Merge master.kernel.org:/home/rmk/linux-2.6-mmc
[linux-2.6] / drivers / hwmon / w83627hf.c
1 /*
2     w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
3                 monitoring
4     Copyright (c) 1998 - 2003  Frodo Looijaard <frodol@dds.nl>,
5     Philip Edelbrock <phil@netroedge.com>,
6     and Mark Studebaker <mdsxyz123@yahoo.com>
7     Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
8
9     This program is free software; you can redistribute it and/or modify
10     it under the terms of the GNU General Public License as published by
11     the Free Software Foundation; either version 2 of the License, or
12     (at your option) any later version.
13
14     This program is distributed in the hope that it will be useful,
15     but WITHOUT ANY WARRANTY; without even the implied warranty of
16     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17     GNU General Public License for more details.
18
19     You should have received a copy of the GNU General Public License
20     along with this program; if not, write to the Free Software
21     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24 /*
25     Supports following chips:
26
27     Chip        #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
28     w83627hf    9       3       2       3       0x20    0x5ca3  no      yes(LPC)
29     w83627thf   7       3       3       3       0x90    0x5ca3  no      yes(LPC)
30     w83637hf    7       3       3       3       0x80    0x5ca3  no      yes(LPC)
31     w83697hf    8       2       2       2       0x60    0x5ca3  no      yes(LPC)
32
33     For other winbond chips, and for i2c support in the above chips,
34     use w83781d.c.
35
36     Note: automatic ("cruise") fan control for 697, 637 & 627thf not
37     supported yet.
38 */
39
40 #include <linux/module.h>
41 #include <linux/init.h>
42 #include <linux/slab.h>
43 #include <linux/jiffies.h>
44 #include <linux/i2c.h>
45 #include <linux/i2c-isa.h>
46 #include <linux/hwmon.h>
47 #include <linux/hwmon-vid.h>
48 #include <linux/err.h>
49 #include <asm/io.h>
50 #include "lm75.h"
51
52 static u16 force_addr;
53 module_param(force_addr, ushort, 0);
54 MODULE_PARM_DESC(force_addr,
55                  "Initialize the base address of the sensors");
56 static u8 force_i2c = 0x1f;
57 module_param(force_i2c, byte, 0);
58 MODULE_PARM_DESC(force_i2c,
59                  "Initialize the i2c address of the sensors");
60
61 /* The actual ISA address is read from Super-I/O configuration space */
62 static unsigned short address;
63
64 /* Insmod parameters */
65 enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf };
66
67 static int reset;
68 module_param(reset, bool, 0);
69 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
70
71 static int init = 1;
72 module_param(init, bool, 0);
73 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
74
75 /* modified from kernel/include/traps.c */
76 static int REG;         /* The register to read/write */
77 #define DEV     0x07    /* Register: Logical device select */
78 static int VAL;         /* The value to read/write */
79
80 /* logical device numbers for superio_select (below) */
81 #define W83627HF_LD_FDC         0x00
82 #define W83627HF_LD_PRT         0x01
83 #define W83627HF_LD_UART1       0x02
84 #define W83627HF_LD_UART2       0x03
85 #define W83627HF_LD_KBC         0x05
86 #define W83627HF_LD_CIR         0x06 /* w83627hf only */
87 #define W83627HF_LD_GAME        0x07
88 #define W83627HF_LD_MIDI        0x07
89 #define W83627HF_LD_GPIO1       0x07
90 #define W83627HF_LD_GPIO5       0x07 /* w83627thf only */
91 #define W83627HF_LD_GPIO2       0x08
92 #define W83627HF_LD_GPIO3       0x09
93 #define W83627HF_LD_GPIO4       0x09 /* w83627thf only */
94 #define W83627HF_LD_ACPI        0x0a
95 #define W83627HF_LD_HWM         0x0b
96
97 #define DEVID   0x20    /* Register: Device ID */
98
99 #define W83627THF_GPIO5_EN      0x30 /* w83627thf only */
100 #define W83627THF_GPIO5_IOSR    0xf3 /* w83627thf only */
101 #define W83627THF_GPIO5_DR      0xf4 /* w83627thf only */
102
103 static inline void
104 superio_outb(int reg, int val)
105 {
106         outb(reg, REG);
107         outb(val, VAL);
108 }
109
110 static inline int
111 superio_inb(int reg)
112 {
113         outb(reg, REG);
114         return inb(VAL);
115 }
116
117 static inline void
118 superio_select(int ld)
119 {
120         outb(DEV, REG);
121         outb(ld, VAL);
122 }
123
124 static inline void
125 superio_enter(void)
126 {
127         outb(0x87, REG);
128         outb(0x87, REG);
129 }
130
131 static inline void
132 superio_exit(void)
133 {
134         outb(0xAA, REG);
135 }
136
137 #define W627_DEVID 0x52
138 #define W627THF_DEVID 0x82
139 #define W697_DEVID 0x60
140 #define W637_DEVID 0x70
141 #define WINB_ACT_REG 0x30
142 #define WINB_BASE_REG 0x60
143 /* Constants specified below */
144
145 /* Alignment of the base address */
146 #define WINB_ALIGNMENT          ~7
147
148 /* Offset & size of I/O region we are interested in */
149 #define WINB_REGION_OFFSET      5
150 #define WINB_REGION_SIZE        2
151
152 /* Where are the sensors address/data registers relative to the base address */
153 #define W83781D_ADDR_REG_OFFSET 5
154 #define W83781D_DATA_REG_OFFSET 6
155
156 /* The W83781D registers */
157 /* The W83782D registers for nr=7,8 are in bank 5 */
158 #define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
159                                            (0x554 + (((nr) - 7) * 2)))
160 #define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
161                                            (0x555 + (((nr) - 7) * 2)))
162 #define W83781D_REG_IN(nr)     ((nr < 7) ? (0x20 + (nr)) : \
163                                            (0x550 + (nr) - 7))
164
165 #define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
166 #define W83781D_REG_FAN(nr) (0x27 + (nr))
167
168 #define W83781D_REG_TEMP2_CONFIG 0x152
169 #define W83781D_REG_TEMP3_CONFIG 0x252
170 #define W83781D_REG_TEMP(nr)            ((nr == 3) ? (0x0250) : \
