2  *  drivers/s390/char/con3215.c
 
   3  *    3215 line mode terminal driver.
 
   6  *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
 
   7  *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
 
  10  *   Aug-2000: Added tab support
 
  11  *             Dan Morrison, IBM Corporation (dmorriso@cse.buffalo.edu)
 
  14 #include <linux/module.h>
 
  15 #include <linux/types.h>
 
  16 #include <linux/kdev_t.h>
 
  17 #include <linux/tty.h>
 
  18 #include <linux/tty_flip.h>
 
  19 #include <linux/vt_kern.h>
 
  20 #include <linux/init.h>
 
  21 #include <linux/console.h>
 
  22 #include <linux/interrupt.h>
 
  23 #include <linux/err.h>
 
  25 #include <linux/slab.h>
 
  26 #include <linux/bootmem.h>
 
  28 #include <asm/ccwdev.h>
 
  31 #include <asm/ebcdic.h>
 
  32 #include <asm/uaccess.h>
 
  33 #include <asm/delay.h>
 
  34 #include <asm/cpcmd.h>
 
  35 #include <asm/setup.h>
 
  40 #define NR_3215_REQ         (4*NR_3215)
 
  41 #define RAW3215_BUFFER_SIZE 65536     /* output buffer size */
 
  42 #define RAW3215_INBUF_SIZE  256       /* input buffer size */
 
  43 #define RAW3215_MIN_SPACE   128       /* minimum free space for wakeup */
 
  44 #define RAW3215_MIN_WRITE   1024      /* min. length for immediate output */
 
  45 #define RAW3215_MAX_BYTES   3968      /* max. bytes to write with one ssch */
 
  46 #define RAW3215_MAX_NEWLINE 50        /* max. lines to write with one ssch */
 
  47 #define RAW3215_NR_CCWS     3
 
  48 #define RAW3215_TIMEOUT     HZ/10     /* time for delayed output */
 
  50 #define RAW3215_FIXED       1         /* 3215 console device is not be freed */
 
  51 #define RAW3215_ACTIVE      2         /* set if the device is in use */
 
  52 #define RAW3215_WORKING     4         /* set if a request is being worked on */
 
  53 #define RAW3215_THROTTLED   8         /* set if reading is disabled */
 
  54 #define RAW3215_STOPPED     16        /* set if writing is disabled */
 
  55 #define RAW3215_CLOSING     32        /* set while in close process */
 
  56 #define RAW3215_TIMER_RUNS  64        /* set if the output delay timer is on */
 
  57 #define RAW3215_FLUSHING    128       /* set to flush buffer (no delay) */
 
  59 #define TAB_STOP_SIZE       8         /* tab stop size */
 
  62  * Request types for a 3215 device
 
  65         RAW3215_FREE, RAW3215_READ, RAW3215_WRITE
 
  69  * Request structure for a 3215 device
 
  72         enum raw3215_type type;       /* type of the request */
 
  73         int start, len;               /* start index & len in output buffer */
 
  74         int delayable;                /* indication to wait for more data */
 
  75         int residual;                 /* residual count for read request */
 
  76         struct ccw1 ccws[RAW3215_NR_CCWS]; /* space for the channel program */
 
  77         struct raw3215_info *info;    /* pointer to main structure */
 
  78         struct raw3215_req *next;     /* pointer to next request */
 
  79 } __attribute__ ((aligned(8)));
 
  82         struct ccw_device *cdev;      /* device for tty driver */
 
  83         spinlock_t *lock;             /* pointer to irq lock */
 
  84         int flags;                    /* state flags */
 
  85         char *buffer;                 /* pointer to output buffer */
 
  86         char *inbuf;                  /* pointer to input buffer */
 
  87         int head;                     /* first free byte in output buffer */
 
  88         int count;                    /* number of bytes in output buffer */
 
  89         int written;                  /* number of bytes in write requests */
 
  90         struct tty_struct *tty;       /* pointer to tty structure if present */
 
  91         struct tasklet_struct tasklet;
 
  92         struct raw3215_req *queued_read; /* pointer to queued read requests */
 
  93         struct raw3215_req *queued_write;/* pointer to queued write requests */
 
  94         wait_queue_head_t empty_wait; /* wait queue for flushing */
 
  95         struct timer_list timer;      /* timer for delayed output */
 
  96         char *message;                /* pending message from raw3215_irq */
 
  97         int msg_dstat;                /* dstat for pending message */
 
  98         int msg_cstat;                /* cstat for pending message */
 
  99         int line_pos;                 /* position on the line (for tabs) */
 
 100         char ubuffer[80];             /* copy_from_user buffer */
 
 103 /* array of 3215 devices structures */
 
 104 static struct raw3215_info *raw3215[NR_3215];
 
