git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-s3c2410.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  * (C) Copyright 2002 Hewlett-Packard Company
   7  *
   8  * USB Bus Glue for Samsung S3C2410
   9  *
  10  * Written by Christopher Hoover <ch@hpl.hp.com>
  11  * Based on fragments of previous driver by Rusell King et al.
  12  *
  13  * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
  14  *      by Ben Dooks, <ben@simtec.co.uk>
  15  *      Copyright (C) 2004 Simtec Electronics
  16  *
  17  * Thanks to basprog@mail.ru for updates to newer kernels
  18  *
  19  * This file is licenced under the GPL.
  20 */
  21
  22 #include <asm/hardware.h>
  23 #include <asm/mach-types.h>
  24 #include <asm/hardware/clock.h>
  25 #include <asm/arch/usb-control.h>
  26
  27 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
  28
  29 /* clock device associated with the hcd */
  30
  31 static struct clk *clk;
  32
  33 /* forward definitions */
  34
  35 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
  36
  37 /* conversion functions */
  38
  39 struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
  40 {
  41         return hcd->self.controller->platform_data;
  42 }
  43
  44 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
  45 {
  46         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  47
  48         dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
  49         clk_enable(clk);
  50
  51         if (info != NULL) {
  52                 info->hcd       = hcd;
  53                 info->report_oc = s3c2410_hcd_oc;
  54
  55                 if (info->enable_oc != NULL) {
  56                         (info->enable_oc)(info, 1);
  57                 }
  58         }
  59 }
  60
  61 static void s3c2410_stop_hc(struct platform_device *dev)
  62 {
  63         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  64
  65         dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
  66
  67         if (info != NULL) {
  68                 info->report_oc = NULL;
  69                 info->hcd       = NULL;
  70
  71                 if (info->enable_oc != NULL) {
  72                         (info->enable_oc)(info, 0);
  73                 }
  74         }
  75
  76         clk_disable(clk);
  77 }
  78
  79 /* ohci_s3c2410_hub_status_data
  80  *
  81  * update the status data from the hub with anything that
  82  * has been detected by our system
  83 */
  84
  85 static int
  86 ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
  87 {
  88         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
  89         struct s3c2410_hcd_port *port;
  90         int orig;
  91         int portno;
  92
  93         orig  = ohci_hub_status_data (hcd, buf);
  94
  95         if (info == NULL)
  96                 return orig;
  97
  98         port = &info->port[0];
  99
 100         /* mark any changed port as changed */
 101
 102         for (portno = 0; portno < 2; port++, portno++) {
 103                 if (port->oc_changed == 1 &&
 104                     port->flags & S3C_HCDFLG_USED) {
 105                         dev_dbg(hcd->self.controller,
 106                                 "oc change on port %d\n", portno);
 107
 108                         if (orig < 1)
 109                                 orig = 1;
 110
 111                         buf[0] |= 1<<(portno+1);
 112                 }
 113         }
 114
 115         return orig;
 116 }
 117
 118 /* s3c2410_usb_set_power
 119  *
 120  * configure the power on a port, by calling the platform device
 121  * routine registered with the platform device
 122 */
 123
 124 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
 125                                   int port, int to)
 126 {
 127         if (info == NULL)
 128                 return;
 129
 130         if (info->power_control != NULL) {
 131                 info->port[port-1].power = to;
 132                 (info->power_control)(port-1, to);
 133         }
 134 }
 135
 136 /* ohci_s3c2410_hub_control
 137  *
 138  * look at control requests to the hub, and see if we need
 139  * to take any action or over-ride the results from the
 140  * request.