171                                         ((nr == 2) ? (0x0150) : \
172                                                      (0x27)))
173 #define W83781D_REG_TEMP_HYST(nr)       ((nr == 3) ? (0x253) : \
174                                         ((nr == 2) ? (0x153) : \
175                                                      (0x3A)))
176 #define W83781D_REG_TEMP_OVER(nr)       ((nr == 3) ? (0x255) : \
177                                         ((nr == 2) ? (0x155) : \
178                                                      (0x39)))
179
180 #define W83781D_REG_BANK 0x4E
181
182 #define W83781D_REG_CONFIG 0x40
183 #define W83781D_REG_ALARM1 0x41
184 #define W83781D_REG_ALARM2 0x42
185 #define W83781D_REG_ALARM3 0x450
186
187 #define W83781D_REG_IRQ 0x4C
188 #define W83781D_REG_BEEP_CONFIG 0x4D
189 #define W83781D_REG_BEEP_INTS1 0x56
190 #define W83781D_REG_BEEP_INTS2 0x57
191 #define W83781D_REG_BEEP_INTS3 0x453
192
193 #define W83781D_REG_VID_FANDIV 0x47
194
195 #define W83781D_REG_CHIPID 0x49
196 #define W83781D_REG_WCHIPID 0x58
197 #define W83781D_REG_CHIPMAN 0x4F
198 #define W83781D_REG_PIN 0x4B
199
200 #define W83781D_REG_VBAT 0x5D
201
202 #define W83627HF_REG_PWM1 0x5A
203 #define W83627HF_REG_PWM2 0x5B
204
205 #define W83627THF_REG_PWM1              0x01    /* 697HF and 637HF too */
206 #define W83627THF_REG_PWM2              0x03    /* 697HF and 637HF too */
207 #define W83627THF_REG_PWM3              0x11    /* 637HF too */
208
209 #define W83627THF_REG_VRM_OVT_CFG       0x18    /* 637HF too */
210
211 static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
212 static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
213                              W83627THF_REG_PWM3 };
214 #define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
215                                      regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1])
216
217 #define W83781D_REG_I2C_ADDR 0x48
218 #define W83781D_REG_I2C_SUBADDR 0x4A
219
220 /* Sensor selection */
221 #define W83781D_REG_SCFG1 0x5D
222 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
223 #define W83781D_REG_SCFG2 0x59
224 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
225 #define W83781D_DEFAULT_BETA 3435
226
227 /* Conversions. Limit checking is only done on the TO_REG
228    variants. Note that you should be a bit careful with which arguments
229    these macros are called: arguments may be evaluated more than once.
230    Fixing this is just not worth it. */
231 #define IN_TO_REG(val)  (SENSORS_LIMIT((((val) + 8)/16),0,255))
232 #define IN_FROM_REG(val) ((val) * 16)
233
234 static inline u8 FAN_TO_REG(long rpm, int div)
235 {
236         if (rpm == 0)
237                 return 255;
238         rpm = SENSORS_LIMIT(rpm, 1, 1000000);
239         return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
240                              254);
241 }
242
243 #define TEMP_MIN (-128000)
244 #define TEMP_MAX ( 127000)
245
246 /* TEMP: 0.001C/bit (-128C to +127C)
247    REG: 1C/bit, two's complement */
248 static u8 TEMP_TO_REG(int temp)
249 {
250         int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
251         ntemp += (ntemp<0 ? -500 : 500);
252         return (u8)(ntemp / 1000);
253 }
254
255 static int TEMP_FROM_REG(u8 reg)
256 {
257         return (s8)reg * 1000;
258 }
259
260 #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
261
262 #define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
263
264 #define BEEP_MASK_FROM_REG(val)          (val)
265 #define BEEP_MASK_TO_REG(val)           ((val) & 0xffffff)
266 #define BEEP_ENABLE_TO_REG(val)         ((val)?1:0)
267 #define BEEP_ENABLE_FROM_REG(val)       ((val)?1:0)
268
269 #define DIV_FROM_REG(val) (1 << (val))
270
271 static inline u8 DIV_TO_REG(long val)
272 {
273         int i;
274         val = SENSORS_LIMIT(val, 1, 128) >> 1;
275         for (i = 0; i < 7; i++) {
276                 if (val == 0)
277                         break;
278                 val >>= 1;
279         }
280         return ((u8) i);
281 }
282
283 /* For each registered chip, we need to keep some data in memory. That
284    data is pointed to by w83627hf_list[NR]->data. The structure itself is
285    dynamically allocated, at the same time when a new client is allocated. */
286 struct w83627hf_data {
287         struct i2c_client client;
288         struct class_device *class_dev;
289         struct semaphore lock;
290         enum chips type;
291
292         struct semaphore update_lock;
293         char valid;             /* !=0 if following fields are valid */
294         unsigned long last_updated;     /* In jiffies */
295
296         struct i2c_client *lm75;        /* for secondary I2C addresses */
297         /* pointer to array of 2 subclients */
298
299         u8 in[9];               /* Register value */
300         u8 in_max[9];           /* Register value */
301         u8 in_min[9];           /* Register value */
302         u8 fan[3];              /* Register value */
303         u8 fan_min[3];          /* Register value */
304         u8 temp;
305         u8 temp_max;            /* Register value */
306         u8 temp_max_hyst;       /* Register value */
307         u16 temp_add[2];        /* Register value */
308         u16 temp_max_add[2];    /* Register value */
309         u16 temp_max_hyst_add[2]; /* Register value */
310         u8 fan_div[3];          /* Register encoding, shifted right */
311         u8 vid;                 /* Register encoding, combined */
312         u32 alarms;             /* Register encoding, combined */
313         u32 beep_mask;          /* Register encoding, combined */
314         u8 beep_enable;         /* Boolean */
315         u8 pwm[3];              /* Register value */
316         u16 sens[3];            /* 782D/783S only.
317                                    1 = pentium diode; 2 = 3904 diode;
318                                    3000-5000 = thermistor beta.
