git.oblomov.eu Git - linux-2.6/blob - arch/ppc/platforms/pmac_smp.c

   1 /*
   2  * SMP support for power macintosh.
   3  *
   4  * We support both the old "powersurge" SMP architecture
   5  * and the current Core99 (G4 PowerMac) machines.
   6  *
   7  * Note that we don't support the very first rev. of
   8  * Apple/DayStar 2 CPUs board, the one with the funky
   9  * watchdog. Hopefully, none of these should be there except
  10  * maybe internally to Apple. I should probably still add some
  11  * code to detect this card though and disable SMP. --BenH.
  12  *
  13  * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
  14  * and Ben Herrenschmidt <benh@kernel.crashing.org>.
  15  *
  16  * Support for DayStar quad CPU cards
  17  * Copyright (C) XLR8, Inc. 1994-2000
  18  *
  19  *  This program is free software; you can redistribute it and/or
  20  *  modify it under the terms of the GNU General Public License
  21  *  as published by the Free Software Foundation; either version
  22  *  2 of the License, or (at your option) any later version.
  23  */
  24 #include <linux/config.h>
  25 #include <linux/kernel.h>
  26 #include <linux/sched.h>
  27 #include <linux/smp.h>
  28 #include <linux/smp_lock.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/kernel_stat.h>
  31 #include <linux/delay.h>
  32 #include <linux/init.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/errno.h>
  35 #include <linux/hardirq.h>
  36
  37 #include <asm/ptrace.h>
  38 #include <asm/atomic.h>
  39 #include <asm/irq.h>
  40 #include <asm/page.h>
  41 #include <asm/pgtable.h>
  42 #include <asm/sections.h>
  43 #include <asm/io.h>
  44 #include <asm/prom.h>
  45 #include <asm/smp.h>
  46 #include <asm/residual.h>
  47 #include <asm/machdep.h>
  48 #include <asm/pmac_feature.h>
  49 #include <asm/time.h>
  50 #include <asm/open_pic.h>
  51 #include <asm/cacheflush.h>
  52 #include <asm/keylargo.h>
  53
  54 /*
  55  * Powersurge (old powermac SMP) support.
  56  */
  57
  58 extern void __secondary_start_psurge(void);
  59 extern void __secondary_start_psurge2(void);    /* Temporary horrible hack */
  60 extern void __secondary_start_psurge3(void);    /* Temporary horrible hack */
  61
  62 /* Addresses for powersurge registers */
  63 #define HAMMERHEAD_BASE         0xf8000000
  64 #define HHEAD_CONFIG            0x90
  65 #define HHEAD_SEC_INTR          0xc0
  66
  67 /* register for interrupting the primary processor on the powersurge */
  68 /* N.B. this is actually the ethernet ROM! */
  69 #define PSURGE_PRI_INTR         0xf3019000
  70
  71 /* register for storing the start address for the secondary processor */
  72 /* N.B. this is the PCI config space address register for the 1st bridge */
  73 #define PSURGE_START            0xf2800000
  74
  75 /* Daystar/XLR8 4-CPU card */
  76 #define PSURGE_QUAD_REG_ADDR    0xf8800000
  77
  78 #define PSURGE_QUAD_IRQ_SET     0
  79 #define PSURGE_QUAD_IRQ_CLR     1
  80 #define PSURGE_QUAD_IRQ_PRIMARY 2
  81 #define PSURGE_QUAD_CKSTOP_CTL  3
  82 #define PSURGE_QUAD_PRIMARY_ARB 4
  83 #define PSURGE_QUAD_BOARD_ID    6
  84 #define PSURGE_QUAD_WHICH_CPU   7
  85 #define PSURGE_QUAD_CKSTOP_RDBK 8
  86 #define PSURGE_QUAD_RESET_CTL   11
  87
  88 #define PSURGE_QUAD_OUT(r, v)   (out_8(quad_base + ((r) << 4) + 4, (v)))
  89 #define PSURGE_QUAD_IN(r)       (in_8(quad_base + ((r) << 4) + 4) & 0x0f)
  90 #define PSURGE_QUAD_BIS(r, v)   (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