 105 /* spinlock to protect the raw3215 array */
 
 106 static DEFINE_SPINLOCK(raw3215_device_lock);
 
 107 /* list of free request structures */
 
 108 static struct raw3215_req *raw3215_freelist;
 
 109 /* spinlock to protect free list */
 
 110 static spinlock_t raw3215_freelist_lock;
 
 112 static struct tty_driver *tty3215_driver;
 
 115  * Get a request structure from the free list
 
 117 static inline struct raw3215_req *
 
 118 raw3215_alloc_req(void) {
 
 119         struct raw3215_req *req;
 
 122         spin_lock_irqsave(&raw3215_freelist_lock, flags);
 
 123         req = raw3215_freelist;
 
 124         raw3215_freelist = req->next;
 
 125         spin_unlock_irqrestore(&raw3215_freelist_lock, flags);
 
 130  * Put a request structure back to the free list
 
 133 raw3215_free_req(struct raw3215_req *req) {
 
 136         if (req->type == RAW3215_FREE)
 
 137                 return;         /* don't free a free request */
 
 138         req->type = RAW3215_FREE;
 
 139         spin_lock_irqsave(&raw3215_freelist_lock, flags);
 
 140         req->next = raw3215_freelist;
 
 141         raw3215_freelist = req;
 
 142         spin_unlock_irqrestore(&raw3215_freelist_lock, flags);
 
 146  * Set up a read request that reads up to 160 byte from the 3215 device.
 
 147  * If there is a queued read request it is used, but that shouldn't happen
 
 148  * because a 3215 terminal won't accept a new read before the old one is
 
 152 raw3215_mk_read_req(struct raw3215_info *raw)
 
 154         struct raw3215_req *req;
 
 157         /* there can only be ONE read request at a time */
 
 158         req = raw->queued_read;
 
 160                 /* no queued read request, use new req structure */
 
 161                 req = raw3215_alloc_req();
 
 162                 req->type = RAW3215_READ;
 
 164                 raw->queued_read = req;
 
 168         ccw->cmd_code = 0x0A; /* read inquiry */
 
 169         ccw->flags = 0x20;    /* ignore incorrect length */
 
 171         ccw->cda = (__u32) __pa(raw->inbuf);
 
 175  * Set up a write request with the information from the main structure.
 
 176  * A ccw chain is created that writes as much as possible from the output
 
 177  * buffer to the 3215 device. If a queued write exists it is replaced by
 
 178  * the new, probably lengthened request.
 
 181 raw3215_mk_write_req(struct raw3215_info *raw)
 
 183         struct raw3215_req *req;
 
 185         int len, count, ix, lines;
 
 187         if (raw->count <= raw->written)
 
 189         /* check if there is a queued write request */
 
 190         req = raw->queued_write;
 
 192                 /* no queued write request, use new req structure */
 
 193                 req = raw3215_alloc_req();
 
 194                 req->type = RAW3215_WRITE;
 
 196                 raw->queued_write = req;
 
 198                 raw->written -= req->len;
 
 202         req->start = (raw->head - raw->count + raw->written) &
 
 203                      (RAW3215_BUFFER_SIZE - 1);
 
 205          * now we have to count newlines. We can at max accept
 
 206          * RAW3215_MAX_NEWLINE newlines in a single ssch due to
 
 207          * a restriction in VM
 
 211         while (lines < RAW3215_MAX_NEWLINE && ix != raw->head) {
 
 212                 if (raw->buffer[ix] == 0x15)
 
 214                 ix = (ix + 1) & (RAW3215_BUFFER_SIZE - 1);
 
 216         len = ((ix - 1 - req->start) & (RAW3215_BUFFER_SIZE - 1)) + 1;
 
 217         if (len > RAW3215_MAX_BYTES)
 
 218                 len = RAW3215_MAX_BYTES;
 
 222         /* set the indication if we should try to enlarge this request */
 
 223         req->delayable = (ix == raw->head) && (len < RAW3215_MIN_WRITE);
 
 228                         ccw[-1].flags |= 0x40; /* use command chaining */
 
 229                 ccw->cmd_code = 0x01; /* write, auto carrier return */
 
 230                 ccw->flags = 0x20;    /* ignore incorrect length ind.  */
 
 232                         (__u32) __pa(raw->buffer + ix);
 
 234                 if (ix + count > RAW3215_BUFFER_SIZE)
 
 235                         count = RAW3215_BUFFER_SIZE - ix;
 
 238                 ix = (ix + count) & (RAW3215_BUFFER_SIZE - 1);
 
 242          * Add a NOP to the channel program. 3215 devices are purely
 
 243          * emulated and its much better to avoid the channel end
 
 244          * interrupt in this case.
 