319                                    Default = 3435.
320                                    Other Betas unimplemented */
321         u8 vrm;
322         u8 vrm_ovt;             /* Register value, 627thf & 637hf only */
323 };
324
325
326 static int w83627hf_detect(struct i2c_adapter *adapter);
327 static int w83627hf_detach_client(struct i2c_client *client);
328
329 static int w83627hf_read_value(struct i2c_client *client, u16 register);
330 static int w83627hf_write_value(struct i2c_client *client, u16 register,
331                                u16 value);
332 static struct w83627hf_data *w83627hf_update_device(struct device *dev);
333 static void w83627hf_init_client(struct i2c_client *client);
334
335 static struct i2c_driver w83627hf_driver = {
336         .owner          = THIS_MODULE,
337         .name           = "w83627hf",
338         .attach_adapter = w83627hf_detect,
339         .detach_client  = w83627hf_detach_client,
340 };
341
342 /* following are the sysfs callback functions */
343 #define show_in_reg(reg) \
344 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
345 { \
346         struct w83627hf_data *data = w83627hf_update_device(dev); \
347         return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr])); \
348 }
349 show_in_reg(in)
350 show_in_reg(in_min)
351 show_in_reg(in_max)
352
353 #define store_in_reg(REG, reg) \
354 static ssize_t \
355 store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
356 { \
357         struct i2c_client *client = to_i2c_client(dev); \
358         struct w83627hf_data *data = i2c_get_clientdata(client); \
359         u32 val; \
360          \
361         val = simple_strtoul(buf, NULL, 10); \
362          \
363         down(&data->update_lock); \
364         data->in_##reg[nr] = IN_TO_REG(val); \
365         w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \
366                             data->in_##reg[nr]); \
367          \
368         up(&data->update_lock); \
369         return count; \
370 }
371 store_in_reg(MIN, min)
372 store_in_reg(MAX, max)
373
374 #define sysfs_in_offset(offset) \
375 static ssize_t \
376 show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
377 { \
378         return show_in(dev, buf, offset); \
379 } \
380 static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
381
382 #define sysfs_in_reg_offset(reg, offset) \
383 static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
384 { \
385         return show_in_##reg (dev, buf, offset); \
386 } \
387 static ssize_t \
388 store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, \
389                             const char *buf, size_t count) \
390 { \
391         return store_in_##reg (dev, buf, count, offset); \
392 } \
393 static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, \
394                   show_regs_in_##reg##offset, store_regs_in_##reg##offset);
395
396 #define sysfs_in_offsets(offset) \
397 sysfs_in_offset(offset) \
398 sysfs_in_reg_offset(min, offset) \
399 sysfs_in_reg_offset(max, offset)
400
401 sysfs_in_offsets(1);
402 sysfs_in_offsets(2);
403 sysfs_in_offsets(3);
404 sysfs_in_offsets(4);
405 sysfs_in_offsets(5);
406 sysfs_in_offsets(6);
407 sysfs_in_offsets(7);
408 sysfs_in_offsets(8);
409
410 /* use a different set of functions for in0 */
411 static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
412 {
413         long in0;
414
415         if ((data->vrm_ovt & 0x01) &&
416                 (w83627thf == data->type || w83637hf == data->type))
417
418                 /* use VRM9 calculation */
419                 in0 = (long)((reg * 488 + 70000 + 50) / 100);
420         else
421                 /* use VRM8 (standard) calculation */
422                 in0 = (long)IN_FROM_REG(reg);
423
424         return sprintf(buf,"%ld\n", in0);
425 }
426
427 static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf)
428 {
429         struct w83627hf_data *data = w83627hf_update_device(dev);
430         return show_in_0(data, buf, data->in[0]);
431 }
432
433 static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf)
434 {
435         struct w83627hf_data *data = w83627hf_update_device(dev);
436         return show_in_0(data, buf, data->in_min[0]);
437 }
438
439 static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf)
440 {
441         struct w83627hf_data *data = w83627hf_update_device(dev);
442         return show_in_0(data, buf, data->in_max[0]);
443 }
444
445 static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr,
446         const char *buf, size_t count)
447 {
448         struct i2c_client *client = to_i2c_client(dev);
449         struct w83627hf_data *data = i2c_get_clientdata(client);
450         u32 val;
451
452         val = simple_strtoul(buf, NULL, 10);
453
454         down(&data->update_lock);
455         
456         if ((data->vrm_ovt & 0x01) &&
457                 (w83627thf == data->type || w83637hf == data->type))
458
459                 /* use VRM9 calculation */
460                 data->in_min[0] = (u8)(((val * 100) - 70000 + 244) / 488);
461         else
462                 /* use VRM8 (standard) calculation */
463                 data->in_min[0] = IN_TO_REG(val);
464
465         w83627hf_write_value(client, W83781D_REG_IN_MIN(0), data->in_min[0]);
466         up(&data->update_lock);
467         return count;
468 }
469
470 static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr,
471         const char *buf, size_t count)
472 {
473         struct i2c_client *client = to_i2c_client(dev);
474         struct w83627hf_data *data = i2c_get_clientdata(client);
475         u32 val;
476
477         val = simple_strtoul(buf, NULL, 10);
478
479         down(&data->update_lock);
480
481         if ((data->vrm_ovt & 0x01) &&
482                 (w83627thf == data->type || w83637hf == data->type))
483                 
484                 /* use VRM9 calculation */
485                 data->in_max[0] = (u8)(((val * 100) - 70000 + 244) / 488);
486         else
487                 /* use VRM8 (standard) calculation */
488                 data->in_max[0] = IN_TO_REG(val);
489
490         w83627hf_write_value(client, W83781D_REG_IN_MAX(0), data->in_max[0]);
491         up(&data->update_lock);
492         return count;
493 }
494
495 static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL);
496 static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
497         show_regs_in_min0, store_regs_in_min0);
498 static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
499         show_regs_in_max0, store_regs_in_max0);
500
501 #define device_create_file_in(client, offset) \
502 do { \
503 device_create_file(&client->dev, &dev_attr_in##offset##_input); \
504 device_create_file(&client->dev, &dev_attr_in##offset##_min); \
505 device_create_file(&client->dev, &dev_attr_in##offset##_max); \
506 } while (0)
507
508 #define show_fan_reg(reg) \
509 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
510 { \
511         struct w83627hf_data *data = w83627hf_update_device(dev); \
512         return sprintf(buf,"%ld\n", \
513                 FAN_FROM_REG(data->reg[nr-1], \
514                             (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
515 }
516 show_fan_reg(fan);
517 show_fan_reg(fan_min);
518
519 static ssize_t
520 store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
521 {
522         struct i2c_client *client = to_i2c_client(dev);
523         struct w83627hf_data *data = i2c_get_clientdata(client);
524         u32 val;
525
526         val = simple_strtoul(buf, NULL, 10);
527
528         down(&data->update_lock);
529         data->fan_min[nr - 1] =
530             FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
531         w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr),
532                             data->fan_min[nr - 1]);
533
534         up(&data->update_lock);
535         return count;
536 }
537
538 #define sysfs_fan_offset(offset) \
539 static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
540 { \
541         return show_fan(dev, buf, offset); \
542 } \
543 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
544
545 #define sysfs_fan_min_offset(offset) \
546 static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \
547 { \
548         return show_fan_min(dev, buf, offset); \
549 } \
550 static ssize_t \
551 store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
552 { \
553         return store_fan_min(dev, buf, count, offset); \
554 } \
555 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
556                   show_regs_fan_min##offset, store_regs_fan_min##offset);
557
558 sysfs_fan_offset(1);
559 sysfs_fan_min_offset(1);
560 sysfs_fan_offset(2);
561 sysfs_fan_min_offset(2);
562 sysfs_fan_offset(3);
563 sysfs_fan_min_offset(3);
564
565 #define device_create_file_fan(client, offset) \
566 do { \
567 device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
