git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ehci-hub.c

   1 /*
   2  * Copyright (C) 2001-2004 by David Brownell
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 /* this file is part of ehci-hcd.c */
  20
  21 /*-------------------------------------------------------------------------*/
  22
  23 /*
  24  * EHCI Root Hub ... the nonsharable stuff
  25  *
  26  * Registers don't need cpu_to_le32, that happens transparently
  27  */
  28
  29 /*-------------------------------------------------------------------------*/
  30
  31 #ifdef  CONFIG_PM
  32
  33 static int ehci_hub_suspend (struct usb_hcd *hcd)
  34 {
  35         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
  36         int                     port;
  37
  38         if (time_before (jiffies, ehci->next_statechange))
  39                 msleep(5);
  40
  41         port = HCS_N_PORTS (ehci->hcs_params);
  42         spin_lock_irq (&ehci->lock);
  43
  44         /* stop schedules, clean any completed work */
  45         if (HC_IS_RUNNING(hcd->state)) {
  46                 ehci_quiesce (ehci);
  47                 hcd->state = HC_STATE_QUIESCING;
  48         }
  49         ehci->command = readl (&ehci->regs->command);
  50         if (ehci->reclaim)
  51                 ehci->reclaim_ready = 1;
  52         ehci_work(ehci, NULL);
  53
  54         /* suspend any active/unsuspended ports, maybe allow wakeup */
  55         while (port--) {
  56                 u32 __iomem     *reg = &ehci->regs->port_status [port];
  57                 u32             t1 = readl (reg) & ~PORT_RWC_BITS;
  58                 u32             t2 = t1;
  59
  60                 if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
  61                         t2 |= PORT_SUSPEND;
  62                 if (hcd->remote_wakeup)
  63                         t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
  64                 else
  65                         t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
  66
  67                 if (t1 != t2) {
  68                         ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
  69                                 port + 1, t1, t2);
  70                         writel (t2, reg);
  71                 }
  72         }
  73
  74         /* turn off now-idle HC */
  75         del_timer_sync (&ehci->watchdog);
  76         ehci_halt (ehci);
  77         hcd->state = HC_STATE_SUSPENDED;
  78
  79         ehci->next_statechange = jiffies + msecs_to_jiffies(10);
  80         spin_unlock_irq (&ehci->lock);
  81         return 0;
  82 }
  83
  84
  85 /* caller has locked the root hub, and should reset/reinit on error */
  86 static int ehci_hub_resume (struct usb_hcd *hcd)
  87 {
  88         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
  89         u32                     temp;
  90         int                     i;
  91         int                     intr_enable;
  92
  93         if (time_before (jiffies, ehci->next_statechange))
  94                 msleep(5);
  95         spin_lock_irq (&ehci->lock);
  96
  97         /* re-init operational registers in case we lost power */
  98         if (readl (&ehci->regs->intr_enable) == 0) {
  99                 /* at least some APM implementations will try to deliver
 100                  * IRQs right away, so delay them until we're ready.
