git.oblomov.eu Git - linux-2.6/blob - drivers/infiniband/hw/ipath/ipath_init_chip.c

   1 /*
   2  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
   3  *
   4  * This software is available to you under a choice of one of two
   5  * licenses.  You may choose to be licensed under the terms of the GNU
   6  * General Public License (GPL) Version 2, available from the file
   7  * COPYING in the main directory of this source tree, or the
   8  * OpenIB.org BSD license below:
   9  *
  10  *     Redistribution and use in source and binary forms, with or
  11  *     without modification, are permitted provided that the following
  12  *     conditions are met:
  13  *
  14  *      - Redistributions of source code must retain the above
  15  *        copyright notice, this list of conditions and the following
  16  *        disclaimer.
  17  *
  18  *      - Redistributions in binary form must reproduce the above
  19  *        copyright notice, this list of conditions and the following
  20  *        disclaimer in the documentation and/or other materials
  21  *        provided with the distribution.
  22  *
  23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  30  * SOFTWARE.
  31  */
  32
  33 #include <linux/pci.h>
  34 #include <linux/netdevice.h>
  35 #include <linux/vmalloc.h>
  36
  37 #include "ipath_kernel.h"
  38 #include "ips_common.h"
  39
  40 /*
  41  * min buffers we want to have per port, after driver
  42  */
  43 #define IPATH_MIN_USER_PORT_BUFCNT 8
  44
  45 /*
  46  * Number of ports we are configured to use (to allow for more pio
  47  * buffers per port, etc.)  Zero means use chip value.
  48  */
  49 static ushort ipath_cfgports;
  50
  51 module_param_named(cfgports, ipath_cfgports, ushort, S_IRUGO);
  52 MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
  53
  54 /*
  55  * Number of buffers reserved for driver (layered drivers and SMA
  56  * send).  Reserved at end of buffer list.   Initialized based on
  57  * number of PIO buffers if not set via module interface.
  58  * The problem with this is that it's global, but we'll use different
  59  * numbers for different chip types.  So the default value is not
  60  * very useful.  I've redefined it for the 1.3 release so that it's
  61  * zero unless set by the user to something else, in which case we
  62  * try to respect it.
  63  */
  64 static ushort ipath_kpiobufs;
  65
  66 static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
  67
  68 module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
  69                   &ipath_kpiobufs, S_IWUSR | S_IRUGO);
  70 MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
  71
  72 /**
  73  * create_port0_egr - allocate the eager TID buffers
  74  * @dd: the infinipath device
  75  *
  76  * This code is now quite different for user and kernel, because
  77  * the kernel uses skb's, for the accelerated network performance.
  78  * This is the kernel (port0) version.
  79  *
  80  * Allocate the eager TID buffers and program them into infinipath.
  81  * We use the network layer alloc_skb() allocator to allocate the
  82  * memory, and either use the buffers as is for things like SMA
  83  * packets, or pass the buffers up to the ipath layered driver and
  84  * thence the network layer, replacing them as we do so (see
  85  * ipath_rcv_layer()).
  86  */
  87 static int create_port0_egr(struct ipath_devdata *dd)
  88 {
  89         unsigned e, egrcnt;
  90         struct sk_buff **skbs;
  91         int ret;
  92
  93         egrcnt = dd->ipath_rcvegrcnt;
  94
  95         skbs = vmalloc(sizeof(*dd->ipath_port0_skbs) * egrcnt);
  96         if (skbs == NULL) {
  97                 ipath_dev_err(dd, "allocation error for eager TID "
  98                               "skb array\n");
  99                 ret = -ENOMEM;
 100                 goto bail;
 101         }
 102         for (e = 0; e < egrcnt; e++) {
 103                 /*
 104                  * This is a bit tricky in that we allocate extra
 105                  * space for 2 bytes of the 14 byte ethernet header.
 106                  * These two bytes are passed in the ipath header so
 107                  * the rest of the data is word aligned.  We allocate
 108                  * 4 bytes so that the data buffer stays word aligned.
 109                  * See ipath_kreceive() for more details.
 110                  */
 111                 skbs[e] = ipath_alloc_skb(dd, GFP_KERNEL);
 112                 if (!skbs[e]) {
 113                         ipath_dev_err(dd, "SKB allocation error for "
 114                                       "eager TID %u\n", e);
 115                         while (e != 0)
 116                                 dev_kfree_skb(skbs[--e]);
 117                         ret = -ENOMEM;
 118                         goto bail;
 119                 }
 120         }
 121         /*
 122          * After loop above, so we can test non-NULL to see if ready
 123          * to use at receive, etc.