  91 #define PSURGE_QUAD_BIC(r, v)   (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
  92
  93 /* virtual addresses for the above */
  94 static volatile u8 __iomem *hhead_base;
  95 static volatile u8 __iomem *quad_base;
  96 static volatile u32 __iomem *psurge_pri_intr;
  97 static volatile u8 __iomem *psurge_sec_intr;
  98 static volatile u32 __iomem *psurge_start;
  99
 100 /* values for psurge_type */
 101 #define PSURGE_NONE             -1
 102 #define PSURGE_DUAL             0
 103 #define PSURGE_QUAD_OKEE        1
 104 #define PSURGE_QUAD_COTTON      2
 105 #define PSURGE_QUAD_ICEGRASS    3
 106
 107 /* what sort of powersurge board we have */
 108 static int psurge_type = PSURGE_NONE;
 109
 110 /* L2 and L3 cache settings to pass from CPU0 to CPU1 */
 111 volatile static long int core99_l2_cache;
 112 volatile static long int core99_l3_cache;
 113
 114 /* Timebase freeze GPIO */
 115 static unsigned int core99_tb_gpio;
 116
 117 /* Sync flag for HW tb sync */
 118 static volatile int sec_tb_reset = 0;
 119 static unsigned int pri_tb_hi, pri_tb_lo;
 120 static unsigned int pri_tb_stamp;
 121
 122 static void __init core99_init_caches(int cpu)
 123 {
 124         if (!cpu_has_feature(CPU_FTR_L2CR))
 125                 return;
 126
 127         if (cpu == 0) {
 128                 core99_l2_cache = _get_L2CR();
 129                 printk("CPU0: L2CR is %lx\n", core99_l2_cache);
 130         } else {
 131                 printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
 132                 _set_L2CR(0);
 133                 _set_L2CR(core99_l2_cache);
 134                 printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
 135         }
 136
 137         if (!cpu_has_feature(CPU_FTR_L3CR))
 138                 return;
 139
 140         if (cpu == 0){
 141                 core99_l3_cache = _get_L3CR();
 142                 printk("CPU0: L3CR is %lx\n", core99_l3_cache);
 143         } else {
 144                 printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
 145                 _set_L3CR(0);
 146                 _set_L3CR(core99_l3_cache);
 147                 printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
 148         }
 149 }
 150
 151 /*
 152  * Set and clear IPIs for powersurge.
 153  */
 154 static inline void psurge_set_ipi(int cpu)
 155 {
 156         if (psurge_type == PSURGE_NONE)
 157                 return;
 158         if (cpu == 0)
 159                 in_be32(psurge_pri_intr);
 160         else if (psurge_type == PSURGE_DUAL)
 161                 out_8(psurge_sec_intr, 0);
 162         else
 163                 PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
 164 }
 165
 166 static inline void psurge_clr_ipi(int cpu)
 167 {
 168         if (cpu > 0) {
 169                 switch(psurge_type) {
 170                 case PSURGE_DUAL:
 171                         out_8(psurge_sec_intr, ~0);
 172                 case PSURGE_NONE:
 173                         break;
 174                 default:
 175                         PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
 176                 }
 177         }
 178 }
 179
 180 /*
 181  * On powersurge (old SMP powermac architecture) we don't have
 182  * separate IPIs for separate messages like openpic does.  Instead
 183  * we have a bitmap for each processor, where a 1 bit means that
 184  * the corresponding message is pending for that processor.
 185  * Ideally each cpu's entry would be in a different cache line.
 186  *  -- paulus.