 101                  */
 102                 intr_enable = 1;
 103                 writel (0, &ehci->regs->segment);
 104                 writel (ehci->periodic_dma, &ehci->regs->frame_list);
 105                 writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
 106         } else
 107                 intr_enable = 0;
 108         ehci_dbg(ehci, "resume root hub%s\n",
 109                         intr_enable ? " after power loss" : "");
 110
 111         /* restore CMD_RUN, framelist size, and irq threshold */
 112         writel (ehci->command, &ehci->regs->command);
 113
 114         /* take ports out of suspend */
 115         i = HCS_N_PORTS (ehci->hcs_params);
 116         while (i--) {
 117                 temp = readl (&ehci->regs->port_status [i]);
 118                 temp &= ~(PORT_RWC_BITS
 119                         | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
 120                 if (temp & PORT_SUSPEND) {
 121                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
 122                         temp |= PORT_RESUME;
 123                 }
 124                 writel (temp, &ehci->regs->port_status [i]);
 125         }
 126         i = HCS_N_PORTS (ehci->hcs_params);
 127         mdelay (20);
 128         while (i--) {
 129                 temp = readl (&ehci->regs->port_status [i]);
 130                 if ((temp & PORT_SUSPEND) == 0)
 131                         continue;
 132                 temp &= ~(PORT_RWC_BITS | PORT_RESUME);
 133                 writel (temp, &ehci->regs->port_status [i]);
 134                 ehci_vdbg (ehci, "resumed port %d\n", i + 1);
 135         }
 136         (void) readl (&ehci->regs->command);
 137
 138         /* maybe re-activate the schedule(s) */
 139         temp = 0;
 140         if (ehci->async->qh_next.qh)
 141                 temp |= CMD_ASE;
 142         if (ehci->periodic_sched)
 143                 temp |= CMD_PSE;
 144         if (temp) {
 145                 ehci->command |= temp;
 146                 writel (ehci->command, &ehci->regs->command);
 147         }
 148
 149         ehci->next_statechange = jiffies + msecs_to_jiffies(5);
 150         hcd->state = HC_STATE_RUNNING;
 151
 152         /* Now we can safely re-enable irqs */
 153         if (intr_enable)
 154                 writel (INTR_MASK, &ehci->regs->intr_enable);
 155
 156         spin_unlock_irq (&ehci->lock);
 157         return 0;
 158 }
 159
 160 #else
 161
 162 #define ehci_hub_suspend        NULL
 163 #define ehci_hub_resume         NULL
 164
 165 #endif  /* CONFIG_PM */
 166
 167 /*-------------------------------------------------------------------------*/
 168
 169 static int check_reset_complete (
 170         struct ehci_hcd *ehci,
 171         int             index,
 172         int             port_status
 173 ) {
 174         if (!(port_status & PORT_CONNECT)) {
 175                 ehci->reset_done [index] = 0;
 176                 return port_status;
 177         }
 178
 179         /* if reset finished and it's still not enabled -- handoff */
 180         if (!(port_status & PORT_PE)) {
 181
 182                 /* with integrated TT, there's nobody to hand it to! */
 183                 if (ehci_is_TDI(ehci)) {
 184                         ehci_dbg (ehci,
 185                                 "Failed to enable port %d on root hub TT\n",
 186                                 index+1);
 187                         return port_status;
 188                 }
 189
 190                 ehci_dbg (ehci, "port %d full speed --> companion\n",
 191                         index + 1);
 192
 193                 // what happens if HCS_N_CC(params) == 0 ?
 194                 port_status |= PORT_OWNER;
 195                 port_status &= ~PORT_RWC_BITS;
 196                 writel (port_status, &ehci->regs->port_status [index]);
 197
 198         } else
 199                 ehci_dbg (ehci, "port %d high speed\n", index + 1);
 200
 201         return port_status;
 202 }
 203
 204 /*-------------------------------------------------------------------------*/
 205
 206
 207 /* build "status change" packet (one or two bytes) from HC registers */
 208
 209 static int
 210 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 211 {
 212         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 213         u32             temp, status = 0;
 214         int             ports, i, retval = 1;
 215         unsigned long   flags;
 216
 217         /* if !USB_SUSPEND, root hub timers won't get shut down ... */
 218         if (!HC_IS_RUNNING(hcd->state))
 219                 return 0;
 220
 221         /* init status to no-changes */
 222         buf [0] = 0;
 223         ports = HCS_N_PORTS (ehci->hcs_params);
 224         if (ports > 7) {
 225                 buf [1] = 0;
 226                 retval++;
 227         }
 228
 229         /* no hub change reports (bit 0) for now (power, ...) */
 230
 231         /* port N changes (bit N)? */
 232         spin_lock_irqsave (&ehci->lock, flags);
 233         for (i = 0; i < ports; i++) {
 234                 temp = readl (&ehci->regs->port_status [i]);
 235                 if (temp & PORT_OWNER) {
 236                         /* don't report this in GetPortStatus */
 237                         if (temp & PORT_CSC) {
 238                                 temp &= ~PORT_RWC_BITS;
 239                                 temp |= PORT_CSC;
 240                                 writel (temp, &ehci->regs->port_status [i]);
 241                         }
 242                         continue;
 243                 }
 244                 if (!(temp & PORT_CONNECT))
 245                         ehci->reset_done [i] = 0;
 246                 if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0
 247                                 // PORT_STAT_C_SUSPEND?