 124          */
 125         dd->ipath_port0_skbs = skbs;
 126
 127         for (e = 0; e < egrcnt; e++) {
 128                 unsigned long phys =
 129                         virt_to_phys(dd->ipath_port0_skbs[e]->data);
 130                 dd->ipath_f_put_tid(dd, e + (u64 __iomem *)
 131                                     ((char __iomem *) dd->ipath_kregbase +
 132                                      dd->ipath_rcvegrbase), 0, phys);
 133         }
 134
 135         ret = 0;
 136
 137 bail:
 138         return ret;
 139 }
 140
 141 static int bringup_link(struct ipath_devdata *dd)
 142 {
 143         u64 val, ibc;
 144         int ret = 0;
 145
 146         /* hold IBC in reset */
 147         dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
 148         ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
 149                          dd->ipath_control);
 150
 151         /*
 152          * Note that prior to try 14 or 15 of IB, the credit scaling
 153          * wasn't working, because it was swapped for writes with the
 154          * 1 bit default linkstate field
 155          */
 156
 157         /* ignore pbc and align word */
 158         val = dd->ipath_piosize2k - 2 * sizeof(u32);
 159         /*
 160          * for ICRC, which we only send in diag test pkt mode, and we
 161          * don't need to worry about that for mtu
 162          */
 163         val += 1;
 164         /*
 165          * Set the IBC maxpktlength to the size of our pio buffers the
 166          * maxpktlength is in words.  This is *not* the IB data MTU.
 167          */
 168         ibc = (val / sizeof(u32)) << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
 169         /* in KB */
 170         ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
 171         /*
 172          * How often flowctrl sent.  More or less in usecs; balance against
 173          * watermark value, so that in theory senders always get a flow
 174          * control update in time to not let the IB link go idle.
 175          */
 176         ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT;
 177         /* max error tolerance */
 178         ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
 179         /* use "real" buffer space for */
 180         ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT;
 181         /* IB credit flow control. */
 182         ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
 183         /* initially come up waiting for TS1, without sending anything. */
 184         dd->ipath_ibcctrl = ibc;
 185         /*
 186          * Want to start out with both LINKCMD and LINKINITCMD in NOP
 187          * (0 and 0).  Don't put linkinitcmd in ipath_ibcctrl, want that
 188          * to stay a NOP
 189          */
 190         ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
 191                 INFINIPATH_IBCC_LINKINITCMD_SHIFT;
 192         ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
 193                    (unsigned long long) ibc);
 194         ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);
 195
 196         // be sure chip saw it
 197         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
 198
 199         ret = dd->ipath_f_bringup_serdes(dd);
 200
 201         if (ret)
 202                 dev_info(&dd->pcidev->dev, "Could not initialize SerDes, "
 203                          "not usable\n");
 204         else {
 205                 /* enable IBC */
 206                 dd->ipath_control |= INFINIPATH_C_LINKENABLE;
 207                 ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
 208                                  dd->ipath_control);
 209         }
 210
 211         return ret;
 212 }
 213
 214 static int init_chip_first(struct ipath_devdata *dd,
 215                            struct ipath_portdata **pdp)
 216 {
 217         struct ipath_portdata *pd = NULL;
 218         int ret = 0;
 219         u64 val;
 220
 221         /*
 222          * skip cfgports stuff because we are not allocating memory,
 223          * and we don't want problems if the portcnt changed due to
 224          * cfgports.  We do still check and report a difference, if
 225          * not same (should be impossible).
 226          */
 227         dd->ipath_portcnt =
 228                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
 229         if (!ipath_cfgports)
 230                 dd->ipath_cfgports = dd->ipath_portcnt;
 231         else if (ipath_cfgports <= dd->ipath_portcnt) {
 232                 dd->ipath_cfgports = ipath_cfgports;
 233                 ipath_dbg("Configured to use %u ports out of %u in chip\n",
 234                           dd->ipath_cfgports, dd->ipath_portcnt);
 235         } else {
 236                 dd->ipath_cfgports = dd->ipath_portcnt;
 237                 ipath_dbg("Tried to configured to use %u ports; chip "
 238                           "only supports %u\n", ipath_cfgports,
 239                           dd->ipath_portcnt);
 240         }
 241         dd->ipath_pd = kzalloc(sizeof(*dd->ipath_pd) * dd->ipath_cfgports,
 242                                GFP_KERNEL);
 243
 244         if (!dd->ipath_pd) {
 245                 ipath_dev_err(dd, "Unable to allocate portdata array, "
 246                               "failing\n");
 247                 ret = -ENOMEM;
 248                 goto done;
 249         }
 250
 251         dd->ipath_lastegrheads = kzalloc(sizeof(*dd->ipath_lastegrheads)
 252                                          * dd->ipath_cfgports,
 253                                          GFP_KERNEL);
 254         dd->ipath_lastrcvhdrqtails =
 255                 kzalloc(sizeof(*dd->ipath_lastrcvhdrqtails)
 256                         * dd->ipath_cfgports, GFP_KERNEL);
 257
 258         if (!dd->ipath_lastegrheads || !dd->ipath_lastrcvhdrqtails) {
 259                 ipath_dev_err(dd, "Unable to allocate head arrays, "
 260                               "failing\n");
 261                 ret = -ENOMEM;
 262                 goto done;
 263         }
 264
 265         dd->ipath_pd[0] = kzalloc(sizeof(*pd), GFP_KERNEL);
 266
 267         if (!dd->ipath_pd[0]) {