 187  */
 188 static unsigned long psurge_smp_message[NR_CPUS];
 189
 190 void __pmac psurge_smp_message_recv(struct pt_regs *regs)
 191 {
 192         int cpu = smp_processor_id();
 193         int msg;
 194
 195         /* clear interrupt */
 196         psurge_clr_ipi(cpu);
 197
 198         if (num_online_cpus() < 2)
 199                 return;
 200
 201         /* make sure there is a message there */
 202         for (msg = 0; msg < 4; msg++)
 203                 if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
 204                         smp_message_recv(msg, regs);
 205 }
 206
 207 irqreturn_t __pmac psurge_primary_intr(int irq, void *d, struct pt_regs *regs)
 208 {
 209         psurge_smp_message_recv(regs);
 210         return IRQ_HANDLED;
 211 }
 212
 213 static void __pmac smp_psurge_message_pass(int target, int msg, unsigned long data,
 214                                            int wait)
 215 {
 216         int i;
 217
 218         if (num_online_cpus() < 2)
 219                 return;
 220
 221         for (i = 0; i < NR_CPUS; i++) {
 222                 if (!cpu_online(i))
 223                         continue;
 224                 if (target == MSG_ALL
 225                     || (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
 226                     || target == i) {
 227                         set_bit(msg, &psurge_smp_message[i]);
 228                         psurge_set_ipi(i);
 229                 }
 230         }
 231 }
 232
 233 /*
 234  * Determine a quad card presence. We read the board ID register, we
 235  * force the data bus to change to something else, and we read it again.
 236  * It it's stable, then the register probably exist (ugh !)
 237  */
 238 static int __init psurge_quad_probe(void)
 239 {
 240         int type;
 241         unsigned int i;
 242
 243         type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
 244         if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
 245             || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
 246                 return PSURGE_DUAL;
 247
 248         /* looks OK, try a slightly more rigorous test */
 249         /* bogus is not necessarily cacheline-aligned,
 250            though I don't suppose that really matters.  -- paulus */
 251         for (i = 0; i < 100; i++) {
 252                 volatile u32 bogus[8];
 253                 bogus[(0+i)%8] = 0x00000000;
 254                 bogus[(1+i)%8] = 0x55555555;
 255                 bogus[(2+i)%8] = 0xFFFFFFFF;
 256                 bogus[(3+i)%8] = 0xAAAAAAAA;
 257                 bogus[(4+i)%8] = 0x33333333;
 258                 bogus[(5+i)%8] = 0xCCCCCCCC;
 259                 bogus[(6+i)%8] = 0xCCCCCCCC;
 260                 bogus[(7+i)%8] = 0x33333333;
 261                 wmb();
 262                 asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
 263                 mb();
 264                 if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
 265                         return PSURGE_DUAL;
 266         }
 267         return type;
 268 }
 269
 270 static void __init psurge_quad_init(void)
 271 {
 272         int procbits;
 273
 274         if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
 275         procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
 276         if (psurge_type == PSURGE_QUAD_ICEGRASS)
 277                 PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
 278         else
 279                 PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
 280         mdelay(33);
 281         out_8(psurge_sec_intr, ~0);
 282         PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
 283         PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
 284         if (psurge_type != PSURGE_QUAD_ICEGRASS)
 285                 PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
 286         PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
 287         mdelay(33);
 288         PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
 289         mdelay(33);
 290         PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
 291         mdelay(33);
 292 }
 293
 294 static int __init smp_psurge_probe(void)
 295 {
 296         int i, ncpus;
 297
 298         /* We don't do SMP on the PPC601 -- paulus */
 299         if (PVR_VER(mfspr(SPRN_PVR)) == 1)
 300                 return 1;
 301
 302         /*
 303          * The powersurge cpu board can be used in the generation
 304          * of powermacs that have a socket for an upgradeable cpu card,
 305          * including the 7500, 8500, 9500, 9600.
 306          * The device tree doesn't tell you if you have 2 cpus because
 307          * OF doesn't know anything about the 2nd processor.
 308          * Instead we look for magic bits in magic registers,
 309          * in the hammerhead memory controller in the case of the
 310          * dual-cpu powersurge board.  -- paulus.