568 device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
569 } while (0)
570
571 #define show_temp_reg(reg) \
572 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
573 { \
574         struct w83627hf_data *data = w83627hf_update_device(dev); \
575         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
576                 return sprintf(buf,"%ld\n", \
577                         (long)LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
578         } else {        /* TEMP1 */ \
579                 return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
580         } \
581 }
582 show_temp_reg(temp);
583 show_temp_reg(temp_max);
584 show_temp_reg(temp_max_hyst);
585
586 #define store_temp_reg(REG, reg) \
587 static ssize_t \
588 store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
589 { \
590         struct i2c_client *client = to_i2c_client(dev); \
591         struct w83627hf_data *data = i2c_get_clientdata(client); \
592         u32 val; \
593          \
594         val = simple_strtoul(buf, NULL, 10); \
595          \
596         down(&data->update_lock); \
597          \
598         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
599                 data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
600                 w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
601                                 data->temp_##reg##_add[nr-2]); \
602         } else {        /* TEMP1 */ \
603                 data->temp_##reg = TEMP_TO_REG(val); \
604                 w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
605                         data->temp_##reg); \
606         } \
607          \
608         up(&data->update_lock); \
609         return count; \
610 }
611 store_temp_reg(OVER, max);
612 store_temp_reg(HYST, max_hyst);
613
614 #define sysfs_temp_offset(offset) \
615 static ssize_t \
616 show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
617 { \
618         return show_temp(dev, buf, offset); \
619 } \
620 static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
621
622 #define sysfs_temp_reg_offset(reg, offset) \
623 static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
624 { \
625         return show_temp_##reg (dev, buf, offset); \
626 } \
627 static ssize_t \
628 store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, \
629                               const char *buf, size_t count) \
630 { \
631         return store_temp_##reg (dev, buf, count, offset); \
632 } \
633 static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
634                   show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
635
636 #define sysfs_temp_offsets(offset) \
637 sysfs_temp_offset(offset) \
638 sysfs_temp_reg_offset(max, offset) \
639 sysfs_temp_reg_offset(max_hyst, offset)
640
641 sysfs_temp_offsets(1);
642 sysfs_temp_offsets(2);
643 sysfs_temp_offsets(3);
644
645 #define device_create_file_temp(client, offset) \
646 do { \
647 device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
648 device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
649 device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
650 } while (0)
651
652 static ssize_t
653 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
654 {
655         struct w83627hf_data *data = w83627hf_update_device(dev);
656         return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
657 }
658 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
659 #define device_create_file_vid(client) \
660 device_create_file(&client->dev, &dev_attr_cpu0_vid)
661
662 static ssize_t
663 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
664 {
665         struct w83627hf_data *data = w83627hf_update_device(dev);
666         return sprintf(buf, "%ld\n", (long) data->vrm);
667 }
668 static ssize_t
669 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
670 {
671         struct i2c_client *client = to_i2c_client(dev);
672         struct w83627hf_data *data = i2c_get_clientdata(client);
673         u32 val;
674
675         val = simple_strtoul(buf, NULL, 10);
676         data->vrm = val;
677
678         return count;
679 }
680 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
681 #define device_create_file_vrm(client) \
682 device_create_file(&client->dev, &dev_attr_vrm)
683
684 static ssize_t
685 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
686 {
687         struct w83627hf_data *data = w83627hf_update_device(dev);
688         return sprintf(buf, "%ld\n", (long) data->alarms);
689 }
690 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
691 #define device_create_file_alarms(client) \
692 device_create_file(&client->dev, &dev_attr_alarms)
693
694 #define show_beep_reg(REG, reg) \
695 static ssize_t show_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
696 { \
697         struct w83627hf_data *data = w83627hf_update_device(dev); \
698         return sprintf(buf,"%ld\n", \
699                       (long)BEEP_##REG##_FROM_REG(data->beep_##reg)); \
700 }
701 show_beep_reg(ENABLE, enable)
702 show_beep_reg(MASK, mask)
703
704 #define BEEP_ENABLE                     0       /* Store beep_enable */
705 #define BEEP_MASK                       1       /* Store beep_mask */
706
707 static ssize_t
708 store_beep_reg(struct device *dev, const char *buf, size_t count,
709                int update_mask)
710 {
711         struct i2c_client *client = to_i2c_client(dev);
712         struct w83627hf_data *data = i2c_get_clientdata(client);
713         u32 val, val2;
714
715         val = simple_strtoul(buf, NULL, 10);
716
717         down(&data->update_lock);
718
719         if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
720                 data->beep_mask = BEEP_MASK_TO_REG(val);
721                 w83627hf_write_value(client, W83781D_REG_BEEP_INTS1,
722                                     data->beep_mask & 0xff);
723                 w83627hf_write_value(client, W83781D_REG_BEEP_INTS3,
724                                     ((data->beep_mask) >> 16) & 0xff);
725                 val2 = (data->beep_mask >> 8) & 0x7f;
726         } else {                /* We are storing beep_enable */
727                 val2 =
728                     w83627hf_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
729                 data->beep_enable = BEEP_ENABLE_TO_REG(val);
730         }
731
732         w83627hf_write_value(client, W83781D_REG_BEEP_INTS2,
733                             val2 | data->beep_enable << 7);
734
735         up(&data->update_lock);
736         return count;
737 }
738
739 #define sysfs_beep(REG, reg) \
740 static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
741 { \
742         return show_beep_##reg(dev, attr, buf); \
743 } \
744 static ssize_t \
745 store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
746 { \
747         return store_beep_reg(dev, buf, count, BEEP_##REG); \
748 } \
749 static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \
750                   show_regs_beep_##reg, store_regs_beep_##reg);
751
752 sysfs_beep(ENABLE, enable);
753 sysfs_beep(MASK, mask);
754
755 #define device_create_file_beep(client) \
756 do { \
757 device_create_file(&client->dev, &dev_attr_beep_enable); \
758 device_create_file(&client->dev, &dev_attr_beep_mask); \
759 } while (0)
760
761 static ssize_t
762 show_fan_div_reg(struct device *dev, char *buf, int nr)
763 {
764         struct w83627hf_data *data = w83627hf_update_device(dev);
765         return sprintf(buf, "%ld\n",
766                        (long) DIV_FROM_REG(data->fan_div[nr - 1]));
767 }
768
769 /* Note: we save and restore the fan minimum here, because its value is
770    determined in part by the fan divisor.  This follows the principle of
771    least suprise; the user doesn't expect the fan minimum to change just
772    because the divisor changed. */
773 static ssize_t
774 store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
775 {
776         struct i2c_client *client = to_i2c_client(dev);
777         struct w83627hf_data *data = i2c_get_clientdata(client);
778         unsigned long min;
779         u8 reg;
780         unsigned long val = simple_strtoul(buf, NULL, 10);
781
782         down(&data->update_lock);
783
784         /* Save fan_min */
785         min = FAN_FROM_REG(data->fan_min[nr],
786                            DIV_FROM_REG(data->fan_div[nr]));
787
788         data->fan_div[nr] = DIV_TO_REG(val);
789
790         reg = (w83627hf_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
791                & (nr==0 ? 0xcf : 0x3f))
792             | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
793         w83627hf_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
794
795         reg = (w83627hf_read_value(client, W83781D_REG_VBAT)
796                & ~(1 << (5 + nr)))
797             | ((data->fan_div[nr] & 0x04) << (3 + nr));
798         w83627hf_write_value(client, W83781D_REG_VBAT, reg);
799
