Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
[linux-2.6] / drivers / usb / serial / cypress_m8.c
1 /*
2  * USB Cypress M8 driver
3  *
4  *      Copyright (C) 2004
5  *          Lonnie Mendez (dignome@gmail.com) 
6  *      Copyright (C) 2003,2004
7  *          Neil Whelchel (koyama@firstlight.net)
8  *
9  *      This program is free software; you can redistribute it and/or modify
10  *      it under the terms of the GNU General Public License as published by
11  *      the Free Software Foundation; either version 2 of the License, or
12  *      (at your option) any later version.
13  *
14  * See Documentation/usb/usb-serial.txt for more information on using this driver
15  *
16  * See http://geocities.com/i0xox0i for information on this driver and the
17  * earthmate usb device.
18  *
19  *  Lonnie Mendez <dignome@gmail.com>
20  *  4-29-2005
21  *      Fixed problem where setting or retreiving the serial config would fail with
22  *      EPIPE.  Removed CRTS toggling so the driver behaves more like other usbserial
23  *      adapters.  Issued new interval of 1ms instead of the default 10ms.  As a
24  *      result, transfer speed has been substantially increased.  From avg. 850bps to
25  *      avg. 3300bps.  initial termios has also been modified.  Cleaned up code and
26  *      formatting issues so it is more readable.  Replaced the C++ style comments.
27  *
28  *  Lonnie Mendez <dignome@gmail.com>
29  *  12-15-2004
30  *      Incorporated write buffering from pl2303 driver.  Fixed bug with line
31  *      handling so both lines are raised in cypress_open. (was dropping rts)
32  *      Various code cleanups made as well along with other misc bug fixes.
33  *
34  *  Lonnie Mendez <dignome@gmail.com>
35  *  04-10-2004
36  *      Driver modified to support dynamic line settings.  Various improvments
37  *      and features.
38  *
39  *  Neil Whelchel
40  *  10-2003
41  *      Driver first released.
42  *
43  */
44
45 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
46 /* Thanks to cypress for providing references for the hid reports. */
47 /* Thanks to Jiang Zhang for providing links and for general help. */
48 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
49
50
51 #include <linux/kernel.h>
52 #include <linux/errno.h>
53 #include <linux/init.h>
54 #include <linux/slab.h>
55 #include <linux/tty.h>
56 #include <linux/tty_driver.h>
57 #include <linux/tty_flip.h>
58 #include <linux/module.h>
59 #include <linux/moduleparam.h>
60 #include <linux/spinlock.h>
61 #include <linux/usb.h>
62 #include <linux/usb/serial.h>
63 #include <linux/serial.h>
64 #include <linux/delay.h>
65 #include <asm/uaccess.h>
66
67 #include "cypress_m8.h"
68
69
70 #ifdef CONFIG_USB_SERIAL_DEBUG
71         static int debug = 1;
72 #else
73         static int debug;
74 #endif
75 static int stats;
76 static int interval;
77
78 /*
79  * Version Information
80  */
81 #define DRIVER_VERSION "v1.09"
82 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
83 #define DRIVER_DESC "Cypress USB to Serial Driver"
84
85 /* write buffer size defines */
86 #define CYPRESS_BUF_SIZE        1024
87 #define CYPRESS_CLOSING_WAIT    (30*HZ)
88
89 static struct usb_device_id id_table_earthmate [] = {
90         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
91         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
92         { }                                             /* Terminating entry */
93 };
94
95 static struct usb_device_id id_table_cyphidcomrs232 [] = {
96         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
97         { }                                             /* Terminating entry */
98 };
99
100 static struct usb_device_id id_table_nokiaca42v2 [] = {
101         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
102         { }                                             /* Terminating entry */
103 };
104
105 static struct usb_device_id id_table_combined [] = {
106         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
107         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
108         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
109         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
110         { }                                             /* Terminating entry */
111 };
112
113 MODULE_DEVICE_TABLE (usb, id_table_combined);
114
115 static struct usb_driver cypress_driver = {
116         .name =         "cypress",
117         .probe =        usb_serial_probe,
118         .disconnect =   usb_serial_disconnect,
119         .id_table =     id_table_combined,
120         .no_dynamic_id =        1,
121 };
122
123 struct cypress_private {
124         spinlock_t lock;                   /* private lock */
125         int chiptype;                      /* identifier of device, for quirks/etc */
126         int bytes_in;                      /* used for statistics */
127         int bytes_out;                     /* used for statistics */
128         int cmd_count;                     /* used for statistics */
129         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
130         struct cypress_buf *buf;           /* write buffer */
131         int write_urb_in_use;              /* write urb in use indicator */
132         int write_urb_interval;            /* interval to use for write urb */
133         int read_urb_interval;             /* interval to use for read urb */
134         int comm_is_ok;                    /* true if communication is (still) ok */
135         int termios_initialized;
136         __u8 line_control;                 /* holds dtr / rts value */
137         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
138         __u8 current_config;               /* stores the current configuration byte */
139         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
140         int baud_rate;                     /* stores current baud rate in integer form */
141         int cbr_mask;                      /* stores current baud rate in masked form */
142         int isthrottled;                   /* if throttled, discard reads */
143         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
144         char prev_status, diff_status;     /* used for TIOCMIWAIT */
145         /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
146         struct ktermios tmp_termios;       /* stores the old termios settings */
147 };
148
149 /* write buffer structure */
150 struct cypress_buf {
151         unsigned int    buf_size;
152         char            *buf_buf;
153         char            *buf_get;
154         char            *buf_put;
155 };
156
157 /* function prototypes for the Cypress USB to serial device */
158 static int  cypress_earthmate_startup   (struct usb_serial *serial);
159 static int  cypress_hidcom_startup      (struct usb_serial *serial);
160 static int  cypress_ca42v2_startup      (struct usb_serial *serial);
161 static void cypress_shutdown            (struct usb_serial *serial);
162 static int  cypress_open                (struct usb_serial_port *port, struct file *filp);
163 static void cypress_close               (struct usb_serial_port *port, struct file *filp);
164 static int  cypress_write               (struct usb_serial_port *port, const unsigned char *buf, int count);
165 static void cypress_send                (struct usb_serial_port *port);
166 static int  cypress_write_room          (struct usb_serial_port *port);
167 static int  cypress_ioctl               (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
168 static void cypress_set_termios         (struct usb_serial_port *port, struct ktermios * old);
169 static int  cypress_tiocmget            (struct usb_serial_port *port, struct file *file);
170 static int  cypress_tiocmset            (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
171 static int  cypress_chars_in_buffer     (struct usb_serial_port *port);
172 static void cypress_throttle            (struct usb_serial_port *port);
173 static void cypress_unthrottle          (struct usb_serial_port *port);
174 static void cypress_set_dead            (struct usb_serial_port *port);
175 static void cypress_read_int_callback   (struct urb *urb);
176 static void cypress_write_int_callback  (struct urb *urb);
177 /* baud helper functions */
178 static int       mask_to_rate           (unsigned mask);
179 static unsigned  rate_to_mask           (int rate);
180 /* write buffer functions */
181 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
182 static void               cypress_buf_free(struct cypress_buf *cb);
183 static void               cypress_buf_clear(struct cypress_buf *cb);
