git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/sysdev/todc.c

   1 /*
   2  * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818
   3  * Real Time Clocks/Timekeepers.
   4  *
   5  * Author: Mark A. Greer <mgreer@mvista.com>
   6  *
   7  * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
   8  * the terms of the GNU General Public License version 2.  This program
   9  * is licensed "as is" without any warranty of any kind, whether express
  10  * or implied.
  11  */
  12 #include <linux/errno.h>
  13 #include <linux/init.h>
  14 #include <linux/kernel.h>
  15 #include <linux/time.h>
  16 #include <linux/timex.h>
  17 #include <linux/bcd.h>
  18 #include <linux/mc146818rtc.h>
  19
  20 #include <asm/machdep.h>
  21 #include <asm/io.h>
  22 #include <asm/time.h>
  23 #include <asm/todc.h>
  24
  25 /*
  26  * Depending on the hardware on your board and your board design, the
  27  * RTC/NVRAM may be accessed either directly (like normal memory) or via
  28  * address/data registers.  If your board uses the direct method, set
  29  * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and
  30  * 'nvram_as1' NULL.  If your board uses address/data regs to access nvram,
  31  * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the
  32  * address of the upper byte (leave NULL if using mc146818), and set
  33  * 'nvram_data' to the address of the 8-bit data register.
  34  *
  35  * Note: Even though the documentation for the various RTC chips say that it
  36  *       take up to a second before it starts updating once the 'R' bit is
  37  *       cleared, they always seem to update even though we bang on it many
  38  *       times a second.  This is true, except for the Dallas Semi 1746/1747
  39  *       (possibly others).  Those chips seem to have a real problem whenever
  40  *       we set the 'R' bit before reading them, they basically stop counting.
  41  *                                              --MAG
  42  */
  43
  44 /*
  45  * 'todc_info' should be initialized in your *_setup.c file to
  46  * point to a fully initialized 'todc_info_t' structure.
  47  * This structure holds all the register offsets for your particular
  48  * TODC/RTC chip.
  49  * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you.
  50  */
  51
  52 #ifdef  RTC_FREQ_SELECT
  53 #undef  RTC_FREQ_SELECT
  54 #define RTC_FREQ_SELECT         control_b       /* Register A */
  55 #endif
  56
  57 #ifdef  RTC_CONTROL
  58 #undef  RTC_CONTROL
  59 #define RTC_CONTROL             control_a       /* Register B */
  60 #endif
  61
  62 #ifdef  RTC_INTR_FLAGS
  63 #undef  RTC_INTR_FLAGS
  64 #define RTC_INTR_FLAGS          watchdog        /* Register C */
  65 #endif
  66
  67 #ifdef  RTC_VALID
  68 #undef  RTC_VALID
  69 #define RTC_VALID               interrupts      /* Register D */
  70 #endif
  71
  72 /* Access routines when RTC accessed directly (like normal memory) */
  73 u_char
  74 todc_direct_read_val(int addr)
  75 {
  76         return readb((void __iomem *)(todc_info->nvram_data + addr));
  77 }
  78
  79 void
  80 todc_direct_write_val(int addr, unsigned char val)
  81 {
  82         writeb(val, (void __iomem *)(todc_info->nvram_data + addr));
  83         return;
  84 }
  85
  86 /* Access routines for accessing m48txx type chips via addr/data regs */
  87 u_char
  88 todc_m48txx_read_val(int addr)
  89 {
  90         outb(addr, todc_info->nvram_as0);
  91         outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
  92         return inb(todc_info->nvram_data);
  93 }
  94
  95 void
  96 todc_m48txx_write_val(int addr, unsigned char val)
  97 {
  98         outb(addr, todc_info->nvram_as0);
  99         outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
 100         outb(val, todc_info->nvram_data);
 101         return;
 102 }
 103
 104 /* Access routines for accessing mc146818 type chips via addr/data regs */
 105 u_char
 106 todc_mc146818_read_val(int addr)
 107 {
 108         outb_p(addr, todc_info->nvram_as0);
 109         return inb_p(todc_info->nvram_data);
 110 }
 111
 112 void
 113 todc_mc146818_write_val(int addr, unsigned char val)
 114 {
 115         outb_p(addr, todc_info->nvram_as0);
 116         outb_p(val, todc_info->nvram_data);
 117 }
 118
 119
 120 /*
 121  * Routines to make RTC chips with NVRAM buried behind an addr/data pair
 122  * have the NVRAM and clock regs appear at the same level.