800         /* Restore fan_min */
801         data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
802         w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
803
804         up(&data->update_lock);
805         return count;
806 }
807
808 #define sysfs_fan_div(offset) \
809 static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
810 { \
811         return show_fan_div_reg(dev, buf, offset); \
812 } \
813 static ssize_t \
814 store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, \
815                             const char *buf, size_t count) \
816 { \
817         return store_fan_div_reg(dev, buf, count, offset - 1); \
818 } \
819 static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
820                   show_regs_fan_div_##offset, store_regs_fan_div_##offset);
821
822 sysfs_fan_div(1);
823 sysfs_fan_div(2);
824 sysfs_fan_div(3);
825
826 #define device_create_file_fan_div(client, offset) \
827 do { \
828 device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
829 } while (0)
830
831 static ssize_t
832 show_pwm_reg(struct device *dev, char *buf, int nr)
833 {
834         struct w83627hf_data *data = w83627hf_update_device(dev);
835         return sprintf(buf, "%ld\n", (long) data->pwm[nr - 1]);
836 }
837
838 static ssize_t
839 store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
840 {
841         struct i2c_client *client = to_i2c_client(dev);
842         struct w83627hf_data *data = i2c_get_clientdata(client);
843         u32 val;
844
845         val = simple_strtoul(buf, NULL, 10);
846
847         down(&data->update_lock);
848
849         if (data->type == w83627thf) {
850                 /* bits 0-3 are reserved  in 627THF */
851                 data->pwm[nr - 1] = PWM_TO_REG(val) & 0xf0;
852                 w83627hf_write_value(client,
853                                      W836X7HF_REG_PWM(data->type, nr),
854                                      data->pwm[nr - 1] |
855                                      (w83627hf_read_value(client,
856                                      W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
857         } else {
858                 data->pwm[nr - 1] = PWM_TO_REG(val);
859                 w83627hf_write_value(client,
860                                      W836X7HF_REG_PWM(data->type, nr),
861                                      data->pwm[nr - 1]);
862         }
863
864         up(&data->update_lock);
865         return count;
866 }
867
868 #define sysfs_pwm(offset) \
869 static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
870 { \
871         return show_pwm_reg(dev, buf, offset); \
872 } \
873 static ssize_t \
874 store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
875 { \
876         return store_pwm_reg(dev, buf, count, offset); \
877 } \
878 static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
879                   show_regs_pwm_##offset, store_regs_pwm_##offset);
880
881 sysfs_pwm(1);
882 sysfs_pwm(2);
883 sysfs_pwm(3);
884
885 #define device_create_file_pwm(client, offset) \
886 do { \
887 device_create_file(&client->dev, &dev_attr_pwm##offset); \
888 } while (0)
889
890 static ssize_t
891 show_sensor_reg(struct device *dev, char *buf, int nr)
892 {
893         struct w83627hf_data *data = w83627hf_update_device(dev);
894         return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
895 }
896
897 static ssize_t
898 store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
899 {
900         struct i2c_client *client = to_i2c_client(dev);
901         struct w83627hf_data *data = i2c_get_clientdata(client);
902         u32 val, tmp;
903
904         val = simple_strtoul(buf, NULL, 10);
905
906         down(&data->update_lock);
907
908         switch (val) {
909         case 1:         /* PII/Celeron diode */
910                 tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
911                 w83627hf_write_value(client, W83781D_REG_SCFG1,
912                                     tmp | BIT_SCFG1[nr - 1]);
913                 tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
914                 w83627hf_write_value(client, W83781D_REG_SCFG2,
915                                     tmp | BIT_SCFG2[nr - 1]);
916                 data->sens[nr - 1] = val;
917                 break;
918         case 2:         /* 3904 */
919                 tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
920                 w83627hf_write_value(client, W83781D_REG_SCFG1,
921                                     tmp | BIT_SCFG1[nr - 1]);
922                 tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
923                 w83627hf_write_value(client, W83781D_REG_SCFG2,
924                                     tmp & ~BIT_SCFG2[nr - 1]);
925                 data->sens[nr - 1] = val;
926                 break;
927         case W83781D_DEFAULT_BETA:      /* thermistor */
928                 tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
929                 w83627hf_write_value(client, W83781D_REG_SCFG1,
930                                     tmp & ~BIT_SCFG1[nr - 1]);
931                 data->sens[nr - 1] = val;
932                 break;
933         default:
934                 dev_err(&client->dev,
935                        "Invalid sensor type %ld; must be 1, 2, or %d\n",
936                        (long) val, W83781D_DEFAULT_BETA);
937                 break;
938         }
939
940         up(&data->update_lock);
941         return count;
942 }
943
944 #define sysfs_sensor(offset) \
945 static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
946 { \
947     return show_sensor_reg(dev, buf, offset); \
948 } \
949 static ssize_t \
950 store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
951 { \
952     return store_sensor_reg(dev, buf, count, offset); \
953 } \
954 static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
955                   show_regs_sensor_##offset, store_regs_sensor_##offset);
956
957 sysfs_sensor(1);
958 sysfs_sensor(2);
959 sysfs_sensor(3);
960
961 #define device_create_file_sensor(client, offset) \
962 do { \
963 device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
964 } while (0)
965
966
967 static int __init w83627hf_find(int sioaddr, unsigned short *addr)
968 {
969         u16 val;
970
971         REG = sioaddr;
972         VAL = sioaddr + 1;
973
974         superio_enter();
975         val= superio_inb(DEVID);
976         if(val != W627_DEVID &&
977            val != W627THF_DEVID &&
978            val != W697_DEVID &&
979            val != W637_DEVID) {
980                 superio_exit();
981                 return -ENODEV;
982         }
983
984         superio_select(W83627HF_LD_HWM);
985         val = (superio_inb(WINB_BASE_REG) << 8) |
986                superio_inb(WINB_BASE_REG + 1);
987         *addr = val & WINB_ALIGNMENT;
988         if (*addr == 0 && force_addr == 0) {
989                 superio_exit();
990                 return -ENODEV;
991         }
992
993         superio_exit();
994         return 0;
995 }
996
997 static int w83627hf_detect(struct i2c_adapter *adapter)
998 {
999         int val, kind;
1000         struct i2c_client *new_client;
1001         struct w83627hf_data *data;
1002         int err = 0;
1003         const char *client_name = "";
1004
1005         if(force_addr)
1006                 address = force_addr & WINB_ALIGNMENT;
1007
1008         if (!request_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE,
1009                             w83627hf_driver.name)) {
1010                 err = -EBUSY;
1011                 goto ERROR0;
1012         }
1013
1014         if(force_addr) {
1015                 printk("w83627hf.o: forcing ISA address 0x%04X\n", address);
1016                 superio_enter();
1017                 superio_select(W83627HF_LD_HWM);
1018                 superio_outb(WINB_BASE_REG, address >> 8);
1019                 superio_outb(WINB_BASE_REG+1, address & 0xff);
1020                 superio_exit();
1021         }
1022
1023         superio_enter();
1024         val= superio_inb(DEVID);
1025         if(val == W627_DEVID)
1026                 kind = w83627hf;
1027         else if(val == W697_DEVID)
1028                 kind = w83697hf;
1029         else if(val == W627THF_DEVID)
1030                 kind = w83627thf;
1031         else if(val == W637_DEVID)
1032                 kind = w83637hf;
1033         else {
1034                 dev_info(&adapter->dev,
1035                          "Unsupported chip (dev_id=0x%02X).\n", val);
1036                 goto ERROR1;
1037         }
1038
1039         superio_select(W83627HF_LD_HWM);
1040         if((val = 0x01 & superio_inb(WINB_ACT_REG)) == 0)
1041                 superio_outb(WINB_ACT_REG, 1);
1042         superio_exit();
1043
1044         /* OK. For now, we presume we have a valid client. We now create the
1045            client structure, even though we cannot fill it completely yet.