 248                                 || ((temp & PORT_RESUME) != 0
 249                                         && time_after (jiffies,
 250                                                 ehci->reset_done [i]))) {
 251                         if (i < 7)
 252                             buf [0] |= 1 << (i + 1);
 253                         else
 254                             buf [1] |= 1 << (i - 7);
 255                         status = STS_PCD;
 256                 }
 257         }
 258         /* FIXME autosuspend idle root hubs */
 259         spin_unlock_irqrestore (&ehci->lock, flags);
 260         return status ? retval : 0;
 261 }
 262
 263 /*-------------------------------------------------------------------------*/
 264
 265 static void
 266 ehci_hub_descriptor (
 267         struct ehci_hcd                 *ehci,
 268         struct usb_hub_descriptor       *desc
 269 ) {
 270         int             ports = HCS_N_PORTS (ehci->hcs_params);
 271         u16             temp;
 272
 273         desc->bDescriptorType = 0x29;
 274         desc->bPwrOn2PwrGood = 10;      /* ehci 1.0, 2.3.9 says 20ms max */
 275         desc->bHubContrCurrent = 0;
 276
 277         desc->bNbrPorts = ports;
 278         temp = 1 + (ports / 8);
 279         desc->bDescLength = 7 + 2 * temp;
 280
 281         /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 282         memset (&desc->bitmap [0], 0, temp);
 283         memset (&desc->bitmap [temp], 0xff, temp);
 284
 285         temp = 0x0008;                  /* per-port overcurrent reporting */
 286         if (HCS_PPC (ehci->hcs_params))
 287                 temp |= 0x0001;         /* per-port power control */
 288         else
 289                 temp |= 0x0002;         /* no power switching */
 290 #if 0
 291 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
 292         if (HCS_INDICATOR (ehci->hcs_params))
 293                 temp |= 0x0080;         /* per-port indicators (LEDs) */
 294 #endif
 295         desc->wHubCharacteristics = (__force __u16)cpu_to_le16 (temp);
 296 }
 297
 298 /*-------------------------------------------------------------------------*/
 299
 300 #define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 301
 302 static int ehci_hub_control (
 303         struct usb_hcd  *hcd,
 304         u16             typeReq,
 305         u16             wValue,
 306         u16             wIndex,
 307         char            *buf,
 308         u16             wLength
 309 ) {
 310         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 311         int             ports = HCS_N_PORTS (ehci->hcs_params);
 312         u32             temp, status;
 313         unsigned long   flags;
 314         int             retval = 0;
 315
 316         /*
 317          * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
 318          * HCS_INDICATOR may say we can change LEDs to off/amber/green.
 319          * (track current state ourselves) ... blink for diagnostics,
 320          * power, "this is the one", etc.  EHCI spec supports this.
 321          */
 322
 323         spin_lock_irqsave (&ehci->lock, flags);
 324         switch (typeReq) {
 325         case ClearHubFeature:
 326                 switch (wValue) {
 327                 case C_HUB_LOCAL_POWER:
 328                 case C_HUB_OVER_CURRENT:
 329                         /* no hub-wide feature/status flags */
 330                         break;
 331                 default:
 332                         goto error;
 333                 }
 334                 break;
 335         case ClearPortFeature:
 336                 if (!wIndex || wIndex > ports)
 337                         goto error;
 338                 wIndex--;
 339                 temp = readl (&ehci->regs->port_status [wIndex]);
 340                 if (temp & PORT_OWNER)
 341                         break;
 342
 343                 switch (wValue) {
 344                 case USB_PORT_FEAT_ENABLE:
 345                         writel (temp & ~PORT_PE,
 346                                 &ehci->regs->port_status [wIndex]);
 347                         break;
 348                 case USB_PORT_FEAT_C_ENABLE:
 349                         writel((temp & ~PORT_RWC_BITS) | PORT_PEC,
 350                                 &ehci->regs->port_status [wIndex]);
 351                         break;
 352                 case USB_PORT_FEAT_SUSPEND:
 353                         if (temp & PORT_RESET)
 354                                 goto error;
 355                         if (temp & PORT_SUSPEND) {
 356                                 if ((temp & PORT_PE) == 0)
 357                                         goto error;
 358                                 /* resume signaling for 20 msec */
 359                                 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
