2 * Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved.
3 * Authors: Carsten Langgaard <carstenl@mips.com>
4 * Maciej W. Rozycki <macro@mips.com>
6 * ########################################################################
8 * This program is free software; you can distribute it and/or modify it
9 * under the terms of the GNU General Public License (Version 2) as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, write to the Free Software Foundation, Inc.,
19 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
21 * ########################################################################
23 * SAA9730 ethernet driver description.
30 /* Number of 6-byte entries in the CAM. */
31 #define LAN_SAA9730_CAM_ENTRIES 10
32 #define LAN_SAA9730_CAM_DWORDS ((LAN_SAA9730_CAM_ENTRIES*6)/4)
34 /* TX and RX packet size: fixed to 2048 bytes, according to HW requirements. */
35 #define LAN_SAA9730_PACKET_SIZE 2048
38 * Number of TX buffers = number of RX buffers = 2, which is fixed according
41 #define LAN_SAA9730_BUFFERS 2
43 /* Number of RX packets per RX buffer. */
44 #define LAN_SAA9730_RCV_Q_SIZE 15
46 /* Number of TX packets per TX buffer. */
47 #define LAN_SAA9730_TXM_Q_SIZE 15
50 * We get an interrupt for each LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
52 * If however we receive less than LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
53 * packets, the hardware can timeout after a certain time and still tell
54 * us packets have arrived.
55 * The timeout value in unit of 32 PCI clocks (33Mhz).
56 * The value 200 approximates 0.0002 seconds.
58 #define LAN_SAA9730_RCV_Q_INT_THRESHOLD 1
59 #define LAN_SAA9730_DEFAULT_TIME_OUT_CNT 10
69 #define LANEND_LITTLE 0
70 #define LANEND_BIG_2143 1
71 #define LANEND_BIG_4321 2
78 #define MACCM_AUTOMATIC 0
83 * PHY definitions for Basic registers of QS6612 (used on MIPS ATLAS board)
85 #define PHY_CONTROL 0x0
86 #define PHY_STATUS 0x1
87 #define PHY_STATUS_LINK_UP 0x4
88 #define PHY_CONTROL_RESET 0x8000
89 #define PHY_CONTROL_AUTO_NEG 0x1000
90 #define PHY_CONTROL_RESTART_AUTO_NEG 0x0200
91 #define PHY_ADDRESS 0x0
93 /* PK_COUNT register. */
94 #define PK_COUNT_TX_A_SHF 24
95 #define PK_COUNT_TX_A_MSK (0xff << PK_COUNT_TX_A_SHF)
96 #define PK_COUNT_TX_B_SHF 16
97 #define PK_COUNT_TX_B_MSK (0xff << PK_COUNT_TX_B_SHF)
98 #define PK_COUNT_RX_A_SHF 8
99 #define PK_COUNT_RX_A_MSK (0xff << PK_COUNT_RX_A_SHF)
100 #define PK_COUNT_RX_B_SHF 0
101 #define PK_COUNT_RX_B_MSK (0xff << PK_COUNT_RX_B_SHF)
103 /* OK2USE register. */
104 #define OK2USE_TX_A 0x8
105 #define OK2USE_TX_B 0x4
106 #define OK2USE_RX_A 0x2
107 #define OK2USE_RX_B 0x1
109 /* LAN DMA CONTROL register. */
110 #define DMA_CTL_BLK_INT 0x80000000
111 #define DMA_CTL_MAX_XFER_SHF 18
112 #define DMA_CTL_MAX_XFER_MSK (0x3 << LAN_DMA_CTL_MAX_XFER_SHF)
113 #define DMA_CTL_ENDIAN_SHF 16
114 #define DMA_CTL_ENDIAN_MSK (0x3 << LAN_DMA_CTL_ENDIAN_SHF)
115 #define DMA_CTL_RX_INT_COUNT_SHF 8
116 #define DMA_CTL_RX_INT_COUNT_MSK (0xff << LAN_DMA_CTL_RX_INT_COUNT_SHF)
117 #define DMA_CTL_EN_TX_DMA 0x00000080
118 #define DMA_CTL_EN_RX_DMA 0x00000040
119 #define DMA_CTL_RX_INT_BUFFUL_EN 0x00000020
120 #define DMA_CTL_RX_INT_TO_EN 0x00000010
121 #define DMA_CTL_RX_INT_EN 0x00000008
