BIT2;
4421         if (info->if_mode & MGSL_INTERFACE_LL)
4422                 val |= BIT1;
4423         if (info->if_mode & MGSL_INTERFACE_RL)
4424                 val |= BIT0;
4425         wr_reg8(info, VCR, val);
4426 }
4427
4428 /*
4429  * set state of V24 control (output) signals
4430  */
4431 static void set_signals(struct slgt_info *info)
4432 {
4433         unsigned char val = rd_reg8(info, VCR);
4434         if (info->signals & SerialSignal_DTR)
4435                 val |= BIT3;
4436         else
4437                 val &= ~BIT3;
4438         if (info->signals & SerialSignal_RTS)
4439                 val |= BIT2;
4440         else
4441                 val &= ~BIT2;
4442         wr_reg8(info, VCR, val);
4443 }
4444
4445 /*
4446  * free range of receive DMA buffers (i to last)
4447  */
4448 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4449 {
4450         int done = 0;
4451
4452         while(!done) {
4453                 /* reset current buffer for reuse */
4454                 info->rbufs[i].status = 0;
4455                 set_desc_count(info->rbufs[i], info->rbuf_fill_level);
4456                 if (i == last)
4457                         done = 1;
4458                 if (++i == info->rbuf_count)
4459                         i = 0;
4460         }
4461         info->rbuf_current = i;
4462 }
4463
4464 /*
4465  * mark all receive DMA buffers as free
4466  */
4467 static void reset_rbufs(struct slgt_info *info)
4468 {
4469         free_rbufs(info, 0, info->rbuf_count - 1);
4470 }
4471
4472 /*
4473  * pass receive HDLC frame to upper layer
4474  *
4475  * return true if frame available, otherwise false
4476  */
4477 static bool rx_get_frame(struct slgt_info *info)
4478 {
4479         unsigned int start, end;
4480         unsigned short status;
4481         unsigned int framesize = 0;
4482         unsigned long flags;
4483         struct tty_struct *tty = info->port.tty;
4484         unsigned char addr_field = 0xff;
4485         unsigned int crc_size = 0;
4486
4487         switch (info->params.crc_type & HDLC_CRC_MASK) {
4488         case HDLC_CRC_16_CCITT: crc_size = 2; break;
4489         case HDLC_CRC_32_CCITT: crc_size = 4; break;
4490         }
4491
4492 check_again:
4493
4494         framesize = 0;
4495         addr_field = 0xff;
4496         start = end = info->rbuf_current;
4497
4498         for (;;) {
4499                 if (!desc_complete(info->rbufs[end]))
4500                         goto cleanup;
4501
4502                 if (framesize == 0 && info->params.addr_filter != 0xff)
4503                         addr_field = info->rbufs[end].buf[0];
4504
4505                 framesize += desc_count(info->rbufs[end]);
4506
4507                 if (desc_eof(info->rbufs[end]))
4508                         break;
4509
4510                 if (++end == info->rbuf_count)
4511                         end = 0;
4512
4513                 if (end == info->rbuf_current) {
4514                         if (info->rx_enabled){
4515                                 spin_lock_irqsave(&info->lock,flags);
4516                                 rx_start(info);
4517                                 spin_unlock_irqrestore(&info->lock,flags);
4518                         }
4519                         goto cleanup;
4520                 }
4521         }
4522
4523         /* status
4524          *
4525          * 15      buffer complete
4526          * 14..06  reserved
4527          * 05..04  residue
4528          * 02      eof (end of frame)
4529          * 01      CRC error
4530          * 00      abort
4531          */
4532         status = desc_status(info->rbufs[end]);
4533
4534         /* ignore CRC bit if not using CRC (bit is undefined) */
4535         if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4536                 status &= ~BIT1;
4537
4538         if (framesize == 0 ||
4539                  (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4540                 free_rbufs(info, start, end);
4541                 goto check_again;
4542         }
4543
4544         if (framesize < (2 + crc_size) || status & BIT0) {
4545                 info->icount.rxshort++;
4546                 framesize = 0;
4547         } else if (status & BIT1) {
4548                 info->icount.rxcrc++;
4549                 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4550                         framesize = 0;
4551         }
4552
4553 #if SYNCLINK_GENERIC_HDLC
4554         if (framesize == 0) {
4555                 info->netdev->stats.rx_errors++;
4556                 info->netdev->stats.rx_frame_errors++;
4557         }
4558 #endif
4559
4560         DBGBH(("%s rx frame status=%04X size=%d\n",
4561                 info->device_name, status, framesize));
4562         DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx");
4563
4564         if (framesize) {
4565                 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4566                         framesize -= crc_size;