184 static unsigned int       cypress_buf_data_avail(struct cypress_buf *cb);
185 static unsigned int       cypress_buf_space_avail(struct cypress_buf *cb);
186 static unsigned int       cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
187 static unsigned int       cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
188
189
190 static struct usb_serial_driver cypress_earthmate_device = {
191         .driver = {
192                 .owner =                THIS_MODULE,
193                 .name =                 "earthmate",
194         },
195         .description =                  "DeLorme Earthmate USB",
196         .id_table =                     id_table_earthmate,
197         .num_interrupt_in =             1,
198         .num_interrupt_out =            1,
199         .num_bulk_in =                  NUM_DONT_CARE,
200         .num_bulk_out =                 NUM_DONT_CARE,
201         .num_ports =                    1,
202         .attach =                       cypress_earthmate_startup,
203         .shutdown =                     cypress_shutdown,
204         .open =                         cypress_open,
205         .close =                        cypress_close,
206         .write =                        cypress_write,
207         .write_room =                   cypress_write_room,
208         .ioctl =                        cypress_ioctl,
209         .set_termios =                  cypress_set_termios,
210         .tiocmget =                     cypress_tiocmget,
211         .tiocmset =                     cypress_tiocmset,
212         .chars_in_buffer =              cypress_chars_in_buffer,
213         .throttle =                     cypress_throttle,
214         .unthrottle =                   cypress_unthrottle,
215         .read_int_callback =            cypress_read_int_callback,
216         .write_int_callback =           cypress_write_int_callback,
217 };
218
219 static struct usb_serial_driver cypress_hidcom_device = {
220         .driver = {
221                 .owner =                THIS_MODULE,
222                 .name =                 "cyphidcom",
223         },
224         .description =                  "HID->COM RS232 Adapter",
225         .id_table =                     id_table_cyphidcomrs232,
226         .num_interrupt_in =             1,
227         .num_interrupt_out =            1,
228         .num_bulk_in =                  NUM_DONT_CARE,
229         .num_bulk_out =                 NUM_DONT_CARE,
230         .num_ports =                    1,
231         .attach =                       cypress_hidcom_startup,
232         .shutdown =                     cypress_shutdown,
233         .open =                         cypress_open,
234         .close =                        cypress_close,
235         .write =                        cypress_write,
236         .write_room =                   cypress_write_room,
237         .ioctl =                        cypress_ioctl,
238         .set_termios =                  cypress_set_termios,
239         .tiocmget =                     cypress_tiocmget,
240         .tiocmset =                     cypress_tiocmset,
241         .chars_in_buffer =              cypress_chars_in_buffer,
242         .throttle =                     cypress_throttle,
243         .unthrottle =                   cypress_unthrottle,
244         .read_int_callback =            cypress_read_int_callback,
245         .write_int_callback =           cypress_write_int_callback,
246 };
247
248 static struct usb_serial_driver cypress_ca42v2_device = {
249         .driver = {
250                 .owner =                THIS_MODULE,
251                 .name =                 "nokiaca42v2",
252         },
253         .description =                  "Nokia CA-42 V2 Adapter",
254         .id_table =                     id_table_nokiaca42v2,
255         .num_interrupt_in =             1,
256         .num_interrupt_out =            1,
257         .num_bulk_in =                  NUM_DONT_CARE,
258         .num_bulk_out =                 NUM_DONT_CARE,
259         .num_ports =                    1,
260         .attach =                       cypress_ca42v2_startup,
261         .shutdown =                     cypress_shutdown,
262         .open =                         cypress_open,
263         .close =                        cypress_close,
264         .write =                        cypress_write,
265         .write_room =                   cypress_write_room,
266         .ioctl =                        cypress_ioctl,
267         .set_termios =                  cypress_set_termios,
268         .tiocmget =                     cypress_tiocmget,
269         .tiocmset =                     cypress_tiocmset,
270         .chars_in_buffer =              cypress_chars_in_buffer,
271         .throttle =                     cypress_throttle,
272         .unthrottle =                   cypress_unthrottle,
273         .read_int_callback =            cypress_read_int_callback,
274         .write_int_callback =           cypress_write_int_callback,
275 };
276
277 /*****************************************************************************
278  * Cypress serial helper functions
279  *****************************************************************************/
280
281
282 /* This function can either set or retrieve the current serial line settings */
283 static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
284                                    int parity_enable, int parity_type, int reset, int cypress_request_type)
285 {
286         int new_baudrate = 0, retval = 0, tries = 0;
287         struct cypress_private *priv;
288         __u8 feature_buffer[8];
289         unsigned long flags;
290
291         dbg("%s", __FUNCTION__);
292         
293         priv = usb_get_serial_port_data(port);
294
295         if (!priv->comm_is_ok)
296                 return -ENODEV;
297
298         switch(cypress_request_type) {
299                 case CYPRESS_SET_CONFIG:
300
301                         /*
302                          * The general purpose firmware for the Cypress M8 allows for a maximum speed
303                          * of 57600bps (I have no idea whether DeLorme chose to use the general purpose
304                          * firmware or not), if you need to modify this speed setting for your own
305                          * project please add your own chiptype and modify the code likewise.  The
306                          * Cypress HID->COM device will work successfully up to 115200bps (but the
307                          * actual throughput is around 3kBps).
308                          */
309                         if (baud_mask != priv->cbr_mask) {
310                                 dbg("%s - baud rate is changing", __FUNCTION__);
311                                 if ( priv->chiptype == CT_EARTHMATE ) {
312                                         /* 300 and 600 baud rates are supported under the generic firmware,
313                                          * but are not used with NMEA and SiRF protocols */
314                                         
315                                         if ( (baud_mask == B300) || (baud_mask == B600) ) {
316                                                 err("%s - failed setting baud rate, unsupported speed",
317                                                     __FUNCTION__);
318                                                 new_baudrate = priv->baud_rate;
319                                         } else if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
320                                                 err("%s - failed setting baud rate, unsupported speed",
321                                                     __FUNCTION__);
322                                                 new_baudrate = priv->baud_rate;
323                                         }
324                                 } else if (priv->chiptype == CT_CYPHIDCOM) {
325                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
326                                                 err("%s - failed setting baud rate, unsupported speed",
327                                                     __FUNCTION__);
328                                                 new_baudrate = priv->baud_rate;
329                                         }
330                                 } else if (priv->chiptype == CT_CA42V2) {
331                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
332                                                 err("%s - failed setting baud rate, unsupported speed",