 123  * The NVRAM will appear to start at addr 0 and the clock regs will appear
 124  * to start immediately after the NVRAM (actually, start at offset
 125  * todc_info->nvram_size).
 126  */
 127 static inline u_char
 128 todc_read_val(int addr)
 129 {
 130         u_char  val;
 131
 132         if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
 133                 if (addr < todc_info->nvram_size) { /* NVRAM */
 134                         ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
 135                         val = ppc_md.rtc_read_val(todc_info->nvram_data_reg);
 136                 } else { /* Clock Reg */
 137                         addr -= todc_info->nvram_size;
 138                         val = ppc_md.rtc_read_val(addr);
 139                 }
 140         } else
 141                 val = ppc_md.rtc_read_val(addr);
 142
 143         return val;
 144 }
 145
 146 static inline void
 147 todc_write_val(int addr, u_char val)
 148 {
 149         if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
 150                 if (addr < todc_info->nvram_size) { /* NVRAM */
 151                         ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
 152                         ppc_md.rtc_write_val(todc_info->nvram_data_reg, val);
 153                 } else { /* Clock Reg */
 154                         addr -= todc_info->nvram_size;
 155                         ppc_md.rtc_write_val(addr, val);
 156                 }
 157         } else
 158                 ppc_md.rtc_write_val(addr, val);
 159 }
 160
 161 /*
 162  * TODC routines
 163  *
 164  * There is some ugly stuff in that there are assumptions for the mc146818.
 165  *
 166  * Assumptions:
 167  *      - todc_info->control_a has the offset as mc146818 Register B reg
 168  *      - todc_info->control_b has the offset as mc146818 Register A reg
 169  *      - m48txx control reg's write enable or 'W' bit is same as
 170  *        mc146818 Register B 'SET' bit (i.e., 0x80)
 171  *
 172  * These assumptions were made to make the code simpler.
 173  */
 174 long __init
 175 todc_time_init(void)
 176 {
 177         u_char  cntl_b;
 178
 179         if (!ppc_md.rtc_read_val)
 180                 ppc_md.rtc_read_val = ppc_md.nvram_read_val;
 181         if (!ppc_md.rtc_write_val)
 182                 ppc_md.rtc_write_val = ppc_md.nvram_write_val;
 183
 184         cntl_b = todc_read_val(todc_info->control_b);
 185
 186         if (todc_info->rtc_type == TODC_TYPE_MC146818) {
 187                 if ((cntl_b & 0x70) != 0x20) {
 188                         printk(KERN_INFO "TODC real-time-clock was stopped."