 247                 ccw[-1].flags |= 0x40; /* use command chaining */
 
 248         ccw->cmd_code = 0x03; /* NOP */
 
 255  * Start a read or a write request
 
 258 raw3215_start_io(struct raw3215_info *raw)
 
 260         struct raw3215_req *req;
 
 263         req = raw->queued_read;
 
 265             !(raw->flags & (RAW3215_WORKING | RAW3215_THROTTLED))) {
 
 266                 /* dequeue request */
 
 267                 raw->queued_read = NULL;
 
 268                 res = ccw_device_start(raw->cdev, req->ccws,
 
 269                                        (unsigned long) req, 0, 0);
 
 271                         /* do_IO failed, put request back to queue */
 
 272                         raw->queued_read = req;
 
 274                         raw->flags |= RAW3215_WORKING;
 
 277         req = raw->queued_write;
 
 279             !(raw->flags & (RAW3215_WORKING | RAW3215_STOPPED))) {
 
 280                 /* dequeue request */
 
 281                 raw->queued_write = NULL;
 
 282                 res = ccw_device_start(raw->cdev, req->ccws,
 
 283                                        (unsigned long) req, 0, 0);
 
 285                         /* do_IO failed, put request back to queue */
 
 286                         raw->queued_write = req;
 
 288                         raw->flags |= RAW3215_WORKING;
 
 294  * Function to start a delayed output after RAW3215_TIMEOUT seconds
 
 297 raw3215_timeout(unsigned long __data)
 
 299         struct raw3215_info *raw = (struct raw3215_info *) __data;
 
 302         spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
 303         if (raw->flags & RAW3215_TIMER_RUNS) {
 
 304                 del_timer(&raw->timer);
 
 305                 raw->flags &= ~RAW3215_TIMER_RUNS;
 
 306                 raw3215_mk_write_req(raw);
 
 307                 raw3215_start_io(raw);
 
 309         spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
 313  * Function to conditionally start an IO. A read is started immediately,
 
 314  * a write is only started immediately if the flush flag is on or the
 
 315  * amount of data is bigger than RAW3215_MIN_WRITE. If a write is not
 
 316  * done immediately a timer is started with a delay of RAW3215_TIMEOUT.
 
 319 raw3215_try_io(struct raw3215_info *raw)
 
 321         if (!(raw->flags & RAW3215_ACTIVE))
 
 323         if (raw->queued_read != NULL)
 
 324                 raw3215_start_io(raw);
 
 325         else if (raw->queued_write != NULL) {
 
 326                 if ((raw->queued_write->delayable == 0) ||
 
 327                     (raw->flags & RAW3215_FLUSHING)) {
 
 328                         /* execute write requests bigger than minimum size */
 
 329                         raw3215_start_io(raw);
 
 330                         if (raw->flags & RAW3215_TIMER_RUNS) {
 
 331                                 del_timer(&raw->timer);
 
 332                                 raw->flags &= ~RAW3215_TIMER_RUNS;
 
 334                 } else if (!(raw->flags & RAW3215_TIMER_RUNS)) {
 
 335                         /* delay small writes */
 
 336                         init_timer(&raw->timer);
 
 337                         raw->timer.expires = RAW3215_TIMEOUT + jiffies;
 
 338                         raw->timer.data = (unsigned long) raw;
 
 339                         raw->timer.function = raw3215_timeout;
 
 340                         add_timer(&raw->timer);
 
 341                         raw->flags |= RAW3215_TIMER_RUNS;
 
 347  * The bottom half handler routine for 3215 devices. It tries to start
 
 348  * the next IO and wakes up processes waiting on the tty.
 