122 #define DMA_CTL_TX_INT_EN 0x00000004
123 #define DMA_CTL_MAC_TX_INT_EN 0x00000002
124 #define DMA_CTL_MAC_RX_INT_EN 0x00000001
126 /* DMA STATUS register. */
127 #define DMA_STATUS_BAD_ADDR_SHF 16
128 #define DMA_STATUS_BAD_ADDR_MSK (0xf << DMA_STATUS_BAD_ADDR_SHF)
129 #define DMA_STATUS_RX_PKTS_RECEIVED_SHF 8
130 #define DMA_STATUS_RX_PKTS_RECEIVED_MSK (0xff << DMA_STATUS_RX_PKTS_RECEIVED_SHF)
131 #define DMA_STATUS_TX_EN_SYNC 0x00000080
132 #define DMA_STATUS_RX_BUF_A_FUL 0x00000040
133 #define DMA_STATUS_RX_BUF_B_FUL 0x00000020
134 #define DMA_STATUS_RX_TO_INT 0x00000010
135 #define DMA_STATUS_RX_INT 0x00000008
136 #define DMA_STATUS_TX_INT 0x00000004
137 #define DMA_STATUS_MAC_TX_INT 0x00000002
138 #define DMA_STATUS_MAC_RX_INT 0x00000001
140 /* DMA TEST/PANIC SWITHES register. */
141 #define DMA_TEST_LOOPBACK 0x01000000
142 #define DMA_TEST_SW_RESET 0x00000001
144 /* MAC CONTROL register. */
145 #define MAC_CONTROL_EN_MISS_ROLL 0x00002000
146 #define MAC_CONTROL_MISS_ROLL 0x00000400
147 #define MAC_CONTROL_LOOP10 0x00000080
148 #define MAC_CONTROL_CONN_SHF 5
149 #define MAC_CONTROL_CONN_MSK (0x3 << MAC_CONTROL_CONN_SHF)
150 #define MAC_CONTROL_MAC_LOOP 0x00000010
151 #define MAC_CONTROL_FULL_DUP 0x00000008
152 #define MAC_CONTROL_RESET 0x00000004
153 #define MAC_CONTROL_HALT_IMM 0x00000002
154 #define MAC_CONTROL_HALT_REQ 0x00000001
156 /* CAM CONTROL register. */
157 #define CAM_CONTROL_COMP_EN 0x00000010
158 #define CAM_CONTROL_NEG_CAM 0x00000008
159 #define CAM_CONTROL_BROAD_ACC 0x00000004
160 #define CAM_CONTROL_GROUP_ACC 0x00000002
161 #define CAM_CONTROL_STATION_ACC 0x00000001
163 /* TRANSMIT CONTROL register. */
164 #define TX_CTL_EN_COMP 0x00004000
165 #define TX_CTL_EN_TX_PAR 0x00002000
166 #define TX_CTL_EN_LATE_COLL 0x00001000
167 #define TX_CTL_EN_EX_COLL 0x00000800
168 #define TX_CTL_EN_L_CARR 0x00000400
169 #define TX_CTL_EN_EX_DEFER 0x00000200
170 #define TX_CTL_EN_UNDER 0x00000100
171 #define TX_CTL_MII10 0x00000080
172 #define TX_CTL_SD_PAUSE 0x00000040
173 #define TX_CTL_NO_EX_DEF0 0x00000020
174 #define TX_CTL_F_BACK 0x00000010
175 #define TX_CTL_NO_CRC 0x00000008
176 #define TX_CTL_NO_PAD 0x00000004
177 #define TX_CTL_TX_HALT 0x00000002
178 #define TX_CTL_TX_EN 0x00000001
180 /* TRANSMIT STATUS register. */
181 #define TX_STATUS_SQ_ERR 0x00010000
182 #define TX_STATUS_TX_HALTED 0x00008000
183 #define TX_STATUS_COMP 0x00004000
184 #define TX_STATUS_TX_PAR 0x00002000
185 #define TX_STATUS_LATE_COLL 0x00001000
186 #define TX_STATUS_TX10_STAT 0x00000800
187 #define TX_STATUS_L_CARR 0x00000400
188 #define TX_STATUS_EX_DEFER 0x00000200
189 #define TX_STATUS_UNDER 0x00000100
190 #define TX_STATUS_IN_TX 0x00000080
191 #define TX_STATUS_PAUSED 0x00000040
192 #define TX_STATUS_TX_DEFERRED 0x00000020
193 #define TX_STATUS_EX_COLL 0x00000010
194 #define TX_STATUS_TX_COLL_SHF 0
195 #define TX_STATUS_TX_COLL_MSK (0xf << TX_STATUS_TX_COLL_SHF)
197 /* RECEIVE CONTROL register. */
198 #define RX_CTL_EN_GOOD 0x00004000
199 #define RX_CTL_EN_RX_PAR 0x00002000
200 #define RX_CTL_EN_LONG_ERR 0x00000800
201 #define RX_CTL_EN_OVER 0x00000400
202 #define RX_CTL_EN_CRC_ERR 0x00000200
203 #define RX_CTL_EN_ALIGN 0x00000100
204 #define RX_CTL_IGNORE_CRC 0x00000040
