2 * linux/arch/arm/mm/init.c
4 * Copyright (C) 1995-2005 Russell King
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 #include <linux/config.h>
11 #include <linux/kernel.h>
12 #include <linux/errno.h>
13 #include <linux/ptrace.h>
14 #include <linux/swap.h>
15 #include <linux/init.h>
16 #include <linux/bootmem.h>
17 #include <linux/mman.h>
18 #include <linux/nodemask.h>
19 #include <linux/initrd.h>
21 #include <asm/mach-types.h>
22 #include <asm/hardware.h>
23 #include <asm/setup.h>
26 #include <asm/mach/arch.h>
27 #include <asm/mach/map.h>
29 #define TABLE_SIZE (2 * PTRS_PER_PTE * sizeof(pte_t))
31 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
33 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
34 extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end;
35 extern unsigned long phys_initrd_start;
36 extern unsigned long phys_initrd_size;
39 * The sole use of this is to pass memory configuration
40 * data from paging_init to mem_init.
42 static struct meminfo meminfo __initdata = { 0, };
45 * empty_zero_page is a special page that is used for
46 * zero-initialized data and COW.
48 struct page *empty_zero_page;
52 int free = 0, total = 0, reserved = 0;
53 int shared = 0, cached = 0, slab = 0, node;
55 printk("Mem-info:\n");
57 printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
59 for_each_online_node(node) {
60 struct page *page, *end;
62 page = NODE_MEM_MAP(node);
63 end = page + NODE_DATA(node)->node_spanned_pages;
67 if (PageReserved(page))
69 else if (PageSwapCache(page))
71 else if (PageSlab(page))
73 else if (!page_count(page))
76 shared += page_count(page) - 1;
81 printk("%d pages of RAM\n", total);
82 printk("%d free pages\n", free);
83 printk("%d reserved pages\n", reserved);
84 printk("%d slab pages\n", slab);
85 printk("%d pages shared\n", shared);
86 printk("%d pages swap cached\n", cached);
89 static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
91 return pmd_offset(pgd, virt);
94 static inline pmd_t *pmd_off_k(unsigned long virt)
96 return pmd_off(pgd_offset_k(virt), virt);
99 #define for_each_nodebank(iter,mi,no) \
100 for (iter = 0; iter < mi->nr_banks; iter++) \
101 if (mi->bank[iter].node == no)
104 * FIXME: We really want to avoid allocating the bootmap bitmap
105 * over the top of the initrd. Hopefully, this is located towards
106 * the start of a bank, so if we allocate the bootmap bitmap at
107 * the end, we won't clash.
109 static unsigned int __init
110 find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
112 unsigned int start_pfn, bank, bootmap_pfn;
114 start_pfn = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
117 for_each_nodebank(bank, mi, node) {
118 unsigned int start, end;
120 start = mi->bank[bank].start >> PAGE_SHIFT;
121 end = (mi->bank[bank].size +
122 mi->bank[bank].start) >> PAGE_SHIFT;
127 if (start < start_pfn)
133 if (end - start >= bootmap_pages) {
139 if (bootmap_pfn == 0)
145 static int __init check_initrd(struct meminfo *mi)
147 int initrd_node = -2;
148 #ifdef CONFIG_BLK_DEV_INITRD
149 unsigned long end = phys_initrd_start + phys_initrd_size;
152 * Make sure that the initrd is within a valid area of
155 if (phys_initrd_size) {
160 for (i = 0; i < mi->nr_banks; i++) {
161 unsigned long bank_end;
163 bank_end = mi->bank[i].start + mi->bank[i].size;
165 if (mi->bank[i].start <= phys_initrd_start &&
167 initrd_node = mi->bank[i].node;
171 if (initrd_node == -1) {
172 printk(KERN_ERR "initrd (0x%08lx - 0x%08lx) extends beyond "
173 "physical memory - disabling initrd\n",
174 phys_initrd_start, end);
175 phys_initrd_start = phys_initrd_size = 0;
183 * Reserve the various regions of node 0
185 static __init void reserve_node_zero(pg_data_t *pgdat)
187 unsigned long res_size = 0;
190 * Register the kernel text and data with bootmem.