 268                 ipath_dev_err(dd, "Unable to allocate portdata for port "
 269                               "0, failing\n");
 270                 ret = -ENOMEM;
 271                 goto done;
 272         }
 273         pd = dd->ipath_pd[0];
 274         pd->port_dd = dd;
 275         pd->port_port = 0;
 276         pd->port_cnt = 1;
 277         /* The port 0 pkey table is used by the layer interface. */
 278         pd->port_pkeys[0] = IPS_DEFAULT_P_KEY;
 279         dd->ipath_rcvtidcnt =
 280                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
 281         dd->ipath_rcvtidbase =
 282                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
 283         dd->ipath_rcvegrcnt =
 284                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
 285         dd->ipath_rcvegrbase =
 286                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
 287         dd->ipath_palign =
 288                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
 289         dd->ipath_piobufbase =
 290                 ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufbase);
 291         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
 292         dd->ipath_piosize2k = val & ~0U;
 293         dd->ipath_piosize4k = val >> 32;
 294         dd->ipath_ibmtu = 4096; /* default to largest legal MTU */
 295         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
 296         dd->ipath_piobcnt2k = val & ~0U;
 297         dd->ipath_piobcnt4k = val >> 32;
 298         dd->ipath_pio2kbase =
 299                 (u32 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
 300                                  (dd->ipath_piobufbase & 0xffffffff));
 301         if (dd->ipath_piobcnt4k) {
 302                 dd->ipath_pio4kbase = (u32 __iomem *)
 303                         (((char __iomem *) dd->ipath_kregbase) +
 304                          (dd->ipath_piobufbase >> 32));
 305                 /*
 306                  * 4K buffers take 2 pages; we use roundup just to be
 307                  * paranoid; we calculate it once here, rather than on
 308                  * ever buf allocate
 309                  */
 310                 dd->ipath_4kalign = ALIGN(dd->ipath_piosize4k,
 311                                           dd->ipath_palign);
 312                 ipath_dbg("%u 2k(%x) piobufs @ %p, %u 4k(%x) @ %p "
 313                           "(%x aligned)\n",
 314                           dd->ipath_piobcnt2k, dd->ipath_piosize2k,
 315                           dd->ipath_pio2kbase, dd->ipath_piobcnt4k,
 316                           dd->ipath_piosize4k, dd->ipath_pio4kbase,
 317                           dd->ipath_4kalign);
 318         }
 319         else ipath_dbg("%u 2k piobufs @ %p\n",
 320                        dd->ipath_piobcnt2k, dd->ipath_pio2kbase);
 321
 322         spin_lock_init(&dd->ipath_tid_lock);
 323
 324 done:
 325         *pdp = pd;
 326         return ret;
 327 }
 328
 329 /**
 330  * init_chip_reset - re-initialize after a reset, or enable
 331  * @dd: the infinipath device
 332  * @pdp: output for port data
 333  *
 334  * sanity check at least some of the values after reset, and
 335  * ensure no receive or transmit (explictly, in case reset
 336  * failed
 337  */
 338 static int init_chip_reset(struct ipath_devdata *dd,
 339                            struct ipath_portdata **pdp)
 340 {
 341         struct ipath_portdata *pd;
 342         u32 rtmp;
 343
 344         *pdp = pd = dd->ipath_pd[0];
 345         /* ensure chip does no sends or receives while we re-initialize */
 346         dd->ipath_control = dd->ipath_sendctrl = dd->ipath_rcvctrl = 0U;
 347         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, 0);
 348         ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0);
 349         ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0);
 350
 351         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
 352         if (dd->ipath_portcnt != rtmp)
 353                 dev_info(&dd->pcidev->dev, "portcnt was %u before "
 354                          "reset, now %u, using original\n",
 355                          dd->ipath_portcnt, rtmp);
 356         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
 357         if (rtmp != dd->ipath_rcvtidcnt)
 358                 dev_info(&dd->pcidev->dev, "tidcnt was %u before "
 359                          "reset, now %u, using original\n",
 360                          dd->ipath_rcvtidcnt, rtmp);
 361         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
 362         if (rtmp != dd->ipath_rcvtidbase)
 363                 dev_info(&dd->pcidev->dev, "tidbase was %u before "
 364                          "reset, now %u, using original\n",
 365                          dd->ipath_rcvtidbase, rtmp);
 366         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
 367         if (rtmp != dd->ipath_rcvegrcnt)
 368                 dev_info(&dd->pcidev->dev, "egrcnt was %u before "
 369                          "reset, now %u, using original\n",
 370                          dd->ipath_rcvegrcnt, rtmp);
 371         rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
 372         if (rtmp != dd->ipath_rcvegrbase)
 373                 dev_info(&dd->pcidev->dev, "egrbase was %u before "
 374                          "reset, now %u, using original\n",
 375                          dd->ipath_rcvegrbase, rtmp);
 376
 377         return 0;
 378 }
 379
 380 static int init_pioavailregs(struct ipath_devdata *dd)
 381 {
 382         int ret;
 383
 384         dd->ipath_pioavailregs_dma = dma_alloc_coherent(
 385                 &dd->pcidev->dev, PAGE_SIZE, &dd->ipath_pioavailregs_phys,
 386                 GFP_KERNEL);
 387         if (!dd->ipath_pioavailregs_dma) {
 388                 ipath_dev_err(dd, "failed to allocate PIOavail reg area "
 389                               "in memory\n");
 390                 ret = -ENOMEM;
 391                 goto done;
 392         }
 393
 394         /*
 395          * we really want L2 cache aligned, but for current CPUs of
 396          * interest, they are the same.