 351 raw3215_tasklet(void *data)
 
 353         struct raw3215_info *raw;
 
 354         struct tty_struct *tty;
 
 357         raw = (struct raw3215_info *) data;
 
 358         spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
 359         raw3215_mk_write_req(raw);
 
 361         spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
 362         /* Check for pending message from raw3215_irq */
 
 363         if (raw->message != NULL) {
 
 364                 printk(raw->message, raw->msg_dstat, raw->msg_cstat);
 
 369             RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) {
 
 375  * Interrupt routine, called from common io layer
 
 378 raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 
 380         struct raw3215_info *raw;
 
 381         struct raw3215_req *req;
 
 382         struct tty_struct *tty;
 
 386         raw = cdev->dev.driver_data;
 
 387         req = (struct raw3215_req *) intparm;
 
 388         cstat = irb->scsw.cstat;
 
 389         dstat = irb->scsw.dstat;
 
 391                 raw->message = KERN_WARNING
 
 392                         "Got nonzero channel status in raw3215_irq "
 
 393                         "(dev sts 0x%2x, sch sts 0x%2x)";
 
 394                 raw->msg_dstat = dstat;
 
 395                 raw->msg_cstat = cstat;
 
 396                 tasklet_schedule(&raw->tasklet);
 
 398         if (dstat & 0x01) { /* we got a unit exception */
 
 399                 dstat &= ~0x01;  /* we can ignore it */
 
 405                 /* Attention interrupt, someone hit the enter key */
 
 406                 raw3215_mk_read_req(raw);
 
 408                         memset(raw->inbuf, 0, RAW3215_INBUF_SIZE);
 
 409                 tasklet_schedule(&raw->tasklet);
 
 413                 /* Channel end interrupt. */
 
 414                 if ((raw = req->info) == NULL)
 
 415                         return;              /* That shouldn't happen ... */
 
 416                 if (req->type == RAW3215_READ) {
 
 417                         /* store residual count, then wait for device end */
 
 418                         req->residual = irb->scsw.count;
 
 423                 /* Device end interrupt. */
 
 424                 if ((raw = req->info) == NULL)
 
 425                         return;              /* That shouldn't happen ... */
 
 426                 if (req->type == RAW3215_READ && raw->tty != NULL) {
 
 430                         count = 160 - req->residual;
 
 431                         if (MACHINE_IS_P390) {
 
 432                                 slen = strnlen(raw->inbuf, RAW3215_INBUF_SIZE);
 
 436                         EBCASC(raw->inbuf, count);
 
 437                         cchar = ctrlchar_handle(raw->inbuf, count, tty);
 
 438                         switch (cchar & CTRLCHAR_MASK) {
 
 443                                 tty_insert_flip_char(tty, cchar, TTY_NORMAL);
 
 444                                 tty_flip_buffer_push(raw->tty);
 
 449                                     (strncmp(raw->inbuf+count-2, "\252n", 2) &&
 
 450                                      strncmp(raw->inbuf+count-2, "^n", 2)) ) {
 
 451                                         /* add the auto \n */
 
 452                                         raw->inbuf[count] = '\n';
 
 456                                 tty_insert_flip_string(tty, raw->inbuf, count);
 
 457                                 tty_flip_buffer_push(raw->tty);
 
 460                 } else if (req->type == RAW3215_WRITE) {
 
 461                         raw->count -= req->len;
 
 462                         raw->written -= req->len;
 
 464                 raw->flags &= ~RAW3215_WORKING;
 
 465                 raw3215_free_req(req);
 
 466                 /* check for empty wait */
 
 467                 if (waitqueue_active(&raw->empty_wait) &&
 
 468                     raw->queued_write == NULL &&
 
 469                     raw->queued_read == NULL) {
 
 470                         wake_up_interruptible(&raw->empty_wait);
 
 472                 tasklet_schedule(&raw->tasklet);
 
 475                 /* Strange interrupt, I'll do my best to clean up */
 
 476                 if (req != NULL && req->type != RAW3215_FREE) {
 
 477                         if (req->type == RAW3215_WRITE) {
 
 478                                 raw->count -= req->len;
 
 479                                 raw->written -= req->len;
 
 481                         raw->flags &= ~RAW3215_WORKING;
 
 482                         raw3215_free_req(req);
 
 484                 raw->message = KERN_WARNING
 
 485                         "Spurious interrupt in in raw3215_irq "
 
 486                         "(dev sts 0x%2x, sch sts 0x%2x)";
 
 487                 raw->msg_dstat = dstat;
 
 488                 raw->msg_cstat = cstat;
 
 489                 tasklet_schedule(&raw->tasklet);
 
 495  * Wait until length bytes are available int the output buffer.
 
