[PATCH] ahci: clean up AHCI constants in preparation for NCQ
[linux-2.6] / drivers / scsi / dec_esp.c
1 /*
2  * dec_esp.c: Driver for SCSI chips on IOASIC based TURBOchannel DECstations
3  *            and TURBOchannel PMAZ-A cards
4  *
5  * TURBOchannel changes by Harald Koerfgen
6  * PMAZ-A support by David Airlie
7  *
8  * based on jazz_esp.c:
9  * Copyright (C) 1997 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
10  *
11  * jazz_esp is based on David S. Miller's ESP driver and cyber_esp
12  *
13  * 20000819 - Small PMAZ-AA fixes by Florian Lohoff <flo@rfc822.org>
14  *            Be warned the PMAZ-AA works currently as a single card.
15  *            Dont try to put multiple cards in one machine - They are
16  *            both detected but it may crash under high load garbling your
17  *            data.
18  * 20001005     - Initialization fixes for 2.4.0-test9
19  *                        Florian Lohoff <flo@rfc822.org>
20  *
21  *      Copyright (C) 2002, 2003, 2005  Maciej W. Rozycki
22  */
23
24 #include <linux/kernel.h>
25 #include <linux/delay.h>
26 #include <linux/types.h>
27 #include <linux/string.h>
28 #include <linux/slab.h>
29 #include <linux/blkdev.h>
30 #include <linux/proc_fs.h>
31 #include <linux/spinlock.h>
32 #include <linux/stat.h>
33
34 #include <asm/dma.h>
35 #include <asm/irq.h>
36 #include <asm/pgtable.h>
37 #include <asm/system.h>
38
39 #include <asm/dec/interrupts.h>
40 #include <asm/dec/ioasic.h>
41 #include <asm/dec/ioasic_addrs.h>
42 #include <asm/dec/ioasic_ints.h>
43 #include <asm/dec/machtype.h>
44 #include <asm/dec/system.h>
45 #include <asm/dec/tc.h>
46
47 #define DEC_SCSI_SREG 0
48 #define DEC_SCSI_DMAREG 0x40000
49 #define DEC_SCSI_SRAM 0x80000
50 #define DEC_SCSI_DIAG 0xC0000
51
52 #include "scsi.h"
53 #include <scsi/scsi_host.h>
54 #include "NCR53C9x.h"
55
56 static int  dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
57 static void dma_drain(struct NCR_ESP *esp);
58 static int  dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp);
59 static void dma_dump_state(struct NCR_ESP *esp);
60 static void dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length);
61 static void dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length);
62 static void dma_ints_off(struct NCR_ESP *esp);
63 static void dma_ints_on(struct NCR_ESP *esp);
64 static int  dma_irq_p(struct NCR_ESP *esp);
65 static int  dma_ports_p(struct NCR_ESP *esp);
66 static void dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write);
67 static void dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp);
68 static void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, struct scsi_cmnd * sp);
69 static void dma_advance_sg(struct scsi_cmnd * sp);
70
71 static void pmaz_dma_drain(struct NCR_ESP *esp);
72 static void pmaz_dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length);
73 static void pmaz_dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length);
74 static void pmaz_dma_ints_off(struct NCR_ESP *esp);
75 static void pmaz_dma_ints_on(struct NCR_ESP *esp);
76 static void pmaz_dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write);
77 static void pmaz_dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp);
78
79 #define TC_ESP_RAM_SIZE 0x20000
80 #define ESP_TGT_DMA_SIZE ((TC_ESP_RAM_SIZE/7) & ~(sizeof(int)-1))
81 #define ESP_NCMD 7
82
83 #define TC_ESP_DMAR_MASK  0x1ffff
84 #define TC_ESP_DMAR_WRITE 0x80000000
85 #define TC_ESP_DMA_ADDR(x) ((unsigned)(x) & TC_ESP_DMAR_MASK)
86
87 u32 esp_virt_buffer;
88 int scsi_current_length;
89
90 volatile unsigned char cmd_buffer[16];
91 volatile unsigned char pmaz_cmd_buffer[16];
92                                 /* This is where all commands are put
93                                  * before they are trasfered to the ESP chip
94                                  * via PIO.