 397          */
 398         dd->ipath_statusp = (u64 *)
 399                 ((char *)dd->ipath_pioavailregs_dma +
 400                  ((2 * L1_CACHE_BYTES +
 401                    dd->ipath_pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
 402         /* copy the current value now that it's really allocated */
 403         *dd->ipath_statusp = dd->_ipath_status;
 404         /*
 405          * setup buffer to hold freeze msg, accessible to apps,
 406          * following statusp
 407          */
 408         dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1];
 409         /* and its length */
 410         dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);
 411
 412         if (dd->ipath_unit * 64 > (IPATH_PORT0_RCVHDRTAIL_SIZE - 64)) {
 413                 ipath_dev_err(dd, "unit %u too large for port 0 "
 414                               "rcvhdrtail buffer size\n", dd->ipath_unit);
 415                 ret = -ENODEV;
 416         }
 417         else
 418                 ret = 0;
 419
 420         /* so we can get current tail in ipath_kreceive(), per chip */
 421         dd->ipath_hdrqtailptr = &ipath_port0_rcvhdrtail[
 422                 dd->ipath_unit * (64 / sizeof(*ipath_port0_rcvhdrtail))];
 423 done:
 424         return ret;
 425 }
 426
 427 /**
 428  * init_shadow_tids - allocate the shadow TID array
 429  * @dd: the infinipath device
 430  *
 431  * allocate the shadow TID array, so we can ipath_munlock previous
 432  * entries.  It may make more sense to move the pageshadow to the
 433  * port data structure, so we only allocate memory for ports actually
 434  * in use, since we at 8k per port, now.
 435  */
 436 static void init_shadow_tids(struct ipath_devdata *dd)
 437 {
 438         dd->ipath_pageshadow = (struct page **)
 439                 vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
 440                         sizeof(struct page *));
 441         if (!dd->ipath_pageshadow)
 442                 ipath_dev_err(dd, "failed to allocate shadow page * "
 443                               "array, no expected sends!\n");
 444         else
 445                 memset(dd->ipath_pageshadow, 0,
 446                        dd->ipath_cfgports * dd->ipath_rcvtidcnt *
 447                        sizeof(struct page *));
 448 }
 449
 450 static void enable_chip(struct ipath_devdata *dd,
 451                         struct ipath_portdata *pd, int reinit)
 452 {
 453         u32 val;
 454         int i;
 455
 456         if (!reinit) {
 457                 init_waitqueue_head(&ipath_sma_state_wait);
 458         }
 459         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
 460                          dd->ipath_rcvctrl);
 461
 462         /* Enable PIO send, and update of PIOavail regs to memory. */
 463         dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE |
 464                 INFINIPATH_S_PIOBUFAVAILUPD;
 465         ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 466                          dd->ipath_sendctrl);
 467
 468         /*
 469          * enable port 0 receive, and receive interrupt.  other ports
 470          * done as user opens and inits them.
 471          */
 472         dd->ipath_rcvctrl = INFINIPATH_R_TAILUPD |
 473                 (1ULL << INFINIPATH_R_PORTENABLE_SHIFT) |
 474                 (1ULL << INFINIPATH_R_INTRAVAIL_SHIFT);
 475         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
 476                          dd->ipath_rcvctrl);
 477
 478         /*
 479          * now ready for use.  this should be cleared whenever we
 480          * detect a reset, or initiate one.