191 * Note that this can only be in node 0.
193 #ifdef CONFIG_XIP_KERNEL
194 reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
196 reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
200 * Reserve the page tables. These are already in use,
201 * and can only be in node 0.
203 reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
204 PTRS_PER_PGD * sizeof(pgd_t));
207 * Hmm... This should go elsewhere, but we really really need to
208 * stop things allocating the low memory; ideally we need a better
209 * implementation of GFP_DMA which does not assume that DMA-able
210 * memory starts at zero.
212 if (machine_is_integrator() || machine_is_cintegrator())
213 res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
216 * These should likewise go elsewhere. They pre-reserve the
217 * screen memory region at the start of main system memory.
219 if (machine_is_edb7211())
220 res_size = 0x00020000;
221 if (machine_is_p720t())
222 res_size = 0x00014000;
226 * Because of the SA1111 DMA bug, we want to preserve our
227 * precious DMA-able memory...
229 res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
232 reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
235 void __init build_mem_type_table(void);
236 void __init create_mapping(struct map_desc *md);
238 static unsigned long __init
239 bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
241 unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
242 unsigned long start_pfn, end_pfn, boot_pfn;
243 unsigned int boot_pages;
251 * Calculate the pfn range, and map the memory banks for this node.
253 for_each_nodebank(i, mi, node) {
254 unsigned long start, end;
257 start = mi->bank[i].start >> PAGE_SHIFT;
258 end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
260 if (start_pfn > start)
265 map.pfn = __phys_to_pfn(mi->bank[i].start);
266 map.virtual = __phys_to_virt(mi->bank[i].start);
267 map.length = mi->bank[i].size;
268 map.type = MT_MEMORY;
270 create_mapping(&map);
274 * If there is no memory in this node, ignore it.
280 * Allocate the bootmem bitmap page.
282 boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
283 boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
286 * Initialise the bootmem allocator for this node, handing the
287 * memory banks over to bootmem.
289 node_set_online(node);
290 pgdat = NODE_DATA(node);
291 init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
293 for_each_nodebank(i, mi, node)
294 free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size);
297 * Reserve the bootmem bitmap for this node.
299 reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
300 boot_pages << PAGE_SHIFT);
302 #ifdef CONFIG_BLK_DEV_INITRD
304 * If the initrd is in this node, reserve its memory.
306 if (node == initrd_node) {
307 reserve_bootmem_node(pgdat, phys_initrd_start,
309 initrd_start = __phys_to_virt(phys_initrd_start);
310 initrd_end = initrd_start + phys_initrd_size;
315 * Finally, reserve any node zero regions.
318 reserve_node_zero(pgdat);
321 * initialise the zones within this node.
323 memset(zone_size, 0, sizeof(zone_size));
324 memset(zhole_size, 0, sizeof(zhole_size));
327 * The size of this node has already been determined. If we need
328 * to do anything fancy with the allocation of this memory to the
329 * zones, now is the time to do it.
331 zone_size[0] = end_pfn - start_pfn;
334 * For each bank in this node, calculate the size of the holes.
335 * holes = node_size - sum(bank_sizes_in_node)
337 zhole_size[0] = zone_size[0];
338 for_each_nodebank(i, mi, node)
339 zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
342 * Adjust the sizes according to any special requirements for
345 arch_adjust_zones(node, zone_size, zhole_size);
347 free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
352 static void __init bootmem_init(struct meminfo *mi)
354 unsigned long addr, memend_pfn = 0;
355 int node, initrd_node, i;
358 * Invalidate the node number for empty or invalid memory banks
360 for (i = 0; i < mi->nr_banks; i++)
361 if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES)
362 mi->bank[i].node = -1;
364 memcpy(&meminfo, mi, sizeof(meminfo));
366 #ifdef CONFIG_XIP_KERNEL
368 p->pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PMD_MASK);
369 p->virtual = (unsigned long)&_stext & PMD_MASK;
370 p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
376 * Clear out all the mappings below the kernel image.
