2 * linux/arch/arm/mach-pxa/lubbock.c
4 * Support for the Intel DBPXA250 Development Platform.
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/major.h>
21 #include <linux/interrupt.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/partitions.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/ads7846.h>
27 #include <asm/arch/pxa2xx_spi.h>
29 #include <asm/setup.h>
30 #include <asm/memory.h>
31 #include <asm/mach-types.h>
32 #include <asm/hardware.h>
34 #include <asm/sizes.h>
36 #include <asm/mach/arch.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/irq.h>
39 #include <asm/mach/flash.h>
41 #include <asm/hardware/sa1111.h>
43 #include <asm/arch/pxa-regs.h>
44 #include <asm/arch/lubbock.h>
45 #include <asm/arch/udc.h>
46 #include <asm/arch/irda.h>
47 #include <asm/arch/pxafb.h>
48 #include <asm/arch/mmc.h>
53 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
55 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
59 local_irq_save(flags);
60 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
61 local_irq_restore(flags);
63 EXPORT_SYMBOL(lubbock_set_misc_wr);
65 static unsigned long lubbock_irq_enabled;
67 static void lubbock_mask_irq(unsigned int irq)
69 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
70 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
73 static void lubbock_unmask_irq(unsigned int irq)
75 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
76 /* the irq can be acknowledged only if deasserted, so it's done here */
77 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
78 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
81 static struct irq_chip lubbock_irq_chip = {
83 .ack = lubbock_mask_irq,
84 .mask = lubbock_mask_irq,
85 .unmask = lubbock_unmask_irq,
88 static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc,
91 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
93 GEDR(0) = GPIO_bit(0); /* clear our parent irq */
94 if (likely(pending)) {
95 irq = LUBBOCK_IRQ(0) + __ffs(pending);
96 desc = irq_desc + irq;
97 desc_handle_irq(irq, desc, regs);
99 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
103 static void __init lubbock_init_irq(void)
109 /* setup extra lubbock irqs */
110 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
111 set_irq_chip(irq, &lubbock_irq_chip);
112 set_irq_handler(irq, do_level_IRQ);
113 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
116 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
117 set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
122 static int lubbock_irq_resume(struct sys_device *dev)
124 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
128 static struct sysdev_class lubbock_irq_sysclass = {
129 set_kset_name("cpld_irq"),
130 .resume = lubbock_irq_resume,
133 static struct sys_device lubbock_irq_device = {
134 .cls = &lubbock_irq_sysclass,
137 static int __init lubbock_irq_device_init(void)
139 int ret = sysdev_class_register(&lubbock_irq_sysclass);
141 ret = sysdev_register(&lubbock_irq_device);
145 device_initcall(lubbock_irq_device_init);
149 static int lubbock_udc_is_connected(void)
151 return (LUB_MISC_RD & (1 << 9)) == 0;
154 static struct pxa2xx_udc_mach_info udc_info __initdata = {
155 .udc_is_connected = lubbock_udc_is_connected,
156 // no D+ pullup; lubbock can't connect/disconnect in software
159 static struct platform_device lub_audio_device = {
160 .name = "pxa2xx-ac97",
164 static struct resource sa1111_resources[] = {
168 .flags = IORESOURCE_MEM,
171 .start = LUBBOCK_SA1111_IRQ,
172 .end = LUBBOCK_SA1111_IRQ,
173 .flags = IORESOURCE_IRQ,
177 static struct platform_device sa1111_device = {
180 .num_resources = ARRAY_SIZE(sa1111_resources),
181 .resource = sa1111_resources,
184 static struct resource smc91x_resources[] = {
186 .name = "smc91x-regs",
189 .flags = IORESOURCE_MEM,
192 .start = LUBBOCK_ETH_IRQ,
193 .end = LUBBOCK_ETH_IRQ,
194 .flags = IORESOURCE_IRQ,
197 .name = "smc91x-attrib",
200 .flags = IORESOURCE_MEM,
204 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
205 * you can select it to replace the ucb1400 by switching the touchscreen cable
206 * (to J5) and poking board registers (as done below). Else it's only useful
207 * for the temperature sensors.