1046            But it allows us to access w83627hf_{read,write}_value. */
1047
1048         if (!(data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
1049                 err = -ENOMEM;
1050                 goto ERROR1;
1051         }
1052
1053         new_client = &data->client;
1054         i2c_set_clientdata(new_client, data);
1055         new_client->addr = address;
1056         init_MUTEX(&data->lock);
1057         new_client->adapter = adapter;
1058         new_client->driver = &w83627hf_driver;
1059         new_client->flags = 0;
1060
1061
1062         if (kind == w83627hf) {
1063                 client_name = "w83627hf";
1064         } else if (kind == w83627thf) {
1065                 client_name = "w83627thf";
1066         } else if (kind == w83697hf) {
1067                 client_name = "w83697hf";
1068         } else if (kind == w83637hf) {
1069                 client_name = "w83637hf";
1070         }
1071
1072         /* Fill in the remaining client fields and put into the global list */
1073         strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
1074         data->type = kind;
1075         data->valid = 0;
1076         init_MUTEX(&data->update_lock);
1077
1078         /* Tell the I2C layer a new client has arrived */
1079         if ((err = i2c_attach_client(new_client)))
1080                 goto ERROR2;
1081
1082         data->lm75 = NULL;
1083
1084         /* Initialize the chip */
1085         w83627hf_init_client(new_client);
1086
1087         /* A few vars need to be filled upon startup */
1088         data->fan_min[0] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(1));
1089         data->fan_min[1] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(2));
1090         data->fan_min[2] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(3));
1091
1092         /* Register sysfs hooks */
1093         data->class_dev = hwmon_device_register(&new_client->dev);
1094         if (IS_ERR(data->class_dev)) {
1095                 err = PTR_ERR(data->class_dev);
1096                 goto ERROR3;
1097         }
1098
1099         device_create_file_in(new_client, 0);
1100         if (kind != w83697hf)
1101                 device_create_file_in(new_client, 1);
1102         device_create_file_in(new_client, 2);
1103         device_create_file_in(new_client, 3);
1104         device_create_file_in(new_client, 4);
1105         if (kind != w83627thf && kind != w83637hf) {
1106                 device_create_file_in(new_client, 5);
1107                 device_create_file_in(new_client, 6);
1108         }
1109         device_create_file_in(new_client, 7);
1110         device_create_file_in(new_client, 8);
1111
1112         device_create_file_fan(new_client, 1);
1113         device_create_file_fan(new_client, 2);
1114         if (kind != w83697hf)
1115                 device_create_file_fan(new_client, 3);
1116
1117         device_create_file_temp(new_client, 1);
1118         device_create_file_temp(new_client, 2);
1119         if (kind != w83697hf)
1120                 device_create_file_temp(new_client, 3);
1121
1122         if (kind != w83697hf)
1123                 device_create_file_vid(new_client);
1124
1125         if (kind != w83697hf)
1126                 device_create_file_vrm(new_client);
1127
1128         device_create_file_fan_div(new_client, 1);
1129         device_create_file_fan_div(new_client, 2);
1130         if (kind != w83697hf)
1131                 device_create_file_fan_div(new_client, 3);
1132
1133         device_create_file_alarms(new_client);
1134
1135         device_create_file_beep(new_client);
1136
1137         device_create_file_pwm(new_client, 1);
1138         device_create_file_pwm(new_client, 2);
1139         if (kind == w83627thf || kind == w83637hf)
1140                 device_create_file_pwm(new_client, 3);
1141
1142         device_create_file_sensor(new_client, 1);
1143         device_create_file_sensor(new_client, 2);
1144         if (kind != w83697hf)
1145                 device_create_file_sensor(new_client, 3);
1146
1147         return 0;
1148
1149       ERROR3:
1150         i2c_detach_client(new_client);
1151       ERROR2:
1152         kfree(data);
1153       ERROR1:
1154         release_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE);
1155       ERROR0:
1156         return err;
1157 }
1158
1159 static int w83627hf_detach_client(struct i2c_client *client)
1160 {
1161         struct w83627hf_data *data = i2c_get_clientdata(client);
1162         int err;
1163
1164         hwmon_device_unregister(data->class_dev);
1165
1166         if ((err = i2c_detach_client(client)))
1167                 return err;
1168
1169         release_region(client->addr + WINB_REGION_OFFSET, WINB_REGION_SIZE);
1170         kfree(data);
1171
1172         return 0;
1173 }
1174
1175
1176 /*
1177    ISA access must always be locked explicitly!
1178    We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1179    would slow down the W83781D access and should not be necessary.