 141 */
 142
 143 static int ohci_s3c2410_hub_control (
 144         struct usb_hcd  *hcd,
 145         u16             typeReq,
 146         u16             wValue,
 147         u16             wIndex,
 148         char            *buf,
 149         u16             wLength)
 150 {
 151         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
 152         struct usb_hub_descriptor *desc;
 153         int ret = -EINVAL;
 154         u32 *data = (u32 *)buf;
 155
 156         dev_dbg(hcd->self.controller,
 157                 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
 158                 hcd, typeReq, wValue, wIndex, buf, wLength);
 159
 160         /* if we are only an humble host without any special capabilites
 161          * process the request straight away and exit */
 162
 163         if (info == NULL) {
 164                 ret = ohci_hub_control(hcd, typeReq, wValue,
 165                                        wIndex, buf, wLength);
 166                 goto out;
 167         }
 168
 169         /* check the request to see if it needs handling */
 170
 171         switch (typeReq) {
 172         case SetPortFeature:
 173                 if (wValue == USB_PORT_FEAT_POWER) {
 174                         dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
 175                         s3c2410_usb_set_power(info, wIndex, 1);
 176                         goto out;
 177                 }
 178                 break;
 179
 180         case ClearPortFeature:
 181                 switch (wValue) {
 182                 case USB_PORT_FEAT_C_OVER_CURRENT:
 183                         dev_dbg(hcd->self.controller,
 184                                 "ClearPortFeature: C_OVER_CURRENT\n");
 185
 186                         if (valid_port(wIndex)) {
 187                                 info->port[wIndex-1].oc_changed = 0;
 188                                 info->port[wIndex-1].oc_status = 0;
 189                         }
 190
 191                         goto out;
 192
 193                 case USB_PORT_FEAT_OVER_CURRENT:
 194                         dev_dbg(hcd->self.controller,
 195                                 "ClearPortFeature: OVER_CURRENT\n");
 196
 197                         if (valid_port(wIndex)) {
 198                                 info->port[wIndex-1].oc_status = 0;
 199                         }
 200
 201                         goto out;
 202
 203                 case USB_PORT_FEAT_POWER:
 204                         dev_dbg(hcd->self.controller,
 205                                 "ClearPortFeature: POWER\n");
 206
 207                         if (valid_port(wIndex)) {
 208                                 s3c2410_usb_set_power(info, wIndex, 0);
 209                                 return 0;
 210                         }
 211                 }
 212                 break;
 213         }
 214
 215         ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
 216         if (ret)
 217                 goto out;
 218
 219         switch (typeReq) {
 220         case GetHubDescriptor:
 221
 222                 /* update the hub's descriptor */
 223
 224                 desc = (struct usb_hub_descriptor *)buf;
 225
 226                 if (info->power_control == NULL)
 227                         return ret;
 228
 229                 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
 230                         desc->wHubCharacteristics);
 231
 232                 /* remove the old configurations for power-switching, and
 233                  * over-current protection, and insert our new configuration
 234                  */
 235
 236                 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
 237                 desc->wHubCharacteristics |= cpu_to_le16(0x0001);
 238
 239                 if (info->enable_oc) {
 240                         desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
 241                         desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
 242                 }
 243
 244                 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
 245                         desc->wHubCharacteristics);
 246
 247                 return ret;
 248
 249         case GetPortStatus:
 250                 /* check port status */
 251
 252                 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
 253
 254                 if (valid_port(wIndex)) {
 255                         if (info->port[wIndex-1].oc_changed) {
 256                                 *data |= cpu_to_le32(RH_PS_OCIC);
 257                         }
 258
 259                         if (info->port[wIndex-1].oc_status) {
 260                                 *data |= cpu_to_le32(RH_PS_POCI);
 261                         }
 262                 }
 263         }
 264
 265  out:
 266         return ret;
 267 }
 268
 269 /* s3c2410_hcd_oc
 270  *
 271  * handle an over-current report
 272 */
 273
 274 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
 275 {
 276         struct s3c2410_hcd_port *port;
 277         struct usb_hcd *hcd;
 278         unsigned long flags;
 279         int portno;
 280
 281         if (info == NULL)
 282                 return;
 283
 284         port = &info->port[0];
 285         hcd = info->hcd;
 286
 287         local_irq_save(flags);
 288
 289         for (portno = 0; portno < 2; port++, portno++) {
 290                 if (port_oc & (1<<portno) &&
 291                     port->flags & S3C_HCDFLG_USED) {
 292                         port->oc_status = 1;
 293                         port->oc_changed = 1;
 294
 295                         /* ok, once over-current is detected,
 296                            the port needs to be powered down */
 297                         s3c2410_usb_set_power(info, portno+1, 0);
 298                 }
 299         }
 300
 301         local_irq_restore(flags);
 302 }
 303
 304 /* may be called without controller electrically present */
 305 /* may be called with controller, bus, and devices active */
 306
 307 /*
 308  * usb_hcd_s3c2410_remove - shutdown processing for HCD
 309  * @dev: USB Host Controller being removed
 310  * Context: !in_interrupt()
 311  *
 312  * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
 313  * the HCD's stop() method.  It is always called from a thread
 314  * context, normally "rmmod", "apmd", or something similar.
 315  *
 316 */
 317
 318 void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
 319 {
 320         usb_remove_hcd(hcd);
 321         s3c2410_stop_hc(dev);
 322         iounmap(hcd->regs);
 323         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 324         usb_put_hcd(hcd);
 325 }
 326
 327 /**
 328  * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
 329  * Context: !in_interrupt()
 330  *
 331  * Allocates basic resources for this USB host controller, and
 332  * then invokes the start() method for the HCD associated with it
 333  * through the hotplug entry's driver_data.