 496  * Has to be called with the s390irq lock held. Can be called
 
 500 raw3215_make_room(struct raw3215_info *raw, unsigned int length)
 
 502         while (RAW3215_BUFFER_SIZE - raw->count < length) {
 
 503                 /* there might be a request pending */
 
 504                 raw->flags |= RAW3215_FLUSHING;
 
 505                 raw3215_mk_write_req(raw);
 
 507                 raw->flags &= ~RAW3215_FLUSHING;
 
 508 #ifdef CONFIG_TN3215_CONSOLE
 
 511                 /* Enough room freed up ? */
 
 512                 if (RAW3215_BUFFER_SIZE - raw->count >= length)
 
 514                 /* there might be another cpu waiting for the lock */
 
 515                 spin_unlock(get_ccwdev_lock(raw->cdev));
 
 517                 spin_lock(get_ccwdev_lock(raw->cdev));
 
 522  * String write routine for 3215 devices
 
 525 raw3215_write(struct raw3215_info *raw, const char *str, unsigned int length)
 
 531                 spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
 532                 count = (length > RAW3215_BUFFER_SIZE) ?
 
 533                                              RAW3215_BUFFER_SIZE : length;
 
 536                 raw3215_make_room(raw, count);
 
 538                 /* copy string to output buffer and convert it to EBCDIC */
 
 540                         c = min_t(int, count,
 
 541                                   min(RAW3215_BUFFER_SIZE - raw->count,
 
 542                                       RAW3215_BUFFER_SIZE - raw->head));
 
 545                         memcpy(raw->buffer + raw->head, str, c);
 
 546                         ASCEBC(raw->buffer + raw->head, c);
 
 547                         raw->head = (raw->head + c) & (RAW3215_BUFFER_SIZE - 1);
 
 553                 if (!(raw->flags & RAW3215_WORKING)) {
 
 554                         raw3215_mk_write_req(raw);
 
 555                         /* start or queue request */
 
 558                 spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
 563  * Put character routine for 3215 devices
 
 566 raw3215_putchar(struct raw3215_info *raw, unsigned char ch)
 
 569         unsigned int length, i;
 
 571         spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
 573                 length = TAB_STOP_SIZE - (raw->line_pos%TAB_STOP_SIZE);
 
 574                 raw->line_pos += length;
 
 576         } else if (ch == '\n') {
 
 583         raw3215_make_room(raw, length);
 
 585         for (i = 0; i < length; i++) {
 
 586                 raw->buffer[raw->head] = (char) _ascebc[(int) ch];
 
 587                 raw->head = (raw->head + 1) & (RAW3215_BUFFER_SIZE - 1);
 
 590         if (!(raw->flags & RAW3215_WORKING)) {
 
 591                 raw3215_mk_write_req(raw);
 
 592                 /* start or queue request */
 
 595         spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
 599  * Flush routine, it simply sets the flush flag and tries to start
 
 603 raw3215_flush_buffer(struct raw3215_info *raw)
 
 607         spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
 608         if (raw->count > 0) {
 
 609                 raw->flags |= RAW3215_FLUSHING;
 
 611                 raw->flags &= ~RAW3215_FLUSHING;
 
 613         spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
 617  * Fire up a 3215 device.
 
 620 raw3215_startup(struct raw3215_info *raw)
 
 624         if (raw->flags & RAW3215_ACTIVE)
 
 627         raw->flags |= RAW3215_ACTIVE;
 
 628         spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
 630         spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
 636  * Shutdown a 3215 device.
 
 639 raw3215_shutdown(struct raw3215_info *raw)
 
 641         DECLARE_WAITQUEUE(wait, current);
 
 644         if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FIXED))
 
 646         /* Wait for outstanding requests, then free irq */
 
 647         spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
 648         if ((raw->flags & RAW3215_WORKING) ||
 
 649             raw->queued_write != NULL ||
 
 650             raw->queued_read != NULL) {
 
 651                 raw->flags |= RAW3215_CLOSING;
 
 652                 add_wait_queue(&raw->empty_wait, &wait);
 
 653                 set_current_state(TASK_INTERRUPTIBLE);
 
 654                 spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
 656                 spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
 657                 remove_wait_queue(&raw->empty_wait, &wait);
 
 658                 set_current_state(TASK_RUNNING);
 
 659                 raw->flags &= ~(RAW3215_ACTIVE | RAW3215_CLOSING);
 
 661         spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
 665 raw3215_probe (struct ccw_device *cdev)
 
 667         struct raw3215_info *raw;
 