4567                         crc_size = 0;
4568                 }
4569
4570                 if (framesize > info->max_frame_size + crc_size)
4571                         info->icount.rxlong++;
4572                 else {
4573                         /* copy dma buffer(s) to contiguous temp buffer */
4574                         int copy_count = framesize;
4575                         int i = start;
4576                         unsigned char *p = info->tmp_rbuf;
4577                         info->tmp_rbuf_count = framesize;
4578
4579                         info->icount.rxok++;
4580
4581                         while(copy_count) {
4582                                 int partial_count = min_t(int, copy_count, info->rbuf_fill_level);
4583                                 memcpy(p, info->rbufs[i].buf, partial_count);
4584                                 p += partial_count;
4585                                 copy_count -= partial_count;
4586                                 if (++i == info->rbuf_count)
4587                                         i = 0;
4588                         }
4589
4590                         if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4591                                 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4592                                 framesize++;
4593                         }
4594
4595 #if SYNCLINK_GENERIC_HDLC
4596                         if (info->netcount)
4597                                 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4598                         else
4599 #endif
4600                                 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4601                 }
4602         }
4603         free_rbufs(info, start, end);
4604         return true;
4605
4606 cleanup:
4607         return false;
4608 }
4609
4610 /*
4611  * pass receive buffer (RAW synchronous mode) to tty layer
4612  * return true if buffer available, otherwise false
4613  */
4614 static bool rx_get_buf(struct slgt_info *info)
4615 {
4616         unsigned int i = info->rbuf_current;
4617         unsigned int count;
4618
4619         if (!desc_complete(info->rbufs[i]))
4620                 return false;
4621         count = desc_count(info->rbufs[i]);
4622         switch(info->params.mode) {
4623         case MGSL_MODE_MONOSYNC:
4624         case MGSL_MODE_BISYNC:
4625                 /* ignore residue in byte synchronous modes */
4626                 if (desc_residue(info->rbufs[i]))
4627                         count--;
4628                 break;
4629         }
4630         DBGDATA(info, info->rbufs[i].buf, count, "rx");
4631         DBGINFO(("rx_get_buf size=%d\n", count));
4632         if (count)
4633                 ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
4634                                   info->flag_buf, count);
4635         free_rbufs(info, i, i);
4636         return true;
4637 }
4638
4639 static void reset_tbufs(struct slgt_info *info)
4640 {
4641         unsigned int i;
4642         info->tbuf_current = 0;
4643         for (i=0 ; i < info->tbuf_count ; i++) {
4644                 info->tbufs[i].status = 0;
4645                 info->tbufs[i].count  = 0;
4646         }
4647 }
4648
4649 /*
4650  * return number of free transmit DMA buffers
4651  */
4652 static unsigned int free_tbuf_count(struct slgt_info *info)
4653 {
4654         unsigned int count = 0;
4655         unsigned int i = info->tbuf_current;
4656
4657         do
4658         {
4659                 if (desc_count(info->tbufs[i]))
4660                         break; /* buffer in use */
4661                 ++count;
4662                 if (++i == info->tbuf_count)
4663                         i=0;
4664         } while (i != info->tbuf_current);
4665
4666         /* if tx DMA active, last zero count buffer is in use */
4667         if (count && (rd_reg32(info, TDCSR) & BIT0))
4668                 --count;
4669
4670         return count;
4671 }
4672
4673 /*
4674  * return number of bytes in unsent transmit DMA buffers
4675  * and the serial controller tx FIFO
4676  */
4677 static unsigned int tbuf_bytes(struct slgt_info *info)
4678 {
4679         unsigned int total_count = 0;
4680         unsigned int i = info->tbuf_current;
4681         unsigned int reg_value;
4682         unsigned int count;
4683         unsigned int active_buf_count = 0;
4684
4685         /*
4686          * Add descriptor counts for all tx DMA buffers.
4687          * If count is zero (cleared by DMA controller after read),
4688          * the buffer is complete or is actively being read from.
4689          *
4690          * Record buf_count of last buffer with zero count starting
4691          * from current ring position. buf_count is mirror
4692          * copy of count and is not cleared by serial controller.
4693          * If DMA controller is active, that buffer is actively
4694          * being read so add to total.