333                                                     __FUNCTION__);
334                                                 new_baudrate = priv->baud_rate;
335                                         }
336                                 } else if (priv->chiptype == CT_GENERIC) {
337                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
338                                                 err("%s - failed setting baud rate, unsupported speed",
339                                                     __FUNCTION__);
340                                                 new_baudrate = priv->baud_rate;
341                                         }
342                                 } else {
343                                         info("%s - please define your chiptype", __FUNCTION__);
344                                         new_baudrate = priv->baud_rate;
345                                 }
346                         } else {  /* baud rate not changing, keep the old */
347                                 new_baudrate = priv->baud_rate;
348                         }
349                         dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate);
350                         
351                         memset(feature_buffer, 0, 8);
352                         /* fill the feature_buffer with new configuration */
353                         *((u_int32_t *)feature_buffer) = new_baudrate;
354
355                         feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
356                         /* 1 bit gap */
357                         feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
358                         feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
359                         feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
360                         /* 1 bit gap */
361                         feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
362                                 
363                         dbg("%s - device is being sent this feature report:", __FUNCTION__);
364                         dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1],
365                             feature_buffer[2], feature_buffer[3], feature_buffer[4]);
366                         
367                         do {
368                         retval = usb_control_msg (port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
369                                                   HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
370                                                           0x0300, 0, feature_buffer, 8, 500);
371
372                                 if (tries++ >= 3)
373                                         break;
374
375                         } while (retval != 8 && retval != -ENODEV);
376
377                         if (retval != 8) {
378                                 err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
379                                 cypress_set_dead(port);
380                         } else {
381                                 spin_lock_irqsave(&priv->lock, flags);
382                                 priv->baud_rate = new_baudrate;
383                                 priv->cbr_mask = baud_mask;
384                                 priv->current_config = feature_buffer[4];
385                                 spin_unlock_irqrestore(&priv->lock, flags);
386                         }
387                 break;
388                 case CYPRESS_GET_CONFIG:
389                         dbg("%s - retreiving serial line settings", __FUNCTION__);
390                         /* set initial values in feature buffer */
391                         memset(feature_buffer, 0, 8);
392
393                         do {
394                         retval = usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
395                                                   HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
396                                                           0x0300, 0, feature_buffer, 8, 500);
397                                 
398                                 if (tries++ >= 3)
399                                         break;
400
401                         } while (retval != 5 && retval != -ENODEV);
402
403                         if (retval != 5) {
404                                 err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
405                                 cypress_set_dead(port);
406                                 return retval;
407                         } else {
408                                 spin_lock_irqsave(&priv->lock, flags);
409
410                                 /* store the config in one byte, and later use bit masks to check values */
411                                 priv->current_config = feature_buffer[4];
412                                 priv->baud_rate = *((u_int32_t *)feature_buffer);
413                                 
414                                 if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
415                                         dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
416                                 spin_unlock_irqrestore(&priv->lock, flags);
417                         }
418         }
419         spin_lock_irqsave(&priv->lock, flags);
420         ++priv->cmd_count;
421         spin_unlock_irqrestore(&priv->lock, flags);
422
423         return retval;
424 } /* cypress_serial_control */
425
426
427 static void cypress_set_dead(struct usb_serial_port *port)
428 {
429         struct cypress_private *priv = usb_get_serial_port_data(port);
430         unsigned long flags;
431
432         spin_lock_irqsave(&priv->lock, flags);
433         if (!priv->comm_is_ok) {
434                 spin_unlock_irqrestore(&priv->lock, flags);
435                 return;
436         }
437         priv->comm_is_ok = 0;
438         spin_unlock_irqrestore(&priv->lock, flags);
439
440         err("cypress_m8 suspending failing port %d - interval might be too short",
441             port->number);
442 }
443
444
445 /* given a baud mask, it will return integer baud on success */
446 static int mask_to_rate (unsigned mask)
447 {
448         int rate;
449
450         switch (mask) {
451                 case B0: rate = 0; break;
452                 case B300: rate = 300; break;
453                 case B600: rate = 600; break;
454                 case B1200: rate = 1200; break;
455                 case B2400: rate = 2400; break;
456                 case B4800: rate = 4800; break;
457                 case B9600: rate = 9600; break;
458                 case B19200: rate = 19200; break;
459                 case B38400: rate = 38400; break;
460                 case B57600: rate = 57600; break;
461                 case B115200: rate = 115200; break;
462                 default: rate = -1;
463         }
464
465         return rate;
466 }
467
468
469 static unsigned rate_to_mask (int rate)
470 {
471         unsigned mask;
472
473         switch (rate) {
474                 case 0: mask = B0; break;
475                 case 300: mask = B300; break;
476                 case 600: mask = B600; break;
477                 case 1200: mask = B1200; break;
478                 case 2400: mask = B2400; break;
479                 case 4800: mask = B4800; break;
480                 case 9600: mask = B9600; break;
481                 case 19200: mask = B19200; break;
482                 case 38400: mask = B38400; break;
483                 case 57600: mask = B57600; break;
484                 case 115200: mask = B115200; break;
485                 default: mask = 0x40;
486         }
487
488         return mask;
489 }
490 /*****************************************************************************
491  * Cypress serial driver functions
492  *****************************************************************************/
493
494
495 static int generic_startup (struct usb_serial *serial)
496 {
497         struct cypress_private *priv;
498         struct usb_serial_port *port = serial->port[0];
499
500         dbg("%s - port %d", __FUNCTION__, port->number);
501
502         priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
503         if (!priv)
504                 return -ENOMEM;
505
506         priv->comm_is_ok = !0;
507         spin_lock_init(&priv->lock);
508         priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
509         if (priv->buf == NULL) {
510                 kfree(priv);
511                 return -ENOMEM;
512         }
513         init_waitqueue_head(&priv->delta_msr_wait);
514         
515         usb_reset_configuration (serial->dev);