 360                                 writel (temp | PORT_RESUME,
 361                                         &ehci->regs->port_status [wIndex]);
 362                                 ehci->reset_done [wIndex] = jiffies
 363                                                 + msecs_to_jiffies (20);
 364                         }
 365                         break;
 366                 case USB_PORT_FEAT_C_SUSPEND:
 367                         /* we auto-clear this feature */
 368                         break;
 369                 case USB_PORT_FEAT_POWER:
 370                         if (HCS_PPC (ehci->hcs_params))
 371                                 writel (temp & ~(PORT_RWC_BITS | PORT_POWER),
 372                                         &ehci->regs->port_status [wIndex]);
 373                         break;
 374                 case USB_PORT_FEAT_C_CONNECTION:
 375                         writel((temp & ~PORT_RWC_BITS) | PORT_CSC,
 376                                 &ehci->regs->port_status [wIndex]);
 377                         break;
 378                 case USB_PORT_FEAT_C_OVER_CURRENT:
 379                         writel((temp & ~PORT_RWC_BITS) | PORT_OCC,
 380                                 &ehci->regs->port_status [wIndex]);
 381                         break;
 382                 case USB_PORT_FEAT_C_RESET:
 383                         /* GetPortStatus clears reset */
 384                         break;
 385                 default:
 386                         goto error;
 387                 }
 388                 readl (&ehci->regs->command);   /* unblock posted write */
 389                 break;
 390         case GetHubDescriptor:
 391                 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
 392                         buf);
 393                 break;
 394         case GetHubStatus:
 395                 /* no hub-wide feature/status flags */
 396                 memset (buf, 0, 4);
 397                 //cpu_to_le32s ((u32 *) buf);
 398                 break;
 399         case GetPortStatus:
 400                 if (!wIndex || wIndex > ports)
 401                         goto error;
 402                 wIndex--;
 403                 status = 0;
 404                 temp = readl (&ehci->regs->port_status [wIndex]);
 405
 406                 // wPortChange bits
 407                 if (temp & PORT_CSC)
 408                         status |= 1 << USB_PORT_FEAT_C_CONNECTION;
 409                 if (temp & PORT_PEC)
 410                         status |= 1 << USB_PORT_FEAT_C_ENABLE;
 411                 if (temp & PORT_OCC)
 412                         status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 413
 414                 /* whoever resumes must GetPortStatus to complete it!! */
 415                 if ((temp & PORT_RESUME)
 416                                 && time_after (jiffies,
 417                                         ehci->reset_done [wIndex])) {
 418                         status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 419                         ehci->reset_done [wIndex] = 0;
 420
 421                         /* stop resume signaling */
 422                         temp = readl (&ehci->regs->port_status [wIndex]);
 423                         writel (temp & ~(PORT_RWC_BITS | PORT_RESUME),
 424                                 &ehci->regs->port_status [wIndex]);
 425                         retval = handshake (
 426                                         &ehci->regs->port_status [wIndex],
 427                                         PORT_RESUME, 0, 2000 /* 2msec */);
 428                         if (retval != 0) {
 429                                 ehci_err (ehci, "port %d resume error %d\n",
 430                                         wIndex + 1, retval);
 431                                 goto error;
 432                         }
 433                         temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
 434                 }
 435
 436                 /* whoever resets must GetPortStatus to complete it!! */
 437                 if ((temp & PORT_RESET)
 438                                 && time_after (jiffies,
 439                                         ehci->reset_done [wIndex])) {
 440                         status |= 1 << USB_PORT_FEAT_C_RESET;
 441                         ehci->reset_done [wIndex] = 0;
 442
 443                         /* force reset to complete */
 444                         writel (temp & ~(PORT_RWC_BITS | PORT_RESET),
 445                                         &ehci->regs->port_status [wIndex]);
 446                         /* REVISIT:  some hardware needs 550+ usec to clear
 447                          * this bit; seems too long to spin routinely...