 189                                 "  Now starting...");
 190                         cntl_b &= ~0x70;
 191                         cntl_b |= 0x20;
 192                 }
 193
 194                 todc_write_val(todc_info->control_b, cntl_b);
 195         } else if (todc_info->rtc_type == TODC_TYPE_DS17285) {
 196                 u_char mode;
 197
 198                 mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A);
 199                 /* Make sure countdown clear is not set */
 200                 mode &= ~0x40;
 201                 /* Enable oscillator, extended register set */
 202                 mode |= 0x30;
 203                 todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode);
 204
 205         } else if (todc_info->rtc_type == TODC_TYPE_DS1501) {
 206                 u_char  month;
 207
 208                 todc_info->enable_read = TODC_DS1501_CNTL_B_TE;
 209                 todc_info->enable_write = TODC_DS1501_CNTL_B_TE;
 210
 211                 month = todc_read_val(todc_info->month);
 212
 213                 if ((month & 0x80) == 0x80) {
 214                         printk(KERN_INFO "TODC %s %s\n",
 215                                 "real-time-clock was stopped.",
 216                                 "Now starting...");
 217                         month &= ~0x80;
 218                         todc_write_val(todc_info->month, month);
 219                 }
 220
 221                 cntl_b &= ~TODC_DS1501_CNTL_B_TE;
 222                 todc_write_val(todc_info->control_b, cntl_b);
 223         } else { /* must be a m48txx type */
 224                 u_char  cntl_a;
 225
 226                 todc_info->enable_read = TODC_MK48TXX_CNTL_A_R;
 227                 todc_info->enable_write = TODC_MK48TXX_CNTL_A_W;
 228
 229                 cntl_a = todc_read_val(todc_info->control_a);
 230
 231                 /* Check & clear STOP bit in control B register */
 232                 if (cntl_b & TODC_MK48TXX_DAY_CB) {
 233                         printk(KERN_INFO "TODC %s %s\n",
 234                                 "real-time-clock was stopped.",
 235                                 "Now starting...");
 236
 237                         cntl_a |= todc_info->enable_write;
 238                         cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */
 239
 240                         todc_write_val(todc_info->control_a, cntl_a);
 241                         todc_write_val(todc_info->control_b, cntl_b);
 242                 }
 243
 244                 /* Make sure READ & WRITE bits are cleared. */
 245                 cntl_a &= ~(todc_info->enable_write | todc_info->enable_read);
 246                 todc_write_val(todc_info->control_a, cntl_a);
 247         }
 248
 249         return 0;
 250 }
 251
 252 /*
 253  * There is some ugly stuff in that there are assumptions that for a mc146818,
 254  * the todc_info->control_a has the offset of the mc146818 Register B reg and
 255  * that the register'ss 'SET' bit is the same as the m48txx's write enable
 256  * bit in the control register of the m48txx (i.e., 0x80).
 257  *
 258  * It was done to make the code look simpler.
 259  */
 260 void
 261 todc_get_rtc_time(struct rtc_time *tm)
 262 {
 263         uint    year = 0, mon = 0, mday = 0, hour = 0, min = 0, sec = 0;
 264         uint    limit, i;
 265         u_char  save_control, uip = 0;
 266         extern void GregorianDay(struct rtc_time *);
 267
 268         spin_lock(&rtc_lock);
 269         save_control = todc_read_val(todc_info->control_a);
 270
 271         if (todc_info->rtc_type != TODC_TYPE_MC146818) {
 272                 limit = 1;
 273
 274                 switch (todc_info->rtc_type) {
 275                 case TODC_TYPE_DS1553:
 276                 case TODC_TYPE_DS1557:
 277                 case TODC_TYPE_DS1743:
 278                 case TODC_TYPE_DS1746:  /* XXXX BAD HACK -> FIX */
 279                 case TODC_TYPE_DS1747:
 280                 case TODC_TYPE_DS17285:
 281                         break;
 282                 default:
 283                         todc_write_val(todc_info->control_a,
 284                                 (save_control | todc_info->enable_read));
 285                 }
 286         } else
 287                 limit = 100000000;
 288