95                                  */
96
97 static irqreturn_t scsi_dma_merr_int(int, void *, struct pt_regs *);
98 static irqreturn_t scsi_dma_err_int(int, void *, struct pt_regs *);
99 static irqreturn_t scsi_dma_int(int, void *, struct pt_regs *);
100
101 static int dec_esp_detect(struct scsi_host_template * tpnt);
102
103 static int dec_esp_release(struct Scsi_Host *shost)
104 {
105         if (shost->irq)
106                 free_irq(shost->irq, NULL);
107         if (shost->io_port && shost->n_io_port)
108                 release_region(shost->io_port, shost->n_io_port);
109         scsi_unregister(shost);
110         return 0;
111 }
112
113 static struct scsi_host_template driver_template = {
114         .proc_name              = "dec_esp",
115         .proc_info              = esp_proc_info,
116         .name                   = "NCR53C94",
117         .detect                 = dec_esp_detect,
118         .slave_alloc            = esp_slave_alloc,
119         .slave_destroy          = esp_slave_destroy,
120         .release                = dec_esp_release,
121         .info                   = esp_info,
122         .queuecommand           = esp_queue,
123         .eh_abort_handler       = esp_abort,
124         .eh_bus_reset_handler   = esp_reset,
125         .can_queue              = 7,
126         .this_id                = 7,
127         .sg_tablesize           = SG_ALL,
128         .cmd_per_lun            = 1,
129         .use_clustering         = DISABLE_CLUSTERING,
130 };
131
132
133 #include "scsi_module.c"
134
135 /***************************************************************** Detection */
136 static int dec_esp_detect(struct scsi_host_template * tpnt)
137 {
138         struct NCR_ESP *esp;
139         struct ConfigDev *esp_dev;
140         int slot;
141         unsigned long mem_start;
142
143         if (IOASIC) {
144                 esp_dev = 0;
145                 esp = esp_allocate(tpnt, (void *) esp_dev);
146
147                 /* Do command transfer with programmed I/O */
148                 esp->do_pio_cmds = 1;
149
150                 /* Required functions */
151                 esp->dma_bytes_sent = &dma_bytes_sent;
152                 esp->dma_can_transfer = &dma_can_transfer;
153                 esp->dma_dump_state = &dma_dump_state;
154                 esp->dma_init_read = &dma_init_read;
155                 esp->dma_init_write = &dma_init_write;
156                 esp->dma_ints_off = &dma_ints_off;
157                 esp->dma_ints_on = &dma_ints_on;
158                 esp->dma_irq_p = &dma_irq_p;
159                 esp->dma_ports_p = &dma_ports_p;
160                 esp->dma_setup = &dma_setup;
161
162                 /* Optional functions */
163                 esp->dma_barrier = 0;
164                 esp->dma_drain = &dma_drain;
165                 esp->dma_invalidate = 0;
166                 esp->dma_irq_entry = 0;
167                 esp->dma_irq_exit = 0;
168                 esp->dma_poll = 0;
169                 esp->dma_reset = 0;
170                 esp->dma_led_off = 0;
171                 esp->dma_led_on = 0;
172
173                 /* virtual DMA functions */
174                 esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one;
175                 esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl;
176                 esp->dma_mmu_release_scsi_one = 0;
177                 esp->dma_mmu_release_scsi_sgl = 0;
178                 esp->dma_advance_sg = &dma_advance_sg;
179
180
181                 /* SCSI chip speed */
182                 esp->cfreq = 25000000;
183
184                 esp->dregs = 0;
185
186                 /* ESP register base */
187                 esp->eregs = (void *)CKSEG1ADDR(dec_kn_slot_base +
188                                                 IOASIC_SCSI);
189
190                 /* Set the command buffer */
191                 esp->esp_command = (volatile unsigned char *) cmd_buffer;
192
193                 /* get virtual dma address for command buffer */
194                 esp->esp_command_dvma = virt_to_phys(cmd_buffer);
195
196                 esp->irq = dec_interrupt[DEC_IRQ_ASC];
197
198                 esp->scsi_id = 7;
199
200                 /* Check for differential SCSI-bus */
201                 esp->diff = 0;
202
203                 esp_initialize(esp);
204
205                 if (request_irq(esp->irq, esp_intr, SA_INTERRUPT,
206                                 "ncr53c94", esp->ehost))
207                         goto err_dealloc;
208                 if (request_irq(dec_interrupt[DEC_IRQ_ASC_MERR],
209                                 scsi_dma_merr_int, SA_INTERRUPT,
210                                 "ncr53c94 error", esp->ehost))
211                         goto err_free_irq;
212                 if (request_irq(dec_interrupt[DEC_IRQ_ASC_ERR],
213                                 scsi_dma_err_int, SA_INTERRUPT,
214                                 "ncr53c94 overrun", esp->ehost))
215                         goto err_free_irq_merr;
216                 if (request_irq(dec_interrupt[DEC_IRQ_ASC_DMA],
217                                 scsi_dma_int, SA_INTERRUPT,
218                                 "ncr53c94 dma", esp->ehost))