516         
517         priv->cmd_ctrl = 0;
518         priv->line_control = 0;
519         priv->termios_initialized = 0;
520         priv->rx_flags = 0;
521         priv->cbr_mask = B300;
522         if (interval > 0) {
523                 priv->write_urb_interval = interval;
524                 priv->read_urb_interval = interval;
525                 dbg("%s - port %d read & write intervals forced to %d",
526                     __FUNCTION__,port->number,interval);
527         } else {
528                 priv->write_urb_interval = port->interrupt_out_urb->interval;
529                 priv->read_urb_interval = port->interrupt_in_urb->interval;
530                 dbg("%s - port %d intervals: read=%d write=%d",
531                     __FUNCTION__,port->number,
532                     priv->read_urb_interval,priv->write_urb_interval);
533         }
534         usb_set_serial_port_data(port, priv);
535         
536         return 0;
537 }
538
539
540 static int cypress_earthmate_startup (struct usb_serial *serial)
541 {
542         struct cypress_private *priv;
543
544         dbg("%s", __FUNCTION__);
545
546         if (generic_startup(serial)) {
547                 dbg("%s - Failed setting up port %d", __FUNCTION__,
548                                 serial->port[0]->number);
549                 return 1;
550         }
551
552         priv = usb_get_serial_port_data(serial->port[0]);
553         priv->chiptype = CT_EARTHMATE;
554
555         return 0;
556 } /* cypress_earthmate_startup */
557
558
559 static int cypress_hidcom_startup (struct usb_serial *serial)
560 {
561         struct cypress_private *priv;
562
563         dbg("%s", __FUNCTION__);
564
565         if (generic_startup(serial)) {
566                 dbg("%s - Failed setting up port %d", __FUNCTION__,
567                                 serial->port[0]->number);
568                 return 1;
569         }
570
571         priv = usb_get_serial_port_data(serial->port[0]);
572         priv->chiptype = CT_CYPHIDCOM;
573         
574         return 0;
575 } /* cypress_hidcom_startup */
576
577
578 static int cypress_ca42v2_startup (struct usb_serial *serial)
579 {
580         struct cypress_private *priv;
581
582         dbg("%s", __FUNCTION__);
583
584         if (generic_startup(serial)) {
585                 dbg("%s - Failed setting up port %d", __FUNCTION__,
586                                 serial->port[0]->number);
587                 return 1;
588         }
589
590         priv = usb_get_serial_port_data(serial->port[0]);
591         priv->chiptype = CT_CA42V2;
592
593         return 0;
594 } /* cypress_ca42v2_startup */
595
596
597 static void cypress_shutdown (struct usb_serial *serial)
598 {
599         struct cypress_private *priv;
600
601         dbg ("%s - port %d", __FUNCTION__, serial->port[0]->number);
602
603         /* all open ports are closed at this point */
604
605         priv = usb_get_serial_port_data(serial->port[0]);
606
607         if (priv) {
608                 cypress_buf_free(priv->buf);
609                 kfree(priv);
610                 usb_set_serial_port_data(serial->port[0], NULL);
611         }
612 }
613
614
615 static int cypress_open (struct usb_serial_port *port, struct file *filp)
616 {
617         struct cypress_private *priv = usb_get_serial_port_data(port);
618         struct usb_serial *serial = port->serial;
619         unsigned long flags;
620         int result = 0;
621
622         dbg("%s - port %d", __FUNCTION__, port->number);
623
624         if (!priv->comm_is_ok)
625                 return -EIO;
626
627         /* clear halts before open */
628         usb_clear_halt(serial->dev, 0x81);
629         usb_clear_halt(serial->dev, 0x02);
630
631         spin_lock_irqsave(&priv->lock, flags);
632         /* reset read/write statistics */
633         priv->bytes_in = 0;
634         priv->bytes_out = 0;
635         priv->cmd_count = 0;
636         priv->rx_flags = 0;
637         spin_unlock_irqrestore(&priv->lock, flags);
638
639         /* setting to zero could cause data loss */
640         port->tty->low_latency = 1;
641
642         /* raise both lines and set termios */
643         spin_lock_irqsave(&priv->lock, flags);
644         priv->line_control = CONTROL_DTR | CONTROL_RTS;
645         priv->cmd_ctrl = 1;
646         spin_unlock_irqrestore(&priv->lock, flags);
647         result = cypress_write(port, NULL, 0);
648
649         if (result) {
650                 dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __FUNCTION__, result);
651                 return result;
652         } else
653                 dbg("%s - success setting the control lines", __FUNCTION__);    
654
655         cypress_set_termios(port, &priv->tmp_termios);
656
657         /* setup the port and start reading from the device */
658         if(!port->interrupt_in_urb){
659                 err("%s - interrupt_in_urb is empty!", __FUNCTION__);
660                 return(-1);
661         }
662
663         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
664                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
665                 port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
666                 cypress_read_int_callback, port, priv->read_urb_interval);
667         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
668
669         if (result){
670                 dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
671                 cypress_set_dead(port);
672         }
673
674         return result;
675 } /* cypress_open */
676
677
678 static void cypress_close(struct usb_serial_port *port, struct file * filp)
679 {
680         struct cypress_private *priv = usb_get_serial_port_data(port);
681         unsigned int c_cflag;
682         unsigned long flags;
683         int bps;
684         long timeout;
685         wait_queue_t wait;
686
687         dbg("%s - port %d", __FUNCTION__, port->number);
688
689         /* wait for data to drain from buffer */
690         spin_lock_irqsave(&priv->lock, flags);
691         timeout = CYPRESS_CLOSING_WAIT;
692         init_waitqueue_entry(&wait, current);
693         add_wait_queue(&port->tty->write_wait, &wait);
694         for (;;) {
695                 set_current_state(TASK_INTERRUPTIBLE);
696                 if (cypress_buf_data_avail(priv->buf) == 0
697                 || timeout == 0 || signal_pending(current)
698                 || !usb_get_intfdata(port->serial->interface))
699                         break;
700                 spin_unlock_irqrestore(&priv->lock, flags);
701                 timeout = schedule_timeout(timeout);
702                 spin_lock_irqsave(&priv->lock, flags);
703         }
704         set_current_state(TASK_RUNNING);
705         remove_wait_queue(&port->tty->write_wait, &wait);
706         /* clear out any remaining data in the buffer */
707         cypress_buf_clear(priv->buf);
708         spin_unlock_irqrestore(&priv->lock, flags);
709         
710         /* wait for characters to drain from device */
711         bps = tty_get_baud_rate(port->tty);
712         if (bps > 1200)
713                 timeout = max((HZ*2560)/bps,HZ/10);
714         else
715                 timeout = 2*HZ;
716         schedule_timeout_interruptible(timeout);
717
718         dbg("%s - stopping urbs", __FUNCTION__);
719         usb_kill_urb (port->interrupt_in_urb);
720         usb_kill_urb (port->interrupt_out_urb);
721
722         if (port->tty) {
723                 c_cflag = port->tty->termios->c_cflag;
724                 if (c_cflag & HUPCL) {
725                         /* drop dtr and rts */
726                         priv = usb_get_serial_port_data(port);
727                         spin_lock_irqsave(&priv->lock, flags);
728                         priv->line_control = 0;
729                         priv->cmd_ctrl = 1;
730                         spin_unlock_irqrestore(&priv->lock, flags);
731                         cypress_write(port, NULL, 0);
732                 }
733         }
734
735         if (stats)
736                 dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
737                           priv->bytes_in, priv->bytes_out, priv->cmd_count);
738 } /* cypress_close */
739
740
741 static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, int count)
742 {
743         struct cypress_private *priv = usb_get_serial_port_data(port);
744         unsigned long flags;
745         
746         dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
747
748         /* line control commands, which need to be executed immediately,
749            are not put into the buffer for obvious reasons.
