drm/i915: add GEM GTT mapping support
[linux-2.6] / drivers / gpu / drm / i915 / i915_gem_tiling.c
1 /*
2  * Copyright © 2008 Intel Corporation
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice (including the next
12  * paragraph) shall be included in all copies or substantial portions of the
13  * Software.
14  *
15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
21  * IN THE SOFTWARE.
22  *
23  * Authors:
24  *    Eric Anholt <eric@anholt.net>
25  *
26  */
27
28 #include "drmP.h"
29 #include "drm.h"
30 #include "i915_drm.h"
31 #include "i915_drv.h"
32
33 /** @file i915_gem_tiling.c
34  *
35  * Support for managing tiling state of buffer objects.
36  *
37  * The idea behind tiling is to increase cache hit rates by rearranging
38  * pixel data so that a group of pixel accesses are in the same cacheline.
39  * Performance improvement from doing this on the back/depth buffer are on
40  * the order of 30%.
41  *
42  * Intel architectures make this somewhat more complicated, though, by
43  * adjustments made to addressing of data when the memory is in interleaved
44  * mode (matched pairs of DIMMS) to improve memory bandwidth.
45  * For interleaved memory, the CPU sends every sequential 64 bytes
46  * to an alternate memory channel so it can get the bandwidth from both.
47  *
48  * The GPU also rearranges its accesses for increased bandwidth to interleaved
49  * memory, and it matches what the CPU does for non-tiled.  However, when tiled
50  * it does it a little differently, since one walks addresses not just in the
51  * X direction but also Y.  So, along with alternating channels when bit
52  * 6 of the address flips, it also alternates when other bits flip --  Bits 9
53  * (every 512 bytes, an X tile scanline) and 10 (every two X tile scanlines)
54  * are common to both the 915 and 965-class hardware.
55  *
56  * The CPU also sometimes XORs in higher bits as well, to improve
57  * bandwidth doing strided access like we do so frequently in graphics.  This
58  * is called "Channel XOR Randomization" in the MCH documentation.  The result
59  * is that the CPU is XORing in either bit 11 or bit 17 to bit 6 of its address
60  * decode.
61  *
62  * All of this bit 6 XORing has an effect on our memory management,
63  * as we need to make sure that the 3d driver can correctly address object
64  * contents.
65  *
66  * If we don't have interleaved memory, all tiling is safe and no swizzling is
67  * required.
68  *
69  * When bit 17 is XORed in, we simply refuse to tile at all.  Bit
70  * 17 is not just a page offset, so as we page an objet out and back in,
71  * individual pages in it will have different bit 17 addresses, resulting in
72  * each 64 bytes being swapped with its neighbor!
73  *
74  * Otherwise, if interleaved, we have to tell the 3d driver what the address
75  * swizzling it needs to do is, since it's writing with the CPU to the pages
76  * (bit 6 and potentially bit 11 XORed in), and the GPU is reading from the
77  * pages (bit 6, 9, and 10 XORed in), resulting in a cumulative bit swizzling
78  * required by the CPU of XORing in bit 6, 9, 10, and potentially 11, in order
79  * to match what the GPU expects.
80  */
81
82 /**
83  * Detects bit 6 swizzling of address lookup between IGD access and CPU
84  * access through main memory.
85  */
86 void
87 i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
88 {
89         drm_i915_private_t *dev_priv = dev->dev_private;
90         uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
91         uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
92
93         if (!IS_I9XX(dev)) {
94                 /* As far as we know, the 865 doesn't have these bit 6
95                  * swizzling issues.
96                  */
97                 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
98                 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
99         } else if ((!IS_I965G(dev) && !IS_G33(dev)) || IS_I965GM(dev) ||
100                    IS_GM45(dev)) {
101                 uint32_t dcc;
102
103                 /* On 915-945 and GM965, channel interleave by the CPU is
104                  * determined by DCC.  The CPU will alternate based on bit 6
105                  * in interleaved mode, and the GPU will then also alternate
106                  * on bit 6, 9, and 10 for X, but the CPU may also optionally
107                  * alternate based on bit 17 (XOR not disabled and XOR
108                  * bit == 17).
109                  */
110                 dcc = I915_READ(DCC);
111                 switch (dcc & DCC_ADDRESSING_MODE_MASK) {
112                 case DCC_ADDRESSING_MODE_SINGLE_CHANNEL:
113                 case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC:
114                         swizzle_x = I915_BIT_6_SWIZZLE_NONE;
115                         swizzle_y = I915_BIT_6_SWIZZLE_NONE;
116                         break;
117                 case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED:
118                         if (IS_I915G(dev) || IS_I915GM(dev) ||
119                             dcc & DCC_CHANNEL_XOR_DISABLE) {
120                                 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
121                                 swizzle_y = I915_BIT_6_SWIZZLE_9;
122                         } else if ((IS_I965GM(dev) || IS_GM45(dev)) &&
123                                    (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
124                                 /* GM965/GM45 does either bit 11 or bit 17
125                                  * swizzling.