209 static struct resource pxa_ssp_resources[] = {
211 .start = __PREG(SSCR0_P(1)),
212 .end = __PREG(SSCR0_P(1)) + 0x14,
213 .flags = IORESOURCE_MEM,
218 .flags = IORESOURCE_IRQ,
222 static struct pxa2xx_spi_master pxa_ssp_master_info = {
223 .ssp_type = PXA25x_SSP,
224 .clock_enable = CKEN3_SSP,
228 static struct platform_device pxa_ssp = {
229 .name = "pxa2xx-spi",
231 .resource = pxa_ssp_resources,
232 .num_resources = ARRAY_SIZE(pxa_ssp_resources),
234 .platform_data = &pxa_ssp_master_info,
238 static int lubbock_ads7846_pendown_state(void)
240 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
244 static struct ads7846_platform_data ads_info = {
246 .vref_delay_usecs = 100, /* internal, no cap */
247 .get_pendown_state = lubbock_ads7846_pendown_state,
248 // .x_plate_ohms = 500, /* GUESS! */
249 // .y_plate_ohms = 500, /* GUESS! */
252 static void ads7846_cs(u32 command)
254 static const unsigned TS_nCS = 1 << 11;
255 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
258 static struct pxa2xx_spi_chip ads_hw = {
261 .cs_control = ads7846_cs,
264 static struct spi_board_info spi_board_info[] __initdata = { {
265 .modalias = "ads7846",
266 .platform_data = &ads_info,
267 .controller_data = &ads_hw,
268 .irq = LUBBOCK_BB_IRQ,
269 .max_speed_hz = 120000 /* max sample rate at 3V */
270 * 26 /* command + data + overhead */,
276 static struct platform_device smc91x_device = {
279 .num_resources = ARRAY_SIZE(smc91x_resources),
280 .resource = smc91x_resources,
283 static struct resource flash_resources[] = {
287 .flags = IORESOURCE_MEM,
291 .end = 0x04000000 + SZ_64M - 1,
292 .flags = IORESOURCE_MEM,
296 static struct mtd_partition lubbock_partitions[] = {
298 .name = "Bootloader",
301 .mask_flags = MTD_WRITEABLE /* force read-only */
305 .offset = 0x00040000,
307 .name = "Filesystem",
308 .size = MTDPART_SIZ_FULL,
313 static struct flash_platform_data lubbock_flash_data[2] = {
315 .map_name = "cfi_probe",
316 .parts = lubbock_partitions,
317 .nr_parts = ARRAY_SIZE(lubbock_partitions),
319 .map_name = "cfi_probe",
325 static struct platform_device lubbock_flash_device[2] = {
327 .name = "pxa2xx-flash",
330 .platform_data = &lubbock_flash_data[0],
332 .resource = &flash_resources[0],
336 .name = "pxa2xx-flash",
339 .platform_data = &lubbock_flash_data[1],
341 .resource = &flash_resources[1],
346 static struct platform_device *devices[] __initdata = {
350 &lubbock_flash_device[0],
351 &lubbock_flash_device[1],
355 static struct pxafb_mach_info sharp_lm8v31 __initdata = {
366 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
371 .lccr3 = LCCR3_PCP | LCCR3_Acb(255),
374 #define MMC_POLL_RATE msecs_to_jiffies(1000)
376 static void lubbock_mmc_poll(unsigned long);
377 static irqreturn_t (*mmc_detect_int)(int, void *, struct pt_regs *);
379 static struct timer_list mmc_timer = {
380 .function = lubbock_mmc_poll,
383 static void lubbock_mmc_poll(unsigned long data)
387 /* clear any previous irq state, then ... */
388 local_irq_save(flags);
389 LUB_IRQ_SET_CLR &= ~(1 << 0);
390 local_irq_restore(flags);
392 /* poll until mmc/sd card is removed */
393 if (LUB_IRQ_SET_CLR & (1 << 0))
394 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
396 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL);
397 enable_irq(LUBBOCK_SD_IRQ);