750          */
751         if (priv->cmd_ctrl) {
752                 count = 0;
753                 goto finish;
754         }
755         
756         if (!count)
757                 return count;
758         
759         spin_lock_irqsave(&priv->lock, flags);
760         count = cypress_buf_put(priv->buf, buf, count);
761         spin_unlock_irqrestore(&priv->lock, flags);
762
763 finish:
764         cypress_send(port);
765
766         return count;
767 } /* cypress_write */
768
769
770 static void cypress_send(struct usb_serial_port *port)
771 {
772         int count = 0, result, offset, actual_size;
773         struct cypress_private *priv = usb_get_serial_port_data(port);
774         unsigned long flags;
775         
776         if (!priv->comm_is_ok)
777                 return;
778
779         dbg("%s - port %d", __FUNCTION__, port->number);
780         dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size);
781         
782         spin_lock_irqsave(&priv->lock, flags);
783         if (priv->write_urb_in_use) {
784                 dbg("%s - can't write, urb in use", __FUNCTION__);
785                 spin_unlock_irqrestore(&priv->lock, flags);
786                 return;
787         }
788         spin_unlock_irqrestore(&priv->lock, flags);
789
790         /* clear buffer */
791         memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);
792
793         spin_lock_irqsave(&priv->lock, flags);
794         switch (port->interrupt_out_size) {
795                 case 32:
796                         /* this is for the CY7C64013... */
797                         offset = 2;
798                         port->interrupt_out_buffer[0] = priv->line_control;
799                         break;
800                 case 8:
801                         /* this is for the CY7C63743... */
802                         offset = 1;
803                         port->interrupt_out_buffer[0] = priv->line_control;
804                         break;
805                 default:
806                         dbg("%s - wrong packet size", __FUNCTION__);
807                         spin_unlock_irqrestore(&priv->lock, flags);
808                         return;
809         }
810
811         if (priv->line_control & CONTROL_RESET)
812                 priv->line_control &= ~CONTROL_RESET;
813
814         if (priv->cmd_ctrl) {
815                 priv->cmd_count++;
816                 dbg("%s - line control command being issued", __FUNCTION__);
817                 spin_unlock_irqrestore(&priv->lock, flags);
818                 goto send;
819         } else
820                 spin_unlock_irqrestore(&priv->lock, flags);
821
822         count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
823                                 port->interrupt_out_size-offset);
824
825         if (count == 0) {
826                 return;
827         }
828
829         switch (port->interrupt_out_size) {
830                 case 32:
831                         port->interrupt_out_buffer[1] = count;
832                         break;
833                 case 8:
834                         port->interrupt_out_buffer[0] |= count;
835         }
836
837         dbg("%s - count is %d", __FUNCTION__, count);
838
839 send:
840         spin_lock_irqsave(&priv->lock, flags);
841         priv->write_urb_in_use = 1;
842         spin_unlock_irqrestore(&priv->lock, flags);
843
844         if (priv->cmd_ctrl)
845                 actual_size = 1;
846         else
847                 actual_size = count + (port->interrupt_out_size == 32 ? 2 : 1);
848         
849         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size,
850                               port->interrupt_out_urb->transfer_buffer);
851
852         usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
853                 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
854                 port->interrupt_out_buffer, port->interrupt_out_size,
855                 cypress_write_int_callback, port, priv->write_urb_interval);
856         result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
857         if (result) {
858                 dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
859                         result);
860                 priv->write_urb_in_use = 0;
861                 cypress_set_dead(port);
862         }
863
864         spin_lock_irqsave(&priv->lock, flags);
865         if (priv->cmd_ctrl) {
866                 priv->cmd_ctrl = 0;
867         }
868         priv->bytes_out += count; /* do not count the line control and size bytes */
869         spin_unlock_irqrestore(&priv->lock, flags);
870
871         usb_serial_port_softint(port);
872 } /* cypress_send */
873
874
875 /* returns how much space is available in the soft buffer */
876 static int cypress_write_room(struct usb_serial_port *port)
877 {
878         struct cypress_private *priv = usb_get_serial_port_data(port);
879         int room = 0;
880         unsigned long flags;
881
882         dbg("%s - port %d", __FUNCTION__, port->number);
883
884         spin_lock_irqsave(&priv->lock, flags);
885         room = cypress_buf_space_avail(priv->buf);
886         spin_unlock_irqrestore(&priv->lock, flags);
887
888         dbg("%s - returns %d", __FUNCTION__, room);
889         return room;
890 }
891
892
893 static int cypress_tiocmget (struct usb_serial_port *port, struct file *file)
894 {
895         struct cypress_private *priv = usb_get_serial_port_data(port);
896         __u8 status, control;
897         unsigned int result = 0;
898         unsigned long flags;
899         
900         dbg("%s - port %d", __FUNCTION__, port->number);
901
902         spin_lock_irqsave(&priv->lock, flags);
903         control = priv->line_control;
904         status = priv->current_status;
905         spin_unlock_irqrestore(&priv->lock, flags);
906
907         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
908                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
909                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
910                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
911                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
912                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
913
914         dbg("%s - result = %x", __FUNCTION__, result);
915
916         return result;
917 }
918
919
920 static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
921                                unsigned int set, unsigned int clear)
922 {
923         struct cypress_private *priv = usb_get_serial_port_data(port);
924         unsigned long flags;
925         
926         dbg("%s - port %d", __FUNCTION__, port->number);
927
928         spin_lock_irqsave(&priv->lock, flags);
929         if (set & TIOCM_RTS)
930                 priv->line_control |= CONTROL_RTS;
931         if (set & TIOCM_DTR)
932                 priv->line_control |= CONTROL_DTR;
933         if (clear & TIOCM_RTS)
934                 priv->line_control &= ~CONTROL_RTS;
935         if (clear & TIOCM_DTR)
936                 priv->line_control &= ~CONTROL_DTR;
937         spin_unlock_irqrestore(&priv->lock, flags);
938
939         priv->cmd_ctrl = 1;
940         return cypress_write(port, NULL, 0);
941 }
942
943
944 static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
945 {
946         struct cypress_private *priv = usb_get_serial_port_data(port);
947
948         dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
949
950         switch (cmd) {
951                 case TIOCGSERIAL:
952                         if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct ktermios))) {
953                                 return -EFAULT;
954                         }
955                         return (0);
956                         break;
957                 case TIOCSSERIAL:
958                         if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct ktermios))) {
959                                 return -EFAULT;
960                         }
961                         /* here we need to call cypress_set_termios to invoke the new settings */
962                         cypress_set_termios(port, &priv->tmp_termios);
963                         return (0);
964                         break;
965                 /* This code comes from drivers/char/serial.c and ftdi_sio.c */
966                 case TIOCMIWAIT:
967                         while (priv != NULL) {
968                                 interruptible_sleep_on(&priv->delta_msr_wait);
969                                 /* see if a signal did it */
970                                 if (signal_pending(current))
971                                         return -ERESTARTSYS;
972                                 else {
973                                         char diff = priv->diff_status;
974
975                                         if (diff == 0) {
976                                                 return -EIO; /* no change => error */
977                                         }
978                                         
979                                         /* consume all events */
980                                         priv->diff_status = 0;
981
982                                         /* return 0 if caller wanted to know about these bits */
983                                         if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
984                                              ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
985                                              ((arg & TIOCM_CD) && (diff & UART_CD)) ||
986                                              ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
987                                                 return 0;
988                                         }
989                                         /* otherwise caller can't care less about what happened,
990                                          * and so we continue to wait for more events.