 311          */
 312         if (find_devices("hammerhead") == NULL)
 313                 return 1;
 314
 315         hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
 316         quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
 317         psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
 318
 319         psurge_type = psurge_quad_probe();
 320         if (psurge_type != PSURGE_DUAL) {
 321                 psurge_quad_init();
 322                 /* All released cards using this HW design have 4 CPUs */
 323                 ncpus = 4;
 324         } else {
 325                 iounmap(quad_base);
 326                 if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
 327                         /* not a dual-cpu card */
 328                         iounmap(hhead_base);
 329                         psurge_type = PSURGE_NONE;
 330                         return 1;
 331                 }
 332                 ncpus = 2;
 333         }
 334
 335         psurge_start = ioremap(PSURGE_START, 4);
 336         psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
 337
 338         /* this is not actually strictly necessary -- paulus. */
 339         for (i = 1; i < ncpus; ++i)
 340                 smp_hw_index[i] = i;
 341
 342         if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
 343
 344         return ncpus;
 345 }
 346
 347 static void __init smp_psurge_kick_cpu(int nr)
 348 {
 349         void (*start)(void) = __secondary_start_psurge;
 350         unsigned long a;
 351
 352         /* may need to flush here if secondary bats aren't setup */
 353         for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
 354                 asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
 355         asm volatile("sync");
 356
 357         if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
 358
 359         /* setup entry point of secondary processor */
 360         switch (nr) {
 361         case 2:
 362                 start = __secondary_start_psurge2;
 363                 break;
 364         case 3:
 365                 start = __secondary_start_psurge3;
 366                 break;
 367         }
 368
 369         out_be32(psurge_start, __pa(start));
 370         mb();
 371
 372         psurge_set_ipi(nr);
 373         udelay(10);
 374         psurge_clr_ipi(nr);
 375
 376         if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
 377 }
 378
 379 /*
 380  * With the dual-cpu powersurge board, the decrementers and timebases
 381  * of both cpus are frozen after the secondary cpu is started up,
 382  * until we give the secondary cpu another interrupt.  This routine
 383  * uses this to get the timebases synchronized.
 384  *  -- paulus.
 385  */
 386 static void __init psurge_dual_sync_tb(int cpu_nr)
 387 {
 388         int t;
 389
 390         set_dec(tb_ticks_per_jiffy);
 391         set_tb(0, 0);
 392         last_jiffy_stamp(cpu_nr) = 0;
 393
 394         if (cpu_nr > 0) {
 395                 mb();
 396                 sec_tb_reset = 1;
 397                 return;
 398         }
 399
 400         /* wait for the secondary to have reset its TB before proceeding */
 401         for (t = 10000000; t > 0 && !sec_tb_reset; --t)
 402                 ;
 403
 404         /* now interrupt the secondary, starting both TBs */
 405         psurge_set_ipi(1);
 406
 407         smp_tb_synchronized = 1;
 408 }
 409
 410 static struct irqaction psurge_irqaction = {
 411         .handler = psurge_primary_intr,
 412         .flags = SA_INTERRUPT,
 413         .mask = CPU_MASK_NONE,
 414         .name = "primary IPI",
 415 };
 416
 417 static void __init smp_psurge_setup_cpu(int cpu_nr)
 418 {
 419
 420         if (cpu_nr == 0) {
 421                 /* If we failed to start the second CPU, we should still
 422                  * send it an IPI to start the timebase & DEC or we might
 423                  * have them stuck.