219                         goto err_free_irq_err;
220
221         }
222
223         if (TURBOCHANNEL) {
224                 while ((slot = search_tc_card("PMAZ-AA")) >= 0) {
225                         claim_tc_card(slot);
226
227                         esp_dev = 0;
228                         esp = esp_allocate(tpnt, (void *) esp_dev);
229
230                         mem_start = get_tc_base_addr(slot);
231
232                         /* Store base addr into esp struct */
233                         esp->slot = CPHYSADDR(mem_start);
234
235                         esp->dregs = 0;
236                         esp->eregs = (void *)CKSEG1ADDR(mem_start +
237                                                         DEC_SCSI_SREG);
238                         esp->do_pio_cmds = 1;
239
240                         /* Set the command buffer */
241                         esp->esp_command = (volatile unsigned char *) pmaz_cmd_buffer;
242
243                         /* get virtual dma address for command buffer */
244                         esp->esp_command_dvma = virt_to_phys(pmaz_cmd_buffer);
245
246                         esp->cfreq = get_tc_speed();
247
248                         esp->irq = get_tc_irq_nr(slot);
249
250                         /* Required functions */
251                         esp->dma_bytes_sent = &dma_bytes_sent;
252                         esp->dma_can_transfer = &dma_can_transfer;
253                         esp->dma_dump_state = &dma_dump_state;
254                         esp->dma_init_read = &pmaz_dma_init_read;
255                         esp->dma_init_write = &pmaz_dma_init_write;
256                         esp->dma_ints_off = &pmaz_dma_ints_off;
257                         esp->dma_ints_on = &pmaz_dma_ints_on;
258                         esp->dma_irq_p = &dma_irq_p;
259                         esp->dma_ports_p = &dma_ports_p;
260                         esp->dma_setup = &pmaz_dma_setup;
261
262                         /* Optional functions */
263                         esp->dma_barrier = 0;
264                         esp->dma_drain = &pmaz_dma_drain;
265                         esp->dma_invalidate = 0;
266                         esp->dma_irq_entry = 0;
267                         esp->dma_irq_exit = 0;
268                         esp->dma_poll = 0;
269                         esp->dma_reset = 0;
270                         esp->dma_led_off = 0;
271                         esp->dma_led_on = 0;
272
273                         esp->dma_mmu_get_scsi_one = pmaz_dma_mmu_get_scsi_one;
274                         esp->dma_mmu_get_scsi_sgl = 0;
275                         esp->dma_mmu_release_scsi_one = 0;
276                         esp->dma_mmu_release_scsi_sgl = 0;
277                         esp->dma_advance_sg = 0;
278
279                         if (request_irq(esp->irq, esp_intr, SA_INTERRUPT,
280                                          "PMAZ_AA", esp->ehost)) {
281                                 esp_deallocate(esp);
282                                 release_tc_card(slot);
283                                 continue;
284                         }
285                         esp->scsi_id = 7;
286                         esp->diff = 0;
287                         esp_initialize(esp);
288                 }
289         }
290
291         if(nesps) {
292                 printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
293                 esps_running = esps_in_use;
294                 return esps_in_use;
295         }
296         return 0;
297
298 err_free_irq_err:
299         free_irq(dec_interrupt[DEC_IRQ_ASC_ERR], scsi_dma_err_int);
300 err_free_irq_merr:
301         free_irq(dec_interrupt[DEC_IRQ_ASC_MERR], scsi_dma_merr_int);
302 err_free_irq:
303         free_irq(esp->irq, esp_intr);
304 err_dealloc:
305         esp_deallocate(esp);
306         return 0;
307 }
308
309 /************************************************************* DMA Functions */
310 static irqreturn_t scsi_dma_merr_int(int irq, void *dev_id, struct pt_regs *regs)
311 {
312         printk("Got unexpected SCSI DMA Interrupt! < ");
313         printk("SCSI_DMA_MEMRDERR ");
314         printk(">\n");
315
316         return IRQ_HANDLED;
317 }
318
319 static irqreturn_t scsi_dma_err_int(int irq, void *dev_id, struct pt_regs *regs)
320 {
321         /* empty */
322
323         return IRQ_HANDLED;
324 }
325
326 static irqreturn_t scsi_dma_int(int irq, void *dev_id, struct pt_regs *regs)
327 {
328         u32 scsi_next_ptr;
329
330         scsi_next_ptr = ioasic_read(IO_REG_SCSI_DMA_P);
331
332         /* next page */
333         scsi_next_ptr = (((scsi_next_ptr >> 3) + PAGE_SIZE) & PAGE_MASK) << 3;
334         ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr);
335         fast_iob();
336
337         return IRQ_HANDLED;
338 }
339
340 static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
341 {
342         return fifo_count;
343 }
344
345 static void dma_drain(struct NCR_ESP *esp)
346 {
347         u32 nw, data0, data1, scsi_data_ptr;
348         u16 *p;
349
350         nw = ioasic_read(IO_REG_SCSI_SCR);
351
352         /*
353          * Is there something in the dma buffers left?