377 * FIXME: what about XIP?
379 for (addr = 0; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
380 pmd_clear(pmd_off_k(addr));
383 * Clear out all the kernel space mappings, except for the first
384 * memory bank, up to the end of the vmalloc region.
386 for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
387 addr < VMALLOC_END; addr += PGDIR_SIZE)
388 pmd_clear(pmd_off_k(addr));
391 * Locate which node contains the ramdisk image, if any.
393 initrd_node = check_initrd(mi);
396 * Run through each node initialising the bootmem allocator.
398 for_each_node(node) {
399 unsigned long end_pfn;
401 end_pfn = bootmem_init_node(node, initrd_node, mi);
404 * Remember the highest memory PFN.
406 if (end_pfn > memend_pfn)
407 memend_pfn = end_pfn;
410 high_memory = __va(memend_pfn << PAGE_SHIFT);
413 * This doesn't seem to be used by the Linux memory manager any
414 * more, but is used by ll_rw_block. If we can get rid of it, we
415 * also get rid of some of the stuff above as well.
417 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
418 * the system, not the maximum PFN.
420 max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
424 * Set up device the mappings. Since we clear out the page tables for all
425 * mappings above VMALLOC_END, we will remove any debug device mappings.
426 * This means you have to be careful how you debug this function, or any
427 * called function. (Do it by code inspection!)
429 static void __init devicemaps_init(struct machine_desc *mdesc)
435 for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
436 pmd_clear(pmd_off_k(addr));
439 * Map the cache flushing regions.
442 map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
443 map.virtual = FLUSH_BASE;
444 map.length = PGDIR_SIZE;
445 map.type = MT_CACHECLEAN;
446 create_mapping(&map);
448 #ifdef FLUSH_BASE_MINICACHE
449 map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + PGDIR_SIZE);
450 map.virtual = FLUSH_BASE_MINICACHE;
451 map.length = PGDIR_SIZE;
452 map.type = MT_MINICLEAN;
453 create_mapping(&map);
457 local_flush_tlb_all();
459 vectors = alloc_bootmem_low_pages(PAGE_SIZE);
463 * Create a mapping for the machine vectors at the high-vectors
464 * location (0xffff0000). If we aren't using high-vectors, also
465 * create a mapping at the low-vectors virtual address.
467 map.pfn = __phys_to_pfn(virt_to_phys(vectors));
468 map.virtual = 0xffff0000;
469 map.length = PAGE_SIZE;
470 map.type = MT_HIGH_VECTORS;
471 create_mapping(&map);
473 if (!vectors_high()) {
475 map.type = MT_LOW_VECTORS;
476 create_mapping(&map);
480 * Ask the machine support to map in the statically mapped devices.
481 * After this point, we can start to touch devices again.
488 * paging_init() sets up the page tables, initialises the zone memory
489 * maps, and sets up the zero page, bad page and bad page tables.
491 void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
495 build_mem_type_table();
497 devicemaps_init(mdesc);
499 top_pmd = pmd_off_k(0xffff0000);
502 * allocate the zero page. Note that we count on this going ok.
504 zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
505 memzero(zero_page, PAGE_SIZE);
506 empty_zero_page = virt_to_page(zero_page);
507 flush_dcache_page(empty_zero_page);
510 static inline void free_area(unsigned long addr, unsigned long end, char *s)
512 unsigned int size = (end - addr) >> 10;
514 for (; addr < end; addr += PAGE_SIZE) {
515 struct page *page = virt_to_page(addr);
516 ClearPageReserved(page);
517 set_page_count(page, 1);
523 printk(KERN_INFO "Freeing %s memory: %dK\n", s, size);
527 free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
529 struct page *start_pg, *end_pg;
530 unsigned long pg, pgend;
533 * Convert start_pfn/end_pfn to a struct page pointer.