 481          */
 482         dd->ipath_flags |= IPATH_INITTED;
 483
 484         /*
 485          * init our shadow copies of head from tail values, and write
 486          * head values to match.
 487          */
 488         val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
 489         (void)ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
 490         dd->ipath_port0head = ipath_read_ureg32(dd, ur_rcvhdrtail, 0);
 491
 492         /* Initialize so we interrupt on next packet received */
 493         (void)ipath_write_ureg(dd, ur_rcvhdrhead,
 494                                dd->ipath_rhdrhead_intr_off |
 495                                dd->ipath_port0head, 0);
 496
 497         /*
 498          * by now pioavail updates to memory should have occurred, so
 499          * copy them into our working/shadow registers; this is in
 500          * case something went wrong with abort, but mostly to get the
 501          * initial values of the generation bit correct.
 502          */
 503         for (i = 0; i < dd->ipath_pioavregs; i++) {
 504                 __le64 val;
 505
 506                 /*
 507                  * Chip Errata bug 6641; even and odd qwords>3 are swapped.
 508                  */
 509                 if (i > 3) {
 510                         if (i & 1)
 511                                 val = dd->ipath_pioavailregs_dma[i - 1];
 512                         else
 513                                 val = dd->ipath_pioavailregs_dma[i + 1];
 514                 }
 515                 else
 516                         val = dd->ipath_pioavailregs_dma[i];
 517                 dd->ipath_pioavailshadow[i] = le64_to_cpu(val);
 518         }
 519         /* can get counters, stats, etc. */
 520         dd->ipath_flags |= IPATH_PRESENT;
 521 }
 522
 523 static int init_housekeeping(struct ipath_devdata *dd,
 524                              struct ipath_portdata **pdp, int reinit)
 525 {
 526         char boardn[32];
 527         int ret = 0;
 528
 529         /*
 530          * have to clear shadow copies of registers at init that are
 531          * not otherwise set here, or all kinds of bizarre things
 532          * happen with driver on chip reset
 533          */
 534         dd->ipath_rcvhdrsize = 0;
 535
 536         /*
 537          * Don't clear ipath_flags as 8bit mode was set before
 538          * entering this func. However, we do set the linkstate to
 539          * unknown, so we can watch for a transition.
 540          * PRESENT is set because we want register reads to work,
 541          * and the kernel infrastructure saw it in config space;
 542          * We clear it if we have failures.
 543          */
 544         dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
 545         dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
 546                              IPATH_LINKDOWN | IPATH_LINKINIT);
 547
 548         ipath_cdbg(VERBOSE, "Try to read spc chip revision\n");
 549         dd->ipath_revision =
 550                 ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
 551
 552         /*
 553          * set up fundamental info we need to use the chip; we assume
 554          * if the revision reg and these regs are OK, we don't need to
 555          * special case the rest
 556          */
 557         dd->ipath_sregbase =
 558                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_sendregbase);
 559         dd->ipath_cregbase =
 560                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_counterregbase);
 561         dd->ipath_uregbase =
 562                 ipath_read_kreg32(dd, dd->ipath_kregs->kr_userregbase);
 563         ipath_cdbg(VERBOSE, "ipath_kregbase %p, sendbase %x usrbase %x, "
 564                    "cntrbase %x\n", dd->ipath_kregbase, dd->ipath_sregbase,
 565                    dd->ipath_uregbase, dd->ipath_cregbase);
 566         if ((dd->ipath_revision & 0xffffffff) == 0xffffffff
 567             || (dd->ipath_sregbase & 0xffffffff) == 0xffffffff
 568             || (dd->ipath_cregbase & 0xffffffff) == 0xffffffff
 569             || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
 570                 ipath_dev_err(dd, "Register read failures from chip, "
 571                               "giving up initialization\n");
 572                 dd->ipath_flags &= ~IPATH_PRESENT;
 573                 ret = -ENODEV;
 574                 goto done;
 575         }
 576
 577         /* clear the initial reset flag, in case first driver load */
 578         ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
 579                          INFINIPATH_E_RESET);
 580
 581         if (reinit)
 582                 ret = init_chip_reset(dd, pdp);
 583         else
 584                 ret = init_chip_first(dd, pdp);
 585
 586         if (ret)
 587                 goto done;
 588
 589         ipath_cdbg(VERBOSE, "Revision %llx (PCI %x), %u ports, %u tids, "
 590                    "%u egrtids\n", (unsigned long long) dd->ipath_revision,
 591                    dd->ipath_pcirev, dd->ipath_portcnt, dd->ipath_rcvtidcnt,
 592                    dd->ipath_rcvegrcnt);
 593
 594         if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) &
 595              INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) {
 596                 ipath_dev_err(dd, "Driver only handles version %d, "
 597                               "chip swversion is %d (%llx), failng\n",
 598                               IPATH_CHIP_SWVERSION,
 599                               (int)(dd->ipath_revision >>