4695          */
4696         do {
4697                 count = desc_count(info->tbufs[i]);
4698                 if (count)
4699                         total_count += count;
4700                 else if (!total_count)
4701                         active_buf_count = info->tbufs[i].buf_count;
4702                 if (++i == info->tbuf_count)
4703                         i = 0;
4704         } while (i != info->tbuf_current);
4705
4706         /* read tx DMA status register */
4707         reg_value = rd_reg32(info, TDCSR);
4708
4709         /* if tx DMA active, last zero count buffer is in use */
4710         if (reg_value & BIT0)
4711                 total_count += active_buf_count;
4712
4713         /* add tx FIFO count = reg_value[15..8] */
4714         total_count += (reg_value >> 8) & 0xff;
4715
4716         /* if transmitter active add one byte for shift register */
4717         if (info->tx_active)
4718                 total_count++;
4719
4720         return total_count;
4721 }
4722
4723 /*
4724  * load transmit DMA buffer(s) with data
4725  */
4726 static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4727 {
4728         unsigned short count;
4729         unsigned int i;
4730         struct slgt_desc *d;
4731
4732         if (size == 0)
4733                 return;
4734
4735         DBGDATA(info, buf, size, "tx");
4736
4737         info->tbuf_start = i = info->tbuf_current;
4738
4739         while (size) {
4740                 d = &info->tbufs[i];
4741                 if (++i == info->tbuf_count)
4742                         i = 0;
4743
4744                 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4745                 memcpy(d->buf, buf, count);
4746
4747                 size -= count;
4748                 buf  += count;
4749
4750                 /*
4751                  * set EOF bit for last buffer of HDLC frame or
4752                  * for every buffer in raw mode
4753                  */
4754                 if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
4755                     info->params.mode == MGSL_MODE_RAW)
4756                         set_desc_eof(*d, 1);
4757                 else
4758                         set_desc_eof(*d, 0);
4759
4760                 set_desc_count(*d, count);
4761                 d->buf_count = count;
4762         }
4763
4764         info->tbuf_current = i;
4765 }
4766
4767 static int register_test(struct slgt_info *info)
4768 {
4769         static unsigned short patterns[] =
4770                 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4771         static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
4772         unsigned int i;
4773         int rc = 0;
4774
4775         for (i=0 ; i < count ; i++) {
4776                 wr_reg16(info, TIR, patterns[i]);
4777                 wr_reg16(info, BDR, patterns[(i+1)%count]);
4778                 if ((rd_reg16(info, TIR) != patterns[i]) ||
4779                     (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4780                         rc = -ENODEV;
4781                         break;
4782                 }
4783         }
4784         info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4785         info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4786         return rc;
4787 }
4788
4789 static int irq_test(struct slgt_info *info)
4790 {
4791         unsigned long timeout;
4792         unsigned long flags;
4793         struct tty_struct *oldtty = info->port.tty;
4794         u32 speed = info->params.data_rate;
4795
4796         info->params.data_rate = 921600;
4797         info->port.tty = NULL;
4798
4799         spin_lock_irqsave(&info->lock, flags);
4800         async_mode(info);
4801         slgt_irq_on(info, IRQ_TXIDLE);
4802
4803         /* enable transmitter */
4804         wr_reg16(info, TCR,
4805                 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4806
4807         /* write one byte and wait for tx idle */
4808         wr_reg16(info, TDR, 0);
4809
4810         /* assume failure */
4811         info->init_error = DiagStatus_IrqFailure;
4812         info->irq_occurred = false;
4813
4814         spin_unlock_irqrestore(&info->lock, flags);
4815
4816         timeout=100;
4817         while(timeout-- && !info->irq_occurred)
4818                 msleep_interruptible(10);
4819
4820         spin_lock_irqsave(&info->lock,flags);
4821         reset_port(info);
4822         spin_unlock_irqrestore(&info->lock,flags);
4823
4824         info->params.data_rate = speed;
4825         info->port.tty = oldtty;
4826
4827         info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
4828         return info->irq_occurred ? 0 : -ENODEV;
4829 }
4830
4831 static int loopback_test_rx(struct slgt_info *info)
4832 {
4833         unsigned char *src, *dest;
4834         int count;
4835