 424                  */
 425                 if (num_online_cpus() < 2) {
 426                         if (psurge_type == PSURGE_DUAL)
 427                                 psurge_set_ipi(1);
 428                         return;
 429                 }
 430                 /* reset the entry point so if we get another intr we won't
 431                  * try to startup again */
 432                 out_be32(psurge_start, 0x100);
 433                 if (setup_irq(30, &psurge_irqaction))
 434                         printk(KERN_ERR "Couldn't get primary IPI interrupt");
 435         }
 436
 437         if (psurge_type == PSURGE_DUAL)
 438                 psurge_dual_sync_tb(cpu_nr);
 439 }
 440
 441 void __init smp_psurge_take_timebase(void)
 442 {
 443         /* Dummy implementation */
 444 }
 445
 446 void __init smp_psurge_give_timebase(void)
 447 {
 448         /* Dummy implementation */
 449 }
 450
 451 static int __init smp_core99_probe(void)
 452 {
 453 #ifdef CONFIG_6xx
 454         extern int powersave_nap;
 455 #endif
 456         struct device_node *cpus, *firstcpu;
 457         int i, ncpus = 0, boot_cpu = -1;
 458         u32 *tbprop = NULL;
 459
 460         if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
 461         cpus = firstcpu = find_type_devices("cpu");
 462         while(cpus != NULL) {
 463                 u32 *regprop = (u32 *)get_property(cpus, "reg", NULL);
 464                 char *stateprop = (char *)get_property(cpus, "state", NULL);
 465                 if (regprop != NULL && stateprop != NULL &&
 466                     !strncmp(stateprop, "running", 7))
 467                         boot_cpu = *regprop;
 468                 ++ncpus;
 469                 cpus = cpus->next;
 470         }
 471         if (boot_cpu == -1)
 472                 printk(KERN_WARNING "Couldn't detect boot CPU !\n");
 473         if (boot_cpu != 0)
 474                 printk(KERN_WARNING "Boot CPU is %d, unsupported setup !\n", boot_cpu);
 475
 476         if (machine_is_compatible("MacRISC4")) {
 477                 extern struct smp_ops_t core99_smp_ops;
 478
 479                 core99_smp_ops.take_timebase = smp_generic_take_timebase;
 480                 core99_smp_ops.give_timebase = smp_generic_give_timebase;
 481         } else {
 482                 if (firstcpu != NULL)
 483                         tbprop = (u32 *)get_property(firstcpu, "timebase-enable", NULL);
 484                 if (tbprop)
 485                         core99_tb_gpio = *tbprop;
 486                 else
 487                         core99_tb_gpio = KL_GPIO_TB_ENABLE;
 488         }
 489
 490         if (ncpus > 1) {
 491                 openpic_request_IPIs();
 492                 for (i = 1; i < ncpus; ++i)
 493                         smp_hw_index[i] = i;
 494 #ifdef CONFIG_6xx
 495                 powersave_nap = 0;
 496 #endif
 497                 core99_init_caches(0);
 498         }
 499
 500         return ncpus;
 501 }
 502
 503 static void __init smp_core99_kick_cpu(int nr)
 504 {
 505         unsigned long save_vector, new_vector;
 506         unsigned long flags;
 507
 508         volatile unsigned long *vector
 509                  = ((volatile unsigned long *)(KERNELBASE+0x100));
 510         if (nr < 1 || nr > 3)
 511                 return;
 512         if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
 513
 514         local_irq_save(flags);
 515         local_irq_disable();
 516
 517         /* Save reset vector */
 518         save_vector = *vector;
 519
 520         /* Setup fake reset vector that does
 521          *   b __secondary_start_psurge - KERNELBASE
 522          */
 523         switch(nr) {
 524                 case 1:
 525                         new_vector = (unsigned long)__secondary_start_psurge;
 526                         break;
 527                 case 2:
 528                         new_vector = (unsigned long)__secondary_start_psurge2;
 529                         break;
 530                 case 3:
 531                         new_vector = (unsigned long)__secondary_start_psurge3;
 532                         break;
 533         }
 534         *vector = 0x48000002 + new_vector - KERNELBASE;
 535
 536         /* flush data cache and inval instruction cache */
 537         flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
 538
 539         /* Put some life in our friend */
 540         pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
 541
 542         /* FIXME: We wait a bit for the CPU to take the exception, I should
 543          * instead wait for the entry code to set something for me. Well,
 544          * ideally, all that crap will be done in prom.c and the CPU left
 545          * in a RAM-based wait loop like CHRP.