1180    There are some ugly typecasts here, but the good news is - they should
1181    nowhere else be necessary! */
1182 static int w83627hf_read_value(struct i2c_client *client, u16 reg)
1183 {
1184         struct w83627hf_data *data = i2c_get_clientdata(client);
1185         int res, word_sized;
1186
1187         down(&data->lock);
1188         word_sized = (((reg & 0xff00) == 0x100)
1189                    || ((reg & 0xff00) == 0x200))
1190                   && (((reg & 0x00ff) == 0x50)
1191                    || ((reg & 0x00ff) == 0x53)
1192                    || ((reg & 0x00ff) == 0x55));
1193         if (reg & 0xff00) {
1194                 outb_p(W83781D_REG_BANK,
1195                        client->addr + W83781D_ADDR_REG_OFFSET);
1196                 outb_p(reg >> 8,
1197                        client->addr + W83781D_DATA_REG_OFFSET);
1198         }
1199         outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
1200         res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
1201         if (word_sized) {
1202                 outb_p((reg & 0xff) + 1,
1203                        client->addr + W83781D_ADDR_REG_OFFSET);
1204                 res =
1205                     (res << 8) + inb_p(client->addr +
1206                                        W83781D_DATA_REG_OFFSET);
1207         }
1208         if (reg & 0xff00) {
1209                 outb_p(W83781D_REG_BANK,
1210                        client->addr + W83781D_ADDR_REG_OFFSET);
1211                 outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
1212         }
1213         up(&data->lock);
1214         return res;
1215 }
1216
1217 static int w83627thf_read_gpio5(struct i2c_client *client)
1218 {
1219         int res = 0xff, sel;
1220
1221         superio_enter();
1222         superio_select(W83627HF_LD_GPIO5);
1223
1224         /* Make sure these GPIO pins are enabled */
1225         if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) {
1226                 dev_dbg(&client->dev, "GPIO5 disabled, no VID function\n");
1227                 goto exit;
1228         }
1229
1230         /* Make sure the pins are configured for input
1231            There must be at least five (VRM 9), and possibly 6 (VRM 10) */
1232         sel = superio_inb(W83627THF_GPIO5_IOSR);
1233         if ((sel & 0x1f) != 0x1f) {
1234                 dev_dbg(&client->dev, "GPIO5 not configured for VID "
1235                         "function\n");
1236                 goto exit;
1237         }
1238
1239         dev_info(&client->dev, "Reading VID from GPIO5\n");
1240         res = superio_inb(W83627THF_GPIO5_DR) & sel;
1241
1242 exit:
1243         superio_exit();
1244         return res;
1245 }
1246
1247 static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value)
1248 {
1249         struct w83627hf_data *data = i2c_get_clientdata(client);
1250         int word_sized;
1251
1252         down(&data->lock);
1253         word_sized = (((reg & 0xff00) == 0x100)
1254                    || ((reg & 0xff00) == 0x200))
1255                   && (((reg & 0x00ff) == 0x53)
1256                    || ((reg & 0x00ff) == 0x55));
1257         if (reg & 0xff00) {
1258                 outb_p(W83781D_REG_BANK,
1259                        client->addr + W83781D_ADDR_REG_OFFSET);
1260                 outb_p(reg >> 8,
1261                        client->addr + W83781D_DATA_REG_OFFSET);
1262         }
1263         outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
1264         if (word_sized) {
1265                 outb_p(value >> 8,
1266                        client->addr + W83781D_DATA_REG_OFFSET);
1267                 outb_p((reg & 0xff) + 1,
1268                        client->addr + W83781D_ADDR_REG_OFFSET);
1269         }
1270         outb_p(value & 0xff,
1271                client->addr + W83781D_DATA_REG_OFFSET);
1272         if (reg & 0xff00) {
1273                 outb_p(W83781D_REG_BANK,
1274                        client->addr + W83781D_ADDR_REG_OFFSET);
1275                 outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
1276         }
1277         up(&data->lock);
1278         return 0;
1279 }
1280
1281 static void w83627hf_init_client(struct i2c_client *client)
1282 {
1283         struct w83627hf_data *data = i2c_get_clientdata(client);
1284         int i;
1285         int type = data->type;
1286         u8 tmp;
1287
1288         if (reset) {
1289                 /* Resetting the chip has been the default for a long time,
1290                    but repeatedly caused problems (fans going to full
1291                    speed...) so it is now optional. It might even go away if
1292                    nobody reports it as being useful, as I see very little
1293                    reason why this would be needed at all. */
1294                 dev_info(&client->dev, "If reset=1 solved a problem you were "
1295                          "having, please report!\n");
1296
1297                 /* save this register */
1298                 i = w83627hf_read_value(client, W83781D_REG_BEEP_CONFIG);
1299                 /* Reset all except Watchdog values and last conversion values
1300                    This sets fan-divs to 2, among others */
1301                 w83627hf_write_value(client, W83781D_REG_CONFIG, 0x80);
1302                 /* Restore the register and disable power-on abnormal beep.
1303                    This saves FAN 1/2/3 input/output values set by BIOS. */
1304                 w83627hf_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
1305                 /* Disable master beep-enable (reset turns it on).
1306                    Individual beeps should be reset to off but for some reason
1307                    disabling this bit helps some people not get beeped */
1308                 w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, 0);
1309         }
1310
1311         /* Minimize conflicts with other winbond i2c-only clients...  */
1312         /* disable i2c subclients... how to disable main i2c client?? */
1313         /* force i2c address to relatively uncommon address */
1314         w83627hf_write_value(client, W83781D_REG_I2C_SUBADDR, 0x89);
1315         w83627hf_write_value(client, W83781D_REG_I2C_ADDR, force_i2c);
1316
1317         /* Read VID only once */
1318         if (w83627hf == data->type || w83637hf == data->type) {
1319                 int lo = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
1320                 int hi = w83627hf_read_value(client, W83781D_REG_CHIPID);
1321                 data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
1322         } else if (w83627thf == data->type) {
1323                 data->vid = w83627thf_read_gpio5(client) & 0x3f;
1324         }
1325
1326         /* Read VRM & OVT Config only once */
1327         if (w83627thf == data->type || w83637hf == data->type) {
1328                 data->vrm_ovt = 
1329                         w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG);
1330                 data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82;
1331         } else {
1332                 /* Convert VID to voltage based on default VRM */
1333                 data->vrm = vid_which_vrm();
1334         }
1335
1336         tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
1337         for (i = 1; i <= 3; i++) {
1338                 if (!(tmp & BIT_SCFG1[i - 1])) {
1339                         data->sens[i - 1] = W83781D_DEFAULT_BETA;
1340                 } else {
1341                         if (w83627hf_read_value
1342                             (client,
1343                              W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1344                                 data->sens[i - 1] = 1;
1345                         else