4836         if (desc_complete(info->rbufs[0])) {
4837                 count = desc_count(info->rbufs[0]);
4838                 src   = info->rbufs[0].buf;
4839                 dest  = info->tmp_rbuf;
4840
4841                 for( ; count ; count-=2, src+=2) {
4842                         /* src=data byte (src+1)=status byte */
4843                         if (!(*(src+1) & (BIT9 + BIT8))) {
4844                                 *dest = *src;
4845                                 dest++;
4846                                 info->tmp_rbuf_count++;
4847                         }
4848                 }
4849                 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
4850                 return 1;
4851         }
4852         return 0;
4853 }
4854
4855 static int loopback_test(struct slgt_info *info)
4856 {
4857 #define TESTFRAMESIZE 20
4858
4859         unsigned long timeout;
4860         u16 count = TESTFRAMESIZE;
4861         unsigned char buf[TESTFRAMESIZE];
4862         int rc = -ENODEV;
4863         unsigned long flags;
4864
4865         struct tty_struct *oldtty = info->port.tty;
4866         MGSL_PARAMS params;
4867
4868         memcpy(&params, &info->params, sizeof(params));
4869
4870         info->params.mode = MGSL_MODE_ASYNC;
4871         info->params.data_rate = 921600;
4872         info->params.loopback = 1;
4873         info->port.tty = NULL;
4874
4875         /* build and send transmit frame */
4876         for (count = 0; count < TESTFRAMESIZE; ++count)
4877                 buf[count] = (unsigned char)count;
4878
4879         info->tmp_rbuf_count = 0;
4880         memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
4881
4882         /* program hardware for HDLC and enabled receiver */
4883         spin_lock_irqsave(&info->lock,flags);
4884         async_mode(info);
4885         rx_start(info);
4886         info->tx_count = count;
4887         tx_load(info, buf, count);
4888         tx_start(info);
4889         spin_unlock_irqrestore(&info->lock, flags);
4890
4891         /* wait for receive complete */
4892         for (timeout = 100; timeout; --timeout) {
4893                 msleep_interruptible(10);
4894                 if (loopback_test_rx(info)) {
4895                         rc = 0;
4896                         break;
4897                 }
4898         }
4899
4900         /* verify received frame length and contents */
4901         if (!rc && (info->tmp_rbuf_count != count ||
4902                   memcmp(buf, info->tmp_rbuf, count))) {
4903                 rc = -ENODEV;
4904         }
4905
4906         spin_lock_irqsave(&info->lock,flags);
4907         reset_adapter(info);
4908         spin_unlock_irqrestore(&info->lock,flags);
4909
4910         memcpy(&info->params, &params, sizeof(info->params));
4911         info->port.tty = oldtty;
4912
4913         info->init_error = rc ? DiagStatus_DmaFailure : 0;
4914         return rc;
4915 }
4916
4917 static int adapter_test(struct slgt_info *info)
4918 {
4919         DBGINFO(("testing %s\n", info->device_name));
4920         if (register_test(info) < 0) {
4921                 printk("register test failure %s addr=%08X\n",
4922                         info->device_name, info->phys_reg_addr);
4923         } else if (irq_test(info) < 0) {
4924                 printk("IRQ test failure %s IRQ=%d\n",
4925                         info->device_name, info->irq_level);
4926         } else if (loopback_test(info) < 0) {
4927                 printk("loopback test failure %s\n", info->device_name);
4928         }
4929         return info->init_error;
4930 }
4931
4932 /*
4933  * transmit timeout handler
4934  */
4935 static void tx_timeout(unsigned long context)
4936 {
4937         struct slgt_info *info = (struct slgt_info*)context;
4938         unsigned long flags;
4939
4940         DBGINFO(("%s tx_timeout\n", info->device_name));
4941         if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
4942                 info->icount.txtimeout++;
4943         }
4944         spin_lock_irqsave(&info->lock,flags);
4945         info->tx_active = false;
4946         info->tx_count = 0;
4947         spin_unlock_irqrestore(&info->lock,flags);
4948
4949 #if SYNCLINK_GENERIC_HDLC
4950         if (info->netcount)
4951                 hdlcdev_tx_done(info);
4952         else
4953 #endif
4954                 bh_transmit(info);
4955 }
4956
4957 /*
4958  * receive buffer polling timer
4959  */
4960 static void rx_timeout(unsigned long context)
4961 {
4962         struct slgt_info *info = (struct slgt_info*)context;
4963         unsigned long flags;
4964
4965         DBGINFO(("%s rx_timeout\n", info->device_name));
4966         spin_lock_irqsave(&info->lock, flags);
4967         info->pending_bh |= BH_RECEIVE;
4968         spin_unlock_irqrestore(&info->lock, flags);
4969         bh_handler(&info->task);
4970 }
4971