126                                  */
127                                 swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
128                                 swizzle_y = I915_BIT_6_SWIZZLE_9_11;
129                         } else {
130                                 /* Bit 17 or perhaps other swizzling */
131                                 swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
132                                 swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
133                         }
134                         break;
135                 }
136                 if (dcc == 0xffffffff) {
137                         DRM_ERROR("Couldn't read from MCHBAR.  "
138                                   "Disabling tiling.\n");
139                         swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
140                         swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
141                 }
142         } else {
143                 /* The 965, G33, and newer, have a very flexible memory
144                  * configuration.  It will enable dual-channel mode
145                  * (interleaving) on as much memory as it can, and the GPU
146                  * will additionally sometimes enable different bit 6
147                  * swizzling for tiled objects from the CPU.
148                  *
149                  * Here's what I found on the G965:
150                  *    slot fill         memory size  swizzling
151                  * 0A   0B   1A   1B    1-ch   2-ch
152                  * 512  0    0    0     512    0     O
153                  * 512  0    512  0     16     1008  X
154                  * 512  0    0    512   16     1008  X
155                  * 0    512  0    512   16     1008  X
156                  * 1024 1024 1024 0     2048   1024  O
157                  *
158                  * We could probably detect this based on either the DRB
159                  * matching, which was the case for the swizzling required in
160                  * the table above, or from the 1-ch value being less than
161                  * the minimum size of a rank.
162                  */
163                 if (I915_READ16(C0DRB3) != I915_READ16(C1DRB3)) {
164                         swizzle_x = I915_BIT_6_SWIZZLE_NONE;
165                         swizzle_y = I915_BIT_6_SWIZZLE_NONE;
166                 } else {
167                         swizzle_x = I915_BIT_6_SWIZZLE_9_10;
168                         swizzle_y = I915_BIT_6_SWIZZLE_9;
169                 }
170         }
171
172         dev_priv->mm.bit_6_swizzle_x = swizzle_x;
173         dev_priv->mm.bit_6_swizzle_y = swizzle_y;
174 }
175
176 /**
177  * Sets the tiling mode of an object, returning the required swizzling of
178  * bit 6 of addresses in the object.
179  */
180 int
181 i915_gem_set_tiling(struct drm_device *dev, void *data,
182                    struct drm_file *file_priv)
183 {
184         struct drm_i915_gem_set_tiling *args = data;
185         drm_i915_private_t *dev_priv = dev->dev_private;
186         struct drm_gem_object *obj;
187         struct drm_i915_gem_object *obj_priv;
188
189         obj = drm_gem_object_lookup(dev, file_priv, args->handle);
190         if (obj == NULL)
191                 return -EINVAL;
192         obj_priv = obj->driver_private;
193
194         mutex_lock(&dev->struct_mutex);
195
196         if (args->tiling_mode == I915_TILING_NONE) {
197                 obj_priv->tiling_mode = I915_TILING_NONE;
198                 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
199         } else {
200                 if (args->tiling_mode == I915_TILING_X)
201                         args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
202                 else
203                         args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
204                 /* If we can't handle the swizzling, make it untiled. */
205                 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
206                         args->tiling_mode = I915_TILING_NONE;
207                         args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
208                 }
209         }
210         obj_priv->tiling_mode = args->tiling_mode;
211         obj_priv->stride = args->stride;
212
213         mutex_unlock(&dev->struct_mutex);
214
215         drm_gem_object_unreference(obj);
216
217         return 0;
218 }
219
220 /**
221  * Returns the current tiling mode and required bit 6 swizzling for the object.
222  */
223 int
224 i915_gem_get_tiling(struct drm_device *dev, void *data,
225                    struct drm_file *file_priv)
226 {
227         struct drm_i915_gem_get_tiling *args = data;
228         drm_i915_private_t *dev_priv = dev->dev_private;
229         struct drm_gem_object *obj;
230         struct drm_i915_gem_object *obj_priv;
231
232         obj = drm_gem_object_lookup(dev, file_priv, args->handle);
233         if (obj == NULL)
234                 return -EINVAL;
235         obj_priv = obj->driver_private;
236
237         mutex_lock(&dev->struct_mutex);
238
239         args->tiling_mode = obj_priv->tiling_mode;
240         switch (obj_priv->tiling_mode) {
241         case I915_TILING_X:
242                 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
243                 break;
244         case I915_TILING_Y:
245                 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
246                 break;
247         case I915_TILING_NONE:
248                 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
249                 break;
250         default:
251                 DRM_ERROR("unknown tiling mode\n");
252         }
253
254         mutex_unlock(&dev->struct_mutex);
255
256         drm_gem_object_unreference(obj);
257
258         return 0;
259 }