354          */
355         if (nw) {
356                 scsi_data_ptr = ioasic_read(IO_REG_SCSI_DMA_P) >> 3;
357                 p = phys_to_virt(scsi_data_ptr);
358                 switch (nw) {
359                 case 1:
360                         data0 = ioasic_read(IO_REG_SCSI_SDR0);
361                         p[0] = data0 & 0xffff;
362                         break;
363                 case 2:
364                         data0 = ioasic_read(IO_REG_SCSI_SDR0);
365                         p[0] = data0 & 0xffff;
366                         p[1] = (data0 >> 16) & 0xffff;
367                         break;
368                 case 3:
369                         data0 = ioasic_read(IO_REG_SCSI_SDR0);
370                         data1 = ioasic_read(IO_REG_SCSI_SDR1);
371                         p[0] = data0 & 0xffff;
372                         p[1] = (data0 >> 16) & 0xffff;
373                         p[2] = data1 & 0xffff;
374                         break;
375                 default:
376                         printk("Strange: %d words in dma buffer left\n", nw);
377                         break;
378                 }
379         }
380 }
381
382 static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd * sp)
383 {
384         return sp->SCp.this_residual;
385 }
386
387 static void dma_dump_state(struct NCR_ESP *esp)
388 {
389 }
390
391 static void dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length)
392 {
393         u32 scsi_next_ptr, ioasic_ssr;
394         unsigned long flags;
395
396         if (vaddress & 3)
397                 panic("dec_esp.c: unable to handle partial word transfers, yet...");
398
399         dma_cache_wback_inv((unsigned long) phys_to_virt(vaddress), length);
400
401         spin_lock_irqsave(&ioasic_ssr_lock, flags);
402
403         fast_mb();
404         ioasic_ssr = ioasic_read(IO_REG_SSR);
405
406         ioasic_ssr &= ~IO_SSR_SCSI_DMA_EN;
407         ioasic_write(IO_REG_SSR, ioasic_ssr);
408
409         fast_wmb();
410         ioasic_write(IO_REG_SCSI_SCR, 0);
411         ioasic_write(IO_REG_SCSI_DMA_P, vaddress << 3);
412
413         /* prepare for next page */
414         scsi_next_ptr = ((vaddress + PAGE_SIZE) & PAGE_MASK) << 3;
415         ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr);
416
417         ioasic_ssr |= (IO_SSR_SCSI_DMA_DIR | IO_SSR_SCSI_DMA_EN);
418         fast_wmb();
419         ioasic_write(IO_REG_SSR, ioasic_ssr);
420
421         fast_iob();
422         spin_unlock_irqrestore(&ioasic_ssr_lock, flags);
423 }
424
425 static void dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length)
426 {
427         u32 scsi_next_ptr, ioasic_ssr;
428         unsigned long flags;
429
430         if (vaddress & 3)
431                 panic("dec_esp.c: unable to handle partial word transfers, yet...");
432
433         dma_cache_wback_inv((unsigned long) phys_to_virt(vaddress), length);
434
435         spin_lock_irqsave(&ioasic_ssr_lock, flags);
436
437         fast_mb();
438         ioasic_ssr = ioasic_read(IO_REG_SSR);
439
440         ioasic_ssr &= ~(IO_SSR_SCSI_DMA_DIR | IO_SSR_SCSI_DMA_EN);
441         ioasic_write(IO_REG_SSR, ioasic_ssr);
442
443         fast_wmb();
444         ioasic_write(IO_REG_SCSI_SCR, 0);
445         ioasic_write(IO_REG_SCSI_DMA_P, vaddress << 3);
446
447         /* prepare for next page */
448         scsi_next_ptr = ((vaddress + PAGE_SIZE) & PAGE_MASK) << 3;
449         ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr);
450
451         ioasic_ssr |= IO_SSR_SCSI_DMA_EN;
452         fast_wmb();
453         ioasic_write(IO_REG_SSR, ioasic_ssr);
454
455         fast_iob();
456         spin_unlock_irqrestore(&ioasic_ssr_lock, flags);
457 }
458
459 static void dma_ints_off(struct NCR_ESP *esp)
460 {
461         disable_irq(dec_interrupt[DEC_IRQ_ASC_DMA]);
462 }
463
464 static void dma_ints_on(struct NCR_ESP *esp)
465 {
466         enable_irq(dec_interrupt[DEC_IRQ_ASC_DMA]);
467 }
468
469 static int dma_irq_p(struct NCR_ESP *esp)
470 {
471         return (esp->eregs->esp_status & ESP_STAT_INTR);
472 }
473
474 static int dma_ports_p(struct NCR_ESP *esp)
475 {
476         /*
477          * FIXME: what's this good for?