991                                          */
992                                 }
993                         }
994                         return 0;
995                         break;
996                 default:
997                         break;
998         }
999
1000         dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __FUNCTION__, cmd);
1001
1002         return -ENOIOCTLCMD;
1003 } /* cypress_ioctl */
1004
1005
1006 static void cypress_set_termios (struct usb_serial_port *port,
1007                 struct ktermios *old_termios)
1008 {
1009         struct cypress_private *priv = usb_get_serial_port_data(port);
1010         struct tty_struct *tty;
1011         int data_bits, stop_bits, parity_type, parity_enable;
1012         unsigned cflag, iflag, baud_mask;
1013         unsigned long flags;
1014         __u8 oldlines;
1015         int linechange = 0;
1016
1017         dbg("%s - port %d", __FUNCTION__, port->number);
1018
1019         tty = port->tty;
1020         if ((!tty) || (!tty->termios)) {
1021                 dbg("%s - no tty structures", __FUNCTION__);
1022                 return;
1023         }
1024
1025         spin_lock_irqsave(&priv->lock, flags);
1026         if (!priv->termios_initialized) {
1027                 if (priv->chiptype == CT_EARTHMATE) {
1028                         *(tty->termios) = tty_std_termios;
1029                         tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
1030                                 CLOCAL;
1031                 } else if (priv->chiptype == CT_CYPHIDCOM) {
1032                         *(tty->termios) = tty_std_termios;
1033                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1034                                 CLOCAL;
1035                 } else if (priv->chiptype == CT_CA42V2) {
1036                         *(tty->termios) = tty_std_termios;
1037                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1038                                 CLOCAL;
1039                 }
1040                 priv->termios_initialized = 1;
1041         }
1042         spin_unlock_irqrestore(&priv->lock, flags);
1043
1044         cflag = tty->termios->c_cflag;
1045         iflag = tty->termios->c_iflag;
1046
1047         /* check if there are new settings */
1048         if (old_termios) {
1049                 if ((cflag != old_termios->c_cflag) ||
1050                         (RELEVANT_IFLAG(iflag) !=
1051                          RELEVANT_IFLAG(old_termios->c_iflag))) {
1052                         dbg("%s - attempting to set new termios settings",
1053                                         __FUNCTION__);
1054                         /* should make a copy of this in case something goes
1055                          * wrong in the function, we can restore it */
1056                         spin_lock_irqsave(&priv->lock, flags);
1057                         priv->tmp_termios = *(tty->termios);
1058                         spin_unlock_irqrestore(&priv->lock, flags);
1059                 } else {
1060                         dbg("%s - nothing to do, exiting", __FUNCTION__);
1061                         return;
1062                 }
1063         } else
1064                 return;
1065
1066         /* set number of data bits, parity, stop bits */
1067         /* when parity is disabled the parity type bit is ignored */
1068
1069         /* 1 means 2 stop bits, 0 means 1 stop bit */
1070         stop_bits = cflag & CSTOPB ? 1 : 0;
1071
1072         if (cflag & PARENB) {
1073                 parity_enable = 1;
1074                 /* 1 means odd parity, 0 means even parity */
1075                 parity_type = cflag & PARODD ? 1 : 0;
1076         } else
1077                 parity_enable = parity_type = 0;
1078
1079         if (cflag & CSIZE) {
1080                 switch (cflag & CSIZE) {
1081                         case CS5:
1082                                 data_bits = 0;
1083                                 break;
1084                         case CS6:
1085                                 data_bits = 1;
1086                                 break;
1087                         case CS7:
1088                                 data_bits = 2;
1089                                 break;
1090                         case CS8:
1091                                 data_bits = 3;
1092                                 break;
1093                         default:
1094                                 err("%s - CSIZE was set, but not CS5-CS8",
1095                                                 __FUNCTION__);
1096                                 data_bits = 3;
1097                 }
1098         } else
1099                 data_bits = 3;
1100
1101         spin_lock_irqsave(&priv->lock, flags);
1102         oldlines = priv->line_control;
1103         if ((cflag & CBAUD) == B0) {
1104                 /* drop dtr and rts */
1105                 dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
1106                 baud_mask = B0;
1107                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
1108         } else {
1109                 baud_mask = (cflag & CBAUD);
1110                 switch(baud_mask) {
1111                         case B300:
1112                                 dbg("%s - setting baud 300bps", __FUNCTION__);
1113                                 break;
1114                         case B600:
1115                                 dbg("%s - setting baud 600bps", __FUNCTION__);
1116                                 break;
1117                         case B1200:
1118                                 dbg("%s - setting baud 1200bps", __FUNCTION__);
1119                                 break;
1120                         case B2400:
1121                                 dbg("%s - setting baud 2400bps", __FUNCTION__);
1122                                 break;
1123                         case B4800:
1124                                 dbg("%s - setting baud 4800bps", __FUNCTION__);
1125                                 break;
1126                         case B9600:
1127                                 dbg("%s - setting baud 9600bps", __FUNCTION__);
1128                                 break;
1129                         case B19200:
1130                                 dbg("%s - setting baud 19200bps", __FUNCTION__);
1131                                 break;
1132                         case B38400:
1133                                 dbg("%s - setting baud 38400bps", __FUNCTION__);
1134                                 break;
1135                         case B57600:
1136                                 dbg("%s - setting baud 57600bps", __FUNCTION__);
1137                                 break;
1138                         case B115200:
1139                                 dbg("%s - setting baud 115200bps", __FUNCTION__);
1140                                 break;
1141                         default:
1142                                 dbg("%s - unknown masked baud rate", __FUNCTION__);
1143                 }
1144                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1145         }
1146         spin_unlock_irqrestore(&priv->lock, flags);
1147
1148         dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1149                         "%d data_bits (+5)", __FUNCTION__, stop_bits,
1150                         parity_enable, parity_type, data_bits);
1151
1152         cypress_serial_control(port, baud_mask, data_bits, stop_bits,
1153                         parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
1154
1155         /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1156          * filled into the private structure this should confirm that all is
1157          * working if it returns what we just set */
1158         cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1159
1160         /* Here we can define custom tty settings for devices; the main tty
1161          * termios flag base comes from empeg.c */
1162
1163         spin_lock_irqsave(&priv->lock, flags);
1164         if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
1165                 dbg("Using custom termios settings for a baud rate of "
1166                                 "4800bps.");
1167                 /* define custom termios settings for NMEA protocol */
1168
1169                 tty->termios->c_iflag /* input modes - */
1170                         &= ~(IGNBRK  /* disable ignore break */
1171                         | BRKINT     /* disable break causes interrupt */
1172                         | PARMRK     /* disable mark parity errors */
1173                         | ISTRIP     /* disable clear high bit of input char */
1174                         | INLCR      /* disable translate NL to CR */
1175                         | IGNCR      /* disable ignore CR */
1176                         | ICRNL      /* disable translate CR to NL */
1177                         | IXON);     /* disable enable XON/XOFF flow control */
1178
1179                 tty->termios->c_oflag /* output modes */
1180                         &= ~OPOST;    /* disable postprocess output char */
1181
1182                 tty->termios->c_lflag /* line discipline modes */
1183                         &= ~(ECHO     /* disable echo input characters */
1184                         | ECHONL      /* disable echo new line */
1185                         | ICANON      /* disable erase, kill, werase, and rprnt
1186                                          special characters */
1187                         | ISIG        /* disable interrupt, quit, and suspend
1188                                          special characters */
1189                         | IEXTEN);    /* disable non-POSIX special characters */
1190         } /* CT_CYPHIDCOM: Application should handle this for device */
1191
1192         linechange = (priv->line_control != oldlines);
1193         spin_unlock_irqrestore(&priv->lock, flags);
1194
1195         /* if necessary, set lines */
1196         if (linechange) {
1197                 priv->cmd_ctrl = 1;
1198                 cypress_write(port, NULL, 0);
1199         }
1200 } /* cypress_set_termios */
1201
1202
1203 /* returns amount of data still left in soft buffer */
1204 static int cypress_chars_in_buffer(struct usb_serial_port *port)
1205 {
1206         struct cypress_private *priv = usb_get_serial_port_data(port);
1207         int chars = 0;
1208         unsigned long flags;
1209
1210         dbg("%s - port %d", __FUNCTION__, port->number);
1211         
1212         spin_lock_irqsave(&priv->lock, flags);
1213         chars = cypress_buf_data_avail(priv->buf);
1214         spin_unlock_irqrestore(&priv->lock, flags);
1215
1216         dbg("%s - returns %d", __FUNCTION__, chars);
1217         return chars;
1218 }
1219