 600                                     INFINIPATH_R_SOFTWARE_SHIFT) &
 601                               INFINIPATH_R_SOFTWARE_MASK,
 602                               (unsigned long long) dd->ipath_revision);
 603                 ret = -ENOSYS;
 604                 goto done;
 605         }
 606         dd->ipath_majrev = (u8) ((dd->ipath_revision >>
 607                                   INFINIPATH_R_CHIPREVMAJOR_SHIFT) &
 608                                  INFINIPATH_R_CHIPREVMAJOR_MASK);
 609         dd->ipath_minrev = (u8) ((dd->ipath_revision >>
 610                                   INFINIPATH_R_CHIPREVMINOR_SHIFT) &
 611                                  INFINIPATH_R_CHIPREVMINOR_MASK);
 612         dd->ipath_boardrev = (u8) ((dd->ipath_revision >>
 613                                     INFINIPATH_R_BOARDID_SHIFT) &
 614                                    INFINIPATH_R_BOARDID_MASK);
 615
 616         ret = dd->ipath_f_get_boardname(dd, boardn, sizeof boardn);
 617
 618         snprintf(dd->ipath_boardversion, sizeof(dd->ipath_boardversion),
 619                  "Driver %u.%u, %s, InfiniPath%u %u.%u, PCI %u, "
 620                  "SW Compat %u\n",
 621                  IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn,
 622                  (unsigned)(dd->ipath_revision >> INFINIPATH_R_ARCH_SHIFT) &
 623                  INFINIPATH_R_ARCH_MASK,
 624                  dd->ipath_majrev, dd->ipath_minrev, dd->ipath_pcirev,
 625                  (unsigned)(dd->ipath_revision >>
 626                             INFINIPATH_R_SOFTWARE_SHIFT) &
 627                  INFINIPATH_R_SOFTWARE_MASK);
 628
 629         ipath_dbg("%s", dd->ipath_boardversion);
 630
 631 done:
 632         return ret;
 633 }
 634
 635
 636 /**
 637  * ipath_init_chip - do the actual initialization sequence on the chip
 638  * @dd: the infinipath device
 639  * @reinit: reinitializing, so don't allocate new memory
 640  *
 641  * Do the actual initialization sequence on the chip.  This is done
 642  * both from the init routine called from the PCI infrastructure, and
 643  * when we reset the chip, or detect that it was reset internally,
 644  * or it's administratively re-enabled.
 645  *
 646  * Memory allocation here and in called routines is only done in
 647  * the first case (reinit == 0).  We have to be careful, because even
 648  * without memory allocation, we need to re-write all the chip registers
 649  * TIDs, etc. after the reset or enable has completed.
 650  */
 651 int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 652 {
 653         int ret = 0, i;
 654         u32 val32, kpiobufs;
 655         u64 val, atmp;
 656         struct ipath_portdata *pd = NULL; /* keep gcc4 happy */
 657
 658         ret = init_housekeeping(dd, &pd, reinit);
 659         if (ret)
 660                 goto done;
 661
 662         /*
 663          * we ignore most issues after reporting them, but have to specially
 664          * handle hardware-disabled chips.
 665          */
 666         if (ret == 2) {
 667                 /* unique error, known to ipath_init_one */
 668                 ret = -EPERM;
 669                 goto done;
 670         }
 671
 672         /*
 673          * We could bump this to allow for full rcvegrcnt + rcvtidcnt,
 674          * but then it no longer nicely fits power of two, and since
 675          * we now use routines that backend onto __get_free_pages, the
 676          * rest would be wasted.
 677          */
 678         dd->ipath_rcvhdrcnt = dd->ipath_rcvegrcnt;
 679         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt,
 680                          dd->ipath_rcvhdrcnt);
 681
 682         /*
 683          * Set up the shadow copies of the piobufavail registers,
 684          * which we compare against the chip registers for now, and
 685          * the in memory DMA'ed copies of the registers.  This has to
 686          * be done early, before we calculate lastport, etc.
 687          */
 688         val = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
 689         /*
 690          * calc number of pioavail registers, and save it; we have 2
 691          * bits per buffer.
 692          */
 693         dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2)
 694                 / (sizeof(u64) * BITS_PER_BYTE / 2);
 695         if (ipath_kpiobufs == 0) {
 696                 /* not set by user, or set explictly to default  */
 697                 if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128)
 698                         kpiobufs = 32;
 699                 else
 700                         kpiobufs = 16;
 701         }
 702         else
 703                 kpiobufs = ipath_kpiobufs;
 704
 705         if (kpiobufs >
 706             (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
 707              (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT))) {
 708                 i = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
 709                         (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT);
 710                 if (i < 0)
 711                         i = 0;
 712                 dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs for "
 713                          "kernel leaves too few for %d user ports "
 714                          "(%d each); using %u\n", kpiobufs,
 715                          dd->ipath_cfgports - 1,
 716                          IPATH_MIN_USER_PORT_BUFCNT, i);
 717                 /*
 718                  * shouldn't change ipath_kpiobufs, because could be
 719                  * different for different devices...