478          */
479         return 1;
480 }
481
482 static void dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write)
483 {
484         /*
485          * DMA_ST_WRITE means "move data from device to memory"
486          * so when (write) is true, it actually means READ!
487          */
488         if (write)
489                 dma_init_read(esp, addr, count);
490         else
491                 dma_init_write(esp, addr, count);
492 }
493
494 static void dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp)
495 {
496         sp->SCp.ptr = (char *)virt_to_phys(sp->request_buffer);
497 }
498
499 static void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, struct scsi_cmnd * sp)
500 {
501         int sz = sp->SCp.buffers_residual;
502         struct scatterlist *sg = sp->SCp.buffer;
503
504         while (sz >= 0) {
505                 sg[sz].dma_address = page_to_phys(sg[sz].page) + sg[sz].offset;
506                 sz--;
507         }
508         sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address);
509 }
510
511 static void dma_advance_sg(struct scsi_cmnd * sp)
512 {
513         sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address);
514 }
515
516 static void pmaz_dma_drain(struct NCR_ESP *esp)
517 {
518         memcpy(phys_to_virt(esp_virt_buffer),
519                (void *)CKSEG1ADDR(esp->slot + DEC_SCSI_SRAM +
520                                   ESP_TGT_DMA_SIZE),
521                scsi_current_length);
522 }
523
524 static void pmaz_dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length)
525 {
526         volatile u32 *dmareg =
527                 (volatile u32 *)CKSEG1ADDR(esp->slot + DEC_SCSI_DMAREG);
528
529         if (length > ESP_TGT_DMA_SIZE)
530                 length = ESP_TGT_DMA_SIZE;
531
532         *dmareg = TC_ESP_DMA_ADDR(ESP_TGT_DMA_SIZE);
533
534         iob();
535
536         esp_virt_buffer = vaddress;
537         scsi_current_length = length;
538 }
539
540 static void pmaz_dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length)
541 {
542         volatile u32 *dmareg =
543                 (volatile u32 *)CKSEG1ADDR(esp->slot + DEC_SCSI_DMAREG);
544
545         memcpy((void *)CKSEG1ADDR(esp->slot + DEC_SCSI_SRAM +
546                                   ESP_TGT_DMA_SIZE),
547                phys_to_virt(vaddress), length);
548
549         wmb();
550         *dmareg = TC_ESP_DMAR_WRITE | TC_ESP_DMA_ADDR(ESP_TGT_DMA_SIZE);
551
552         iob();
553 }
554
555 static void pmaz_dma_ints_off(struct NCR_ESP *esp)
556 {
557 }
558
559 static void pmaz_dma_ints_on(struct NCR_ESP *esp)
560 {
561 }
562
563 static void pmaz_dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write)
564 {
565         /*
566          * DMA_ST_WRITE means "move data from device to memory"
567          * so when (write) is true, it actually means READ!
568          */
569         if (write)
570                 pmaz_dma_init_read(esp, addr, count);
571         else
572                 pmaz_dma_init_write(esp, addr, count);
573 }
574
575 static void pmaz_dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp)
576 {
577         sp->SCp.ptr = (char *)virt_to_phys(sp->request_buffer);
578 }