 334  *
 335  */
 336 int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 337                            struct platform_device *dev)
 338 {
 339         struct usb_hcd *hcd = NULL;
 340         int retval;
 341
 342         s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
 343         s3c2410_usb_set_power(dev->dev.platform_data, 2, 1);
 344
 345         hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
 346         if (hcd == NULL)
 347                 return -ENOMEM;
 348
 349         hcd->rsrc_start = dev->resource[0].start;
 350         hcd->rsrc_len   = dev->resource[0].end - dev->resource[0].start + 1;
 351
 352         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 353                 dev_err(&dev->dev, "request_mem_region failed");
 354                 retval = -EBUSY;
 355                 goto err0;
 356         }
 357
 358         clk = clk_get(NULL, "usb-host");
 359         if (IS_ERR(clk)) {
 360                 dev_err(&dev->dev, "cannot get usb-host clock\n");
 361                 retval = -ENOENT;
 362                 goto err1;
 363         }
 364
 365         clk_use(clk);
 366         s3c2410_start_hc(dev, hcd);
 367
 368         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 369         if (!hcd->regs) {
 370                 dev_err(&dev->dev, "ioremap failed\n");
 371                 retval = -ENOMEM;
 372                 goto err2;
 373         }
 374
 375         ohci_hcd_init(hcd_to_ohci(hcd));
 376
 377         retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
 378         if (retval != 0)
 379                 goto err2;
 380
 381         return 0;
 382
 383  err2:
 384         s3c2410_stop_hc(dev);
 385         iounmap(hcd->regs);
 386         clk_unuse(clk);
 387         clk_put(clk);
 388
 389  err1:
 390         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 391
 392  err0:
 393         usb_put_hcd(hcd);
 394         return retval;
 395 }
 396
 397 /*-------------------------------------------------------------------------*/
 398
 399 static int
 400 ohci_s3c2410_start (struct usb_hcd *hcd)
 401 {
 402         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 403         int ret;
 404
 405         if ((ret = ohci_init(ohci)) < 0)
 406                 return ret;
 407
 408         if ((ret = ohci_run (ohci)) < 0) {
 409                 err ("can't start %s", hcd->self.bus_name);
 410                 ohci_stop (hcd);
 411                 return ret;
 412         }
 413
 414         return 0;
 415 }
 416
 417
 418 static const struct hc_driver ohci_s3c2410_hc_driver = {
 419         .description =          hcd_name,
 420         .product_desc =         "S3C24XX OHCI",
 421         .hcd_priv_size =        sizeof(struct ohci_hcd),
 422
 423         /*
 424          * generic hardware linkage
 425          */
 426         .irq =                  ohci_irq,
 427         .flags =                HCD_USB11 | HCD_MEMORY,
 428
 429         /*
 430          * basic lifecycle operations
 431          */
 432         .start =                ohci_s3c2410_start,
 433         .stop =                 ohci_stop,
 434
 435         /*
 436          * managing i/o requests and associated device resources
 437          */
 438         .urb_enqueue =          ohci_urb_enqueue,
 439         .urb_dequeue =          ohci_urb_dequeue,
 440         .endpoint_disable =     ohci_endpoint_disable,
 441
 442         /*
 443          * scheduling support
 444          */
 445         .get_frame_number =     ohci_get_frame,
 446
 447         /*
 448          * root hub support
 449          */
 450         .hub_status_data =      ohci_s3c2410_hub_status_data,
 451         .hub_control =          ohci_s3c2410_hub_control,
 452
 453 #if defined(CONFIG_USB_SUSPEND) && 0
 454         .hub_suspend =          ohci_hub_suspend,
 455         .hub_resume =           ohci_hub_resume,
 456 #endif
 457 };
 458
 459 /* device driver */
 460
 461 static int ohci_hcd_s3c2410_drv_probe(struct device *dev)
 462 {
 463         struct platform_device *pdev = to_platform_device(dev);
 464         return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
 465 }
 466
 467 static int ohci_hcd_s3c2410_drv_remove(struct device *dev)
 468 {
 469         struct platform_device *pdev = to_platform_device(dev);
 470         struct usb_hcd *hcd = dev_get_drvdata(dev);
 471
 472         usb_hcd_s3c2410_remove(hcd, pdev);
 473         return 0;
 474 }
 475
 476 static struct device_driver ohci_hcd_s3c2410_driver = {
 477         .name           = "s3c2410-ohci",
 478         .bus            = &platform_bus_type,
 479         .probe          = ohci_hcd_s3c2410_drv_probe,
 480         .remove         = ohci_hcd_s3c2410_drv_remove,
 481         /*.suspend      = ohci_hcd_s3c2410_drv_suspend, */
 482         /*.resume       = ohci_hcd_s3c2410_drv_resume, */
 483 };
 484
 485 static int __init ohci_hcd_s3c2410_init (void)
 486 {
 487         return driver_register(&ohci_hcd_s3c2410_driver);
 488 }
 489
 490 static void __exit ohci_hcd_s3c2410_cleanup (void)
 491 {
 492         driver_unregister(&ohci_hcd_s3c2410_driver);
 493 }
 494
 495 module_init (ohci_hcd_s3c2410_init);
 496 module_exit (ohci_hcd_s3c2410_cleanup);