401 static irqreturn_t lubbock_detect_int(int irq, void *data, struct pt_regs *regs)
403 /* IRQ is level triggered; disable, and poll for removal */
405 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
407 return mmc_detect_int(irq, data, regs);
410 static int lubbock_mci_init(struct device *dev,
411 irqreturn_t (*detect_int)(int, void *, struct pt_regs *),
414 /* setup GPIO for PXA25x MMC controller */
415 pxa_gpio_mode(GPIO6_MMCCLK_MD);
416 pxa_gpio_mode(GPIO8_MMCCS0_MD);
418 /* detect card insert/eject */
419 mmc_detect_int = detect_int;
420 init_timer(&mmc_timer);
421 mmc_timer.data = (unsigned long) data;
422 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
423 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
426 static int lubbock_mci_get_ro(struct device *dev)
428 return (LUB_MISC_RD & (1 << 2)) != 0;
431 static void lubbock_mci_exit(struct device *dev, void *data)
433 free_irq(LUBBOCK_SD_IRQ, data);
434 del_timer_sync(&mmc_timer);
437 static struct pxamci_platform_data lubbock_mci_platform_data = {
438 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
440 .init = lubbock_mci_init,
441 .get_ro = lubbock_mci_get_ro,
442 .exit = lubbock_mci_exit,
445 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
449 local_irq_save(flags);
450 if (mode & IR_SIRMODE) {
451 LUB_MISC_WR &= ~(1 << 4);
452 } else if (mode & IR_FIRMODE) {
453 LUB_MISC_WR |= 1 << 4;
455 local_irq_restore(flags);
458 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
459 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
460 .transceiver_mode = lubbock_irda_transceiver_mode,
463 static void __init lubbock_init(void)
465 int flashboot = (LUB_CONF_SWITCHES & 1);
467 pxa_set_udc_info(&udc_info);
468 set_pxa_fb_info(&sharp_lm8v31);
469 pxa_set_mci_info(&lubbock_mci_platform_data);
470 pxa_set_ficp_info(&lubbock_ficp_platform_data);
472 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
473 (BOOT_DEF & 1) ? 2 : 4;
474 /* Compensate for the nROMBT switch which swaps the flash banks */
475 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
476 flashboot?"Flash":"ROM", flashboot);
478 lubbock_flash_data[flashboot^1].name = "application-flash";
479 lubbock_flash_data[flashboot].name = "boot-rom";
480 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
482 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
485 static struct map_desc lubbock_io_desc[] __initdata = {
487 .virtual = LUBBOCK_FPGA_VIRT,
488 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
489 .length = 0x00100000,
494 static void __init lubbock_map_io(void)
497 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
500 pxa_gpio_mode(GPIO23_SCLK_MD);
501 pxa_gpio_mode(GPIO25_STXD_MD);
502 pxa_gpio_mode(GPIO26_SRXD_MD);
504 /* This enables the BTUART */
505 pxa_gpio_mode(GPIO42_BTRXD_MD);
506 pxa_gpio_mode(GPIO43_BTTXD_MD);
507 pxa_gpio_mode(GPIO44_BTCTS_MD);
508 pxa_gpio_mode(GPIO45_BTRTS_MD);
510 /* This is for the SMC chip select */
511 pxa_gpio_mode(GPIO79_nCS_3_MD);
513 /* setup sleep mode values */
523 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
524 /* Maintainer: MontaVista Software Inc. */
525 .phys_io = 0x40000000,
526 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
527 .map_io = lubbock_map_io,
528 .init_irq = lubbock_init_irq,
530 .init_machine = lubbock_init,