 546          */
 547         mdelay(1);
 548
 549         /* Restore our exception vector */
 550         *vector = save_vector;
 551         flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
 552
 553         local_irq_restore(flags);
 554         if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
 555 }
 556
 557 static void __init smp_core99_setup_cpu(int cpu_nr)
 558 {
 559         /* Setup L2/L3 */
 560         if (cpu_nr != 0)
 561                 core99_init_caches(cpu_nr);
 562
 563         /* Setup openpic */
 564         do_openpic_setup_cpu();
 565
 566         if (cpu_nr == 0) {
 567 #ifdef CONFIG_POWER4
 568                 extern void g5_phy_disable_cpu1(void);
 569
 570                 /* If we didn't start the second CPU, we must take
 571                  * it off the bus
 572                  */
 573                 if (machine_is_compatible("MacRISC4") &&
 574                     num_online_cpus() < 2)
 575                         g5_phy_disable_cpu1();
 576 #endif /* CONFIG_POWER4 */
 577                 if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
 578         }
 579 }
 580
 581 /* not __init, called in sleep/wakeup code */
 582 void smp_core99_take_timebase(void)
 583 {
 584         unsigned long flags;
 585
 586         /* tell the primary we're here */
 587         sec_tb_reset = 1;
 588         mb();
 589
 590         /* wait for the primary to set pri_tb_hi/lo */
 591         while (sec_tb_reset < 2)
 592                 mb();
 593
 594         /* set our stuff the same as the primary */
 595         local_irq_save(flags);
 596         set_dec(1);
 597         set_tb(pri_tb_hi, pri_tb_lo);
 598         last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp;
 599         mb();
 600
 601         /* tell the primary we're done */
 602         sec_tb_reset = 0;
 603         mb();
 604         local_irq_restore(flags);
 605 }
 606
 607 /* not __init, called in sleep/wakeup code */
 608 void smp_core99_give_timebase(void)
 609 {
 610         unsigned long flags;
 611         unsigned int t;
 612
 613         /* wait for the secondary to be in take_timebase */
 614         for (t = 100000; t > 0 && !sec_tb_reset; --t)
 615                 udelay(10);
 616         if (!sec_tb_reset) {
 617                 printk(KERN_WARNING "Timeout waiting sync on second CPU\n");
 618                 return;
 619         }
 620
 621         /* freeze the timebase and read it */
 622         /* disable interrupts so the timebase is disabled for the
 623            shortest possible time */
 624         local_irq_save(flags);
 625         pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
 626         pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
 627         mb();
 628         pri_tb_hi = get_tbu();
 629         pri_tb_lo = get_tbl();
 630         pri_tb_stamp = last_jiffy_stamp(smp_processor_id());
 631         mb();
 632
 633         /* tell the secondary we're ready */
 634         sec_tb_reset = 2;
 635         mb();
 636
 637         /* wait for the secondary to have taken it */
 638         for (t = 100000; t > 0 && sec_tb_reset; --t)
 639                 udelay(10);
 640         if (sec_tb_reset)
 641                 printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n");
 642         else
 643                 smp_tb_synchronized = 1;
 644
 645         /* Now, restart the timebase by leaving the GPIO to an open collector */
 646         pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
 647         pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
 648         local_irq_restore(flags);
 649 }
 650
 651
 652 /* PowerSurge-style Macs */
 653 struct smp_ops_t psurge_smp_ops __pmacdata = {
 654         .message_pass   = smp_psurge_message_pass,
 655         .probe          = smp_psurge_probe,
 656         .kick_cpu       = smp_psurge_kick_cpu,
 657         .setup_cpu      = smp_psurge_setup_cpu,
 658         .give_timebase  = smp_psurge_give_timebase,
 659         .take_timebase  = smp_psurge_take_timebase,
 660 };
 661
 662 /* Core99 Macs (dual G4s) */
 663 struct smp_ops_t core99_smp_ops __pmacdata = {
 664         .message_pass   = smp_openpic_message_pass,
 665         .probe          = smp_core99_probe,
 666         .kick_cpu       = smp_core99_kick_cpu,
 667         .setup_cpu      = smp_core99_setup_cpu,
 668         .give_timebase  = smp_core99_give_timebase,
 669         .take_timebase  = smp_core99_take_timebase,
 670 };