1220
1221 static void cypress_throttle (struct usb_serial_port *port)
1222 {
1223         struct cypress_private *priv = usb_get_serial_port_data(port);
1224         unsigned long flags;
1225
1226         dbg("%s - port %d", __FUNCTION__, port->number);
1227
1228         spin_lock_irqsave(&priv->lock, flags);
1229         priv->rx_flags = THROTTLED;
1230         spin_unlock_irqrestore(&priv->lock, flags);
1231 }
1232
1233
1234 static void cypress_unthrottle (struct usb_serial_port *port)
1235 {
1236         struct cypress_private *priv = usb_get_serial_port_data(port);
1237         int actually_throttled, result;
1238         unsigned long flags;
1239
1240         dbg("%s - port %d", __FUNCTION__, port->number);
1241
1242         spin_lock_irqsave(&priv->lock, flags);
1243         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1244         priv->rx_flags = 0;
1245         spin_unlock_irqrestore(&priv->lock, flags);
1246
1247         if (!priv->comm_is_ok)
1248                 return;
1249
1250         if (actually_throttled) {
1251                 port->interrupt_in_urb->dev = port->serial->dev;
1252
1253                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1254                 if (result) {
1255                         dev_err(&port->dev, "%s - failed submitting read urb, "
1256                                         "error %d\n", __FUNCTION__, result);
1257                         cypress_set_dead(port);
1258                 }
1259         }
1260 }
1261
1262
1263 static void cypress_read_int_callback(struct urb *urb)
1264 {
1265         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1266         struct cypress_private *priv = usb_get_serial_port_data(port);
1267         struct tty_struct *tty;
1268         unsigned char *data = urb->transfer_buffer;
1269         unsigned long flags;
1270         char tty_flag = TTY_NORMAL;
1271         int havedata = 0;
1272         int bytes = 0;
1273         int result;
1274         int i = 0;
1275
1276         dbg("%s - port %d", __FUNCTION__, port->number);
1277
1278         switch (urb->status) {
1279         case 0: /* success */
1280                 break;
1281         case -ECONNRESET:
1282         case -ENOENT:
1283         case -ESHUTDOWN:
1284                 /* precursor to disconnect so just go away */
1285                 return;
1286         case -EPIPE:
1287                 usb_clear_halt(port->serial->dev,0x81);
1288                 break;
1289         default:
1290                 /* something ugly is going on... */
1291                 dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
1292                         __FUNCTION__,urb->status);
1293                 cypress_set_dead(port);
1294                 return;
1295         }
1296
1297         spin_lock_irqsave(&priv->lock, flags);
1298         if (priv->rx_flags & THROTTLED) {
1299                 dbg("%s - now throttling", __FUNCTION__);
1300                 priv->rx_flags |= ACTUALLY_THROTTLED;
1301                 spin_unlock_irqrestore(&priv->lock, flags);
1302                 return;
1303         }
1304         spin_unlock_irqrestore(&priv->lock, flags);
1305
1306         tty = port->tty;
1307         if (!tty) {
1308                 dbg("%s - bad tty pointer - exiting", __FUNCTION__);
1309                 return;
1310         }
1311
1312         spin_lock_irqsave(&priv->lock, flags);
1313         switch(urb->actual_length) {
1314                 case 32:
1315                         /* This is for the CY7C64013... */
1316                         priv->current_status = data[0] & 0xF8;
1317                         bytes = data[1] + 2;
1318                         i = 2;
1319                         if (bytes > 2)
1320                                 havedata = 1;
1321                         break;
1322                 case 8:
1323                         /* This is for the CY7C63743... */
1324                         priv->current_status = data[0] & 0xF8;
1325                         bytes = (data[0] & 0x07) + 1;
1326                         i = 1;
1327                         if (bytes > 1)
1328                                 havedata = 1;
1329                         break;
1330                 default:
1331                         dbg("%s - wrong packet size - received %d bytes",
1332                                         __FUNCTION__, urb->actual_length);
1333                         spin_unlock_irqrestore(&priv->lock, flags);
1334                         goto continue_read;
1335         }
1336         spin_unlock_irqrestore(&priv->lock, flags);
1337
1338         usb_serial_debug_data (debug, &port->dev, __FUNCTION__,
1339                         urb->actual_length, data);
1340
1341         spin_lock_irqsave(&priv->lock, flags);
1342         /* check to see if status has changed */
1343         if (priv != NULL) {
1344                 if (priv->current_status != priv->prev_status) {
1345                         priv->diff_status |= priv->current_status ^
1346                                 priv->prev_status;
1347                         wake_up_interruptible(&priv->delta_msr_wait);
1348                         priv->prev_status = priv->current_status;
1349                 }
1350         }
1351         spin_unlock_irqrestore(&priv->lock, flags);
1352
1353         /* hangup, as defined in acm.c... this might be a bad place for it
1354          * though */
1355         if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1356                         !(priv->current_status & UART_CD)) {
1357                 dbg("%s - calling hangup", __FUNCTION__);
1358                 tty_hangup(tty);
1359                 goto continue_read;
1360         }
1361
1362         /* There is one error bit... I'm assuming it is a parity error
1363          * indicator as the generic firmware will set this bit to 1 if a
1364          * parity error occurs.
1365          * I can not find reference to any other error events. */
1366         spin_lock_irqsave(&priv->lock, flags);
1367         if (priv->current_status & CYP_ERROR) {
1368                 spin_unlock_irqrestore(&priv->lock, flags);
1369                 tty_flag = TTY_PARITY;
1370                 dbg("%s - Parity Error detected", __FUNCTION__);
1371         } else
1372                 spin_unlock_irqrestore(&priv->lock, flags);
1373
1374         /* process read if there is data other than line status */
1375         if (tty && (bytes > i)) {
1376                 bytes = tty_buffer_request_room(tty, bytes);
1377                 for (; i < bytes ; ++i) {
1378                         dbg("pushing byte number %d - %d - %c", i, data[i],
1379                                         data[i]);
1380                         tty_insert_flip_char(tty, data[i], tty_flag);
1381                 }
1382                 tty_flip_buffer_push(port->tty);
1383         }
1384
1385         spin_lock_irqsave(&priv->lock, flags);
1386         /* control and status byte(s) are also counted */
1387         priv->bytes_in += bytes;
1388         spin_unlock_irqrestore(&priv->lock, flags);
1389
1390 continue_read:
1391
1392         /* Continue trying to always read... unless the port has closed. */
1393
1394         if (port->open_count > 0 && priv->comm_is_ok) {
1395                 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1396                                 usb_rcvintpipe(port->serial->dev,
1397                                         port->interrupt_in_endpointAddress),
1398                                 port->interrupt_in_urb->transfer_buffer,
1399                                 port->interrupt_in_urb->transfer_buffer_length,
1400                                 cypress_read_int_callback, port, priv->read_urb_interval);
1401                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1402                 if (result) {
1403                         dev_err(&urb->dev->dev, "%s - failed resubmitting "
1404                                         "read urb, error %d\n", __FUNCTION__,
1405                                         result);
1406                         cypress_set_dead(port);
1407                 }
1408         }
1409
1410         return;
1411 } /* cypress_read_int_callback */
1412
1413
1414 static void cypress_write_int_callback(struct urb *urb)
1415 {
1416         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1417         struct cypress_private *priv = usb_get_serial_port_data(port);
1418         int result;
1419
1420         dbg("%s - port %d", __FUNCTION__, port->number);
1421         
1422         switch (urb->status) {
1423                 case 0:
1424                         /* success */
1425                         break;
1426                 case -ECONNRESET:
1427                 case -ENOENT:
1428                 case -ESHUTDOWN:
1429                         /* this urb is terminated, clean up */
1430                         dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
1431                         priv->write_urb_in_use = 0;
1432                         return;
1433                 case -EPIPE: /* no break needed; clear halt and resubmit */
1434                         if (!priv->comm_is_ok)
1435                                 break;
1436                         usb_clear_halt(port->serial->dev, 0x02);
1437                         /* error in the urb, so we have to resubmit it */
1438                         dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
1439                         port->interrupt_out_urb->transfer_buffer_length = 1;
1440                         port->interrupt_out_urb->dev = port->serial->dev;
1441                         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1442                         if (!result)
1443                                 return;
1444                         dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
1445                                 __FUNCTION__, result);
1446                         cypress_set_dead(port);
1447                         break;
1448                 default:
1449                         dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
1450                                 __FUNCTION__,urb->status);
1451                         cypress_set_dead(port);
1452                         break;
1453         }
1454         
1455         priv->write_urb_in_use = 0;
1456         
1457         /* send any buffered data */
1458         cypress_send(port);
1459 }
1460
1461
1462 /*****************************************************************************
1463  * Write buffer functions - buffering code from pl2303 used
1464  *****************************************************************************/
1465
1466 /*
1467  * cypress_buf_alloc
1468  *
1469  * Allocate a circular buffer and all associated memory.