535 start_pg = pfn_to_page(start_pfn);
536 end_pg = pfn_to_page(end_pfn);
539 * Convert to physical addresses, and
540 * round start upwards and end downwards.
542 pg = PAGE_ALIGN(__pa(start_pg));
543 pgend = __pa(end_pg) & PAGE_MASK;
546 * If there are free pages between these,
547 * free the section of the memmap array.
550 free_bootmem_node(NODE_DATA(node), pg, pgend - pg);
554 * The mem_map array can get very big. Free the unused area of the memory map.
556 static void __init free_unused_memmap_node(int node, struct meminfo *mi)
558 unsigned long bank_start, prev_bank_end = 0;
562 * [FIXME] This relies on each bank being in address order. This
563 * may not be the case, especially if the user has provided the
564 * information on the command line.
566 for_each_nodebank(i, mi, node) {
567 bank_start = mi->bank[i].start >> PAGE_SHIFT;
568 if (bank_start < prev_bank_end) {
569 printk(KERN_ERR "MEM: unordered memory banks. "
570 "Not freeing memmap.\n");
575 * If we had a previous bank, and there is a space
576 * between the current bank and the previous, free it.
578 if (prev_bank_end && prev_bank_end != bank_start)
579 free_memmap(node, prev_bank_end, bank_start);
581 prev_bank_end = (mi->bank[i].start +
582 mi->bank[i].size) >> PAGE_SHIFT;
587 * mem_init() marks the free areas in the mem_map and tells us how much
588 * memory is free. This is done after various parts of the system have
589 * claimed their memory after the kernel image.
591 void __init mem_init(void)
593 unsigned int codepages, datapages, initpages;
596 codepages = &_etext - &_text;
597 datapages = &_end - &__data_start;
598 initpages = &__init_end - &__init_begin;
600 #ifndef CONFIG_DISCONTIGMEM
601 max_mapnr = virt_to_page(high_memory) - mem_map;
604 /* this will put all unused low memory onto the freelists */
605 for_each_online_node(node) {
606 pg_data_t *pgdat = NODE_DATA(node);
608 free_unused_memmap_node(node, &meminfo);
610 if (pgdat->node_spanned_pages != 0)
611 totalram_pages += free_all_bootmem_node(pgdat);
615 /* now that our DMA memory is actually so designated, we can free it */
616 free_area(PAGE_OFFSET, (unsigned long)swapper_pg_dir, NULL);
620 * Since our memory may not be contiguous, calculate the
621 * real number of pages we have in this system
623 printk(KERN_INFO "Memory:");
626 for (i = 0; i < meminfo.nr_banks; i++) {
627 num_physpages += meminfo.bank[i].size >> PAGE_SHIFT;
628 printk(" %ldMB", meminfo.bank[i].size >> 20);
631 printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
632 printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
633 "%dK data, %dK init)\n",
634 (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
635 codepages >> 10, datapages >> 10, initpages >> 10);
637 if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
638 extern int sysctl_overcommit_memory;
640 * On a machine this small we won't get
641 * anywhere without overcommit, so turn
644 sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
648 void free_initmem(void)
650 if (!machine_is_integrator() && !machine_is_cintegrator()) {
651 free_area((unsigned long)(&__init_begin),
652 (unsigned long)(&__init_end),
657 #ifdef CONFIG_BLK_DEV_INITRD
659 static int keep_initrd;
661 void free_initrd_mem(unsigned long start, unsigned long end)
664 free_area(start, end, "initrd");
667 static int __init keepinitrd_setup(char *__unused)
673 __setup("keepinitrd", keepinitrd_setup);