 448                          */
 449                         retval = handshake (
 450                                         &ehci->regs->port_status [wIndex],
 451                                         PORT_RESET, 0, 750);
 452                         if (retval != 0) {
 453                                 ehci_err (ehci, "port %d reset error %d\n",
 454                                         wIndex + 1, retval);
 455                                 goto error;
 456                         }
 457
 458                         /* see what we found out */
 459                         temp = check_reset_complete (ehci, wIndex,
 460                                 readl (&ehci->regs->port_status [wIndex]));
 461                 }
 462
 463                 // don't show wPortStatus if it's owned by a companion hc
 464                 if (!(temp & PORT_OWNER)) {
 465                         if (temp & PORT_CONNECT) {
 466                                 status |= 1 << USB_PORT_FEAT_CONNECTION;
 467                                 // status may be from integrated TT
 468                                 status |= ehci_port_speed(ehci, temp);
 469                         }
 470                         if (temp & PORT_PE)
 471                                 status |= 1 << USB_PORT_FEAT_ENABLE;
 472                         if (temp & (PORT_SUSPEND|PORT_RESUME))
 473                                 status |= 1 << USB_PORT_FEAT_SUSPEND;
 474                         if (temp & PORT_OC)
 475                                 status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
 476                         if (temp & PORT_RESET)
 477                                 status |= 1 << USB_PORT_FEAT_RESET;
 478                         if (temp & PORT_POWER)
 479                                 status |= 1 << USB_PORT_FEAT_POWER;
 480                 }
 481
 482 #ifndef EHCI_VERBOSE_DEBUG
 483         if (status & ~0xffff)   /* only if wPortChange is interesting */
 484 #endif
 485                 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
 486                 // we "know" this alignment is good, caller used kmalloc()...
 487                 *((__le32 *) buf) = cpu_to_le32 (status);
 488                 break;
 489         case SetHubFeature:
 490                 switch (wValue) {
 491                 case C_HUB_LOCAL_POWER:
 492                 case C_HUB_OVER_CURRENT:
 493                         /* no hub-wide feature/status flags */
 494                         break;
 495                 default:
 496                         goto error;
 497                 }
 498                 break;
 499         case SetPortFeature:
 500                 if (!wIndex || wIndex > ports)
 501                         goto error;
 502                 wIndex--;
 503                 temp = readl (&ehci->regs->port_status [wIndex]);
 504                 if (temp & PORT_OWNER)
 505                         break;
 506
 507                 temp &= ~PORT_RWC_BITS;
 508                 switch (wValue) {
 509                 case USB_PORT_FEAT_SUSPEND:
 510                         if ((temp & PORT_PE) == 0
 511                                         || (temp & PORT_RESET) != 0)
 512                                 goto error;
 513                         if (hcd->remote_wakeup)
 514                                 temp |= PORT_WAKE_BITS;
 515                         writel (temp | PORT_SUSPEND,
 516                                 &ehci->regs->port_status [wIndex]);
 517                         break;
 518                 case USB_PORT_FEAT_POWER:
 519                         if (HCS_PPC (ehci->hcs_params))
 520                                 writel (temp | PORT_POWER,
 521                                         &ehci->regs->port_status [wIndex]);
 522                         break;
 523                 case USB_PORT_FEAT_RESET:
 524                         if (temp & PORT_RESUME)
 525                                 goto error;
 526                         /* line status bits may report this as low speed,
 527                          * which can be fine if this root hub has a
 528                          * transaction translator built in.
 529                          */
 530                         if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
 531                                         && !ehci_is_TDI(ehci)
 532                                         && PORT_USB11 (temp)) {
 533                                 ehci_dbg (ehci,
 534                                         "port %d low speed --> companion\n",
 535                                         wIndex + 1);
 536                                 temp |= PORT_OWNER;
 537                         } else {
 538                                 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
 539                                 temp |= PORT_RESET;
 540                                 temp &= ~PORT_PE;
 541
 542                                 /*
 543                                  * caller must wait, then call GetPortStatus
 544                                  * usb 2.0 spec says 50 ms resets on root
 545                                  */
 546                                 ehci->reset_done [wIndex] = jiffies
 547                                                 + msecs_to_jiffies (50);
 548                         }
 549                         writel (temp, &ehci->regs->port_status [wIndex]);
 550                         break;
 551                 default:
 552                         goto error;
 553                 }
 554                 readl (&ehci->regs->command);   /* unblock posted writes */
 555                 break;
 556
 557         default:
 558 error:
 559                 /* "stall" on error */
 560                 retval = -EPIPE;
 561         }
 562         spin_unlock_irqrestore (&ehci->lock, flags);
 563         return retval;
 564 }