1346                                 data->sens[i - 1] = 2;
1347                 }
1348                 if ((type == w83697hf) && (i == 2))
1349                         break;
1350         }
1351
1352         if(init) {
1353                 /* Enable temp2 */
1354                 tmp = w83627hf_read_value(client, W83781D_REG_TEMP2_CONFIG);
1355                 if (tmp & 0x01) {
1356                         dev_warn(&client->dev, "Enabling temp2, readings "
1357                                  "might not make sense\n");
1358                         w83627hf_write_value(client, W83781D_REG_TEMP2_CONFIG,
1359                                 tmp & 0xfe);
1360                 }
1361
1362                 /* Enable temp3 */
1363                 if (type != w83697hf) {
1364                         tmp = w83627hf_read_value(client,
1365                                 W83781D_REG_TEMP3_CONFIG);
1366                         if (tmp & 0x01) {
1367                                 dev_warn(&client->dev, "Enabling temp3, "
1368                                          "readings might not make sense\n");
1369                                 w83627hf_write_value(client,
1370                                         W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1371                         }
1372                 }
1373
1374                 /* enable comparator mode for temp2 and temp3 so
1375                    alarm indication will work correctly */
1376                 i = w83627hf_read_value(client, W83781D_REG_IRQ);
1377                 if (!(i & 0x40))
1378                         w83627hf_write_value(client, W83781D_REG_IRQ,
1379                                             i | 0x40);
1380         }
1381
1382         /* Start monitoring */
1383         w83627hf_write_value(client, W83781D_REG_CONFIG,
1384                             (w83627hf_read_value(client,
1385                                                 W83781D_REG_CONFIG) & 0xf7)
1386                             | 0x01);
1387 }
1388
1389 static struct w83627hf_data *w83627hf_update_device(struct device *dev)
1390 {
1391         struct i2c_client *client = to_i2c_client(dev);
1392         struct w83627hf_data *data = i2c_get_clientdata(client);
1393         int i;
1394
1395         down(&data->update_lock);
1396
1397         if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1398             || !data->valid) {
1399                 for (i = 0; i <= 8; i++) {
1400                         /* skip missing sensors */
1401                         if (((data->type == w83697hf) && (i == 1)) ||
1402                             ((data->type == w83627thf || data->type == w83637hf)
1403                             && (i == 4 || i == 5)))
1404                                 continue;
1405                         data->in[i] =
1406                             w83627hf_read_value(client, W83781D_REG_IN(i));
1407                         data->in_min[i] =
1408                             w83627hf_read_value(client,
1409                                                W83781D_REG_IN_MIN(i));
1410                         data->in_max[i] =
1411                             w83627hf_read_value(client,
1412                                                W83781D_REG_IN_MAX(i));
1413                 }
1414                 for (i = 1; i <= 3; i++) {
1415                         data->fan[i - 1] =
1416                             w83627hf_read_value(client, W83781D_REG_FAN(i));
1417                         data->fan_min[i - 1] =
1418                             w83627hf_read_value(client,
1419                                                W83781D_REG_FAN_MIN(i));
1420                 }
1421                 for (i = 1; i <= 3; i++) {
1422                         u8 tmp = w83627hf_read_value(client,
1423                                 W836X7HF_REG_PWM(data->type, i));
1424                         /* bits 0-3 are reserved  in 627THF */
1425                         if (data->type == w83627thf)
1426                                 tmp &= 0xf0;
1427                         data->pwm[i - 1] = tmp;
1428                         if(i == 2 &&
1429                            (data->type == w83627hf || data->type == w83697hf))
1430                                 break;
1431                 }
1432
1433                 data->temp = w83627hf_read_value(client, W83781D_REG_TEMP(1));
1434                 data->temp_max =
1435                     w83627hf_read_value(client, W83781D_REG_TEMP_OVER(1));
1436                 data->temp_max_hyst =
1437                     w83627hf_read_value(client, W83781D_REG_TEMP_HYST(1));
1438                 data->temp_add[0] =
1439                     w83627hf_read_value(client, W83781D_REG_TEMP(2));
1440                 data->temp_max_add[0] =
1441                     w83627hf_read_value(client, W83781D_REG_TEMP_OVER(2));
1442                 data->temp_max_hyst_add[0] =
1443                     w83627hf_read_value(client, W83781D_REG_TEMP_HYST(2));
1444                 if (data->type != w83697hf) {
1445                         data->temp_add[1] =
1446                           w83627hf_read_value(client, W83781D_REG_TEMP(3));
1447                         data->temp_max_add[1] =
1448                           w83627hf_read_value(client, W83781D_REG_TEMP_OVER(3));
1449                         data->temp_max_hyst_add[1] =
1450                           w83627hf_read_value(client, W83781D_REG_TEMP_HYST(3));
1451                 }
1452
1453                 i = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
1454                 data->fan_div[0] = (i >> 4) & 0x03;
1455                 data->fan_div[1] = (i >> 6) & 0x03;
1456                 if (data->type != w83697hf) {
1457                         data->fan_div[2] = (w83627hf_read_value(client,
1458                                                W83781D_REG_PIN) >> 6) & 0x03;
1459                 }
1460                 i = w83627hf_read_value(client, W83781D_REG_VBAT);
1461                 data->fan_div[0] |= (i >> 3) & 0x04;
1462                 data->fan_div[1] |= (i >> 4) & 0x04;
1463                 if (data->type != w83697hf)
1464                         data->fan_div[2] |= (i >> 5) & 0x04;
1465                 data->alarms =
1466                     w83627hf_read_value(client, W83781D_REG_ALARM1) |
1467                     (w83627hf_read_value(client, W83781D_REG_ALARM2) << 8) |
1468                     (w83627hf_read_value(client, W83781D_REG_ALARM3) << 16);
1469                 i = w83627hf_read_value(client, W83781D_REG_BEEP_INTS2);
1470                 data->beep_enable = i >> 7;
1471                 data->beep_mask = ((i & 0x7f) << 8) |
1472                     w83627hf_read_value(client, W83781D_REG_BEEP_INTS1) |
1473                     w83627hf_read_value(client, W83781D_REG_BEEP_INTS3) << 16;
1474                 data->last_updated = jiffies;
1475                 data->valid = 1;
1476         }
1477
1478         up(&data->update_lock);
1479
1480         return data;
1481 }
1482
1483 static int __init sensors_w83627hf_init(void)
1484 {
1485         if (w83627hf_find(0x2e, &address)
1486          && w83627hf_find(0x4e, &address)) {
1487                 return -ENODEV;
1488         }
1489
1490         return i2c_isa_add_driver(&w83627hf_driver);
1491 }
1492
1493 static void __exit sensors_w83627hf_exit(void)
1494 {
1495         i2c_isa_del_driver(&w83627hf_driver);
1496 }
1497
1498 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
1499               "Philip Edelbrock <phil@netroedge.com>, "
1500               "and Mark Studebaker <mdsxyz123@yahoo.com>");
1501 MODULE_DESCRIPTION("W83627HF driver");
1502 MODULE_LICENSE("GPL");
1503
1504 module_init(sensors_w83627hf_init);
1505 module_exit(sensors_w83627hf_exit);