 289         for (i=0; i<limit; i++) {
 290                 if (todc_info->rtc_type == TODC_TYPE_MC146818)
 291                         uip = todc_read_val(todc_info->RTC_FREQ_SELECT);
 292
 293                 sec = todc_read_val(todc_info->seconds) & 0x7f;
 294                 min = todc_read_val(todc_info->minutes) & 0x7f;
 295                 hour = todc_read_val(todc_info->hours) & 0x3f;
 296                 mday = todc_read_val(todc_info->day_of_month) & 0x3f;
 297                 mon = todc_read_val(todc_info->month) & 0x1f;
 298                 year = todc_read_val(todc_info->year) & 0xff;
 299
 300                 if (todc_info->rtc_type == TODC_TYPE_MC146818) {
 301                         uip |= todc_read_val(todc_info->RTC_FREQ_SELECT);
 302                         if ((uip & RTC_UIP) == 0)
 303                                 break;
 304                 }
 305         }
 306
 307         if (todc_info->rtc_type != TODC_TYPE_MC146818) {
 308                 switch (todc_info->rtc_type) {
 309                 case TODC_TYPE_DS1553:
 310                 case TODC_TYPE_DS1557:
 311                 case TODC_TYPE_DS1743:
 312                 case TODC_TYPE_DS1746:  /* XXXX BAD HACK -> FIX */
 313                 case TODC_TYPE_DS1747:
 314                 case TODC_TYPE_DS17285:
 315                         break;
 316                 default:
 317                         save_control &= ~(todc_info->enable_read);
 318                         todc_write_val(todc_info->control_a, save_control);
 319                 }
 320         }
 321         spin_unlock(&rtc_lock);
 322
 323         if ((todc_info->rtc_type != TODC_TYPE_MC146818)
 324                         || ((save_control & RTC_DM_BINARY) == 0)
 325                         || RTC_ALWAYS_BCD) {
 326                 BCD_TO_BIN(sec);
 327                 BCD_TO_BIN(min);
 328                 BCD_TO_BIN(hour);
 329                 BCD_TO_BIN(mday);
 330                 BCD_TO_BIN(mon);
 331                 BCD_TO_BIN(year);
 332         }
 333
 334         if ((year + 1900) < 1970) {
 335                 year += 100;
 336         }
 337
 338         tm->tm_sec = sec;
 339         tm->tm_min = min;
 340         tm->tm_hour = hour;
 341         tm->tm_mday = mday;
 342         tm->tm_mon = mon;
 343         tm->tm_year = year;
 344
 345         GregorianDay(tm);
 346 }
 347
 348 int
 349 todc_set_rtc_time(struct rtc_time *tm)
 350 {
 351         u_char save_control, save_freq_select = 0;
 352
 353         spin_lock(&rtc_lock);
 354         save_control = todc_read_val(todc_info->control_a);
 355
 356         /* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */
 357         todc_write_val(todc_info->control_a,
 358                 (save_control | todc_info->enable_write));
 359         save_control &= ~(todc_info->enable_write); /* in case it was set */
 360
 361         if (todc_info->rtc_type == TODC_TYPE_MC146818) {
 362                 save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT);
 363                 todc_write_val(todc_info->RTC_FREQ_SELECT,
 364                         save_freq_select | RTC_DIV_RESET2);
 365         }
 366
 367         if ((todc_info->rtc_type != TODC_TYPE_MC146818)
 368                         || ((save_control & RTC_DM_BINARY) == 0)
 369                         || RTC_ALWAYS_BCD) {
 370                 BIN_TO_BCD(tm->tm_sec);
 371                 BIN_TO_BCD(tm->tm_min);
 372                 BIN_TO_BCD(tm->tm_hour);
 373                 BIN_TO_BCD(tm->tm_mon);
 374                 BIN_TO_BCD(tm->tm_mday);
 375                 BIN_TO_BCD(tm->tm_year);
 376         }
 377
 378         todc_write_val(todc_info->seconds, tm->tm_sec);
 379         todc_write_val(todc_info->minutes, tm->tm_min);
 380         todc_write_val(todc_info->hours, tm->tm_hour);
 381         todc_write_val(todc_info->month, tm->tm_mon);
 382         todc_write_val(todc_info->day_of_month, tm->tm_mday);
 383         todc_write_val(todc_info->year, tm->tm_year);
 384
 385         todc_write_val(todc_info->control_a, save_control);
 386
 387         if (todc_info->rtc_type == TODC_TYPE_MC146818)
 388                 todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select);
 389
 390         spin_unlock(&rtc_lock);
 391         return 0;
 392 }