1470  */
1471
1472 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1473 {
1474
1475         struct cypress_buf *cb;
1476
1477
1478         if (size == 0)
1479                 return NULL;
1480
1481         cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1482         if (cb == NULL)
1483                 return NULL;
1484
1485         cb->buf_buf = kmalloc(size, GFP_KERNEL);
1486         if (cb->buf_buf == NULL) {
1487                 kfree(cb);
1488                 return NULL;
1489         }
1490
1491         cb->buf_size = size;
1492         cb->buf_get = cb->buf_put = cb->buf_buf;
1493
1494         return cb;
1495
1496 }
1497
1498
1499 /*
1500  * cypress_buf_free
1501  *
1502  * Free the buffer and all associated memory.
1503  */
1504
1505 static void cypress_buf_free(struct cypress_buf *cb)
1506 {
1507         if (cb) {
1508                 kfree(cb->buf_buf);
1509                 kfree(cb);
1510         }
1511 }
1512
1513
1514 /*
1515  * cypress_buf_clear
1516  *
1517  * Clear out all data in the circular buffer.
1518  */
1519
1520 static void cypress_buf_clear(struct cypress_buf *cb)
1521 {
1522         if (cb != NULL)
1523                 cb->buf_get = cb->buf_put;
1524                 /* equivalent to a get of all data available */
1525 }
1526
1527
1528 /*
1529  * cypress_buf_data_avail
1530  *
1531  * Return the number of bytes of data available in the circular
1532  * buffer.
1533  */
1534
1535 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1536 {
1537         if (cb != NULL)
1538                 return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
1539         else
1540                 return 0;
1541 }
1542
1543
1544 /*
1545  * cypress_buf_space_avail
1546  *
1547  * Return the number of bytes of space available in the circular
1548  * buffer.
1549  */
1550
1551 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1552 {
1553         if (cb != NULL)
1554                 return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
1555         else
1556                 return 0;
1557 }
1558
1559
1560 /*
1561  * cypress_buf_put
1562  *
1563  * Copy data data from a user buffer and put it into the circular buffer.
1564  * Restrict to the amount of space available.
1565  *
1566  * Return the number of bytes copied.
1567  */
1568
1569 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1570         unsigned int count)
1571 {
1572
1573         unsigned int len;
1574
1575
1576         if (cb == NULL)
1577                 return 0;
1578
1579         len  = cypress_buf_space_avail(cb);
1580         if (count > len)
1581                 count = len;
1582
1583         if (count == 0)
1584                 return 0;
1585
1586         len = cb->buf_buf + cb->buf_size - cb->buf_put;
1587         if (count > len) {
1588                 memcpy(cb->buf_put, buf, len);
1589                 memcpy(cb->buf_buf, buf+len, count - len);
1590                 cb->buf_put = cb->buf_buf + count - len;
1591         } else {
1592                 memcpy(cb->buf_put, buf, count);
1593                 if (count < len)
1594                         cb->buf_put += count;
1595                 else /* count == len */
1596                         cb->buf_put = cb->buf_buf;
1597         }
1598
1599         return count;
1600
1601 }
1602
1603
1604 /*
1605  * cypress_buf_get
1606  *
1607  * Get data from the circular buffer and copy to the given buffer.
1608  * Restrict to the amount of data available.
1609  *
1610  * Return the number of bytes copied.
1611  */
1612
1613 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1614         unsigned int count)
1615 {
1616
1617         unsigned int len;
1618
1619
1620         if (cb == NULL)
1621                 return 0;
1622
1623         len = cypress_buf_data_avail(cb);
1624         if (count > len)
1625                 count = len;
1626
1627         if (count == 0)
1628                 return 0;
1629
1630         len = cb->buf_buf + cb->buf_size - cb->buf_get;
1631         if (count > len) {
1632                 memcpy(buf, cb->buf_get, len);
1633                 memcpy(buf+len, cb->buf_buf, count - len);
1634                 cb->buf_get = cb->buf_buf + count - len;
1635         } else {
1636                 memcpy(buf, cb->buf_get, count);
1637                 if (count < len)
1638                         cb->buf_get += count;
1639                 else /* count == len */
1640                         cb->buf_get = cb->buf_buf;
1641         }
1642
1643         return count;
1644
1645 }
1646
1647 /*****************************************************************************
1648  * Module functions
1649  *****************************************************************************/
1650
1651 static int __init cypress_init(void)
1652 {
1653         int retval;
1654         
1655         dbg("%s", __FUNCTION__);
1656         
1657         retval = usb_serial_register(&cypress_earthmate_device);
1658         if (retval)
1659                 goto failed_em_register;
1660         retval = usb_serial_register(&cypress_hidcom_device);
1661         if (retval)
1662                 goto failed_hidcom_register;
1663         retval = usb_serial_register(&cypress_ca42v2_device);
1664         if (retval)
1665                 goto failed_ca42v2_register;
1666         retval = usb_register(&cypress_driver);
1667         if (retval)
1668                 goto failed_usb_register;
1669
1670         info(DRIVER_DESC " " DRIVER_VERSION);
1671         return 0;
1672
1673 failed_usb_register:
1674         usb_serial_deregister(&cypress_ca42v2_device);
1675 failed_ca42v2_register:
1676         usb_serial_deregister(&cypress_hidcom_device);
1677 failed_hidcom_register:
1678         usb_serial_deregister(&cypress_earthmate_device);
1679 failed_em_register:
1680         return retval;
1681 }
1682
1683
1684 static void __exit cypress_exit (void)
1685 {
1686         dbg("%s", __FUNCTION__);
1687
1688         usb_deregister (&cypress_driver);
1689         usb_serial_deregister (&cypress_earthmate_device);
1690         usb_serial_deregister (&cypress_hidcom_device);
1691         usb_serial_deregister (&cypress_ca42v2_device);
1692 }
1693
1694
1695 module_init(cypress_init);
1696 module_exit(cypress_exit);
1697
1698 MODULE_AUTHOR( DRIVER_AUTHOR );
1699 MODULE_DESCRIPTION( DRIVER_DESC );
1700 MODULE_VERSION( DRIVER_VERSION );
1701 MODULE_LICENSE("GPL");
1702
1703 module_param(debug, bool, S_IRUGO | S_IWUSR);
1704 MODULE_PARM_DESC(debug, "Debug enabled or not");
1705 module_param(stats, bool, S_IRUGO | S_IWUSR);
1706 MODULE_PARM_DESC(stats, "Enable statistics or not");
1707 module_param(interval, int, S_IRUGO | S_IWUSR);
1708 MODULE_PARM_DESC(interval, "Overrides interrupt interval");