 670         /* Console is special. */
 
 671         if (raw3215[0] && (cdev->dev.driver_data == raw3215[0]))
 
 673         raw = kmalloc(sizeof(struct raw3215_info) +
 
 674                       RAW3215_INBUF_SIZE, GFP_KERNEL|GFP_DMA);
 
 678         spin_lock(&raw3215_device_lock);
 
 679         for (line = 0; line < NR_3215; line++) {
 
 680                 if (!raw3215[line]) {
 
 685         spin_unlock(&raw3215_device_lock);
 
 686         if (line == NR_3215) {
 
 692         raw->inbuf = (char *) raw + sizeof(struct raw3215_info);
 
 693         memset(raw, 0, sizeof(struct raw3215_info));
 
 694         raw->buffer = kmalloc(RAW3215_BUFFER_SIZE,
 
 696         if (raw->buffer == NULL) {
 
 697                 spin_lock(&raw3215_device_lock);
 
 698                 raw3215[line] = NULL;
 
 699                 spin_unlock(&raw3215_device_lock);
 
 703         tasklet_init(&raw->tasklet,
 
 704                      (void (*)(unsigned long)) raw3215_tasklet,
 
 705                      (unsigned long) raw);
 
 706         init_waitqueue_head(&raw->empty_wait);
 
 708         cdev->dev.driver_data = raw;
 
 709         cdev->handler = raw3215_irq;
 
 715 raw3215_remove (struct ccw_device *cdev)
 
 717         struct raw3215_info *raw;
 
 719         ccw_device_set_offline(cdev);
 
 720         raw = cdev->dev.driver_data;
 
 722                 cdev->dev.driver_data = NULL;
 
 729 raw3215_set_online (struct ccw_device *cdev)
 
 731         struct raw3215_info *raw;
 
 733         raw = cdev->dev.driver_data;
 
 737         return raw3215_startup(raw);
 
 741 raw3215_set_offline (struct ccw_device *cdev)
 
 743         struct raw3215_info *raw;
 
 745         raw = cdev->dev.driver_data;
 
 749         raw3215_shutdown(raw);
 
 754 static struct ccw_device_id raw3215_id[] = {
 
 755         { CCW_DEVICE(0x3215, 0) },
 
 756         { /* end of list */ },
 
 759 static struct ccw_driver raw3215_ccw_driver = {
 
 761         .owner          = THIS_MODULE,
 
 763         .probe          = &raw3215_probe,
 
 764         .remove         = &raw3215_remove,
 
 765         .set_online     = &raw3215_set_online,
 
 766         .set_offline    = &raw3215_set_offline,
 
 769 #ifdef CONFIG_TN3215_CONSOLE
 
 771  * Write a string to the 3215 console
 
 774 con3215_write(struct console *co, const char *str, unsigned int count)
 
 776         struct raw3215_info *raw;
 
 781         raw = raw3215[0];       /* console 3215 is the first one */
 
 783                 for (i = 0; i < count; i++)
 
 784                         if (str[i] == '\t' || str[i] == '\n')
 
 786                 raw3215_write(raw, str, i);
 
 790                         raw3215_putchar(raw, *str);
 
 797 static struct tty_driver *con3215_device(struct console *c, int *index)
 
 800         return tty3215_driver;
 
 804  * panic() calls console_unblank before the system enters a
 
 805  * disabled, endless loop.
 
 808 con3215_unblank(void)
 
 810         struct raw3215_info *raw;
 
 813         raw = raw3215[0];  /* console 3215 is the first one */
 
 814         spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
 815         raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
 
 816         spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
 820  *  The console structure for the 3215 console
 
 822 static struct console con3215 = {
 
 824         .write   = con3215_write,
 
 825         .device  = con3215_device,
 
 826         .unblank = con3215_unblank,
 
 827         .flags   = CON_PRINTBUFFER,
 
 831  * 3215 console initialization code called from console_init().
 
 832  * NOTE: This is called before kmalloc is available.
 