205 #define RX_CTL_PASS_CTL 0x00000020
206 #define RX_CTL_STRIP_CRC 0x00000010
207 #define RX_CTL_SHORT_EN 0x00000008
208 #define RX_CTL_LONG_EN 0x00000004
209 #define RX_CTL_RX_HALT 0x00000002
210 #define RX_CTL_RX_EN 0x00000001
212 /* RECEIVE STATUS register. */
213 #define RX_STATUS_RX_HALTED 0x00008000
214 #define RX_STATUS_GOOD 0x00004000
215 #define RX_STATUS_RX_PAR 0x00002000
216 #define RX_STATUS_LONG_ERR 0x00000800
217 #define RX_STATUS_OVERFLOW 0x00000400
218 #define RX_STATUS_CRC_ERR 0x00000200
219 #define RX_STATUS_ALIGN_ERR 0x00000100
220 #define RX_STATUS_RX10_STAT 0x00000080
221 #define RX_STATUS_INT_RX 0x00000040
222 #define RX_STATUS_CTL_RECD 0x00000020
224 /* MD_CA register. */
225 #define MD_CA_PRE_SUP 0x00001000
226 #define MD_CA_BUSY 0x00000800
227 #define MD_CA_WR 0x00000400
228 #define MD_CA_PHY_SHF 5
229 #define MD_CA_PHY_MSK (0x1f << MD_CA_PHY_SHF)
230 #define MD_CA_ADDR_SHF 0
231 #define MD_CA_ADDR_MSK (0x1f << MD_CA_ADDR_SHF)
233 /* Tx Status/Control. */
234 #define TX_STAT_CTL_OWNER_SHF 30
235 #define TX_STAT_CTL_OWNER_MSK (0x3 << TX_STAT_CTL_OWNER_SHF)
236 #define TX_STAT_CTL_FRAME_SHF 27
237 #define TX_STAT_CTL_FRAME_MSK (0x7 << TX_STAT_CTL_FRAME_SHF)
238 #define TX_STAT_CTL_STATUS_SHF 11
239 #define TX_STAT_CTL_STATUS_MSK (0x1ffff << TX_STAT_CTL_STATUS_SHF)
240 #define TX_STAT_CTL_LENGTH_SHF 0
241 #define TX_STAT_CTL_LENGTH_MSK (0x7ff << TX_STAT_CTL_LENGTH_SHF)
243 #define TX_STAT_CTL_ERROR_MSK ((TX_STATUS_SQ_ERR | \
244 TX_STATUS_TX_HALTED | \
246 TX_STATUS_LATE_COLL | \
248 TX_STATUS_EX_DEFER | \
251 TX_STATUS_TX_DEFERRED | \
252 TX_STATUS_EX_COLL | \
253 TX_STATUS_TX_COLL_MSK) \
254 << TX_STAT_CTL_STATUS_SHF)
255 #define TX_STAT_CTL_INT_AFTER_TX 0x4
257 /* Rx Status/Control. */
258 #define RX_STAT_CTL_OWNER_SHF 30
259 #define RX_STAT_CTL_OWNER_MSK (0x3 << RX_STAT_CTL_OWNER_SHF)
260 #define RX_STAT_CTL_STATUS_SHF 11
261 #define RX_STAT_CTL_STATUS_MSK (0xffff << RX_STAT_CTL_STATUS_SHF)
262 #define RX_STAT_CTL_LENGTH_SHF 0
263 #define RX_STAT_CTL_LENGTH_MSK (0x7ff << RX_STAT_CTL_LENGTH_SHF)
267 /* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
268 #define SAA9730_LAN_REGS_ADDR 0x20400
269 #define SAA9730_LAN_REGS_SIZE 0x00400
271 struct lan_saa9730_regmap {
272 volatile unsigned int TxBuffA; /* 0x20400 */
273 volatile unsigned int TxBuffB; /* 0x20404 */
274 volatile unsigned int RxBuffA; /* 0x20408 */
275 volatile unsigned int RxBuffB; /* 0x2040c */
276 volatile unsigned int PacketCount; /* 0x20410 */
277 volatile unsigned int Ok2Use; /* 0x20414 */
278 volatile unsigned int LanDmaCtl; /* 0x20418 */
279 volatile unsigned int Timeout; /* 0x2041c */
280 volatile unsigned int DmaStatus; /* 0x20420 */
281 volatile unsigned int DmaTest; /* 0x20424 */
282 volatile unsigned char filler20428[0x20430 - 0x20428];
283 volatile unsigned int PauseCount; /* 0x20430 */
284 volatile unsigned int RemotePauseCount; /* 0x20434 */
285 volatile unsigned char filler20438[0x20440 - 0x20438];
286 volatile unsigned int MacCtl; /* 0x20440 */
287 volatile unsigned int CamCtl; /* 0x20444 */
288 volatile unsigned int TxCtl; /* 0x20448 */
289 volatile unsigned int TxStatus; /* 0x2044c */
290 volatile unsigned int RxCtl; /* 0x20450 */
291 volatile unsigned int RxStatus; /* 0x20454 */