 720                  */
 721                 kpiobufs = i;
 722         }
 723         dd->ipath_lastport_piobuf =
 724                 dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - kpiobufs;
 725         dd->ipath_pbufsport = dd->ipath_cfgports > 1
 726                 ? dd->ipath_lastport_piobuf / (dd->ipath_cfgports - 1)
 727                 : 0;
 728         val32 = dd->ipath_lastport_piobuf -
 729                 (dd->ipath_pbufsport * (dd->ipath_cfgports - 1));
 730         if (val32 > 0) {
 731                 ipath_dbg("allocating %u pbufs/port leaves %u unused, "
 732                           "add to kernel\n", dd->ipath_pbufsport, val32);
 733                 dd->ipath_lastport_piobuf -= val32;
 734                 ipath_dbg("%u pbufs/port leaves %u unused, add to kernel\n",
 735                           dd->ipath_pbufsport, val32);
 736         }
 737         dd->ipath_lastpioindex = dd->ipath_lastport_piobuf;
 738         ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
 739                    "each for %u user ports\n", kpiobufs,
 740                    dd->ipath_piobcnt2k + dd->ipath_piobcnt4k,
 741                    dd->ipath_pbufsport, dd->ipath_cfgports - 1);
 742
 743         dd->ipath_f_early_init(dd);
 744
 745         /* early_init sets rcvhdrentsize and rcvhdrsize, so this must be
 746          * done after early_init */
 747         dd->ipath_hdrqlast =
 748                 dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
 749         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize,
 750                          dd->ipath_rcvhdrentsize);
 751         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
 752                          dd->ipath_rcvhdrsize);
 753
 754         if (!reinit) {
 755                 ret = init_pioavailregs(dd);
 756                 init_shadow_tids(dd);
 757                 if (ret)
 758                         goto done;
 759         }
 760
 761         (void)ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
 762                                dd->ipath_pioavailregs_phys);
 763         /*
 764          * this is to detect s/w errors, which the h/w works around by
 765          * ignoring the low 6 bits of address, if it wasn't aligned.
 766          */
 767         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpioavailaddr);
 768         if (val != dd->ipath_pioavailregs_phys) {
 769                 ipath_dev_err(dd, "Catastrophic software error, "
 770                               "SendPIOAvailAddr written as %lx, "
 771                               "read back as %llx\n",
 772                               (unsigned long) dd->ipath_pioavailregs_phys,
 773                               (unsigned long long) val);
 774                 ret = -EINVAL;
 775                 goto done;
 776         }
 777
 778         val = ipath_port0_rcvhdrtail_dma + dd->ipath_unit * 64;
 779
 780         /* verify that the alignment requirement was met */
 781         ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
 782                               0, val);
 783         atmp = ipath_read_kreg64_port(
 784                 dd, dd->ipath_kregs->kr_rcvhdrtailaddr, 0);
 785         if (val != atmp) {
 786                 ipath_dev_err(dd, "Catastrophic software error, "
 787                               "RcvHdrTailAddr0 written as %llx, "
 788                               "read back as %llx from %x\n",
 789                               (unsigned long long) val,
 790                               (unsigned long long) atmp,
 791                               dd->ipath_kregs->kr_rcvhdrtailaddr);
 792                 ret = -EINVAL;
 793                 goto done;
 794         }
 795
 796         ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP);
 797
 798         /*
 799          * make sure we are not in freeze, and PIO send enabled, so
 800          * writes to pbc happen
 801          */
 802         ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, 0ULL);
 803         ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
 804                          ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
 805         ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
 806         ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 807                          INFINIPATH_S_PIOENABLE);
 808
 809         /*
 810          * before error clears, since we expect serdes pll errors during
 811          * this, the first time after reset
 812          */
 813         if (bringup_link(dd)) {
 814                 dev_info(&dd->pcidev->dev, "Failed to bringup IB link\n");
 815                 ret = -ENETDOWN;
 816                 goto done;
 817         }
 818
 819         /*
 820          * clear any "expected" hwerrs from reset and/or initialization
 821          * clear any that aren't enabled (at least this once), and then
 822          * set the enable mask
 823          */
 824         dd->ipath_f_init_hwerrors(dd);
 825         ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
 826                          ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
 827         ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
 828                          dd->ipath_hwerrmask);
 829
 830         dd->ipath_maskederrs = dd->ipath_ignorederrs;
 831         /* clear all */
 832         ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
 833         /* enable errors that are masked, at least this first time. */
 834         ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
 835                          ~dd->ipath_maskederrs);
 836         /* clear any interrups up to this point (ints still not enabled) */
 837         ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
 838
 839         ipath_stats.sps_lid[dd->ipath_unit] = dd->ipath_lid;
 840
 841         /*
 842          * Set up the port 0 (kernel) rcvhdr q and egr TIDs.  If doing
 843          * re-init, the simplest way to handle this is to free
 844          * existing, and re-allocate.