 837         struct ccw_device *cdev;
 
 838         struct raw3215_info *raw;
 
 839         struct raw3215_req *req;
 
 842         /* Check if 3215 is to be the console */
 
 843         if (!CONSOLE_IS_3215)
 
 846         /* Set the console mode for VM */
 
 848                 cpcmd("TERM CONMODE 3215", NULL, 0, NULL);
 
 849                 cpcmd("TERM AUTOCR OFF", NULL, 0, NULL);
 
 852         /* allocate 3215 request structures */
 
 853         raw3215_freelist = NULL;
 
 854         spin_lock_init(&raw3215_freelist_lock);
 
 855         for (i = 0; i < NR_3215_REQ; i++) {
 
 856                 req = (struct raw3215_req *) alloc_bootmem_low(sizeof(struct raw3215_req));
 
 857                 req->next = raw3215_freelist;
 
 858                 raw3215_freelist = req;
 
 861         cdev = ccw_device_probe_console();
 
 865         raw3215[0] = raw = (struct raw3215_info *)
 
 866                 alloc_bootmem_low(sizeof(struct raw3215_info));
 
 867         memset(raw, 0, sizeof(struct raw3215_info));
 
 868         raw->buffer = (char *) alloc_bootmem_low(RAW3215_BUFFER_SIZE);
 
 869         raw->inbuf = (char *) alloc_bootmem_low(RAW3215_INBUF_SIZE);
 
 871         cdev->dev.driver_data = raw;
 
 872         cdev->handler = raw3215_irq;
 
 874         raw->flags |= RAW3215_FIXED;
 
 875         tasklet_init(&raw->tasklet,
 
 876                      (void (*)(unsigned long)) raw3215_tasklet,
 
 877                      (unsigned long) raw);
 
 878         init_waitqueue_head(&raw->empty_wait);
 
 880         /* Request the console irq */
 
 881         if (raw3215_startup(raw) != 0) {
 
 882                 free_bootmem((unsigned long) raw->inbuf, RAW3215_INBUF_SIZE);
 
 883                 free_bootmem((unsigned long) raw->buffer, RAW3215_BUFFER_SIZE);
 
 884                 free_bootmem((unsigned long) raw, sizeof(struct raw3215_info));
 
 886                 printk("Couldn't find a 3215 console device\n");
 
 889         register_console(&con3215);
 
 892 console_initcall(con3215_init);
 
 898  * This routine is called whenever a 3215 tty is opened.
 
 901 tty3215_open(struct tty_struct *tty, struct file * filp)
 
 903         struct raw3215_info *raw;
 
 907         if ((line < 0) || (line >= NR_3215))
 
 914         tty->driver_data = raw;
 
 917         tty->low_latency = 0;  /* don't use bottom half for pushing chars */
 
 919          * Start up 3215 device
 
 921         retval = raw3215_startup(raw);
 
 931  * This routine is called when the 3215 tty is closed. We wait
 
 932  * for the remaining request to be completed. Then we clean up.
 
 935 tty3215_close(struct tty_struct *tty, struct file * filp)
 
 937         struct raw3215_info *raw;
 
 939         raw = (struct raw3215_info *) tty->driver_data;
 
 940         if (raw == NULL || tty->count > 1)
 
 943         /* Shutdown the terminal */
 
 944         raw3215_shutdown(raw);
 
 950  * Returns the amount of free space in the output buffer.
 
 953 tty3215_write_room(struct tty_struct *tty)
 
 955         struct raw3215_info *raw;
 
 957         raw = (struct raw3215_info *) tty->driver_data;
 
 959         /* Subtract TAB_STOP_SIZE to allow for a tab, 8 <<< 64K */
 
 960         if ((RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE) >= 0)
 
 961                 return RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE;
 
 967  * String write routine for 3215 ttys
 
 970 tty3215_write(struct tty_struct * tty,
 
 971               const unsigned char *buf, int count)
 
 973         struct raw3215_info *raw;
 
 977         raw = (struct raw3215_info *) tty->driver_data;
 
 978         raw3215_write(raw, buf, count);
 
 983  * Put character routine for 3215 ttys
 
 986 tty3215_put_char(struct tty_struct *tty, unsigned char ch)
 
 988         struct raw3215_info *raw;
 
 992         raw = (struct raw3215_info *) tty->driver_data;
 
 993         raw3215_putchar(raw, ch);
 
 997 tty3215_flush_chars(struct tty_struct *tty)
 
1002  * Returns the number of characters in the output buffer
 
1005 tty3215_chars_in_buffer(struct tty_struct *tty)
 
1007         struct raw3215_info *raw;
 
1009         raw = (struct raw3215_info *) tty->driver_data;
 
1014 tty3215_flush_buffer(struct tty_struct *tty)
 
1016         struct raw3215_info *raw;
 
1018         raw = (struct raw3215_info *) tty->driver_data;
 
1019         raw3215_flush_buffer(raw);
 