292 volatile unsigned int StationMgmtData; /* 0x20458 */
293 volatile unsigned int StationMgmtCtl; /* 0x2045c */
294 volatile unsigned int CamAddress; /* 0x20460 */
295 volatile unsigned int CamData; /* 0x20464 */
296 volatile unsigned int CamEnable; /* 0x20468 */
297 volatile unsigned char filler2046c[0x20500 - 0x2046c];
298 volatile unsigned int DebugPCIMasterAddr; /* 0x20500 */
299 volatile unsigned int DebugLanTxStateMachine; /* 0x20504 */
300 volatile unsigned int DebugLanRxStateMachine; /* 0x20508 */
301 volatile unsigned int DebugLanTxFifoPointers; /* 0x2050c */
302 volatile unsigned int DebugLanRxFifoPointers; /* 0x20510 */
303 volatile unsigned int DebugLanCtlStateMachine; /* 0x20514 */
305 typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap;
308 /* EVM interrupt control registers. */
309 #define EVM_LAN_INT 0x00010000
310 #define EVM_MASTER_EN 0x00000001
312 /* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
313 #define SAA9730_EVM_REGS_ADDR 0x02000
314 #define SAA9730_EVM_REGS_SIZE 0x00400
316 struct evm_saa9730_regmap {
317 volatile unsigned int InterruptStatus1; /* 0x2000 */
318 volatile unsigned int InterruptEnable1; /* 0x2004 */
319 volatile unsigned int InterruptMonitor1; /* 0x2008 */
320 volatile unsigned int Counter; /* 0x200c */
321 volatile unsigned int CounterThreshold; /* 0x2010 */
322 volatile unsigned int CounterControl; /* 0x2014 */
323 volatile unsigned int GpioControl1; /* 0x2018 */
324 volatile unsigned int InterruptStatus2; /* 0x201c */
325 volatile unsigned int InterruptEnable2; /* 0x2020 */
326 volatile unsigned int InterruptMonitor2; /* 0x2024 */
327 volatile unsigned int GpioControl2; /* 0x2028 */
328 volatile unsigned int InterruptBlock1; /* 0x202c */
329 volatile unsigned int InterruptBlock2; /* 0x2030 */
331 typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap;
334 struct lan_saa9730_private {
336 * Rx/Tx packet buffers.
337 * The Rx and Tx packets must be PACKET_SIZE aligned.
340 unsigned int buffer_size;
343 * DMA address of beginning of this object, returned
344 * by pci_alloc_consistent().
348 /* Pointer to the associated pci device structure */
349 struct pci_dev *pci_dev;
351 /* Pointer for the SAA9730 LAN controller register set. */
352 t_lan_saa9730_regmap *lan_saa9730_regs;
354 /* Pointer to the SAA9730 EVM register. */
355 t_evm_saa9730_regmap *evm_saa9730_regs;
357 /* Rcv buffer Index. */
358 unsigned char NextRcvPacketIndex;
359 /* Next buffer index. */
360 unsigned char NextRcvBufferIndex;
362 /* Index of next packet to use in that buffer. */
363 unsigned char NextTxmPacketIndex;
364 /* Next buffer index. */
365 unsigned char NextTxmBufferIndex;
367 /* Index of first pending packet ready to send. */
368 unsigned char PendingTxmPacketIndex;
369 /* Pending buffer index. */
370 unsigned char PendingTxmBufferIndex;
372 unsigned char DmaRcvPackets;
373 unsigned char DmaTxmPackets;
375 void *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
376 void *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
377 unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];
379 unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];
381 struct net_device_stats stats;
385 #endif /* _SAA9730_H */