 845          */
 846         if (reinit)
 847                 ipath_free_pddata(dd, 0, 0);
 848         dd->ipath_f_tidtemplate(dd);
 849         ret = ipath_create_rcvhdrq(dd, pd);
 850         if (!ret)
 851                 ret = create_port0_egr(dd);
 852         if (ret)
 853                 ipath_dev_err(dd, "failed to allocate port 0 (kernel) "
 854                               "rcvhdrq and/or egr bufs\n");
 855         else
 856                 enable_chip(dd, pd, reinit);
 857
 858         /*
 859          * cause retrigger of pending interrupts ignored during init,
 860          * even if we had errors
 861          */
 862         ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
 863
 864         if(!dd->ipath_stats_timer_active) {
 865                 /*
 866                  * first init, or after an admin disable/enable
 867                  * set up stats retrieval timer, even if we had errors
 868                  * in last portion of setup
 869                  */
 870                 init_timer(&dd->ipath_stats_timer);
 871                 dd->ipath_stats_timer.function = ipath_get_faststats;
 872                 dd->ipath_stats_timer.data = (unsigned long) dd;
 873                 /* every 5 seconds; */
 874                 dd->ipath_stats_timer.expires = jiffies + 5 * HZ;
 875                 /* takes ~16 seconds to overflow at full IB 4x bandwdith */
 876                 add_timer(&dd->ipath_stats_timer);
 877                 dd->ipath_stats_timer_active = 1;
 878         }
 879
 880 done:
 881         if (!ret) {
 882                 *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
 883                 if (!dd->ipath_f_intrsetup(dd)) {
 884                         /* now we can enable all interrupts from the chip */
 885                         ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
 886                                          -1LL);
 887                         /* force re-interrupt of any pending interrupts. */
 888                         ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear,
 889                                          0ULL);
 890                         /* chip is usable; mark it as initialized */
 891                         *dd->ipath_statusp |= IPATH_STATUS_INITTED;
 892                 } else
 893                         ipath_dev_err(dd, "No interrupts enabled, couldn't "
 894                                       "setup interrupt address\n");
 895
 896                 if (dd->ipath_cfgports > ipath_stats.sps_nports)
 897                         /*
 898                          * sps_nports is a global, so, we set it to
 899                          * the highest number of ports of any of the
 900                          * chips we find; we never decrement it, at
 901                          * least for now.  Since this might have changed
 902                          * over disable/enable or prior to reset, always
 903                          * do the check and potentially adjust.
 904                          */
 905                         ipath_stats.sps_nports = dd->ipath_cfgports;
 906         } else
 907                 ipath_dbg("Failed (%d) to initialize chip\n", ret);
 908
 909         /* if ret is non-zero, we probably should do some cleanup
 910            here... */
 911         return ret;
 912 }
 913
 914 static int ipath_set_kpiobufs(const char *str, struct kernel_param *kp)
 915 {
 916         struct ipath_devdata *dd;
 917         unsigned long flags;
 918         unsigned short val;
 919         int ret;
 920
 921         ret = ipath_parse_ushort(str, &val);
 922
 923         spin_lock_irqsave(&ipath_devs_lock, flags);
 924
 925         if (ret < 0)
 926                 goto bail;
 927
 928         if (val == 0) {
 929                 ret = -EINVAL;
 930                 goto bail;
 931         }
 932
 933         list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
 934                 if (dd->ipath_kregbase)
 935                         continue;
 936                 if (val > (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
 937                            (dd->ipath_cfgports *
 938                             IPATH_MIN_USER_PORT_BUFCNT)))
 939                 {
 940                         ipath_dev_err(
 941                                 dd,
 942                                 "Allocating %d PIO bufs for kernel leaves "
 943                                 "too few for %d user ports (%d each)\n",
 944                                 val, dd->ipath_cfgports - 1,
 945                                 IPATH_MIN_USER_PORT_BUFCNT);
 946                         ret = -EINVAL;
 947                         goto bail;
 948                 }
 949                 dd->ipath_lastport_piobuf =
 950                         dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - val;
 951         }
 952
 953         ret = 0;
 954 bail:
 955         spin_unlock_irqrestore(&ipath_devs_lock, flags);
 956
 957         return ret;
 958 }