1024  * Currently we don't have any io controls for 3215 ttys
 
1027 tty3215_ioctl(struct tty_struct *tty, struct file * file,
 
1028               unsigned int cmd, unsigned long arg)
 
1030         if (tty->flags & (1 << TTY_IO_ERROR))
 
1035                 return -ENOIOCTLCMD;
 
1041  * Disable reading from a 3215 tty
 
1044 tty3215_throttle(struct tty_struct * tty)
 
1046         struct raw3215_info *raw;
 
1048         raw = (struct raw3215_info *) tty->driver_data;
 
1049         raw->flags |= RAW3215_THROTTLED;
 
1053  * Enable reading from a 3215 tty
 
1056 tty3215_unthrottle(struct tty_struct * tty)
 
1058         struct raw3215_info *raw;
 
1059         unsigned long flags;
 
1061         raw = (struct raw3215_info *) tty->driver_data;
 
1062         if (raw->flags & RAW3215_THROTTLED) {
 
1063                 spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
1064                 raw->flags &= ~RAW3215_THROTTLED;
 
1065                 raw3215_try_io(raw);
 
1066                 spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
1071  * Disable writing to a 3215 tty
 
1074 tty3215_stop(struct tty_struct *tty)
 
1076         struct raw3215_info *raw;
 
1078         raw = (struct raw3215_info *) tty->driver_data;
 
1079         raw->flags |= RAW3215_STOPPED;
 
1083  * Enable writing to a 3215 tty
 
1086 tty3215_start(struct tty_struct *tty)
 
1088         struct raw3215_info *raw;
 
1089         unsigned long flags;
 
1091         raw = (struct raw3215_info *) tty->driver_data;
 
1092         if (raw->flags & RAW3215_STOPPED) {
 
1093                 spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 
1094                 raw->flags &= ~RAW3215_STOPPED;
 
1095                 raw3215_try_io(raw);
 
1096                 spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 
1100 static const struct tty_operations tty3215_ops = {
 
1101         .open = tty3215_open,
 
1102         .close = tty3215_close,
 
1103         .write = tty3215_write,
 
1104         .put_char = tty3215_put_char,
 
1105         .flush_chars = tty3215_flush_chars,
 
1106         .write_room = tty3215_write_room,
 
1107         .chars_in_buffer = tty3215_chars_in_buffer,
 
1108         .flush_buffer = tty3215_flush_buffer,
 
1109         .ioctl = tty3215_ioctl,
 
1110         .throttle = tty3215_throttle,
 
1111         .unthrottle = tty3215_unthrottle,
 
1112         .stop = tty3215_stop,
 
1113         .start = tty3215_start,
 
1117  * 3215 tty registration code called from tty_init().
 
1118  * Most kernel services (incl. kmalloc) are available at this poimt.
 
1123         struct tty_driver *driver;
 
1126         if (!CONSOLE_IS_3215)
 
1129         driver = alloc_tty_driver(NR_3215);
 
1133         ret = ccw_driver_register(&raw3215_ccw_driver);
 
1135                 put_tty_driver(driver);
 
1139          * Initialize the tty_driver structure
 
1140          * Entries in tty3215_driver that are NOT initialized:
 
1141          * proc_entry, set_termios, flush_buffer, set_ldisc, write_proc
 
1144         driver->owner = THIS_MODULE;
 
1145         driver->driver_name = "tty3215";
 
1146         driver->name = "ttyS";
 
1147         driver->major = TTY_MAJOR;
 
1148         driver->minor_start = 64;
 
1149         driver->type = TTY_DRIVER_TYPE_SYSTEM;
 
1150         driver->subtype = SYSTEM_TYPE_TTY;
 
1151         driver->init_termios = tty_std_termios;
 
1152         driver->init_termios.c_iflag = IGNBRK | IGNPAR;
 
1153         driver->init_termios.c_oflag = ONLCR | XTABS;
 
1154         driver->init_termios.c_lflag = ISIG;
 
1155         driver->flags = TTY_DRIVER_REAL_RAW;
 
1156         tty_set_operations(driver, &tty3215_ops);
 
1157         ret = tty_register_driver(driver);
 
1159                 printk("Couldn't register tty3215 driver\n");
 
1160                 put_tty_driver(driver);
 
1163         tty3215_driver = driver;
 
1170         tty_unregister_driver(tty3215_driver);
 
1171         put_tty_driver(tty3215_driver);
 
1172         ccw_driver_unregister(&raw3215_ccw_driver);
 
1175 module_init(tty3215_init);
 
1176 module_exit(tty3215_exit);